???global.info.a_carregar???
Ricardo J. C. Carbas is currently a post-doctoral researcher in the Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI) - Department of Mechanical Engineering at the Faculty of Engineering of the University of Porto (FEUP). He obtained his PhD in adhesively bonded functionally graded joints from Faculty of Engineering of the University of Porto in 2013. His research activity focuses on mechanical characterisation of stuctural adhesives, experimental testing and numerical simulation of adhesive joints, with special attention to develop techniques to improve the performance of composite joints under different type of loads (quasi-static, impact or fatigue). He developed a technique of functionally graded cure by induction heating. He is editor-in-chief of Engineering Manufacturing Letters (EML) journal (FEUP). He is involved in the organization of conferences on materials and adhesive bonding: Luso-Brazilian Adhesion Conference (CLBA), International Conference on Materials Design and Applications (MDA), Advanced Joining Processes (AJP) and Ibero-American Conference on Composite Materials (IAMaC). He is editorial board member of the 'Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications', 'Journal of Advanced Joining Processes' and 'Materials'. It has six patents mainly on production methods and testing of structural adhesive bonds. He does consulting work for national (e.g. Bosch, Amtrol) and international (e.g. Honda, Nagase Chemtex, John Deere, Safran, Infineon, Henkel, etc.) companies.
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Ricardo João Camilo Carbas

Nomes de citação

  • Carbas, Ricardo
  • Carbas, R. J. C.

Identificadores de autor

Ciência ID
7417-3B09-C0FC
ORCID iD
0000-0002-1933-0865
Researcher Id
I-7432-2015
Scopus Author Id
55977169100

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica - Engenharia Mecânica
  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais - Engenharia dos Materiais
Formação
Grau Classificação
2011
Concluído
 Engenharia Mecânica (Doutoramento)
Especialização em Sem especialidade
Universidade do Porto Faculdade de Engenharia, Portugal
"Adhesively bonded functionally graded joints " (TESE/DISSERTAÇÃO)
2008
Concluído
 Mestrado Integrado em Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
"Estudo praramétrico de juntas adesivas pelo método de taguchi" (TESE/DISSERTAÇÃO)
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento 		Empregador
2017/10/06 - Atual Professor Auxiliar Convidado (Docente Universitário) Universidade do Porto, Portugal
2017 - 2019 Professor Auxiliar Convidado (Docente Universitário) Universidade do Porto, Portugal
2017 - 2019 Professor Auxiliar Convidado (Docente Universitário) Universidade do Porto, Portugal
2016 - 2018 Assistente convidado (Docente Ensino Superior Politécnico) Instituto Politécnico do Cávado e do Ave, Portugal
2015 - 2016 Assistente (Docente Ensino Superior Politécnico) Instituto Politécnico do Cávado e do Ave Escola Superior de Tecnologia, Portugal
2015 - 2016 Assistente (Docente Ensino Superior Politécnico) Instituto Politécnico do Cávado e do Ave Escola Superior de Tecnologia, Portugal
2015 - 2016 Assistente (Docente Ensino Superior Politécnico) Instituto Politécnico do Cávado e do Ave Escola Superior de Tecnologia, Portugal
2014 - 2015 Professor Auxiliar (Docente Universitário) Universidade Lusíada de Vila Nova de Famalicão, Portugal
2014 - 2015 Professor Auxiliar (Docente Universitário) Universidade Lusíada de Vila Nova de Famalicão, Portugal
2014 - 2015 Professor Auxiliar (Docente Universitário) Universidade Lusíada de Vila Nova de Famalicão, Portugal

Outros

Categoria Profissional
Instituição de acolhimento 		Empregador
2020/09/01 - Atual Investigador auxiliar Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
2014/07/01 - 2020/08/30 Postdoctoral researcher in a project funded by FCT. Reference: SFRH / BPD / 96992/2013 Title of project: "Novel adhesive bonding joint concept using fibre metal laminates". Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
2013/09/01 - 2014/02/28 Research fellow in a European project ENLIGHT funded by the European Commission. Project Reference: SCP2-GA-2012-314567 Project Title: Enhanced Lightweight Design (ENLIGHT) Associated Laboratory for Energy Transports and Aeronautics, Portugal
2010/03/01 - 2013/08/31 Research fellow of a project funded by FCT. Project reference: PTDC / EME-PME / 098571/2008 Project title: 'Adhesively bonded functionally graded joints' Associated Laboratory for Energy Transports and Aeronautics, Portugal
Projetos

Bolsa

Designação Financiadores
2014/07/01 - 2020/08/31 NOVEL ADHESIVE BONDING JOINT CONCEPT USING FIBRE METAL LAMINATES
SFRH/BPD/96992/2013
 Fundação para a Ciência e a Tecnologia
Concluído
2014/07/01 - 2020/08/31 NOVEL ADHESIVE BONDING JOINT CONCEPT USING FIBRE METAL LAMINATES
SFRH/BPD/96992/2013
 Fundação para a Ciência e a Tecnologia
Concluído
2014/07/01 - 2020/08/31 NOVEL ADHESIVE BONDING JOINT CONCEPT USING FIBRE METAL LAMINATES
SFRH/BPD/96992/2013
 Fundação para a Ciência e a Tecnologia
Concluído
2014/07/01 - 2020/08/31 NOVEL ADHESIVE BONDING JOINT CONCEPT USING FIBRE METAL LAMINATES
SFRH/BPD/96992/2013
 Fundação para a Ciência e a Tecnologia
Concluído
2014/07/01 - 2019/06/30 NOVEL ADHESIVE BONDING JOINT CONCEPT USING FIBRE METAL LAMINATES
SFRH/BPD/96992/2013
Bolseiro de Pós-Doutoramento
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Em curso

Projeto

Designação Financiadores
2020/09/01 - 2026/08/31 Não Disponível
CEECIND/03276/2018/CP1562/CT0001
10.54499/CEECIND/03276/2018/CP1562/CT0001
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Em curso
2020/09/01 - 2026/08/31 Não Disponível
CEECIND/03276/2018/CP1562/CT0001
10.54499/CEECIND/03276/2018/CP1562/CT0001
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Em curso
2020/09/01 - 2026/08/31 Não Disponível
CEECIND/03276/2018/CP1562/CT0001
10.54499/CEECIND/03276/2018/CP1562/CT0001
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Em curso
2020/09/01 - 2026/08/31 Not Available
CEECIND/03276/2018/CP1562/CT0001
10.54499/CEECIND/03276/2018/CP1562/CT0001
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Em curso
2021/01/01 - 2025/12/31 Laboratório Associado em Energia, Transportes e Aeroespacial
LA/P/0079/2020
10.54499/LA/P/0079/2020
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2021/01/01 - 2025/12/31 Laboratório Associado em Energia, Transportes e Aeroespacial
LA/P/0079/2020
10.54499/LA/P/0079/2020
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2021/01/01 - 2025/12/31 Laboratório Associado em Energia, Transportes e Aeroespacial
LA/P/0079/2020
10.54499/LA/P/0079/2020
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2021/01/01 - 2025/12/31 Associate Laboratory of Energy, Transports and Aerospace.
LA/P/0079/2020
10.54499/LA/P/0079/2020
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2022/01/13 - 2025/01/12 New approaches to improve the joint strength and reduce the delamination of composite adhesive joints
PTDC/EME-EME/2728/2021
Investigador responsável
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
2022/01/13 - 2025/01/12 Novas abordagens para melhorar a resistência e reduzir a delaminação das juntas adesivas com substratos compósitos
PTDC/EME-EME/2728/2021
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2022/01/13 - 2025/01/12 Novas abordagens para melhorar a resistência e reduzir a delaminação das juntas adesivas com substratos compósitos
PTDC/EME-EME/2728/2021
10.54499/PTDC/EME-EME/2728/2021
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2022/01/13 - 2025/01/12 Novas abordagens para melhorar a resistência e reduzir a delaminação das juntas adesivas com substratos compósitos
PTDC/EME-EME/2728/2021
10.54499/PTDC/EME-EME/2728/2021
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2022/01/13 - 2025/01/12 Novas abordagens para melhorar a resistência e reduzir a delaminação das juntas adesivas com substratos compósitos
PTDC/EME-EME/2728/2021
10.54499/PTDC/EME-EME/2728/2021
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2022/01/13 - 2025/01/12 New approaches to improve the joint strength and reduce the delamination of composite adhesive joints
PTDC/EME-EME/2728/2021
10.54499/PTDC/EME-EME/2728/2021
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2020/01/01 - 2023/12/31 Laboratório Associado de Energia, Transportes e Aeronáutica
UIDB/50022/2020
10.54499/UIDB/50022/2020
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2018/07/26 - 2022/07/25 Desenvolvimento de modelos constitutivos e ferramentas para o projeto estático e dinâmico de ligações adesivas estruturais
PTDC/EME-EME/28351/2017
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2018/07/26 - 2022/07/25 Desenvolvimento de modelos constitutivos e ferramentas para o projeto estático e dinâmico de ligações adesivas estruturais
PTDC/EME-EME/28351/2017
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2018/07/26 - 2022/07/25 Desenvolvimento de modelos constitutivos e ferramentas para o projeto estático e dinâmico de ligações adesivas estruturais
PTDC/EME-EME/28351/2017
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2018/07/26 - 2022/07/25 Desenvolvimento de modelos constitutivos e ferramentas para o projeto estático e dinâmico de ligações adesivas estruturais
PTDC/EME-EME/28351/2017
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2018/07/26 - 2022/07/25 Development of constitutive models and tools for the static and dynamic design of structural adhesive joints
PTDC/EME-EME/28351/2017
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2018/07/02 - 2021/12/31 Juntas adesivas graduadas com aplicação de micro partículas de cortiça
PTDC/EME-EME/28035/2017
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2018/07/02 - 2021/12/31 Juntas adesivas graduadas com aplicação de micro partículas de cortiça
PTDC/EME-EME/28035/2017
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2018/07/02 - 2021/12/31 Juntas adesivas graduadas com aplicação de micro partículas de cortiça
PTDC/EME-EME/28035/2017
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2018/07/02 - 2021/12/31 Juntas adesivas graduadas com aplicação de micro partículas de cortiça
PTDC/EME-EME/28035/2017
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2018/07/02 - 2021/12/31 Adhesively bonded graded joints using magnetized cork micro particles
PTDC/EME-EME/28035/2017
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2018/07/26 - 2021/07/25 Desenvolvimento de modelos constitutivos e ferramentas para o projeto estático e dinâmico de ligações adesivas estruturais
PTDC/EME-EME/28351/2017
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Em curso
2018/07/02 - 2021/07/01 Juntas adesivas graduadas com aplicação de micro partículas de cortiça
PTDC/EME-EME/28035/2017
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
 Fundação para a Ciência e a Tecnologia
Em curso
2014/07/01 - 2020/08/31 NOVEL ADHESIVE BONDING JOINT CONCEPT USING FIBRE METAL LAMINATES
SFRH/BPD/96992/2013
 Fundação para a Ciência e a Tecnologia
Concluído
2019/01/01 - 2019/12/31 Laboratório Associado de Energia, Transportes e Aeronáutica
UID/EMS/50022/2019
Instituto de Engenharia Mecânica, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2019/01/01 - 2019/12/31 Laboratório Associado de Energia, Transportes e Aeronáutica
UID/EMS/50022/2019
Instituto de Engenharia Mecânica, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2019/01/01 - 2019/12/31 Laboratório Associado de Energia, Transportes e Aeronáutica
UID/EMS/50022/2019
Instituto de Engenharia Mecânica, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2019/01/01 - 2019/12/31 Associate Laboratory of Energy, Transports and Aeronautics
UID/EMS/50022/2019
Instituto de Engenharia Mecânica, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2013/09/01 - 2014/06/30 ENLIGHT
Grant 314567
Bolseiro de Investigação
Concluído
2010/03/01 - 2013/08/31 Adhesively bonded functionally graded joints
PTDC/EME-PME/098571/2008
Bolseiro de Investigação
Fundação para a Ciência e a Tecnologia
Produções

Publicações

Artigo em conferência
  1. Nakada, Satoshi; Furusawa, Toru; Yokoi, Eiichiro; Carbas, R; Costa, M; Marques, E; Viana, G; Silva, LFM da. "Influence of Ductility Ingredients of Structural Adhesives on Fracture Energy under Static Mixed-Mode Loading". 2017.
    10.4271/2017-01-0473
  2. Gálvez, P.; Carbas, R.J.C.; Campilho, R.; Abenojar, J.; Martínez, M.A.; Da Silva, L.F.M.. "Fracture toughness in Mode i (GIC) for ductile adhesives". 2017.
    10.1088/1742-6596/843/1/012008
Artigo em jornal
  1. Carbas, R. J. C.. "Effect of the adhesive thickness on butt adhesive joints under torsional loads", Journal of Advanced Joining Processes, 2021, 3, https://doi.org/10.1016/j.jajp.2021.100061.
  2. Carbas, R. J. C.. "Fatigue behaviour of an adhesive under mixed-mode conditions", Tecnologia em Metalurgia, Materiais e Mineração, 2021, 18, http://dx.doi.org/10.4322/2176-1523.20212463.
Artigo em revista
  1. F.C. Sousa; A. Akhavan-Safar; R.J.C. Carbas; E.A.S. Marques; R. Goyal; J. Jennings; L.F.M. da Silva. "Investigation of geometric and material effects on the fatigue performance of composite and steel adhesive joints". Composite Structures (2024): https://doi.org/10.1016/j.compstruct.2024.118313.
    10.1016/j.compstruct.2024.118313
  2. D.S. Correia; R.J.F. de Sousa; P.N. Gomes; R.J.C. Carbas; E.A.S. Marques; L.F.M. da Silva. "Experimental study on toughening UV pre-curing adhesives for electrically conductive applications". International Journal of Adhesion and Adhesives (2024): https://doi.org/10.1016/j.ijadhadh.2024.103795.
    10.1016/j.ijadhadh.2024.103795
  3. Fatih Huzeyfe Öztürk; E. A. S. Marques; R. J. C. Carbas; L. F. M. da Silva. "Experimental and numerical study on mechanical behavior of 3D printed adhesive joints with polycarbonate substrates". Journal of Applied Polymer Science (2024): https://doi.org/10.1002/app.55657.
    10.1002/app.55657
  4. R.M. Carneiro Neto; E.F. Vogas; A. Akhavan-Safar; R.J.C. Carbas; E.M. Sampaio; L.F.M. da Silva. "Impact of surface preparation method on the fracture toughness of adhesive joints subjected to diverse loading modes". International Journal of Adhesion and Adhesives (2024): https://doi.org/10.1016/j.ijadhadh.2024.103763.
    10.1016/j.ijadhadh.2024.103763
  5. Hossein Malekinejad; Ricardo Carbas; Alireza Akhavan-Safar; Eduardo A. S. Marques; Cristina Maria Caldas Ferreira; Lucas da Silva. "Bio-Inspired Helicoidal Composite Structure Featuring Graded Variable Ply Pitch under Transverse Tensile Loading". Journal of Composites Science (2024): https://www.mdpi.com/2504-477X/8/6/228.
    10.3390/jcs8060228
  6. M. Ribas; A. Akhavan-Safar; R.J.C. Carbas; E.A.S. Marques; S. Wenig; L.F.M. da Silva. "Mixed mode fatigue crack growth and fatigue threshold analysis in polyurethane adhesives at elevated temperatures". International Journal of Fatigue (2024): https://doi.org/10.1016/j.ijfatigue.2024.108275.
    10.1016/j.ijfatigue.2024.108275
  7. D. Santos; A. Akhavan-Safar; R.J.C. Carbas; E.A.S. Marques; Sabine Wenig; L.F.M. da Silva. "Mode I fatigue threshold energy assessment of a polyurethane adhesive: effects of temperature and Paris law relation". The Journal of Adhesion (2024): https://doi.org/10.1080/00218464.2023.2225415.
    10.1080/00218464.2023.2225415
  8. Hossein Malekinejad; Farin Ramezani; Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "Study of CFRP Laminate Gradually Modified throughout the Thickness Using Thin Ply under Transvers Tensile Loading". Materials (2024): https://doi.org/10.3390/ma17102388.
    10.3390/ma17102388
  9. Mazaher Salamat-Talab; Ali Zeinolabedin-Beygi; Faraz Soltani; Alireza Akhavan-Safar; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Tensile Strength and Mode I Fracture Toughness of Polymer Concretes Enhanced with Glass Fibers and Metal Chips". Materials (2024): https://doi.org/10.3390/ma17092094.
    10.3390/ma17092094
  10. Daniel S. Correia; Inês D. Costa; Eduardo A. S. Marques; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Development of a Unified Specimen for Adhesive Characterization—Part 2: Experimental Study on the Mode I (mDCB) and II (ELS) Fracture Components". Materials (2024): https://doi.org/10.3390/ma17051049.
    10.3390/ma17051049
  11. Vasco DC Pires; Ricardo JC Carbas; Eduardo AS Marques; Lucas FM da Silva. "Delamination prevention of composite joints with asymmetric carbon-fiber reinforced plastic adherends". Journal of Composite Materials (2024): https://doi.org/10.1177/00219983241231062.
    10.1177/00219983241231062
  12. Pedro Morais; Alireza Akhavan-Safar; Ricardo J. C. Carbas; Eduardo A. S. Marques; Bala Karunamurthy; Lucas F. M. da Silva. "Mode I Fatigue and Fracture Assessment of Polyimide–Epoxy and Silicon–Epoxy Interfaces in Chip-Package Components". Polymers (2024): https://doi.org/10.3390/polym16040463.
    10.3390/polym16040463
  13. C.S.P. Borges; J.D.P. Sousa; E.A.S. Marques; R.J.C. Carbas; D. Chaleix; F. Gilbert; J. Pirart; et al. "Study on the influence of water ingress on the interface of high strength zinc coated steels and epoxy adhesives". International Journal of Adhesion and Adhesives (2024): https://doi.org/10.1016/j.ijadhadh.2023.103595.
    10.1016/j.ijadhadh.2023.103595
  14. António Francisco G. Tenreiro; Ricardo J. C. Carbas; Eduardo A. S. Marques; Carlos M. da Silva; António M. Lopes; Lucas F. M. da Silva. "On the design of unconventional testing machines for engineering testing – the case study of advanced joining processes unit". Journal of Machine Design and Automation Intelligence (2024): https://doi.org/10.1515/jmdai-2023-0002.
    10.1515/jmdai-2023-0002
  15. Beatriz D. Simões; Élio M. D. Fernandes; Eduardo A. S. Marques; Ricardo J. C. Carbas; Steven Maul; Patrick Stihler; Philipp Weißgraeber; Lucas F. M. da Silva. "Development of a Cyclic Creep Testing Station Tailored to Pressure-Sensitive Adhesives". Machines (2024): https://doi.org/10.3390/machines12010076.
    10.3390/machines12010076
  16. Shahin Jalali; Catarina da Silva Pereira Borges; Ricardo João Camilo Carbas; Eduardo André de Sousa Marques; Alireza Akhavan-Safar; Ana Sofia Oliveira Ferreira Barbosa; João Carlos Moura Bordado; Lucas Filipe Martins da Silva. "A Novel Technique for Substrate Toughening in Wood Single Lap Joints Using a Zero-Thickness Bio-Adhesive". Materials (2024): https://doi.org/10.3390/ma17020448.
    10.3390/ma17020448
  17. Vasco D. C. Pires; Francisco C. C. Ribeiro; Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "The reduction of stress concentrations in adhesive joints with the use of curved aluminum adherends". Mechanics of Advanced Materials and Structures (2024): https://doi.org/10.1080/15376494.2023.2299936.
    10.1080/15376494.2023.2299936
  18. Caio Adler; Pedro Morais; Alireza Akhavan-Safar; Ricardo J. C. Carbas; Eduardo A. S. Marques; Bala Karunamurthy; Lucas F. M. da Silva. "Cohesive Properties of Bimaterial Interfaces in Semiconductors: Experimental Study and Numerical Simulation Using an Inverse Cohesive Contact Approach". Materials (2024): https://doi.org/10.3390/ma17020289.
    10.3390/ma17020289
  19. R. Beygi; R.J.C. Carbas; E.A.S. Marques; A.Q. Barbosa; M.M. Kasaei; L.F.M. da Silva. "Mechanism of toughness enhancement of brittle fracture by intermittent ¿-intermetallic in Al/Cu joint made by FSW". Materials Science and Engineering: A (2024): https://doi.org/10.1016/j.msea.2023.145907.
    10.1016/j.msea.2023.145907
  20. João P. J. R. Santos; Daniel S. Correia; Eduardo A. S. Marques; Ricardo J. C. Carbas; Frida Gilbert; Lucas F. M. da Silva. "Extended Finite Element Method (XFEM) Model for the Damage Mechanisms Present in Joints Bonded Using Adhesives Doped with Inorganic Fillers". Materials (2023): https://doi.org/10.3390/ma16237499.
    10.3390/ma16237499
  21. Jamal Bidadi; Hamed Saeidi Googarchin; Alireza Akhavan-Safar; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Characterization of Bending Strength in Similar and Dissimilar Carbon-Fiber-Reinforced Polymer/Aluminum Single-Lap Adhesive Joints". Applied Sciences (2023): https://doi.org/10.3390/app132312879.
    10.3390/app132312879
  22. Vasco C. M. B. Rodrigues; Eduardo A. S. Marques; Ricardo J. C. Carbas; Michael Youngberg; Anne Dussaud; Reza Beygi; Lucas F. M. Da Silva. "Development and Study of a New Silane Based Polyurethane Hybrid Flexible Adhesive—Part 1: Mechanical Characterization". Materials (2023): https://doi.org/10.3390/ma16237299.
    10.3390/ma16237299
  23. Shahin Jalali; Catarina da Silva Pereira Borges; Ricardo João Camilo Carbas; Eduardo André de Sousa Marques; João Carlos Moura Bordado; Lucas Filipe Martins da Silva. "Characterization of Densified Pine Wood and a Zero-Thickness Bio-Based Adhesive for Eco-Friendly Structural Applications". Materials (2023): https://doi.org/10.3390/ma16227147.
    10.3390/ma16227147
  24. Vasco C. M. B. Rodrigues; Eduardo A. S. Marques; Ricardo J. C. Carbas; Michael Youngberg; Anne Dussaud; Reza Beygi; Lucas F. M. da Silva. "The Development and Study of a New Silylated Polyurethane-Based Flexible Adhesive—Part 2: Joint Testing and Numerical Modelling". Materials (2023): https://doi.org/10.3390/ma16217022.
    10.3390/ma16217022
  25. Fernando Castro Sousa; Alireza Akhavan-Safar; Ricardo J.C. Carbas; Eduardo A.S. Marques; Ana Q. Barbosa; Lucas F.M. da Silva. "Experimental study on the influence of environmental conditions on the fatigue behaviour of adhesive joints". International Journal of Fatigue (2023): https://doi.org/10.1016/j.ijfatigue.2023.107752.
    10.1016/j.ijfatigue.2023.107752
  26. Hossein Malekinejad; Ricardo J. C. Carbas; Alireza Akhavan-Safar; Eduardo A. S. Marques; Fernando Castro Sousa; Lucas F. M. da Silva. "Enhancing Fatigue Life and Strength of Adhesively Bonded Composite Joints: A Comprehensive Review". Materials (2023): https://doi.org/10.3390/ma16196468.
    10.3390/ma16196468
  27. Beatriz D. Simões; Eduardo A. S. Marques; Ricardo J. C. Carbas; Steven Maul; P. Stihler; Philipp Weißgraeber; Lucas F. M. da Silva. "Rheological and Mechanical Properties of an Acrylic PSA". Polymers (2023): https://doi.org/10.3390/polym15183843.
    10.3390/polym15183843
  28. Mohammad Mehdi Kasaei; José A. C. Pereira; Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "Ductile Fracture Prediction in Hole Hemming of Aluminum and Magnesium Sheets". Metals (2023): https://doi.org/10.3390/met13091559.
    10.3390/met13091559
  29. A. Francisco G. Tenreiro; António M. Lopes; Lucas F.M. da Silva; Ricardo J.C. Carbas. "Influence of void damage on the electromechanical impedance spectra of Single Lap Joints". NDT & E International (2023): https://doi.org/10.1016/j.ndteint.2023.102865.
    10.1016/j.ndteint.2023.102865
  30. Maria João Calheiros-Lobo; João Mário Calheiros-Lobo; Ricardo Carbas; Lucas F. M. da Silva; Teresa Pinho. "A Polymer-Infiltrated Ceramic as Base Adherent in an Experimental Specimen Model to Test the Shear Bond Strength of CAD-CAM Monolithic Ceramics Used in Resin-Bonded Dental Bridges". Coatings (2023): https://doi.org/10.3390/coatings13071218.
    10.3390/coatings13071218
  31. Maria J. P. Ribas; Alireza Akhavan-Safar; Nicolas Pigray; Ricardo J. C. Carbas; Eduardo A. S. Marques; Catarina S. P. Borges; Sabine Wenig; Lucas F. M. da Silva. "From High Strain Rates to Elevated Temperatures: Investigating Mixed-Mode Fracture Behaviour in a Polyurethane Adhesive". Polymers (2023): https://doi.org/10.3390/polym15122675.
    10.3390/polym15122675
  32. Reza Beygi; Amir Abbas Talkhabi; Majid Zarezadeh Mehrizi; Eduardo A. S. Marques; Ricardo J. C. Carbas; Lucas F. M. da Silva. "A Novel Lap-Butt Joint Design for FSW of Aluminum to Steel in Tee-Configuration: Joining Mechanism, Intermetallic Formation, and Fracture Behavior". Metals (2023): https://doi.org/10.3390/met13061027.
    10.3390/met13061027
  33. Farin Ramezani; Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "Study of Hybrid Composite Joints with Thin-Ply-Reinforced Adherends". Materials (2023): https://doi.org/10.3390/ma16114002.
    10.3390/ma16114002
  34. D. Santos; A. Akhavan-Safar; R.J.C. Carbas; E.A.S. Marques; S. Wenig; L.F.M. da Silva. "Load-control vs. displacement-control strategy in fatigue threshold analysis of adhesives: Effects of temperature". Engineering Fracture Mechanics (2023): https://doi.org/10.1016/j.engfracmech.2023.109255.
    10.1016/j.engfracmech.2023.109255
  35. Kasaei, M. M.; Beygi, R.; Carbas, R. J. C.; Marques, E. A. S.; da Silva, L. F. M.. "A review on mechanical and metallurgical joining by plastic deformation". Discover Mechanical Engineering 2 1 (2023): http://dx.doi.org/10.1007/s44245-023-00012-9.
    10.1007/s44245-023-00012-9
  36. C.S.P. Borges; R. Brandão; A. Akhavan-Safar; E.A.S. Marques; R.J.C. Carbas; C. Ueffing; P. Weißgraeber; F. Schmid; L.F.M. da Silva. "Influence of water and surfactant contamination on the mechanical and chemical properties of a silicone adhesive before and after curing". The Journal of Adhesion (2023): https://doi.org/10.1080/00218464.2022.2082291.
    10.1080/00218464.2022.2082291
  37. Rafael J. F. de Sousa; Pedro N. Gomes; Daniel S. Correia; Ricardo J. C. Carbas; Eduardo A. S. Marques; Paulo J. C. das Neves; Willian P. Afonso; Lucas F. M. da Silva. "Analysis of the Mechanical Performance and Durability of Adhesively Bonded Joints Used in the Milling Tool Industry". Applied Sciences (2023): https://doi.org/10.3390/app13084937.
    10.3390/app13084937
  38. Maria João Calheiros-Lobo; Tatiana Vieira; Ricardo Carbas; Lucas F. M. da Silva; Teresa Pinho. "Effectiveness of Self-Adhesive Resin Luting Cement in CAD-CAM Blocks—A Systematic Review and Meta-Analysis". Materials (2023): https://doi.org/10.3390/ma16082996.
    10.3390/ma16082996
  39. Daniel S. Correia; Inês D. Costa; Beatriz D. Simões; Eduardo A. S. Marques; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Development of a Unified Specimen for Adhesive Characterisation—Part 1: Numerical Study on the Mode I (mDCB) and II (ELS) Fracture Components". Materials (2023): https://doi.org/10.3390/ma16082951.
    10.3390/ma16082951
  40. Beatriz D. Simões; Élio M. D. Fernandes; Eduardo A. S. Marques; Ricardo J. C. Carbas; Steven Maul; Patrick Stihler; Philipp Weißgraeber; Lucas F. M. da Silva. "An Exploratory Study on Determining and Modeling the Creep Behavior of an Acrylic Pressure-Sensitive Adhesive". Materials (2023): https://doi.org/10.3390/ma16052029.
    10.3390/ma16052029
  41. Farin Ramezani; Ricardo J. C. Carbas; Eduardo A. S. Marques; Antonio M. Ferreira; Lucas F. M. da Silva. "A study of the fracture mechanisms of hybrid carbon fiber reinforced polymer laminates reinforced by thin-ply". Polymer Composites (2023): https://doi.org/10.1002/pc.27196.
    10.1002/pc.27196
  42. Mazaher Salamat-Talab; Alireza Akhavan-Safar; Ali Zeinolabedin-Beygi; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Effect of Through-the-Thickness Delamination Position on the R-Curve Behavior of Plain-Woven ENF Specimens". Materials (2023): https://doi.org/10.3390/ma16051811.
    10.3390/ma16051811
  43. Gabriel M. F. Ramalho; António M. Lopes; Ricardo J. C. Carbas; Lucas F. M. Da Silva. "Identifying Weak Adhesion in Single-Lap Joints Using Lamb Wave Data and Artificial Intelligence Algorithms". Applied Sciences (2023): https://doi.org/10.3390/app13042642.
    10.3390/app13042642
  44. Bernardo S. Moreira; Paulo D. P. Nunes; Carlos M. da Silva; António Francisco G. Tenreiro; António M. Lopes; Ricardo J. C. Carbas; Eduardo A. S. Marques; Marco P. L. Parente; Lucas F. M. da Silva. "Numerical Design of a Thread-Optimized Gripping System for Lap Joint Testing in a Split Hopkinson Apparatus". Sensors (2023): https://doi.org/10.3390/s23042273.
    10.3390/s23042273
  45. de Castro Lopes, F. V. B.; Akhavan-Safar, A.; Carbas, R. J. C.; Marque, E. A. S.; Goyal, R.; Jennings, J.; da Silva, L. F. M.. "The role of loading mode on the property degradation of adhesives at high temperatures". Fatigue & Fracture of Engineering Materials & Structures 46 5 (2023): 1848-1863. http://dx.doi.org/10.1111/ffe.13968.
    10.1111/ffe.13968
  46. Catarina S. P. Borges; Eduardo A. S. Marques; Ricardo J. C. Carbas; Alireza Akhavan-Safar; Christoph Ueffing; Philipp Weißgraeber; Lucas F. M. da Silva. "Effect of the Interface/Interphase on the Water Ingress Properties of Joints with PBT-GF30 and Aluminum Substrates Using Silicone Adhesive". Polymers (2023): https://doi.org/10.3390/polym15040788.
    10.3390/polym15040788
  47. F. Ramezani; R. Carbas; E. A. S. Marques; A. M. Ferreira; L. F. M. da Silva. "Study on out-of-plane tensile strength of angle-plied reinforced hybrid CFRP laminates using thin-ply". Mechanics of Advanced Materials and Structures (2023): https://doi.org/10.1080/15376494.2023.2165742.
    10.1080/15376494.2023.2165742
  48. Farin Ramezani; Beatriz D. Simões; Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "Developments in Laminate Modification of Adhesively Bonded Composite Joints". Materials (2023): https://doi.org/10.3390/ma16020568.
    10.3390/ma16020568
  49. Borges, C. S. P.; Akhavan-Safar, A.; Tsokanas, P.; Carbas, R. J. C.; Marques, E. A. S.; da Silva, L. F. M.. "From fundamental concepts to recent developments in the adhesive bonding technology: a general view". Discover Mechanical Engineering (2023):
    Aceite para publicação
  50. Catarina S. P. Borges; Shahin Jalali; Panayiotis Tsokanas; Eduardo A. S. Marques; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Sustainable Development Approaches through Wooden Adhesive Joints Design". Polymers (2022): https://doi.org/10.3390/polym15010089.
    10.3390/polym15010089
  51. Mael Perez; Alireza Akhavan-Safar; Ricardo J. C. Carbas; Eduardo A. S. Marques; Sabine Wenig; Lucas F. M. da Silva. "Loading Rate and Temperature Interaction Effects on the Mode I Fracture Response of a Ductile Polyurethane Adhesive Used in the Automotive Industry". Materials (2022): https://doi.org/10.3390/ma15248948.
    10.3390/ma15248948
  52. Maria João Calheiros-Lobo; Ricardo Carbas; Lucas F.M. da Silva; Teresa Pinho. "Impact of in vitro findings on clinical protocols for the adhesion of CAD-CAM blocks: A systematic integrative review and meta-analysis". The Journal of Prosthetic Dentistry (2022): https://doi.org/10.1016/j.prosdent.2022.08.024.
    10.1016/j.prosdent.2022.08.024
  53. Beatriz D. Simões; Paulo D. P. Nunes; Farin Ramezani; Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "Experimental and Numerical Study of Thermal Residual Stresses on Multimaterial Adherends in Single-Lap Joints". Materials (2022): https://doi.org/10.3390/ma15238541.
    10.3390/ma15238541
  54. Paulo David Pereira Nunes; Eduardo André de Sousa Marques; Alireza Akhavan-Safar; Catarina da Silva Pereira Borges; Ricardo João Camilo Carbas; Lucas Filipe Martins da Silva. "An update on the development of techniques for the determination and modelling of the impact behaviour of adhesives and bonded structures used in the automotive sector". Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering (2022): https://doi.org/10.1177/09544070221135902.
    10.1177/09544070221135902
  55. Simões, B. D.; Nunes, P. D. P.; Henriques, B. S.; Marques, E. A. S.; Carbas, R. J. C.; da Silva, L.F.M. "Determination of Mode I cohesive law of structural adhesives using the direct method". The Journal of Adhesion (2022): 1-28. http://dx.doi.org/10.1080/00218464.2022.2152677.
    Publicado • 10.1080/00218464.2022.2152677
  56. Eduardo Marques; Ricardo Carbas; Lucas DA SILVA. "Characterizing Academic Engineering Research Groups". U.Porto Journal of Engineering (2022): https://doi.org/10.24840/2183-6493_008.006_0006.
    10.24840/2183-6493_008.006_0006
  57. Aida Faria; Daniel Correia; Eduardo Marques; Ricardo Carbas; Lucas Da Silva. "Novel Mechanical Characterization Method Applied to Non-Structural Adhesives: Adherend Material Sensitivity". Journal on Mechanics of Solids (2022): https://doi.org/10.24840/2975-8262_001-001_001799.
    10.24840/2975-8262_001-001_001799
  58. Duarte Granja; Beatriz Simões; Ricardo Carbas; Eduardo Marques; Lucas Da Silva. "Establishment of the Cohesive Law of an Epoxy Adhesive Using the Direct Method and the Effect of the Substrate Material". Journal on Mechanics of Solids (2022): https://doi.org/10.24840/2975-8262_001-001_001836.
    10.24840/2975-8262_001-001_001836
  59. Luis M. R. M. Corte-Real; Shahin Jalali; Catarina S. P. Borges; Eduardo A. S. Marques; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Development and Characterisation of Joints with Novel Densified and Wood/Cork Composite Substrates". Materials (2022): https://doi.org/10.3390/ma15207163.
    10.3390/ma15207163
  60. R Beygi; A Akhavan-Safar; R Carbas; AQ Barbosa; EAS Marques; LFM da Silva. "Utilizing a ductile damage criterion for fracture analysis of a dissimilar aluminum/steel joint made by friction stir welding". Engineering Fracture Mechanics (2022): https://doi.org/10.1016/j.engfracmech.2022.108775.
    10.1016/j.engfracmech.2022.108775
  61. João P. J. R. Santos; Daniel S. Correia; Eduardo A. S. Marques; Ricardo J. C. Carbas; Frida Gilbert; Lucas F. M. da Silva. "Characterization of the Effect of Hollow Glass Beads on the Mechanical Properties of Structural Adhesives". Materials 15 11 (2022): 3817-3817. https://doi.org/10.3390/ma15113817.
    10.3390/ma15113817
  62. Eduardo Marques; Luiz Da Silva; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Recent advances in laser welding for joining polymeric components". Engineering Manufacturing Letters (2022): https://doi.org/10.24840/2795-5168_001-001_0003.
    10.24840/2795-5168_001-001_0003
  63. Ricardo Carbas. "Editorial". Engineering Manufacturing Letters (2022): https://doi.org/10.24840/2795-5168_001-001_0001.
    10.24840/2795-5168_001-001_0001
  64. J. António da Costa; A. Akhavan-Safar; E.A.S. Marques; R.J.C. Carbas; L.F.M. da Silva. "Effects of ageing frequency on the interfacial failure and tensile properties of adhesively bonded Arcan joints exposed to cyclic ageing environments". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2022): 095440892210897-095440892210897. https://doi.org/10.1177/09544089221089703.
    10.1177/09544089221089703
  65. R. Brandão; C. S. P. Borges; E. A. S. Marques; R. J. C. Carbas; A. Akhavan-Safar; P. D. P. Nunes; C. Ueffing; et al. "Effect of surfactant contamination on the properties of aluminum/silicone adhesive joints". Mechanics of Advanced Materials and Structures (2022): https://doi.org/10.1080/15376494.2022.2046217.
    10.1080/15376494.2022.2046217
  66. Antelo, J.; Akhavan-Safar, A.; Carbas, R.J.C.; Marques, E.A.S.; Goyal, R.; da Silva, L.F.M.. "Replacing welding with adhesive bonding: An industrial case study". International Journal of Adhesion and Adhesives 113 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85119380857&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2021.103064
  67. Correia, D.S.; Carbas, R.J.C.; Marques, E.A.S.; das Neves, P.J.C.; da Silva, L.F.M.. "Experimental study on aluminium to tungsten carbide/polycrystalline diamond (WC/PCD) adhesive bonding for milling tools". International Journal of Adhesion and Adhesives 114 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85124872955&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2022.103121
  68. Nunes, P.D.P.; Marques, E.A.S.; Carbas, R.J.C.; Akhavan-Safar, A.; da Silva, L.F.M.. "Quasi-static and intermediate test speed validation of SHPB specimens for the determination of mode I, mode II fracture toughness of structural epoxy adhesives". Engineering Fracture Mechanics 262 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85123715328&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2021.108231
  69. Delzendehrooy, F.; Akhavan-Safar, A.; Barbosa, A.Q.; Beygi, R.; Cardoso, D.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "A comprehensive review on structural joining techniques in the marine industry". Composite Structures 289 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85126948157&partnerID=MN8TOARS.
    10.1016/j.compstruct.2022.115490
  70. Teixeira, P.; Akhavan-Safar, A.; Carbas, R.J.C.; da Silva, L.F.M.. "Influence of the cure state on mechanical properties of an epoxy-based adhesive: Experimental characterization and numerical simulation". Polymers for Advanced Technologies 33 4 (2022): 1163-1170. http://www.scopus.com/inward/record.url?eid=2-s2.0-85121472634&partnerID=MN8TOARS.
    10.1002/pat.5589
  71. Brandão, R.; Borges, C.S.P.; Marques, E.A.S.; Carbas, R.J.C.; Akhavan-Safar, A.; Schmid, F.; Ueffing, C.; Weißgraeber, P.; da Silva, L.F.M.. "The influence of humidity and immersion temperature on the properties and failure mode of PBT-GF30/silicone bonded joints". Composite Structures 289 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85126526481&partnerID=MN8TOARS.
    10.1016/j.compstruct.2022.115421
  72. Dantas, M.A.; Carbas, R.J.C.; Marques, E.A.S.; Kushner, D.; da Silva, L.F.M.. "Study of the permeation to ethylene glycol in flexible tubular adhesive joints". Journal of Testing and Evaluation 50 2 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85121289131&partnerID=MN8TOARS.
    10.1520/JTE20210270
  73. Correia, D.S.; Marques, E.A.S.; Carbas, R.J.C.; das Neves, P.J.C.; da Silva, L.F.M.. "Numerical optimisation of bonded joints for the manufacture of edge milling tools". Engineering Failure Analysis 134 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85122315884&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2021.106012
  74. Boland, A.J.; Lopes, A.M.; Moreira da Silva, C.M.S.; Tenreiro, A.F.G.; da Silva, L.F.M.; Nunes, P.D.P.; Marques, E.A.S.; Carbas, R.J.C.. "Development of a split Hopkinson pressure bar machine for high strain rate testing of bonded joints". Journal of Testing and Evaluation 50 1 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85105712314&partnerID=MN8TOARS.
    10.1520/JTE20200677
  75. Ramezani, F.; Nunes, P.D.P.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "The joint strength of hybrid composite joints reinforced with different laminates materials". Journal of Advanced Joining Processes 5 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85123923499&partnerID=MN8TOARS.
    10.1016/j.jajp.2022.100103
  76. da Costa, J.A.; Akhavan-Safar, A.; Marques, E.A.S.; Carbas, R.J.C.; da Silva, L.F.M.. "The influence of interfacial failure on the tensile S–N response of aged Arcan joints". Journal of Applied Polymer Science 139 16 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85120620709&partnerID=MN8TOARS.
    10.1002/app.51991
  77. Delzendehrooy, F.; Akhavan-Safar, A.; Barbosa, A.Q.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "Investigation of the mechanical performance of hybrid bolted-bonded joints subjected to different ageing conditions: Effect of geometrical parameters and bolt size". Journal of Advanced Joining Processes 5 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85123004733&partnerID=MN8TOARS.
    10.1016/j.jajp.2022.100098
  78. Yongming Yang; Jun Zhao; Shishun Zhang; EAS Marques; RJC Carbas; JJM Machado; LFM da Silva. "Determination of fracture toughness of an adhesive in civil engineering and interfacial damage analysis of carbon fiber reinforced polymer-steel structure bonded joints". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2021): 146442072110213-146442072110213. https://doi.org/10.1177/14644207211021385.
    10.1177/14644207211021385
  79. R. J. C. Carbas; E. A. S. Marques; L. F. M. da Silva. "The influence of epoxy adhesive toughness on the strength of hybrid laminate adhesive joints". Applied Adhesion Science 9 1 (2021): https://doi.org/10.1186/s40563-020-00132-5.
    10.1186/s40563-020-00132-5
  80. Mateus dos Reis; Ricardo Carbas; Eduardo Marques; Lucas da Silva. "Functionally graded adhesive joints under impact loads". Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering (2021): 095440702110045-095440702110045. https://doi.org/10.1177/09544070211004505.
    10.1177/09544070211004505
  81. João Monteiro; Rui Salgado; Tomás Rocha; G. Pereira; Eduardo Marques; Ricardo Carbas; Lucas Da Silva. "Effect of Adhesive Type and Overlap Length on the Mechanical Resistance of a Simple Overlap Adhesive Joint". U.Porto Journal of Engineering (2021): https://doi.org/10.24840/2183-6493_007.003_0001.
    10.24840/2183-6493_007.003_0001
  82. J. A. da Costa; Alireza Akhavan-Safar; E. A. S. Marques; R. J. C. Carbas; L. F. M. da Silva. "Cyclic ageing of adhesive materials". The Journal of Adhesion (2021): https://doi.org/10.1080/00218464.2021.1895772.
    10.1080/00218464.2021.1895772
  83. Ricardo Carbas; Eduardo Marques; Lucas Da Silva. "Advanced Joining Processes Unit". U.Porto Journal of Engineering (2021): https://doi.org/10.24840/2183-6493_007.001_0005.
    10.24840/2183-6493_007.001_0005
  84. Ana Barbosa; Lucas Da Silva; Ana Loureiro; Eduardo Marques; Ricardo Carbas; Sílvio De Barros. "European Adhesive Bonder". U.Porto Journal of Engineering (2021): https://doi.org/10.24840/2183-6493_007.001_0006.
    10.24840/2183-6493_007.001_0006
  85. Mateus Reis; Teresa Duarte; Eduardo Marques; Catarina Borges; Fernando Sousa; Ricardo Carbas; Lucas Da Silva. "The Increase of Brazilian Students in a Portuguese Engineering School". U.Porto Journal of Engineering (2021): https://doi.org/10.24840/2183-6493_007.001_0008.
    10.24840/2183-6493_007.001_0008
  86. JA da Costa; A Akhavan-Safar; EAS Marques; RJC Carbas; LFM da Silva. "Effects of cyclic ageing on the tensile properties and diffusion coefficients of an epoxy-based adhesive". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2021): 146442072199487-146442072199487. https://doi.org/10.1177/1464420721994871.
    10.1177/1464420721994871
  87. Marques, E.A.S.; Carbas, R.J.C.. "Editorial". Journal of Advanced Joining Processes 3 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85120443875&partnerID=MN8TOARS.
    10.1016/j.jajp.2021.100062
  88. Carbas, R.J.C.; Dantas, M.A.; Marques, E.A.S.; da Silva, L.F.M.. "Effect of the adhesive thickness on butt adhesive joints under torsional loads". Journal of Advanced Joining Processes 3 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85112536492&partnerID=MN8TOARS.
    10.1016/j.jajp.2021.100061
  89. Antelo, J.; Akhavan-Safar, A.; Carbas, R.J.C.; Marques, E.A.S.; Goyal, R.; da Silva, L.F.M.. "Fatigue life evaluation of adhesive joints in a real structural component". International Journal of Fatigue 153 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85114124570&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2021.106504
  90. Khabaz-Aghdam, A.; Behjat, B.; Marques, E.A.S.; Carbas, R.J.C.; Silva, L.F.M.D.; Roghani-Mamaqani, H.. "Effect of reduced graphene oxide on mechanical behavior of an epoxy adhesive in glassy and rubbery states". Journal of Composite Materials 55 26 (2021): 3839-3848. http://www.scopus.com/inward/record.url?eid=2-s2.0-85110068945&partnerID=MN8TOARS.
    10.1177/00219983211031659
  91. da Silva, C.I.; Cunha, M.R.O.; Barbosa, A.Q.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "Functionally graded adhesive joints using magnetic microparticles with a polyurethane adhesive". Journal of Advanced Joining Processes 3 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85112525192&partnerID=MN8TOARS.
    10.1016/j.jajp.2021.100048
  92. Frascio, M.; Moroni, F.; Marques, E.; Carbas, R.; Reis, M.; Monti, M.; Avalle, M.; da Silva, L.F.M.. "Feasibility study on hybrid weld-bonded joints using additive manufacturing and conductive thermoplastic filament". Journal of Advanced Joining Processes 3 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85112567105&partnerID=MN8TOARS.
    10.1016/j.jajp.2021.100046
  93. Dantas, M.A.; Carbas, R.J.C.; Marques, E.A.S.; Kushner, D.; da Silva, L.F.M.. "Flexible tubular metal-polymer adhesive joints under torsion loading". International Journal of Adhesion and Adhesives 105 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85098153777&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2020.102787
  94. Tenreiro, A.F.G.; Silva, C.M.; Lopes, A.M.; Nunes, P.D.P.; Carbas, R.J.C.; da Silva, L.F.M.. "Design of a new pneumatic impact actuator of a Split Hopkinson Pressure Bar (SHPB) setup for tensile and compression testing of structural adhesives". Mechanism and Machine Theory 159 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85101356610&partnerID=MN8TOARS.
    10.1016/j.mechmachtheory.2021.104289
  95. Santos, J.P.J.R.; Marques, E.A.S.; Carbas, R.J.C.; Gilbert, F.; da Silva, L.F.M.. "Experimental study of the impact of glass beads on adhesive joint strength and its failure mechanism". Materials 14 22 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85119718706&partnerID=MN8TOARS.
    10.3390/ma14227013
  96. Boutar, Y.; Naïmi, S.; Mezlini, S.; Carbas, R.J.C.; da Silva, L.F.M.; Ben Sik Ali, M.. "Cyclic fatigue testing: Assessment of polyurethane adhesive joints' durability for bus structures' aluminium assembly". Journal of Advanced Joining Processes 3 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85112550768&partnerID=MN8TOARS.
    10.1016/j.jajp.2021.100053
  97. Rosendo, D.; Viana, G.; Carbas, R.; Marques, E.; da Silva, L.F.. "Effect of Temperature and Moisture on the Impact Behaviour of Adhesive Joints for the Automotive Industry". Journal of Applied and Computational Mechanics 7 3 (2021): 1488-1500. http://www.scopus.com/inward/record.url?eid=2-s2.0-85110632697&partnerID=MN8TOARS.
    10.22055/jacm.2021.36089.2793
  98. Beygi, R.; Carbas, R.J.C.; Barbosa, A.Q.; Marques, E.A.S.; da Silva, L.F.M.. "A comprehensive analysis of a pseudo-brittle fracture at the interface of intermetallic of ¿ and steel in aluminum/steel joints made by FSW: Microstructure and fracture behavior". Materials Science and Engineering A 824 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85111238246&partnerID=MN8TOARS.
    10.1016/j.msea.2021.141812
  99. Borges, C.S.P.; Akhavan-Safar, A.; Marques, E.A.S.; Carbas, R.J.C.; Ueffing, C.; Weißgraeber, P.; da Silva, L.F.M.. "Effect of water ingress on the mechanical and chemical properties of polybutylene terephthalate reinforced with glass fibers". Materials 14 5 (2021): 1-24. http://www.scopus.com/inward/record.url?eid=2-s2.0-85102755332&partnerID=MN8TOARS.
    10.3390/ma14051261
  100. Beygi, R.; Carbas, R.; Queiros, A.; Marques, E.A.S.; Shi, R.; da Silva, L.F.M.. "Comparative Study Between Stainless Steel and Carbon Steel During Dissimilar Friction Stir Welding with Aluminum: Kinetics of Al–Fe Intermetallic Growth". Metals and Materials International (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85115879202&partnerID=MN8TOARS.
    10.1007/s12540-021-01070-y
  101. MQ dos Reis; RJC Carbas; EAS Marques; LFM da Silva. "Numerical modelling of functionally graded adherends". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2020): 095440622096769-095440622096769. https://doi.org/10.1177/0954406220967695.
    10.1177/0954406220967695
  102. Alireza Akhavan-Safar; Joao Monteiro; Ricardo Carbas; Eduardo Marques; Rakesh Kumar Goyal; Lucas da Silva. "A modified degradation technique for fatigue life assessment of adhesive materials subjected to cyclic shear loads". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2020): 095440622096768-095440622096768. https://doi.org/10.1177/0954406220967684.
    10.1177/0954406220967684
  103. A Akhavan-Safar; J Monteiro; R Carbas; E Marques; R Goyal; LFM da Silva. "Tensile fatigue life prediction of adhesively bonded structures based on CZM technique and a modified degradation approach". Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 234 13 (2020): 1988-1999. https://doi.org/10.1177/0954410020951675.
    10.1177/0954410020951675
  104. M. A. Dantas; R. Carbas; E. A. S. Marques; M. P. L. Parente; D. Kushner; L. F. M. da Silva. "Numerical study of flexible tubular metal-polymer adhesive joints". The Journal of Adhesion (2020): 1-23. https://doi.org/10.1080/00218464.2020.1822173.
    10.1080/00218464.2020.1822173
  105. PDP Nunes; EAS Marques; RJC Carbas; A Akhavan-Safar; LFM da Silva. "DCB tests at constant strain rate using crash-resistant epoxy adhesives: A numerical and experimental approach". Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering (2020): 095440702095457-095440702095457. https://doi.org/10.1177/0954407020954572.
    10.1177/0954407020954572
  106. Mattia Frascio; Eduardo Marques; Ricardo Carbas; Lucas Filipe Martins da Silva; Margherita Monti; Massimiliano Avalle. "Review of Tailoring Methods for Joints with Additively Manufactured Adherends and Adhesives". Materials (2020): https://www.mdpi.com/1996-1944/13/18/3949.
    10.3390/ma13183949
  107. G Viana; RJC Carbas; M Costa; MD Banea; LFM da Silva. "A new cohesive element to model environmental degradation of adhesive joints in the rail industry". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2020): 095440622094890-095440622094890. https://doi.org/10.1177/0954406220948901.
    10.1177/0954406220948901
  108. CSP Borges; EAS Marques; RJC Carbas; C Ueffing; P Weißgraeber; LFM da Silva. "Review on the effect of moisture and contamination on the interfacial properties of adhesive joints". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2020): 095440622094420-095440622094420. https://doi.org/10.1177/0954406220944208.
    10.1177/0954406220944208
  109. CI da Silva; AQ Barbosa; RJC Carbas; EAS Marques; A Akhavan-Safar; LFM da Silva. "Influence of cork microparticles on the fracture type in single lap joints". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2020): 095440622093672-095440622093672. https://doi.org/10.1177/0954406220936729.
    10.1177/0954406220936729
  110. Nunes, Paulo DP; Borges, Catarina SP; Marques, Eduardo AS; Carbas, Ricardo JC; Akhavan-Safar, Alireza; Antunes, Diogo P; Lopes, António M; da Silva, Lucas FM. "Numerical assessment of strain rate in an adhesive layer throughout double cantilever beam and end notch flexure tests". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2020): 095440892091600. http://dx.doi.org/10.1177/0954408920916007.
    10.1177/0954408920916007
  111. dos Reis, Mateus Q; Carbas, Ricardo JC; Marques, Eduardo AS; da Silva, Lucas FM. "Numerical modelling of multi-material graded joints under shear loading". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2020): 095440892091611. http://dx.doi.org/10.1177/0954408920916112.
    10.1177/0954408920916112
  112. Rocha, A.V.M.; Akhavan-Safar, A.; Carbas, R.; Marques, E.A.S.; Goyal, R.; El-zein, M.; da Silva, L.F.M.. "Numerical analysis of mixed-mode fatigue crack growth of adhesive joints using CZM". Theoretical and Applied Fracture Mechanics 106 (2020): 102493. http://dx.doi.org/10.1016/j.tafmec.2020.102493.
    10.1016/j.tafmec.2020.102493
  113. Morgado, M.A.; Carbas, R.J.C.; Santos, D.G. dos; da Silva, L.F.M.. "Strength of CFRP joints reinforced with adhesive layers". International Journal of Adhesion and Adhesives 97 (2020): 102475. http://dx.doi.org/10.1016/j.ijadhadh.2019.102475.
    10.1016/j.ijadhadh.2019.102475
  114. Reis, JML; Machado, JJM; Marques, EAS; Carbas, RJC; da Silva, Lucas FM. "Displacement rate effect in the fracture toughness of glass fiber reinforced polyurethane". Journal of Composite Materials (2020): 002199832090830. http://dx.doi.org/10.1177/0021998320908300.
    10.1177/0021998320908300
  115. Borges, CSP; Nunes, PDP; Akhavan-Safar, A; Marques, EAS; Carbas, RJC; Alfonso, L; Silva, LFM. "A strain rate dependent cohesive zone element for mode I modeling of the fracture behavior of adhesives". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 234 4 (2020): 610-621. http://dx.doi.org/10.1177/1464420720904026.
    10.1177/1464420720904026
  116. Carbas, Ricardo J.C.; Palmares, Miguel P.; da Silva, Lucas F.M.. "Experimental and FE study of hybrid laminates aluminium carbon-fibre joints with different lay-up configurations". Manufacturing Review 7 (2020): 2. http://dx.doi.org/10.1051/mfreview/2019027.
    10.1051/mfreview/2019027
  117. Shang, X.; Marques, E.A.S.; Carbas, R.J.C.; Barbosa, A.Q.; Jiang, D.; da Silva, L.F.M.; Chen, D.; Ju, S.. "Fracture mechanism of adhesive single-lap joints with composite adherends under quasi-static tension". Composite Structures 251 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85087422097&partnerID=MN8TOARS.
    10.1016/j.compstruct.2020.112639
  118. dos Reis, M.Q.; Marques, E.A.S.; Carbas, R.J.C.; da Silva, L.F.M.. "Functionally graded adherends in adhesive joints: An overview". Journal of Advanced Joining Processes 2 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85103593328&partnerID=MN8TOARS.
    10.1016/j.jajp.2020.100033
  119. Borges, C.S.P.; Nunes, P.D.P.; Akhavan, A.; Marques, E.A.S.; Carbas, R.J.C.; Alfonso, L.; Silva, L.F.M.. "Influence of mode mixity and loading rate on the fracture behaviour of crash resistant adhesives". Theoretical and Applied Fracture Mechanics 107 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85079156151&partnerID=MN8TOARS.
    10.1016/j.tafmec.2020.102508
  120. Rosa, N.; Tavares, S.M.O.; Carbas, R.J.C.; Simoes, R.; Magalhães, F.D.; Marques, A.T.. "Methodology for Bone–Implant Stiffness Evaluation". Experimental Mechanics 60 9 (2020): 1251-1263. http://www.scopus.com/inward/record.url?eid=2-s2.0-85089503850&partnerID=MN8TOARS.
    10.1007/s11340-020-00654-w
  121. Rosa, Natacha; Tavares, Sérgio; Carbas, Ricardo; Simoes, Ricardo; Magalhães, F.; Marques, António. "Methodology for Bone–Implant Stiffness Evaluation". (2020): http://hdl.handle.net/11110/1982.
    10.1007/s11340-020-00654-w
  122. Rosa, Natacha; Tavares, Sérgio; Carbas, Ricardo; Simoes, Ricardo; Magalhães, F.; Marques, António. "Methodology for Bone–Implant Stiffness Evaluation". (2020): http://hdl.handle.net/11110/1982.
    10.1007/s11340-020-00654-w
  123. Morgado, M.A.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "Reinforcement of CFRP single lap joints using metal laminates". Composite Structures 230 (2019): 111492. http://dx.doi.org/10.1016/j.compstruct.2019.111492.
    10.1016/j.compstruct.2019.111492
  124. Rocha, Ana V.M.; Akhavan-Safar, Alireza; Carbas, Ricardo; Marques, Eduardo A.S.; Goyal, Rakesh; El-zein, Mohamad; Silva, Lucas F.M.. "Fatigue crack growth analysis of different adhesive systems: Effects of mode mixity and load level". Fatigue & Fracture of Engineering Materials & Structures 43 2 (2019): 330-341. http://dx.doi.org/10.1111/ffe.13145.
    10.1111/ffe.13145
  125. Rocha, AVM; Akhavan-Safar, A; Carbas, R; Marques, EAS; Goyal, R; El-Zein, M; da Silva, LFM. "Paris law relations for an epoxy-based adhesive". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 234 2 (2019): 291-299. http://dx.doi.org/10.1177/1464420719886469.
    10.1177/1464420719886469
  126. Shang, X.; Marques, E.A.S.; Machado, J.J.M.; Carbas, R.J.C.; Jiang, D.; da Silva, L.F.M.. "Review on techniques to improve the strength of adhesive joints with composite adherends". Composites Part B: Engineering 177 (2019): 107363. http://dx.doi.org/10.1016/j.compositesb.2019.107363.
    10.1016/j.compositesb.2019.107363
  127. Banea, M. D.; Da Silva, L. F. M.; Carbas, R. J. C.; Cavalcanti, D.K.K; De Souza, L.F.G.. "The effect of environment and fatigue loading on the behaviour of TEPs-modified adhesives". The Journal of Adhesion 96 1-4 (2019): 423-436. http://dx.doi.org/10.1080/00218464.2019.1680546.
    10.1080/00218464.2019.1680546
  128. Monteiro, J.; Akhavan-Safar, A.; Carbas, R.; Marques, E.; Goyal, R.; El-zein, M.; da Silva, L.F.M.. "Mode II modeling of adhesive materials degraded by fatigue loading using cohesive zone elements". Theoretical and Applied Fracture Mechanics 103 (2019): 102253. http://dx.doi.org/10.1016/j.tafmec.2019.102253.
    10.1016/j.tafmec.2019.102253
  129. Cavalcanti, D.K.K.; Banea, M.D.; Neto, J.S.S.; Lima, R.A.A.; da Silva, L.F.M.; Carbas, R.J.C.. "Mechanical characterization of intralaminar natural fibre-reinforced hybrid composites". Composites Part B: Engineering 175 (2019): 107149. http://dx.doi.org/10.1016/j.compositesb.2019.107149.
    10.1016/j.compositesb.2019.107149
  130. Monteiro, Joao; Akhavan-Safar, Alireza; Carbas, Ricardo; Marques, Eduardo; Goyal, Rakesh; El-zein, Mohamad; Silva, Lucas F.M.. "Influence of mode mixity and loading conditions on the fatigue crack growth behaviour of an epoxy adhesive". Fatigue & Fracture of Engineering Materials & Structures 43 2 (2019): 308-316. http://dx.doi.org/10.1111/ffe.13125.
    10.1111/ffe.13125
  131. Antunes, Diogo P. C.; Lopes, António M.; Moreira da Silva, Carlos M. S.; da Silva, Lucas F. M.; Nunes, Paulo D. P.; Marques, Eduardo A. S.; Carbas, Ricardo J. C.. "Development of a Drop Weight Machine for Adhesive Joint Testing". Journal of Testing and Evaluation 49 3 (2019): 20190147. http://dx.doi.org/10.1520/jte20190147.
    10.1520/jte20190147
  132. Marques, J.B.; Barbosa, A.Q.; da Silva, C.I.; Carbas, R.J.C.; da Silva, L.F.M.. "An overview of manufacturing functionally graded adhesives – Challenges and prospects". The Journal of Adhesion (2019): 1-35. http://dx.doi.org/10.1080/00218464.2019.1646647.
    10.1080/00218464.2019.1646647
  133. dos Reis, M. Q.; Banea, M. D.; da Silva, L. F. M.; Carbas, R. J. C.. "Mechanical characterization of a modern epoxy adhesive for automotive industry". Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 8 (2019): http://dx.doi.org/10.1007/s40430-019-1844-2.
    10.1007/s40430-019-1844-2
  134. Zugliani, P. A.; Banea, M. D.; Budhe, S.; Carbas, R. J.; da Silva, L. F. M.; Rohem, N. R. F.; de Barros, S.. "Bonded composite repair of metallic pipeline using energy release rate method". Journal of Adhesion Science and Technology 33 19 (2019): 2141-2156. http://dx.doi.org/10.1080/01694243.2019.1632537.
    10.1080/01694243.2019.1632537
  135. Machado, JJM; Hayashi, A; Nunes, PDP; Marques, EAS; Carbas, RJC; Sato, C; da Silva, LFM. "Strain rate dependence of a crash resistant adhesive as a function of temperature for the automotive industry". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 233 11 (2019): 2189-2203. http://dx.doi.org/10.1177/1464420719836914.
    10.1177/1464420719836914
  136. Santos, D.G.D.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "Reinforcement of CFRP joints with fibre metal laminates and additional adhesive layers". Composites Part B: Engineering 165 (2019): 386-396. http://www.scopus.com/inward/record.url?eid=2-s2.0-85060610126&partnerID=MN8TOARS.
    10.1016/j.compositesb.2019.01.096
  137. Filipe A. G. Giesteira; E. A. S. Marques; R. J. C. Carbas; L. F. M. da Silva. "Prediction of Joint Strength and Effect of the Surface Treatment on the Single Overlap Adhesive Joints". U.Porto Journal of Engineering 3 3 (2018): 1-16. https://doi.org/10.24840/2183-6493_003.003_0001.
    10.24840/2183-6493_003.003_0001
  138. Banea, M.D.; Da Silva, L.F.M.; Carbas, R.; Barros, S.D.E.. "Effect of temperature and moisture on the tensile properties of a TEPS-modified adhesive". Materiale Plastice 55 (2018): 478-481. http://www.scopus.com/inward/record.url?eid=2-s2.0-85060643227&partnerID=MN8TOARS.
  139. Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; Barbosa, A.Q.; de Barros, S.; Viana, G.. "Effect of water on the behaviour of adhesives modified with thermally expandable particles". International Journal of Adhesion and Adhesives 84 (2018): 250-256. http://www.scopus.com/inward/record.url?eid=2-s2.0-85045477742&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2018.04.002
  140. Viana, G.; Machado, J.; Carbas, R.; Costa, M.; da Silva, L.F.M.; Vaz, M.; Banea, M.D.. "Strain rate dependence of adhesive joints for the automotive industry at low and high temperatures". Journal of Adhesion Science and Technology 32 19 (2018): 2162-2179. http://www.scopus.com/inward/record.url?eid=2-s2.0-85046020652&partnerID=MN8TOARS.
    10.1080/01694243.2018.1464635
  141. Banea, M.D.; Rosioara, M.; Carbas, R.J.C.; da Silva, L.F.M.. "Multi-material adhesive joints for automotive industry". Composites Part B: Engineering 151 (2018): 71-77. http://www.scopus.com/inward/record.url?eid=2-s2.0-85048559625&partnerID=MN8TOARS.
    10.1016/j.compositesb.2018.06.009
  142. Carbas, R.J.C.; da Silva, L.F.M.; Andrés, L.F.S.. "Effect of carbon black nanoparticles concentration on the mechanical properties of a structural epoxy adhesive". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 232 5 (2018): 403-415. http://www.scopus.com/inward/record.url?eid=2-s2.0-85020618333&partnerID=MN8TOARS.
    10.1177/1464420716629046
  143. Carbas, R.J.C.; Da Silva, L.F.M.; Andrés, L.F.S.. "The Mechanical Response of a Structural Epoxy Adhesive Reinforced with Carbon Black Nanoparticles". Microscopy and Microanalysis (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85055057797&partnerID=MN8TOARS.
    10.1017/S1431927618015106
  144. Bonaldo, J.; Banea, M.D.; Carbas, R.J.C.; Da Silva, L.F.M.; De Barros, S.. "Functionally graded adhesive joints by using thermally expandable particles". Journal of Adhesion (2018): 1-20. http://www.scopus.com/inward/record.url?eid=2-s2.0-85047906910&partnerID=MN8TOARS.
    10.1080/00218464.2018.1456338
  145. Shang, X.; Marques, E.A.S.; Machado, J.J.M.; Carbas, R.J.C.; Jiang, D.; da Silva, L.F.M.. "A strategy to reduce delamination of adhesive joints with composite substrates". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85059669496&partnerID=MN8TOARS.
    10.1177/1464420718805712
  146. Boutar, Y.; Naïmi, S.; Mezlini, S.; Carbas, R.J.C.; da Silva, L.F.M.; Ben Sik Ali, M.. "Fatigue resistance of an aluminium one-component polyurethane adhesive joint for the automotive industry: Effect of surface roughness and adhesive thickness". International Journal of Adhesion and Adhesives 83 (2018): 143-152. http://www.scopus.com/inward/record.url?eid=2-s2.0-85043230156&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2018.02.012
  147. Nakada, S.; Furusawa, T.; Yokoi, E.; Carbas, R.; Costa, M.; Marques, E.; Viana, G.; da Silva, L.F.M.. "Influence of Ductility Ingredients of Structural Adhesives on Fracture Energy under Static Mixed-Mode Loading". SAE Technical Papers 2017-March March (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85018454167&partnerID=MN8TOARS.
    10.4271/2017-01-0473
  148. Costa, M.; Carbas, R.; Marques, E.; Viana, G.; da Silva, L.F.M.. "An apparatus for mixed-mode fracture characterization of adhesive joints". Theoretical and Applied Fracture Mechanics 91 (2017): 94-102. http://www.scopus.com/inward/record.url?eid=2-s2.0-85018351296&partnerID=MN8TOARS.
    10.1016/j.tafmec.2017.04.014
  149. Banea, M.D.; da Silva, L.F.M.; Carbas, R.; Campilho, R.D.S.G.. "Effect of material on the mechanical behaviour of adhesive joints for the automotive industry". Journal of Adhesion Science and Technology 31 6 (2017): 663-676. http://www.scopus.com/inward/record.url?eid=2-s2.0-84986203538&partnerID=MN8TOARS.
    10.1080/01694243.2016.1229842
  150. Carbas, R.J.C.; da Silva, L.F.M.; Andrés, L.F.S.. "Functionally graded adhesive joints by graded mixing of nanoparticles". International Journal of Adhesion and Adhesives 76 (2017): 30-37. http://www.scopus.com/inward/record.url?eid=2-s2.0-85012256416&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2017.02.004
  151. Domingues, N.R.E.; Trojan, J.C.; Campilho, R.D.S.G.; Carbas, R.J.C.; Banea, M.D.; da Silva, L.F.M.. "Strength and failure modes of single-L adhesive joints between aluminium and composites". Ciencia e Tecnologia dos Materiais 29 1 (2017): e114-e118. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021952151&partnerID=MN8TOARS.
    10.1016/j.ctmat.2016.04.009
  152. Marques, E.A.S.; Carbas, R.J.C.; Silva, F.; da Silva, L.F.M.; de Paiva, D.P.S.; Magalhães, F.D.. "Use of master curves based on time-temperature superposition to predict creep failure of aluminium-glass adhesive joints". International Journal of Adhesion and Adhesives 74 (2017): 144-154. http://www.scopus.com/inward/record.url?eid=2-s2.0-85010333263&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2016.12.007
  153. Fernandes, P.; Viana, G.; Carbas, R.J.C.; Costa, M.; da Silva, L.F.M.; Banea, M.D.. "The influence of water on the fracture envelope of an adhesive joint". Theoretical and Applied Fracture Mechanics 89 (2017): 1-15. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009788288&partnerID=MN8TOARS.
    10.1016/j.tafmec.2017.01.001
  154. Costa, M.; Carbas, R.; Benedita, M.; Marques, E.; Viana, G.; da Silva, L.F.M.; Yokoi, E.; Nakada, S.; Furusawa, T.. "Static assessment of the mixed-mode behaviour of three epoxy adhesives". Engineering Fracture Mechanics 182 (2017): 552-565. http://www.scopus.com/inward/record.url?eid=2-s2.0-85019630920&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2017.05.028
  155. Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; de Barros, S.. "Debonding on command of multi-material adhesive joints". Journal of Adhesion 93 10 (2017): 756-770. http://www.scopus.com/inward/record.url?eid=2-s2.0-84982286101&partnerID=MN8TOARS.
    10.1080/00218464.2016.1199963
  156. Domingues, N.R.E.; Campilho, R.D.S.G.; Carbas, R.J.C.; Da Silva, L.F.M.. "Experimental and numerical failure analysis of aluminium/composite single-L joints". International Journal of Adhesion and Adhesives 64 (2016): 86-96. http://www.scopus.com/inward/record.url?eid=2-s2.0-84945588451&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2015.10.011
  157. Avendaño, R.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.; Fernandes, A.A.. "Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive". Composite Structures 152 (2016): 34-44. http://www.scopus.com/inward/record.url?eid=2-s2.0-84968735412&partnerID=MN8TOARS.
    10.1016/j.compstruct.2016.05.034
  158. Ribeiro, F.M.F.; Campilho, R.D.S.G.; Carbas, R.J.C.; da Silva, L.F.M.. "Strength and damage growth in composite bonded joints with defects". Composites Part B: Engineering 100 (2016): 91-100. http://www.scopus.com/inward/record.url?eid=2-s2.0-84975871923&partnerID=MN8TOARS.
    10.1016/j.compositesb.2016.06.060
  159. Avendanõ, R.; Carbas, R.J.C.; Chaves, F.J.P.; Costa, M.; Da Silva, L.F.M.; Fernandes, A.A.. "Impact Loading of Single Lap Joints of Dissimilar Lightweight Adherends Bonded with a Crash-Resistant Epoxy Adhesive". Journal of Engineering Materials and Technology, Transactions of the ASME 138 4 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84981539668&partnerID=MN8TOARS.
    10.1115/1.4034204
  160. Marques, E.A.S.; Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Sato, C.. "Effect of low temperature on tensile strength and mode i fracture energy of a room temperature vulcanizing silicone adhesive". Journal of Testing and Evaluation 44 3 (2016): 1284-1293. http://www.scopus.com/inward/record.url?eid=2-s2.0-84984578001&partnerID=MN8TOARS.
    10.1520/JTE20140208
  161. Carbas, R.J.C.; Da Silva, L.F.M.; Andrés, L.F.S.. "Effect of Carbon Black Nanoparticles Concentration on Mechanical Properties of an Epoxy Adhesive Cured by Dielectric Heating". Microscopy and Microanalysis 21 (2015): 15-16. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944060138&partnerID=MN8TOARS.
    10.1017/S1431927615013884
  162. Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.. "Debonding on command of adhesive joints for the automotive industry". International Journal of Adhesion and Adhesives 59 (2015): 14-20. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922831549&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2015.01.014
  163. Carbas, R.J.C.; Da Silva, L.F.M.; Critchlow, G.W.. "Effect of post-cure on adhesively bonded functionally graded joints by induction heating". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 229 5 (2015): 419-430. http://www.scopus.com/inward/record.url?eid=2-s2.0-84940951290&partnerID=MN8TOARS.
    10.1177/1464420714523579
  164. Carbas, R.J.C.; Viana, G.M.S.O.; Da Silva, L.F.M.; Critchlow, G.W.. "Functionally graded adhesive patch repairs of wood beams in civil applications". Journal of Composites for Construction 19 2 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84925068182&partnerID=MN8TOARS.
    10.1061/(ASCE)CC.1943-5614.0000500
  165. Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Structural adhesives modified with thermally expandable particles". Journal of Adhesion 91 10-11 (2015): 823-840. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922825124&partnerID=MN8TOARS.
    10.1080/00218464.2014.985785
  166. Banea, Mariana D.; Silva, Lucas da; Carbas, Ricardo J.C.; Campilho, Raul. "Structural adhesives modified with thermally expandable particles". (2015): http://hdl.handle.net/10400.22/7394.
    10.1080/00218464.2014.985785
  167. Banea, Mariana D.; Silva, Lucas da; Carbas, Ricardo J.C.; Campilho, Raul. "Structural adhesives modified with thermally expandable particles". (2015): http://hdl.handle.net/10400.22/7394.
    10.1080/00218464.2014.985785
  168. Banea, M.D.; Silva, L.F.M.D.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Debonding of adhesively bonded joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 25 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84921290337&partnerID=MN8TOARS.
  169. Carbas, R.J.C.; Da Silva, L.F.M.; Madureira, M.L.; Critchlow, G.W.. "Modelling of functionally graded adhesive joints". Journal of Adhesion 90 8 (2014): 698-716. http://www.scopus.com/inward/record.url?eid=2-s2.0-84897563402&partnerID=MN8TOARS.
    10.1080/00218464.2013.834255
  170. Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Mechanical and thermal characterization of a structural polyurethane adhesive modified with thermally expandable particles". International Journal of Adhesion and Adhesives 54 (2014): 191-199. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903983437&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2014.06.008
  171. Carbas, R.J.C.; Da Silva, L.F.M.; Critchlow, G.W.. "Adhesively bonded functionally graded joints by induction heating". International Journal of Adhesion and Adhesives 48 (2014): 110-118. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886259699&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2013.09.045
  172. Marques, E.A.S.; Da Silva, L.F.M.; Banea, M.D.; Carbas, R.J.C.. "Adhesive joints for low- and high-temperature use: An overview". Journal of Adhesion 91 7 (2014): 556-585. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919489787&partnerID=MN8TOARS.
    10.1080/00218464.2014.943395
  173. Carbas, R.J.C.; Marques, E.A.S.; Da Silva, L.F.M.; Lopes, A.M.. "Effect of cure temperature on the glass transition temperature and mechanical properties of epoxy adhesives". Journal of Adhesion 90 1 (2014): 104-119. http://www.scopus.com/inward/record.url?eid=2-s2.0-84885355715&partnerID=MN8TOARS.
    10.1080/00218464.2013.779559
  174. Carbas, Ricardo. "Efeito da temperatura de cura na temperatura de transição vítrea de adesivos epóxidos". Mecânica Experimental 23 (2014): 9-18.
    Publicado
  175. Banea, Mariana D.; Silva, Lucas F. M. da; Carbas, Ricardo J.C.; Campilho, Raul. "Smart Adhesive Joints: An overview of recent developments". (2014): http://hdl.handle.net/10400.22/5288.
    10.1080/00218464.2013.785916
  176. Banea, Mariana D.; Silva, Lucas F. M. da; Carbas, Ricardo J.C.; Campilho, Raul. "Smart Adhesive Joints: An overview of recent developments". (2014): http://hdl.handle.net/10400.22/5288.
    10.1080/00218464.2013.785916
  177. Banea, Mariana D.; Silva, Lucas F. M. da; Carbas, Ricardo J.C.; Campilho, Raul. "Mechanical and thermal characterization of a structural polyurethane adhesive modified with thermally expandable particles". (2014): http://hdl.handle.net/10400.22/5276.
    10.1016/j.ijadhadh.2014.06.008
  178. Banea, Mariana D.; Silva, Lucas F. M. da; Carbas, Ricardo J.C.; Campilho, Raul. "Mechanical and thermal characterization of a structural polyurethane adhesive modified with thermally expandable particles". (2014): http://hdl.handle.net/10400.22/5276.
    10.1016/j.ijadhadh.2014.06.008
  179. Banea, Mariana D.; Silva, Lucas F. M. da; Carbas, Ricardo J.C.; Campilho, Raul. "Smart Adhesive Joints: An overview of recent developments". (2014): http://hdl.handle.net/10400.22/5288.
    10.1080/00218464.2013.785916
  180. Saldanha, D.F.S.; Canto, C.; Da Silva, L.F.M.; Carbas, R.J.C.; Chaves, F.J.P.; Nomura, K.; Ueda, T.. "Mechanical characterization of a high elongation and high toughness epoxy adhesive". International Journal of Adhesion and Adhesives 47 (2013): 91-98. http://www.scopus.com/inward/record.url?eid=2-s2.0-84888288711&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2013.08.001
  181. Carbas, R.J.C.; Da Silva, L.F.M.; Marques, E.A.S.; Lopes, A.M.. "Effect of post-cure on the glass transition temperature and mechanical properties of epoxy adhesives". Journal of Adhesion Science and Technology 27 23 (2013): 2542-2557. http://www.scopus.com/inward/record.url?eid=2-s2.0-84885359243&partnerID=MN8TOARS.
    10.1080/01694243.2013.790294
  182. da Silva, L.F.M.; Carbas, R.J.C.; Critchlow, G.W.; Figueiredo, M.A.V.; Brown, K.. "Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints". International Journal of Adhesion and Adhesives 29 6 (2009): 621-632. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349185073&partnerID=MN8TOARS.
    10.1016/j.ijadhadh.2009.02.012
Capítulo de livro
  1. Farin Ramezani; João C. M. Salazar; Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "Investigation of Adherend Thickness in Thin-Ply Hybrid Laminates". 2024.
    10.1007/978-3-031-48363-9_6
  2. Eduardo A. S. Marques; Ricardo J. C. Carbas; Marcelo Costa; Lucas F. M. da Silva. "Joint Designer: A Tool for Learning and Doing". 2023.
    10.1007/978-3-031-25401-7_8
  3. Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "The Importance of Laboratorial Classes Dedicated to Advanced Joining Processes in Undergraduate Engineering Education". 2023.
    10.1007/978-3-031-25401-7_9
  4. A. Q. Barbosa; E. A. S. Marques; R. J. C. Carbas; L. F. M. da Silva. "Teaching Adhesive Bonding in Mechanical Engineering Courses". 2023.
    10.1007/978-3-031-25401-7_7
  5. Akhavan-Safar, A.; Marques, E.A.S.; Carbas, R.J.C.; da Silva, L.F.M.. "Fatigue Degradation Models". 43-66. 2022.
    10.1007/978-3-030-93142-1_3
  6. Akhavan-Safar, A.; Marques, E.A.S.; Carbas, R.J.C.; da Silva, L.F.M.. "Introduction". 1-17. 2022.
    10.1007/978-3-030-93142-1_1
  7. Akhavan-Safar, A.; Marques, E.A.S.; Carbas, R.J.C.; da Silva, L.F.M.. "Numerical Simulation". 67-88. 2022.
    10.1007/978-3-030-93142-1_4
  8. Akhavan-Safar, A.; Marques, E.A.S.; Carbas, R.J.C.; da Silva, L.F.M.. "Cohesive Zone Modelling-CZM". 19-42. 2022.
    10.1007/978-3-030-93142-1_2
  9. Akhavan-Safar, A.; Marques, E.A.S.; Carbas, R.J.C.; da Silva, L.F.M.. "Summary and Conclusions". 89-93. 2022.
    10.1007/978-3-030-93142-1_5
  10. Carbas, R. J. C.. "Techniques for the mechanical characterization and numerical modelling of bonded automotive structures under impact loads". In Industrial Applications of Adhesives, editado por Lucas Filipe Martins da Silva, 79-106. Springer, 2021.
    Publicado
  11. Carbas, R. J. C.. "Novel torsion machine to test adhesive joints". In Industrial Applications of Adhesives, editado por Lucas Filipe Martins da Silva, 31-56. Springer, 2021.
  12. Carbas, R. J. C.. "Manufacture and testing". In Advanced Joining Processes: Welding, Plastic Deformation, and Adhesion, editado por Lucas Filipe Martins da Silva. Elsevier, 2021.
  13. Carbas, R. J. C.. "Simulation". In Advanced Joining Processes: Welding, Plastic Deformation, and Adhesion, editado por Lucas Filipe Martins da Silva. Elsevier, 2021.
    Publicado
  14. Carbas, R. J. C.. "Environmental aspect and recycling issues on adhesion". In Adhesive Bonding; Science Technology and Applications, editado por Lucas Filipe Martins da Silva. Woodhead, 2021.
  15. Carbas, R. J. C.. "Stress analysis of adhesive joints". In Adhesive Bonding; Science Technology and Applications, editado por Lucas Filipe Martins da Silva. Woodhead, 2021.
    Publicado
  16. Carbas, R. J. C.. "Mechanical characterization of multi-material 3D printed specimens". In Materials design and application III, editado por Lucas Filipe Martins da Silva. Springer, 2021.
    Publicado
  17. Carbas, R. J. C.. "Joining of polymer matrix composites (PMCs) - adhesive bonding". In Encyclopedia of Materials: Composites, editado por Lucas Filipe Martins da Silva, 309-323. 2021.
    Publicado
  18. Carbas, R. J. C.. "Adhesively bonded polymer composite joints". In Encyclopedia of Materials: Plastics and Polymers, editado por Lucas Filipe Martins da Silva. Elsevier, 2021.
    Publicado
  19. Carbas, R. J. C.. "The behaviour of CFRP adhesive joints under different loading rates". In 6th International Conference on Adhesive Bonding 2021, editado por Lucas Filipe Martins da Silva, 127-142. Springer, 2021.
    Publicado
  20. Galante, J.; Ramalho, G.M.F.; dos Reis, M.Q.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "Mechanical Characterization of 3D Printed Specimens". 149-165. 2021.
    10.1007/978-3-030-68277-4_11
  21. da Silva, Catarina I.; Barbosa, Ana Q.; Marques, José B.; Carbas, Ricardo J. C.; Marques, Eduardo A. S.; Abenojar, Juana; da Silva, Lucas F. M.. "Mechanical Characterisation of Graded Single Lap Joints Using Magnetised Cork Microparticles". In Advanced Structured Materials, 153-174. Springer Singapore, 2020.
    10.1007/978-981-15-2957-3_11
  22. Carbas, Ricardo. "Techniques for the mechanical characterization and numerical modelling of bonded automotive structures under impact loads". In Applications of Adhesive Bonding. 2020.
  23. Carbas, Ricardo. "Novel torsion machine to test adhesive joints". In Applications of Adhesive Bonding. 2020.
  24. de Sousa Marques, E.A.; Akhavan-Safar, A.; Campilho, R.D.S.G.; Carbas, R.J.C.; da Silva, L.F.M.. "Advanced numerical models for predicting the load and environmentally dependent behaviour of adhesives and adhesively bonded joints". 211-244. 2019.
    10.1007/978-3-030-30355-6_10
  25. da Silva, L.F.M.; Carbas, R.J.C.; Banea, M.D.. "Failure strength tests". In Handbook of Adhesion Technology, 489-521. Springer International Publishing, 2018.
    Publicado
  26. Carbas, Ricardo. "Joining and adhesion techniques". In Advances in Manufacturing and Processing of Materials and Structures. CRC Press, 2018.
    Publicado
  27. Carbas, Ricardo. "Adhesion bonding techniques". In Advances in manufacturing and processing of materials and structures. Florida, Estados Unidos: CRC Press, 2018.
    Publicado
Livro
  1. Mohammad Mehdi Kasaei; Beygi, Reza; Marques, EAS; Carbas, Ricardo; da Silva, Lucas F. M.. Mechanical Joining by Plastic Deformation. Países Baixos: Elsevier. 2024.
    Aceite para publicação
  2. Mohammad Mehdi Kasaei; Beygi, Reza; Marques, EAS; Carbas, Ricardo; da Silva, Lucas F. M.. Mechanical Joining by Material Flow. Países Baixos: Elsevier. 2024.
    Aceite para publicação
  3. Lucas Filipe Martins da Silva; Barbosa, Ana; Carbas, Ricardo; Eduardo André Sousa Marques; Akhavan-Safar, Alireza. Adhesive Bonding Technology and Testing. Wiley. 2023.
    Publicado
  4. Boutar, Y.; Naïmi, S.; Mezlini, S.; Carbas, R.J.C.; Da Silva, L.F.M.; Ben Sik Ali, M.. Investigation of Bonded Aluminium Fatigue Behaviour Using a Ductile Adhesive Employed in Bus Structures. 2022.
    10.1007/978-3-030-86446-0_51
  5. de Sousa Marques, Eduardo André; Carbas, R. J. C.; A. Akhavan-Safar; António Francisco Tenreiro; da Silva, Lucas F. M.. Structural adhesive bonding in aerospace applications. 2022.
    Publicado
  6. de Sousa Marques, Eduardo André; Carbas, R. J. C.; Borges, Catarina; da Silva, Lucas F. M.. Problemas e trabalhos em cie^ncia e engenharia dos materiais. 2022.
    Aceite para publicação
  7. Alireza Akhavan-Safar; Eduardo A. S. Marques; Carbas, Ricardo; da Silva, Lucas F. M.. Cohesive Zone Modelling for Fatigue Life Analysis of Adhesive Joints. Springer International Publishing. 2022.
    Publicado
  8. Carbas, R. J. C.. Introduction to Adhesive Bonding. Wiley-VCH. 2021.
    Publicado
  9. Carbas, R. J. C.. Introdução às ligações adesivas estruturais. ENGEBOOK. 2021.
  10. Dantas, M.A.; Carbas, R.J.C.; Lopes, A.M.; da Silva, C.M.; Marques, E.A.S.; da Silva, L.F.M.. Novel torsion machine to test adhesive joints. 2021.
    10.1007/978-981-15-6767-4_3
  11. Marques, E.A.S.; Nunes, P.D.P.; Akhavan-Safar, A.; Borges, C.S.P.; Carbas, R.J.C.; Machado, J.J.M.; Parente, M.P.L.; da Silva, L.F.M.. Techniques for the mechanical characterization and numerical modelling of bonded automotive structures under impact loads. 2021.
    10.1007/978-981-15-6767-4_5
  12. García De Enterría, Eduardo. Problemas e trabalhos práticos de juntas adesivas estruturais. Porto, Portugal: Publindústria. 2017.
    10.12795/9788447221028
Poster em conferência
  1. Correia, DS; Costa, ID; Marques, Eduardo; Carbas, R. J. C.; da Silva, Lucas F. M.. "Direct generation of cohesive zone laws of adhesives". Trabalho apresentado em 1ST INTERNATIONAL CONFERENCE ON MECHANICS OF SOLIDS, 2022.
  2. Borges, CSP; Brandão, R; A. Akhavan-Safar; Marques, Eduardo; Carbas, Ricardo; Ueffing, C; Weißgraeber, P; da Silva, LFM. "Influence of surfactant contamination on the mechanical properties of a silicone adhesive and an adhesive joint with aluminum substrates". Trabalho apresentado em 2nd International Conference on Industrial Applications of Adhesives 2022 (IAA 2022), 2022.
  3. Correia, DS; Marques, Eduardo; Carbas, R. J. C.; das Neves, P.J.C.; da Silva, Lucas F. M.. "Practical implementation and validation of a novel process for manufacturing milling tools using adhesive bonding". Trabalho apresentado em 2nd International Conference on Advanced Joining Processes - AJP2021, 2021.
  4. Borges, CSP; Brandão, R; A. Akhavan-Safar; Marques, Eduardo; Carbas, Ricardo; Ueffing, C; Weißgraeber, P; da Silva, LFM. "Effect of contamination on the mechanical properties of aluminum-silicone adhesive joints". Trabalho apresentado em 6th International Conference on Structural Adhesive Bonding 2021 (AB2021), 2021.
  5. Borges, CSP; A. Akhavan-Safar; Marques, Eduardo; Carbas, R. J. C.; Ueffing, C; Weißgraeber, P; da Silva, LFM. "Effect of moisture ageing on the interfacial strength of adhesive joints: An overview". Trabalho apresentado em 3rd International Conference on Materials Design and Applications 2020 (MDA 2020), 2020.
  6. Borges, CSP; Marques, Eduardo; Carbas, Ricardo; Ueffing, C; Weißgraeber, P; da Silva, LFM. "Effect of moisture and contamination on the interfacial properties of adhesive joints: A review.". Trabalho apresentado em 1st International Conference on Industrial Applications of Adhesives 2020 (IAA 2020), 2020.
  7. Borges, CSP; Nunes, Paulo DP; Akhavan-Safar, Alireza; Marques, Eduardo; Carbas, Ricardo; Alfonso, L; da Silva, LFM. "Fracture envelope of automotive adhesives under impact". Trabalho apresentado em 5th International Conference on Structural Adhesive Bonding (AB 2019), 2019.
  8. Lígia Lopes-Rocha; Pinho, Teresa; da Silva, Lucas F. M.; Carbas, Ricardo. "Effect of curing mode technique on yielding strength and strain of the dental composite resin". Trabalho apresentado em 4th International Conference on Structural Adhesive Bonding (FEUP), 2017.
  9. Carbas, Ricardo; Palmares, M.P.; da Silva, L.F.M.. "Adhesive Joints with Hybrid Laminates Aluminium-CFRP". Trabalho apresentado em MDA2016 - 1st International Conference on Materials Design and Applications, 2016.
  10. Carbas, Ricardo; da Silva, L.F.M.; Andrés, L.F.S.. "Strength of Adhesive Joints with Fibre Metal Laminates with Different Lay-up Configurations". Trabalho apresentado em CLBA2016 - 3ª Conferência Luso-Brasileira de Adesão e Adesivos, 2016.
  11. Carbas, Ricardo; da Silva, L.F.M.; Dumbrava, C.; Guimarães, A.. "Optimization of CFRP Joints with Fibre Metal Laminates". Trabalho apresentado em AB2015 - 3nd International Conference on Structural Adhesive Bonding, 2015.
  12. Carbas, Ricardo; da Silva, L.F.M.; Andrés, L.F.S.. "Functionally Graded Adhesive Joints by Graded Mixing of Nanoparticles". Trabalho apresentado em AB2015 - 3nd International Conference on Structural Adhesive Bonding, 2015.
  13. Carbas, Ricardo; da Silva, L.F.M.; Andrés, L.F.S.. "Effect of Carbon Black Nanoparticles Concentration on Mechanical Properties of an Epoxy Adhesive Cured by Dielectric Heating". Trabalho apresentado em XLVIII Congress of the Portuguese Microscopy Society, INCOMAM’14, 2014.
  14. Carbas, Ricardo; da Silva, L.F.M.; Critchlow, G.W.. "Functionally Graded Adhesive Patch Repairs in Civil Applications". Trabalho apresentado em 37th Annual Meeting of The Adhesion Society, 2014.
  15. Carbas, Ricardo; da Silva, L.F.M.; Marques, E.A.S.. "Analytical and numerical analysis of functionally graded joints". Trabalho apresentado em Adhesion ’13: the 12th International Conference on the Science and Technology of Adhesion and Adhesives, 2013.
  16. Carbas, Ricardo; da Silva, L.F.M.; Critchlow, G.W.. "Effect of post-cure on adhesively bonded functionally graded joints by induction heating". Trabalho apresentado em AB2013 - 2nd International Conference on Structural Adhesive Bonding, 2013.
  17. Viana, G.M.S.O.; Carbas, Ricardo; da Silva, L.F.M.; Critchlow, G.W.. "Functionally graded adhesive patch repairs in civil applications". Trabalho apresentado em AB2013 - 2nd International Conference on Structural Adhesive Bonding, 2013.
  18. Saldanha, D.F.S.; da Silva, L.F.M.; Carbas, Ricardo; Chaves, F.J.P.; Nomura, K.. "Mechanical Characterization of a novel epoxy adhesive". Trabalho apresentado em CLBA2012 - Conferência Luso-Brasileira de Adesão e Adesivos, 2012.
  19. Carbas, Ricardo; Marques, E.A.S.; da Silva, L.F.M.; Lopes, A.M.. "Effect of Cure Temperature on the Glass Transition Temperature and Mechanical Properties of Epoxy Adhesives". Trabalho apresentado em CLBA2012 - Conferência Luso-Brasileira de Adesão e Adesivos, 2012.
  20. Carbas, Ricardo; da Silva, L.F.M.; Barbosa, A.Q.. "Influence of Graded Cure on the Strengh of Adhesive Joints". Trabalho apresentado em AB2011 - 1st International Conference on Structural Adhesive Bonding, 2011.
Resumo em conferência
  1. Barbosa, A. Q.; Tsokanas, P.; Delzendehrooy, F.; Pereira, R.; Carbas, R. J. C.; Marques, E. A. S.; da Silva, L. F. M.. "Benchmarking mechanical assessment of adhesive bonding and hybrid structural joining techniques implemented in maritime industries". Trabalho apresentado em 7th International Conference on Structural Adhesive Bonding, Porto, 2023.
    Aceite para publicação
  2. Couto, A. M. S.; Borges, C. S. P.; Tsokanas, P.; Jalali, S.; Marques, E. A. S.; Carbas, R. J. C.; da Silva, L. F. M.. "Experimental and numerical study on eco-friendly adhesive joints for the automotive industry". Trabalho apresentado em 7th International Conference on Structural Adhesive Bonding, Porto, 2023.
    Aceite para publicação
  3. Couto, A. M. S.; Borges, C. S. P.; Tsokanas, P.; Jalali, S.; Marques, E. A. S.; Carbas, R. J. C.; da Silva, L. F. M.. "A tool for designing eco-friendly adhesively bonded structures for vehicles". Trabalho apresentado em 7th International Conference on Structural Adhesive Bonding, Porto, 2023.
    Aceite para publicação
  4. Tsokanas, P.; Jalali, S.; Borges, C. S. P.; Carbas, R. J. C.; Marques, E. A. S.; da Silva, L. F. M.. "On the mechanical behavior of L- and T-shaped wooden bio-adhesive joints". Trabalho apresentado em 7th International Conference on Structural Adhesive Bonding, Porto, 2023.
    Aceite para publicação
  5. Kasaei, M. M.; Carbas, R. J. C.; E.A.S. Marques; da Silva, L.F.M.. Autor correspondente: Kasaei, M. M.. "Hole hemming for joining metal and polymer sheets". Trabalho apresentado em 3rd International Conference on Advanced Joining Processes, Braga, 2023.
  6. Kasaei, M.M.; Marques, Eduardo; Carbas, Ricardo; da Silva, Lucas F. M.. Autor correspondente: Kasaei, M.M.. "Joining of polymer and metal sheets by hole clinching". Trabalho apresentado em 1st International Conference on Engineering Manufacture, Porto, 2022.
Tese / Dissertação
  1. Guimarães, André Martins. "Novo conceito de juntas adesivas utilizando laminados de fibras e metal". Mestrado, 2016. http://hdl.handle.net/10400.19/3319.
  2. Guimarães, André Martins. "Novo conceito de juntas adesivas utilizando laminados de fibras e metal". Mestrado, 2016. http://hdl.handle.net/10400.19/3319.
  3. Guimarães, André Martins. "Novo conceito de juntas adesivas utilizando laminados de fibras e metal". Mestrado, 2016. http://hdl.handle.net/10400.19/3319.
  4. Domingues, Nuno Ricardo Esteves. "Estudo da resistência de juntas adesivas em L entre alumínio e material compósito". Mestrado, 2015. http://hdl.handle.net/10400.22/7167.
  5. Ribeiro, Filipe Manuel Ferreira. "Estudo da resistência e mecanismos de dano em juntas adesivas entre materiais compósitos com defeitos de adesão". Mestrado, 2015. http://hdl.handle.net/10400.22/8150.
  6. Domingues, Nuno Ricardo Esteves. "Estudo da resistência de juntas adesivas em L entre alumínio e material compósito". Mestrado, 2015. http://hdl.handle.net/10400.22/7167.
  7. Ribeiro, Filipe Manuel Ferreira. "Estudo da resistência e mecanismos de dano em juntas adesivas entre materiais compósitos com defeitos de adesão". Mestrado, 2015. http://hdl.handle.net/10400.22/8150.
  8. Ribeiro, Filipe Manuel Ferreira. "Estudo da resistência e mecanismos de dano em juntas adesivas entre materiais compósitos com defeitos de adesão". Mestrado, 2015. http://hdl.handle.net/10400.22/8150.
  9. Domingues, Nuno Ricardo Esteves. "Estudo da resistência de juntas adesivas em L entre alumínio e material compósito". Mestrado, 2015. http://hdl.handle.net/10400.22/7167.
  10. Ribeiro, Filipe Manuel Ferreira. "Estudo da resistência e mecanismos de dano em juntas adesivas entre materiais compósitos com defeitos de adesão". Mestrado, 2015. http://hdl.handle.net/10400.22/8150.
  11. Domingues, Nuno Ricardo Esteves. "Estudo da resistência de juntas adesivas em L entre alumínio e material compósito". Mestrado, 2015. http://hdl.handle.net/10400.22/7167.
  12. Ricardo João Camilo Carbas. "Adhesively bonded functionally graded joints". Doutoramento, 2013. http://hdl.handle.net/10216/78956.
  13. Ricardo João Camilo Carbas. "Adhesively bonded functionally graded joints". Doutoramento, 2013. https://repositorio-aberto.up.pt/handle/10216/78956.
  14. Ricardo João Camilo Carbas. "Adhesively bonded functionally graded joints". Doutoramento, 2013. https://hdl.handle.net/10216/78956.
  15. Ricardo João Camilo Carbas. "Adhesively bonded functionally graded joints". Doutoramento, 2013. https://hdl.handle.net/10216/78956.
  16. Reis, Ana Cristina Malheiro dos. "Efeito da temperatura de cura na temperatura de transição vítrea de um adesivo estrutural". Mestrado, 2012. http://hdl.handle.net/10216/63347.
  17. Reis, Ana Cristina Malheiro dos. "Efeito da temperatura de cura na temperatura de transição vítrea de um adesivo estrutural". Mestrado, 2012. http://hdl.handle.net/10216/63347.
  18. Carbas, Ricardo João Camilo. "Estudo paramétrico de juntas adesivas pelo método de Taguchi". Mestrado, 2008. http://hdl.handle.net/10216/59819.
  19. Carbas, Ricardo João Camilo. "Estudo paramétrico de juntas adesivas pelo método de Taguchi". Mestrado, 2008. http://hdl.handle.net/10216/59819.
  20. Carbas, Ricardo João Camilo. "Estudo paramétrico de juntas adesivas pelo método de Taguchi". Mestrado, 2008. http://hdl.handle.net/10216/59819.
  21. Carbas, Ricardo João Camilo. "Estudo paramétrico de juntas adesivas pelo método de Taguchi". Mestrado, 2008. http://hdl.handle.net/10216/59819.

Propriedade Intelectual

Pedido provisório de patente
  1. 2022. "Single loading four-step testing apparatus for mechanical characterisation of adhesives".
    Protegido
  2. 2018. "Split Hopkinson pressure bar setup for tensile and compression testing with pneumatic impact actuator".
  3. 2018. "Transverse reinforcement of composite materials with high toughness and ductility surface layers".
  4. 2017. "Magnetization of cork particles for manufacturing components or composite materials".
    Divulgado
  5. 2017. "Apparatus to Test the Adhesion Force of Product Packaging Capsules under Pressure Loads".
    Divulgado
  6. 2017. "High Performance Thermal Chamber for Material Testing".
    Divulgado
  7. 2016. "Torsion Machine for Adhesive Joints".
    Divulgado
  8. 2013. "Functionally Graded Cure by Induction Heating".
    Divulgado

Outros

Outra produção
  1. Structural adhesives modified with thermally expandable particles. In this study, the behaviour of two structural adhesives modified with thermally expandable particles (TEPs) was investigated as a preliminary study for further investigations on the potential of TEPs in adhesive joints. Tensile bulk tests were performed to get the tensile properties of the adhesives and TEPs-modified adhesives. In order to determine the expansion temperature of the particles whil. 2015. Banea, Mariana D.; Silva, Lucas da; Carbas, Ricardo J.C.; Campilho, Raul. http://hdl.handle.net/10400.22/7394.
    10.1080/00218464.2014.985785
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2021/10/22 The influence of polymeric laminate amount in the strength and failure mode of hybrid joints nd International Conference on Advanced Joining Processes AJP2021
(Sintra, Portugal)
2021/07/09 The strength of hybrid SLJs reinforced with different thicknesses of polymeric laminates 6th International Conference on Structural Adhesive Bonding 2021
(Porto, Portugal)
2021/07/08 The effect of different metallic laminates on the strength of CFRP SLJs using metal laminate adherends 6th International Conference on Structural Adhesive Bonding 2021
(Porto, Portugal)
2020/11/06 Joint strength of toughened transverse composites under different loading rates 3rd International Conference on Materials Design and Applications MDA 2020
(Porto, Portugal)
2020/11/05 Effect of adhesive thickness on butt adhesive joints under torsional loads 3rd International Conference on Materials Design and Applications MDA 2020
(Porto, Portugal)
2020/10/15 Advanced Joining Processes Unit: A fully independent research group 1st International Conference on Science and Technology Education STE 2020
(Porto, Portugal)
2020/03/05 Shear characterization of structural adhesives under different torsional load rates 1st International Conference on Industrial Applications of Adhesives 2020
(Funchal, Portugal)
2020/03 Joint strength improvement using toughened transverse composite adherends 1st International Conference on Industrial Applications of Adhesives 2020
(Funchal, Portugal)
2019/10/25 Strength of laminates aluminium carbon-fibre joints under impact loads 1st International Conference on Advanced Joining Processes 2019
(Ponta Delgada, Portugal)
2019/07/11 Strength of hybrid laminates aluminium carbon-fibre joints under impact loads 5th International Conference on Structural Adhesive Bonding 2019
(Porto, Portugal)
2018/09/06 Strength of hybrid laminates metal-carbon fibre joints with different lay-up configurations Euradh – CLBA 2018
(Lisboa, Portugal)
2018/07/06 CFRP joints with hybrid laminates metal-carbon fibre MDA2018 - 2nd International Conference on Materials Design and Applications
(Porto, Portugal)
2018/02/27 Strength of CFRP Joints reinforced with Aluminum Laminates 6th World Congress on Adhesion and Related Phenomena and 41st Annual Meeting of The Adhesion Society
(San Diego, Estados Unidos)
2017/07/06 Strength of hybrid laminates aluminium carbon-fibre joints with different lay-up configurations AB2017 - 4th International Conference on Structural Adhesive Bonding
(Portugal)
2016/06/30 Graded Adhesive Joints by Nanoparticles Reinforcement MDA2016 - 1st International Conference on Materials Design and Applications
(Portugal)
2016/01/26 Functionally graded adhesive joints by mixing of carbon-black nanoparticles CLBA2016 - 3ª Conferência Luso-Brasileira de Adesão e Adesivos
(Portugal)
2016/01/26 Strength and failure modes in composite bonded joints with defects CLBA2016 - 3ª Conferência Luso-Brasileira de Adesão e Adesivos
(Portugal)
2015/06/22 Effect of Carbon Black Nanoparticles concentration on the Mechanical properties of a Structural Epoxy Adhesive MATERIAIS 2015 - VII International Materials Symposium and 17th Conference of Sociedade Portuguesa de Materiais
(Portugal)
2014/10/24 Juntas adesivas funcionalmente graduadas por mistura graduada de nano-partículas ENMEC2014 - 3º Encontro Português de Materiais e Estruturas Compósitas
(Lisboa, Portugal)
2014/06/24 Effect of post-cure on adhesively bonded functionally graded joints by induction heating The Adhesion Society - 37th Annual Meeting of The Adhesion Society
(San Diego, Estados Unidos)
2014/04/23 Functionally graded adhesive patch repairs in civil applications EURADH '14 - 10th European Adhesion Conference
IEEE (Portugal)
2013/07/04 Adhesively bonded functionally graded joints by induction heating AB2013 - 2nd International Conference on Structural Adhesive Bonding
(Porto, Portugal)
2013/06/24 Adhesively Bonded Functionally Graded Joints 4th International Conference on Integrity, Reliability & Failure
(Funchal, Portugal)
2012/11/08 Effect of Post-Cure on the Glass Transition Temperature and Mechanical Properties of Epoxy Adhesives Conferência Luso-Brasileira de Adesão e Adesivos
(Rio de Janeiro, Brasil)
2012/07/22 Effect of Cure Temperature on the Glass Transition Temperature of an epoxy adhesive 15th International Conference on Experimental Mechanics
(Porto, Portugal)
2011/09/29 Effect of Curing Temperature on the Mechanical Properties of Structural Adhesives XII Congreso de Adhesión y Adhesivos
(San Sebastián, Espanha)

Orientação

Título / Tema
Papel desempenhado 		Curso (Tipo)
Instituição / Organização
2019/03/01 - Atual Graded adhesive joints with dissimilar substrates
Coorientador
 Mestrado em Engenharia Mecânica (Mestrado)
Centro Federal de Educação Tecnólogica Celso Suckow da Fonseca, Brasil
2019/03/01 - Atual Optimization of CFRP joints with fibre metal laminates
Coorientador
 Mestrado Integrado em Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2019/02/01 - Atual Design methodology for impact resistant bonded multi-material automotive structures
Orientador
 Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2018/03/01 - Atual Development of a three-station creep machine for adhesive joints testing
Coorientador
 Mestrado integrado em Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2016/02/01 - Atual Reabilitac¸a~o este´tica minimamente invasiva de casos de agenesia de incisivos laterais superiores: comportamento qui´mico- meca^nico
Coorientador
 Ciências Biológicas Aplicadas à Saúde (Doutoramento)
Cooperativa de Ensino Superior Politécnico e Universitário, Portugal
2020/03/01 - 2020/07/21 Adhesively bonded tubular metal-polymer joints
Orientador
 Engenharia Mecânica
Universidade do Porto Faculdade de Engenharia, Portugal
2018/09/17 - 2019/02/15 Characterization of the fatigue behavior of a structural adhesive for high performance applications
Coorientador
 Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2018/02/05 - 2018/07/09 Optimization of CFRP joints with fibre metal laminates
Coorientador
 Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2017/09/18 - 2018/03/15 CFRP joints with hybrid laminates metal-carbon fibre
Coorientador
 Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2016/02/15 - 2016/07/18 CFRP joints with hybrid laminates aluminium-carbon fibre
Coorientador
 Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2015/02/16 - 2016/07/12 Novel adhesive bonding joint concept using fibre metal laminates
Coorientador
 Engenharia Mecânica e Gestão Industrial (Mestrado)
Instituto Politécnico de Viseu, Portugal
2014/09/15 - 2015/11/13 Estudo da resistência e mecanismos de dano em juntas adesivas entre materiais compósitos com defeitos de adesão
Coorientador
 Engenharia Mecânica (Mestrado)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015/02/16 - 2015/07/16 Multi-material adhesive joints for automotive industry
Coorientador
 Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2015/02/16 - 2015/07/16 Optimization of CFRP joints with fibre metal laminates
Coorientador
 Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2014/09/15 - 2015/06/25 Estudo da resistência de juntas adesivas em L entre alumínio e material compósito
Coorientador
 Engenharia Mecânica (Mestrado)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014/02/10 - 2014/07/10 Functionally graded joints by dielectric heating
Coorientador
 Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2013/02/13 - 2013/07/22 Functionally Graded Adhesive Patch Repairs in Civil Applications
Coorientador
 Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2011/09/12 - 2012/02/10 Efeito da temperatura de cura na temperatura de transição vitrea de um adesivo estrutural
Coorientador
 Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação) 		Instituição / Organização
2021 - Atual Part of the scientific committee of the IAMaC (Ibero American Conference on Composite Materials) (2021)
2019/02/18 - Atual Part of the scientific committee of the AJP (International Conference on Advanced Joining Processes) conference (2019/10/24 - 2019/10/25)
Conferência (Membro da Comissão Científica)
 Universidade do Porto Faculdade de Engenharia, Portugal
2018/07/16 - Atual Part of the scientific committee of the MDA (International Conference on Materials Design and Applications) conferences (2018/07/05 - 2018/07/06)
Conferência (Membro da Comissão Científica)
 Universidade do Porto Faculdade de Engenharia, Portugal
2018 - Atual Part of the scientific committee of the CLBA (Conferência Luso-Brasileira em Adesivos e Adesão) (2018)
2021/07/29 - 2021/07/30 IAMaC2021: 1ª Conferência Ibero-Americana de Materiais Compósitos (2021/07/29 - 2021/07/30)
Conferência (Coorganizador)
 Universidade do Porto Faculdade de Engenharia, Portugal

Participação em evento

Descrição da atividade
Tipo de evento 		Nome do evento
Instituição / Organização
2018/07/05 - 2018/07/06 Chair of the section 7A - Joining
Conferência
 MDA2018 - 2nd International Conference on Materials Design and Applications
2017/05/10 - 2017/07/28 Using the Lean Start-Up approach, BIP – Business Ignition Programme – aims to build and test alternative business models for technologies developed in academia. Business models was presented and validated on the market, promoting technology transfer and the creation of new businesses.
Outro
 BIP - Business Ignition Programme
Universidade do Porto, Portugal
2017/07/06 - 2017/07/07 Chair of the section 2B - Adhesive Properties I
Conferência
 AB2017 - 4th International Conference on Structural Adhesive Bonding 2017
2016/06/30 - 2016/07/01 Chair of section 2A - Adhesive Bonding
Conferência
 MDA2016 - 1st International Conference on Materials Design and Applications
2016/01/25 - 2016/01/27 Chair of section 5A
Conferência
 CLBA2016 - 3ª Conferência Luso-Brasileira de Adesão e Adesivos

Júri de grau académico

Tema
Tipo de participação 		Nome do candidato (Tipo de grau)
Instituição / Organização
2018/10/31 Estudo numérico de juntas adesivas mistas solicitadas ao impacto
Arguente
 Luís António Salgueiro Maia (Mestrado)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018/10/31 Influência dos parâmetros e critérios dos modelos de dano coesivo na previsão da resistência ao impacto de juntas adesivas
Arguente
 Tiago Filipe Campos Pereira (Mestrado)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017/11/02 Validação do método de elementos finitos eXtendido para a previsão do comportamento de juntas adesivas em T
Arguente
 Filipe José Pinho Moreira (Mestrado)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017/11/02 Validação de envelopes de fratura de adesivos obtidos em ensaios de fratura em modo misto para a previsão de resistência de juntas de modo misto
Arguente
 José Pedro Silva Moreira Barros Ribeiro (Mestrado)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015/11/04 Estudo e otimização de juntas do tipo T-peel soldadas, adesivas e híbridas
Arguente
 Fernando Jorge da Silva de Almeida (Mestrado)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015/11/04 Caraterização das propriedades mecânicas e de fratura de um adesivo estrutural de alta ductilidade
Arguente
 João Pedro Ramos Monteiro (Mestrado)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014/11/11 Influência do tipo de adesivo em juntas híbridas soldadas-adesivas
Arguente
 Gustavo Pereira Marques (Mestrado)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014/07/16 Aplicação de métodos numéricos avançados para a previsão de resistência de ligações adesivas
Arguente
 Tiago Adelino Brandão Fernandes (Mestrado)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Arbitragem científica em revista

Nome da revista (ISSN) Editora
2020 - Atual Marine Structures
2019/01/22 - Atual Journal of CO2 Utilization (2212-9820) Elsevier
2018/09/24 - Atual Engineering Fracture Mechanics (0013-7944) Elsevier
2018/06/15 - Atual Composites Science and Technology (0266-3538) Elsevier
2018/06/04 - Atual Thermochimica Acta (0040-6031) Elsevier
2018/05/22 - Atual Journal of Adhesion Science and Technology (1568-5616) Informa UK (Taylor & Francis)
2018/02/05 - Atual Journal of the Brazilian Society of Mechanical Sciences and Engineering (1678-5878) Springer-Verlag
2017/12/31 - Atual Materials & Design (0264-1275) Elsevier
2017/09/20 - Atual Aircraft Engineering and Aerospace Technology (0002-2667) Emerald (MCB UP )
2017/09/11 - Atual Advances in aircraft and spacecraft science (2287-528X) Techno-Press
2017/08/25 - Atual Materials Letters (0167-577X) Elsevier
2017/04/27 - Atual Frattura ed Integrità Strutturale (1971-8993) Gruppo Italiano Frattura
2016/11/01 - Atual Composites Part B Engineering (1359-8368) Elsevier
2016/08/09 - Atual Aerospace Science and Technology (1270-9638) Elsevier
2016/06/29 - Atual International Journal of Adhesion and Adhesives (0143-7496) Elsevier
2015/11/23 - Atual Engineering Failure Analysis (1350-6307) Elsevier
2015/08/31 - Atual Composite Structures (0263-8223) Elsevier
2015/07/07 - Atual Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2041-3076) SAGE Publications
2015/01/06 - Atual Applied Adhesion Science (2196-4351) Springer (Biomed Central Ltd.)
2014/07/29 - Atual The Journal of Adhesion (1545-5823) Informa UK (Taylor & Francis)

Consultoria / Parecer

Descrição da atividade Instituição / Organização
2017/09/01 - Atual JOHN DEERE (Moline, USA) Study of the small glass beads influence (used to ensure the thickness of the adhesive) on the mechanical behaviour (elasto-plastic properties and fracture) of an adhesive subject to quasi-static and fatigue loads.
2016/07/01 - 2017/01/31 BICAFE (São Pedro da Cova, Portugal) Adhesion study between a coffee pod and the film that seals the coffee inside the pod.
2015/12/01 - 2016/12/31 HONDA R&D Co., Ltd. (Saitama, Japan) •Mode I, II and mixed mode (I+II) fracture energy tests of 3 types of adhesives for automotive industry.
2014/06/01 - 2015/06/30 BOSCH (Cacia, Portugal) Study of glass / aluminum bonding in an heater.
2014/09/01 - 2015/01/31 AMTROL (Guimarães, Portugal) Study of adhesion between HDPE and composite (PP + glass).
2014/01/01 - 2014/01/31 OLI Oliveira & Irmão Sa (Aveiro, Portugal) Problems of adhesion between a glass and a piece of plastic in the construction of a cistern.
2012/09/01 - 2012/12/31 NAGASE CHEMTEX (Osaka, Japan) • Mode I and Mode II frature tests of an adhesive developed for the manufacture of wind turbines, September - December 2012.
2012/11/01 - 2012/11/30 COLEP (Vale de Cambra, Portugal) Adhesion problems of metallic packaging cans.

Membro de associação

Nome da associação Tipo de participação
2011/12/15 - Atual Associação Portuguesa de Adesão e Adesivos (APAA) Membro fundador

Membro de comissão

Descrição da atividade
Tipo de participação 		Instituição / Organização
2022 - Atual Editor-in-Chief: Engineering Manufacturing Letters (EML) Universidade do Porto Faculdade de Engenharia, Portugal
2022 - Atual Member of the editorial board: Discover Mechanical Engineering (Springer)
Membro
2021 - Atual Member of the editorial board: Materials (MDPI)
Membro
2020 - Atual Member of the editorial board of the JAJP (Journal of Advanced Joining Processes) journal
2018/07/16 - Atual Member of the editorial board of the JMDA (Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications) journal.
Membro