???global.info.a_carregar???
Bárbara Perry Gouveia is Assistant Professor in the Manufacturing and Industrial Management Academic Unit of the Mechanical Engineering Department at Instituto Superior Técnico, Universidade de Lisboa. She is researcher of IDMEC (Institute of Mechanical Engineering), LAETA (Associated Laboratory for Energy, Transports and Aeronautics). Bárbara Gouveia had the Diploma of Mechanical Engineering in 1993 from the Instituto Superior Técnico (IST), MSc degree in Mechanical Engineering in 1995 and PhD in Mechanical Engineering, in 2003, from the Instituto Superior Técnico (IST). My PhD was developed in collaboration with the Danish Technical University (DTU) in Copenhagen. Her teaching and research activities are developed the field of Manufacturing Technologies since 1995. She has been the responsible professor of several courses, in her field of expertise, in different bachelor and master of science programs of Instituto Superior Técnico, and have supervised many postgraduate theses. Bárbara Gouveia is co-author of one book on Manufacturing Technologies and several scientific articles published in international journals and conferences in the field of manufacturing and numerical simulation. She has participated and coordinated some European and National Projects. Her activity also includes coordination in technical consultation and industry support works.
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Bárbara Perry Pereira Alves Gouveia Almeida

Nomes de citação

  • Perry Gouveia, Bárbara
  • Bárbara P P A Gouveia

Identificadores de autor

Ciência ID
C915-5D28-F532
ORCID iD
0000-0001-9930-8889
Scopus Author Id
6602978882

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica
Formação
Grau Classificação
2003/07/29
Concluído
 Engenharia Mecânica (Doutoramento)
Especialização em Sem especialidade
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Estudos Teóricos e Experimentais no Domínio da Enformabilidade e do Regime Estacionário de Processos de Deformação Plástica na Massa" (TESE/DISSERTAÇÃO)
1995/12
Concluído
 Engenharia Mecânica (Mestrado)
Especialização em Produção
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Análise Teórico-Experimental da Enformabilidade no Processos de Enformação Plástica em Massa" (TESE/DISSERTAÇÃO)
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento 		Empregador
2003/07/29 - Atual Professor Auxiliar (Docente Universitário) Universidade de Lisboa Instituto Superior Técnico, Portugal
1995/12 - 2003/07 Assistente (Docente Universitário) Universidade de Lisboa Instituto Superior Técnico, Portugal
Projetos

Projeto

Designação Financiadores
2023/08/01 - 2025/12/31 PRODUTECH R3 ¿ Recuperação-Resiliência-Reindustrialização
C645808870-00000067 ¿ projeto de investimento nº 60
Universidade de Lisboa Instituto Superior Técnico, Portugal
Em curso
2021/01/01 - 2025/12/31 Laboratório Associado em Energia, Transportes e Aeroespacial
LA/P/0079/2020
10.54499/LA/P/0079/2020
Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2022/10/01 - 2025/09/30 LOGMASTER - Logistics Master Degree to setspecialists for Supply Chain Management and Logistics
2022-1-RO01-KA220-HED-000088037
Investigador
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Erasmus Plus
Em curso
2022/02/01 - 2024/01/31 ALLIES, Digital Traininig Tools In Steel Structure Integrity
2021-1-RO01-KA220-HED-000032181
Investigador
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Erasmus Plus
Em curso
2022/01/01 - 2023/12/31 DIGIGREEN, Improved workforce to set transition from manufacturing to digital green fabrication
2021-1-RO01-KA220-VET-000028028
Investigador
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Erasmus Plus
Concluído
2020/01/01 - 2023/12/31 Associate Laboratory of Energy, Transports and Aeronautics
UIDB/50022/2020
10.54499/UIDB/50022/2020
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2020/07/01 - 2023/06/30 S4Plast - - Sustainable Plastics Advanced Solutions
POCI-01-0247-FEDER-046089
Investigador
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Autoridade de Gestão do Programa Operacional Competitividade e Internacionalização
Em curso
2019/10/01 - 2022/03/31 DIGIMAN - Digital Manufacturing Master Degree to set specialists for the dawn of the Industry 4.0
2018-1-RO01-KA202-049371
Investigador
Erasmus Plus
Concluído
2018/03/01 - 2021/02/28 TOOLING4G, Advanced Tools for Smart Manufacturing
POCI-01-0247-FEDER-024516
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Autoridade de Gestão do Programa Operacional Competitividade e Internacionalização
Concluído
2018/09/03 - 2020/03/02 SIMUL3F - Development of new numerical tools and constitutive models to simulate the fused filament fabrication - a low-cost additive manufacturing process
MIT-EXPL/ISF/0084/2017
Co-Investigador Responsável (Co-IR)
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Instituto de Engenharia Mecânica, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2017 - 2020 Admire - Alliance for AdDitive Manufacturing between Industry and univeRsitiEs
575938-EPP-1-2016-1-UK-EPPKA2-KA
 Erasmus Plus
Concluído
2019/01/01 - 2019/12/31 Associate Laboratory of Energy, Transports and Aeronautics
UID/EMS/50022/2019
Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2017 - 2019 Manumobile
2015-1-UK01-KA202-013823
 Erasmus Plus
Concluído
2010/01/01 - 2013/06/30 Fabrico de scaffolds com factores de crescimento para regeneração de tecidos ósseos por Impressão 3D
PTDC/EME-TME/103375/2008
Instituto de Engenharia Mecânica, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2011/01/01 - 2012/12/31 Projecto Estratégico - LA 22 - 2011-2012
PEst-OE/EME/LA0022/2011
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2009/03/01 - 2011 AR-ÁGUA - Intercoolers de nova geração
QREN 5723/2009
Instituto de Engenharia Mecânica, Portugal
Concluído
Produções

Publicações

Artigo em revista
  1. Silva, Catarina; Pais, Ana Isabel; Caldas, Gabriela; Gouveia, Barbara P. P. A.; Alves, Jorge Lino; Belinha, Jorge. "Study on 3D printing of gyroid-based structures for superior structural behaviour". Progress in Additive Manufacturing 6 4 (2021): 689-703. http://dx.doi.org/10.1007/s40964-021-00191-5.
    Publicado • 10.1007/s40964-021-00191-5
  2. Tiago Pires; Jorge Santos; Rui B. Ruben; Bárbara P. Gouveia; André P.G. Castro; Paulo R. Fernandes. "Numerical-experimental analysis of the permeability-porosity relationship in triply periodic minimal surfaces scaffolds". Journal of Biomechanics 117 (2021): 110263-110263. https://doi.org/10.1016/j.jbiomech.2021.110263.
    10.1016/j.jbiomech.2021.110263
  3. Afonso, João Araújo; Alves, Jorge Lino; Caldas, Gabriela; Gouveia, Barbara Perry; Santana, Leonardo; Belinha, Jorge. "Influence of 3D printing process parameters on the mechanical properties and mass of PLA parts and predictive models". Rapid Prototyping Journal 27 3 (2021): 487-495. http://dx.doi.org/10.1108/rpj-03-2020-0043.
    Publicado • 10.1108/rpj-03-2020-0043
  4. "Influence of 3D printing process parameters on the mechanical properties and mass of PLA parts and predictive models". Rapid Prototyping Journal (2021): https://www.emerald.com/insight/content/doi/10.1108/RPJ-03-2020-0043/full/html.
    10.1108/RPJ-03-2020-0043
  5. Perry Gouveia, Bárbara. "On the permeability of TPMS scaffolds". Journal of the Mechanical Behavior of Biomedical Materials (2020): http://dx.doi.org/10.1016/j.jmbbm.2020.103932.
    Publicado • 10.1016/j.jmbbm.2020.103932
  6. Andre Castro; T. Pires; J. E. Santos; B.P.P.A. Gouveia; Paulo R Fernandes. "Reply to Comment “Assessing Porous Media Permeability in Non-Darcy Flow: A Re-Evaluation Based on the Forchheimer Equation”". Materials (2020): https://www.mdpi.com/1996-1944/13/11/2544.
    10.3390/ma13112544
  7. Castro, A.P.G.; Pires, T.; Santos, J.E.; Gouveia, B.P.; Fernandes, P.R.. "Permeability versus design in TPMS scaffolds". Materials 12 8 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85065671517&partnerID=MN8TOARS.
    10.3390/ma12081313
  8. Castilho, M.; Rodrigues, J.; Pires, I.; Gouveia, B.; Pereira, M.; Moseke, C.; Groll, J.; Ewald, A.; Vorndran, E.. "Fabrication of individual alginate-TCP scaffolds for bone tissue engineering by means of powder printing". Biofabrication 7 1 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84924310031&partnerID=MN8TOARS.
    10.1088/1758-5090/7/1/015004
  9. Castilho, M.; Gouveia, B.; Pires, I.; Rodrigues, J.; Pereira, M.. "The role of shell/core saturation level on the accuracy and mechanical characteristics of porous calcium phosphate models produced by 3Dprinting". Rapid Prototyping Journal 21 1 (2015): 43-55. http://www.scopus.com/inward/record.url?eid=2-s2.0-84921414197&partnerID=MN8TOARS.
    10.1108/RPJ-02-2013-0015
  10. Castilho, M.; Dias, M.; Vorndran, E.; Gbureck, U.; Fernandes, P.; Pires, I.; Gouveia, B.; et al. "Application of a 3D printed customized implant for canine cruciate ligament treatment by tibial tuberosity advancement". Biofabrication 6 2 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84899499112&partnerID=MN8TOARS.
    10.1088/1758-5082/6/2/025005
  11. Pires, I.; Gouveia, B.; Rodrigues, J.; Fonte, R.. "Characterization of sintered hydroxyapatite samples produced by 3D printing". Rapid Prototyping Journal 20 5 (2014): 413-421. http://www.scopus.com/inward/record.url?eid=2-s2.0-84925305877&partnerID=MN8TOARS.
    10.1108/RPJ-05-2012-0050
  12. Castilho, M.; Dias, M.; Gbureck, U.; Groll, J.; Fernandes, P.; Pires, I.; Gouveia, B.; Rodrigues, J.; Vorndran, E.. "Fabrication of computationally designed scaffolds by low temperature 3D printing". Biofabrication 5 3 (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84883130621&partnerID=MN8TOARS.
    10.1088/1758-5082/5/3/035012
  13. Castilho, M.; Pires, I.; Gouveia, B.; Rodrigues, J.. "Structural evaluation of scaffolds prototypes produced by three-dimensional printing". International Journal of Advanced Manufacturing Technology 56 5-8 (2011): 561-569. http://www.scopus.com/inward/record.url?eid=2-s2.0-80053562289&partnerID=MN8TOARS.
    10.1007/s00170-011-3219-4
  14. Gouveia, B.P.P.A.; Alves, M.L.; Rosa, P.A.R.; Rodrigues, J.M.C.; Martins, P.A.F.. "End forming of thin-walled tubes using a die". International Journal of Mechatronics and Manufacturing Systems 1 2-3 (2008): 183-194. http://www.scopus.com/inward/record.url?eid=2-s2.0-84951716528&partnerID=MN8TOARS.
    10.1504/IJMMS.2008.020504
  15. Alves, M.L.; Almeida, B.P.P.; Rosa, P.A.R.; Martins, P.A.F.. "End forming of thin-walled tubes". Journal of Materials Processing Technology 177 1-3 (2006): 183-187. http://www.scopus.com/inward/record.url?eid=2-s2.0-33746100682&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2006.04.040
  16. Alves, M.L.; Gouveia, B.P.P.; Rosa, P.A.R.; Martins, P.A.F.. "On the analysis of the expansion and reduction of thin-walled tubes using a die". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 220 6 (2006): 823-835. http://www.scopus.com/inward/record.url?eid=2-s2.0-34247168448&partnerID=MN8TOARS.
    10.1243/09544054JEM436
  17. Gouveia, B.P.P.; Alves, M.L.; Rosa, P.A.R.; Martins, P.A.F.. "Compression beading and nosing of thin-walled tubes using a die: Experimental and theoretical investigation". International Journal of Mechanics and Materials in Design 3 1 (2006): 7-16. http://www.scopus.com/inward/record.url?eid=2-s2.0-33846545082&partnerID=MN8TOARS.
    10.1007/s10999-006-9009-8
  18. Almeida, B.P.P.; Alves, M.L.; Rosa, P.A.R.; Brito, A.G.; Martins, P.A.F.. "Expansion and reduction of thin-walled tubes using a die: Experimental and theoretical investigation". International Journal of Machine Tools and Manufacture 46 12-13 (2006): 1643-1652. http://www.scopus.com/inward/record.url?eid=2-s2.0-33746333316&partnerID=MN8TOARS.
    10.1016/j.ijmachtools.2005.08.018
  19. Gouveia, B.P.P.A.; Rodrigues, J.M.C.; Martins, P.A.F.; Bay, N.. "Physical modelling and numerical simulation of the round-to-square forward extrusion". Journal of Materials Processing Technology 112 2-3 (2001): 244-251. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035872853&partnerID=MN8TOARS.
    10.1016/S0924-0136(01)00725-7
  20. Gouveia, B.P.P.A.; Rodrigues, J.M.C.; Bay, N.; Martins, P.A.F.. "Deformation analysis of the round-to-square extrusion: A numerical and experimental investigation". Finite elements in analysis and design 35 3 (2000): 269-282. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033751477&partnerID=MN8TOARS.
    10.1016/S0168-874X(99)00070-0
  21. Gouveia, B.P.P.A.; Rodrigues, J.M.C.; Martins, P.A.F.. "Ductile fracture in metalworking: Experimental and theoretical research". Journal of Materials Processing Technology 101 1 (2000): 52-63. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033876678&partnerID=MN8TOARS.
    10.1016/S0924-0136(99)00449-5
  22. Gouveia, B.P.P.A.; Rodrigues, J.M.C.; Bay, N.; Martins, P.A.F.. "Finite-element modelling of cold forward extrusion". Journal of Materials Processing Technology 94 2 (1999): 85-93. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033615118&partnerID=MN8TOARS.
    10.1016/S0924-0136(99)00084-9
  23. Petersen, S.B.; Gouveia, B.P.P.A.; Rodrigues, J.M.C.; Martins, P.A.F.. "A metal-forming approach to automatic generation of graded initial quadrilateral finite element meshes". Engineering Computations (Swansea, Wales) 15 5 (1998): 577-587. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031623893&partnerID=MN8TOARS.
  24. Gouveia, B.P.P.A.; Rodrigues, J.M.C.; Martins, P.A.F.. "Steady-state finite-element analysis of cold forward extrusion". Journal of Materials Processing Technology 73 1-3 (1998): 281-288. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031647530&partnerID=MN8TOARS.
  25. Gouveia, B.P.P.A.; Rodrigues, J.M.C.; Martins, P.A.F.. "Finite element modelling of cold forward extrusion using updated Lagrangian and combined Eulerian-Lagrangian formulations". Journal of Materials Processing Technology 80-81 (1998): 647-652. http://www.scopus.com/inward/record.url?eid=2-s2.0-4243557801&partnerID=MN8TOARS.
  26. Gouveia, B.P.P.A.; Rodrigues, J.M.C.; Martins, P.A.F.. "Fracture predicting in bulk metal forming". International Journal of Mechanical Sciences 38 4 (1996): 361-372. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030128844&partnerID=MN8TOARS.
    10.1016/0020-7403(95)00069-0
Capítulo de livro
  1. João P. M. Pragana; M. Beatriz Silva; Bárbara P. P. A. Gouveia. "Bulk Metal Forming Processes: Analytical and Numerical Analysis". 2024.
    10.1007/978-3-031-48468-1_4
Livro
  1. Perry Gouveia, Bárbara; 6E12-FAFE-450D; Jorge Manuel da Conceição Rodrigues. Tecnologia da Deformação Plástica – Vol. III – Exercícios Resolvidos. Lisboa, Portugal: Escolar Editora. 2011.
    Publicado
Resumo em conferência
  1. Castro, A. P. G.; Ruben, Rui; Fernandes, Paulo R.; Perry Gouveia, Bárbara. "On The Permeability of 3D Printed TPMS Scaffolds". Trabalho apresentado em ESB2019, 25th Congress of the European Society of Biomechanics, Viena, 2019.
    Publicado
  2. Castilho, Miguel; Dias, Marta; Fernandes, Paulo R.; Folgado, João; Pires, Inês; Perry Gouveia, Bárbara; Armés, Henrique; et al. "An optimized bone implant for tibial tuberosity advancement procedure in dogs: design, printing and in vivo evaluation". Trabalho apresentado em 12th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2014), Amesterdão, 2014.
    Publicado