???global.info.a_carregar???
Identification

Personal identification

Full name
Carlos Pinho

Citation names

  • Pinho, Carlos

Author identifiers

Ciência ID
AD13-C7AD-61FA
ORCID iD
0000-0002-0290-8018
Outputs

Publications

Conference paper
  1. Carlos Pinho. "A SIMPLE ANALYSIS OF THE EXERGETIC PERFORMANCE OF THE HOT WATER STORAGE AND THE TANKLESS PRODUCTION SYSTEMS". 2015.
    10.20906/cps/cob-2015-0113
Journal article
  1. Ana Almeida; Rosa Pilão; Albina Ribeiro; Elisa Ramalho; Carlos Pinho. "Co-Gasification of Crude Glycerol/Animal Fat Mixtures". Energies 13 7 (2020): 1699-1699. https://doi.org/10.3390/en13071699.
    10.3390/en13071699
  2. Pinho, Carlos. "Comparative Analysis of Fluidized and Fixed Bed to Obtain Data on the Char Pellet´s Combustion Regime". International Journal of Energy for a Clean Environment (2020): http://dx.doi.org/10.1615/interjenercleanenv.2020034698.
    10.1615/interjenercleanenv.2020034698
  3. Hugo Ferreira; Carlos Manuel Rodrigues; Carlos Pinho. "Impact of Road Geometry on Vehicle Energy Consumption and CO2 Emissions: An Energy-Efficiency Rating Methodology". Energies 13 1 (2019): 119-119. https://doi.org/10.3390/en13010119.
    10.3390/en13010119
  4. Ana Almeida; Rosa Pilão; Albina Ribeiro; Elisa Ramalho; Carlos Pinho. "Gasification of Crude Glycerol after Salt Removal". Energy & Fuels (2019): https://doi.org/10.1021/acs.energyfuels.9b02390.
    10.1021/acs.energyfuels.9b02390
  5. Edmundo Marques; Tânia Ferreira; Carlos Pereira; João Monney Paiva; Carlos Pinho. "Analysis of kinetic and diffusive data from the combustion of char pellets made with hybrid mixtures". Energy 181 (2019): 1179-1188. https://doi.org/10.1016/j.energy.2019.05.188.
    10.1016/j.energy.2019.05.188
  6. Andresa Baptista; Carlos Pinho; Gustavo Pinto; Leonardo Ribeiro; Joaquim Monteiro; Tiago Santos. "Assessment of an Innovative Way to Store Hydrogen in Vehicles". Energies 12 9 (2019): 1762-1762. https://doi.org/10.3390/en12091762.
    10.3390/en12091762
  7. Luís Esteves; Ana Magalhães; Victor Ferreira; Carlos Pinho. "Test of Two Phase Change Materials for Thermal Energy Storage: Determination of the Global Heat Transfer Coefficient". ChemEngineering 2 1 (2018): 10-10. https://doi.org/10.3390/chemengineering2010010.
    10.3390/chemengineering2010010
  8. Pinho, Carlos. "Energy and Exergy Analysis of a Pre-distillation Unit. A Case Study.". International Journal of Thermodynamics (2017):
    10.5541/ijot.5000209345
  9. Tânia Ferreira; Carlos Pereira; João M. Paiva; Carlos Pinho. "Simple Methodology To Quantify the Fragmentation on Batches of Char Pellets During Fluidized Bed Combustion". Energy & Fuels 31 5 (2017): 5073-5078. https://doi.org/10.1021/acs.energyfuels.6b03254.
    10.1021/acs.energyfuels.6b03254
  10. Carlos Pinho. "Sizing of a Domestic Hot Water Heating and Storage System for Short Operating Cycles - A Theoretical Approach". International Review of Mechanical Engineering (IREME) 9 4 (2015): 400-400. https://doi.org/10.15866%2Fireme.v9i4.6671.
    10.15866/ireme.v9i4.6671
  11. Carlos C. Pereira; Carlos Pinho. "Analysis of the fluidized bed combustion behavior of Quercus ilex char". Applied Thermal Engineering (2015): http://dx.doi.org/10.1016/j.applthermaleng.2015.02.055.
    10.1016/j.applthermaleng.2015.02.055
  12. Pinho, Carlos. "Influence of particle fragmentation and non-sphericity on the determination of diffusive and kinetic fluidized bed biochar combustion data". Fuel (2014): http://dx.doi.org/10.1016/j.fuel.2014.04.072.
    10.1016/j.fuel.2014.04.072
  13. Pedro Azevedo; Isabel Cabrita; Carlos Pinho. "REDUCED MECHANISM FOR COMBUSTION OF HYDROGEN AND METHANE WITH NITROGEN CHEMISTRY". Comput Thermal Scien 6 6 (2014): 541-551. http://dx.doi.org/10.1615/computthermalscien.2014010444.
    10.1615/computthermalscien.2014010444
  14. Pinho, Carlos. "Theoretical Considerations about the Steady State Combustion of Wood Char in a Bubbling Fluidized Bed Reactor". Energy and Power Engineering 05 03 (2013): 212-224. http://dx.doi.org/10.4236/epe.2013.53021.
    10.4236/epe.2013.53021
  15. Pereira, Carlos C.; Pinho, Carlos. "Determination of Fluidized Bed Combustion Kinetic and Diffusive Data of Four Wood Chars from the Central Region of Portugal". Energy & Fuels (2013): 131114124758001-131114124758001. http://dx.doi.org/10.1021/ef4017834.
    10.1021/ef4017834
  16. Pinho, C.. "The positive displacement method for calibration of gas flow meters. the influence of gas compressibility". Applied Thermal Engineering 41 (2012): 111-115. http://www.scopus.com/inward/record.url?eid=2-s2.0-84860489388&partnerID=MN8TOARS.
    10.1016/j.applthermaleng.2011.12.012
  17. Ramos, M.; Rangel, N.; Pinho, C.. "Fluidized-bed combustion of selected wood chars from the semi-arid northeastern region of brazil". Energy and Fuels 26 1 (2012): 400-406. http://www.scopus.com/inward/record.url?eid=2-s2.0-84855939586&partnerID=MN8TOARS.
    10.1021/ef201354f
  18. Neto, P.; Ribeiro, A.M.; Pinho, C.. "Study on heat transfer from a bubbling fluidized bed combustor to a membrane wall". International Journal of Chemical Reactor Engineering 10 1 (2012): http://www.scopus.com/inward/record.url?eid=2-s2.0-84872110735&partnerID=MN8TOARS.
    10.1515/1542-6580.2997
  19. Rangel, N.; Pinho, C.. "Kinetic and diffusive data from batch combustion of wood chars in fluidized bed". Biomass and Bioenergy 35 10 (2011): 4124-4133. http://www.scopus.com/inward/record.url?eid=2-s2.0-80053586892&partnerID=MN8TOARS.
    10.1016/j.biombioe.2011.06.020
  20. Rangel, N.; Pinho, C.. "Fragmentation effect on batches of pine wood char burning in a fluidized bed". Energy and Fuels 24 1 (2010): 318-323. http://www.scopus.com/inward/record.url?eid=2-s2.0-77149156630&partnerID=MN8TOARS.
    10.1021/ef900806z
  21. Falcão, D.S.; Pires, J.C.M.; Pinho, C.; Pinto, A.M.F.R.; Martins, F.G.. "Artificial neural network model applied to a PEM fuel cell". IJCCI 2009 - International Joint Conference on Computational Intelligence, Proceedings (2009): 435-439. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955443319&partnerID=MN8TOARS.
  22. Rangel, N.; Pinho, C.. "Considerations on experimental studies of vegetable char combustion in fluidized bed". International Journal of Energy for a Clean Environment 10 1-4 (2009): 203-215. http://www.scopus.com/inward/record.url?eid=2-s2.0-84860823875&partnerID=MN8TOARS.
    10.1615/InterJEnerCleanEnv.2011002039
  23. Ribeiro, L.; Pinho, C.. "A simple approach to numerical modeling of propane combustion in fluidized beds". Chemical Engineering Communications 196 3 (2009): 305-329. http://www.scopus.com/inward/record.url?eid=2-s2.0-55849091015&partnerID=MN8TOARS.
    10.1080/00986440802359337
  24. Neto, P.; Ribeiro, A.M.; Pinho, C.. "Splash and disengagement zone heat transfer in a propane-burning fluidized bed". Experimental Heat Transfer 22 2 (2009): 73-86. http://www.scopus.com/inward/record.url?eid=2-s2.0-70449557034&partnerID=MN8TOARS.
    10.1080/08916150902718559
  25. Paiva, J.M.; Pinho, C.; Figueiredo, R.. "Influence of the distributor plate and operating conditions on the fluidization quality of a gas fluidized bed". Chemical Engineering Communications 196 3 (2009): 342-361. http://www.scopus.com/inward/record.url?eid=2-s2.0-55849124733&partnerID=MN8TOARS.
    10.1080/00986440802359451
  26. Pinho, C.E.L.; Delgado, J.M.P.Q.; Pilão, R.; Conde, J.; Pinho, C.. "Numerical Study of Propane-Air Mixture Combustion in a Burner Element". Defect and Diffusion Forum 273-276 (2008): 144-149. http://dx.doi.org/10.4028/www.scientific.net/DDF.273-276.144.
    10.4028/www.scientific.net/ddf.273-276.144
  27. Magalhães, A.; Pinho, C.. "Spouted bed drying of cork stoppers". Chemical Engineering and Processing: Process Intensification 47 12 (2008): 2395-2401. http://www.scopus.com/inward/record.url?eid=2-s2.0-53549119687&partnerID=MN8TOARS.
    10.1016/j.cep.2007.11.009
  28. Pinho, C.E.L.; Delgado, J.M.P.Q.; Ferreira, V.; Pilão, R.; Pinho, C.. "Influence of Burner Geometry on Flame Characteristics of Propane-Air Mixture: Experimental and Numerical Studies". Defect and Diffusion Forum 273-276 (2008): 162-167. http://dx.doi.org/10.4028/www.scientific.net/DDF.273-276.162.
    10.4028/www.scientific.net/ddf.273-276.162
  29. Olhero, S.M.H.; Delgado, J.M.P.Q.; Ferreira, J.M.F.; Pinho, C.. "Development of porous ceramics for gas burners". Defect and Diffusion Forum 273-276 (2008): 814-819. http://www.scopus.com/inward/record.url?eid=2-s2.0-41049095867&partnerID=MN8TOARS.
  30. Ribeiro, L.; Pinho, C.. "Combustion of slugs of propane and air moving up through an incipiently fluidized bed". Combustion Theory and Modelling 11 3 (2007): 401-425. http://www.scopus.com/inward/record.url?eid=2-s2.0-34247588212&partnerID=MN8TOARS.
    10.1080/13647830600984118
  31. Coelho, Paulo M.; Pinho, Carlos. "Considerations about equations for steady state flow in natural gas pipelines". Journal of the Brazilian Society of Mechanical Sciences and Engineering 29 3 (2007): 262-273. http://dx.doi.org/10.1590/S1678-58782007000300005.
    10.1590/s1678-58782007000300005
  32. Pilão, R.; Ramalho, E.; Pinho, C.. "Overall characterization of cork dust explosion". Journal of Hazardous Materials 133 1-3 (2006): 183-195. http://www.scopus.com/inward/record.url?eid=2-s2.0-33748078136&partnerID=MN8TOARS.
    10.1016/j.jhazmat.2005.10.015
  33. Pinho, C.. "Fragmentation on batches of coke or char particles during fluidized bed combustion". Chemical Engineering Journal 115 3 (2006): 147-155. http://www.scopus.com/inward/record.url?eid=2-s2.0-28844497895&partnerID=MN8TOARS.
    10.1016/j.cej.2005.10.001
  34. Semenova, O.; Pilão, R.; Pinho, C.. "Explosion parameters for air and pine bark dust mixtures". Proceedings of the European Safety and Reliability Conference 2006, ESREL 2006 - Safety and Reliability for Managing Risk 3 (2006): 2033-2039. http://www.scopus.com/inward/record.url?eid=2-s2.0-56249107230&partnerID=MN8TOARS.
  35. Pilão, R.; Ramalho, E.; Pinho, C.. "Explosibility of cork dust in methane/air mixtures". Journal of Loss Prevention in the Process Industries 19 1 (2006): 17-23. http://www.scopus.com/inward/record.url?eid=2-s2.0-26844559026&partnerID=MN8TOARS.
    10.1016/j.jlp.2005.05.001
  36. Pilao, R.; Ramalho, E.; Pinho, C.. "Influence of initial pressure on the explosibility of cork dust/air mixtures". Journal of Loss Prevention in the Process Industries 17 1 (2004): 87-96. http://www.scopus.com/inward/record.url?eid=2-s2.0-0347983902&partnerID=MN8TOARS.
    10.1016/j.jlp.2003.09.008
  37. Paiva, J.M.; Pinho, c.; Figueiredo, R.. "The influence of the distributor plate on the bottom zone of a fluidized bed approaching the transition from bubbling to turbulent fluidization". Chemical Engineering Research and Design 82 1 (2004): 25-33. http://www.scopus.com/inward/record.url?eid=2-s2.0-0442328457&partnerID=MN8TOARS.
    10.1205/026387604772803043
  38. Ribeiro, L.; Pinho, C.. "Generic behaviour of propane combustion in fluidized beds". Chemical Engineering Research and Design 82 12 (2004): 1597-1603. http://www.scopus.com/inward/record.url?eid=2-s2.0-12444298004&partnerID=MN8TOARS.
    10.1205/cerd.82.12.1597.58039
  39. Pilao, R.; Ramalho, E.; Pinho, C.. "Influence of initial pressure on cork dust/air mixtures explosibility". Journal De Physique. IV : JP 12 7 (2002): http://www.scopus.com/inward/record.url?eid=2-s2.0-0036669653&partnerID=MN8TOARS.
  40. Branco, J.F.; Pinho, C.T.; Figueiredo, R.A.. "First and second-law efficiencies in a new thermodynamical diagram". Journal of Non-Equilibrium Thermodynamics 27 3 (2002): 239-256. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036447598&partnerID=MN8TOARS.
    10.1515/JNETDY.2002.014
  41. Ran¨gel, N.; Santos, A.; Pinho, C.. "Pressure drop in packed shallow beds of cylindrical cork stoppers". Chemical Engineering Research and Design 79 5 (2001): 547-552. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035390720&partnerID=MN8TOARS.
    10.1205/02638760152424316
  42. Branco, J.F.; Pinho, C.T.; Figueiredo, R.A.. "A dimensionless analysis of radial heat conduction with variable external convection boundary conditions". International Communications in Heat and Mass Transfer 28 4 (2001): 489-497. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035329295&partnerID=MN8TOARS.
    10.1016/S0735-1933(01)00253-6
  43. Paiva, J.M.; Pinho, C.; Figueiredo, R.. "Distributor plate influence on fluidisation quality, measuring pressure drop evolution in adjacent slices through the bed". American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED 251 (2000): 1167-1172. http://www.scopus.com/inward/record.url?eid=2-s2.0-0348168794&partnerID=MN8TOARS.
  44. Branco, J.F.; Pinho, C.T.; Figueiredo, R.A.. "Heat conduction in the hollow sphere with a power-law variation of the external heat transfer coefficient". International Communications in Heat and Mass Transfer 27 8 (2000): 1067-1076. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034310496&partnerID=MN8TOARS.
    10.1016/S0735-1933(00)00194-9

Other

Other output
  1. Influence of Burner Geometry on Flame Characteristics of Propane-Air Mixture: Experimental and Numerical Studies. 2008. C.E.L. Pinho; J.M.P.Q. Delgado; V. Ferreira; R. Pilão; C. Pinho. https://doi.org/10.4028%2F3-908451-51-5.162.
    10.4028/3-908451-51-5.162
  2. Numerical Study of Propane-Air Mixture Combustion in a Burner Element. 2008. C.E.L. Pinho; J.M.P.Q. Delgado; R. Pilão; J. Conde; C. Pinho. https://doi.org/10.4028%2F3-908451-51-5.144.
    10.4028/3-908451-51-5.144