???global.info.a_carregar???
Maria Beatriz Silva holds a PhD in Mechanical Engineering from Instituto Superior Técnico (IST), University of Lisbon (2008). She is currently an associate professor with Habilitation (2023) at the Manufacturing and Industrial Management unit of the Mechanical Engineering Department of IST. She is an integrated member of the Associated Laboratory for Energy, Transports and Aeronautics (LAETA). Her scientific activity covers the areas of manufacturing, formability limits of materials and the experimental and numerical analysis of forming processes.
Identificação

Identificação pessoal

Nome completo
Maria Beatriz Silva

Nomes de citação

  • Silva, Maria Beatriz
  • M. B. Silva
  • M. Beatriz Silva

Identificadores de autor

Ciência ID
E512-4B36-2E7C
ORCID iD
0000-0002-5284-8391
Google Scholar ID
https://scholar.google.com/citations?user=cAXPGXkAAAAJ&hl=en
Researcher Id
E-3413-2012
Scopus Author Id
7403410598

Telefones

Telefone
  • (351) 218417560 Ext.: 1560 (Profissional)

Moradas

  • Instituto Superior Técnico, Av. Rovisco Pais, 1049-001, Lisboa, Lisboa, Portugal (Profissional)

Websites

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Português (Idioma materno)
Inglês
Espanhol; Castelhano
Francês
Formação
Grau Classificação
2023/10/31
Concluído
 Mechanical Engineering (Título de Agregado)
Instituto Superior Técnico Departamento de Engenharia Mecânica, Portugal
 Approved
2008/12/15
Concluído
 Engenharia Mecânica (Doutoramento)
Especialização em Sem especialidade
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Single Point Incremental Forming" (TESE/DISSERTAÇÃO)
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento 		Empregador
2018/01/11 - Atual Professor Associado (Docente Universitário) Universidade de Lisboa Instituto Superior Técnico, Portugal
Universidade de Lisboa Instituto Superior Técnico, Portugal
2008/12/16 - 2018/01/10 Professor Auxiliar (Docente Universitário) Universidade de Lisboa Instituto Superior Técnico, Portugal
Universidade de Lisboa Instituto Superior Técnico, Portugal
2004/03/25 - 2008/12/15 Assistente (Docente Universitário) Universidade de Lisboa Instituto Superior Técnico, Portugal
Universidade de Lisboa Instituto Superior Técnico, Portugal

Cargos e Funções

Categoria Profissional
Instituição de acolhimento 		Empregador
2021/01/01 - 2024/12/31 Coordinator of the Unit of Manufacturing and Industrial Management Universidade de Lisboa Instituto Superior Técnico, Portugal
Instituto Superior Técnico Departamento de Engenharia Mecânica, Portugal
2017/01/01 - 2024/12/31 Member of the Pedagogical Council Universidade de Lisboa Instituto Superior Técnico, Portugal
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/01/01 - 2020/12/31 Member of the Executive Committee of the Pedagogical Council Universidade de Lisboa Instituto Superior Técnico, Portugal
Universidade de Lisboa Instituto Superior Técnico, Portugal
Projetos

Projeto

Designação Financiadores
2022/01/01 - 2024/12/31 Implantes biodegradáveis em ferro poroso obtidos por fabrico aditivo
PTDC/CTM-CTM/3354/2021
Instituto de Engenharia Mecânica, Portugal

Instituto Politécnico de Setúbal, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Universidade do Porto Faculdade de Medicina, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2020/01/01 - 2023/12/31 Associate Laboratory of Energy, Transports and Aeronautics
UIDB/50022/2020
10.54499/UIDB/50022/2020
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal

Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2016/10/01 - 2019/09/30 Modular Light-Rail Seat
LISBOA-01-0247-FEDER-017247
Investigador responsável
Universidade de Lisboa Instituto Superior Técnico, Portugal
Concluído
2016/03/01 - 2019/08/31 Sheet Bulk Forming
PTDC/EMS-TEC/0626/2014
Investigador Pós-doutorado
Instituto de Engenharia Mecânica, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2011/01/01 - 2012/12/31 Strategic Project - LA 22 - 2011-2012
PEst-OE/EME/LA0022/2011
Instituto de Engenharia Mecânica, Portugal

Universidade da Beira Interior, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2009/12/01 - 2012/07/31 Single Point Incremental Forming of Polymers
PTDC/EME-TME/098728/2008
Investigador Pós-doutorado
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2007/05/03 - 2010/07/31 Single Point Incremental Forming of Metals
PTDC/EME-TME/64706/2006
Investigador Pós-doutorado
Universidade de Lisboa Instituto Superior Técnico, Portugal

Instituto de Engenharia Mecânica, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
Produções

Publicações

Artigo em conferência
  1. Silva, M.B.; Castro, L.S.; Gonçalves, I.; Moura, L.; David, F.; Baptista, T.. "Peer observation project at the university of lisbon – Implementation and management". 2021.
    10.1109/CISPEE47794.2021.9507220
  2. Silva, M.B.; Rodrigues, A.; Oliveira e Silva, L.; Barros, R.A.. "Pedagogical innovation projects at TÉcNICo". 2021.
    10.1109/CISPEE47794.2021.9507206
  3. David, F.; Pena, M.T.; de Barros, M.R.A.; Silva, M.B.; Graça, M.; Rodrigues, A.. "Teaching and learning during one year of the pandemic at Técnico Lisboa". 2021.
    10.1109/CISPEE47794.2021.9507247
  4. Magrinho, J.P.; Centeno, G.; Silva, M.B.; Morales-Palma, D.; Vallellano, C.; Martins, P.A.F.. "Process window of tube-end inversion: Experimentation and numerical analysis". 2019.
  5. Centeno, G.; Silva, M.B.; Alves, L.M.; Vallellano, C.; Martins, P.A.F.. "On the Utilization of Circle Grid Analysis in Thin-walled Forming of Tubes: Experimental and Numerical Evaluation". 2017.
    10.1016/j.proeng.2017.10.937
  6. Silva, M.B.; Martínez-Donaire, A.J.; Centeno, G.; Morales-Palma, D.; Vallellano, C.; Martins, P.A.F.. "Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming". 2015.
    10.1016/j.proeng.2015.12.504
  7. Alves, M.L.; Silva, M.B.; Alves, L.M.; Martins, P.A.F.. "On the formability, geometrical accuracy and surface quality of sheet metal parts produced by SPIF". 2009.
    10.1117/12.839028
  8. Skjoedt, M.; Silva, M.B.; Martins, P.A.F.; Bay, N.. "Strain paths and fracture in multi stage single point incremental forming". 2008.
Artigo em revista
  1. I.M. Almeida; J.P. Magrinho; M.B. Silva; P.A.F. Martins. "Formability limits due to local buckling in thin-walled square tubes". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2025): https://doi.org/10.1177/14644207241266898.
    10.1177/14644207241266898
  2. Pedro Nogueira; João PG Magrinho; Maria B Silva; Augusto M de Deus; Maria F Vaz. "Compression properties of cellular iron lattice structures used to mimic bone characteristics". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2024): https://doi.org/10.1177/14644207241241799.
    10.1177/14644207241241799
  3. Pedro Nogueira; João Magrinho; Luis Reis; Augusto Moita de Deus; Maria Beatriz Silva; Pedro Lopes; Luís Oliveira; et al. "Mechanical and Corrosion Behaviour in Simulated Body Fluid of As-Fabricated 3D Porous L-PBF 316L Stainless Steel Structures for Biomedical Implants". Journal of Functional Biomaterials (2024): https://doi.org/10.3390/jfb15100313.
    10.3390/jfb15100313
  4. Pedro Nogueira; Maria Beatriz Silva; Augusto Moita de Deus; Ricardo Cláudio; Maria Carmezim; Catarina Santos; João Magrinho; et al. "Evaluation of the roughness of lattice structures of AISI 316 stainless steel produced by laser powder bed fusion". Engineering Manufacturing Letters (2024): https://doi.org/10.24840/2795-5168_002-001_2682.
    10.24840/2795-5168_002-001_2682
  5. Pedro Lopes; Fahad Zafar; Catarina Costa; João Castro; João R Matos; Pedro Nogueira; João P G Magrinho; et al. "A comprehensive study of LPBF parameter influence in 316L stainless steel mechanical properties, macrostructure, and printability". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2024): https://doi.org/10.1177/14644207241286674.
    10.1177/14644207241286674
  6. Pedro Nogueira; Pedro Lopes; Luís Oliveira; Jorge L. Alves; João P. G. Magrinho; Augusto Moita de Deus; M. Fátima Vaz; M. Beatriz Silva. "Evaluation of Lattice Structures for Medical Implants: A Study on the Mechanical Properties of Various Unit Cell Types". Metals (2024): https://doi.org/10.3390/met14070780.
    10.3390/met14070780
  7. MC Salama; F Alves; L Reis; AM Deus; MB Silva; C Santos; MJ Carmezim; MF Vaz. "Mechanical and corrosion performance of biodegradable iron porous structures". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2024): https://doi.org/10.1177/14644207231188709.
    10.1177/14644207231188709
  8. Ana Rosa-Sainz; M. Beatriz Silva; Ana M. Beltrán; Gabriel Centeno; Carpóforo Vallellano. "Assessing Formability and Failure of UHMWPE Sheets through SPIF: A Case Study in Medical Applications". Polymers (2023): https://doi.org/10.3390/polym15173560.
    10.3390/polym15173560
  9. Mariana C Salama; Frederico PD Alves; Luis Reis; Augusto M Deus; M Beatriz Silva; Catarina Santos; M Joao Carmezim; M Fátima Vaz. "Finite element simulations of mechanical behaviour and degradation of iron lattices". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2023): https://doi.org/10.1177/14644207221142024.
    10.1177/14644207221142024
  10. João A.O. Santos; João P.G. Magrinho; Maria Beatriz Silva. "Physically-Based Methodology for the Characterization of Wrinkling Limit Curve Validated by Yoshida Tests". Metals (2023): https://doi.org/10.3390/met13040746.
    10.3390/met13040746
  11. João P Magrinho; M Beatriz Silva; Gabriel Centeno; Paulo AF Martins. "Formability limits by local buckling in thin-walled tubes". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (2022): https://doi.org/10.1177/09544054221138181.
    10.1177/09544054221138181
  12. Jorge Gil; Abílio de Jesus; Maria Beatriz Silva; Maria F. Vaz; Ana Reis; João Manuel R. S. Tavares. "Automation of Property Acquisition of Single Track Depositions Manufactured through Direct Energy Deposition". Applied Sciences 12 5 (2022): 2755-2755. https://doi.org/10.3390/app12052755.
    10.3390/app12052755
  13. Gabriel Centeno Báez; M. Beatriz Silva. "Tube and Sheet Metal Forming Processes and Applications". Metals (2022): https://www.mdpi.com/2075-4701/12/4/553.
    10.3390/met12040553
  14. Carlos Suntaxi; Gabriel Centeno; M. Silva; Carpóforo Vallellano; Paulo Martins. "Tube Expansion by Single Point Incremental Forming: An Experimental and Numerical Investigation". Metals 11 9 (2021): 1481-1481. https://doi.org/10.3390/met11091481.
    10.3390/met11091481
  15. Kasaei, M.M.; Moslemi Naeini, H.; Abbaszadeh, B.; Roohi, A.H.; Silva, M.B.; Martins, P.A.F.. "On the prediction of wrinkling in flexible roll forming". International Journal of Advanced Manufacturing Technology 113 7-8 (2021): 2257-2275. http://www.scopus.com/inward/record.url?eid=2-s2.0-85101208702&partnerID=MN8TOARS.
    10.1007/s00170-021-06790-4
  16. Rosa-Sainz, A.; Centeno, G.; Silva, M.B.; Vallellano, C.. "Experimental failure analysis in polycarbonate sheet deformed by spif". Journal of Manufacturing Processes 64 (2021): 1153-1168. http://www.scopus.com/inward/record.url?eid=2-s2.0-85101969065&partnerID=MN8TOARS.
    10.1016/j.jmapro.2021.01.047
  17. Ana Rosa-Sainz; Gabriel Centeno; Maria Beatriz Silva; Jose Andrés López-Fernández; Andrés Jesus Martínez-Donaire; Carpoforo Vallellano. "On the Determination of Forming Limits in Polycarbonate Sheets". Materials 13 4 (2020): 928-928. https://doi.org/10.3390/ma13040928.
    10.3390/ma13040928
  18. V.A. Cristino; J.P. Magrinho; G. Centeno; M.B. Silva; P.A.F. Martins. "Theory of single point incremental forming of tubes". Journal of Materials Processing Technology (2020): 116659-116659. https://doi.org/10.1016/j.jmatprotec.2020.116659.
    10.1016/j.jmatprotec.2020.116659
  19. Leonardo, P.N.C.; Magrinho, J.P.; Bragança, I.M.F.; Silva, M.B.; Silva, C.M.A.; Martins, P.A.F.. "Formability limits in sheet-bulk forming". International Journal of Machine Tools and Manufacture 149 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85075000590&partnerID=MN8TOARS.
    10.1016/j.ijmachtools.2019.103509
  20. João P. Magrinho; M. Beatriz Silva; Luis Reis; Paulo Martins. "Formability Limits, Fractography and Fracture Toughness in Sheet Metal Forming". Materials (2019): https://www.mdpi.com/1996-1944/12/9/1493.
    10.3390/ma12091493
  21. Silva, Maria. "On the determination of forming limits in thin-walled tubes". International Journal of Mechanical Sciences (2019): http://dx.doi.org/10.1016/j.ijmecsci.2019.03.020.
    10.1016/j.ijmecsci.2019.03.020
  22. Silva, Maria. "A flexible sheet-bulk forming demonstrator". International Journal of Advanced Manufacturing Technology (2019): http://dx.doi.org/10.1007/s00170-019-03637-x.
    10.1007/s00170-019-03637-x
  23. Silva, Maria. "A digital image correlation based methodology to characterize formability in tube forming". Journal of Strain Analysis for Engineering Design (2019): http://dx.doi.org/10.1177/0309324718823629.
    10.1177/0309324718823629
  24. Magrinho, J.P.; Centeno, G.; Silva, M.B.; Vallellano, C.; Martins, P.A.F.. "On the formability limits of thin-walled tube inversion using different die fillet radii". Thin-Walled Structures 144 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85073646757&partnerID=MN8TOARS.
    10.1016/j.tws.2019.106328
  25. Magrinho, J.P.; Silva, M.B.; Martins, P.A.F.. "Injection by sheet-bulk forming". Precision Engineering 59 (2019): 73-80. http://www.scopus.com/inward/record.url?eid=2-s2.0-85067274926&partnerID=MN8TOARS.
    10.1016/j.precisioneng.2019.06.003
  26. Silva, Maria. "Microstructural investigation and lubrication study for single point incremental forming of copper". International Journal of Solids and Structures (2018): http://dx.doi.org/10.1016/j.ijsolstr.2017.09.018.
    10.1016/j.ijsolstr.2017.09.018
  27. Silva, Maria. "Sheet-bulk forming of three-dimensional features in metal and polymer blanks". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2018): http://dx.doi.org/10.1177/1464420718796692.
    10.1177/1464420718796692
  28. Silva, Maria. "Formability limits by wrinkling in sheet metal forming". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2018): http://dx.doi.org/10.1177/1464420716642794.
    10.1177/1464420716642794
  29. Silva, Maria. "Characterizing fracture forming limit and shear fracture forming limit for sheet metals". Journal of Materials Processing Technology (2018): http://dx.doi.org/10.1016/j.jmatprotec.2018.01.035.
    10.1016/j.jmatprotec.2018.01.035
  30. Silva, Maria. "New methodology for the characterization of failure by fracture in bulk forming". Journal of Strain Analysis for Engineering Design (2018): http://dx.doi.org/10.1177/0309324718758842.
    10.1177/0309324718758842
  31. Cristino, V.A.M.; Silva, M.B.; Wong, P.K.; Martins, P.A.F.. "Determining the fracture forming limits in sheet metal forming: A technical note". Journal of Strain Analysis for Engineering Design 52 8 (2017): 467-471. http://www.scopus.com/inward/record.url?eid=2-s2.0-85031696982&partnerID=MN8TOARS.
    10.1177/0309324717727443
  32. Silva, C.M.A.; Silva, M.B.; Alves, L.M.; Martins, P.A.F.. "A new test for determining the mechanical and fracture behavior of materials in sheet-bulk metal forming". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 231 8 (2017): 693-703. http://www.scopus.com/inward/record.url?eid=2-s2.0-85034426466&partnerID=MN8TOARS.
    10.1177/1464420715616140
  33. Isik, K.; Wernicke, S.; Silva, M.B.; Martins, P.A.F.; Tekkaya, A.E.. "Failure by fracture in sheet-bulk metal forming". Journal of Strain Analysis for Engineering Design 51 5 (2016): 387-394. http://www.scopus.com/inward/record.url?eid=2-s2.0-84974795080&partnerID=MN8TOARS.
    10.1177/0309324716639773
  34. Silva, M.B.; Isik, K.; Tekkaya, A.E.; Atkins, A.G.; Martins, P.A.F.. "Fracture toughness and failure limits in sheet metal forming". Journal of Materials Processing Technology 234 (2016): 249-258. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962374933&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2016.03.029
  35. Centeno, G.; Silva, M.B.; Alves, L.M.; Vallellano, C.; Martins, P.A.F.. "Towards the characterization of fracture in thin-walled tube forming". International Journal of Mechanical Sciences 119 (2016): 12-22. http://www.scopus.com/inward/record.url?eid=2-s2.0-85007557364&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2016.10.001
  36. Jawale, K.; Duarte, J.F.; Reis, A.; Silva, M.B.. "Lubrication study for single point incremental forming of copper". Journal of Physics: Conference Series 734 3 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84989219395&partnerID=MN8TOARS.
    10.1088/1742-6596/734/3/032038
  37. Madeira, T.; Silva, C.M.A.; Silva, M.B.; Martins, P.A.F.. "Failure in single point incremental forming". International Journal of Advanced Manufacturing Technology 80 9-12 (2015): 1471-1479. http://www.scopus.com/inward/record.url?eid=2-s2.0-84942367191&partnerID=MN8TOARS.
    10.1007/s00170-014-6381-7
  38. Kerim, I.; Silva, M.B.; Atkins, A.G.; Tekkaya, A.E.; Martins, P.A.F.. "A new test for determining fracture toughness in plane stress in mode II". Journal of Strain Analysis for Engineering Design 50 4 (2015): 221-231. http://www.scopus.com/inward/record.url?eid=2-s2.0-84928164617&partnerID=MN8TOARS.
    10.1177/0309324715576429
  39. Kasaei, M.M.; Naeini, H.M.; Liaghat, G.H.; Silva, C.M.A.; Silva, M.B.; Martins, P.A.F.. "Revisiting the wrinkling limits in flexible roll forming". Journal of Strain Analysis for Engineering Design 50 7 (2015): 528-541. http://www.scopus.com/inward/record.url?eid=2-s2.0-84945199721&partnerID=MN8TOARS.
    10.1177/0309324715590956
  40. Cristino, V.A.M.; Silva, M.B.; Wong, P.K.; Tam, L.M.; Martins, P.A.F.. "Hole-flanging of metals and polymers produced by single point incremental forming". International Journal of Materials and Product Technology 50 1 (2015): 37-48. http://www.scopus.com/inward/record.url?eid=2-s2.0-84921267594&partnerID=MN8TOARS.
    10.1504/IJMPT.2015.066865
  41. Soeiro, J.M.C.; Silva, C.M.A.; Silva, M.B.; Martins, P.A.F.. "Revisiting the formability limits by fracture in sheet metal forming". Journal of Materials Processing Technology 217 (2015): 184-192. http://www.scopus.com/inward/record.url?eid=2-s2.0-84911466841&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2014.11.009
  42. Cristino, V.A.M.; Montanari, L.; Silva, M.B.; Martins, P.A.F.. "Towards square hole-flanging produced by single point incremental forming". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 229 5 (2015): 380-388. http://www.scopus.com/inward/record.url?eid=2-s2.0-84940933764&partnerID=MN8TOARS.
    10.1177/1464420714524930
  43. Araújo, R.; Teixeira, P.; Montanari, L.; Reis, A.; Silva, M.B.; Martins, P.A.F.. "Single point incremental forming of a facial implant". Prosthetics and Orthotics International 38 5 (2014): 369-378. http://www.scopus.com/inward/record.url?eid=2-s2.0-84927771774&partnerID=MN8TOARS.
    10.1177/0309364613502071
  44. Alkas Yonan, S.; Silva, M.B.; Martins, P.A.F.; Tekkaya, A.E.. "Plastic flow and failure in single point incremental forming of PVC sheets". Express Polymer Letters 8 5 (2014): 301-311. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896826660&partnerID=MN8TOARS.
    10.3144/expresspolymlett.2014.34
  45. Cristino, V.A.; Montanari, L.; Silva, M.B.; Atkins, A.G.; Martins, P.A.F.. "Fracture in hole-flanging produced by single point incremental forming". International Journal of Mechanical Sciences 83 (2014): 146-154. http://www.scopus.com/inward/record.url?eid=2-s2.0-84898989269&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2014.04.001
  46. Isik, K.; Silva, M.B.; Tekkaya, A.E.; Martins, P.A.F.. "Formability limits by fracture in sheet metal forming". Journal of Materials Processing Technology 214 8 (2014): 1557-1565. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896978377&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2014.02.026
  47. Montanari, L.; Cristino, V.A.; Silva, M.B.; Martins, P.A.F.. "On the relative performance of hole-flanging by incremental sheet forming and conventional press-working". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 228 4 (2014): 312-322. http://www.scopus.com/inward/record.url?eid=2-s2.0-84937790459&partnerID=MN8TOARS.
    10.1177/1464420713492149
  48. Silva, M.B.; Teixeira, P.; Reis, A.; Martins, P.A.F.. "On the formability of hole-flanging by incremental sheet forming". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 227 2 (2013): 91-99. http://www.scopus.com/inward/record.url?eid=2-s2.0-84877908702&partnerID=MN8TOARS.
    10.1177/1464420712474210
  49. Montanari, L.; Cristino, V.A.; Silva, M.B.; Martins, P.A.F.. "A new approach for deformation history of material elements in hole-flanging produced by single point incremental forming". International Journal of Advanced Manufacturing Technology 69 5-8 (2013): 1175-1183. http://www.scopus.com/inward/record.url?eid=2-s2.0-84887625539&partnerID=MN8TOARS.
    10.1007/s00170-013-5117-4
  50. Silva, M.B.; Martinho, T.M.; Martins, P.A.F.. "Incremental forming of hole-flanges in polymer sheets". Materials and Manufacturing Processes 28 3 (2013): 330-335. http://www.scopus.com/inward/record.url?eid=2-s2.0-84875952374&partnerID=MN8TOARS.
    10.1080/10426914.2012.682488
  51. Silva, M.B.; Martins, P.A.F.. "Two-point incremental forming with partial die: Theory and experimentation". Journal of Materials Engineering and Performance 22 4 (2013): 1018-1027. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876492832&partnerID=MN8TOARS.
    10.1007/s11665-012-0400-3
  52. Marques, T.A.; Silva, M.B.; Martins, P.A.F.. "On the potential of single point incremental forming of sheet polymer parts". International Journal of Advanced Manufacturing Technology 60 1-4 (2012): 75-86. http://www.scopus.com/inward/record.url?eid=2-s2.0-84859545057&partnerID=MN8TOARS.
    10.1007/s00170-011-3585-y
  53. Centeno, G.; Silva, M.B.; Cristino, V.A.M.; Vallellano, C.; Martins, P.A.F.. "Hole-flanging by incremental sheet forming". International Journal of Machine Tools and Manufacture 59 (2012): 46-54. http://www.scopus.com/inward/record.url?eid=2-s2.0-84859909902&partnerID=MN8TOARS.
    10.1016/j.ijmachtools.2012.03.007
  54. Alves, L.M.; Silva, M.B.; Martins, P.A.F.. "Fabrication of small size seamless reservoirs by tube forming". International Journal of Pressure Vessels and Piping 88 5-7 (2011): 239-247. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960139945&partnerID=MN8TOARS.
    10.1016/j.ijpvp.2011.04.003
  55. Silva, M.B.; Nielsen, P.S.; Bay, N.; Martins, P.A.F.. "Failure mechanisms in single-point incremental forming of metals". International Journal of Advanced Manufacturing Technology 56 9-12 (2011): 893-903. http://www.scopus.com/inward/record.url?eid=2-s2.0-80053564442&partnerID=MN8TOARS.
    10.1007/s00170-011-3254-1
  56. Silva, M.B.; Alves, L.M.; Martins, P.A.F.. "Single point incremental forming of PVC: Experimental findings and theoretical interpretation". European Journal of Mechanics, A/Solids 29 4 (2010): 557-566. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955326801&partnerID=MN8TOARS.
    10.1016/j.euromechsol.2010.03.008
  57. Skjoedt, M.; Silva, M.B.; Martins, P.A.F.; Bay, N.. "Strategies and limits in multi-stage single-point incremental forming". Journal of Strain Analysis for Engineering Design 45 1 (2010): 33-44. http://www.scopus.com/inward/record.url?eid=2-s2.0-74549175990&partnerID=MN8TOARS.
    10.1243/03093247JSA574
  58. Silva, M.B.; Skjoedt, M.; Vilaça, P.; Bay, N.; Martins, P.A.F.. "Single point incremental forming of tailored blanks produced by friction stir welding". Journal of Materials Processing Technology 209 2 (2009): 811-820. http://www.scopus.com/inward/record.url?eid=2-s2.0-58149147618&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2008.02.057
  59. Silva, M.B.; Skjoedt, M.; Bay, N.; Martins, P.A.F.. "Revisiting single-point incremental forming and formability/failure diagrams by means of finite elements and experimentation". Journal of Strain Analysis for Engineering Design 44 4 (2009): 221-234. http://www.scopus.com/inward/record.url?eid=2-s2.0-69249150778&partnerID=MN8TOARS.
    10.1243/03093247JSA522
  60. Silva, M.B.; Skjoedt, M.; Martins, P.A.F.; Bay, N.. "Revisiting the fundamentals of single point incremental forming by means of membrane analysis". International Journal of Machine Tools and Manufacture 48 1 (2008): 73-83. http://www.scopus.com/inward/record.url?eid=2-s2.0-35348860271&partnerID=MN8TOARS.
    10.1016/j.ijmachtools.2007.07.004
  61. Silva, M.B.; Skjoedr, M.; Atkins, A.G.; Bay, N.; Martins, P.A.F.. "Single-point incremental forming and formability-failure diagrams". Journal of Strain Analysis for Engineering Design 43 1 (2008): 15-35. http://www.scopus.com/inward/record.url?eid=2-s2.0-39049142132&partnerID=MN8TOARS.
    10.1243/03093247JSA340
  62. Martins, P.A.F.; Bay, N.; Skjoedt, M.; Silva, M.B.. "Theory of single point incremental forming". CIRP Annals - Manufacturing Technology 57 1 (2008): 247-252. http://www.scopus.com/inward/record.url?eid=2-s2.0-43649106993&partnerID=MN8TOARS.
    10.1016/j.cirp.2008.03.047
  63. Silva, M.B.; Baptista, R.M.S.O.; Martins, P.A.F.. "Stamping of automotive components: A numerical and experimental investigation". Journal of Materials Processing Technology 155-156 1-3 (2004): 1489-1496. http://www.scopus.com/inward/record.url?eid=2-s2.0-10044272868&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2004.04.208
Capítulo de livro
  1. João P. M. Pragana; M. Beatriz Silva; Bárbara P. P. A. Gouveia. "Bulk Metal Forming Processes: Analytical and Numerical Analysis". 2024.
    10.1007/978-3-031-48468-1_4
  2. Pedro Nogueira; João P. G. Magrinho; M. Beatriz Silva; Augusto Moita de Deus; M. Fátima Vaz. "Graded Lattice Structures for Biodegradable Temporary Implants: Computational Evaluation with Two Unit Cell Types". 2023.
    10.1007/978-3-031-38274-1_44
Livro
  1. Magrinho, J.P.; Silva, M.B.; Martins, P.A.F.. On the Characterization of Fracture Loci in Thin-Walled Tube Forming. 2021.
    10.1007/978-3-030-75381-8_9
  2. Rosa-Sainz, A.; Centeno, G.; Silva, M.B.; López-Fernández, J.A.; Martínez-Donaire, A.J.; Vallellano, C.. On the Determination of the Forming Limits by Necking and Fracture of Polycarbonate Sheet. 2021.
    10.1007/978-3-030-75381-8_214
  3. Piccininni, A.; Magrinho, J.P.; Silva, M.B.; Palumbo, G.. Formability Analysis of a Local Heat-Treated Aluminium Alloy Thin-Walled Tube. 2021.
    10.1007/978-3-030-75381-8_230
  4. Centeno, G.; Martínez-Donaire, A.J.; Morales-Palma, D.; Vallellano, C.; Silva, M.B.; Martins, P.A.F.. Novel experimental techniques for the determination of the forming limits at necking and fracture. 2015.
    10.1016/B978-0-85709-483-4.00001-6
  5. Silva, M.B.; Bay, N.; Martins, P.A.F.. Hole-flanging by single point incremental forming. 2015.
    10.1016/B978-0-85709-483-4.00002-8
  6. Kasaei, M.M.; Naeini, H.M.; Abbaszadeh, B.; Silva, M.B.; Martins, P.A.F.. Flexible roll forming. 2015.
    10.1016/B978-0-85709-483-4.00003-X
  7. Silva, M.B.; Martins, P.A.F.. Incremental Sheet Forming. 2014.
    10.1016/B978-0-08-096532-1.00301-0
  8. Araújo, R.; Teixeira, P.; Silva, M.B.; Reis, A.; Martins, P.A.F.. Single point incremental forming of a medical implant. 2013.
    10.4028/www.scientific.net/KEM.554-557.1388
  9. Silva, M.B.; Bay, N.; Martins, P.A.F.. Single-Point Incremental Forming. 2013.
    10.1002/9781118621653.ch5
  10. Silva, M.B.; Marques, T.; Martins, P.A.F.. Single-point incremental forming of polymers. 2012.
    10.1016/B978-0-85709-150-5.50008-X
Poster em conferência
  1. Nogueira, Pedro; Beatriz Rodrigues; Pedro Lopes; Luis Oliveira; Jorge Lino; João Magrinho; M. Beatriz Silva; M. Fátima Vaz; Auguso Moita de Deus. Autor correspondente: Nogueira, Pedro. "Bending properties of additively manufactured lattice structures for bone implants". Trabalho apresentado em MDA 2024 - 5TH INTERNATIONAL CONFERENCE ON MATERIALS DESIGN AND APPLICATIONS 2024, 2024.
Resumo em conferência
  1. Pedro Nogueira; Diana C. Silva; Ana Paula Serro; Pedro Lopes; Luís Oliveira; Jorge Lino Alves; Luís Reis; et al. "Evaluation of the roughness of 316 stainless steel produced by laser powder bed fusion". Trabalho apresentado em EM 2024: 2nd international conference on Engineering Manufacture, 2024.
    Aceite para publicação
  2. Pedro Nogueira; Ricardo Cláudio; Luís Reis; M. J. Carmezim; C. Santos; Pedro Lopes; Luís Oliveira; et al. "Fatigue behaviour of metallic lattice structures for bone implants". Trabalho apresentado em PCF 2024: Portuguese Conference on Fracture 2024, 2024.
    Publicado
  3. Pedro Nogueira; Kerman Castresana; J. Magrinho; M. Beatriz Silva; Augusto Moita de Deus; M. Fátima Vaz. "Evaluation of the compressive properties of different lattice geometries to be used as temporary implants". Trabalho apresentado em ISM 2022: International Conference on Industry 4.0 and Smart Manufacturing, 2022.
    Publicado
  4. Kasaei, M.M.; Oliveira, M.C.; Silva, Maria Beatriz; da Silva, Lucas F. M.. Autor correspondente: Kasaei, M.M.. "Damage analysis in hemming of advanced high strength steel sheets". Trabalho apresentado em 2nd International Conference on Advanced Joining Processes, Sintra, 2021.
Atividades

Orientação

Título / Tema
Papel desempenhado 		Curso (Tipo)
Instituição / Organização
2020/03/02 - 2023/06/02 Formability and failure of polymeric sheets: experimental assessment and medical applications
Coorientador
Universidad de Sevilla Escuela Superior de Ingenieros, Espanha
2016/01/01 - 2019/12/16 Formability of Sheet-Bulk process
Orientador
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014/03/01 - 2017/12/18 Methodology to characterize plastic flow and fracture in single point incremental sheet metal forming,
Coorientador
Universidade do Porto Faculdade de Engenharia, Portugal

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação) 		Instituição / Organização
2024/06 - Atual 44th Conference of the International Deep Drawing Research Group (IDDRG 2025) (2024/06/01 - 2025/06/05)
Conferência (Membro da Comissão Organizadora)
2019 - 2021 4th International Conference of the Portuguese Society for Engineering Education (CISPEE) (2021/06/21 - 2021/06/23)
Conferência (Membro da Comissão Organizadora)

Arbitragem científica em conferência

Nome da conferência Local da conferência
2022/05/05 - Atual International Conference in Engineering Manufacture
2021/04/14 - Atual ESAFORM - International Conference on Material Forming
2024/10/01 - 2025/01/31 53rd North American Manufacturing Research Conference Clemson University Greenville, SC
2023/11/01 - 2024/01/31 52nd North American Manufacturing Research Conference The University of Tennessee, Knoxville, Tennessee, USA
2023/09/24 - 2023/09/29 ICTP 2023 - International Conference on the Technology of Plasticity
2023/06/28 - 2023/06/30 MESIC 2023 - Manufacturing Engineering Society International Conference
2019/06/23 - 2019/06/27 NUMIFORM - 13th International Conference on Numerical Methods in Industrial Forming Processes

Arbitragem científica em revista

Nome da revista (ISSN) Editora
2020 - 2021 Metals - Special Issue - Tube and Sheet Metal Forming Processes and Applications MDPI
2019 - 2020 Materials - Special Issue - Formability of Materials MDPI
Distinções

Prémio

2022 Excellence in Teaching Award
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021 Excellence in Teaching Award
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020 Excellence in Teaching Award
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018 Innovation Award INCM 2017 - 2nd Place
Imprensa Nacional-Casa da Moeda SA, Portugal
2018 Excellence in Teaching Award
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 Excellence in Teaching Award
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016 2015 SAGE/CEGB Best Paper Award by the Editor and Editorial Board of the Journal of Strain Analysis for Engineering Design
2015 Excellence in Teaching Award
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013 Excellence in Teaching Award
Universidade de Lisboa Instituto Superior Técnico, Portugal
2010 Honourable Mention in the Young Researchers Prize from UTL/Deloitte
2008 Donald Julius Groen Prize from the Structural Technology and Materials Group of Institution of Mechanical Engineers - IMechE (UK)

Outra distinção

2021 2020 Reviewer of the Year - Journal of Manufacturing Science and Engineering
The American Society of Mechanical Engineers, Estados Unidos
2009 Merit distinction Technical University of Lisbon (UTL)