???global.info.a_carregar???
Antonio Riveiro Rodríguez is a Industrial Engineer from the University of Vigo in 2005, PhD in Applied Physics from the same University in 2009, and lecturer in solid mechanics from 2019. He has a large experience in laser processing (since 2005) for its application in different research fields. He has also been involved in biomaterials research and laser modification and synthesis of biomaterials since 2007. His most relevant research lines include works on: Laser macroprocesses and laser microprocesses. The work in this field is summarized in the publication of 6 articles in JCR-indexed journals, 1 book chapter as well as the granting of 1 national patent. He has also been recognized with an award in one of the most relevant international conferences in the field of laser materials processing (ICALEO'06). The Extraordinary Doctorate Award has also been granted to us (2009/10 academic year). In the field devoted to the laser microprocessing, he have intensely involved in two research lines: the generation of nanofibres and the production of nanoparticles by means of laser-based techniques for biomedical applications. Work in these lines has led to the publication of 18 papers in JCR-indexed journals. He has collaborated, from the beginning, in the development of the "laser spinning" technique to produce bioactive glass nanofibres. This collaboration led to the publication of 2 works in the reputed scientific journals "Advanced Functional Materials" and Science Advances. In addition, he has helped to develop the experimental systems needed for the production of nanoparticles by laser ablation for antibacterial applications. Since 2012, he has also worked on the surface modification of biomaterials (mainly polymers) to promote their biocompatibility. This resulted in the publication of 7 articles in JCR-indexed journals. He performed research stays at the Lappeenranta Laser Processing Center (Finland, Prof. V. Kujanpaa), and the School of Materials (University of Manchester, Prof. J. Robson). He has also received two postdoctoral grants (Plan I2C-Xunta de Galicia) to perform postdoctoral research stays at Imperial College London (Bioglass lab, Prof. J. Jones) and in the University of Minho (3Bs-Biomaterials, Biodegradables and Biomimetics lab, Prof. R.L. Reis & Dr. R.A. Pires). He has also been involved in the supervision of 1 PhD thesis (currently supervising 3 more); 4 MsC dissertations; 5 BSc dissertations; and 4 Final Degree Projects, all at the University of Vigo. Finally, as a result of his work, he has been cited 1,676 times (source Publons), with a total of 149 publications with an h-index of 23.
Read full resume ↓
Identification

Personal identification

Full name
Antonio Riveiro Rodríguez

Citation names

  • Riveiro, Antonio

Author identifiers

Ciência ID
491E-93FD-7001
ORCID iD
0000-0002-5187-9508

Websites

Education
Degree Classification
2006 - 2009/12/16
Concluded
 Programa Oficial de Doctorado en Fisica Aplicada (Doutoramento)
Universidade de Vigo - Campus Lagoas Marcosende, Spain
"An lisis te rico-experimental y optimizaci n del procesamiento avanzado mediante l ser de aleaciones de aluminio para la industria aerona tica" (THESIS/DISSERTATION)
2008/07/24
Concluded
 Ensayos de materiales metalicos y biomateriales (Pós-Graduação)
Universidad Nacional de Educación a Distancia (UNED), Spain
2005/07/29
Concluded
 Ingeniero Industrial (Bacharelato)
Escuela T cnica Superior de Ingenieros Industriales, Spain
Affiliation

Science

Category
Host institution 		Employer
2018 - 2019 Postdoc (Research) Universidade de Vigo - Campus Lagoas Marcosende, Spain
Universidade de Vigo - Campus Lagoas Marcosende, Spain
2017/04/30 - 2017/06/29 Researcher (Research) FEUGA: Fundación Empresa-Universidad Gallega, Spain
2011 - 2014 Postdoc (Research) Universidade de Vigo, Spain
Universidade de Vigo, Spain
2006 - 2010 Researcher (Research) Universidade de Vigo, Spain
Universidade de Vigo, Spain

Teaching in Higher Education

Category
Host institution 		Employer
2022/01/11 - Current Associate Professor (University Teacher) Universidade de Vigo - Campus Lagoas Marcosende, Spain
Universidade de Vigo - Campus Lagoas Marcosende, Spain
2019/09/09 - 2022/01/10 Assistant Professor (University Teacher) Universidade de Vigo - Campus Lagoas Marcosende, Spain
Universidade de Vigo - Campus Lagoas Marcosende, Spain
2010 - 2011 Invited Assistant (University Teacher) Centro Universitario de la Defensa – Marin, Spain
Centro Universitario de la Defensa – Marin, Spain
Outputs

Publications

Book
  1. Lusquiños, F.; Boutinguiza, M.; Comesaña, R.; Riveiro, A.; Quintero, F.; Pou, J.. Production of calcium phosphate particles from marine wastes by gas jet assisted laser heating. 2008.
Book chapter
  1. Arias-González, F.; Barro, O.; del Val, J.; Lusquiños, F.; Fernández-Arias, M.; Comesaña, R.; Riveiro, A.; Pou, J.. "Laser-directed energy deposition". In Additive Manufacturing, 121-157. Elsevier, 2021.
    10.1016/b978-0-12-818411-0.00003-3
  2. Penide, Joaquín; Quintero, Félix; del Val, Jesús; Comesaña, Rafael; Lusquiños, Fernando; Riveiro, Antonio; Pou, Juan. "Bioactive glass nanofibers for tissue engineering". In Materials for Biomedical Engineering, 329-356. Elsevier, 2019.
    10.1016/b978-0-08-102814-8.00012-3
  3. Riveiro, A.; del Val, J.; Comesaña, R.; Lusquiños, F.; Quintero, F.; Boutinguiza, M.; Pou, J.. "Laser Additive Manufacturing Processes for Near Net Shape Components". In Near Net Shape Manufacturing Processes, 105-141. Springer International Publishing, 2019.
    Published • 10.1007/978-3-030-10579-2_5
  4. Riveiro, Antonio; Chantada, Adolfo; Soto, Ramón; del Val, Jesús; Arias-González, Felipe; Comesaña, Rafael; Boutinguiza, Mohamed; et al. "Laser surface texturing of thermoplastics to improve biological performance". In Materials for Biomedical Engineering, 29-56. Elsevier, 2019.
    10.1016/b978-0-12-816874-5.00002-5
  5. Riveiro, A.; Quintero, F.; Pou, J.. "Laser Fusion Cutting of Difficult Materials". In Advances in Laser Materials Processing, 43-67. Elsevier, 2018.
    Published • 10.1016/b978-0-08-101252-9.00003-0
Conference paper
  1. Lusquiños, F.; Soto, R.; Boutinguiz, M.; Quintero, F.; Riveiro, A.; Comesaña, R.; Del Val, J.; Pou, J.. "“Industrial applications of lasers” at the University of Vigo as legacy of Professor Mariano Pérez-Amor". 2018.
    10.1016/j.procir.2018.08.004
  2. Penide, J.; Quintero, F.; Arias-González, F.; Fernández, A.; Del Val, J.; Comesaña, R.; Riveiro, A.; Lusquiños, F.; Pou, J.. "Everlasting dark printing on alumina by laser". 2016.
    10.1016/j.phpro.2016.08.016
  3. Boutinguiza, M.; Meixus, M.; Del Val, J.; Riveiro, A.; Comesaña, R.; Lusquiños, F.; Pou, J.. "Synthesis and characterization of Pd nanoparticles by laser ablation in water using nanosecond laser". 2016.
    10.1016/j.phpro.2016.08.005
  4. Lusquiños, F.; Del Val, J.; Arias-González, F.; Comesaña, R.; Quintero, F.; Riveiro, A.; Boutinguiza, M.; et al. "Bioceramic 3D implants produced by laser assisted additive manufacturing". 2014.
    10.1016/j.phpro.2014.08.176
  5. Penide, J.; Quintero, F.; Del Val, J.; Comesaña, R.; Lusquiños, F.; Riveiro, A.; Pou, J.. "Laser Spinning: A new technique for nanofiber production". 2014.
    10.1016/j.phpro.2014.08.119
  6. Lusquiños, F.; Arias-González, F.; Penide, J.; Del Val, J.; Comesaña, R.; Quintero, F.; Riveiro, A.; et al. "Laser bioengineering of glass-titanium implants surface". 2013.
    10.1117/12.2026115
  7. Boutinguiza, M.; Comesaña, R.; Val, J.D.; Arias-González, F.; Penide, J.; Quintero, F.; Riveiro, A.; Lusquiños, F.; Pou, J.. "Marine resources and sub-products valorisation for medical applications by laser assisted techniques". 2013.
  8. Arias-González, F.; Del Val, J.; Comesaña, R.; Lusquiños, F.; Quintero, F.; Riveiro, A.; Boutinguiza, M.; Pou, J.. "Processing of pure Ti by rapid prototyping based on laser cladding". 2013.
    10.1117/12.2026114
  9. Quintero, F.; Riveiro, A.; Lusquiños, F.; Penide, J.; Arias-González, F.; Del Val, J.; Comesaña, R.; Boutinguiza, M.; Pou, J.. "Laser processing of phenolic wood substitutes". 2013.
    10.1117/12.2026113
  10. Boutinguiza, M.; Del Val, J.; Riveiro, A.; Comesaña, R.; Lusquiños, F.; Pou, J.. "Laser assisted production of calcium phosphate nanoparticles from marine origin". 2013.
  11. Penide, J.; Quintero, F.; Riveiro, A.; Sánchez-Castillo, A.; Comesaña, R.; Del Val, J.; Lusquiños, F.; Pou, J.. "Laser removal of graffiti from pink morelia quarry". 2013.
    10.1117/12.2026194
  12. Quintero, F.; Penide, J.; Comesaña, R.; Lusquiños, F.; Riveiro, A.; Pou, J.. "Production of glass nanofibers with tailored compositions by laser spinning". 2013.
  13. M. Boutinguiza; Antonio Riveiro Rodriguez; J. del Val; A. Riveiro; R. Comesaña; F. Lusquiños; Juan Pou. "Laser assisted production of calcium phosphate nanoparticles from marine origin". 2013.
    10.2351/1.5062984
  14. Del Val, J.; Lusquiños, F.; Comesaña, R.; Riveiro, A.; Quintero, F.; Pou, J.. "A highly versatile novel technique based on laser cladding to produce coatings in the micrometer range". 2013.
    10.2351/1.5062917
  15. Boutinguiza, M.; Comesaña, R.; Val, J.D.; Arias-González, F.; Penide, J.; Quintero, F.; Riveiro, A.; Lusquiños, F.; Pou, J.. "Marine resources and sub-products valorisation for medical applications by laser assisted techniques". 2013.
    10.2351/1.5062889
  16. Del Val, J.; Riveiro, A.; Comesaña, R.; Lusquiños, F.; Bountinguiza, M.; Quintero, F.; Pou, J.. "Laser-assisted manufacturing of porous metallic structures". 2012.
  17. Riveiro, A.; Soto, R.; Comesaña, R.; Boutinguiza, M.; Del Val, J.; Quintero, F.; Lusquiños, F.; Pou, J.. "Laser surface texturing of bioactive materials". 2012.
  18. Penide, J.; Quintero, F.; Riveiro, A.; Sánchez-Castillo, A.; Comesaña, R.; Del Val, J.; Lusquiños, F.; Pou, J.. "Laser cleaning of graffiti from building Stone using high power diode laser". 2012.
    10.2351/1.5062513
  19. Riveiro, A.; Soto, R.; Comesaña, R.; Boutinguiza, M.; Del Val, J.; Quintero, F.; Lusquiños, F.; Pou, J.. "Laser surface texturing of bioactive materials". 2012.
    10.2351/1.5062558
  20. Del Val, J.; Riveiro, A.; Comesaña, R.; Lusquiños, F.; Bountinguiza, M.; Quintero, F.; Pou, J.. "Laser-assisted manufacturing of porous metallic structures". 2012.
    10.2351/1.5062413
  21. Comesaña, R.; Lusquiños, F.; Del Val, J.; Quintero, F.; Riveiro, A.; Boutinguiza, M.; Jones, J.R.; Hill, R.G.; Pou, J.. "One-step production of BG implants by laser cladding". 2011.
  22. Quintero, F.; Comesaña, R.; Lusquiños, F.; Riveiro, A.; Jones, J.R.; Hill, R.G.; Pou, J.. "Production of zinc and strontium containing bioactive glass nanofibers". 2011.
  23. Del Val, J.; Comesaña, R.; Lusquiños, F.; Quintero, F.; Riveiro, A.; Boutinguiza, M.; Pou, J.. "Laser-assisted manufacturing of bioactive glass implants for cranial defect restoration". 2011.
  24. Del Val, J.; Riveiro, A.; Comesaña, R.; Lusquiños, F.; Boutinguiza, M.; Quintero, F.; Pou, J.. "Production of aluminum foams by laser cladding". 2011.
  25. Boutinguiza, M.; Pou, J.; Lusquiños, F.; Comesaña, R.; Riveiro, A.. "Production of calcium phosphate nanoparticles by laser ablation in liquid". 2011.
    10.1016/j.phpro.2011.03.105
  26. Del Val, J.; Comesaña, R.; Lusquiños, F.; Quintero, F.; Riveiro, A.; Boutinguiza, M.; Pou, J.. "Laser-assisted manufacturing of bioactive glass implants for cranial defect restoration". 2011.
    10.2351/1.5062217
  27. Del Val, J.; Riveiro, A.; Comesaña, R.; Lusquiños, F.; Boutinguiza, M.; Quintero, F.; Pou, J.. "Production of aluminum foams by laser cladding". 2011.
    10.2351/1.5062218
  28. Quintero, F.; Riveiro, A.; Lusquiños, F.; Comesaña, R.; Pou, J.. "Laser cutting of phenolic resin panels: Identification of potential hazards". 2010.
  29. Riveiro, A.; Quintero, F.; Lusquiños, F.; Boutinguiza, M.; Comesaña, R.; Pou, J.. "Relationships between the melt dynamics and cut finishing in laser cutting". 2010.
  30. Del Val, J.; Comesaña, R.; Lusquiños, F.; Riveiro, A.; Quintero, F.; Pou, J.. "Production of micro-scale coatings by novel laser micro-cladding technique (invited presentation)". 2010.
  31. Del Val, J.; Comesaña, R.; Lusquiños, F.; Riveiro, A.; Quintero, F.; Pou, J.. "Laser micro-cladding: A novel laser additive technique to produce hard micro-coatings". 2010.
    10.2351/1.5062120
  32. Quintero, F.; Riveiro, A.; Lusquiños, F.; Comesaña, R.; Pou, J.. "Laser cutting of phenolic resin panels: Identification of potential hazards". 2010.
    10.2351/1.5062049
  33. Riveiro, A.; Quintero, F.; Lusquiños, F.; Boutinguiza, M.; Comesaña, R.; Pou, J.. "Relationships between the melt dynamics and cut finishing in laser cutting". 2010.
    10.2351/1.5062034
  34. Riveiro, A.; Quintero, F.; Comesaña, R.; Del Val, J.; Boutinguiza, M.; Lusquiños, F.; Pou, J.. "The influence of the assist gas flow regime on the laser cutting of aeronautic aluminium alloys". 2010.
    10.2351/1.5057243
  35. Riveiro, A.; Conde, J. C.; Lusquinos, F.. "DIMENSIONAL ANAYLIS FOR UNDERGRADUATE STUDENTS USING EDUCATIONAL SOFTWARE". 2010.
  36. Lusquinos, F.; Riveiro, A.; Conde, J. C.. "RECOVERING THE CONCEPT OF ENERGY FROM TWO PROMINENTS PHYSICISTS: LD LANDAU AND J. BERNUOULLI". 2010.
  37. Riveiro, A.; Conde, J. C.; Lusquinos, F.. "THE CONCEPT OF RELATIVE MOTION FROM A SIMPLE EXPERIMENTAL APPROACH". 2010.
  38. Conde, J. C.; Riveiro, A.; Lusquinos, F.. "NUMERICAL SOLUTION OF A CLASSIC PROBLEM OF PHYSICS: HEAT TRANSFER BY CONDUCTION". 2010.
  39. Quintero, F.; Dieste, O.; Pou, J.; Lusquiños, F.; Riveiro, A.. "Experimental and theoretical study on the synthesis of nanofibers by laser spinning". 2009.
  40. Comesaña, R.; Lusquiños, F.; Del Val, J.; Malot, T.; Riveiro, A.; Quintero, F.; Boutinguiza, M.; PAubry; Pou, J.. "Laser-assisted processing of 3D bioceramic structures". 2009.
  41. Riveiro, A.; Quintero, F.; Comesaña, R.; Del Val, J.; Boutinguiza, M.; Lusquiños, F.; Pou, J.. "Effects of internal design geometry in de Laval nozzles for off-axis assist gas injection on inert-gas laser cutting performance". 2009.
  42. Comesaña, R.; Lusquiños, F.; Del Val, J.; Malot, T.; Riveiro, A.; Quintero, F.; Boutinguiza, M.; PAubry; Pou, J.. "Laser-assisted processing of 3D bioceramic structures". 2009.
    10.2351/1.5061452
  43. Riveiro, A.; Quintero, F.; Comesaña, R.; Del Val, J.; Boutinguiza, M.; Lusquiños, F.; Pou, J.. "Effects of internal design geometry in de laval nozzles for off-axis assist gas injection on inert-gas laser cutting performance". 2009.
    10.2351/1.5061566
  44. Quintero, F.; Dieste, O.; Pou, J.; Lusquiños, F.; Riveiro, A.. "Experimental and theoretical study on the synthesis of nanofibers by laser spinning". 2009.
    10.2351/1.5061504
  45. Comesaña, R.; Lusquiños, F.; Del Val, J.; Ventosinos, V.; Vázquez, R.; Riveiro, A.; Quintero, F.; Santísima-Trinidad, H.; Pou, J.. "Laser-assisted production of electrical discharge machining (EDM) electrodes: A comparative study between rapid prototyping by selective laser sintering and laser surface cladding techniques". 2008.
  46. Pou, J.; Riveiro, A.; Quintero, F.; Lusquiños, F.; Comesaña, R.. "Applications of a novel supersonic laser cutting head". 2008.
  47. Riveiro, A.; Lusquiños, F.; Comesaña, R.; Quintero, F.; Pou, J.. "Obtaining thermal damping metallic porous coating on ceramics by means of supersonic laser spray technique". 2008.
  48. Lusquiños, F.; Comesaña, F.; Boutinguiza, M.; Riveiro, A.; Pou, J.. "Laser-assisted production of bioceramic coatings from marine wastes". 2008.
  49. Riveiro, A.; Quintero, F.; Lusquiños, F.; Pou, J.; Salminen, A.; Kujanpaa, V.. "Influence of assist gas in fibre laser cutting of aluminum-copper alloy". 2008.
  50. "Laser-assisted production of bioceramic coatings from marine wastes". 2008.
    10.2351/1.5057011
  51. Pou, J.; Riveiro, A.; Quintero, F.; Lusquiños, F.; Comesaña, R.. "Applications of a novel supersonic laser cutting head". 2008.
    10.2351/1.5057000
  52. Pou, J.; Lusquiños, F.; Quintero, F.; Riveiro, A.; Comesaña, R.; Boutinguiza, M.; León, B.; Pérez-Amor, M.. "Laser processing and synthesis of ceramic biomaterials for osseointegrable applications". 2007.
  53. Lusquiños, F.; Comesaña, R.; Riveiro, A.; Quintero, F.; Pou, J.. "Parametric investigation of microcladding by fibre laser of stellite on stainless steel". 2007.
  54. Riveiro, A.; Gómez, B.; Quintero, F.; Lusquiños, F.; Comesaña, R.; Pou, J.. "Parametric study on CO2 laser cutting of carbon fibre reinforced plastic composite". 2007.
  55. A. Riveiro; Antonio Riveiro Rodriguez; B. Gómez; F. Quintero; F. Lusquiños; R. Comesaña; Juan Pou. "Parametric study on CO2 laser cutting of carbon fibre reinforced plastic composite". 2007.
    10.2351/1.5061007
  56. Pou, J.; Lusquiños, F.; Quintero, F.; Riveiro, A.; Comesaña, R.; Boutinguiza, M.; León, B.; Pérez-Amor, M.. "Laser processing and synthesis of ceramic biomaterials for osseointegrable applications". 2007.
    10.2351/1.5061069
  57. Lusquiños, F.; Comesaña, R.; Riveiro, A.; Quintero, F.; Pou, J.. "Parametric investigation of microcladding by fibre laser of stellite on stainless steel". 2007.
    10.2351/1.5061056
  58. Lusquiños, F.; Comesaña, R.; Riveiro, A.; Quintero, F.; Del Val, J.; Pou, J.. "Rapid fabrication of electrical discharge machining (EDM) electrodes by laser surface cladding". 2007.
    10.2351/1.5061204
  59. Riveiro, A.; Boutinguiza, M.; Soto, R.; Lusquiños, F.; Quintero, F.; Pou, J.; Pérez-Amor, M.. "Laser cutting of natural stone slabs". 2006.
  60. Riveiro, A.; Pou, J.; Lusquiños, F.; Boutinguiza, M.; Quintero, F.; Soto, R.; Comesaña, R.; Pérez-Amor, M.. "Laser cutting of 2024-T3 aeronautic aluminium alloy". 2006.
  61. Quintero, F.; Pou, J.; Lusquiños, F.; Riveiro, A.; Mann, A.B.. "Production of biofibers by laser spinning". 2006.
  62. Lusquiños, F.; Comesaña, R.; Riveiro, A.; Quintero, F.; Pou, J.. "Laser cladding from marine wastes for biomedical applications". 2006.
  63. Riveiro, A.; Boutinguiza, M.; Soto, R.; Lusquiños, F.; Quintero, F.; Pou, J.; Pérez-Amor, M.. "Laser cutting of natural stone slabs". 2006.
    10.2351/1.5060948
  64. Riveiro, A.; Pou, J.; Lusquiños, F.; Boutinguiza, M.; Quintero, F.; Soto, R.; Comesaña, R.; Pérez-Amor, M.. "Laser cutting of 2024-T3 aeronautic aluminium alloy". 2006.
    10.2351/1.5060829
  65. Lusquiños, F.; Comesaña, R.; Riveiro, A.; Quintero, F.; Pou, J.. "Laser cladding from marine wastes for biomedical applications". 2006.
    10.2351/1.5060949
  66. Quintero, F.; Pou, J.; Lusquiños, F.; Riveiro, A.; Mann, A.B.. "Production of biofibers by laser spinning". 2006.
    10.2351/1.5060772
  67. Soto, R.; Boutinguiza, M.; Riveiro, A.; Lusquiños, F.; Quintero, F.; Pou, J.; Pérez-Amor, M.. "Laser drilling of natural granite plates". 2005.
    10.2351/1.5060424
  68. Soto, R.; Boutinguiza, M.; Riveiro, A.; Lusquiños, F.; Quintero, F.; Pou, J.; Pérez-Amor, M.. "Laser drilling of natural granite plates". 2005.
Journal article
  1. G.V. Martins; A. Riveiro; S. Chiussi; M.G.F. Sales. "Flexible sensing devices integrating molecularly-imprinted polymers for the detection of 3-nitrotyrosine biomarker". Biosensors and Bioelectronics: X (2022): 100107-100107. https://doi.org/10.1016/j.biosx.2022.100107.
    10.1016/j.biosx.2022.100107
  2. Pablo Pou-Álvarez; Antonio Riveiro; Xosé Ramón Nóvoa; Xueze Jin; Jesús del Val; Rafael Comesaña; Mohamed Boutinguiza; et al. "Laser-Guided Corrosion Control: A New Approach to Tailor the Degradation of Mg-Alloys". Small (2021): 2100924-2100924. https://doi.org/10.1002/smll.202100924.
    10.1002/smll.202100924
  3. Daniel Wallerstein; Antti Salminen; Fernando Lusquiños; Rafael Comesaña; Jesús del Val García; Antonio Riveiro Rodríguez; Aida Badaoui; Juan Pou. "Recent Developments in Laser Welding of Aluminum Alloys to Steel". Metals 11 4 (2021): 622-622. https://doi.org/10.3390/met11040622.
    10.3390/met11040622
  4. "Advanced characterization of intermetallic compounds in dissimilar aluminum-steel joints obtained by laser welding-brazing with Al-Si filler metals". (2021): https://publons.com/publon/50105613/.
  5. Pou-Alvarez, P.; Riveiro, A.; Novoa, X. R.; Fernandez-Arias, M.; del Val, J.; Comesana, R.; Boutinguiza, M.; Lusquinos, F.; Pou, J.. "Nanosecond, picosecond and femtosecond laser surface treatment of magnesium alloy: role of pulse length". Surface and Coatings Technology (2021): https://publons.com/publon/49044628/.
    10.1016/J.SURFCOAT.2021.127802
  6. Riveiro, Antonio; Amorim, Sara; Solanki, Anu; Costa, Diana S.; Pires, Ricardo A.; Quintero, Felix; del Val, Jesus; et al. "Hyaluronic acid hydrogels reinforced with laser spun bioactive glass micro- and nanofibres doped with lithium". Materials Science and Engineering: C (2021): https://publons.com/publon/45390621/.
    10.1016/J.MSEC.2021.112124
  7. Wallerstein, D.; Lusquinos, F.; Comesana, R.; del Val, J.; Riveiro, A.; Badaoui, A.; Pou, J.. "Dissimilar unbeveled butt joints of AA6061 to S235 structural steel by means of standard single beam fiber laser welding-brazing". Journal of Materials Processing Technology (2021): https://publons.com/publon/32429722/.
    10.1016/J.JMATPROTEC.2020.116994
  8. "Additive Manufacturing". Additive Manufacturing (2021): https://publons.com/publon/47691375/.
    10.1016/C2018-0-00910-X
  9. Raymond, Yago; Thorel, Emilie; Liversain, Margaux; Riveiro, Antonio; Pou, Juan; Ginebra, Maria-Pau. "3D printing non-cylindrical strands: Morphological and structural implications". Additive Manufacturing (2021): https://publons.com/publon/35510437/.
    10.1016/J.ADDMA.2021.102129
  10. Daniel Wallerstein; Eugenio Luis Solla; Fernando Lusquiños; Rafael Comesaña; Jesús del Val; Antonio Riveiro; Juan Pou. "Advanced characterization of intermetallic compounds in dissimilar aluminum-steel joints obtained by laser welding-brazing with Al Si filler metals". Materials Characterization (2021): https://publons.com/publon/48778581/.
    10.1016/J.MATCHAR.2021.111345
  11. Óscar Barro; Felipe Arias-González; Fernando Lusquiños; Rafael Comesaña; Jesús del Val; Antonio Riveiro; Aida Badaoui; Félix Gómez-Baño; Juan Pou. "Improved Commercially Pure Titanium Obtained by Laser Directed Energy Deposition for Dental Prosthetic Applications". Metals 11 1 (2020): 70-70. https://doi.org/10.3390/met11010070.
    10.3390/met11010070
  12. Óscar Barro; Felipe Arias-González; Fernando Lusquiños; Rafael Comesaña; Jesús del Val; Antonio Riveiro; Aida Badaoui; Félix Gómez-Baño; Juan Pou. "Effect of Four Manufacturing Techniques (Casting, Laser Directed Energy Deposition, Milling and Selective Laser Melting) on Microstructural, Mechanical and Electrochemical Properties of Co-Cr Dental Alloys, Before and After PFM Firing Process". Metals (2020): https://doi.org/10.3390/met10101291.
    10.3390/met10101291
  13. A. Riveiro; T. Abalde; P. Pou; R. Soto; J. del Val; R. Comesaña; A. Badaoui; M. Boutinguiza; J. Pou. "Influence of laser texturing on the wettability of PTFE". Applied Surface Science (2020): https://doi.org/10.1016/j.apsusc.2020.145984.
    10.1016/j.apsusc.2020.145984
  14. Mónica Fernández-Arias; Mohamed Boutinguiza; Jesús del Val; Antonio Riveiro; Daniel Rodríguez; Felipe Arias-González; Javier Gil; Juan Pou. "Fabrication and Deposition of Copper and Copper Oxide Nanoparticles by Laser Ablation in Open Air". Nanomaterials 10 2 (2020): 300-300. https://doi.org/10.3390/nano10020300.
    10.3390/nano10020300
  15. F. Quintero; J. Penide; A. Riveiro; J. del Val; R. Comesaña; F. Lusquiños; J. Pou. "Continuous fiberizing by laser melting (Cofiblas): Production of highly flexible glass nanofibers with effectively unlimited length". Science Advances (2020): https://doi.org/10.1126/sciadv.aax7210.
    10.1126/sciadv.aax7210
  16. Luis Thenier-Villa, Jose; Riveiro Rodriguez, Antonio; Miguel Gonzalez-Vargas, Pedro; Maria Martinez-Rolan, Rosa; Gelabert-Gonzalez, Miguel; Badaoui Fernandez, Aida; Pou, Juan; Conde Alonso, Cesareo. "Effects of external ventricular drainage decompression of intracranial hypertension on rebleeding of brain aneurysms: A fluid structure interaction study". Interdisciplinary Neurosurgery: Advanced Techniques and Case Management (2020): https://publons.com/publon/27272012/.
    10.1016/J.INAT.2019.100613
  17. A. Riveiro; P. Pou; J. del Val; R. Comesaña; F. Arias-González; F. Lusquiños; M. Boutinguiza; et al. "Laser texturing to control the wettability of materials". Procedia CIRP (2020): https://publons.com/publon/34427642/.
    10.1016/J.PROCIR.2020.09.065
  18. M. Fernández-Arias; M. Boutinguiza; J. Del Val; C. Covarrubias; F. Bastias; L. Gómez; M. Maureira; et al. "Copper nanoparticles obtained by laser ablation in liquids as bactericidal agent for dental applications". Applied Surface Science (2019): 145032-145032. https://doi.org/10.1016/j.apsusc.2019.145032.
    10.1016/j.apsusc.2019.145032
  19. Joaquín Penide Durán; Jesús del Val; Antonio Riveiro Rodriguez; Ramón Soto; Rafael Comesaña; Felix Quintero; Mohamed Boutinguiza; Fernando Lusquiños; Juan Pou. "Laser Surface Blasting of Granite Stones Using a Laser Scanning System". Coatings (2019): https://www.mdpi.com/2079-6412/9/2/131.
    10.3390/coatings9020131
  20. Antonio Riveiro Rodriguez; Felix Quintero; Mohamed Boutinguiza; Jesús del Val; Rafael Comesaña; Fernando Lusquiños; Juan Pou. "Laser Cutting: A Review on the Influence of Assist Gas". Materials (2019): http://www.mdpi.com/1996-1944/12/1/157.
    10.3390/ma12010157
  21. Joaquín Penide Durán; Antonio Riveiro Rodriguez; Ramón Soto; Mohamed Boutinguiza; Felipe Arias-González; Jesús del Val; Rafael Comesaña; et al. "Laser Microdrilling of Slate Tiles". Materials (2019): http://www.mdpi.com/1996-1944/12/3/398.
    10.3390/ma12030398
  22. Fernández-Arias, M.; Zimbone, M.; Boutinguiza, M.; Val, J.D.; Riveiro, A.; Privitera, V.; Grimaldi, M.G.; Pou, J.. "Synthesis and deposition of Ag nanoparticles by combining laser ablation and electrophoretic deposition techniques". Coatings 9 9 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85072209787&partnerID=MN8TOARS.
    10.3390/coatings9090571
  23. Comesaña, R.; Riveiro, A.; del Val, J.; Badaoui, A.; Penide, J.; Quintero, F.; Boutinguiza, M.; Lusquiños, F.; Pou, J.. "Laser surface modification of structural glass for anti-slip applications". Ceramics International (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85071284334&partnerID=MN8TOARS.
    10.1016/j.ceramint.2019.08.213
  24. Thenier-Villa, J.L.; Riveiro Rodríguez, A.; Martínez-Rolán, R.M.; Gelabert-González, M.; González-Vargas, P.M.; Calero-Félix, L.; Galarraga Campoverde, R.A.; et al. "A1 asynchrony, a potential risk factor for the rupture of anterior communicating artery aneurysms: A computational fluid dynamics study,Asincronía de A1, un factor de riesgo potencial para la rotura de aneurismas de la arteria comunicante anterior: un estudio de dinámica de fluidos computacional". Neurocirugia (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85066287653&partnerID=MN8TOARS.
    10.1016/j.neucir.2019.04.002
  25. P. Pou; J. del Val; A. Riveiro; R. Comesaña; F. Arias-González; F. Lusquiños; M. Bountinguiza; F. Quintero; J. Pou. "Laser texturing of stainless steel under different processing atmospheres: From superhydrophilic to superhydrophobic surfaces". Applied Surface Science (2018): https://doi.org/10.1016/j.apsusc.2018.12.248.
    10.1016/j.apsusc.2018.12.248
  26. M. Fernández-Arias; M. Boutinguiza; J. del Val; E. Medina; D. Rodríguez; A. Riveiro; R. Comesaña; et al. "RE-irradiation of silver nanoparticles obtained by laser ablation in water and assessment of their antibacterial effect". Applied Surface Science (2018): https://doi.org/10.1016/j.apsusc.2018.12.182.
    10.1016/j.apsusc.2018.12.182
  27. Jesús del Val; Rafael Comesaña; Antonio Riveiro; Fernando Lusquiños; Félix Quintero; Mohamed Boutinguiza; Juan Pou. "Laser direct writing of Co-superalloy lines for micro-fabrication applications". Surface and Coatings Technology 345 (2018): 76-88. https://doi.org/10.1016/j.surfcoat.2018.03.089.
    10.1016/j.surfcoat.2018.03.089
  28. Riveiro, A.; Quintero, F.; Val, J.D.; Boutinguiza, M.; Comesaña, R.; Lusquiños, F.; Pou, J.. "Laser cutting using off-axial supersonic rectangular nozzles". Precision Engineering 51 (2018): 78-87. http://www.scopus.com/inward/record.url?eid=2-s2.0-85026553420&partnerID=MN8TOARS.
    10.1016/j.precisioneng.2017.07.013
  29. Riveiro, A.; Maçon, A.L.B.; del Val, J.; Comesaña, R.; Pou, J.. "Laser surface texturing of polymers for biomedical applications". Frontiers in Physics 5 FEB (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85042723811&partnerID=MN8TOARS.
    10.3389/fphy.2018.00016
  30. Arias-González, F.; del Val, J.; Comesaña, R.; Penide, J.; Lusquiños, F.; Quintero, F.; Riveiro, A.; et al. "Microstructure and crystallographic texture of pure titanium parts generated by laser additive manufacturing". Metals and Materials International 24 1 (2018): 231-239. http://www.scopus.com/inward/record.url?eid=2-s2.0-85040130495&partnerID=MN8TOARS.
    10.1007/s12540-017-7094-x
  31. Thenier-Villa, J.L.; Riveiro Rodríguez, A.; Martínez-Rolán, R.M.; Gelabert-González, M.; González-Vargas, P.M.; Galarraga Campoverde, R.A.; Díaz Molina, J.; et al. "Hemodynamic Changes in the Treatment of Multiple Intracranial Aneurysms: A Computational Fluid Dynamics Study". World Neurosurgery 118 (2018): e631-e638. http://www.scopus.com/inward/record.url?eid=2-s2.0-85050794047&partnerID=MN8TOARS.
    10.1016/j.wneu.2018.07.009
  32. Arias-González, F.; del Val, J.; Comesaña, R.; Penide, J.; Lusquiños, F.; Quintero, F.; Riveiro, A.; Boutinguiza, M.; Pou, J.. "Production of phosphor bronze coatings by laser cladding". Procedia Manufacturing 13 (2017): 177-182. http://www.scopus.com/inward/record.url?eid=2-s2.0-85030864492&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.09.031
  33. Pou, P.; Riveiro, A.; del Val, J.; Comesaña, R.; Penide, J.; Arias-González, F.; Soto, R.; Lusquiños, F.; Pou, J.. "Laser surface texturing of Titanium for bioengineering applications". Procedia Manufacturing 13 (2017): 694-701. http://www.scopus.com/inward/record.url?eid=2-s2.0-85030842072&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.09.102
  34. Chantada, A.; Penide, J.; Pou, P.; Riveiro, A.; del Val, J.; Quintero, F.; Soto, R.; Lusquiños, F.; Pou, J.. "Laser surface texturing of granite". Procedia Manufacturing 13 (2017): 687-693. http://www.scopus.com/inward/record.url?eid=2-s2.0-85030845850&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.09.144
  35. del Val, J.; Arias-González, F.; Barro, O.; Riveiro, A.; Comesaña, R.; Penide, J.; Lusquiños, F.; et al. "Functionally graded 3D structures produced by laser cladding". Procedia Manufacturing 13 (2017): 169-176. http://www.scopus.com/inward/record.url?eid=2-s2.0-85030839387&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.09.029
  36. Riveiro, A.; Quintero, F.; del Val, J.; Boutinguiza, M.; Wallerstein, D.; Comesaña, R.; Lusquiños, F.; Pou, J.. "Laser cutting of aluminum alloy Al-2024-T3". Procedia Manufacturing 13 (2017): 396-401. http://www.scopus.com/inward/record.url?eid=2-s2.0-85030851873&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.09.028
  37. Riveiro, A.; Quintero, F.; Lusquiños, F.; del Val, J.; Comesaña, R.; Boutinguiza, M.; Pou, J.. "Laser cutting of Carbon Fiber Composite materials". Procedia Manufacturing 13 (2017): 388-395. http://www.scopus.com/inward/record.url?eid=2-s2.0-85030873651&partnerID=MN8TOARS.
    10.1016/j.promfg.2017.09.026
  38. Arias-González, F.; del Val, J.; Comesaña, R.; Penide, J.; Lusquiños, F.; Quintero, F.; Riveiro, A.; Boutinguiza, M.; Pou, J.. "Laser cladding of phosphor bronze". Surface and Coatings Technology 313 (2017): 248-254. http://www.scopus.com/inward/record.url?eid=2-s2.0-85011260698&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2017.01.097
  39. Chantada, A.; Penide, J.; Riveiro, A.; del Val, J.; Quintero, F.; Meixus, M.; Soto, R.; Lusquiños, F.; Pou, J.. "Increasing the hydrophobicity degree of stonework by means of laser surface texturing: An application on Zimbabwe black granites". Applied Surface Science 418 (2017): 463-471. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009471351&partnerID=MN8TOARS.
    10.1016/j.apsusc.2016.12.196
  40. García, V.J.; López-Cancelos, R.; Riveiro, A.; Comesaña, R.; Ustrell i Torrent, J.M.; Kasem, K.; Badaoui, A.; Manzanares-Céspedes, M.ªC.; Carvalho-Lobato, P.. "Determination of forces on a split palatal screw after rapid maxillary expansion,Bestimmung der auf eine palatinale Dehnschraube einwirkenden Kräfte bei forcierter Gaumenexpansion". Journal of Orofacial Orthopedics 78 5 (2017): 371-384. http://www.scopus.com/inward/record.url?eid=2-s2.0-85017468643&partnerID=MN8TOARS.
    10.1007/s00056-017-0091-3
  41. A. Riveiro; R. Soto; J. del Val; R. Comesaña; M. Boutinguiza; F. Quintero; F. Lusquiños; J. Pou. "Texturing of polypropylene (PP) with nanosecond lasers". Applied Surface Science 374 (2016): 379-386. https://doi.org/10.1016/j.apsusc.2016.01.206.
    10.1016/j.apsusc.2016.01.206
  42. Arias-González, F.; Del Val, J.; Comesaña, R.; Penide, J.; Lusquiños, F.; Quintero, F.; Riveiro, A.; Boutinguiza, M.; Pou, J.. "Fiber laser cladding of nickel-based alloy on cast iron". Applied Surface Science 374 (2016): 197-205. http://www.scopus.com/inward/record.url?eid=2-s2.0-84965174525&partnerID=MN8TOARS.
    10.1016/j.apsusc.2015.11.023
  43. Greasley, S.L.; Page, S.J.; Sirovica, S.; Chen, S.; Martin, R.A.; Riveiro, A.; Hanna, J.V.; Porter, A.E.; Jones, J.R.. "Controlling particle size in the Stöber process and incorporation of calcium". Journal of Colloid and Interface Science 469 (2016): 213-223. http://www.scopus.com/inward/record.url?eid=2-s2.0-84957955446&partnerID=MN8TOARS.
    10.1016/j.jcis.2016.01.065
  44. Riveiro, A.; Mejías, A.; Soto, R.; Quintero, F.; Del Val, J.; Boutinguiza, M.; Lusquiños, F.; Pardo, J.; Pou, J.. "CO2 laser cutting of natural granite". Optics and Laser Technology 76 (2016): 19-28. http://www.scopus.com/inward/record.url?eid=2-s2.0-84938896037&partnerID=MN8TOARS.
    10.1016/j.optlastec.2015.07.018
  45. Del Val, J.; López-Cancelos, R.; Riveiro, A.; Badaoui, A.; Lusquiños, F.; Quintero, F.; Comesaña, R.; Boutinguiza, M.; Pou, J.. "On the fabrication of bioactive glass implants for bone regeneration by laser assisted rapid prototyping based on laser cladding". Ceramics International 42 1 (2016): 2021-2035. http://www.scopus.com/inward/record.url?eid=2-s2.0-84946593581&partnerID=MN8TOARS.
    10.1016/j.ceramint.2015.10.009
  46. Boutinguiza, M.; Comesaña, R.; Lusquiños, F.; Riveiro, A.; Del Val, J.; Pou, J.. "Production of silver nanoparticles by laser ablation in open air". Applied Surface Science 336 (2015): 108-111. http://www.scopus.com/inward/record.url?eid=2-s2.0-84925359439&partnerID=MN8TOARS.
    10.1016/j.apsusc.2014.09.193
  47. Penide, J.; Quintero, F.; Riveiro, A.; Fernández, A.; Del Val, J.; Comesaña, R.; Lusquiños, F.; Pou, J.. "High contrast laser marking of alumina". Applied Surface Science 336 (2015): 118-128. http://www.scopus.com/inward/record.url?eid=2-s2.0-84925445319&partnerID=MN8TOARS.
    10.1016/j.apsusc.2014.10.004
  48. Comesaña, R.; Lusquiños, F.; Del Val, J.; Quintero, F.; Riveiro, A.; Boutinguiza, M.; Jones, J.R.; Hill, R.G.; Pou, J.. "Toward smart implant synthesis: Bonding bioceramics of different resorbability to match bone growth rates". Scientific Reports 5 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84934880846&partnerID=MN8TOARS.
    10.1038/srep10677
  49. Quintero, F.; Dieste, Ó.; Penide, J.; Lusquiños, F.; Riveiro, A.; Pou, J.. "Nonconventional production of glass nanofibers by laser spinning". Journal of the American Ceramic Society 97 10 (2014): 3116-3121. http://www.scopus.com/inward/record.url?eid=2-s2.0-84908066798&partnerID=MN8TOARS.
    10.1111/jace.13127
  50. Riveiro, A.; Soto, R.; Del Val, J.; Comesaña, R.; Boutinguiza, M.; Quintero, F.; Lusquiños, F.; Pou, J.. "Laser surface modification of ultra-high-molecular-weight polyethylene (UHMWPE) for biomedical applications". Applied Surface Science 302 (2014): 236-242. http://www.scopus.com/inward/record.url?eid=2-s2.0-84897458859&partnerID=MN8TOARS.
    10.1016/j.apsusc.2014.02.130
  51. Boutinguiza, M.; Comesaña, R.; Lusquiños, F.; Riveiro, A.; Del Val, J.; Pou, J.. "Palladium nanoparticles produced by CW and pulsed laser ablation in water". Applied Surface Science 302 (2014): 19-23. http://www.scopus.com/inward/record.url?eid=2-s2.0-84897454918&partnerID=MN8TOARS.
    10.1016/j.apsusc.2014.01.083
  52. Riveiro, A.; Mejías, A.; Lusquiños, F.; del Val, J.; Comesaña, R.; Pardo, J.; Pou, J.. "Laser cladding of aluminium on AISI 304 stainless steel with high-power diode lasers". Surface and Coatings Technology 253 (2014): 214-220. http://www.scopus.com/inward/record.url?eid=2-s2.0-84904760718&partnerID=MN8TOARS.
    10.1016/j.surfcoat.2014.05.039
  53. Penide, J.; Quintero, F.; Riveiro, A.; Sánchez-Castillo, A.; Comesaña, R.; del Val, J.; Lusquiños, F.; Pou, J.. "Removal of graffiti from quarry stone by high power diode laser". Optics and Lasers in Engineering 51 4 (2013): 364-370. http://dx.doi.org/10.1016/j.optlaseng.2012.12.002.
    10.1016/j.optlaseng.2012.12.002
  54. Riveiro, A.; Mejías, A.; Lusquiños, F.; del Val, J.; Comesaña, R.; Pardo, J.; Pou, J.. "Optimization of Laser Cladding for Al Coating Production". Physics Procedia 41 (2013): 327-334. http://dx.doi.org/10.1016/j.phpro.2013.03.085.
    10.1016/j.phpro.2013.03.085
  55. del Val, J.; Riveiro, A.; Comesana, R.; Cancelos, R. L.; Caamano, J. C.; Badaoui, A.. "LEARNING BASED ON ENGINEERING INTERDISCIPLINARY PROBLEMS: LASER ASSISTED MANUFACTURING AND STRESS ANALYSIS". EDULEARN16: 8TH INTERNATIONAL CONFERENCE ON EDUCATION AND NEW LEARNING TECHNOLOGIES (2013): https://publons.com/publon/14508113/.
  56. del Val, J.; Riveiro, A.; Cancelos, R. L.; Comesana, R.; Badaoui, A.; Caamano, J. C.. "ON STRESS ANALYSIS LEARNING: STRESS MEASUREMENTS BY LASER ASISSTED SPECTROSCOPIC TECHNIQUES". EDULEARN16: 8TH INTERNATIONAL CONFERENCE ON EDUCATION AND NEW LEARNING TECHNOLOGIES (2013): https://publons.com/publon/14508115/.
  57. Boutinguiza, M.; del Val, J.; Riveiro, A.; Lusquiños, F.; Quintero, F.; Comesaña, R.; Pou, J.. "Synthesis of Titanium Oxide Nanoparticles by Ytterbium Fiber Laser Ablation". Physics Procedia 41 (2013): 787-793. http://dx.doi.org/10.1016/j.phpro.2013.03.149.
    10.1016/j.phpro.2013.03.149
  58. Dieste, O.; Penide, J.; Quintero, F.; Riveiro, A.; Comesaña, R.; Lusquiños, F.; Pou, J.. "Glass Nanofibers from Fragile Melts Produced by Laser Spinning". Physics Procedia 41 (2013): 781-786. http://dx.doi.org/10.1016/j.phpro.2013.03.148.
    10.1016/j.phpro.2013.03.148
  59. Riveiro, A.; Soto, R.; Comesaña, R.; Boutinguiza, M.; del Val, J.; Quintero, F.; Lusquiños, F.; Pou, J.. "Laser surface modification of PEEK". Applied Surface Science 258 23 (2012): 9437-9442. http://dx.doi.org/10.1016/j.apsusc.2012.01.154.
    10.1016/j.apsusc.2012.01.154
  60. Riveiro, A.; Quintero, F.; Lusquiños, F.; del Val, J.; Comesaña, R.; Boutinguiza, M.; Pou, J.. "Experimental study on the CO2 laser cutting of carbon fiber reinforced plastic composite". Composites Part A: Applied Science and Manufacturing 43 8 (2012): 1400-1409. http://dx.doi.org/10.1016/j.compositesa.2012.02.012.
    10.1016/j.compositesa.2012.02.012
  61. Pou, J; Lusquinos, F; Quintero, F; Comesana, R; Riveiro, A; Boutinguiza, M.. "Laser in dentistry: expanding laser laboratory applications". Medicina Oral Patología Oral y Cirugia Bucal (2012): S131-.. http://dx.doi.org/10.4317/medoral.17643630.
    10.4317/medoral.17643630
  62. Comesaña-Campos, A.; Bouza-Rodríguez, J.B.; Riveiro-Rodríguez, A.; González-Piñeiro, L.. "Application of Design-for-Assembly to develop a new chassis for electrical cabinets,Aplicación del Design-for-Assembly en el desarrollo de un nuevo chasis para armarios de distribución eléctrica". Dyna (Spain) 87 2 (2012): 169-179. http://www.scopus.com/inward/record.url?eid=2-s2.0-84858195936&partnerID=MN8TOARS.
    10.6036/4323
  63. del Val, J.; Riveiro, A.; Comesana, R.; Badaoui, A.; Caamano, J. C.. "GOING BEYOND EYE LIMITS: FASTER OBSERVATION TO GAIN AN INSIGHT INTO FRACTURE MECHANICS". EDULEARN16: 8TH INTERNATIONAL CONFERENCE ON EDUCATION AND NEW LEARNING TECHNOLOGIES (2012): https://publons.com/publon/14508114/.
  64. del Val, J.; Riveiro, A.; Comesana, R.; L-Cancelos, R.; Caamano, J. C.; Badaoui, A.. "ACQUIRING TRANSVERSAL COMPETENCES THROUGH LEARNING BASED ON ENGINEERING INTERDISCIPLINARY PROBLEMS: ADVANCED MANUFACTURING AND STRESS ANALYSIS". EDULEARN16: 8TH INTERNATIONAL CONFERENCE ON EDUCATION AND NEW LEARNING TECHNOLOGIES (2012): https://publons.com/publon/14508116/.
  65. Riveiro, A; Quintero, F; Lusquiños, F; Comesaña, R; Pou, J. "Study of melt flow dynamics and influence on quality for CO 2 laser fusion cutting". Journal of Physics D: Applied Physics 44 13 (2011): 135501-135501. http://dx.doi.org/10.1088/0022-3727/44/13/135501.
    10.1088/0022-3727/44/13/135501
  66. Comesaña, R.; Lusquiños, F.; del Val, J.; López-Álvarez, M.; Quintero, F.; Riveiro, A.; Boutinguiza, M.; et al. "Three-dimensional bioactive glass implants fabricated by rapid prototyping based on CO2 laser cladding". Acta Biomaterialia 7 9 (2011): 3476-3487. http://dx.doi.org/10.1016/j.actbio.2011.05.023.
    10.1016/j.actbio.2011.05.023
  67. Comesaña, R.; Lusquiños, F.; del Val, J.; Malot, T.; López-Álvarez, M.; Riveiro, A.; Quintero, F.; et al. "Calcium phosphate grafts produced by rapid prototyping based on laser cladding". Journal of the European Ceramic Society 31 1-2 (2011): 29-41. http://dx.doi.org/10.1016/j.jeurceramsoc.2010.08.011.
    10.1016/j.jeurceramsoc.2010.08.011
  68. Quintero, F.; Riveiro, A.; Lusquiños, F.; Comesaña, R.; Pou, J.. "Feasibility Study on Laser Cutting of Phenolic Resin Boards". Physics Procedia 12 (2011): 578-583. http://dx.doi.org/10.1016/j.phpro.2011.03.073.
    10.1016/j.phpro.2011.03.073
  69. Quintero, F.; Riveiro, A.; Lusquiños, F.; Comesaña, R.; Pou, J.. "CO2 laser cutting of phenolic resin boards". Journal of Materials Processing Technology 211 11 (2011): 1710-1718. http://dx.doi.org/10.1016/j.jmatprotec.2011.05.014.
    10.1016/j.jmatprotec.2011.05.014
  70. Riveiro, A.; Quintero, F.; Lusquiños, F.; Comesaña, R.; del Val, J.; Pou, J.. "The Role of the Assist Gas Nature in Laser Cutting of Aluminum Alloys". Physics Procedia 12 (2011): 548-554. http://dx.doi.org/10.1016/j.phpro.2011.03.069.
    10.1016/j.phpro.2011.03.069
  71. Conde, J. C.; Riveiro, A.; Comesana, R.; Pou, J.. "Theoretical and experimental approach to the texturization process of bioreactive surfaces by high-power laser". Applied Physics A 105 2 (2011): 479-486. http://dx.doi.org/10.1007/s00339-011-6586-7.
    10.1007/s00339-011-6586-7
  72. Dieste, O.; Quintero, F.; Pou, J.; Lusquiños, F.; Riveiro, A.. "Influence of the working conditions on nanofiber diameters obtained by laser spinning". Applied Physics A 104 4 (2011): 1217-1222. http://dx.doi.org/10.1007/s00339-011-6415-z.
    10.1007/s00339-011-6415-z
  73. Riveiro, A.; Quintero, F.; Lusquiños, F.; Comesaña, R.; Pou, J.. "Effects of processing parameters on laser cutting of aluminium–copper alloys using off-axial supersonic nozzles". Applied Surface Science 257 12 (2011): 5393-5397. http://dx.doi.org/10.1016/j.apsusc.2010.11.061.
    10.1016/j.apsusc.2010.11.061
  74. Boutinguiza, M.; Pou, J.; Lusquiños, F.; Comesaña, R.; Riveiro, A.. "Laser-assisted production of tricalcium phosphate nanoparticles from biological and synthetic hydroxyapatite in aqueous medium". Applied Surface Science 257 12 (2011): 5195-5199. http://dx.doi.org/10.1016/j.apsusc.2010.12.004.
    10.1016/j.apsusc.2010.12.004
  75. Boutinguiza, Mohamed; Comesaña, Rafael; Lusquiños, Fernando; Riveiro, Antonio; Pou, Juan. "Production of nanoparticles from natural hydroxylapatite by laser ablation". Nanoscale Research Letters 6 1 (2011): 255-255. http://dx.doi.org/10.1186/1556-276X-6-255.
    10.1186/1556-276x-6-255
  76. del Val, J.; Comesana, R.; Riveiro, A.; Lusquinos, F.. "PHYSICS LAB: AN EXPOSITION OF UPDATING CONTENTS". EDULEARN16: 8TH INTERNATIONAL CONFERENCE ON EDUCATION AND NEW LEARNING TECHNOLOGIES (2011): https://publons.com/publon/14508117/.
  77. Comesana, R.; Riveiro, A.; del Val, J.. "FAST OPTICS IN INCOMPRESSIBLE FLOW MACHINERY LEARNING". EDULEARN16: 8TH INTERNATIONAL CONFERENCE ON EDUCATION AND NEW LEARNING TECHNOLOGIES (2011): https://publons.com/publon/14508119/.
  78. Conde Saa, J. C.; del Val Garcia, J.; Riveiro Rodriguez, A.; Lusquinos Rodriguez, F.. "AN ALTERNATIVE APPROACH TO TEACH HEAT CONDUCTION PROBLEMS". EDULEARN16: 8TH INTERNATIONAL CONFERENCE ON EDUCATION AND NEW LEARNING TECHNOLOGIES (2011): https://publons.com/publon/14508121/.
  79. del Val, J.; Comesaña, R.; Lusquiños, F.; Boutinguiza, M.; Riveiro, A.; Quintero, F.; Pou, J.. "Laser cladding of Co-based superalloy coatings: Comparative study between Nd:YAG laser and fibre laser". Surface and Coatings Technology 204 12-13 (2010): 1957-1961. http://dx.doi.org/10.1016/j.surfcoat.2009.11.036.
    10.1016/j.surfcoat.2009.11.036
  80. Riveiro, A.; Quintero, F.; Lusquiños, F.; Comesaña, R.; Pou, J.. "Parametric investigation of CO2 laser cutting of 2024-T3 alloy". Journal of Materials Processing Technology 210 9 (2010): 1138-1152. http://dx.doi.org/10.1016/j.jmatprotec.2010.02.024.
    10.1016/j.jmatprotec.2010.02.024
  81. Riveiro, A.; Quintero, F.; Lusquiños, F.; Comesaña, R.; Pou, J.. "Influence of assist gas nature on the surfaces obtained by laser cutting of Al–Cu alloys". Surface and Coatings Technology 205 7 (2010): 1878-1885. http://dx.doi.org/10.1016/j.surfcoat.2010.08.058.
    10.1016/j.surfcoat.2010.08.058
  82. Comesaña, R.; Lusquiños, F.; del Val, J.; Malot, T.; Riveiro, A.; Quintero, F.; Boutinguiza, M.; Aubry, P.; Pou, J.. "Three-dimensional laser-assisted processing of bioceramics". Physics Procedia 5 (2010): 193-201. http://dx.doi.org/10.1016/j.phpro.2010.08.137.
    10.1016/j.phpro.2010.08.137
  83. del Val, J.; Comesaña, R.; Lusquiños, F.; Riveiro, A.; Quintero, F.; Pou, J.. "Downscaling of conventional laser cladding technique to microengineering". Physics Procedia 5 (2010): 341-348. http://dx.doi.org/10.1016/j.phpro.2010.08.155.
    10.1016/j.phpro.2010.08.155
  84. "Nanofibers from Laser Spinning: Laser Spinning of Bioactive Glass Nanofibers (Adv. Funct. Mater. 19/2009)". (2009):
    10.1002/adfm.200990085
  85. Quintero, F; Dieste, O; Pou, J; Lusquiños, F; Riveiro, A. "On the conditions to produce micro- and nanofibres by laser spinning". Journal of Physics D: Applied Physics 42 6 (2009): 065501-065501. http://dx.doi.org/10.1088/0022-3727/42/6/065501.
    10.1088/0022-3727/42/6/065501
  86. "Laser Spinning of Bioactive Glass Nanofibers". (2009):
    10.1002/adfm.200801922
  87. Boutinguiza, M.; Lusquiños, F.; Riveiro, A.; Comesaña, R.; Pou, J.. "Hydroxylapatite nanoparticles obtained by fiber laser-induced fracture". Applied Surface Science 255 10 (2009): 5382-5385. http://dx.doi.org/10.1016/j.apsusc.2008.09.030.
    10.1016/j.apsusc.2008.09.030
  88. Lusquiños, F.; Comesaña, R.; Riveiro, A.; Quintero, F.; Pou, J.. "Fibre laser micro-cladding of Co-based alloys on stainless steel". Surface and Coatings Technology 203 14 (2009): 1933-1940. http://dx.doi.org/10.1016/j.surfcoat.2009.01.020.
    10.1016/j.surfcoat.2009.01.020
  89. Lusquiños, F.; Boutinguiza, M.; Comesaña, R.; Riveiro, A.; Quintero, F.; Pou, Juan. "Production of Calcium Phosphate Particles from Marine Wastes by Gas Jet Assisted Laser Heating". Materials Science Forum 587-588 (2008): 497-501. http://dx.doi.org/10.4028/www.scientific.net/MSF.587-588.497.
    10.4028/www.scientific.net/msf.587-588.497
  90. Riveiro, A.; Quintero, F.; Lusquin̿os, F.; Pou, J.; Pérez-Amor, M.. "Laser cutting of 2024-T3 aeronautic aluminum alloy". Journal of Laser Applications 20 4 (2008): 230-230. http://dx.doi.org/10.2351/1.2995769.
    10.2351/1.2995769
  91. Quintero, F.; Pou, J.; LusquinÌ¿os, F.; Riveiro, A.; Pérez-Amor, M.; Fernandes, A. J. S.. "Single-Pass and Multi-Pass Laser Cutting of Si–SiC: Assessment of the Cut Quality and Microstructure in the Heat Affected Zone". Journal of Laser Applications 19 3 (2007): 170-170. http://dx.doi.org/10.2351/1.2716007.
    10.2351/1.2716007
  92. Lusquiños, F.; Conde, J.C.; Bonss, S.; Riveiro, A.; Quintero, F.; Comesaña, R.; Pou, J.. "Theoretical and experimental analysis of high power diode laser (HPDL) hardening of AISI 1045 steel". Applied Surface Science 254 4 (2007): 948-954. http://dx.doi.org/10.1016/j.apsusc.2007.07.200.
    10.1016/j.apsusc.2007.07.200
  93. Riveiro, A.; Lusquiños, F.; Comesaña, R.; Quintero, F.; Pou, J.. "Supersonic laser spray of aluminium alloy on a ceramic substrate". Applied Surface Science 254 4 (2007): 926-929. http://www.scopus.com/inward/record.url?eid=2-s2.0-36248934656&partnerID=MN8TOARS.
    10.1016/j.apsusc.2007.07.201
  94. Quintero, F.; Mann, A. B.; Pou, J.; Lusquin̿os, F.; Riveiro, A.. "Rapid production of ultralong amorphous ceramic nanofibers by laser spinning". Applied Physics Letters 90 15 (2007): 153109-153109. http://dx.doi.org/10.1063/1.2722202.
    10.1063/1.2722202
  95. Boutinguiza, M.; Lusquiños, F.; Comesaña, R.; Riveiro, A.; Quintero, F.; Pou, J.. "Production of microscale particles from fish bone by gas flow assisted laser ablation". Applied Surface Science 254 4 (2007): 1264-1267. http://dx.doi.org/10.1016/j.apsusc.2007.08.015.
    10.1016/j.apsusc.2007.08.015
  96. Quintero, F.; Pou, J.; Lusquiños, F.; Riveiro, A.. "Experimental analysis of the production of micro- and nanofibres by Laser Spinning". Applied Surface Science 254 4 (2007): 1042-1047. http://dx.doi.org/10.1016/j.apsusc.2007.07.190.
    10.1016/j.apsusc.2007.07.190

Other

Other output
  1. Laser fusion cutting of difficult materials. Advances in laser materials processing. 2010. Riveiro, A.; Quintero, F.; Pou, J.. http://dx.doi.org/10.1533/9781845699819.2.43.
    10.1533/9781845699819.2.43
Activities

Consulting

Activity description Institution / Organization
2017/01/10 - 2018/10/01 Topic Editor of Research Topic "Laser processing of biomaterials" in journals Frontiers in Physics, Frontiers in Astronomy and Space Sciences, Frontiers in Materials, Frontiers in Bioengineering and Biotechnology , Frontiers in Molecular Biosciences Frontiers Media SA, Switzerland

Journal scientific committee

Journal title (ISSN) Publisher
2021/07/22 - Current Materials (1996-1944) MDPI AG
2018/09/26 - Current Metals (2075-4701) MDPI AG
2018/08/08 - Current Sci (2413-4155) MDPI AG
2018/05/01 - Current Ceramics (2571-6131) MDPI AG
2018/01/29 - Current PLOS ONE (1932-6203) PLOS
2016/11/29 - Current International Journal of Mechatronics and Applied Mechanics (25594397, 25596497) Cefin Publishing House
2015/01/25 - Current Frontiers in Materials; Frontiers in Physics (2296-8016; 2296-424X) Frontiers Media
2014/12/14 - Current Advances in Materials Science and Engineering (16878442, 16878434) Hindawi Publishing Corporation
2017/12/29 - 2028/09/01 Journal of Manufacturing and Materials Processing (2504-4494) MDPI AG
Distinctions

Award

2019 Programa de Retencion de Talento Investigador de la Universidad de Vigo
Universidade de Vigo, Spain
2019 Publons Peer Review Awards 2019. Top 1% of reviewers in Cross-Field
Publons (Clarivate Analytics), United States
2019 Publons Peer Review Awards 2019. Top 1% of reviewers in Materials Science
2019 Outstanding Reviewer Award winners for 2018, in recognition of the high quality and timeliness of reviews for Nanotechnology journal.
Institute of Physics (IOP), United Kingdom
2018 Publons Peer Review Awards 2018. Top 1% of reviewers in Materials Science
Publons (Clarivate Analytics), United States
2010 Premio Extraordinario de Doctorado
Universidade de Vigo, Spain
2006 2nd Place 8th ICALEO Student Paper Award Contest
Laser Institute of America, United States

Other distinction

2017 Plan Gallego de Investigacion, innovacion y crecimiento 2017 (Plan I2C) - Modalidad B (Ref.: ED481D-2017/010)
Xunta de Galicia, Spain
2014 Plan Gallego de Investigacion, innovacion y crecimiento 2011-2015 (Plan I2C) - Modalidad A (Ref.: POS-A/2013/161)
Xunta de Galicia, Spain
2010 Programa de ayudas a la movilidad del personal investigador
Universidade de Vigo, Spain
2009 Programa de ayudas a la movilidad del personal investigador
Universidade de Vigo, Spain