???global.info.a_carregar???
Renato Natal Jorge. Completed the Título de Agregado in Engenharia Mecânica in 2011/01/11 by Universidade do Porto. Is Full Professor in Universidade do Porto. Published 243 articles in journals. Has 7 section(s) of books and 17 book(s). Organized 8 event(s). Supervised 12 PhD thesis(es) e co-supervised 13. Supervised 7 MSc dissertation(s) e co-supervised 5. Has received 11 awards and/or honors. Participates and/or participated as Principal investigator in 1 project(s). Works in the area(s) of Engineering and Technology with emphasis on Mechanical Engineering with emphasis on Applied Mechanics. In their professional activities interacted with 628 collaborator(s) co-authorship of scientific papers. In his curriculum Ciência Vitae the most frequent terms in the context of scientific, technological and artistic-cultural output are: cancro ; propriedades materiais; análise de imagem; ensaios mecânicos; Implantes mamários; Fenómenos de Fadiga; Mecanocompatibilidade; Biomecânica Mamária; Métodos sem malha; Modelos Constitutivos; Manufactura aditiva; Fabricação por filamento fundido; Simulação do parto; Biomecânica; Modelo específico e orientado ao paciente; Modelos constitutivos; Esfíncter Urinário; Formulação Hiperelástica; Biomecânica dos Tecidos Moles; Male Urinary Incontinence; Estruturas leves; Hidroformagem; Espumas metálicas; Métodos numéricos em processos tecnológicos; Not Apllicable; Dispositivos médicos; Prolapso; Incontinência urinária; Audição; Método dos Elementos Finitos; Reconstrução 3D; Caracterização mecânica de tecidos; Retificação superficial; Simulção numérica; Biomateriais; Ligas de titanio; .
Identificação

Identificação pessoal

Nome completo
Renato Manuel Natal Jorge

Nomes de citação

  • Natal Jorge, Renato

Identificadores de autor

Ciência ID
E41E-9A3C-693D
ORCID iD
0000-0002-7281-579X

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica - Mecânica Aplicada
Formação
Grau Classificação
2011/01/11
Concluído
Engenharia Mecânica (Título de Agregado)
Universidade do Porto, Portugal
Aprovado por unanimidade
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento
Empregador
2018/07/19 - Atual Professor Catedrático (Docente Universitário) Universidade do Porto, Portugal
2008/09/08 - 2018/07/20 Professor Associado (Docente Universitário) Universidade do Porto, Portugal
Projetos

Projeto

Designação Financiadores
2022/01/01 - 2024/12/31 Angiogenesis in silico: from numerical simulation to tissue engineering application
PTDC/EME-APL/3058/2021
Investigador responsável
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Em curso
2021/03/01 - 2024/02/29 Efeitos de cargas cíclicas em células cancerígenas da bexiga
PTDC/EME-APL/1342/2020
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Instituto Português de Oncologia do Porto Francisco Gentil EPE, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2018/10/01 - 2021/09/30 Melhoramento Mecânico dos Implantes Mamários
PTDC/EME-APL/29875/2017
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2018/06/01 - 2021/05/31 Uma abordagem biomecânica para melhorar o parto
PTDC/EME-EME/30062/2017
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal

Universidade do Porto, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2018/09/03 - 2020/03/02 Desenvolvimento de novas ferramentas numéricas e novos modelos constitutivos para simular o processo de impressão 3D por filamento fundido
MIT-EXPL/ISF/0084/2017
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Instituto de Engenharia Mecânica, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2016/07/01 - 2019/12/31 UROSPHINX - Fisiologia e mecânica do esfíncter urinário masculino
PTDC/BIM-MEC/4507/2014
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal

Universidade do Porto Faculdade de Medicina, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2010/01/01 - 2013/06/30 Estudo de Estruturas Sandwich Hidroformadas e constituidas por espumas metálicas
PTDC/EME-TME/098050/2008
Instituto de Engenharia Mecânica, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2007/07/01 - 2010/12/31 Estudo biomecânico do ouvido médio para a reabilitação auditiva
PTDC/EME-PME/81229/2006
Instituto de Engenharia Mecânica, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2007/07/01 - 2010/12/31 Rectificação de Novos Materiais
PTDC/EME-TME/81239/2006
Instituto de Engenharia Mecânica, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2007/07/01 - 2010/09/30 BIOPELVIC - Estudo biomecânico das disfunções do pavimento pélvico da mulher
PTDC/SAU-BEB/71459/2006
Instituto de Engenharia Mecânica, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Instituto de Engenharia de Sistemas e Computadores, Portugal

Universidade do Porto Faculdade de Medicina, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2007/11/01 - 2008/12/31 European Rail Research Network of Excellence EURNEX
POCI/V.5/C0006/2005
Instituto de Engenharia Mecânica, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2007/01/01 - 2008/12/31 Advanced Passive Safety Network
POCI/V.5/C0005/2005
Instituto de Engenharia Mecânica, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
Produções

Publicações

Artigo em conferência
  1. Soares, C; Cortez, A; Sampaio, M; Gobbo, P; Natal, R; Mendes, J. "Dental implant Retentive Force Analysis". 2021.
    10.1109/gmepe/pahce50215.2021.9434841
  2. Moutinho, MBF; Belinha, J; Natal Jorge, RM. "Using the finite element method and radial point interpolation method to analyze the jaw bone". 2019.
    10.1109/enbeng.2019.8692537
  3. Albuquerque, TM; Belinha, J; Natal Jorge, RM. "Analysing the peripheral nerve tissue using distinct discretization techniques". 2019.
    10.1109/enbeng.2019.8692542
  4. Costa, DC; Belinha, J; Natal Jorge, RM. "Biomechanical simulation of a dental implant using finite element method analysis". 2019.
    10.1109/enbeng.2019.8692548
  5. Athayde Malafaya, B; Marques, MC; Ferreira, IA; Machado, MMF; Caldas, GAR; Belinha, J; Alves, FJL; Natal Jorge, RM. "Additive manufacturing from a biomedical perspective". 2019.
    10.1109/enbeng.2019.8692538
  6. Castro, ATA; Belinha, J; Fonseca, EMM; Oliveira, VCC; Oliveira, AF; Natal Jorge, RM. "Using meshless methods to predict in-silico the stress distribution around bone sarcoma". 2019.
    10.1201/9780429265297-39
  7. Gomes, JMS; Belinha, J; Natal Jorge, RM. "Application of chitosan in dentistry—a review". 2019.
    10.1201/9780429265297-27
  8. Fonseca, EMM; Piloto, JF; Fernandes, MG; Natal Jorge, RM. "Computational analysis for stress intensity factor (KI) measuring in metal-ceramic interface". 2019.
    10.1201/9780429265297-4
  9. Peyroteo, MMA; Belinha, J; Dinis, LMJS; Natal Jorge, RM. "Predicting the trabecular architecture in the vicinity of natural teeth: A comparison between finite elements and meshless methods". 2019.
    10.1201/9780429265297-33
  10. Caldas, GAR; Belinha, J; Natal Jorge, RM. "Predicting in-silico structural response of dental restorations using meshless methods". 2019.
    10.1201/9780429265297-37
  11. Peyroteo, MMA; Belinha, J; Dinis, LMJS; Natal Jorge, RM. "Bone remodeling mathematical models using advanced discretization techniques: A review". 2019.
    10.1201/9780429265297-32
  12. Caldas, GAR; Belinha, J; Natal Jorge, RM. "Numerical analysis of support structures on an adhesive dental bridge". 2019.
    10.1201/9780429265297-36
  13. Deliu, EG; Belinha, J; Natal Jorge, RM. "The structural analysis of a molar tooth using finite element method". 2019.
    10.1109/enbeng.2019.8692508
  14. Veiga, ACS; Belinha, J; Natal Jorge, RMN. "BIOMECHANICAL SIMULATION OF HUMAN CHROMOSOMES". 2019.
    10.1109/enbeng.2019.8692464
  15. Sousa, RCSC; Belinha, J; Oliveira, VCC; Oliveira, AF; Jorge, RMN. "The structural analysis of a femur bone using a 2D FEM approach". 2019.
    10.1109/enbeng.2019.8692481
  16. Gomes, J; Belinha, J; Jorge, RN. "Numerical analysis of chitosan nerve guidance channels with different geometries". 2019.
    10.1109/enbeng.2019.8692476
  17. Silva, JL; Belinha, J; Neves, JMPR; Vilaca, IRSBS; Natal Jorge, RMN. "Numerical simulation of aneurysms with Finite Element and Meshless Methods". 2019.
    10.1109/enbeng.2019.8692459
  18. Barbosa, MIA; Belinha, J; Jorge, RMN. "USING MESHLESS METHODS TO SIMULATE BLOOD CLOTS". 2019.
    10.1109/enbeng.2019.8692499
  19. Coelho, CCC; Belinha, J; Jorge, RMN. "Computational structural analysis of dental implants using radial point interpolation meshless methods". 2019.
    10.1201/9780429265297-44
  20. Castro, ATA; Peyroteo, MMA; Belinha, J; Jorge, RMN. "Using meshless methods to analyse bone remodelling after the insertion of a femoral implant". 2019.
    10.1201/9780429265297-38
  21. Marques, M; Belinha, J; Jorge, RMN; Oliveira, AF. "A homogenization multiscale procedure for trabecular bone tissue using meshless methods". 2019.
    10.1201/9780429265297-31
  22. Gomes, HIG; Belinha, J; Jorge, RMN. "Studying the mandible bone tissue remodelling in the vicinity of implants using a meshless method computational framework". 2019.
    10.1201/9780429265297-43
  23. Barbosa, MIA; Belinha, J; Jorge, RMN. "The influence of a blood clot in hemodynamics: A meshless method study". 2019.
    10.1201/9780429265297-47
  24. Ferreira, SD; Belinha, J; Jorge, RMN. "Using meshless methods to predict the biomechanical behaviour of red blood cells". 2019.
    10.1201/9780429265297-40
  25. Guerra, AC; Belinha, J; Jorge, RMN. "Wound healing angiogenesis: An overview on mathematical models". 2019.
    10.1201/9780429265297-46
  26. Santos, CF; Parente, M; Belinha, J; Jorge, RMN; Gentil, F. "Computational simulation of the vestibular system using a meshless particle method". 2019.
    10.1201/9780429265297-28
  27. Santos, CF; Parente, M; Belinha, J; Jorge, RMN; Gentil, F. "Using meshless methods to simulate the free vibrations of the cupula under pathological conditions". 2019.
    10.1201/9780429265297-29
  28. Pina, D; Mendes, JG; Natal Jorge, RM. "Motion Capture and MultiBody Simulations to Determine Actuation Requirements for an Assistive Exoskeleton". 2019.
  29. Gentil, F; Campos, JCR; Parente, M; Santos, CF; Areias, B; Jorge, RMN. "Facial nerve-a clinical and anatomical review". 2019.
    10.1201/9780429265297-21
  30. Gentil, F; Campos, JCR; Parente, M; Santos, CF; Areias, B; Jorge, RMN. "Trigeminal nerve - interdisciplinarity between the areas of dentistry and audiology". 2019.
    10.1201/9780429265297-20
  31. Caetano, SC; Sousa, LC; Parente, M; Natal, R; Sousa, H; Goncalves, JM. "LATERAL LUMBAR FUSION, A MINIMALLY INVASIVE SURGICAL APPROACH FOR LUMBAR INTERBODY FUSION". 2018.
  32. Natal Jorge, RM; Campos, JCR; Vaz, MAP; Santos, SM; Tavares, JMRS. "Preface". 2018.
    10.2174/9781608051564113010003
  33. Fernandes, MGA; Natal, R; Fonseca, EMM; Ribeiro, JEPC; Azevedo, L. "Effect of drill speed on bone damage during drilling". 2018.
    10.1201/9781315164892-27
  34. Marques, M.; Belinha, J.; Natal, R.J.. "Meshless analysis of 2D trabecular patches using a fabric tensor obtained from Micro-CT images". 2017.
    10.1109/ENBENG.2017.7889439
  35. Peyroteo, M.; Belinha, J.; Vinga, S.; Dinis, L.; Natal Jorge, R.. "A model for bone remodeling: Cellular dynamics and mechanical loading". 2017.
    10.1109/ENBENG.2017.7889454
  36. Maia Dos Santos, C.I.R.A.; Belinha, J.; Dinis, L.M.J.S.; Natal Jorge, R.. "The computational simulation of cellular growth". 2017.
    10.1109/ENBENG.2017.7889438
  37. Areias, B.; Parente, M.; Gentil, F.; Santos, C.; Natal Jorge, R.. "A numerical study of the human ear". 2017.
    10.1109/ENBENG.2017.7889442
  38. Belinha, J.; Dinis, L.M.J.S.; Natal Jorge, R.. "Structural computational biomechanics with advanced discretization techniques". 2017.
    10.1109/ENBENG.2017.7889484
  39. Silva, E; Parente, M; Jorge, RN; Mascarenhas, T. "Characterization of the biomechanical properties of the pubovisceralis muscle of two women - One with pelvic organ prolapse and other without pathology". 2017.
    10.1109/enbeng.2017.7889465
  40. Gomes, J; Belinha, J; Dinis, L; Jorge, RN. "The structural analysis of chitosan tubes using meshless methods". 2017.
    10.1109/enbeng.2017.7889434
  41. Santos, CF; Belinha, J; Gentil, F; Parente, M; Areias, B; Jorge, RN. "Biomechanical study of the vestibular system of the inner ear using a numerical method". 2017.
    10.1016/j.piutam.2017.08.040
  42. Teixeira, TAS; Fernandes, MG; Azevedo, LD; Fonseca, EMM; Jorge, RN. "INFLUENCE OF DRILL BIT DIAMETER ON DRILLING OF POLYURETHANE FOAMS". 2017.
  43. Santos, CF; Belinha, J; Gentil, F; Parente, M; Areias, B; Jorge, RN. "The free vibration computational analysis of the cupula in the inner ear". 2017.
    10.1109/enbeng.2017.7889461
  44. Pinto, S; Santos, PMD; Costa, P; Jansen, P; Costa, D; Paiva, A; Parente, MPL; Jorge, RMN. "Application of virtual reality techniques to a birth simulation". 2017.
    10.1109/expat.2017.7984344
  45. Tavares, J.M.R.S.; Natal Jorge, R.M.. "Preface". 2016.
  46. Fernandes, MG; Fonseca, EM; Jorge, RN. "INFLUENCE OF BONE DRILLING PARAMETERS ON THE THERMAL STRESS DISTRIBUTION". 2016.
  47. Ferreira, JP; Parente, M; Jorge, R. "MODELLING OF ANISOTROPIC HYPERELASTIC MATERIALS WITH DAMAGE". 2016.
  48. Rocha, P.; Parente, M.; Mascarenhas, T.; Fernandes, A.; Jorge, R.N.. "Effect of surgical mesh implant in the uterine prolapse correction". 2015.
    10.1109/ENBENG.2015.7088848
  49. Tavares, C.; Belinha, J.; Dinis, L.; Jorge, R.N.. "The numerical analysis of a restored tooth using meshless methods". 2015.
    10.1109/ENBENG.2015.7088872
  50. Belinha, J.; Dinis, L.; Jorge, R.N.. "An elasto-plastic model to analyse the biomechanical behaviour of the atherosclerotic plaque tissue". 2015.
    10.1109/ENBENG.2015.7088875
  51. Martins, R.; Martins, P.; Mascarenhas, T.; Jorge, R.N.. "Evaluation of material model parameters of vaginal tissue with different fiber orientation". 2015.
    10.1109/ENBENG.2015.7088847
  52. Belinha, J.; Dinis, L.; Jorge, R.N.. "The osteointegration numerical prediction of a femur stem using a meshless approach". 2015.
    10.1109/ENBENG.2015.7088882
  53. Jorge, R.M.N.; Belinha, J.; Martins, P.A.L.S.; Parente, M.P.L.; Leite-Moreira, A.; Tavares, J.M.R.S.. "Preface". 2015.
    10.1109/ENBENG.2015.7088800
  54. Silva, M.P.E.; Jorge, R.N.; Mascarenhas, T.. "Using an inverse method for optimizing the material constants of the Mooney-Rivlin constitutive model". 2015.
    10.1109/ENBENG.2015.7088862
  55. Oliveira, D.; Parente, M.; Jorge, R.N.; Calvo, B.; Mascarenhas, T.. "A structural damage model for pelvic floor muscles". 2015.
    10.1109/ENBENG.2015.7088865
  56. Masteling, M.; Mascarenhas, T.; Natal, R.. "Urinary incontinence in musicians: A preliminary study". 2015.
    10.1109/ENBENG.2015.7088838
  57. Santos, C.F.; Parente, M.; Belinha, J.; Jorge, R.N.; Gentil, F.. "Numerical simulation of the maneuvers performed in vestibular rehabilitation". 2015.
    10.1109/ENBENG.2015.7088879
  58. Da Roza, T.; Jorge, R.N.; Da Roze, T.; Duarte, J.A.; Brandao, S.; Mascarenhas, T.; Ramos, I.. "Relationship between area and moment of inertia with pubovisceral muscle displacement by biomechanical models". 2015.
    10.1109/ENBENG.2015.7088845
  59. Fernandes, M.G.; Natal, R.; Fonseca, E.M.M.. "Analysis of stresses in drilled composite materials". 2015.
    10.1109/ENBENG.2015.7088834
  60. Belinha, J.; Dinis, L.M.J.S.; Natal Jorge, R.M.. "The meshless methods in the bone tissue remodelling analysis". 2015.
    10.1016/j.proeng.2015.07.009
  61. Ferreira, J.; Parente, M.; Natal, R.. "Fibre reinforcement in living cells: A preliminary study of the f-actin filaments". 2015.
    10.1016/j.proeng.2015.07.002
  62. Tavares, C.S.S.; Belinha, J.; Dinis, L.M.J.S.; Natal Jorge, R.M.. "The elasto-plastic response of the bone tissue due to the insertion of dental implants". 2015.
    10.1016/j.proeng.2015.07.007
  63. Belinha, J; Dinis, L; Jorge, RN. "THE NON-LINEAR NUMERICAL ANALYSIS USING MESHLESS METHODS". 2015.
  64. Belinha, J; Dinis, L; Jorge, RN. "THE NONLINEAR ANALYSIS OF PLATES USING THE NATURAL NEIGHBOUR RADIAL POINT INTERPOLATION METHOD". 2015.
  65. Arroyave G, AI; Lima, RG; Martins, PALS; Ramiao, N; Jorge, RMN. "Methodology for Mechanical Characterization of Soft Biological Tissues: arteries". 2015.
    10.1016/j.proeng.2015.07.012
  66. Pina, DS; Fernandes, AA; Jorge, RN; Mendes, JG. "Development of a Portable System for Online EMG Monitoring". 2015.
    10.1109/expat.2015.7463206
  67. Areias, B; Parente, MPL; Gentil, F; Natal Jorge, RMN; Fernandes, AA. "Biomechanical simulation of the human ear". 2015.
    10.1109/enbeng.2015.7088813
  68. Martins, P; Roque, C; Jorge, R. "USING EVOLUTIONARY OPTIMIZATION TO DETERMINE THE MECHANICAL PROPERTIES OF BIOMATERIALS". 2015.
  69. Fernandes, M; Fonseca, E; Natal, R; Vaz, M; Dias, MI. "COMPOSITE MATERIALS AND BOVINE CORTICAL BONE DRILLING: THERMAL EXPERIMENTAL ANALYSIS". 2015.
  70. Ferreira, J; Parente, M; Jorge, RN. "STEM CELLS MECHANICS ON REGENERATIVE PROCEDURES: A PRELIMINARY COMPUTATIONAL STUDY OF THE ACTIN NETWORK ACTIVE BEHAVIOR". 2015.
  71. Pina, DS; Fernandes, AA; Natal Jorge, RM; Mendes, JG. "Development of a portable system for online EMG monitoring". 2015.
  72. Belinha, J.; Dinis, L.M.J.S.; Natal Jorge, R.M.. "The bone tissue remodelling analysis in dentistry using a meshless method". 2014.
    10.1201/b17071-40
  73. Porto, C.P.S.; Parente, M.; Jorge, R.M.N.; Pereira, L.C.; Griza, S.. "Fracture toughness in interface systems Ni-Cr/ceramic, alumina/ceramic and zirconia/ceramic". 2014.
  74. Tavares, C.S.S.; Belinha, J.; Dinis, L.M.J.S.; NatalJorge, R.M.. "Numerical analysis of a teeth restoration: A meshless method approach". 2014.
    10.1201/b17071-39
  75. Braga, I.; Rocha, D.; Utsch, R.; Las Casas, E.; Andrade, R.; Braga, R.; Natal Jorge, R.M.; Martins, P.A.L.S.. "3D Finite Element biomechanical model of the mandible-mucosaexpander apparatus set". 2014.
  76. Belinha, J.; Dinis, L.M.J.S.; Jorge, R.M.N.. "Mandible bone tissue remodelling analysis using a new numerical approach". 2014.
  77. Andrade, J.R.; Belinha, J.; Dinis, L.M.J.S.; Jorge, R.M.N.. "Analysis of dental implant using a meshless method". 2014.
  78. Duarte, H.M.S.; Belinha, J.; Dinis, L.M.J.S.; Jorge, R.M.N.. "Analysis of a bar-implant using a meshless method". 2014.
    10.1201/b15986-30
  79. Moreira, S.F.; Belinha, J.; Dinis, L.M.J.S.; Jorge, R.M.N.. "A meshless method analysis of maxillary central incisor". 2014.
    10.1201/b15986-33
  80. Jorge, R.M.N.; Campos, J.C.R.; Tavares, J.M.R.S.; Vaz, M.A.P.; Santos, S.M.. "Preface". 2014.
  81. Natal Jorge, R.M.; Reis Campos, J.C.; Vaz, M.A.P.; Santos, S.M.; Tavares, J.M.R.S.. "Preface". 2014.
  82. Tavares, J.M.R.S.; Natal Jorge, R.M.. "Preface". 2014.
  83. Brandão, S.; Mascarenhas, T.; Ramos, I.; Parente, M.; Roza, T.; Jorge, R.N.; Ferreira, H.. "Distribution of the pelvic floor muscle fibers: Comparison between magnetic resonance tractography and finite element method representation". 2014.
  84. Belinha, J; Dinis, LMJS; Natal Jorge, RMN. "The bone tissue remodelling analysis in dentistry using a meshless method". 2014.
  85. Belinha, J; Dinis, LMJS; Natal Jorge, RMN. "Mandible bone tissue remodelling analysis using a new numerical approach". 2014.
    10.1201/b15986-32
  86. Rafael Andrade, JR; Belinha, J; Dinis, LMJS; Natal Jorge, RMN. "Analysis of dental implant using a meshless method". 2014.
    10.1201/b15986-31
  87. Berdich, K.-N.; Faur, N.; Gentil, F.; Parente, M.; Jorge-Natal, R.. "Biomechanical study of myringotomy through simple incision and drainage tube insertion". 2013.
    10.1109/EHB.2013.6707387
  88. Bogdan, L.; Faur, N.; Jorge Natal, R.; Parente, M.; Patrascu, J.M.. "Nitinol artificial anterior cruciate ligament: A finite element study". 2013.
    10.1109/EHB.2013.6707329
  89. Rynkevic, R.; Martins, P.; Parente, M.; Natal, R.; Barroso, M.; Santos, D.. "Implant shape influence on the mechanical behavior of breast implants". 2013.
    10.1109/ENBENG.2013.6518409
  90. Da Silva, M.E.T.; Parente, M.P.L.; Jorge, R.M.N.. "Biomechanical study of a fetus during a vaginal delivery". 2013.
    10.1109/ENBENG.2013.6518431
  91. Bogdan, L; Faur, N; Natal, RJ; Parente, M; Patrascu, JM. "Nitinol Artificial Anterior Cruciate Ligament: A Finite Element Study". 2013.
    10.1109/EHB.2013.6707329
  92. Di Giamberardino, P.; Iacoviello, D.; Jorge, R.M.N.; Tavares, J.M.R.S.. "Preface". 2012.
  93. Pina, D.; Fernandes, A.A.; Mendes, J.G.; Jorge, R.N.. "A technological and statistical state-of-the-art study regarding active motion-oriented assistive devices". 2012.
    10.5220/0003795702450250
  94. Gentil, F.; Carolina, G.; Marco, P.; Pedro, M.; Renato, N.J.; João, P.. "Stapes replacement-different ways to replace its function". 2012.
  95. Zhen, M.; Jorge, R.N.; Tavares, J.M.R.S.. "A comparison between segmentation algorithms for urinary bladder on T2-weighted MR images". 2012.
  96. Talaia, P.; Parente, M.; Fernandes, A.; Natal Jorge, R.. "3D geometry reconstruction from gray and RGB medical images". 2012.
  97. Tavares, J.M.R.S.; Natal Jorge, R.M.. "Preface". 2012.
  98. Da Roza, T.H.; Natal Jorge, R.; Parente, M.; Mascarenhas, T.; Loureiro, J.; Duarte, S.. "Reaction force produced in the coccyx in different degrees of prolapse". 2012.
  99. Garbe, C.; Parente, M.; Martins, P.; Natal Jorge, R.; Gentil, F.; Paço, J.. "Stress analysis of the tympanic membrane through image". 2012.
  100. Belinha, J.; Dinis, L.M.J.S.; Natal Jorge, R.M.. "The analysis of thick plates considering a new meshless method". 2012.
  101. Mata, H.; Natal Jorge, R.; Santos, A.D.; Parente, M.P.L.; Valente, R.A.F.; Fernandes, A.A.. "Numerical and experimental study of the bulge test of sandwich shells with metal foam cores". 2012.
  102. Belinha, J.; Dinis, L.M.J.S.; Natal Jorge, R.M.. "A new meshless method applied to the analysis of 3D structures". 2012.
  103. Mata, H.; Natal Jorge, R.; Parente, M.P.L.; Fernandes, A.A.; Santos, A.D.; Valente, R.A.F.; Xavier, J.. "Establishment of the mechanical properties of aluminium alloy of sandwich plates with metal foam core by using an image correlation procedure". 2012.
  104. Ma, Z; Jorge, RN; Tavares, JMRS. "A comparison between segmentation algorithms for urinary bladder on T2-weighted MR images". 2012.
  105. Souto, L; Talaia, P; Ramos, A; Martins, P; Silva, N; Drummond, M; Jorge, RN. "FEM ANALYSIS OF A FACE VENTED MASK INTERFACE BASED ON ONE IN-VITRO MODEL". 2012.
  106. Garbe, C; Gentil, F; Parente, M; Martins, P; Jorge, RN. "STUDY OF THE EFFECT OF DIFFERENT EARDRUM THROUGH THE ANALYSIS OF STAPEDIUS MUSCLE STRAIN". 2012.
  107. Gentil, F; Garbe, C; Parente, M; Martins, P; Jorge, RN. "OTOSCLEROSIS AND ITS CORRECTION". 2012.
  108. Talaia, P; Souto, L; Silva, N; Drummond, M; Jorge, RN. "EXPERIMENTAL AND NUMERICAL ANALYSIS OF CONTACT PRESSURE OF HOUSE MECHANICAL VENTILATION SYSTEMS". 2012.
  109. Talaia, P; Ramos, A; Souto, L; Martins, P; Relvas, C; Simoes, JAO; Silva, N; Drummond, M; Jorge, RN. "USE OF REVERSE ENGINEERING TOOLS TO CREATE A TEST-BED FOR EVALUATION OF HOUSE MECHANICAL VENTILATION SYSTEMS". 2012.
  110. Pina, D; Fernandes, AA; Mendes, JG; Natal Jorge, RM. "A Technological and Statistical State-of-the-art Study regarding Active Motion-oriented Assistive Devices". 2012.
  111. Silva, A.; Teixeira, J.; Amorim, P.; Gabriel, J.; Quintas, M.; Natal Jorge, R.M.. "Measuring the pressure in a laryngoscope blade". 2011.
  112. Da Roza, T.H.; Parente, M.P.L.; Natal Jorge, R.M.; Mascarenhas, T.; Loureiro, J.; Duarte, S.. "Analysis of the contraction of the pelvic floor through the finite element method considering different pathologies". 2011.
  113. Voinescu, M.; Soares, D.P.; Castro, M.P.; Marques, A.T.; Natal Jorge, R.M.. "The use of muscle recruitment algorithms to better assess problems for children with gait deficiency". 2011.
  114. Trindade, V.L.A.; Santos, S.; Parente, M.P.L.; Martins, P.; Natal Jorge, R.M.; Santos, A.; Santos, L.; Fernandes, J.. "Mechanical properties of temporalis muscle: A preliminary study". 2011.
  115. Martins, P.A.L.S.; Natal Jorge, R.M.; Silva-Filho, A.L.; Santos, A.; Santos, L.; Mascarenhas, T.; Ferreira, A.J.M.. "Possible relations between female pelvic pathologies and soft tissue properties". 2011.
  116. Gentil, F.; Garbe, C.; Parente, M.; Martins, P.; Natal Jorge, R.M.. "The action of middle ear muscles using the finite element method". 2011.
  117. Mata, H.; Parente, M.P.L.; Fernandes, A.A.; Natal Jorge, R.; Valente, R.; Santos, A.. "Numerical and experimental study of sandwich plates with metallic foam cores". 2011.
  118. Natal Jorge, R.M.; Tavares, J.M.R.S.; Barbosa, M.P.; Slade, A.P.. "Preface". 2011.
  119. Garbe, C.; Gentil, F.; Parente, M.P.L.; Martins, P.; Ferreira, A.J.M.; Natal Jorge, R.M.. "Development of computational model to analyze the influence of fiber direction in the tympanic membrane". 2011.
  120. Martins, PALS; Natal Jorge, RMN; Silva Filho, AL; Santos, A; Santos, L; Mascarenhas, T; Ferreira, AJM. "Possible relations between female pelvic pathologies and soft tissue properties". 2011.
  121. da Roza, TH; Parente, MPL; Natal Jorge, RMN; Mascarenhas, T; Loureiro, J; Duarte, S. "Analysis of the contraction of the pelvic floor through the finite element method considering different pathologies". 2011.
  122. Medeiros, A.P.; Seibel, S.; Jorge, R.N.; Fernandes, A.A.. "Lean thinking and product innovation in the furniture industry". 2010.
    10.1115/DETC2009-86630
  123. Braga, I; Rocha, D; Filgueiras, P; Casas, EL; Andrade, R; Jorge, RN; Martins, PALS. "Biomechanical study of changes in buccal bone structure induced by expansion screw". 2010.
  124. Neves, A.M.A.; Roque, C.M.C.; Ferreira, A.J.M.; Soares, C.M.M.; Jorge, R.M.N.. "Solution time-dependent problems in sandwich beams and plates solved with RBF/PS method". 2009.
  125. Ma, Z.; Tavares, J.M.R.S.; Jorge, R.M.N.. "A review on the current segmentation algorithms for medicalimages". 2009.
  126. Santos, S.; Vieira, A.; Parente, M.L.; Jorge, R.N.. "F.E.M. Thermal study of Gri-Di-G of a titanium alloy". 2009.
  127. Dinis, L.M.J.S.; Natal Jorge, R.M.; Belinha, J.. "The natural neighbour radial point interpolation method: A non-linear analysis review". 2009.
    10.4203/ccp.91.101
  128. da Cunha Roque, CMD; Mendes Ferreira, AJM; Natal Jorge, RMN. "A Meshless Approach for the Analysis of Orthotropic Shells Using a Higher-Order Theory and an Optimization Technique". 2009.
  129. Gentil, F.; Ferreira, A.; Jorge, R.N.; Parente, M.; Martins, P.; Alexandre, F.; Almeida, E.. "Biomechanical analysis of the human middle ear". 2008.
  130. Gonçalves, P.C.T.; Tavares, J.M.R.S.; Jorge, R.M.N.. "Segmentation and simulation of objects in pedobarography images using physical principles". 2008.
  131. Tavares, J.M.R.S.; Jorge, R.M.N.. "Preface". 2008.
  132. Tavares, J.M.R.S.; Jorge, R.M.N.. "Proceedings of VIPIMAGE 2007 - 1st ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing: Preface". 2008.
  133. Gonçalves, P.C.T.; Tavares, J.M.R.S.; Jorge, R.N.. "Segmentation of objects in images using physical principles". 2008.
  134. Alexandre, F.; El Sayed, R.F.; Mascarenhas, T.; Jorge, R.M.N.; Parente, M.P.; Fernandes, A.A.; Tavares, J.M.R.S.. "3D reconstruction of pelvic floor for numerical simulation purpose". 2008.
  135. Martins, P.; Jorge, R.N.; Fernandes, A.; Ferreira, A.; Mascarenhas, T.. "Image processing on the Poisson ratio calculation of soft tissues". 2008.
  136. Valente, R.A.F.; De Sousa, R.J.A.; Jorge, R.M.N.; Cardoso, R.P.R.; Simões, F.; Yoon, J.W.; Grácio, J.. "An overview of sheet metal forming simulations with enhanced assumed strain elements". 2007.
    10.1063/1.2740899
  137. Valente, R.A.F.; Natal Jorge, R.M.; Roque, A.P.; Parente, M.P.L.; Fernandes, A.A.. "Numerical simulation of the hydroforming manufacturing process of dissimilar tailor-welded tubular parts using innovative solid finite elements". 2007.
  138. Pimenta, S.; Tavares, J.M.R.S.; Jorge, R.N.; Alexandre, F.; Mascarenhas, T.; El Sayed, R.F.. "Reconstruction of 3D models from medical images: Application to female pelvic organs". 2007.
  139. Tavares, J.M.R.S.; Jorge, R.M.N.. "Proceedings of the International Symposium CompIMAGE 2006 - Computational Modelling of Objects Represented in Images: Fundamentals, Methods and Applications: Preface". 2007.
  140. Alexandre, F.; Gentil, F.; Milheiro, C.; Martins, P.; Fernandes, A.A.; Jorge, R.N.; Ferreira, A.J.M.; Parente, M.P.L.; Mascarenhas, T.. "3D reconstruction of the middle ear for FEM simulation". 2007.
  141. Martins, P.; Jorge, R.N.; Ferreira, A.. "Tracking the 3D deformation of hexahedric samples, using video information from two perpendicular faces. Application to uniaxial tension tests of hyperelastic materials". 2007.
  142. Jorge, RMN; Parente, MPL; Fernandes, AA. "Fatigue assessment of welded tubular steel structures details by using FEM". 2007.
  143. Jorge, R.M.N.; Fernandas, A.A.; De Castro, P.M.S.T.; Santos, N.E.; Fonseca, R.; Matos, A.C.O.. "Fatigue design of welded tubular steel bridge details". 2006.
  144. Gentil, F; Jorge, RMN; Ferreira, AJM; Parente, MPL; Martins, PALS; Almeida, E. "Biomechanical simulation of middle ear using hyperelastic models". 2006.
    10.1016/s0021-9290(06)84569-0
  145. Aguiar Vieira, A.; Monteiro Baptista, A.; Natal Jorge, R.; Lages Parente, M.P.. "Experimental and FEM study of the influence of the grinding stone on the temperature field during superficial grinding". 2005.
  146. Gentil, F.; Natal Jorge, R.M.; Ferreira, A.J.M.; Parente, M.P.L.; Moreira, M.; Almeida, E.. "Biomechanical study of middle ear". 2005.
  147. Alves De Sousa, R.J.; Cardoso, R.P.R.; Valente, R.A.F.; Yoon, J.-W.; Grácio, J.J.; Natal Jorge, R.M.. "Development of a one-point quadrature EAS solid-shell element for sheet forming". 2005.
    10.1063/1.2011313
  148. Roque, A.P.; Jorge, R.M.N.; Parente, M.P.L.; Valente, R.A.F.; Fernandes, A.A.. "Numerical study of hydroforming with tailor-welded tubular blanks". 2005.
    10.1063/1.2011282
  149. Valente, R.A.F.; Parente, M.P.L.; Jorge, R.M.N.; Cardoso, R.P.R.; Alves De Sousa, R.J.. "Fully integrated EAS-based solid-shell finite elements in implicit sheet metal forming simulations". 2005.
    10.1063/1.2011312
  150. Martins, P.A.L.S.; Natal Jorge, R.M.; Ferreira, A.J.M.. "Determination of material parameters for different hyperelastic models". 2005.
  151. Fontes Valente, R.A.; Parente, M.P.L.; Natal Jorge, R.M.; César De Sá, J.M.A.; Grácio, J.J.. "Formulations for locking treatment in anisotropic large deformation elasto-plastic thin structures". 2005.
  152. Roque, C.M.C.; Ferreira, A.J.M.; Jorge, R.M.N.. "Static deformations and natural frequencies of functionally graded plates using a higher-order theory and a meshless method". 2005.
  153. Roque, A.P.; Natal Jorge, R.M.; Parente, M.P.L.; Fontes Valente, R.A.; Fernandes, A.A.. "Influence of the heat affected zone on hydroforming with tailor-welded tubular blanks". 2005.
  154. de Sousa, RJA; Cardoso, RPR; Valente, RAF; Yoon, JW; Gracio, JJ; Jorge, RMN. "Development of a one-point quadrature EAS solid-shell element for sheet forming". 2005.
  155. Valente, RAF; de Sousa, RJA; Parente, M; Jorge, RMN; De Sa, JMA; Gracio, JJ. "Enhanced assumed strain shell and solid-shell elements: Application in sheet metal forming processes". 2004.
    10.1063/1.1766867
  156. de Sousa, RJA; Cardoso, RPR; Valente, RAF; Yoon, JW; Gracio, JJ; Jorge, RMN. "Development of a one point quadrature EAS solid-shell element". 2004.
    10.1063/1.1766866
  157. Areias, P.M.A.; Natal Jorge, R.M.; Barbosa, J.T.; Fernandas, A.A.; Mascarenhas, T.; Oliveira, M.; Patrício, B.. "Experimental and finite element analysis of human skin elasticity". 2003.
    10.1115/IMECE2003-41204
  158. de Sa, JMAC; Areias, PMA; Jorge, RMN; Valente, RAF. "Techniques for the analysis of metalworking processes using enhanced-strain elements". 2001.
  159. De Sá, J.M.A.C.; Areias, P.M.A.; Jorge, R.M.N.. "Analysis of large elasto-plastic deformations with new compatible mode elements". 2000.
  160. deSa, JC; Jorge, RN. "Enhanced displacement field on low order elements for incompressible problems". 1997.
Artigo em revista
  1. Rita Moura; Dulce A. Oliveira; Marco P.L. Parente; Nina Kimmich; Ludek Hyncík; Lucie H. Hympánová; Renato M. Natal Jorge. "Patient-specific surrogate model to predict pelvic floor dynamics during vaginal delivery". Journal of the Mechanical Behavior of Biomedical Materials (2024): https://doi.org/10.1016/j.jmbbm.2024.106736.
    10.1016/j.jmbbm.2024.106736
  2. Daniel S. Fidalgo; Kayvan Samimi; Melissa C. Skala; Renato M.N. Jorge; Marco P.L. Parente; Ewelina Malanowska; Kristin M. Myers; Dulce A. Oliveira. "Contributing factors to preterm pre-labor rupture of the fetal membrane: Biomechanical analysis of the membrane under different physiological conditions". Mechanics of Materials (2024): https://doi.org/10.1016/j.mechmat.2024.105104.
    10.1016/j.mechmat.2024.105104
  3. Daniel S. Fidalgo; Kayvan Samimi; Michelle L. Oyen; Melissa C. Skala; Renato M.N. Jorge; Marco P.L. Parente; Ewelina Malanowska; Dulce A. Oliveira; Kristin M. Myers. "Development of a multilayer fetal membrane material model calibrated using bulge inflation mechanical tests". Journal of the Mechanical Behavior of Biomedical Materials (2024): https://doi.org/10.1016/j.jmbbm.2023.106344.
    10.1016/j.jmbbm.2023.106344
  4. Rita Moura; Dulce A. Oliveira; Marco P.L. Parente; Nina Kimmich; Renato M. Natal Jorge. "A biomechanical perspective on perineal injuries during childbirth". Computer Methods and Programs in Biomedicine (2024): https://doi.org/10.1016/j.cmpb.2023.107874.
    10.1016/j.cmpb.2023.107874
  5. Daniel E.S. Rodrigues; Jorge Belinha; Renato Natal Jorge. "Numerical simulation of the extrusion process of viscoplastic materials using a radial point interpolation method". Engineering Computations (2023): https://doi.org/10.1108/EC-01-2023-0044.
    10.1108/EC-01-2023-0044
  6. M. I. A. Barbosa; J. Belinha; R. M. Natal Jorge; A. X. Carvalho. "Computationally modelling cell proliferation: A review". International Journal for Numerical Methods in Biomedical Engineering (2023): https://doi.org/10.1002/cnm.3715.
    10.1002/cnm.3715
  7. Ana Pais; Jorge Lino Alves; Renato Natal Jorge; Jorge Belinha. "Multiscale Homogenization Techniques for TPMS Foam Material for Biomedical Structural Applications". Bioengineering (2023): https://doi.org/10.3390/bioengineering10050515.
    10.3390/bioengineering10050515
  8. Andreucci, CA; Fonseca, EMM; Jorge, RN. "Bio-Lubricant Properties Analysis of Drilling an Innovative Design of Bioactive Kinetic Screw into Bone". Designs (2023):
    10.3390/designs7010021
  9. Santos, CF; Bastos, R; Andrade, R; Pereira, R; Parente, MPL; Jorge, RN; Espregueira-Mendes, J. "Revisiting the Role of Knee External Rotation in Non-Contact ACL Mechanism of Injury". APPLIED SCIENCES-BASEL (2023):
    10.3390/app13063802
  10. Andreucci, CA; Fonseca, EMM; Jorge, RN. "Immediate Autogenous Bone Transplantation Using a Novel Kinetic Bioactive Screw 3D Design as a Dental Implant". BioMedInformatics (2023):
    10.3390/biomedinformatics3020020
  11. Gentil, F; Parente, M; Santos, C; Areias, B; Jorge, RN. "Numerical Study of Tympanosclerosis Including Its Effect on Human Hearing". APPLIED SCIENCES-BASEL (2023):
    10.3390/app13031665
  12. Monteiro Reis, S; Ferreira, JPS; Pires, RA; Lobo, J; Carvalho, JA; Reis, RL; Jorge, RN; Jeronimo, C. "Bladder Wall Stiffness after Cystectomy in Bladder Cancer Patients: A Preliminary Study". CANCERS (2023):
    10.3390/cancers15020359
  13. Andreucci, CA; Fonseca, EMM; Jorge, RN. "A New Simplified Autogenous Sinus Lift Technique". BIOENGINEERING-BASEL (2023):
    10.3390/bioengineering10050505
  14. João Manuel R. S. Tavares; Renato Natal Jorge. "Editorial". Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization (2022): https://doi.org/10.1080/21681163.2022.2120175.
    10.1080/21681163.2022.2120175
  15. M.C.P. Vila Pouca; P. Areias; S. Göktepe; J.A. Ashton-Miller; R.M. Natal Jorge; M.P.L. Parente. "Modeling permanent deformation during low-cycle fatigue: Application to the pelvic floor muscles during labor". Journal of the Mechanics and Physics of Solids (2022): https://doi.org/10.1016/j.jmps.2022.104908.
    10.1016/j.jmps.2022.104908
  16. Mariana R. Carvalho; João P. S. Ferreira; Dulce A. Oliveira; Marco P. L. Parente; Renato M. Natal Jorge. "Biomechanical characterization of the small intestine to simulate gastrointestinal tract chyme propulsion". International Journal for Numerical Methods in Biomedical Engineering (2022): https://doi.org/10.1002/cnm.3588.
    10.1002/cnm.3588
  17. Bruno Areias; Marco P. L. Parente; Fernanda Gentil; Cristina Caroça; João Paço; Renato M. Natal Jorge. "A finite element model to predict the consequences of endolymphatic hydrops in the basilar membrane". International Journal for Numerical Methods in Biomedical Engineering 38 1 (2022): https://doi.org/10.1002/cnm.3541.
    10.1002/cnm.3541
  18. Saraiva, MM; Ribeiro, T; Ferreira, JPS; Boas, FV; Afonso, J; Santos, AL; Parente, MPL; et al. "Artificial intelligence for automatic diagnosis of biliary stricture malignancy status in single-operator cholangioscopy: a pilot study". GASTROINTESTINAL ENDOSCOPY (2022):
    10.1016/j.gie.2021.08.027
  19. Moura, R; Borges, M; Oliveira, D; Parente, M; Kimmich, N; Mascarenhas, T; Natal, R. "A biomechanical study of the birth position: a natural struggle between mother and fetus". BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2022):
    10.1007/s10237-022-01569-2
  20. Pouca, MCPV; Ferreira, JPS; Parente, MPL; Jorge, RMN; Ashton Miller, JA. "On the management of maternal pushing during the second stage of labor: a biomechanical study considering passive tissue fatigue damage accumulation". AMERICAN JOURNAL OF OBSTETRICS AND GYNECOLOGY (2022):
    10.1016/j.ajog.2022.01.023
  21. Andreucci, CA; Alshaya, A; Fonseca, EMM; Jorge, RN. "Proposal for a New Bioactive Kinetic Screw in an Implant, Using a Numerical Model". APPLIED SCIENCES-BASEL (2022):
    10.3390/app12020779
  22. Guerra, A; Belinha, J; Jorge, RN. "Using a meshless method to assess the effect of mechanical loading in angiogenesis". MATHEMATICS AND COMPUTERS IN SIMULATION (2022):
    10.1016/j.matcom.2022.05.039
  23. Alperin, M; Abramowitch, S; Alarab, M; Bortolini, M; Brown, B; Burnett, LA; Connell, KA; et al. "Foundational Science and Mechanistic Insights for a Shared Disease Model: An Expert Consensus". FEMALE PELVIC MEDICINE AND RECONSTRUCTIVE SURGERY (2022):
    10.1097/spv.0000000000001216
  24. Alperin, M; Abramowitch, S; Alarab, M; Bortolini, M; Brown, B; Burnett, LA; Connell, KA; et al. "Foundational science and mechanistic insights for a shared disease model: an expert consensus". INTERNATIONAL UROGYNECOLOGY JOURNAL (2022):
    10.1007/s00192-022-05253-y
  25. da Silva, MET; Bessa, JNM; Rynkevic, R; Parente, MPL; Saraiva, MTDECM; Jorge, RMN; Fernandes, AA. "Simulation of vaginal uterosacral ligament suspension damage, mimicking a mesh-augmented apical prolapse repair". PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2022):
    10.1177/09544119221074567
  26. Barbosa, MIA; Belinha, J; Jorge, RMN; Carvalho, AX. "Computational simulation of cellular proliferation using a meshless method". COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE (2022):
    10.1016/j.cmpb.2022.106974
  27. Andreucci, CA; Fonseca, EMM; Jorge, RN. "3D Printing as an Efficient Way to Prototype and Develop Dental Implants". BioMedInformatics (2022):
    10.3390/biomedinformatics2040044
  28. Andreucci, CA; Fonseca, EMM; Jorge, RN. "Increased Material Density within a New Biomechanism". MATHEMATICAL AND COMPUTATIONAL APPLICATIONS (2022):
    10.3390/mca27060090
  29. Tavares, JMRS; Natal Jorge, RM. "Editorial". Comput. methods Biomech. Biomed. Eng. Imaging Vis. (2022):
  30. Ana Guerra; Jorge Belinha; Naside Mangir; Sheila MacNeil; Renato Natal Jorge. "Simulation of the process of angiogenesis: Quantification and assessment of vascular patterning in the chicken chorioallantoic membrane". Computers in Biology and Medicine 136 (2021): 104647-104647. https://doi.org/10.1016/j.compbiomed.2021.104647.
    10.1016/j.compbiomed.2021.104647
  31. M. M. A. Peyroteo; J. Belinha; R. M. Natal Jorge. "Load adaptation through bone remodeling: a mechanobiological model coupled with the finite element method". Biomechanics and Modeling in Mechanobiology (2021): https://doi.org/10.1007/s10237-021-01458-0.
    10.1007/s10237-021-01458-0
  32. Ana Guerra; Jorge Belinha; Naside Mangir; Sheila MacNeil; Renato Natal Jorge. "Sprouting Angiogenesis: A Numerical Approach with Experimental Validation". Annals of Biomedical Engineering (2021): https://doi.org/10.1007/s10439-020-02622-w.
    10.1007/s10439-020-02622-w
  33. Pedro Duarte Menezes; Nikolaj Gadegaard; Renato M. Natal Jorge; Sónia I. S. Pinto. "Modelling human liver microphysiology on a chip through a finite element based design approach". International Journal for Numerical Methods in Biomedical Engineering (2021): https://doi.org/10.1002/cnm.3445.
    10.1002/cnm.3445
  34. Rita Moura; Margarida Borges; Maria C. P. Vila Pouca; Dulce A. Oliveira; Marco P. L. Parente; Nina Kimmich; Teresa Mascarenhas; Renato M. Natal. "A numerical study on fetal head molding during labor". International Journal for Numerical Methods in Biomedical Engineering (2021): https://doi.org/10.1002/cnm.3411.
    10.1002/cnm.3411
  35. Rodrigues, DES; Belinha, J; Dinis, LMJS; Jorge, RMN. "A meshless study of antisymmetric angle-ply laminates using high-order shear deformation theories". COMPOSITE STRUCTURES (2021):
    10.1016/j.compstruct.2020.112795
  36. Peyroteo, MMA; Belinha, J; Jorge, RMN. "A mathematical biomechanical model for bone remodeling integrated with a radial point interpolating meshless method". COMPUTERS IN BIOLOGY AND MEDICINE (2021):
    10.1016/j.compbiomed.2020.104170
  37. Fernandes, P; Sousa, B; Marques, R; Tavares, JMRS; Marques, AT; Jorge, RMN; Pinto, R; Correia, N. "Influence of relaxation on the deployment behaviour of a CFRP composite elastic-hinge". COMPOSITE STRUCTURES (2021):
    10.1016/j.compstruct.2020.113217
  38. Costa, R; Belinha, J; Jorge, RMN; Rodrigues, D. "Simulation of the viscoplastic extrusion process using the radial point interpolation meshless method". PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2021):
    10.1177/1464420720988583
  39. Borges, M; Moura, R; Oliveira, D; Parente, M; Mascarenhas, T; Natal, R. "Effect of the birthing position on its evolution from a biomechanical point of view". COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE (2021):
    10.1016/j.cmpb.2020.105921
  40. Silva, MET; Bessa, JNM; Parente, MPL; Mascarenhas, T; Jorge, RMN; Fernandes, AA. "Effect of mesh anchoring technique in uterine prolapse repair surgery: A finite element analysis*". JOURNAL OF BIOMECHANICS (2021):
    10.1016/j.jbiomech.2021.110649
  41. Costa, ROSS; Belinha, J; Jorge, RMN; Rodrigues, DES. "Optimizing a meshless method for the simulation of the extrusion of non-Newtonian materials". INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021):
    10.1016/j.ijmecsci.2021.106688
  42. Areias, B; Parente, MPL; Gentil, F; Jorge, RMN. "Finite element modelling of the surgical procedure for placement of a straight electrode array: Mechanical and clinical consequences". JOURNAL OF BIOMECHANICS (2021):
    10.1016/j.jbiomech.2021.110812
  43. Oliveira, VCC; Fonseca, EMM; Rua, CC; Belinha, J; Piloto, PAG; Jorge, RMN. "Effect of two different bone cements in thermal necrosis when associated to titanium versus carbon nailing for bone metastases - A numerical study". International Journal of Medical Engineering and Informatics (2021):
    10.1504/ijmei.2021.117729
  44. Peyroteo, MMA; Belinha, J; Jorge, RMN. "A new non targeted bone remodeling model combined with an interpolation meshless method". MATHEMATICS AND COMPUTERS IN SIMULATION (2021):
    10.1016/j.matcom.2021.05.010
  45. Ribeiro, T; Saraiva, MM; Afonso, J; Ferreira, JPS; Boas, FV; Parente, MPL; Jorge, RN; Pereira, P; Macedo, G. "Automatic Identification of Papillary Projections in Indeterminate Biliary Strictures Using Digital Single-Operator Cholangioscopy". CLINICAL AND TRANSLATIONAL GASTROENTEROLOGY (2021):
    10.14309/ctg.0000000000000418
  46. Peyroteo, MMA; Belinha, J; Jorge, RMN. "Predicting bone remodeling using a mechano-biological mathematical model combined with a natural neighbor meshless method". ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2021):
    10.1016/j.enganabound.2021.08.004
  47. Fidalgo, DS; Pouca, MCPV; Oliveira, DA; Malanowska, E; Myers, KM; Jorge, RMN; Parente, MPL. "Mechanical Effects of a Maylard Scar During a Vaginal Birth After a Previous Caesarean". ANNALS OF BIOMEDICAL ENGINEERING (2021):
    10.1007/s10439-021-02805-z
  48. Afonso, J; Saraiva, MJM; Ferreira, JPS; Cardoso, H; Ribeiro, T; Andrade, P; Parente, M; et al. "Development of a Convolutional Neural Network for Detection of Erosions and Ulcers With Distinct Bleeding Potential in Capsule Endoscopy". TECHNIQUES AND INNOVATIONS IN GASTROINTESTINAL ENDOSCOPY (2021):
    10.1016/j.tige.2021.06.003
  49. Rodrigues, DES; Belinha, J; Jorge, RMN. "The Radial Point Interpolation Method in the Bending Analysis Of Symmetric Laminates Using HSDTS". JOURNAL OF COMPUTATIONAL APPLIED MECHANICS (2021):
    10.22059/jcamech.2021.323598.616
  50. Pouca, MCPV; Parente, MPL; Jorge, RMN; DeLancey, JOL; Ashton Miller, JA. "Pelvic floor muscle injury during a difficult labor. Can tissue fatigue damage play a role?". INTERNATIONAL UROGYNECOLOGY JOURNAL (2021):
    10.1007/s00192-021-05012-5
  51. Nascimento, NA; Belinha, J; Jorge, RMN; Rodrigues, DES. "The natural neighbor radial point interpolation method in the Elasto-Static analysis of Honeycomb-Shaped foams". INTERNATIONAL JOURNAL OF COMPUTATIONAL MATERIALS SCIENCE AND ENGINEERING (2021):
    10.1142/s2047684121500147
  52. Rodrigues, DES; Belinha, J; Dinis, LMJS; Jorge, RMN. "The bending behaviour of antisymmetric cross-ply laminates using high-order shear deformation theories and a Radial Point Interpolation Method". STRUCTURES (2021):
    10.1016/j.istruc.2021.03.048
  53. Areias, B; Parente, M; Gentil, F; Jorge, RN. "Influence of the basilar membrane shape and mechanical properties in the cochlear response: A numerical study". PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2021):
    10.1177/09544119211003443
  54. Nascimento, NA; Belinha, J; Jorge, RMN; Rodrigues, DES. "Numerical analysis of honeycomb-shaped polymeric foams using the FEM and the RPIM". ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2021):
    10.1016/j.enganabound.2021.04.015
  55. Rodrigues, D; Belinha, J; Jorge, RMN. "The elasto-plastic analysis of 3D-printed thermoplastics using the NNRPIM and a modified hill yield criterion". PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2021):
    10.1177/1464420720985890
  56. M. Marques; J. Belinha; A. F. Oliveira; M. C. Manzanares Céspedes; R. M Natal Jorge. "Application of an enhanced homogenization technique to the structural multiscale analysis of a femur bone". Computer Methods in Biomechanics and Biomedical Engineering (2020): 1-11. https://doi.org/10.1080/10255842.2020.1768377.
    10.1080/10255842.2020.1768377
  57. J.P.S. Ferreira; M. Kuang; M.P.L. Parente; R.M. Natal Jorge; R. Wang; S.J. Eppell; M. Damaser. "Altered mechanics of vaginal smooth muscle cells due to the lysyl oxidase-like1 knockout". Acta Biomaterialia 110 (2020): 175-187. https://doi.org/10.1016/j.actbio.2020.03.046.
    10.1016/j.actbio.2020.03.046
  58. B. Areias; S. C. Caetano; L. C. Sousa; M. Parente; R. N. Jorge; H. Sousa; J. M. Gonçalves. "Numerical simulation of lateral and transforaminal lumbar interbody fusion, two minimally invasive surgical approaches". Computer Methods in Biomechanics and Biomedical Engineering (2020): 1-14. https://doi.org/10.1080/10255842.2020.1734579.
    10.1080/10255842.2020.1734579
  59. D. S. Fidalgo; B. Areias; L. C. Sousa; M. Parente; R. N. Jorge; H. Sousa; J. M. Gonçalves. "Minimally invasive transforaminal and anterior lumbar interbody fusion surgery at level L5-S1". Computer Methods in Biomechanics and Biomedical Engineering (2020): 1-12. https://doi.org/10.1080/10255842.2020.1731482.
    10.1080/10255842.2020.1731482
  60. J. A. López-Campos; J. P. S. Ferreira; A. Segade; J. R. Fernández; R. M. Natal. "Characterization of hyperelastic and damage behavior of tendons". Computer Methods in Biomechanics and Biomedical Engineering (2020): https://doi.org/10.1080/10255842.2019.1710742.
    10.1080/10255842.2019.1710742
  61. Peyroteo, MMA; Belinha, J; Dinis, LMJS; Jorge, RMN. "Bone remodeling: an improved spatiotemporal mathematical model". ARCHIVE OF APPLIED MECHANICS (2020):
    10.1007/s00419-019-01631-z
  62. Vila Pouca, MCPV; Parente, MPL; Natal Jorge, RMN; Ashton Miller, JA. "Investigating the birth-related caudal maternal pelvic floor muscle injury: The consequences of low cycle fatigue damage". JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020):
    10.1016/j.jmbbm.2020.103956
  63. Marques, M; Belinha, J; Oliveira, AF; Cespedes, MCM; Jorge, RMN. "A 3D trabecular bone homogenization technique". ACTA OF BIOENGINEERING AND BIOMECHANICS (2020):
    10.37190/abb-01611-2020-02
  64. Ferreira, JPS; Kuang, M; Marques, M; Parente, MPL; Damaser, MS; Jorge, RMN. "On the mechanical response of the actomyosin cortex during cell indentations". BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2020):
    10.1007/s10237-020-01324-5
  65. Rodrigues, DES; Belinha, J; Dinis, LMJS; Jorge, RMN. "Analysis of antisymmetric cross-ply laminates using high-order shear deformation theories: a meshless approach". ACTA MECHANICA SINICA (2020):
    10.1007/s10409-020-00990-z
  66. Rodrigues, DES; Belinha, J; Dinis, LMJS; Jorge, RMN. "The numerical analysis of symmetric cross-ply laminates using the natural neighbour radial point interpolation method and high-order shear deformation theories". ENGINEERING STRUCTURES (2020):
    10.1016/j.engstruct.2020.111247
  67. Guerra, A; Belinha, J; Jorge, RN. "A preliminary study of endothelial cell migration during angiogenesis using a meshless method approach". INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN BIOMEDICAL ENGINEERING (2020):
    10.1002/cnm.3393
  68. Joana Lopes Almeida; Renato Natal Jorge. "Review of Research Studies on Biomechanics of Swallowing and Dysphagia". U.Porto Journal of Engineering (2019): https://doi.org/10.24840/2183-6493_005.002_0007.
    10.24840/2183-6493_005.002_0007
  69. João Manuel R. S. Tavares; Renato Natal Jorge. "Special issue: VI ECCOMAS thematic conference on computational vision and medical image processing (VipIMAGE)". Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization (2019): https://doi.org/10.1080/21681163.2019.1679499.
    10.1080/21681163.2019.1679499
  70. Madalena M. A. Peyroteo; Jorge Belinha; Lucia M.J.S. Dinis; Renato M. Natal Jorge. "A new biological bone remodeling in silico model combined with advanced discretization methods". International Journal for Numerical Methods in Biomedical Engineering (2019): e3196-e3196. https://doi.org/10.1002/cnm.3196.
    10.1002/cnm.3196
  71. M.M.A. Peyroteo; J. Belinha; S. Vinga; L.M.J.S. Dinis; R.M. Natal Jorge. "Mechanical bone remodelling: Comparative study of distinct numerical approaches". Engineering Analysis with Boundary Elements 100 (2019): 125-139. https://doi.org/10.1016/j.enganabound.2018.01.011.
    10.1016/j.enganabound.2018.01.011
  72. M. C. P. Vila Pouca; J. P. S. Ferreira; D. A. Oliveira; M. P. L. Parente; M. T. Mascarenhas; R. M. Natal Jorge. "Simulation of the uterine contractions and foetus expulsion using a chemo-mechanical constitutive model". Biomechanics and Modeling in Mechanobiology (2019): https://doi.org/10.1007/s10237-019-01117-5.
    10.1007/s10237-019-01117-5
  73. Marques, M; Belinha, J; Oliveira, AF; Manzanares Cespedes, MC; Jorge, RN. "Combining radial point interpolation meshless method with a new homogenization technique for trabecular bone multiscale structural analyses". ACTA OF BIOENGINEERING AND BIOMECHANICS (2019):
    10.5277/abb-01300-2019-02
  74. Rodrigues, DES; Belinha, J; Jorge, RMN; Dinis, LMJS. "Numerical simulation of compression and tensile tests on thermoplastics: A meshless approach". PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2019):
    10.1177/1464420718810305
  75. Silva, E; Parente, M; Brandao, S; Mascarenhas, T; Jorge, RN. "Characterizing the Biomechanical Properties of the Pubovisceralis Muscle Using a Genetic Algorithm and the Finite Element Method". JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME (2019):
    10.1115/1.4041524
  76. Carvalhais, A; Araujo, J; Jorge, RN; Bo, K. "Urinary incontinence and disordered eating in female elite athletes". JOURNAL OF SCIENCE AND MEDICINE IN SPORT (2019):
    10.1016/j.jsams.2018.07.008
  77. Marques, M; Belinha, J; Oliveira, AF; Manzanares Cespedes, MCM; Natal Jorge, RMN. "A multiscale homogenization procedure combining the fabric tensor with a natural neighbour meshless method". ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2019):
    10.1016/j.enganabound.2018.05.007
  78. Fernandes, MG; Fonseca, EM; Jorge, RN. "Thermo-mechanical stresses distribution on bone drilling: Numerical and experimental procedures". PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2019):
    10.1177/1464420716689337
  79. M. Marques; J. Belinha; L. M. J. S. Dinis; R. M. Natal Jorge. "A new numerical approach to mechanically analyse biological structures". Computer Methods in Biomechanics and Biomedical Engineering (2018): https://doi.org/10.1080/10255842.2018.1538413.
    10.1080/10255842.2018.1538413
  80. Ana Guerra; Jorge Belinha; Renato Natal Jorge. "Modelling skin wound healing angiogenesis: A review". Journal of Theoretical Biology 459 (2018): 1-17. https://doi.org/10.1016/j.jtbi.2018.09.020.
    10.1016/j.jtbi.2018.09.020
  81. João Manuel R. S. Tavares; Renato Natal Jorger. "V ECCOMAS thematic conference on computational vision and medical image processing (VipIMAGE)". Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization 6 4 (2018): 361-361. https://doi.org/10.1080/21681163.2018.1457244.
    10.1080/21681163.2018.1457244
  82. D.E.S. Rodrigues; J. Belinha; F.M.A. Pires; L.M.J.S. Dinis; R.M. Natal Jorge. "Homogenization technique for heterogeneous composite materials using meshless methods". Engineering Analysis with Boundary Elements 92 (2018): 73-89. https://doi.org/10.1016/j.enganabound.2017.12.012.
    10.1016/j.enganabound.2017.12.012
  83. Carla F. Santos; Jorge Belinha; Fernanda Gentil; Marco Parente; Bruno Areias; Renato Natal Jorge. "A computational framework to simulate the endolymph flow due to vestibular rehabilitation maneuvers assessed from accelerometer data". Computer Methods in Biomechanics and Biomedical Engineering (2018): 1-9. https://doi.org/10.1080/10255842.2018.1479745.
    10.1080/10255842.2018.1479745
  84. M.C.P. Vila Pouca; J.P.S. Ferreira; D.A. Oliveira; M.P.L. Parente; R.M. Natal Jorge. "Viscous effects in pelvic floor muscles during childbirth: A numerical study". International Journal for Numerical Methods in Biomedical Engineering 34 3 (2018): e2927-e2927. https://doi.org/10.1002/cnm.2927.
    10.1002/cnm.2927
  85. Leite, RCG; de Jesus, AMP; Correia, J; Raposo, P; Jorge, RN; Parente, MP; Calçada, R. "A methodology for a global-local fatigue analysis of ancient riveted metallic bridges". International Journal of Structural Integrity (2018):
    10.1108/ijsi-07-2017-0047
  86. Carvalhais, A; Da Roza, T; Vilela, S; Jorge, RN; Bo, K. "Association Between Physical Activity Level and Pelvic Floor Muscle Variables in Women". INTERNATIONAL JOURNAL OF SPORTS MEDICINE (2018):
    10.1055/a-0596-7531
  87. Vila Pouca, MCPV; Ferreira, JPS; Oliveira, DA; Parente, MPL; Mascarenhas, T; Natal Jorge, RMN. "On the effect of labour durations using an anisotropic visco-hyperelastic-damage approach to simulate vaginal deliveries". JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018):
    10.1016/j.jmbbm.2018.08.011
  88. Areias, P; Natal Jorge, RN; Cesar de Sa, JC; Rabczuk, T; Reinoso, J. "General constitutive updating for finite strain formulations based on assumed strains and the Jacobian". FINITE ELEMENTS IN ANALYSIS AND DESIGN (2018):
    10.1016/j.finel.2018.01.006
  89. Pina, DS; Fernandes, AA; Jorge, RN; Gabriel, J. "Designing the mechanical frame of an active exoskeleton for gait assistance". ADVANCES IN MECHANICAL ENGINEERING (2018):
    10.1177/1687814017743664
  90. Silva, MET; Parente, MPL; Brandao, S; Mascarenhas, T; Natal Jorge, RMN. "Characterization of the passive and active material parameters of the pubovisceralis muscle using an inverse numerical method". JOURNAL OF BIOMECHANICS (2018):
    10.1016/j.jbiomech.2018.01.033
  91. Marques, M; Belinha, J; Dinis, LMJS; Natal Jorge, R. "A brain impact stress analysis using advanced discretization meshless techniques". Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine (2018):
    10.1177/0954411917751559
  92. Sadek, SHM; Belinha, J; Parente, MPL; Natal Jorge, RMN; Cesar de Sa, JMAC; Ferreira, AJM. "The analysis of composite laminated beams using a 2D interpolating meshless technique". ACTA MECHANICA SINICA (2018):
    10.1007/s10409-017-0701-8
  93. Fernandes, MG; Fonseca, EM; Natal, RM. "Three-dimensional dynamic finite element and experimental models for drilling processes". PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2018):
    10.1177/1464420715609363
  94. Ferreira, JPS; Parente, MPL; Jorge, RMN. "Continuum mechanical model for cross-linked actin networks with contractile bundles". JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018):
    10.1016/j.jmps.2017.09.009
  95. Santos, CF; Belinha, J; Gentil, F; Parente, M; Jorge, RN. "The free vibrations analysis of the cupula in the inner ear using a natural neighbor meshless method". ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2018):
    10.1016/j.enganabound.2018.01.002
  96. Rodrigues, DES; Belinha, J; Pires, FMA; Dinis, LMJS; Jorge, RMN. "Material homogenization technique for composites: A meshless formulation". Science and Technology of Materials (2018):
    10.1016/j.stmat.2018.01.001
  97. S. H. Sadek; B. Areias; M. P. L. Parente; J. Belinha; A. D. Santos; R. M. Natal Jorge. "Aluminum foam sandwich with adhesive bonding: Computational modeling". The Journal of Adhesion (2017): 1-23. https://doi.org/10.1080/00218464.2016.1200975.
    10.1080/00218464.2016.1200975
  98. Dulce A. Oliveira; Marco P. L. Parente; Begoña Calvo; Teresa Mascarenhas; Renato M. Natal Jorge. "The management of episiotomy technique and its effect on pelvic floor muscles during a malposition childbirth". Computer Methods in Biomechanics and Biomedical Engineering (2017):
    10.1080/10255842.2017.1349762
  99. Oliveira, D.A.; Parente, M.P.; Calvo, B.; Mascarenhas, T.; Natal Jorge, R.M.. "A holistic view of the effects of episiotomy on pelvic floor". International Journal for Numerical Methods in Biomedical Engineering (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85020757821&partnerID=MN8TOARS.
    10.1002/cnm.2892
  100. Brandão, S.; Parente, M.; Silva, E.; Da Roza, T.; Mascarenhas, T.; Leitão, J.; Cunha, J.; Natal Jorge, R.; Nunes, R.G.. "Pubovisceralis Muscle Fiber Architecture Determination: Comparison Between Biomechanical Modeling and Diffusion Tensor Imaging". Annals of Biomedical Engineering 45 5 (2017): 1255-1265. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009742825&partnerID=MN8TOARS.
    10.1007/s10439-016-1788-y
  101. Teixeira, T.; Sousa, L.C.; Parente, M.; Natal, R.; Gonçalves, J.M.; Freitas, R.. "Biomechanical study of cervical spine with pathology | Estudo biomecânico da coluna cervical com patologia". Revista Internacional de Metodos Numericos para Calculo y Diseno en Ingenieria 33 1-2 (2017): 72-78. http://www.scopus.com/inward/record.url?eid=2-s2.0-84954348807&partnerID=MN8TOARS.
    10.1016/j.rimni.2015.10.004
  102. Silva, M.E.T.; Brandão, S.; Parente, M.P.L.; Mascarenhas, T.; Natal Jorge, R.M.. "Biomechanical properties of the pelvic floor muscles of continent and incontinent women using an inverse finite element analysis". Computer Methods in Biomechanics and Biomedical Engineering 20 8 (2017): 842-852. http://www.scopus.com/inward/record.url?eid=2-s2.0-85015679668&partnerID=MN8TOARS.
    10.1080/10255842.2017.1304542
  103. Areias, B.; Parente, M.P.L.; Santos, C.; Gentil, F.; Natal Jorge, R.M.. "The human otitis media with effusion: a numerical-based study". Computer Methods in Biomechanics and Biomedical Engineering 20 9 (2017): 958-966. http://www.scopus.com/inward/record.url?eid=2-s2.0-85018377142&partnerID=MN8TOARS.
    10.1080/10255842.2017.1316382
  104. Carvalhais, A.; Natal, J.R.; Bø, K.. "Performing high-level sport is strongly associated with urinary incontinence in elite athletes: A comparative study of 372 elite female athletes and 372 controls". British Journal of Sports Medicine (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85026308765&partnerID=MN8TOARS.
    10.1136/bjsports-2017-097587
  105. Fernandes, MG; Fonseca, EMM; Jorge, RN; Vaz, M; Dias, MI. "Thermal Analysis in Drilling of Ex Vivo Bovine Bones". Journal of Mechanics in Medicine and Biology (2017):
    10.1142/s0219519417500828
  106. Neves, AMA; Ferreira, AJM; Carrera, E; Cinefra, M; Jorge, RMN; Mota Soares, CMM; Araujo, AL. "Influence of zig-zag and warping effects on buckling of functionally graded sandwich plates according to sinusoidal shear deformation theories". MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2017):
    10.1080/15376494.2016.1191095
  107. Ferreira, JPS; Parente, MPL; Jabareen, M; Jorge, RMN. "A general framework for the numerical implementation of anisotropic hyperelastic material models including non-local damage". Biomechanics and Modeling in Mechanobiology (2017):
    10.1007/s10237-017-0875-9
  108. Moreira, SF; Belinha, J; Dinis, LMJS; Natal Jorge, RMN. "The anisotropic elasto-plastic analysis using a natural neighbour RPIM version". JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017):
    10.1007/s40430-016-0603-x
  109. Ferreira, J; Parente, M; Jorge, R. "Modeling of soft tissues with damage". PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2017):
    10.1177/1464420716662295
  110. Santos, CF; Belinha, J; Gentil, F; Parente, M; Jorge, RN. "An alternative 3D numerical method to study the biomechanical behaviour of the human inner ear semicircular canal". ACTA OF BIOENGINEERING AND BIOMECHANICS (2017):
    10.5277/abb-00444-2015-02
  111. Belinha, J; Azevedo, JMC; Dinis, LMJS; Natal Jorge, RMN. "The Natural Neighbor Radial Point Interpolation Method in Computational Fracture Mechanics: A 2D Preliminary Study". INTERNATIONAL JOURNAL OF COMPUTATIONAL METHODS (2017):
    10.1142/s0219876217500451
  112. Silva, MET; Brandao, S; Parente, MPL; Mascarenhas, T; Jorge, RMN. "THE INFLUENCE OF PELVIC ORGAN PROLAPSE ON THE PASSIVE BIOMECHANICAL PROPERTIES OF PELVIC FLOOR MUSCLES". JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY (2017):
    10.1142/s0219519417500907
  113. Belinha, J; Azevedo, JMC; Dinis, LMJS; Jorge, RMN. "Simulating fracture propagation in brittle materials using a meshless approach". Engineering with Computers (2017):
    10.1007/s00366-017-0555-5
  114. Faria, L; Campos, B; Jorge, RN. "Biomechanics of the shoulder girdle: a case study on the effects of union rugby tackles". ACTA OF BIOENGINEERING AND BIOMECHANICS (2017):
    10.5277/abb-00651-2016-04
  115. Brandão, S; Parente, M; Da Roza, TH; Silva, E; Ramos, IM; Mascarenhas, T; Jorge, RMN. "On the Stiffness of the Mesh and Urethral Mobility: A Finite Element Analysis". Journal of Biomechanical Engineering (2017):
    10.1115/1.4036606
  116. J. Belinha; A.L. Araújo; A.J.M. Ferreira; L.M.J.S. Dinis; R.M. Natal Jorge. "The analysis of laminated plates using distinct advanced discretization meshless techniques". Composite Structures 143 (2016): 165-179. https://doi.org/10.1016/j.compstruct.2016.02.021.
    10.1016/j.compstruct.2016.02.021
  117. Gentil, F.; Parente, M.; Martins, P.; Garbe, C.; Santos, C.; Areias, B.; Branco, C.; Paço, J.; Jorge, R.N.. "Effects of the fibers distribution in the human eardrum: A biomechanical study". Journal of Biomechanics 49 9 (2016): 1518-1523. http://www.scopus.com/inward/record.url?eid=2-s2.0-84978322446&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2016.03.030
  118. Silva, M.E.T.; Brandão, S.; Parente, M.P.L.; Mascarenhas, T.; Natal Jorge, R.M.. "Establishing the biomechanical properties of the pelvic soft tissues through an inverse finite element analysis using magnetic resonance imaging". Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 230 4 (2016): 298-309. http://www.scopus.com/inward/record.url?eid=2-s2.0-84961244040&partnerID=MN8TOARS.
    10.1177/0954411916630571
  119. Fernandes, M.G.A.; Fonseca, E.M.M.; Natal, R.J.. "Thermal analysis during bone drilling using rigid polyurethane foams: numerical and experimental methodologies". Journal of the Brazilian Society of Mechanical Sciences and Engineering 38 7 (2016): 1855-1863. http://www.scopus.com/inward/record.url?eid=2-s2.0-84987654743&partnerID=MN8TOARS.
    10.1007/s40430-016-0560-4
  120. Tavares, J.M.R.S.; Jorge, R.N.. "Special issue: IV ECCOMAS thematic conference on computational vision and medical image processing (VipIMAGE)". Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization 4 3-4 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84981362591&partnerID=MN8TOARS.
    10.1080/21681163.2016.1175759
  121. Oliveira, D.A.; Parente, M.P.L.; Calvo, B.; Mascarenhas, T.; Natal Jorge, R.M.. "Numerical simulation of the damage evolution in the pelvic floor muscles during childbirth". Journal of Biomechanics 49 4 (2016): 594-601. http://www.scopus.com/inward/record.url?eid=2-s2.0-84968456923&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2016.01.014
  122. Areias, B.; Santos, C.; Natal Jorge, R.M.; Gentil, F.; Parente, M.P.L.. "Finite element modelling of sound transmission from outer to inner ear". Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 230 11 (2016): 999-1007. http://www.scopus.com/inward/record.url?eid=2-s2.0-84992020793&partnerID=MN8TOARS.
    10.1177/0954411916666109
  123. Ferreira, J.; Parente, M.; Mascarenhas, T.; Damaser, M.; Jorge, R.N.. "Cellular modelling in functional tissue engineering: Review oriented for pelvic floor dysfunctions". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230 1 (2016): 5-17. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962523041&partnerID=MN8TOARS.
    10.1177/1464420715592905
  124. Duarte, HMS; Rafael Andrade, JR; Dinis, LMJS; Natal Jorge, RMN; Belinha, J. "Numerical analysis of dental implants using a new advanced discretization technique". MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2016):
    10.1080/15376494.2014.987410
  125. Parente, M; Safdarian, R; Santos, AD; Loureiro, A; Vilaca, P; Natal Jorge, RMN. "A study on the formability of aluminum tailor welded blanks produced by friction stir welding". INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016):
    10.1007/s00170-015-7950-0
  126. Oliveira, DA; Parente, MPL; Calvo, B; Mascarenhas, T; Jorge, RMN. "A biomechanical analysis on the impact of episiotomy during childbirth". BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2016):
    10.1007/s10237-016-0781-6
  127. Roque, CMC; Martins, PALS; Ferreira, AJM; Jorge, RMN. "Differential evolution for free vibration optimization of functionally graded nano beams". COMPOSITE STRUCTURES (2016):
    10.1016/j.compstruct.2016.03.052
  128. Belinha, J; Azevedo, JMC; Dinis, LMJS; Jorge, RMN. "The Natural Neighbor Radial Point Interpolation Method Extended to the Crack Growth Simulation". International Journal of Applied Mechanics (2016):
    10.1142/s175882511650006x
  129. Porto, CPS; Parente, MPL; Jorge, RMN; Pereira, LC; Griza, S. "Fracture toughness of the interface between Ni–Cr/ceramic, alumina/ceramic and zirconia/ceramic systems". Fatigue and Fracture of Engineering Materials and Structures (2016):
    10.1111/ffe.12394
  130. Jorge, Renato. "The analysis of the bone remodelling around femoral stems: A meshless approach". Mathematics and Computers in Simulation (2015):
    10.1016/j.matcom.2015.09.002
  131. Azevedo, J.M.C.; Belinha, J.; Dinis, L.M.J.S.; Natal Jorge, R.M.. "Crack path prediction using the natural neighbour radial point interpolation method". Engineering Analysis with Boundary Elements 59 (2015): 144-158. http://www.scopus.com/inward/record.url?eid=2-s2.0-84933514222&partnerID=MN8TOARS.
    10.1016/j.enganabound.2015.06.001
  132. Brandão, F.S.Q.D.S.; Parente, M.P.L.; Rocha, P.A.G.G.; Saraiva, M.T.D.Q.E.C.D.M.; Ramos, I.M.A.P.; Natal Jorge, R.M.. "Modeling the contraction of the pelvic floor muscles". Computer Methods in Biomechanics and Biomedical Engineering (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84929009196&partnerID=MN8TOARS.
    10.1080/10255842.2015.1028031
  133. Areias, P.; Rabczuk, T.; de Sá, J.C.; Natal Jorge, R.. "A semi-implicit finite strain shell algorithm using in-plane strains based on least-squares". Computational Mechanics 55 4 (2015): 673-696. http://www.scopus.com/inward/record.url?eid=2-s2.0-84939934699&partnerID=MN8TOARS.
    10.1007/s00466-015-1130-9
  134. Safdarian, R.; Jorge, R.M.N.; Santos, A.D.; Naeini, H.M.; Parente, M.P.L.. "A comparative study of forming limit diagram prediction of tailor welded blanks". International Journal of Material Forming 8 2 (2015): 293-304. http://www.scopus.com/inward/record.url?eid=2-s2.0-84928376417&partnerID=MN8TOARS.
    10.1007/s12289-014-1168-9
  135. Berdich, K.; Gentil, F.; Parente, M.; Garbe, C.; Santos, C.; Paço, J.; Natal Jorge, R.M.; Martins, P.; Faur, N.. "Finite element analysis of the transfer of sound in the myringosclerotic ear". Computer Methods in Biomechanics and Biomedical Engineering (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84923252727&partnerID=MN8TOARS.
    10.1080/10255842.2015.1010526
  136. Roza, T.D.; Brandão, S.; Oliveira, D.; Mascarenhas, T.; Parente, M.; Duarte, J.A.; Jorge, R.N.. "Football practice and urinary incontinence: Relation between morphology, function and biomechanics". Journal of Biomechanics 48 9 (2015): 1587-1592. http://www.scopus.com/inward/record.url?eid=2-s2.0-84930541168&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2015.03.013
  137. Da Roza, T.; Brandão, S.; Mascarenhas, T.; Jorge, R.N.; Duarte, J.A.. "Volume of training and the ranking level are associated with the leakage of urine in young female trampolinists". Clinical Journal of Sport Medicine 25 3 (2015): 270-275. http://www.scopus.com/inward/record.url?eid=2-s2.0-84929045011&partnerID=MN8TOARS.
    10.1097/JSM.0000000000000129
  138. Brandão, S.; Parente, M.; Mascarenhas, T.; da Silva, A.R.G.; Ramos, I.; Jorge, R.N.. "Biomechanical study on the bladder neck and urethral positions: Simulation of impairment of the pelvic ligaments". Journal of Biomechanics 48 2 (2015): 217-223. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920287373&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2014.11.045
  139. Silva, M.E.T.; Oliveira, D.A.; Roza, T.H.; Brandão, S.; Parente, M.P.L.; Mascarenhas, T.; Natal Jorge, R.M.. "Study on the influence of the fetus head molding on the biomechanical behavior of the pelvic floor muscles, during vaginal delivery". Journal of Biomechanics 48 9 (2015): 1600-1605. http://www.scopus.com/inward/record.url?eid=2-s2.0-84930541489&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2015.02.032
  140. Martins, P.A.L.S.; Ferreira, F.; Natal Jorge, R.; Parente, M.; Santos, A.. "Necromechanics: Death-induced changes in the mechanical properties of human tissues". Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 229 5 (2015): 343-349. http://www.scopus.com/inward/record.url?eid=2-s2.0-84930425371&partnerID=MN8TOARS.
    10.1177/0954411915581409
  141. Gentil, F.; Marques, M.; Parente, M.; Martins, P.; Santos, C.; Jorge, R.N.. "Total ossicular replacement prosthesis of the middle ear: A biomechanical analysis". Journal of Mechanics in Medicine and Biology 15 2 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84928389803&partnerID=MN8TOARS.
    10.1142/S0219519415400060
  142. Belinha, J.; Dinis, L.M.J.S.; Jorge, R.M.N.. "The mandible remodeling induced by dental implants: A meshless approach". Journal of Mechanics in Medicine and Biology 15 4 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84939568372&partnerID=MN8TOARS.
    10.1142/S0219519415500591
  143. Gentil, F.; Meireles, S.; Roza, T.; Santos, C.; Parente, M.; Almeida, E.; Natal, R.. "Comparison of otoacoustic emissions in patients with tinnitus having normal hearing versus mild hearing loss". International Tinnitus Journal 19 2 (2015): 39-46. http://www.scopus.com/inward/record.url?eid=2-s2.0-84975105868&partnerID=MN8TOARS.
    10.5935/0946-5448.20150007
  144. Di Giamberardino, P.; Iacoviello, D.; Natal Jorge, R.M.; Tavares, J.M.R.S.. "Computational modeling of objects presented in images: fundamentals, methods and applications". Computer Methods in Biomechanics and Biomedical Engineering: Imaging and Visualization 3 2 (2015): 61-62. http://www.scopus.com/inward/record.url?eid=2-s2.0-84981359578&partnerID=MN8TOARS.
    10.1080/21681163.2015.1049844
  145. Brandão, S.; Da Roza, T.; Mascarenhas, T.; Ramos, I.; Natal Jorge, R.. "Do asymptomatic former high-impact sports practitioners maintain the ability to contract the pelvic loor muscles?". Journal of Sports Medicine and Physical Fitness 55 11 (2015): 1272-1276. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962518891&partnerID=MN8TOARS.
  146. Gentil, F.; Parente, M.; Martins, P.; Santos, C.; Almeida, E.; Ferreira, A.; Natal, R.. "Numerical study of Hough technique in surgery of otosclerosis, using the finite element method". Acta of Bioengineering and Biomechanics 17 4 (2015): 149-153. http://www.scopus.com/inward/record.url?eid=2-s2.0-84964228157&partnerID=MN8TOARS.
    10.5277/ABB-00289-2015-03
  147. Da Roza, T; Brandao, S; Mascarenhas, T; Jorge, RN; Duarte, JA. "Urinary Incontinence and Levels of Regular Physical Exercise in Young Women". INTERNATIONAL JOURNAL OF SPORTS MEDICINE (2015):
    10.1055/s-0034-1398625
  148. Brandao, S; Da Roza, T; Mascarenhas, T; Ramos, I; Natal Jorge, RN. "Do asymptomatic former high-impact sports practitioners maintain the ability to contract the pelvic floor muscles?". JOURNAL OF SPORTS MEDICINE AND PHYSICAL FITNESS (2015):
  149. Jorge, Renato. "Understanding the travel experience and its impact on attitudes, emotions and loyalty towards the transportation provider–A quantitative study with mid-distance bus trips". Transport Policy (2014):
    10.1016/j.tranpol.2013.11.006
  150. Moreira, S.; Belinha, J.; Dinis, L.M.J.S.; Jorge, R.M.N.. "Analysis of laminated beams using the natural neighbour radial point interpolation method | Análise de vigas laminadas utilizando o natural neighbour radial point interpolation method". Revista Internacional de Metodos Numericos para Calculo y Diseno en Ingenieria 30 2 (2014): 108-120. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901642344&partnerID=MN8TOARS.
    10.1016/j.rimni.2013.02.002
  151. Marin, K.C.; Berdich-Kun, K.-N.; Gentil, F.; Parente, M.; Natal, R.J.; Marin, H.A.; Poenaru, M.; Popa, D.R.. "Application of a finite element model in the diagnosis process of middle ear pathologies". Romanian Journal of Morphology and Embryology 55 4 (2014): 1511-1514. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920366185&partnerID=MN8TOARS.
  152. Barros, L.S.; Talaia, P.; Drummond, M.; Natal-Jorge, R.. "Facial pressure zones of an oronasal interface for noninvasive ventilation: A computer model analysis | Pontos de tensão de uma interface oronasal para ventilação não invasiva: Uma análise através de um modelo computacional". Jornal Brasileiro de Pneumologia 40 6 (2014): 652-657. http://www.scopus.com/inward/record.url?eid=2-s2.0-84921830434&partnerID=MN8TOARS.
    10.1590/S1806-37132014000600009
  153. Gentil, F.; Garbe, C.; Parente, M.; Martins, P.; Ferreira, A.; Jorge, R.N.; Santos, C.; Paço, J.. "Analysis of eardrum pathologies using the finite element method". Journal of Mechanics in Medicine and Biology 14 3 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84896391702&partnerID=MN8TOARS.
    10.1142/S0219519414500341
  154. Pina, D.F.; Fernandes, A.A.; Natal Jorge, R.M.; Mendes, J.G.. "A statistical study regarding the state-of-the-art of active motion-oriented assistive devices". Biomedical Engineering - Applications, Basis and Communications 26 3 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84896487692&partnerID=MN8TOARS.
    10.4015/S1016237214500471
  155. Moreira, S.F.; Belinha, J.; Dinis, L.M.J.S.; Natal Jorge, R.M.. "A global numerical analysis of the "central incisor/local maxillary bone" system using a meshless method". MCB Molecular and Cellular Biomechanics 11 3 (2014): 151-184. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920059394&partnerID=MN8TOARS.
  156. Garbe, C.; Gentil, F.; Parente, M.; Martins, P.; Santos, C.; Branco, C.; Paço, J.; Natal Jorge, R.. "Study of the middle ear behavior considering the presence of fluid". Revista Internacional de Metodos Numericos para Calculo y Diseno en Ingenieria (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84931858056&partnerID=MN8TOARS.
    10.1016/j.rimni.2015.05.001
  157. Gentil, F.; Garbe, C.; Parente, M.; Martins, P.; Santos, C.; Almeida, E.; Jorge, R.N.. "The biomechanical effects of stapes replacement by prostheses on the tympano-ossicular chain". International Journal for Numerical Methods in Biomedical Engineering (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84906009319&partnerID=MN8TOARS.
    10.1002/cnm.2664
  158. Da Roza, T.; Jorge, R.N.; Mascarenhas, T.; Duarte, J.A.. "Urinary incontinence in sport women: From risk factors to treatment - a review". Current Women's Health Reviews 9 2 (2013): 77-84. http://www.scopus.com/inward/record.url?eid=2-s2.0-84891781442&partnerID=MN8TOARS.
    10.2174/157340480902140102152031
  159. Brandão, S.; Da Roza, T.; Parente, M.; Ramos, I.; Mascarenhas, T.; Jorge, R.M.N.. "Magnetic resonance imaging of the pelvic floor: From clinical to biomechanical imaging". Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 227 12 (2013): 1324-1332. http://www.scopus.com/inward/record.url?eid=2-s2.0-84890543231&partnerID=MN8TOARS.
    10.1177/0954411913502952
  160. Martins, Pedro; Silva-Filho, Agnaldo Lopes; Rodrigues Maciel da Fonseca, Andrea Moura; Santos, Agostinho; Santos, Liliana; Mascarenhas, Teresa; Natal Jorge, Renato M.; Ferreira, Antonio J. M.. "Biomechanical Properties of Vaginal Tissue in Women with Pelvic Organ Prolapse". Gynecologic and Obstetric Investigation 75 2 (2013): 85-92.
    10.1159/000343230
  161. Belinha, Jorge; Natal Jorge, Renato M.; Dinis, Lucia M. J. S.. "A meshless microscale bone tissue trabecular remodelling analysis considering a new anisotropic bone tissue material law". Computer Methods in Biomechanics and Biomedical Engineering 16 11 (2013): 1170-1184.
    10.1080/10255842.2012.654783
  162. Parente, M. P. L.; Natal Jorge, R. M.; Aguiar Vieira, A.; Santos, S.; Monteiro Baptista, A.. "Experimental and Numerical Study on the Temperature Field during Surface Grinding of a Ti-6Al-4V Titanium Alloy". Mechanics of Advanced Materials and Structures 20 5 (2013): 397-404.
    10.1080/15376494.2011.627641
  163. Braga, Iracema Utsch; Rocha, Daniel Neves; Utsch, Ricardo Luiz; Las Casas, Estevam Barbosa; Andrade, Roberto Marcio; Jorge, Renato Natal; Braga, Rafael Utsch. "Determination of expander apparatus displacements and contact pressures on the mucosa using FEM modelling considering mandibular asymmetries". Computer Methods in Biomechanics and Biomedical Engineering 16 9 (2013): 954-962.
    10.1080/10255842.2011.645227
  164. Da Roza, T.; Mascarenhas, T.; Araujo, M.; Trindade, V.; Jorge, R. Natal. "Oxford Grading Scale vs manometer for assessment of pelvic floor strength in nulliparous sports students". Physiotherapy 99 3 (2013): 207-211.
    10.1016/j.physio.2012.05.014
  165. Ma, Z.; Jorge, R.N.; Mascarenhas, T.; Tavares, J.M.R.S.. "A level set based algorithm to reconstruct the urinary bladder from multiple views". Medical Engineering and Physics 35 12 (2013): 1819-1824. http://www.scopus.com/inward/record.url?eid=2-s2.0-84889569192&partnerID=MN8TOARS.
    10.1016/j.medengphy.2013.05.002
  166. Neves, A.M.A.; Ferreira, A.J.M.; Carrera, E.; Cinefra, M.; Roque, C.M.C.; Jorge, R.M.N.; Soares, C.M.M.. "Free vibration analysis of functionally graded shells by a higher-order shear deformation theory and radial basis functions collocation, accounting for through-the-thickness deformations". European Journal of Mechanics, A/Solids 37 (2013): 24-34. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861979045&partnerID=MN8TOARS.
    10.1016/j.euromechsol.2012.05.005
  167. Carreira, R.; Patrício, L.; Jorge, R.N.; Magee, C.L.. "Development of an extended Kansei engineering method to incorporate experience requirements in product-service system design". Journal of Engineering Design 24 10 (2013): 738-764. http://www.scopus.com/inward/record.url?eid=2-s2.0-84887124174&partnerID=MN8TOARS.
    10.1080/09544828.2013.834038
  168. Belinha, J.; Dinis, L.M.J.S.; Jorge, R.M.N.. "Composite laminated plate analysis using the natural radial element method". Composite Structures 103 (2013): 50-67. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878448993&partnerID=MN8TOARS.
    10.1016/j.compstruct.2013.03.018
  169. Belinha, J.; Dinis, L.M.J.S.; Natal Jorge, R.M.. "Analysis of thick plates by the natural radial element method". International Journal of Mechanical Sciences 76 (2013): 33-48. http://www.scopus.com/inward/record.url?eid=2-s2.0-84884843299&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2013.08.011
  170. Mata, H.; Santos, A.D.; Parente, M.P.L.; Valente, R.A.F.; Fernandes, A.A.; Jorge, R.N.. "Study on the forming of sandwich shells with closed-cell foam cores". International Journal of Material Forming 7 4 (2013): 413-424. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920252234&partnerID=MN8TOARS.
    10.1007/s12289-013-1136-9
  171. Martins, P.; Silva-Filho, A.L.; Fonseca, A.M.R.M.; Santos, A.; Santos, L.; Mascarenhas, T.; Jorge, R.M.N.; Ferreira, A.M.. "Strength of round and uterosacral ligaments: A biomechanical study". Archives of Gynecology and Obstetrics 287 2 (2013): 313-318. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878366729&partnerID=MN8TOARS.
    10.1007/s00404-012-2564-3
  172. Neves, A.M.A.; Ferreira, A.J.M.; Carrera, E.; Cinefra, M.; Roque, C.M.C.; Jorge, R.M.N.; Soares, C.M.M.. "Static, free vibration and buckling analysis of isotropic and sandwich functionally graded plates using a quasi-3D higher-order shear deformation theory and a meshless technique". Composites Part B: Engineering 44 1 (2013): 657-674. http://www.scopus.com/inward/record.url?eid=2-s2.0-84867498539&partnerID=MN8TOARS.
    10.1016/j.compositesb.2012.01.089
  173. Tavares, J.M.R.S.; Jorge, R.M.. "Special issue on computational methods for biomedical image processing and analysis". International Journal for Numerical Methods in Biomedical Engineering 29 9 (2013): 885-886. http://www.scopus.com/inward/record.url?eid=2-s2.0-84883657033&partnerID=MN8TOARS.
    10.1002/cnm.2574
  174. Ma, Z.; Jorge, R.M.N.; Mascarenhas, T.; Tavares, J.M.R.S.. "Segmentation of female pelvic organs in axial magnetic resonance images using coupled geometric deformable models". Computers in Biology and Medicine 43 4 (2013): 248-258. http://www.scopus.com/inward/record.url?eid=2-s2.0-84875376165&partnerID=MN8TOARS.
    10.1016/j.compbiomed.2012.12.012
  175. Brandão, S.; Da Roza, T.; Mascarenhas, T.; Duarte, S.; Ramos, I.; Parente, M.; Jorge, R.N.. "Moment of inertia as a means to evaluate the biomechanical impact of pelvic organ prolapse". International Journal of Urology 20 1 (2013): 86-92. http://www.scopus.com/inward/record.url?eid=2-s2.0-84871935100&partnerID=MN8TOARS.
    10.1111/j.1442-2042.2012.03219.x
  176. Carreira, R.; Patrício, L.; Natal Jorge, R.; Magee, C.; Van Eikema Hommes, Q.. "Towards a holistic approach to the travel experience: A qualitative study of bus transportation". Transport Policy 25 (2013): 233-243. http://www.scopus.com/inward/record.url?eid=2-s2.0-84875167512&partnerID=MN8TOARS.
    10.1016/j.tranpol.2012.11.009
  177. Belinha, J.; Dinis, L.M.J.S.; Natal Jorge, R.M.. "The natural radial element method". International Journal for Numerical Methods in Engineering 93 12 (2013): 1286-1313. http://www.scopus.com/inward/record.url?eid=2-s2.0-84874205135&partnerID=MN8TOARS.
    10.1002/nme.4427
  178. Trindade, V.L.A.; Martins, P.A.L.S.; Parente, M.P.L.; Natal Jorge, R.M.; Santos, A.; Santos, L.; Fernandes, J.M.. "The influence of regional profiles and senescence on the biomechanical properties of the temporalis muscle". Journal of Biomechanics 46 9 (2013): 1592-1595. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878016362&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2013.03.015
  179. Gentil, F.; Parente, M.; Martins, P.; Garbe, C.; Paço, J.; Ferreira, A.J.M.; Tavares, J.M.R.S.; Jorge, R.N.. "The influence of muscles activation on the dynamical behaviour of the tympano-ossicular system of the middle ear". Computer Methods in Biomechanics and Biomedical Engineering 16 4 (2013): 392-402. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876275474&partnerID=MN8TOARS.
    10.1080/10255842.2011.623674
  180. Neves, A.M.A.; Ferreira, A.J.M.; Carrera, E.; Cinefra, M.; Roque, C.M.C.; Mota Soares, C.M.; Jorge, R.M.N.. "Buckling of laminated and functionally graded plates using radial basis functions". Civil-Comp Proceedings 99 (2012): http://www.scopus.com/inward/record.url?eid=2-s2.0-84893936439&partnerID=MN8TOARS.
  181. Martins, P.; Pena, E.; Natal Jorge, R. M.; Santos, A.; Santos, L.; Mascarenhas, T.; Calvo, B.. "Mechanical characterization and constitutive modelling of the damage process in rectus sheath". Journal of the Mechanical Behavior of Biomedical Materials 8 (2012): 111-122.
    10.1016/j.jmbbm.2011.12.005
  182. Mata, H.; Natal Jorge, R.; Santos, A. D.; Parente, M. P. L.; Valente, R. A. F.; Fernandes, A. A.; Merklein, M; Hagenah, H. "Numerical Modelling and Experimental Study of Sandwich Shells with Metal Foam Cores". Material Forming - Esaform 2012, Pts 1 & 2 504-506 (2012): 449-454.
    10.4028/www.scientific.net/KEM.504-506.449
  183. Da Roza, Thuane; de Araujo, Maita Poli; Viana, Rui; Viana, Sara; Jorge, Renato Natal; Bo, Kari; Mascarenhas, Teresa. "Pelvic floor muscle training to improve urinary incontinence in young, nulliparous sport students: a pilot study". International Urogynecology Journal 23 8 (2012): 1069-1073.
    10.1007/s00192-012-1759-2
  184. Voinescu, M.; Soares, D.P.; Natal Jorge, R.M.; Davidescu, A.; Machado, L.J.. "Estimation of the forces generated by the thigh muscles for transtibial amputee gait". Journal of Biomechanics 45 6 (2012): 972-977. http://www.scopus.com/inward/record.url?eid=2-s2.0-84858624383&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2012.01.010
  185. Neves, A.M.A.; Ferreira, A.J.M.; Carrera, E.; Cinefra, M.; Roque, C.M.C.; Jorge, R.N.N.; Soares, C.M.M.. "Buckling behaviour of cross-ply laminated plates by a higher-order shear deformation theory". Science and Engineering of Composite Materials 19 2 (2012): 119-125. http://www.scopus.com/inward/record.url?eid=2-s2.0-84869827336&partnerID=MN8TOARS.
    10.1515/secm-2011-0131
  186. Neves, A.M.A.; Ferreira, A.J.M.; Carrera, E.; Cinefra, M.; Jorge, R.M.N.; Soares, C.M.M.. "Buckling analysis of sandwich plates with functionally graded skins using a new quasi-3D hyperbolic sine shear deformation theory and collocation with radial basis functions". ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik 92 9 (2012): 749-766. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865742317&partnerID=MN8TOARS.
    10.1002/zamm.201100186
  187. Belinha, J.; Natal Jorge, R.M.; Dinis, L.M.J.S.. "Bone tissue remodelling analysis considering a radial point interpolator meshless method". Engineering Analysis with Boundary Elements 36 11 (2012): 1660-1670. http://www.scopus.com/inward/record.url?eid=2-s2.0-84863486074&partnerID=MN8TOARS.
    10.1016/j.enganabound.2012.05.009
  188. Neves, A.M.A.; Ferreira, A.J.M.; Carrera, E.; Roque, C.M.C.; Cinefra, M.; Jorge, R.M.N.; Soares, C.M.M.. "A quasi-3D sinusoidal shear deformation theory for the static and free vibration analysis of functionally graded plates". Composites Part B: Engineering 43 2 (2012): 711-725. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856484890&partnerID=MN8TOARS.
    10.1016/j.compositesb.2011.08.009
  189. Neves, A.M.A.; Ferreira, A.J.M.; Carrera, E.; Cinefra, M.; Roque, C.M.C.; Jorge, R.M.N.; Soares, C.M.M.. "A quasi-3D hyperbolic shear deformation theory for the static and free vibration analysis of functionally graded plates". Composite Structures 94 5 (2012): 1814-1825. http://www.scopus.com/inward/record.url?eid=2-s2.0-84858707989&partnerID=MN8TOARS.
    10.1016/j.compstruct.2011.12.005
  190. Neves, A.M.A.; Ferreira, A.J.M.; Carrera, E.; Cinefra, M.; Jorge, R.M.N.; Soares, C.M.M.. "Static analysis of functionally graded sandwich plates according to a hyperbolic theory considering Zig-Zag and warping effects". Advances in Engineering Software 52 (2012): 30-43. http://www.scopus.com/inward/record.url?eid=2-s2.0-84863459966&partnerID=MN8TOARS.
    10.1016/j.advengsoft.2012.05.005
  191. Ma, Z.; Jorge, R.N.M.; Mascarenhas, T.; Tavares, J.M.R.S.. "Segmentation of female pelvic cavity in axial T2-weighted MR images towards the 3D reconstruction". International Journal for Numerical Methods in Biomedical Engineering 28 6-7 (2012): 714-726. http://www.scopus.com/inward/record.url?eid=2-s2.0-84862316152&partnerID=MN8TOARS.
    10.1002/cnm.2463
  192. Trindade, V.L.A.; Martins, P.A.L.S.; Santos, S.; Parente, M.P.L.; Natal Jorge, R.M.; Santos, A.; Santos, L.; Fernandes, J.M.. "Experimental study of the influence of senescence in the biomechanical properties of the temporal tendon and deep temporal fascia based on uniaxial tension tests". Journal of Biomechanics 45 1 (2012): 199-201. http://www.scopus.com/inward/record.url?eid=2-s2.0-83555177297&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2011.09.018
  193. Parente, M.P.L.; Natal Jorge, R.M.; Aguiar Vieira, A.; Monteiro Baptista, A.. "Experimental and numerical study of the temperature field during creep feed grinding". International Journal of Advanced Manufacturing Technology 61 1-4 (2012): 127-134. http://www.scopus.com/inward/record.url?eid=2-s2.0-84862550463&partnerID=MN8TOARS.
    10.1007/s00170-011-3711-x
  194. Ma, Z; Jorge, RN; Tavares, JMR. "SEGMENTATION AND 3D RECONSTRUCTION OF FEMALE PELVIC ORGANS AND MUSCLES FROM T2-WEIGHTED MAGNETIC RESONANCE IMAGES". Journal of Biomechanics (2012):
    10.1016/s0021-9290(12)70465-7
  195. Garbe, C; Gentil, F; Parente, M; Martins, P; Jorge, RN. "STUDY OF THE STRESS OF THE TENSOR TYMPANI MUSCLE FOR DIFFERENT CASES OF THE EARDRUM". Journal of Biomechanics (2012):
    10.1016/s0021-9290(12)70187-2
  196. Gentil, F; Parente, M; Martins, P; Garbe, C; Almeida, E; Tavares, JMR; Jorge, RN. "STAPEDOTOMY-HOUGH TECHNIQUE TO CORRECT OTOSCLEROSIS". Journal of Biomechanics (2012):
    10.1016/s0021-9290(12)70184-7
  197. Mata, H.; Jorge, R. Natal; Fernandes, A. A.; Valente, R. A. F.; Parente, M. P. L.; Duflou, JR; Clarke, R; et al. "FEM analysis of Sandwich Shells with Metallic Foam Cores". Sheet Metal 2011 473 (2011): 659-666.
    10.4028/www.scientific.net/KEM.473.659
  198. Mata, H.; Jorge, R. Natal; Santos, A.; Fernandes, A. A.; Valente, R. A. F.; Parente, M. P. L.; Chung, K; et al. "Modeling of Sandwich Sheets with Metallic Foam". 8th International Conference and Workshop on Numerical Simulation of 3d Sheet Metal Forming Processes (Numisheet 2011), Pts a and B 1383 (2011): 725-732.
    10.1063/1.3623678
  199. Saleme, C. S.; Parente, M. P. L.; Natal Jorge, R. M.; Pinotti, M.; Silva-Filho, A. L.; Roza, T.; Mascarenhas, T.; Tavares, Joao Manuel R. S.. "An approach on determining the displacements of the pelvic floor during voluntary contraction using numerical simulation and MRI". Computer Methods in Biomechanics and Biomedical Engineering 14 4 (2011): 365-370.
    10.1080/10255842.2010.482045
  200. Mata, H.; Santos, A.; Fernandes, A. A.; Valente, R. A. F.; Parente, M. P. L.; Natal Jorge, R.; Menary, G. "Analysis of Sandwich Shells with Metallic Foam Cores based on the Uniaxial Tensile Test". 14th International Conference on Material Forming Esaform, 2011 Proceedings 1353 (2011): 1232-1237.
    10.1063/1.3589685
  201. Caseiro, Joao F. M.; Valente, Robertt A. F.; Andrade-Campos, Antonio; Natal Jorge, Renato M.; Duflou, JR; Clarke, R; Merklein, M; et al. "Optimisation of tubular hydroforming processes for wrinkling and thinning control". Sheet Metal 2011 473 (2011): 159-167.
    10.4028/www.scientific.net/KEM.473.159
  202. Caseiro, J. F.; Valente, R. A. F.; Andrade-Campos, A.; Natal Jorge, R. M.; Menary, G. "On a New Optimization Approach for the Hydroforming of Defects-Free Tubular Metallic Parts". 14th International Conference on Material Forming Esaform, 2011 Proceedings 1353 (2011): 1689-1694.
    10.1063/1.3589759
  203. Gentil, F.; Parente, M.; Martins, P.; Garbe, C.; Jorge, R. N.; Ferreira, A.; Tavares, Joao Manuel R. S.. "The influence of the mechanical behaviour of the middle ear ligaments: a finite element analysis". Proceedings of the Institution of Mechanical Engineers Part H-Journal of Engineering in Medicine 225 H1 (2011): 68-76.
    10.1243/09544119JEIM783
  204. Dinis, L. M. J. S.; Natal Jorge, R. M.; Belinha, J.. "Static and dynamic analysis of laminated plates based on an unconstrained third order theory and using a radial point interpolator meshless method". Computers & Structures 89 19-20 (2011): 1771-1784.
    10.1016/j.compstruc.2010.10.015
  205. Dinis, L. M. J. S.; Natal Jorge, R. M.; Belinha, J.; Menary, G. "The Natural Neighbour Radial Point Interpolation Meshless Method Applied to the Non-Linear Analysis". 14th International Conference on Material Forming Esaform, 2011 Proceedings 1353 (2011): 1175-1178.
    10.1063/1.3589675
  206. Martins, Pedro A. L. S.; Silva Filho, Agnaldo Lopes; Rodrigues Maciel Fonseca, Andrea Moura; Santos, Agostinho; Santos, Liliana; Mascarenhas, Teresa; Natal Jorge, Renato M.; Ferreira, Antonio J. M.. "Uniaxial mechanical behavior of the human female bladder". International Urogynecology Journal 22 8 (2011): 991-995.
    10.1007/s00192-011-1409-0
  207. Neves, A.M.A.; Driscoll, T.A.; Heryudono, A.R.H.; Ferreira, A.J.M.; Soares, C.M.M.; Jorge, R.M.N.. "Adaptive methods for analysis of composite plates with radial basis functions". Mechanics of Advanced Materials and Structures 18 6 (2011): 420-430. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052626143&partnerID=MN8TOARS.
    10.1080/15376494.2010.528155
  208. Dinis, L.M.J.S.; Natal Jorge, R.M.; Belinha, J.. "A natural neighbour meshless method with a 3D shell-like approach in the dynamic analysis of thin 3D structures". Thin-Walled Structures 49 1 (2011): 185-196. http://www.scopus.com/inward/record.url?eid=2-s2.0-78649491024&partnerID=MN8TOARS.
    10.1016/j.tws.2010.09.023
  209. Peña, E.; Martins, P.; Mascarenhas, T.; Natal Jorge, R.M.; Ferreira, A.; Doblaré, M.; Calvo, B.. "Mechanical characterization of the softening behavior of human vaginal tissue". Journal of the Mechanical Behavior of Biomedical Materials 4 3 (2011): 275-283. http://www.scopus.com/inward/record.url?eid=2-s2.0-79751526103&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2010.10.006
  210. Ferreira, A.J.M.; Roque, C.M.C.; Neves, A.M.A.; Jorge, R.M.N.; Soares, C.M.M.; Liew, K.M.. "Buckling and vibration analysis of isotropic and laminated plates by radial basis functions". Composites Part B: Engineering 42 3 (2011): 592-606. http://www.scopus.com/inward/record.url?eid=2-s2.0-79951558624&partnerID=MN8TOARS.
    10.1016/j.compositesb.2010.08.001
  211. Ferreira, A.J.M.; Roque, C.M.C.; Neves, A.M.A.; Jorge, R.M.N.; Soares, C.M.M.; Reddy, J.N.. "Buckling analysis of isotropic and laminated plates by radial basis functions according to a higher-order shear deformation theory". Thin-Walled Structures 49 7 (2011): 804-811. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955708686&partnerID=MN8TOARS.
    10.1016/j.tws.2011.02.005
  212. Neves, A.M.A.; Ferreira, A.J.M.; Carrera, E.; Roque, C.M.C.; Cinefra, M.; Jorge, R.M.N.; Soares, C.M.M.. "Bending of FGM plates by a sinusoidal plate formulation and collocation with radial basis functions". Mechanics Research Communications 38 5 (2011): 368-371. http://www.scopus.com/inward/record.url?eid=2-s2.0-79959981026&partnerID=MN8TOARS.
    10.1016/j.mechrescom.2011.04.011
  213. Roque, C.M.C.; Ferreira, A.J.M.; Neves, A.M.A.; Soares, C.M.M.; Reddy, J.N.; Jorge, R.M.N.. "Transient analysis of composite plates by radial basis functions in a pseudospectral framework". Computers and Structures 89 1-2 (2011): 161-169. http://www.scopus.com/inward/record.url?eid=2-s2.0-78449253045&partnerID=MN8TOARS.
    10.1016/j.compstruc.2010.08.012
  214. Roque, C.M.C.; Ferreira, A.J.M.; Neves, A.M.A.; Soares, C.M.M.; Reddy, J.N.; Jorge, R.M.N.. "Transient analysis of composite and sandwich plates by radial basis functions*". Journal of Sandwich Structures and Materials 13 6 (2011): 681-704. http://www.scopus.com/inward/record.url?eid=2-s2.0-82355170017&partnerID=MN8TOARS.
    10.1177/1099636211419132
  215. Ma, Z.; Jorge, R.N.; Mascarenhas, T.; Tavares, J.M.R.S.. "Novel approach to segment the inner and outer boundaries of the bladder wall in T2-weighted magnetic resonance images". Annals of Biomedical Engineering 39 8 (2011): 2287-2297. http://www.scopus.com/inward/record.url?eid=2-s2.0-80051545701&partnerID=MN8TOARS.
    10.1007/s10439-011-0324-3
  216. Martins, P.A.L.S.; Jorge, R.M.N.; Ferreia, A.J.M.; Saleme, C.S.; Roza, T.; Parente, M.M.P.; Pinotti, M.; et al. "Vaginal tissue properties versus increased intra-abdominal pressure: A preliminary biomechanical study". Gynecologic and Obstetric Investigation 71 3 (2011): 145-150. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955483026&partnerID=MN8TOARS.
    10.1159/000315160
  217. Santos, S.; Parente, M.P.L.; Vieira, A.A.; Baptista, A.M.; Jorge, R.M.N.. "A simulation study of the effect of some parameters in thermal analysis of creep feed grinding". International Journal of Material Forming 3 SUPPL. 1 (2010): 911-914. http://www.scopus.com/inward/record.url?eid=2-s2.0-78651528455&partnerID=MN8TOARS.
    10.1007/s12289-010-0916-8
  218. Ma, Z.; Jorge, R.N.M.; Tavares, J.M.R.S.. "A shape guided C-V model to segment the levator ani muscle in axial magnetic resonance images". Medical Engineering and Physics 32 7 (2010): 766-774. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955281815&partnerID=MN8TOARS.
    10.1016/j.medengphy.2010.05.002
  219. Ma, Z.; Tavares, J.M.R.S.; Jorge, R.N.; Mascarenhas, T.. "A review of algorithms for medical image segmentation and their applications to the female pelvic cavity". Computer Methods in Biomechanics and Biomedical Engineering 13 2 (2010): 235-246. http://www.scopus.com/inward/record.url?eid=2-s2.0-77954713643&partnerID=MN8TOARS.
    10.1080/10255840903131878
  220. Dinis, L.M.J.S.; Jorge, R.M.N.; Belinha, J.. "A 3D shell-like approach using a natural neighbour meshless method: Isotropic and orthotropic thin structures". Composite Structures 92 5 (2010): 1132-1142. http://www.scopus.com/inward/record.url?eid=2-s2.0-73449148316&partnerID=MN8TOARS.
    10.1016/j.compstruct.2009.10.014
  221. Peña, E.; Calvo, B.; Martínez, M.A.; Martins, P.; Mascarenhas, T.; Jorge, R.M.N.; Ferreira, A.; Doblaré, M.. "Experimental study and constitutive modeling of the viscoelastic mechanical properties of the human prolapsed vaginal tissue". Biomechanics and Modeling in Mechanobiology 9 1 (2010): 35-44. http://www.scopus.com/inward/record.url?eid=2-s2.0-74349111820&partnerID=MN8TOARS.
    10.1007/s10237-009-0157-2
  222. Silva-Filho, A.L.; Saleme, C.S.; Roza, T.; Martins, P.A.L.S.; Parente, M.M.P.; Pinotti, M.; Mascarenhas, T.; Ferreira, A.J.M.; Jorge, R.M.N.. "Evaluation of pelvic floor muscle cross-sectional area using a 3D computer model based on MRI in women with and without prolapse". European Journal of Obstetrics Gynecology and Reproductive Biology 153 1 (2010): 110-111. http://www.scopus.com/inward/record.url?eid=2-s2.0-77958180182&partnerID=MN8TOARS.
    10.1016/j.ejogrb.2010.07.005
  223. Roque, C.M.C.; Ferreira, A.J.M.; Neves, A.M.A.; Fasshauer, G.E.; Soares, C.M.M.; Jorge, R.M.N.. "Dynamic analysis of functionally graded plates and shells by radial basis functions". Mechanics of Advanced Materials and Structures 17 8 (2010): 636-652. http://www.scopus.com/inward/record.url?eid=2-s2.0-78649495389&partnerID=MN8TOARS.
    10.1080/15376494.2010.518932
  224. Parente, M.P.; Natal Jorge, R.M.; Mascarenhas, T.; Fernandes, A.A.; Silva-Filho, A.L.. "Computational modeling approach to study the effects of fetal head flexion during vaginal delivery". American Journal of Obstetrics and Gynecology 203 3 (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-77956343628&partnerID=MN8TOARS.
    10.1016/j.ajog.2010.03.038
  225. Dinis, L.M.J.S.; Jorge, R.M.; Belinha, J.. "Composite laminated plates: A 3D natural neighbor radial point interpolation method approach". Journal of Sandwich Structures and Materials 12 2 (2010): 119-138. http://www.scopus.com/inward/record.url?eid=2-s2.0-77649264061&partnerID=MN8TOARS.
    10.1177/1099636209104735
  226. Ferreira, A.J.M.; Roque, C.M.C.; Neves, A.M.A.; Jorge, R.M.N.; Soares, C.M.M.. "Analysis of plates on Pasternak foundations by radial basis functions". Computational Mechanics 46 6 (2010): 791-803. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956729740&partnerID=MN8TOARS.
    10.1007/s00466-010-0518-9
  227. Dinis, L.M.J.S.; Jorge, R.M.N.; Belinha, J.. "An unconstrained third-order plate theory applied to functionally graded plates using a meshless method". Mechanics of Advanced Materials and Structures 17 2 (2010): 108-133. http://www.scopus.com/inward/record.url?eid=2-s2.0-77149130531&partnerID=MN8TOARS.
    10.1080/15376490903249925
  228. Roque, C.M.C.; Ferreira, A.J.M.; Jorge, R.M.N.. "An optimized shape parameter radial basis function formulation for composite and sandwich plates using higher order formulations". Journal of Sandwich Structures and Materials 12 3 (2010): 279-306. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952129118&partnerID=MN8TOARS.
    10.1177/1099636209104516
  229. Tavares, J.M.R.S.; Jorge, R.M.N.. "International journal of tomography and statistics special volume on image processing-II". International Journal of Tomography and Statistics 14 S10 (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-79751496565&partnerID=MN8TOARS.
  230. Tavares, J.M.R.S.; Natal Jorge, R.M.. "International journal of tomography and statistics special volume on image processing-I". International Journal of Tomography and Statistics 13 W10 (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-77955995255&partnerID=MN8TOARS.
  231. Da Silva-Filho, A.L.; Martins, P.A.L.S.; Parente, M.P.; Saleme, C.S.; Roza, T.; Pinotti, M.; Mascarenhas, T.; Jorge, R.M.N.. "Translation of biomechanics research to urogynecology". Archives of Gynecology and Obstetrics 282 2 (2010): 149-155. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956467221&partnerID=MN8TOARS.
    10.1007/s00404-010-1396-2
  232. Parente, M.P.; Natal Jorge, R.M.; Mascarenhas, T.; Silva-Filho, A.L.. "The influence of pelvic muscle activation during vaginal delivery". Obstetrics and Gynecology 115 4 (2010): 804-808. http://www.scopus.com/inward/record.url?eid=2-s2.0-77949897017&partnerID=MN8TOARS.
    10.1097/AOG.0b013e3181d534cd
  233. Mata, H.; Jorge, R.N.; Fernandes, A.A.; Valente, R.A.F.. "Study of sandwich shells with metallic foam cores". International Journal of Material Forming 3 SUPPL. 1 (2010): 903-906. http://www.scopus.com/inward/record.url?eid=2-s2.0-78651560097&partnerID=MN8TOARS.
    10.1007/s12289-010-0914-x
  234. Martins, P.; Peña, E.; Calvo, B.; Doblaré, M.; Mascarenhas, T.; Jorge, R.N.; Ferreira, A.. "Prediction of nonlinear elastic behaviour of vaginal tissue: Experimental results and model formulation". Computer Methods in Biomechanics and Biomedical Engineering 13 3 (2010): 327-337. http://www.scopus.com/inward/record.url?eid=2-s2.0-77954679403&partnerID=MN8TOARS.
    10.1080/10255840903208197
  235. Tavares, J.M.R.S.; Natal Jorge, R.M.. "Image processing and analysis in biomechanics". Eurasip Journal on Advances in Signal Processing 2010 (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-77951531488&partnerID=MN8TOARS.
    10.1155/2010/287929
  236. Aguiar Vieira, A.; Monteiro Baptista, A.; Lages Parente, M.P.; Natal Jorge, R.M.. "On the temperature field during superficial grinding: An experimental study". International Journal of Advanced Manufacturing Technology 40 11-12 (2009): 1084-1092. http://www.scopus.com/inward/record.url?eid=2-s2.0-60749094577&partnerID=MN8TOARS.
    10.1007/s00170-008-1442-4
  237. Calvo, B.; Peña, E.; Martins, P.; Mascarenhas, T.; Doblaré, M.; Natal Jorge, R.M.; Ferreira, A.. "On modelling damage process in vaginal tissue". Journal of Biomechanics 42 5 (2009): 642-651. http://www.scopus.com/inward/record.url?eid=2-s2.0-61849125853&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2008.12.002
  238. Valente, R.A.F.; de Sousa, R.J.A.; Jorge, R.M.N.. "Enhanced finite element formulations on the numerical simulation of tailor-welded hydroformed products". International Journal of Material Forming 2 SUPPL. 1 (2009): 927-929. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856042912&partnerID=MN8TOARS.
    10.1007/s12289-009-0580-z
  239. Dinis, L.M.J.S.; Natal Jorge, R.M.; Belinha, J.. "Large deformation applications with the radial natural neighbours interpolators". CMES - Computer Modeling in Engineering and Sciences 44 1 (2009): 1-34. http://www.scopus.com/inward/record.url?eid=2-s2.0-76249093619&partnerID=MN8TOARS.
  240. Parente, M.P.L.; Natal Jorge, R.M.; Mascarenhas, T.; Fernandes, A.A.; Martins, J.A.C.. "The influence of the material properties on the biomechanical behavior of the pelvic floor muscles during vaginal delivery". Journal of Biomechanics 42 9 (2009): 1301-1306. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349282331&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2009.03.011
  241. Parente, M.P.L.; Jorge, R.M.N.; Mascarenhas, T.; Fernandes, A.A.; Martins, J.A.C.. "The influence of an occipito-posterior malposition on the biomechanical behavior of the pelvic floor". European Journal of Obstetrics Gynecology and Reproductive Biology 144 SUPPL 1 (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-67650110649&partnerID=MN8TOARS.
    10.1016/j.ejogrb.2009.02.033
  242. Neves, A.M.A.; Roque, C.M.C.; Ferreira, A.J.M.; Soares, C.M.M.; Jorge, R.M.N.. "Solving time-dependent problems by an RBF-PS method with an optimal shape parameter". Journal of Physics: Conference Series 181 1 (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-77957034275&partnerID=MN8TOARS.
    10.1088/1742-6596/181/1/012053
  243. Afonso, J.S.; Jorge, R.M.N.; Martins, P.S.; Soldi, M.D.S.; Alves, O.L.; Patricio, B.; Mascarenhas, T.; Sartori, M.G.F.; Girao, M.J.B.C.. "Structural and thermal properties of polypropylene mesh used in treatment of stress urinary incontinence". Acta of Bioengineering and Biomechanics 11 3 (2009): 27-33. http://www.scopus.com/inward/record.url?eid=2-s2.0-76149083297&partnerID=MN8TOARS.
  244. Dinis, L. M. J. S.; Jorge, R. M. Natal; Belinha, J.. "The natural neighbour radial point interpolation method: dynamic applications". Engineering Computations 26 7-8 (2009): 911-949.
    10.1108/02644400910996835
  245. Dinis, L.M.J.S.; Natal Jorge, R.M.; Belinha, J.. "Analysis of plates and laminates using the natural neighbour radial point interpolation method". Engineering Analysis with Boundary Elements 32 3 (2008): 267-279. http://www.scopus.com/inward/record.url?eid=2-s2.0-38349132198&partnerID=MN8TOARS.
    10.1016/j.enganabound.2007.08.006
  246. Dinis, L.M.J.S.; Natal Jorge, R.M.; Belinha, J.. "Analysis of laminated plates with Third Order Plate Theory and with the Natural Neighbour Radial Point Interpolation method". Civil-Comp Proceedings 88 (2008): http://www.scopus.com/inward/record.url?eid=2-s2.0-84893908767&partnerID=MN8TOARS.
  247. Martins, P.; Mascarenhas, T.; Natal, R.; Ferreira, A.; Fernandes, A.; Costa, F.; Patrício, B.. "UIJ - Influence of age on the characterization of elasticity of prolapsed vaginal tissue on a postmenopausal women group". UroToday International Journal 1 1 SUPPL. (2008): http://www.scopus.com/inward/record.url?eid=2-s2.0-84855981531&partnerID=MN8TOARS.
    10.3834/uij.1939-4810.2008.06.16
  248. Valente, R.A.F.; Jorge, R.M.N.; Roque, A.P.; Parente, M.P.L.; Fernandes, A.A.. "Simulation of dissimilar tailor-welded tubular hydroforming processes using EAS-based solid finite elements". International Journal of Advanced Manufacturing Technology 37 7-8 (2008): 670-689. http://www.scopus.com/inward/record.url?eid=2-s2.0-42649114524&partnerID=MN8TOARS.
    10.1007/s00170-007-1015-y
  249. Afonso, J.S.; Martins, P.A.L.S.; Girao, M.J.B.C.; Jorge, R.M.N.; Ferreira, A.J.M.; Mascarenhas, T.; Fernandes, A.A.; et al. "Erratum: Mechanical properties of polypropylene mesh used in pelvic floor repair (International Urogynecology Journal 10.1007/s00192-007-0446-1)". International Urogynecology Journal and Pelvic Floor Dysfunction 19 3 (2008): http://www.scopus.com/inward/record.url?eid=2-s2.0-39049087597&partnerID=MN8TOARS.
    10.1007/s00192-007-0518-2
  250. Gonçalves, P.C.T.; Tavares, J.M.R.S.; Jorge, R.M.N.. "Segmentation and simulation of objects represented in images using physical principles". CMES - Computer Modeling in Engineering and Sciences 32 1 (2008): 45-55. http://www.scopus.com/inward/record.url?eid=2-s2.0-55349127101&partnerID=MN8TOARS.
  251. Parente, M. P. L.; Jorge, R. M. Natal; Mascarenhas, T.; Fernandes, A. A.; Martins, J. A. C.. "Deformation of the pelvic floor muscles during a vaginal delivery". International Urogynecology Journal 19 1 (2008): 65-71.
    10.1007/s00192-007-0388-7
  252. Afonso, J. S.; Martins, P. A. L. S.; Girao, M. J. B. C.; Jorge, R. M. Natal; Ferreira, A. J. M.; Mascarenhas, T.; Fernandes, A. A.; et al. "Mechanical properties of polypropylene mesh used in pelvic floor repair". International Urogynecology Journal 19 3 (2008): 375-380.
    10.1007/s00192-007-0446-1
  253. Dinis, L.M.J.S.; Natal Jorge, R.M.; Belinha, J.. "Analysis of 3D solids using the natural neighbour radial point interpolation method". Computer Methods in Applied Mechanics and Engineering 196 13-16 (2007): 2009-2028. http://www.scopus.com/inward/record.url?eid=2-s2.0-33846298922&partnerID=MN8TOARS.
    10.1016/j.cma.2006.11.002
  254. Roque, C.M.C.; Ferreira, A.J.M.; Jorge, R.M.N.. "A radial basis function approach for the free vibration analysis of functionally graded plates using a refined theory". Journal of Sound and Vibration 300 3-5 (2007): 1048-1070. http://www.scopus.com/inward/record.url?eid=2-s2.0-33845871458&partnerID=MN8TOARS.
    10.1016/j.jsv.2006.08.037
  255. Tavares, J.M.R.S.; Jorge, R.M.N.. "International Journal of Simulation Modelling: Editorial". International Journal of Simulation Modelling 6 2 (2007): http://www.scopus.com/inward/record.url?eid=2-s2.0-34250708450&partnerID=MN8TOARS.
  256. Natal Jorge, R.M.; Roque, A.P.; Valente, R.A.F.; Parente, M.P.L.; Fernandes, A.A.. "Study of hydroformed tailor-welded tubular parts with dissimilar thickness". Journal of Materials Processing Technology 184 1-3 (2007): 363-371. http://www.scopus.com/inward/record.url?eid=2-s2.0-33846826815&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2006.12.002
  257. Recio, D.P.; Natal Jorge, R.M.; Dinis, L.M.S.. "On the use of element-free Galerkin Method for problems involving incompressibility". Engineering Analysis with Boundary Elements 31 2 (2007): 103-115. http://www.scopus.com/inward/record.url?eid=2-s2.0-33846036268&partnerID=MN8TOARS.
    10.1016/j.enganabound.2006.08.007
  258. Jorge, R.M.N.; Valente, R.A.F.; Roque, A.P.; Parente, M.P.L.; Fernandes, A.A.. "Numerical simulation of hydroforming process involving a tubular blank with dissimilar thickness". Materials and Manufacturing Processes 22 2 (2007): 286-291. http://www.scopus.com/inward/record.url?eid=2-s2.0-33847231311&partnerID=MN8TOARS.
    10.1080/10426910601134195
  259. Ferreira, A.J.M.; Roque, C.M.C.; Jorge, R.M.N.. "Natural frequencies of FSDT cross-ply composite shells by multiquadrics". Composite Structures 77 3 (2007): 296-305. http://www.scopus.com/inward/record.url?eid=2-s2.0-33750632887&partnerID=MN8TOARS.
    10.1016/j.compstruct.2005.07.009
  260. Cabral, J.P.; Natal Jorge, R.M.. "Compressibility and shell failure in the European Atlantic Patella limpets". Marine Biology 150 4 (2007): 585-597. http://www.scopus.com/inward/record.url?eid=2-s2.0-33845652659&partnerID=MN8TOARS.
    10.1007/s00227-006-0379-0
  261. Ferreira, A.J.M.; Roque, C.M.C.; Jorge, R.M.N.; Fasshauer, G.E.; Batra, R.C.. "Analysis of functionally graded plates by a robust meshless method". Mechanics of Advanced Materials and Structures 14 8 (2007): 577-587. http://www.scopus.com/inward/record.url?eid=2-s2.0-36649014654&partnerID=MN8TOARS.
    10.1080/15376490701672732
  262. Gentil, F; Natal Jorge, RMN; Mendes Ferreira, AJM; Lages Parente, MPL; Moreira, M; de Almeida, E. "STUDY OF THE EFFECT OF FRICTION BETWEEN THE OSSICLES OF THE MIDDLE EAR". REVISTA INTERNACIONAL DE METODOS NUMERICOS PARA CALCULO Y DISENO EN INGENIERIA (2007):
  263. Alves de Sousa, R.J.; Cardoso, R.P.R.; Fontes Valente, R.A.; Yoon, J.-W.; Grácio, J.J.; Natal Jorge, R.M.. "A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness - Part II: Nonlinear applications". International Journal for Numerical Methods in Engineering 67 2 (2006): 160-188. http://www.scopus.com/inward/record.url?eid=2-s2.0-33745881363&partnerID=MN8TOARS.
    10.1002/nme.1609
  264. Martins, P.A.L.S.; Jorge, R.M.N.; Ferreira, A.J.M.. "A comparative study of several material models for prediction of hyperelastic properties: Application to silicone-rubber and soft tissues". Strain 42 3 (2006): 135-147. http://www.scopus.com/inward/record.url?eid=2-s2.0-33746217639&partnerID=MN8TOARS.
    10.1111/j.1475-1305.2006.00257.x
  265. Ferreira, A.J.M.; Roque, C.M.C.; Jorge, R.M.N.. "Static and free vibration analysis of composite shells by radial basis functions". Engineering Analysis with Boundary Elements 30 9 (2006): 719-733. http://www.scopus.com/inward/record.url?eid=2-s2.0-33747046429&partnerID=MN8TOARS.
    10.1016/j.enganabound.2006.05.002
  266. Parente, M.P.L.; Fontes Valente, R.A.; Natal Jorge, R.M.; Cardoso, R.P.R.; Alves de Sousa, R.J.. "Sheet metal forming simulation using EAS solid-shell finite elements". Finite Elements in Analysis and Design 42 13 (2006): 1137-1149. http://www.scopus.com/inward/record.url?eid=2-s2.0-33746394597&partnerID=MN8TOARS.
    10.1016/j.finel.2006.04.005
  267. Ferreira, A.J.M.; Batra, R.C.; Roque, C.M.C.; Qian, L.F.; Jorge, R.M.N.. "Natural frequencies of functionally graded plates by a meshless method". Composite Structures 75 1-4 (2006): 593-600. http://www.scopus.com/inward/record.url?eid=2-s2.0-33745756672&partnerID=MN8TOARS.
    10.1016/j.compstruct.2006.04.018
  268. Ferreira, A.J.M.; Roque, C.M.C.; Jorge, R.M.N.. "Modelling cross-ply laminated elastic shells by a higher-order theory and multiquadrics". Computers and Structures 84 19-20 (2006): 1288-1299. http://www.scopus.com/inward/record.url?eid=2-s2.0-33744532240&partnerID=MN8TOARS.
    10.1016/j.compstruc.2006.01.021
  269. Recio, D.P.; Natal Jorge, R.M.; Dinis, L.M.S.. "Locking and hourglass phenomena in an element-free Galerkin context: The B-bar method with stabilization and an enhanced strain method". International Journal for Numerical Methods in Engineering 68 13 (2006): 1329-1357. http://www.scopus.com/inward/record.url?eid=2-s2.0-33845876885&partnerID=MN8TOARS.
    10.1002/nme.1741
  270. Roque, C.M.C.; Ferreira, A.J.M.; Jorge, R.M.N.. "Free vibration analysis of composite and sandwich plates by a trigonometric layerwise deformation theory and radial basis functions". Journal of Sandwich Structures and Materials 8 6 (2006): 497-515. http://www.scopus.com/inward/record.url?eid=2-s2.0-33750048188&partnerID=MN8TOARS.
    10.1177/1099636206065873
  271. Roque, CMC; Ferreira, AJM; Jorge, RMN; Thomsen, OT; Bozhevolnaya, E; Lyckegaard, A. "Modelling of composite and sandwich plates by a trigonometric layerwise theory and multiquadrics". Sandwich Structures7: Advancing with Sandwich Structures and Materials (2005): 231-240.
    10.1007/1-4020-3848-8_23
  272. Ferreira, AJM; Roque, CMC; Jorge, RMN; Kansa, EJ. "Static deformations and vibration analysis of composite and sandwich plates using a layerwise theory and multiquadrics discretizations". Engineering Analysis With Boundary Elements 29 12 (2005): 1104-1114.
    10.1016/j.enganabound.2005.07.004
  273. D'Aulignac, D.; Martins, J.A.C.; Pires, E.B.; Mascarenhas, T.; Jorge, R.M.N.. "A shell finite element model of the pelvic floor muscles". Computer Methods in Biomechanics and Biomedical Engineering 8 5 (2005): 339-347. http://www.scopus.com/inward/record.url?eid=2-s2.0-33644694662&partnerID=MN8TOARS.
    10.1080/10255840500405378
  274. Alves de Sousa, R.J.; Cardoso, R.P.R.; Fontes Valente, R.A.; Yoon, J.-W.; Grácio, J.J.; Natal Jorge, R.M.. "A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness: Part I - Geometrically linear applications". International Journal for Numerical Methods in Engineering 62 7 (2005): 952-977. http://www.scopus.com/inward/record.url?eid=2-s2.0-14344262116&partnerID=MN8TOARS.
    10.1002/nme.1226
  275. Roque, C.M.C.; Ferreira, A.J.M.; Jorge, R.M.N.. "Modelling of composite and sandwich plates by a trigonometric layerwise deformation theory and radial basis functions". Composites Part B: Engineering 36 8 (2005): 559-572. http://www.scopus.com/inward/record.url?eid=2-s2.0-23944473247&partnerID=MN8TOARS.
    10.1016/j.compositesb.2005.05.003
  276. Ferreira, A.J.M.; Roque, C.M.C.; Jorge, R.M.N.. "Free vibration analysis of symmetric laminated composite plates by FSDT and radial basis functions". Computer Methods in Applied Mechanics and Engineering 194 39-41 (2005): 4265-4278. http://www.scopus.com/inward/record.url?eid=2-s2.0-21044441811&partnerID=MN8TOARS.
    10.1016/j.cma.2004.11.004
  277. Fontes Valente, R.A.; Parente, M.P.L.; Natal Jorge, R.M.; César de Sá, J.M.A.; Grácio, J.J.. "Enhanced transverse shear strain shell formulation applied to large elasto-plastic deformation problems". International Journal for Numerical Methods in Engineering 62 10 (2005): 1360-1398. http://www.scopus.com/inward/record.url?eid=2-s2.0-14844290888&partnerID=MN8TOARS.
    10.1002/nme.1231
  278. Ferreira, A.J.M.; Roque, C.M.C.; Jorge, R.M.N.. "Analysis of composite plates by trigonometric shear deformation theory and multiquadrics". Computers and Structures 83 27 (2005): 2225-2237. http://www.scopus.com/inward/record.url?eid=2-s2.0-24044511137&partnerID=MN8TOARS.
    10.1016/j.compstruc.2005.04.002
  279. Valente, R.A.F.; De Sousa, R.J.A.; Jorge, R.M.N.. "An enhanced strain 3D element for large deformation elastoplastic thin-shell applications". Computational Mechanics 34 1 (2004): 38-52. http://www.scopus.com/inward/record.url?eid=2-s2.0-4043059983&partnerID=MN8TOARS.
    10.1007/s00466-004-0551-7
  280. Fontes Valente, R.A.; Natal Jorge, R.M.; Cardoso, R.P.R.; César de Sá, J.M.A.; Grácio, J.J.A.. "On the use of an enhanced transverse shear strain shell element for problems involving large rotations". Computational Mechanics 30 4 (2003): 286-296. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037623347&partnerID=MN8TOARS.
    10.1007/s00466-002-0388-x
  281. Pires, F.M.A.; De Sá, J.M.A.C.; Sousa, L.C.; Jorge, R.M.N.. "Numerical modelling of ductile plastic damage in bulk metal forming". International Journal of Mechanical Sciences 45 2 (2003): 273-294. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038625321&partnerID=MN8TOARS.
    10.1016/S0020-7403(03)00051-1
  282. de Sousa, RJA; Jorge, RMN; Valente, RAF; de Sa, JMAC. "A new volumetric and shear locking-free 3D enhanced strain element". Engineering Computations 20 7-8 (2003): 896-925.
    10.1108/02644400310502036
  283. De César Sá, J.M.A.; Natal Jorge, R.M.; Fontes Valente, R.A.; Almeida Areias, P.M.. "Development of shear locking-free shell elements using an enhanced assumed strain formulation". International Journal for Numerical Methods in Engineering 53 7 (2002): 1721-1750. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037051074&partnerID=MN8TOARS.
    10.1002/nme.360
  284. Csar De S, J.M.A.; Areias, P.M.A.; Jorge, R.M.N.. "Quadrilateral elements for the solution of elasto-plastic finite strain problems". International Journal for Numerical Methods in Engineering 51 8 (2001): 883-917. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035796838&partnerID=MN8TOARS.
    10.1002/nme.183
  285. Natal Jorge, R.M.; Fernandes, A.A.. "Design of a steam-heated sterilizer based on finite element method stress analysis". International Journal of Pressure Vessels and Piping 78 9 (2001): 627-635. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035940760&partnerID=MN8TOARS.
    10.1016/S0308-0161(01)00078-3
  286. Natal Jorge, R.M.; Cardoso, R.P.R.; César De Sá, J.M.A.. "A quadrilateral mesh generator for adaptive procedures in bulk forming processes". Engineering Computations (Swansea, Wales) 17 8 (2000): 950-969. http://www.scopus.com/inward/record.url?eid=2-s2.0-0008360543&partnerID=MN8TOARS.
  287. Jorge, RMN; Cardoso, RPR; de Sa, JMAC. "A quadrilateral mesh generator for adaptive procedures in bulk forming processes". Engineering Computations 17 8 (2000): 950-969.
    10.1108/02644400010360884
  288. César De Sá, J.M.A.; Natal Jorge, R.M.. "New enhanced strain elements for incompressible problems". International Journal for Numerical Methods in Engineering 44 2 (1999): 229-248. http://www.scopus.com/inward/record.url?eid=2-s2.0-0040142014&partnerID=MN8TOARS.
Capítulo de livro
  1. M. I. A. Barbosa; J. Belinha; R. M. Natal Jorge; A. Carvalho. "Simulation of Cell Proliferation Using a Meshless Tool". 2023.
    10.1007/978-3-031-10015-4_11
  2. M. I. A. Barbosa; J. Belinha; R. M. Natal Jorge; A. X. Carvalho. "The Effect of Oxygen and Glucose in the Cell Proliferation Process Analysed with a Meshless Method". 2023.
    10.1007/978-3-031-47790-4_41
  3. Carlos A. Andreucci; Elza M. M. Fonseca; Renato M. Natal Jorge. "BKS Drill-and-Seal Technique: Innovative Design and Aseptic Bone Implant". 2023.
    10.1007/978-3-031-47790-4_34
  4. M. I. A. Barbosa; J. Belinha; R. M. Natal Jorge; A. X. Carvalho. "Simulation of Cell Proliferation Using a Particle Method". 2023.
    10.1007/978-3-031-47790-4_35
  5. Rodrigues, DES; Belinha, J; Pires, FMA; Jorge, RMN; Dinis, LMJS. "Homogenizing the Elastic Properties of Composite Material Using the NNRPIM". 2021.
    10.1016/b978-0-12-819724-0.00087-2
  6. Patrícia Raposo; Behzad V. Farahani; José A.F.O. Correia; Jorge Belinha; Abílio M.P. De Jesus; Renato N. Jorge; Rui Calçada. "A Stress Intensity Factor Study for a Pressure Vessel CT Specimen Using Finite Element Method". 181-186. Springer New York, 2019.
    10.1007/978-3-030-13980-3_24
  7. D. E. S. Rodrigues; J. Belinha; R. M. Natal Jorge; L. M. J. S. Dinis. "The Natural Neighbour Radial Point Interpolation Method to Predict the Compression and Traction Behavior of Thermoplastics". 393-399. Springer New York, 2019.
    10.1007/978-3-030-13980-3_50
  8. D. E. S. Rodrigues; J. Belinha; R. M. Natal Jorge; L. M. J. S. Dinis. "The Elasto-plastic Analysis of Polymers Subject to Traction and Compression Using Advanced Discretization Techniques". 401-406. Springer New York, 2019.
    10.1007/978-3-030-13980-3_51
  9. Santos, CF; Belinha, J; Gentil, F; Parente, M; Jorge, RMN. "Biomechanics of the vestibular system: A numerical simulation". 2019.
    10.1016/b978-0-12-816390-0.00002-9
  10. Fidalgo, DS; Areias, B; Sousa, LC; Parente, M; Jorge, RN; Sousa, H; Goncalves, JM. "Minimally Invasive Transforaminal Lumbar Interbody Fusion Surgery at Level L5-S1". 2019.
    10.1007/978-3-030-32040-9_47
  11. Oliveira D.A.; Silva M.E.T.; Pouca M.V.; Parente M.P.L.; Mascarenhas T.; Natal Jorge R.M.. "Biomechanical Simulation of Vaginal Childbirth: The Colors of the Pelvic Floor Muscles". 2019.
    10.1007/978-3-030-15923-8_1
  12. Oliveira, D; Parente, M; Mascarenhas, T; Natal Jorge, R. "Biomechanical analysis of the damage in the pelvic floor muscles during childbirth". 2018.
    10.1007/978-3-319-71574-2_11
  13. Silva, E; Brandão, S; Parente, M; Mascarenhas, T; Natal Jorge, R. "Searching for the tissue mechanical properties in pelvic floor dysfunction by computational modeling". 2018.
    10.1007/978-3-319-71574-2_16
  14. Peyroteo, M; Belinha, J; Dinis, L; Jorge, RN. "The mechanologic bone tissue remodeling analysis: A comparison between mesh-depending and meshless methods". 2017.
    10.1016/b978-0-12-811718-7.00017-4
  15. Ferreira, Luis A.; Araujo, Francisco M.; Mascarenhas, Teresa; Jorge, Renato M. Natal; Fernandes, Antnio A.; Gannot, I. "Dynamic assessment of women pelvic floor function by using a fiber Bragg grating sensor system - art. no. 60830H". H830-H830. 2006.
    10.1117/12.646824
Edição de livro
  1. Giamberardino, PD; Iacoviello, D; Tavares, JMRS; Jorge, RMN. Computational Modelling of Objects Represented in Images - Fundamentals, Methods and Applications III, Third International Symposium, CompIMAGE 2012, Rome, Italy, September 5-7, 2012. 2012.
  2. Barneva, RP; Brimkov, VE; Hauptman, HA; Natal Jorge, RM; Tavares, JMRS. Computational Modeling of Objects Represented in Images, Second International Symposium, CompIMAGE 2010, Buffalo, NY, USA, May 5-7, 2010. Proceedings. 2010.
    10.1007/978-3-642-12712-0
  3. Barneva, RP; Brimkov, VE; Natal Jorge, RM; Tavares, JMRS. Computational Modeling of Objects Represented in Images, Second International Symposium, CompIMAGE 2010, Buffalo, NY, USA, May 5-7, 2010. Special Track on Object Modeling, Algorithms and Applications. 2010.
Livro
  1. Areias, B.; Parente, M.P.L.; Gentil, F.; Natal Jorge, R.M.. A numerical study of fenestral otosclerosis. 2017.
    10.1007/978-3-319-50784-2_12
  2. Natal Jorge, R.; Brandão, S.; Da Roza, T.; Parente, M.; Mascarenhas, T.. Biomechanical Childbirth Simulations. 2016.
    10.1016/B978-0-12-803228-2.00021-0
  3. BrandÃo, S.; Parente, M.; Silva, A.R.; Da Roza, T.; Mascarenhas, T.; Ramos, I.; Natal Jorge, R.M.. The impairment of female pelvic ligaments and its relation with pelvic floor dysfunction: Biomechanical analysis. 2015.
    10.1007/978-3-319-15799-3_4
  4. Da Roza, T.; Brandão, S.; Mascarenhas, T.; Duarte, J.A.; Natal Jorge, R.M.. Pelvic floor muscles behavior in practitioners of high and low impact sports. 2015.
    10.1007/978-3-319-15799-3_5
  5. Teixeira, T.; Sousa, L.C.; Natal Jorge, R.M.; Parente, M.; GonÇalves, J.M.; Freitas, R.. Biomechanical study of the cervical spine. 2015.
    10.1007/978-3-319-15799-3_7
  6. Andrade, R.; Viana, R.; Viana, S.; da Roza, T.; Mascarenhas, T.; Natal Jorge, R.M.. What exists in the scientific literature about biomechanical models in pelvic floor?—a systematic review. 2015.
    10.1007/978-3-319-15799-3_3
  7. Ferreira, J.; Parente, M.; Natal Jorge, R.M.. Injury simulation of anterior cruciate ligament using isogeometric analysis. 2015.
    10.1007/978-3-319-15799-3_8
  8. Sousa, M.; Viana, R.; Viana, S.; Da Roza, T.; Azevedo, R.; AraÚjo, M.; Festas, C.; Mascarenhas, T.; Natal Jorge, R.M.. Effects of a pelvic floor muscle training in nulliparous athletes with urinary incontinence: biomechanical models protocol. 2015.
    10.1007/978-3-319-15799-3_6
  9. Mata, H.; Natal Jorge, R.; Santos, A.D.; Parente, M.P.L.; Valente, R.A.F.; Fernandes, A.A.. Study of formability of sandwich shells with metal foam cores based on punch penetration test. 2015.
    10.4028/www.scientific.net/KEM.651-653.1307
  10. Mata, H.; Natal Jorge, R.; Santos, A.D.; Parente, M.P.L.; Valente, R.A.F.; Fernandes, A.A.. Study of formability of sandwich shells with metal foam cores. 2013.
    10.4028/www.scientific.net/KEM.554-557.2252
  11. Tavares, JMR; Natal Jorge, RM. Topics in Medical Image Processing and Computational Vision. 2013.
    10.1007/978-94-007-0726-9
  12. Natal Jorge, RM; Tavares, JMRS; Pinotti Barbosa, M; Slade, A. Technologies for Medical Sciences. 2012.
    10.1007/978-94-007-4068-6
  13. Tavares, JMRS; Jorge, RMN. Computational Vision and Medical Image Processing. 2011.
    10.1007/978-94-007-0011-6
  14. Barneva, R.P.; Brimkov, V.E.; Hauptman, H.A.; Natal Jorge, R.M.; Tavares, J.M.R.S.. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics): Preface. 2010.
  15. De Jesus Simas Dinis, L.M.; Jorge, R.M.N.; Belinha, J.. The radial natural neighbours interpolators extended to elastoplasticity. 2009.
  16. Tavares, JMRS; Jorge, RMN. Advances in Computational Vision and Medical Image Processing. 2009.
    10.1007/978-1-4020-9086-8
  17. Martins, J.A.C.; Pato, M.P.M.; Pires, E.B.; Natal Jorge, R.M.; Parente, M.; Mascarenhas, T.. Finite element studies of the deformation of the pelvic floor. 2007.
    10.1196/annals.1389.019
Resumo em conferência
  1. Silva, E; Parente, M; Mascarenhas, T; Natal Jorge, RN. "A 3D computational model to analyze the temperature distribution induced by a transvaginal laser". 2018.
  2. Oliveira, D; Parente, M; Mascarenhas, T; Natal, R. "Contribution to the development of an innovative Clinical Decision Support System to optimize childbirth outcomes". 2018.
  3. Silva, E; Brandao, S; Parente, M; Mascarenhas, T; Jorge, RN. "Variation of elasticity in the pelvic floor muscles for incontinent and prolapsed women". 2017.
    10.1016/j.ejogrb.2017.01.035
  4. Souto, L; Talaia, P; Drummond, M; Jorge, R. "Facial stress points of an oronasal interface for noninvasive ventilation: A computer model analysis". 2013.
  5. Da Roza, T; Mascarenhas, T; De Araujo, M; Parente, M; Duarte, S; Loureiro, J; Natal Jorge, RN. "DISPLACEMENT OF THE LEVATOR ANI MUSCLE IN CONTINENT AND INCONTINENT FEMALE ATHLETE". 2011.
  6. Parente, M; Mascarenhas, T; Jorge, RN; Fernandes, A. "EVALUATION OF THE INFLUENCE OF PELVIC MUSCLE ACTIVATION DURING VAGINAL DELIVERY IN OCCIPITO-POSTERIOR PRESENTATION". 2010.
  7. Parente, M; Mascarenhas, T; Jorge, RN; Fernandes, A. "EVALUATION OF THE INFLUENCE OF PELVIC MUSCLE ACTIVATION DURING VAGINAL DELIVERY IN OCCIPITO-POSTERIOR PRESENTATION". 2010.
  8. Parente, MP; Jorge, RMN; Fernandes, AA; Mascarenhas, T. "THE INFLUENCE OF THE DEGREE OF FLEXION OF THE FETAL HEAD ON THE BIOMECHANICAL BEHAVIOR OF THE PELVIC FLOOR MUSCLES DURING VAGINAL DELIVERY". 2009.
  9. Parente, M; Jorge, R; Mascarenhas, T; Duarte, S; Costa, F; Martins, J. "Stress analysis on pelvic floor induced by the passage of a fetus". 2008.
  10. Parente, M; Jorge, R; Mascarenhas, T; Fernandes, A; Martins, J; Mota, R; Patricio, B. "Numerical study on the deformation of the pelvic floor muscles during a vaginal delivery". 2008.

Outros

Outra produção
  1. Generalizability challenges of a machine learning model for classification of indeterminate biliary strictures Response. 2022. Ferreira, JPS; Saraiva, MM; Ribeiro, T; Silva, FVB; Pereira, P; Jorge, RN; Macedo, G.
  2. Injuries in Muscle-Tendon-Bone Units: A Systematic Review Considering the Role of Passive Tissue Fatigue. 2021. Pouca, MCPV; Parente, MPL; Jorge, RMN; Ashton Miller, JA.
    10.1177/23259671211020731
  3. Foreword. 2018. Jorge, RN.
  4. Preface. 2011. Tavares, JMRS; Jorge, RMN.
  5. Preface. 2009. Tavares, JMRS; Jorge, RMN.
Atividades

Orientação

Título / Tema
Papel desempenhado
Curso (Tipo)
Instituição / Organização
2017 - 2022/02/02 Computational methods to simulate angiogenesis
Orientador
Engenharia Biomédica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2016/10/01 - 2020/03/30 A cell-based approach to early detect female pelvic organ prolapse
Coorientador
Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2013/10/01 - 2018/07/27 Development of a methodology to design a lower limb assistive exoskeleton
Coorientador
Engenharia Biomédica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2014/09/12 - 2018/07/16 Physical activity, exercise and the pelvic floor
Orientador
Universidade do Porto Faculdade de Desporto, Portugal
2018 - 2018 Modulação computacional da curvatura lombar e a sua relação com a morfologia do pavimento pélvico
Coorientador
Engenharia Biomédica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2018 - 2018 Efeito da Aplicação do Espaçador Interespinhoso na Biomecânica da Coluna Vertebral
Coorientador
Engenharia Biomédica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2018 - 2018 Biocomputational Model for Urodynamic Analysis
Coorientador
Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2018 - 2018 Influência do Tratamento Laser na Biomecânica da Cavidade Pélvica Feminina
Orientador
Engenharia Biomédica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2018 - 2018 Análise do Comportamento Dinâmico de Estruturas Constituídas por Espumas Metálicas
Orientador
Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2018 - 2018 Biomechanical simulation of soft tissues - structure, angiogenesis and regeneration
Orientador
Engenharia Biomédica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2013/09/20 - 2017/10/27 Analysis of bone damage during drilling processes
Orientador
Universidade do Porto Faculdade de Engenharia, Portugal
2014/10/18 - 2017/10/13 Application of Magnetic Resonance Imaging in the Biomechanical Analysis of the Female Pelvic Floor Muscles
Orientador
Universidade do Porto Faculdade de Engenharia, Portugal
2013/10/01 - 2017/09/15 On the Way to Achieve Competence in Sacral Nerve Stimulation: a Multi-approach Anatomical Study in Humans
Coorientador
Biomedicina (Doutoramento)
Universidade do Porto Faculdade de Medicina, Portugal
2012/09/17 - 2017/05/26 Computational model of the middle and inner ear
Orientador
Universidade do Porto Faculdade de Engenharia, Portugal
2011/10/01 - 2017/05/26 Computational model of the middle and inner ear
Orientador
Segurança e Saúde Ocupacionais (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2017 - 2017 Modulação Biomecânica da Pressão na Cavidade Abdomino-Pélvica
Orientador
Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2017 - 2017 Aplicação de técnicas de realidade virtual na simulação do parto
Orientador
Engenharia Electrotécnica e de Computadores (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2016 - 2016 Simulação biomecânica da gaguez
Orientador
Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2016 - 2016 On the Forces of the Pubovisceral Muscle: A Biomechanical Analysis
Orientador
Bioengenharia (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2012/10/01 - 2016 Modeling damage process in pelvic tissues during vaginal delivery
Coorientador
Engenharia Biomédica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2012/09/17 - 2015/03/09 Efeitos Adversos de interfaces na Ventilação e Suporte Ventilatórios Noturno não invasivos: Um estudo clínico, numérico e experimental
Orientador
Universidade do Porto Faculdade de Engenharia, Portugal
2011/10/01 - 2015/02/12 Urinary incontinence in young nulliparous women: the effects of different levels of physical activity
Coorientador
Atividade Física e Saúde (Doutoramento)
Universidade do Porto Faculdade de Desporto, Portugal
2015 - 2015 Biomecânica do complexo do ombro - consequências de uma placagem de ombro
Orientador
Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2015 - 2015 Dimensionamento e análise estrutural de uma cortina de água e de um tecto interior flutuante.
Coorientador
Engenharia Mecânica (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2011/09/18 - 2014/07/18 Estudo de estruturas sandwich hidroformadas constiuídas por núcleo de espumas metálicas
Orientador
Universidade do Porto Faculdade de Engenharia, Portugal
2014 - 2014 Biomechanical study of pelvic organ prolapse and correction under aplication of urogynecologic surgical meshes
Coorientador
Bioengenharia (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2013 - 2013 Desenvolvimento de uma sonda intravaginal para avaliação do comportamento biomecânico do pavimento pélvico da mulher
Coorientador
Engenharia Biomédica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2008/10/01 - 2012/12/20 Segmentation, Tracking and 3D Reconstruction of Structures Represented in Images: Applications in Medical Images
Coorientador
Engenharia Biomédica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2008/10/01 - 2012/12/17 Analysis of laminated and functionally graded plates and shells by a unified formulation and collocation with radial basis functions
Coorientador
Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2008/10/01 - 2012/05/17 Design the travel experience. Identification and incorporation of passengers’ experience rquirements in new bus body development
Coorientador
Líderes para Indústrias Tecnológicas (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2006/10/01 - 2010/12/17 The Natural Neighbour Radial Point Interpolation Method. Solid Mechanics and Mechanobiology Applications
Orientador
Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2006/10/01 - 2010/09/20 Aplicação de iniciativas lean no desenvolvimento de produto da indústria de móveis
Coorientador
Engenharia e Gestão Industrial (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2005/09/01 - 2010/09/02 Experimental and numerical studies of soft biological tissues
Orientador
Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2004/09/01 - 2008/09/08 Biomechanics of the Pelvic Floor during Vaginal Delivery
Orientador
Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2003/10/01 - 2007/05/29 Métodos Sem Malha para a Análise de Placa e Cascas Compósitas
Coorientador
Ciências de Engenharia (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2000/10/02 - 2005/02/28 Maquinagem por Abrasão de Materiais de Construção Mecânica
Coorientador
Engenharia Mecânica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2000/09/01 - 2004/12/09 Desenvolvimentos na Tecnologia de Elementos Finitos do Tipo Casca e Sólido-Casca na Mecânica dos Meios Contínuos Não-Linear
Coorientador
Mecanica (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação)
Instituição / Organização
2019/10/16 - 2019/10/18 VIPIMAGE – VII ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing (2019/10/16 - 2019/10/18)
Conferência (Coorganizador)
2017/06/18 - 2017/06/20 VIPIMAGE – Sixth ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing (2017/06/18 - 2017/06/20)
Conferência (Coorganizador)
Universidade do Porto Faculdade de Engenharia, Portugal
2016/10/21 - 2016/10/23 IV International Conference on Biodental Engineering (2016/10/21 - 2016/10/23)
Conferência (Coorganizador)
Universidade do Porto Faculdade de Engenharia, Portugal

Universidade do Porto Faculdade de Medicina Dentária, Portugal
2016/06/01 - 2016/06/03 CEM2016 – Mechanical Engineering Conference (2016/06/01 - 2016/06/03)
Conferência (Coorganizador)
Associated Laboratory for Energy Transports and Aeronautics, Portugal
2015/10/19 - 2015/10/21 VIPIMAGE – Fifth ECCOMAS Thematic Conference on Computational Vision and Medical Image Processing (2015/10/19 - 2015/10/21)
Conferência (Coorganizador)
Universidade do Porto Faculdade de Engenharia, Portugal
2015/06/20 - 2015/06/23 BioMedWomen - International Conference on Clinical and Bioengineering for Women’s Health (2015/06/20 - 2015/06/23)
Conferência (Coorganizador)
Universidade do Porto, Portugal
2015/02/26 - 2015/02/28 4th Portuguese Meeting on Bioengineering (2015/02/26 - 2015/02/28)
Conferência (Coorganizador)
Universidade do Porto Faculdade de Engenharia, Portugal

Universidade do Porto Faculdade de Medicina, Portugal
2014/06/22 - 2014/06/23 III International Conference on Biodental Engineering (2014/06/22 - 2014/06/23)
Conferência (Coorganizador)
Universidade do Porto Faculdade de Engenharia, Portugal

Universidade do Porto Faculdade de Medicina Dentária, Portugal
Distinções

Prémio

2019 Prémio Melhor Apresentação Oral por Estudante, 8º Congresso Nacional de Biomecânica, Unhais da Serra-Covilhã, Portugal, 15-16 fevereiro, 2019.
Sociedade Portuguesa de Biomecânica, Portugal
2019 Prémio Melhor Poster, 8º Congresso Nacional de Biomecânica, Unhais da Serra-Covilhã, Portugal, 15-16 fevereiro, 2019.
Sociedade Portuguesa de Biomecânica, Portugal
2018 Prémio de reconhecimento científico FEUP 2017
Universidade do Porto Faculdade de Engenharia, Portugal
2017 Prémio Melhor Poster, 189ª Reunião da Sociedade Portuguesa de Ginecologia, Ílhavo, 10-11 novembro 2017.
Sociedade portuguesa de ginecologia, Portugal
2017 Best paper in Category Prize – Anatomy / Biomechanics at ICS Annual Congress 2017, 47th Annual Meeting of the International Continence Society, ICS2017, Abstract #48, Florence, Italy, 12-15 September, 2017.
International continence society, Estados Unidos
2017 Prémio de reconhecimento científico FEUP 2016
Universidade do Porto Faculdade de Engenharia, Portugal
2016 2º Prémio, XIV Congresso da Sociedade Ibero-Americana de NeuroUrologia e Uroginecologia, Porto, 30 June-2 July 2016.
Sociedade Ibero-Americana de NeuroUrologia e Uroginecologia, Espanha
2016 Prémio de reconhecimento científico FEUP 2015
Universidade do Porto Faculdade de Engenharia, Portugal
2015 Winner at the EUGA Annual Congress 2015 abstract competition with oral presentation, 8th EUGA Annual Congress - The European Urogynaecological Association Annual Meeting, Warsaw, Poland, 5 – 7 November 2015.
European Urogynaecological Association, Reino Unido
2014 Prémio Engª Cruz Azevedo atribuído pela APAET-Associação Portuguesa de Análise Experimental de Tensões relativo ao melhor artigo publicado na Revista Mecânica Experimental em 2013
Associação Portuguesa de Análise Experimental de Tensões, Portugal

Outra distinção

2016 Highly cited paper in European Journal of Mechanics – A/Solids, 2016, paper 37:24-34, 2013
Elsevier GmbH, Alemanha