???global.info.a_carregar???
Identification

Personal identification

Full name
António Augusto Costa de Azevedo Azevedo

Citation names

  • Azevedo, António
  • A.C. Azevedo
  • A. C. Azevedo
  • AC Azevedo
  • Antonio C. Azevedo

Author identifiers

Ciência ID
291D-00B0-E99F
ORCID iD
0000-0003-4530-9880
Education
Degree Classification
2017
Concluded
 Engenharia Civil (Doutoramento)
Major in Especialidade: Construções
Universidade do Porto Faculdade de Engenharia, Portugal
"Interface influence on moisture transport in building components" (THESIS/DISSERTATION)
 Aprovado
2008/08/01 - 2010/03/05
Concluded
 Engenharia Civil (Master)
Major in Tecnologia da Construção
Universidade Católica de Pernambuco, Brazil
"Avaliação Comparativa da Influência do Revestimento Simples e Armado no Comportamento Compressivo de Prismas e Paredinhas de Blocos Cerâmicos de Vedação" (THESIS/DISSERTATION)
 Aprovado
2003/08 - 2008/06
Concluded
 Engenharia Civil (Graduado)
Universidade Católica de Pernambuco, Brazil
 Aprovado
Outputs

Publications

Book
  1. João M.P.Q. Delgado; Fernando A.N. Silva; António C. Azevedo; Ariosvaldo Ribeiro. Salt Damage in Ceramic Brick Masonry. 2020.
    10.1007/978-3-030-47114-9
  2. Delgado, J.M.P.Q.; Silva, F.A.N.; Azevedo, A.C.; Ribeiro, A.. Preface. 2020.
  3. Azevedo, António. Design of Reinforced Concrete Silo Groups. Switzerland. 2019.
    10.1007/978-3-030-13621-5
  4. Azevedo, António. Drying Kinetics in Building Materials and Components. 2019.
    10.1007/978-3-030-31860-4
  5. Delgado, J.M.P.Q.; Guimarães, A.S.; Azevedo, A.C.. Preface. 2019.
Book chapter
  1. Azevedo, António. "Knee Point Detection in Water Absorption Curves: Hygric Resistance in Multilayer Building Materials". 2021.
    10.1007/978-3-030-50998-9_2
  2. Azevedo, António. "Adhesion of Gypsum Plaster Coatings: Experimental Evaluation". 2021.
    10.1007/978-3-030-50998-9_3
  3. Delgado, J.M.P.Q.; Azevedo, A.C.; Guimarães, A.S.. "Introduction". 1-4. 2020.
    10.1007/978-3-030-30803-2_1
  4. João M.P.Q. Delgado; Fernando A.N. Silva; António C. Azevedo; Ariosvaldo Ribeiro. "State-of the-Art". 2020.
    10.1007/978-3-030-47114-9_2
  5. João M.P.Q. Delgado; Fernando A.N. Silva; António C. Azevedo; Ariosvaldo Ribeiro. "Effect of Soluble Mineral Salts". 2020.
    10.1007/978-3-030-47114-9_4
  6. João M.P.Q. Delgado; Fernando A.N. Silva; António C. Azevedo; Ariosvaldo Ribeiro. "Materials and Methods". 2020.
    10.1007/978-3-030-47114-9_3
  7. Delgado, J.M.P.Q.; Azevedo, A.C.; Guimarães, A.S.. "Conclusions". 61-62. 2020.
    10.1007/978-3-030-30803-2_5
  8. Delgado, J.M.P.Q.; Azevedo, A.C.; Guimarães, A.S.. "Interface Influence During the Wetting Process". 31-60. 2020.
    10.1007/978-3-030-30803-2_4
  9. Delgado, J.M.P.Q.; Azevedo, A.C.; Guimarães, A.S.. "Moisture Content Determination". 17-29. 2020.
    10.1007/978-3-030-30803-2_3
  10. Delgado, J.M.P.Q.; Silva, F.A.N.; Azevedo, A.C.; Ribeiro, A.. "Salt damage in ceramic brick masonry". 1-56. 2020.
  11. Delgado, J.M.P.Q.; Azevedo, A.C.; Guimarães, A.S.. "Hygrothermal Properties of the Tested Materials". 3-32. 2019.
    10.1007/978-3-030-31860-4_2
  12. Delgado, J.M.P.Q.; Guimarães, A.S.; Azevedo, A.C.; Oliveira, R.A.; Silva, F.A.N.; Sobrinho, C.W.A.P.. "Physical and Hygrothermal Material Properties". 7-20. 2019.
    10.1007/978-3-030-03270-8_2
  13. Delgado, J.M.P.Q.; Guimarães, A.S.; Azevedo, A.C.; Oliveira, R.A.; Silva, F.A.N.; Sobrinho, C.W.A.P.. "Structural Performance of Resistant Masonry Elements". 37-68. 2019.
    10.1007/978-3-030-03270-8_4
  14. Delgado, J.M.P.Q.; Guimarães, A.S.; Azevedo, A.C.; Oliveira, R.A.; Silva, F.A.N.; Sobrinho, C.W.A.P.. "Conclusions". 69-70. 2019.
    10.1007/978-3-030-03270-8_5
  15. Delgado, J.M.P.Q.; Guimarães, A.S.; Azevedo, A.C.; Oliveira, R.A.; Silva, F.A.N.; Sobrinho, C.W.A.P.. "Influence of Reinforced Mortar Coatings on the Compressive Strength of Masonry Prisms". 21-35. 2019.
    10.1007/978-3-030-03270-8_3
  16. Delgado, J.M.P.Q.; Azevedo, A.C.; Guimarães, A.S.. "Interface Influence During the Drying Process". 33-59. 2019.
    10.1007/978-3-030-31860-4_3
  17. Delgado, J.M.P.Q.; Azevedo, A.C.; Guimarães, A.S.. "Introduction". 1-2. 2019.
    10.1007/978-3-030-31860-4_1
  18. Azevedo, António. "Experimental Analyse of the Influence of Different Mortar Rendering Layers in Masonry Buildings". United States, 2018.
  19. Azevedo, A.C.; Delgado, J.M.P.Q.; Guimarães, A.S.. "Influence of reinforced mortar coatings on the compressive strength of masonry prisms". 55-81. 2018.
    10.1007/978-3-319-91062-8_2
Conference paper
  1. Azevedo, António. "INFLUENCE OF THE SUBSTRATE PREPARATION ON THE ADHESION OF MORTAR ON CERAMIC BRICKS". 2018.
  2. Azevedo, António. "AVALIAÇÃO DO ESTADO DE CONSERVAÇÃO DE ESTRUTURA DE CONCRETO - ESTUDO DE CASO". 2018.
  3. da Costa e Silva, A.J.; de Azevedo, A.A.C.; de Souza, M.T.G.. "Influência da preparação da base na aderência de revestimentos de argamassa sobre tijolos cerãmicos". 2018.
Journal article
  1. Azevedo, António. "Influence of the contact area in the adherence of mortar – Ceramic tiles interface". Construction and Building Materials (2020): http://dx.doi.org/10.1016/j.conbuildmat.2020.118274.
    10.1016/j.conbuildmat.2020.118274
  2. A.S. Guimarães; I.M. Ribeiro; A.C. Azevedo; João M.P.Q. Delgado. "Water Absorption Curves versus Gamma-Ray Attenuation Profiles: A Comparative Analysis of Hygric Permeance Results". Defect and Diffusion Forum (2020): https://doi.org/10.4028/www.scientific.net/DDF.400.32.
    10.4028/www.scientific.net/DDF.400.32
  3. Azevedo, António. "The Effect of Soluble Mineral Salts in Ceramic Brick Masonry". International Journal of Civil Engineering (2020):
    10.1007/s40999-020-00502-x
  4. Azevedo, António. "Moisture Transport across Perfect Contact Interface of Ceramic Blocks". Journal of Porous Media (2020): http://www.dl.begellhouse.com/pt/journals/49dcde6d4c0809db,forthcoming,29262.html.
    10.1615/JPorMedia.2020029262
  5. Delgado, J.M.P.Q.; Silva, F.A.N.; Azevedo, A.C.; Silva, D.F.; Campello, R.L.B.; Santos, R.L.. "Artificial neural networks to assess the useful life of reinforced concrete elements deteriorated by accelerated chloride tests". Journal of Building Engineering 31 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85084942469&partnerID=MN8TOARS.
    10.1016/j.jobe.2020.101445
  6. Azevedo, António. "Ultrasonic Assessment of Damage in Concrete under Compressive and Thermal Loading Using Longitudinal and Transverse Waves". Russian Journal of Nondestructive Testing (2019): http://dx.doi.org/10.1134/s1061830919110081.
    10.1134/s1061830919110081
  7. Azevedo, António. "Hygric Permeance - New Calculation Methodology". Diffusion Foundations (2019): http://dx.doi.org/10.4028/www.scientific.net/df.24.145.
    10.4028/www.scientific.net/df.24.145
  8. Azevedo, António. "Influence of Lime Solution on the Bonding Strength of a Mortar Coating Base". Diffusion Foundations (2019): http://dx.doi.org/10.4028/www.scientific.net/df.24.1.
    10.4028/www.scientific.net/df.24.1
  9. A.C. Azevedo; A.J. Costa e Silva; J.M.P.Q. Delgado; F.M. Vieira; M.T.G. Souza. "Influence of Lime Solution on the Bonding Strength of a Mortar Coating Base". Diffusion Foundations (2019): https://doi.org/10.4028/www.scientific.net/DF.24.1.
    10.4028/www.scientific.net/DF.24.1
  10. Azevedo, António. "Influence of hydraulic contact interface on drying process of masonry walls". (2019): http://dx.doi.org/10.1080/07373937.2019.1615939.
    10.1080/07373937.2019.1615939
  11. Azevedo, António. "on Moisture Transport in Building Walls - A Brief Review". Diffusion Foundations (2019): https://www.scientific.net/DF.22.19.
    10.4028/www.scientific.net/DF.22.19
  12. Silva, F.A.N.; Nogueira, C.L.; Silva, J.A.; Araújo, A.V.P.; Azevedo, A.C.; Delgado, J.M.P.Q.. "Ultrasonic Assessment of Damage in Concrete under Compressive and Thermal Loading Using Longitudinal and Transverse Waves". Russian Journal of Nondestructive Testing 55 11 (2019): 808-816. http://www.scopus.com/inward/record.url?eid=2-s2.0-85078899558&partnerID=MN8TOARS.
    10.1134/S1061830919110081
  13. Azevedo, António. "Hygric resistance in multilayer building materials – a prevision new methodology". MATEC Web of Conferences (2019): http://dx.doi.org/10.1051/matecconf/201928202017.
    10.1051/matecconf/201928202017
  14. Azevedo, A.; Delgado, J.Q.; Guimarães, A.; Silva, F.A.; Oliveira, R.. "Compression behaviour of clay bricks prisms, wallets and walls - Coating influence". Revista de la Construccion 18 1 (2019): 123-133. http://www.scopus.com/inward/record.url?eid=2-s2.0-85066326566&partnerID=MN8TOARS.
    10.7764/RDLC.18.1.123
  15. Azevedo, António. "Hygrothermal and Mechanical Properties of Ceramic Bricks and Mortars". Journal of Material Sciences & Engineering (2018): https://www.omicsonline.org/open-access/hygrothermal-and-mechanical-properties-of-ceramic-bricks-and-mortars-2169-0022-1000477-103837.html.
    10.4172/2169-0022.1000477
  16. Azevedo, António. "Preliminary Analysis of the Influence of Reinforced Mortar Coating on the Compressive Strength of Clay Bricks". The Open Civil Engineering Journal (2018): https://www.benthamopen.com/TOCIEJ/.
    10.2174/1874149501812010071
  17. Antônio Azevedo; Ricardo Sousa; Ana Sofia Guimarães; Vasco P. de Freitas. "Hydric Resistance in Ceramic Samples with Contact Interfaces". U.Porto Journal of Engineering (2018): https://doi.org/10.24840/2183-6493_003.003_0008.
    10.24840/2183-6493_003.003_0008
  18. Guimarães, A.S.; Delgado, J.M.P.Q.; Azevedo, A.C.; de Freitas, V.P.. "Interface influence on moisture transport in buildings". Construction and Building Materials 162 (2018): 480-488. http://www.scopus.com/inward/record.url?eid=2-s2.0-85038005211&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2017.12.040
  19. Azevedo, António. "Structural performance of unreinforced masonry elements made with concrete and horizontally perforated ceramic blocks – Laboratory tests". Construction and Building Materials (2018): https://www.sciencedirect.com/science/article/pii/S095006181831482X/pdfft?md5=7ba0cdd625ebeda3772ca69fa5f79a83&pid=1-s2.0-S095006181831482X-main.pdf.
    10.1016/j.conbuildmat.2018.06.092
  20. Azevedo, António. "Hydric Resistance in Ceramic Samples with Contact Interfaces". U.Porto Journal of Engineering (2017):
  21. Azevedo, António. "Moisture Measuring Device Based on Non-Destructive Method of Gamma Rays Attenuation". DEFECT AND DIFFUSION FORUM (2017): https://www.scientific.net/DDF.380.55.
    10.4028/www.scientific.net/DDF.380.55
  22. Azevedo, António. "Edificações em alvenaria resistente na região metropolitana do Recife". Ambiente Construído (2017):
    http://dx.doi.org/10.1590/s1678-86212017000200152
  23. Azevedo, António. "Avaliação comparativa da influência do revestimento simples e armado no comportamento compressivo de prismas e paredinhas de blocos cerâmicos de vedação". Symposium (Recife) (2010):