???global.info.a_carregar???
Gustavo Filipe Lopes Correia Pinto Completed the Master's degree in Automation, Instrumentation and Control in 2008 by the Faculty of Engineering of University of Porto. He is a Senior Technician at the Polytechnic Institute of Porto since 2001. Responsible for the classes of support, maintenance and good functioning of the Laboratory of Automation and Mechanics. Maintenance of the page of the Department of Mechanical Engineering at the Polytechnic Institute of Porto. High Institute of Engineering of Porto, Assistant Professor of Higher Education, Department of Mechanical Engineering. Integrated member of the Center for Research and Development in Mechanical Engineering - CIDEM. Team's member responsible for implementing Safety and Health at Work. Has published more than 15 articles in magazines and reviewed more than 12. Received 1 award and honours. He was an author and co-author of scientific works. In its Science Vitae curriculum, the most frequent terms in the context of scientific, technological and artistic-cultural production are Urban traffic; Automatic monitoring; Neural networks; LEAN; Physical Vapor Deposition; Computational Fluid Dynamics Simulation.
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Gustavo Filipe Lopes Correia Pinto

Nomes de citação

  • Pinto, Gustavo Filipe

Identificadores de autor

Ciência ID
A01E-E566-B4D8
ORCID iD
0000-0003-0032-7356

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Inglês Utilizador independente (B2) Utilizador independente (B2) Utilizador independente (B2) Utilizador independente (B2)
Português Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Formação
Grau Classificação
2008
Concluído
 Mestrado em Automação, Instrumentação e Controlo (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
"Identificar e testar técnicas baseadas em Redes Neuronais e Lógica Difusa para o Controlo de Semáforos em Tráfego Urbano" (TESE/DISSERTAÇÃO)
 Bom
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento 		Empregador
2023/09 - Atual Assistente convidado (Docente Ensino Superior Politécnico) Instituto Superior de Administração e Gestão, Portugal
Instituto Superior de Administração e Gestão, Portugal

Outros

Categoria Profissional
Instituição de acolhimento 		Empregador
2017/11/01 - Atual Assistant Professor Higher Education Teacher, Department of Mechanical Engineering, in Professional Technical Courses. Disciplines: technical drawing and building design. Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2010 - Atual CIDEM - Centro de Investigação e Desenvolvimento em Engenharia Mecânica Instituto Politécnico do Porto Centro de Investigação e Desenvolvimento em Engenharia Mecânica, Portugal
2001/03/01 - Atual Senior Engineering Technician Responsible for support classes, maintenance and proper functioning of laboratory of Automation and Mechanics. Maintaining the webpage of the Department of Mechanical Eng Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015/11/01 - 2016/02/01 Assistant Professor - Higher Institute of Entre Douro and Vouga Technological Specialisation Courses ( CET ) on Industrial Production. Discipline: Parametric modeling (3D-SolidWorks). Instituto Superior de Entre Douro e Vouga, Portugal
2006/10/01 - 2015/07/01 Technical Professional School of Vale de Cambra Trainer and coach training in the workplace. Training in the area of Management of Product and Process and Industrial Organization. Foresp - Escola tecnológica de Vale de Cambra, Portugal
2013/10/01 - 2014/03/01 Assistant Professor - ESEIG / Higher school of industrial studies and management Higher Education Teacher, Department of Mechanical Engineering. Instituto Politécnico do Porto, Portugal
2010 - 2013 LAETA - Associated Laboratory for Energy, Transports and Aeronautics Associated Laboratory for Energy Transports and Aeronautics, Portugal
2010/10/01 - 2012/07/01 Assistant Professor - ESEIG / Higher school of industrial studies and management Higher Education Teacher, Department of Mechanical Engineering. Instituto Politécnico do Porto, Portugal
2008/10/01 - 2010/07/01 Infante D. Henrique Secondary School - Teacher Taught subjects of Automotive mechatronics: Introduction to the automobile industry; Materials, Technical Drawing; Equipment and tools, wheels, Tires and Escola Industrial Infante D. Henrique, Portugal
2009/10/01 - 2009/12/01 Technical Professional School - Business Association of Portugal - AEP Teacher in High School of disciplines: - Measurement and Mechanical Testing; - Technical Mechanics. Associação Empresarial de Portugal, Portugal
Produções

Publicações

Artigo em conferência
  1. Duarte, M.; Baptista, A.; Pinto, G.. "Exploring the use of quick response codes: Accessing videos in the laboratory". 2015.
    10.1145/2808580.2808596
Artigo em revista
  1. Andresa Baptista; Gustavo F. Pinto; Vitor F. C. Sousa; Francisco J. G. Silva; Filipe Fernandes. "Study on the Micro-Abrasion Wear Behavior of PVD Hard Coating under Different SiC Abrasive Particles/Distilled Water Ratios". Materials (2023): https://doi.org/10.3390/ma16082939.
    10.3390/ma16082939
  2. Gustavo Filipe Pinto; Andresa Baptista; Vitor F. C. Sousa; F. J. G. Silva; M. Evaristo; Filipe Fernandes. "Study on the Wear Modes of PVD Films Using Different Concentrations of Al2O3 Abrasive Particles and Textured Rotating Balls". Coatings 13 3 (2023): 628-628. http://dx.doi.org/10.3390/coatings13030628.
    10.3390/coatings13030628
  3. Vitor F. C. Sousa; Francisco J. G. Silva; Ricardo Alexandre; José S. Fecheira; Gustavo Pinto; Andresa Baptista. "Experimental study on the wear evolution of different PVD coated tools under milling operations of LDX2101 duplex stainless steel". Advances in Manufacturing (2023): https://doi.org/10.1007/s40436-022-00401-5.
    10.1007/s40436-022-00401-5
  4. Vitor F. C. Sousa; Francisco J. G. Silva; Ricardo Alexandre; Gustavo Pinto; Andresa Baptista; José S. Fecheira. "Investigations on the Wear Performance of Coated Tools in Machining UNS S32101 Duplex Stainless Steel". Metals (2022): https://doi.org/10.3390/met12060896.
    10.3390/met12060896
  5. Gustavo Filipe Pinto; Joaquim Monteiro; Andresa Baptista; Leonardo Ribeiro; José Leite. "Study of the Permeation Flowrate of an Innovative Way to Store Hydrogen in Vehicles". Energies (2021): https://www.mdpi.com/1996-1073/14/19/6299.
    10.3390/en14196299
  6. Vitor F. C. Sousa; F. J. G. Silva; H. Lopes; Rafaela C. B. Casais; Andresa Baptista; Gustavo Filipe Pinto; Ricardo Alexandre. "Wear Behavior and Machining Performance of TiAlSiN-Coated Tools Obtained by dc MS and HiPIMS: A Comparative Study". Materials (2021): https://www.mdpi.com/1996-1944/14/18/5122.
    10.3390/ma14185122
  7. Vitor F. C. Sousa; João Castanheira; Francisco J. G. Silva; José S. Fecheira; Gustavo Pinto; Andresa Baptista. "Wear Behavior of Uncoated and Coated Tools in Milling Operations of AMPCO (Cu-Be) Alloy". Applied Sciences (2021): https://doi.org/10.3390/app11167762.
    10.3390/app11167762
  8. Andresa Baptista; Gustavo Pinto; Francisco J. G. Silva; Andreia A. Ferreira; Arnaldo G. Pinto; Vitor F. C. Sousa. "Wear Characterization of Chromium PVD Coatings on Polymeric Substrate for Automotive Optical Components". Coatings 11 5 (2021): 555-555. https://doi.org/10.3390/coatings11050555.
    10.3390/coatings11050555
  9. Gustavo Pinto; Andresa Baptista; Francisco Silva; Jacobo Porteiro; José Míguez; Ricardo Alexandre. "Study on the Influence of the Ball Material on Abrasive Particles’ Dynamics in Ball-Cratering Thin Coatings Wear Tests". Materials 14 3 (2021): 668-668. https://doi.org/10.3390/ma14030668.
    10.3390/ma14030668
  10. Vitor F. C. Sousa; F. J. G. Silva; Gustavo Filipe Pinto; Andresa Baptista; Ricardo Alexandre. "Characteristics and Wear Mechanisms of TiAlN-Based Coatings for Machining Applications: A Comprehensive Review". Metals (2021): https://www.mdpi.com/2075-4701/11/2/260.
    10.3390/met11020260
  11. A. Baptista; F.J.G. Silva; G. Pinto; J. Porteiro; J. Míguez; R. Alexandre; V.F.C. Sousa. "Influence of the ball surface texture in the dragging of abrasive particles on micro-abrasion wear tests". Wear (2021): 203730-203730. https://doi.org/10.1016%2Fj.wear.2021.203730.
    10.1016/j.wear.2021.203730
  12. Pinto, Gustavo; Silva, F.J.G.; Baptista, A.; Campilho, Raul; Viana, F.. "Investigations on the oxidation of Zn-coated steel cables". FME Transactions 49 3 (2021): 587-597. http://dx.doi.org/10.5937/fme2103587p.
    10.5937/fme2103587p
  13. Pinto, Gustavo. "Implementing a maintenance strategic plan using TPM methodology". International Journal of Industrial Engineering and Management (2020): http://dx.doi.org/10.24867/ijiem-2020-3-264.
    10.24867/ijiem-2020-3-264
  14. Pinto, Gustavo. "TPM implementation and maintenance strategic plan – a case study". Procedia Manufacturing 51 (2020): 1423-1430. http://dx.doi.org/10.1016/j.promfg.2020.10.198.
    10.1016/j.promfg.2020.10.198
  15. Pinto, Gustavo. "Production Process Analysis and Improvement of Corrugated Cardboard Industry". Procedia Manufacturing 51 (2020): 1395-1402. http://dx.doi.org/10.1016/j.promfg.2020.10.194.
    10.1016/j.promfg.2020.10.194
  16. Pinto, Gustavo. "Applying DMADV on the industrialization of updated components in the automotive sector: a case study". Procedia Manufacturing 51 (2020): 1332-1339. http://dx.doi.org/10.1016/j.promfg.2020.10.186.
    10.1016/j.promfg.2020.10.186
  17. Pinto, Gustavo. "Studying the ZnO formation in coated steel wire ropes for the automotive industry". Procedia Manufacturing 51 (2020): 912-919. http://dx.doi.org/10.1016/j.promfg.2020.10.128.
    10.1016/j.promfg.2020.10.128
  18. Joaquim Monteiro; Andresa Baptista; Gustavo Pinto; Leonardo Ribeiro; Hélder Mariano. "Assessment of the Use of Solar Desalination Distillers to Produce Fresh Water in Arid Areas". Sustainability 12 1 (2019): 53-53. https://doi.org/10.3390/su12010053.
    10.3390/su12010053
  19. Andresa Baptista; Carlos Pinho; Gustavo Pinto; Leonardo Ribeiro; Joaquim Monteiro; Tiago Santos. "Assessment of an Innovative Way to Store Hydrogen in Vehicles". Energies (2019): https://doi.org/10.3390/en12091762.
    10.3390/en12091762
  20. Pinto, Gustavo. "Intralogistics and industry 4.0: designing a novel shuttle with picking system". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.078.
    10.1016/j.promfg.2020.01.078
  21. Pinto, Gustavo. "Improving the Cut Surface Quality by Optimizing Parameters in the Fibre Laser Cutting Process". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.199.
    10.1016/j.promfg.2020.01.199
  22. Pinto, Gustavo. "A novel concept of a conduit transport system". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.166.
    10.1016/j.promfg.2020.01.166
  23. Pinto, Gustavo. "Continuous improvement in maintenance: a case study in the automotive industry involving Lean tools". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.127.
    10.1016/j.promfg.2020.01.127
  24. Pinto, Gustavo. "Influence of the natural additive on natural fiber reinforced thermoplastic composite". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.200.
    10.1016/j.promfg.2020.01.200
  25. Andresa Baptista; Francisco Silva; Jacobo Porteiro; José Míguez; Gustavo Pinto. "Sputtering Physical Vapour Deposition (PVD) Coatings: A Critical Review on Process Improvement and Market Trend Demands". Coatings 8 11 (2018): 402-402. https://doi.org/10.3390/coatings8110402.
    10.3390/coatings8110402
  26. Gustavo Filipe Pinto; F. J. G. Silva; Jacobo Porteiro; José Míguez; Andresa Baptista. "Numerical Simulation Applied to PVD Reactors: An Overview". Coatings (2018): http://www.mdpi.com/2079-6412/8/11/410.
    10.3390/coatings8110410
  27. Pinto, Gustavo. "How to Become a Manufacturing Cell Fully-Automated Without Robots: Case-Study in the Automotive Components Industry". Advances in Robotics & Mechanical Engineering (2018): http://dx.doi.org/10.32474/arme.2018.01.000102.
    10.32474/arme.2018.01.000102
  28. Silva, F.J.G.; Baptista, A.; Pinto, G.; Campilho, R.D.S.G.; Ribeiro, M.C.S.. "Characterization of hybrid pultruded structural products based on preforms". Composites Part B: Engineering 140 (2018): 16-26. http://www.scopus.com/inward/record.url?eid=2-s2.0-85038216179&partnerID=MN8TOARS.
    10.1016/j.compositesb.2017.12.019
  29. G. Pinto; F.J.G. Silva; J. Porteiro; J.L. Míguez; A. Baptista; L. Fernandes. "A critical review on the numerical simulation related to Physical Vapour Deposition". Procedia Manufacturing 17 (2018): 860-869. https://doi.org/10.1016%2Fj.promfg.2018.10.138.
    10.1016/j.promfg.2018.10.138
  30. F.J.G. Silva; R.D.S.G. Campilho; R.M. Gouveia; G. Pinto; A. Baptista. "A Novel Approach to Optimize the Design of Parts for Additive Manufacturing". Procedia Manufacturing 17 (2018): 53-61. https://doi.org/10.1016%2Fj.promfg.2018.10.012.
    10.1016/j.promfg.2018.10.012
  31. L. Fernandes; F.J.G. Silva; O.C. Paiva; A. Baptista; G. Pinto. "Minimizing the Adhesion Effects in Food Packages Forming by the Use of Advanced Coatings". Procedia Manufacturing 17 (2018): 886-894. https://doi.org/10.1016%2Fj.promfg.2018.10.141.
    10.1016/j.promfg.2018.10.141
  32. A. Baptista; F.J.G. Silva; J. Porteiro; J.L. Míguez; G. Pinto; L. Fernandes. "On the Physical Vapour Deposition (PVD): Evolution of Magnetron Sputtering Processes for Industrial Applications". Procedia Manufacturing 17 (2018): 746-757. https://doi.org/10.1016%2Fj.promfg.2018.10.125.
    10.1016/j.promfg.2018.10.125
  33. Silva, F.J.G.; Amorim, E.; Baptista, A.; Pinto, G.; Campilho, R.D.S.G.; Castro, M.R.A.. "Producing hybrid pultruded structural products based on preforms". Composites Part B: Engineering 116 (2017): 325-332. http://www.scopus.com/inward/record.url?eid=2-s2.0-85006173747&partnerID=MN8TOARS.
    10.1016/j.compositesb.2016.10.070
  34. Marina Duarte; Andresa Baptista; Gustavo Pinto. "Using Quick Response Codes with Videos in the Laboratory". Journal of Cases on Information Technology 18 4 (2016): 70-80. https://doi.org/10.4018%2Fjcit.2016100105.
    10.4018/jcit.2016100105
  35. Duarte, M.; Baptista, A.; Pinto, G.. "Using quick response codes with videos in the laboratory". Journal of Cases on Information Technology 18 4 (2016): 70-80. http://www.scopus.com/inward/record.url?eid=2-s2.0-85008889349&partnerID=MN8TOARS.
    10.4018/JCIT.2016100105
Capítulo de livro
  1. Andresa Baptista; Gustavo F. Pinto; Vitor F. C. Sousa; Raul D. S. G. Campilho; Filipe Fernandes. "Studying the Machining Performance of DSS Steel Using Single and Multilayered TiAlSiN Coated Tools Deposited by HiPIMS". 2024.
    10.1007/978-3-031-38241-3_89
  2. Leonardo Ribeiro; Gustavo F. Pinto; Andresa Baptista; Joaquim Monteiro. "Study on a New Hydrogen Storage System – Performance, Permeation, and Filling/Refilling". 11-46. Wiley, 2023.
    10.1002/9781394167555.ch2
  3. Pinto, Gustavo. "LEAN and Ergonomics: How to increase the productivity improving the wellbeing of the workers – A case study". Estados Unidos, 2019.
  4. Pinto, Gustavo. "LEAN Manutacturing applied to a complex electronic assembly line". Estados Unidos, 2019.
Tese / Dissertação
  1. Pinto, Gustavo Filipe Lopes Correia. "Identificar e testar técnicas baseadas em redes neuronais e lógica difusa para o controlo de semáforos em tráfego urbano". Mestrado, 2008. http://hdl.handle.net/10216/59596.
Distinções

Prémio

2020 Coatings 2019 - Best Paper Awards - MDPI
Multidisciplinary Digital Publishing Institute AG, Suiça
2014 Excellence at Work in 2013/2014
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Outra distinção

2018 Merit Certificate - Scientific Publication
Instituto Politécnico do Porto, Portugal