???global.info.a_carregar???
João Pacheco has a PhD and a MSc in Civil Engineering from IST, University of Lisbon. His research interests are 3D printing of concrete, structural testing, reliability analysis & structural codes and sustainable concrete development. João started working at the CERIS research centre (February 2025) in the Structural Concrete group and is developing a research line on the structural behaviour of 3D printed concrete. In 2020 and after his PhD, João was the coordinator of the “Novel Cementitious materials and Innovation in Manufacturing” research area of c5Lab - Sustainable Construction Materials Association, a collaborative laboratory owned by IST, the Portuguese Laboratory for Civil Engineering, ATIC and the two Portuguese cement producers (CIMPOR and SECIL). This research area comprised 17 researchers and 12 internal projects, four coordinated by him (related to the industrial production of ready-mixed concrete and dry mortars with recycled aggregates, mortars for 3D printing, and the structural behaviour of 3D printed concrete elements, all in close collaboration with the industry). Concerning competitively-funded projects, João was the PI of c5Lab in DISCOVER, an Horizon Europe project on robotics and AI for optimized resource recovery of demolition products, and of the ERAMIN3 transnational project RECYCL3D, about fine recycled aggregates in mortars for 3D printing. João is a member of two national standardization task groups related to the Eurocodes (IPQ/CT115/GT04 and IPQ/CT115/SC2) and supported WG4 of CEN/TC250 in the development of the Technical Specification prEN 19101, co-authoring 11 chapters of its Background Report, six as a first author. With extensive involvement in the fib, João has co-authored an fib Bulletin (under review) within scope of fib Task Group 4.7 and served on the Organizing Committees for fib Symposium 2021 and fib Congress 2026, and contributed as a Scientific Committee member for two fib PhD Symposia and another international conference (CLBMCS 2024). João also co-chaired seven parallel sessions of international conferences. His PhD thesis concerned the reliability-based adaptation of EN 1992-1 ULS formulae for the design of recycled aggregate concrete and his MSc dissertation, on the structural behaviour of recycled aggregate concrete, won a National Award for the best MSc dissertation in structural concrete. João has supervised three concluded Masters’ Dissertations and three PhD Thesis (one concluded, two ongoing), all of them about Structural Concrete, and has authored over 40 scientific papers indexed in the Science Citation Index (Scopus: over 1364 citations and h-index of 17). João was also the first author of the Science for Policy Report of the Joint Research Centre of the European Commission: Use of recycled aggregates in concrete – Opportunities for upscaling in Europe.
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
João Nuno Pacheco

Nomes de citação

  • Pacheco, João
  • Pacheco, João Nuno

Identificadores de autor

Ciência ID
D414-B33B-01E0
ORCID iD
0000-0001-9348-1226
Google Scholar ID
UwbazIsAAAAJ&hl
Scopus Author Id
56800010700

Endereços de correio eletrónico

  • joaonpacheco@ist.utl.pt (Profissional)

Moradas

  • Av. Rovisco Pais, 1049-001, Lisboa, Lisboa, Portugal (Profissional)

Websites

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Civil - Engenharia Civil

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Português (Idioma materno)
Inglês Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2)
Formação
Grau Classificação
2015/09 - 2020/02
Concluído
 Engenharia Civil (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Reliability analysis of eco-concrete" (TESE/DISSERTAÇÃO)
 Pass with distinction and honour
2014
Concluído
 Engenharia Civil (Mestrado)
Especialização em Estruturas
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Desempenho de estruturas executadas em betão com agregados grossos reciclados provenientes da indústria de pré-fabricação" (TESE/DISSERTAÇÃO)
 16/20
Percurso profissional

Ciência

Categoria Profissional
Instituição de acolhimento 		Empregador
2025/02/10 - Atual Investigador Auxiliar (carreira) (Investigação) Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal
Universidade de Lisboa Instituto de Investigação e Inovação em Engenharia Civil para a Sustentabilidade, Portugal
2015/09 - Atual Investigador (Investigação) Universidade de Lisboa Instituto de Investigação e Inovação em Engenharia Civil para a Sustentabilidade, Portugal
2020/04/16 - 2025/02/09 Investigador Contratado (Investigação) c5Lab - Sustainable Construction Materials Association, Portugal
Projetos

Bolsa

Designação Financiadores
2025/02/10 - 2028/05/31 DISCOVER
Grant agreement ID: 101129909
Investigador
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Horizon Europe
Em curso
2024/06/01 - 2025/02/09 DISCOVER
Grant agreement ID: 101129909
Investigador responsável
c5Lab - Sustainable Construction Materials Association, Portugal
 Horizon Europe
Em curso
2019/10 - 2020/04 Decarboncrete
PTDC/ECI-CON/31138/2017
Bolseiro de Investigação
Universidade de Lisboa Instituto de Investigação e Inovação em Engenharia Civil para a Sustentabilidade, Portugal
 Fundação para a Ciência e a Tecnologia
Em curso
2015/09 - 2019/08 Reliability analysis of eco-concrete
Provided by PTCRIS: PD/BD/113643/2015
 Fundação para a Ciência e a Tecnologia

Projeto

Designação Financiadores
2022/05/01 - 2025/04/30 RECYCL3D - Recycled aggregates for 3D printed concrete structures
ERA-MIN3/0001/2021
Investigador responsável
c5Lab - Sustainable Construction Materials Association, Portugal
 Fundação para a Ciência e a Tecnologia
Em curso
2020/04/16 - 2024/07/01 Use of recycled materials
c5Lab WP10/C
Investigador
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Fundação para a Ciência e a Tecnologia
Em curso
2019/01/01 - 2019/12/31 Civil Engineering Research and Innovation for Sustainability
UID/ECI/04625/2019
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal

Universidade Nova de Lisboa Centro Interdisciplinar de Ciências Sociais, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2012/10 - 2014/08 BARPINP
BARPINP/AD0054/2012
Bolseiro de Iniciação Científica
Universidade de Lisboa Instituto de Investigação e Inovação em Engenharia Civil para a Sustentabilidade, Portugal
 Programa Português Para a Investigação e Desenvolvimento Associado a Grandes Contratos Públicos
Concluído
Produções

Publicações

Artigo em conferência
  1. Correia, J.R.; Pacheco, J.; Sørensen, J.D.; Garrido, M.; Firmo, J.P.; Keller, T.; Sena-Cruz, J.; et al. "DESIGN OF FIBRE-POLYMER COMPOSITE STRUCTURES (CEN/TS 19101): BASIS OF DESIGN AND EFFECTS OF TEMPERATURE AND MOISTURE". 2023.
  2. Bellei, Poliana; Veloso, J.; Flores-Colen, I.; Pacheco, João; Mendes, M. P.; Torres, I. "Argamassas de revestimento com resíduos industriais". Trabalho apresentado em Construção 2022, Guimarães, 2022.
  3. Brito, Jorge de; Pacheco, João. "Implementação da produção industrial de betão com agregados reciclados". Trabalho apresentado em Construção 2022, Guimarães, 2022.
  4. Bellei, Poliana; Veloso, J; Flores-Colen, I.; Mendes, M. P.; Pacheco, João; Torres, I.; Solstad, R.. "The use of industrial waste in coating mortars". Trabalho apresentado em ICCE2022 - Second International Conference in Construction Engineering, Damascus, 2022.
  5. Pacheco, João; Valencia, J.; Brito, Jorge de. "Comportamento no estado fresco de betão pronto com incorporação de agregados grossos reciclados". Trabalho apresentado em JPEE2022, Lisbon, 2022.
  6. Correia, J.R.; Pacheco, J.; Sørensen, J.D.; Keller, T.; Mottram, J.T.; Sena-Cruz, J.. "DESIGN OF FIBRE-POLYMER COMPOSITE STRUCTURES - EUROPEAN TECHNICAL SPECIFICATION: BASIS OF DESIGN". 2022.
  7. João Nuno Pacheco; Brito, Jorge de. "Recycled aggregate concrete: properties and behaviour, applications and production challenges". Trabalho apresentado em fib Symposium 2021: Concrete structures: New trends for eco-efficiency and performance, Lisbon, 2021.
    Publicado
  8. Qifan Ren; João Nuno Pacheco; Brito, Jorge de. "Geometrical model of concrete at the mesoscale: Parameters, shape description and generation strategy". Trabalho apresentado em fib Symposium 2021: Concrete structures: New trends for eco-efficiency and performance, Lisbon, 2021.
    Publicado
  9. Brito, Jorge de; João Nuno Pacheco. "The influence of the recycled aggregates on concrete's structural design". Trabalho apresentado em Keynote lecture of the fib Symposium 2021: Concrete structures: New trends for eco-efficiency and performance, Lisbon, 2021.
    Publicado
  10. Ren, Q.; Pacheco, J.; de Brito, J.. "Geometric model of concrete at mesoscale-parameters, shape description and generation strategies". 2021.
  11. Dias, A.B.; Pacheco, J.N.; Silvestre, J.D.; Martins, I.M.; de Brito, J.. "Sustainability of the use of recycled aggregates in concrete: From research to a practical application in the portuguese context". 2021.
  12. de Brito, J.; Pacheco, J.. "The influence of the recycled aggregates on concrete’s structural design". 2021.
  13. Bravo, M.; Evangelista, Luís; Pacheco, João; Brito, Jorge de; Valencia, J.. "Caracterização do Óxido de Magnésio e da Sua Incorporação em Materiais Cimentícios: Revisão Bibliográfica". Trabalho apresentado em Reabilitar & Betão Estrutural 2020, Lisbon, 2020.
  14. Bravo, M; Evangelista, L; Pacheco, João; Brito, Jorge de; Valencia, J. "Comportamento de Argamassas com Substituição Parcial de Cimento por Óxido de Magnésio de Diferentes Origens". Trabalho apresentado em Reabilitar & Betão Estrutural 2020, Lisbon, 2020.
  15. Bravo, M.; Evangelista, Luís; Pacheco, João; Brito, Jorge de; Valencia, J.. "Characterization of Magnesium Oxide and Its Incorporation in Cementitious Materials: Bibliographic Review". Trabalho apresentado em Reabilitar & Betão Estrutural 2020, Lisbon, 2020.
    Publicado
  16. Pacheco, João; de Brito, Jorge; Chastre, Carlos; Evangelista, Luís; Pacheco, J.; De Brito, J.; Chastre, C.; Evangelista, L.. "Reliability of the bond strength of recycled coarse aggregate concrete". Trabalho apresentado em fib Symposium 2019, Cracóvia, 2019.
    Publicado
  17. Pacheco, João; de Brito, Jorge; Chastre, Carlos (141B-6C7F-5164); Evangelista, Luís. "Towards the structural codification of recycled aggregate concrete". Trabalho apresentado em UKIERI2019 - Concrete Builder, Jalandhar, India, 2019.
    Publicado
  18. Pacheco, João; de Brito, Jorge; Chastre, Carlos (141B-6C7F-5164). "Avaliação dos resultados de resistência à compressão de betão pronto produzido em centrais portuguesas". Trabalho apresentado em Betão Estrutural 2018, Lisboa, 2018.
    Publicado
  19. Pacheco, João; de Brito, Jorge; Chastre, Carlos (141B-6C7F-5164); Evangelista, Luís. "Model uncertainty of recycled aggregate concrete beams subjected to bending". Trabalho apresentado em HISER International Conference 2018, Delft, 2018.
    Publicado
  20. Pacheco, João; de Brito, Jorge; Chastre, Carlos (141B-6C7F-5164); Evangelista, Luís. "Influência da variabilidade de agregados reciclados de betão na fiabilidade de estruturas de betão". Trabalho apresentado em CLBMCS2018 - Congresso Luso Brasileiro de Materiais de Construção Sustentáveis, Coimbra, 2018.
    Publicado
  21. Pacheco, João. "Betões com agregados grossos reciclados provenientes da indústria de pré-fabricação - desempenho material e estrutural". Trabalho apresentado em CONPAT 2015, Lisboa, 2015.
    Publicado
Artigo em revista
  1. Sundar Rathnarajan; Joao Nuno Pacheco; Francisco Capucha; Javier Valencia; Mateusz Techman; Pawel Sikora. "Seawater-mixed concretes containing supplementary cementitious materials: compressive strength, e-modulus, electrical resistivity, and life cycle assessment". Archives of Civil and Mechanical Engineering (2025): https://doi.org/10.1007/s43452-025-01132-7.
    10.1007/s43452-025-01132-7
  2. Correia, J.R.; Ascione, L.; Keller, T.; Mottram, J.T.; Sena-Cruz, J.; Paulotto, C.; Knippers, J.; et al. "Overview and Aspects of the European Technical Specification CEN/TS 19101:2022, "design of Fibre-Polymer Composite Structures"". Journal of Composites for Construction 29 2 (2025): http://www.scopus.com/inward/record.url?eid=2-s2.0-85213361717&partnerID=MN8TOARS.
    10.1061/JCCOF2.CCENG-4833
  3. Pawel Sikora; Karol Federowicz; Szymon Skibicki; Mateusz Techman; Marcin Hoffmann; Aleksandra Ludwiczak-Sarzala; Mehdi Chougan; Joao Pacheco. "Pierwszy krok w kierunku normalizacji konstrukcji betonowych wykonywanych w technologii druku 3D". Przeglad Budowlany (2024): https://doi.org/10.5604/01.3001.0054.7216.
    10.5604/01.3001.0054.7216
  4. António Ramos; Carla Marchão; João Nuno Pacheco; Alejandro Enfedaque; Dario Coronelli; Duarte Faria; Jorge de Brito; Miguel Fernández Ruiz; Rui Marreiros. "A review of punching behavior of slab–column connections with recycled coarse aggregate concrete". Structural Concrete (2024): https://doi.org/10.1002/suco.202400435.
    10.1002/suco.202400435
  5. Ren, Qifan; Pacheco, João; de Brito, Jorge. "3D mesoscale modelling of recycled aggregate concrete". Construction and Building Materials 411 (2024): 134430. http://dx.doi.org/10.1016/j.conbuildmat.2023.134430.
    Publicado • 10.1016/j.conbuildmat.2023.134430
  6. Ren, Q.; Pacheco, J.; de Brito, J.; Hu, J.. "Analysis of the influence of the attached mortar's geometry on the mechanical behaviour of recycled aggregate concrete through mesoscale modelling". Engineering Fracture Mechanics 297 (2024): http://www.scopus.com/inward/record.url?eid=2-s2.0-85184139060&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2024.109876
  7. Knapcová, V.; Pacheco, J.; de Brito, J.; Sonnenschein, R.. "Eurocode 2 design of recycled aggregate concrete elements under compression: Evaluation through model uncertainties from tests on columns". Structural Concrete (2024): http://www.scopus.com/inward/record.url?eid=2-s2.0-85183872938&partnerID=MN8TOARS.
    10.1002/suco.202300715
  8. Skibicki, Szymon; Federowicz, Karol; Hoffmann, Marcin; Chougan, Mehdi; Sibera, Daniel; Cendrowski, Krzysztof; Techman, Mateusz; et al. "Potential of Reusing 3D Printed Concrete (3DPC) Fine Recycled Aggregates as a Strategy towards Decreasing Cement Content in 3DPC". Materials (2024): https://publons.com/wos-op/publon/68640909/.
    10.3390/MA17112580
  9. Chougan, Mehdi; Skibicki, Szymon; Al-Noaimat, Yazeed A.; Federowicz, Karol; Hoffmann, Marcin; Sibera, Daniel; Cendrowski, Krzysztof; et al. "Comparative analysis of ternary blended cement with clay and engineering brick aggregate for high-performance 3D printing". Developments in the Built Environment (2024): https://publons.com/wos-op/publon/70432857/.
    10.1016/J.DIBE.2024.100529
  10. Ren, Q.; Pacheco, J.; de Brito, J.. "Mesoscale modelling of recycled aggregate concrete: A parametric analysis of properties of mesoscopic phases of RAC". Journal of Cleaner Production 478 (2024): http://www.scopus.com/inward/record.url?eid=2-s2.0-85206326249&partnerID=MN8TOARS.
    10.1016/j.jclepro.2024.143967
  11. Ren, Q.; Pacheco, J.; de Brito, J.. "Mesoscale modeling of recycled aggregate concrete: A parametric analysis of the quality and shape of aggregate". Structural Concrete (2024): http://www.scopus.com/inward/record.url?eid=2-s2.0-85202940690&partnerID=MN8TOARS.
    10.1002/suco.202400743
  12. Fernando, Tomás; Arruda, M.R.T.; Pacheco, João; Eduardo Nuno Brito Santos Júlio. "Proposal for Monolithic Coefficients for Reinforced Concrete Columns Strengthened by Partial Reinforced Concrete Jacketing". Angolan Industry and Chemical Engineering Journal 3 3 (2023): Vol. 3 No. 3 (2023): Angolan Industry & Chemical Engineering SE | Angolan Industry and Chemical Engineering Journal (aincej.com).
    Publicado
  13. Al-Noaimat, Y.A.; Chougan, M.; Albar, A.; Skibicki, S.; Federowicz, K.; Hoffman, M.; Sibera, D.; et al. "Recycled brick aggregates in one-part alkali-activated materials: Impact on 3D printing performance and material properties". Developments in the Built Environment 16 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85173630962&partnerID=MN8TOARS.
    10.1016/j.dibe.2023.100248
  14. Ren, Q.; Pacheco, J.; de Brito, J.. "Calibration of wall effects in mesostructure modelling of concrete using marker-controlled watershed segmentation". Construction and Building Materials 398 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85165955737&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2023.132505
  15. Ren, Q.; Pacheco, J.; de Brito, J.. "Methods for the modelling of concrete mesostructures: a critical review". Construction and Building Materials 408 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85173271149&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2023.133570
  16. Ren, Q.; Pacheco, J.; de Brito, J.. "New generation and separation method for the computational modelling of the mesostructure of concrete". Engineering Fracture Mechanics 284 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85151807546&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2023.109212
  17. Javier Andres Forero Valencia; Miguel Bravo; João Pacheco; de Brito, J; Luis Evangelista. "Thermal Performance of Concrete with Reactive Magnesium Oxide as an Alternative Binder". Sustainability (2022): https://www.mdpi.com/2071-1050/14/10/5885.
    10.3390/su14105885
  18. Albuquerque, António; Pacheco, João; de Brito, Jorge. "Reliability-based recommendations for EN1992 carbonation cover design of concrete with coarse recycled concrete aggregates". Structural Concrete 23 3 (2022): 1873-1889. http://dx.doi.org/10.1002/suco.202100406.
    Publicado • 10.1002/suco.202100406
  19. Arruda, M.R.T.; Pacheco, J.; Castro, L.M.S.; Julio, E.. "A modified Mazars damage model with energy regularization". Engineering Fracture Mechanics 259 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85120790407&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2021.108129
  20. António Albuquerque; João Pacheco; Jorge de Brito. "Eurocode Design of Recycled Aggregate Concrete for Chloride Environments: Stochastic Modeling of Chloride Migration and Reliability-Based Calibration of Cover". Crystals (2021): https://www.mdpi.com/2073-4352/11/3/284.
    10.3390/cryst11030284
  21. Javier Andres Forero Valencia; Miguel Bravo; João Pacheco; de Brito, J; Luis Evangelista. "Fracture Behaviour of Concrete with Reactive Magnesium Oxide as Alternative Binder". Applied Sciences (2021): https://www.mdpi.com/2076-3417/11/7/2891.
    10.3390/app11072891
  22. Pacheco, João. "Structural safety of pultruded FRP profiles for global buckling. Part 1: Approach to material uncertainty, resistance models, and model uncertainties.". Composite Structures (2021): https://www.sciencedirect.com/science/article/abs/pii/S026382232033230X?via%3Dihub.
    10.1016/j.compstruct.2020.113304
  23. Pacheco, João. "Structural safety of pultruded FRP profiles for global buckling. Part 2: Reliability-based evaluation of safety formats and partial factor calibration". Composite Structures (2021): https://www.sciencedirect.com/science/article/abs/pii/S0263822320330737.
    10.1016/j.compstruct.2020.113147
  24. Pacheco, J.; de Brito, J.; Chastre, C.; Evangelista, L.. "Eurocode shear design of coarse recycled aggregate concrete: Reliability analysis and partial factor calibration". Materials 14 15 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85111577586&partnerID=MN8TOARS.
    10.3390/ma14154081
  25. Dias, A.B.; Pacheco, J.N.; Silvestre, J.D.; Martins, I.M.; de Brito, J.. "Environmental and economic life cycle assessment of recycled coarse aggregates: A Portuguese case study". Materials 14 18 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85115643855&partnerID=MN8TOARS.
    10.3390/ma14185452
  26. Pacheco, J.N.; de Brito, J.; Chastre, C.; Evangelista, L.. "Bond of recycled coarse aggregate concrete: Model uncertainty and reliability-based calibration of design equations". Engineering Structures 239 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85104101702&partnerID=MN8TOARS.
    10.1016/j.engstruct.2021.112290
  27. Pacheco, J.; de Brito, J.. "Recycled aggregates produced from construction and demolition waste for structural concrete: Constituents, properties and production". Materials 14 19 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85116165254&partnerID=MN8TOARS.
    10.3390/ma14195748
  28. Pacheco, João. "Uncertainty of shear resistance models: Influence of recycled concrete aggregate on beams with and without shear reinforcement". Engineering Structures (2020): http://dx.doi.org/10.1016/j.engstruct.2019.109905.
    10.1016/j.engstruct.2019.109905
  29. Pacheco, João. "Mechanical and Durability Properties of Concrete with Coarse Recycled Aggregate Produced with Electric Arc Furnace Slag Concrete". Applied Sciences (2019): http://dx.doi.org/10.3390/app10010216.
    10.3390/app10010216
  30. Pacheco, João. "Statistical analysis of Portuguese ready-mixed concrete production". Construction and Building Materials (2019): http://dx.doi.org/10.1016/j.conbuildmat.2019.03.089.
    10.1016/j.conbuildmat.2019.03.089
  31. João Pacheco; Jorge de Brito; Carlos Chastre; Luís Evangelista. "Probabilistic Conversion of the Compressive Strength of Cubes to Cylinders of Natural and Recycled Aggregate Concrete Specimens". Materials (2019): http://www.mdpi.com/1996-1944/12/2/280.
    10.3390/ma12020280
  32. Pacheco, J.; De Brito, J.; Chastre, C.; Evangelista, L.. "Uncertainty Models of Reinforced Concrete Beams in Bending: Code Comparison and Recycled Aggregate Incorporation". Journal of Structural Engineering (United States) 145 4 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85060853237&partnerID=MN8TOARS.
    10.1061/(ASCE)ST.1943-541X.0002296
  33. Pacheco, J.; de Brito, J.; Chastre, C.; Evangelista, L.. "Experimental investigation on the variability of the main mechanical properties of concrete produced with coarse recycled concrete aggregates". Construction and Building Materials 201 (2019): 110-120. http://www.scopus.com/inward/record.url?eid=2-s2.0-85059331798&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2018.12.200
  34. Pacheco, J.; De Brito, J.; Chastre, C.; Evangelista, L.; Pacheco, João. "Scatter of constitutive models of the mechanical properties of concrete: Comparison of major international codes". Journal of Advanced Concrete Technology 17 3 (2019): 102-125. http://www.scopus.com/inward/record.url?eid=2-s2.0-85064277153&partnerID=MN8TOARS.
    10.3151/jact.17.3.102
  35. Bravo, M.; de Brito, J.; Evangelista, L.; Pacheco, J.. "Durability and shrinkage of concrete with CDW as recycled aggregates: Benefits from superplasticizer's incorporation and influence of CDW composition". Construction and Building Materials 168 (2018): 818-830. http://www.scopus.com/inward/record.url?eid=2-s2.0-85042696516&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2018.02.176
  36. Bravo, M.; de Brito, J.; Evangelista, L.; Pacheco, J.. "Superplasticizer's efficiency on the mechanical properties of recycled aggregates concrete: Influence of recycled aggregates composition and incorporation ratio". Construction and Building Materials 153 (2017): 129-138. http://www.scopus.com/inward/record.url?eid=2-s2.0-85024502401&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2017.07.103
  37. Pacheco, J.; de Brito, J.; Ferreira, J.; Soares, D.. "Dynamic characterization of full-scale structures made with recycled coarse aggregates". Journal of Cleaner Production 142 (2017): 4195-4205. http://www.scopus.com/inward/record.url?eid=2-s2.0-84940094610&partnerID=MN8TOARS.
    10.1016/j.jclepro.2015.08.045
  38. De Brito, J.; Ferreira, J.; Pacheco, J.; Soares, D.; Guerreiro, M.. "Structural, material, mechanical and durability properties and behaviour of recycled aggregates concrete". Journal of Building Engineering 6 (2016): 1-16. http://www.scopus.com/inward/record.url?eid=2-s2.0-84957883371&partnerID=MN8TOARS.
    10.1016/j.jobe.2016.02.003
  39. Soares, D.; De Brito, J.; Ferreira, J.; Pacheco, J.. "Erratum: In situ materials characterization of full-scale recycled aggregates concrete structures(Construction and Building Materials (2014) 71 (237-245)". Construction and Building Materials 100 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84949626924&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2015.09.032
  40. Pacheco, J.; De Brito, J.; Ferreira, J.; Soares, D.. "Flexural load tests of full-scale recycled aggregates concrete structures". Construction and Building Materials 101 (2015): 65-71. http://www.scopus.com/inward/record.url?eid=2-s2.0-84945184740&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2015.10.023
  41. Soares, D.; De Brito, J.; Ferreira, J.; Pacheco, J.. "Erratum: Use of coarse recycled aggregates from precast concrete rejects: Mechanical and durability performance(Construction and Building Materials (2014) 71 (263-272))". Construction and Building Materials 100 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84949564677&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2015.09.031
  42. Pacheco, J.; De Brito, J.; Ferreira, J.; Soares, D.. "Destructive horizontal load tests of full-scale recycled- aggregate concrete structures". ACI Structural Journal 112 6 (2015): 815-826. http://www.scopus.com/inward/record.url?eid=2-s2.0-84945224736&partnerID=MN8TOARS.
    10.14359/51687800
  43. Soares, D.; De Brito, J.; Ferreira, J.; Pacheco, J.. "In situ materials characterization of full-scale recycled aggregates concrete structures". Construction and Building Materials 71 (2014): 237-245. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922276661&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2014.08.025
  44. Soares, D.; De Brito, J.; Ferreira, J.; Pacheco, J.. "Use of coarse recycled aggregates from precast concrete rejects: Mechanical and durability performance". Construction and Building Materials 71 (2014): 263-272. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907218904&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2014.08.034
Capítulo de livro
  1. João N. Pacheco; Jorge de Brito. "Design Guidelines for Recycled Aggregate Concrete Based on Reliability Analysis". 2024.
    10.2749/sed020.ch09
  2. Pacheco, João; de Brito, Jorge; Chastre, Carlos; Evangelista, Luís. "Recycled concrete for structural applications". In Recycled Concrete, 195-231. Elsevier, 2023.
    10.1016/b978-0-323-85210-4.00011-4
  3. Pacheco, J.; De Brito, J.; Pacheco, João; de Brito, Jorge. "Structural reliability of recycled aggregate concrete". In New Trends in Eco-efficient and Recycled Concrete, 541-572. Reino Unido: Elsevier, 2018.
    Publicado • 10.1016/b978-0-08-102480-5.00020-8
  4. Pacheco, João; de Brito, Jorge; Chastre, Carlos; Evangelista, Luís. "Reliability analysis: the next step towards recycled aggregates concrete affirmation". In Construction projects: improvement strategies, quality management and potential challenges, 1-54. Nova Iorque, Estados Unidos: Nova Science Publishers, 2017.
    Publicado
Poster em conferência
  1. Pacheco, João; de Brito, Jorge; Chastre, Carlos (141B-6C7F-5164). "From 150 mm cubic to ¿150 mm x 300 mm cylindrical compressive strength of coarse recycled aggregate concrete specimens". Trabalho apresentado em ICG2019 - International Conference on Green Construction, 2019.
Tese / Dissertação
  1. Pacheco, João. "Reliability analysis of ecoconcrete". Doutoramento, 2020.
  2. Pacheco, João. "Desempenho de estruturas executadas em betão com agregados grossos reciclados provenientes da indústria de pré-fabricação". Mestrado, Universidade de Lisboa Instituto Superior Técnico, 2014.
Atividades

Orientação

Título / Tema
Papel desempenhado 		Curso (Tipo)
Instituição / Organização
2024/09/01 - Atual Bond behaviour between GFRP rebars and RAC under monotonic and cyclic loads through beam-end tests
Coorientador
 PhD in Civil Engineering (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/09 - 2027 Strengthening of reinforced concrete columns by partial RC jacketing
Orientador
 PhD in Civil Engineering (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/02 - 2024/08 Structural applications of 3D printed concrete
Orientador
 MSc in Civil Engineering (Mestrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/04 - 2023/12 Structural behaviour of 3D printed concrete walls
Coorientador
 Civil Engineering (Mestrado)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2019/09 - 2023/08 Finite Element Modelling of the Mechanical Behaviour of Recycled Aggregate Concrete at the Mesoscale
Coorientador
 Engenharia Civil (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019 - 2020/09/01 Variability and reliability of the durability properties of coarse recycled aggregate concrete (Variabilidade e fiabilidade das propriedades de durabilidade de betão com incorporação de agregados grossos reciclados de betão)
Coorientador
 Engenharia Civil (Mestrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação) 		Instituição / Organização
2020 - 2021/06 Organizing Committee of the fib Symposium in Lisbon (2021/06/13 - 2021/06/16)
Conferência (Membro da Comissão Organizadora)
 GPBE - Grupo Português de Betão Estrutural, Portugal

Participação em evento

Descrição da atividade
Tipo de evento 		Nome do evento
Instituição / Organização
2021 - 2021 Co-chair of Session 1A: Innovation in materials and structures of the fib International PhD Symposium 2021 in Paris, 21-22 July 2021
Conferência
 fib International PhD Symposium 2021
Féderation Internationale du Béton, Suiça
2020 - 2020 Co-chair of Session 1A: Innovation in materials and structures of the fib International PhD Symposium 2020 in Paris, 26-28 August 2020
Conferência
 fib International PhD Symposium 2020
Féderation Internationale du Béton, Suiça

Arbitragem científica em conferência

Nome da conferência Local da conferência
2023/06/29 - 2023/07/01 fib International Symposium on Conceptual Design of Concrete Structures Oslo 2023 TEKNA
2021 - 2022/09 fib PhD Symposium in Rome 2022 fib; Collegio dei Tecnici della Industrializzazione Edilizia

Membro de associação

Nome da associação Tipo de participação
2018 - Atual fib - Federation Internationale du Béton member
2018 - Atual GPBE - Grupo Português de Betão Estrutural member

Membro de comissão

Descrição da atividade
Tipo de participação 		Instituição / Organização
2025/02/01 - Atual IPQ/CT115/SC2 - member of national standardization committee for EN1992-1
Membro
 Instituto Português da Qualidade, Portugal
2024/09 - Atual Organizing Committee of the 7th fib Congress 2026 in Lisbon
Membro
 GPBE - Grupo Português de Betão Estrutural, Portugal
2024/09 - Atual 7th fib Congress 2026 in Lisbon Conference scientific committee member GPBE - Grupo Português de Betão Estrutural, Portugal
2022 - Atual IPQ/CT 115/GT 04 - Member of the Task Group for Fibre reinforced polymer design of the national committe CT115 (Structural Eurocodes)
Membro
 Instituto Português da Qualidade, Portugal
2020/05 - Atual Member of fib Commission 4: Concrete and Concrete Technology; Task Group 4.7: Structural Applications of Recycled Aggregate Concrete.
Membro
 Féderation Internationale du Béton, Suiça
2024/01 - 2024/10 CLBMCS2024 Conference scientific committee member
Membro
 Universidade de Lisboa Instituto Superior Técnico, Portugal
Distinções

Prémio

2014 GPBE Prémio Jovens Mestres (Best MSC dissertation in Structural Concrete by a Portuguese student)
SECIL, Portugal

GPBE - Grupo Português de Betão Estrutural, Portugal