???global.info.a_carregar???
Miguel Calvário. Concluiu o Mestrado em Engenharia Mecânica - Especialização em Concepção e Produção em 2010 pela Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia e Licenciatura em Engenharia Mecânica - Produção em 2008 pelo Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal. É investigador no Centro de Engenharia e Tecnologia Naval e Oceânica (CENTEC) desde 2013 e aluno de doutoramento no curso de Engenharia Naval e Oceânica desde 2019. Publicou 12 artigos em revistas especializadas. Possui 15 capítulos de livros e participou em 2 artigos de conferência. Recebeu 1 prémio. Atualmente, é Bolseiro de Doutoramento e participou como Bolseiro de Investigação em 3 projetos. Nas suas atividades profissionais interagiu com 14 colaboradores em coautorias de trabalhos científicos. No seu currículo Ciência Vitae os termos mais frequentes na contextualização da produção científica, tecnológica e artístico-cultural são: conversores de energia de ondas, sistemas óleo hidráulicos, elementos finitos, otimização, materiais compósitos . De 15-04-2024 a 05-07-2024, lecionou a disciplina de Navios em Materiais Compósitos no Instituto Superior Técnico.
Read full resume ↓
Identification

Personal identification

Full name
Miguel Pita Soares da Fonseca Calvário

Citation names

  • Calvário, Miguel

Author identifiers

Ciência ID
881E-DF9B-09F5
ORCID iD
0000-0002-8912-3319

Knowledge fields

  • Engineering and Technology - Mechanical Engineering - Mechanical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
English Advanced (C1) Proficiency (C2) Advanced (C1) Proficiency (C2)
Education
Degree Classification
2010
Concluded
 Mestrado em Engenharia Mecânica - Especialização em Concepção e Produção (Mestrado)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
"Modelling a Cable Structure for a New Wind Energy Production Device" (THESIS/DISSERTATION)
 15
2008
Concluded
 Licenciatura em Engenharia Mecânica – Produção (Licenciatura)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
"n/a" (THESIS/DISSERTATION)
 14
Affiliation

Science

Category
Host institution 		Employer
2013/06/01 - Current Researcher (Research) Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal

Others

Category
Host institution 		Employer
2012/03/19 - 2013/03/18 Mechanical Engineer; Process engineer in the Machining department and collaboration in the Quality department. Activities - Management of Control plans, FMEA and collaboration with suppliers. VISTEON PORTUGUESA LTA., Portugal
2011/06/01 - 2011/12/15 Mechanical Engineer; Collaborator in the implementation of a maintenance plan for electromechanical equipment in a school in the municipality of Setúbal Câmara Municipal de Setúbal, Portugal
Projects

Grant

Designation Funders
2023/05/01 - Current Bolsa de investigação para estudante de Doutoramento
CENTEC - UIDP/00134/2020
Research Fellow
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
 Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento
2019/03 - 2023/04/30 Strength of components in composite materials for wave energy converters
SFRH/BD/137429/2018
PhD Student Fellow
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing

Contract

Designation Funders
2016/10/01 - 2019/02/28 Generic Hydraulic Power Take-Off System for Wave Energy Converters
PTDC/EMS-SIS-1145/2014
Research Fellow
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal

Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
2014/01/01 - 2015/06/30 Marine Renewable - Energy Extraction and Hydro-environmental Aspects (MAREN II)
2013-1/225
Research Fellow
European Regional Development Fund, Belgium
2010/04 - 2013/09 Hydrodynamic analysis of wave energy converters with different motion characteristics (WAVE CONVERTERS)
PTDC/EME-MFE/105006/2008
 Portuguese Foundation for Science and Technology
Outputs

Publications

Book chapter
  1. Calvário, M.; Wang, S.; Soares, C. Guedes. "Effect of lay-up sequence on the hydroelastic response of three-dimensional axisymmetric buoys under slamming loads". In Innovations in Renewable Energies Offshore, 971-978. United Kingdom: CRC Press, 2025.
    Published • 10.1201/9781003558859-104
  2. Calvário, M.; Wang, S.; Guedes Soares, C.. "Influence of the laminate stiffness on the slamming response of composite wedges". In Advances in Maritime Technology and Engineering, 359-366. CRC Press, 2024.
    10.1201/9781003508762-44
  3. Calvário, M.; Wang, S.; Guedes Soares, C.. "Analysis of slamming loads on a sandwich composite wedge". In Trends in Renewable Energies Offshore, 889-896. CRC Press, 2022.
    Published • 10.1201/9781003360773-98
  4. Calvário, Miguel; Soares, C. Guedes. "Study of a composite pressure hull for point absorber wave energy converter". In Developments in Maritime Technology and Engineering. United Kingdom: Taylor & Francis Group, 2021.
    Published
  5. Kamarlouei, Mojtaba; Gaspar, José F.; Hallak, T. S.; Calvário, Miguel; Thiebaut, F.; Soares, C. Guedes. "Experimental analysis of wind thrust effects on the performance of a wave energy converter array adapted to a floating offshore platform". In Developments in Maritime Technology and Engineering. United Kingdom: Taylor & Francis Group, 2021.
    Published
  6. Gaspar, José F.; Kamarlouei, Mojtaba; Calvário, Miguel; Soares, C. Guedes. "Design of power take offs for combined wave and wind harvesting floating platforms". In Developments in Renewable Energies Offshore, 785-793. United Kingdom: Taylor & Francis Group, 2021.
    Published • https://doi.org/10.1201/9781003134572
  7. Kamarlouei, Mojtaba; Gaspar, José F.; Calvário, Miguel; Hallak, T. S.; Soares, C. Guedes. "Prototyping and wave tank testing of a floating platform with point absorbers". In Advances in Renewable Energies Offshore. United Kingdom: Taylor & Francis Group, 2019.
    Published
  8. Calvário, Miguel; Sutherland, Leigh. "A review of the applications composite materials in wave and tidal energy devices". In Maritime Transportation and Harvesting of Sea Resources, 695-701. United Kingdom: Taylor & Francis Group, 2018.
    Published
  9. Calvário, Miguel; Teixeira, A P; Soares, C. Guedes. "Uncertainty propagation and sensitivity analysis of a laminated composite beam". In Progress in Maritime Technology and Engineering, edited by Guedes Soares, 395-402. United Kingdom: Taylor & Francis Group, 2018.
    Published • https://doi.org/10.1201/9780429505294
  10. Calvário, Miguel; Gaspar, José F.; Sinha, Ashank; Soares, C. Guedes. "Optimization of an oil-hydraulic Power Take-Off system based on an adaptable mechanism interface". In Progress in Renewable Energies Offshore, 435-443. United Kingdom: Taylor & Francis Group, 2016.
    Published
  11. Gaspar, José F.; Sinha, Ashank; Calvário, Miguel; Soares, C. Guedes. "Power Take-Off concept with flow proportional valves based rectification". In Maritime Technology and Engineering 3, 1111-1118. United Kingdom: Taylor & Francis Group, 2016.
    Published
  12. Sinha, Ashank; Karmakar, D; Gaspar, José F.; Calvário, Miguel; Soares, C. Guedes. "Time domain analysis of circular array of heaving point absorbers". In Maritime Technology and Engineering 3, 1133-1140. United Kingdom: Taylor & Francis Group, 2016.
    Published
  13. Gaspar, José F.; Sinha, Ashank; Calvário, Miguel; Soares, C. Guedes. "Concept of reciprocating oil-hydraulic cylinders for increased wave power harvesting". In Progress in Renewable Energies Offshore. United Kingdom: Taylor & Francis Group, 2016.
    Published
  14. Gaspar, José F.; Calvário, Miguel; Soares, C. Guedes. "Pump and gas accumulator based phase control of wave energy converters". In Renewable Energies Offshore, 295-303. United Kingdom: Taylor & Francis Group, 2015.
    Published • https://doi.org/10.1201/b18973
  15. Calvário, Miguel; Gaspar, José F.; Soares, C. Guedes. "Comparative study of lever mechanisms connected to oil-hydraulic power take-off systems". In Renewable Energies Offshore, 271-278. United Kingdom: Taylor & Francis Group, 2015.
    Published • https://doi.org/10.1201/b18973
Conference paper
  1. Kamarlouei, Mojtaba; Hallak, Thiago S.; Gaspar, Jose F.; Calvário, Miguel; Guedes Soares, C.. "Optimization of a Torus-Shaped Wave Energy Converter Attached to a Hinged Arm". Paper presented in ASME 2021 40th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2021), 2021.
    10.1115/omae2021-63729
  2. Hallak, Thiago S.; Gaspar, José F.; Kamarlouei, Mojtaba; Calvário, Miguel; Mendes, Mário J. G. C.; Thiebaut, Florent; Soares, C. Guedes. "Numerical and experimental analysis of a hybrid wind-wave offshore floating platform's hull". Paper presented in 37th International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2018), Madrid, 2018.
    https://doi.org/10.1115/OMAE2018-78744
Journal article
  1. Calvário, M.; Xu, H.T.; Wang, S.; Gaspar, J.F.; Guedes Soares, C.. "Impact of a tri-dimensional conical structure made of composite materials". Ocean Engineering 315 (2025): 119817. https://doi.org/10.1016/j.oceaneng.2024.119817.
    Published • 10.1016/j.oceaneng.2024.119817
  2. Calvário, M.; Wang, S.; Guedes Soares, C.. "Hydroelastic study on the water impact of point absorbers made of composite materials". Ocean Engineering 296 (2024): 116979. http://dx.doi.org/10.1016/j.oceaneng.2024.116979.
    Published • 10.1016/j.oceaneng.2024.116979
  3. Kamarlouei, Mojtaba; Hallak, Thiago S.; Gaspar, José F.; Calvário, Miguel; Soares, C. Guedes. "Torus-Shaped Wave Energy Converter Attached to a Hinged Arm". Journal of Offshore Mechanics and Arctic Engineering 146 1 (2023): http://dx.doi.org/10.1115/1.4062624.
    10.1115/1.4062624
  4. Kamarlouei, M.; Gaspar, J.F.; Calvário, M.; Hallak, T.S.; Mendes, M.J.G.C.; Thiebaut, F.; Guedes Soares, C.. "Experimental study of wave energy converter arrays adapted to a semi-submersible wind platform". Renewable Energy 188 (2022): 145-163. http://dx.doi.org/10.1016/j.renene.2022.02.014.
    Published • 10.1016/j.renene.2022.02.014
  5. Calvário, M.; Li, Zhun; Guedes Soares, C.. "Buckling strength of a composite material wave energy converter structure under slamming loads". Ocean Engineering 241 (2021): 110044. http://dx.doi.org/10.1016/j.oceaneng.2021.110044.
    Published • 10.1016/j.oceaneng.2021.110044
  6. Gaspar, José F.; Stansby, Peter K; Calvário, Miguel; Guedes Soares, C.. "Hydraulic Power Take-Off concept for the M4 Wave Energy Converter". Applied Ocean Research 106 (2020): 102462. http://dx.doi.org/10.1016/j.apor.2020.102462.
    Published • 10.1016/j.apor.2020.102462
  7. Calvário, M.; Gaspar, J.F.; Kamarlouei, M.; Hallak, T.S.; Guedes Soares, C.. "Oil-hydraulic power take-off concept for an oscillating wave surge converter". Renewable Energy 159 (2020): 1297-1309. http://dx.doi.org/10.1016/j.renene.2020.06.002.
    Published • 10.1016/j.renene.2020.06.002
  8. Kamarlouei, M.; Gaspar, J.F.; Calvario, M.; Hallak, T.S.; Mendes, M.J.G.C.; Thiebaut, F.; Guedes Soares, C.. "Experimental analysis of wave energy converters concentrically attached on a floating offshore platform". Renewable Energy 152 (2020): 1171-1185. http://dx.doi.org/10.1016/j.renene.2020.01.078.
    Published • 10.1016/j.renene.2020.01.078
  9. Gaspar, José F.; Calvário, Miguel; Kamarlouei, Mojtaba; Soares, C. Guedes. "Design tradeoffs of an oil-hydraulic power take-off for wave energy converters". Renewable Energy 129 (2018): 245-259. http://dx.doi.org/10.1016/j.renene.2018.05.092.
    Published • 10.1016/j.renene.2018.05.092
  10. Gaspar, José F.; Kamarlouei, Mojtaba; Sinha, Ashank; Xu, Haitong; Calvário, Miguel; Faÿ, François-Xavier; Robles, Eider; Guedes Soares, C.. "Analysis of electrical drive speed control limitations of a power take-off system for wave energy converters". Renewable Energy 113 (2017): 335-346. http://dx.doi.org/10.1016/j.renene.2017.05.085.
    Published • 10.1016/j.renene.2017.05.085
  11. Gaspar, José F.; Kamarlouei, Mojtaba; Sinha, Ashank; Xu, Haitong; Calvário, Miguel; Faÿ, François-Xavier; Robles, Eider; Soares, C. Guedes. "Speed control of oil-hydraulic power take-off system for oscillating body type wave energy converters". Renewable Energy 97 (2016): 769-783. http://dx.doi.org/10.1016/j.renene.2016.06.015.
    10.1016/j.renene.2016.06.015
  12. Gaspar, José F.; Calvário, Miguel; Kamarlouei, Mojtaba; Guedes Soares, C.. "Power take-off concept for wave energy converters based on oil-hydraulic transformer units". Renewable Energy 86 (2015): 1232-1246. http://dx.doi.org/10.1016/j.renene.2015.09.035.
    Published • 10.1016/j.renene.2015.09.035
Thesis / Dissertation
  1. "Modelling a Cable Structure for a New Wind Energy Production Device". Master, Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, 2010.
Activities

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2024/04/15 - 2024/07/05 Navios em Materiais Compósitos Engenharia Naval e Oceânica (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
Distinctions

Award

2007 Bolsa de Estudo por Mérito
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal