???global.info.a_carregar???
Samruddha Kokare is currently a MIT Portugal PhD fellow in Industrial Engineering at NOVA School of Science and Technology, Universidade NOVA de Lisboa where he is working on the development of environmentally friendly and cost-efficient additive manufacturing. He obtained a master's degree in Production Engineering and Management from KTH Royal Institute of Technology, Sweden in 2021 and a bachelor's degree in Production Engineering from the National Institute of Technology Tiruchirappalli, India in 2018. His areas of research interest encompass sustainable manufacturing, circular economy, environmental impact assessment of traditional manufacturing processes, and additive manufacturing. Before joining the doctoral program, Samruddha gained some industrial experience in sustainable manufacturing in Sweden for 2 years. He worked as a contracted research engineer at Mycronic AB where he conducted an environmental footprint study of a jet printing machine used in the production of printed circuit boards. He also worked as a consultant in industrial projects focused on circular economy with Circular Business and Engineering Systems (CirBES) AB. During his master's studies, Samruddha worked as an intern in a cutting tool production plant of Sandvik Cormorant AB in Sweden. He assisted in developing a sustainable and cost-efficient deburring solution for manufacturing drilling tools. Samruddha has also been a part of 3 international research projects namely: "Smart WAAM: Microstructural Engineering and Integrated Non-Destructive Testing-S: WAAM", "Resource-efficient Circular Product-Service Systems - ReCiPSS" and "Soft Intelligence Epidermal Communication Platform- SINTEC" funded by the European Commission. He has published 3 research articles based on the environmental assessment of industrial products and processes in reputed peer-reviewed journals like "Additive Manufacturing" (Elsevier), "Advances in Industrial and Manufacturing Engineering" (Elsevier), and the "International Journal of Environmental Science and Technology" (Springer). He has also presented his research at international conferences held in Portugal, Austria, and the United Kingdom. Samruddha has been awarded several academic awards. During his bachelor's studies, he received a "Working Internship in Science and Engineering (WISE) 2017" scholarship from the German Academic Exchange Service (DAAD) to carry out a research internship at TU Clausthal in Germany. He was awarded the "Best Outgoing Student Award 2018" in Production Engineering and secured the first position in his bachelor's program at the National Institute of Technology Tiruchirappalli, India. Additionally, he received a fully funded master's scholarship instituted by the KTH India foundation to pursue master's studies at KTH Royal Institute of Technology in Sweden during 2018-2020. In 2022, he won the award for the best oral presentation at the 12th International Conference on Industrial Technology and Management held in Cambridge, United Kingdom.
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Samruddha Kokare

Nomes de citação

  • Kokare, Samruddha

Identificadores de autor

Ciência ID
7F1F-98D3-89F8
ORCID iD
0000-0003-1168-9803
Google Scholar ID
https://scholar.google.se/citations?user=c5tqshYAAAAJ&hl=sv
Scopus Author Id
57223920541

Endereços de correio eletrónico

  • s.kokare@campus.fct.unl.pt (Profissional)

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica - Engenharia Mecânica

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Inglês Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2) Utilizador proficiente (C2)
Marati (Idioma materno)
Hindi (Idioma materno)
Português Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Sueco Utilizador elementar (A2) Utilizador elementar (A2) Utilizador elementar (A2) Utilizador elementar (A2) Utilizador elementar (A2)
Formação
Grau Classificação
2021/09/01 - 2025/09/01
Em curso
 PhD in Industrial Engineering (Doutoramento)
Especialização em Industrial Engineering
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal
2018/08/27 - 2021/05/26
Concluído
 Production Engineering and Management (Masterexamen)
Especialização em Production Engineering and Management
Kungliga Tekniska Hogskolan Industriell teknik och management, Suécia
"Comparative Life Cycle Assessment of Cardiac Monitoring Devices: A Case Study" (TESE/DISSERTAÇÃO)
 17/20
2014/08/14 - 2018/05/18
Concluído
 Bachelor of Technology (Bachelor)
Especialização em Production Engineering
National Institute of Technology Tiruchirappalli, Índia
"Spark Plasma Sintering of Nano Crystalline NiTi Powders: Modelling, Simulation and Experiments" (TESE/DISSERTAÇÃO)
 9.58/10
Percurso profissional

Ciência

Categoria Profissional
Instituição de acolhimento 		Empregador
2021/06/01 - 2023/05/31 Investigador Contratado (Investigação) Universidade Nova de Lisboa Departamento de Engenharia Mecânica e Industrial, Portugal
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal
2021/01/01 - 2021/05/30 Investigador Contratado (Investigação) CirBES Circular Business and Engineering Systems AB, Suécia
2020/06/01 - 2020/12/31 Investigador Contratado (Investigação) Mycronic AB, Suécia
2019/09/01 - 2019/12/01 Estagiário de Investigação (Investigação) Sandvik Coromant Sverige AB, Suécia
2017/05/01 - 2017/08/01 Assistente de Investigação (carreira) (Investigação) Technische Universität Clausthal, Alemanha
Projetos

Bolsa

Designação Financiadores
2021/06/01 - Atual Smart WAAM: Microstructural Engineering and Integrated Non-Destructive Testing
Bolseiro de Integração na Investigação
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal
 European Institute of Innovation & Technology
Em curso
2021/01/01 - 2021/06/30 Resource-efficient Circular Product-Service Systems -ReCiPSS
Investigador
Kungliga Tekniska Högskolan, Suécia
 European Commission

Horizon 2020
Concluído
2020/01/01 - 2020/06/30 Soft Intelligence Epidermal Communication Platform (SINTEC)
Bolseiro de Mestrado
Mycronic AB, Suécia
 European Commission

Horizon 2020
Concluído

Projeto

Designação Financiadores
2023/06/01 - 2023/12/31 Advanced Forming Technologies
DEV-AFT-TN-009
Bolseiro de Doutoramento
Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal

Omnidea Lda, Portugal
Omnidea Lda
Concluído
2020/06/01 - 2020/12/31 Life Cycle Assessment of a Jet Printing Machine (MYLCA)
Investigador
Mycronic AB, Suécia
 Mycronic AB
Concluído
Produções

Publicações

Artigo em revista
  1. Samruddha Kokare; Jiajia Shen; Pedro P. Fonseca; João G. Lopes; Carla M. Machado; Telmo G. Santos; João P. Oliveira; Radu Godina. "Wire arc additive manufacturing of a high-strength low-alloy steel part: environmental impacts, costs, and mechanical properties". The International Journal of Advanced Manufacturing Technology (2024): https://doi.org/10.1007/s00170-024-14144-z.
    10.1007/s00170-024-14144-z
  2. Samruddha Kokare; Luis Moraes; Nuno Fernandes; Andrew Norman; Radu Godina. "Toward cleaner space explorations: a comparative life cycle assessment of spacecraft propeller tank manufacturing technologies". The International Journal of Advanced Manufacturing Technology (2024): https://doi.org/10.1007/s00170-024-13745-y.
    10.1007/s00170-024-13745-y
  3. Kokare, Samruddha; Shoaib-ul-Hasan, Sayyed; Asif, Farazee M.A.; Mårtensson, Gustaf; Svanteson, Kristina. "Life Cycle Assessment of a Jet Printing and Dispensing Machine". Procedia Computer Science 232 (2024): 708-718. http://dx.doi.org/10.1016/j.procs.2024.01.070.
    10.1016/j.procs.2024.01.070
  4. J.F. Baptista; S. Kokare; A.V. Francisco; R. Godina; D. Aelenei. "A comparative life cycle assessment of ETICS and ventilated façade systems with timber cladding". Energy and Buildings (2023): https://doi.org/10.1016/j.enbuild.2023.113842.
    10.1016/j.enbuild.2023.113842
  5. Kokare, Samruddha; Oliveira, J.P.; Godina, Radu. "A LCA and LCC analysis of pure subtractive manufacturing, wire arc additive manufacturing, and selective laser melting approaches". Journal of Manufacturing Processes 101 (2023): 67-85. http://dx.doi.org/10.1016/j.jmapro.2023.05.102.
    10.1016/j.jmapro.2023.05.102
  6. Samruddha Kokare; J.P. Oliveira; Radu Godina. "Life cycle assessment of additive manufacturing processes: A review". Journal of Manufacturing Systems (2023): https://doi.org/10.1016/j.jmsy.2023.05.007.
    10.1016/j.jmsy.2023.05.007
  7. Reis, Rafaela C.; Kokare, Samruddha; Oliveira, J.P.; Matias, João C.O.; Godina, Radu. "Life cycle assessment of metal products: A comparison between wire arc additive manufacturing and CNC milling". Advances in Industrial and Manufacturing Engineering (2023): 100117. http://dx.doi.org/10.1016/j.aime.2023.100117.
    Acesso aberto • Publicado • 10.1016/j.aime.2023.100117
  8. Kokare, Samruddha; Oliveira, João P.; Godina, Radu. "Modelling of Wire Arc Additive Manufactured Product Cost". Procedia Computer Science 217 (2023): 1513-1521. http://dx.doi.org/10.1016/j.procs.2022.12.351.
    10.1016/j.procs.2022.12.351
  9. Samruddha Kokare; J.P. Oliveira; T.G. Santos; Radu Godina. "Environmental and Economic Assessment of a steel wall fabricated by Wire-based Directed Energy Deposition". Additive Manufacturing (2022): 103316-103316. http://dx.doi.org/10.1016/j.addma.2022.103316.
    10.1016/j.addma.2022.103316
  10. Kokare, S.; Asif, F. M. A.; Mårtensson, G.; Shoaib-ul-Hasan, S.; Rashid, A.; Roci, M.; Salehi, N.. "A comparative life cycle assessment of stretchable and rigid electronics: a case study of cardiac monitoring devices". International Journal of Environmental Science and Technology 19 4 (2021): 3087-3102. http://dx.doi.org/10.1007/s13762-021-03388-x.
    Acesso aberto • Publicado • 10.1007/s13762-021-03388-x
Capítulo de livro
  1. Kokare, Samruddha; Oliveira, João Pedro; Godina, Radu. "Life cycle assessment and economics of additive manufacturing processes". In Additive Manufacturing Materials and Technology, 445-473. Amsterdam, Países Baixos: Elsevier, 2024.
    Publicado • 10.1016/b978-0-443-18462-8.00018-0
  2. Kokare, Samruddha; Godina, Radu; Oliveira, João Pedro. "Life Cycle Inventory of Additive Manufacturing Processes: A Review". In Springer Proceedings in Business and Economics, 77-86. Springer International Publishing, 2023.
    10.1007/978-3-031-12914-8_7
  3. Kokare, Samruddha; Matos, Florinda; Oliveira, J. P.; Godina, Radu. "Life Cycle Assessment of Wire Arc Additive Manufacturing Process". In Proceedings of the 8th International Conference on Mechanical, Automotive and Materials Engineering, 135-144. Singapura, Singapura: Springer Nature Singapore, 2023.
    Publicado • 10.1007/978-981-99-3672-4_11
  4. Kokare, Samruddha; Oliveira, J. P.; Godina, Radu. "Comparison of Wire Arc Additive Manufacturing and Subtractive Manufacturing Approaches from an Environmental and Economic Perspective". In Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems, 868-878. Cham, Suiça: Springer Nature Switzerland, 2023.
    Publicado • 10.1007/978-3-031-38165-2_100
  5. Kokare, Samruddha; Godina, Radu; Oliveira, João P.. "Digital Platform for Environmental and Economic Analysis of Wire Arc Additive Manufacturing". In Technological Innovation for Digitalization and Virtualization, 233-243. Springer International Publishing, 2022.
    10.1007/978-3-031-07520-9_22
Poster em conferência
  1. Baptista,João; Kokare, Samruddha; Godina, Radu; Aelenei, Daniel. "Sustainable material choice for retrofit of building facades - A comparative LCA of different solutions". 2022.
    10.13140/RG.2.2.27249.35680
Relatório
  1. Samruddha Kokare; Saman Amir. 2022. ReCiPSS D4.3- Circular Supply/Value Chains Training & Evaluation Report. https://zenodo.org/record/6806316.
    10.5281/ZENODO.6806316
Tese / Dissertação
  1. "Comparative Life Cycle Assessment of Cardiac Monitoring Devices: A Case Study". Mestrado, Kungliga Tekniska Hogskolan Industriell teknik och management, 2020. https://www.diva-portal.org/smash/record.jsf?pid=diva2%3A1503537&dswid=2076.
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2023/11/24 Life Cycle Assessment of a Jet Printing and Dispensing Machine 5th International Conference on Industry 4.0 and Smart Manufacturing
ISCTE-University Institute of Lisbon (Lisbon, Portugal)
2023/02/17 Life Cycle Assessment of Wire Arc Additive Manufacturing Products 12TH International Conference on Industrial Technology and Management
(Cambridge, Reino Unido)
2022/11/03 Modelling of Wire Arc Additive Manufactured Product Cost 4th International Conference on Industry 4.0 and Smart Manufacturing
Upper Austria University of Applied Sciences - Hagenberg Campus (Linz, Áustria)
2022/07/01 Digital Platform for Environmental and Economic Analysis of Wire Arc Additive Manufacturing 13th Advanced Doctoral Conference On Computing, Electrical And Industrial Systems
Department of Electrical and Computer Engineering, NOVA University Lisbon (Caparica, Portugal)
2022/06/14 Sustainable material choice for retrofit of building facades - A comparative LCA of different solutions European Façade Network Conference -Teaching Façades for a Sustainable Future
NOVA University Lisbon (Lisbon, Portugal)
2022/05/02 Life Cycle Inventory of Additive Manufacturing Processes: A Review 3rd International Conference on Quality Innovation and Sustainability
Department of Economics, Management, Industrial Engineering and Tourism (DEGEIT), University of Aveiro (Aveiro, Portugal)

Orientação

Título / Tema
Papel desempenhado 		Curso (Tipo)
Instituição / Organização
2022/02 - 2022/09 Life cycle assessment of products fabricated by wire arc additive manufacturing
Coorientador
 Industrial Engineering and Management (Mestrado)
Universidade Nova de Lisboa Departamento de Engenharia Mecânica e Industrial, Portugal
2021/01/01 - 2021/06/01 Measurement of the technical, socio-economic, and environmental performance of circular business models
Coorientador
 Production Engineering and Management (Mestrado)
Kungliga Tekniska Högskolan Institutionen för industriell produktion, Suécia

Mycronic AB, Suécia

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação) 		Instituição / Organização
2019/08/01 - 2019/08/30 Served as a student mentor and provided assistance to new exchange students by organizing different activities and social outings to comfort their initial days in Stockholm (2019/08/01 - 2019/08/30)
Outro (Membro da Comissão Organizadora)
 Kungliga Tekniska Högskolan, Suécia
2015/08/15 - 2015/08/15 Assisted in organizing a blood donation camp at the National Institute of Technology, Tiruchirappalli, India in association with the local branch of the Indian Red Cross Society on the occasion of 69th Indian Independence Day (2015/08/15 - 2015/08/15)
Outro (Membro da Comissão Organizadora)
 National Institute of Technology Tiruchirappalli, Índia

Participação em evento

Descrição da atividade
Tipo de evento 		Nome do evento
Instituição / Organização
2022/10/14 - 2022/10/17 Participated in a workshop based on additive manufacturing of metals, their modeling and simulation, Non-destructive testing and some Industrial case studies.
Oficina (workshop)
 Additive Manufacturing of Metals
Universidade Nova de Lisboa Departamento de Engenharia Mecânica e Industrial, Portugal
2022/09/30 - 2022/09/30 Represented the Department of Mechanical and Industrial Engineering, NOVA University Lisbon in the European Researchers' Night where engagement with citizens of all ages was carried out to raise awareness about metal additive manufacturing technologies and their impact on society. European Researchers' Night 2022
European Commission Marie Sklodowska-Curie Actions, Bélgica
2016/12/05 - 2016/12/10 Participated in a winter school based on micro and nano manufacturing processes at the Indian Institute of Technology, Madras
Oficina (workshop)
 Micro and Nano Manufacturing Processes
Indian Institute of Technology Madras Department of Mechanical Engineering, Índia
2016/07/25 - 2016/07/30 Participated in a summer school based on Lean Manufacturing and Six Sigma at the National Institute of Technology, Tiruchirappalli, India
Oficina (workshop)
 Fundamentals and Advancements of Lean Manufacturing and Six Sigma
National Institute of Technology Tiruchirappalli Department of Production Engineering, Índia

Arbitragem científica em conferência

Nome da conferência Local da conferência
2023/11/01 - 2023/11/30 International Conference on. Industry 4.0 and Smart Manufacturing ISCTE-University Institute of Lisbon

Consultoria / Parecer

Descrição da atividade Instituição / Organização
2021/01/01 - 2021/05/30 Worked on industrial consultancy projects in the areas of circular economy, sustainable manufacturing and plastics recycling. CirBES Circular Business and Engineering Systems AB, Suécia
2020/06/01 - 2020/12/31 Calculated the environmental impacts of a Jet Printer machine using the Life Cycle Assessment (LCA) methodology. Suggested measures to reduce the environmental footprint of the jet printer. Mycronic AB, Suécia
2019/09/01 - 2019/12/01 Explored different automated methods to deburr cutting tools. Tested different deburring methods with cutting tools and proposed the most productive method. Assisted in developing automated cleaning and drying methods for cutting tool Sandvik Coromant Sverige AB, Suécia
2017/05/01 - 2017/08/01 Assisted in developing a mathematical model for the curing process of polymeric composites. Validated the proposed model by simulating the curing process of an epoxy polymer matrix system using Finite Element Method. Technische Universität Clausthal, Alemanha

Entrevista / Programa (rádio / tv)

Programa Tema
2021/03/15 - 2021/03/15 The role of simulation in decision-making for circular manufacturing systems. Available at https://www.youtube.com/watch?v=xt3RcYaFIy4 Moderated a panel discussion on the significance of complex modelling and simulation methods needed to understand the aspects of a circular business model, product design, and supply chain, and capture their mutual interactions to make informed decisions

Revisão ad hoc de artigos em revista

Nome da revista (ISSN) Editora
2024/09/26 - Atual International Journal of Sustainable Engineering (1939-7046) Taylor and Francis
2024/04/25 - 2024/05/06 Frontiers in Sustainability (2673-4524) Frontiers
2023/12/28 - 2024/01/12 Additive Manufacturing (2214-7810) Elsevier
Distinções

Prémio

2023 Best Oral Presentation Award
12TH International Conference on Industrial Technology and Management, Reino Unido
2023 MIT Portugal Phd studenship
Massachusetts Institute of Technology MIT Portugal Program, Portugal
2018 Outstanding Student Award
National Institute of Technology Tiruchirappalli Department of Production Engineering, Índia
2018 Institute Gold Medal
National Institute of Technology Tiruchirappalli, Índia
2018 KTH India Masters Scholarship
Kungliga Tekniska Hogskolan Industriell teknik och management, Suécia
2017 Working Internship in Science and Engineering (WISE) Scholarship
Deutscher Akademischer Austauschdienst Dienst, Índia