???global.info.a_carregar???
Hugo Miguel Andrade Lopes Figueiredo da Silva. Completed the Mestrado integrado in Mestrado Integrado em Engenharia de Materiais in 2011/07/31 by Universidade do Minho Escola de Engenharia and Doktor (PhD) in Ciências Técnicas, Especialidade Mecânica in 2018/09/28 by Politechnika Lodzka. Is Postdoc in Universidade do Minho - Campus de Azurém. Published 12 articles in journals. Has 2 section(s) of books and 3 book(s). Organized 58 event(s). Has received 2 awards and/or honors. Participates and/or participated as PhD Student Fellow in 1 project(s), Post-doc Fellow in 1 project(s), Research Fellow in 2 project(s) and Researcher in 1 project(s). Works in the area(s) of Engineering and Technology with emphasis on Mechanical Engineering with emphasis on Applied Mechanics, Engineering and Technology with emphasis on Mechanical Engineering and Engineering and Technology with emphasis on Materials Engineering. In his curriculum Ciência Vitae the most frequent terms in the context of scientific, technological and artistic-cultural output are: Mechanical Engineering; Mechanics of Solids, Applied Mechanics; Computational Mechanics; Finite Element (FEM); .
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Hugo Miguel Andrade Lopes Figueiredo da Silva

Nomes de citação

  • Silva, Hugo Miguel
  • Silva, H. M.

Identificadores de autor

Ciência ID
2B1B-1BB5-BABA
ORCID iD
0000-0002-2446-856X
Google Scholar ID
0lETFAwAAAAJ&hl
Researcher Id
C-4753-2019
Scopus Author Id
55574123379

Telefones

Telefone
  • (+351) 253087725 (Pessoal)
Telemóvel
  • (+351) 932286438 (Pessoal)

Moradas

  • Avenida dos Bombeiros Voluntários, 247, 1º Direito Frente, 4815-394, Vizela, Vizela, Portugal (Pessoal)

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica - Mecânica Aplicada
  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica
  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Inglês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Português Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2)
Espanhol; Castelhano Utilizador independente (B1) Utilizador independente (B1) Utilizador independente (B1) Utilizador independente (B1)
Alemão Utilizador independente (B2) Utilizador independente (B2) Utilizador independente (B2) Utilizador independente (B2)
Formação
Grau Classificação
2014/01/22 - 2018/09/28
Concluído
 Ciências Técnicas, Especialidade Mecânica (Doktor (PhD))
Politechnika Lodzka, Polónia
"Optimization of the Mechanical Behaviour of Hollow-Box beams" (TESE/DISSERTAÇÃO)
 Aprovado por unanimidade
2011/10/01 - 2013/03/28
Concluído
 Ano curricular do Programa Doutoral em Engenharia Mecânica (Curso de doutoramento (conclusão de unidades curriculares))
Universidade do Minho, Portugal
2005/09/01 - 2011/07/31
Concluído
 Mestrado Integrado em Engenharia de Materiais (Mestrado integrado)
Especialização em Não aplicável
Universidade do Minho Escola de Engenharia, Portugal
"Determination of the Material/Geometry of the section most adequate for a static loaded beams subjected to a combination of bending and torsion" (TESE/DISSERTAÇÃO)
Percurso profissional

Ciência

Categoria Profissional
Instituição de acolhimento 		Empregador
2022/04/03 - 2023/05/28 Assistente de Investigação (carreira) (Investigação) CiTin- Centro de Interface Tecnológico-Industrial, Portugal
2020/06/08 - 2021/10/31 Pós-doutorado (Investigação) Universidade do Minho - Campus de Azurém, Portugal
2019/01/21 - 2020/01/24 Investigador Contratado (Investigação) Associação para a Inovação e Desenvolvimento da FCT, Portugal
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal
2017/06/01 - 2018/12/31 Investigador (Investigação) Universidade do Minho - Campus de Azurém, Portugal
Universidade do Minho Departamento de Engenharia de Polímeros, Portugal
2017/05/01 - 2017/05/31 Investigador (Investigação) Instituto Politécnico de Leiria, Portugal
CDRSP-Centro de desenvolvimento rápido e sustentado do produto, Portugal

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento 		Empregador
2022/09/01 - 2023/07/31 Professor Adjunto Convidado (Docente Ensino Superior Politécnico) Instituto Politécnico de Viana do Castelo, Portugal
2022/05/01 - 2022/06/12 Professor Adjunto Convidado (Docente Ensino Superior Politécnico) Instituto Politécnico de Viana do Castelo, Portugal
Projetos

Bolsa

Designação Financiadores
2020/06/08 - Atual Tooling4G
UMINHO/BIPD/20 20/07
Bolseiro de Pós-Doutoramento
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Em curso
2017/06/01 - 2018/11/30 Simulation of blow-molding process based on injection
POCI-01-0145-FEDER-007688
Bolseiro de Investigação
Concluído

Projeto

Designação Financiadores
2018/06/01 - 2022/05/31 Development of a small scale triple effect desalination unit driven by solar energy
PTDC/EME-REN/28032/2017
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
2019/01/21 - 2020/01/24 Triple-Effect Small Scale Solar Desalination system
POCI-01-0145-FEDER-028032
Investigador
Instituto de Engenharia Mecanica e Gestao Industrial, Portugal

Universidade do Porto Centro de Investigação em Energias Renováveis, Portugal
Em curso
2019/01/01 - 2019/12/31 Institute of Nanostructures, Nanomodelling and Nanofabrication
UID/CTM/50025/2019
Universidade NOVA de Lisboa, Portugal

Instituto de Nanoestruturas Nanomodelação e Nanofabricação, Portugal

Universidade NOVA de Lisboa Faculdade de Ciências e Tecnologia, Portugal

UNINOVA Instituto de Desenvolvimento de Novas Tecnologias, Portugal

Universidade de Aveiro, Portugal

Universidade do Minho, Portugal

Associação para a Inovação e Desenvolvimento da FCT, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2019/01/01 - 2019/12/31 Institute of Nanostructures, Nanomodelling and Nanofabrication
UID/CTM/50025/2019
Universidade Nova de Lisboa, Portugal

Instituto de Nanoestruturas Nanomodelação e Nanofabricação, Portugal

Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal

UNINOVA Instituto de Desenvolvimento de Novas Tecnologias, Portugal

Universidade de Aveiro, Portugal

Universidade do Minho, Portugal

Universidade Nova de Lisboa Associação para a Inovação e Desenvolvimento da FCT, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2019/01/01 - 2019/12/31 Institute of Nanostructures, Nanomodelling and Nanofabrication
UID/CTM/50025/2019
Universidade Nova de Lisboa, Portugal

Instituto de Nanoestruturas Nanomodelação e Nanofabricação, Portugal

Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal

UNINOVA Instituto de Desenvolvimento de Novas Tecnologias, Portugal

Universidade de Aveiro, Portugal

Universidade do Minho, Portugal

Universidade Nova de Lisboa Associação para a Inovação e Desenvolvimento da FCT, Portugal
Fundação para a Ciência e a Tecnologia
Concluído

Outro

Designação Financiadores
2018/02/01 - 2018/09/27 Optimization of the Mechanical Behaviour of Hollow-box beams
Dean's Grant Hugo_Silva
Bolseiro de Doutoramento
Politechnika Lodzka, Polónia
Concluído
2017/05/01 - 2017/05/31 Direct Ceramic
direct.CERAMIC_17994_CDRsp_BI2
Bolseiro de Investigação
Produções

Publicações

Artigo em conferência
  1. Silva, H.M.. "A Simulation and Optimization Methodology Based on Reverse Engineering". 2023.
    10.3390/ASEC2023-15360
  2. Silva, Hugo. "Neuroevolutionary Multiobjective Optimization of Injection Stretch Blow Molding Process in the Blowing Phase, , September 12–14, 2019 Portugal". Trabalho apresentado em EUROGEN 2019, Guimarães, 2019.
    Aceite para publicação
  3. Silva, Hugo. "Neuroevolutionary Multiobjective Methodology for The Optimization of The Injection Blow Molding Process". Trabalho apresentado em 10th International Conference on Evolutionary Multi-Criterion Optimization, EMO2019, March 10-13, East Lansing, Michigan, 2019.
    Publicado • 10.1007/978-3-030-12598-1
  4. Silva, Hugo. "Neuroevolutionary multiobjective methodology for the optimization of the injection blow molding process". Trabalho apresentado em International Conference on Evolutionary Multi-Criterion Optimization EMO 2019, 2019.
    Publicado
  5. Silva, Hugo Miguel; de Meireles, José Filipe Bizarro. "Design Optimisation of Internally Reinforced Beams Subjected to Torsion Loading". Trabalho apresentado em Advanced Engineering Forum, not associated with any conference, 2018.
    Publicado • 10.4028/www.scientific.net/aef.28.1
  6. Silva, Hugo. "Design Optimisation of Internally Reinforced Beams Subjected to Bending Loading". Trabalho apresentado em Advanced Engineering Forum, not associated with any conference, 2018.
    Publicado • 10.4028/www.scientific.net/aef.28.18
  7. Silva, Hugo. "Effective Stiffness Behaviour of Sandwich Beams under Uncoupled Bending and Torsion Loadings". 2016.
    10.4028/www.scientific.net/amm.852.469
  8. Silva, Hugo. "Feasibility of Internally Reinforced Thin-Walled Beams for Industrial Applications". 2015.
    Publicado • 10.4028/www.scientific.net/amm.775.119
  9. Hugo Miguel A. L.F. Da Silva. "Reducing contamination in the printed circuit board industry for the improvement of the process and human health". Trabalho apresentado em Sho2015: International Symposium on Occupational Safety and Hygiene, 2015.
  10. Silva, Hugo. "Effective Mechanical Behavior of Sandwich Beams under Uncoupled Bending and Torsion Loadings". 2014.
    Publicado • 10.4028/www.scientific.net/amm.590.58
  11. Hugo Miguel Silva; José Filipe Bizarro de Meireles. "Determination of Material/Geometry of the Section Most Adequate for a Static Loaded Beam Subjected to a Combination of Bending and Torsion". 2012.
    10.4028/WWW.SCIENTIFIC.NET/MSF.730-732.507
Artigo em revista
  1. Silva, H.M.; de Almeida Vasques, C.M.; Rodrigues, H.L.; Noversa, J.T.; Fernandes, L.; Pontes, A.J.. "A methodology for the optimal placement of conformal cooling channels in injection molds: 2D transient heat transfer analysis". International Journal of Advanced Manufacturing Technology 132 11-12 (2024): 5261-5274. http://www.scopus.com/inward/record.url?eid=2-s2.0-85191800778&partnerID=MN8TOARS.
    10.1007/s00170-024-13474-2
  2. Silva, H.M.; Wojewoda, J.. "Sensitivity Analysis of Internally Reinforced Beams Subjected to Three-Point Bending Load". Engineering Proceedings 56 1 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85189100386&partnerID=MN8TOARS.
    10.3390/ASEC2023-15283
  3. Silva, H.M.; Rodrigues, H.L.; Noversa, J.T.; Fernandes, L.; Pontes, A.J.. "2D Heat Transfer of an Injection Mold: ANSYS Workbench and Mechanical APDL". Engineering Proceedings 56 1 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85185506855&partnerID=MN8TOARS.
    10.3390/ASEC2023-15355
  4. Silva, H.M.; Noversa, J.T.; Fernandes, L.; Rodrigues, H.L.; Pontes, A.J.. "A Design Optimization Methodology Applied to Conformal Cooling Channels in Injection Molds: 2D Transient Heat Transfer Analysis". Engineering Proceedings 56 1 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85185480348&partnerID=MN8TOARS.
    10.3390/ASEC2023-16633
  5. Silva, H.M.; Rodrigues, H.L.; Noversa, J.T.; Fernandes, L.; Pontes, A.J.. "3D Heat Transfer of an Injection Mold: ANSYS Workbench and Mechanical APDL". Engineering Proceedings 56 1 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85185513540&partnerID=MN8TOARS.
    10.3390/ASEC2023-15288
  6. Silva, H.M.; Noversa, J.T.; Rodrigues, H.L.; Fernandes, L.; Pontes, A.J.. "Structural Analysis of Molds with Conformal Cooling Channels: A Numerical Study". Engineering Proceedings 56 1 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85185474916&partnerID=MN8TOARS.
    10.3390/ASEC2023-16614
  7. Silva, H.M.; Noversa, J.T.; Fernandes, L.; Rodrigues, H.L.; Pontes, A.J.. "Design optimization of conformal cooling channels for injection molds: 3D transient heat transfer analysis". Mechanics of Advanced Materials and Structures (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85158823878&partnerID=MN8TOARS.
    10.1080/15376494.2023.2203686
  8. Silva, H.M.; Wojewoda, J.. "Determination of the Dynamic Behavior of Thin-Walled Hollow-Box Sandwich Beams". Engineering Proceedings 56 1 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85185525736&partnerID=MN8TOARS.
    10.3390/ASEC2023-15885
  9. Silva, H.M.; Wojewoda, J.. "Sensitivity Analysis of Internally Reinforced Beam-Subjected Torsion Loading". Engineering Proceedings 56 1 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85185503426&partnerID=MN8TOARS.
    10.3390/ASEC2023-15815
  10. Hugo Silva. "Design, simulation and optimization of conformal cooling channels in injection molds: a review". The International Journal of Advanced Manufacturing Technology 120 7-8 (2022): 4291-4305. http://dx.doi.org/10.1007/s00170-022-08693-4.
    10.1007/s00170-022-08693-4
  11. Silva, Hugo Miguel; Wojewoda, Jerzy. "Determination of the product of inertia of stiffened plates based on Finite Element Method results". Engineering Structures 207 (2020): 110201. http://dx.doi.org/10.1016/j.engstruct.2020.110201.
    Publicado • 10.1016/j.engstruct.2020.110201
  12. Silva, Hugo Miguel; Wojewoda, Jerzy. "Sensitivity Analysis of Internally Reinforced Thin-Walled Hollow-Box Beams Subjected to Uncoupled Bending and Torsion". Mechanics and Mechanical Engineering 23 1 (2019): 1-8. http://dx.doi.org/10.2478/mme-2019-0001.
    Publicado • 10.2478/mme-2019-0001
  13. Silva, Hugo. "Optimization of Injection Stretch Blow Molding: Part I – Defining Part Thickness Profile". International Polymer Processing, Journal of the Polymer Processing Society 34 3 (2019): 314-323. http://dx.doi.org/10.3139/217.3746.
    Publicado • 10.3139/217.3746
  14. Denysiuk, R.; Gonçalves, N.; Pinto, R.; Silva, H.; Duarte, F.; Nunes, J.; Gaspar-Cunha, A.. "Optimization of Injection Stretch Blow Molding: Part I – Defining Part Thickness Profile". International Polymer Processing 34 3 (2019): 314-323. http://dx.doi.org/10.3139/217.3746.
    10.3139/217.3746
  15. Silva, H.M.; Wojewoda, J.. "Sensitivity analysis of internally reinforced thin-walled hollow-box beams subjected to uncoupled bending and torsion". Mechanics and Mechanical Engineering 23 1 (2019): 1-8. http://www.scopus.com/inward/record.url?eid=2-s2.0-85069891060&partnerID=MN8TOARS.
    Publicado • 10.2478/mme-2019-0001
  16. Silva, H.M.; Meireles, J.F.; Wojewoda, J.. "Structural optimization coupled with materials selection for stiffness improvement". Mechanics and Mechanical Engineering 22 4 (2018): 831-844. http://www.scopus.com/inward/record.url?eid=2-s2.0-85064386470&partnerID=MN8TOARS.
    Acesso aberto • Publicado
  17. Silva, H.M.; Meireles, J.F.; Wojewoda, J.. "Experimental validation of a novel thin-walled beam prototype". Mechanics and Mechanical Engineering 22 1 (2018): 7-23. http://www.scopus.com/inward/record.url?eid=2-s2.0-85072958368&partnerID=MN8TOARS.
    Acesso aberto • Publicado
  18. Silva, H. M.; Carvalho, C. D.; Peixinho, N. R.. "Elasto-Plastic Behavior of Aluminum Foams Subjected to Compression Loading". International Applied Mechanics 53 3 (2017): 356-360. http://dx.doi.org/10.1007/s10778-017-0818-2.
    10.1007/s10778-017-0818-2
  19. Silva, H.M.; Meireles, J.F.. "Structural optimization of internally reinforced beams subjected to uncoupled and coupled bending and torsion loadings for industrial applications". Mechanics and Mechanical Engineering 21 2 (2017): 329-351. http://www.scopus.com/inward/record.url?eid=2-s2.0-85044749645&partnerID=MN8TOARS.
    Acesso aberto • Publicado
  20. Lopes Figueiredo Da Silva, H.M.A.; Costa, M.J.; De Meireles, J.F.B.. "Motivation in mechanics of materials classes: An experimental approach". International Journal of Mechanical Engineering Education 45 4 (2017): 330-348. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029507420&partnerID=MN8TOARS.
    Publicado • 10.1177/0306419017708643
  21. Silva, H.M.; Meireles, J.F.. "Numerical study on the mechanical behaviour of hollow-box beams subjected to static loading". Mechanics and Mechanical Engineering 21 4 (2017): 871-884. http://www.scopus.com/inward/record.url?eid=2-s2.0-85069915047&partnerID=MN8TOARS.
    Acesso aberto • Publicado
  22. Silva, H.M.; Meireles, J.F.. "Comparative effectiveness of the mechanical behaviour of sandwich beams under uncoupled bending and torsion loadings". Mechanics and Mechanical Engineering 21 4 (2017): 855-869. http://www.scopus.com/inward/record.url?eid=2-s2.0-85069936642&partnerID=MN8TOARS.
    Acesso aberto • Publicado
  23. N. R. Peixinho; C. D. Carvalho; Hugo Miguel A. L.F. Da Silva. "ELASTO-PLASTIC BEHAVIOR OF ALUMINUM FOAMS SUBJECTED TO COMPRESSION LOADING". International Applied Mechanics (2017): https://publons.com/publon/19255750/.
    10.1007/S10778-017-0818-2
Capítulo de livro
  1. Pinto, Renê S.; Silva, Hugo M.; Duarte, Fernando M.; Nunes, João P.; Gaspar-Cunha, António. "Neuroevolutionary Multiobjective Optimization of Injection Stretch Blow Molding Process in the Blowing Phase". In Advances in Evolutionary and Deterministic Methods for Design, Optimization and Control in Engineering and Sciences, 307-318. Springer International Publishing, 2021.
    Publicado • 10.1007/978-3-030-57422-2_20
  2. Pinto, Renê; Silva, Hugo; Duarte, Fernando; Nunes, Joao; Gaspar-Cunha, Antonio. "Neuroevolutionary Multiobjective Methodology for the Optimization of the Injection Blow Molding Process". In Evolutionary Multi-Criterion Optimization, 743-754. Springer International Publishing, 2019.
    10.1007/978-3-030-12598-1_59
Livro
  1. Pinto, Renê S.; Silva, Hugo M.; Duarte, Fernando M.; Nunes, João P.; Gaspar-Cunha, A.. Neuroevolutionary multiobjective optimization of injection stretch blow molding process in the blowing phase. Springer. 2021.
    10.1007/978-3-030-57422-2_20
  2. Pinto, R.; Silva, H.; Duarte, F.; Nunes, J.; Gaspar-Cunha, A.. Neuroevolutionary multiobjective methodology for the optimization of the injection blow molding process. 2019.
    10.1007/978-3-030-12598-1_59
  3. Silva, H.M.; Meireles, J.F.. Effective mechanical behavior of sandwich beams under uncoupled bending and torsion loadings. 2014.
    10.4028/www.scientific.net/AMM.590.58
  4. Silva, H.M.; Meireles, J.F.. Determination of material/geometry of the section most adequate for a static loaded beam subjected to a combination of bending and torsion. 2013.
    10.4028/www.scientific.net/MSF.730-732.507
Poster em conferência
  1. Silva, Hugo. "Optimization of Injection Blow Molding: Part I - Defining Part Thickness, Profile". Trabalho apresentado em Polímeros2018, Workshop on Polymeric Materials, Centro Cultural Vila Flor, Guimarães, Portugal, 2018.
  2. Silva, Hugo. "Feasibility of sandwich beams under uncoupled bending and torsion loadings". Trabalho apresentado em Meeting of the doctoral program in Mechanical Engineering, University of Minho, Guimarães, Portugal, 2015.
  3. Silva, Hugo. "Effective Mechanical Behavior of sandwich beams under uncoupled bending and torsion loadings". Trabalho apresentado em Day of the Department of Mechanical Engineering, University of Minho, Guimarães, Portugal, 2014.
Resumo em conferência
  1. Silva, Hugo. "Optimization of preform thickness distribution in the blowing phase of injection blow molding". Trabalho apresentado em CMN 2019 - Congress on Numerical Methods in Engineering,, Guimarães, July 1 - 3, 2019, 2020.
    Publicado
  2. Silva, Hugo. "Optimization of Preform Thickness Distribution in the Blowing Phase of Injection Blow Moulding". Trabalho apresentado em Congresso de Métodos Numéricos em Engenharia, Guimarães, 2020.
    Publicado
  3. Silva, Hugo. "Optimization of the Mechanical Behaviour of Hollow-Box Beams". Trabalho apresentado em Stability of Structures XV-th Symposium, Zakopane, 2019.
    Aceite para publicação
  4. Su, H.; Cheung, C.W.; Banerjee, J.R.. "Effective Stiffness Behavior of sandwich beams under uncoupled bending and torsion loadings". Trabalho apresentado em International Conference on Recent Advances in Materials, Mechanical and Civil Engineering ICRAMMCE2017, Hyderabad, 2018.
    Publicado • 10.4203/ccp.77.74
  5. Silva, Hugo. "Determination of material/geometry of the section most adequate for a static loaded beam subjected to a combination of bending and torsion". Trabalho apresentado em International Materials Science Symposium, MATERIAIS2011, Guimarães, 2013.
    Aceite para publicação
Tese / Dissertação
  1. Silva, Hugo. "Optimization of the Mechanical Behavior of hollow-box beams". Doutoramento, Politechnika Lodzka, 2018. https://www.p.lodz.pl/pl.
  2. Silva, Hugo. "H.M. Silva, 2011, Determination of the Material/geometry of the section most adequate for a static loaded beam subjected to a combination of bending and torsion". Mestrado, Universidade do Minho, 2011. www.uminho.pt.

Propriedade Intelectual

Pedido provisório de patente
  1. 2020. "H.M. Silva, J. Wojewoda, J.F. Meireles, “Belka nosna typu skrzynka z przekladkami “[in Polish] [Submitted to the Patent Office of Lodz University of Technology]".
    Protegido

Outros

Outra produção
  1. Structural analysis of molds with conformal cooling channels: A numerical study. 2021. Silva, H.M.; Noversa, T.; Rodrigues, H.; Fernandes, L.; Pontes, A.. http://www.scopus.com/inward/record.url?eid=2-s2.0-85168031836&partnerID=MN8TOARS.
    10.21203/rs.3.rs-1051523/v1
  2. 2D Heat Transfer Simulation of an Injection Mold: Comparison Between ANSYS Workbench and ANSYS Mechanical APDL. 2021. Silva, H.M.; Rodrigues, H.L.; Noversa, J.T.; Fernandes, L.; Pontes, A.J.. http://www.scopus.com/inward/record.url?eid=2-s2.0-85166899907&partnerID=MN8TOARS.
    10.21203/rs.3.rs-1162715/v1
  3. Sensitivity analysis of conformal CCs for injection molds: 2D Transient Heat Transfer Analysis. 2021. Silva, H.M.; Noversa, T.; Fernandes, L.; Rodrigues, H.; Pontes, A.. http://www.scopus.com/inward/record.url?eid=2-s2.0-85168034713&partnerID=MN8TOARS.
    10.21203/rs.3.rs-958556/v1
  4. Sensitivity analysis of conformal CCs for injection molds: 3D transient heat transfer analysis. 2021. Silva, H.M.; Noversa, J.T.; Fernandes, L.; Rodrigues, H.L.; Pontes, A.J.. http://www.scopus.com/inward/record.url?eid=2-s2.0-85168032611&partnerID=MN8TOARS.
    10.21203/rs.3.rs-1017226/v1
  5. 3D heat transfer simulation of an injection mold: Comparison between ANSYS workbench and ANSYS mechanical APDL. 2021. Silva, H.M.; Fernandes, L.; Rodrigues, H.L.; Noversa, J.T.; Pontes, A.J.. http://www.scopus.com/inward/record.url?eid=2-s2.0-85168031387&partnerID=MN8TOARS.
    10.21203/rs.3.rs-1017293/v1
  6. Design Optimization of Conformal Cooling Channels For Injection Molds: 2D Transient Heat Transfer Analysis. 2021. Silva, H.M.; Noversa, T.; Fernandes, L.; Rodrigues, H.; Pontes, A.. http://www.scopus.com/inward/record.url?eid=2-s2.0-85168033374&partnerID=MN8TOARS.
    10.21203/rs.3.rs-987115/v1
  7. Parametrization code in APDL of complex FEM models, during Ph.D.. Scripting in APDL of Finite Element Method models built in ANSYS Mechanical APDL of 24 models in total: Programming of: -Design variables  -Outputs. 2018. Silva, Hugo.
  8. Technical report. Position Paper developed in ICCES’14 at BOSCH. . 2014. Silva, Hugo.
  9. Technical report. Research plan developed in ICCES’14 at BOSCH. . 2014. Silva, Hugo.
  10. Parametrization code in APDL of FEM models, in the scope of MSc. thesis. Scripting in APDL of Finite Element Method models built in ANSYS Mechanical APDL , 2 models in total. Programming of: -Design variables -Outputs. 2011. Silva, Hugo.
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2019/06/06 Triple-Effect Small Scale Solar Desalination system", Task 2: Selection of solar collector and design of the collector subsystem 2nd progress meeting of the project Small-SolDes
Faculty of Engineering of the University of Porto (Porto, Portugal)
2019/06/06 Triple-Effect Small Scale Solar Desalination system", Task 4: On the selection of materials for the components of the Small-SolDes system 2nd progress meeting
Faculty of Engineering of the University of Porto (Porto, Portugal)
2018/09/19 Optimization of the Mechanical Behaviour of Hollow-Box Beams Stability of Structures XV-th Symposium – September 17-21
Bialy Potok" Hotel, Zakopane, Poland (Zakopane, Polónia)
2014/06/12 Final Presentation ICCES’14- Innovation and Creativity for Complex Engineering Systems:
Robert Bosch GmbH, Braga, Portugal. (Braga, Portugal)
2014/06/05 1st Presentation ICCES’14- Innovation and Creativity for Complex Engineering Systems,
Robert Bosch GmbH, Braga, Portugal. (Braga, Portugal)
2014/06/03 ICCES’14- Innovation and Creativity for Complex Engineering Systems: Presentation about multicultural issues ICCES’14- Innovation and Creativity for Complex Engineering Systems
Robert Bosch GmbH, Braga, Portugal (Braga, Portugal)
2011/04/19 Determination of material/geometry of the section most adequate for a static loaded beam subjected to a combination of bending and torsion, International Materials Science Symposium, MATERIAIS2011
University of Minho, Guimaraes, Portugal (Guimarães, Portugal)
2011 Project and development of Micro-structured materials with high-specific strength SIM- Scientific Interaction Meetings, 2011
University of Minho, Campus of Azurém (Guimarães, Portugal)

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação) 		Instituição / Organização
2020/11/18 - 2020/11/20 Technical Program Committee at the: 6th International Conference on Structure, Engineering and Environment https://www.confsee.com/tpc (2020/11/18 - 2020/11/20)
Conferência (Membro da Comissão Científica)
2020 - 2020 External Review Committee at the: 2020 4th International Conference on Aerospace, Mechanical and Mechatronic Engineering http://www.camme.org/committee.html (2020/03/23 - 2020/03/25)
Conferência (Membro da Comissão Científica)
2020 - 2020 International Scientific Committee at the: ACMME 8th Asia Conference on Mechanical and Materials Engineering http://acmme.org/committees.html (2020/06/11 - 2020/06/14)
Conferência (Membro da Comissão Científica)
2020 - 2020 International Scientific Committee at the : 2020 4th International Conference on Electrical, Automation and Mecanical Engineering (EAME2020) http://www.4th-eame.org/com.html (2020/06/21 - 2020/06/22)
2020 - 2020 International Scientific Committee at the: 2020 3rd International Joint Conference on Materials Science and Mechanical Engineering http://www.cmsme.net/comm.html (2020/01/10 - 2020/01/12)
2020 - 2020 TPC (Technical Program Committee) at the : 2020 7th International Conference on Mechanical, Materials and Manufacturing http://www.icmmm.org/com.html (2020/09/25 - 2020/09/27)
Conferência (Membro da Comissão Científica)
2020 - 2020 TPC (Technical Program committee) at the: 2020 3rd International Conference on Mechatronics, Control and Robotics http://www.icmcr.org/committee.html (2020/02/22 - 2020/02/24)
2020 - 2020 Technical committee at the: 2020 2nd International Conference on Mechanical, Aerospace and Automotive Engineering http://www.cmaae.org/com.html (2020/10/16 - 2020/10/18)
2020 - 2020 TPC (Technical Program committee) at the: 2019 3rd International Conference on Material Engineering and Manufacturing http://www.icmem.org/committees.html (2019/05/25 - 2019/05/27)
2020 - 2020 International Technical committee at the: 2020 8th Asia Conference on Mechanical and Materials Engineering http://acmme.org/committees.html (2020/06/11 - 2020/06/14)
2020 - 2020 Committee at the : 2020 3rd International Conference on Robotics and Intelligent Technology http://www.icrit.org/committee.html (2020/05/20 - 2020/05/22)
Conferência (Membro da Comissão Científica)
2020 - 2020 Technical committee at the: 2020 9th International Conference on Material Science and Engineering Technology http://www.icmset.com/com.html (2020/10/09 - 2020/10/12)
Conferência (Membro da Comissão Científica)
2020 - 2020 International Scientific Committee-Europe 2020 2nd International Joint Conference on Materials Science and Mechanical Engineering http://www.cmsme.net/comm.html (2020/01/10 - 2020/01/12)
2020 - 2020 International Scientific Committee - Europe 2019 2nd International Joint Conference on Materials Science and Mechanical Engineering http://www.cmsme.net/comm.html (2020/01/10 - 2020/01/12)
Conferência (Membro da Comissão Científica)
2020 - 2020 Academic Member at the: 2020 4th International Conference on Composite Material, Polymer Science and Engineering http://www.cmpse.org/committees.html (2020/09/19 - 2020/09/20)
Conferência (Outra)
2020 - 2020 Technical Committee at the: 2020 3rd International Conference on Metal Material Processes and Manufacturing http://www.icmmpm.org/committee.html (2020/05/16 - 2020/05/17)
Conferência (Membro da Comissão Científica)
2019/12/27 - 2019/12/29 General chair at the: 2019 International Conference on Mechatronics, Control and Automation Engineering (ICMCAE2019) http://www.icmcae.org/com.html (2019/12/27 - 2019/12/29)
Conferência (Presidente da Comissão Organizadora)
2019/11/24 - 2019/11/25 Publication chair at the: 2019 International Conference on Computational Modeling, Simulation and Optimization (2019/11/24 - 2019/11/25)
Conferência (Membro da Comissão Científica)
2019/07/19 - 2019/07/21 Publication Chair (Editor) at the: 2019 2nd International Conference on Electrical Mechanical and Industrial Engineering, http://www.icemie2019.org/com.html (2019/07/19 - 2019/07/21)
Conferência (Outra)
2019/07/19 - 2019/07/21 Editor of the proceedings of the: International Conference on Advanced Mechanical and Electrical Engineering (AMEE) (2019/07/19 - 2019/07/21)
Conferência (Membro da Comissão Científica)
2019/02/27 - 2019/02/28 General Chair at the: 2019 International Conference on Modeling, Simulation, Optimization and Numerical Techniques http://www.smont2019.org/com.html (2019/02/27 - 2019/02/28)
Conferência (Presidente da Comissão Organizadora)
2019 - 2019 External Review Committee at the: 2019 3rd International Conference on Aerospace, Mechanical and Mechatronic Engineering http://www.camme.org/committee.html (2019/02/21 - 2019/02/24)
Conferência (Membro da Comissão Científica)
2019 - 2019 International Scientific Committee at the: 2019 International conference on Computational Modeling, Simulation and Optimization (CMSO2019) www.cmso2019.org/com.html (2019/11/24 - 2019/11/25)
Conferência (Membro da Comissão Científica)
2019 - 2019 International Scientific Committee at the : 2019 The 10th Asia Conference on Mechanical and Aerospace Engineering (ACMAE) http://www.acmae.com/committee.html (2019/12/26 - 2019/12/28)
2019 - 2019 International Scientific Committee at the: 2019 International Conference on Modeling, Analysis, Simulation Technologies and Applications (MASTA2019) http://www.masta2019.org/com.html (2019/05/26 - 2019/05/27)
2019 - 2019 International Scientific Committee at the: 2019 The 3rd International Conference of Material Engineering and Manufacturing http://www.icmem.org/committees.html (2019/05/25 - 2019/05/27)
2019 - 2019 International Scientific Committee at the: 2019 2nd International Joint Conference on Materials Science and Mechanical Engineering http://www.cmsme.net/comm.html (2019/01/18 - 2019/01/20)
2019 - 2019 2019 International Conference on Advanced Electrical, Mechatronics and Computer Engineering http://www.aemce-conf.com/com.html (2019/02/27 - 2019/02/28)
2019 - 2019 International Scientific Committee at the: 2019 2nd International Conference on Informatics, Control and Automation http://www.2nd-ica.org/com.html (2019/05/26 - 2019/05/27)
2019 - 2019 TPC (Technical Program Committee) on the : 2019 6th International Conference on Mechanical, Materials and Manufacturing http://www.icmmm.org/com.html (2019/10/12 - 2019/10/14)
2019 - 2019 Technical Committee at the: 2019 International Conference on Mechanical, Aerospace and Automotive Engineering http://www.cmaae.org/com.html (2019/10/15 - 2019/10/17)
Conferência (Membro da Comissão Científica)
2019 - 2019 2019 International Conference on Mechanical, Aerospace and Automotive Engineering http://www.cmaae.org/com.html (2019/10/15 - 2019/10/17)
2019 - 2019 TPC (Technical Program committee) at the: 2018 The 9th Asia Conference on Mechanical and Aerospace Engineering http://www.acmae.com/ (2018/12/29 - 2018/12/31)
2019 - 2019 2019 3rd International Conference on Material Engineering and Manufacturing http://www.icmem.org/committees.html (2019/05/25 - 2019/05/27)
Conferência (Membro da Comissão Científica)
2019 - 2019 Conference Technical Committees at the: 2019 The 7th International Conference on Nanomaterials and Materials Engineering http://www.icnme.org/com.html (2019/10/25 - 2019/10/27)
2019 - 2019 2019 7th Asia Conference on Mechanical and Materials Engineering http://acmme.org/committees.html (2019/06/14 - 2019/06/17)
Conferência (Membro da Comissão Científica)
2019 - 2019 Committee at the: 2019 2nd International Conference on Robotics and Intelligent Technology http://www.icrit.org/committee.html (2019/05/25 - 2019/05/27)
Conferência (Membro da Comissão Científica)
2019 - 2019 Technical Committee at the: 2019 The 5th International Conference on Mechanical Design and Engineering http://www.icmde.org/com.html (2019/03/16 - 2019/03/19)
Conferência (Membro da Comissão Científica)
2019 - 2019 General Chair at the: 2019 International Conference on Mechatronics, Control and Automation Engineering (ICMCAE2019) (2019/12/27 - 2019/12/29)
Conferência (Presidente da Comissão Organizadora)
2019 - 2019 International Scientific Committees at the: 2019 International Conference on Advanced Electrical, Mechatronics and Computer Engineering http://www.aemce-conf.com/com.html (2019/02/27 - 2019/02/28)
Conferência (Membro da Comissão Científica)
2019 - 2019 International Scientific Committee 2019 2nd International Joint Conference on Materials Science and Mechanical Engineering http://www.cmsme.net/comm.html (2019/01/18 - 2019/01/20)
2019 - 2019 Technology Program Committee at the: 2019 4th International Seminar on Advances in Materials Science and Engineering (ISAMSE 2019). http://isamse.org/a/Committee/ (2019/08/16 - 2019/08/18)
2019 - 2019 Editor at the: 2019 International Conference on Modeling, Simulation, Optimization and Numerical Techniques http://www.smont2019.org/com.html (2019/02/27 - 2019/02/28)
2018 - 2018 Technical Committee 2018 7th International Conference on Material Science and Engineering Technology http://www.icmset.com/com.html (2018/10/20 - 2018/10/22)
2018 - 2018 2018 3rd International Seminar on Computer Technology, Mechanical and Electrical Engineering http://iscme.org/a/Committee/ (2018/08/17 - 2018/08/19)
Conferência (Membro da Comissão Científica)
2018 - 2018 Technical Committee at the: 2018 International Conference on Advanced Mechanical and Electrical Engineering (AMEE) http://www.amee.net/org.html (2018/12/26 - 2018/12/28)
2018 - 2018 International Scientific Committee at the: 2018 4th International Conference on Applied Mechanics and Mechanical Automation http://www.amma2018.org/com.html (2018/10/28 - 2018/10/29)
2018 - 2018 International Scientific Committee at the: 2018 International Conference on Electrical, Mechanical and Automation Engineering http://www.emae2018.org/com.html (2018/12/22 - 2018/12/23)
Conferência (Membro da Comissão Científica)
2018 - 2018 International Scientific Committee at the: 2018 International Conference on Computer, Electronic and Mechanical Engineering http://www.ceme2018.org/com.html (2018/07/22 - 2018/07/23)
2018 - 2018 2018 3rd International Conference on Automation, Mechanical and Electrical Engineering (AMEE 2018) http://www.3rd-amee.org/com.html (2018/07/22 - 2018/07/23)
Conferência (Membro da Comissão Científica)
2018 - 2018 International Scientific Committee at the: 2018 4th International Conference on Applied Mechanics and Mechanical Automation http://www.amma2018.org/com.html (2018/10/28 - 2018/10/29)
Conferência (Membro da Comissão Científica)
2018 - 2018 International Scientific Committee at the: 2018 International Conference on Electrical, Mechanical and Automation Engineering http://www.emae2018.org/com.html (2018/12/22 - 2018/12/23)
2018 - 2018 2018 International Conference on Computer, Electronic and Mechanical Engineering http://www.ceme2018.org/com.html (2018/07/22 - 2018/07/23)
Conferência (Membro da Comissão Científica)
2018 - 2018 International Scientific Committee at the: 2018 International Conference on Advanced Electrical Engineering and Automation (AEEA2018) http://www.aeea2018.org/com.html (2018/05/27 - 2018/05/28)
Conferência (Membro da Comissão Científica)
2018 - 2018 International Scientific Committee at the: 2018 International Conference on Computer, Electronic and Mechanical Engineering http://www.ceme2018.org/com.html July 22-23, 2018 (2018/07/22 - 2018/07/23)
2018 - 2018 International Technical Committee at the: International Conference on Power, Energy and Intelligent Materials, 2018 http://www.peim2018.org/com.html (2018/06/29 - 2018/06/30)
Conferência (Membro da Comissão Científica)
2018 - 2018 International Scientific Committee at the: International Conference on Electrical, Control, and Mechanical Engineering, 2018 http://www.ecme2018.org/com.html (2018/04/22 - 2018/04/23)
Conferência (Membro da Comissão Científica)
2018 - 2018 International Scientific Committee at the: International Conference on Modeling, Simulation and Analysis, 2018 http://www.icmsa2018.org/com.html (2018/02/07 - 2018/02/08)
Conferência (Membro da Comissão Organizadora)

Arbitragem científica em conferência

Nome da conferência Local da conferência
2020 - Atual
2021/04/19 - 2021/04/21 2021 4th International Joint Conference on Materials Science and Mechanical Engineering (CMSME 2021) Singapore on April 19-21, 2021.
2020/12/20 - 2020/12/21 2020 International Conference on New Energy, Power and Environmental Engineering (NEPEE2020) Xiamen, China
2020/11/23 - 2020/11/24 International Conference on Mechanical Engineering, Materials Science and Civil Engineering Bangkok, Thailand
2020/11/20 - 2020/11/22 International Conference on Chemical Science and Engineering (ICCSE) Macao, China
2020/11/18 - 2020/11/20 6th International Conference on Structure, Engineering and Environment Kyoto Japan
2020/11/11 - 2020/11/13 International Conference on Advanced Electrical Engineering and Automation Melbourne, Australia
2020/10/09 - 2020/10/12 International Conference on Material Science and Engineering Technology Kyoto, Japan
2020/09/25 - 2020/09/27 International Conference on Mechanical, Materials and Manufacturing (ICMMM) Washington, USA
2020/08/26 - 2020/08/28 International Conference on Mechanical Manufacturing and Industrial Engineering (MMIE) Tokyo, Japan
2020/08/10 - 2020/08/13 International Conference on Material Strength and Applied Mechanics Macao, China
2020/07/24 - 2020/07/26 International Conference on Environment, Resources and Energy Engineering Singapore
2020/06/21 - 2020/06/22 International Conference on Electrical, Automation and Mechanical Engineering Beijing, China
2020/05/20 - 2020/05/22 International Conference on Robotics and Intelligent Technology May 20-22, 2020. Okinawa, Japan
2020/04/10 - 2020/04/13 4th International Conference on Material Engineering and Manufacturing (ICMEM 2020) Tokyo, Japan
2020/03/23 - 2020/03/25 International Conference on Aerospace, Mechanical and Mechatronic Engineering Nagoya, Japan
2020/02/26 - 2020/02/28 International Conference on Mechanical Design and Engineering (ICMDE) Bangkok, Thailand
2020/02/22 - 2020/02/24 International Conference on Mechatronics, Control and Robotics Tokyo, Japan
2020/01/10 - 2020/01/12 International Joint Conference on Materials Science and Mechanical Engineering (CMSME) Athens, Greece on Jan. 10-12, 2020.
2019/12/27 - 2019/12/29 International Conference on Mechatronics, Control and Automation Engineering Guangzhou, China
2019/12/26 - 2019/12/28 Asia Conference on Mechanical and Aerospace Engineering (ACMAE) Bangkok, Thailand
2019/12/19 - 2019/12/21 International Conference on Mechanical Engineering and Power Engineering Auckland, New Zealand
2019/12/16 - 2019/12/18 International Conference on Mechanical Engineering and Robotics Research (ICMERR) Budapest, Hungary
2019/11/16 - 2019/11/18 International Conference on Advanced Mechanical and Electrical Engineering (AMEE) Lanzhou, China
2019/11/16 - 2019/11/18 International Conference on Robotics, Control and Automation Engineering Lanzhou, China
2018 - 2019 Advanced Engineering Forum, Trans Tech Publications
2018/05/27 - 2018/05/28 International Conference on Geotechnique, Construction Materials and Environment Sanya, China

Arbitragem científica em revista

Nome da revista (ISSN) Editora
2018 - 2019 International Journal of Mechanical Engineering Education (0306-4190) SAGE
2014 - 2014 American Journal of Mechanics and Applications (2376-6115) Science Publishing Group
Distinções

Outra distinção

2018 "Dean's Scholarship" para estudos de doutoramento na Universidade Técnica de Lodz, Polónia
2017 Article indexed in the scientific library of the Harvard University
Harvard University, Estados Unidos