???global.info.a_carregar???
Identification

Personal identification

Full name
Joana Mesquita Guimarães
Date of birth
1979/10/27
Gender
Female

Citation names

  • Mesquita-Guimarães, Joana

Author identifiers

Ciência ID
3410-48BF-42A6
ORCID iD
0000-0002-6342-7824

Email addresses

  • joanaguimaraes@ua.pt (Professional)

Telephones

Mobile phone
  • 916956699 (Personal)

Addresses

  • University of Aveiro. Campus de Santiago, 3810-193, Aveiro, Aveiro, Portugal (Professional)
  • Rua da Nossa senhora dos anjos, 22, 2ºEsq. , 3800-113, Aveiro , Aveiro, Portugal (Personal)

Websites

Knowledge fields

  • Engineering and Technology - Materials Engineering - Ceramics
  • Engineering and Technology - Mechanical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese (Mother tongue)
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Spanish; Castilian Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
German Intermediate (B1) Intermediate (B1) Intermediate (B1) Intermediate (B1)
Education
Degree Classification
2012
Concluded
 PhD Program-Chemistry as a multidisciplinary science (recognized by University of Aveiro as Doctorated in Materials Science and Engineering) (Doutoramento)
Universidad Autónoma de Madrid, Spain
"The behaviour of Mullite/ZrO2 multilayer coatings designed as EBC under water vapour and high-temperature conditions." (THESIS/DISSERTATION)
 Sobresaliente Cum Laude
2009
Concluded
 Research in Inorganic Chemistry (Curso de doutoramento (conclusão de unidades curriculares))
Universidad Autónoma de Madrid, Spain
"Mullite/ZrO2 granules as input material in thermal spray techniques and study of their crystallization" (THESIS/DISSERTATION)
 18
2007
Concluded
 Ceramic and Glass Engineering (Licenciatura)
Universidade de Aveiro, Portugal
"Evolution of the particle size of calcite in the grinding of hard raw materials for red clays" (THESIS/DISSERTATION)
 13
Affiliation

Science

Category
Host institution 		Employer
2019/04/01 - Current Researcher (Research) Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2016/11/01 - 2019/11/01 Postdoc (Research) Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2014/09/01 - 2016/08/01 Postdoc (Research) Universidade Federal de Santa Catarina Departamento de Engenharia Mecânica, Brazil
Universidade Federal de Santa Catarina Departamento de Engenharia Mecânica, Brazil
2013/01/01 - 2014/08/01 Postdoc (Research) Universidade de Aveiro CICECO, Portugal
Universidade de Aveiro CICECO, Portugal

Others

Category
Host institution 		Employer
2008/02/01 - 2012/07/01 Ph.D. Thesis on Thermally Sprayed Environmental Barrier Coatings (EBCs) on Light Weight Silicon-Based Ceramics for the Next Generation of High-Performance Gas Turbine Engines, with the Nacional Resear Instituto de Cerámica y Vidrio, Spain
2007/12/01 - 2008/01/01 Teaching on Escuela Superior del Vidrio de la Real Fábrica de Cristales de La Granja the Materials signature, focused on Materials and technologies of the glass sector, of the 3rd year of the graduate Escuela Superior del Vidrio, Spain
2007/06/01 - 2007/12/01 Its main function during the internship in Saint-Gobain was the development of new glass blocks, with fire resistance, new painting techniques and ageing under weather conditions. Saint-Gobain de La Granja, SGD La Granja, S.L, Spain, Spain
Projects

Grant

Designation Funders
2013 - 2017 DEVELOPMENT OF HIGH PERFORMANCE BIO-INSPIRED FUNCTIONALLY GRADED MATERIALS FOR ORAL REHABILITATION
407035/2013-3
Post-doc Fellow
Universidade Federal de Santa Catarina Departamento de Engenharia Mecânica, Brazil
 Conselho Nacional de Desenvolvimento Científico e Tecnológico
Concluded
2012 - 2016 Multi-material laser sintering for the production of Functional Graded Structures
EXCL/EMS-TEC/0460/2012
Post-doc Fellow
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
 Faculdade de Ciências e Tecnologia
Concluded
2012 - 2015 NobleDec - Nobly Decorated Crystal
2012/023274
Post-doc Fellow
Universidade de Aveiro CICECO, Portugal
 Agência Nacional de Inovação SA
Concluded

Contract

Designation Funders
2022/05/01 - Current UIDP/00481/2020
UIDP/00481/202
Researcher
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2021/01/01 - 2025/12/31 Laboratório Associado de Sistemas Inteligentes
10.54499/LA/P/0104/2020
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Universidade Nova de Lisboa Centro de Tecnologias e Sistemas, Portugal

Instituto Politécnico do Porto Centro de Investigação em Sistemas Computacionais Embebidos e de Tempo-Real, Portugal

Universidade do Minho, Portugal

Universidade do Porto Faculdade de Ciências, Portugal

Universidade do Porto Centro de Matemática, Portugal

Instituto Politécnico do Cávado e do Ave, Portugal

Universidade do Porto Laboratório de Inteligência Artificial e Ciência de Computadores, Portugal

Universidade de Aveiro Instituto de Engenharia Eletrónica e Informática de Aveiro, Portugal

Universidade do Minho Instituto de Polímeros e Compósitos, Portugal

Universidade do Minho Centro ALGORITMI, Portugal

Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal

Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Universidade de Coimbra, Portugal

Universidade de Coimbra Centro de Informatica e Sistemas, Portugal

Universidade de Aveiro, Portugal

Instituto Politécnico do Porto Grupo de Investigação em Engenharia e Computação Inteligente para a Inovação e o Desenvolvimento, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Universidade NOVA de Lisboa, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2021/01/01 - 2025/12/31 Intelligent Systems Associate Laboratory
LA/P/0104/2020
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Universidade Nova de Lisboa Centro de Tecnologias e Sistemas, Portugal

Instituto Politécnico do Porto Centro de Investigação em Sistemas Computacionais Embebidos e de Tempo-Real, Portugal

Universidade do Minho, Portugal

Universidade do Porto Faculdade de Ciências, Portugal

Universidade do Porto Centro de Matemática, Portugal

Instituto Politécnico do Cávado e do Ave, Portugal

Universidade do Porto Laboratório de Inteligência Artificial e Ciência de Computadores, Portugal

Universidade de Aveiro Instituto de Engenharia Eletrónica e Informática de Aveiro, Portugal

Universidade do Minho Instituto de Polímeros e Compósitos, Portugal

Universidade do Minho Centro ALGORITMI, Portugal

Universidade Nova de Lisboa Unidade de Investigação e Desenvolvimento em Engenharia Mecânica e Industrial, Portugal

Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Universidade de Coimbra, Portugal

Universidade de Coimbra Centro de Informatica e Sistemas, Portugal

Universidade de Aveiro, Portugal

Instituto Politécnico do Porto Grupo de Investigação em Engenharia e Computação Inteligente para a Inovação e o Desenvolvimento, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Universidade NOVA de Lisboa, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2022/02/01 - 2022/04/30 Adaptmark - Intelligent, autonomous and flexible robotic component marking system
POCI-01-0247-FEDER-046982
Researcher
Universidade de Aveiro, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2019/04 - 2021/09 TAMAZ3D - Development of a decision support tool for additive manufacturing of alumina-zirconia 3d structures
POCI-01-0145-FEDER-030493
POCI-01-0145-FEDER-030493
Researcher
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Universidade de Aveiro CICECO, Portugal

Universidade de Aveiro Instituto de Engenharia Eletrónica e Informática de Aveiro, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2018/08/01 - 2021/07/31 Projeto e Manufatura de Implantes Multifuncionais
PTDC/EME-EME/30498/2017
Universidade do Minho, Portugal

Universidade de Lisboa Faculdade de Medicina Dentária, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2019/01/01 - 2019/12/31 Unidade de Investigação em Microssistemas Eletromecânicos
UID/EEA/04436/2019
Universidade do Minho, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2016/06 - 2019/03/31 HAMaBICo _ Hybrid Additive Manufacturing for Bio Inspired Components
NORTE-01-0145-FEDER-000018
NORTE-01-0145-FEDER-000018
Post-doc Fellow
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
 Ministério da Ciência Tecnologia e Ensino Superior
Concluded
2010 - 2012 Manufacture of spatially complex ceramic structures using pulsed electrical current
MAT2009-09600
PhD Student Fellow
Instituto de Cerámica y Vidrio, Spain
 Gobierno de España Ministerio de Economía y Empresa
Concluded
2008 - 2012 Thermally Sprayed Environmental Barrier Coatings (EBCs) on Light Weight Silicon-Based Ceramics for the Next Generation of High-Performance Gas Turbine Engines
project 2007CA003
PhD Student Fellow
Instituto de Cerámica y Vidrio, Spain
Concluded
2007 - 2009 Microstructural Modification of Si-Based Ceramic Materials for High-Temperature Applications
CYCIT MAT2006-7118
PhD Student Fellow
Instituto de Cerámica y Vidrio, Spain
 CICyT: Consejo Interinstitucional de Ciencia y Tecnologia
Concluded

Other

Designation Funders
2024 - 2026 Laser Welding of Morphologically Dissimilar Thermoplastic Structures
2023.14833.PEX
Researcher
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
Ongoing
2024/01/01 - 2025/12/31 ILLIANCE energy efficiency
10.54499/LA/P/0104/2020
Researcher
Ongoing
2024/01/01 - 2025/12/31 OLI PUSH - ILLIANCE energy efficiency
10.54499/LA/P/0104/2020
Ongoing
2020/07/17 - 2021/03/14 FGM ZDI's - Production of a hybrid dental implant prototype zirconia and PEEK with a functional gradient for improve biomechanical performance by preventing peri-implantitis
MEDISIS-UA
Principal investigator
Universidade de Aveiro, Portugal
 Comissão de Coordenação e Desenvolvimento Regional do Centro
Concluded
2018 - 2021 Design and Fabrication of MultiFunctional Implants
PTDC/EME-EME/30498/2017
Researcher
Universidade do Minho, Portugal
Concluded
2018 - 2021 Laser-assisted processing of advanced multifuntional zirconia ceramics for improved mechanical, adhesive, biological and aesthetical properties of dental implants and restorations
PTDC/EME-EME/31035/2017
Researcher
Universidade do Minho, Portugal
Concluded
2018 - 2021 Development of multifunctional surfaces for zirconia dental implants
421229/2018-7
Researcher
Universidade Federal de Santa Catarina, Brazil
Ongoing
Outputs

Publications

Book
  1. Mesquita-Guimarães, Joana. Ceramic Dental Implants: Concept; Fabrication; Mechanical and Biological Properties. Switzerland: MDPI - Multidisciplinary Digital Publishing Institute. 2021.
    Under revision • Editor
  2. Mesquita-Guimarães, J.; Henriques., B.H.; Silva., F.S.. Bioactive glass coatings. 2018.
  3. Mesquita-Guimarães, J.; Henriques, B.; Silva, F.S.; Souza, J.C.M.; Novaes de Oliveira, A.P.; Hotza, D.; do Nascimento, R.M.; Fredel, M.C.; Mesquita-Guimarães, Joana. Nanostructured biocompatible ceramics and glass-ceramics. Elsevier. 2018.
Book chapter
  1. Mesquita-Guimarães, J.; Henriques, B.; Silva, F.S.. "Bioactive glass coatings". In Bioactive Glasses: Materials, Properties and Applications, 103-118. Elsevier, 2018.
    Published • 10.1016/b978-0-08-100936-9.00007-1
  2. Mesquita-Guimarães, Joana. "Functionally Graded Materials in Dentistry". In Advances in Materials Science Research.. Nova Science Publishers, 2015.
    Published
Conference abstract
  1. Mesquita-Guimarães, Joana. "Microneedles fabrication via DLP for gingiva healing application: Dimensional control". Paper presented in TEchMA 2024– 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 2024.
    Published
  2. Mesquita-Guimarães, Joana. "The effect of S53P4 Bioactive glass coatings crystallinity and laser surface texturing on zirconia dental implants mineralisation and MC3T3-E1 cell adhesion". Paper presented in TEchMA 2024– 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 2024.
    Published
  3. Mesquita-Guimarães, Joana. "Double-depth texturization and bioactive coatings via laser technology for zirconia dental implants". Paper presented in TEchMA2023 – 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions: book of abstracts, Aveiro, 2023.
  4. Mesquita-Guimarães, Joana. "Laser texturing and numerical simulation of the heat transfer fluids for Cr2AlC MAX phase". Paper presented in TEchMA 2022– 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, 2022.
    Published • 10.48528/2smr-sn15
  5. Joaquim Pinho da Cruz; Mesquita-Guimarães, Joana. "Challenges and perspectives in additive manufacturing of ceramic materials: an overview of the mechanical properties in the alumina-zirconia system". Paper presented in TEchMA2020 3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions, Centre for Mechanical Technology and Automation (TEMA),, 2020.
    Published
  6. Mesquita-Guimarães, Joana. "TAMAZ3D - A New Tool for Technical Ceramics 3D-Printing: Structural properties of zirconia-alumina-based technical ceramics produced by additive manufacturing". Paper presented in 2nd International Conference of TEMA: Mobilizing Projects, 2019.
    Published
Conference paper
  1. Gustavo Carmo; Joana Mesquita-Guimarães; Joana Baltazar; Susana Olhero; Joaquim Pinho-da-Cruz. "Microstructural Modelling of the Thermoelastic Properties of Dense ZTA Ceramics". Paper presented in Materiais 2022, 2022.
    Published • 10.3390/materproc2022008004
  2. Susana Olhero; Carmo, Gustavo; Joaquim Pinho da Cruz; Mesquita-Guimarães, Joana. "Structural Performance of Dense Alumina-Zirconia Ceramics: An Overview of Conventional versus Additive Manufacturing". Paper presented in Materiais 2022, 2022.
    Published • 10.3390/materproc2022008005
  3. Guimarães, Joana. "Hybrid scaffolds composed of ß-TCP, PDLLA, and collagen for alveolar bone augmentation". 2016.
    10.1111/clr.11_12958
  4. Fabris, Douglas; Bruno Henriques; Márcio C. Fredel; Mesquita-Guimarães, Joana. "FEM and analytical analysis of the bending stress distribution in graded zirconia-based dental ceramics". Paper presented in ISFGM2016 - 14th International Symposium on Functionally Graded Materials, 2016, Bayreuth, Germany, 2016.
  5. Garcia, E.; Mesquita-Guimarães, Joana; Miranzo, P.; Osendi, M. I.; Cojocaru, C. V.; Moreau, C.; Lima, R. S.. "Performance of Multilayered Mullite-Based EBCs in Simulated Working Conditions". Paper presented in International Thermal Spray Conference & Exposition (ITSC 2011), 2011.
    Published • 10.31399/asm.cp.itsc2011p0171
  6. Wang, Y.; Lima, R.S.; Moreau, C.; Garcia, E.; Guimaraes, J.; Miranzo, P.; Osendi, M.I.; Mesquita-Guimarães, Joana. "Mullite coatings produced by APS and SPS: Effect of powder morphology and spray processing on the microstructure, crystallinity and mechanical properties". 2009.
    10.1361/cp2009itsc0097
  7. Garcia, E.; Guimarães, J.; Miranzo, P.; Osendi, M.I.; Wang, Y.; Lima, R.S.; Moreau, C.. "Mullite and mullite/ZrO2-7wt%Y2O3 powders for thermal spraying of environmental barrier coatings". 2009.
    10.1361/cp2009itsc0115
Conference poster
  1. Mesquita-Guimarães, Joana; CE16-B5C4-975F; 2111-64B6-5CDE; 1510-5960-1561; Coimbra, Manuel A.; Mariana Braga de Oliveira. "Evaluation of the impact of Surface Texturing and Dual Coating on Zirconia Dental Implants". Paper presented in I Workshop on Zirconia Dental Implants - Concept, Manufacturing, Mechanical and Biological Properties, 2024.
  2. Mesquita-Guimarães, Joana. "Investigation of acemanann as potential angiogenic coating". Paper presented in Research Summit 2024, 2024.
  3. B. S. Baptista; Neves, Beatriz G.; Ferreira, Sónia S.; L. M. Pereira; N.M. Ferreira; Coimbra, Manuel A.; Oliveira, Mariana B.; Mesquita-Guimarães, Joana. Corresponding author: B. S. Baptista. "Investigation of potential angiogenic coatings for dental implants.". Paper presented in Encontro Ciência 2024 - Science and Technology Summit, 2024.
  4. Sónia Gonçalves Patrício; Martinho Oliveira; Mesquita-Guimarães, Joana. "Mechanical analysis and dimensional control of 3D-printing microneedles for gingiva healing application". Paper presented in Encontro de Ciência2024, 2024.
  5. Mesquita-Guimarães, Joana; L. M. Pereira; Joaquim Alexandre Mendes de Pinho da Cruz; AE1E-3834-D074; Completo, António. "Hybrid Zirconia Dental Implant: Proof of concept". Paper presented in BioCAM - Additive Manufacturing Applied to Bioceramics, 2023.
  6. L. M. Pereira; Q. Nawaz; R. Detsch; A.R. Boccaccini; N.M. Ferreira; Mesquita-Guimarães, Joana. "Bioactive coatings analysis on double-depth texturization via laser technology for zirconia dental implants". Paper presented in CIÊNCIA 2023, Portuguese Science Summit; Science and Ocean Beyond the Horizon, 2023.
  7. Mesquita-Guimarães, Joana. "Yttria/ceria stabilized zirconia composites: evaluation of microstructural, mechanical and color properties for biomedical applications". Paper presented in Junior Euromat, 2022.
  8. Carmo, Gustavo; Mesquita-Guimarães, Joana. "Characterisation of the thermoelastic properties of 3D printed ZTA technical ceramics by Asymptotic Expansion Homogenisation". Paper presented in Junior Euromat, 2022.
  9. Mesquita-Guimarães, Joana; Silva, T.H.; Fredel, M.C.; Mesquita-Guimarães, J.. "Oyster shells’ processing for industrial application". Paper presented in Wastes: Solutions, Treatments and Opportunities III, 2019.
    10.1201/9780429289798-93
  10. Mesquita-Guimarães, Joana. "Zirconia-Alumina based ceramics produced by robocasting: aiming optimal mechanical properties". Paper presented in SHAPING7, 7th Shaping Conference, 2019.
  11. Mesquita-Guimarães, Joana. "Development of artificial stone base of oyster shells for application in workbenches". Paper presented in 7th International Congress on Ceramics (ICC 7), 2018.
  12. Mesquita-Guimarães, Joana; Guimarães, Joana. "Impact of Coloring/Fluorescence-Liquids and Aging on Fracture Resistance of Zirconia". Paper presented in Academy of Dental Materials Annual Meeting, 2017.
    10.1016/j.dental.2017.08.052
  13. Mesquita-Guimarães, Joana. "Influence of the thermal treatment and particle size of Ce-TZP and Y-TZP mixtures, for dental application". Paper presented in European Congress and Exhibition on Advanced Materials and Processes, EUROMAT, 2017.
  14. Mesquita-Guimarães, Joana. "Mechanical and microstructural properties of PEEK embedding bioactive glasses". Paper presented in Sociedade Brasileira de Pesquisa em Materiais (SPBMat), 2017.
  15. Mesquita-Guimarães, Joana. "Influence of surface conditioning using laser ablation on bonding strength between PEEK and dental resin". Paper presented in Sociedade Brasileira de Pesquisa em Materiais (SPBMat), 2017.
  16. Mesquita-Guimarães, Joana. "MG-63 Osteoblast-like cell adhesion on Zirconia Scaffolds coated with Bioactive Glasses 58S". Paper presented in 5th IBTN Day, Institute of Biomaterials, Tribocorrosion and Nanomedicine, 2017.
  17. Mesquita-Guimarães, Joana. "Mechanical properties of zirconia with an outer layer of zirconia-hydroxyapatite or zirconia-beta-tricalcium phosphate composites for biomedical applications". Paper presented in 5th IBTN Day, Institute of Biomaterials, Tribocorrosion and Nanomedicine, 2017.
  18. Faria, Diana; Mesquita-Guimarães, Joana. "Mechanical properties of layered zirconia to zirconia-hydroxyapatite or zirconia-ß-TCP composites for biomedical applications". Paper presented in MATERIAIS 2017, XVIII Congresso da Sociedade Portuguesa de Materiais and VIII International Symposium on Materials, 2017.
    10.2351/1.5065756
  19. Mesquita-Guimarães, Joana. "Processing of oyster shells for industrial application". Paper presented in 23º Congresso Brasileiro de Engenharia e Ciência dos Materiais, 2016.
  20. Mesquita-Guimarães, Joana. "Processing and characterization of new material obtained from dental zirconia residue of CAD/CAM blanks". Paper presented in XV Sociedade Brasileira de Pesquisa em Materiais (SBPMat), XV Brazilian Materials Research Society (B-MRS) meeting, 2016.
  21. Mesquita-Guimarães, Joana. "Production of zirconia porous structures by dip coating method". Paper presented in XV Sociedade Brasileira de Pesquisa em Materiais (SBPMat), XV Brazilian Materials Research Society (B-MRS) meeting, 2016.
  22. Mesquita-Guimarães, Joana. "Analysis of residual thermal stress in layered zirconia/porcelain discs for dental applications". Paper presented in XV Sociedade Brasileira de Pesquisa em Materiais (SBPMat), XV Brazilian Materials Research Society (B-MRS) meeting, 2016.
  23. Mesquita-Guimarães, Joana. "Mechanical characterization of trilayered all-ceramic dental restorations". Paper presented in New frontiers on biomaterials for bone regeneration, XIV Encontro da SBPMat Rio de Janeiro, 2015.
  24. Mesquita-Guimarães, Joana. "Evaluation of biaxial stress moment for bilayered and graduated discs using finite element method". Paper presented in New frontiers on biomaterials for bone regeneration, XIV Encontro da SBPMat Rio de Janeiro, 2015.
  25. Mesquita-Guimarães, Joana. "Hydrothermal degradation of 3Y-TZP and 12Ce-TZP laser sintered for dental applications". Paper presented in 14th International Conference of European Ceramic Society (ECERS), 2015.
  26. Mesquita-Guimarães, Joana. "Stress analysis on all-ceramic specimens of different geometries during thermal cycling tests". Paper presented in COMSOL Conference Curitiba, 2015.
Journal article
  1. L.M. Pereira; R. Santos; A.B. Pereira; N.M. Ferreira; J. Mesquita-Guimarães. "Double-size texturisation and biphasic calcium phosphate coatings obtained via laser technologies for bioactive zirconia dental implant surfaces". Open Ceramics 18 (2024): 100583.
    Open access • Published • 10.1016/j.oceram.2024.100583
  2. Gustavo P. Carmo; Joana Mesquita-Guimarães; Joana Baltazar; Susana M. Olhero; Pedro Antunes; Paula M.C. Torres; Sónia Gouveia; et al. "Multiscale modelling of the thermoelastic properties of alumina-zirconia ceramics for 3D printing". Ceramics International (2023): https://doi.org/10.1016/j.ceramint.2023.05.052.
    In press • 10.1016/j.ceramint.2023.05.052
  3. Mesquita-Guimarães, Joana; Joaquim Pinho da Cruz; Nuno Ferreira; Jesus Gonzalez Julian. "Laser surface texturing and numerical simulation of heat flux on Cr2AlC MAX phase heat exchangers". Journal of the European Ceramic Society. (2023):
    Under revision
  4. Olhero, S.M.; Torres, P.M.C.; Mesquita-Guimarães, J.; Baltazar, J.; Pinho-da-Cruz, J.; Gouveia, S.. "Conventional versus additive manufacturing in the structural performance of dense alumina-zirconia ceramics: 20 years of research, challenges and future perspectives". Journal of Manufacturing Processes 77 (2022): 838-879. http://dx.doi.org/10.1016/j.jmapro.2022.02.041.
    10.1016/j.jmapro.2022.02.041
  5. Mesquita-Guimarães, Joana. "Impact of immersion in coloring/fluorescent liquids and aging on the flexural strength of a dental zirconia". Odontology - Springer (2021):
    Under revision
  6. Gouveia, P.F.; Mesquita-Guimarães, J.; Galárraga-Vinueza, M.E.; Souza, J.C.M.; Silva, F.S.; Fredel, M.C.; Boccaccini, A.R.; Detsch, R.; Henriques, B.. "In-vitro mechanical and biological evaluation of novel zirconia reinforced bioglass scaffolds for bone repair". Journal of the Mechanical Behavior of Biomedical Materials 114 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85098496573&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2020.104164
  7. Gouveia, P.F.; Mesquita-Guimarães, J.; Galarraga-Vinueza, M.E.; Souza, J.C.M.; Moreira, A.C.; Silva, F.S.; Fredel, M.C.; Henriques, B.. "On the production of novel zirconia-reinforced bioactive glass porous structures for bone repair". Journal of Materials Science 56 20 (2021): 11682-11697. http://www.scopus.com/inward/record.url?eid=2-s2.0-85104131866&partnerID=MN8TOARS.
    10.1007/s10853-021-06005-x
  8. Henriques, Bruno; Hammes, Nathalia; Souza, Júlio C.M.; Özcan, Mutlu; Mesquita-Guimarães, Joana; Silva, Filipe S.; Fredel, Márcio C.; Volpato, Claudia M.; Carvalho, Óscar. "Influence of ns-Nd:YAG laser surface treatment on the tensile bond strength of zirconia to resin-matrix cements". Ceramics International 46 17 (2020): 27822-27831. http://dx.doi.org/10.1016/j.ceramint.2020.07.281.
    10.1016/j.ceramint.2020.07.281
  9. Askari, E.; Cengiz, I.F.; Alves, J.L.; Henriques, B.; Flores, P.; Fredel, M.C.; Reis, R.L.; et al. "Micro-CT based finite element modelling and experimental characterization of the compressive mechanical properties of 3-D zirconia scaffolds for bone tissue engineering". Journal of the Mechanical Behavior of Biomedical Materials 102 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85074956349&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2019.103516
  10. Mesquita-Guimarães, J.; Detsch, R.; Souza, A.C.; Henriques, B.; Silva, F.S.; Boccaccini, A.R.; Carvalho, O.. "Cell adhesion evaluation of laser-sintered HAp and 45S5 bioactive glass coatings on micro-textured zirconia surfaces using MC3T3-E1 osteoblast-like cells". Materials Science and Engineering C 109 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85077739580&partnerID=MN8TOARS.
    10.1016/j.msec.2019.110492
  11. Roedel, Stephanie; Mesquita-Guimarães, Joana; Souza, Júlio C.M.; Silva, Filipe S.; Fredel, Márcio C.; Henriques, Bruno. "Production and characterization of zirconia structures with a porous surface". Materials Science and Engineering: C 101 (2019): 264-273. http://dx.doi.org/10.1016/j.msec.2019.03.087.
    10.1016/j.msec.2019.03.087
  12. Faria, D.; Pires, J.M.; Boccaccini, A.R.; Carvalho, O.; Silva, F.S.; Mesquita-Guimarães, J.. "Development of novel zirconia implant's materials gradated design with improved bioactive surface". Journal of the Mechanical Behavior of Biomedical Materials 94 (2019): 110-125. http://dx.doi.org/10.1016/j.jmbbm.2019.02.022.
    10.1016/j.jmbbm.2019.02.022
  13. Henriques, Bruno; Fabris, Douglas; Tuyama, Eduardo; Mesquita-Guimarães, Joana; Silva, Filipe S.; Souza, Júlio C. M.; Fredel, Márcio. "Shear bond strength of PEEK and PEEK-30GF cemented to zirconia or titanium substrates". Journal of Adhesion Science and Technology 33 10 (2019): 1090-1101. http://dx.doi.org/10.1080/01694243.2019.1565289.
    10.1080/01694243.2019.1565289
  14. Thamyres H. Silva; J. Mesquita-Guimaraes; Bruno Henriques; Filipe S. Silva; Márcio C. Fredel. "The Potential Use of Oyster Shell Waste in New Value-Added By-Product". Resources (2019): http://www.mdpi.com/2079-9276/8/1/13.
    10.3390/resources8010013
  15. Madeira, S.; Mesquita-Guimarães, J.; Ribeiro, P.; Fredel, M.; Souza, J.C.M.; Soares, D.; Silva, F.S.; Henriques, B.. "Y-TZP/porcelain graded dental restorations design for improved damping behavior – A study on damping capacity and dynamic Young's modulus". Journal of the Mechanical Behavior of Biomedical Materials 96 (2019): 219-226. http://www.scopus.com/inward/record.url?eid=2-s2.0-85064957476&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2019.04.033
  16. Fabris, D.; Mesquita-Guimarães, J.; Pinto, P.; Souza, J.C.M.; Fredel, M.C.; Silva, F.S.; Henriques, B.. "Mechanical properties of zirconia periodic open cellular structures". Ceramics International 45 13 (2019): 15799-15806. http://www.scopus.com/inward/record.url?eid=2-s2.0-85065532886&partnerID=MN8TOARS.
    10.1016/j.ceramint.2019.05.010
  17. Mesquita-Guimarães, J.; Ramos, L.; Detsch, R.; Henriques, B.; Fredel, M.C.; Silva, F.S.; Boccaccini, A.R.. "Evaluation of in vitro properties of 3D micro-macro porous zirconia scaffolds coated with 58S bioactive glass using MG-63 osteoblast-like cells". Journal of the European Ceramic Society (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85061798383&partnerID=MN8TOARS.
    10.1016/j.jeurceramsoc.2019.01.029
  18. Dantas, T. A.; Roedel, S.; Mesquita-Guimarães, J.; Pinto, P.; Souza, J.C.M.; Fredel, M.C.; Silva, F.S.; Henriques, B.. "Sliding behavior of zirconia porous implant surfaces against bone". Journal of Biomedical Materials Research Part B: Applied Biomaterials 107 4 (2018): 1113-1121. http://dx.doi.org/10.1002/jbm.b.34204.
    10.1002/jbm.b.34204
  19. Guimarães, Joana. "Mesoporous bioactive glass embedding propolis and cranberry antibiofilm compounds". Journal of Biomedical Materials Research Part A (2018):
    10.1002/jbm.a.36352
  20. Buciumeanu, M.; Faria, D.; Mesquita-Guimarães, J.; Silva, F.S.. "Tribological characterization of bioactive zirconia composite layers on zirconia structures". Ceramics International (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85049897859&partnerID=MN8TOARS.
    10.1016/j.ceramint.2018.07.094
  21. Henriques, B.; Fabris, D.; Mesquita-Guimarães, J.; Sousa, A.C.; Hammes, N.; Souza, J.C.M.; Silva, F.S.; Fredel, M.C.. "Influence of laser structuring of PEEK, PEEK-GF30 and PEEK-CF30 surfaces on the shear bond strength to a resin cement". Journal of the Mechanical Behavior of Biomedical Materials 84 (2018): 225-234. http://www.scopus.com/inward/record.url?eid=2-s2.0-85047435233&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2018.05.008
  22. Roedel, S.; Souza, J.C.M.; Silva, F.S.; Mesquita-Guimarães, J.; Fredel, M.C.; Henriques, B.. "Optimized route for the production of zirconia structures with controlled surface porosity for biomedical applications". Ceramics International 44 11 (2018): 12496-12503. http://www.scopus.com/inward/record.url?eid=2-s2.0-85045701434&partnerID=MN8TOARS.
    10.1016/j.ceramint.2018.04.042
  23. Dantas, T.A.; Roedel, S.; Flores, P.; Mesquita-Guimarães, J.; Souza, J.C.M.; Fredel, M.C.; Silva, F.S.; Henriques, B.. "Wear behaviour of tetragonal zirconia polycrystal with a porous surface". International Journal of Refractory Metals and Hard Materials 75 (2018): 85-93. http://www.scopus.com/inward/record.url?eid=2-s2.0-85045379547&partnerID=MN8TOARS.
    10.1016/j.ijrmhm.2018.04.007
  24. Henriques, B.; Fabris, D.; Souza, J.C.M.; Silva, F.S.; Carvalho, Ó.; Fredel, M.C.; Mesquita-Guimarães, J.. "Bond strength enhancement of zirconia-porcelain interfaces via Nd:YAG laser surface structuring". Journal of the Mechanical Behavior of Biomedical Materials 81 (2018): 161-167. http://www.scopus.com/inward/record.url?eid=2-s2.0-85042861400&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2018.02.031
  25. Galarraga-Vinueza, M.E.; Passoni, B.; Benfatti, C.A.M.; Mesquita-Guimarães, J.; Henriques, B.; Magini, R.S.; Fredel, M.C.; et al. "Inhibition of multi-species oral biofilm by bromide doped bioactive glass". Journal of Biomedical Materials Research - Part A 105 7 (2017): 1994-2003. http://www.scopus.com/inward/record.url?eid=2-s2.0-85017478205&partnerID=MN8TOARS.
    10.1002/jbm.a.36056
  26. Gouveia, P.F.; Schabbach, L.M.; Souza, J.C.M.; Henriques, B.; Labrincha, J.A.; Silva, F.S.; Fredel, M.C.; Mesquita-Guimarães, J.. "New perspectives for recycling dental zirconia waste resulting from CAD/CAM manufacturing process". Journal of Cleaner Production 152 (2017): 454-463. http://www.scopus.com/inward/record.url?eid=2-s2.0-85017610450&partnerID=MN8TOARS.
    10.1016/j.jclepro.2017.03.117
  27. Henriques, B.; Fabris, D.; Souza, J.C.M.; Silva, F.S.; Mesquita-Guimarães, J.; Zhang, Y.; Fredel, M.. "Influence of interlayer design on residual thermal stresses in trilayered and graded all-ceramic restorations". Materials Science and Engineering C 71 (2017): 1037-1045. http://www.scopus.com/inward/record.url?eid=2-s2.0-85006293434&partnerID=MN8TOARS.
    10.1016/j.msec.2016.11.087
  28. Mesquita-Guimarães, J.; Leite, M.A.; Souza, J.C.M.; Henriques, B.; Silva, F.S.; Hotza, D.; Boccaccini, A.R.; Fredel, M.C.. "Processing and strengthening of 58S bioactive glass-infiltrated titania scaffolds". Journal of Biomedical Materials Research - Part A 105 2 (2017): 590-600. http://www.scopus.com/inward/record.url?eid=2-s2.0-84999019272&partnerID=MN8TOARS.
    10.1002/jbm.a.35937
  29. Galarraga-Vinueza, M.E.; Mesquita-Guimarães, J.; Magini, R.S.; Souza, J.C.M.; Fredel, M.C.; Boccaccini, A.R.. "Anti-biofilm properties of bioactive glasses embedding organic active compounds". Journal of Biomedical Materials Research - Part A 105 2 (2017): 672-679. http://www.scopus.com/inward/record.url?eid=2-s2.0-85003875983&partnerID=MN8TOARS.
    10.1002/jbm.a.35934
  30. Fabris, D.; Souza, J.C.M.; Silva, F.S.; Fredel, M.; Mesquita-Guimarães, J.; Zhang, Y.; Henriques, B.. "Thermal residual stresses in bilayered, trilayered and graded dental ceramics". Ceramics International 43 4 (2017): 3670-3678. http://www.scopus.com/inward/record.url?eid=2-s2.0-85007044591&partnerID=MN8TOARS.
    10.1016/j.ceramint.2016.11.209
  31. Fabris, D.; Souza, J.C.M.; Silva, F.S.; Fredel, M.; Mesquita-Guimarães, J.; Zhang, Y.; Henriques, B.. "The bending stress distribution in bilayered and graded zirconia-based dental ceramics". Ceramics International 42 9 (2016): 11025-11031. http://www.scopus.com/inward/record.url?eid=2-s2.0-84964335846&partnerID=MN8TOARS.
    10.1016/j.ceramint.2016.03.245
  32. Mesquita-Guimarães, J.; Garcia, E.; Osendi, M.I.; Sevecek, O.; Bermejo, R.. "Effect of aging on the onset of cracks due to redistribution of residual stresses in functionally graded environmental barrier coatings of mullite/ZrO2". Composites Part B: Engineering 61 (2014): 199-205. http://www.scopus.com/inward/record.url?eid=2-s2.0-84894380977&partnerID=MN8TOARS.
    10.1016/j.compositesb.2013.11.012
  33. Mesquita-Guimarães, J.; García, E.; Miranzo, P.; Osendi, M.I.; Cojocaru, C.V.; Lima, R.S.. "Mullite-YSZ multilayered environmental barrier coatings tested in cycling conditions under water vapor atmosphere". Surface and Coatings Technology 209 (2012): 103-109. http://www.scopus.com/inward/record.url?eid=2-s2.0-84866855931&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2012.08.044
  34. Garcia, E.; Mesquita-Guimarães, J.; Miranzo, P.; Osendi, M.I.; Cojocaru, C.V.; Wang, Y.; Moreau, C.; Lima, R.S.. "Phase composition and microstructural responses of graded mullite/YSZ coatings under water vapor environments". Journal of Thermal Spray Technology 20 1-2 (2011): 83-91. http://www.scopus.com/inward/record.url?eid=2-s2.0-78650714331&partnerID=MN8TOARS.
    10.1007/s11666-010-9589-6
  35. Garcia, E.; Mesquita-Guimarães, J.; Miranzo, P.; Osendi, M.I.. "Porous mullite and mullite-ZrO2 granules for thermal spraying applications". Surface and Coatings Technology 205 17-18 (2011): 4304-4311. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955118436&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2011.03.060
  36. Cojocaru, C.V.; Wang, Y.; Moreau, C.; Lima, R.S.; Mesquita-Guimarães, J.; Garcia, E.; Miranzo, P.; Osendi, M.I.. "Mechanical behavior of air plasma-sprayed YSZ functionally graded mullite coatings investigated via instrumented indentation". Journal of Thermal Spray Technology 20 1-2 (2011): 100-107. http://www.scopus.com/inward/record.url?eid=2-s2.0-78650692179&partnerID=MN8TOARS.
    10.1007/s11666-010-9586-9
  37. Garcia, E.; Mesquita-Guimarães, J.; Miranzo, P.; Osendi, M.I.; Wang, Y.; Lima, R.S.; Moreau, C.. "Mullite and mullite/ZrO 2-7wt.%Y 2O 3 powders for thermal spraying of environmental barrier coatings". Journal of Thermal Spray Technology 19 1-2 (2010): 286-293. http://www.scopus.com/inward/record.url?eid=2-s2.0-76449091412&partnerID=MN8TOARS.
    10.1007/s11666-009-9420-4
  38. Garcia, E.; Mesquita-Guimarães, J.; Miranzo, P.; Osendi, M.I.. "Crystallization studies in mullite and mullite-YSZ beads". Journal of the European Ceramic Society 30 10 (2010): 2003-2008. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952959429&partnerID=MN8TOARS.
    10.1016/j.jeurceramsoc.2010.04.018
  39. García, E.; Mesquita-Guimarães, J.; Osendi, M.I.; Miranzo, P.. "Thermal conductivity in mullite/ZrO2 composite coatings". Ceramics International 36 5 (2010): 1609-1614. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955588027&partnerID=MN8TOARS.
    10.1016/j.ceramint.2010.02.037
Thesis / Dissertation
  1. Mesquita-Guimarães, Joana. "The behaviour of Zirconia/Mullite multilayer coatings designed as EBC under water vapour and high-temperature conditions". PhD, Universidad Autónoma de Madrid, 2012. https://digital.csic.es/handle/10261/55055.
  2. Mesquita-Guimarães, Joana. "Evolution of the granulometry of calcite in the grinding of hard raw materials for monoporous paste". Degree, 2007.
  3. Mesquita-Guimarães, Joana. "Determination of porosity of porous ceramic tiles for adjusting the thermal conductivity and thermal comfort". Degree, Universidade Federal de Santa Catarina, 2005.
Website
  1. Pereira, A. B.; Mesquita-Guimarães, Joana. Centre for Mechanical Technology and Automation (TEMA) https://www.ua.pt/pt/tema. 2016.

Intellectual property

Licensing patent rights
  1. 2022. "CI-21-027 UFSC/UA". Portugal.
    In negotiation
Patent
  1. Thamyres H. Silva; Márcio C. Fredel; Mesquita-Guimarães, Joana. 2021. "PROCESSO DE MODIFICAÇÃO DA SUPERFÍCIE DE CARBONATO DE CÁLCIO PROVENIENTE DE CASCAS DE OSTRAS A PARTIR DA FUNCIONALIZAÇÃO COM RESÍDUOS DE ÓLEOS DE FRITURA". Brazil.
    Granted/Issued
  2. Mesquita-Guimarães, Joana. 2020. "ARCABOUÇOS DE VIDRO BIOATIVO REFORÇADO POR SEGUNDA FASE CERÂMICA PARA REPARAÇÃO ÓSSEA E PROCESSO DE OBTENÇÃO". Brazil.
    Granted/Issued
  3. Mesquita-Guimarães, Joana. 2009. "Procedimiento de obtención de material cerámico de aporte para técnicas de proyección térmica". Spain.
    Allowed

Other

Dataset
  1. Bólis, Káren; Márcio C. Fredel; Mesquita-Guimarães, Joana. Optimization of Pechini synthesis and characterization of Ce-TZP and Y-TZP mixtures using commercial and Pechini powders.
    10.13140/RG.2.2.23907.04641
  2. Lizandra Ramos; Márcio C. Fredel; Mesquita-Guimarães, J.. Processamento de arcabouços em zircônia revestidos com vidro bioactivo 58S.
    10.13140/RG.2.2.18952.52482
  3. Gabriella Viana; Daliana Muller; Márcio C. Fredel; Mesquita-Guimarães, Joana. Optimization of a Carbon Nanodots (CNDs) synthesis and development of CND's fluorescent coatings based on SiO2 sol-gel for dental applications.
    10.13140/RG.2.2.22307.96809
  4. Thaize Negri; Márcio C. Fredel; Mesquita-Guimarães, Joana. Synthesis and powder processing of 58S bioactive glass doped with bromide.
    10.13140/RG.2.2.10144.48644
  5. Helena Pizzolatti; Márcio C. Fredel; Mesquita-Guimarães, Joana. Alternative thermal treatment for Y-TZP and Ce-TZP composites.
    10.13140/RG.2.2.16540.80002
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2024/07/03 Mechanical analysis and dimensional control of 3D-printing microneedles for gingiva healing application Encontro de Ciência2024
FCT (Porto, Portugal)
2024/06/06 Microneedles fabrication via DLP for gingiva healing application: Dimensional control TEchMA 2024– 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions
Centre for Mechanical Technology and Automation (TEMA) (Portugal)
2024/06/06 The effect of S53P4 Bioactive glass coatings crystallinity and laser surface texturing on zirconia dental implants mineralisation and MC3T3-E1 cell adhesion TEchMA 2024– 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions
Centro de Tecnologia Mecânica e Automação (TEMA) - Universidade de Aveiro (Portugal)
2024/04/18 Bioactive coatings on double depth laser-textured zirconia substrates: mineralisation behaviour and cell adhesion ECerS Bioceramics Network Student Speech Contest
European Ceramics Society (Belgium)
2023/07/14 Bioactive zirconia dental implant surface functionalisation via laser technology: mineralisation behaviour and cells morphology analysis Research Summit 2023
University of Aveiro
2023/05/26 Double-depth texturization and bioactive coatings via laser technology for zirconia dental implants TEchMA2023 – 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions: book of abstracts
Universidade de Aveiro
2022/05 Laser texturing and numerical simulation of the heat transfer fluids for Cr2AlC MAX phase TEchMA 2022– 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions
Universidade de Aveiro (Portugal)
2022/02/23 Production of a hybrid zirconia and PEEK dental implant prototype with a functional gradient to improve biomechanical performance preventing peri-implantitis - Proof of concept project results Medisis Open day 2022
Medical sciences department of the university of aveiro
2022 Structural Performance of Dense Alumina-Zirconia Ceramics: An Overview of Conventional versus Additive Manufacturing Materiais 2022
Sociedade Portuguesa de Materiais
2022 Microstructural Modelling of the Thermoelastic Properties of Dense ZTA Ceramics Materiais 2022
Sociedade Portuguesa de Materiais
2020 Challenges and perspectives in additive manufacturing of ceramic materials: an overview of the mechanical properties in the alumina-zirconia system TEchMA2020 – 3rd International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions
University of Aveiro, Centre for Mechanical Technology and Automation (TEMA) (Aveiro, Portugal)
2019 Novel zirconia-bioactive glass scaffolds for bone regeneration 18th Brazil-MRS Meeting
Materials Research Society (Balneário de Camboriú, Brazil)
2019 TAMAZ3D-A new toll for technical ceramics 3D-Printing, Structural Properties of zirconia-alumina-based technical ceramics produced by additive manufacturing 2nd International Conference on TEMA: Mobilizing projects
Universidade de Aveiro Departmento de Mecânica (Aveiro, Portugal)
2019 Structural properties of Zirconia- Alumina based technical ceramics by produced additive manufacturing SHAPING7, 7th Shaping Conference
Universidade de Aveiro Departmento de Mecânica (Aveiro, Portugal)
2019 Cell biology evaluation of laser-sintered HAp and 45S5 bioactive glass coatings on micro-textured zirconia surfaces using MC3T3-E1 cells (primary osteoblasts) Workshop for Young Researchers in Ceramics and Glasses for Medical Applications, You-CGMed
Sociedad Española de Cerámica y Vidrio (Madrid, Spain)
2017/09/25 Wear and ageing behaviour of porous zirconia layers National Conference on Cellular Materials (MatCel’2017), International Conference of Dynamic Behaviour of Cellular Materials (DynMatCel’2017), MatCel’2017 & DynMatCel’2017
(Aveiro, Portugal)
2017/09/25 Open-cell and glass-ceramic filled cellular zirconia structures for biomedical applications National Conference on Cellular Materials (MatCel’2017), International Conference of Dynamic Behaviour of Cellular Materials (DynMatCel’2017), MatCel’2017 & DynMatCel’2017
(Aveiro, Portugal)
2017/09/17 Strengthening of ceramic scaffolds infiltrated with bioactive glass 58S European Congress and Exhibition on Advanced Materials and Processes, EUROMAT
(Thessaloniki, Greece)
2017/09/17 Characterization of open-cell and glass-ceramic filled cellular zirconia structures for biomedical applications European Congress and Exhibition on Advanced Materials and Processes, EUROMAT
(Thessaloniki, Greece)
2016 Characterization of dental zirconia waste resulting from CAD/CAM manufacturing process 22º Congresso Brasileiro de Engenharia e Ciência dos Materiais CBECIMAT
(Brazil)
2015/09/07 Processing and resistance enhancement of Titania scaffolds infiltrated with Bioglass 58S MatCel’2015 – 1ª Conferência de Materiais Celulares
(Aveiro, Portugal)
2015 Cellular titanium dioxide ceramics for bone reconstruction Congresso dos Estudantes de Ciência e Engenharia de Materiais do Mercosul (CECEMM)
UFSCar (São Carlos, Brazil)
2015 Characterization of Noble Metallic Thin Coatings on Lead Glass substrates Materiais 2015
(Aveiro, Portugal)
2010/10/27 Mechanical Behaviour of mullite-based multilayer coatings EBC corrosion under Conditions Student contest oral presentation, 50th Annual Congress of the Spanish Society of Ceramics and Glass (SECV)
(Madrid)
2010/06/06 Water-based corrosion of mullite multilayer EBC coatings 11th International Conference on Modern Materials and Technologies (CIMTEC 2010)
(Montecatini Terme, Italy)
2010/05/03 Mechanical Behaviour of Air Plasma Sprayed Mullite Functionally Graded YSZ Employed within The Environmental Barrier Coatings: A Study via Instrumented Indentation International Thermal Spray Conference & Exposition (ITSC 2010)
(Singapura, Singapore)
2010/05/03 Phase Composition and microstructural responses of crystalline mullite / YSZ coating under water steam environments International Thermal Spray Conference & Exposition (ITSC 2010)
(Singapura, Singapore)
2009/11/15 Powder Processes conditioning for thermal spraying Shaping 4 Fourth International Conference on Advanced Ceramics Shaping
(Madrid, Spain)
2009/06/21 Crystallization studies on thermal sprayed Mullite and Mullite – YSZ 11th International Conference and Exhibition of the European Ceramic Society
European Ceramic Society (Cracóvia, Poland)
2009 Mullite Coatings Produced by APS and SPS: Effect of Mullite Powder Spray Processing and Morphology on the microstructure, Crystallinity and Mechanical Properties International Thermal Spray Conference & Exposition (ITSC 2009)
(Las Vegas, United States)
2009 Mullite and Mullite/ZrO2-7wt% Y2O3 powders for Thermal Barrier Coatings Spraying of Environmental International Thermal Spray Conference & Exposition (ITSC 2009)
(Las Vegas, United States)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2023/11 - Current Innovative Microneedles-Based Dental Therapies for Gingival Healing
Supervisor
 Doctoral Program (PhD)
Universidade de Aveiro Departamento de Física, Portugal
2023/10 - Current Optimização de técnicas de revestimento de implantes de zirconia com biovidros
Supervisor
Universidade de Aveiro Departamento de Física, Portugal
2023/10 - Current Development of angiogenic coatings for dental implants
Supervisor
Universidade de Aveiro Departamento de Física, Portugal
2023/10 - Current Microneedles for osseointegration and gingiva healing on dental application
Supervisor
Universidade de Aveiro Departamento de Física, Portugal
2023 - Current Development of antibacterial coatings for dental implants
Supervisor
 MIEB (Master)
Universidade de Aveiro Departamento de Física, Portugal
2023 - Current Development of angiogenic coatings for dental implants
Supervisor
 MIEB (Master)
Universidade de Aveiro Departamento de Física, Portugal
2022 - Current New Dental Prosthesis: Analisys and Simulation
Supervisor
 Master in Mechinal engineering (Master)
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2022 - Current Design and Assembly of a 3D Prototyping Machine (Powder Bed) Coupled to a Laser Equipment
Supervisor
 Master in Mechanical engineering (Master)
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2022 - Current Optimization of bioactive zirconia dental implant surface functionalisation via laser technologies
Supervisor
 Mestradoi integrado em Engenharia biomédica (Master)
Universidade de Aveiro Departamento de Física, Portugal
2024/03/11 - 2024/07/19 Propriedades mecânicas de implantes em zircónia e PEEK
Supervisor
Universidade de Aveiro Departamento de Física, Portugal
2024/03/11 - 2024/07/17 Análise de resinas à base de àgua e poliméricas para a impressão de microagulhas
Supervisor
Universidade de Aveiro Departamento de Física, Portugal
2023/10 - 2024/07/16 Extrusão de cimentos ósseos para construção de scaffolds
Supervisor
Universidade de Aveiro Departamento de Física, Portugal
2024/03/11 - 2024/07/10 Estudo de cimentos ósseos à base de vidros bioativos para impressão 3D recorrendo a um algoritmo predictivo para impressão de scaffolds com referência
Supervisor
Universidade de Aveiro Departamento de Física, Portugal
2023 - 2023 Revestimentos bioativos e antibacterianos para a eliminação do biofilme
Supervisor
 Mestrado integrado em Engenharia Biomédica (Degree)
Universidade de Aveiro Departamento de Física, Portugal
2023 - 2023 Thread optimization in an existing hybrid dental implant using laser technology
Supervisor
 Licenciatura em Engenharia Biomédica (Degree)
Universidade de Aveiro, Portugal
2022 - 2023 Development of a injection system for PEEK infiltration
Supervisor
 Master in Mechanical engineering (Master)
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2021 - 2022 Study of the metamaterial effect on protection against chewing stresses in zirconia and PEEK hybrid dental implants
Supervisor
 Master in Mechanical Engineering (Master)
Universidade de Aveiro, Portugal
2021 - 2022 Production of zirconia laser textured surfaces coated with Bioglass 58S for biomedical applications
Supervisor
 1st cycle degree in Biomedical Engineering (Degree)
Universidade de Aveiro, Portugal
2021 - 2022 Study of the integration of Nacre in hydrogels for bone (or osteochondral) application
Co-supervisor
 1st cycle degree in Biomedical Engineering (Degree)
Universidade de Aveiro, Portugal
2021/03/01 - 2021/07/23 Mechanical stimulation of hybrid nanocomposites produced by additive manufacturing
Co-supervisor
 Mestrado Integrado em Engenharia Biomédica (Degree)
Universidade de Aveiro, Portugal
2021/02/01 - 2021/07 Optimization of laser textured profiles for the thermal efficiency of heat exchangers produced in MAX phase
Supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade de Aveiro, Portugal
2021 - 2021 Preparation and analysis of stress in multilayer systems of silicates and graphene oxide for aerospace application
Supervisor
 Master in Mechanical Engineering (Scientific initiation)
Universidade de Aveiro, Portugal
2018/01 - 2018/05 Densification study of ceramic matrix composites by means of Selective Laser Sintering (SLS) technique, obtained by Physical Vapor Deposition (PVD) of titanium in zirconia agglomerates
Supervisor
 Mestrado em Engenharia de Materiais (Scientific initiation)
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2017/02 - 2017/10/31 The potential use of oyster shell waste in new value-added by-product
Supervisor
 Engenharia de Materiais (Master)
Universidade Federal de Santa Catarina, Brazil
2017/02 - 2017/05 Characterization of hot pressed LZS material: crystallization and microstructure
Supervisor
 Engenharia de Materiais (Scientific initiation)
Universidade Federal de Santa Catarina, Brazil

Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2016/05 - 2016/08 Carbon nanodots Eco-friendly synthesis for fluorescent sol-gel coatings
Supervisor
 Engenharia de Materiais (Scientific initiation)
Universidade Federal de Santa Catarina, Brazil
2016/05 - 2016/08 Optimization of an FGM multilayer of Zirconia porcelain by pressing, delamination analysis
Co-supervisor
 Engenharia de Materiais (Scientific initiation)
Universidade Federal de Santa Catarina, Brazil
2016/02 - 2016/05 FGM Zirconia-Dental Porcelain through oriented freeze casting for adhesion improvement on dental implants
Supervisor
 Engenharia de Materiais (Scientific initiation)
Universidade Federal de Santa Catarina, Brazil
2016/02 - 2016/05 Alternative thermal treatment for Y-TZP and Ce-TZP mixtures sintering
Supervisor
 Engenharia de Materiais (Scientific initiation)
Universidade Federal de Santa Catarina, Brazil
2016/02 - 2016/05 Construction and characterization of Zirconia scaffolds coated with bioactive glass 58S
Supervisor
 Engenharia de Materiais (Master)
Universidade Federal de Santa Catarina, Brazil
2015/09 - 2015/12 Residual stresses analysis via Raman spectroscopy of Y-TZP and Ce-TZP mixtures
Supervisor
 Engenharia de Materiais (Scientific initiation)
Universidade Federal de Santa Catarina, Brazil
2015/09 - 2015/12 Zirconia stabilization with titanium isopropoxide via Pechini synthesis
Supervisor
 Mestrado em Engenharia de Materiais (Scientific initiation)
Universidade de Aveiro CICECO, Portugal

Universidade Federal de Santa Catarina Departamento de Engenharia Mecânica, Brazil
2015/09 - 2015/12 Valorization of zirconia waste resulting from CAD/CAM manufacturing process
Supervisor
 Engenharia de Materiais (Master)
Universidade Federal de Santa Catarina, Brazil
2015/05 - 2015/08 Optimization of Alumina Camphene on Freeze casting process
Supervisor
 Engenharia de Materiais (Scientific initiation)
Universidade Federal de Santa Catarina, Brazil
2015/05 - 2015/08 Mechanical Properties and colour analysis of Y-TZP and Ce-TZP mixtures, for dental implant applications
Supervisor
 Engenharia de Materiais (Scientific initiation)
Universidade Federal de Santa Catarina, Brazil
2015/02 - 2015/05 Optimization of Freeze Casting processing of Bioactive Glass 58S, for bone graft
Supervisor
 Engenharia de Materiais (Scientific initiation)
Universidade Federal de Santa Catarina, Brazil
2015/02 - 2015/05 TiO2 Scaffolds for Bone Tissue Engineering Applications: Processing and Enhancement of Mechanical Properties
Supervisor
 Engenharia de Materiais (Scientific initiation)
Universidade Federal de Santa Catarina, Brazil
2015/02 - 2015/05 Synthesis and optimization of sintered samples of Bioactive glass 58S
Supervisor
 Engenharia de Materiais (Scientific initiation)
Universidade Federal de Santa Catarina, Brazil
2014/09 - 2014/12 Optimization of Pechini Synthesis and Characterization of Ce-TZP and Y-TZP. Mixtures using Commercial and Pechini Powders
Supervisor
 Engenharia de Materiais (Master)
Universidade Federal de Santa Catarina, Brazil
2013 - 2013 Preparation of alternative paints for crystal glass decoration
Co-supervisor
 Master on Materials Engineering (Scientific initiation)
Universidade de Aveiro CICECO, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2024/09/26 - Current I Workshop on Zirconia Dental Implants - Concept, Manufacturing, Mechanical and Biological Properties at the University of Aveiro in collaboration with Z-Systems GmbH (Swiss company of Zirconia implants) (2024/09/26)
Workshop (Co-organisor)
 Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2024 - Current SCIENTIFIC COMMITTEE And PROGRAM COMMITTE 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions - TEchMA2024 (2024)
Conference (Member of the Scientific Committee)
 Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2022/09 - 2023/05 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions - TEchMA2023 (2022/09 - 2023/05)
Conference (Member of the Organising Committee)
 Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2022/02 - 2022/05 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions - TEchMA2022 (2022 - 2022)
Conference (Member of the Organising Committee)
 Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2015 - 2015 III International Meeting: Functionally Graded Materials 2015 (2015 - 2015)
Meeting (Member of the Organising Committee)
 Universidade Federal de Santa Catarina, Brazil

Event participation

Activity description
Type of event 		Event name
Institution / Organization
2022 - 2022 Chairman Session - Multiscale Technologies and Devices for Medicine, Environment & Energy
Congress
 TEchMA2022: 5th International Conference on Technologies for the Wellbeing and Sustainable
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2020/04/15 - 2020/04/17 Chairman Session - yCAM 2020 - young Ceramists Additive Manufacturing Forum
Congress
 yCAM 2020 - young Ceramists Additive Manufacturing Forum
European Ceramic Society AISBL, Belgium
2020/01/22 - 2020/01/23 Chairman Session - Multiscale Technologies and Devices for Medicine, Environment & Energy
Conference
 TEchMA2020: 3rd International Conference on Technologies for the Wellbeing and Sustainable
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2023/11 Bioactive coatings on double depth laser-textured zirconia substrates: mineralization behaviour and cell adhesion
Supervisor
 Luís Eduardo Martins Pereira (Master)
Universidade de Aveiro Departamento de Física, Portugal
2023/10 Design and Assembly of a 3D Prototyping Machine (Powder Bed) Coupled to a Laser Equipment
Supervisor
 Gonçalo Portugal da Cunha Leite da Silva (Master)
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
2023/10 New Dental Prosthesis: Analisys and Simulation
Supervisor
 José Pedro Carvalho Sampaio (Master)
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
2023/07 Desenvolvimento de um sistema de conformação de PEEK
Supervisor
 Ricardo José Da Rocha Baptista (Master)
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
2023/07 Defesa do Projecto de tese do Aluno de doutoramento Álvaro Pires Programa doutoral em Engenharia Mecânica
(Thesis) Arguer
 Álvaro Filipe Marques Ferreira Proença Pires (Other)
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
2023 Analysis of angiogenesis agents for coatings on dental implants
Supervisor
 Bárbara Baptista (Other)
Universidade de Aveiro Departamento de Física, Portugal
2023 Study of radial cracks in differential Case‘s laser welding
President of the jury
 Bruno Filipe Nóbrega Guerra (Master)
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
2023 Laser welding of additive manufactured thermoplastic components
President of the jury
 Daniel Rodrigues Sousa (Master)
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
2023 Influência dos parâmetros de um feixe laser na qualidade de gravação em componentes
President of the jury
 Paulo Jorge Amorim Rosa (Master)
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
2023 Redução dos custos do gás de soldadura na área dos robôs MAG
President of the jury
 Pedro José Oliveira Ferreira (Master)
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
2023 Continuous wave laser welding of thermoplastics
President of the jury
 Rodrigo Sousa Domingues (Master)
Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
2023 Revestimentos bioativos e antibacterianos para a eliminação do biofilme oral
Supervisor
 Liliana Alves Martins (Other)
Universidade de Aveiro Departamento de Física, Portugal
2023 Dental implant screw optimization based on laser technology
Supervisor
 Beatriz dos Santos Marques (Other)
Universidade de Aveiro Departamento de Física, Portugal
2022 Study of the integration of Nacre in hydrogels for bone (or osteochondral) application
Thesis Member
 Tânia Rama (Other)
Universidade de Aveiro Departamento de Física, Portugal
2022 DEVELOPMENT OF A NEW CONCEPT OF ZIRCONIA AND PEEK DENTAL IMPLANT
Supervisor
 ANA JORGE PEREIRA DA SILVA (Master)
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2021/07 Optimisation of laser textured profiles for the thermal efficiency of heat exchangers produced in MAX phase
Supervisor
 Rafaela Reis (Master)
Universidade de Aveiro, Portugal
2021 Mechanical stimulation of hybrid nanocomposites produced by additive manufacturing
Thesis Member
 Júnia Rodrigues (Other)
Universidade de Aveiro Departamento de Física, Portugal
2020 Application of Laser Technology for Cleaning Metal Surfaces in Aeronautics
(Thesis) Main arguer
 Ana Laura Loureiro Martins (Master)
Universidade de Aveiro Departamento de Física, Portugal

Instituto de Nanoestruturas Nanomodelação e Nanofabricação, Portugal
2018/06 Densification study of ceramic matrix composites by means of Selective Laser Sintering (SLS) technique, obtained by Physical Vapor Deposition (PVD) of titanium in zirconia agglomerates
Supervisor
 Ana isabel Oliveira (Other)
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2016 Valorization of zirconia waste resulting from CAD/CAM manufacturing process
Supervisor
 Paula Faust Gouveia (Master)
Universidade Federal de Santa Catarina, Brazil
2016 Analysis of thermal and mechanical tensions in ceramics with a functional gradient of properties
(Thesis) Main arguer
 Douglas Fabris (Master)
Universidade Federal de Santa Catarina, Brazil
2016 Construction and characterization of Zirconia scaffolds coated with bioactive glass 58S
Supervisor
 Lizandra Ramos (Master)
Universidade Federal de Santa Catarina, Brazil
2015 Optimization of Pechini Synthesis and Characterization of Ce-TZP and Y-TZP. Mixtures using Commercial and Pechini Powders
Supervisor
 Karen Bolis (Master)
Universidade Federal de Santa Catarina, Brazil
2015 TiO2 Scaffolds for Bone Tissue Engineering Applications: Processing and Enhancement of Mechanical Properties
Supervisor
 Mirella Alves Leite (Master)
Universidade Federal de Santa Catarina, Brazil
2014 Laser curing of golden ink over crystal glass
Thesis Member
 Mariana Pires (Master)
Universidade de Aveiro Departamento de Física, Portugal
2013 Laser technology in gold decoration of pieces of crystal glass
Thesis Member
 Ana Rita Bento Montes (Master)
Universidade de Aveiro Departamento de Física, Portugal

Association member

Society Organization name Role
2019 - Current Sociedade Portuguesa de Cerâmica e Vidro (SPCV) Member
2019 - Current Sociedade Portuguesa de Materiais (SPM) Member
2017 - Current European Ceramic Society, ECERS
2009 - Current Sociedad Española de Cerámica y Vidrio, SECV

Committee member

Activity description
Role 		Institution / Organization
2023 - Current Elaboration of the annual reports of the research unit Center for Mechanical Technology and Automation - TEMA at the University of Aveiro.
Member
 Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2022/05 - Current Assistant to the Directors of the research unit Center for Mechanical Technology and Automation - TEMA at the University of Aveiro.
Member
 Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2022/05 - Current Elaboration of the annual reports of the research unit Center for Mechanical Technology and Automation - TEMA at the University of Aveiro.
Member
 Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2022/05 - Current Vogal on the research council meetings of the research unit Center for Mechanical Technology and Automation - TEMA at the University of Aveiro.
Member
 Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2024/01/11 - 2024/04/11 Elaboration of the Programmatic project for the research institution (TEMA - Centre for Mechanical Technology and Automation) funding for the next period of 2025 -2029
Member
 Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Conference scientific committee

Conference name Conference host
2024/06/06 - Current TEchMA 2024– 7th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions Centro de Tecnologia Mecânica e Automação (TEMA) - Universidade de Aveiro
2023 - Current TEchMA2023 – 6th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions: book of abstracts Universidade de Aveiro
2022 - 2022 5th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions - TEchMA2022 TEMA - Centre for Mechanical Technology and Automation
2021 - 2021/01/21 4th International Conference on Technologies for the Wellbeing and Sustainable Manufacturing Solutions TEMA - Centre for Mechanical Technology and Automation
2019/11/12 - 2019/11/15 8th Global Conference on Materials Science and Engineering (CMSE 2019) China

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2024 - Current Joining Processes (Licenciatura) Universidade de Aveiro Departamento de Engenharia Mecânica, Portugal
2008/09 - Current Glass Furnaces and Refractory Materials Enseñanzas Superiores en Artes Plásticas, especialidad Vidrio (Bachelor) Escuela Superior del Vidrio, Spain
2022 - 2022 Curso Avançado em Investigação Científica - UC 60017 - Soluções de fabrico sustentável e tecnologias para o bem-estar Curso Avançado em Investigação Científica (Curso de mestrado (conclusão do curso de especialização)) Universidade de Aveiro, Portugal

Evaluation committee

Activity description
Role 		Institution / Organization Funding entity
2024/10/16 - Current One Research grant (Ref.: BI_20_DEM_TEMA_2024_EMBRACER) under the research project, called “EMBRACER intErconnecting MoBility acRoss europeAn CitiEs and subuRbs (01C0056)”
Evaluator
 Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal Interreg Europe
2024/07/11 - 2024/07/11 Defesa do Projecto de tese do Aluno de doutoramento Sathishkumar Duraisamy Programa doutoral em Engenharia Mecânica
Evaluator
 Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2024/07/11 - 2024/07/11 Defesa do Projecto de tese do Aluno de doutoramento Eyuel Abate Lemma Programa doutoral em Engenharia Mecânica
Evaluator
 Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2024/04/04 - 2024/05/02 Evaluator of proposals submitted to the French National Research Agency (ANR) in the frame of the Appel à projets générique 2024
Evaluator
 French National Research Agency (ANR), France French National Research Agency (ANR)
2019 - 2019 two master grants (Reference ADAPTPROSTHESIS_MSc_2019/01) under the research project PTDC/EMS-TEC/5422/2014 (FCT) / POCI-01-0145-FEDER-016741 (FEDER), called "Development of smart designed adaptive prosthesis for Orthopaedic Applications",
Member
 European Regional Development Fund

Fundação para a Ciência e a Tecnologia
2018 - 2018 two master grants (Reference COMP4TA_MSc_2018/01) under the research project POCI-01-0145-FEDER-030416, called "Advanced Metal-Diamond Composites for thermal applications",
Member
 Universidade do Minho, Portugal European Regional Development Fund
2018 - 2018 two master grants (Reference ADD_Additive_MSc_2018/01) under the research project ADD_Additive manufacturing to Portuguese industry_Proj. Nº. 024533
Member
 Universidade do Minho, Portugal European Regional Development Fund
2017 - 2017 one master grant (Reference ADAPTPROSTHESIS_MSc_2017/02) under the research project PTDC/EMS-TEC/5422/2014 (FCT) / POCI-01-0145-FEDER-016741 (FEDER), called "Development of smart designed adaptive prosthesis for Orthopaedic Applications".
Member
 Universidade do Minho, Portugal Associação para a Inovação e Desenvolvimento da FCT

Journal scientific committee

Journal title (ISSN) Publisher
2022 - Current Frontiers in Ceramics Frontiers
2022 - Current Frontiers in ceramics - Ceramics applications Frontiers
2021 - Current Prosthesis (2673-1592) Multidisciplinary Digital Publishing Institute
2020 - Current Journal of Coatings Technology and Research (1935-3804) Springer-Verlag
2020 - Current Dentistry MDPI
2020 - Current Materials Research (1980-5373) SciELO
2020 - Current SN Applied Sciences (2523-3971) Springer-Verlag
2020 - Current International Orthodontics (1761-7227) Elsevier
2019 - Current Journal of Cleaner Production (0959-6526) Elsevier
2019 - Current Ceramics (2571-6131) MDPI AG
2019 - Current Ceramics International (0272-8842) Elsevier
2019 - Current Symmetry (2073-8994) MDPI AG
2019 - Current ACS Sustainable Chemistry & Engineering (2168-0485) American Chemical Society
2019 - Current Materials Research Express (2053-1591) IOP Publishing
2018 - Current Applied Sciences (2076-3417) MDPI AG
2018 - Current Coatings (2079-6412) MDPI AG
2018 - Current Materials (1996-1944) MDPI AG
2017 - Current RSC Advances (2046-2069) The Royal Society of Chemistry
2017 - Current Journal of Sol-Gel Science and Technology (1573-4846) Springer-Verlag
2017 - Current Journal of Nanomedicine & Nanotechnology (2157-7439) OMICS Publishing Group
2017 - Current Journal of Material Sciences & Engineering
2017 - Current Journal of Tissue Science & Engineering (2157-7552) OMICS Publishing Group
2017 - Current Biomaterials and Medical Applications (2577-0268) OMICS Publishing Group
2017 - Current International Journal of Innovative Research in Science Engineering and Technology (2319-8753) Ess and Ess Research Publications
2017 - Current EC Dental Science E-Cronicon
2009 - Current Surface and Coatings Technology (0257-8972) Elsevier

Mentoring / Tutoring

Topic Student name
2022 - Current Ceramic Dental Implant: Concept, surface functionalization and biological properties Catarina Passos
Distinctions

Award

2024 ECERS JECS Trust
JECS Trust, Belgium
2023 Best oral presentation
Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal
2018 ECERS JECS Trust
2015 First Award for Oral Presentation
2010 Best Poster in the Thermal Spray Conference & Exposition: Thermal Spray: Global Solutions for Future Applications (ITSC 2010)

Other distinction

2021 Highly cited paper Certificate
2017 Cover page of Journal of Biomedical Materials Research Part A
2010 Cover page of journal Ceramics International