???global.info.a_carregar???
Rui Novais is an Assistant Professor at the Department of Materials and Ceramic Engineering and CICECO-Aveiro Institute of Materials at University of Aveiro (UA). He obtained his PhD in Polymer Science and Composites, in 2012 from the University of Minho; ¿Functionalized carbon nanotubes for polymer based nanocomposites¿. Between 2012 and 2018 we had a postdoc position at UA working in the development of: - ceramic tiles for improving energy efficiency in buildings; - ceramic cookware compatible with induction cooking; - novel lightweight geopolymers for environmental remediation; - solar thermochemical production of hydrogen based on cork ecoceramics. In September 2018 he was awarded a Junior researcher grant by FCT (Portuguese Foundation for Science and Technology) to develop with performance geopolymers for environmental remediation applications. Ranked 1/125 Environ Biotech Eng panel; 9/2227 in all panels; Final Score 9.9/10 (CEEC 2017). In October 2020 he was awarded an Assistant Researcher grant by FCT. Ranked 3/59 Environ Biotech Eng panel; 28/1399 in all panels; Final Score 9.53/10 (CEEC 2019). He has expertise in chemistry, physics, polymer and materials science, on the development and characterisation of low thermal conductivity materials (traditional ceramics and geopolymer-foams); on PCM-containing building materials for improving buildings thermal performance; wastes valorisation, synthesis of ecoceramics for energy production, and activated carbons. He has published ca. 100 papers, 77 of which are in JCR SCI journals. He is also the first author of two book chapter on lightweight inorganic polymers and the first author of a review paper on geopolymer foams published in Progress in Materials Science. He has >2930 citations, and a h-index of 33 (Scopus).
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Rui Miguel Teixeira Novais

Identificadores de autor

Ciência ID
1F17-526F-DB94
ORCID iD
0000-0001-5698-9135
Researcher Id
X-2771-2019
Scopus Author Id
35730318500

Endereços de correio eletrónico

  • ruimnovais@ua.pt (Profissional)

Moradas

  • Universidade de Aveiro. Campus Universitário de Santiago, 3810-193, Aveiro, Aveiro, Portugal (Profissional)

Websites

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Civil
  • Ciências da Engenharia e Tecnologias - Engenharia do Ambiente
  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais - Cerâmica
  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais - Compósitos
  • Ciências da Engenharia e Tecnologias - Biotecnologia Industrial - Novos Materiais de Bio-derivados
  • Ciências Exatas - Química - Ciência de Polímeros
  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais - Papel e Madeira

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Inglês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Alemão Utilizador elementar (A1) Utilizador elementar (A1) Utilizador elementar (A1) Utilizador elementar (A1)
Francês Utilizador elementar (A1) Utilizador elementar (A1) Utilizador elementar (A1) Utilizador elementar (A1)
Formação
Grau Classificação
2013/09/23 - 2013/12/19
Concluído
 German course - level A1.2 (Outros)
Universidade de Aveiro, Portugal
 19
2013/02/25 - 2013/06/07
Concluído
 German course - level A1.1 (Outros)
Especialização em Level A1.1
Universidade de Aveiro, Portugal
 19
2012/07/23
Concluído
 Ciência e Engenharia de Polímeros e Compósitos (Doutoramento)
Especialização em Sem especialidade
Universidade do Minho, Portugal
"Functionalized carbon nanotubes for polymer based nanocomposites " (TESE/DISSERTAÇÃO)
2005
Concluído
 Licenciatura em Física e Química (ensino de) (Licenciatura)
Universidade do Minho Escola de Ciências, Portugal
"n/a" (TESE/DISSERTAÇÃO)
 16
Percurso profissional

Outros

Categoria Profissional
Instituição de acolhimento 		Empregador
2021/04/01 - Atual Assistant Researcher (FCT): "Multifunctional bauxite inorganic polymers for acid mine drainage treatment from Portuguese Mines" CICECO - Aveiro Institute of Materials, Portugal
Universidade de Aveiro, Portugal
2019/03/01 - 2021/03/31 Júnior Researcher (FCT): "Synthesis of low cost, high performance, sustainable waste-based geopolymer spheres for adsorption and pH buffering applications" CICECO - Aveiro Institute of Materials, Portugal
2019/01/10 - 2019/02/28 Junior researcher working on the development of novel CeO2-based Ecoceramics, and novel activated cork carbons for the absorption and removal of pollutants. Universidade de Aveiro CICECO, Portugal
2016/06/16 - 2018/01/09 Post-doctoral position, working in the development of cerium oxide ecoceramics using cork as a sustainable template. CICECO - Aveiro Institute of Materials, Portugal
2015/08/17 - 2016/06/15 Post-doctoral position, working in the development of lightweight geopolymers. Universidade de Aveiro CICECO, Portugal
2014/09/01 - 2015/08/15 Post-doctoral position, working in the development of ceramic cookware compatible with induction cooking. CICECO - Aveiro Institute of Materials, Portugal
2012/10/01 - 2014/08/31 Post-doctoral position, working in the development of ceramic tiles for improving energy efficiency in buildings. CICECO - Aveiro Institute of Materials, Portugal
2007/07/01 - 2012/07 Aluno de doutoramento Instituto de Nanoestruturas Nanomodelação e Nanofabricação, Portugal
2007/03/01 - 2007/05/31 Scientific Researcher. Responsible for the development of the project “New Thermoplastic Based Composites for Highly Demanding Space Applications”. Universidade do Minho, Portugal
2006/11/01 - 2007/01/31 Researcher assistant on a project funded by the Portuguese National Science Foundation (FCT), POCI/QUI/59835/2004 Universidade do Minho, Portugal
Projetos

Bolsa

Designação Financiadores
2018 - 2020 Porous ceramics from industrial wastes for insulating applications
DST/INT/Port/P-08/2017
Outra
Universidade de Aveiro CICECO, Portugal
 Fundação para a Ciência e a Tecnologia
Em curso
2016/06 - 2019/03 H2CORK -Solar thermochemical production of hydrogen based on cork Ecoceramics
BPD/UI50/6258/2016
 FCT (Lisbon, Portugal)
2015/08 - 2016/06 Lightweigth geopolymers
CICECO- UID/CTM/50011/2013
 CICECO - Aveiro Institute of Materials
2014/09 - 2015/08 INDUCER - Ceramic cookware compatible with induction cooking
BPD/UI50/6258/2014 (project 38916)
 QREN (Lisbon, Portugal)
2012/10 - 2014/08 ThermoCer
BPD/UI89/6258/2012 (project Pest-C/CTM/LA0011/2011)
 QREN (Lisbon, Portugal)
2007/03 - 2007/05 Parmax
ESTEC/16813/0/NL/PA-ccn3
 European Space Agency
2006/11 - 2007/01 Organic functionalization of carbon nanofibres and study of their composites with polymer matrices
POCI/QUI/59835/2004
 FTC (Lisbon, Portugal)

Outro

Designação Financiadores
2021/03/01 - 2024/02/29 MAXIMUM - Multifunctional bauxite inorganic polymers for acid mine drainage treatment from Portuguese Mines
PTDC-CTM-CTM-2205-2020
Investigador responsável
Universidade de Aveiro, Portugal
 Fundação para a Ciência e a Tecnologia
Em curso
2020/12/01 - 2022/11/30 SMART-G - Smart geopolymers
ERA-MIN/0001/2019
Investigador responsável
Universidade de Aveiro, Portugal
 Fundação para a Ciência e a Tecnologia
Em curso
2016/03 - 2018/02 Desenvolvimento de revestimentos hidráulicos geopoliméricos de baixa energia a partir de resíduos sólidos industriais
FCT/CAPES/88887.125458/2016-00
Outra
Instituto Politécnico de Viana do Castelo, Portugal
 Fundação para a Ciência e a Tecnologia
Concluído
Produções

Publicações

Artigo em conferência
  1. Novais, Rui Miguel Teixeira; Carvalheiras, João António de Sousa; Ascensão, G.; Tobaldi DM; Seabra MP; Labrincha JA. "Waste-based alkali activated materials for wastewater treatment". Trabalho apresentado em 39th Cement and Concrete Science Conference, Bath, 2019.
    Publicado
  2. Helio Jorge; Novais, Rui Miguel Teixeira; Sonia Bastos; Paula Seabra; João António Labrincha. "Incorporation of phase change materials (PCM) in ceramics for building applications". Trabalho apresentado em Seminar PCMs4Buildings PCMs: Thermophysical characterization and buildings' applications, Coimbra, 2018.
    Publicado
  3. Novais, Rui Miguel Teixeira; Carvalheiras, João; Seabra MP; Labrincha JA. "Innovative use for geopolymers containing high red mud content". Trabalho apresentado em 2nd International Bauxite Residue Valorisation and Best Pratices Conference BR2018, Athens, 2018.
    Publicado
  4. Saeli, M.; Novais, R.M.; Seabra, M.P.; Labrincha, J.A.. "Mix design and mechanical performance of geopolymer binder for sustainable construction and building material". 2017.
    10.1088/1757-899X/264/1/012002
  5. Novais, Rui Miguel Teixeira; Ascensão, G.; Seabra, M.P.; Labrincha, J.A.. "Lightweight waste-containing geopolymers for novel applications". Trabalho apresentado em 5th International Slag Valorisation Symposium, From Fundamentals to applications, Leuven, 2017.
    Publicado
  6. Novais, Rui Miguel Teixeira; Buruberri LH; Ascensão G; Seabra MP; Dias-Ferreira, Celia; Labrincha JA. "Reuse of glass wastes from end-of-life fluorescent lamp in geopolymers for construction materials". Trabalho apresentado em International Symposium on Enhanced Landfill Mining, Lisbon, 2016.
    Publicado
  7. Novais, Rui Miguel Teixeira; Buruberri LH; Ascensão, G.; Seabra MP; Labrincha JA. "Low thermal conductivity geopolymers produced from fly ash based industrial wastes". Trabalho apresentado em International Symposium on Enhanced Landfill Mining, Lisbon, 2016.
    Publicado
  8. Nouairi, J.; Medhioub, M.; Senff, L.; Hajjaji, W.; Rocha, F.; Novais, R.; Beruberri, L.; Labrincha, J.A.. "Mining tailing reuse in sulfobelitic clinker formulations". 2015.
  9. L. Buruberri; Novais, Rui Miguel Teixeira; M.P. Seabra; J.A. Labrincha. "Novel ceramic products based on industrial wastes". Trabalho apresentado em 6th International Conference on Mechanics and Materials in Design, Ponta Delgada, 2015.
    Publicado
  10. Novais, Rui Miguel Teixeira; M.P. Seabra. "Novel ceramic tiles produced with wood waste". Trabalho apresentado em 6th International Conference on Mechanics and Materials in Design, Ponta Delgada, 2015.
    Publicado
  11. Novais, Rui Miguel Teixeira; MP Seabra; Batista, João António Labrincha. "Lightweight bi-layered ceramic tiles for novel applications". Trabalho apresentado em 13th International Ceramics Congress, Montecatini, 2014.
    Publicado
Artigo em revista
  1. Caetano, Ana P. F.; Carvalheiras, João; Senff, Luciano; Seabra, Maria P.; Pullar, Robert C.; Labrincha, João A.; Novais, Rui M.. "Unravelling the Affinity of Alkali-Activated Fly Ash Cubic Foams towards Heavy Metals Sorption". Materials 15 4 (2022): 1453. http://dx.doi.org/10.3390/ma15041453.
    10.3390/ma15041453
  2. Daniela Carolina Paz Gómez; Ines Vilarinho; Silvia Pérez Moreno; João Carvalheiras; José Luis Guerrero; Rui Novais; MP Seabra; et al. "Immobilization of Hazardous Wastes on One-Part Blast Furnace Slag-Based Geopolymers". Sustainability (2021): https://www.mdpi.com/2071-1050/13/23/13455.
    10.3390/su132313455
  3. Gonçalves, Margarida; Novais, Rui M.; Senff, Luciano; Carvalheiras, João; Labrincha, João A.. "PCM-containing bi-layered alkali-activated materials: A novel and sustainable route to regulate the temperature and humidity fluctuations inside buildings". Building and Environment 205 (2021): 108281. http://dx.doi.org/10.1016/j.buildenv.2021.108281.
    10.1016/j.buildenv.2021.108281
  4. Novais, Rui M.; Senff, Luciano; Carvalheiras, João; Lacasta, Ana M.; Cantalapiedra, Inma R.; Labrincha, João A.. "Simple and effective route to tailor the thermal, acoustic and hygrothermal properties of cork-containing waste derived inorganic polymer composites". Journal of Building Engineering 42 (2021): 102501. http://dx.doi.org/10.1016/j.jobe.2021.102501.
    10.1016/j.jobe.2021.102501
  5. Simão, Lisandro; Souza, Marcelo Tramontin; Ribeiro, Manuel J.; Klegues Montedo, Oscar Rubem; Hotza, Dachamir; Novais, Rui M.; Raupp-Pereira, Fabiano. "Assessment of the recycling potential of stone processing plant wastes based on physicochemical features and market opportunities". Journal of Cleaner Production 319 (2021): 128678. http://dx.doi.org/10.1016/j.jclepro.2021.128678.
    10.1016/j.jclepro.2021.128678
  6. Gonçalves, Margarida; Vilarinho, Inês Silveirinha; Capela, Marinélia; Caetano, Ana; Novais, Rui Miguel; Labrincha, João António; Seabra, Maria Paula. "Waste-Based One-Part Alkali Activated Materials". Materials 14 11 (2021): 2911. http://dx.doi.org/10.3390/ma14112911.
    10.3390/ma14112911
  7. Gameiro, Tânia; Novais, Rui M.; Correia, Catarina L.; Carvalheiras, João; Seabra, Maria P.; Tarelho, Luís A. C.; Labrincha, João A.; Capela, Isabel. "Role of waste-based geopolymer spheres addition for pH control and efficiency enhancement of anaerobic digestion process". Bioprocess and Biosystems Engineering (2021): http://dx.doi.org/10.1007/s00449-021-02522-w.
    Publicado • 10.1007/s00449-021-02522-w
  8. Simão, Lisandro; De Rossi, Andreia; Hotza, Dachamir; Ribeiro, Manuel J.; Novais, Rui M.; Klegues Montedo, Oscar R.; Raupp-Pereira, Fabiano. "Zeolites-containing geopolymers obtained from biomass fly ash: Influence of temperature, composition, and porosity". Journal of the American Ceramic Society 104 2 (2020): 803-815. http://dx.doi.org/10.1111/jace.17512.
    10.1111/jace.17512
  9. Simão, L.; Hotza, D.; Ribeiro, M.J.; Novais, R.M.; Montedo, O.R.K.; Raupp-Pereira, F.. "Development of new geopolymers based on stone cutting waste". Construction and Building Materials 257 (2020): 119525. http://dx.doi.org/10.1016/j.conbuildmat.2020.119525.
    Publicado • 10.1016/j.conbuildmat.2020.119525
  10. Novais, Rui M.; Carvalheiras, João; Seabra, Maria P.; Pullar, Robert C.; Labrincha, João A.. "Highly efficient lead extraction from aqueous solutions using inorganic polymer foams derived from biomass fly ash and metakaolin". Journal of Environmental Management 272 (2020): 111049. http://dx.doi.org/10.1016/j.jenvman.2020.111049.
    Publicado • 10.1016/j.jenvman.2020.111049
  11. Haeussler, Anita; Abanades, Stéphane; Costa Oliveira, Fernando A.; Barreiros, M. Alexandra; Caetano, A. P. F.; Novais, Rui M.; Pullar, Robert C.. "Solar Redox Cycling of Ceria Structures Based on Fiber Boards, Foams, and Biomimetic Cork-Derived Ecoceramics for Two-Step Thermochemical H2O and CO2 Splitting". Energy & Fuels 34 7 (2020): 9037-9049. http://dx.doi.org/10.1021/acs.energyfuels.0c01240.
    Publicado • 10.1021/acs.energyfuels.0c01240
  12. Novais, Rui M.; Senff, Luciano; Carvalheiras, João; Labrincha, João A.. "Bi-Layered Porous/Cork-Containing Waste-Based Inorganic Polymer Composites: Innovative Material towards Green Buildings". Applied Sciences 10 9 (2020): 2995. http://dx.doi.org/10.3390/app10092995.
    Acesso aberto • Publicado • 10.3390/app10092995
  13. Carvalheiras, João; Novais, Rui M.; Mohseni, Farzin; Amaral, João S.; Seabra, Maria P.; Labrincha, João A.; Pullar, Robert C.. "Synthesis of red mud derived M-type barium hexaferrites with tuneable coercivity". Ceramics International 46 5 (2020): 5757-5764. http://dx.doi.org/10.1016/j.ceramint.2019.11.025.
    Publicado • 10.1016/j.ceramint.2019.11.025
  14. Novais, Rui M.; Pullar, Robert.C.; Labrincha, João A.. "Geopolymer foams: An overview of recent advancements". Progress in Materials Science 109 (2020): 100621. http://dx.doi.org/10.1016/j.pmatsci.2019.100621.
    Publicado • 10.1016/j.pmatsci.2019.100621
  15. Senff, L.; Novais, R.M.; Carvalheiras, J.; Labrincha, J.A.. "Eco-friendly approach to enhance the mechanical performance of geopolymer foams: Using glass fibre waste coming from wind blade production". Construction and Building Materials 239 (2020): 117805. http://dx.doi.org/10.1016/j.conbuildmat.2019.117805.
    10.1016/j.conbuildmat.2019.117805
  16. Novais, Rui M.; Carvalheiras, João; Senff, Luciano; Lacasta, Ana M.; Cantalapiedra, Inma R.; Giro-Paloma, Jessica; Seabra, Maria P.; Labrincha, João A.. "Multifunctional cork – alkali-activated fly ash composites: A sustainable material to enhance buildings’ energy and acoustic performance". Energy and Buildings 210 (2020): 109739. http://dx.doi.org/10.1016/j.enbuild.2019.109739.
    10.1016/j.enbuild.2019.109739
  17. Costa Oliveira, Fernando Almeida; Barreiros, M. Alexandra; Haeussler, Anita; Caetano, Ana; Mouquinho, Ana Isabel; Oliveira e Silva, Pedro Miguel; Novais, Rui M.; Pullar, Robert Carlyle; Abanades, Stéphane. "High performance cork-templated ceria for solar thermochemical hydrogen production via two-step water-splitting cycles". Sustainable Energy & Fuels (2020): http://dx.doi.org/10.1039/d0se00318b.
    No prelo • 10.1039/d0se00318b
  18. Tânia Gameiro; Novais, Rui Miguel Teixeira; Catarina Correia; João António de Sousa Carvalheiras (9B1E-DFD0-C41F); Maria Paula Seabra; João António Labrincha Baptista (D819-2C2C-7A16); Armando da Costa Duarte (6F14-D930-774A); MARIA ISABEL APARÍCIO PAULO FERNANDES CAPELA (C217-7708-5031). "Red mud-based inorganic polymer spheres: innovative and environmentally friendly anaerobic digestion enhancers". Bioresource Technology (2020):
    Aceite para publicação • 10.1016/j.biortech.2020.123904
  19. Quarta, A.; Novais, R.M.; Bettini, S.; Iafisco, M.; Pullar, R.C.; Piccirillo, C.. "A sustainable multi-function biomorphic material for pollution remediation or UV absorption: Aerosol assisted preparation of highly porous ZnO-based materials from cork templates". Journal of Environmental Chemical Engineering 7 2 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85061577503&partnerID=MN8TOARS.
    10.1016/j.jece.2019.102936
  20. Novais, R.M.; Carvalheiras, J.; Senff, L.; Seabra, M.P.; Pullar, R.C.; Labrincha, J.A.. "In-depth investigation of the long-term strength and leaching behaviour of inorganic polymer mortars containing green liquor dregs". Journal of Cleaner Production 220 (2019): 630-641. http://www.scopus.com/inward/record.url?eid=2-s2.0-85062725620&partnerID=MN8TOARS.
    10.1016/j.jclepro.2019.02.170
  21. Novais, R.M.; Carvalheiras, J.; Seabra, M.P.; Pullar, R.C.; Labrincha, J.A.. "Red mud-based inorganic polymer spheres bulk-type adsorbents and pH regulators". Materials Today (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85061082790&partnerID=MN8TOARS.
    10.1016/j.mattod.2019.01.014
  22. Novais, R.M.; Senff, L.; Carvalheiras, J.; Seabra, M.P.; Pullar, R.C.; Labrincha, J.A.. "Sustainable and efficient cork - inorganic polymer composites: An innovative and eco-friendly approach to produce ultra-lightweight and low thermal conductivity materials". Cement and Concrete Composites 97 (2019): 107-117. http://www.scopus.com/inward/record.url?eid=2-s2.0-85059313079&partnerID=MN8TOARS.
    10.1016/j.cemconcomp.2018.12.024
  23. Novais, R.M.; Carvalheiras, J.; Tobaldi, D.M.; Seabra, M.P.; Pullar, R.C.; Labrincha, J.A.. "Synthesis of porous biomass fly ash-based geopolymer spheres for efficient removal of methylene blue from wastewaters". Journal of Cleaner Production 207 (2019): 350-362. http://www.scopus.com/inward/record.url?eid=2-s2.0-85056178716&partnerID=MN8TOARS.
    10.1016/j.jclepro.2018.09.265
  24. Novais, R.M.; Pullar, R.C.. "Comparison of low and high pressure infiltration regimes on the density and highly porous microstructure of ceria ecoceramics made from sustainable cork templates". Journal of the European Ceramic Society 39 4 (2019): 1287-1296. http://www.scopus.com/inward/record.url?eid=2-s2.0-85057806365&partnerID=MN8TOARS.
    10.1016/j.jeurceramsoc.2018.11.050
  25. Lopez Gonzalez, P.L.; Novais, R.M.; Labrincha, J.A.; Blanpain, B.; Pontikes, Y.. "Modifications of basic-oxygen-furnace slag microstructure and their effect on the rheology and the strength of alkali-activated binders". Cement and Concrete Composites 97 (2019): 143-153. http://www.scopus.com/inward/record.url?eid=2-s2.0-85059447849&partnerID=MN8TOARS.
    10.1016/j.cemconcomp.2018.12.013
  26. De Rossi, A.; Simão, L.; Ribeiro, M.J.; Novais, R.M.; Labrincha, J.A.; Hotza, D.; Moreira, R.F.P.M.. "In-situ synthesis of zeolites by geopolymerization of biomass fly ash and metakaolin". Materials Letters 236 (2019): 644-648. http://www.scopus.com/inward/record.url?eid=2-s2.0-85056229533&partnerID=MN8TOARS.
    10.1016/j.matlet.2018.11.016
  27. Bumanis, G.; Novais, R.M.; Carvalheiras, J.; Bajare, D.; Labrincha, J.A.. "Metals removal from aqueous solutions by tailored porous waste-based granulated alkali-activated materials". Applied Clay Science 179 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85066255337&partnerID=MN8TOARS.
    10.1016/j.clay.2019.105147
  28. Hertel, T.; Novais, R.M.; Murillo Alarcón, R.; Labrincha, J.A.; Pontikes, Y.. "Use of modified bauxite residue-based porous inorganic polymer monoliths as adsorbents of methylene blue". Journal of Cleaner Production 227 (2019): 877-889. http://www.scopus.com/inward/record.url?eid=2-s2.0-85065045114&partnerID=MN8TOARS.
    10.1016/j.jclepro.2019.04.084
  29. De Rossi, A.; Ribeiro, M.J.; Labrincha, J.A.; Novais, R.M.; Hotza, D.; Moreira, R.F.P.M.. "Effect of the particle size range of construction and demolition waste on the fresh and hardened-state properties of fly ash-based geopolymer mortars with total replacement of sand". Process Safety and Environmental Protection 129 (2019): 130-137. http://www.scopus.com/inward/record.url?eid=2-s2.0-85068584337&partnerID=MN8TOARS.
    10.1016/j.psep.2019.06.026
  30. Novais, R.M.; Saeli, M.; Caetano, A.P.F.; Seabra, M.P.; Labrincha, J.A.; Surendran, K.P.; Pullar, R.C.. "Pyrolysed cork-geopolymer composites: A novel and sustainable EMI shielding building material". Construction and Building Materials 229 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85072187378&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2019.116930
  31. Pullar, R.C.; Novais, R.M.; Caetano, A.P.F.; Barreiros, M.A.; Abanades, S.; Oliveira, F.A.C.. "A Review of Solar Thermochemical CO2 Splitting Using Ceria-Based Ceramics With Designed Morphologies and Microstructures". Frontiers in Chemistry 7 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85072839490&partnerID=MN8TOARS.
    10.3389/fchem.2019.00601
  32. Costa Oliveira, F.A.; Barreiros, M.A.; Abanades, S.; Caetano, A.P.F.; Novais, R.M.; Pullar, R.C.. "Solar thermochemical CO 2 splitting using cork-templated ceria ecoceramics". Journal of CO2 Utilization 26 (2018): 552-563. http://www.scopus.com/inward/record.url?eid=2-s2.0-85048953144&partnerID=MN8TOARS.
    10.1016/j.jcou.2018.06.015
  33. Carneiro, J.; Tobaldi, D.M.; Hajjaji, W.; Capela, M.N.; Novais, R.M.; Seabra, M.P.; Labrincha, J.A.. "Red mud as a substitute coloring agent for the hematite pigment". Ceramics International 44 4 (2018): 4211-4219. http://www.scopus.com/inward/record.url?eid=2-s2.0-85043774946&partnerID=MN8TOARS.
    10.1016/j.ceramint.2017.11.225
  34. Novais, R.M.; Caetano, A.P.F.; Seabra, M.P.; Labrincha, J.A.; Pullar, R.C.. "Extremely fast and efficient methylene blue adsorption using eco-friendly cork and paper waste-based activated carbon adsorbents". Journal of Cleaner Production 197 (2018): 1137-1147. http://www.scopus.com/inward/record.url?eid=2-s2.0-85049913377&partnerID=MN8TOARS.
    10.1016/j.jclepro.2018.06.278
  35. Novais, R.M.; Ascensão, G.; Tobaldi, D.M.; Seabra, M.P.; Labrincha, J.A.. "Biomass fly ash geopolymer monoliths for effective methylene blue removal from wastewaters". Journal of Cleaner Production 171 (2018): 783-794. http://www.scopus.com/inward/record.url?eid=2-s2.0-85034117087&partnerID=MN8TOARS.
    10.1016/j.jclepro.2017.10.078
  36. Novais, R.M.; Carvalheiras, J.; Seabra, M.P.; Pullar, R.C.; Labrincha, J.A.. "Innovative application for bauxite residue: Red mud-based inorganic polymer spheres as pH regulators". Journal of Hazardous Materials 358 (2018): 69-81. http://www.scopus.com/inward/record.url?eid=2-s2.0-85049109886&partnerID=MN8TOARS.
    10.1016/j.jhazmat.2018.06.047
  37. Carneiro, J.; Capela, M.N.; Tobaldi, D.M.; Novais, R.M.; Seabra, M.P.; Labrincha, J.A.. "Red mud and electroplating sludge as coloring agents of distinct glazes: The influence of heat treatment". Materials Letters 223 (2018): 166-169. http://www.scopus.com/inward/record.url?eid=2-s2.0-85045191888&partnerID=MN8TOARS.
    10.1016/j.matlet.2018.04.013
  38. Novais, R.M.; Carvalheiras, J.; Capela, M.N.; Seabra, M.P.; Pullar, R.C.; Labrincha, J.A.. "Incorporation of glass fibre fabrics waste into geopolymer matrices: An eco-friendly solution for off-cuts coming from wind turbine blade production". Construction and Building Materials 187 (2018): 876-883. http://www.scopus.com/inward/record.url?eid=2-s2.0-85051146546&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2018.08.004
  39. Novais, R.M.; Carvalheiras, J.; Senff, L.; Labrincha, J.A.. "Upcycling unexplored dregs and biomass fly ash from the paper and pulp industry in the production of eco-friendly geopolymer mortars: A preliminary assessment". Construction and Building Materials 184 (2018): 464-472. http://www.scopus.com/inward/record.url?eid=2-s2.0-85049895463&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2018.07.017
  40. Saeli, M.; Novais, R.M.; Seabra, M.P.; Labrincha, J.A.. "Green geopolymeric concrete using grits for applications in construction". Materials Letters 233 (2018): 94-97. http://www.scopus.com/inward/record.url?eid=2-s2.0-85052469736&partnerID=MN8TOARS.
    10.1016/j.matlet.2018.08.102
  41. Novais, R.M.; Gameiro, T.; Carvalheiras, J.; Seabra, M.P.; Tarelho, L.A.C.; Labrincha, J.A.; Capela, I.. "High pH buffer capacity biomass fly ash-based geopolymer spheres to boost methane yield in anaerobic digestion". Journal of Cleaner Production 178 (2018): 258-267. http://www.scopus.com/inward/record.url?eid=2-s2.0-85041805343&partnerID=MN8TOARS.
    10.1016/j.jclepro.2018.01.033
  42. De Rossi, A.; Carvalheiras, J.; Novais, R.M.; Ribeiro, M.J.; Labrincha, J.A.; Hotza, D.; Moreira, R.F.P.M.. "Waste-based geopolymeric mortars with very high moisture buffering capacity". Construction and Building Materials 191 (2018): 39-46. http://www.scopus.com/inward/record.url?eid=2-s2.0-85054388533&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2018.09.201
  43. Carneiro, J.; Tobaldi, D.M.; Capela, M.N.; Novais, R.M.; Seabra, M.P.; Labrincha, J.A.. "Synthesis of ceramic pigments from industrial wastes: Red mud and electroplating sludge". Waste Management 80 (2018): 371-378. http://www.scopus.com/inward/record.url?eid=2-s2.0-85053848693&partnerID=MN8TOARS.
    10.1016/j.wasman.2018.09.032
  44. Novais, R.M.; Ascensão, G.; Ferreira, N.; Seabra, M.P.; Labrincha, J.A.. "Influence of water and aluminium powder content on the properties of waste-containing geopolymer foams". Ceramics International 44 6 (2018): 6242-6249. http://www.scopus.com/inward/record.url?eid=2-s2.0-85039921637&partnerID=MN8TOARS.
    10.1016/j.ceramint.2018.01.009
  45. Rosso, Fábio; Nandi, Vitor de Souza; Zaccaron, Alexandre; Montedo, Oscar Rubem Klegues; Novais, Rui Miguel Teixiera; Batista, João António Labrincha. "DESENVOLVIMENTO DE BLOCO CELULAR CERÂMICO USANDO PÓ DE ALUMÍNIO COMO AGENTE GERADOR DE POROS". Tecnologia em Metalurgia Materiais e Mineração 15 4 (2018): 377-383. http://dx.doi.org/10.4322/2176-1523.20181366.
    10.4322/2176-1523.20181366
  46. Saeli, Manfredi; Novais, Rui M.; Seabra, Maria Paula; Labrincha, João A.. "Mix design and mechanical performance of geopolymer binder for sustainable construction and building material". IOP Conference Series: Materials Science and Engineering 264 (2017): 012002. http://dx.doi.org/10.1088/1757-899x/264/1/012002.
    10.1088/1757-899x/264/1/012002
  47. Piccirillo, C.; Moreira, I.S.; Novais, R.M.; Fernandes, A.J.S.; Pullar, R.C.; Castro, P.M.L.. "Biphasic apatite-carbon materials derived from pyrolysed fish bones for effective adsorption of persistent pollutants and heavy metals". Journal of Environmental Chemical Engineering 5 5 (2017): 4884-4894. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029511296&partnerID=MN8TOARS.
    10.1016/j.jece.2017.09.010
  48. Novais, R.M.; Carvalheiras, J.; Seabra, M.P.; Pullar, R.C.; Labrincha, J.A.. "Effective mechanical reinforcement of inorganic polymers using glass fibre waste". Journal of Cleaner Production 166 (2017): 343-349. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029148062&partnerID=MN8TOARS.
    10.1016/j.jclepro.2017.07.242
  49. Pullar, R.C.; Novais, R.M.. "Ecoceramics". Materials Today 20 1 (2017): 45-46. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009817249&partnerID=MN8TOARS.
    10.1016/j.mattod.2016.12.004
  50. Novais, R.M.; Seabra, M.P.; Labrincha, J.A.. "Porous geopolymer spheres as novel pH buffering materials". Journal of Cleaner Production 143 (2017): 1114-1122. http://www.scopus.com/inward/record.url?eid=2-s2.0-85008166421&partnerID=MN8TOARS.
    10.1016/j.jclepro.2016.12.008
  51. Felizardo, V.; Nandi, V.S.; Donadel, K.; Novais, R.; Labrincha, J.; Zaccaron, A.. "Development of geopolymers of low thermal conductivity,Desenvolvimento de geopolímeros de baixa condutividade térmica". Revista Materia 21 2 (2016): 429-436. http://www.scopus.com/inward/record.url?eid=2-s2.0-84973473461&partnerID=MN8TOARS.
    10.1590/S1517-707620160002.0040
  52. Novais, R.M.; Ascensão, G.; Buruberri, L.H.; Senff, L.; Labrincha, J.A.. "Influence of blowing agent on the fresh- and hardened-state properties of lightweight geopolymers". Materials and Design 108 (2016): 551-559. http://www.scopus.com/inward/record.url?eid=2-s2.0-84978036560&partnerID=MN8TOARS.
    10.1016/j.matdes.2016.07.039
  53. Pullar, R.C.; Saeli, M.; Novais, R.M.; Amaral, J.S.; Labrincha, J.A.. "Valorisation of industrial iron oxide waste to produce magnetic barium hexaferrite". ChemistrySelect 1 4 (2016): 819-825. http://www.scopus.com/inward/record.url?eid=2-s2.0-85031787626&partnerID=MN8TOARS.
    10.1002/slct.201500042
  54. Novais, R.M.; Ascensão, G.; Seabra, M.P.; Labrincha, J.A.. "Waste glass from end-of-life fluorescent lamps as raw material in geopolymers". Waste Management 52 (2016): 245-255. http://www.scopus.com/inward/record.url?eid=2-s2.0-84973450902&partnerID=MN8TOARS.
    10.1016/j.wasman.2016.04.003
  55. Novais, R.M.; Buruberri, L.H.; Ascensão, G.; Seabra, M.P.; Labrincha, J.A.. "Porous biomass fly ash-based geopolymers with tailored thermal conductivity". Journal of Cleaner Production 119 (2016): 99-107. http://www.scopus.com/inward/record.url?eid=2-s2.0-84959361811&partnerID=MN8TOARS.
    10.1016/j.jclepro.2016.01.083
  56. Novais, R.M.; Seabra, M.P.; Amaral, J.S.; Pullar, R.C.. "Hidden value in low-cost inorganic pigments as potentially valuable magnetic materials". Ceramics International 42 8 (2016): 9605-9612. http://www.scopus.com/inward/record.url?eid=2-s2.0-84960193390&partnerID=MN8TOARS.
    10.1016/j.ceramint.2016.03.045
  57. Novais, R.M.; Buruberri, L.H.; Seabra, M.P.; Bajare, D.; Labrincha, J.A.. "Novel porous fly ash-containing geopolymers for pH buffering applications". Journal of Cleaner Production 124 (2016): 395-404. http://www.scopus.com/inward/record.url?eid=2-s2.0-84977952452&partnerID=MN8TOARS.
    10.1016/j.jclepro.2016.02.114
  58. Novais, R.M.; Buruberri, L.H.; Seabra, M.P.; Labrincha, J.A.. "Novel porous fly-ash containing geopolymer monoliths for lead adsorption from wastewaters". Journal of Hazardous Materials 318 (2016): 631-640. http://www.scopus.com/inward/record.url?eid=2-s2.0-84979598038&partnerID=MN8TOARS.
    10.1016/j.jhazmat.2016.07.059
  59. Novais, R.M.; Ascensão, G.; Seabra, M.P.; Labrincha, J.A.. "Lightweight dense/porous PCM-ceramic tiles for indoor temperature control". Energy and Buildings 108 (2015): 205-214. http://www.scopus.com/inward/record.url?eid=2-s2.0-84942764260&partnerID=MN8TOARS.
    10.1016/j.enbuild.2015.09.019
  60. Novais, R.M.; Seabra, M.P.; Labrincha, J.A.. "Wood waste incorporation for lightweight porcelain stoneware tiles with tailored thermal conductivity". Journal of Cleaner Production 90 (2015): 66-72. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922875708&partnerID=MN8TOARS.
    10.1016/j.jclepro.2014.11.045
  61. Novais, R.M.; Seabra, M.P.; Labrincha, J.A.. "Lightweight dense/porous bi-layered ceramic tiles prepared by double pressing". Journal of Materials Processing Technology 216 (2015): 169-177. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907637714&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2014.09.010
  62. Novais, Rui M.; Seabra, Maria P.; Labrincha, João A.. "Lightweight Bi-Layered Ceramic Tiles for Novel Applications". Advances in Science and Technology 91 (2014): 82-87. http://dx.doi.org/10.4028/www.scientific.net/ast.91.82.
    10.4028/www.scientific.net/ast.91.82
  63. Novais, R.M.; Seabra, M.P.; Labrincha, J.A.. "Ceramic tiles with controlled porosity and low thermal conductivity by using pore-forming agents". Ceramics International 40 8 PART A (2014): 11637-11648. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903831479&partnerID=MN8TOARS.
    10.1016/j.ceramint.2014.03.163
  64. Novais, R.M.; Simon, F.; Pötschke, P.; Villmow, T.; Covas, J.A.; Paiva, M.C.. "Poly(lactic acid) composites with poly(lactic acid)-modified carbon nanotubes". Journal of Polymer Science, Part A: Polymer Chemistry 51 17 (2013): 3740-3750. http://www.scopus.com/inward/record.url?eid=2-s2.0-84881255394&partnerID=MN8TOARS.
    10.1002/pola.26778
  65. Novais, R.M.; Covas, J.A.; Paiva, M.C.. "The effect of flow type and chemical functionalization on the dispersion of carbon nanofiber agglomerates in polypropylene". Composites Part A: Applied Science and Manufacturing 43 6 (2012): 833-841. http://www.scopus.com/inward/record.url?eid=2-s2.0-84858182826&partnerID=MN8TOARS.
    10.1016/j.compositesa.2012.01.017
  66. Novais, R.M.; Simon, F.; Paiva, M.C.; Covas, J.A.. "The influence of carbon nanotube functionalization route on the efficiency of dispersion in polypropylene by twin-screw extrusion". Composites Part A: Applied Science and Manufacturing 43 12 (2012): 2189-2198. http://www.scopus.com/inward/record.url?eid=2-s2.0-84866166516&partnerID=MN8TOARS.
    10.1016/j.compositesa.2012.08.004
  67. Paiva, M.C.; Novais, R.M.; Araújo, R.F.; Pederson, K.K.; Proença, M.F.; Silva, C.J.R.; Costa, C.M.; Lanceros-Méndez, S.. "Organic functionalization of carbon nanofibers for composite applications". Polymer Composites 31 3 (2010): 369-376. http://www.scopus.com/inward/record.url?eid=2-s2.0-76949095392&partnerID=MN8TOARS.
    10.1002/pc.20813
  68. Paiva, M.C.; Xu, W.; Fernanda Proença, M.; Novais, R.M.; Lægsgaard, E.; Besenbacher, F.. "Unzipping of functionalized multiwall carbon nanotubes induced by STM". Nano Letters 10 5 (2010): 1764-1768. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952329449&partnerID=MN8TOARS.
    10.1021/nl100240n
  69. Paiva, M.C.; Simon, F.; Novais, R.M.; Ferreira, T.; Proenca, M.F.; Xu, W.; Besenbacher, F.. "Controlled functionalization of carbon nanotubes by a solvent-free multicomponent approach". ACS Nano 4 12 (2010): 7379-7386. http://www.scopus.com/inward/record.url?eid=2-s2.0-78650735716&partnerID=MN8TOARS.
    10.1021/nn1022523
Artigo em revista (magazine)
  1. Novais, Rui Miguel Teixeira; MP Seabra; JA Labrincha. "Materiais cerâmicos com propriedades térmicas melhoradas", Kéramica, 2015
Capítulo de livro
  1. Adriano Pinho; Susana Barreto; Novais, Rui Miguel Teixeira. "Eco-cimento, novas possibilidades em design de produto". In Investigação e Ensino em Design e Música, 35-41. Castelo Branco, Portugal: RETHINK - Research Group on Design for the Territory e Edições IPCB, 2020.
    Publicado
  2. Novais, Rui Miguel Teixeira; Joao Antonio Labrincha. "Lightweight inorganic polymers: going beyond conventional applications". In VITROGEOWASTES. Extension TC05 (ICG). Vitrification and geopolymerization of wastes for immobilization or recycling, editado por Jordán MM; Pinet O; Rincón JMa, 239-257. Alicante, Espanha: University Miguel Hernández (UMH), 2019.
    Publicado
  3. Nouairi, J.; Medhioub, M.; Senff, Luciano; Hajjaji, W.; Rocha, F.; Novais, Rui Miguel Teixeira; Buruberri, L.H.; Labrincha JA. "Mining tailing reuse in sulfobelitic clinker formulations". In Wastes: Solutions, Treatments and Opportunities - Selected Papers from the 3rd Edition of the International Conference on Wastes: Solutions, Treatments and Opportunities, editado por Vilarinho C; Castro, F.; Russo M, 183-188. London, Reino Unido: Taylor & Francis Group, 2015.
    Publicado
Poster em conferência
  1. Jorge Carneiro; DM Tobaldi; MN Capela; Novais, Rui Miguel Teixeira; MP Seabra; JA Labrincha. "Waste-based ceramic pigments prepared from: electroplating sludge, marble and granite sawing dust". Trabalho apresentado em 7th International Conference on Sustainable Solid Waste Management, June 26-29, 2019, Heraklion, Crete, Greece., 2019.
  2. Novais, Rui Miguel Teixeira; João António de Sousa Carvalheiras; MP Seabra; Robert C. Pullar (D51F-B2C3-B82C); JA Labrincha. "Red mud-based inorganic polymer spheres: novel bulk-type pH regulator envisioned for anaerobic digestion". Trabalho apresentado em Jornadas CICECO 2019 - Where Science meets Society, June 11-12, 2019, Aveiro, Portugal., 2019.
  3. Robert C. Pullar; Novais, Rui Miguel Teixeira; L Senff; João António de Sousa Carvalheiras; MP Seabra; JA Labrincha. "Ultra-lightweight cork - geopolymer composites: a sustainable alternative to polymer foams". Trabalho apresentado em Jornadas CICECO 2019 - Where Science meets Society, June 11-12, 2019, Aveiro, Portugal., 2019.
  4. João António de Sousa Carvalheiras; Novais, Rui Miguel Teixeira; L Senff; MP Seabra; Robert C. Pullar; JA Labrincha. "Dregs incorporation in geopolymeric mortar: leaching and mechanical behaviour". Trabalho apresentado em Jornadas CICECO 2019 - Where Science meets Society, June 11-12, 2019, Aveiro, Portugal., 2019.
  5. Novais, Rui Miguel Teixeira; L Senff; João António de Sousa Carvalheiras; MP Seabra; Robert C. Pullar (D51F-B2C3-B82C); JA Labrincha. "Ultralightweight cork-geopolymer composites: a sustainable alternative to polymer foams". Trabalho apresentado em Cork in Science and Applications 2019 (CSA 19), May 22-23, 2019, Palafrugell, Girona, Spain., 2019.
  6. Novais, Rui Miguel Teixeira; João António de Sousa Carvalheiras; DM Tobaldi; MP Seabra; JA Labrincha. "Novel inorganic polymer spheres for methylene blue extraction from wastewaters.". Trabalho apresentado em 7th International Conference on Engineering for Waste and Biomass Valorisation, WasteEng 2018, July 2-5, 2018, Prague, Czech Republic., 2018.
  7. Novais, Rui Miguel Teixeira; APF Caetano; Robert C. Pullar. "Waste-activated pyrolysed cork residues for removal of methylene blue from wastewaters". Trabalho apresentado em 7th International Conference on Engineering for Waste and Biomass Valorisation, WasteEng 2018, July 2-5, 2018, Prague, Czech Republic., 2018.
  8. LH Buruberri; Novais, Rui Miguel Teixeira; DM Tobaldi; MP Seabra; JA Labrincha. "Study of the processing parameters on the properties of biomass fly ash/metakaolin geopolymers through Taguchi method.". Trabalho apresentado em I Iberian Meeting on Material Science, XV Congresso Nacional de Materiales, July 4-6, 2018, Salamanca, Spain., 2018.
  9. João António de Sousa Carvalheiras; Novais, Rui Miguel Teixeira; DM Tobaldi; MP Seabra; Robert C. Pullar (D51F-B2C3-B82C); JA Labrincha. "Synthesis of Porous Biomass Fly Ash-based Geopolymer Spheres for Efficient Removal of Methylene Blue from Wastewaters". Trabalho apresentado em Jornadas CICECO 2018: living science together, June 11-12, 2018, Aveiro, Portugal., 2018.
  10. APF Caetano; Novais, Rui Miguel Teixeira; Robert C. Pullar. "Cork and paper waste-based activated carbon adsorbents for methylene blue removal". Trabalho apresentado em Jornadas CICECO 2018: living science together, June 11-12, 2018, Aveiro, Portugal., 2018.
  11. Novais, Rui Miguel Teixeira; MP Seabra; JA Labrincha. "Waste-based activated materials for environmental remediation applications". Trabalho apresentado em 3rd Green & Sustainable Chemistry Conference, May 13-16, 2018, Berlin, Germany., 2018.
  12. J Carneiro; Hajjaji, W.; MN Capela; DM Tobaldi; Novais, Rui Miguel Teixeira; MP Seabra; JA Labrincha. "Red mud as a stable pigment for ceramic glazes". Trabalho apresentado em VitroGeoWastes Seminar, Poster V18, Elche, Spain, 14-15 September (2017)., 2017.
  13. Saeli, Manfredi; Novais, Rui Miguel Teixeira; MP Seabra; JA Labrincha. "Green geopolymer-based mortars from paper pulp industry wastes for sustainable construction". Trabalho apresentado em VitroGeoWastes, Elche, Spain, 14-15 September (2017)., 2017.
  14. Novais, Rui Miguel Teixeira; G Ascensão; MP Seabra; JA Labrincha. "Innovative ceramic tiles to enhance buildings energy efficiency". Trabalho apresentado em 15th Conference & Exhibition of the European Ceramic Society (EcerS 2017), July 9-13, 2017, Budapest, Hungary., 2017.
  15. A De Rossi; MJ Ribeiro; JA Labrincha; Novais, Rui Miguel Teixeira; D Hotza; RFPM Moreira. "Recycling of clays-rich building residues and paper-industry fly ash as alternative raw materials in the geopolymerization process". Trabalho apresentado em XVI International Clay Conference, Session MI05, July 16-22, 2017, Granada, Spain., 2017.
  16. Marcelo Souza; F Raupp-Pereira; Novais, Rui Miguel Teixeira; JA Labrincha; MJ Ribeiro; AP Novaes de Oliveira. "Aluminum-hydroxide based-waste as an adsorbent for wastewater treatments". Trabalho apresentado em XVI International Clay Conference, Session ES02, July 16-22, 2017, Granada, Spain., 2017.
  17. Novais, Rui Miguel Teixeira; MN Capela; MP Seabra; JA Labrincha. "Valorisation of dregs by its incorporation in geopolymer mixtures". Trabalho apresentado em VIII International Symposium on Materials, April 9-12, 2017, Aveiro, Portugal., 2017.
  18. Novais, Rui Miguel Teixeira; Robert C. Pullar; Luis Gil; FAC Oliveira. "Solar thermochemical production of hydrogen based on cork ecoceramics". Trabalho apresentado em Fifth International Conference on Multifunctional, Hybrid and Nanomaterials, March 6-10, 2017, Lisbon, Portugal, 2017.
  19. Novais, Rui Miguel Teixeira; LH Buruberri; MP Seabra; D. Bajare; JA Labrincha. "High buffer capacity waste-containing geopolymers to enhance biogas production". Trabalho apresentado em Jornadas CICECO 2016: Energy – Trends and Future Challenges, June 8-9, Aveiro, Portugal., 2016.
  20. Novais, Rui Miguel Teixeira; LH Buruberri; G Ascensão; MP Seabra; JA Labrincha. "Low thermal conductivity geopolymers produced with industrial wastes". Trabalho apresentado em Third International Symposium on Enhanced Landfill Mining (ELFM III), February 8-10, 2016, Lisbon, Portugal., 2016.
  21. Robert C. Pullar (D51F-B2C3-B82C); MP Seabra; Novais, Rui Miguel Teixeira; Dias-Ferreira, Celia; JA Labrincha. "Diverse Strategies Developed at Aveiro for the Valorisation of Wastes into Valuable Materials". Trabalho apresentado em Third International Symposium on Enhanced Landfill Mining (ELFM III), February 8-10, 2016, Lisbon, Portugal., 2016.
  22. MP Seabra; Novais, Rui Miguel Teixeira; LH Buruberri; JA Labrincha. "Geopolymerization of pulp paper industrial wastes for thermal insulating applications". Trabalho apresentado em International Chemical Congress of Pacific Basin Societies, December 15-20, 2015, Hawaii, EUA., 2015.
  23. Nouairi, J.; Medhioub, M.; Senff, L.; Hajjaji, W.; Rocha, F.; Novais, Rui Miguel Teixeira; Buruberri, L.H.; Labrincha JA. "Formulations and study of sulfobelitic clinker obtained from Zn-Pb mining tailing". Trabalho apresentado em WASTES: Solutions, Treatments and Opportunities, 3rd International Conference, September 14-16, 2015, Viana do Castelo, Portugal., 2015.
  24. Hajjaji, W.; Andrejkovicova, Slavka; Novais, Rui Miguel Teixeira; Labrincha JA; F. Rocha. "Waste recycling in metakaolin based geopolymers". Trabalho apresentado em WASTES: Solutions, Treatments and Opportunities, 3rd International Conference, September 14-16, 2015, Viana do Castelo, Portugal, 2015.
  25. Novais, Rui Miguel Teixeira; MP Seabra; JA Labrincha. "Novel ceramic tiles produced with wood waste". Trabalho apresentado em 6th International Conference on Mechanics and Materials in Design, Ponta Delgada, July 26-30, 2015, Azores, Portugal, 2015.
  26. Novais, Rui Miguel Teixeira; MP Seabra; Robert C. Pullar. "Hidden value in ceramic pigments with magnetic properties". Trabalho apresentado em International Materials Symposium, June 21-23, 2015 (Porto, Portugal), 2015.
  27. Novais, Rui Miguel Teixeira; MP Seabra; Robert C. Pullar. "Novel inductive cookware based on traditional ceramic vessels made by a commercial process with conductive metallic coatings". Trabalho apresentado em 14th Conference of the European Ceramic Society (ECerS 2015), June 21-25, 2015 (Toledo, Spain), 2015.
  28. Novais, Rui Miguel Teixeira; MP Seabra; JA Labrincha. "Ceramic tiles for indoor temperature control". Trabalho apresentado em Jornadas CICECO 2015: Nanotechnology… From the lab to the industry, April 14-15 (Aveiro, Portugal), 2015.
  29. Novais, Rui Miguel Teixeira; MP Seabra; JA Labrincha. "Deposition of metallic films over porcelain substrates for producing inductive cookware". Trabalho apresentado em Jornadas CICECO 2015: Nanotechnology… From the lab to the industry, April 14-15 (Aveiro, Portugal), 2015.
  30. Novais, Rui Miguel Teixeira; MC Paiva; JA Covas. "Evaluation of carbon nanofibre dispersion in polypropylene: influence of the mixing method". Trabalho apresentado em III Annual Meeting I3N, February 11-12, 2011 (Fátima, Portugal), 2011.
  31. Novais, Rui Miguel Teixeira; MC Paiva; JA Covas; P¿tschke P; Villmow, T.. "Chemical functionalization of carbon nanotubes and its influence on composite properties.". Trabalho apresentado em Trends in NanoTechnology. September 06-10, 2010 (Braga, Portugal), 2010.
  32. Novais, Rui Miguel Teixeira; MC Paiva; Tânia Ferreira; MF Proença; F Simon; P¿tschke P; Xu W; Besenbacher, F.. "Reactive carbon nanotubes for strong interfaces in polymer composites". Trabalho apresentado em ChemonTubes, April 11-15, 2010 (Arcachon, France), 2010.
  33. MC Paiva; Novais, Rui Miguel Teixeira; MF Proença; E. Oliveira; E. Cunha; Besenbacher, F.; Xu, W.. "1,3-Dipolar cycloaddition reaction on CNT surfaces: precursor for graphene ribbon formation". Trabalho apresentado em ChemonTubes, April 11-15, 2010 (Arcachon, France), 2010.
  34. Novais, Rui Miguel Teixeira; MC Paiva; JA Covas. "Effect of melt mixing conditions on CNT / PP composite morphology and properties". Trabalho apresentado em II Annual Meeting I3N, February 5-6, 2010 (Fátima, Portugal), 2010.
  35. Novais, Rui Miguel Teixeira; MC Paiva; JA Covas; Paulo Cardoso; S Lanceros-Méndez. "Effect of melt mixing conditions on CNT / PP composite morphology and properties". Trabalho apresentado em 4th International Conference on Carbon Based Nanocomposites, September 20-23, 2009 (Hamburg, Germany), 2009.
  36. MC Paiva; Novais, Rui Miguel Teixeira; BA Oliveira; Tânia Ferreira; MF Proença; JA Covas; P¿tschke P; et al. "Chemical functionalization of carbon nanotubes for polymer composite formation". Trabalho apresentado em 4th International Conference on Carbon Based Nanocomposites, September 20-23, 2009 (Hamburg, Germany), 2009.
  37. Novais, Rui Miguel Teixeira; Tânia Ferreira; BA Oliveira; MC Paiva; P¿tschke P; Pleul D; Simon, F.. "Chemical functionalization of carbon nanotubes by the 1,3-dipolar cycloaddition reaction: the effect of temperature". Trabalho apresentado em Carbon, June 14-19, 2009 (Biarritz, France), 2009.
  38. MC Paiva; Novais, Rui Miguel Teixeira; BA Oliveira; Tânia Ferreira; JA Covas. "Polymer composites with chemically modified carbon nanotubes". Trabalho apresentado em Carbon, June 14-19, 2009 (Biarritz, France), 2009.
  39. Vera Cruz; Novais, Rui Miguel Teixeira; BA Oliveira; CI Martins; MC Paiva. "Influence of the chemical modification of carbon nanotubes on the degree of crystallinity of PA 6 composites". Trabalho apresentado em International Materials Symposium (Lisboa, Portugal), 2009.
  40. Novais, Rui Miguel Teixeira; MC Paiva; CI Martins; Paulo Pereira; MH Lopes. "The influence of carbon nanofibre/fibre functionalization on the properties of injection moulded polycarbonate composites". Trabalho apresentado em ChemOnTubes (Zaragoza, Spain), 2008.
  41. MC Paiva; Novais, Rui Miguel Teixeira; JA Covas; V Andrade. "The influence of extensional flow on the dispersion of functionalized carbon nanofibres in a polymer matrix". Trabalho apresentado em ChemOnTubes Zaragoza, Spain), 2008.
  42. MF Proença; FM Fernandes; RF Araújo; CJR Silva; Novais, Rui Miguel Teixeira; MC Paiva. "The Diels-Alder cycloaddition reaction in the functionalization of carbon nanofibers". Trabalho apresentado em ChemOnTubes (Zaragoza, Spain), 2008.
  43. Novais, Rui Miguel Teixeira; RF Araújo; KK Pedersen; MF Proença; MC Paiva; CJR Silva. "Carbon nanofibres functionalized by 1,3-dipolar cycloaddition and their reactivity with anhydrides". Trabalho apresentado em Dia da Escola de Engenharia 2007 (University of Minho), 2007.
  44. Novais, Rui Miguel Teixeira; RF Araújo; KK Pedersen; MF Proença; MC Paiva; CJR Silva. "Carbon nanofibres functionalized by 1,3-dipolar cycloaddition: reactivity with anhydrides". Trabalho apresentado em CNT-Polymer Composites International Conference (Cambridge, United Kingdom), 2007.
Tese / Dissertação
  1. Novais, Rui Miguel Teixeira. "Lama de anodização de alumínio: catalisador de argamassas de tipo III". Mestrado, Universidade de Aveiro, 2019. http://hdl.handle.net/10773/27573.
  2. Novais, Rui Miguel Teixeira. "Estudo da influência da pressão de compactação no processo de prensagem e das curvas de cozedura em peças de grés porcelânico". Mestrado, Universidade de Aveiro, 2019. http://hdl.handle.net/10773/27058.
  3. Gomes, Ana Rita Lebreiro. "Ativação de escória metalúrgica pela adição de fontes secundárias de alumina". Mestrado, 2018. http://hdl.handle.net/10773/24606.
  4. Moreira, Zuleica Andreia Lopes. "Valorização de resíduos da indústria da pasta do papel via geopolimerização". Mestrado, 2017. http://hdl.handle.net/10773/22050.
  5. Bento, Juliana Pereira São. "Desenvolvimento de superfícies refletoras em mosaicos cerâmicos". Mestrado, 2017. http://hdl.handle.net/10773/22569.
  6. Carvalheiras, João António de Sousa. "Estudo da reciclagem de resíduos de fibras de vidro em geopolímeros, argamassas e telas de impermeabilização". Mestrado, 2016. http://hdl.handle.net/10773/17198.
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2019/09 Waste-based alkali activated materials for wastewater treatment 39th Cement and Concrete Science Conference
(Bath, Reino Unido)
2019/09 Tailoring the porosity of bio-inspired ceria monoliths: influence of synthesis protocol on the microstructure of cork-templated ecoceramics 7th International Conference on the Shaping of Advanced Ceramics (Shaping 7)
(Aveiro, Portugal)
2019/07/10 Cork-based Ecoceramics: Lightweight porous 3-DOM oxide ceramics based on sustainable cork templates 4th International Workshop on Advanced Lightweight Materials and Structures
(Aveiro, Portugal)
2019/06 Extremely light and low thermal conductivity cork-geopolymer composites: a sustainable material to enhance buildings’ energy performance XVI Conference of the European Ceramic Society (ECerS 2019)
(Turin, Itália)
2019/06 Biomimetic 3-DOM ceria ecoceramics from sustainable cork templates for solar thermochemical CO2 splitting XVI Conference of the European Ceramic Society (ECerS 2019)
(Turin, Itália)
2019/06 Cork-containing alkali activated composites: a multifunctional ultra-light building material 7th International Conference on Sustainable Solid Waste Management
(Crete, Grécia)
2019/05 Pyrolysed cork wastes use for ultra-light-weight microwave absorbers, EMI shieldings or RAM material Cork in Science and Applications 2019 (CSA 19)
Cork Museum – Museu del Suro (Palafrugell, Girona, Espanha)
2018/11/30 Waste-based porous geopolymers for environmental applications III European Geopolymer Network
(Faenza, Itália)
2018/11 Cork-derived ceria ecoceramics for solar fuel production via thermochemical redox process using concentrated solar energy Solar Fuel Production Based on Nanostructured Photoelectrodes and Catalysts workshop
INL-International Iberian Nanotechnology Laboratory (Braga, Portugal)
2018/10 Pyrolysed cork waste as a sustainable microwave EMI shielding or RAM material 10th International Conference on Microwave Materials and their Applications (MMA2018)
(Osaka, Japão)
2018/10 Magnetic Ecoceramics: Hexagonal ferrite biomorphic / biomimetic 3DOM foams produced using cork as a natural sustainable template V Congreso Hispano-Luso de Cerámico Y Vidrio ( 5th Joint Congress of the Spanish and Portuguese Ceramic Societies)
(Barcelona, Espanha)
2018/10 Synthesis of eco-friendly waste-based geopolymer mortars using unexplored industrial wastes coming from the paper industry V Congreso Hispano-Luso de Cerámico Y Vidrio ( 5th Joint Congress of the Spanish and Portuguese Ceramic Societies)
(Barcelona, Espanha)
2018/10 Biomorphic ecoceramics prepared using cork as template agent Materials.it 2018
(Bologna, Itália)
2018/07 Inorganic polymers for out of the box applications using biomass fly ash waste 7th International Conference on Engineering for Waste and Biomass Valorisation, WasteEng 2018
(Prague, República Checa)
2018/06 Valorization of industrial wastes in green ceramic products CIMTEC – 14th Ceramics Congress
(Montecatini, Itália)
2018/06 3DOM ceria ecoceramics from sustainable cork templates for solar thermochemical CO2 splitting 7th International Conference on Engineering for Waste and Biomass Valorisation, WasteEng 2018
(Prague, República Checa)
2018/05 Innovative use for geopolymers containing high red mud content 2nd International Bauxite Residue Valorisation and Best Pratices Conference BR2018
(Athens, Grécia)
2018/05 Lightweight ceria ecoceramics using cork as template 3rd Green & Sustainable Chemistry Conference
(Berlin, Alemanha)
2017/09 Porous CeO2 ecoceramics using cork as template Cork in Science and Applications
(Aveiro, Portugal)
2017/09 Mix design and mechanical performance of geopolymer binder for sustainable construction and building materials International Conference on Building Materials and Materials Engineering (ICBMM 2017)
(Lyon, França)
2017/09 Low weight, highly porous, biomimetic 3-dom ecoceramics using cork as a natural sustainable template 2nd National Conference on Cellular Materials & International Conference of Dynamic Behaviour of Cellular Materials - MATCEL’2017
(Aveiro, Portugal)
2017/07 Innovative geopolymer spheres to boost biogas production XVI International Clay Conference
(Granada, Espanha)
2017/07 Waste-based geopolymer adsorbents for dye removal from wastewaters XVI International Clay Conference
(Granada, Espanha)
2017/04 Porous 3-DOM magnetic and dielectric cork-derived biomimetic ceramic foams Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2017)
(Nara, Japão)
2017/04 Lightweight waste-containing geopolymers for novel applications 5th International Slag Valorisation Symposium
(Leuven, Bélgica)
2017/04 Inorganic polymers reinforced with glass fibre waste for construction materials VIII International Symposium on Materials
(Aveiro, Portugal)
2017/03 Highly porous, low weight biomorphic/biomimetic ecoceramics using cork wood as a natural sustainable template Fifth International Conference on Multifunctional, Hybrid and Nanomaterials
(Lisbon, Portugal)
2016/11 Novel waste-containing geopolymers for environmental applications CBECIMAT 2016 (22nd Brazilian Conference on Materials Science and Engineering)
(Natal, Brasil)
2016/08 Novel biomass fly ash-based geopolymers for environmental applications 9th International Conference on Waste Management, Water Pollution, Indoor Climate (WWAI’16)
(Mallorca, Espanha)
2016/02 Reuse of glass wastes from end-of-life fluorescent lamp in geopolymers for construction materials Third International Symposium on Enhanced Landfill Mining (ELFM III)
(Lisbon, Portugal)
2015/06 Energy saving tiles International Materials Symposium
(Porto, Portugal)
2015/04 Innovative coatings for ceramic pots that can be used for induction cooking International Conference & Exhibition on Ceramic Interconnect & Ceramic Microsystems Technologies (CICMT)
(Dresden, Alemanha)
2015 Novel ceramic products based in industrial wastes 6th International Conference on Mechanics and Materials in Design – Symposium-22
(Ponta Delgada, Portugal)
2014/11/27 Ceramic materials with enhanced thermal properties Innovation in materials and ceramic technology (Seminar)
CTCV (Technological Centre of Ceramics and Glass (Coimbra, Portugal)
2014/06 Lightweight bi-layered ceramic tiles for novel applications 13th International Ceramics Congress (CIMTEC 2014)
(Montecatini, Itália)
2013 The influence of carbon nanotube functionalization on the dispersion in polypropylene by melt blending NanoPortugal
(Porto, Portugal)
2011/05 A comparative study of the dispersion of carbon nanofibers in polymer melts Polymer Processing Society 27
(Marrakech, Marrocos)
2011/04 Dispersion of carbon nanotubes in poly(lactic acid) Internacional Materials Symposium
(Guimarães, Portugal)
2010/10 Influence of mixing method and chemical functionalization of carbon nanotubes on composite properties Semana da Escola de Engenharia 2010
University of Minho (Guimarães, Portugal)
2010/07 Reactive carbon nanotubes for strong interfaces in polymer composites Carbon 2010
(Clemson, Estados Unidos)
2009/04 Injection moulded PC/CNF nanocomposites: study on the CNF functionalization effect International Materials Symposium
(Lisbon, Portugal)
2008/10 Carbon nanotubes: chemical functionalization for the dispersion in polymer matrices Semana da Escola de Engenharia 08
University of Minho (Guimarães, Portugal)
2007/09 Chemical functionalization of carbon nanofibres for the preparation of composites CNT-Polymer Composites International Conference
(Cambridge, Reino Unido)

Orientação

Título / Tema
Papel desempenhado 		Curso (Tipo)
Instituição / Organização
2021/01/01 - Atual Desenvolvimento de compósitos geopoliméricos multifuncionais para aplicação em bombas de calor
Orientador de Andreia Sousa
Universidade de Aveiro, Portugal
2021/01/01 - Atual Economia circular na indústria dos plásticos
Orientador de Vitor Neves
Universidade de Aveiro, Portugal
2020/02/01 - Atual Desenvolvimento de compósitos sustentáveis para a indústria da construção
Coorientador de Francisco Antunes
Ciências de Engenharia Mecânica (Mestrado)
Universidade de Aveiro, Portugal
2019/12/01 - Atual Geopolímeros multifuncionais à base de lamas vermelhas para tratamento de lixiviados ácidos de minas portuguesas
Coorientador de João António de Sousa Carvalheiras
Ciência e Engenharia de Materiais (Doutoramento)
Universidade de Aveiro, Portugal
2020/01/01 - 2021/02/11 Desenvolvimento de compósitos de cortiça para pavimentos
Orientador de Alice Dolganov
 Msc (Mestrado)
Universidade de Aveiro, Portugal
2020/01/01 - 2021/02/08 Valorização de resíduos industriais em argamassas-cola
Coorientador de Samuel José Almeida Moreira
Universidade de Aveiro, Portugal
2020/01/01 - 2020/11/17 Eco-cimento e as possibilidades em design do produto: desenvolvimento de iluminação sustentável
Coorientador de Adriano Pinho
Arte e Design para o Espaço Público (Mestrado)
Universidade do Porto Faculdade de Belas Artes, Portugal

Universidade de Aveiro, Portugal
2019/01/01 - 2019/09 Estudo da influência da pressão de compactação no processo de prensagem e das curvas de cozedura em peças de grés porcelânico
Coorientador de Joana Daniela Machado
Ciência e Engenharia de Materiais (Mestrado)
Universidade de Aveiro, Portugal
2019/01/01 - 2019/07/31 Uso de lama de anodização como potencial ligante de argamassas de presa rápida
Coorientador de André Capitão Marques
Ciência e Engenharia de Materiais (Mestrado)
Universidade de Aveiro, Portugal
2018/01/01 - 2018/07/31 Activação de escória metalúrgica a partir da adição de fontes secundarias de alumina
Coorientador de Ana Rita Gomes
Ciência e Engenharia de Materiais (Mestrado)
Universidade de Aveiro, Portugal
2017/01/01 - 2017/07/31 Desenvolvimento de superfícies reflectoras em mosaicos cerâmicos
Orientador de Juliana Pereira São Bento
Ciência e Engenharia de Materiais (Mestrado)
Universidade de Aveiro, Portugal
2017/01/01 - 2017/07/31 Valorização de resíduos da indústria da pasta do papel via geopolimerização
Coorientador de Zuleica Andreia Lopes Moreira
Ciência e Engenharia de Materiais (Mestrado)
Universidade de Aveiro, Portugal
2016/01/01 - 2016/09/30 Estudo da reciclagem de resíduos de fibras de vidro em geopolímeros, argamassas e telas de impermeabilização
Coorientador de João António de Sousa Carvalheiras
Ciência e Engenharia de Materiais (Mestrado)
Universidade de Aveiro, Portugal

Participação em evento

Descrição da atividade
Tipo de evento 		Nome do evento
Instituição / Organização
2019/11/26 - 2019/11/26 Workshop given by Rui Novais to European Students of Industrial Engineering and Management: "Ceramics: a brief overview"
Oficina (workshop)
 Ceramics: a brief overview
Universidade de Aveiro, Portugal
2019/10/02 - 2019/10/02 IV Analytic Chemistry Symposium: “Organic microcontaminants: a challenge for water reuse”, October 02, 2019, University of Aveiro, Aveiro, Portugal.
Simpósio
 IV Analytic Chemistry Symposium: “Organic microcontaminants: a challenge for water reuse
Universidade de Aveiro, Portugal
2019/09/27 - 2019/09/27 Promotion of culture and scientific pratices: Participation in the "European Researchs night Noite Europeia dos Investigadores | 27 de setembro", organized by the "Fábrica Centro Ciência Viva, Aveiro". Rui Novais has responsable for exhibiting geopolymer propotypes and sharing knowledge with younger generations.
Exposição
 Noite Europeia dos Investigadores
Universidade de Aveiro, Portugal
2019/06/20 - 2019/06/21 Seminar on “Geopolymers and Alkali Activated Materials”, XVI ECerS Conference, June 20-21, 2019, Torino, Italy.
Seminário
 Geopolymers and Alkali Activated Materials
CNR- Institute of Science and Technology for Ceramics (ISTEC), Itália
2018/12/03 - 2018/12/03 Pullar RC, Novais RM, Caetano APF, Oliveira FAC, Barreiros MA, Abanades S, Krishnakumar KA, Surendran KP. The versatility of cork as a porous material: Our work on using pyrolysed cork waste as an ultra-light-weight microwave EMI shielding or RAM material, and biomimetic ceria based on sustainable cork templates to split CO2 using concentrated solar light to create renewable fuels. National Institute for Interdisciplinary Science & Technology (NIIST-CSIR),
Seminário
 The versatility of cork as a porous material: Our work on using pyrolysed cork waste as an ultra-light-weight microwave EMI shielding or RAM material, and biomimetic ceria based on sustainable cork templates to split CO2 using concentrated solar light to create renewable fuels
National Institute for Interdisciplinary Science & Technology, Índia
2018/11/08 - 2018/11/08 Workshop on geopolymers: “Black is the new green- Matchmaking event”, November 08, 2018, Leuven, Belgium.
Oficina (workshop)
 Black is the new green- Matchmaking event
Katholieke Universiteit Leuven, Bélgica
2017/12/18 - 2017/12/20 Workshop on Emerging Technologies for Energy: Towards a Circular Economy, December 18-20, 2017, Porto, Portugal.
Oficina (workshop)
 Workshop on Emerging Technologies for Energy: Towards a Circular Economy
Universidade do Porto Faculdade de Ciências, Portugal
2017/11/20 - 2017/11/20 Invited Seminar: Hidden value in geopolymers: going beyond conventional applications
Seminário
 Hidden value in geopolymers: going beyond conventional applications
Universidade Federal de Santa Catarina, Brasil
2016/12/01 - 2016/12/02 Workshop on Waste Management: “From waste to resource: Sustainable waste management – Enhancing the use of secondary raw materials”, December 01-02, 2016, Budapest, Hungary.
Oficina (workshop)
 From waste to resource: Sustainable waste management – Enhancing the use of secondary raw materials
EIT-Climate KIC, Hungria
2016/11/11 - 2016/11/11 Invited Seminar: Geopolímeros: da compreensão à prática
Oficina (workshop)
 Geopolímeros: da compreensão à prática
Universidade Federal de Santa Catarina, Brasil
2016/11/10 - 2016/11/10 Invited Seminar: Novel waste-containing geopolymers for environmental applications
Seminário
 Novel waste-containing geopolymers for environmental applications
Universidade Federal de Santa Catarina, Brasil
2015/12/14 - 2015/12/15 Revolutionary ceramic cookware for induction cooking. Jornadas CICECO 2015: Nanotechnology… From the lab to the industry, April 14 and 15, 2015, Aveiro, Portugal (showcase stands; prototypes exhibition in Research Showcases to promote culture and scientific practices)
Exposição
 Jornadas CICECO 2015: Nanotechnology… From the lab to the industry
CICECO - Aveiro Institute of Materials, Portugal
2015/11/06 - 2015/12/06 Novel inductive cookware based on traditional ceramic vessels 12ª Bienal Internacional de Cerâmica Artística, November 6 till December 6, 2015, Aveiro, Portugal (showcase stand/prototypes exhibition in Seminar to promote culture and scientific practices) 12ª Bienal Internacional de Cerâmica Artística
Câmara Municipal de Aveiro, Portugal
2015/05/20 - 2015/05/20 Revolutionary ceramic cookware for induction cooking, Research Day, May 20, 2015, Aveiro, Portugal (showcase stand/ prototypes exhibition in Research Showcase)
Exposição
 Research Day 2015
Universidade de Aveiro, Portugal
2015/04/14 - 2015/04/15 Energy saving tiles. Jornadas CICECO 2015: Nanotechnology… From the lab to the industry, April 14 and 15, 2015, Aveiro, Portugal (showcase stands; prototypes exhibition in Research Showcases to promote culture and scientific practices)
Exposição
 Jornadas CICECO 2015: Nanotechnology… From the lab to the industry,
CICECO - Aveiro Institute of Materials, Portugal
2014/12/01 - 2014/12/05 Ceramic tiles with phase change materials for enhancing buildings thermal performance. CERURBIS – Cerâmica no Espaço Urbano, 1 a 5 de dezembro 2014, Aveiro, Portugal (showcase stands; prototypes exhibition in Research Showcases/Seminars to promote culture and scientific practices)
Exposição
 CERURBIS – Cerâmica no Espaço Urbano
Câmara Municipal de Aveiro, Portugal
2013/08/18 - 2013/08/21 EREAN Summer School on Rare Earth Technology, KU Leuven, August, 18-21, 2013, Leuven, Belgium.
Oficina (workshop)
 EREAN Summer School on Rare Earth Technology
Katholieke Universiteit Leuven, Bélgica

Júri de grau académico

Tema
Tipo de participação 		Nome do candidato (Tipo de grau)
Instituição / Organização
2017/11 Obtenção de clínquer de baixa energia a partir de resíduos da indústria de papel e celulose
Arguente principal
 Joana Gomes Meller (Mestrado)
Universidade Federal de Santa Catarina, Brasil

Arbitragem científica em revista

Nome da revista (ISSN) Editora
2020/02/26 - Atual Frontiers in Materials (2296-8016) Frontiers Media SA

Curso / Disciplina lecionado

Disciplina Curso (Tipo) Instituição / Organização
2020/09/01 - 2021/01/31 Responsible for the Course: "Análise do ciclo de vida e ssutentabilidade" under the Master in Additive Manufacturing; MSc. total lectures: 35 h. Additive Manufacturing (Curso de mestrado (conclusão do curso de especialização)) Universidade de Aveiro, Portugal
2019/09/01 - 2020/07/17 Co-responsible for the Course: Production technologies under the Industrial Engineering & Management; MSc. total lectures: 30 h. Industrial Engineering & Management; MSc (Mestrado integrado) Universidade de Aveiro, Portugal
2018/09/01 - 2019/08/31 Co-responsible for the Course: Production technologies under the Industrial Engineering & Management; MSc. total lectures: 30 h. Industrial Engineering & Management; MSc (Mestrado integrado) Universidade de Aveiro, Portugal
2017/09/01 - 2018/08/31 Co-responsible for the Course: Production technologies under the Industrial Engineering & Management; MSc. total lectures: 30 h. Industrial Engineering & Management; MSc (Mestrado integrado) Universidade de Aveiro, Portugal
2016/09/01 - 2017/08/31 Co-responsible for the Course: Production technologies under the Industrial Engineering & Management; MSc. Industrial Engineering & Management; MSc (Mestrado integrado) Universidade de Aveiro, Portugal

Entrevista (jornal / revista)

Descrição da atividade Jornal / Forum
2020/03/25 Portugal pops a cork to the regeneration of a formerly ailing industry – and to its sustainable future Equal Times
2020/02/20 Nada se desperdiça e tudo se transforma na cortiça (Using cork in novel applications) Diário de Notícias
2020/01/30 Como se constrói de forma sustentável Revista Visão (nº 1404, pag 78-79)
2019/03/30 Lamas vermelhas podem, afinal, despoluir águas tóxicas Notícias de Aveiro
2019/03/29 Cientistas transformam em Aveiro lamas vermelhas em esferas para despoluir água (Scientists in Aveiro transform red mud into spheres that can deppolute waters) RTP Notícias (29 Março 2019)
2019/03/29 Cientistas portugueses transformam resíduos poluentes em esferas para limpar água TVI24 notícias
2019/03/29 Cientistas transformam em Aveiro lamas vermelhas em esferas para despoluir água Diário de Notícias
2019/03/13 Fazer das cinzas cimento? Investigadores da Universidade de Aveiro criam eco-cimento (Development of an eco-cement (geopolymer) using industrial wastes) Público
2019/03/12 Aveiro inventa (provavelmente) o cimento mais ecológico do mundo (Development of an eco-cement (geopolymer) using industrial wastes) Jornal de Negócios
2019/03 Cientistas da UA descobrem que lamas vermelhas podem despoluir águas Journal da Economia do Mar
2018/07/31 Ecoceramics to produce energy using cork as template Renováveis Magazine
2018/07/27 Ecocerâmicas produzem combustíveis renováveis a partir da cortiça Diário de Aveiro
2018/07/27 Ecoceramics to produce energy using cork as template Radio Terra Nova
2015/10 Novel energy saving ceramic tiles Revista Recicla– Sociedade Ponto Verde, nº21 (Outubro, Novembro e Dezembro) 2015, pág. 8 e 9: Passos sustentáveis.

Entrevista / Programa (rádio / tv)

Programa Tema
2019/09/10 - 2019/09/10 TVI – Jornal das 8 Development of an eco-cement (geopolymer) using industrial wastes
2019/06/22 - 2019/06/22 RTP1 – Jornal da Tarde Development of an eco-cement (geopolymer) using industrial wastes
2016/05/16 - 2019/05/16 RDP Internacional – Portugal com ideias Development of an eco-cement (geopolymer) using industrial wastes
2019/04/24 - 2019/04/24 Porto Canal – Mentes que Brilham Development of an eco-cement (geopolymer) using industrial wastes
2019/03/13 - 2019/03/13 TSF – Tarde TSF Development of an eco-cement (geopolymer) using industrial wastes
2016/05/10 - 2016/05/10 Antena 1 - Click Waste glass from end-of-life fluorescent lamps to produce geopolymers
2016/03/10 - 2016/03/10 RTP 1 - Minuto Verde Novel energy saving ceramic tiles
2016/02/01 - 2016/02/01 Antena 1 – Click Investigadores criam cerâmico para cozinhar alimentos em placas de indução

Outro júri / avaliação

Descrição da atividade Instituição / Organização
2019/01/01 - 2019/07/31 Main arguer of the student João Gomes Couto , his work : "Termoformação em transformação de compósitos de cortiça", under the discipline "Industrial project" belonging to the MSc degree in Material Science and Engineering (University of Aveiro) Universidade de Aveiro, Portugal

Tutoria

Tópico Nome do aluno
2020/01/01 - Atual Avaliação do potencial ligante de escórias de fundição de ferro na preparação de eco-cimentos Naír Cálão
2020/01/01 - Atual Utilização de grits provenientes da indústria da celulose como agregados para a preparação de argamassas-cola ecológicas Diogo Junqueira
2018 - 2019 Developing light but strong porcelain João Cunha
2018 - 2019 Technical porcelain for dental applications Fábio Ye Lin
2018 - 2019 Using aluminium anodizing sludge and sulphate sources to activate industrial mortars Jorge Gabriel Marques Silva
2016 - 2017 Synthesis of functional geopolymers for wastewater treatment Andreia Ribeiro
2016 - 2017 Developing geopolymers for thermal insulating applications Nuno Ferreira
2015 - 2016 developing low thermal conductivity geopolymers Vanderlei Felizardo
Distinções

Prémio

2019 Top 1% Peer Reviewer 2019 award (Powered by Publons)
Clarivate Analytics UK Limited, Reino Unido

Outra distinção

2019 2nd place in the National Wiki Science Competition for Portugal, in the microscopy section
National Wiki Science Competition, Portugal
2018 Winner of “Materials Today Cover Competition 2018” for an image of red mud inorganic polymer spheres. https://www.materialstoday.com/materials-today-cover-competition-2018/
2016 Grant for attending the workshop: “From waste to resource: Sustainable waste management – Enhancing the use of secondary raw materials”
2016 Winner of “Materials Today Cover Competition 2016” for an image of cork-derived ecocemarins. https://www.materialstoday.com/materials-today-cover-competition-2016/
2015 Honourable Mention (Poster). From the lab to the industry
CICECO - Aveiro Institute of Materials, Portugal
2015 Honourable Mention for Innovation - TEKTÓNICA 2015 (International Building and Construction Fair)
International Building and COnstruction Fair (TEKTÓNICA 2015), Portugal
2011 Best Oral Communication 2011 award (Engineering Week 2011)
Universidade do Minho, Portugal