???global.info.a_carregar???
Antonio F. Miguel received the Ph.D. degree in Applied Physics from the Wageningen University (WU-R), the Netherlands, in 1998. He also earned his Habilitation in Mechatronics Engineering and Energy in 2021. Dr. Miguel is a research scientist at the Institute of Earth Sciences, the pole of Evora, Portugal and he heads the Complex Flow Systems Lab. He also currently holds an Associate Professor position with the School of Sciences and Technology at the University of Evora. From 2000 to 2008, he was a Visiting Professor at WU-R, the Netherlands, and a Visiting Fellow at the University of Reading, UK, from May to September of 2001. From 2013 to 2015 he was a Deputy Contact at the European Energy Research Alliance (EERA). Dr. Miguel is an associate editor and is on the editorial board of the several Scopus-indexed journals (Research on Engineering Structures and Materials; International Journal of Hydromechatronics; Frontiers in Physics; Case Studies in Thermal Engineering; Energies; Heliyon; International Journal of Exergy). He is the author of 3 books (by Springer in 2004 and 2018, and UNIL in 2006) and over 100 peer-referred articles. His research interests include a wide range of topics related to Interdisciplinary Physics, Fluid Dynamics and Thermodynamics of Complex Systems: complex flow systems (shape, structure and optimization; self-similar networks; porous media; pedestrian motion patterns), complex fluids (transport and deposition of aerosols), and biological and medical physics (biofluid dynamics, tracheobronchial tree, vascular tree). Dr. Miguel has received a number of paper awards, and he has been general cochair and special session chair, and served on advisory boards for multiple international conferences. Dr. Miguel has the distinction of being among the top 2 percent of most-prominent scientists worldwide (World's Top 2% Scientists list), in its field, according to a study coordinated by Stanford University (USA). He is featured in the two lists ranking presented: "Lifetime Scientific Influence Ranking" and "Annual Scientific Influence Ranking" for 2023, 2022, 2021, 2020 and 2019. (https://elsevier.digitalcommonsdata.com/datasets/btchxktzyw/7)
Read full resume ↓
Identification

Personal identification

Full name
Antonio Alberto Ferreira Miguel

Citation names

  • Antonio Ferreira Miguel
  • Antonio F. Miguel
  • A. F. Miguel
  • Antonio Miguel
  • A. A. F. Miguel

Author identifiers

Ciência ID
4E1A-F7EE-E6AD
ORCID iD
0000-0001-6287-2056
Google Scholar ID
https://scholar.google.com/citations?user=FwNcf8UAAAAJ&hl=en

Email addresses

  • afm@uevora.pt (Professional)
  • cfslab@gmx.pt (Professional)

Addresses

  • Institute of Earth Sciences (ICT), pole of University of Evora, Rua Romão Ramalho, 59, 7000-671, Évora, Évora, Portugal (Professional)
  • Complex Fluid System Lab (CFS Lab), ICT-UEvora, Apartado 94, 7002-554, Evora, Evora, Portugal (Professional)

Websites

Knowledge fields

  • Exact Sciences - Physical Sciences
Education
Degree Classification
2021/03
Concluded
 Mechatronics and Energy (Título de Agregado)
Universidade de Évora, Portugal
1994/11 - 1998/02
Concluded
 Applied Phyiscs / Física Aplicada (Doctor of Philosophy)
Major in Fluid Dynamics / Dinâmica de Fluidos
Wageningen Universiteit en Research, Netherlands
"Transport phenomena through porous screens and openings : from theory to practice" (THESIS/DISSERTATION)
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2003 - Current Associate Professor (University Teacher) Universidade de Évora Escola de Ciências e Tecnologia, Portugal
1998 - 2003 Assistant Professor (University Teacher) Universidade de Évora, Portugal

Others

Category
Host institution 		Employer
2014 - Current Research Scientist in R&D Unit Instituto de Ciências da Terra (ICT), Pólo de Évora, Portugal
1991 - 2014 Research Scientist in R&D Unit Centro de Geofísica de Évora, Portugal
2000 - 2008 Visiting Professor Wageningen Universiteit en Research, Netherlands
2001 - 2001 Visiting Fellow University of Reading - Construction Management and Engineering, United Kingdom
Projects

Contract

Designation Funders
2020/02 - Current ICT base & programmatic funding
UIDB/04683/2020 & UIDP/04683/2020
 Fundação para a Ciência e a Tecnologia
2022/07/20 - 2025/12/31 Mobilizing Agenda: New Space Portugal
C644936537-00000046
Researcher
2020/01/01 - 2023/12/31 INSTITUTO DE CIÊNCIAS DA TERRA
UIDB/04683/2020
10.54499/UIDB/04683/2020
Universidade do Minho, Portugal

Instituto de Ciências da Terra, Portugal

Universidade de Évora, Portugal

Universidade do Porto Faculdade de Ciências, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2020/01/01 - 2023/12/31 INSTITUTO DE CIÊNCIAS DA TERRA
UIDP/04683/2020
10.54499/UIDP/04683/2020
Universidade do Minho, Portugal

Instituto de Ciências da Terra, Portugal

Universidade de Évora, Portugal

Universidade do Porto Faculdade de Ciências, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2021/01/04 - 2023/06/06 Optimization of the automotive painting process by developing CFD and ANN numerical simulation models
POCI-01-0247-FEDER-072621
Researcher
2020 - 2023 Veículo inovador reutilizável para investigação e alavancagem de tecnologia orbita (VIRIATO)
POCI-01-0247-FEDER-046100
LISBOA-01-0247-FEDER-046100
Researcher
Ongoing
2019 - 2022 ALFR-Alentejo (Installation, testing and analysis of an Advanced Linear Fresnel Reflector concentrator for the production of electricity by means of solar thermal with thermal storage)
ALT20-03-0145-FEDER-039487
Researcher
European Union financial support & National/regional public financial support
Concluded
2018 - 2021 Design of passive micromixers for enhanced mixing performance for biomedical and environmental applications
IZTECH-TUBITAK
Other
IZTECH-TUBITAK
Concluded
2018/10 - 2020/09 Flow regime-dependent crude oil and water separation by porous tubes and permeability enhancement (CASPER)
ALT20-03-0145-FEDER-029624
Principal investigator
European Union financial support & National/regional public financial support
Concluded
2015 - 2018 Projetos de IC&DT
PEst-OE/CTE/UI0078/2014
 Ministério da Ciência Tecnologia e Ensino Superior
2014 - 2015 Projetos de IC&DT
COMPETE 2020 POCI-01-0145-FEDER-007690
 Ministério da Ciência Tecnologia e Ensino Superior
2011 - 2013 Projetos de IC&DT
PEst-OE/CTE/UI0078/2011
 Ministério da Ciência Tecnologia e Ensino Superior
2007 - 2009 Development of constructal flow architecture concepts for applications in Science and Technology
EME-MFE/71960/2006
Co-Principal Investigator (Co-PI)
Ministério da Ciência Tecnologia e Ensino Superior
Concluded
2005 - 2007 Dinâmica da agregação e da deposição de aerossóis (Dinossóis)
EME/59909/2004
Principal investigator
Ministério da Ciência Tecnologia e Ensino Superior
Concluded
2001 - 2003 Transporte e deposição de aerossóis no interior de cavidades
EME/33012/2000
Principal investigator
Ministério da Ciência Tecnologia e Ensino Superior
Concluded
1999 - 2001 Influência das características estruturais de filtros fibrosos na filtração de aerossóis
PRAXIS/P/EME/11304/1998
Principal investigator
Fundação para a Ciência e a Tecnologia
Concluded
1999 - 2001 Analysis of the state of stress of greenhouse plastic film under various loading conditions, Training Through Research of the SMT Programme (the Specific RTD Programme), Commission of the European Communities, Directorate General XII, Science, Research and Development
SMT4-CT98-9034 (DG 12-RSMT), EU-FUND
Researcher
European Commission
Concluded
1994 - 1997 Greenhouse design: functional and structural aspects and test methods of overing materials; A network project, HCM-R&D Programme, Commission of the European Communities
HCM-R&D Programme, Commission of the European Communities, Directorate General XII, Science, Research and Development, EU-FUND
Researcher
European Commission
Concluded
Outputs

Publications

Book
  1. Miguel, Antonio; L. A. O. Rocha. Tree-Shaped Fluid Flow and Heat Transfer. United States: Springer. 2018.
    10.1007/978-3-319-73260-2
  2. Bejan, Adrian; Lorente, S.; Miguel, A. F.; Reis, A.. Along with constructal theory. Switzerland: UNIL Press, Lausanne. 2006.
  3. Bejan, A.; Dincer, I.; Lorente, S.; Miguel, A. F.; Reis, A. H.. Porous and complex flow structures in modern technologies. United States: Springer. 2004.
    10.1007/978-1-4757-4221-3
  4. Miguel, Antonio F.. Transport Phenomena Through Porous Screens and Openings: from theory to practice. Wageningen, Netherlands: Ponsen &Looyen. 1998.
Book chapter
  1. Miguel, A.F.; Rocha, L.A.O.. "Tree-shaped flow networks in nature and engineered systems". 2018.
    10.1007/978-3-319-73260-2_1
  2. Miguel, A.F.; Rocha, L.A.O.. "Tree-Shaped Fluid Flow and Heat Transfer". 2018.
    10.1007/978-3-319-73260-2_2
  3. Miguel, A.F.; Rocha, L.A.O.. "The assembly of the fins and the shape of the body". 2018.
    10.1007/978-3-319-73260-2_5
  4. Miguel, A.F.; Rocha, L.A.O.. "Transport and deposition of particles in airway trees". 2018.
    10.1007/978-3-319-73260-2_3
  5. Miguel, A.F.; Rocha, L.A.O.. "Tree-shaped cavities". 2018.
    10.1007/978-3-319-73260-2_6
  6. Miguel, A.F.; Rocha, L.A.O.. "Constructal design of the assembly of fins". 2018.
    10.1007/978-3-319-73260-2_4
  7. Miguel, A.F.; Rocha, L.A.O.. "Tree-shaped high thermal conductivity pathways". 2018.
    10.1007/978-3-319-73260-2_7
  8. Miguel, Antonio F.. "Filtration Processes and Design of Filters". edited by J.M.P.Q. Delgado, 63-90. 2013.
    10.1007/978-3-642-37469-2_3
  9. Miguel, A. F.. "Toward a Quantitative Unifying Theory of Natural Design of Flow Systems: Emergence and Evolution". edited by Rocha, LAO; Lorente, S; Bejan, A, 21-39. 2013.
    10.1007/978-1-4614-5049-8_2
  10. Miguel, António F.. "Lungs as a natural porous media: architecture, airflow characteristics and transport of suspended particles". edited by J. Delgado, 115-137. 2012.
    10.1007/978-3-642-21966-5
  11. Miguel, A.F.. "Tree-shaped flow structures viewed from the constructal theory perspective". In Single and Two-Phase Flows on Chemical and Biomedical Engineering, 266-291. Bentham Books, 2012.
    10.2174/978160805295011201010266
  12. Miguel, Antonio F.. "The Principle that Generates Configuration in Animate and Inanimate Systems–a unified view". In Applied Physics in the 21st Century (Horizons in World Physics), 195-216. Nova Science Publishers, 2011.
  13. Antonio F. Miguel. "Computational Analysis of The Role of Permeability and Inertia on Fluid Flow Through Porous Media". In Current Trends in Chemical Engineering, 1-19. Studium Press LLC, 2010.
  14. Miguel, António F.. "Pattern formation and self-organization in living systems: a unified view for coral colonies and crowd dynamics". In Constructal Human Dynamics, Security and Sustainability, edited by A. Bejan et al., 61-83. Netherlands: IOS Press, 2009.
    10.3233/978-1-58603-959-2-61
  15. Miguel, Antonio. "Constructal Patterns Formation in Nature, Pedestrian Motion and Epidemics Propagation". United States, 2007.
    doi.org/10.1007/978-0-387-47681-0_5
  16. Miguel, Antonio F.; Reis, A.. "Suspension flow with deposition in lung airway bifurcations in different breathing conditions". In New Developments in Hazardous Materials Research, 17-29. United States: Nova Science Publishers, 2006.
  17. Bejan, Adrian; Lorente, S.; Miguel, Antonio F.; Reis, A.. "Constructal theory of distribution of city sizes". In “Advanced Engineering Thermodynamics” by A. Bejan, 3rd edition, 774-779. United States: John Wiley & Sons, 2006.
  18. Miguel, Antonio F.; Reis, A.. "Riscos tecnológicos e efeitos da atividade humana na saúde: poluição do ar". In Riscos Naturais e Tecnológicos e a sua Prevenção, 4.31-4.40. Portugal: CGE-UEvora, 2005.
  19. Adrian Bejan; Ibrahim Dincer; Sylvie Lorente; Antonio F. Miguel; A. Heitor Reis. "Multidisciplinary Applications". 2005.
    10.1007/978-1-4757-4221-3_8
  20. Adrian Bejan; Ibrahim Dincer; Sylvie Lorente; Antonio F. Miguel; A. Heitor Reis. "Environmental and Civil Engineering". 2005.
    10.1007/978-1-4757-4221-3_4
  21. Adrian Bejan; Ibrahim Dincer; Sylvie Lorente; Antonio F. Miguel; A. Heitor Reis. "Living Structures". 2005.
    10.1007/978-1-4757-4221-3_6
  22. Adrian Bejan; Ibrahim Dincer; Sylvie Lorente; Antonio F. Miguel; A. Heitor Reis. "Compact Heat Transfer Flow Structures". 2005.
    10.1007/978-1-4757-4221-3_5
  23. Adrian Bejan; Ibrahim Dincer; Sylvie Lorente; Antonio F. Miguel; A. Heitor Reis. "Drying of Porous Materials". 2005.
    10.1007/978-1-4757-4221-3_7
  24. Miguel, Antonio F.. "Porous Media and Filtration: developments and applications". In Emerging Technologies and Techniques in Porous Media, 419-431. Springer Netherlands, 2004.
  25. Adrian Bejan; Ibrahim Dincer; Sylvie Lorente; Antonio F. Miguel; A. Heitor Reis. "Energy Engineering". 2004.
    10.1007/978-1-4757-4221-3_3
  26. Miguel, Antonio F.. "Filtration and Filters: classical approaches and new developments". In Current Issues on Heat and Mass Transfer in Porous Media, 339-347. Ovidius University, 2003.
Conference paper
  1. Miguel, Antonio F.; Bharat Soni. "A critical reassessment of the Hess-Murray law under unsteady flow". Paper presented in 12th Conference on Dynamical Systems Applied to Biology and Natural Sciences, Virtual DSABNS, February 2-5, 2021, 2021.
  2. Miguel, Antonio F.; Vinicius R. Pepe; Flavia S. F. Zinani; L.A.O. Rocha. "Numerical study of Newtonian fluid in tree-shaped structures". Paper presented in 12th Conference on Dynamical Systems Applied to Biology and Natural Sciences, Virtual DSABNS, February 2-5, 2021, 2021.
  3. Miguel, Antonio F.; Sheng Chen; Murat Aydin; Eda Aydin. "Flow comparison of grafts with different sizes in bypass of an artery". Paper presented in 12th Conference on Dynamical Systems Applied to Biology and Natural Sciences, Virtual DSABNS, February 2-5, 2021, 2021.
  4. Pepe, V.R.; Rocha, L.A.O.; Zinani, F.S.F.; Miguel, Antonio F.. "Optimality to flow and design of double T-shape branching ducts with newtonian fluid and impermeable wall". Paper presented in Constructal Law Conference 2019, 2019.
  5. Pepe, V.R.; Rocha, L.A.O; Zinani, F.S.F.; Miguel, Antonio F.. "Otimização de design do duto ramificado em forma de T com escoamento de fluido newtoniano e paredes impermeáveis". Paper presented in 8ª Conferencia do Sul em Modelagem Computacional (MCSul), 2018.
  6. Pepe, V.R.; Sehn, A; Rocha, L.A.O.; Zinani, F.S.F.; Miguel, Antonio F.. "Optimality to flow and design of T shaped branching ducts". Paper presented in VIII Brazilian and International Conference on Rheology, 2018.
  7. Miguel, Antonio F.. "Brownian motion in duct of periodic varying radius: external driving force and particle mobility". Paper presented in 14th International Conference on Diffusion in Solids and Liquids, 2018.
  8. Sehn, A; Pepe, V.R.; Miguel, Antonio F.; Zinani, F.S.F.; Rocha, L.A.O. "Numerical study of non-Newtonian fluid flows in Y-shaped structures". Paper presented in XXXVIII Ibero-Latin American Congress on Computational Methods in Engineering, 2017.
  9. Pepe, V.R.; Rocha, L.A.O.; Miguel, Antonio F.. "Is it the Hess-Murray law always valid?". Paper presented in Constructal Law Conference 2017, 2017.
  10. Miguel, Antonio F.. "Emergence of design is physics: a constructal view of pedestrian dynamics, collective motion and synchronization". Paper presented in Constructal Law Conference 2013, 2013.
  11. Serrenho, Ana; Miguel, Antonio F.. "Fluid flow and aerosol transport in T-shaped 3D structures". Paper presented in 4th International Conference on Porous Media and its Applications in Science, Engineering and Industry, 2012.
    10.1063/1.4711148
  12. Serrenho, A.; Miguel, A.F.. "Fluid flow and aerosol transport in T-shaped 3D structures". 2011.
    10.1063/1.4711148
  13. Miguel, Antonio F.; Aydin, Murat. "Ocean energy: exergy analysis and conversion". Paper presented in Global Conference on Global Warming 2011, 2011.
  14. Miguel, Antonio F.. "Why systems are the way they are?". Paper presented in Constructal Law Conference 2011, 2011.
  15. Miguel, Antonio F.. "Energy and environment policies and road maps in the EU". Paper presented in World Universities Congress 2010, 2010.
  16. Mercimek, M; Yildirim, H; Miguel, Antonio F.; Aydin, M.. "Investigation of T-shape geometry for the collection of pollution particles". Paper presented in 2nd Global Conference on Global Warming, 2009.
  17. Miguel, Antonio F.. "Global warming and climate change". Paper presented in 2nd Global Conference on Global Warming, 2009.
  18. Miguel, Antonio F.. "Analytical approach to optimal dendritic structures for fluid flow". Paper presented in 4th International Conference on Applications of Porous Media, 2009.
  19. Miguel, Antonio F.; Silva, A.M.. "Solar irradiation in diffusely enclosures with partitions". Paper presented in 4th International Exergy, Energy and Environment Symposium, 2009.
  20. Miguel, Antonio F.; Reis, A.; Melgäo, M.. "Indoor-outdoor aerosol concentrations in two Portuguese cities". Paper presented in 1st the Global Conference on Global Warming, 2008.
  21. Miguel, Antonio F.. "CO2 emission to atmosphere and biological scaling laws". Paper presented in 1st the Global Conference on Global Warming, Istanbul, 2008.
  22. Serrenho, A.; Miguel, Antonio F.. "Contribuição para o estudo do escoamento de fluido em meios poroso". Paper presented in II Conferencia Nacional de Métodos Numéricos em Mecânica de Fluidos e Termodinâmica, 2008.
  23. Miguel, A.F.. "Constructal pattern formation in nature, pedestrian motion, and epidemics propagation". 2007.
  24. Miguel, A.F.; Canhoto, P.; Reis, A.H.. "Optimization of geometry and performance of cooling bundles of parallel tubes with pumping fluid requirements". 2007.
    10.1115/HT2007-32078
  25. Miguel, Antonio F.. "Constructal view of formation of dissimilar patterns inside similar living systems". Paper presented in 8th International Conference on Systems Biology (ICSB 2007), 2007.
  26. Serrenho, A.; Miguel, Antonio F.; Reis, A.. "Effect of temperature and humidity on the permeability of porous materials". Paper presented in 18th International Symposium on Transport Phenomena, 2007.
  27. Teixeira, R.; Miguel, Antonio F.. "Effect of acoustic fields on particle deposition in random fibrous porous materials". Paper presented in 18th International Symposium on Transport Phenomena, 2007.
  28. Reis, A.; Miguel, Antonio F.; Bejan, Adrian. "Constructal view of dendritic growth of airborne particles". Paper presented in European Aerosol Conference 2007, 2007.
  29. Serrenho, A.; Miguel, Antonio F.; Reis, A.. "Computational investigation of particle losses in random porous structures". Paper presented in European Aerosol Conference 2007, 2007.
  30. Reis, A.; Miguel, Antonio F.; Bejan, Adrian. "Configuration of air filters based on the constructal theory". Paper presented in European Aerosol Conference 2007, 2007.
  31. Canhoto, P.; Reis, A.; Miguel, Antonio F.. "Exergy analysis and optimisation of a ground or water source heat pump system for maximum environmental exergy potential utilization". Paper presented in 3rd International Energy, Exergy and Environment Symposium, 2007.
  32. Aydin, M.; Miguel, Antonio F.; Reis, A.. "Influence of flow with suspended particles on temperature fields and convective heat transfer". Paper presented in 3rd International Energy, Exergy and Environment Symposium, 2007.
  33. Melgäo, M.; Miguel, A.F.; Reis, A.H.. "Indoor suspended particulate matter in office rooms: An experimental study in Evora (Portugal)". 2006.
  34. Aydin, M; Miguel, Antonio F.; Reis, A.. "Coarse particle transport in a partitioned room". Paper presented in 2006 IASME Int. Conf. on Energy, Environment, Ecosystems & Sustainable Development, 2006.
  35. Miguel, Antonio F.; Reis, A.. "Suspension flow with deposition in tree-shaped structures". Paper presented in International Conference on Applications of Porous Media 2006, 2006.
  36. Kruz, S.; Pinela, J.; Reis, A.; Miguel, Antonio (4E1A-F7EE-E6AD); Aydin, M.. "Particle transport and deposition in porous structures: effects of particle properties, porosity and Reynolds number". Paper presented in 6th International Symposium on Transport Phenomena, 2005.
  37. Pinela, J.; Kruz, S.; Miguel, Antonio F.; Reis, A.; Aydin, M.. "Permeability-porosity relationship assessment by 2-D numerical simulations". Paper presented in 16th International Symposium on Transport Phenomena, 2005.
  38. Serrenho, Ana; Teixeira, R.; Reis, A.; Miguel, Antonio F.; Aydin, M. "Numerical simulation of suspension flow with deposition in 3D bifurcated tubes". Paper presented in 16th International Symposium on Transport Phenomena, 2005.
  39. Teixeira, R.; Serrenho, A.; Reis, A.; Miguel, Antonio F.; Aydin, M.. "Optimal design of curved and bifurcated flow pipes". Paper presented in 16th International Symposium on Transport Phenomena, 2005.
  40. Miguel, Antonio F.; Reis, A.. "Optimization of the geometry of a solar still". Paper presented in 2nd International Exergy, Energy and Environment Symposium, 2005.
  41. Miguel, Antonio F.; Reis, A.. "Analysis of the exergy balance of green leaves". Paper presented in 2nd International Exergy, Energy and Environment Symposium, 2005.
  42. Miguel, A.F.; Reis, A.H.; Aydin, M.; Silva, A.M.. "Particle deposition in airway bifurcations in different breathing conditions". 2004.
    Published • doi.org/10.1016/S0021-8502(04)00266-6
  43. Miguel, Antonio F.; Aydin, M.; Reis, A.. "Measurement of aerosol deposition in bifurcating ducts with curved inlet". Paper presented in ROOMVENT 2004, 2004.
  44. Aydin, M; Reis, A.; Miguel, Antonio F.; Silva, A.M.. "Particle transport in a two-zone enclosure". Paper presented in ROOMVENT 2004, 2004.
  45. Miguel, Antonio F.; Aydin, M.; Reis, A.. "Particle distribution in a cavity at high Reynolds number flow". Paper presented in 2004 Cappadocia International Mechanical Engineering Conference, 2004.
  46. Aydin, M.; Balik, G.; Miguel, Antonio F.; Reis, A.. "Some features of flow and particle transport in porous structures". Paper presented in ASME - ZSIS International Thermal Science Seminar II, 2004.
  47. Reis, A.; Miguel, Antonio F.; Aydin, M.. "Analysis of loop heat pipe performance under varying wick load". Paper presented in ASME - ZSIS International Thermal Science Seminar II, 2004.
  48. Aydin, M; Balik., G.; Reis, A.; Miguel, Antonio F.. "Convective and diffusive flows in a rhythmically expanding alveolus". Paper presented in International Conference on Applications of Porous Media 2004, 2004.
  49. Reis, A.; Miguel, Antonio F.; Aydin, M.. "Constructal design of a porous structure for gas transport from one opening to a surface". Paper presented in International Conference on Applications of Porous Media 2004, 2004.
  50. Reis, A.; Miguel, Antonio F.; Aydin, M.. "Analysis of filter performance as function of particle diameter, filter internal surface and filter pore size distribution". Paper presented in International Conference on Applications of Porous Media 2004, 2004.
  51. Miguel, Antonio F.; Reis, A.; Aydin, M.. "Dynamic loading of porous filters with fine particles". Paper presented in International Conference on Applications of Porous Media 2004, 2004.
  52. Miguel, Antonio F.; Reis, A.. "Aerosol particle deposition in a ventilation duct flow". Paper presented in 1st International Exergy, Energy and Environment Symposium, 2003.
  53. Reis, A.; Canhoto, P.; Miguel, Antonio F.; Rosa, R.. "Non-flow exergy potential of near ground atmosphere with respect to soil in the Évora region (Portugal)". Paper presented in 1st International Exergy, Energy and Environment Symposium, 2003.
  54. Aydin, M.; Miguel, Antonio F.; Reis, A.. "Numerical simulation of flow in T channel by boundary element method (BEM)". Paper presented in 1st International Exergy, Energy and Environment Symposium, 2003.
  55. Miguel, Antonio F.; Reis, A.. "Non-stationary fluid flow in high-porosity media – an analytical solution to motion equation". Paper presented in 2002 International Conference on Applications of Porous Media, 2002.
  56. Miguel, Antonio F.; Silva, A.M.. "Modelling mass flow properties of porous media". Paper presented in 12th International Conference on Thermal Engineering and Thermogrammetry, 2001.
  57. Miguel, Antonio. "Fractal geometry description of the permeability of a natural fissured rock". 2000.
    doi.org/10.1016/B978-044450517-0/50145-8
  58. Miguel, Antonio F.; Silva, A.M.. "Moisture-caused stress inside porous media". Paper presented in 12th International Symposium on Transport Phenomena, 2000.
  59. Miguel, Antonio F.; Silva, A.M.. "Effect of aperture characteristics on the mean and turbulent heat and on mass flows within enclosures". Paper presented in RoomVent 2000, 2000.
  60. Miguel, AF; Silva, AM. "A modelling approach to support natural ventilation system design". Paper presented in Proceedings of the 2nd International Energy and the Environment Symposium, 1999.
  61. Miguel, Antonio F.; Silva, A.M.. "Modelling mixed fluid motion through porous media". Paper presented in 11th International Conference on Thermal Engineering and Thermogrammetry, 1999.
  62. Miguel, Antonio F.; Van De Braak, N.J.; Silva, A.M.; Bot, G.P.A.. "Analysis of air infiltration in enclosures". Paper presented in International Thermal Energy and Environment Congress (ITEEC 97), 1997.
  63. Miguel, Antonio F.; Van De Braak, N.J.; Silva, A.M.; Bot, G.P.A.. "Forced fluid motion through permeable materials". Paper presented in International Thermal Energy and Environment Congress (ITEEC 97), 1997.
  64. Miguel, Antonio F.; Silva, A.M.; Rosa, R.. "Thermal radiation inside a single span greenhouse with or without a thermal screen". Paper presented in ISHS 91, 1991.
Edited book
  1. Miguel, Antonio F.. Transfer Phenomena in Fluid and Heat Flows XI, Materials Science Series. Switzerland: Trans. Tech. Publications. 2020.
    Published • Editor
  2. Miguel, Antonio; Rocha, L.A.O; Öchsner, A. Transfer Phenomena in Fluid and Heat Flows VII (Materials Science Series). Switzerland: Trans. Tech. Publications. 2019.
    10.4028/www.scientific.net/DDF.396 • Editor
  3. Rocha, L.A.O.; Miguel, Antonio F.; Öchsner, A.. Transfer Phenomena in Fluid and Heat Flows X (Materials Science Series). Switzerland: Trans. Tech. Publications. 2019.
    Editor
  4. Miguel, Antonio; Rocha, L.A.O.; Öchsner, A.. Transport Problems with a Focus on Fluid and Heat Flow (Materials Science Series). Switzerland: Trans. Tech. Publications. 2018.
    10.4028/www.scientific.net/DDF.379 • Editor
  5. Miguel, Antonio F.. Transfer Phenomena in Fluid and Heat Flows II (Materials Science Series). Switzerland: Trans. Tech. Publications. 2017.
    Editor
  6. Transfer Phenomena in Fluid and Heat Flows II (Materials Science Series). 2017.
    doi.org/10.4028/www.scientific.net/DDF.374
  7. Miguel, Antonio; Rocha, L.A.O; Öchsner, A. Transfer Phenomena in Fluid and Heat Flows I (Materials Science Series). Switzerland: Trans. Tech.. 2016.
    10.4028/www.scientific.net/DDF.370 • Editor
  8. Miguel, Antonio F.; Rocha, L.A.O.; Öchsner, A.. Fluid Flow, Energy Transfer and Design II (Materials Science Series). Switzerland: Trans. Tech. Publications. 2015.
    https://www.scientific.net/DDF.362/book • Editor
  9. Miguel, Antonio F.; Rocha, L.A.O.; Öchsner, A.. Fluid Flow, Energy Transfer and Design I (Materials Science Series). Switzerland: Trans. Tech.. 2014.
    https://www.scientific.net/DDF.348/book • Editor
  10. Miguel, Antonio F.. Constructal Human Dynamics, Security and Sustainability (Series Human and Societal Dynamics). Amsterdam, Netherlands: IOS Press. 2009.
    Editor
  11. Reis, A.; Miguel, Antonio F.; Rosa, R.N.. Proceedings of 3rd International Energy, Exergy and Environment Symposium (EEES3). Evora, Portugal: CGE/UEvora. 2007.
    Editor
  12. Rosa, R.N.; Reis, A.; Miguel, Antonio F.. “Bejan’s Constructal Theory of Shape and Structure”. Portugal: CGE/UEvora. 2004.
    Editor
  13. Reis, A.; Miguel, Antonio F.. Applications of Porous Media - Proceedings of International Conference on Applications of Porous Media. Evora, Portugal: CGE-UEvora. 2004.
    Editor
Journal article
  1. Antonio F. Miguel. "Low dissipative configuration in flow networks subject to constraints". Physica D: Nonlinear Phenomena (2024): http://dx.doi.org/10.1016/j.physd.2024.134269.
    10.1016/j.physd.2024.134269
  2. Pepe, V. R.; Miguel, A. A. F.; Zinani, Flavia S. F.; Rocha, L. A. O.. "Obstructed Branching Networks: A Constructal Approach in Fluid Flow Investigation". Defect and Diffusion Forum 435 (2024): 3-14. http://dx.doi.org/10.4028/p-pzpn4r.
    10.4028/p-pzpn4r
  3. Antonio F. Miguel. "Blood flow through a 3D stenosed artery and its constrained bypass graft design". Research on Biomedical Engineering 40 (2024): 297-305. https://doi.org/10.1007/s42600-023-00330-7.
    10.1007/s42600-023-00330-7
  4. Pepe, V. R.; Miguel, A. F.; Zinani, Flavia F.; Rocha, L. A. O.. "Fluid Flow Through Isomeric Constructal Networks of Tubes". Journal of Porous Media 27 (2024): 1-18. http://dx.doi.org/10.1615/jpormedia.2023049512.
    10.1615/jpormedia.2023049512
  5. Antonio F. Miguel. "CFD Analysis of Perforated Plates and Open-Cell Materials Aerodynamics". Defect and Diffusion Forum 429 (2023): 81-90. https://doi.org/10.4028/p-O0aFG5.
  6. Sheng Chen; Antonio F. Miguel; Murat Aydin. "A Constructal Hemodynamic Study of Bypass Grafts with Size Constraint". Journal of Porous Media (2023): http://dx.doi.org/10.1615/jpormedia.2023044761.
    10.1615/jpormedia.2023044761
  7. Antonio F. Miguel. "An assessment of branching asymmetry of the tracheobronchial tree". Scientific Reports 12 1 (2022): 10145. http://dx.doi.org/10.1038/s41598-022-14072-6.
    10.1038/s41598-022-14072-6
  8. Murat Aydn; Miguel, Antonio Ferreira; Devaneyan Solomon Nitesh; Eda Aydin. Corresponding author: Miguel, Antonio Ferreira. "Thermal performance of constructal X-shaped tube heat sinks". International Journal of Exergy 99 (2022):
  9. Pepe, V., R; Miguel, Antonio F.; Zinani, F.S.F.; Rocha, L.A.O.. "New insights into creeping fluid flow through dendritic networks: A constructal view". International Communications in Heat and Mass Transfer 139 (2022): 106409-106409. http://dx.doi.org/10.1016/j.icheatmasstransfer.2022.106409.
    10.1016/j.icheatmasstransfer.2022.106409
  10. Soni, Bharat; Ameeya Kumar Nayak; Miguel, A. A. F.. Corresponding author: Ameeya Kumar Nayak. "Simplified Lumped Parameter Model for Oscillatory Flow in an Elastic Tube: A Hierarchical Approach". Journal of Fluids Engineering 144 8 (2022): http://dx.doi.org/10.1115/1.4053553.
    10.1115/1.4053553
  11. Bharat Soni; Ameeya Kumar Nayak; Miguel, A. A. F.. Corresponding author: Miguel, A. A. F.. "Gas Flow in Occluded Respiratory Tree: A New Matrix-Based Approach". Journal of Fluids Engineering 144 7 (2022): http://dx.doi.org/10.1115/1.4053124.
    10.1115/1.4053124
  12. Chen, S; Miguel, Antonio F.; Aydin, M. Corresponding author: Miguel, Antonio F.. "Constructal design in the cooling and hydraulic performance of tube heat sinks". International Communications in Heat and Mass Transfer 129 (2021): 105668-105668. http://dx.doi.org/10.1016/j.icheatmasstransfer.2021.105668.
    10.1016/j.icheatmasstransfer.2021.105668
  13. Miguel, Antonio F.. "Asymmetric Y-shaped Micromixers with Spherical Mixing Chamber for Enhanced Mixing Efficiency and Reduced Flow Impedance". Journal of Applied Fluid Mechanics 14 5 (2021): http://dx.doi.org/10.47176/jafm.14.05.32317.
    10.47176/jafm.14.05.32317
  14. Miguel, A.F.. "Scale analysis for optimal pattern formation in flow systems". Defect and Diffusion Forum 407 (2021): 59-67. http://www.scopus.com/inward/record.url?eid=2-s2.0-85102412619&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.407.59
  15. Miguel, Antonio F.. "A constructal view of prefractal dendritic flow networks using an exergy analysis". International Journal of Exergy 36 1 (2021): 56-56. http://dx.doi.org/10.1504/ijex.2021.117604.
    10.1504/ijex.2021.117604
  16. Sheng, C.; Miguel, A. F.; Aydin, M.. "Constructal design in the cooling and hydraulic performance of tube heat sinks". Heat and Mass Transfer 129 (2021): 105668. https://publons.com/publon/51180586/.
  17. Nitesh, D.; Aydin, M.; Aydin, E.; Miguel, A.F.. "Heat dissipation by streams of bifurcated tubes". Defect and Diffusion Forum 412 (2021): 39-47. http://www.scopus.com/inward/record.url?eid=2-s2.0-85119203181&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.412.39
  18. Miguel, Antonio F.. "Blood Flow in Prefractal Media: Rheological Model Approaches and Sensitivity Analysis". Journal of Applied Fluid Mechanics 13 06 (2020): 1675-1682. http://dx.doi.org/10.36884/jafm.13.06.31653.
    Published • 10.36884/jafm.13.06.31653
  19. Soni, Bharat; Miguel, Antonio F.; Kumar Nayak, Ameeya. "A mathematical analysis for constructal design of tree flow networks under unsteady flow". Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 476 2240 (2020): 20200377. http://dx.doi.org/10.1098/rspa.2020.0377.
    Published • 10.1098/rspa.2020.0377
  20. Miguel, Antonio F.. "Permeability of fractal porous materials composed of different combinations of capillary tubes". International Journal of Hydromechatronics 3 2 (2020): 199-212. http://dx.doi.org/10.1504/ijhm.2020.107783.
    Published • 10.1504/ijhm.2020.107783
  21. Miguel, A.F.. "Effect of bubbles in optimized Y-shaped tubes of fluid streams". Defect and Diffusion Forum 399 (2020): 123-128. http://www.scopus.com/inward/record.url?eid=2-s2.0-85081085891&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.399.123
  22. Soni, B.; Miguel, A.F.; Kumar Nayak, A.. "A mathematical analysis for constructal design of tree flow networks under unsteady flow: Constructal Design for Tree Network". Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 476 2240 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85096598444&partnerID=MN8TOARS.
    10.1098/rspa.2020.0377rspa20200377
  23. Cetkin, E.; Miguel, A.F.. "Constructal branched micromixers with enhanced mixing efficiency: Slender design, sphere mixing chamber and obstacles". International Journal of Heat and Mass Transfer (2019): 633-644. http://www.scopus.com/inward/record.url?eid=2-s2.0-85057110865&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2018.11.091
  24. Miguel, Antonio. "Characterization of fluid flow through perforated plates". Journal of Porous Media (2019): http://dx.doi.org/10.1615/jpormedia.2019027751.
    10.1615/jpormedia.2019027751
  25. Da Rosa Pepe, V.; Rocha, L.A.O.; Zinani, F.S.F.; Miguel, A.F.. "Numerical study of Newtonian fluid flows in t-shaped structures with impermeable walls". Defect and Diffusion Forum 396 (2019): 177-186. http://www.scopus.com/inward/record.url?eid=2-s2.0-85071938374&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.396.177
  26. Rocha, L.; Miguel, A.F.; Öchsner, A.. "Preface". Defect and Diffusion Forum 396 (2019): II-II. http://www.scopus.com/inward/record.url?eid=2-s2.0-85071957572&partnerID=MN8TOARS.
  27. Miguel, A.F.. "Towards methodologies for optimal fluid networks design". Journal of Applied Fluid Mechanics 12 4 (2019): 1223-1229. http://www.scopus.com/inward/record.url?eid=2-s2.0-85056584649&partnerID=MN8TOARS.
    10.29252/jafm.12.04.29610
  28. Miguel, A.F.. "Optimal Y-shaped constructs heat sinks under different size constraints". International Journal of Heat and Mass Transfer 131 (2019): 64-71. http://www.scopus.com/inward/record.url?eid=2-s2.0-85056607772&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2018.11.033
  29. Miguel, A.F.. "Occlusions in dendritic flow networks". Physica A: Statistical Mechanics and its Applications 535 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85070912640&partnerID=MN8TOARS.
    10.1016/j.physa.2019.122473
  30. Miguel, Antonio F.. "A general model for optimal branching of fluidic networks". Physica A: Statistical Mechanics and its Applications 512 (2018): 665-674. http://dx.doi.org/10.1016/j.physa.2018.07.054.
    10.1016/j.physa.2018.07.054
  31. Miguel, A.F.. "Constructal branching design for fluid flow and heat transfer". International Journal of Heat and Mass Transfer 122 (2018): 204-211. http://www.scopus.com/inward/record.url?eid=2-s2.0-85043502604&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2018.01.095
  32. Pepe, V.R.; Rocha, L.A.O.; Miguel, A.F.; Miguel, Antonio. "Optimality to flow and design of branching ducts". Proceedings of the Romanian Academy Series A - Mathematics Physics Technical Sciences Information Science 19 (2018): 243-248. http://www.scopus.com/inward/record.url?eid=2-s2.0-85049958383&partnerID=MN8TOARS.
  33. Miguel, A. F.. "Heat transfer in flow through branching tubes". International Journal of Hydromechatronics 1 2 (2018): 172-181.
    doi.org/10.1504/IJHM.2018.092726
  34. Miguel, A.F.. "Pressure model for capillary tree-shaped fractal networks". Defect and Diffusion Forum 379 (2017): 166-170. http://www.scopus.com/inward/record.url?eid=2-s2.0-85036670203&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.379.166
  35. Miguel, A.F.; Antonio F. Miguel. "Penetration of inhaled aerosols in the bronchial tree". Medical Engineering and Physics 44 (2017): 25-31. http://www.scopus.com/inward/record.url?eid=2-s2.0-85016411128&partnerID=MN8TOARS.
    10.1016/j.medengphy.2017.03.004
  36. Miguel, A.F.. "Entropy generation: A path for understanding human gait patterns and crowd dynamics". International Journal of Exergy 23 1 (2017): 18-30. http://www.scopus.com/inward/record.url?eid=2-s2.0-85020911097&partnerID=MN8TOARS.
    10.1504/IJEX.2017.084519
  37. Vinicius R. Pepe; Luiz A. O. Rocha; Antonio F. Miguel. "Optimal Branching Structure of Fluidic Networks with Permeable Walls". BioMed Research International (2017):
    10.1155/2017/5284816
  38. Miguel, Antonio. "Is it Hess-Murray law always valid?". CONSTRUCTAL LAW & SECOND LAW CONFERENCE (CLC2017) (2017): https://publons.com/publon/15974557/.
  39. Miguel, A.F.; Antonio F. Miguel. "A study of entropy generation in tree-shaped flow structures". International Journal of Heat and Mass Transfer 92 (2016): 349-359. http://www.scopus.com/inward/record.url?eid=2-s2.0-84941799591&partnerID=MN8TOARS.
    10.1016/j.ijheatmasstransfer.2015.08.067
  40. Antonio F. Miguel; Miguel, A.F.. "Toward an optimal design principle in symmetric and asymmetric tree flow networks". Journal of Theoretical Biology 389 (2016): 101-109. https://publons.com/publon/13290123/.
    10.1016/J.JTBI.2015.10.027
  41. Miguel, A.F.. "Towards an Exergy Analysis of Diffusive and Non-Diffusive Processes in Living Organisms". Diffusion Foundations 7 1 (2016): 177-184. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000305742300006&KeyUID=WOS:000305742300006.
    10.4028/www.scientific.net/DF.7.177
  42. Antonio Ferreira Miguel; Murat Aydin. "Particle Dynamics and Airflow Patterns in a Ventilated Two-Zone Enclosure". International Journal of Fluid Mechanics Research (2016): https://publons.com/publon/15974559/.
    10.1615/INTERJFLUIDMECHRES.V43.I5-6.110
  43. Miguel, A.F.. "A crowd of pedestrian dynamics – The perspective of physics". Physics of Life Reviews 18 (2016): 37-39. http://www.scopus.com/inward/record.url?eid=2-s2.0-84994742947&partnerID=MN8TOARS.
    10.1016/j.plrev.2016.08.001
  44. Miguel, A.F.. "Scaling laws and thermodynamic analysis for vascular branching of microvessels". International Journal of Fluid Mechanics Research 43 5-6 (2016): 390-403. http://www.scopus.com/inward/record.url?eid=2-s2.0-85005817989&partnerID=MN8TOARS.
    10.1615/InterJFluidMechRes.v43.i56.30
  45. Aydin, M.; Miguel, A.F.. "Particle dynamics and airflow patterns in a ventilated two-zone enclosure". International Journal of Fluid Mechanics Research 43 5-6 (2016): 521-530. http://www.scopus.com/inward/record.url?eid=2-s2.0-85005865117&partnerID=MN8TOARS.
    10.1615/InterJFluidMechRes.v43.i56.110
  46. Antonio Ferreira Miguel. "Scaling Laws and Thermodynamic Analysis for Vascular Branching of Microvessels". International Journal of Fluid Mechanics Research (2016): https://publons.com/publon/15974560/.
    10.1615/INTERJFLUIDMECHRES.V43.I5-6.30
  47. Miguel, A.F.. "Fluid flow in a porous tree-shaped network: Optimal design and extension of Hess-Murray's law". Physica A: Statistical Mechanics and its Applications 423 (2015): 61-71. http://www.scopus.com/inward/record.url?eid=2-s2.0-84921418885&partnerID=MN8TOARS.
    10.1016/j.physa.2014.12.025
  48. Miguel, A.F.. "Experimental study on nanofluid flow in a porous cylinder: Viscosity, permeability and inertial factor". Defect and Diffusion Forum 362 (2015): 47-57. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009434682&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.362.47
  49. Andreas Öchsner; Luiz A. O. Rocha; Antonio F. Miguel. "Preface to the Special Issue on Engineering Flow and Design". Open Engineering (2015): https://publons.com/publon/15974562/.
    10.1515/ENG-2015-0029
  50. Antonio F. Miguel; Miguel, Antonio F.. "Key Mechanisms behind Pedestrian Dynamics: Individual and Collective Patterns of Motion". Diffusion Foundations 3 (2015): 153-164. https://publons.com/publon/15974547/.
    10.4028/WWW.SCIENTIFIC.NET/DF.3.153
  51. Miguel, A.F.. "Modelling of mass transport in porous materials: Analytical solutions and analysis". Defect and Diffusion Forum 348 (2014): 107-112. http://www.scopus.com/inward/record.url?eid=2-s2.0-84894279278&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.348.107
  52. Aydin, M.; Günaydinoglu, E.; Miguel, A.F.. "Gas-solid suspension flow near walls: Particle statistical mechanics model and particle force balance equation". Defect and Diffusion Forum 348 (2014): 71-87. http://www.scopus.com/inward/record.url?eid=2-s2.0-84894254209&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.348.71
  53. Miguel, A.F.. "Dendritic design as an archetype for growth patterns in nature: Fractal and constructal views". Frontiers of Physics 2 (2014): 1-7. http://www.scopus.com/inward/record.url?eid=2-s2.0-84948751577&partnerID=MN8TOARS.
    10.3389/fphy.2014.00009
  54. Miguel, A.F.. "Physics' insights into pedestrian motion and crowd dynamics.". Physics of Life Reviews 10 2 (2013): 206-209. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878913552&partnerID=MN8TOARS.
    10.1016/j.plrev.2013.05.006
  55. Miguel, A.F.. "An analytical approach for optimal design of heat sinks under forced convection". Central European Journal of Engineering 3 2 (2013): 276-284. http://www.scopus.com/inward/record.url?eid=2-s2.0-84921527281&partnerID=MN8TOARS.
    10.2478/s13531-012-0054-9
  56. Serrenho, A.; Miguel, A.F.. "Accessing the influence of hess-murray law on suspension flow through ramified structures". Defect and Diffusion Forum 334-335 (2013): 322-328. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879815651&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.334-335.322
  57. Miguel, A.F.. "The emergence of design in pedestrian dynamics: Locomotion, self-organization, walking paths and constructal law". Physics of Life Reviews 10 2 (2013): 168-190. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878953348&partnerID=MN8TOARS.
    10.1016/j.plrev.2013.03.007
  58. Allori, D.; Bartoli, G.; Miguel, A.F.. "Fluid flow through macro-porous materials: Friction coefficient and wind tunnel similitude criteriay". International Journal of Fluid Mechanics Research 39 2 (2012): 136-148. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861505188&partnerID=MN8TOARS.
    10.1615/InterJFluidMechRes.v39.i2.40
  59. Almeida, P.; Silveira, A.; Miguel, A.F.. "Applicability of the forchheimer equation to forced-aerationwindrow composting: Variation of airflow characteristics with humidity and volatile solidsy". International Journal of Fluid Mechanics Research 39 2 (2012): 149-159. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861484291&partnerID=MN8TOARS.
    10.1615/InterJFluidMechRes.v39.i2.50
  60. Miguel, A.F.. "Non-darcy porous media flow in no-slip and slip regimes". Thermal Science 16 1 (2012): 167-176. http://www.scopus.com/inward/record.url?eid=2-s2.0-84868376100&partnerID=MN8TOARS.
    10.2298/TSCI100929001M
  61. Miguel, A.F.. "The physics principle of the generation of flow configuration.". Physics of Life Reviews 8 3 (2011): 243-244. http://www.scopus.com/inward/record.url?eid=2-s2.0-80455164675&partnerID=MN8TOARS.
    10.1016/j.plrev.2011.07.006
  62. Serrenho, A.; Aydin, M.; Miguel, A.F.. "Simulation and characterization of multiphase flow and particle transport in porous media". Journal of Porous Media 14 8 (2011): 691-698. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052678773&partnerID=MN8TOARS.
    10.1615/JPorMedia.v14.i8.30
  63. Serrenho, A.; Miguel, A.F.. "Fluid flow and solid/fluid suspensions flow in 3-D packed beds of spheres: The effect of periodicity of fixed beds". Defect and Diffusion Forum 312-315 (2011): 871-876. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955858716&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.312-315.871
  64. Acikgoz, M.B.; Akay, B.; Miguel, A.F.; Aydin, M.. "Airborne pathogens transport in an aircraft cabin". Defect and Diffusion Forum 312-315 (2011): 865-870. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955807279&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.312-315.865
  65. Miguel, A.F.; Silva, A.. "Solar irradiation in diffusely enclosures with partitions". Applied Energy 87 3 (2010): 836-842. http://www.scopus.com/inward/record.url?eid=2-s2.0-71849114338&partnerID=MN8TOARS.
    10.1016/j.apenergy.2009.10.003
  66. Miguel, A.F.. "Natural flow systems: Acquiring their constructal morphology". International Journal of Design and Nature and Ecodynamics 5 3 (2010): 230-241. http://www.scopus.com/inward/record.url?eid=2-s2.0-78650321803&partnerID=MN8TOARS.
    10.2495/DNE-V5-N3-230-241
  67. Miguel, A.F.. "Fluid flow in tree-shaped constructal networks: Porosity, permeability and inertial parameter". Defect and Diffusion Forum 297-301 (2010): 408-412. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952254942&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.297-301.408
  68. Miguel, A.F.. "Dendritic structures for fluid flow: Laminar, turbulent and constructal design". Journal of Fluids and Structures 26 2 (2010): 330-335. http://www.scopus.com/inward/record.url?eid=2-s2.0-76049096487&partnerID=MN8TOARS.
    10.1016/j.jfluidstructs.2009.11.004
  69. Miguel, A.F.. "Unifying theory for natural and man-made flow systems: An application to design of porous material for particulate control". Defect and Diffusion Forum 297-301 (2010): 413-421. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952276676&partnerID=MN8TOARS.
    10.4028/www.scientific.net/DDF.297-301.413
  70. Miguel, A.. "Carbon dioxide emissions and other environmental indicators: contribution to the study of the European situation between 1990 and 2005". International Journal of Global Warming 2 1 (2010): 81-95. http://www.scopus.com/inward/record.url?eid=2-s2.0-84862888904&partnerID=MN8TOARS.
    10.1504/IJGW.2010.032196
  71. Miguel, A.F.; Heitor Reis, A.. "Moisture intrusion in viscoelastic porous media: Induced-stress and deformation". Thermal Science 13 1 (2009): 47-54. http://www.scopus.com/inward/record.url?eid=2-s2.0-70350561880&partnerID=MN8TOARS.
    10.2298/TSCI0901047M
  72. Aydin, M.; Reis, A.H.; Miguel, A.F.. "Effect of suspended particles on convective heat transfer enhancement". International Journal of Energy Research 33 2 (2009): 180-185. http://www.scopus.com/inward/record.url?eid=2-s2.0-66149138881&partnerID=MN8TOARS.
    10.1002/er.1434
  73. Miguel, A.F.. "Constructal theory of pedestrian dynamics". Physics Letters, Section A: General, Atomic and Solid State Physics 373 20 (2009): 1734-1738. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952275407&partnerID=MN8TOARS.
    10.1016/j.physleta.2009.03.020
  74. Miguel, A.F.; Bejan, A.. "The principle that generates dissimilar patterns inside aggregates of organisms". Physica A: Statistical Mechanics and its Applications 388 5 (2009): 727-731. http://www.scopus.com/inward/record.url?eid=2-s2.0-58149181292&partnerID=MN8TOARS.
    10.1016/j.physa.2008.11.013
  75. Serrenho, A.; Miguel, A.F.. "Simulation and characterization of high-porosity media for aerosol particle processing: A numerical study". Journal of Porous Media 12 12 (2009): 1129-1137. http://www.scopus.com/inward/record.url?eid=2-s2.0-74349087904&partnerID=MN8TOARS.
  76. Canhoto, P.; Reis, A.H.; Miguel, A.F.. "Performance analysis of an endoreversible heat pump system for optimal air-ground or water environmental exergy potential utilization". International Journal of Energy Research 33 2 (2009): 205-210. http://www.scopus.com/inward/record.url?eid=2-s2.0-66149127353&partnerID=MN8TOARS.
    10.1002/er.1437
  77. Miguel, A.; Heitor Reis, A.; Melgão, M.. "Urban indoor-outdoor aerosol measurements in Portugal and the global warming scenario". International Journal of Global Warming 1 1-3 (2009): 356-367. http://www.scopus.com/inward/record.url?eid=2-s2.0-84862835139&partnerID=MN8TOARS.
    10.1504/IJGW.2009.027098
  78. Miguel, A.. "Quantitative study of the CO2 emission to the atmosphere from biological scaling laws". International Journal of Global Warming 1 1-3 (2009): 129-143. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956173009&partnerID=MN8TOARS.
    10.1504/IJGW.2009.027085
  79. Miguel, A.F.. "Constructal design of solar energy-based systems for buildings". Energy and Buildings 40 6 (2008): 1020-1030. http://www.scopus.com/inward/record.url?eid=2-s2.0-38949186808&partnerID=MN8TOARS.
    10.1016/j.enbuild.2007.08.005
  80. Balik, G.; Reis, A.H.; Aydin, M.; Miguel, A.F.. "Behavior of submicrometer particles in periodic alveolar airflows". European Journal of Applied Physiology 102 6 (2008): 677-683. http://www.scopus.com/inward/record.url?eid=2-s2.0-39149105949&partnerID=MN8TOARS.
    10.1007/s00421-007-0638-x
  81. Miguel, A.F.; Serrenho, A.. "On the experimental evaluation of permeability in porous media using a gas flow method". Journal of Physics D: Applied Physics 40 21 (2007): 6824-6828. http://www.scopus.com/inward/record.url?eid=2-s2.0-35548974856&partnerID=MN8TOARS.
    10.1088/0022-3727/40/21/050
  82. Teixeira, R.; Miguel, A.F.. "Particle deposition in random fibrous porous materials: Effect of acoustic fields, fibres distribution and porosity". Journal of Mechanical Science and Technology 21 11 (2007): 1881-1885. http://www.scopus.com/inward/record.url?eid=2-s2.0-36249009973&partnerID=MN8TOARS.
  83. Miguel, Antonio. "Constructal pattern formation in nature, pedestrian motion, and epidemics propagation". Constructal Theory of Social Dynamics (2007): https://publons.com/publon/13290143/.
    10.1007/978-0-387-47681-0_5
  84. Reis, Antonio Heitor; Miguel, Antonio Ferreira. "Constructal theory and flow architectures in living systems". Thermal Science 10 1 (2006): 57-64.
    10.2298/TSCI0601057R
  85. Miguel, A.F.; Reis, A.H.. "Transport and deposition of fine mode particles in porous filters". Journal of Porous Media 9 8 (2006): 731-744. http://www.scopus.com/inward/record.url?eid=2-s2.0-33847667946&partnerID=MN8TOARS.
    10.1615/JPorMedia.v9.i8.30
  86. Reis, A.H.; Miguel, A.F.; Bejan, A.. "Constructal theory of particle agglomeration and design of air-cleaning devices". Journal of Physics D: Applied Physics 39 10 (2006): 2311-2318. http://www.scopus.com/inward/record.url?eid=2-s2.0-33646735949&partnerID=MN8TOARS.
    10.1088/0022-3727/39/10/046
  87. Miguel, A.F.. "Constructal pattern formation in stony corals, bacterial colonies and plant roots under different hydrodynamics conditions". Journal of Theoretical Biology 242 4 (2006): 954-961. http://www.scopus.com/inward/record.url?eid=2-s2.0-33748440939&partnerID=MN8TOARS.
    10.1016/j.jtbi.2006.05.010
  88. Canhoto, P.; Reis, A.H.; Miguel, A.F.; Rosa, R.. "Utilisation of air-groundwater exergy potential for improvement of the performance of heat pump systems". International Journal of Exergy 3 1 (2006): 1-15. http://www.scopus.com/inward/record.url?eid=2-s2.0-66149105750&partnerID=MN8TOARS.
  89. Reis, A.H.; Miguel, A.. "Analysis of the exergy balance of green leaves". International Journal of Exergy 3 3 (2006): 231-238. http://www.scopus.com/inward/record.url?eid=2-s2.0-61449260117&partnerID=MN8TOARS.
  90. Miguel, A.F.; Aydin, M.; Reis, A.H.. "Indoor deposition and forced re-suspension of respirable particles". Indoor and Built Environment 14 5 (2005): 391-396. http://www.scopus.com/inward/record.url?eid=2-s2.0-27344441724&partnerID=MN8TOARS.
    10.1177/1420326X05057948
  91. Reis, A.H.; Miguel, A.F.; Aydin, M.. "Analysis of loop heat pipe performance under varying wick load". Strojniski Vestnik/Journal of Mechanical Engineering 51 7-8 (2005): 451-455. http://www.scopus.com/inward/record.url?eid=2-s2.0-27144444728&partnerID=MN8TOARS.
  92. Miguel, A.F.; Heitor Reis, A.. "Transient forced convection in an isothermal fluid-saturated porous-medium layer: Effective permeability and boundary layer thickness". Journal of Porous Media 8 2 (2005): 165-174. http://www.scopus.com/inward/record.url?eid=2-s2.0-19544374700&partnerID=MN8TOARS.
    10.1615/JPorMedia.v8.i2.50
  93. Aydin, M.; Balik, G.; Miguel, A.F.; Reis, A.H.. "Some features of flow and particle transport in porous structures". Strojniski Vestnik/Journal of Mechanical Engineering 51 7-8 (2005): 495-500. http://www.scopus.com/inward/record.url?eid=2-s2.0-27144548855&partnerID=MN8TOARS.
  94. Reis, A.H.; Miguel, A.F.; Aydin, M.. "Constructal theory of flow architecture of the lungs". Medical Physics 31 5 (2004): 1135-1140. http://www.scopus.com/inward/record.url?eid=2-s2.0-2442720276&partnerID=MN8TOARS.
    10.1118/1.1705443
  95. Miguel, A.F.; Reis, A.H.; Aydin, M.. "Aerosol particle deposition and distribution in bifurcating ventilation ducts". Journal of Hazardous Materials 116 3 (2004): 249-255. http://www.scopus.com/inward/record.url?eid=2-s2.0-10444247354&partnerID=MN8TOARS.
    10.1016/j.jhazmat.2004.09.013
  96. Miguel, Antonio F.; Aydin, M.; Silva, A.M.. "Particle deposition in airway bifurcations in different breathing conditions". Journal of Aerosol Science (European Aerosol Conference 2004) 35 S2 (2004): 1125-1126. https://dspace.uevora.pt/rdpc/handle/10174/5481.
  97. Miguel, A.F.. "Effect of air humidity on the evolution of permeability and performance of a fibrous filter during loading with hygroscopic and non-hygroscopic particles". Journal of Aerosol Science 34 6 (2003): 783-799. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038703401&partnerID=MN8TOARS.
    10.1016/S0021-8502(03)00027-2
  98. Miguel, Antonio F.; Silva, A. M.. "Particle deposition onto a flat plate with various slopes". Journal of Aerosol Science 34 S1 (2003): 667-668. https://dspace.uevora.pt/rdpc/handle/10174/6929.
    Published
  99. Miguel, A.F.; Van De Braak, N.J.; Silva, A.M.; Bot, G.P.A.. "Wind-induced airflow through permeable materials. Part II: Air infiltration in enclosures". Journal of Wind Engineering and Industrial Aerodynamics 89 1 (2001): 59-72. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034744824&partnerID=MN8TOARS.
    10.1016/S0167-6105(00)00028-3
  100. Miguel, A.F.; Van De Braak, N.J.; Silva, A.M.; Bot, G.P.A.. "Wind-induced airflow through permeable materials. Part I: The motion equation". Journal of Wind Engineering and Industrial Aerodynamics 89 1 (2001): 45-57. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034744779&partnerID=MN8TOARS.
    10.1016/S0167-6105(00)00027-1
  101. Miguel, Antonio F.; Silva, A M. "Experimental study of aerosol mass loading behaviour of fibre filters". Journal of Aerosol Science 32 S1 (2001): 851-852. https://dspace.uevora.pt/rdpc/handle/10174/6974.
    Published
  102. Miguel, A.F.; Silva, A.M.. "Porous materials to control climate behaviour of enclosures: An application to the study of screened greenhouses". Energy and Buildings 31 3 (2000): 195-209. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033879046&partnerID=MN8TOARS.
    10.1016/S0378-7788(99)00010-9
  103. Miguel, A.F.. "Contribution to flow characterisation through porous media". International Journal of Heat and Mass Transfer 43 13 (2000): 2267-2272. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033626918&partnerID=MN8TOARS.
    10.1016/S0017-9310(99)00306-3
  104. Miguel, A.F.; Silva, A.M.. "Analysis of wind-induced internal pressure in enclosures". Energy and Buildings 32 1 (2000): 101-107. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033741768&partnerID=MN8TOARS.
    10.1016/S0378-7788(99)00043-2
  105. Miguel, Antonio. "A modelling approach to support natural ventilation system design". Energy and the Environment (1999): https://publons.com/publon/7845977/.
  106. Miguel, Antonio F.. "Wind-caused air transport through greenhouse screens: a physical modelling approach". International Agrophysics 13 2 (1999): 191-195. http://www.international-agrophysics.org/Wind-caused-air-transport-through-greenhouse-screens-a-physical-modelling-approach,106948,0,2.html.
  107. Miguel, A.F.; Van De Braak, N.J.; Silva, A.M.; Bot, G.P.A.. "Physical modelling of natural ventilation through screens and windows in greenhouses". Journal of Agricultural Engineering Research 70 2 (1998): 165-176. http://www.scopus.com/inward/record.url?eid=2-s2.0-0000497960&partnerID=MN8TOARS.
  108. Miguel, A.F.; Van De Braak, N.J.; Silva, A.M.; Bot, G.P.A.. "Free-convection heat transfer in screened greenhouses". Journal of Agricultural Engineering Research 69 2 (1998): 133-139. http://www.scopus.com/inward/record.url?eid=2-s2.0-0000610657&partnerID=MN8TOARS.
  109. António F. Miguel. "Airflow through porous screens: From theory to practical considerations". Energy and Buildings (1998): https://publons.com/publon/13290174/.
    10.1016/S0378-7788(97)00065-0
  110. Miguel, A.F.; Silva, A.M.; Van De Braak, N.J.; Bot, G.P.A.. "Modelling of transport phenomena near greenhouse screens". ISHS Acta Horticulturae 456 (1998): http://www.scopus.com/inward/record.url?eid=2-s2.0-0012480685&partnerID=MN8TOARS.
  111. Miguel, A.F.; Van De Braak, N.J.; Bot, G.P.A.. "Analysis of the airflow characteristics of greenhouse screening materials". Journal of Agricultural Engineering Research 67 2 (1997): 105-112. http://www.scopus.com/inward/record.url?eid=2-s2.0-0000509626&partnerID=MN8TOARS.
  112. Miguel, A.F.; Silva, A.M.; Rosa, R.. "Solar Irradiation Inside a Single-span Greenhouse with Shading Screens". Journal of Agricultural Engineering Research 59 1 (1994): 61-72. http://www.scopus.com/inward/record.url?eid=2-s2.0-0005526652&partnerID=MN8TOARS.
    10.1006/jaer.1994.1064
  113. Silva, A.M.; Miguel, A.; Rosa, R.. "Thermal radiation inside a single span greenhouse with a thermal screen". Journal of Agricultural Engineering Research 49 C (1991): 285-298. http://www.scopus.com/inward/record.url?eid=2-s2.0-0342888949&partnerID=MN8TOARS.
    10.1016/0021-8634(91)80045-G
  114. Rosa, R.; Silva, A.M.; Miguel, A.. "Solar irradiation inside a single span greenhouse". Journal of Agricultural Engineering Research 43 C (1989): 221-229. http://www.scopus.com/inward/record.url?eid=2-s2.0-38249022429&partnerID=MN8TOARS.
    10.1016/S0021-8634(89)80020-4
Journal issue
  1. Öchsner, A.; Rocha, L.A.O.; Miguel, Antonio F.. "Special Issue “Optimal Fluid Systems & Machinery”". Research on Engineering Structures & Materials 4 3 (2018): https://jresm.org/archive/vol4iss3.html.
    Invited editor
  2. Öchsner, A.; Rocha, L.A.O.; Miguel, Antonio F.. "Special Issue “ Fluid Flow, Energy Transfer and Design”". International Journal of Fluid Mechanics Research 43 5-6 (2016): http://dx.doi.org/10.1615/interjfluidmechres.v43.i5-6.
    Invited editor
  3. Öchsner, A.; Rocha, L.A.O.; Miguel, Antonio F.. "Special Issue “Engineering Flow and Design”". Open Engineering (Germany: De Gruyter) 5 1 (2015): https://www.degruyter.com/view/j/eng.2015.5.issue-1/eng-2015-0029/eng-2015-0029.xml?lang=en.
    Invited editor
  4. Öchsner, A.; Rocha, L.A.O.; Miguel, Antonio F.. "Special Issue “Fluid Flow: Analysis and Numerics”". Computational Thermal Sciences 4 2 (2012): http://dx.doi.org/10.1615/computthermalscien.v4.i2.
    10.1615/computthermalscien.v4.i2 • Invited editor
  5. Öchsner, A.; Rocha, L.A.O; Miguel, Antonio F.. "Special Issue “Configuration and Evolution of Flow Systems”". International Journal of Fluid Mechanics Research 39 2 (2012): http://dx.doi.org/10.1615/interjfluidmechres.v39.i2.
    Invited editor
  6. Reis, A.; Miguel, Antonio F.. "Special Issue “The Changing Energy Paradigm, Challenges and New Developments”". International Journal of Energy Research 33 2 (2009): https://onlinelibrary.wiley.com/toc/1099114x/2009/33/2.
    Invited editor
  7. Reis, A.; Miguel, Antonio F.. "Special Special Issue “Sustainable Energy Sources and Developing Clean Energy Technologies”". International Journal of Green Energy 6 3 (2009): https://www.tandfonline.com/toc/ljge20/6/3?nav=tocList.
    Invited editor
  8. Miguel, Antonio F.; Reis, A.. "Special Issue “Recent Advances in Exergy Research”". International Journal of Exergy 5 5/6 (2008): https://www.inderscience.com/info/inarticletoc.php?jcode=ijex&year=2008&vol=5&issue=5/6.
    Invited editor
Distinctions

Other distinction

2013 Honorary Fellow:
Australian Institute of High Energetic Materials, Australia