???global.info.a_carregar???
Nataliya Sakharova is a Research Assistant in Mechanical Engineering Research Center of University of Coimbra, Portugal. She obtained her PhD degree in Physical and Mathematical Sciences (Solid State Physics) by the V.N. Karazin Kharkiv National University in Kharkiv, Ukraine in 1999. In 2004 she took an opportunity to continue her research activity in CEMUC (University of Coimbra's Mechanical Engineering Research Centre), Portugal. In 2018, she received a PhD degree in Mechanical Engineering from the University of Coimbra. Her areas of scientific activity are mechanical properties of bulk materials and thin films: modelling and numerical simulation, inverse analysis and experimental aspects; experimental mechanical characterization of materials: mechanical tests and structural studies by different techniques, including Transmission Electron Microscopy; metal forming: fundamental aspects, modelling, constitutive laws, inverse analysis, numerical simulation and applications; mechanical properties of nanomaterials: modelling and experimental aspects. Nataliya Sakharova participated, back in 2014, in the conceptualization of the modelling approach, which allowed evaluating the elastic properties of carbon nanotubes, and later on, in 2019, she was an initiator to expand this approach to others carbon structures and also non-carbon nanotubes structures. Thus, she turned a major contributor in the development of the abovementioned research line and respective accomplishments. She is an organizer of the Special Session Nanomaterials of the International Advanced Computational Engineering and Experimenting (ACE-X) conferences since 2017, and a member of Scientific committee of these conferences started from 2019. In the period from 2019 up to now, Nataliya Sakharova was Guest Editor of four Special Issues in open access journal. Since 2015 she reviewed more than 70 manuscripts for international peer review ISI journals. During last three years, Nataliya Sakharova participated as a researcher, promoting the activity of the CEMMPRE - Center for Mechanical Engineering, Materials and Processes for "The European Researchers' Night" (Noite Europeia dos/das Investigadores/as), NEI Coimbra, 2021, 2022 and 2023, and she was responsible for proposal of the CEMMPRE for NEI 2023. Since 2004, N.A. Sakharova published 4 book chapters, 40 papers in international peer review journals indexing in ISI; 6 papers in peer-reviewed conference proceedings indexing in ISI; 1 paper in other international journals with referees; 1 paper in national journal with referees; 14 papers in conference proceedings, and 35 abstracts in international conference proceedings, including 24 contributions with own oral presentation. She was a member of the Fiscal Board of SPMicros (Sociedade Portuguesa de Microscopia), biennium 2018-2019 and supervised six M.Sc. works since 2011.
Read full resume ↓
Identification

Personal identification

Full name
Nataliya Sakharova

Citation names

  • Sakharova, Nataliya
  • N.A. Sakharova

Author identifiers

Ciência ID
2718-6F89-F823
ORCID iD
0000-0003-1922-4365

Knowledge fields

  • Engineering and Technology - Mechanical Engineering - Mechanical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Ukrainian (Mother tongue)
Russian (Mother tongue)
English Advanced (C1) Proficiency (C2) Advanced (C1) Advanced (C1)
Portuguese Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2)
French Elementary (A2) Intermediate (B1) Intermediate (B1) Intermediate (B1)
Education
Degree Classification
2018/11/02
Concluded
 PhD degree in Mechanical Engineering (Doutoramento)
Major in Nanomaterials and Micromanufacturing
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"Elastic properties of carbon nanotubes and there heterojunctions: numerical evaluation" (THESIS/DISSERTATION)
 APDL/19
1999/12/08
Concluded
 PhD degree in Physical and Mathematical Sciences (Doktor (PhD))
Major in Solid State Physics
V.N. Karazin Kharkiv National University, Ukraine
"Special features of plastic deformation and failure of two-dimensional copper and aluminium polycrystals" (THESIS/DISSERTATION)
 n/a
1993/07/01
Concluded
 Physics (Licence)
V.N. Karazin Kharkiv National University, Ukraine

Kharkiv State University, Ukraine
"Influence of the triple junctions of grain boundaries on the character of failure of two-dimensional aluminium polycrystals" (THESIS/DISSERTATION)
 n/a
Affiliation

Science

Category
Host institution 		Employer
2019/01/02 - Current Contracted Researcher (Research) Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2018/01/02 - 2019/01/01 Postdoc (Research) Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2016/01/01 - 2017/12/31 Postdoc (Research) Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2015/10/01 - 2015/12/31 Postdoc (Research) Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2013/04/01 - 2015/09/30 Contracted Researcher (Research) Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2008/04/01 - 2013/03/31 Contracted Researcher (Research) Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2004/07/15 - 2008/03/31 Postdoc (Research) Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2002/11/01 - 2004/07/01 Researcher (Research) V.N. Karazin Kharkiv National University, Ukraine
1996/11/01 - 2001/06/01 Researcher (Research) V.N. Karazin Kharkiv National University, Ukraine

Teaching in Higher Education

Category
Host institution 		Employer
2022/09/01 - 2023/08/31 Invited Assistant Professor (University Teacher) Universidade de Coimbra, Portugal
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021/09/01 - 2022/08/31 Invited Assistant Professor (University Teacher) Universidade de Coimbra, Portugal
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2020/09/01 - 2021/08/31 Invited Assistant Professor (University Teacher) Universidade de Coimbra, Portugal
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2019/09/01 - 2020/08/31 Invited Assistant Professor (University Teacher) Universidade de Coimbra, Portugal
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2018/09/01 - 2019/08/31 Invited Assistant Professor (University Teacher) Universidade de Coimbra, Portugal
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2011/09/01 - 2012/08/31 Invited Assistant Professor (University Teacher) Universidade de Coimbra, Portugal
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2010/09/01 - 2011/08/31 Invited Assistant Professor (University Teacher) Universidade de Coimbra, Portugal
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal

Others

Category
Host institution 		Employer
2001/06/01 - 2002/11/01 Maternity leaving V.N. Karazin Kharkiv National University, Ukraine
Projects

Contract

Designation Funders
2021/01/01 - 2025/12/31 Advanced Production and Intelligent Systems
LA/P/0112/2020
10.54499/LA/P/0112/2020
Instituto Politécnico de Leiria, Portugal

Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Universidade do Minho, Portugal

Universidade de Lisboa Faculdade de Letras, Portugal

Universidade de Coimbra, Portugal

Centro de Investigação em Sistemas e Tecnologias, Portugal

Instituto para a Sustentabilidade e Inovação em Estruturas de Engenharia, Portugal

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2019/01/01 - 2019/12/31 Centro de Engenharia Mecânica
UID/EMS/00285/2019
Universidade do Porto, Portugal

Universidade de Trás-os-Montes e Alto Douro, Portugal

Universidade de Coimbra, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2018/01/01 - 2018/12/31 MATIS - Materiais e Tecnologias Industriais Sustentáveis
Centro 2020 000014 MATIS 2020
Post-doc Fellow
Universidade de Coimbra, Portugal

Instituto Politécnico de Leiria, Portugal
Concluded
2015/10/01 - 2015/12/31 PS0261 - PSE – ARSOPI - SPECIALWELD – Weldability of high resistant corrosion metals submitted to extreme working conditions
PS0261 - PSE – ARSOPI - SPECIALWELD
Post-doc Fellow
Universidade de Coimbra, Portugal
 ARSOPI, S.A.
Concluded
2012/01/01 - 2015/12/31 Mechanical modelling and numerical simulation of the behaviour of carbon nanotubes
PTDC/EME-TME/122472/2010
Researcher
Universidade de Coimbra, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2013/04/01 - 2015/09/30 MT4MOBI- Materials and Technologies for Greener Manufacturing & Products Applied to Mobility
QREN Mais Centro SCT_2011_02_001_4637
Investigador Auxiliar Convidado
Autoridade de Gestão do Programa Operacional Competitividade e Internacionalização
Concluded
2011/01/01 - 2014/12/31 Characterization of the constitutive behavior of metal sheets from a single multi-path-experimental-test by inverse analysis
PTDC/EME-TME/113410/2009
Researcher
Universidade de Coimbra, Portugal
 Fundacao para a Computacao Cientifica Nacional
Concluded
2011/01/01 - 2012/12/31 Projecto Estratégico - UI 285 - 2011-2012
PEst-C/EME/UI0285/2011
Universidade de Coimbra, Portugal

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2005/01/01 - 2008/12/31 Evaluation of mechanical properties of thin films by nanoindentation: numerical simulation and experimental validation
POCI/EME/57510/2004
Researcher
Universidade de Coimbra, Portugal

Universidade de Aveiro, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2005/01/01 - 2008/12/31 Making bridges between 2D and 3D nc- materials
POCI/CTM/55970/2004
Researcher
Universidade de Coimbra, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
Outputs

Publications

Book chapter
  1. A. Sakharova, Nataliya; M. Antunes, Jorge; F.G. Pereira, André; M. Chaparro, Bruno; V. Fernandes, José. Corresponding author: A. Sakharova, Nataliya. "Numerical Simulation of the Mechanical Behaviour of Boron Nitride Nanosheets and Nanotubes". In Boron- Boron Compounds and Boron-Based Materials and Structures. IntechOpen, 2023.
    Published • 10.5772/intechopen.111868
  2. Sakharova, Nataliya A.; Antunes, Jorge M.; Pereira, André F. G.; Oliveira, Marta C.; Fernandes, José V.. Corresponding author: Sakharova, Nataliya A.. "The Effect of Vacancy Defects on the Evaluation of the Mechanical Properties of Single-Wall Carbon Nanotubes: Numerical Simulation Study". In Mechanical and Materials Engineering of Modern Structure and Component Design, edited by Andreas Öchsner; Holm Altenbach, 323-339. Germany: Springer International Publishing, 2015.
    Published • 10.1007/978-3-319-19443-1_26
  3. Antunes, Jorge M.; Fernandes, José V.; Sakharova, Natalyia A.. Corresponding author: Antunes, Jorge M.. "Mechanical characterization of thin films by depth-sensing indentation". In Anti-Abrasive Nanocoatings: Current and future applications, edited by Mahmood Aliofkhazraei, 407-425. United Kingdom: Woodhead Publishing, 2014.
    Published • 10.1016/b978-0-85709-211-3.00016-9
  4. Fernandes, José Valdemar; Sakharova, Nataliya; Antunes, J.M.; Oliveira, Marta C.. "Mechanical Properties Evaluation of Bulk and Coated Material by Depth Sensing Indentation". In Nanocomposites and Polymers with Analytical Methods, edited by John Cuppoletti, 131-148. Intech, 2011.
    Published • DOI: 10.5772/21288
Conference abstract
  1. N.A. Sakharova; J.M. Antunes; Pereira, A.F.G.; Fernandes, José Valdemar. "Mechanical Properties of Two-Dimensional Metal Nitrides: Numerical Simulation Study". Paper presented in 17th International Conference on Advanced Computational Engineering and Experimenting, ACEX2024, Barcelona, 2024.
    Published
  2. N.A. Sakharova; Jorge M. Antunes; Pereira, A.F.G.; Fernandes, José Valdemar. Corresponding author: N.A. Sakharova. "Numerical simulation study of the elastic properties of singe-walled silicon carbide nanotubes". Paper presented in 16th International Conference on Advanced Computational Engineering and Experimenting, ACEX 2023, Heraklion, Crete, 2023.
    Published
  3. N.A. Sakharova; Antunes, J.M.; Pereira, A.F.G.. "Numerical Simulation Study on Elastic Properties of Aluminium Nitride, Gallium Nitride, Indium Nitride Nanotubes and Nanosheets". Paper presented in 15th International (Hybrid) Conference on Advanced Computational Engineering and Experimenting, ACEX 2022, Florence, 2022.
    Published
  4. N.A. Sakharova; Antunes, J.M.; Pereira, A.F.G.; Fernandes, José Valdemar. "On Determination of Elastic Properties of III Group Elements - Phosphide Nanotubes: Numerical Simulation Study". Paper presented in 14th International (Hybrid) Conference on Advanced Computational Engineering and Experimenting, ACEX 2021, 2021.
    Published
  5. Sakharova, Nataliya; J.M. Antunes; Fernandes, José Valdemar. "Numerical simulation of the mechanical behaviour of non-carbon nanotubes". Paper presented in 12th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2018, Amsterdam, 2018.
    Published
  6. N.A. Sakharova; J.M. Antunes; Pereira, A.F.G.; B.M. Chaparro; Fernandes, José Valdemar. Corresponding author: N.A. Sakharova. "Elastic properties of carbon nanotubes and their heterojunctions". Paper presented in XIV International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS 2017), Barcelona, 2017.
    Published
  7. N.A. Sakharova; J.M. Antunes; B.M. Chaparro; Fernandes, José Valdemar. Corresponding author: N.A. Sakharova. "Modelling of carbon nanotube ordered two-dimensional structures". Paper presented in 11th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2017, Vienna, 2017.
    Published
  8. N.A. Sakharova; Pereira, A.F.G.; J.M. Antunes; Fernandes, José Valdemar. Corresponding author: N.A. Sakharova. "Numerical simulation on the mechanical behaviour of the multi-walled carbon nanotubes". Paper presented in 10th International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2016), Split, 2016.
    Published
  9. N.A. Sakharova; Pereira, A.F.G.; J.M. Antunes; Fernandes, José Valdemar. Corresponding author: N.A. Sakharova. "Numerical simulation of the mechanical behaviour of single-walled carbon nanotubes heterojunctions". Paper presented in 9th International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2015), Munich, 2015.
    Published
  10. N.A. Sakharova; J.M. Antunes; Pereira, A.F.G.; Oliveira, Marta C.; Fernandes, José Valdemar. Corresponding author: N.A. Sakharova. "The effect of vacancy defects on the evaluation of the mechanical properties of single-wall carbon nanotubes: Numerical simulation study". Paper presented in 8th International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2014), Paris, 2014.
    Published
  11. Fernandes, J. V.; Prates, P. A.; Oliveira, M. C.; Sakharova, N. A.. "INVERSE ANALYSIS FOR CONSTITUTIVE PARAMETERS IDENTIFICATION OF METAL SHEETS USING A SINGLE TEST". Paper presented in Icem15: 15th International Conference on Experimental Mechanics, Porto, 2012.
    Published
  12. R.M. Branco; P.A. Prates; M.C. Oliveira; N.A. Sakharova; Fernandes, José Valdemar. "Numerical study of mechanical behaviour of heterogeneous materials". Paper presented in VI International Materials Symposium: MATERIALS 2011, Guimarães, 2011.
    Published
  13. N.A. Sakharova; Fernandes, José Valdemar; M.C. Oliveira; J.M. Antunes. Corresponding author: N.A. Sakharova. "On the Determination of Mechanical Properties of a Material with Residual Stresses by Indentation: Numerical Simulation Study". Paper presented in IV European Congress on Computational Mechanics (ECCM IV): Solids, Structures and Coupled Problems in Engineering, Paris, 2010.
    Published
  14. N.A. Sakharova; Fernandes, José Valdemar; J.M. Antunes; M.C. Oliveira. Corresponding author: N.A. Sakharova. "A numerical study of mechanical behaviour of multilayer composites under depth-sensing indentation". Paper presented in 8th World Congress on Computational Mechanics (WCCM8) and 5th. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, 2008.
    Published
  15. N.A. Sakharova; Fernandes, José Valdemar. Corresponding author: N.A. Sakharova. "Strain path change effect on microstructural evolution of small grain size brass". Paper presented in INCOMAM’07, International Conference on Microscopy and Microanalysis, XLII Congress of the Portuguese Microscopy Society, Coimbra, 2007.
    Published
  16. N.A. Sakharova; M.M. Vieira; Fernandes, José Valdemar; M.F. Vieira. Corresponding author: N.A. Sakharova. "Strain path change effect on deformation behaviour of materials with low-to-moderate stacking fault energy". Paper presented in 4th International Materials Symposium: Materials 2007, Porto, 2007.
    Published
  17. J.M. Antunes; N.A. Sakharova; M.C. Oliveira; Fernandes, José Valdemar; L.F. Menezes. "A single measurement for thin films young´s modulus determination using depth sensing indentation". Paper presented in 4th International Materials Symposium: Materials 2007, Porto, 2007.
    Published
  18. N.A. Sakharova; Fernandes, José Valdemar. Corresponding author: N.A. Sakharova. "Dislocation Microstructure in Copper Multicrystals Deformed under the Sequences: Rolling - Tension and Tension - Rolling". Paper presented in 3th International Materials Symposium: Materials´2005, Aveiro, 2005.
    Published
  19. J.M. Antunes; N.A. Sakharova; Fernandes, José Valdemar; L.F. Menezes. "Strain and Stress Distribution in Vickers Indentation of Coated Materials". Paper presented in 3th International Materials Symposium: Materials’2005, Aveiro, 2005.
    Published
Conference paper
  1. Prates, P.; Pereira, A.; Fernandes, J.; Sakharova, N.. "On the Development of Dataset Supported Strategies for the Constitutive Parameters Identification of Metal Sheets". Paper presented in 16th International Conference on Computational Plasticity: Fundamentals and Applications, COMPLAS 2021, Barcelona, 2021.
    Published
  2. Sakharova, N.A.; Antunes, J.M.; Pereira, A.F.G.; Chaparro, B.M.; Fernandes, J.V.. Corresponding author: Sakharova, N.A.. "Elastic properties of carbon nanotubes and their heterojunctions". Paper presented in 14th International Conference on Computational Plasticity - Fundamentals and Applications, COMPLAS 2017, Barcelona, 2017.
    Published
  3. N.A. Sakharova; J.M. Antunes; Oliveira, Marta C.; B.M. Chaparro; Brett, Christopher M.A.; Fernandes, José Valdemar. Corresponding author: N.A. Sakharova. "Modelling of single-wall carbon nanotubes mechanical behaviour". Paper presented in 11th World Congress on Computational Mechanics (WCCM XI) 5th European Conference on Computational Mechanics (ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD VI), Barcelona, 2014.
    Published
  4. Prates, P.A.; Fernandes, J.V.; Oliveira, M.C.; Sakharova, N.A.; Menezes, L.F.. "On the characterization of the plastic anisotropy in orthotropic sheet metals with a cruciform biaxial test". 2014.
    Published • 10.1088/1757-899X/10/1/012142
  5. Rodrigues, C.A.; Reis, L.C.; Sakharova, N.A.; Oliveira, M.C.; Fernandes, J.V.. Corresponding author: Sakharova, N.A.. "On the characterization of the plastic behaviour of sheet metals with bulge tests: Numerical simulation study". Paper presented in 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Vienna, 2012.
    Published
  6. L.C. Reis; C.A. Rodrigues; M.C. Oliveira; N.A. Sakharova; Fernandes, José Valdemar. "Characterization of the plastic behavior of sheet metal using the hydraulic bulge test". Paper presented in YIC 2012, First ECCOMAS Young Investigators Conference on Computational Methods in Applied Sciences, Aveiro, 2012.
    Published
  7. A.X. Martins; M.I. Simões; J.M. Antunes; N.A. Sakharova; M.C. Oliveira; Fernandes, José Valdemar. Corresponding author: N.A. Sakharova. "Numerical Simulation Study on Four-Sided Pyramidal and Flat Indentation Tests". Paper presented in YIC 2012, First ECCOMAS Young Investigators Conference on Computational Methods in Applied Sciences, Aveiro, 2012.
    Published
  8. P.A. Prates; Fernandes, José Valdemar; Oliveira, Marta C.; N.A. Sakharova. "Methodology for Constitutive Parameters Identification of Metal Sheets with a Biaxial Tensile Test on a Flat Cruciform Specimen". Paper presented in YIC 2012, First ECCOMAS Young Investigators Conference on Computational Methods in Applied Sciences, Aveiro, 2012.
    Published
  9. Branco, R.M.; Prates, P.A.; Oliveira, M.C.; Sakharova, N.A.; Fernandes, J.V.. "Plastic deformation of heterogeneous materials: Numerical simulation study". Paper presented in XI International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS XI), Barcelona, 2011.
    Published
  10. Simões, M.I.; Martins, A.X.; Antunes, J.M.; Sakharova, N.A.; Oliveira, M.C.; Fernandes, J.V.. Corresponding author: Sakharova, N.A.. "Numerical simulation study of the Knoop indentation test". Paper presented in XI International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS XI), Barcelona, 2011.
    Published
  11. L.C. Reis; P.A. Prates; M.C. Oliveira; N.A. Sakharova; Fernandes, José Valdemar. "Caracterização do comportamento plástico de chapas metálicas com recurso ao ensaio de expansão biaxial simétrica". Paper presented in CMNE 2011, Congresso de Métodos Numéricos e Computacionais em Engenharia, Coimbra, 2011.
    Published
  12. M.I. Simões; A.X. Martins; J.M. Antunes; M.C. Oliveira; Fernandes, José Valdemar; N.A. Sakharova. "Comparative numerical simulation study of knoop and vickers indentation tests". Paper presented in CMNE 2011, Congresso de Métodos Numéricos e Computacionais em Engenharia, Coimbra, 2011.
    Published
  13. P.A. Prates; Oliveira, Marta C.; Fernandes, José Valdemar; N.A. Sakharova. "Inverse analysis methodology for constitutive parameters identification of metal sheets using a cruciform tensile specimen". Paper presented in CMNE 2011, Congresso de Métodos Numéricos e Computacionais em Engenharia, Coimbra, 2011.
    Published
  14. N.A. Sakharova; R.M. Branco; P.A. Prates; M.C. Oliveira; Fernandes, José Valdemar. Corresponding author: N.A. Sakharova. "Estudo numérico sobre o comportamento mecânico de materiais heterogéneos". Paper presented in CMNE 2011, Congresso de Métodos Numéricos e Computacionais em Engenharia, Coimbra, 2011.
    Published
  15. J.V. Fernandes; N.A. Sakharova; M.C Oliveira; J.M. Antunes. "Análise inversa em nanoindentação". Paper presented in 8º Congresso Nacional de Mecânica Experimental, Guimarães, 2010.
    Published
  16. N.A. Sakharova; Fernandes, José Valdemar; M.C. Oliveira. Corresponding author: N.A. Sakharova. "Simulação Numérica da Influência de Tensões Residuais na Dureza de Materiais Maciços". Paper presented in CMNI’09, Congreso de Métodos Numéricos en Ingeniería, Barcelona, 2009.
    Published
  17. N.A. Sakharova; Fernandes, José Valdemar; Oliveira, Marta C.. Corresponding author: N.A. Sakharova. "Numerical study on the influence of the substrate hardness on the behaviour of hard film/substrate composites under depth-sensing indentation". Paper presented in II International Conference on Computational Methods for Coupled Problems in Science and Engineering, Coupled Problems 2009, Ischia, 2009.
    Published
  18. N.A. Sakharova; Fernandes, José Valdemar; Oliveira, Marta C.; J.M. Antunes. "A Numerical Study on the Mechanical Behaviour of Hard Coatings with Ductile Interlayers under Depth-Sensing Indentation". Paper presented in V International Materials Symposium: MATERIALS 2009, Lisboa, 2009.
    Published
  19. N.A. Sakharova; Fernandes, J.V.; Antunes, J.M.; Oliveira, Marta C.. Corresponding author: N.A. Sakharova. "A numerical study of influence of the indenter geometry on depth sensing indentation results". Paper presented in IX International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS 2007), Barcelona, 2007.
    Published
  20. N.A. Sakharova; Fernandes, José Valdemar; J.M. Antunes; Oliveira, Marta C.; M.F.M. Simões; M.A.O. Brett. Corresponding author: N.A. Sakharova. "Application of numerical simulation for reverse analysis in depth sensing indentation of coated". Paper presented in International Conference on Computational Methods for Coupled Problems in Science and Engineering, COUPLED PROBLEMS´07, Santa Eulalia, Ibiza, 2007.
    Published
Journal article
  1. Nataliya Sakharova; André Pereira; Jorge Antunes. "Mechanical Properties of Two-Dimensional Metal Nitrides: Numerical Simulation Study". Nanomaterials (2024): https://doi.org/10.3390/nano14211736.
    10.3390/nano14211736
  2. Nataliya A. Sakharova; André F. G. Pereira; Jorge M. Antunes; Bruno M. Chaparro; Tomás G. Parreira; José V. Fernandes. "On the Determination of Elastic Properties of Single-Walled Nitride Nanotubes Using Numerical Simulation". Materials (2024): https://doi.org/10.3390/ma17102444.
    Published • 10.3390/ma17102444
  3. Tomás G. Parreira; Diogo C. Rodrigues; Marta C. Oliveira; Nataliya A. Sakharova; Pedro A. Prates; André F. G. Pereira. "Sensitivity Analysis of the Square Cup Forming Process Using PAWN and Sobol Indices". Metals (2024): https://doi.org/10.3390/met14040432.
    10.3390/met14040432
  4. Parreira, Tomás G.; Marques, Armando E.; Sakharova, Nataliya A.; Prates, Pedro A.; Pereira, André F. G.. "Identification of Sheet Metal Constitutive Parameters Using Metamodeling of the Biaxial Tensile Test on a Cruciform Specimen". Metals 14 2 (2024): 212. http://dx.doi.org/10.3390/met14020212.
    10.3390/met14020212
  5. Sakharova, Nataliya A.; Antunes, Jorge M.; Pereira, André F. G.; Chaparro, Bruno M.; Parreira, Tomás G.; Fernandes, José V.. Corresponding author: Sakharova, Nataliya A.. "Numerical Evaluation of the Elastic Moduli of AlN and GaN Nanosheets". Materials 17 4 (2024): 799. http://dx.doi.org/10.3390/ma17040799.
    Open access • Published • 10.3390/ma17040799
  6. Nataliya A. Sakharova; André F. G. Pereira; Jorge M. Antunes. Corresponding author: Nataliya A. Sakharova. "A Study of the Mechanical Behaviour of Boron Nitride Nanosheets Using Numerical Simulation". Nanomaterials 13 20 (2023): 2759. https://doi.org/10.3390/nano13202759.
    Open access • Published • 10.3390/nano13202759
  7. José V. Fernandes; André F. G. Pereira; Jorge M. Antunes; Bruno M. Chaparro; Nataliya A. Sakharova. Corresponding author: Nataliya A. Sakharova. "Numerical Simulation Study of the Mechanical Behaviour of 1D and 2D Germanium Carbide and Tin Carbide Nanostructures". Materials 16 15 (2023): 5484. https://doi.org/10.3390/ma16155484.
    Open access • Published • 10.3390/ma16155484
  8. Nataliya A. Sakharova; André F. G. Pereira; Jorge M. Antunes; Bruno M. Chaparro; José V. Fernandes. Corresponding author: Nataliya A. Sakharova. "On the Determination of Elastic Properties of Indium Nitride Nanosheets and Nanotubes by Numerical Simulation". Metals 13 1 (2022): 73. https://doi.org/10.3390/met13010073.
    Open access • Published • 10.3390/met13010073
  9. Nataliya A. Sakharova; André F. G. Pereira; Jorge M. Antunes. Corresponding author: Nataliya A. Sakharova. "Elastic Moduli of Non-Chiral Singe-Walled Silicon Carbide Nanotubes: Numerical Simulation Study". Materials 15 22 (2022): 8153. https://doi.org/10.3390/ma15228153.
    Open access • Published • 10.3390/ma15228153
  10. N.A. Sakharova. "Numerical Modelling of the Mechanical Behaviour of Carbon and Non-Carbon Nanotubes and Their Complex Structures". Materials (2022): https://doi.org/10.3390/ma15217515.
    Open access • Published • 10.3390/ma15217515
  11. Nataliya Sakharova; Jorge Antunes; André Pereira; Bruno Chaparro; José Fernandes. Corresponding author: Nataliya Sakharova. "Elastic Properties of Single-Walled Phosphide Nanotubes: Numerical Simulation Study". Nanomaterials 12 14 (2022): 2360. https://doi.org/10.3390/nano12142360.
    Open access • Published • 10.3390/nano12142360
  12. Jorge M. Antunes; André F. G. Pereira; Nataliya A. Sakharova. Corresponding author: Jorge M. Antunes. "Overview on the Evaluation of the Elastic Properties of Non-Carbon Nanotubes by Theoretical Approaches". Materials 15 19 (2022): 3325. https://doi.org/10.3390/ma15093325.
    Open access • Published • 10.3390/ma15093325
  13. N.A. Sakharova; J.M. Antunes; André F. G. Pereira; Bruno M. Chaparro; J.V. Fernandes. Corresponding author: N.A. Sakharova. "On the Determination of Elastic Properties of Single-Walled Boron Nitride Nanotubes by Numerical Simulation". Materials 14 12 (2021): 3183. https://www.mdpi.com/1996-1944/14/12/3183.
    Open access • Published • 10.3390/ma14123183
  14. Pereira, André F. G.; Antunes, Jorge M.; Fernandes, José V.; Sakharova, Nataliya. Corresponding author: Sakharova, Nataliya. "Mechanical Characterisation of Single-Walled Carbon Nanotube Heterojunctions: Numerical Simulation Study". Materials 13 22 (2020): 5100. http://dx.doi.org/10.3390/ma13225100.
    Open access • Published • 10.3390/ma13225100
  15. N.A. Sakharova; André F. G. Pereira; J.M. Antunes; J.V. Fernandes. Corresponding author: N.A. Sakharova. "Mechanical Characterization of Multiwalled Carbon Nanotubes: Numerical Simulation Study". Materials 13 19 (2020): 4283. https://www.mdpi.com/1996-1944/13/19/4283.
    Open access • Published • 10.3390/ma13194283
  16. Marques, Armando E.; Prates, Pedro A.; Pereira, André F. G.; Sakharova, Nataliya A.; Oliveira, Marta C.; Fernandes, José V.. Corresponding author: Prates, Pedro A.. "Numerical Study on the Forming Behaviour of Multilayer Sheets". Metals 10 6 (2020): 716. http://dx.doi.org/10.3390/met10060716.
    Open access • Published • 10.3390/met10060716
  17. Simões, M.I.; Antunes, J.M.; Fernandes, J.V.; Sakharova, N.A.. Corresponding author: Antunes, J.M.. "Numerical simulation of the depth-sensing indentation test with knoop indenter". Metals 8 11 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85056212159&partnerID=MN8TOARS.
    Open access • Published • 10.3390/met8110885
  18. Sakharova, N.A.; Antunes, J.M.; Pereira, A.F.; Fernandes, J.V.. Corresponding author: Sakharova, N.A.. "Developments in the evaluation of elastic properties of carbon nanotubes and their heterojunctions by numerical simulation". AIMS Materials Science 4 3 (2017): 706-737. http://www.scopus.com/inward/record.url?eid=2-s2.0-85037157364&partnerID=MN8TOARS.
    Open access • Published • 10.3934/matersci.2017.3.706
  19. Sakharova, N.A.; Pereira, A.F.G.; Antunes, J.M.; Fernandes, J.V.. Corresponding author: Sakharova, N.A.. "Numerical simulation of the mechanical behaviour of the multi-walled carbon nanotubes". Journal of Nano Research 47 (2017): 106-119. http://www.scopus.com/inward/record.url?eid=2-s2.0-85019075796&partnerID=MN8TOARS.
    Published • 10.4028/www.scientific.net/JNanoR.47.106
  20. Sakharova, N.A.; Pereira, A.F.G.; Antunes, J.M.; Fernandes, J.V.. Corresponding author: Sakharova, N.A.. "Numerical simulation study of the elastic properties of single-walled carbon nanotubes containing vacancy defects". Composites Part B: Engineering 89 (2016): 155-168. http://www.scopus.com/inward/record.url?eid=2-s2.0-84951087886&partnerID=MN8TOARS.
    Published • 10.1016/j.compositesb.2015.11.029
  21. Prates, P.A.; Pereira, A.F.G.; Sakharova, N.A.; Oliveira, M.C.; Fernandes, J.V.. "Inverse Strategies for Identifying the Parameters of Constitutive Laws of Metal Sheets". Advances in Materials Science and Engineering 2016 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84990841999&partnerID=MN8TOARS.
    Published • 10.1155/2016/4152963
  22. Pereira, A.F.G.; Fernandes, J.V.; Antunes, J.M.; Sakharova, N.A.. Corresponding author: Sakharova, N.A.. "Shear modulus and Poisson's ratio of single-walled carbon nanotubes: Numerical evaluation". Physica Status Solidi (B) Basic Research 253 2 (2016): 366-376. http://www.scopus.com/inward/record.url?eid=2-s2.0-84957854912&partnerID=MN8TOARS.
    Published • 10.1002/pssb.201552320
  23. Sakharova, N.A.; Pereira, A.F.G.; Antunes, J.M.; Fernandes, J.V.. Corresponding author: Sakharova, N.A.. "Numerical simulation of the mechanical behaviour of single-walled carbon nanotube heterojunctions". Journal of Nano Research 38 (2016): 73-87. http://www.scopus.com/inward/record.url?eid=2-s2.0-84954048946&partnerID=MN8TOARS.
    Published • 10.4028/www.scientific.net/JNanoR.38.73
  24. Sakharova, N.A.; Pereira, A.F.G.; Antunes, J.M.; Brett, C.M.A.; Fernandes, J.V.. Corresponding author: Sakharova, N.A.. "Mechanical characterization of single-walled carbon nanotubes: Numerical simulation study". Composites Part B: Engineering 75 (2015): 73-85. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922570937&partnerID=MN8TOARS.
    Published • 10.1016/j.compositesb.2015.01.014
  25. Pereira, A.F.G.; Prates, P.A.; Sakharova, N.A.; Oliveira, M.C.; Fernandes, J.V.. "On the identification of kinematic hardening with reverse shear test". Engineering with Computers 31 4 (2015): 681-690. http://www.scopus.com/inward/record.url?eid=2-s2.0-84941413636&partnerID=MN8TOARS.
    Published • 10.1007/s00366-014-0369-7
  26. Branco, Rui M.; Prates, Pedro; Oliveira, Marta C.; Sakharova, Nataliya A.; Fernandes, J. Valdemar. Corresponding author: Sakharova, Nataliya A.. "Numerical Study of Mechanical Behaviour of Heterogeneous Materials". Materials Science Forum 730-732 (2013): 549-554. http://dx.doi.org/10.4028/www.scientific.net/msf.730-732.549.
    Published • 10.4028/www.scientific.net/msf.730-732.549
  27. Prates, Pedro; Oliveira, M.C.; Sakharova, Nataliya A.; Fernandes, José Valdemar. "How to Combine the Parameters of the Yield Criteria and the Hardening Law". Key Engineering Materials 554-557 (2013): 1195-1202. http://dx.doi.org/10.4028/www.scientific.net/kem.554-557.1195.
    Published • 10.4028/www.scientific.net/kem.554-557.1195
  28. Sakharova, N.A.; Oliveira, M.C.; Antunes, J.M.; Fernandes, J.V.. Corresponding author: Sakharova, N.A.. "On the determination of the film hardness in hard film/substrate composites using depth-sensing indentation". Ceramics International 39 6 (2013): 6251-6263. http://www.scopus.com/inward/record.url?eid=2-s2.0-84877707225&partnerID=MN8TOARS.
    Published • 10.1016/j.ceramint.2013.01.046
  29. Prates, P.A.; Fernandes, J.V.; Oliveira, M.C.; Sakharova, N.A.. "Inverse analysis methodology on metal sheets for constitutive parameters identification". International Journal of Materials Engineering Innovation 4 2 (2013): 101-116. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879028539&partnerID=MN8TOARS.
    Published • 10.1504/IJMATEI.2013.054390
  30. Jamshidi Aval, H.; Serajzadeh, S.; Sakharova, N.A.; Kokabi, A.H.; Loureiro, A.. "A study on microstructures and residual stress distributions in dissimilar friction-stir welding of AA5086-AA6061". Journal of Materials Science 47 14 (2012): 5428-5437. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861102190&partnerID=MN8TOARS.
    Published • 10.1007/s10853-012-6430-2
  31. Sakharova, N.A.; Prates, P.A.; Oliveira, M.C.; Fernandes, J.V.; Antunes, J.M.. Corresponding author: Sakharova, N.A.. "A simple method for estimation of residual stresses by depth-sensing indentation". Strain 48 1 (2012): 75-87. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856602116&partnerID=MN8TOARS.
    Published • 10.1111/j.1475-1305.2010.00800.x
  32. Leal, R.M.; Sakharova, N.; Vilaça, P.; Rodrigues, D.M.; Loureiro, A.. "Effect of shoulder cavity and welding parameters on friction stir welding of thin copper sheets". Science and Technology of Welding and Joining 16 2 (2011): 146-152. http://www.scopus.com/inward/record.url?eid=2-s2.0-79951971889&partnerID=MN8TOARS.
    Published • 10.1179/1362171810Y.0000000005
  33. Sakharova, Nataliya A.; Fernandes, José Valdemar; Oliveira, Marta C.; Antunes, Jorge M.. "A Numerical Study on the Mechanical Behaviour of Hard Coatings with Ductile Interlayers under Depth-Sensing Indentation". Materials Science Forum 636-637 (2010): 1194-1198. http://dx.doi.org/10.4028/www.scientific.net/msf.636-637.1194.
    Published • 10.4028/www.scientific.net/msf.636-637.1194
  34. Fernandes, J.V.; Antunes, J.M.; Sakharova, N.A.; Oliveira, M.C.; Menezes, L.F.. "Young's modulus of thin films using depth-sensing indentation". Philosophical Magazine Letters 90 1 (2010): 9-22. http://www.scopus.com/inward/record.url?eid=2-s2.0-76449083525&partnerID=MN8TOARS.
    Published • 10.1080/09500830903334312
  35. Sakharova, N.A.; Fernandes, J.V.; Oliveira, M.C.; Antunes, J.M.. "Influence of ductile interlayers on mechanical behaviour of hard coatings under depth-sensing indentation: A numerical study on TiAlN". Journal of Materials Science 45 14 (2010): 3812-3823. http://www.scopus.com/inward/record.url?eid=2-s2.0-77953290733&partnerID=MN8TOARS.
    Published • 10.1007/s10853-010-4436-1
  36. Fernandes, José Valdemar; N.A. Sakharova; Oliveira, Marta C.; J.M. Antunes. "Análise Inversa em Nanoindentação". Mecânica Experimental 18 (2010): 11-22.
    Published
  37. N.A. Sakharova; Fernandes, J.V.; Vieira, M.F.. Corresponding author: Vieira, M.F.. "Strain path and work-hardening behavior of brass". Materials Science and Engineering A 507 1-2 (2009): 13-21. http://www.scopus.com/inward/record.url?eid=2-s2.0-61649124896&partnerID=MN8TOARS.
    Published • 10.1016/j.msea.2009.01.006
  38. N.A. Sakharova; Fernandes, J.V.; Antunes, J.M.; Oliveira, M.C.. "Comparison between Berkovich, Vickers and conical indentation tests: A three-dimensional numerical simulation study". International Journal of Solids and Structures 46 5 (2009): 1095-1104. http://www.scopus.com/inward/record.url?eid=2-s2.0-58649117555&partnerID=MN8TOARS.
    Published • 10.1016/j.ijsolstr.2008.10.032
  39. Antunes, J.M.; Fernandes, J.V.; N.A. Sakharova; Menezes, L.F.. "Reverse analysis in depth-sensing indentation for evaluation of the Young's modulus of thin films". Philosophical Magazine 88 3 (2008): 313-325. http://www.scopus.com/inward/record.url?eid=2-s2.0-39149103357&partnerID=MN8TOARS.
    Published • 10.1080/14786430701832404
  40. N.A. Sakharova; Vieira, M.M.; Fernandes, J.V.; Vieira, M.F.. Corresponding author: N.A. Sakharova. "Strain path change effect on deformation behaviour of materials with low-to-moderate stacking fault energy". Materials Science Forum 587-588 (2008): 420-424. http://www.scopus.com/inward/record.url?eid=2-s2.0-60349087272&partnerID=MN8TOARS.
    Published
  41. Antunes, J.M.; Fernandes, J.V.; N.A. Sakharova; Oliveira, M.C.; Menezes, L.F.. "On the determination of the Young's modulus of thin films using indentation tests". International Journal of Solids and Structures 44 25-26 (2007): 8313-8334. http://www.scopus.com/inward/record.url?eid=2-s2.0-35548945419&partnerID=MN8TOARS.
    Published • 10.1016/j.ijsolstr.2007.06.015
  42. N.A. Sakharova; Fernandes, José Valdemar. "Strain path change effect on dislocation microstructure of multicrystalline copper sheets". Materials Chemistry and Physics 98 1 (2006): 44-50. http://www.scopus.com/inward/record.url?eid=2-s2.0-33748802544&partnerID=MN8TOARS.
    Published • 10.1016/j.matchemphys.2006.01.038
  43. Antunes, J.M.; N.A. Sakharova; Fernandes, J.V.; Menezes, L.F.. "Strain and stress distribution in vickers indentation of coated materials". Materials Science Forum 514-516 (2006): 1472-1476. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849033155&partnerID=MN8TOARS.
    Published
  44. N.A. Sakharova; Fernandes, José Valdemar. "Dislocation microstructure in copper multicrystals deformed under the sequences: Rolling - Tension and tension - Rolling". Materials Science Forum 514-516 (2006): 589-593. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849044534&partnerID=MN8TOARS.
    Published
  45. Dr. E.E. Badiyan; Tonkopryad, A.G.; N.A. Sakharova; Shekhovtsov, O.V.; Shurinov, R.V.. "Carring out Quantitative Metallographic Analyze with Using of Computer Technlology (Work translated title from Russian)". Industrial laboratory (Zavodskaya Laboratoria) 71 2 (2005): 32-34.
    Published
  46. Dr. E.E. Badiyan; Tonkopryad, A.G.; N.A. Sakharova; Shekhovtsov, O.V.; Shurinov, R.V.. "The Influnece of Grain Boundaries and Deformation Origin Boundaries on the Development of Plastic Deformation in Two-dimensional Copper and Aluminium polycrystals (Work translated title from Russian)". Deformation and Fracture of Materials (Deformatsiya i Razrushenie materialov) 11 (2005): 24-27.
    Published
  47. Badlyan, Ye.Yu.; Tonkopryad, A.G.; Sakharova, N.O.; Shekhovtsov, O.V.; Shurinov, R.V.. "Atomic structure and energy of rigid boundaries of grains of F.C.C. crystals". Metallofizika i Noveishie Tekhnologii 26 6 (2004): 809-819. http://www.scopus.com/inward/record.url?eid=2-s2.0-8644272389&partnerID=MN8TOARS.
    Published
  48. Dr. E.E. Badiyan; Tonkopryad, A.G.; N.A. Sakharova; Shekhovtsov, O.V.; Shurinov, R.V.. "Structural Relaxation at Plastic Deformation of Two-Dimensional Polycrystals with F.C.C.-lattice". Functional Materials 11 2 (2004): 402-404. http://functmaterials.org.ua/contents/11-2/FM112-20.pdf.
    Published
  49. Dr. E.E. Badiyan; Tonkopryad, A.G.; N.A. Sakharova; Shekhovtsov, O.V.; Shurinov, R.V.. "Crystal-geometrical model of grain boundaries structure". Functional Materials 11 4 (2004): 689-695. http://functmaterials.org.ua/contents/11-4/07.pdf.
    Published
  50. Dr. E.E. Badiyan; Tonkopryad, A.G.; N.A. Sakharova; Shekhovtsov, O.V.. "Computerized Procedure for Study of Grain Size Distribution in Polycrystals". Functional Materials 8 2 (2001): 407-410. http://functmaterials.org.ua/common-contents.
    Published
  51. Dr. E.E. Badiyan; Tonkopryad, A.G.; N.A. Sakharova; Shekhovtsov, O.V.. "Study of Distribution of Second Phase Particles and Polycrystals Grains by Sizes (Work translated title from Russian)". Journal of V.N. Karazin Kharkiv National University, series "Physics" 516 5 (2001): 118-120. https://periodicals.karazin.ua/physics/issue/archive.
    Published
  52. Dr. E.E. Badiyan; N.A. Sakharova; O.V. Svinar; Tonkopryad, A.G.; Shekhovtsov, O.V.. "Influence of Heat Treatment in Vacuum on Mechanical Properties of Chromium Steels (Work translated title from Russian)". Journal of V.N. Karazin Kharkiv National University, series "Physics" 476 4 (2000): 164-166. https://periodicals.karazin.ua/physics/issue/archive.
    Published
  53. Dr. E.E. Badiyan; Tonkopryad, A.G.; N.A. Sakharova; Shekhovtsov, O.V.. Corresponding author: N.A. Sakharova. "Special Features of Plastic Deformation and Failure of Two - Dimensional Polycrystals with F.C.C.-lattice (Work translated title from Russian)". Journal of of Tambov University, series "Natural and engineering sciences" 5 2-3 (2000): 207-209.
    Published
  54. Dr. E.E. Badiyan; Tonkopryad, A.G.; N.A. Sakharova; Shekhovtsov, O.V.. "About Form and Extension of Triple Grain Boundary Junctions in Polycrystals (Work translated title from Russian)". Journal of V.N. Karazin Kharkiv National University, series "Physics" 440 3 (1999): 89-92. https://periodicals.karazin.ua/physics/issue/archive.
    Published
  55. Dr. E.E. Badiyan; Tonkopryad, A.G.; N.A. Sakharova. Corresponding author: N.A. Sakharova. "Special Features of Rotational Deformation and Failure of Two - Dimensional Copper and Aluminium Polycrystals (Work translated title from Russian)". Journal of V.N. Karazin Kharkiv National University, series "Physics" 417 1 (1998): 100-105. https://periodicals.karazin.ua/physics/issue/archive.
    Published
  56. Dr. E.E. Badiyan; Tonkopryad, A.G.; N.A. Sakharova. Corresponding author: N.A. Sakharova. "Influence of Triple Grain Boundary Junctions at Plastic Deformation of Polycrystals with F.C.C.-lattice (Work translated title from Russian)". Journal of V.N. Karazin Kharkiv National University, series "Physics" 418 2 (1998): 33-37. https://periodicals.karazin.ua/physics/issue/archive.
    Published
  57. Dr. E.E. Badiyan; Tonkopryad, A.G.; N.A. Sakharova. Corresponding author: N.A. Sakharova. "Rotational Effects at Plastic Deformation of Two - Dimensional Copper and Aluminium Polycrystals". Functional Materials 4 4 (1997): 560-563. http://functmaterials.org.ua/common-contents.
    Published
  58. Dr. E.E. Badiyan; Tonkopryad, A.G.; N.A. Sakharova. Corresponding author: N.A. Sakharova. "Role of Triple Grain Boundary Junctions in Plastic Deformation of Two - Dimensional Aluminium Polycrystals". Functional Materials 4 2 (1997): 318-319. http://functmaterials.org.ua/common-contents.
    Published
  59. Dr. E.E. Badiyan; Tonkopryad, A.G.; N.A. Sakharova. Corresponding author: N.A. Sakharova. "Special Features of Plastic Deformation and Failure of Aluminium Two - Dimensional Polycrystals". Functional Materials 3 1 (1996): 81-83. http://functmaterials.org.ua/common-contents.
    Published
Journal issue
  1. Antunes, J.M.; N.A. Sakharova. "Mechanical Properties of Thin Coatings, Composites and Nanomaterials". Materials 17 (2024): https://www.mdpi.com/journal/materials/special_issues/453DB88E37.
    Submitted • Invited editor
  2. N.A. Sakharova; Pereira, A.F.G.. "Structure, Properties, and Applications of Carbon and Non-carbon Nanotubes". Materials 15 (2023): https://www.mdpi.com/journal/materials/special_issues/noncarbon_nanotube.
    Published • Invited editor
  3. J.M. Antunes; N.A. Sakharova. "Mechanical Properties of Thin Coatings, Composites and Nano Materials". Materials 16 (2023): https://www.mdpi.com/journal/materials/special_issues/Mechanical_Nano_Materials.
    Published • Invited editor
  4. N.A. Sakharova. "Numerical Modelling of Mechanical Behaviour of Carbon and Non-carbon Nanotubes and their Complex Structures". Materials 13, 14 (2021): https://www.mdpi.com/journal/materials/special_issues/numerical_modelling_mechanical_carbon_nanotube_structure.
    Published • Invited editor
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2024/07/04 Mechanical Properties of Two-Dimensional Metal Nitrides: Numerical Simulation Study (Introductory talk) 17th International Conference on Advanced Computational Engineering and Experimenting, ACEX2024
ICC-International Conferences and Courses (Barcelona, Spain)
2023/07/05 Numerical simulation study of the elastic properties of singe-walled silicon carbide nanotubes (Opening talk) 16th International Conference on Advanced Computational Engineering and Experimenting, ACEX 2023
ICC-International Conferences and Courses (Heraklion, Crete, Greece)
2022/07/06 Numerical Simulation Study on Elastic Properties of Aluminium Nitride, Gallium Nitride, Indium Nitride Nanotubes and Nanosheets (Introductory talk) 15th International (Hybrid) Conference on Advanced Computational Engineering and Experimenting, ACEX 2022
ICC-International Conferences and Courses (Florence, Italy)
2021/07/04 On Determination of Elastic Properties of III Group Elements - Phosphide Nanotubes: Numerical Simulation Study (Opening lecture) 14th International (Hybrid) Conference on Advanced Computational Engineering and Experimenting, ACEX 2021
ICC-International Conferences and Courses (Malta, Malta)
2018/07/04 Numerical simulation of the mechanical behaviour of non-carbon nanotubes (Opening talk) 12th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2018
ICC-International Conferences and Courses (Amsterdam, Netherlands)
2017/09/06 Elastic properties of carbon nanotubes and their heterojunctions XIV International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS 2017)
CIMNE (Barcelona, Spain)
2017/07/03 Modelling of carbon nanotube ordered two-dimensional structures (Opening talk) 11th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2017
ICC-International Conferences and Courses (Vienna, Austria)
2016/07/05 Numerical simulation on the mechanical behaviour of the multi-walled carbon nanotubes (Opening talk) 10th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2016
ICC-International Conferences and Courses (Split, Croatia)
2015/06/30 Numerical Simulation of the Mechanical Behaviour of Single-walled Carbon Nanotubes Heterojunctions 9th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2015
ICC-International Conferences and Courses (Munich, Germany)
2014/07/25 Modelling of single-wall carbon nanotubes mechanical behaviour 11th World Congress on Computational Mechanics (WCCM XI) 5th European Conference on Computational Mechanics (ECCM V), 6th European Conference on Computational Fluid Dynamics (ECFD VI)
CIMNE (Barcelona, Spain)
2014/07/03 The effect of vacancy defects on the evaluation of the mechanical properties of single-wall carbon nanotubes: Numerical simulation study 8th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2014
ICC-International Conferences and Courses (Paris, France)
2012/09/12 On the characterization of the plastic behaviour of sheet metals with bulge test: numerical simulation study 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
ECCOMAS Congresses (Vienna, Austria)
2012/04/24 Numerical Simulation Study on Four-Sided Pyramidal and Flat Indentation Tests YIC 2012, First ECCOMAS Young Investigators Conference on Computational Methods in Applied Sciences
CIMNE (Aveiro, Portugal)
2011/09/08 Numerical simulation study of the Knoop indentation test XI International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS XI)
CIMNE (Barcelona, Spain)
2011/06/15 Comparative numerical simulation study of knoop and vickers indentation tests CMNE 2011, Congresso de Métodos Numéricos e Computacionais em Engenharia
SEMNI (Coimbra, Portugal)
2011/06/15 Estudo numérico sobre o comportamento mecânico de materiais heterogéneos CMNE 2011, Congresso de Métodos Numéricos e Computacionais em Engenharia
SEMNI (Coimbra, Portugal)
2011/04/19 Numerical study of mechanical behaviour of heterogeneous materials VI International Materials Symposium: MATERIALS 2011
University of Minho (Guimarães, Portugal)
2010/07/23 On the characterization of the plastic anisotropy in orthotropic sheet metals with a cruciform biaxial test WCCM/APCOM 2010, 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics
IACM (Sidney, Australia)
2010/05/16 On the Determination of Mechanical Properties of a Material with Residual Stresses by Indentation: Numerical Simulation Study (Keynote) IV European Congress on Computational Mechanics (ECCM IV): Solids, Structures and Coupled Problems in Engineering
ECCM (Paris, France)
2009/06/30 Simulação Numérica da Influência de Tensões Residuais na Dureza de Materiais Maciços CMNI’09, Congreso de Métodos Numéricos en Ingeniería
CIMNE (Barcelona, Spain)
2009/06/09 Numerical study on the influence of the substrate hardness on the behaviour of hard film/substrate composites under depth-sensing indentation II International Conference on Computational Methods for Coupled Problems in Science and Engineering, Coupled Problems 2009
CIMNE (Ischia, Italy)
2008/07/01 A numerical study of mechanical behaviour of multilayer composites under depth-sensing indentation 8th. World Congress on Computational Mechanics (WCCM8) and 5th. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008)
ECCOMAS Congresses (Venice, Italy)
2007/09/07 A numerical study of influence of the indenter geometry on depth sensing indentation results IX International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS 2007)
CIMNE (Barcelona, Spain)
2007/05/22 Application of numerical simulation for reverse analysis in depth sensing indentation of coated International Conference on Computational Methods for Coupled Problems in Science and Engineering, COUPLED PROBLEMS´07
CIMNE (Santa Eulalia, Ibiza, Spain)
2007/04/04 Strain path change effect on deformation behaviour of materials with low-to-moderate stacking fault energy 4th International Materials Symposium: Materials 2007
University of Porto (Porto, Portugal)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2023/12/01 - 2024/07/26 Mechanical Behaviour of Non-Carbon Nanotubes: a Numerical simulation study
Supervisor
 Ciências da Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/12/01 - 2024/07/26 Numerical simulation of the mechanical behaviour of multiwalled carbon nanotubes
Supervisor
 Ciências da Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2020/09/01 - 2021/03/12 Database-supported strategy for the material parameter identification of metal sheets/Estratégias de identificação do comportamento plástico de chapas metálicas com recurso a uma base de dados
Co-supervisor of Inês Silva Ribeiro
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2013/01/01 - 2013/09/20 New methodologies for determination of the cinematic strain-hardening law of sheet metals/Novos métodos para a determinação da lei de encruamento cinemático em chapas metálicas
Co-supervisor of André Filipe Gomes Pereira
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2013/03/01 - 2013/06/30 Etudes numérique des essais de dureté avec l´indenteur Knoop (d´année internationale effectuée entre le cinquième et sixième semestre du cursus d´ingénieur IFMA (Institut Français de Mécanique Avancée)
Supervisor of Clémence Godon
 Ciências da Engenharia Mecânica (Other)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2012/01/01 - 2012/07/27 Numerical study of depth-sensing indentation test with Knoop indenter/Estudo numérico do ensaio de dureza com indentador Knoop
Co-supervisor of Antonio Xavier Botelho Martins
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2011/09/01 - 2012/02/10 Determination of work-hardening law of anisotropic sheet metals with bulge tests with circular and elliptical dies/Determinação da lei de encruamento de chapas metálicas anisotrópicas, com recurso ao ensaio de expansão em matrizes circular e elíptica sob pressão hidráulica
Co-supervisor of Carlos André Barata Rodrigues
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2010/09/01 - 2011/02/04 Determination of stress-strain curves of heterogeneous materials: Numerical study/Determinação da curva de tracção de materiais heterogéneos: estudo numérico
Co-supervisor of Rui Miguel de Oliveira Branco
 Engenharia Mecânica (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2023/08/05 - 2024/07/05 Organizer of the Special Session NANOMATERIALS (SS4) of the 17th International Conference on Advanced Computational Engineering and Experimenting, ACEX2024, Barcelona, Spain (2024/07/01 - 2024/07/05)
Conference (Other)
 ICC - International Conferences and Courses Limited, Hong Kong SAR China
2023/06/01 - 2023/09/29 Responsible for the proposal "Sustentabilidade e inclusão CEMMPRE!" from CEMMPRE - Center for Mechanical Engineering, Materials and Processes for the "The European Researchers' Night" (Noite Europeia dos/das Investigadores/as), edition NEI Coimbra 2023 (2023/09/29 - 2023/09/29)
Other
2022/08/05 - 2023/07/07 Organizer of the Special Session NANOMATERIALS (SS4) of the 16th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2023, Heraklion, Crete (Greece) (2023/07/03 - 2023/07/07)
Conference (Other)
 ICC - International Conferences and Courses Limited, Hong Kong SAR China
2021/08/05 - 2022/07/07 Organizer of the Special Session NANOMATERIALS (SS4) 15th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2022, Florence, Italy (2022/07/03 - 2022/07/07)
Conference (Other)
 ICC - International Conferences and Courses Limited, Hong Kong SAR China
2019/08/05 - 2021/07/09 Organizer of the Special Session NANOMATERIALS (SS4) of the 14th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2021, Malta (2021/07/05 - 2021/07/09)
Congress (Other)
 ICC - International Conferences and Courses Limited, Hong Kong SAR China
2018/08/05 - 2019/07/05 Organizer of the Special Session NANOMATERIALS (SS4) of the 13th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2019, Athens, Greece (2019/07/01 - 2019/07/01)
Congress (Other)
 ICC - International Conferences and Courses Limited, Hong Kong SAR China
2017/08/05 - 2018/07/05 Organizer of the Special Session NANOMATERIALS (SS4) of the 12th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2018, Amsterdam, The Netherlands (2018/07/01 - 2018/07/05)
Congress (Other)
 ICC - International Conferences and Courses Limited, Hong Kong SAR China
2016/08/01 - 2017/07/06 Organizer of the Special Session NANOMATERIALS (SS4) of the 11th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2017, Vienna, Austria (2017/07/03 - 2017/07/06)
Congress (Other)
 ICC - International Conferences and Courses Limited, Hong Kong SAR China

Event participation

Activity description
Type of event 		Event name
Institution / Organization
2024/09/27 - 2024/09/27 “The European Researchers' Night” (Noite Europeia dos Investigadores), edition NEI Coimbra 2024, as a researcher promoting the activity 45 - #CEMMPRE pelas Pessoas, Prosperidade e Planeta
Other
 “The European Researchers' Night” (Noite Europeia dos Investigadores)
2023/09/29 - 2023/09/29 "The European Researchers' Night" (Noite Europeia dos Investigadores), edition NEI Coimbra 2023, as a researcher, promoting the activity 59 -#Sustentabilidade e inclusão CEMMPRE!
Other
 The European Researchers' Night (Noite Europeia dos/das Investigadores/as)
2022/09/30 - 2022/09/30 "The European Researchers' Night" (Noite Europeia dos Investigadores), edition NEI Coimbra 2022, as a researcher, promoting the activity 58 -#CEMMPRE pelo futuro
Other
 The European Researchers' Night (Noite Europeia dos Investigadores)
2021/09/24 - 2021/09/24 "The European Researchers' Night" (Noite Europeia dos Investigadores), edition NEI Coimbra 2021 as a researcher, promoting the activity 23 -#Materials4Climate
Other
 The European Researchers' Night (Noite Europeia dos Investigadores)

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2024/09/20 Modelling and quantification of uncertainties associated with misalignments in the stamping process
President of the jury
 Pedro Miguel Ludovino Seixas (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2024/07/03 Analysis and Industrial Implementation of Robotic Laser Welding Cells for Bonding Polymers
President of the jury
 Bruno Alexandre Antunes Pereira (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/09/23 Analysis of torque and tool stress in bead on plate welding of non ferrous alloys/ANÁLISE DO BINÁRIO E DOS ESFORÇOS NA FERRAMENTA EM SOLDADURA BEAD ON PLATE DE LIGAS NÃO FERROSAS
President of the jury
 David José Pereira Antunes (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/07/27 Study of the Impact of Pressing on the Quality of Welded Parts/Estudo do Impacto da Prensagem na Qualidade de Peças Soldadas
President of the jury
 António Francisco Jorge (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/07/27 Analyses of process conditions in FSW welding of thick aluminum plates/Análise das condições do processo em soldadura FSW de chapas de alumínio com elevada espessura
President of the jury
 Eduardo Junqueira Gabaldo (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/07/27 Influence of thickness variability in the bulge test/Influência da variabilidade da espessura no ensaio hidráulico de expansão biaxial
President of the jury
 Hugo Miguel Ferreira de Melo (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/07/26 Influence of the blank thickness variability on the stamping process of a cylindrical cup/INFLUÊNCIA DA VARIABILIDADE DA ESPESSURA DA CHAPA NO PROCESSO DE ESTAMPAGEM DE UMA TAÇA CILÍNDRICA
President of the jury
 Isaac Edson Gonçalves Gabriel (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/07/25 Analysis and monitoring of a welding technology - Application to the joining of aluminium alloys for the naval industry/ANÁLISE E MONITORIZAÇÃO DE UMA TECNOLOGIA DE SOLDADURA – APLICAÇÃO À LIGAÇÃO DE LIGAS DE ALUMÍNIO PARA A INDÚSTRIA NAVAL
President of the jury
 Edgar Rocha Barbosa (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/07/25 Production of auxetic structures for aerospace applications/Produção de estruturas auxéticas para aplicações aeroespaciais
President of the jury
 Joao Pedro Martins Rocha (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/07/25 Sustainable Joining of Steels for the Automotive Industry/Ligação Sustentável de Aços para a Indústria Automóvel
President of the jury
 Luís Carlos Gomes Meirinho (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/07/19 Production of titanium/stainless steel hybrid components for use in the aeronautics sector/Produção de componentes híbridos titânio/aço inoxidável para a utilização no setor aeronáutico
President of the jury
 Alexandre Martins Guerreiro (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/07/19 Production of copper-stainless steel hybrid components for use in industrial cooling systems/Produção de componente híbridos cobre-aço inoxidável para utilização em sistemas de arrefecimento industriais
President of the jury
 André Oliveira Dimas Nobre Rodrigues (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/02/28 Torque and Temperature Analysis in FSW of Aluminium Alloys for Aeronautical Applications/Análise de temperatura e binário na ligação por FSW de ligas de alumínio para aplicações aeronáuticas
President of the jury
 Rafael José Chá Chá Gomes (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/02/28 Sensitivity Analysis of the Constitutive law Parameters on the Numerical Simulation of TAFSW Process/Análise de Sensibilidade dos Parâmetros das Leis Constitutivas dos Materiais na Simulação Numérica do Processo TAFSW
President of the jury
 Jorge Miguel Braga Bajouco (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021/08/10 Sensitivity analysis techniques applied to the stamping process of a square cup/Técnicas de análise de sensibilidade aplicadas ao processo de estampagem de uma taça quadrada
President of the jury
 Diogo Castanhas Rodrigues (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021/07/28 Robust analysis of tube hydroforming in a square cross-section die/Análise robusta da Hidroformação de tubos numa matriz com secção transversal quadrada
President of the jury
 Carlos Eduardo Nunes da Costa (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021/07/15 Constitutive parameter identification strategies for metallic sheets/Estratégias de identificação de parâmetros constitutivos de chapas metálicas
President of the jury
 Eduardo Filipe Soares Carvalheiro (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021/02/19 Sensitivity analysis of the biaxial test on a cruciform specimen/Análise de sensibilidade do ensaio biaxial em provete cruciforme
President of the jury
 Bernardo Monteiro dos Santos de Aguiar da Câmara (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021/01/22 Strategy for identifying the plastic behaviour of sheet metals/Estratégia de identificação do comportamento plástico de chapas metálicas
(Thesis) Main arguer
 Sergiu Budchin (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2012/07/27 Caracterização do comportamento plástico de chapas metálicas com recurso ao ensaio de expansão biaxial simétrica (Project of PhD thesis)
(Thesis) Arguer
 Luís Carlos Duarte dos Reis (Other)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2012/07/11 Caracterização do comportamento plástico de chapas metálicas com recurso ao ensaio de expansão biaxial simétrica
President of the jury
 Luís Carlos Duarte dos Reis (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2011/07/28 Caracterização do comportamento constitutivo de chapas metálicas a partir de um único ensaio experimental (Project of PhD thesis)
(Thesis) Arguer
 Pedro André Dias Prates (Other)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2010/02/05 Metodologia de Análise Inversa para Determinação Simultânea dos Parâmetros de Leis Constitutivas, com Recurso a um Provete Cruciforme
(Thesis) Main arguer
 Pedro André Dias Prates (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal

Committee member

Activity description
Role 		Institution / Organization
2018/01/01 - 2019/12/31 Member of the Fiscal Board of SPMicros (Sociedade Portuguesa de Microscopia), http://www.spmicros.com/organizacao/
Member

Conference scientific committee

Conference name Conference host
2023/08/05 - 2024/07/05 17th International Conference on Advanced Computational Engineering and Experimenting, ACEX2024 Barcelona, Spain
2022/08/05 - 2023/07/07 16th International Conference on Advanced Computational Engineering and Experimenting, ACEX 2023 Heraklion, Crete (Greece)
2021/08/05 - 2022/07/07 15th International (Hybrid) Conference on Advanced Computational Engineering and Experimenting, ACEX 2022 Italy, Florence
2019/08/05 - 2021/07/09 14th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2021 Malta
2018/08/05 - 2019/07/05 13th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2019 Greece, Athens

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2024/02/01 - Current Numerical and Computational Methods/Métodos Numéricos e Computacionais for "Licenciatura em Engenharia Mecânica": practical (P) classes Engenharia Mecânica (Licenciatura) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/02/01 - 2023/08/31 Forming and Cutting Technologies/Tecnologias de Conformação e Corte for "Licenciatura em Engenharia Mechanica": theoretical-practical (TP) classes Engenharia Mecânica (Licenciatura) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/02/01 - 2023/08/31 Numerical and Computational Methods/Métodos Numéricos e Computacionais for "Licenciatura em Engenharia Mecânica": theoretical-practical (TP) classes Engenharia Mecânica (Licenciatura) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2022/02/01 - 2022/08/31 Forming and Cutting Technologies/Tecnologias de Conformação e Corte for "Licenciatura em Engenharia Mecânica": theoretical-practical (TP) classes Engenharia Mecânica (Licenciatura) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2021/02/01 - 2021/08/31 Numerical and Computational Methods/Métodos Numéricos e Computacionais for "Licenciatura em Engenharia e Gestão Industrial" and "Mestrado Integrado em Engenharia Mecânica": practical (P) classes Ciências de Engenharia Mecânica (Licenciatura) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2020/02/01 - 2020/08/31 Numerical and Computational Methods/Métodos Numéricos e Computacionais for "Licenciatura em Engenharia e Gestão Industrial" and "Mestrado Integrado em Engenharia Mecânica": practical (P) classes Ciências de Engenharia Mecânica (Licenciatura) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2019/02/01 - 2019/08/29 Numerical and Computational Methods/Métodos Numéricos e Computacionais for "Licenciatura em Engenharia e Gestão Industrial" and "Mestrado Integrado em Engenharia Mecânica": theoretical-practical (TP) and practical (P) classes Ciências de Engenharia Mecânica (Licenciatura) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2011/09/01 - 2012/02/01 Mechanical technology/Tecnologia mecânica: responsible for curricular unit, theoretical (T) and theoretical-practical (TP) classes for "Licenciatura em Engenharia e Gestão Industrial" Engenharia e Gestão Industrial (Licenciatura) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2010/09/01 - 2011/02/01 Mechanical technology/Tecnologia mecânica: theoretical-practical (TP) classes for "Licenciatura em Engenharia e Gestão Industrial" Engenharia e Gestão Industrial (Licenciatura) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal