Célio Pina completed his PhD in Biotribology at the University of Leeds (Institute for Medical and Biological Engineering) in 2005 and his degree in Materials Engineering in 1994 at the University of Lisbon (IST). He has been teaching since 1995 and is currently a Senior lecturer at the Setúbal Polytechnic Institute (IPS). He was president of the pedagogical council (until 2018) and coordinator of the Biomedical Technology degree (until 2021), was coordinator of the IPS research centre CDP2T (Centre for Product Development and Technology Transfer) and is currently coordinator of the master's degree in Biomedical Engineering. He has been involved in projects with industry. He has co-authored several articles in journals and conferences procedings . He has supervised several master's students in mechanical and biomedical area and co-supervised one PhD student. He is currently supervising 4 master's students and co-supervising 2 PhD students. His main research interests are tribology; materials development and characterisation; ceramic dental materials; hydrogels (articular cartilage repair) and green materials (for application in the transport sector).
Read full resume ↓

Personal identification

Full name
Célio Gabriel Figueiredo Pina

Citation names

  • C. G. Figueiredo-Pina

Author identifiers

Ciência ID
111C-DF1B-A36F

Email addresses

  • celio.pina@estsetubal.ips.pt (Professional)

Addresses

  • Instituto Politécnico de Setúbal, Escola Superior de Tecnologia de Setúbal, Departamento de Engenharia Mecânica. campus do IPS , Estefanilha , 2910-761, Setúbal, Setúbal, Portugal (Professional)
Degree Classification
2001 - 2005
Concluded
 Eng. Mecânica -Biotribologia (Doutoramento)
University of Leeds, United Kingdom
"Tribology of nitrogen S-phase coated stainless steel for UHMWPE hip joints" (THESIS/DISSERTATION)
 Aprovado
1997 - 1999
Concluded
 Mestrado em Engenharia e Ciência de Superfícies (Mestrado)
Universidade de Lisboa, Portugal
"Contribuição para o estudo da resistência ao desgaste abrasivo do aço AISI 420 tratado por fusão superficial por laser" (THESIS/DISSERTATION)
 Aprovado
1989 - 1994
Concluded
 Eng. Metalúrgica e dos Materiais (Licenciatura)
Universidade de Lisboa, Portugal
 16

Teaching in Higher Education

Category
Host institution 		Employer
2020/11/01 - Current Teacher Coordinator (Polytechnic Teacher) Instituto Politécnico de Setúbal, Portugal
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
1999 - 2020/10/31 Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico de Setúbal, Portugal
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
1995/11/01 - 1999 Assistant (Polytechnic Teacher) Instituto Politécnico de Setúbal, Portugal

Positions / Appointments

Category
Host institution 		Employer
2023/09 - Current Coordenador do Mestrado em Engenharia Biomédica Instituto Politécnico de Setúbal, Portugal
2020/07 - 2023/07 Coordenador do Centro de Desenvolvimento de Produto e Transferência de Tecnologia (Centro de investigação do IPS) Instituto Politécnico de Setúbal, Portugal
Centro de desenvolvimento do produto e transferência de tecnologia, Portugal
2015/10 - 2021/02 Coordenador de Curso de Tecnologia Biomédica Instituto Politécnico de Setúbal, Portugal
2014/10 - 2018/12/31 Coordenador de Curso de Engenharia Biomédica Instituto Politécnico de Setúbal, Portugal
2014/06 - 2018/06 Presidente do Conselho Pedagógico da ESTSetúbal/IPS Instituto Politécnico de Setúbal, Portugal
2010/10 - 2012/09 Coordenador de Curso Adjunto Ramo Biomecânica Instituto Politécnico de Setúbal, Portugal
2007/09 - 2010/02 Membro da Comissão Coordenadora do Conselho Cientifíco Instituto Politécnico de Setúbal, Portugal

Others

Category
Host institution 		Employer
2022/09 - Current Membro do Conselho Técnico-científico da ESTSetúbal Instituto Politécnico de Setúbal, Portugal
2018/10 - 2022/10 Membro do Conselho de Representantes da ESTSetúbal/IPS Instituto Politécnico de Setúbal, Portugal
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2017/06 - 2021/06 Membro do Conselho Geral do IPS Instituto Politécnico de Setúbal, Portugal

Contract

Designation Funders
2022/10 - Current Aero.Next Portugal
2022-C05i0101-02
Researcher
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2020/01 - Current Accurate 3D- Aumento da precisão e caracterização mecânica de peças funcionais impressas 3D para apoio à produção
IPS
Researcher
Instituto Politécnico de Setúbal, Portugal
 Instituto Politécnico de Setúbal
Ongoing
2018/08 - Current Cartilages for hip prosthesis with controlled drug release ability
LISBOA-01-0145-FEDER-029593
Researcher
2018/08/01 - 2022/07/31 Cartilagens para próteses da anca com capacidade de libertação controlada de fármacos
PTDC/CTM-CTM/29593/2017
Egas Moniz - Cooperativa de Ensino Superior Crl, Portugal

Instituto de Engenharia Mecânica, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
1999 - 2001 Avaliação da Resistência ao Desgaste Abrasivo em Ferramentas de Corte e Revestimentos
IPS
Researcher
Instituto Politécnico de Setúbal, Portugal
Concluded

Other

Designation Funders
2021 - Current BioScaff -Produção de scaffolds cerâmicos para regeneração óssea por impressão 3D
IPS
Researcher
Ongoing
2017/10 - 2019/10 Projeto 3D-DentalPrint
Ref.ª Lisboa-01-0145--FEDER-02
Researcher - IPS team leader
Instituto Politécnico de Setúbal, Portugal
Concluded
2016/04/01 - 2018/09/30 Diamond&Hard Laser Coatings,
P2020, nº 003449
Researcher - IPS team leader
Instituto Politécnico de Setúbal, Portugal
Ongoing
2009/10 - 2013/03 Aplicação de parâmetros de contacto a análise de marcha no projeto de ortóteses promovendo a reabilitação
IPS
Principal investigator
Instituto Politécnico de Setúbal, Portugal
Concluded
2009/06 - 2009/09 Towards S-phase coated metal on ceramic total hips replacements
U. Leeds; F. C. Gulbenkian
Researcher
Instituto Politécnico de Setúbal, Portugal
Concluded

Publications

Book chapter
  1. Pina, Célio Gabriel Figueiredo; Mário Tapadinhas. "Wear on total hip replacement bearing surface". In Hip Replacement: Procedures, Potential Complications and Postoperative Rehabilitation, 35-64. NY, United States: NOVA SCIENCE PUBLISHERS, INC, 2013.
    Published
Conference abstract
  1. Albardeiro, Miguel; Sousa, Adriana; Guedes, Mafalda; Marat-Mendes, Rosa; Pina, Célio; Figueiredo, Lígia; Ascenso, Eduardo; Baptista, Ricardo. "Manufacturing Calcium Phosphates Scaffolds Using 3D-Printed Lost Molds". 2022.
    10.3390/materproc2022008138
  2. C. G. Figueiredo-Pina. "Subtractive vs additive manufacturing in the production of Zirconia pieces for dental applications". Paper presented in BioMAT2019, Weimar, 2019.
    Published
  3. C. G. Figueiredo-Pina. "Effect of the saliva biomolecules on the interface zirconia/Ti6Al4V triboactivity". Paper presented in 4th congress of CiiEM, Almada, 2019.
    Published
  4. C. G. Figueiredo-Pina. "Peças de zircónia produzidas por fabricação subtrativa vs aditiva com revestimento glaze". Paper presented in XXVII Jornadas Internacionais de Medicina Dentária, Almada, 2019.
    Published
  5. C. G. Figueiredo-Pina. "3D-Printing of zirconia dental prosthesis". Paper presented in 4th congress of CiiEM, Almada, 2019.
    Published
  6. Maheswaran, R.; Thiruvadigal, D. John; Gopalakrishnan, C.. "Thermal instability of DLC film surface morphology - an AFM study". Paper presented in 4th congress of CiiEM, Almada, 2019.
    Published • 10.1063/1.4710240
  7. Santos, A. F.; Polido, M.; Serro, A. P.; Figueiredo-Pina, C. G.. "Tribological performance of zirconia obtained by robocasting for dental restorations against dental cusps". Paper presented in IBERTRIVA 2019 – X Iberian Conference on Tribology (IBERTRIB), Sevilha, 2019.
    Published • 10.15544/balttrib.2017.29
  8. C. G. Figueiredo-Pina. "Robocasting of zirconia ceramic pastes for restorative dental structures". Paper presented in EuroMAT2019, Estocolmo, 2019.
    Published
  9. C. G. Figueiredo-Pina. "Subtractive vs additive manufacturing of zirconia dental samples: effect of glazing on the tribological behaviour". Paper presented in EUROMAT2019, Estocolmo, 2019.
    Published
  10. C. G. Figueiredo-Pina. "On the wear behaviour of laser clad Colmonoy-6 coatings under severe corrosive media". Paper presented in EUROMAT2019, Estocolmo, 2019.
    Published
  11. Pina, Célio Gabriel Figueiredo. "Translational Research and Innovation in Human and Health Science". 2018.
    10.1080/07853890.2018.1427452
  12. C. G. Figueiredo-Pina. "Subtractive vs additive manufacturing in the production of Zirconia pieces for dental applications". Paper presented in Third international Congress of CiiEM, Almada, 2018.
    Published
  13. C. G. Figueiredo-Pina. "Corrosion-wear assessment of Diamalloy™ 4060NS HVOF coating on a Super Duplex Stainless-Steel substrate in saline solution". Paper presented in 45th Leeds-Lyon Symposium on Tribology Smart Tribology Systems, Leeds, 2018.
    Published
  14. C. G. Figueiredo-Pina. "Evaluation of the tribological behaviour of ceramic-based prosthetic materials against human natural teeth through chewing simulation studies". Paper presented in ICoBT2018 - 4th International Conference on BioTribology, Montreal, 2018.
    Published
  15. C. G. Figueiredo-Pina. "Effect of pH of H2O2 solutions on human dental enamel tribological behaviour". Paper presented in ICoBT2018 - 4th International Conference on BioTribology, Montreal, 2018.
    Published
  16. C. G. Figueiredo-Pina. "Do microorganisms need to be taken into account in dental materials wear testing?". Paper presented in ICoBT2018 - 4th International Conference on BioTribology, Montreal, 2018.
    Published
  17. C. G. Figueiredo-Pina. "Effect of the pH of bleaching H2O2 solutions in the enamel morphology, hardness and color". Paper presented in BioMAT2017, Weimar, 2017.
    Published
  18. C. G. Figueiredo-Pina. "Enamel bleaching, effect of the pH". Paper presented in Second international Congress of CiiEM, Almada, 2017.
    Published
  19. C. G. Figueiredo-Pina. "The impact of the presence of bacteria on dental materials wear". Paper presented in Second international Congress of CiiEM, Almada, 2017.
    Published
  20. Cláudio, R.; Guedes, M.; Casimiro, A.; Silva, M.; Figueiredo-Pina, C.. "Friction coefficient of orthotic foams". 2015.
    10.1017/s1431927614014081
  21. C. G. Figueiredo-Pina. "Effect of powder size on the stabilization mechanism of zirconia in aqueous suspensión". Paper presented in MATERIAIS 2015, Porto, 2015.
    Published
  22. C. G. Figueiredo-Pina. "Bacteria impact on wear between the abutment and dental implant". Paper presented in First international Congress of CiiEM, Almada, 2015.
    Published
  23. Remisova, Eva. "Influence of the surface energy on the nanotribological behaviour of EVA foams for orthosis". Paper presented in First international Congress of CiiEM, Almada, 2015.
    Published • 10.5593/sgem2014/b42/s19.077
  24. C. G. Figueiredo-Pina. "Effect of 6% H2O2 solution, activated with UV-Radiation, in mechanical and tribological properties of enamel". Paper presented in First international Congress of CiiEM, Almada, 2015.
    Published
  25. C. G. Figueiredo-Pina. "Colloidal processing of new alumina/nano-zirconia composites for dental applications". Paper presented in First international Congress of CiiEM, Almada, 2015.
    Published
  26. F. Teodoro; silva, P; Pina, Célio Gabriel Figueiredo. "Preliminary study of contact modelling the interface between user skin and wearable equipment". Paper presented in 13th International conference on computing and mathematical methods in science and Engineering, CMMSE, Almería, 2013.
    Published
  27. C. G. Figueiredo-Pina. "Direrencias de género em la percepción à dolor en compresión". Paper presented in XXXVI Congreso de la Sociedad Ibérica de Biomecánica y Biomateriales SIBB2013, Granada, 2013.
    Published
  28. C. G. Figueiredo-Pina. "Friction coefficient of orthotic foams". Paper presented in XXXVI Congreso de la Sociedad Ibérica de Biomecánica y Biomateriales, Granada, 2013.
    Published
  29. C. G. Figueiredo-Pina. "The effect of the exfoliating abrasive percentage in the human skin tribological properties". Paper presented in XXXVI Congreso de la Sociedad Ibérica de Biomecánica y Biomateriales, Granada, 2013.
    Published
  30. Silva, P; Monteiro, A.; Bernardo, I.; Pina, Célio Gabriel Figueiredo. "Measuring Discomfort: From Pressure Pain Threshold To Soft Tissues Deformation". Paper presented in 18º Congress ESB, Lisboa, 2012.
    Published
  31. Silva, P; Pina, Célio Gabriel Figueiredo; Silva, A. "Preliminary experimental study of comfort parameters for the design of rehabilitation devices". Paper presented in ISB2011, Bruxelas, 2011.
    Published
  32. Pina, Célio Gabriel Figueiredo; Yan, Y; Neville, A; FISHER, J. "Analysis of corrosive wear in metal on metal and ceramic on metal bearings for hip prostheses". Paper presented in 53st Annual Meeting of the Orthopaedic Research Society, San Diego, 2007.
    Published
  33. Pina, Célio Gabriel Figueiredo; Dearnley, P A; Fisher, J. "Selection of coatings for application on stainless steel femoral heads in total hip replacements". Paper presented in 51st Annual Meeting of the Orthopaedic Research Society, Washington, D.C., 2005.
    Published
  34. Pina, Célio Gabriel Figueiredo; FISHER, J; DAHM, K; Dearnley, P A. "Testing of nitrogen s-phase coatings for application on stainless steel femoral heads in total hip replacements". Paper presented in 7th World Biomaterials, Sydney, 2004.
    Published
  35. Pina, Célio Gabriel Figueiredo; Dearnley, P A; DAHM, K; Fisher, J. "Evaluation of s-phase coatings for application on stainless steel femoral heads in total hip replacements". Paper presented in 50th Annual Meeting of the Orthopaedic Research Society, San Francisco, 2004.
    Published
Conference paper
  1. H. Teixeira; R. Colaço; A. P. Serro; C. G. Figueiredo-Pina. "The effect of Lysozyme on tribological response of Ti6AL4V&zirconia interface". Paper presented in BALTTRIB’2019, Kaunas, 2019.
    Published
  2. C. Cardoso; R. Colaço; A. P. Serro; C. G. Figueiredo-Pina. "Evaluation of the effect of the citric acid and benzoic acid on the enamel morphology and wear resistance". Paper presented in BALTTRIB’2019, Kaunas, 2019.
  3. Pina, Célio Gabriel Figueiredo; Rodrigues, I. "WEAR ASSESSMENT OF STELLITE COATING IN SEVERAL CORROSIVE SOLUTIONS". Paper presented in BALTTRIB’2017, kaunas, 2017.
  4. Lopes, M.; Ramalho, A.; Anandkumar, R.; Almeida, A.; Vilar, R.; Figueiredo-Pina, C.. "WEAR RESISTANCE OF Al–12 WT.% Si REINFORCED WITH NbC PARTICLES BY LASER CLADDING". Paper presented in BALTTRIB’2017, Kaunas, 2017.
    10.15544/balttrib.2017.06
  5. Branco, A.; Polido, M.; Serro, A.P.; Pina, Célio Gabriel Figueiredo. "Estudo do pH de soluções de H2O2 na eficiência do branqueamento e na microdureza do esmalte". Paper presented in 7º Congresso Nacional de Biomecânica, Guimarães, 2017.
  6. Pina, Célio Gabriel Figueiredo; Marat-Mendes, R. "Avaliação da resistência ao desgaste de novos compósitos para o fabrico de uma prótese do tipo Cheetah". Paper presented in 7º Congresso Nacional de Biomecânica, Guimarães, 2017.
  7. Branco, A.; Polido, M.; Serro, A.P.; Figueiredo-Pina, C.G.. "STUDY OF THE EFFECT OF H2O2 USED IN WHITENING TREATMENTS ON HUMAN ENAMEL WEAR RESISTANCE". Paper presented in BALTTRIB’2017, Kaunas, 2017.
    10.15544/balttrib.2017.22
  8. Figueiredo-Pina, C.G.; Moreira, V.; Colaço, R.; Serro, A.P.. "Tribocorrosion in Dental Implants: an In-Vitro Study". Paper presented in BALTTRIB’2015, Kaunas, 2015.
    10.15544/balttrib.2015.22
  9. Pina, Célio Gabriel Figueiredo; Rodrigues, F.; Serro, A.P.. "Study of the impact of the bleaching with 6% H2O2 Solution on teeth wear". Paper presented in BALTTRIB’2015, 2015.
  10. Carla Carneiro; Pina, Célio Gabriel Figueiredo. "Biofilm influence on tribological pair wear tooth-Zirconia". Paper presented in Ibertrib 2015., 2015.
  11. Pina, Célio Gabriel Figueiredo; Micaela Rodrigues; Guedes, M.. "EVALUATION OF TRIBOLOGICAL PROPERTIES OF NEW ALUMINA/ZIRCONIA CERAMICS FOR DENTAL RESTORATION". Paper presented in Ibertrib 2015. VIII Iberian Conference on Tribology, Cartagena, 2015.
    Published
  12. Sequeira, Joana; Carneiro, Carla; Pina, Célio Gabriel Figueiredo. "Impacto da presença de streptococos salivarius no desgaste dentário". Paper presented in 6º Cong. Nac. Biomecânica, Leiria, 2015.
  13. Micaela Rodrigues; Vera Beranardo; Silva, P; Pina, Célio Gabriel Figueiredo. "Avaliação da velocidade de penetração no linear da dor à compressão". Paper presented in 5º Cong. Nac. Biomecânica, Espinho, 2013.
    Published
  14. Pina, Célio Gabriel Figueiredo; Nádia Patas; Joana Canhoto; Ricardo Claudio. "Effect on wear of the application of feldspar coatings on lithium disilicate dental crowns". Paper presented in International Conference BALTTRIB’2013, Kaunas, 2013.
    Published
  15. Pina, Célio Gabriel Figueiredo; silva, P; Coutinho,J.. "Ensaios de aplicação localizada de força numa perna no limiar da dor". Paper presented in 4º Cong. Nac. Biomecânica, Coimbra, 2011.
    Published
  16. Monteiro, A; Mendes, M.; Silva, C.; Pina, Célio Gabriel Figueiredo. "Avaliação comparativa da resistência ao desgaste in vitro de zircónia revestida de não revestida". Paper presented in 4º Cong. Nac. Biomecânica, Coimbra, 2011.
    Published
  17. Leocádio, D.; Vicente, S.; Silva, P; Pina, Célio Gabriel Figueiredo. "Estudo Tribológico de Amostras de Pele de Suíno". Paper presented in 4º Cong. Nac. Biomecânica, coimbra, 2011.
    Published
  18. Pina, Célio Gabriel Figueiredo; Leocádio, D.; Vicente, S.; Silva, P. "Friction testing of porcine skin in different lubrication conditions". Paper presented in International Conference BALTTRIB’2011, Kaunas, 2011.
    Published
  19. Pina, Célio Gabriel Figueiredo; FISHER, J; Dearnley, P.A.. "Corrosion-wear response of a medical grade stainless steel". Paper presented in the International Conference BALTTRIB’2011, Kaunas, 2011.
    Published
  20. Pina, Célio Gabriel Figueiredo; Faias, C. S.; Frade, M. R.; Santos, C.. "Preliminary tribocorrosion study of CoCr and CrNi dental alloys in artificial saliva". Paper presented in International Conference BALTTRIB’2011, Kaunas, 2011.
    Published
  21. Pina, Célio Gabriel Figueiredo; DEARNLEY, P; DAHM, K; Fisher, J. "Characteristics and corrosion-wear response of s-phase coated ortron 90". Paper presented in leeds-lyon symposium., Lyon, 2003.
    Published
  22. Pina, Célio Gabriel Figueiredo; Colaço, R; Vilar, R. "Laser surface melting and abrasive wear behaviour of plastic mould tool steel: influence of the processing conditions". Paper presented in 4th ASM heat treatment and surface engineering conference in Europe, Lisboa, 1998.
    Published
Conference poster
  1. Pina, Célio Gabriel Figueiredo; FISHER, J; Dearnley, P.A.. "Corrosion-wear interactions of S-phase coated Ortrhopeadic austenitic steel". Paper presented in 4th International Conference on Wear of Materials, 2003.
Edited book
  1. A. P Serro; Branco, A. C.; C. Carneiro; D. Silva; M. Guedes; C. Figueiredo-Pina. Book of abstracts of 11th Iberian Conference on Tribology. Setúbal, Portugal: IPS. 2022.
    Published • Editor
  2. C. G. Figueiredo-Pina; L. Esteves; J. Martins; S. Rafael. Jornadas Pedagógicas da ESTSetúbal/IPS 2018: Metodologias Pedagógicas no Ensino das Engenharias: Livro de Resumos. Setúbal, Portugal: IPS. 2018.
    Published • Editor
Journal article
  1. Santos, Francisco; Marto-Costa, Carolina; Branco, Ana Catarina; Oliveira, Andreia Sofia; Galhano dos Santos, Rui; Salema-Oom, Madalena; Diaz, Roberto Leonardo; et al. "Tribomechanical Properties of PVA/Nomex® Composite Hydrogels for Articular Cartilage Repair". Gels 10 8 (2024): 514. http://dx.doi.org/10.3390/gels10080514.
    10.3390/gels10080514
  2. Branco, A.C.; Santos, T.; Bessa, L.J.; Barahona, I.; Polido, M.; Colaço, R.; Serro, A.P.; Figueiredo-Pina, C.G.. "Optimized 3D printed zirconia-reinforced leucite with antibacterial coating for dental applications". Dental Materials (2024): http://dx.doi.org/10.1016/j.dental.2024.02.021.
    10.1016/j.dental.2024.02.021
  3. Branco, Ana Catarina; Colaço, Rogério; Figueiredo-Pina, Célio Gabriel; Serro, Ana Paula. "Recent Advances on 3D-Printed Zirconia-Based Dental Materials: A Review". Materials 16 5 (2023): 1860. http://dx.doi.org/10.3390/ma16051860.
    10.3390/ma16051860
  4. Pereira, Daniel F.; Branco, A.C.; Cláudio, Ricardo; Marques, Ana C.; Figueiredo-Pina, C. G.. "Development of Composites of PLA Filled with Different Amounts of Rice Husk Fibers for Fused Deposition Modeling". Journal of Natural Fibers 20 1 (2023): http://dx.doi.org/10.1080/15440478.2022.2162183.
    10.1080/15440478.2022.2162183
  5. Pires, Tomás; Oliveira, Andreia Sofia; Marques, Ana Clara; Salema-Oom, Madalena; Figueiredo-Pina, Célio G.; Silva, Diana; Serro, Ana Paula. "Effects of Non-Conventional Sterilisation Methods on PBO-Reinforced PVA Hydrogels for Cartilage Replacement". Gels 8 10 (2022): 640. http://dx.doi.org/10.3390/gels8100640.
    10.3390/gels8100640
  6. Oliveira, Andreia S.; Ferreira, Inês; Branco, Ana C.; Silva, João C.; Costa, Carolina; Nolasco, Pedro; Marques, Ana C.; et al. "Development of polycarbonate urethane-based materials with controlled diclofenac release for cartilage replacement". Journal of Biomedical Materials Research Part B: Applied Biomaterials (2022): http://dx.doi.org/10.1002/jbm.b.35042.
    10.1002/jbm.b.35042
  7. Branco, Ana C.; Oliveira, Andreia S.; Monteiro, Inês; Nolasco, Pedro; Silva, Diana C.; Figueiredo-Pina, Célio G.; Colaço, Rogério; Serro, Ana P.. "PVA-Based Hydrogels Loaded with Diclofenac for Cartilage Replacement". Gels 8 3 (2022): 143. http://dx.doi.org/10.3390/gels8030143.
    10.3390/gels8030143
  8. Branco, A.C.; Santos, T.; Polido, M.; Colaço, R.; Serro, A.P.; Figueiredo-Pina, C.G.. "Wear of zirconia/leucite glass-ceramics composites: A chewing simulator study". Ceramics International 48 4 (2022): 4604-4613. http://dx.doi.org/10.1016/j.ceramint.2021.10.247.
    10.1016/j.ceramint.2021.10.247
  9. Teixeira, H.; Branco, A.C.; Rodrigues, I.; Silva, D.; Cardoso, S.; Colaço, R.; Serro, A.P.; Figueiredo-Pina, C.G.. "Effect of albumin, urea, lysozyme and mucin on the triboactivity of Ti6Al4V/zirconia pair used in dental implants". Journal of the Mechanical Behavior of Biomedical Materials (2021): 104451. http://dx.doi.org/10.1016/j.jmbbm.2021.104451.
    10.1016/j.jmbbm.2021.104451
  10. Branco, A. C.; Rodrigues, I.; Paradiso, P.; Polido, M.; Colaço, R.; Figueiredo-Pina, C. G.; Serro, A. P.. "Effect of H2O2 Solution’s pH on the Human Enamel Micro and Nanowear". Tribology Letters 68 4 (2020): http://dx.doi.org/10.1007/s11249-020-01376-9.
    10.1007/s11249-020-01376-9
  11. Branco, A.C.; Silva, R.; Jorge, H.; Santos, T.; Lorenz, K.; Polido, M.; Colaço, R.; Serro, A.P.; Figueiredo-Pina, C.G.. "Tribological performance of the pair human teeth vs 3D printed zirconia: An in vitro chewing simulation study". Journal of the Mechanical Behavior of Biomedical Materials 110 (2020): 103900. http://dx.doi.org/10.1016/j.jmbbm.2020.103900.
    10.1016/j.jmbbm.2020.103900
  12. Rodrigues, I.; Guedes, M.; Olhero, S.; Chefdor, A.; Branco, A.C.; Leite, M.; Serro, A.P.; Figueiredo-Pina, C.G.. "Development of free binder zirconia-based pastes for the production of dental pieces by robocasting". Journal of Manufacturing Processes 57 (2020): 1-9. http://dx.doi.org/10.1016/j.jmapro.2020.06.015.
    10.1016/j.jmapro.2020.06.015
  13. Branco, Ana Catarina; Colaço, Rogério; Figueiredo-Pina, Célio Gabriel; Serro, Ana Paula. "A State-of-the-Art Review on the Wear of the Occlusal Surfaces of Natural Teeth and Prosthetic Crowns". Materials 13 16 (2020): 3525. http://dx.doi.org/10.3390/ma13163525.
    10.3390/ma13163525
  14. Branco, A.C.; Silva, R.; Santos, T.; Jorge, H.; Rodrigues, A.R.; Fernandes, R.; Bandarra, S.; et al. "Suitability of 3D printed pieces of nanocrystalline zirconia for dental applications". Dental Materials (2020): http://dx.doi.org/10.1016/j.dental.2020.01.006.
    10.1016/j.dental.2020.01.006
  15. Branco, A. C.; Ribeiro, N.; Figueiredo-Pina, C. G.; Colaço, R.; Serro, A. P.. "Characterization of the Nanostructure of Collagen Fibers Following the Application of Dilute Hydrogen Peroxide used in Dental Whitening Treatments". Analytical Letters 53 5 (2019): 705-713. http://dx.doi.org/10.1080/00032719.2019.1668946.
    10.1080/00032719.2019.1668946
  16. Figueiredo-Pina, C.G.; Rodrigues, I.; Sequeira, J.; Guedes, M.; Carneiro, C.. "Does the presence of a S. Salivarius biofilm influence the tooth-zirconia pair triboactivity? An in-vitro study". Wear 430-431 (2019): 50-56. http://dx.doi.org/10.1016/j.wear.2019.04.018.
    10.1016/j.wear.2019.04.018
  17. Rodrigues, I.; Nunes, B.; Almeida, A.; Vilar, R.; Figueiredo-Pina, C.G.. "Are Cr3C2-25(80Ni20Cr) coatings deposited by HVOF suitable for reciprocating sliding contacts under aqueous media?". Tribology International (2019): 105825. http://dx.doi.org/10.1016/j.triboint.2019.06.018.
    10.1016/j.triboint.2019.06.018
  18. Galante, Raquel; Figueiredo-Pina, Celio G.; Serro, Ana Paula. "Additive manufacturing of ceramics for dental applications: A review". Dental Materials (2019): http://dx.doi.org/10.1016/j.dental.2019.02.026.
    10.1016/j.dental.2019.02.026
  19. Branco, A.C.; Moreira, V.; Reis, J.A.; Colaço, R.; Figueiredo-Pina, C.G.; Serro, A.P.. "Influence of contact configuration and lubricating conditions on the microtriboactivity of the zirconia-Ti6Al4V pair used in dental applications". Journal of the Mechanical Behavior of Biomedical Materials 91 (2019): 164-173. http://dx.doi.org/10.1016/j.jmbbm.2018.12.009.
    10.1016/j.jmbbm.2018.12.009
  20. Marat-Mendes, R; Rodrigues, I; Figueiredo-Pina, CG. "Evaluation of tribological performance of carbon fibre reinforced epoxy composites loaded with graphite platelets under reciprocating linear motion". Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology (2019): 135065011982644. http://dx.doi.org/10.1177/1350650119826443.
    10.1177/1350650119826443
  21. Santos, F.; Branco, A.; Polido, M.; Serro, A.P.; Figueiredo-Pina, C.G.. "Comparative study of the wear of the pair human teeth/Vita Enamic® vs commonly used dental ceramics through chewing simulation". Journal of the Mechanical Behavior of Biomedical Materials 88 (2018): 251-260. http://dx.doi.org/10.1016/j.jmbbm.2018.08.029.
    10.1016/j.jmbbm.2018.08.029
  22. Figueiredo-Pina, Célio G.; Guedes, Mafalda; Sequeira, Joana; Pinto, Diana; Bernardo, Nuno; Carneiro, Carla. "On the influence of Streptococcus salivarius on the wear response of dental implants: An in vitro study". Journal of Biomedical Materials Research Part B: Applied Biomaterials (2018): http://dx.doi.org/10.1002/jbm.b.34231.
    10.1002/jbm.b.34231
  23. Rodrigues, F.T.; Serro, A.P.; Polido, M.; Ramalho, A.; Figueiredo-Pina, C.G.. "Effect of bleaching teeth with hydrogen peroxide on the morphology, hydrophilicity, and mechanical and tribological properties of the enamel". Wear 374-375 (2017): 21-28. http://dx.doi.org/10.1016/j.wear.2016.11.001.
    10.1016/j.wear.2016.11.001
  24. Baptista, R.; Mendão, A.; Rodrigues, F.; Figueiredo-Pina, C.G.; Guedes, M.; Marat-Mendes, R.. "Effect of high graphite filler contents on the mechanical and tribological failure behavior of epoxy matrix composites". Theoretical and Applied Fracture Mechanics 85 9 (2016): 113-124.
    Published • 10.1016/j.tafmec.2016.08.013
  25. Figueiredo-Pina, C.G.; Patas, N.; Canhoto, J.; Cláudio, R.; Olhero, S.M.; Serro, A.P.; Ferro, A.C.; Guedes, M.. "Tribological behaviour of unveneered and veneered lithium disilicate dental material". Journal of the Mechanical Behavior of Biomedical Materials 53 10 (2016): 226-238.
    Published • 10.1016/j.jmbbm.2015.08.007
  26. Figueiredo-Pina, C.G.; Monteiro, A.; Guedes, M.; Maurício, A.; Serro, A.P.; Ramalho, A.; Santos, C.. "Effect of feldspar porcelain coating upon the wear behavior of zirconia dental crowns". Wear 297 1-2 (2013): 872-877.
    Published • 10.1016/j.wear.2012.10.016
  27. Figueiredo-Pina, C G; Dearnley, P A. "Influence of scratch damage to S phase coated and uncoated orthopaedic grade stainless steel on wear of ultrahigh molecular weight polyethylene". Surface Engineering 28 9 (2012): 683-692.
    Published • 10.1179/1743294412Y.0000000022
  28. Pina, Célio Gabriel Figueiredo; Neves, Armanda Agostinho Matos; Neves, Bruno Miguel Bandarra das. "Corrosion-wear evaluation of a UHMWPE/Co–Cr couple in sliding contact under relatively low contact stress in physiological saline solution". Wear 271 5-6 (2011): 665-670.
    Published • 10.1016/j.wear.2010.11.014
  29. Pina, Célio Gabriel Figueiredo; Dearnley, P.A.; Fisher, J.. "UHMWPE wear response to apposing nitrogen S-phase coated and uncoated orthopaedic implant grade stainless steel". Wear 267 5-8 (2009): 743-752.
    Published • 10.1016/j.wear.2009.01.036
  30. Pina, Célio Gabriel Figueiredo; Yan, Y; Neville, A; Fisher, J. "Understanding the differences between the wear of metal-on-metal and ceramic-on-metal total hip replacements". Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 222 3 (2008): 285-296.
    Published • 10.1243/09544119JEIM363
  31. Dearnley, P A; Pina, Célio Gabriel Figueiredo; Fisher, J. "Assessment of S-phase coated medical grade stainless steel (Ortron 90) for use in the human joint replacement corrosion–wear environment". Journal of Physics D: Applied Physics 41 10 (2008): 105305-105305.
    Published • 10.1088/0022-3727/41/10/105305
  32. Pina, Célio Gabriel Figueiredo; DAHM, K; FISHER, J; DEARNLEY, P. "The damage tolerance of S-phase coated biomedical grade stainless steel". Wear 263 7-12 (2007): 1081-1086.
    Published • 10.1016/j.wear.2006.10.025
  33. Colaço, R; Pina, C; Vilar, R. "Influence of the processing conditions on the abrasive wear behaviour of a laser surface melted tool steel". Scripta Materialia 41 7 (1999): 715-721.
    Published • 10.1016/S1359-6462(99)00206-7

Oral presentation

Presentation title Event name
Host (Event location)
2019/11 Corrosion and corrosion-wear evaluation of WC-12Co in Saline Solution BALTTRIB’2019
(kaunas, Lithuania)
2019/07 Tribological performance of zirconia obtained by robocasting for dental restorations against dental cusps IBERTRIVA 2019 – X Iberian Conference on Tribology (IBERTRIB) / XI Iberian Vacuum Conference (RIVA)
(Kaunas, Spain)
2019 Evaluation of the effect of the citric acid and benzoic acid on the enamel morphology and wear resistance BALTTRIB’2019
(Kaunas, Lithuania)
2019 The effect of Lysozyme on tribological response of Ti6AL4V&zirconia interface BALTTRIB’2019
(Kaunas, Lithuania)
2018/09 Do microorganisms need to be taken into account in dental materials wear testing 4th International Conference on BioTribology
(Montreal, Canada)
2018/09 Effect of pH of H2O2 solutions on human dental enamel tribological behaviour 4th International Conference on BioTribology
(Montreal, Canada)
2018/09 Sliding wear resistance of CFRP composites reinforced with graphite platelets Leeds-Lyon Symposium on Tribology
(Leeds, United Kingdom)
2018/09 Assessment of wear under corrosive media of a chromium carbide coatings and a stainless-steel substrate in several corrosive solutions Leeds-Lyon Symposium on Tribology Smart Tribology Systems
(Leeds, United Kingdom)
2018 Corrosion-wear assessment of Diamalloy™ 4060NS HVOF coating on a Super Duplex Stainless-Steel substrate in saline solution 45th Leeds-Lyon Symposium on Tribology Smart Tribology Systems
(Leeds, United Kingdom)
2018 Are Cr3C2 25 (80 Ni 20 Cr) coatings deposited by HVOF suitable for sliding contacts under aqueous media? 45th Leeds-Lyon Symposium on Tribology Smart Tribology Systems
(Leeds, United Kingdom)
2018 Evaluation of the tribological behaviour of ceramic-based prosthetic materials against human natural teeth through chewing simulation studies ICoBT2018 - 4th International Conference on BioTribology
(Montreal, Canada)
2017 WEAR ASSESSMENT OF STELLITE COATING IN SEVERAL CORROSIVE SOLUTIONS BALTTRIB’2017
(Lithuania)
2017 WEAR RESISTANCE OF AL–12 WT.% SI REINFORCED WITH NbC PARTICLES BY LASER CLADDING
(Lithuania)
2015 TRIBOCORROSION IN DENTAL IMPLANTS: AN IN-VITRO STUDY BALTTRIB’2015
(Lithuania)
2015 STUDY OF THE IMPACT OF THE BLEACHING WITH 6% H2O2 SOLUTION ON TEETH WEAR BALTTRIB’2015
(Lithuania)
2015 Evaluation of tribological properties of new alumina-zirconia ceramics for dental restorations Ibertrib 2015. VIII Iberian Conference on Tribology
(Cartagena, Spain)
2015 Study of the friction coefficient between artificial skin and orthopaedic foams BALTTRIB’2015
(Kaunas, Lithuania)
2013 Effect on wear of the application of feldspar coatings on lithium disilicate dental crowns BALTTRIB’2013
(Lithuania)
2011 Corrosion-wear response of a medical grade stainless steel
(Lithuania)
2011 Friction testing of porcine skin in different lubrication conditions BALTTRIB’2011
(Kaunas, Lithuania)
2011 Preliminary tribocorrosion study of CoCr and CrNi dental alloys in artificial saliva BALTTRIB’2011
(Lithuania)
2009 The UHMWPE wear response to opposing nitrogen S-phase coated and uncoated orthopedic implant grade Stainless steel 17 th international conference of wear on materials
(Washington, D.C, United States)
2007 Analysis of corrosive wear in metal on metal and ceramic on metal bearings for hip prostheses 53st Annual Meeting of the Orthopaedic Research Society
(San Diego, United States)
2005 Selection of coatings for application on stainless steel femoral heads in total hip replacements 51st Annual Meeting of the Orthopaedic Research Society
(Washington, United States)
2004 Testing of nitrogen s-phase coatings for application on stainless steel femoral heads in total hip replacements Congress Transitions , 7th World Biomaterials,
(Sydney)
2004 Evaluation of s-phase coatings for application on stainless steel femoral heads in total hip replacements 50th Annual Meeting of the Orthopaedic Research Society
(São Francisco, United States)
2003 Degradation of S-phase coatings in orthopedic environment Tribocorrosion of biomaterials
(Washington)
2003 Corrosion-wear interactions of S-phase coated Ortrhopeadic austenitic steel 14th International Conference on Wear of Materials
(Washington DC, United States)
2003 High speed steel tools wear characterization 14th International Conference on Wear of Materials
(Washington DC, United States)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2024/02 - Current Development of ceramic composites for dental applications
Supervisor
 Mestrado em Engenharia Biomédica (Master)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2024/02 - Current Development of multilayer hydrogels for articular cartilage repair
Supervisor
 Mestrado em Engenharia Biomédica (Master)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2023/03 - Current Development of 3D printed composites of PLA reenforced with natural fibres
Supervisor
 Mestrado em Engenharia de Produção (Master)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2023/03 - Current Hydroxyapatite 3D printed scaffolds
Co-supervisor
 Mestrado em Engenharia Biomédica (Master)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2023/02 - Current Development of biocomposites reenforced by natural fibres for molds production by fused deposition modeling
Supervisor
 Doutoramento em Engenharia de Materiais (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/02 - Current Direct Laser-assisted Additive manufacturing of maraging steels
Co-supervisor
 Engenharia de Materiais (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2010 - Current 54 students’ final project Supervisor. The projects were related with biomaterials development and characterization mainly in biotribology..
Supervisor
 Engenharia Biomédica e Tecnologia biomédica (Degree)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2018/07 - 2024/01 Fast production of zirconia based dental prosthesis by 3D printing
Co-supervisor
 Engenharia de Materiais (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/03 - 2023/12 Desenvolvimento de hidrogéis de PVA reforçados com ácido cítrico e/ou conteira para substituição de cartilagem articular
Supervisor
 Mestrado em Engenharia Biomédica (Master)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2023/03 - 2023/03 The influence of the foods acids on the enamel tribological performance
Supervisor
 Mestrado em Engenharia Biomédica (Master)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2022/03 - 2022/12 Nomex® Reinforced Poly (Vinyl Alcohol)-based Hydrogels for Articular Cartilage Replacement
Co-supervisor
 Mestrado Bioengenharia e Nanossistemas (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/03 - 2021/12 Additive manufacturing of rice husk filled PLA composites: Development and Characterization
Supervisor
 Mestrado em Engenharia de Produção (Master)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2021/03 - 2021/11 Chewing simulator studies on leucite reinforced with zirconia for dentistry
Co-supervisor
 Mestrado Bioengenharia e Nanossistemas
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/02 - 2021/09 Produção e caracterização de compósitos de matriz epóxi com fibra de conteira e de sisal
Supervisor
 Mestrado em Engenharia de Produção (Master)
Instituto Politécnico de Setúbal, Portugal
2020/09 - 2021/05 Development of alginate-based hydrogels for cartilage replacement
Co-supervisor
 Mestrado em Engenharia de Materiais (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/02 - 2021/02/18 Produção e caracterização de compósitos de matriz epóxi com fibra de conteira.
Supervisor
 Mestrado em Engenharia de Produção (Master)
Instituto Politécnico de Setúbal, Portugal
2019 - 2019/12/18 Avaliação da resistência ao desgaste a seco e em meio salino de um revestimento de 12Co-WC obtido por HVOF
Supervisor
 Mestrado em Engenharia de Produção (Master)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2019 - 2019 Novos revestimentos duros para fabrico e reparação de ferramentas por deposição assistida por laser
Co-supervisor
 Mestrado em Engenharia de Materiais (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - 2018 Estudo do comportamento ao desgaste de compósitos de Al-12Si/NbC desenvolvidos por deposição assistida por Laser
Supervisor
 Mestrado em Engenharia de Produção (Master)
Instituto Politécnico de Setúbal, Portugal
2017 - 2017 Evaluation of the tribological behaviour of systems natural teeth/ceramic based prosthetic materials
Co-supervisor
 Bioengenharia e Nanossistemas (Master)
Universidade de Lisboa, Portugal
2017 - 2017 Study of the effect of pH of H2O2 solutions in human dental enamel properties
Co-supervisor
 Bioengenharia e Nanossistemas (Master)
Universidade de Lisboa, Portugal
2017 - 2017 Optimization of zirconia-based pastes for additive manufacturing of dental prosthesis
Co-supervisor
 Bioengenharia e Nanossistemas (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015 - 2015 Efeito do branqueamento dentário com peróxido de hidrogénio na morfologia, hidrofilicidade, propriedades mecânicas e tribológicas do esmalte
Co-supervisor
 Bioengenharia e Nanossistemas (Master)
Universidade de Lisboa, Portugal
2015 - 2015 Comportamento tribológico de sistemas espumas ortopédicas/pele artificial: efeito da morfologia, propriedades mecânicas e energia livre superficia
Co-supervisor
 Mestrado em Bioengenharia e Nanossistemas (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014 - 2015 Desenvolvimento e avaliação tribologica de compósitos do sistema alumina/zircónia para aplicações dentárias
Supervisor
 Mestrado em Engª Biomédica- Desporto e Reabilitação (Master)
Instituto Politécnico de Setúbal, Portugal
2014 - 2015 Avaliação do impacto da presença de bactérias no par tribológico dente/zircónia
Supervisor
 Mestrado em Engª Biomédica- Desporto e Reabilitação (Master)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2014 - 2014 Avaliação da corrosão nas tubagens do Terminal de Graneis Líquidos de Sines de 2009 a 2013: Incidência de ruturas e custos
Supervisor
 Mestrado em Engenharia de Produção (Master)
Instituto Politécnico de Setúbal, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2018/05/24 - Current Jornadas pedagógicas 2018 ESTSetúbal, Metodologias no ensino da Engenharia (2018/05/24 - 2018/05/24)
Conference (Member of the Organising Committee)
 Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2018 - Current Membro da comissão científica do 3º congresso Internacional do CiiEM, Translational Research and Innovation in Human in health Sciences” Cooperativa de Ensino Superior Egas Moniz, Monte da Caparica de 20 -21 de junho, 2018. (2018 - 2018)
Conference (Member of the Scientific Committee)
2020/01 - 2020/10 Ibertrib2022. . 11th Iberian Conference on Tribology (2022/10/06 - 2022/10/07)
Conference (President of the Organising Committee)
2019 - 2019 Moderador da Sessão nº 3 “Surface processing and surface science III” na “the International Conference BALTTRIB’2019”, Kaunas, Lituânia, Nov. 2019. (2019 - 2019)
Congress (Other)
2018/03 - 2018/05 Ciclo de seminários no âmbito da UC de projeto/estágio em Biomédica (2018/03 - 2018/05)
Seminar (President of the Organising Committee)
 Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2017 - 2017 Congresso Nacional de Prática Pedagógicas no Ensino Superior
Symposium (Other)
2017 - 2017 Moderador da Sessão paralela 1 do 7º Congresso Nacional de Biomecânica, Guimarães, Fevereiro 2017. (2017 - 2017)
Conference (Other)
2017 - 2017 Moderador da Sessão 3 na “The International Conference BALTTRIB’2017”, Kaunas, Lituânia, Nov. 2017. (2017 - 2017)
Conference (Other)
2015 - 2015 Moderador da Sessão 3 “Tribological materials” na “The International Conference BALTTRIB’2015”, Kaunas, Lituânia, Nov. 2015. (2015 - 2015)
Conference (Other)
2014 - 2014 1º Ciclo de Seminários da Unidade Curricular de Seminário II do Mestrado em Engª Biomédica Desporto e Reablitação (2014 - 2014)
Seminar (Co-organisor)
2014 - 2014 2º Ciclo de Seminários da UC de Seminários II do Mestrado de Engª Biomédica Desporto e Reabilitação
Symposium (Co-organisor)
2013 - 2013 I Jornadas do Projeto em Biomecânica ESTSetúbal/IPS
Seminar (Co-organisor)
2013 - 2013 Moderador da Sessão 3 “Tribological materials” na “The International Conference BALTTRIB’2013”, Kaunas, Lituânia, Nov. 2013. (2013 - 2013)
Conference (Other)
2011 - 2011 A utilização da zircónia no fabrico de coroas dentárias
Seminar (Co-organisor)
2011 - 2011 Moderador da Sessão 3 “Tribological materials” na “The International Conference BALTTRIB’2011”, Kaunas, Lituânia, Nov. 2011. (2011 - 2011)
Conference (Other)

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2022/12/02 Nomex® Reinforced Poly (Vinyl Alcohol)-based Hydrogels for Articular Cartilage Replacement
Supervisor
 Francisco Santos (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/11/28 PBAT biocomposite with banana pseudo-stem fibers
(Thesis) Arguer
 Rita Serôdio (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/05/19 Engineering polyvinyl alcohol-based hydrogels for load-bearing cartilage replacement
(Thesis) Main arguer
 Andreia Sofia Gonçalves de Oliveira (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/12/09 Chewing simulator studies on leucite reinforced with zirconia for dentistry
Supervisor
 Maria Godinho (Master)
2021/12/03 Effects of non-conventional sterilization methods on PVA-Zylon hydrogels for cartilage repair
(Thesis) Arguer
 Tomás Pires (Master)
2021/09/29 Produção e caracterização de compósitos de matriz epóxi com fibra de conteira e de sisal
Supervisor
 João Aguiar (Master)
2021/02/18 Produção e caracterização de compósitos de matriz epóxi com fibra de conteira
Supervisor
 Rodrigo Ferreira (Master)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2021/01/29 Materiais à base de PVA e CPU para substituição de cartilagem
(Thesis) Arguer
 Inês Borlido Ferreira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/12/20 Drug loaded cartilage-like materials for hip prosthesis
(Thesis) Arguer
 Maria Inês Fernandes da Cunha Monteiro (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/12/20 Tribomechanical behaviour of chemically crosslinked PVA hydrogels
(Thesis) Arguer
 Mariana Inês Martins de Sá Patacho (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/12/19 Biomechanical Analysis of a Novel Bioactive Dental Implant
(Thesis) Arguer
 Alexandre Varo Leal Salústio (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/12/18 Avaliação da resistência ao desgaste de um revestimento ultraduro obtido por HVOF
Supervisor
 João Pablo (Master)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2018/06/05 Poly(Vinyl Alcohol-Based Hydrogeles for joint prosthesis
(Thesis) Main arguer
 Ana Carolina da Cruz Quartin Borges (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/01/29 Estudo do comportamento ao desgaste de compósitos de Al-12Si/NbC desenvolvidos por deposição assistida por Laser
Supervisor
 Miguel Ângelo do Rosário Lopes (Master)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2017/12/04 Evaluation of the tribological behaviour of systems natural teeth/ceramic based prosthetic materials
Supervisor
 Ana Santos (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017/11/06 Optimization of zirconia-based pastes for additive manufacturing of dental prosthesis
Supervisor
 Madalena Paredes (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/12/03 Efeito do branqueamento dentário com peróxido de hidrogénio na morfologia, hidrofilicidade, propriedades mecânicas e tribológicas do esmalte
Supervisor
 Filipe Rodrigues (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/12/03 Comportamento tribológico de sistemas espumas ortopédicas/pele artificial: efeito da morfologia, propriedades mecânicas e energia livre superficial
Supervisor
 Diogo Aguilar Silva (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/10/23 Functionalization by ion implantation of Si: influence on wettability and tribomechanical properties at micro and nanoscales
Thesis Member
 Bruno Miguel Fernandes Nunes (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/03/23 Desenvolvimento e avaliação tribologica de compósitos do sistema alumina/zircónia para aplicações dentárias
Supervisor
 Micaela Rodrigues (Master)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2015/03/23 Avaliação do impacto da presença de bactérias no par tribológico dente/zircónia
Supervisor
 Joana Sousa (Master)
Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2014/12/04 Comportamento do sistema tribológico do sistema Zircónia/Ti6Al4V em implantes dentários
(Thesis) Main arguer
 Vanessa Moreira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014 Hospital Acquired infections: Effect of antibiotics on the increased resistance of microorganisms
(Thesis) Main arguer
 Ana Bandeira (Master)

Consulting

Activity description Institution / Organization
2008 - Current Prestação de serviço à PORTUCEL, formador do módulo de corrosão em caldeiras.
1997 - 1999 Ensaios mecânicos a arrames para a Portucel

Journal scientific committee

Journal title (ISSN) Publisher
2021/05 - 2021/05 Materials MDPI
2021/04 - 2021/04 Tribology International Elsevier
2021/04 - 2021/04 Journal of Engineering Tribology SAGE Publications
2021/04 - 2021/04 Materials MDPI
2021/03 - 2021/03 Corrosion Science Elsevier
2021/02 - 2021/02 Tribology International Elsevier
2020/11 - 2020/11 Acta Biomaterialia Elsevier
2020/11 - 2020/11 Tribology International Elsevier
2020/10 - 2020/10 Wear Elsevier
2020/10 - 2020/10 Coatings MDPI
2020/09 - 2020/09 Journal of Natural Fibers Informa UK (Taylor & Francis)
2020/09 - 2020/09 Journal of Advanced Ceramics Springer
2020/07 - 2020/07 Journal of Natural Fibers Informa UK (Taylor & Francis)
2020/07 - 2020/07 Journal of the Mechanical Behavior of Biomedical Materials Elsevier
2020/06 - 2020/06 Materials (1996-1944 MDPI
2020/05 - 2020/05 Materials (1996-1944) MDPI
2020/05 - 2020/05 Tribology International Elsevier
2020/03 - 2020/03 Materials MDPI
2020/03 - 2020/03 Journal of Natural Fibers (1544-046X) Informa UK (Taylor & Francis)
2020 - 2020 Dental Materials (0109-5641) Elsevier
2020 - 2020 Corrosion Science (0010-938X) Elsevier
2020 - 2020 Materials (1996-1944)
2020 - 2020 Journal of Natural Fibers (1544-046X) Informa UK (Taylor & Francis)
2019 - 2019 Crystals (2073-4352) MDPI AG
2019 - 2019 Journal of the Mechanical Behavior of Biomedical Materials (1751-6161) Elsevier
2019 - 2019 Applied Surface Science (0169-4332) Elsevier
2019 - 2019 Wear (0043-1648) Elsevier
2019 - 2019 Tribology International (0301-679X) Elsevier
2019 - 2019 Surface and Coatings Technology (0257-8972) Elsevier
2018 - 2018 Gels (2310-2861) MDPI AG
2018 - 2018 Tribology International (0301-679X) Elsevier
2018 - 2018 Journal of the Mechanical Behavior of Biomedical Materials (1751-6161) Elsevier
2018 - 2018 Annals of Medicine
2017 - 2017 Tribology International (0301-679X) Elsevier
2016 - 2016 Tribology International (0301-679X) Elsevier
2016 - 2016 Journal of the Mechanical Behavior of Biomedical Materials (1751-6161) Elsevier
2015 - 2015 Biosurface and Biotribology (2405-4518) Institution of Electrical Engineers
2015 - 2015 Assembly Automation (0144-5154) Emerald (MCB UP )
2015 - 2015 Journal of Functional Biomaterials (2079-4983) MDPI AG
2012 - 2012 Industrial Crops and Products (0926-6690) Elsevier

Other jury / evaluation

Activity description Institution / Organization
2018/06/08 - Current Provas de avaliação pedagógica e técnico-científica Instituto Politécnico de Setúbal, Portugal
2020/12/15 - 2021/07/27 Concurso Documental para Prof. Coordenador da área disciplinar de MMS Instituto Politécnico de Setúbal, Portugal