???global.info.a_carregar???
Mitchell, Geoffrey Robert. Completed the Mestrado in Master of Science in 1979/11/28 by London Guildhall University, Doctor of Philosophy in Doctor of Philosophy in 1983/06/01 by University of Cambridge and the Council for National Academic Awards (CNAA). He is a Fellow of the Institute of Physics (UK) and the a Fellow of the Royal Society of Chemistry (UK) underlining his multidisciplinary approach to science. He was Professor of Polymer Science at the University of Reading UK and the founding director of the Polymer Science Centre and founding director of the Centre for Advanced Microscopy and Emeritus Professor at the Reading. He was Organic Unit Sub-director in Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto (2014-2022). Published 473 outputs including 273 articles in journals. These papers have been cited over 7,500 times. He Has presented numerous Plenary Lectures in the 5 continents of the world. HE IS Listed in the Meta-Research Innovation Center at Stanford of the top 10,000 scientists globally and noted for his work in polymer science. He has authored 48 chapters of books and 15 books. Has 9 patent(s) registered. He is an Editorial Board member of two Q1 journal "Polymers" and "Journal of Manufacturing and Materials Processes". He is an Associate Editor of "Applied Sciences" and of "Frontiers Mechanical Engineering" and "Frontiers in Material Science". He is a member of the editorial boards of a nuber of emerging journals including "Eng" and "Exploration of BioMat-X". He has organized over 50 events and participated in ~ 100 events. He has supervised 60+ PhD theses and co-supervised 5. He has Supervised 30+ MSc dissertation(s). He has received 19 awards and honours. Participates and/or participated as Principal investigator in 39 project(s), Research Fellow in 2 project(s) and Researcher in 4 project(s). He works in the areas of Engineering and Technology with emphasis on Materials Engineering. He has pioneered the in-situ study of polymer processing and the close coupling of molecular simulation with the analysis of X-ray and neutron scattering. He pioneered the preparation of liquid crystal polymers and the development of photo-assisted poling on polymers for non-linear optical properties. He is an international expert of the use of x-ray and neutron scattering in the study of polymers. He is a strong advocate of outreach activities and taking science to schools and societies. In his professional activities he has interacted with 386 collaborators through co-authorship of scientific papers. In his Ciência Vitae the most frequent terms in the context of scientific, technological and artistic-cultural output are: MANUFACTURING; INDUSTRY 4.0; DIRECT DIGITAL MANUFACTURING; 3D PRINTING; MATERIALS; POLYMERS; SUSTAINABILITY; BIOPOLYMERS; CLIMATE CHANGE; MEDICAL IMAGING: MEDICAL SCIENCE; MEDICAL PHYSICS; MATERIALS SCIENCE; MATERIALS PHYSICS; POLYMER SCIENCE; POLYMER PROCESSING; POLYMER ENGINEERING; materials; waste; circular economy; polymer physics; polymer chemistry; polymer science; polymer processing; simulations; polymer testing; optics; materials science; materials chemistry; drug delivery; nanotechnology; pharamceutical Science; food packaging; Tissue Engineering; Direct Digital manufacturing; direct digital manufacturing; Industry 4.0; safety; glass science; ceramics; .
Identificação

Identificação pessoal

Nome completo
Geoffrey Robert Mitchell

Nomes de citação

  • Geoffrey Robert, Mitchell

Identificadores de autor

Ciência ID
E41A-ABDD-1FC7
ORCID iD
0000-0001-7977-7610

Telefones

Telemóvel
  • (+351) 962426925 (Profissional)

Domínios de atuação

  • Ciências Agrárias
  • Ciências da Engenharia e Tecnologias - Engenharia dos Materiais

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Inglês (Idioma materno)
Português Utilizador elementar (A2) Utilizador elementar (A2) Utilizador elementar (A2) Utilizador elementar (A1) Utilizador elementar (A2)
Francês Utilizador elementar (A1) Utilizador independente (B1) Utilizador elementar (A2) Utilizador elementar (A2) Utilizador elementar (A2)
Formação
Grau Classificação
1979/01/04 - 1983/06/01
Concluído
Doctor of Philosophy (Doctor of Philosophy)
University of Cambridge, Reino Unido

Council for National Academic Awards (CNAA), Reino Unido
"Chain Conformation and packing in non-crystalline polymers: an X-ray approach" (TESE/DISSERTAÇÃO)
UK Phds NOT Classified
1977/10/01 - 1979/11/28
Concluído
Master of Science (Mestrado)
Especialização em Physical Research Techniques
London Guildhall University, Reino Unido
"Crystal Structure of 1,2 Bis(isopropylamino)anthraquinone" (TESE/DISSERTAÇÃO)
Pass
Percurso profissional

Ciência

Categoria Profissional
Instituição de acolhimento
Empregador
2024/02/14 - Atual Investigador (Investigação) Visionary Equation Unipessoal LDA, Portugal
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
1983/10/01 - 1984/04/30 Investigador (Investigação) Hokkaido Daigaku, Japão
1977/04/01 - 1983/09/30 Assistente de Investigação (carreira) (Investigação) University of Cambridge Department of Materials Science and Metallurgy, Reino Unido

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento
Empregador
1984/04/01 - 2010/07/31 Professor Catedrático (Docente Universitário) University of Reading, Reino Unido

Cargos e Funções

Categoria Profissional
Instituição de acolhimento
Empregador
2007/05/17 - 2019/02/01 Subdirector de Unidade Orgânica Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Outros

Categoria Profissional
Instituição de acolhimento
Empregador
2019/02/01 - 2024/02/13 Coordinator Investigator Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Instituto Politécnico de Leiria, Portugal
2010/02/01 - 2010/02/01 Invited Reseasrcher Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Instituto Politécnico de Leiria, Portugal
Projetos

Bolsa

Designação Financiadores
2022/01 - Atual PREDICTOS: Strengthening excellence for advanced osteosarcoma's predictive models | https://predictos.ipleiria.pt/
101079372
Horizon Europe
Em curso
2022/05/01 - 2022/12/31 3DPMTP - Changing the design paradigm - 3d printing on molecular texture in plastics, (MIT-EXPL/TDI/0044/2021)
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia

Massachusetts Institute of Technology MIT Portugal Program
Em curso
2013/01 - 2015/12 Multi-material laser sintering for the production of Functional Graded Structures Fundação para a Ciência e a Tecnologia, I.P.
2010/04 - 2013/09 RapidPRE-Rapid Prototyping by Reactive Extrusion: A New concept for rapid manufacturing process Fundação para a Ciência e a Tecnologia, I.P.
2010/04 - 2013/09 Bio-PU:Effective and reliable routes to the fabrication of devices for medical applications through reaction manufacturing processes Fundação para a Ciência e a Tecnologia, I.P.
2010/04 - 2013/06 Multimaterial microstereo-thermal-lithography (μSTLG) Fundação para a Ciência e a Tecnologia, I.P.
2006/07 - 2010/03 PPE:Fantastic Plastic - or how to make your first million Engineering and Physical Sciences Research Council

Projeto

Designação Financiadores
2017 - 2029 I FILM
POCI-01-0247-FEDER-017921
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Concluído
2023/03/01 - 2026/02/28 Optimised additive biomanufacturing system to produce hierarchical multi-tissue scaffolds for the treatment of joint diseases
2022.10564.PTDC
Instituto Politécnico de Leiria, Portugal

Universidade do Porto Instituto de Ciências Biomédicas Abel Salazar, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2021/01/01 - 2025/12/31 Produção Avançada e Sistemas Inteligentes
LA/P/0112/2020
Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2020/01/01 - 2023/12/31 Centre for Rapid and Sustainable Product Development
UIDB/04044/2020
Co-Investigador Responsável (Co-IR)
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2022/01/01 - 2023/03/31 Changing the design paradigm - 3d printing on molecular texture in plastics
MIT-EXPL/TDI/0044/2021
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2018/07/26 - 2022/07/25 Components for unmanned aerial vehicles UAVs produced by additive manufacturing
PTDC/EME-ESP/31296/2017
Universidade da Beira Interior, Portugal

Instituto Politécnico de Leiria, Portugal

Universidade de Coimbra, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2020 - 2022 FLY.PT
POCI-01-0247-FEDER-046079
Investigador responsável
Instituto Politécnico de Leiria Centro de Investigação em Gestão para a Sustentabilidade, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Em curso
2020 - 2022 S4PLAST
POCI-01-0247-FEDER-046089
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Em curso
2020 - 2022 S4PLAST
POCI-01-0247-FEDER-046089
Investigador responsável
Comissão de Coordenação e Desenvolvimento Regional do Centro
2019 - 2022 Neptune Controller
POCI-01-0247-FEDER-039827
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Em curso
2019 - 2022 ACE
POCI-01-0247-FEDER-039863
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Em curso
2019 - 2022 DDM4Glass
POCI-01-0247-FEDER-039823
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Em curso
2019 - 2022 Add.Powder
CENTRO-01-0247-FEDER-039910
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Em curso
2019 - 2022 Add.Powder
CENTRO-01-0247-FEDER-039910
Comissão de Coordenação e Desenvolvimento Regional do Centro
2018/01/01 - 2021/12/31 CircularSeas
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Em curso
2018/10/28 - 2021/10/17 Tailored Cooling
POCI-01-0145-FEDER-032436
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia, I.P.
Em curso
2018/10/18 - 2021/10/17 Add rapid hot&cooling strategies to additive and subtractive manufacturing of ultra efficient metallic inserts for injection moulding of high quality tailored thermoplastic parts
PTDC/EME-EME/32436/2017
Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2018/10/01 - 2021/09/30 Wood Shape
POCI-01-0247-FEDER-033348
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Em curso
2018/10 - 2021/09 Wood Shape
POCI-01-0247-FEDER-033348
Comissão de Coordenação e Desenvolvimento Regional do Centro
2018/09/01 - 2021/08/31 4d Composites
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Em curso
2018/01/09 - 2021/08/31 MorphingTECH
POCI-01-0247-FEDER-033408
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Em curso
2018/07/26 - 2021/07/25 ACE
PTDC/EME-ESP/31296/2017
Investigador
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia, I.P.
Em curso
2018 - 2021 PrintBIG
POCI-01-0247-FEDER-033503
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Em curso
2018 - 2021 TOOLING4G
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Em curso
2019 - 2020 Transform Tyres2Value
CENTRO-01-0247-FEDER-038495
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Concluído
2019 - 2020 Safety4Road
CENTRO-01-0247-FEDER-038326
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Concluído
2019 - 2020 Safety4Road
CENTRO-01-0247-FEDER-038326
Comissão de Coordenação e Desenvolvimento Regional do Centro
2017 - 2020 PAMI PORTUGUESE Additive manufacturing Initiative
Investigador
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia, I.P.
Concluído
2016 - 2020 Multi-Path.H2O
POCI-01-0247-FEDER-017684
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Concluído
2016 - 2020 Multi-Path.H2O
POCI-01-0247-FEDER-017684
Comissão de Coordenação e Desenvolvimento Regional do Centro
2019/01/01 - 2019/12/31 Centro para o Desenvolvimento Rápido e Sustentado de Produto
UID/Multi/04044/2019
Instituto Politécnico de Leiria, Portugal

Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2017/01/01 - 2019/12/31 Green thermosets
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia, I.P.
Concluído
2017/01/01 - 2019/12/31 Green thermosets: Nanocomposites of Rosin/Maghnite
PT-DZ/0001/2015
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2015/01/01 - 2019/12/31 Water Shape
3383
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Concluído
2015/01/01 - 2019/12/31 IMMOULD LABEL
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Concluído
2016/01/01 - 2019/12/30 Water Shape, Water Assisted Injection Moulding
POCI-01-0247-FEDER
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia, I.P.
Concluído
2015/01 - 2019/12 IMMOULD LABEL Comissão de Coordenação e Desenvolvimento Regional do Centro
2017/09/01 - 2019/09/30 Integrated intervention program for prevention and treatment of cartilage lesions
SAICT-POL/23423/2016
Instituto Politécnico de Leiria, Portugal

Instituto Politécnico de Coimbra, Portugal

Instituto Politécnico de Santarém, Portugal

Centro Hospitalar Leiria EPE, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2017/09/15 - 2019/09/17 CBmeter- a new medical device for screening metabolic diseases
SAICT-POL/23278/2016
Instituto Politécnico de Leiria, Portugal

Instituto Politécnico de Leiria, Portugal

Instituto Politécnico de Castelo Branco, Portugal

Centro Hospitalar Leiria EPE, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2016/04/01 - 2019/04/01 BioMaTE - A novel bio-manufacturing system to produce bioactive scaffolds for tissue engineering
PTDC/EMS-SIS/7032/2014
Instituto Politécnico de Leiria, Portugal

Universidade do Porto Instituto de Ciências e Tecnologias Agrárias e Agro-Alimentares, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2017 - 2019 4Additive
POCI-01-0247-FEDER-021944
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Concluído
2017 - 2019 4Additive
POCI-01-0247-FEDER-021944
Comissão de Coordenação e Desenvolvimento Regional do Centro
2016 - 2019 Addi Space
SOE1/P1/F0011
Bolseiro de Investigação
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia, I.P.
Concluído
2016 - 2019 direct.ceramics
POCI-01-0247-FEDER-017994
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Concluído
2016/01/01 - 2018/12/31 UC4EP Understanding Crystallisation for Enhanced properties
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia, I.P.
Concluído
2016/04/02 - 2018/10/02 UC4EP Understanding Crystallisation for Enhanced Polymer Properties
PTDC/CTM-POL/7133/2014
Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2013 - 2017 Hydrozones
FP7-NMP-2012-Large6
Investigador
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
European Commission Seventh Framework Programme for Research and Technological Development Science in Society
Concluído
2013/01/01 - 2015/12/31 Multi-material laser sintering for the production of Functional Graded Structures
EXCL/EMS-TEC/0460/2012
Universidade do Minho, Portugal

Instituto Politécnico de Leiria, Portugal

Universidade de Lisboa Faculdade de Medicina Dentária, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2011/09/01 - 2015/02/28 C-Parts
FCOMP-01-0202-FEDER-021568
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Concluído
2013 - 2015 GRadsint
FCOMP-01-0124-FEDER-027431
Bolseiro de Investigação
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia, I.P.
Concluído
2010/01/01 - 2013/12/31 Bio PU
PTDC/EME-TME/104713/2008
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia, I.P.
Concluído
2010/01/01 - 2013/12/31 Tooling Edge
QREN IDTMOB
Investigador
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Comissão de Coordenação e Desenvolvimento Regional do Centro
Concluído
2010/01 - 2013/12 Tooling Edge
QREN IDTMOB
Comissão de Coordenação e Desenvolvimento Regional do Centro
2010/04/01 - 2013/09/30 Bio-PU:Effective and reliable routes to the fabrication of devices for medical applications through reaction manufacturing processes
PTDC/EME-TME/104730/2008
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2010/04/01 - 2013/09/30 RapidPRE-Rapid Prototyping by Reactive Extrusion: A New concept for rapid manufacturing process
PTDC/EME-TME/104178/2008
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal

Universidade de Aveiro, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2010/04/01 - 2013/06/30 Multimaterial microstereo-thermal-lithography μSTLG
PTDC/EME-PME/098037/2008
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Instituto Politécnico de Leiria, Portugal

Universidade do Minho, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2011/01/01 - 2012/12/31 Projecto Estratégico - UI 4044 - 2011-2012
PEst-OE/EME/UI4044/2011
Instituto Politécnico de Leiria, Portugal

Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Fundação para a Ciência e a Tecnologia
Concluído

Outro

Designação Financiadores
2020/01/01 - Atual Polymers at ALBA
DOI 10.54499/UIB/04044/2020
/UIB/04044/2020
Co-Investigador Responsável (Co-IR)
Em curso
2018/01/01 - 2030/12/31 IMAGING A BETTER FUTURE
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Em curso
2023/01/01 - 2024/12/31 Optimising moulding to deliver an effective circular economy for injection moulded parts for the medical industry
Co-Investigador Responsável (Co-IR)
Instituto Politécnico de Leiria, Portugal
ALBA Synchrotron Light Source
Em curso
2023/01/01 - 2024/12/31 Optimising moulding to deliver an effective circular economy for injection moulded parts for the medical industry
Co-Investigador Responsável (Co-IR)
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
ALBA Synchrotron Light Source
Em curso
2023/01/01 - 2024/01/01 In-situ SAXS study on the influence of shear on the nucleation efficiency of biobased polyester crystallization in injection moulding
Co-Investigador Responsável (Co-IR)
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
ALBA Synchrotron Light Source
Em curso
2022/01/01 - 2023/12/31 Optimising the development of structure and morphology during injection moulding using in-situ measurements
Co-Investigador Responsável (Co-IR)
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
ALBA Synchrotron Light Source
Concluído
2023/01/01 - 2023/01/01 A new approach to recycling plastics using operando saxs measurements during injection moulding
Co-Investigador Responsável (Co-IR)
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
ALBA Synchrotron Light Source
Concluído
2016/06/01 - 2021/06/01 ENHANCING POLYMER PROCESSING USING INSITU EVALUATION AT THE ALBA SYNCHROTRON LIGHT SOURCE
2018093011
2018093021
2018093040
2019023420
2019023494
2019023500
2019093813
2019093880
2019093949
2019093952
201909396
2020024087
2019093952-2
Investigador responsável
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
ALBA -CELLS
Em curso
Produções

Publicações

Artigo em conferência
  1. Matias, João; Geoffrey Robert, Mitchell; Anabela P. Massano. "Operando x-ray scattering studies of Biaxial Deformation of Natural Rubber". Trabalho apresentado em 3rd International Conference on Polymer Process Innovation, Guimarães, 2023.
    Publicado
  2. Matias, João; Geoffrey Robert, Mitchell; Carreira, P.. "Operando small-angle X-ray scattering studies of injection moulding of polymers, a step closer to a multi-scale digital twin". Trabalho apresentado em 3rd International Conference on Polymer Process Innovation, Guimarães, 2023.
  3. Daniel P. da Silva; Barbara Lamolinara; André Costa; Fábio Gameiro; Paula Pascoal-Faria; Artur Mateus; Juan Carlos Martinez; et al. "Measuring In-Situ X-ray Scattering of Natural Rubber Biaxial Deformation: A New Equipment for Polymer Studies". 2022.
    10.3390/materproc2022008136
  4. Sarah Reeves; Fred Davis; Geoffrey Mitchell. "Ferronematic Liquid Crystal Polymers and Elastomers". 2022.
    10.3390/materproc2022008135
  5. Daniel Silva; João Pinheiro; Saba Abdulghani; Christina S Kamma-Lorger; Eduardo Solano; Juan Carlos Martinez; Paula Pascoal-Faria; Artur Mateus; Geoffrey R Mitchell. "Controlling Morphological Development during Additive Manufacturing: A Route to the Mapping of Properties". 2022.
    10.3390/materproc2022008116
  6. Sara Silva; Ana Rita Fonseca; Geoffrey Mitchell. "Optimization of a New Material with Clay and Waste Coffee Grounds for Additive Manufacturing". 2022.
    10.3390/materproc2022008069
  7. Andre Costa; Fabio Gameiro; Artur Potencio; Daniel Silva; Pedro Carreira; Juan Carlos Martinez; Paula Pascoal-Faria; Artur Mateus; Geoffrey R. Mitchell. "In Situ Time-Resolving Small-Angle X-ray Scattering Study of the Injection Moulding of Isotactic Polypropylene Parts". 2022.
    10.3390/materproc2022008030
  8. Pascoal-Faria, P.; Alves, N.; Kamma-Lorger, C.S.; Marques, R.; Gomes, M.; Venkat, A.; Silva, R.; et al. "Multi-scale computer simulations of multi-tubular components manufactured by water-assisted injection moulding". 2019.
    10.1063/1.5114228
  9. Pinheiro, J.; Abdulghani, S.; Pascoal-Faria, P.; Sousa, D.; Carreira, P.; Viana, T.; Kamma-Lorger, C.S.; Mitchell, G.. "Tools to define and evaluate morphology mapping, a route to complex structures using direct digital manufacturing". 2019.
    10.1063/1.5114229
  10. Saba Abdhulghani; Geoffrey Robert, Mitchell; Thomas Malho; João Pinheiro; Paula Pascoal-Faria; NUNO ALVES; Christina S. Kamma-Lorger. "The use of time-resolved small-angle x-ray scattering techniques to evaluate the molecular organisation changes in 3d printed TPU". Trabalho apresentado em 7th ENURS, 2018.
    Publicado
  11. Geoffrey Robert, Mitchell; João Pinheiro; Pascoal-Faria, Paula; Dora Sousa; Saba Abdulghani; Tânia F. Viana; Pedro Carreira; et al. "The use of time-resolved in-situ smallangle x-ray scattering techniques to evaluate the molecular organisation changes which accompany 3d printing of polymers". Trabalho apresentado em 7th ENURS, 2018.
    Publicado
  12. Nazhipkyzy, M.; Mohan, S.D.; Davis, F.J.; Mitchell, G.R.. "Carbon nanotubes in electrospun polyethylene oxide nanofibres: A potential route to conducting nanofibres". 2015.
    10.1088/1742-6596/646/1/012007
  13. Vieira, A.P.; Bartolo, H.; Mitchell, G.R.; Bartolo, P.. "Phase change materials as a tool for climate change mitigation". 2014.
  14. Mitchell, G.R.; Davis, F.J.. "Direct writing of conductive polymer tracks as part of an additive manufacturing process". 2014.
  15. Tojeira, A.; Biscaia, S.; Viana, T.; Bártolo, P.J.; Mitchell, G.R.. "Structure development during additive manufacturing". 2014.
  16. Mitchell, G.R.; Saengxuwan, S.; Bualek-Limcharoen, S.. "Quantitative orientation measurement in multiple component polymer systems using waxs". 2002.
  17. Gkourmpis, T.; Mitchell, G.R.. "Understanding the broad Q scattering from miscible polymer blends". 2002.
  18. Nogules, A.; Mitchell, G.R.; Pukanszky, B.; Turcsanyi, B.. "Diffraction information from low concentrated components in multicomponent polymer systems". 2002.
Artigo em revista
  1. Costa, André A.; Gameiro, Fábio; Massano, Anabela P.; Arioli, Matteo; da Silva, Daniel P.; Carreira, Pedro; Martínez, Juan Carlos; et al. "Industrially relevant injection moulding apparatus for in situ time-resolving small-angle X-ray scattering measurements". The International Journal of Advanced Manufacturing Technology (2024): http://dx.doi.org/10.1007/s00170-024-13651-3.
    Publicado • 10.1007/s00170-024-13651-3
  2. Matteo Arioli; Anabela Paiva Massano; Daniel P. da Silva; Fábio A. Gameiro; Pedro Carreira; Marc Malfois; João Matias; et al. "Time and Spatially Resolved Operando Small-Angle X-ray Scattering Measurements during Injection Moulding of Plastics". Journal of Manufacturing and Materials Processing (2023): https://doi.org/10.3390/jmmp7050176.
    10.3390/jmmp7050176
  3. Chauhan, A.; Patel, M.K.; Chaudhary, S.; Nayak, M.K.; Saini, S.S.; Pullammanappallil, P.; Manivannan, N.; Mitchell, G.R.; Balachandran, W.. "Efficacy evaluation of an air-assisted electrostatic disinfection device for the effective disinfection and sanitization against the spread of pathogenic infections". Journal of Electrostatics 123 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85152598504&partnerID=MN8TOARS.
    10.1016/j.elstat.2023.103807
  4. Hodhaifa Derdar; Geoffrey Robert Mitchell; Artur Mateus; Sarra Chaibedraa; Zinelabidine Otmane Elabed; Vidhura Subash Mahendra; Zakaria Cherifi; et al. "Green Copolymers and Nanocomposites from Myrcene and Limonene Using Algerian Nano-Clay as Nano-Reinforcing Filler". Polymers (2022): https://doi.org/10.3390/polym14235271.
    10.3390/polym14235271
  5. André A. Costa; Fábio Gameiro; Artur Potêncio; Daniel P. da Silva; Pedro Carreira; Juan Carlos Martinez; Paula Pascoal-Faria; Artur Mateus; Geoffrey R. Mitchell. "Evaluating the Injection Moulding of Plastic Parts Using In Situ Time-Resolved Small-Angle X-ray Scattering Techniques". Polymers (2022): https://doi.org/10.3390/polym14214745.
    10.3390/polym14214745
  6. Hodhaifa Derdar; Geoffey Robert Mitchell; Sarra Chaibedraa; Vidhura Subash Mahendra; Zakaria Cherifi; Khaldoun Bachari; Redouane Chebout; et al. "Synthesis and Characterization of Copolymers and Nanocomposites from Limonene, Styrene and Organomodified-Clay Using Ultrasonic Assisted Method". Polymers (2022): https://doi.org/10.3390/polym14142820.
    10.3390/polym14142820
  7. Sara Biscaia; João C. Silva; Carla Moura; Tânia Viana; Ana Tojeira; Geoffrey R. Mitchell; Paula Pascoal-Faria; Frederico Castelo Ferreira; Nuno Alves. "Additive Manufactured Poly(e-caprolactone)-graphene Scaffolds: Lamellar Crystal Orientation, Mechanical Properties and Biological Performance". Polymers 14 9 (2022): 1669-1669. https://doi.org/10.3390/polym14091669.
    10.3390/polym14091669
  8. Daniel P. da Silva; João Pinheiro; Saba Abdulghani; Christina Kamma Lorger; Juan Carlos Martinez; Eduardo Solano; Artur Mateus; Paula Pascoal-Faria; Geoffrey R. Mitchell. "Changing the Paradigm-Controlling Polymer Morphology during 3D Printing Defines Properties". Polymers 14 9 (2022): 1638-1638. https://doi.org/10.3390/polym14091638.
    10.3390/polym14091638
  9. Ana Augusto; Andreia Miranda; Daniel Crespo; Maria J. Campos; Délio Raimundo; Rui Pedrosa; Geoffrey Mitchell; Keshavan Niranjan; Susana F.J. Silva. "Preservation of fresh-cut Rocha Pear using Codium tomentosum extract". LWT 155 (2022): 112938-112938. https://doi.org/10.1016/j.lwt.2021.112938.
    10.1016/j.lwt.2021.112938
  10. Manoj Kumar Patel; Ankit Khanchi; Aarti Chauhan; Anup Kumar; Siva Rama Krishna Akkireddi; Anil Jangra; Rajesh Kanawade; Nadarajah Manivannan; Geoffrey Robert Mitchell. "Real-time measurement of droplet size and its distribution of an air-induced air-assisted electrostatic nozzle". Journal of Electrostatics 115 (2022): 103665-103665. https://doi.org/10.1016/j.elstat.2021.103665.
    10.1016/j.elstat.2021.103665
  11. Augusto, Ana; Miranda, Andreia; Crespo, Daniel; Campos, Maria J.; Raimundo, Délio; Pedrosa, Rui; Mitchell, Geoffrey; Niranjan, Keshavan; Silva, Susana F.J.. "Preservation of fresh-cut Rocha Pear using Codium tomentosum extract". (2022): http://dx.doi.org/10.1016/j.lwt.2021.112938.
  12. Augusto, A.; Simões, T.; Novais, S.C.; Mitchell, G.; Lemos, M.F.L.; Niranjan, K.; Silva, S.F.J.. "An insight into the mechanisms underpinning the anti-browning effect of Codium tomentosum on fresh-cut apples". Food Research International 161 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85137052955&partnerID=MN8TOARS.
    10.1016/j.foodres.2022.111884
  13. Augusto, A.; Miranda, A.; Costa, L.; Pinheiro, J.; Campos, M.J.; Raimundo, D.; Pedrosa, R.; et al. "A pilot plant scale testing of the application of seaweed-based natural coating and modified atmosphere packaging for shelf-life extension of fresh-cut apple". Journal of Food Processing and Preservation 46 7 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85128206389&partnerID=MN8TOARS.
    10.1111/jfpp.16630
  14. Raluca P. Dumitriu; Elena Stoleru; Geoffrey R. Mitchell; Cornelia Vasile; Mihai Brebu. "Bioactive Electrospun Fibers of Poly(e-Caprolactone) Incorporating a-Tocopherol for Food Packaging Applications". Molecules 26 18 (2021): 5498-5498. https://doi.org/10.3390/molecules26185498.
    10.3390/molecules26185498
  15. Luciano De Sio; Bin Ding; Monica Focsan; Karin Kogermann; Paula Pascoal-Faria; Francesca Petronela; Geoffrey Mitchell; Eyal Zussman; Filippo Pierini. "Frontispiece: Personalized Reusable Face Masks with Smart Nano-Assisted Destruction of Pathogens for COVID-19: A Visionary Road". Chemistry – A European Journal 27 20 (2021): https://doi.org/10.1002/chem.202182061.
    10.1002/chem.202182061
  16. Luciano De Sio; Bin Ding; Monica Focsan; Karin Kogermann; Paula Pascoal-Faria; Francesca Petronela; Geoffrey Mitchell; Eyal Zussman; Filippo Pierini. "Personalized Reusable Face Masks with Smart Nano-Assisted Destruction of Pathogens for COVID-19: A Visionary Road". Chemistry – A European Journal 27 1 (2021): 1-27. https://doi.org/10.1002/chem.202004875.
    Publicado • 10.1002/chem.202004875
  17. Auriemma, F.; Ruiz de Ballesteros, O.; Giusto, G.; Di Girolamo, R.; Malafronte, A.; Scoti, M.; De Rosa, C.; Mitchell, G.R.. "Time-resolving small angle X-Ray scattering analysis of melt crystallization of mixtures of regular and irregular isotactic polypropylene samples". Polymer 215 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85099513135&partnerID=MN8TOARS.
    10.1016/j.polymer.2021.123411
  18. Hodhaifa Derdar; Meghabar, R.; Benachour, M.; Mitchell, G.R.; Bachari, K.; Belbachir, M.; Cherifi, Z.; Baghdadli, M.C.; Harrane, A.. "Polymer-Clay Nanocomposites: Exfoliation and Intercalation of Organophilic Montmorillonite Nanofillers in Styrene–Limonene Copolymer". Polymer Science - Series A 63 5 (2021): 568-575. http://www.scopus.com/inward/record.url?eid=2-s2.0-85113407398&partnerID=MN8TOARS.
    10.1134/S0965545X21050023
  19. Geoffrey Robert, Mitchell. "Ultrasound assisted green synthesis of a-hydroxyphosphonates under solvent-free conditions". 15 3 (2020): 798-807. https://ejournal2.undip.ac.id/index.php/bcrec/article/view/9185.
    Acesso aberto • Publicado
  20. Thomas Gkourmpis; Geoffrey Mitchell. "The Use of Scattering Data in the Study of the Molecular Organisation of Polymers in the Non-Crystalline State". Polymers (2020): https://www.mdpi.com/2073-4360/12/12/2917.
    10.3390/polym12122917
  21. Hodhaifa Derdar; Geoffrey Robert Mitchell; Vidhura Subash Mahendra; Mohamed Benachour; Sara Haoue; Zakaria Cherifi; Khaldoun Bachari; Amine Harrane; Rachid Meghabar. "Green Nanocomposites from Rosin-Limonene Copolymer and Algerian Clay". Polymers (2020): https://doi.org/10.3390/polym12091971.
    10.3390/polym12091971
  22. H.G. Premakshi; Mahadevappa Y. Kariduraganavar; Geoffrey R. Mitchell. "Crosslinked Nanocomposite Sodium Alginate-Based Membranes with Titanium Dioxide for the Dehydration of Isopropanol by Pervaporation". Molecules 25 6 (2020): 1298-1298. https://doi.org/10.3390/molecules25061298.
    10.3390/molecules25061298
  23. Derdar, H.; Mitchell, G.R.; Cherifi, Z.; Belbachir, M.; Benachour, M.; Meghabar, R.; Bachari, K.; Harrane, A.. "Ultrasound assisted synthesis of polylimonene and organomodified-clay nanocomposites: A structural, morphological and thermal properties". Bulletin of Chemical Reaction Engineering & Catalysis 15 3 (2020): 798-807. http://www.scopus.com/inward/record.url?eid=2-s2.0-85098685962&partnerID=MN8TOARS.
    10.9767/BCREC.15.3.9185.798-807
  24. Pattanashetti, N.A.; Viana, T.; Alves, N.; Mitchell, G.R.; Kariduraganavar, M.Y.. "Development of novel 3D scaffolds using BioExtruder by varying the content of hydroxyapatite and silica in PCL matrix for bone tissue engineering". Journal of Polymer Research 27 4 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85081130891&partnerID=MN8TOARS.
    10.1007/s10965-020-02053-0
  25. Saba Abdulghani; Geoffrey Mitchell. "Biomaterials for In Situ Tissue Regeneration: A Review". Biomolecules 9 11 (2019): 750. https://www.mdpi.com/2218-273X/9/11/750.
    Acesso aberto • Publicado • 10.3390/biom9110750
  26. Zaoui, Aniss; Mahendra, Vidhura; Mitchell, Geoffrey; Cherifi, Zakaria; Harrane, Amine; Belbachir, Mohammed. "Design, Synthesis and Thermo-chemical Properties of Rosin Vinyl Imidazolium Based Compounds as Potential Advanced Biocompatible Materials". Waste and Biomass Valorization 11 7 (2019): 3723-3730. http://dx.doi.org/10.1007/s12649-019-00691-0.
    Publicado • 10.1007/s12649-019-00691-0
  27. Geoffrey Robert, Mitchell. "Adaptive Platforms and Flexible Deposition System for Big Area Additive Manufacturing (BAAM)". Applied Mechanics and Materials (2019): http://dx.doi.org/10.4028/www.scientific.net/amm.890.3.
    10.4028/www.scientific.net/amm.890.3
  28. Geoffrey Robert, Mitchell. "Microwave Treatment of Polyacrylonitrile Powder Method Development and Effects of Surface Modification Porosity for Supercapacitor Devices or other Mobile Applications". (2019): http://dx.doi.org/10.4028/www.scientific.net/amm.890.146.
    10.4028/www.scientific.net/amm.890.146
  29. Geoffrey Robert, Mitchell. "Towards a Conceptual Notion for a Universal Printing Machine". Applied Mechanics and Materials (2019): http://dx.doi.org/10.4028/www.scientific.net/amm.890.61.
    10.4028/www.scientific.net/amm.890.61
  30. Geoffrey Robert, Mitchell. "The Exploitation of Polymer Based Nanocomposites for Additive Manufacturing: A Prospective Review". (2019): http://dx.doi.org/10.4028/www.scientific.net/amm.890.113.
    10.4028/www.scientific.net/amm.890.113
  31. Geoffrey Robert, Mitchell. "Industry 4.0 - Digital Twin Applied to Direct Digital Manufacturing". Applied Mechanics and Materials (2019): http://dx.doi.org/10.4028/www.scientific.net/amm.890.54.
    10.4028/www.scientific.net/amm.890.54
  32. Geoffrey Robert, Mitchell. "Rosin Based Composites for Additive Manufacturing". (2019): http://dx.doi.org/10.4028/www.scientific.net/amm.890.70.
    10.4028/www.scientific.net/amm.890.70
  33. Geoffrey Robert, Mitchell. "Smart Polymers in Drug Delivery Applications". (2019): http://dx.doi.org/10.4028/www.scientific.net/amm.890.324.
    10.4028/www.scientific.net/amm.890.324
  34. Geoffrey Robert, Mitchell. "Numerical Thermal Analysis of a T Jump System Used for Studying Polymer Behaviour". (2019): http://dx.doi.org/10.4028/www.scientific.net/amm.890.155.
    10.4028/www.scientific.net/amm.890.155
  35. Geoffrey Robert, Mitchell. "Direct Digital Manufacturing of Nanocomposites". (2019): http://dx.doi.org/10.4028/www.scientific.net/amm.890.92.
    10.4028/www.scientific.net/amm.890.92
  36. Geoffrey Robert, Mitchell. "Smart Materials for Biomedical Applications: The Usefulness of Shape-Memory Polymers". (2019): http://dx.doi.org/10.4028/www.scientific.net/amm.890.237.
    10.4028/www.scientific.net/amm.890.237
  37. Geoffrey Robert, Mitchell. "Polyethylene and the Nucleating Agent: Dibenzylidene Sorbitol, a Neutron Scattering Study". (2019): http://dx.doi.org/10.4028/www.scientific.net/amm.890.199.
    10.4028/www.scientific.net/amm.890.199
  38. Pattanashetti, N.A.; Biscaia, S.; Moura, C.; Mitchell, G.R.; Kariduraganavar, M.Y.. "Development of novel 3D scaffolds using BioExtruder by the incorporation of silica into polycaprolactone matrix for bone tissue engineering". Materials Today Communications 21 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85072867484&partnerID=MN8TOARS.
    10.1016/j.mtcomm.2019.100651
  39. Daulbayev, Ch.; Mansurov, Z.; Mitchell, G.; Zakhidov, A.. "Obtaining of Biologically Soluble Membranes Based on Polymeric Nanofibres and Hydroxyapatite of Calcium". Eurasian Chemico-Technological Journal 20 2 (2018): 119. http://dx.doi.org/10.18321/ectj690.
    Publicado • 10.18321/ectj690
  40. Mitchell, Geoffrey; Olley, Robert. "Orthogonal Templating Control of the Crystallisation of Poly(e-Caprolactone)". Polymers 10 3 (2018): 300. http://dx.doi.org/10.3390/polym10030300.
    Publicado • 10.3390/polym10030300
  41. Singh, Upindranath; Mohan, Saeed; Davis, Frederick; Mitchell, Geoffrey. "Modifying the thermomechanical properties of electrospun fibres of poly-vinyl cinnamate by photo-cross-linking". (2018): http://dx.doi.org/10.1007/s42452-018-0033-8.
    10.1007/s42452-018-0033-8
  42. Zhong, J.; Mohan, S.D.; Bell, A.; Terry, A.; Mitchell, G.R.; Davis, F.J.. "Electrospinning of food-grade nanofibres from whey protein". International Journal of Biological Macromolecules 113 (2018): 764-773. http://www.scopus.com/inward/record.url?eid=2-s2.0-85043363004&partnerID=MN8TOARS.
    10.1016/j.ijbiomac.2018.02.113
  43. Auriemma, F.; De Rosa, C.; Di Girolamo, R.; Malafronte, A.; Scoti, M.; Mitchell, G.R.; Esposito, S.. "Time-resolving study of stress-induced transformations of isotactic polypropylene through wide angle X-ray scattering measurements". Polymers 10 2 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85041703649&partnerID=MN8TOARS.
    10.3390/polym10020162
  44. Heidari, Alireza. "Small-Angle X-Ray Scattering (SAXS), Ultra-Small Angle X-Ray Scattering (USAXS), Fluctuation X-Ray Scattering (FXS), Wide-Angle X-Ray Scattering (WAXS), Grazing-Incidence Small-Angle X-Ray Scattering (GISAXS), Grazing-Incidence Wide-Angle X-Ray Scattering (GIWAXS), Small-Angle Neutron Scattering (SANS), Grazing-Incidence Small-Angle Neutron Scattering (GISANS), X-Ray Diffraction (XRD), Powder X-Ra". Oncology Research and Reviews 1 1 (2017): http://dx.doi.org/10.15761/orr.1000104.
    10.15761/orr.1000104
  45. Dumitriu, Raluca P.; Mitchell, Geoffrey R.; Davis, Fred J.; Vasile, Cornelia. "Functionalized Coatings by Electrospinning for Anti-oxidant Food Packaging". Procedia Manufacturing 12 (2017): 59-65. http://dx.doi.org/10.1016/j.promfg.2017.08.008.
    Publicado • 10.1016/j.promfg.2017.08.008
  46. Mitchell, Geoffrey R.; Maetus, Artur; Davis, Fred; Mohan, Saeed; Gkourmpis, Thomas; Youngs, Tristan. "New Tools for Understanding Complex Polymer Behaviour". (2017): http://dx.doi.org/10.1016/j.promfg.2017.08.031.
    10.1016/j.promfg.2017.08.031
  47. Mitchell, Geoffrey R.; Carreira, Pedro; Gomes, Sara; Mateus, Artur; Mohan, Saeed. "Morphology Development During Micro Injection Moulding of Thermoplastics". (2017): http://dx.doi.org/10.1016/j.promfg.2017.08.027.
    10.1016/j.promfg.2017.08.027
  48. Khan, Imran; Mohan, Saeed D.; Belbut, Miguel; Kamma-Lorger, Christina S.; Mateus, Artur; Mitchell, Geoffrey R.. "Multiscale Structure Evolution in Electrically Conductive Nanocomposites Studied by SAXS". (2017): http://dx.doi.org/10.1016/j.promfg.2017.08.011.
    10.1016/j.promfg.2017.08.011
  49. Khan, Imran; Mateus, Artur; Lorger, Christina S. Kamma.; Mitchell, Geoffrey R.. "Part Specific Applications of Additive Manufacturing". (2017): http://dx.doi.org/10.1016/j.promfg.2017.08.012.
    10.1016/j.promfg.2017.08.012
  50. Alazab, Mohamed; Mitchell, Geoffrey R.; Davis, Fred J.; Mohan, Saeed D.. "Sustainable Electrospinning of Nanoscale Fibres". (2017): http://dx.doi.org/10.1016/j.promfg.2017.08.009.
    10.1016/j.promfg.2017.08.009
  51. Auriemma, F.; De Rosa, C.; Di Girolamo, R.; Malafronte, A.; Scoti, M.; Mitchell, G.R.; Esposito, S.. "Deformation of Stereoirregular Isotactic Polypropylene across Length Scales. Influence of Temperature". Macromolecules 50 7 (2017): 2856-2870. http://www.scopus.com/inward/record.url?eid=2-s2.0-85017601088&partnerID=MN8TOARS.
    10.1021/acs.macromol.7b00045
  52. Mitchell, G.R.. "Climate Change and Manufacturing". Procedia Manufacturing 12 (2017): 298-306. http://www.scopus.com/inward/record.url?eid=2-s2.0-85029864802&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.08.033
  53. Silvestre, C.; Pezzuto, M.; Duraccio, D.; Mitchell, G.R.; Cimmino, S.. "Quiescent and shear-induced non-isothermal crystallization of isotactic polypropylene-based nanocomposites". Polymer Bulletin 74 1 (2017): 145-165. http://www.scopus.com/inward/record.url?eid=2-s2.0-85008440681&partnerID=MN8TOARS.
    10.1007/s00289-016-1704-5
  54. Pedro Morouço; Sara Biscaia; Tânia Viana; Margarida Franco; Cândida Malça; Artur Mateus; Carla Moura; et al. "Fabrication of Poly(e-caprolactone) Scaffolds Reinforced with Cellulose Nanofibers, with and without the Addition of Hydroxyapatite Nanoparticles". (2016): https://doi.org/10.1155/2016/1596157.
    10.1155/2016/1596157
  55. Mitchell, Geoffrey R.; Biscaia, Sara; Mahendra, Vidhura Subash; Mateus, Artur. "High Value Materials from the Forests". (2016): http://dx.doi.org/10.4236/ampc.2016.63006.
    10.4236/ampc.2016.63006
  56. Pedro Morouço; Sara Biscaia; Tânia Viana; Margarida Franco; Cândida Malça; Artur Mateus; Carla Moura; et al. "Fabrication of Poly(e-caprolactone) Scaffolds Reinforced with Cellulose Nanofibers, with and without the Addition of Hydroxyapatite Nanoparticles". (2016): https://doi.org/10.1155/2016/1596157.
  57. El-Hachemi, Z.; Balaban, T.S.; Campos, J.L.; Cespedes, S.; Crusats, J.; Escudero, C.; Kamma-Lorger, C.S.; et al. "Effect of Hydrodynamic Forces on meso-(4-Sulfonatophenyl)-Substituted Porphyrin J-Aggregate Nanoparticles: Elasticity, Plasticity and Breaking". Chemistry - A European Journal 22 28 (2016): 9740-9749. http://www.scopus.com/inward/record.url?eid=2-s2.0-84971401641&partnerID=MN8TOARS.
    10.1002/chem.201600874
  58. Premakshi, H.G.; Kariduraganavar, M.Y.; Mitchell, G.R.. "Development of composite anion-exchange membranes using poly(vinyl alcohol) and silica precursor for pervaporation separation of water-isopropanol mixtures". RSC Advances 6 14 (2016): 11802-11814. http://www.scopus.com/inward/record.url?eid=2-s2.0-84957038652&partnerID=MN8TOARS.
    10.1039/c5ra19858e
  59. Mohan, S.D.; Mitchell, G.R.; Davis, F.J.. "Development of Molecular Anisotropy in Centrifugally Spun Fibers as Compared to Electrospun Fibers". Macromolecular Materials and Engineering 301 11 (2016): 1313-1319. http://www.scopus.com/inward/record.url?eid=2-s2.0-84984670429&partnerID=MN8TOARS.
    10.1002/mame.201600275
  60. Khan, Imran; Mitchell, Geoffrey; Mateus, Artur; Kamma-Lorger, Christina S. "Time resolved strain dependent morphological study of electrically conducting nanocomposites". (2015): http://dx.doi.org/10.1088/1742-6596/646/1/012034.
    10.1088/1742-6596/646/1/012034
  61. Mitchell, Geoffrey R.; Tojeira, Ana; Gkourmpis, Thomas; Holt, James J.; Harris, Peter; Pezzuto, Marilena. "Controlling and Evaluating the Structure and Morphology of Polymers on Multiple Scales". (2015): http://dx.doi.org/10.4236/msce.2015.312009.
    10.4236/msce.2015.312009
  62. Echeverria, C.; Rubio, M.; Mitchell, G.R.; Roig, A.; Lõpez, D.. "Hybrid polystyrene based electrospun fibers with spin-crossover properties". Journal of Polymer Science, Part B: Polymer Physics 53 11 (2015): 814-821. http://www.scopus.com/inward/record.url?eid=2-s2.0-84928157118&partnerID=MN8TOARS.
    10.1002/polb.23702
  63. Duraccio, D.; Mauriello, A.; Cimmino, S.; Silvestre, C.; Auriemma, F.; De Rosa, C.; Pirozzi, B.; Mitchell, G.R.. "Structure-property relationships in polyethylene based films obtained by blow molding as model system of industrial relevance". European Polymer Journal 62 (2015): 97-107. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919683423&partnerID=MN8TOARS.
    10.1016/j.eurpolymj.2014.11.009
  64. Singh, U.; Spink, M.; Davis, F.; Mitchell, G.. "Morphology of polymer networks formed in the chiral and non-chiral phases of an antiferroelectric liquid crystal". Chemical Physics Letters 641 (2015): 80-83. http://www.scopus.com/inward/record.url?eid=2-s2.0-84946823535&partnerID=MN8TOARS.
    10.1016/j.cplett.2015.10.047
  65. Olley, Robert H.; Mitchell, Geoffrey R.; Moghaddam, Yasmin. "On row-structures in sheared polypropylene and a propylene–ethylene copolymer". (2014): http://dx.doi.org/10.1016/j.eurpolymj.2014.01.010.
    10.1016/j.eurpolymj.2014.01.010
  66. El-Hadi, A.M.; Mohan, S.D.; Davis, F.J.; Mitchell, G.R.. "Enhancing the crystallization and orientation of electrospinning poly (lactic acid) (PLLA) by combining with additives". Journal of Polymer Research 21 12 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84912019594&partnerID=MN8TOARS.
    10.1007/s10965-014-0605-2
  67. Echeverría, C.; Rubio, M.; Mitchell, G.R.; López, D.. "Structure of a spin-crossover Fe(II)-1,2,4-triazole polymer complex gel in toluene. Small angle neutron scattering and viscoelastic studies". European Polymer Journal 53 1 (2014): 238-245. http://www.scopus.com/inward/record.url?eid=2-s2.0-84894582432&partnerID=MN8TOARS.
    10.1016/j.eurpolymj.2014.01.034
  68. Gkourmpis, T.; Mitchell, G.R.. "Experimentally driven atomistic model of 1,2 polybutadiene". Journal of Applied Physics 115 5 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84906861130&partnerID=MN8TOARS.
    10.1063/1.4863950
  69. Pratt, C.M.; Davis, F.J.; Mitchell, G.R.. "Controlling the properties of materials manufactured using recycled PVC". Green Design, Materials and Manufacturing Processes - Proceedings of the 2nd International Conference on Sustainable Intelligent Manufacturing, SIM 2013 (2013): 459-463. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880104836&partnerID=MN8TOARS.
    10.1201/b15002-89
  70. Robert, Mitchell. "SANS/WANS Time Resolving Neutron Scattering Studies of Polymer Phase Transitions using NIMROD". MRS proceedings (2013):
    10.1557/opl.2013.363
  71. Robert, Mitchell. "Multiscale modelling of polymers closely coupled to Broad Q neutron scattering from NIMROD". MRS Proceedings (2013):
    10.1557/opl.2012.1765
  72. Mitchell, G.R.. "Novel plastics for sustainable building design". Green Design, Materials and Manufacturing Processes - Proceedings of the 2nd International Conference on Sustainable Intelligent Manufacturing, SIM 2013 (2013): 599-603. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880082986&partnerID=MN8TOARS.
    10.1201/b15002-116
  73. Mitchell, G.R.; Davis, F.J.. "Spectral shifters for an enhanced indoor environment". Green Design, Materials and Manufacturing Processes - Proceedings of the 2nd International Conference on Sustainable Intelligent Manufacturing, SIM 2013 (2013): 149-152. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880101273&partnerID=MN8TOARS.
  74. Tilston, E.L.; Collins, C.D.; Mitchell, G.R.; Princivalle, J.; Shaw, L.J.. "Nanoscale zerovalent iron alters soil bacterial community structure and inhibits chloroaromatic biodegradation potential in Aroclor 1242-contaminated soil". Environmental Pollution 173 (2013): 38-46. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870159248&partnerID=MN8TOARS.
    10.1016/j.envpol.2012.09.018
  75. Singh, U.; Davis, F.; Mohan, S.; Mitchell, G.. "Electro-active nanofibres electrospun from blends of poly-vinyl cinnamate and a cholesteric liquid crystalline silicone polymer". Journal of Materials Science 48 21 (2013): 7613-7619. http://www.scopus.com/inward/record.url?eid=2-s2.0-84882668065&partnerID=MN8TOARS.
    10.1007/s10853-013-7578-0
  76. Vieira, A.P.; Bártolo, H.; Mitchell, G.R.; Bártolo, P.. "Phase change materials as a tool for climate change mitigation". Green Design, Materials and Manufacturing Processes - Proceedings of the 2nd International Conference on Sustainable Intelligent Manufacturing, SIM 2013 (2013): 605-610. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880095256&partnerID=MN8TOARS.
    10.1201/b15002-117
  77. Mitchell, Geoffrey R.; Tojeira, Ana. "Role of Anisotropy in Tissue Engineering". (2013): http://dx.doi.org/10.1016/j.proeng.2013.05.100.
    10.1016/j.proeng.2013.05.100
  78. Professor Finizia Auriemma; Dr Fred Davis; Professor Geoffrey Mitchell; Dr Saeed Mohan; Dr Artur Mateus; Miss Anna Malafronte; Dr Marco Domingos; Miss Ana Tojeira; Professor Paulo Bartolo. "1220401 ...". (2013): https://dx.doi.org/10.5286/isis.e.24090895.
    10.5286/isis.e.24090895
  79. Hermida-Merino, D.; Belal, M.; Greenland, B.W.; Woodward, P.; Slark, A.T.; Davis, F.J.; Mitchell, G.R.; Hamley, I.W.; Hayes, W.. "Electrospun supramolecular polymer fibres". European Polymer Journal 48 7 (2012): 1249-1255. http://www.scopus.com/inward/record.url?eid=2-s2.0-84862846131&partnerID=MN8TOARS.
    10.1016/j.eurpolymj.2012.04.015
  80. Mitchell, G.R.; Domingos, M.; Bartolo, P.. "Polymers, biomanufacturing and regenerative medicine". Advanced Materials Research 506 (2012): 11-14. http://www.scopus.com/inward/record.url?eid=2-s2.0-84860822565&partnerID=MN8TOARS.
    10.4028/www.scientific.net/AMR.506.11
  81. Dias, R.T.; Mateus, A.; Mitchell, G.R.; Bártolo, P.J.. "Computer modelling and simulation of reaction injection moulding: Filling and curing stages". Innovative Developments in Virtual and Physical Prototyping - Proceedings of the 5th International Conference on Advanced Research and Rapid Prototyping (2012): 731-736. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856748709&partnerID=MN8TOARS.
  82. Mateus, A.; Mitchell, G.; Bártolo, P.. "Computational fluid dynamics of reaction injection moulding". AIP Conference Proceedings 1479 1 (2012): 1584-1587. http://www.scopus.com/inward/record.url?eid=2-s2.0-84883082456&partnerID=MN8TOARS.
    10.1063/1.4756467
  83. Waheed, A.; Mitchell, G.R.; Harris, P.J.F.; Farmer, M.; Watts, A.; Naseem, S.; Riaz, S.; Chakarvarti, S.K.. "Fission fragments track-etched pores in borate glass". International Journal of Pharma and Bio Sciences 3 1 (2012): P368-P374. http://www.scopus.com/inward/record.url?eid=2-s2.0-84892460096&partnerID=MN8TOARS.
  84. Dumitriu, R.P.; Mitchell, G.R.; Vasile, C.. "Rheological and thermal behaviour of poly(N-isopropylacrylamide)/alginate smart polymeric networks". Polymer International 60 9 (2011): 1398-1407. http://www.scopus.com/inward/record.url?eid=2-s2.0-80051905952&partnerID=MN8TOARS.
    10.1002/pi.3093
  85. Cullen, L.G.; Tilston, E.L.; Mitchell, G.R.; Collins, C.D.; Shaw, L.J.. "Assessing the impact of nano- and micro-scale zerovalent iron particles on soil microbial activities: Particle reactivity interferes with assay conditions and interpretation of genuine microbial effects". Chemosphere 82 11 (2011): 1675-1682. http://www.scopus.com/inward/record.url?eid=2-s2.0-79951723797&partnerID=MN8TOARS.
    10.1016/j.chemosphere.2010.11.009
  86. Dumitriu, R.P.; Mitchell, G.R.; Vasile, C.. "Multi-responsive hydrogels based on N-isopropylacrylamide and sodium alginate". Polymer International 60 2 (2011): 222-233. http://www.scopus.com/inward/record.url?eid=2-s2.0-78651432834&partnerID=MN8TOARS.
    10.1002/pi.2929
  87. Mitchell, G.R.; Ahn, K.-H.; Davis, F.J.. "The potential of electrospinning in rapid manufacturing processes: The fundamentals of electrospinning, key process parameters, materials and potential application in rapid manufacturing are presented in this paper". Virtual and Physical Prototyping 6 2 (2011): 63-77. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960681009&partnerID=MN8TOARS.
    10.1080/17452759.2011.590387
  88. Mitchell, G.R.. "Neutron Diffraction from Polymers and Other Soft Matter". Neutrons in Soft Matter (2011): 571-599. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886156130&partnerID=MN8TOARS.
    10.1002/9780470933886.ch21
  89. Mohan, S.D.; Mitchell, G.R.; Davis, F.J.. "Chain extension in electrospun polystyrene fibres: A SANS study". Soft Matter 7 9 (2011): 4397-4404. http://www.scopus.com/inward/record.url?eid=2-s2.0-79954988839&partnerID=MN8TOARS.
    10.1039/c0sm01442g
  90. Gkourmpis, T.; Mitchell, G.R.. "Three dimensional picture of the local structure of 1,4-polybutadiene from a complete atomistic model and neutron scattering data". Macromolecules 44 8 (2011): 3140-3148. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955046994&partnerID=MN8TOARS.
    10.1021/ma102840p
  91. Edwards, M.D.; Mitchell, G.R.; Mohan, S.D.; Olley, R.H.. "Development of orientation during electrospinning of fibres of poly(e-caprolactone)". European Polymer Journal 46 6 (2010): 1175-1183. http://www.scopus.com/inward/record.url?eid=2-s2.0-79952963192&partnerID=MN8TOARS.
    10.1016/j.eurpolymj.2010.03.017
  92. Mohan, S.D.; Davis, F.J.; Olley, R.H.; Mitchell, G.R.. "Modelling small angle neutron scattering data from electrospun fibres". Journal of Physics: Conference Series 247 (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-78651103307&partnerID=MN8TOARS.
    10.1088/1742-6596/247/1/012042
  93. Kariduraganavar, M.Y.; Davis, F.J.; Mitchell, G.R.; Olley, R.H.. "Using an additive to control the electrospinning of fibres of poly(e-caprolactone)". Polymer International 59 6 (2010): 827-835. http://www.scopus.com/inward/record.url?eid=2-s2.0-77954524055&partnerID=MN8TOARS.
    10.1002/pi.2795
  94. Sen, S.; Davis, F.J.; Mitchell, G.R.; Robinson, E.. "Conducting nanofibres produced by electrospinning". Journal of Physics: Conference Series 183 (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-69649086671&partnerID=MN8TOARS.
    10.1088/1742-6596/183/1/012020
  95. Mohan, S.; Sen, S.; Mitchell, G.R.; Olley, R.H.; Davis, F.J.. "Electrospinning atactic polystyrene: A neutron scattering study". Journal of Physics: Conference Series 183 (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-69649101769&partnerID=MN8TOARS.
    10.1088/1742-6596/183/1/012019
  96. Wangsoub, S.; Mitchell, G.R.. "Shear controlled crystal size definition in a low molar mass compound using a polymeric solvent". Soft Matter 5 3 (2009): 525-528. http://www.scopus.com/inward/record.url?eid=2-s2.0-67649995053&partnerID=MN8TOARS.
    10.1039/b814522a
  97. Tambe, S.M.; Kittur, A.A.; Inamdar, S.R.; Mitchell, G.R.; Kariduraganavar, M.Y.. "Synthesis and characterization of thermally stable second-order nonlinear optical side-chain polyimides containing thiazole and benzothiazole push-pull chromophores". Optical Materials 31 6 (2009): 817-825. http://www.scopus.com/inward/record.url?eid=2-s2.0-62549105298&partnerID=MN8TOARS.
    10.1016/j.optmat.2008.09.005
  98. Waheed, A.; Forsyth, D.; Watts, A.; Saad, A.F.; Mitchell, G.R.; Farmer, M.; Harris, P.J.F.. "The track nanotechnology". Radiation Measurements 44 9-10 (2009): 1109-1113. http://www.scopus.com/inward/record.url?eid=2-s2.0-70949106697&partnerID=MN8TOARS.
    10.1016/j.radmeas.2009.10.055
  99. Elliott, D.E.; Davis, F.J.; Mitchell, G.R.; Olley, R.H.. "Structure development in electrospun fibres of gelatin". Journal of Physics: Conference Series 183 (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-69649098500&partnerID=MN8TOARS.
    10.1088/1742-6596/183/1/012021
  100. Peace, M.H.K.; Mitchell, G.R.. "Conductive elastomeric composites". Journal of Physics: Conference Series 183 (2009): http://www.scopus.com/inward/record.url?eid=2-s2.0-69649100893&partnerID=MN8TOARS.
    10.1088/1742-6596/183/1/012011
  101. Green, C.D.; Vaughan, A.S.; Mitchell, G.R.; Liu, T.. "Structure property relationships in polyethylene/montmorillonite nanodielectrics". IEEE Transactions on Dielectrics and Electrical Insulation 15 1 (2008): 134-143. http://www.scopus.com/inward/record.url?eid=2-s2.0-38949091040&partnerID=MN8TOARS.
    10.1109/T-DEI.2008.4446744
  102. Wangsoub, S.; Davis, F.J.; Mitchell, G.R.; Olley, R.H.. "Enhanced templating in the crystallisation of poly(e-caprolactone) using 1,3:2,4-di(4-chlorobenzylidene) sorbitol". Macromolecular Rapid Communications 29 23 (2008): 1861-1865. http://www.scopus.com/inward/record.url?eid=2-s2.0-57049158766&partnerID=MN8TOARS.
    10.1002/marc.200800497
  103. Mitchell, G.R.; Belal, M.; Davis, F.J.; Elliott, D.E.; Kariduraganavar, M.; Mohan, S.D.; Olley, R.H.; Sen, S.. "Defining structure in electrospun polymer fibres". Advanced Materials Research 55-57 (2008): 33-36. http://www.scopus.com/inward/record.url?eid=2-s2.0-62949102288&partnerID=MN8TOARS.
    10.4028/www.scientific.net/amr.55-57.33
  104. Mitchell, G.R.; Davis, F.J.; Vaughan, A.S.; Mossman, S.. "75 years of polyethylene: Past successes and future challenges". Applied Rheology 18 5 (2008): 316-318. http://www.scopus.com/inward/record.url?eid=2-s2.0-56449099827&partnerID=MN8TOARS.
  105. Channuan, W.; Siripitayananon, J.; Molloy, R.; Mitchell, G.R.. "Defining the physical structure and properties in novel monofilaments with potential for use as absorbable surgical sutures based on a lactide containing block terpolymer". Polymer 49 20 (2008): 4433-4445. http://www.scopus.com/inward/record.url?eid=2-s2.0-50949097358&partnerID=MN8TOARS.
    10.1016/j.polymer.2008.07.058
  106. Auriemma, F.; De Rosa, C.; Esposito, S.; Mitchell, G.R.. "Polymorphic superelasticity in semicrystalline polymers". Angewandte Chemie - International Edition 46 23 (2007): 4325-4328. http://www.scopus.com/inward/record.url?eid=2-s2.0-34447254514&partnerID=MN8TOARS.
    10.1002/anie.200605021
  107. Zhang, X.; Song, W.; Harris, P.J.F.; Mitchell, G.R.; Bui, T.T.T.; Drake, A.F.. "Chiral polymer-carbon-nanotube composite nanofibers". Advanced Materials 19 8 (2007): 1079-1083. http://www.scopus.com/inward/record.url?eid=2-s2.0-34250672082&partnerID=MN8TOARS.
    10.1002/adma.200601886
  108. Cerva, A.; Capela, C.; Mateus, A.; Bártolo, P.J.; Mitchell, G.. "Composition and cure temperature: The influence on properties of final flexible PU cold cure foam parts". Proceedings of the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping: Virtual and Rapid Manufacturing Advanced Research Virtual and Rapid Prototyping (2007): 395-400. http://www.scopus.com/inward/record.url?eid=2-s2.0-75049083343&partnerID=MN8TOARS.
  109. Mateus, A.; Bártolo, P.J.; Mitchell, G.; Silva, M.; Pouzada, A.S.; Pontes, A.J.. "The effect of thermal conductivity of RIM moulds in kinetics cure". Proceedings of the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping: Virtual and Rapid Manufacturing Advanced Research Virtual and Rapid Prototyping (2007): 389-394. http://www.scopus.com/inward/record.url?eid=2-s2.0-75049085254&partnerID=MN8TOARS.
  110. Zhang, X.; Song, W.; Harris, P.J.F.; Mitchell, G.R.. "Electrodeposition of chiral polymer-carbon nanotube composite films". ChemPhysChem 8 12 (2007): 1766-1769. http://www.scopus.com/inward/record.url?eid=2-s2.0-34548445107&partnerID=MN8TOARS.
    10.1002/cphc.200700213
  111. An, Y.; Holt, J.J.; Mitchell, G.R.; Vaughan, A.S.. "Influence of molecular composition on the development of microstructure from sheared polyethylene melts: Molecular and lamellar templating". Polymer 47 15 (2006): 5643-5656. http://www.scopus.com/inward/record.url?eid=2-s2.0-33745921764&partnerID=MN8TOARS.
    10.1016/j.polymer.2006.01.097
  112. Mitchell, G.R.; Saengsuwan, S.; Bualek-Limcharoen, S.. "Evaluation of preferred orientation in multi-component polymer systems using x-ray scattering procedures". Progress in Colloid and Polymer Science 130 (2005): 149-158. http://www.scopus.com/inward/record.url?eid=2-s2.0-22444435823&partnerID=MN8TOARS.
    10.1007/b107341
  113. Channuan, W.; Siripitayananon, J.; Molloy, R.; Sriyai, M.; Davis, F.J.; Mitchell, G.R.. "The structure of crystallisable copolymers of l-lactide, e-caprolactone and glycolide". Polymer 46 17 (2005): 6411-6428. http://www.scopus.com/inward/record.url?eid=2-s2.0-33748921879&partnerID=MN8TOARS.
    10.1016/j.polymer.2005.04.097
  114. Nogales, A.; Mitchell, G.R.. "Development of highly oriented polymer crystals from row assemblies". Polymer 46 15 (2005): 5615-5620. http://www.scopus.com/inward/record.url?eid=2-s2.0-20444431897&partnerID=MN8TOARS.
    10.1016/j.polymer.2005.04.088
  115. Santulli, C.; Patel, S.I.; Jeronimidis, G.; Davis, F.J.; Mitchell, G.R.. "Development of smart variable stiffness actuators using polymer hydrogels". Smart Materials and Structures 14 2 (2005): 434-440. http://www.scopus.com/inward/record.url?eid=2-s2.0-17444420723&partnerID=MN8TOARS.
    10.1088/0964-1726/14/2/018
  116. Wangsoub, S.; Olley, R.H.; Mitchell, G.R.. "Directed crystallisation of poly(e-caprolactone) using a low-molar-mass self-assembled template". Macromolecular Chemistry and Physics 206 18 (2005): 1826-1839. http://www.scopus.com/inward/record.url?eid=2-s2.0-25844474409&partnerID=MN8TOARS.
    10.1002/macp.200500176
  117. Nogales, A.; Thornley, S.A.; Mitchell, G.R.. "Shear cell for in situ WAXS, SAXS, and SANS experiments on polymer melts under flow fields". Journal of Macromolecular Science - Physics 43 B 6 (2004): 1161-1170. http://www.scopus.com/inward/record.url?eid=2-s2.0-9944255746&partnerID=MN8TOARS.
    10.1081/MB-200026521
  118. Siripitayananon, J.; Wangsoub, S.; Olley, R.H.; Mitchell, G.R.. "The use of a low-molar-mass self-assembled template to direct the crystallisation of poly(e-caprolactone)". Macromolecular Rapid Communications 25 15 (2004): 1365-1370. http://www.scopus.com/inward/record.url?eid=2-s2.0-4544377813&partnerID=MN8TOARS.
    10.1002/marc.200400157
  119. Bartolo, P.J.; Mitchell, G.. "Stereo-thermal-lithography: A new principle for rapid prototyping". Rapid Prototyping Journal 9 3 (2003): 150-156. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037704163&partnerID=MN8TOARS.
    10.1108/13552540310477454
  120. Nogales, A.; Olley, R.H.; Mitchell, G.R.. "Directed crystallisation of synthetic polymers by low-molar-mass self-assembled templates". Macromolecular Rapid Communications 24 8 (2003): 496-502. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038127219&partnerID=MN8TOARS.
    10.1002/marc.200390077
  121. Saengsuwan, S.; Bualek-Limcharoen, S.; Mitchell, G.R.; Olley, R.H.. "Thermotropic liquid crystalline polymer (Rodrun LC5000)/polypropylene in situ composite films: Rheology, morphology, molecular orientation and tensile properties". Polymer 44 11 (2003): 3407-3415. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037991354&partnerID=MN8TOARS.
    10.1016/S0032-3861(03)00244-1
  122. Saengsuwan, S.; Mitchell, G.R.; Bualek-Limcharoen, S.. "Determination of orientation parameters in drawn films of thermotropic liquid crystalline polymer/polypropylene blends using WAXS". Polymer 44 19 (2003): 5951-5959. http://www.scopus.com/inward/record.url?eid=2-s2.0-0042380213&partnerID=MN8TOARS.
    10.1016/S0032-3861(03)00560-3
  123. Nogales, A.; Mitchell, G.R.; Vaughan, A.S.. "Anisotropic crystallization in polypropylene induced by deformation of a nucleating agent network". Macromolecules 36 13 (2003): 4898-4906. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038119558&partnerID=MN8TOARS.
    10.1021/ma0343028
  124. Smith, M.A.G.; Mitchell, G.R.; O'Leary, S.V.. "Local gratings due to angular hole burning in a photorefractive polymer". Journal of Optics A: Pure and Applied Optics 4 4 (2002): 474-480. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036649028&partnerID=MN8TOARS.
    10.1088/1464-4258/4/4/318
  125. Brittin, M.; Mitchell, G.R.; Vaughan, A.S.. "A transmission electron microscopy study of polymer-stabilised liquid crystal structure". Journal of Materials Science 36 20 (2001): 4911-4920. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035888558&partnerID=MN8TOARS.
    10.1023/A:1011888304134
  126. Hirschmann, H.; Roberts, P.M.S.; Davis, F.J.; Guo, W.; Hasson, C.D.; Mitchell, G.R.. "Liquid crystalline elastomers: The relationship between macroscopic behaviour and the level of backbone anisotropy". Polymer 42 16 (2001): 7063-7071. http://www.scopus.com/inward/record.url?eid=2-s2.0-0342903244&partnerID=MN8TOARS.
    10.1016/S0032-3861(01)00135-5
  127. He, Z.; Davis, F.J.; Olley, R.H.; Mitchell, G.R.. "Phase behaviour and non-periodic crystallisation of random aromatic copolyesters and their side chain bearing systems". Polymer 42 12 (2001): 5351-5363. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035087267&partnerID=MN8TOARS.
    10.1016/S0032-3861(00)00926-5
  128. Brittin, M.; Mitchell, G.R.; Gilbert, A.. "A novel study of the polymerisation process involved in the formation of the network component of polymer-stabilised liquid crystals within electro-optic cells using high performance liquid chromatography". Molecular Crystals and Liquid Crystals Science and Technology, Section A: Molecular Crystals and Liquid Crystals 357 (2001): 99-115. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034952899&partnerID=MN8TOARS.
  129. Brittin, M.; Mitchell, G.R.; Vaughan, A.S.. "Observation of the internal network structure of a polymer-stabilized liquid crystal via transmission electron microscopy". Liquid Crystals 27 5 (2000): 693-696. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033661998&partnerID=MN8TOARS.
  130. Zhang, Q.X.; An, Y.X.; Yu, Y.N.; Mo, Z.S.; Mitchell, G.R.. "Crystal Transformation of Nylon 11 Using in situ WAXD". Chinese Chemical Letters 11 4 (2000): 365-366. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034396094&partnerID=MN8TOARS.
  131. Jauregi, P.; Mitchell, G.R.; Varley, J.. "Colloidal gas aphrons (CGA): Dispersion and structural features". AIChE Journal 46 1 (2000): 24-36. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033967991&partnerID=MN8TOARS.
  132. Symons, A.J.; Davis, F.J.; Mitchell, G.R.. "Side-chain liquid crystalline elastomers: The relationship between the orientational ordering of the polymer backbone and the length of the coupling chain". Polymer 40 19 (1999): 5365-5370. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032797099&partnerID=MN8TOARS.
    10.1016/S0032-3861(98)00745-9
  133. Pople, J.A.; Mitchell, G.R.; Sutton, S.J.; Vaughan, A.S.; Chai, C.K.. "The development of organized structures in polyethylene crystallized from a sheared melt, analyzed by WAXS and TEM". Polymer 40 10 (1999): 2769-2777. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033137190&partnerID=MN8TOARS.
    10.1016/S0032-3861(98)00202-X
  134. Mitchell, G.R.; King, N.R.. "Optimisation of photo-induced geometric isomerisation of azobenzene derivatives in dye-doped polymer films for enhanced photo-induced poling". Macromolecular Symposia 137 (1999): 155-165. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033454804&partnerID=MN8TOARS.
  135. Hasson, C.D.; Davis, F.J.; Mitchell, G.R.. "Imprinting Chiral Structure on Liquid Crystalline Elastomers". Molecular Crystals and Liquid Crystals Science and Technology Section A: Molecular Crystals and Liquid Crystals 332 (1999): 155-162. http://www.scopus.com/inward/record.url?eid=2-s2.0-0042728190&partnerID=MN8TOARS.
  136. Abbas, B.; Mitchell, G.R.. "Enhanced Second Order Non-Linear Optical Properties of Silica Sol-Gel Thin Films Through Photo-Induced Poling". Journal of Sol-Gel Science and Technology 13 1-3 (1999): 647-650. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032318133&partnerID=MN8TOARS.
    10.1023/a:1008672100872
  137. Brittin, M.; Mitchell, G.R.. "Evolution of network structure in polymer-stabilized liquid crystals". Molecular Crystals and Liquid Crystals Science and Technology Section A: Molecular Crystals and Liquid Crystals 329 (1999): 757-764. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033349284&partnerID=MN8TOARS.
  138. Yusof, A.A.R.A.; O'Leary, S.V.; Mitchell, G.R.. "Temperature-tuned vector phase conjugation in azobenzene dye impregnated polymer films". Optics Communications 169 1-6 (1999): 333-340. http://www.scopus.com/inward/record.url?eid=2-s2.0-0002848361&partnerID=MN8TOARS.
  139. Mitchell, G.R.; Andresen, E.M.. "X-ray rheology of structured polymer melts". ACS Symposium Series 739 (1999): 390-404. http://www.scopus.com/inward/record.url?eid=2-s2.0-0041911125&partnerID=MN8TOARS.
    10.1021/bk-2000-0739.ch025
  140. Mitchell, G.R.; Rosi-Schwartz, B.. "Chain conformations and segmental interactions in fluoropolymer melts". American Chemical Society, Polymer Preprints, Division of Polymer Chemistry 39 2 (1998): http://www.scopus.com/inward/record.url?eid=2-s2.0-0032140334&partnerID=MN8TOARS.
  141. Kiani, M.S.; Davis, F.J.; Mitchell, G.R.. "Study of paramagnetism in pyrrole based conducting polymers using ESR measurements at low temperatures and pressures". Pakistan Journal of Scientific and Industrial Research 41 4 (1998): 167-174. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032447445&partnerID=MN8TOARS.
  142. Mitchell, G.R.; King, N.R.. "Optimisation of photo-induced geometric isomerisation of azobenzene derivatives in dye doped polymer films for enhanced photo-induced poling". American Chemical Society, Polymer Preprints, Division of Polymer Chemistry 39 2 (1998): 310-311. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032137715&partnerID=MN8TOARS.
  143. Abbas, B.; Mitchell, G.R.. "Enhanced second order non-linear optical properties of azobenzene based dye doped silica sol-gel systems through photo-induced poling". American Chemical Society, Polymer Preprints, Division of Polymer Chemistry 39 2 (1998): 352-353. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032141681&partnerID=MN8TOARS.
  144. Smith, M.A.; Mitchell, G.R.; O'Leary, S.V.. "Grating competition effects in photorefractive polymers". Proceedings of SPIE - The International Society for Optical Engineering 3471 (1998): 72-80. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032404838&partnerID=MN8TOARS.
    10.1117/12.328150
  145. Andresen, E.M.; Mitchell, G.R.. "In situ X-ray scattering investigations of solutions of cellulose in N-methylmorpholine-N-oxide during shear flow". Polymer 39 26 (1998): 7127-7129. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032440659&partnerID=MN8TOARS.
  146. Hasson, C.D.; Davis, F.J.; Mitchell, G.R.. "Imprinting chiral structures on liquid crystalline elastomers". Chemical Communications 22 (1998): 2515-2516. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032556467&partnerID=MN8TOARS.
  147. Mitchell, G.R.; O'Leary, S.V.; Smith, M.A.. "Grating competition and interaction photorefractive polymers". American Chemical Society, Polymer Preprints, Division of Polymer Chemistry 39 2 (1998): 989-990. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032140538&partnerID=MN8TOARS.
  148. Lacey, D.; Beattie, H.N.; Mitchell, G.R.; Pople, J.A.. "Orientation effects in monodomain nematic liquid crystalline polysiloxane elastomers". Journal of Materials Chemistry 8 1 (1998): 53-60. http://www.scopus.com/inward/record.url?eid=2-s2.0-0001852186&partnerID=MN8TOARS.
  149. Andresen, E.M.; Mitchell, G.R.. "Orientational behaviour of thermotropic and lyotropic liquid crystal polymer systems under shear flow". Europhysics Letters 43 3 (1998): 296-301. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032142621&partnerID=MN8TOARS.
    10.1209/epl/i1998-00355-6
  150. O'Leary, S.V.; Smith, M.A.; Mitchell, G.R.. "Grating competition in photorefractive polymers". Conference on Lasers and Electro-Optics Europe - Technical Digest (1998): http://www.scopus.com/inward/record.url?eid=2-s2.0-0031621493&partnerID=MN8TOARS.
  151. King, N.R.; Whale, E.A.; Davis, F.J.; Gilbert, A.; Mitchell, G.R.. "Effect of media polarity on the photoisomerisation of substituted stilbene, azobenzene and imine chromophores". Journal of Materials Chemistry 7 4 (1997): 625-630. http://www.scopus.com/inward/record.url?eid=2-s2.0-0001597754&partnerID=MN8TOARS.
  152. Bewsher, J.O.; Mitchell, G.R.. "Study of the nonlinear optical properties of a crosslinkable chromophore for use in guest host polymer films". Optical Engineering 36 1 (1997): 167-174. http://www.scopus.com/inward/record.url?eid=2-s2.0-0542418444&partnerID=MN8TOARS.
  153. Ahn, K.-H.; Roberts, P.M.S.; Davis, F.J.; Mitchell, G.R.. "Electric field induced macroscopic shape changes in liquid crystal elastomers". American Chemical Society, Polymer Preprints, Division of Polymer Chemistry 38 2 (1997): 554-555. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031238124&partnerID=MN8TOARS.
  154. Mitchell, G.R.; O'Leary, S.V.; Smith, M.A.. "Multiple grating formation in photorefracttve polymers". American Chemical Society, Polymer Preprints, Division of Polymer Chemistry 38 2 (1997): 510-511. http://www.scopus.com/inward/record.url?eid=2-s2.0-3242864639&partnerID=MN8TOARS.
  155. Pople, J.A.; Keates, P.A.; Mitchell, G.R.. "A two-dimensional X-ray scattering system for in-situ time-resolving studies of polymer structures subjected to controlled deformations". Journal of Synchrotron Radiation 4 5 (1997): 267-278. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031494470&partnerID=MN8TOARS.
  156. Mitchell, G.R.; Roberts, P.M.S.; Ahn, K.-H.; Davis, F.J.; Hasson, C.; Hirschmann, H.; Pople, J.A.. "Coupling and memory in liquid crystal elastomers". Macromolecular Symposia 117 (1997): 21-31. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031495679&partnerID=MN8TOARS.
  157. Roberts, P.M.S.; Mitchell, G.R.; Davis, F.J.. "Memory effects in monodomain liquid crystal elastomers produced in magnetic fields". Molecular Crystals and Liquid Crystals Science and Technology Section A: Molecular Crystals and Liquid Crystals 299 (1997): 223-228. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030704866&partnerID=MN8TOARS.
  158. Langley, P.J.; Davis, F.J.; Mitchell, G.R.. "Synthesis, phase behaviour and polymerisation of mesogenic materials based on 3-substituted pyrroles". Journal of the Chemical Society. Perkin Transactions 2 11 (1997): 2229-2239. http://www.scopus.com/inward/record.url?eid=2-s2.0-0000786175&partnerID=MN8TOARS.
  159. Bewsher, J.D.; Mitchell, G.R.. "Influence of cross-linking functionality on the nonlinear optical properties of poled and cross-linked polymer films". Applied Optics 36 30 (1997): 7760-7765. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031248216&partnerID=MN8TOARS.
  160. Pople, J.A.; Mitchell, G.R.. "WAXS studies of global molecular orientation induced in nematic liquid crystals by simple shear flow". Liquid Crystals 23 4 (1997): 467-473. http://www.scopus.com/inward/record.url?eid=2-s2.0-0013405686&partnerID=MN8TOARS.
  161. Roberts, P.M.S.; Mitchell, G.R.; Davis, F.J.; Pople, J.A.. "Mechanical switching and soft elasticity in liquid crystal elastomers". Molecular Crystals and Liquid Crystals Science and Technology Section A: Molecular Crystals and Liquid Crystals 299 (1997): 181-186. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030679349&partnerID=MN8TOARS.
  162. Roberts, P.M.S.; Mitchell, G.R.; Davis, F.J.. "A single director switching mode for monodomain liquid crystal elastomers". Journal de Physique I 7 10 (1997): 1337-1351. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031245578&partnerID=MN8TOARS.
  163. Legge, C.H.; Mitchell, G.R.. "Photo sensitive phase behaviour of mixtures of 4-cyano-4'-n-pentylbiphenyland a non-mesogenic chromophore methyl ß-(1 -naphthyl)propenoate". Molecular Crystals and Liquid Crystals Science and Technology Section A: Molecular Crystals and Liquid Crystals 281 (1996): 1-14. http://www.scopus.com/inward/record.url?eid=2-s2.0-4243112014&partnerID=MN8TOARS.
  164. Davis, F.J.; Mitchell, G.R.. "Liquid crystal elastomers: Controlled crosslinking in the liquid crystal phase". Polymer 37 8 (1996): 1345-1351. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030129012&partnerID=MN8TOARS.
    10.1016/0032-3861(96)81131-1
  165. Rosi-Schwartz, B.; Mitchell, G.R.. "Extracting and validating force fields for disordered polymeric materials from neutron scattering data". Philosophical Magazine B: Physics of Condensed Matter; Statistical Mechanics, Electronic, Optical and Magnetic Properties 73 1 (1996): 153-161. http://www.scopus.com/inward/record.url?eid=2-s2.0-0011559813&partnerID=MN8TOARS.
  166. Rosi-Schwartz, B.; Mitchell, G.R.. "Extracting force fields for disordered polymeric materials from neutron scattering data". Polymer 37 10 (1996): 1857-1870. http://www.scopus.com/inward/record.url?eid=2-s2.0-0029702771&partnerID=MN8TOARS.
    10.1016/0032-3861(96)87302-2
  167. Keates, P.A.; Mitchell, G.R.; Peuvrel-Disdier, E.; Navard, P.. "Time-resolved in situ X-ray scattering studies of aqueous hydroxypropylcellulose solutions". Polymer 37 6 (1996): 893-901. http://www.scopus.com/inward/record.url?eid=2-s2.0-0000867755&partnerID=MN8TOARS.
    10.1016/0032-3861(96)87271-5
  168. Mitchell, G.R.; Andresen, E.; Keates, P.; Pople, J.A.. "Flow behaviour of liquid crystal polymers as revealed by X-ray rheology". American Chemical Society, Polymer Preprints, Division of Polymer Chemistry 37 1 (1996): 760-761. http://www.scopus.com/inward/record.url?eid=2-s2.0-3242855168&partnerID=MN8TOARS.
  169. Mitchell, G.R.; Ahn, K.-H.; Davis, F.J.; Guo, W.; Hasson, C.D.; Keates, P.A.; Roberts, P.M.; Symons, A.J.. "Preparation and properties of single domain liquid crystal elastomers". American Chemical Society, Polymer Preprints, Division of Polymer Chemistry 37 1 (1996): 48-49. http://www.scopus.com/inward/record.url?eid=2-s2.0-3242831846&partnerID=MN8TOARS.
  170. Smith, Mark A.; King, Nick R.; Mitchell, Geoffrey R.; O'Leary, Sean V.. "Multiple grating formation in photorefractive polymers with azo-dye chromophores". Proceedings of SPIE - The International Society for Optical Engineering 2850 (1996): 14-21. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030372239&partnerID=MN8TOARS.
  171. Whale, E.A.; Davis, F.J.; Mitchell, G.R.. "Liquid crystal polymers copolymers and elastomers containing a laterally attached mesogenic unit". Journal of Materials Chemistry 6 9 (1996): 1479-1485. http://www.scopus.com/inward/record.url?eid=2-s2.0-0347437592&partnerID=MN8TOARS.
  172. Pople, J.A.; Mitchell, G.R.; Chai, C.K.. "In-situ time-resolving wide-angle X-ray scattering study of crystallization from sheared polyethylene melts". Polymer 37 18 (1996): 4187-4191. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030242514&partnerID=MN8TOARS.
    10.1016/0032-3861(96)00264-9
  173. He, Z.; Davis, F.J.; Mitchell, G.R.. "Influence of side-chain bearing units on the phase behaviour of a series of copoly(ester ether)s". European Polymer Journal 32 6 (1996): 735-746. http://www.scopus.com/inward/record.url?eid=2-s2.0-0005579350&partnerID=MN8TOARS.
    10.1016/0014-3057(95)00183-2
  174. Rosi-Schwartz, Barbara; Mitchell, Geoffrey R.. "Interplay between the chain stiffness and the local structure of fluorine containing polymers in the melt". Physica Scripta T T57 (1995): 161-167. http://www.scopus.com/inward/record.url?eid=2-s2.0-0029238127&partnerID=MN8TOARS.
    10.1088/0031-8949/1995/T57/028
  175. del Val, J.J.; Colmenero, J.; Rosi, B.; Mitchell, G.R.. "X-ray diffraction study of the influence of temperature on the structural correlations of poly(2-hydroxypropyl ether of bisphenol A)". Polymer 36 19 (1995): 3625-3631. http://www.scopus.com/inward/record.url?eid=2-s2.0-0000281807&partnerID=MN8TOARS.
  176. Rosi-Schwartz, B.; Mitchell, G.R.. "Extracting quantitative structural parameters for disordered polymers from neutron scattering data". Nuclear Inst. and Methods in Physics Research, A 354 1 (1995): 17-29. http://www.scopus.com/inward/record.url?eid=2-s2.0-0041635377&partnerID=MN8TOARS.
  177. Ward, D.J.; Mitchell, G.R.. "Modelling the structure of a polymer glass poly(methyl methacrylate) through neutron scattering experiments". Physica Scripta T T57 (1995): 153-160. http://www.scopus.com/inward/record.url?eid=2-s2.0-0029224427&partnerID=MN8TOARS.
    10.1088/0031-8949/1995/T57/027
  178. Hamdan, S.; Anuar, K.; Mitchell, G.R.. "A lamellar liquid crystal with a vegetable oil". Journal of the American Oil Chemists’ Society 72 1 (1995): 109-113. http://www.scopus.com/inward/record.url?eid=2-s2.0-3342941142&partnerID=MN8TOARS.
    10.1007/BF02635787
  179. Rosi-Schwartz, B.; Mitchell, G.R.. "A complete atomistic model of molten polyethylene from neutron scattering data: a new methodology for polymer structure". Polymer 35 25 (1994): 5398-5407. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028715353&partnerID=MN8TOARS.
  180. Husain, Tasnim; Mitchell, Geoffrey R.; Gilbert, Andrew. "Influence of solvents and polymer matrices on the photoinduced isomerization of an azobenzene chromophore". Molecular Crystals and Liquid Crystals Science and Technology Section A: Molecular Crystals and Liquid Crystals 246 (1994): 311-314. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028697985&partnerID=MN8TOARS.
    10.1080/10587259408037834
  181. Alegría, A.; Echave, J.M.; Davis, F.J.; Guo, W.; Mitchell, G.R.. "Dielectric relaxation around the nematic-isotropic transition of liquid crystalline polymers". Journal of Non-Crystalline Solids 172-174 PART 2 (1994): 966-971. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028497716&partnerID=MN8TOARS.
  182. He, Z.; Davis, F.J.; Mitchell, G.R.. "High performance polymers prepared by transformation of processable polyamides". Polymer 35 10 (1994): 2218-2221. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028094141&partnerID=MN8TOARS.
  183. He, Z.; Mitchell, G.R.. "Crystallization of random aromatic copolyesters containing flexible spacer chains and side-groups". Polymer 35 6 (1994): 1322-1325. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028387965&partnerID=MN8TOARS.
  184. Kassim, A.; Davis, F.J.; Mitchell, G.R.. "The role of the counter-ion during electropolymerization of polypyrrole-camphor sulfonate films". Synthetic Metals 62 1 (1994): 41-47. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028253119&partnerID=MN8TOARS.
  185. Guo, W.; Mitchell, G.R.. "A study of the phase behaviour of blends of side-chain liquid crystal polymers". Polymer 35 17 (1994): 3706-3711. http://www.scopus.com/inward/record.url?eid=2-s2.0-0000267584&partnerID=MN8TOARS.
  186. Guo, W.; Davis, F.J.; Mitchell, G.R.. "Side-chain liquid-crystal copolymers and elastomers with a null coupling between the polymer backbone and the mesogenic groups". Polymer 35 14 (1994): 2952-2961. http://www.scopus.com/inward/record.url?eid=2-s2.0-0000329177&partnerID=MN8TOARS.
  187. Rosi-Schwartz, B.; Mitchell, G.R.. "A detailed single chain model for molten poly(tetrafluoroethylene) from a novel structure refinement technique on neutron scattering data". Polymer 35 15 (1994): 3139-3148. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028463714&partnerID=MN8TOARS.
  188. Keates, P.; Mitchell, G.R.; Peuvrel-Disdier, E.; Riti, J.B.; Navard, P.. "A novel X-ray rheometer for in situ studies of polymer melts and solutions during shear flow". Journal of Non-Newtonian Fluid Mechanics 52 2 (1994): 197-215. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028431273&partnerID=MN8TOARS.
  189. Blanchard, P.M.; Mitchell, G.R.. "Localized room temperature photo-induced poling of azo-dye-doped polymer films for second-order nonlinear optical phenomena". Journal of Physics D: Applied Physics 26 3 (1993): 500-503. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027560855&partnerID=MN8TOARS.
    10.1088/0022-3727/26/3/026
  190. Whitcombe, M.J.; Gilbert, A.; Mitchell, G.R.. "The photo-Fries rearrangement in a side-chain liquid-crystalline polymer". Polymer 34 7 (1993): 1347-1353. http://www.scopus.com/inward/record.url?eid=2-s2.0-0005329056&partnerID=MN8TOARS.
  191. Blanchard, P.M.; Gilbert, A.; Mitchell, G.R.. "Photoinduced protonation of azo dyes in halogenated solvents and polymers". Journal of Materials Chemistry 3 10 (1993): 1015-1018. http://www.scopus.com/inward/record.url?eid=2-s2.0-0013186109&partnerID=MN8TOARS.
  192. Mohajerani, E.; Mitchell, G.R.. "Temperature optimisation of optical phase conjugation in dye doped polymer films". Optics Communications 97 5-6 (1993): 388-396. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027579397&partnerID=MN8TOARS.
  193. Pratt, F.L.; Hayes, W.; Mitchell, G.R.; Rossi, B.; Kiani, M.S.; Malhotra, B.D.; Pandey, S.S.; Milton, A.; Monkman, A.P.. "Muon studies of conducting polymers". Synthetic Metals 55 1 (1993): 677-684. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027555622&partnerID=MN8TOARS.
  194. Kiani, M.S.; Mitchell, G.R.. "Isotropic electrical conductivity in structurally anisotropic electrochemically prepared polypyrrole films". Journal of Physics D: Applied Physics 26 10 (1993): 1718-1721. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027680416&partnerID=MN8TOARS.
    10.1088/0022-3727/26/10/025
  195. Blanchard, P.M.; Mitchell, G.R.. "A comparison of photoinduced poling and thermal poling of azo-dye-doped polymer films for second order nonlinear optical applications". Applied Physics Letters 63 15 (1993): 2038-2040. http://www.scopus.com/inward/record.url?eid=2-s2.0-36449002300&partnerID=MN8TOARS.
    10.1063/1.110584
  196. Mitchell, G.R.; Davis, F.J.; Guo, W.. "Strain-induced transitions in liquid-crystal elastomers". Physical Review Letters 71 18 (1993): 2947-2950. http://www.scopus.com/inward/record.url?eid=2-s2.0-0000830925&partnerID=MN8TOARS.
    10.1103/PhysRevLett.71.2947
  197. Al-Ammar, K.H.; Whitcombe, M.J.; Mitchell, G.R.. "The effect of the molecular weight on the electro-optic properties of methacrylate-based side-chain liquid crystal polymers". Polymer 34 10 (1993): 2060-2064. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027602453&partnerID=MN8TOARS.
  198. Keates, P.; Mitchell, G.R.; Peuvrel-Disdier, E.; Navard, P.. "In situ X-ray scattering study of anisotropic solutions of hydroxypropylcellulose subjected to shear flow". Polymer 34 6 (1993): 1316-1319. http://www.scopus.com/inward/record.url?eid=2-s2.0-0040037156&partnerID=MN8TOARS.
  199. Symons, A.J.; Davis, F.J.; Mitchell, G.R.. "Liquid crystal elastomers: Interaction between the network and smectic ordering". Liquid Crystals 14 3 (1993): 853-860. http://www.scopus.com/inward/record.url?eid=2-s2.0-0011051652&partnerID=MN8TOARS.
    10.1080/02678299308027762
  200. Langley, P.J.; Davis, F.J.; Mitchell, G.R.. "Synthetic routes to polypyrroles with pendant mesogenic groups". Molecular Crystals and Liquid Crystals Science and Technology. Section A. Molecular Crystals and Liquid Crystals 236 1 (1993): 225-230. http://www.scopus.com/inward/record.url?eid=2-s2.0-84963255767&partnerID=MN8TOARS.
    10.1080/10587259308055232
  201. Mitchell, G.R.; Rosi-Schwartz, B.. "The local structure of molten poly(tetrafluoroethylene)". Physica B: Physics of Condensed Matter 180-181 PART 1 (1992): 558-560. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027108851&partnerID=MN8TOARS.
  202. Rosi-Schwartz, B.; Mitchell, G.R.; Soper, A.K.. "Neutron scattering from hydrogenous polymers". Physica B: Physics of Condensed Matter 180-181 PART 1 (1992): 561-563. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027108897&partnerID=MN8TOARS.
  203. Kilcoyne, S.H.; Mitchell, G.R.; Cywinski, R.. "Temperature dependent SANS from ferritin and apoferritin". Physica B: Physics of Condensed Matter 180-181 PART 2 (1992): 767-769. http://www.scopus.com/inward/record.url?eid=2-s2.0-0000544514&partnerID=MN8TOARS.
  204. Rosi-Schwartz, B.; Blackman, J.A.; Mitchell, G.R.; Mayers, J.. "Hydrogen momentum distribution in rigid chain polymers". Physica B: Physics of Condensed Matter 180-181 PART 2 (1992): 729-731. http://www.scopus.com/inward/record.url?eid=2-s2.0-44049118417&partnerID=MN8TOARS.
  205. Rosi-Schwartz, B.; Mitchell, G.R.; Soper, A.K.. "A new approach to neutron scattering for non-crystalline hydrogenous polymers". Polymer 33 17 (1992): 3744-3747. http://www.scopus.com/inward/record.url?eid=2-s2.0-3943109746&partnerID=MN8TOARS.
  206. Mohajerani, E.; Whale, E.; Mitchell, G.R.. "Polarisation sensitive optical phase conjugation in novel polymer films". Optics Communications 92 4-6 (1992): 403-410. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026926975&partnerID=MN8TOARS.
  207. Kiani, M.S.; Mitchell, G.R.. "The role of the counter-ion in the preparation of polypyrrole films with enhanced properties using a pulsed electrochemical potential". Synthetic Metals 48 2 (1992): 203-218. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026899518&partnerID=MN8TOARS.
  208. Whitcombe, M.J.; Gilbert, A.; Mitchell, G.R.. "Synthesis and photochemistry of side-chain liquid crystal polymers based on cinnamate esters". Journal of Polymer Science, Part A: Polymer Chemistry 30 8 (1992): 1681-1691. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026896627&partnerID=MN8TOARS.
    10.1002/pola.1992.080300821
  209. Kiani, M.S.; Bhat, N.V.; Davis, F.J.; Mitchell, G.R.. "Highly anisotropic electrically conducting films based on polypyrrole". Polymer 33 19 (1992): 4113-4120. http://www.scopus.com/inward/record.url?eid=2-s2.0-0012279841&partnerID=MN8TOARS.
  210. Keates, P.; Mitchell, G.R.; Peuvrel, E.. "Local structural correlations in anisotropic aqueous solutions of hydroxypropyl cellulose". Polymer 33 15 (1992): 3298-3301. http://www.scopus.com/inward/record.url?eid=2-s2.0-0041970672&partnerID=MN8TOARS.
  211. Rosi-Schwartz, B.; Blackman, J.A.; Mitchell, G.R.; Mayers, J.. "Hydrogen momentum distribution in anisotropic rigid-chain polymers". Journal of Physics: Condensed Matter 4 26 (1992): 5665-5674. http://www.scopus.com/inward/record.url?eid=2-s2.0-0010298872&partnerID=MN8TOARS.
    10.1088/0953-8984/4/26/002
  212. Al-Ammar, K.H.; Mitchell, G.R.. "Electro-optical properties of liquid crystal copolymers and their relationship to structural order". Polymer 33 1 (1992): 11-21. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026765796&partnerID=MN8TOARS.
  213. Mitchell, G.R.; Guo, W.; Davis, F.J.. "Liquid crystal elastomers based upon cellulose derivatives". Polymer 33 1 (1992): 68-74. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026626930&partnerID=MN8TOARS.
  214. Kassim, A.; Block, H.; Davis, F.J.; Mitchell, G.R.. "Anisotropic films of polypyrrole formed electrochemically using a non-planar dopant". Journal of Materials Chemistry 2 9 (1992): 987-988. http://www.scopus.com/inward/record.url?eid=2-s2.0-0346807006&partnerID=MN8TOARS.
  215. Mohajerani, E.; Gilbert, A.; Mitchell, G.R.. "Stability of NLO chromophores in doped polymer films during electric field poling". Journal of Physics D: Applied Physics 25 9 (1992): 1304-1310. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026927769&partnerID=MN8TOARS.
    10.1088/0022-3727/25/9/004
  216. Mitchell, G.R.; Cywinski, R.. "Exploitation of a pulsed neutron source for the structural study of anisotropic polymer films". Journal of Materials Science 27 8 (1992): 2117-2123. http://www.scopus.com/inward/record.url?eid=2-s2.0-34249831377&partnerID=MN8TOARS.
    10.1007/BF01117925
  217. Kiani, M.S.; Mitchell, G.R.. "Structure property relationships in electrically conducting copolymers formed from pyrrole and N-methyl pyrrole". Synthetic Metals 46 3 (1992): 293-306. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026838375&partnerID=MN8TOARS.
  218. Legge, C.H.; Mitchell, G.R.. "Photo-induced phase transitions in azobenzene-doped liquid crystals". Journal of Physics D: Applied Physics 25 3 (1992): 492-499. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026836805&partnerID=MN8TOARS.
    10.1088/0022-3727/25/3/024
  219. Guo, W.; Davis, F.J.; Mitchell, G.R.. "Side-chain liquid crystal copolymer system with mesogenic units of opposite sense couplings". Polymer communications Guildford 32 9 (1991): 268-271. http://www.scopus.com/inward/record.url?eid=2-s2.0-0025725722&partnerID=MN8TOARS.
  220. Whitcombe, M.J.; Davis, F.J.; Gilbert, A.; Mitchell, G.R.. "Convenient synthesis of a liquid crystalline polyacrylate with a tetramethylene spacer". Polymer communications Guildford 32 12 (1991): 380-381. http://www.scopus.com/inward/record.url?eid=2-s2.0-0025839852&partnerID=MN8TOARS.
  221. Legge, C.H.; Whitcombe, M.J.; Gilbert, A.; Mitchell, G.R.. "Photoinduced phase transitions in novel liquid-crystalline copolymers". Journal of Materials Chemistry 1 2 (1991): 303-304. http://www.scopus.com/inward/record.url?eid=2-s2.0-0003393696&partnerID=MN8TOARS.
  222. Mitchell, G.R.; Davis, F.J.; Guo, W.; Cywinski, R.. "Coupling between mesogenic units and polymer backbone in side-chain liquid crystal polymers and elastomers". Polymer 32 8 (1991): 1347-1353. http://www.scopus.com/inward/record.url?eid=2-s2.0-0025839658&partnerID=MN8TOARS.
  223. Pratt, F.L.; Mitchell, G.R.; Cox, S.F.J.; Scott, C.A.; Hayes, W.. "Longitudinal muon spin relaxation in the organic metal polypyrrole". Hyperfine Interactions 65 1-4 (1991): 847-853. http://www.scopus.com/inward/record.url?eid=2-s2.0-6444240065&partnerID=MN8TOARS.
    10.1007/BF02397737
  224. Whitcombe, M.J.; Gilbert, A.; Hirai, A.; Mitchell, G.R.. "Cinnamate ester containing liquid crystalline side chain polymers". Journal of Polymer Science, Part A: Polymer Chemistry 29 2 (1991): 251-259. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026106438&partnerID=MN8TOARS.
    10.1002/pola.1991.080290213
  225. Barley, S.H.; Gilbert, A.; Mitchell, G.R.. "Photoinduced reversible refractive-index changes in tailored siloxane-based polymers". Journal of Materials Chemistry 1 3 (1991): 481-482. http://www.scopus.com/inward/record.url?eid=2-s2.0-0001463524&partnerID=MN8TOARS.
  226. Mitchell, Geoffrey. "British Liquid Crystal Society Annual Conference, 1991 Reading, UK". (1991): http://dx.doi.org/10.1080/13583149108628576.
    10.1080/13583149108628576
  227. Mitchell, G.R.; Proctor, A.D.; Gilbert, A.. "Local structure of random copolymers based upon methymethacrylate and styrene". Journal of polymer science. Part C, Polymer letters 28 13 (1990): 423-429. http://www.scopus.com/inward/record.url?eid=2-s2.0-0025595375&partnerID=MN8TOARS.
    10.1002/pol.1990.140281305
  228. Mitchell, G.R.; Davis, F.J.; Kiani, M.S.. "Influence of synthesis on the structure of electrochemically prepared electrically conducting polymers". British Polymer Journal 23 1-2 (1990): 157-164. http://www.scopus.com/inward/record.url?eid=2-s2.0-0025622107&partnerID=MN8TOARS.
  229. Davis, Frederick J.; Gilbert, Andrew; Mann, John; Mitchell, Geoffrey R.. "Liquid crystal elastomers. Synthesis and characterization". Journal of Polymer Science, Part A: Polymer Chemistry 28 6 (1990): 1455-1472. http://www.scopus.com/inward/record.url?eid=2-s2.0-0025430547&partnerID=MN8TOARS.
    10.1002/pola.1990.080280613
  230. He, Z.; Whitcombe, M.J.; Mitchell, G.R.. "Synthesis and phase behaviour of aromatic poly(esteramide)s". British Polymer Journal 23 1-2 (1990): 41-46. http://www.scopus.com/inward/record.url?eid=2-s2.0-0025670911&partnerID=MN8TOARS.
  231. Whitcombe, Michael J.; Gilbert, Andrew; Mitchell, Geoffrey R.. "Approaches to the synthesis of novel photoactive side chain liquid crystalline polymers containing analogues of the cinnamate ester group". British Polymer Journal 23 1-2 (1990): 77-82. http://www.scopus.com/inward/record.url?eid=2-s2.0-0025595342&partnerID=MN8TOARS.
  232. Mitchell, G.R.; Davis, F.J.; Cywinski, R.; Hannon, A.C.. "Structural studies of electrically conducting films of polypyrrole using neutron scattering". Polymer communications Guildford 30 4 (1989): 98-101. http://www.scopus.com/inward/record.url?eid=2-s2.0-0024650017&partnerID=MN8TOARS.
  233. Mitchell, G.R.; Cywinski, R.; Mondal, S.; Sutton, S.J.. "Influence of molecular organisation on charge transport in electrochemically prepared polypyrrole films". Journal of Physics D: Applied Physics 22 8 (1989): 1231-1234. http://www.scopus.com/inward/record.url?eid=2-s2.0-0024715137&partnerID=MN8TOARS.
    10.1088/0022-3727/22/8/034
  234. Mitchell, G.R.; Davis, F.J.; Legge, C.H.. "The effect of dopant molecules on the molecular order of electrically-conducting films of polypyrrole". Synthetic Metals 26 3 (1988): 247-257. http://www.scopus.com/inward/record.url?eid=2-s2.0-0024107742&partnerID=MN8TOARS.
  235. Mitchell, G.R.; Davis, F.J.; Cywinski, R.; Howells, W.S.. "Neutron scattering study of electrically conducting films of polypyrrole". Journal of Physics C: Solid State Physics 21 13 (1988): http://www.scopus.com/inward/record.url?eid=2-s2.0-0041384247&partnerID=MN8TOARS.
    10.1088/0022-3719/21/13/001
  236. Mitchell, G.R.; Geri, A.. "Molecular organisation of electrochemically prepared conducting polypyrrole films". Journal of Physics D: Applied Physics 20 11 (1987): 1346-1353. http://www.scopus.com/inward/record.url?eid=2-s2.0-0023456214&partnerID=MN8TOARS.
    10.1088/0022-3727/20/11/002
  237. Mitchell, G.R.; Davis, F.J.; Ashman, A.. "Structural studies of side-chain liquid crystal polymers and elastomers". Polymer 28 4 (1987): 639-647. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022705752&partnerID=MN8TOARS.
  238. Davis, F.J.; Mitchell, G.R.. "MECHANICALLY INDUCED MOLECULAR SWITCHING IN LIQUID-CRYSTAL ELASTOMERS.". Polymer communications Guildford 28 1 (1986): 8-11. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022463066&partnerID=MN8TOARS.
  239. Davis, F.J.; Gilbert, A.; Mann, J.; Mitchell, G.R.. "The synthesis and properties of liquid crystal elastomers". Journal of the Chemical Society, Chemical Communications 17 (1986): 1333-1334. http://www.scopus.com/inward/record.url?eid=2-s2.0-37049078228&partnerID=MN8TOARS.
  240. Mitchell, G.R.. "MOLECULAR ANISOTROPY IN POLYPYRROLE-BASED CONDUCTING FILMS.". Polymer communications Guildford 27 12 (1986): 346-349. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022900537&partnerID=MN8TOARS.
  241. Takase, Yoshihiko; Mitchell, Geoffrey R.; Odajima, Akira. "DIELECTRIC BEHAVIOUR OF RIGID-CHAIN THERMOTROPIC COPOLYESTERS.". Polymer communications Guildford 27 3 (1986): 76-78. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022676315&partnerID=MN8TOARS.
  242. Chiellini, E.; Samulski, E.T.; Berry, G.C.; Chapoy, L.L.; Meyer, R.B.; Jackson, W.J.; Blumstein, R.B.; et al. "General discussion". Faraday Discussions of the Chemical Society 79 (1985): 85-123. http://www.scopus.com/inward/record.url?eid=2-s2.0-37049110401&partnerID=MN8TOARS.
    10.1039/DC9857900085
  243. Mitchell, G.R.; Brown, D.J.; Windle, A.H.. "The interpretation of orientation - strain relationships in rubbers and thermoplastics". Polymer 26 12 (1985): 1755-1762. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022151268&partnerID=MN8TOARS.
  244. Mitchell, G.R.; Windle, A.H.. "LOCAL STRUCTURE OF BLENDS OF POLYSTYRENE AND POLY(2,6-DIMETHYLPHENYLENE OXIDE).". Journal of polymer science. Part A-2, Polymer physics 23 9 (1985): 1967-1974. http://www.scopus.com/inward/record.url?eid=2-s2.0-0042615359&partnerID=MN8TOARS.
  245. Mitchell, G.R.; Windle, A.H.. "The effect of annealing on the local structure of glassy polycarbonate". Colloid & Polymer Science 263 4 (1985): 280-285. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022045724&partnerID=MN8TOARS.
    10.1007/BF01412242
  246. Windle, A.H.; Viney, C.; Golombok, R.; Donald, A.M.; Mitchell, G.R.. "Molecular correlation in thermotropic copolyesters". Faraday Discussions of the Chemical Society 79 (1985): 55-72. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022279525&partnerID=MN8TOARS.
    10.1039/DC9857900055
  247. Mitchell, G.R.. "DEVELOPMENT OF MOLECULAR ORIENTATION IN NON-CRYSTALLINE POLYMERS.". (1985): http://www.scopus.com/inward/record.url?eid=2-s2.0-0022199024&partnerID=MN8TOARS.
  248. Mitchell, G.R.; Windle, A.H.. "Diffraction from thermotropic copolyester molecules". Colloid & Polymer Science 263 3 (1985): 230-244. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022025820&partnerID=MN8TOARS.
    10.1007/BF01415509
  249. Mitchell, Geoffrey R.; Ishii, Fumiaki. "N. M. R. STUDY OF THE CHAIN ORIENTATION AND MOLECULAR MOTIONS IN RIGID-CHAIN THERMOTROPIC COPOLYESTERS.". Polymer communications Guildford 26 2 (1985): 34-38. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022011625&partnerID=MN8TOARS.
  250. Kléman, M.; Coles, H.J.; Meyer, R.B.; Berry, G.C.; Singer, L.S.; FloryP.J.; Krigbaum, W.R.; et al. "General discussion". Faraday Discussions of the Chemical Society 79 (1985): 175-190. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038436614&partnerID=MN8TOARS.
    10.1039/DC9857900175
  251. Mitchell, G.R.; Windle, A.H.. "Structure of polystyrene glasses". Polymer 25 7 (1984): 906-920. http://www.scopus.com/inward/record.url?eid=2-s2.0-0021464688&partnerID=MN8TOARS.
  252. Mitchell, Geoffrey R.. "ORIENTATION-STRAIN BEHAVIOUR OF CROSSLINKED RUBBERS.". British Polymer Journal 17 2 (1984): 111-115. http://www.scopus.com/inward/record.url?eid=2-s2.0-0021439988&partnerID=MN8TOARS.
    10.1002/pi.4980170204
  253. Mitchell, G.R.; Windle, A.H.. "SPECIAL CORRELATIONS IN NON-CRYSTALLINE POLYMERS.". Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Material 51 (1984): http://www.scopus.com/inward/record.url?eid=2-s2.0-0021587577&partnerID=MN8TOARS.
  254. Donald, A.M.; Mitchell, G.R.; Windle, A.H.. "DIFFRACTION FROM THERMOTROPIC LIQUID CRYSTALLINE POLYMERS.". Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Material 51 (1984): http://www.scopus.com/inward/record.url?eid=2-s2.0-0021600003&partnerID=MN8TOARS.
  255. Mitchell, G.R.; Windle, A.H.. "APPLICATION OF SPHERICAL HARMONICS TO ORIENTED NON-CRYSTALLINE AND LIQUID CRYSTALLINE POLYMERS.". Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Material 51 (1984): http://www.scopus.com/inward/record.url?eid=2-s2.0-0021600446&partnerID=MN8TOARS.
  256. Mitchell, G.R.. "A wide-angle X-ray study of the development of molecular orientation in crosslinked natural rubber". Polymer 25 11 (1984): 1562-1572. http://www.scopus.com/inward/record.url?eid=2-s2.0-0021523110&partnerID=MN8TOARS.
  257. Odajima, A.; Mitchell, G.R.; Yoda, O.. "LOCAL MOLECULAR ORGANIZATION IN ORIENTED NON-CRYSTALLINE POLYMERS.". Polymeric Materials Science and Engineering, Proceedings of the ACS Division of Polymeric Material 51 (1984): http://www.scopus.com/inward/record.url?eid=2-s2.0-0021581922&partnerID=MN8TOARS.
  258. Mitchell, Geoffrey R.; Odajima, Akira. "LOCAL CONFORMATION OF POLY(DIMETHYLSILOXANE).". Polymer Journal 16 4 (1984): 351-357. http://www.scopus.com/inward/record.url?eid=2-s2.0-0021588710&partnerID=MN8TOARS.
    10.1295/polymj.16.351
  259. Odajima, Akira; Mitchell, Geoffrey R. "trans-gauche Energy Difference in Molecular Chains of Vinylidene Fluoride/Trifluoroethylene Copolymers in the Paraelectric Phase". (1984): http://dx.doi.org/10.1295/polymj.16.587.
    10.1295/polymj.16.587
  260. Mitchell, Geoffrey R; Odajima, Akira. "The Local Conformation of Poly(dimethylsiloxane)". (1984): http://dx.doi.org/10.1295/polymj.16.351.
    10.1295/polymj.16.351
  261. Mitchell, G.R.; Pick, M.; Windle, A.H.. "DEVELOPMENT OF MOLECULAR ORIENTATION IN THE PLANE STRAIN COMPRESSION OF PMMA.". Polymer Communications (Guildford, England) 24 1 (1983): 16-18. http://www.scopus.com/inward/record.url?eid=2-s2.0-0020496129&partnerID=MN8TOARS.
  262. Viney, C.; Mitchell, G.R.; Windle, A.H.. "OPTICAL MICROSTRUCTURE OF ORIENTED LIQUID CRYSTAL POLYMERS.". Polymer Communications (Guildford, England) 24 5 (1983): 145-146. http://www.scopus.com/inward/record.url?eid=2-s2.0-0020756619&partnerID=MN8TOARS.
  263. Mitchell, G.R.; Windle, A.H.. "The determination of molecular orientation in uniaxially compressed PMMA by X-ray scattering". Polymer 24 3 (1983): 285-290. http://www.scopus.com/inward/record.url?eid=2-s2.0-0020720657&partnerID=MN8TOARS.
  264. Jones, T.P.H.; Mitchell, G.R.; Windle, A.H.. "Glassy poly(p-phenylene sulphide): determination of the local structure". Colloid & Polymer Science 261 2 (1983): 110-120. http://www.scopus.com/inward/record.url?eid=2-s2.0-0020708260&partnerID=MN8TOARS.
    10.1007/BF01410689
  265. Mitchell, G.R.; Windle, A.H.. "Measurement of molecular orientation in thermotropic liquid crystalline polymers". (1983): http://www.scopus.com/inward/record.url?eid=2-s2.0-17044459410&partnerID=MN8TOARS.
  266. Brown, D.J.; Mitchell, G.R.. "MOLECULAR ORIENTATION IN PMMA UNIAXIALLY DEFORMED ABOVE THE GLASS TRANSITION TEMPERATURE.". Journal of polymer science. Part B, Polymer letters 21 5 (1983): 341-346. http://www.scopus.com/inward/record.url?eid=2-s2.0-0020748980&partnerID=MN8TOARS.
  267. Mitchell, G.R.; Windle, A.H.. "Measurement of molecular orientation in thermotropic liquid crystalline polymers". Polymer 24 12 (1983): 1513-1520. http://www.scopus.com/inward/record.url?eid=2-s2.0-0020879105&partnerID=MN8TOARS.
    10.1016/0032-3861(83)90164-7
  268. Waring, J.R.; Lovell, R.; Mitchell, G.R.; Windle, A.H.. "Radial distribution functions of non-crystalline polymers and their application to the structural analysis of PMMA". Journal of Materials Science 17 4 (1982): 1171-1186. http://www.scopus.com/inward/record.url?eid=2-s2.0-0020114463&partnerID=MN8TOARS.
    10.1007/BF00543538
  269. Mitchell, G.R.; Windle, A.H.. "Structural analysis of an oriented liquid crystalline copolyester". Polymer 23 9 (1982): 1269-1272. http://www.scopus.com/inward/record.url?eid=2-s2.0-0019605263&partnerID=MN8TOARS.
  270. Mitchell, G.R.; Windle, A.H.. "Conformational analysis of oriented non-crystalline polymers using wide angle X-ray scattering". Colloid & Polymer Science 260 8 (1982): 754-761. http://www.scopus.com/inward/record.url?eid=2-s2.0-0020165739&partnerID=MN8TOARS.
    10.1007/BF01452065
  271. Mitchell, G.R.; Lovell, R.; Windle, A.H.. "The local structure of molten polyethylene". Polymer 23 9 (1982): 1273-1285. http://www.scopus.com/inward/record.url?eid=2-s2.0-0019604713&partnerID=MN8TOARS.
  272. Lovell, R.; Mitchell, G.R.. "Molecular orientation distribution derived from an arbitrary reflection". Acta Crystallographica Section A 37 1 (1981): 135-137. http://www.scopus.com/inward/record.url?eid=2-s2.0-0000922179&partnerID=MN8TOARS.
    10.1107/S0567739481000247
  273. Mitchell, G.R.. "Eliminating the small-angle component of the scattering calculated for models". Acta Crystallographica Section A 37 4 (1981): 488-490. http://www.scopus.com/inward/record.url?eid=2-s2.0-4243638419&partnerID=MN8TOARS.
    10.1107/S0567739481001174
  274. Mitchell, G.R.; Lovell, R.. "Application of cylindrical distribution functions to wide-angle X-ray scattering from oriented polymers". Acta Crystallographica Section A 37 2 (1981): 189-196. http://www.scopus.com/inward/record.url?eid=2-s2.0-0040949987&partnerID=MN8TOARS.
    10.1107/S0567739481000478
  275. Mitchell, G.R.; Lovell, R.; Windle, A.H.. "Interpretation of radial distribution functions for non-crystalline polymers". Polymer (United Kingdom) 21 9 (1980): 989-991. http://www.scopus.com/inward/record.url?eid=2-s2.0-60649096910&partnerID=MN8TOARS.
    10.1016/0032-3861(80)90027-0
  276. Dill, K.A.; Frank, F.C.; Dill, A.K.; Sadler, D.M.; DiMarzio, E.A.; Guttman, C.M.; Hoffman, J.D.; et al. "General discussion". Faraday Discussions of the Chemical Society 68 (1979): 104-140. http://www.scopus.com/inward/record.url?eid=2-s2.0-37049098285&partnerID=MN8TOARS.
    10.1039/DC9796800104
  277. Lovell, R.; Mitchell, G.R.; Windle, A.H.. "Wide-angle X-ray scattering study of structural parameters in non-crystalline polymers". Faraday Discussions of the Chemical Society 68 (1979): 46-57. http://www.scopus.com/inward/record.url?eid=2-s2.0-3943075327&partnerID=MN8TOARS.
    10.1039/DC9796800046
  278. Lovell, R.; Mitchell, G.R.; Windle, A.H.. "An improved transformation procedure for radial distribution function analysis". Acta Crystallographica Section A 35 4 (1979): 598-603. http://www.scopus.com/inward/record.url?eid=2-s2.0-4244184306&partnerID=MN8TOARS.
    10.1107/S0567739479001406
Artigo em revista (magazine)
  1. Anabela P. Massano; Daniel Pedrosa da Silva; Gameiro, Fábio; Carreira, Pedro; João Matias; Artur J S Mateus; Geoffrey Robert, Mitchell. "Análise de Difração de Raios X Aplicada à Injecção de Plásticos em Tempo Real", O Molde, 2024
  2. Ana Rita Fonseca; Renato Batista; Artur Mateus; Pascoal-Faria, Paula; Geoffrey Robert, Mitchell. Autor correspondente: Geoffrey Robert, Mitchell. "Circular Seas - The Next Challenge for Plastics", Polymer Sci peer Rev J., 2022, DOI: 10.31031/PSPRJ.2022.03.000551.
Capítulo de livro
  1. Geoffrey Robert, Mitchell. ". Conducting Polymer-Based Flexible Supercapacitor Devices". new York, Estados Unidos: Wiley Scrivener, 2021.
    Aceite para publicação
  2. Kariduraganavar, Mahadevappa Y.; Heggannavar, Geetha B.; Amado, Sandra; Mitchell, Geoffrey R.. "Protein Nanocarriers for Targeted Drug Delivery for Cancer Therapy". In Nanocarriers for Drug Delivery, editado por sabu thomas; Shyam Mohapatra, 173-204. Elsevier, 2019.
    Publicado • 10.1016/b978-0-12-814033-8.00006-0
  3. Mitchell, Geoffrey R.; Davis, Fred J.; Mohan, Saeed; Nazhipkyzy, Meruyert. "Highly Anisotropic Polymer Composites Based on Carbon Nanotubes". editado por Mohammed Muzibur Rahman; Abdullah Mohamed Asiri. Intech, 2018.
    Publicado • 10.5772/intechopen.71533
  4. Geoffrey Robert, Mitchell. "Advanced Materials from the Forests". Springer nature, 2018.
    Publicado
  5. Robert, Mitchell. "Development of Structure and Morphology during Electrospinning". 2014.
    978-1849735568
Edição de livro
  1. Geoffrey Robert, Mitchell. Electrospinning revised 2nd edition. Reino Unido: Royal Society of Chemistry. 2021.
    No prelo • 10.1039/9781849735575 • Editor
  2. Geoffrey Robert, Mitchell; Pascoal-Faria, Paula. Series Editor of the CDRSP Knowledge Series Vol. 7, International Conference on Direct Digital Manufacturing and Polymers 2021. 2021.
    Publicado
  3. Geoffrey Robert, Mitchell; Paula Pascoal-Faria. CDRSP Knowledge Series ¿ The Industrial Challenges of Sustainable Food Packaging. Portugal. 2017.
    Publicado
  4. Geoffrey Robert, Mitchell; Pascoal-Faria, Paula. CDRSP Knowledge Series ¿ Direct Digital Manufacturing for Medicine. Portugal: Polytechnic of Leiria. 2017.
    Publicado
Edição de número de revista
  1. Geoffrey Robert, Mitchell. "Special Issue State-of-the-Art Polymer Science and Technology in Portugal". Polymers (2021): https://www.mdpi.com/journal/polymers.
    No prelo • Co-editor
  2. Geoffrey Robert, Mitchell. "Special issue for invited papers from International Conference of Sustainable and Intelligent Manufacturing RESIM2020". World Review of Science, Technology and Sustainable Manufacturing (Q2) (2021): https://www.inderscience.com/jhome.php?jcode=wrstsd.
    No prelo • Editor
  3. Geoffrey Robert, Mitchell. "Special Issue with Awarded and Shortlisted Papers from the HKIE Outstanding Paper Award for Young Engineers/Researchers 2019". Advanced Materials Research (2021): https://www.scientific.net/AMR.
    No prelo • 10.33430/v26n4 • Editor
  4. Geoffrey Robert, Mitchell. "Special Issue for the Polymer Connect Conference Lisbon 2020". POlymers (2020): https://www.mdpi.com/journal/polymers/special_issues/Polymer_Connect_2020.
    Publicado • Editor
  5. Geoffrey Robert, Mitchell. "Special Issue with Awarded and Shortlisted Papers from the HKIE Outstanding Paper Award for Young Engineers/Researchers 2019". HKIE Transactions 26 4 (2019): http://dx.doi.org/10.33430/v26n4.
    10.33430/v26n4 • Editor
Livro
  1. Kariduraganavar, M.Y.; Heggannavar, G.B.; Pattanashetti, N.A.; Donnimath, N.U.; Mitchell, G.R.. Nanospun membranes developed by electrospinning techniques for drug delivery applications. 2022.
  2. Geoffrey Robert, Mitchell; Mahadevappa Y. Kariduraganavar. Electrospun Fibres a vehicle for Drug Delivery. Países Baixos: Elsevier. 2021.
    No prelo
  3. Torvi, A.I.; Naik, S.R.; Hegde, S.N.; Mulla, M.; Kamble, R.R.; Mitchell, G.R.; Kariduraganavar, M.Y.. Conducting Polymer-Based Flexible Supercapacitor Devices. 2021.
  4. Geoffrey Robert, Mitchell; Vidhura Subash Mahendra; Dora sousa. Rosin – an untapped green resource for the future for Portugal. Portugal: CDRSP Knowledge Series Polytechnic of leiria. 2020.
    Publicado
  5. Mitchell, G.; Gaspar, F.; Mateus, A.; Mahendra, V.; Sousa, D.. Advanced materials from forests. 2019.
  6. Geoffrey R. Mitchell; Nuno Alves; Artur Mateus. Direct Digital Manufacturing and Polymers. 2019.
    10.4028/b-1FYQAn
  7. Kariduraganavar, M.Y.; Heggannavar, G.B.; Amado, S.; Mitchell, G.R.. Protein Nanocarriers for Targeted Drug Delivery for Cancer Therapy. 2018.
  8. Robert, Mitchell. Controlling the Morphology of Polymers. Estados Unidos: Springer International Publishing. 2016.
    Publicado • 10.1007/978-3-319-39322-3 • Editor
  9. Mitchell, G.R.; Davis, F.J.; Olley, R.H.. Scales of structure in polymers. 2016.
  10. Hiremath, C.; Heggannavar, G.B.; Mitchell, G.R.; Kariduraganavar, M.Y.. Biopolymers in drug-delivery applications. 2016.
  11. Auriemma, F.; De Rosa, C.; Di Girolamo, R.; Malafronte, A.; Scoti, M.; Mitchell, G.R.; Esposito, S.. Relationship between molecular configuration and stress-induced phase transitions. 2016.
  12. Mohan, S.; Olley, R.H.; Vaughan, A.S.; Mitchell, G.R.. Evaluating scales of structures. 2016.
  13. Mitchell, G.R.. Summary. 2016.
  14. Mitchell, G.R.; Wangsoub, S.; Nogales, A.; Davis, F.J.; Olley, R.H.. Controlling morphology using low molar mass nucleators. 2016.
  15. Mitchell, G.R.; Duraccio, D.; Khan, I.; Nogales, A.; Olley, R.. Crystallization in nanocomposites. 2016.
  16. Tojeira, A.; Biscaia, S.S.; Viana, T.Q.; Sousa, I.S.; Mitchell, G.R.. Controlling morphology in 3D printing. 2016.
  17. Mitchell, G.R.; Tojeira, A.. Preface. 2016.
  18. Mitchell, G.R.; Mohan, S.D.; Davis, F.J.; Ahn, K.-H.; Al-Azab, M.; El Hadi, A.; Elliott, D.; et al. Structure development in electrospun fibres. 2015.
  19. Song, W.; Mitchell, G.R.; Burugapalli, K.. Electrospinning for medical applications. 2015.
  20. Mitchell, G.R.; Sperrin, M.. Future perspectives on electrospinning. 2015.
  21. Robert, Mitchell. Electrospinning: principles, practice and possibilities. Reino Unido. 2014.
    10.1039/9781849735575
  22. Mitchell, G.R.. Characterization of safe nanostructured polymeric materials. 2013.
  23. Andresen, E.; Mitchell, G.R.. X-ray rheology of liquid crystal polymers. 2013.
  24. Mateus, A.; Bartolo, P.; Mitchell, G.R.. Simulation of reaction injection moulding. 2013.
  25. Mitchell, G.. Rheology: Theory, properties and practical applications. 2013.
  26. Mohan, S.D.; Ahn, K.-H.; Davis, F.J.; Mitchell, G.R.. Electrospinning of polymer solutions. 2013.
  27. Mitchell, G.. Preface. 2013.
  28. Mitchell, G.R.. Neutron Diffraction from Polymers and Other Soft Matter. 2011.
  29. Mitchell, G.R.; Davis, F.. Electrospinning and tissue engineering. 2011.
    10.1007/978-94-007-1254-6_7
  30. Dumitriu, R.; Vasile, C.; Mitchell, G.; Oprea, A.-M.. Stimuli-responsive drug delivery system. 2009.
  31. Davis, F.J.; Mitchell, G.R.. Polyurethane based materials with applications in medical devices. 2008.
Poster em conferência
  1. Anabela P. Massano; Daniel P. da Silva; Matteo Arioli; Geoffrey Robert, Mitchell. "Novel Biobased Composites of Polybutylene succinate with nano-sized carbonaceous fillers". Trabalho apresentado em ENURS 2023 - Encontro Nacional de Utilizadores de Radiação de Sincrotrão, 2023.
  2. Daniel P. da Silva; João Pinheiro; Saba Abdulghani; Christina S Kamma-Lorger; Juan Carlos Martinez; Eduardo Solano; Artur J S Mateus; Pascoal-Faria, Paula; Geoffrey Robert, Mitchell. "Changing the design paradigm - 3D Printing on molecular texture in plastics". Trabalho apresentado em MIT Portugal Annual Conference, 2022.
  3. Daniel P. da Silva; Lamolinara, Barbara; Antão Costa, André; Gameiro, Fábio; Pascoal-Faria, Paula; Artur J S Mateus; Juan Carlos Martinez; et al. "Novel Biaxial Deformation Stage for Natural Rubber for SAXS/WAXS". Trabalho apresentado em X ALBA Users Meeting 2022 - Barcelona, Spain, 2022.
  4. Daniel P. da Silva; João Pinheiro; Saba Abdulghani; Christina S Kamma-Lorger; Juan Carlos Martinez; Eduardo Solano; Artur J S Mateus; Pascoal-Faria, Paula; Geoffrey Robert, Mitchell. "Discovering Morphology Mapping with 3D printing at the NCD-SWEET Beamline at ALBA Synchrotron". Trabalho apresentado em X ALBA Users Meeting 2022 - Barcelona, Spain, 2022.
  5. Lamolinara, Barbara; Artur Mateus; Geoffrey Robert, Mitchell. "Pineapple Leaf Fibres - A Renewable Material Resource for Composites". Trabalho apresentado em International Conference on Advanced Research on Sustainable Intelligent Manufacturing | RESIM 2020, 2020.
  6. Daniel P. da Silva; João Pinheiro; Saba Abdulghani; Christina Kamma-Lorger; Eduardo Solano; Pascoal-Faria, Paula; Geoffrey Robert, Mitchell. "Experimental setup and equipment modelling for in situ morphology SAXS/WAXS measurements of electrospun polymer fibres on the NCD- SWEET Beamline at the ALBA Synchrotron Light Source". 2019.
  7. Nelson Martins-Ferreira; Nuno Manuel Fernandes Alves; Gaspar, Miguel Belbut; Abdulghani, Saba; Geoffrey Robert, Mitchell. "The Universal Printer: the future of DDM". Trabalho apresentado em ICDDMAP 2019, International Conference on Direct Digital Manufacturing and Polymers, Dharwad/Karnatak, India, 2019.

Propriedade Intelectual

Patente
  1. Geoffrey Robert, Mitchell; Daniel P. da Silva; Pascoal-Faria, Paula; Artur J S Mateus. 2023. "Método implementado por computador para o fabrico e otimização morfológica e estrutural de um objeto com propriedades variáveis espacialmente, sistema, programa de computador e meio de leitura associados". Portugal.
    Pendente
  2. Geoffrey Robert, Mitchell. 2019. "MATERIAL COMPOSITE OF DYEING OF RESIN OF PINHEIRO AND VEGETABLE FIBER AND PROCESS OF MANUFACTURE". Portugal.
  3. Cyril dos Santos; Artur J S Mateus; Geoffrey Robert, Mitchell; saeed BRIDGEMOHAN. 2017. "MÉTODO DE FABRICO DIRETO DIGITAL DE NANOCOMPÓSITOS".
  4. Geoffrey Robert, Mitchell; saeed mohan; Mateus, A.. 2016. "Nanofibre composite manufacture". Portugal.
    Concedida/Emitida
  5. Geoffrey Robert, Mitchell. 2007. "Polymeric Compositions". Reino Unido.
    Concedida/Emitida
  6. Geoffrey Robert, Mitchell. 1990. "Polymer Compositions for Optical Space Switching". Reino Unido.
    Concedida/Emitida

Outros

Conjunto de dados
  1. Professor Geoffrey Mitchell; Dr Tom Headen; Dr Sara Gomes; Dr Saeed Mohan; Dr Fred Davis; Dr Tristan Youngs; Dr Artur Mateus. Multiscale time resolving study of the crystallisation of nanofibrils of a molecular gelator ....
    10.5286/isis.e.rb1620344
  2. Dr Fred Davis; Mr Luyi Sun; Professor Geoffrey Mitchell; Dr Saeed Mohan; Dr Steve King. Chain Conformations in Monodisperse/Polydiserpse Electrospinning Solutions ....
    10.5286/isis.e.rb1520373
  3. Professor Geoffrey Mitchell; Mr Tom Gkourmpis; Dr Thomas Gkourmpis; Dr Saeed Mohan; Dr Tristan Youngs; Dr Fred Davis; Dr Artur Mateus. Multiscale time resolving study of the crystallisation of polyethylene from solution ....
    10.5286/isis.e.rb1610464
  4. Dr Fred Davis; Mr Luyi Sun; Professor Geoffrey Mitchell; Dr Saeed Mohan; Dr Steve King. Chain Conformations of Monodisperse PMMA Spinning Solutions ....
    10.5286/isis.e.rb1610431
  5. Professor Geoffrey Mitchell; Mr Robert Olley; Dr Tristan Youngs; Dr Saeed Mohan; Dr Artur Mateus; Dr Fred Davis; Miss Ana Tojeira. Multiscale time resolving study of the crystallisation of polyethylene from solution ....
    10.5286/isis.e.rb1520416
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2020/08/10 Direct Digital Manufacturing The Revolution International Conference on Advanced and Smart Processsing TEchnology
JSS science and Technology University Mysore (Mysore, Índia)
2020/03/26 Program Chair and keynote Lecture “Manufacturing plastic parts with digital definition of the properties at the point of manufacturing – the ultimate digital definition” MATDES 2020
MATDES Journal (Barcelona, Espanha)

Orientação

Título / Tema
Papel desempenhado
Curso (Tipo)
Instituição / Organização
2020/12/01 - 2024/12/01 Marine resources as food material for 3D-printing - innovative strategies to improve the efficiency of fish value chain
Coorientador
Food Science (Doutoramento)
Universidade de Lisboa Departamento de Química e Bioquímica, Portugal
2018/10/01 - 2022/12/31 Polymers for Energy Generation and Storage
Coorientador
Combustion Science (Doutoramento)
Al-Farabi Kazakh National University, Cazaquistão
2018/10/01 - 2022/12/31 Lignin Based Electrospun Fibers
Coorientador
Combustion Science (Doutoramento)
Al-Farabi Kazakh National University, Cazaquistão
2018/01/01 - 2021/12/31 Sea Coat Marine based edible coatings for minimally processed fruit
Coorientador
Food Science (Doutoramento)
University of Reading, Reino Unido
2016/10/01 - 2020/12/31 Electrically conductive nanocomposites for additive manufacturing
Orientador
MATERIALS SCIENCE (Doutoramento)
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
1985/10/01 - 2012/04/01 Prior to joining CDRSP I supervised or co-supervised 42 Masters projects and students
Orientador
Master of Science (Mestrado)
University of Reading, Reino Unido
1985/10/01 - 2012/03/01 Prior to joining CDRSP-ipleiria I was the supervisor and co-supervisor of 51 PhD Students and projects. about 40% of these projects were in partnership with industry. All of the projects were related in polymers, whether as the development of new materials, new phenomena, non'linear optics, conducting polymers, liquid crystal polymers or polymer process.
Orientador
physics (Doutoramento)
University of Reading, Reino Unido
2006/01/01 - 2010/09/06 Biodegradable binary polymer system
Coorientador
MACROMOLECULAR SCIENCE (Doutoramento)
Institutul de Chimie Macromoleculara Petru Poni, Roménia

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação)
Instituição / Organização
2008/03/27 - Atual 75-years-of-polyethylene-past-successes-and-future-challenges. A one-day meeting to mark the 75 years of scientific and technological development since the discovery of polyethylene by Reginald Gibson and Eric Fawcett on 27 March 1933. A series of presentations on the Discovery, Developments and Challenges of polyethylene together with the unique opportunity to visit the Plastics Exhibition in the Science Museum and see the original equipment used by Gibson and Fawcett in the discovery of polyethylene (2008/03/27)
Conferência (Presidente da Comissão Organizadora)
University of Reading, Reino Unido
2020/06/01 - 2025/12/31 INTERNATIONAL MANUFACTURING FORUM SERIES 2021,2022,2023,2024,2025 The International Manufacturing Forum Series (IMFS) is a major initative from the Centre for Rapid and Sustainable Product Development (CDRSP) of the Polytechnic of Leiria in Portugal. This is a twelve day virtual conference spread over 12 months, with a one day conference held on the first thursday of each month. Each one day conference will focus on a specific topic within the broad umbrella of Manufacturing. There will be a particular emphasis on topics related to Industry 4.0 an (2020/06/01 - 2025/12/31)
Conferência (Presidente da Comissão Organizadora)
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2015/01/01 - 2025/12/31 INTERNATIONAL CONFERENCE ON DIRECT DIGITAL MANUFACTURING AND POLYMERS ICDDMAP2021, 2015,2017,2019,2023,2025 The conference provides an innovative environment for the discussion of the emerging technologies associated with direct digital manufacturing, its wide-based applications and the new materials associated with this exciting technology including polymers, ceramics and metals. Direct Digital Manufacturing lies at the heart of Industry 4.0, the so/called 4th Industrial Revolution. This revolution in manufacturing will impact on design on new mat (2015/10/07 - 2025/12/31)
Conferência (Coorganizador)
Instituto Politécnico de Leiria Centro de Investigação em Gestão para a Sustentabilidade, Portugal
2016/05/11 - 2024/12/31 ADVANCED RESEARCH IN INTELLIGENT AND SUSTAINABLE MANUFACTURING RESIM2022, 2016,2020 ,2024, Manufacturing and Climate Change Human-induced climate change Impacts of human-induced climate change Option for adaptation and mitigation Secure, clean and efficient energy mAnufacturing for Secure Societies – Europe in a changing world Innovative and inclusive societies Reflective societies Demographic change Manufacturing for improved health and well-being Rehabilitation and ergonomic systems Biomedical devices, prosthetic and orthos (2012/05/12 - 2025/12/31)
Conferência (Coorganizador)
Instituto Politécnico de Leiria Centro de Investigação em Gestão para a Sustentabilidade, Portugal
2008/03/27 - 2008/03/27 A one-day meeting to mark the 75 years of scientific and technological development since the discovery of polyethylene by Reginald Gibson and Eric Fawcett on 27 March 1933. A series of presentations on the Discovery, Developments and Challenges of polyethylene together with the unique opportunity to visit the Plastics Exhibition in the Science Museum and see the original equipment used by Gibson and Fawcett in the discovery of polyethylene (2008/03/27)
Conferência (Presidente da Comissão Organizadora)
University of Reading, Reino Unido

Participação em evento

Descrição da atividade
Tipo de evento
Nome do evento
Instituição / Organização
2022/04/14 - 2022/04/16 International Conference Polymer Science and Composite Materials Online Conference Chair and Plenary Speaker
Conferência
International Conference Polymer Science and Composite Materials Online

Júri de grau académico

Tema
Tipo de participação
Nome do candidato (Tipo de grau)
Instituição / Organização
1984/01/01 Since commencing my academic career I have served on numerous juries for both Masters and PhD degrees (~90) at major universities in the UK, Italy, Romania, Sweden, Portugal, France, India, Thailand and Spain. I have served as external examiner for A Masters Programme at the University of Cambridge UK, in Computer Modelling of materials, for degrees in Physics at the University of Keele UK. I have also served to review the research output of the University of the West Indies in Physics, at the University Putra Malaysia in Materials Science.
Presidente do júri
Various (Doutoramento)
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Comissão de avaliação

Descrição da atividade
Tipo de assessoria
Instituição / Organização Entidade financiadora
2015/01/01 - 2016/12/31 Evaluator and moderator for the EU MERANET programme
Avaliador
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal European Commission Seventh Framework Programme for Research and Technological Development Socio Economic Sciences and Humanities

Consultoria / Parecer

Descrição da atividade Instituição / Organização
2019/01/01 - 2019/12/31 Providing expert advice on the manufacture and quality control and testing in injection moulding to a manufacturer in Portugal. Developing a model of post-production behaviour to explain whether defects arose from design or production Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Membro de comissão

Descrição da atividade
Tipo de participação
Instituição / Organização
2017/01/01 - Atual NeMPo (Neutrões e Muões em Portugal) For users of neutron and muon facilities in the world who are based in Portugal
Membro
Instituto Politécnico de Leiria Centro de Investigação em Gestão para a Sustentabilidade, Portugal
2012/01/01 - Atual Member of ENURS, SYnchrotron Users from Portugal I have organised the ENURS annual Meeting in 2014 and in 2020 (postponed to 202)
Membro
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2019/02/01 - 2024/02/14 member of executive Committee, Responsible for Internationalisation, Conferences, PI of ALBA projects Resposnible for Morphology Laboratory
Membro
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Distinções

Prémio

2020 Vebleo Scientist Award
Vebleo Organisation, Suécia
2019 Best Presentation at MatDes 2019
1980 The British Telecom Fellowship
BT Group Plc, Reino Unido
1971 Amourers and Brasiers Award
The Worshipful Company of Armourers and Brasiers in teh City of London, Reino Unido

Título

2022 Topic Leader "Innovators in Mechanics of Materials"
Frontiers Media SA, Suiça
2020 Adjunct Professor in Polymer Science and Engineering
JSS Science and Technology University, Índia

Vebleo Organisation, Suécia
2018 Visiting Medical Physicist
Oxford University Hospitals NHS Foundation Trust, Reino Unido
2005 Fellow of the Royal Society for the encouragement of Arts, Manufactures and Commerce
1997 Fellow of the Royal Society of Chemistry
Royal Society of Chemistry, Reino Unido
1995 Fellow of the Institute of Physics

Outra distinção

2023 Editorial Board of Advanced Materials and Sustainable Manufacturing
2023 Editorial Board of Exploration of BioMat-X,
2021 Editorial Board Member Frontiers in Materials
2021 Associate Editor for Mechanics of Materials (specialty section of Frontiers in Materials and Frontiers in Mechanical Engineering)
2020 Editorial Board member for Eng https://www.mdpi.com/journal/eng
2020 Editorial Board member for Journal of Manufacturing and Materials Processing https://www.mdpi.com/journal/jmmp
2019 Editorial Board member for Polymers https://www.mdpi.com/journal/polymers IF=3.426
2016 Editorial Board Member for Current Research in Biopolymers https://gavinpublishers.com/journals/journals_details/Current-Research-in-Biopolymers
2015 Review Editor for mechanics of materials Frontiers in Materials
2008 Editorial Board member for the International Journal of Polymer Science IF=1.892 https://www.hindawi.com/journals/ijps/
1989 Advisory Board Member for High performance Polymers https://journals.sagepub.com/loi/hip IF=1.568