???global.info.a_carregar???
Paulo Bartolo holds a PhD from the University of Reading (2001), an MSC in Mechanical Engineering (1996) and a first degree (Licenciatura – five year programme) in Mechanical Engineering (1993) both from the University of Lisbon (Portugal). Since August 2021, he is Professor at the School of Mechanical and Aerospace Engineering (MAE), Nanyang Technological University (NTU), Executive Director of Singapore Centre for 3D Printing (SC3DP) and Programme Director of the National Additive Manufacturing Innovation Cluster (NAMIC) hub at NTU. As Programme Director of the NAMIC Hub at NTU he is also member of the NAMIC Joint Cluster-Agency Management and NAMIC Cluster Project Evaluation Panel. He is Honorary Professor at Xi’an Jiatong-Liverpool University, Collaborator Professor at the Advanced Manufacturing Group at the Tecnologico de Monterrey (Mexico), and the University of Manchester (UK). Between 2014 and 2021, Prof. Bartolo was Chair Professor on Advanced Manufacturing at the University of Manchester, where he was the Head of the Manufacturing Group (2015-2021); Leader of the Innovative Manufacturing Research Theme (2015-2021); the Industry 4.0 Academic Lead (2018-2021); the theme leader for the Industry 5.0 societal challenge area within the Digital Futures (2018-2021); member of the Thomas Ashton Institute (Academic Lead for Industry 4.0 – implications for health and safety) (2019-2021); the coordinator of the “scale-up and manufacture” cross-cutting capability of the Advanced Medical Materials@Manchester platform; member of the Manchester Regenerative Medicine Network – Enabling Technologies domain (2020-2021); member of the GAMBICA University Industry Collaboration Council (2018-2021); member of the University Global Challenges Research Fund (GCRF) Peer Review College (2019-2021); member of the University of Manchester Innovation Community (2020); member of the Department of Mechanical, Aerospace and Civil Engineering (MACE) Executive Committee (2020-2021); member of the Departmental Committee for the Research Excellence Framework 2021 (REF2021) Engineering Unit of Assessment 12 (UOA12) (2019-2021); member of the Advanced Manufacturing Strategic Oversight Group (2020-2021); member of the Management Board of the EPSRC & MRC Centre for Doctoral Training in Regenerative Medicine (2016-2021); and a representative of the University of Manchester at the Advanced Machinery and Productivity Institute. He was also member of the Senior Leadership Team Committee (2014-2017) and member of the Promotion Committee (2014-2017) both at the School of Mechanical, Aerospace and Civil Engineering; Co-Champion of the Biomedical Devices and Systems core area at the Sir Henry Royce Institute (SHRI) for Advanced Materials (2016-2017) a major UK initiative (£250M), and member of its Scientific Committee (2016-2017). Between 1994 and 2014, Paulo Bartolo served the Polytechnic Institute of Leiria (Portugal) as Lecturer, Assistant Professor and Coordinator Professor. At the Polytechnic Institute of Leiria, he was the founder and Director of the Centre for Rapid and Sustainable Product Development (2007-2013); Head of the Mechanical Engineering Department (2001-2009); President of the Research Assessment Commission (2009-2013); President of the Scientific Council for Research, Development and Advanced Studies (2009-2013); and Member of the Academic Council and Senate (2009-2013). He is a Fellow of CIRP (The International Academy of Production Engineering) and served the Academy as Chairman of the CIRP Scientific Technical Committee on Electro-Physical and Chemical Processes (STC E) (2016-2019) and as Vice-Chairman of STC E (2013-2016) and Vice-Chairman of the CIRP Collaborative Working Group on Biomanufacturing (2010-2012). Paulo Bartolo was also Advisor of the Brazilian Institute of Biofabrication funded by the Brazilian Government; member of the Additive Manufacturing Platform and member of the Global Alliance of Rapid Prototyping Associations.
Read full resume ↓
Identification

Personal identification

Full name
Paulo Jorge Silva Bartolo

Citation names

  • Bartolo, Paulo

Author identifiers

Ciência ID
5810-9BF9-4522
ORCID iD
0000-0003-3683-726X

Email addresses

  • pbartolo@ntu.edu.sg (Professional)

Knowledge fields

  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Materials Engineering
  • Engineering and Technology - Medical Engineering
  • Medical and Health Sciences - Medical Biotechnology - Biomaterials

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese (Mother tongue)
English Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2)
Education
Degree Classification
2001
Concluded
 Polymer Physics (Doctor of Philosophy)
University of Reading, United Kingdom
1996
Concluded
 Engenharia Mecânica (Mestrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal
1993
Concluded
 Engenharia Mecânica (Licenciatura)
Universidade de Lisboa Instituto Superior Técnico, Portugal
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2021/08 - Current Full Professor (University Teacher) Nanyang Technological University, Singapore
2014/02/01 - 2022 Full Professor (University Teacher) The University of Manchester - North Campus, United Kingdom
2002 - 2015 Teacher Coordinator (Polytechnic Teacher) Instituto Politécnico de Leiria, Portugal
1996 - 2002 Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico de Leiria, Portugal
1994 - 1996 Assistant (Polytechnic Teacher) Instituto Politécnico de Leiria, Portugal

Positions / Appointments

Category
Host institution 		Employer
2021/08 - Current Organic Unit Director Nanyang Technological University Singapore Centre for 3D Printing, Singapore
2021 - Current Programme Director of the National Additive Manufacturing Innovation Cluster (NAMIC) Hub at NTU Nanyang Technological University, Singapore
2015/03 - Current Collaborator Professor of the Advanced Manufacturing Group Instituto Tecnológico y de Estudios Superiores de Monterrey, Mexico
2020/09 - 2021/08 Member of the Advanced Manufacturing Strategic Oversight Group The University of Manchester - North Campus, United Kingdom
2019/11 - 2021/08 Academic Lead for Industry 4.0 – implications for health and safety at the Thomas Ashton Institute The University of Manchester - North Campus, United Kingdom
2018/07 - 2021/08 Industry 4.0 University Academic Lead The University of Manchester - North Campus, United Kingdom
2018/07 - 2021/08 Theme Leader of Industry 5.0 The University of Manchester, United Kingdom
2016/06 - 2021/08 Management Board of the EPSRC & MRC Centre for Doctoral Training (CDT) in Regenerative Medicine The University of Manchester - North Campus, United Kingdom
2015 - 2021/08 Leader of the Innovative Manufacturing Research Theme The University of Manchester - North Campus, United Kingdom
2015/07 - 2021/07 Head of the Manufacturing Group The University of Manchester - North Campus, United Kingdom
2020/04 - 2021/04 Member of the Department of Mechanical, Aerospace and Civil Engineering Executive Committee The University of Manchester - North Campus, United Kingdom
2019/09 - 2021/02 Member of the Departmental Committee for the Research Excellence Framework 2021 (REF2021) Engineering Unit of Assessment 12 (UOA) The University of Manchester, United Kingdom
2014/05 - 2019/07 Visiting Professor Nanyang Technological University, Singapore
2019/06 - 2019/06 Visiting Professor Universitat de Girona, Spain
2017/06 - 2017/06 Visiting Professor Universitat de Girona, Spain
2015 - 2017 Co-Champion for the Biomaterials core area at the Sir Royce Institute of Advanced Materials The University of Manchester - North Campus, United Kingdom
2014 - 2017 Member of the Senior Leadership Team Committee, School of Mechanical, Aerospace and Civil Engineering The University of Manchester - North Campus, United Kingdom
2014 - 2017 Member of the School Promotion Committee, School of Mechanical, Aerospace and Civil Engineering The University of Manchester - North Campus, United Kingdom
2011/02 - 2014/02 Adjunct Professor Queensland University of Technology, Australia
2009/10 - 2014/02 President of the Research Assessment Commission Instituto Politécnico de Leiria, Portugal
2009/07 - 2014/02 Member of the Academic Council and General Council Instituto Politécnico de Leiria, Portugal
2009 - 2014 President of the Scientific-Technical Council Instituto Politécnico de Leiria, Portugal
Instituto Politécnico de Leiria Instituto de Investigação Desenvolvimento e Estudos Avançados, Portugal
2007 - 2014 Organic Unit Director Instituto Politécnico de Leiria, Portugal
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2012/05 - 2012/05 Visiting Professor Universitat de Girona, Spain
2011/07 - 2011/08 Visiting Professor Rutgers The State University of New Jersey, United States
2011/05 - 2011/05 Visiting Professor Universitat de Girona, Spain
2004/02 - 2006/08 Co-Director of the Executive Committee of the Centre for Post-Graduate Studies Instituto Politécnico de Leiria, Portugal
Outputs

Publications

Book chapter
  1. Hassan, Mohamed H.; Sharma, Jatin; Bartolo, Paulo. "Computational Origami Based Design in 4D Printing". In Progress in Digital and Physical Manufacturing, 54-59. Springer International Publishing, 2023.
    Published • 10.1007/978-3-031-33890-8_5
  2. Yang, Jiong; Mirihanage, Wajira; Bartolo, Paulo. "Novel Extrusion Based Co-axial Printing Head for Tissue Engineering". In Progress in Digital and Physical Manufacturing, 60-71. Springer International Publishing, 2023.
    Published • 10.1007/978-3-031-33890-8_6
  3. Alhijaily, Abdullah; Kilic, Zekai M.; Bartolo, Paulo. "Localization and Control of a Mobile Robot for Additive Manufacturing". In Progress in Digital and Physical Manufacturing, 72-81. Springer International Publishing, 2023.
    Published • 10.1007/978-3-031-33890-8_7
  4. Ni, Xiyao; Kendall, Thomas; Bartolo, Paulo. "Modelling the Material Removal Process of Turbulent Jet Electrochemical Machining of Copper". In Progress in Digital and Physical Manufacturing, 95-105. Springer International Publishing, 2023.
    Published • 10.1007/978-3-031-33890-8_9
  5. Ding, Yifei; Bartolo, Paulo. "Numerical Simulation of Mould-Open Microcellular Injection Moulding". In Progress in Digital and Physical Manufacturing, 242-252. Springer International Publishing, 2023.
    Published • 10.1007/978-3-031-33890-8_21
  6. Yue, Hexin; Vyas, Cian; Bartolo, Paulo. "3D Printing and Direct Polymer Casting of Microgroove Nerve Guidance Conduits". In Progress in Digital and Physical Manufacturing, 370-378. Springer International Publishing, 2023.
    Published • 10.1007/978-3-031-33890-8_34
  7. Hou, Yanhao; Wang, Weiguang; Bartolo, Paulo. "Investigating the Degradation Properties of Poly(e-caprolactone) and Polyethylene Terephthalate Glycol as Biomaterials". In Progress in Digital and Physical Manufacturing, 379-387. Springer International Publishing, 2023.
    Published • 10.1007/978-3-031-33890-8_35
  8. Omar, Abdalla M.; Vyas, Cian; Hassan, Mohamed H.; Bartolo, Paulo. "Morphological Investigation of Electrospun PVDF (HFP)-Carbon Black Nanocomposites". In Progress in Digital and Physical Manufacturing, 399-405. Springer International Publishing, 2023.
    Published • 10.1007/978-3-031-33890-8_37
  9. Hassan, Mohamed H.; Omar, Abdalla M.; Daskalakis, Evangelos; Grieve, Bruce; Bartolo, Paulo. "Smart biomaterials and constructs for Bone tissue regeneration". In New Trends in Smart Nanostructured Biomaterials in Health Sciences, 177-209. Elsevier, 2023.
    Published • 10.1016/b978-0-323-85671-3.00007-5
  10. Tartici, Idil; Kilic, Zekai Murat; Da Silva Bartolo, Paulo Jorge. "Impact of Additive Manufacturing in SMEs". In Lecture Notes in Mechanical Engineering, 103-111. Springer Nature Singapore, 2022.
    Published • 10.1007/978-981-19-0561-2_10
  11. Daskalakis, Evangelos; Xu, Zhanyan; Omar, Abdalla M.; Liu, Fengyuan; Acar, Anil A.; Fallah, Ali; Cooper, Glen; et al. "Designing Novel Synthetic Grafts for Large Bone Defects: Experimental and Numerical Studies". In Experiments and Simulations in Advanced Manufacturing, edited by Panagiotis Kyratsis; J Paulo Davim, 71-89. Cham, Switzerland: Springer International Publishing, 2021.
    Published • 10.1007/978-3-030-69472-2_4
  12. Craveiro, Flávio; Pinto Duarte, José; Bártolo, Helena; Bartolo, Paulo. "A multi-material extrusion nozzle for functionally graded concrete printing". In Industry 4.0 - Shaping The Future of the Digital World, 130-135. Taylor & Francis Group, 2020.
    Published
  13. Alqahtani, Mohammed S.; Omar, Abdalla M.; Cooper, Glen; Bartolo, P. J.. "Modeling and Simulation of a Novel Functional Brace for Large Bone Defects". In Progress in Digital and Physical Manufacturing, edited by Henrique Almeida; Joel Vasco, 155-161. Cham, Switzerland: Springer International Publishing, 2020.
    Published • 10.1007/978-3-030-29041-2_20
  14. Mishbak, H.; Aslan, Enes; Cooper, Glen; Bartolo, P. J.. "Photocurable Alginate Bioink Development for Cartilage Replacement Bioprinting". In Progress in Digital and Physical Manufacturing, edited by Henrique Almeida; Joel Vasco, 243-249. Cham, Switzerland: Springer International Publishing, 2020.
    Published • 10.1007/978-3-030-29041-2_30
  15. Omar, A.; Bartolo, P.. "Slot-die simulations for 3D printing of Perovskite Solar Cells (PSCs)". In Industry 4.0 – Shaping The Future of The Digital World, 183-187. CRC Press, 2020.
    Published • 10.1201/9780367823085-33
  16. Bakker, O.J.; Kendall, T.; Bartolo, P.. "Health and safety in smart industry: State-of-the-art and future trends". In Industry 4.0 – Shaping The Future of The Digital World, 57-62. CRC Press, 2020.
    Published • 10.1201/9780367823085-11
  17. Alhijaily, A.; Bartolo, P.; Alhijaily, T.. "Remote monitoring and controlling of an additive manufacturing machine". In Industry 4.0 – Shaping The Future of The Digital World, 188-192. CRC Press, 2020.
    Published • 10.1201/9780367823085-34
  18. Kendall, T.; Bartolo, P.; Diver, C.; Gillen, D.. "Investigation into post-processing electron beam melting parts using jet electrochemical machining". In Industry 4.0 – Shaping The Future of The Digital World, 148-154. CRC Press, 2020.
    Published • 10.1201/9780367823085-27
  19. Aslan, E.; Daskalakis, E.; Vyas, C.; JDS. Bartolo, P.. "Physical and biological properties of electrospun PCL meshes as a function of polymer concentration and voltage". In Industry 4.0 – Shaping The Future of The Digital World, 234-239. CRC Press, 2020.
    Published • 10.1201/9780367823085-42
  20. Desai, Salil; Bidanda, Bopaya; Bártolo, Paulo Jorge. "Emerging Trends in the Applications of Metallic and Ceramic Biomaterials". In Bio-Materials and Prototyping Applications in Medicine, 1-17. Springer International Publishing, 2020.
    Published • 10.1007/978-3-030-35876-1_1
  21. Mishbak, Hussein; Vyas, Cian; Cooper, Glen; Peach, Chris; Pereira, Rúben F.; Bártolo, Paulo Jorge. "Engineering Natural-Based Photocrosslinkable Hydrogels for Cartilage Applications". In Bio-Materials and Prototyping Applications in Medicine, 111-138. Springer International Publishing, 2020.
    Published • 10.1007/978-3-030-35876-1_7
  22. Alqahtani, Mohammed S.; Cooper, Glen; Diver, Carl; Bártolo, Paulo Jorge. "Exoskeletons for Lower Limb Applications: A Review". In Bio-Materials and Prototyping Applications in Medicine, 139-164. Springer International Publishing, 2020.
    Published • 10.1007/978-3-030-35876-1_8
  23. Daskalakis, Evangelos; Liu, Fengyuan; Cooper, Glen; Weightman, Andrew; Koç, Bahattin; Blunn, Gordon; Bártolo, Paulo Jorge. "Bioglasses for Bone Tissue Engineering". In Bio-Materials and Prototyping Applications in Medicine, 165-193. Springer International Publishing, 2020.
    Published • 10.1007/978-3-030-35876-1_9
  24. Huang, Boyang; Almeida, Henrique; Bidanda, Bopaya; Bártolo, Paulo Jorge. "Additive Biomanufacturing Processes to Fabricate Scaffolds for Tissue Engineering". In Virtual Prototyping & Bio Manufacturing in Medical Applications, 95-124. Springer International Publishing, 2020.
    Published • 10.1007/978-3-030-35880-8_5
  25. Aslan, Enes; Almeida, Henrique; Al-Deyab, Salem; El-Newehy, Mohamed; Bartolo, Helena; Bártolo, Paulo Jorge. "The Electrospinning Process". In Virtual Prototyping & Bio Manufacturing in Medical Applications, 153-185. Springer International Publishing, 2020.
    Published • 10.1007/978-3-030-35880-8_7
  26. Liu, Fengyuan; Vyas, Cian; Yang, Jiong; Ates, Gokhan; Bártolo, Paulo Jorge. "A Review of Hybrid Biomanufacturing Systems Applied in Tissue Regeneration". In Virtual Prototyping & Bio Manufacturing in Medical Applications, 187-213. Springer International Publishing, 2020.
    Published • 10.1007/978-3-030-35880-8_8
  27. Al-Tamimi, Abdulsalam Abdulaziz; Al-Qahtani, Mohammed S.; Liu, Fengyuan; Alkahtani, Areej; Peach, Chris; Bártolo, Paulo Jorge. "A Review on Powder Bed Fusion Additive Manufacturing for Metallic Fixation Implants". In Virtual Prototyping & Bio Manufacturing in Medical Applications, 235-256. Springer International Publishing, 2020.
    Published • 10.1007/978-3-030-35880-8_10
  28. Xu, Zhanyan; Bártolo, Paulo Jorge. "Scaffold Design for Nerve Regeneration". In Virtual Prototyping & Bio Manufacturing in Medical Applications, 257-283. Springer International Publishing, 2020.
    Published • 10.1007/978-3-030-35880-8_11
  29. Almeida, Henrique A.; Bártolo, Paulo J.. "Biomimetic Boundary-Based Scaffold Design for Tissue Engineering Applications". In Computer-Aided Tissue Engineering, 3-18. Springer US, 2020.
    Published • 10.1007/978-1-0716-0611-7_1
  30. Fengyuan Liu; Huang, Boyang; Sri Hinduja; Bartolo, Paulo. "Biofabrication techniques for ceramics and composite bone scaffolds". In Bioceramics and Biocomposites - from research to clinical practice. Wiley, 2019.
    Published
  31. Daskalakis, Evangelos; Aslan, Enes; Liu, Fengyuan; Cooper, Glen; Weightman, Andrew; Koç, Bahattin; Blunn, Gordon; Bartolo, P. J.. "Composite Scaffolds for Large Bone Defects". In Progress in Digital and Physical Manufacturing, 250-257. Springer International Publishing, 2019.
    Published • 10.1007/978-3-030-29041-2_31
  32. Aslan, Enes; Vyas, Cian; Diver, Carl; Humphreys, Gavin; Bartolo, P. J.. "Bi-material Electrospun Meshes for Wound Healing Applications". In Progress in Digital and Physical Manufacturing, 258-264. Springer International Publishing, 2019.
    Published • 10.1007/978-3-030-29041-2_32
  33. Craveiro, Flávio; Duarte, José P.; Bártolo, Helena; Bártolo, Paulo. "Moving Forward to 3D/4D Printed Building Facades". In Progress in Digital and Physical Manufacturing, 277-282. Springer International Publishing, 2019.
    Published • 10.1007/978-3-030-29041-2_35
  34. Bartolo, Paulo. "Mathematical Modeling of 3D Tissue Engineering Constructs". 2018.
    10.1007/978-3-319-45444-3_5
  35. Almeida, Henrique Amorim; Costa, Ana Filipa; Ramos, Carina; Torres, Carlos; Minondo, Mauricio; Bártolo, Paulo J.; Nunes, Amanda; Kemmoku, Daniel; da Silva, Jorge Vicente Lopes. "Additive Manufacturing Systems for Medical Applications: Case Studies". In Additive Manufacturing – Developments in Training and Education, 187-209. Springer International Publishing, 2018.
    Published • 10.1007/978-3-319-76084-1_13
  36. Bartolo, Paulo. "Topology and material optimization of architectural components". In Challenges for Technology Innovation: An Agenda for the Future. Taylor & Francis, 2017.
    Published
  37. Bartolo, Paulo. "Designing cork-based functionally graded concrete walls". Taylor & Francis Group, 2017.
    Published
  38. Bartolo, Paulo. "3D PCL/graphene scaffold for bone tissue engineering". Taylor & Francis Group, 2017.
    Published
  39. Bartolo, Paulo. "Morphological, mechanical and biological assessment of bio ceramic scaffolds for bone regeneration". Taylor & Francis Group, 2017.
    Published
  40. Bartolo, Paulo. "Influence of pore size and fibre orientation on stem cell proliferation in a 3D printed polycaprolactone scaffold". Taylor & Francis Group, 2017.
    Published
  41. Bartolo, Paulo. "Novel metallic bone fixation implants with reduced stiffness". Taylor & Francis Group, 2017.
    Published
  42. Bartolo, Paulo. "Trends in Mesenchymal Stem Cells' Applications for Skeletal Muscle Repair and Regeneration". 2015.
    10.5772/60919
  43. Bartolo, Paulo. "Permeability Evaluation of Flow Behaviors Within Perfusion Bioreactors". 2015.
    10.1007/978-3-319-09411-3_80
  44. Bartolo, Paulo. "Structural Shear Stress Evaluation of Triple Periodic Minimal Surfaces". 2015.
    10.1007/978-3-319-15799-3_1
  45. Pereira, Rúben F.; Bártolo, Paulo J.. "Photocrosslinkable Materials for the Fabrication of Tissue-Engineered Constructs by Stereolithography". In Computational Methods in Applied Sciences, 149-178. Springer Netherlands, 2014.
    10.1007/978-94-007-7073-7_8
Edited book
  1. Bartolo, Paulo. Handbook of construction safety, health and well-being in industry 4.0 era. Routledge (Taylor & Francis Group). 2023.
    Published • Editor
  2. Bartolo, Paulo. Bio-Materials and Prototyping Applications in Medicine. Cham, Switzerland: Springer International Publishing. 2021.
    Published • 10.1007/978-3-030-35876-1 • Editor
  3. Bartolo, Paulo. Virtual Prototyping & Bio Manufacturing in Medical Applications. Cham, Switzerland: Springer International Publishing. 2021.
    Published • 10.1007/978-3-030-35880-8 • Editor
  4. Industry 4.0 – Shaping The Future of The Digital World. Londres, United Kingdom: CRC Press. 2020.
    Published • 10.1201/9780367823085 • Editor
  5. Bartolo, Paulo. New developments in tissue engineering and regeneration. 2019.
Journal article
  1. Omar, Abdalla M.; Hassan, Mohamed H.; Daskalakis, Evangelos; Smith, Albert; Dooghue, Jack; Mirihanage, Wajira; Bartolo, Paulo J. D. S.. "Biomimetic dual sensing polymer nanocomposite for biomedical applications". Frontiers in Bioengineering and Biotechnology 12 (2024): 1-10. http://dx.doi.org/10.3389/fbioe.2024.1322753.
    Open access • Published • 10.3389/fbioe.2024.1322753
  2. Tsirogiannis, Evangelos; Daskalakis, Evangelos; Vogiatzis, Christos; Psarommatis, Foivos; Bartolo, Paulo. "Advanced composite armor protection systems for military vehicles: Design methodology, ballistic testing, and comparison". Composites Science and Technology (2024): 110486. http://dx.doi.org/10.1016/j.compscitech.2024.110486.
    Open access • In press • 10.1016/j.compscitech.2024.110486
  3. Hou, Yanhao; Wang, Weiguang; Bartolo, Paulo. "The effect of graphene and graphene oxide induced reactive oxygen species on polycaprolactone scaffolds for bone cancer applications". Materials Today Bio 24 (2024): 100886. http://dx.doi.org/10.1016/j.mtbio.2023.100886.
    Open access • Published • 10.1016/j.mtbio.2023.100886
  4. Alhijaily, Abdullah; Kilic, Zekai Murat; Bartolo, Paulo. "Development of a novel gantry system for cooperative printing of plastic materials". Virtual and Physical Prototyping 19 1 (2024): e2305208. http://dx.doi.org/10.1080/17452759.2024.2305208.
    Open access • Published • 10.1080/17452759.2024.2305208
  5. Li, Huijun; Chng, Chin Boon; Zheng, Han; Wu, Mao See; Bartolo, Paulo Jorge Da Silva; Qi, H. Jerry; Tan, Yu Jun; Zhou, Kun. "Self-Healable and 4D Printable Hydrogel for Stretchable Electronics". Advanced Science 2023 (2024): 2305702. http://dx.doi.org/10.1002/advs.202305702.
    Open access • Published • 10.1002/advs.202305702
  6. Acar, Anil A.; Daskalakis, Evangelos; Bartolo, Paulo; Weightman, Andrew; Cooper, Glen; Blunn, Gordon; Koc, Bahattin. "Customized scaffolds for large bone defects using 3D-printed modular blocks from 2D-medical images". Bio-Design and Manufacturing 7 1 (2023): 74-87. http://dx.doi.org/10.1007/s42242-023-00259-x.
    Published • 10.1007/s42242-023-00259-x
  7. Alhijaily, Abdullah; Kilic, Zekai Murat; Bartolo, Paulo. "Online cooperative printing by mobile robots". Virtual and Physical Prototyping 18 1 (2023): e2276257. http://dx.doi.org/10.1080/17452759.2023.2276257.
    Open access • Published • 10.1080/17452759.2023.2276257
  8. Babalola, Akinloluwa; Manu, Patrick; Cheung, Clara; Yunusa-Kaltungo, Akilu; Bartolo, Paulo. "Applications of immersive technologies for occupational safety and health training and education: A systematic review". Safety Science 166 (2023): 106214. http://dx.doi.org/10.1016/j.ssci.2023.106214.
    Open access • Published • 10.1016/j.ssci.2023.106214
  9. Nalesso, Paulo Roberto Lopes; Vedovatto, Matheus; Gregório, Julia Eduarda Schneider; Huang, Boyang; Vyas, Cian; Santamaria-Jr, Milton; Bártolo, Paulo; Caetano, Guilherme Ferreira. "Early In Vivo Osteogenic and Inflammatory Response of 3D Printed Polycaprolactone/Carbon Nanotube/Hydroxyapatite/Tricalcium Phosphate Composite Scaffolds". Polymers 15 13 (2023): 2952. http://dx.doi.org/10.3390/polym15132952.
    Open access • Published • 10.3390/polym15132952
  10. Tartici, Idil; Kilic, Zekai Murat; Bartolo, Paulo. "A Systematic Literature Review: Industry 4.0 Based Monitoring and Control Systems in Additive Manufacturing". Machines 11 7 (2023): 712-19 pages. http://dx.doi.org/10.3390/machines11070712.
    Open access • Published • 10.3390/machines11070712
  11. Ates, Gokhan; Bartolo, Paulo. "Computational fluid dynamics for the optimization of internal bioprinting parameters and mixing conditions". International Journal of Bioprinting 9 6 (2023): 0219. http://dx.doi.org/10.36922/ijb.0219.
    Open access • Published • 10.36922/ijb.0219
  12. H. Hassan, Mohamed; M. Omar, Abdalla; Daskalakis, Evangelos; Grieve, Bruce; Bartolo, Paulo J.D.S.. "Electrospinning polyethylene terephthalate glycol". International Journal of Bioprinting 9 6 (2023): 0024. http://dx.doi.org/10.36922/ijb.0024.
    Open access • Published • 10.36922/ijb.0024
  13. Wang, Yaxin; Pereira, Rúben F; Peach, Chris; Huang, Boyang; Vyas, Cian; Bartolo, Paulo. "Robotic in situ bioprinting for cartilage tissue engineering". International Journal of Extreme Manufacturing 5 3 (2023): 032004-25 pages. http://dx.doi.org/10.1088/2631-7990/acda67.
    Open access • Published • 10.1088/2631-7990/acda67
  14. Daskalakis, Evangelos; Hassan, Mohamed H.; Omar, Abdalla M.; Cooper, Glen; Weightman, Andrew; Bartolo, Paulo. "Rheological behaviour of different composite materials for additive manufacturing of 3D bone scaffolds". Journal of Materials Research and Technology 24 (2023): 3670-3682. http://dx.doi.org/10.1016/j.jmrt.2023.03.231.
    Open access • Published • 10.1016/j.jmrt.2023.03.231
  15. Tsirogiannis, Evangelos Ch.; Daskalakis, Evangelos; Hassan, Mohamed H.; Omar, Abdalla M.; Bartolo, Paulo. "Ballistic design and testing of a composite armour reinforced by CNTs suitable for armoured vehicles". Defence Technology (2023): http://dx.doi.org/10.1016/j.dt.2023.04.013.
    Open access • In press • 10.1016/j.dt.2023.04.013
  16. Yang, Jiong; Yue, Hexin; Mirihanage, Wajira; Bartolo, Paulo. "Multi-Stage Thermal Modelling of Extrusion-Based Polymer Additive Manufacturing". Polymers 15 4 (2023): 838. http://dx.doi.org/10.3390/polym15040838.
    Open access • Published • 10.3390/polym15040838
  17. Daskalakis, Evangelos; Hassan, Mohamed H.; Omar, Abdalla M.; Acar, Anil A.; Fallah, Ali; Cooper, Glen; Weightman, Andrew; et al. "Accelerated Degradation of Poly-e-caprolactone Composite Scaffolds for Large Bone Defects". Polymers 15 3 (2023): 670. http://dx.doi.org/10.3390/polym15030670.
    Open access • Published • 10.3390/polym15030670
  18. Alhijaily, Abdullah; Kilic, Zekai Murat; Bartolo, A. N. Paulo. "Teams of robots in additive manufacturing: a review". Virtual and Physical Prototyping 18 1 (2023): http://dx.doi.org/10.1080/17452759.2022.2162929.
    Published • 10.1080/17452759.2022.2162929
  19. Helaehil, Júlia Venturini; Helaehil, Luiza Venturini; Alves, Laryssa Fernanda; Huang, Boyang; Santamaria-Jr, Milton; Bartolo, Paulo; Caetano, Guilherme Ferreira. "Electrical Stimulation Therapy and HA/TCP Composite Scaffolds Modulate the Wnt Pathways in Bone Regeneration of Critical-Sized Defects". Bioengineering 10 1 (2023): 75. http://dx.doi.org/10.3390/bioengineering10010075.
    Published • 10.3390/bioengineering10010075
  20. Babalola, Akinloluwa; Manu, Patrick; Cheung, Clara; Yunusa-Kaltungo, Akilu; Bartolo, Paulo. "A systematic review of the application of immersive technologies for safety and health management in the construction sector". Journal of Safety Research (2023): http://dx.doi.org/10.1016/j.jsr.2023.01.007.
    In press • 10.1016/j.jsr.2023.01.007
  21. Li, Boyuan; Han, Changjun; Xie, Yuxi; Bartolo, Paulo Jorge Da Silva; Zhou, Kun. "Microstructural heterogeneity induced by thermal accumulation in a nickel–aluminum–bronze alloy additively manufactured via directed energy deposition". CIRP Annals 72 1 (2023): 133-136. http://dx.doi.org/10.1016/j.cirp.2023.04.008.
    Published • 10.1016/j.cirp.2023.04.008
  22. Guo, Yuebin; Klink, Andreas; Bartolo, Paulo; Guo, Weihong Grace. "Digital twins for electro-physical, chemical, and photonic processes". CIRP Annals 72 2 (2023): 593-619. http://dx.doi.org/10.1016/j.cirp.2023.05.007.
    Published • 10.1016/j.cirp.2023.05.007
  23. Mira, Mira; Wibowo, Arie; Tajalla, Gusti Umindya Nur; Cooper, Glen; Bartolo, Paulo Jorge Da Silva; Barlian, Anggraini. "Osteogenic potential of a 3D printed silver nanoparticle-based electroactive scaffold for bone tissue engineering using human Wharton's jelly mesenchymal stem cells". Materials Advances 4 23 (2023): 6407-6418. http://dx.doi.org/10.1039/d3ma00332a.
    Open access • Published • 10.1039/d3ma00332a
  24. Daskalakis, Evangelos; Huang, Boyang; Hassan, Mohamed H.; Omar, Abdalla M.; Vyas, Cian; Acar, Anil A.; Fallah, Ali; et al. "In Vitro Evaluation of Pore Size Graded Bone Scaffolds with Different Material Composition". 3D Printing and Additive Manufacturing (2022): http://dx.doi.org/10.1089/3dp.2022.0138.
    Open access • In press • 10.1089/3dp.2022.0138
  25. Li, Boyuan; Han, Changjun; Vivegananthan, Priyanka; Kripalani, Devesh Raju; Tian, Yujia; Bartolo, Paulo Jorge Da Silva; Zhou, Kun. "Refined microstructure and ultrahigh mechanical strength of (TiN + TiB)/Ti composites in situ synthesized via laser powder bed fusion". Additive Manufacturing Letters 3 (2022): 100082. http://dx.doi.org/10.1016/j.addlet.2022.100082.
    Published • 10.1016/j.addlet.2022.100082
  26. Huang, Boyang; Wang, Yaxin; Vyas, Cian; Bartolo, Paulo. "Crystal Growth of 3D Poly(e-caprolactone) Based Bone Scaffolds and Its Effects on the Physical Properties and Cellular Interactions". Advanced Science 10 1 (2022): 2203183. http://dx.doi.org/10.1002/advs.202203183.
    Open access • Published • 10.1002/advs.202203183
  27. Zeng, Zhuohong; Wang, Chengcheng; Lek, Yung Zhen; Tian, Yuanyuan; Kandukuri, Sastry Yagnanna; Bartolo, Paulo Jorge Da Silva; Zhou, Kun. "Influence of microstructure on stainless steel 316L lattice structures fabricated by electron beam and laser powder bed fusion". Materials Science and Engineering: A 859 (2022): 144225. http://dx.doi.org/10.1016/j.msea.2022.144225.
    Published • 10.1016/j.msea.2022.144225
  28. Ding, Yifei; Vyas, Cian; Bakker, Otto; Hinduja, Srichand; Bartolo, Paulo. "Modelling and Simulation of MuCell®: The Effect of Key Processing Parameters on Cell Size and Weight Reduction". Polymers 14 19 (2022): 4215. http://dx.doi.org/10.3390/polym14194215.
    Published • 10.3390/polym14194215
  29. Hassan, Mohamed H.; Omar, Abdalla M.; Daskalakis, Evangelos; Mohamed, Abubaker A.; Boyd, Lesley A.; Blanford, Christopher; Grieve, Bruce; Bartolo, Paulo JDS.. "Multi-Layer Biosensor for Pre-Symptomatic Detection of Puccinia strifformis, the Causal Agent of Yellow Rust". Biosensors 12 10 (2022): 829. http://dx.doi.org/10.3390/bios12100829.
    Published • 10.3390/bios12100829
  30. Fallah, Ali; Altunbek, Mine; Bartolo, Paulo; Cooper, Glen; Weightman, Andrew; Blunn, Gordon; Koc, Bahattin. "3D printed scaffold design for bone defects with improved mechanical and biological properties". Journal of the Mechanical Behavior of Biomedical Materials 134 (2022): 105418. http://dx.doi.org/10.1016/j.jmbbm.2022.105418.
    Published • 10.1016/j.jmbbm.2022.105418
  31. Zhang, X.M.; Wang, Y.C.; Su, M.N.; Bartolo, P.. "Elastic–plastic buckling behaviour of beetle elytron plate with simple, fixed and flexible core supports". Thin-Walled Structures 179 (2022): 109534. http://dx.doi.org/10.1016/j.tws.2022.109534.
    Published • 10.1016/j.tws.2022.109534
  32. Dias, Juliana R.; Sousa, Aureliana; Augusto, Ana; Bártolo, Paulo J.; Granja, Pedro L.. "Electrospun Polycaprolactone (PCL) Degradation: An In Vitro and In Vivo Study". Polymers 14 16 (2022): 3397. http://dx.doi.org/10.3390/polym14163397.
    Published • 10.3390/polym14163397
  33. Yupanqui Mieles, Joel; Vyas, Cian; Aslan, Enes; Humphreys, Gavin; Diver, Carl; Bartolo, Paulo. "Honey: An Advanced Antimicrobial and Wound Healing Biomaterial for Tissue Engineering Applications". Pharmaceutics 14 8 (2022): 1663. http://dx.doi.org/10.3390/pharmaceutics14081663.
    Published • 10.3390/pharmaceutics14081663
  34. Omar, Abdalla M.; Hassan, Mohamed H.; Daskalakis, Evangelos; Ates, Gokhan; Bright, Charlie J.; Xu, Zhanyan; Powell, Emily J.; Mirihanage, Wajira; Bartolo, Paulo J. D. S.. "Geometry-Based Computational Fluid Dynamic Model for Predicting the Biological Behavior of Bone Tissue Engineering Scaffolds". Journal of Functional Biomaterials 13 3 (2022): 104. http://dx.doi.org/10.3390/jfb13030104.
    Published • 10.3390/jfb13030104
  35. Fernandes, Samantha; Vyas, Cian; Lim, Peggy; Pereira, Rúben F.; Virós, Amaya; Bártolo, Paulo. "3D Bioprinting: An Enabling Technology to Understand Melanoma". Cancers 14 14 (2022): 3535-33 pages. http://dx.doi.org/10.3390/cancers14143535.
    Open access • Published • 10.3390/cancers14143535
  36. Hou, Yanhao; Wang, Weiguang; Bartolo, Paulo. "Investigation of polycaprolactone for bone tissue engineering scaffolds: In vitro degradation and biological studies". Materials & Design 216 (2022): 110582. http://dx.doi.org/10.1016/j.matdes.2022.110582.
    Published • 10.1016/j.matdes.2022.110582
  37. Hou, Yanhao; Wang, Weiguang; Bartolo, Paulo. "Application of additively manufactured 3D scaffolds for bone cancer treatment: a review". Bio-Design and Manufacturing 5 3 (2022): 556-579. http://dx.doi.org/10.1007/s42242-022-00182-7.
    Published • 10.1007/s42242-022-00182-7
  38. Daskalakis, Evangelos; Huang, Boyang; Vyas, Cian; Acar, Anil A.; Liu, Fengyuan; Fallah, Ali; Cooper, Glen; et al. "Bone Bricks: The Effect of Architecture and Material Composition on the Mechanical and Biological Performance of Bone Scaffolds". ACS Omega (2022): http://dx.doi.org/10.1021/acsomega.1c05437.
    Published
  39. Daskalakis, Evangelos; Huang, Boyang; Vyas, Cian; Acar, Anil Ahmet; Fallah, Ali; Cooper, Glen; Weightman, Andrew; et al. "Novel 3D Bioglass Scaffolds for Bone Tissue Regeneration". Polymers 14 3 (2022): 445. http://dx.doi.org/10.3390/polym14030445.
    10.3390/polym14030445
  40. Bartolo, Paulo; Malshe, Ajay; Ferraris, Eleonora; Koc, Bahattin. "3D bioprinting: Materials, processes, and applications". CIRP Annals 71 2 (2022): 577-597. http://dx.doi.org/10.1016/j.cirp.2022.06.001.
    Published • 10.1016/j.cirp.2022.06.001
  41. Helaehil, Júlia Venturini; Lourenço, Carina Basqueira; Huang, Boyang; Helaehil, Luiza Venturini; de Camargo, Isaque Xavier; Chiarotto, Gabriela Bortolança; Santamaria-Jr, Milton; Bártolo, Paulo; Caetano, Guilherme Ferreira. "In Vivo Investigation of Polymer-Ceramic PCL/HA and PCL/ß-TCP 3D Composite Scaffolds and Electrical Stimulation for Bone Regeneration". Polymers 14 1 (2021): 65. http://dx.doi.org/10.3390/polym14010065.
    Open access • Published • 10.3390/polym14010065
  42. Aslan, Enes; Vyas, Cian; Yupanqui Mieles, Joel; Humphreys, Gavin; Diver, Carl; Bartolo, Paulo. Corresponding author: Bartolo, Paulo. "Preliminary Characterization of a Polycaprolactone-SurgihoneyRO Electrospun Mesh for Skin Tissue Engineering". Materials 15 1 (2021): 89. http://dx.doi.org/10.3390/ma15010089.
    Open access • Published • 10.3390/ma15010089
  43. Marsudi, Maradhana Agung; Ariski, Ridhola Tri; Wibowo, Arie; Cooper, Glen; Barlian, Anggraini; Rachmantyo, Riska; Bartolo, Paulo J. D. S.. Corresponding author: Wibowo, Arie. "Conductive Polymeric-Based Electroactive Scaffolds for Tissue Engineering Applications: Current Progress and Challenges from Biomaterials and Manufacturing Perspectives". International Journal of Molecular Sciences 22 21 (2021): 11543. http://dx.doi.org/10.3390/ijms222111543.
    Open access • Published • 10.3390/ijms222111543
  44. Kendall, Thomas; Diver, Carl; Gillen, David; Bartolo, Paulo. Corresponding author: Kendall, Thomas. "New insights on manipulating the material removal characteristics of Jet-Electrochemical machining through nozzle design". The International Journal of Advanced Manufacturing Technology 118 3-4 (2021): 1009-1026. http://dx.doi.org/10.1007/s00170-021-07777-x.
    Open access • Published • 10.1007/s00170-021-07777-x
  45. Alqahtani, Mohammed S.; Al-Tamimi, Abdulsalam Abdulaziz; Hassan, Mohamed H.; Liu, Fengyuan; Bartolo, Paulo. Corresponding author: Bartolo, Paulo. "Optimization of a Patient-Specific External Fixation Device for Lower Limb Injuries". Polymers 13 16 (2021): 2661. http://dx.doi.org/10.3390/polym13162661.
    Open access • Published • 10.3390/polym13162661
  46. Hou, Yanhao; Wang, Weiguang; Bartolo, Paulo. Corresponding author: Bartolo, Paulo. "A concise review on the role of selenium for bone cancer applications". Bone 149 (2021): 115974. http://dx.doi.org/10.1016/j.bone.2021.115974.
    Published • 10.1016/j.bone.2021.115974
  47. Lopes Nalesso, Paulo Roberto; Wang, Weiguang; Hou, Yanhao; Bagne, Leonardo; Pereira, Amanda Tavares; Helaehil, Julia Venturini; Moretti de Andrade, Thiago Antônio; et al. Corresponding author: Caetano, Guilherme Ferreira. "In vivo investigation of 3D printed polycaprolactone/graphene electro-active bone scaffolds". Bioprinting 24 (2021): e00164. http://dx.doi.org/10.1016/j.bprint.2021.e00164.
    Published • 10.1016/j.bprint.2021.e00164
  48. Ding, Yifei; Hassan, Mohammed H.; Bakker, Otto; Hinduja, Srichand; Bártolo, Paulo. Corresponding author: Bártolo, Paulo. "A Review on Microcellular Injection Moulding". Materials 14 15 (2021): 4209. http://dx.doi.org/10.3390/ma14154209.
    Open access • Published • 10.3390/ma14154209
  49. Dikyol, Caner; Altunbek, Mine; Bartolo, Paulo; Koc, Bahattin. Corresponding author: Koc, Bahattin. "Multimaterial bioprinting approaches and their implementations for vascular and vascularized tissues". Bioprinting 24 (2021): e00159. http://dx.doi.org/10.1016/j.bprint.2021.e00159.
    Open access • Published • 10.1016/j.bprint.2021.e00159
  50. Hassan, Mohamed H.; Vyas, Cian; Grieve, Bruce; Bartolo, Paulo. Corresponding author: Bartolo, Paulo. "Recent Advances in Enzymatic and Non-Enzymatic Electrochemical Glucose Sensing". Sensors 21 14 (2021): 4672. http://dx.doi.org/10.3390/s21144672.
    Open access • Published • 10.3390/s21144672
  51. Xu, Zhanyan; Omar, Abdalla M.; Bartolo, Paulo. Corresponding author: Bartolo, Paulo. "Experimental and Numerical Simulations of 3D-Printed Polycaprolactone Scaffolds for Bone Tissue Engineering Applications". Materials 14 13 (2021): 3546. http://dx.doi.org/10.3390/ma14133546.
    Open access • Published • 10.3390/ma14133546
  52. Ding, Junhao; Zou, Qiang; Qu, Shuo; Bartolo, Paulo; Song, Xu; Wang, Charlie C.L.. Corresponding author: Wang, Charlie C.L.. "STL-free design and manufacturing paradigm for high-precision powder bed fusion". CIRP Annals 70 1 (2021): 167-170. http://dx.doi.org/10.1016/j.cirp.2021.03.012.
    Published • 10.1016/j.cirp.2021.03.012
  53. Wang, Weiguang; Chen, Jun-Xiang; Hou, Yanhao; Bartolo, Paulo; Chiang, Wei-Hung. Corresponding author: Wang, Weiguang. "Investigations of Graphene and Nitrogen-Doped Graphene Enhanced Polycaprolactone 3D Scaffolds for Bone Tissue Engineering". Nanomaterials 11 4 (2021): 929. http://dx.doi.org/10.3390/nano11040929.
    Open access • Published • 10.3390/nano11040929
  54. Wibowo, Arie; Tajalla, Gusti U. N.; Marsudi, Maradhana A.; Cooper, Glen; Asri, Lia A.T.W.; Liu, Fengyuan; Ardy, Husaini; Bartolo, Paulo J.D.S.. Corresponding author: Bartolo, Paulo J.D.S.. "Green Synthesis of Silver Nanoparticles Using Extract of Cilembu Sweet Potatoes (Ipomoea batatas L var. Rancing) as Potential Filler for 3D Printed Electroactive and Anti-Infection Scaffolds". Molecules 26 7 (2021): 2042. http://dx.doi.org/10.3390/molecules26072042.
    Open access • Published • 10.3390/molecules26072042
  55. Daskalakis, Evangelos; Liu, Fengyuan; Huang, Boyang; Acar, Anil A.; Cooper, Glen; Weightman, Andrew; Blunn, Gordon; Koç, Bahattin; Bartolo, Paulo. Corresponding author: Bartolo, Paulo. "Investigating the Influence of Architecture and Material Composition of 3D Printed Anatomical Design Scaffolds for Large Bone Defects". International Journal of Bioprinting 7 2 (2021): 43-52. http://dx.doi.org/10.18063/ijb.v7i2.268.
    Open access • Published • 10.18063/ijb.v7i2.268
  56. Pereira, Rúben F.; Lourenço, Bianca N.; Bártolo, Paulo J.; Granja, Pedro L.. Corresponding author: Bártolo, Paulo J.. "Bioprinting a Multifunctional Bioink to Engineer Clickable 3D Cellular Niches with Tunable Matrix Microenvironmental Cues". Advanced Healthcare Materials 10 2 (2021): 2001176. http://dx.doi.org/10.1002/adhm.202001176.
    Open access • Published • 10.1002/adhm.202001176
  57. e Silva, Edney P.; Huang, Boyang; Helaehil, Júlia V.; Nalesso, Paulo R. L.; Bagne, Leonardo; de Oliveira, Maraiara A.; Albiazetti, Gabriela C. C.; et al. Corresponding author: Bártolo, Paulo. "In vivo study of conductive 3D printed PCL/MWCNTs scaffolds with electrical stimulation for bone tissue engineering". Bio-Design and Manufacturing 4 2 (2021): 190-202. http://dx.doi.org/10.1007/s42242-020-00116-1.
    Open access • Published • 10.1007/s42242-020-00116-1
  58. Vyas, Cian; Zhang, Jun; Øvrebø, Øystein; Huang, Boyang; Roberts, Iwan; Setty, Mohan; Allardyce, Benjamin; et al. Corresponding author: Bartolo, Paulo. "3D printing of silk microparticle reinforced polycaprolactone scaffolds for tissue engineering applications". Materials Science and Engineering: C 118 (2021): 111433. http://dx.doi.org/10.1016/j.msec.2020.111433.
    Open access • Published • 10.1016/j.msec.2020.111433
  59. Hassan, Mohamed H.; Omar, Abdalla M.; Daskalakis, Evangelos; Hou, Yanhao; Huang, Boyang; Strashnov, Ilya; Grieve, Bruce D.; Bártolo, Paulo. Corresponding author: Hassan, Mohamed H.. "The Potential of Polyethylene Terephthalate Glycol as Biomaterial for Bone Tissue Engineering". Polymers 12 12 (2020): 3045. http://dx.doi.org/10.3390/polym12123045.
    Open access • Published • 10.3390/polym12123045
  60. Wang, Weiguang; Hou, Yanhao; Martinez, Dean; Kurniawan, Darwin; Chiang, Wei-Hung; Bartolo, Paulo. Corresponding author: Wang, Weiguang. "Carbon Nanomaterials for Electro-Active Structures: A Review". Polymers 12 12 (2020): 2946. http://dx.doi.org/10.3390/polym12122946.
    Open access • Published • 10.3390/polym12122946
  61. Tao, Yinping; Hinduja, Srichand; Heinemann, Robert; Gomes, Anselmo; Bártolo, Paulo Jorge. Corresponding author: Bártolo, Paulo Jorge. "A Study of Physico-Mechanical Properties of Hollow Glass Bubble, Jute Fibre and Rubber Powder Reinforced Polypropylene Compounds with and without MuCell® Technology for Lightweight Applications". Polymers 12 11 (2020): 2664. http://dx.doi.org/10.3390/polym12112664.
    Open access • Published • 10.3390/polym12112664
  62. Hou, Yanhao; Wang, Weiguang; Bártolo, Paulo. Corresponding author: Wang, Weiguang. "Novel Poly(e-caprolactone)/Graphene Scaffolds for Bone Cancer Treatment and Bone Regeneration". 3D Printing and Additive Manufacturing 7 5 (2020): 222-229. http://dx.doi.org/10.1089/3dp.2020.0051.
    Open access • Published • 10.1089/3dp.2020.0051
  63. Zhu, Mingning; Lu, Dongdong; Lian, Qing; Wu, Shanglin; Wang, Wenkai; Lyon, L. Andrew; Wang, Weiguang; et al. Corresponding author: Saunders, Brian R.. "Highly swelling pH-responsive microgels for dual mode near infra-red fluorescence reporting and imaging". Nanoscale Advances 2 9 (2020): 4261-4271. http://dx.doi.org/10.1039/d0na00581a.
    Open access • Published • 10.1039/d0na00581a
  64. Lu, Zihan; Wang, Weiguang; Zhang, Jing; Bártolo, Paulo; Gong, Hugh; Li, Jiashen. Corresponding author: Li, Jiashen. "Electrospun highly porous poly(L-lactic acid)-dopamine-SiO2 fibrous membrane for bone regeneration". Materials Science and Engineering: C 117 (2020): 111359. http://dx.doi.org/10.1016/j.msec.2020.111359.
    Open access • Published • 10.1016/j.msec.2020.111359
  65. Huang, Boyang; Aslan, Enes; Jiang, Zhengyi; Daskalakis, Evangelos; Jiao, Mohan; Aldalbahi, Ali; Vyas, Cian; Bártolo, Paulo. Corresponding author: Bártolo, Paulo. "Engineered dual-scale poly (e-caprolactone) scaffolds using 3D printing and rotational electrospinning for bone tissue regeneration". Additive Manufacturing 36 (2020): 101452. http://dx.doi.org/10.1016/j.addma.2020.101452.
    Open access • Published • 10.1016/j.addma.2020.101452
  66. Vyas, Cian; Mishbak, Hussein; Cooper, Glen; Peach, Chris; Pereira, Ruben F.; Bartolo, Paulo. Corresponding author: Bartolo, Paulo. "Biological perspectives and current biofabrication strategies in osteochondral tissue engineering". Biomanufacturing Reviews 5 1 (2020): 2. http://dx.doi.org/10.1007/s40898-020-00008-y.
    Open access • Published • 10.1007/s40898-020-00008-y
  67. Al-Tamimi, Abdulsalam Abdulaziz; Hernandez, Miguel A.; Omar, Abdalla; Morales-Aldana, David Felipe; Peach, Chris; Bartolo, Paulo. Corresponding author: Bartolo, Paulo. "Mechanical, biological and tribological behaviour of fixation plates 3D printed by electron beam and selective laser melting". The International Journal of Advanced Manufacturing Technology 109 3-4 (2020): 673-688. http://dx.doi.org/10.1007/s00170-020-05676-1.
    Open access • Published • 10.1007/s00170-020-05676-1
  68. Vyas, Cian; Ates, Gokhan; Aslan, Enes; Hart, Jack; Huang, Boyang; Bartolo, Paulo. Corresponding author: Bartolo, Paulo. "Three-Dimensional Printing and Electrospinning Dual-Scale Polycaprolactone Scaffolds with Low-Density and Oriented Fibers to Promote Cell Alignment". 3D Printing and Additive Manufacturing 7 3 (2020): 105-113. http://dx.doi.org/10.1089/3dp.2019.0091.
    Open access • Published • 10.1089/3dp.2019.0091
  69. Hou, Yanhao; Wang, Weiguang; Bartolo, Paulo Jorge Da Silva. Corresponding author: Wang, Weiguang. "Investigating the Effect of Carbon Nanomaterials Reinforcing Poly(¿-Caprolactone) Scaffolds for Bone Repair Applications". International Journal of Bioprinting 6 2 (2020): 1-9. http://dx.doi.org/10.18063/ijb.v6i2.266.
    Open access • Published • 10.18063/ijb.v6i2.266
  70. Huang, Boyang; Vyas, Cian; Byun, Jae Jong; El-Newehy, Mohamed; Huang, Zhucheng; Bártolo, Paulo. Corresponding author: Bártolo, Paulo. "Aligned multi-walled carbon nanotubes with nanohydroxyapatite in a 3D printed polycaprolactone scaffold stimulates osteogenic differentiation". Materials Science and Engineering: C 108 (2020): 110374. http://dx.doi.org/10.1016/j.msec.2019.110374.
    Published • 10.1016/j.msec.2019.110374
  71. Moura, Carla Sofia; Silva, João Carlos; Faria, Sofia; Fernandes, Paulo Rui; da Silva, Cláudia Lobato; Cabral, Joaquim Manuel Sampaio; Linhardt, Robert; Bártolo, Paulo Jorge; Ferreira, Frederico Castelo. Corresponding author: Ferreira, Frederico Castelo. "Chondrogenic differentiation of mesenchymal stem/stromal cells on 3D porous poly (e-caprolactone) scaffolds: Effects of material alkaline treatment and chondroitin sulfate supplementation". Journal of Bioscience and Bioengineering 129 6 (2020): 756-764. http://dx.doi.org/10.1016/j.jbiosc.2020.01.004.
    Published • 10.1016/j.jbiosc.2020.01.004
  72. Al-Tamimi, Abdulsalam Abdulaziz; Almeida, Henrique; Bartolo, Paulo. Corresponding author: Bartolo, Paulo. "Structural optimisation for medical implants through additive manufacturing". Progress in Additive Manufacturing 5 2 (2020): 95-110. http://dx.doi.org/10.1007/s40964-020-00109-7.
    Open access • Published • 10.1007/s40964-020-00109-7
  73. Craveiro, Flávio; Nazarian, Shadi; Bartolo, Helena; Bartolo, Paulo Jorge; Pinto Duarte, José. Corresponding author: Pinto Duarte, José. "An automated system for 3D printing functionally graded concrete-based materials". Additive Manufacturing 33 (2020): 101146. http://dx.doi.org/10.1016/j.addma.2020.101146.
    Published • 10.1016/j.addma.2020.101146
  74. Wibowo, Arie; Vyas, Cian; Cooper, Glen; Qulub, Fitriyatul; Suratman, Rochim; Mahyuddin, Andi Isra; Dirgantara, Tatacipta; Bartolo, Paulo. Corresponding author: Wibowo, Arie. "3D Printing of Polycaprolactone–Polyaniline Electroactive Scaffolds for Bone Tissue Engineering". Materials 13 3 (2020): 512. http://dx.doi.org/10.3390/ma13030512.
    Open access • Published • 10.3390/ma13030512
  75. Wang, Weiguang; Lu, Zihan; Li, Jiashen; Bártolo, Paulo. Corresponding author: Wang, Weiguang. "Engineering the biological performance of hierarchical nanostructured poly(e-carpolactone) scaffolds for bone tissue engineering". CIRP Annals 69 1 (2020): 217-220. http://dx.doi.org/10.1016/j.cirp.2020.04.044.
    Published • 10.1016/j.cirp.2020.04.044
  76. Mohammed S. Alqahtani; Abdulsalam Al-Tamimi; Henrique Almeida; Glen Cooper; Paulo Bartolo. "A review on the use of additive manufacturing to produce lower limb orthoses". Progress in Additive Manufacturing (2019): https://doi.org/10.1007/s40964-019-00104-7.
    10.1007/s40964-019-00104-7
  77. Al-Tamimi, Abdulsalam Abdulaziz; Quental, Carlos; Folgado, Joao; Peach, Chris; Bartolo, Paulo. "Stress analysis in a bone fracture fixed with topology-optimised plates". Biomechanics and Modeling in Mechanobiology 19 2 (2019): 693-699. http://dx.doi.org/10.1007/s10237-019-01240-3.
    Open access • Published • 10.1007/s10237-019-01240-3
  78. Urhal, Pinar; Weightman, Andrew; Diver, Carl; Bartolo, Paulo. "Robot assisted additive manufacturing: A review". Robotics and Computer-Integrated Manufacturing 59 (2019): 335-345. http://dx.doi.org/10.1016/j.rcim.2019.05.005.
    Published • 10.1016/j.rcim.2019.05.005
  79. Silva, João C.; Moura, Carla S.; Borrecho, Gonçalo; Matos, António P. Alves; da Silva, Cláudia L.; Cabral, Joaquim M. S.; Bártolo, Paulo J.; Linhardt, Robert J.; Ferreira, Frederico Castelo. Corresponding author: Ferreira, Frederico Castelo. "Extruded Bioreactor Perfusion Culture Supports the Chondrogenic Differentiation of Human Mesenchymal Stem/Stromal Cells in 3D Porous Poly(¿-Caprolactone) Scaffolds". Biotechnology Journal 15 2 (2019): 1900078. http://dx.doi.org/10.1002/biot.201900078.
    10.1002/biot.201900078
  80. Bartolo, Paulo. "Polymer-ceramic bone bricks for tissue engineering". Transactions on Additive Manufacturing Meets Medicine (2019): https://journals.infinite-science.de/index.php/ammm/article/view/133.
    10.18416/AMMM.2019.1909S07T01
  81. Bartolo, Paulo. "Modeling of a functional brace using the finite element method". Transactions on Additive Manufacturing Meets Medicine (2019): https://journals.infinite-science.de/index.php/ammm/article/view/132.
    10.18416/AMMM.2019.1909S03P01
  82. Kendall, Thomas; Bartolo, Paulo; Gillen, David; Diver, Carl. "A review of physical experimental research in jet electrochemical machining". The International Journal of Advanced Manufacturing Technology 105 1-4 (2019): 651-667. http://dx.doi.org/10.1007/s00170-019-04099-x.
    Open access • Published • 10.1007/s00170-019-04099-x
  83. Caetano, Guilherme; Wang, Weiguang; Murashima, Adriana; Passarini, José Roberto; Bagne, Leonardo; Leite, Marcel; Hyppolito, Miguel; et al. "Tissue Constructs with Human Adipose-Derived Mesenchymal Stem Cells to Treat Bone Defects in Rats". Materials 12 14 (2019): 2268. http://dx.doi.org/10.3390/ma12142268.
    Open access • Published • 10.3390/ma12142268
  84. Mishbak, H. H.; Cooper, Glen; Bartolo, P. J.. "Development and characterization of a photocurable alginate bioink for three-dimensional bioprinting". International Journal of Bioprinting 5 2 (2019): 189. http://dx.doi.org/10.18063/ijb.v5i2.189.
    Published • 10.18063/ijb.v5i2.189
  85. Wang, Weiguang; Junior, José Roberto Passarini; Nalesso, Paulo Roberto Lopes; Musson, David; Cornish, Jillian; Mendonça, Fernanda; Caetano, Guilherme Ferreira; Bártolo, Paulo. "Engineered 3D printed poly(¿-caprolactone)/graphene scaffolds for bone tissue engineering". Materials Science and Engineering: C 100 (2019): 759-770. http://dx.doi.org/10.1016/j.msec.2019.03.047.
    Published • 10.1016/j.msec.2019.03.047
  86. Craveiro, Flávio; Duarte, José Pinto; Bartolo, Helena; Bartolo, Paulo Jorge. "Additive manufacturing as an enabling technology for digital construction: A perspective on Construction 4.0". Automation in Construction 103 (2019): 251-267. http://dx.doi.org/10.1016/j.autcon.2019.03.011.
    Published • 10.1016/j.autcon.2019.03.011
  87. Al-Tamimi, Abdulsalam Abdulaziz; Huang, Boyang; Vyas, Cian; Hernandez, Miguel; Peach, Chris; Bartolo, Paulo. "Topology optimised metallic bone plates produced by electron beam melting: a mechanical and biological study". The International Journal of Advanced Manufacturing Technology 104 1-4 (2019): 195-210. http://dx.doi.org/10.1007/s00170-019-03866-0.
    Open access • Published • 10.1007/s00170-019-03866-0
  88. Huang, Boyang; Vyas, Cian; Roberts, Iwan; Poutrel, Quentin-Arthur; Chiang, Wei-Hung; Blaker, Jonny J.; Huang, Zhucheng; Bártolo, Paulo. "Fabrication and characterisation of 3D printed MWCNT composite porous scaffolds for bone regeneration". Materials Science and Engineering: C 98 (2019): 266-278. http://dx.doi.org/10.1016/j.msec.2018.12.100.
    Published • 10.1016/j.msec.2018.12.100
  89. Wang, Weiguang; Huang, Boyang; Byun, Jae Jong; Bártolo, Paulo. "Assessment of PCL/carbon material scaffolds for bone regeneration". Journal of the Mechanical Behavior of Biomedical Materials 93 (2019): 52-60. http://dx.doi.org/10.1016/j.jmbbm.2019.01.020.
    Published • 10.1016/j.jmbbm.2019.01.020
  90. Mingning Zhu; Dongdong Lu; Shanglin Wu; Qing Lian; Wenkai Wang; L. Andrew Lyon; Weiguang Wang; Paulo Bártolo; Brian R. Saunders. "Using green emitting pH-responsive nanogels to report environmental changes within hydrogels: a nanoprobe for versatile sensing". Nanoscale (2019): https://doi.org/10.1039/C9NR00989B.
    10.1039/C9NR00989B
  91. Dias, J.R.; Baptista-Silva, S.; Sousa, A.; Oliveira, A.L.; Bártolo, P.J.; Granja, P.L.. "Biomechanical performance of hybrid electrospun structures for skin regeneration". Materials Science and Engineering: C 93 (2018): 816-827. http://dx.doi.org/10.1016/j.msec.2018.08.050.
    Published • 10.1016/j.msec.2018.08.050
  92. Liu, Fengyuan; Wang, Weiguang; Hinduja, Srichand; Bártolo, Paulo Jorge. "Hybrid Additive Manufacturing System for Zonal Plasma-Treated Scaffolds". 3D Printing and Additive Manufacturing 5 3 (2018): 205-213. http://dx.doi.org/10.1089/3dp.2018.0056.
    Published • 10.1089/3dp.2018.0056
  93. Huang, Boyang; Bártolo, Paulo Jorge. "Rheological characterization of polymer/ceramic blends for 3D printing of bone scaffolds". Polymer Testing 68 (2018): 365-378. http://dx.doi.org/10.1016/j.polymertesting.2018.04.033.
    Published • 10.1016/j.polymertesting.2018.04.033
  94. Caetano, Guilherme Ferreira; Wang, Weiguang; Chiang, Wei-Hung; Cooper, Glen; Diver, Carl; Blaker, Jonny James; Frade, Marco Andrey; Bártolo, Paulo. "3D-Printed Poly(¿-caprolactone)/Graphene Scaffolds Activated with P1-Latex Protein for Bone Regeneration". 3D Printing and Additive Manufacturing 5 2 (2018): 127-137. http://dx.doi.org/10.1089/3dp.2018.0012.
    Published • 10.1089/3dp.2018.0012
  95. Liu, Fengyuan; Hinduja, Srichand; Bártolo, Paulo. "User interface tool for a novel plasma-assisted bio-additive extrusion system". Rapid Prototyping Journal 24 2 (2018): 368-378. http://dx.doi.org/10.1108/rpj-07-2016-0115.
    Published • 10.1108/rpj-07-2016-0115
  96. Huang, Boyang; Caetano, Guilherme; Vyas, Cian; Blaker, Jonny; Diver, Carl; Bártolo, Paulo. "Polymer-Ceramic Composite Scaffolds: The Effect of Hydroxyapatite and ß-tri-Calcium Phosphate". Materials 11 1 (2018): 129. http://dx.doi.org/10.3390/ma11010129.
    Open access • Published • 10.3390/ma11010129
  97. Pereira, Rúben F.; Barrias, Cristina C.; Bártolo, Paulo J.; Granja, Pedro L.. "Cell-instructive pectin hydrogels crosslinked via thiol-norbornene photo-click chemistry for skin tissue engineering". Acta Biomaterialia 66 (2018): 282-293. http://dx.doi.org/10.1016/j.actbio.2017.11.016.
    Published • 10.1016/j.actbio.2017.11.016
  98. Liu, F.; Wang, W.; Mirihanage, W.; Hinduja, S.; Bartolo, P.J.. "A plasma-assisted bioextrusion system for tissue engineering". CIRP Annals 67 1 (2018): 229-232. http://dx.doi.org/10.1016/j.cirp.2018.04.077.
    Published • 10.1016/j.cirp.2018.04.077
  99. Bartolo, Paulo. "In situ crosslinked electrospun gelatin nanofibers for skin regeneration". European Polymer Journal (2017): http://dx.doi.org/10.1016/j.eurpolymj.2017.08.015.
    10.1016/j.eurpolymj.2017.08.015
  100. Bartolo, Paulo. "A design tool for resource-efficient fabrication of 3d-graded structural building components using additive manufacturing". Automation in Construction (2017): http://dx.doi.org/10.1016/j.autcon.2017.05.006.
    10.1016/j.autcon.2017.05.006
  101. Bartolo, Paulo. "A review of additive manufacturing for ceramic production". Rapid Prototyping Journal (2017): http://dx.doi.org/10.1108/rpj-09-2015-0128.
    10.1108/rpj-09-2015-0128
  102. Pereira, Rúben F.; Sousa, Aureliana; Barrias, Cristina C.; Bayat, Ardeshir; Granja, Pedro L.; Bártolo, Paulo J.. "Advances in bioprinted cell-laden hydrogels for skin tissue engineering". Biomanufacturing Reviews 2 1 (2017): http://dx.doi.org/10.1007/s40898-017-0003-8.
    Open access • Published • 10.1007/s40898-017-0003-8
  103. Bartolo, Paulo. "A new design of an electrospinning apparatus for tissue engineering applications". International Journal of Bioprinting (2017): http://dx.doi.org/10.18063/ijb.2017.02.002.
    10.18063/ijb.2017.02.002
  104. Ruiz-Soler, Andres; Kabinejadian, Foad; Slevin, Mark A.; Bartolo, Paulo J.; Keshmiri, Amir. "Optimisation of a Novel Spiral-Inducing Bypass Graft Using Computational Fluid Dynamics". Scientific Reports 7 1 (2017): 1865-14. http://dx.doi.org/10.1038/s41598-017-01930-x.
    Open access • Published • 10.1038/s41598-017-01930-x
  105. Bartolo, Paulo. "Comparison of Three-dimensional Extruded Poly (¿-Caprolactone) and Polylactic acid Scaffolds with Pore size Variation". Procedia CIRP (2016): http://dx.doi.org/10.1016/j.procir.2015.11.018.
    10.1016/j.procir.2015.11.018
  106. Bartolo, Paulo. "3D bioprinting of photocrosslinkable hydrogel constructs". Journal of Applied Polymer Science (2015): http://dx.doi.org/10.1002/app.42458.
    10.1002/app.42458
  107. Bartolo, Paulo. "On the mechanical properties of PLC–bioactive glass scaffolds fabricated via BioExtrusion". Materials Science and Engineering: C (2015): http://dx.doi.org/10.1016/j.msec.2015.07.063.
    10.1016/j.msec.2015.07.063
  108. Bartolo, Paulo. "3D Photo-Fabrication for Tissue Engineering and Drug Delivery". Engineering (2015): http://dx.doi.org/10.15302/j-eng-2015015.
    10.15302/j-eng-2015015
  109. Bartolo, Paulo. "Combination of 3D Extruded-based Poly (¿-caprolactone) Scaffolds with Mesenchymal Stem/Stromal Cells: Strategy Optimization". Procedia Engineering (2015): http://dx.doi.org/10.1016/j.proeng.2015.07.019.
    10.1016/j.proeng.2015.07.019
  110. Bartolo, Paulo. "Micro additive manufacturing using ultra short laser pulses". CIRP Annals (2015): http://dx.doi.org/10.1016/j.cirp.2015.05.007.
    10.1016/j.cirp.2015.05.007
  111. Bartolo, Paulo. "Osteogenic Differentiation of Adipose-derived Mesenchymal Stem Cells into Polycaprolactone (PCL) Scaffold". Procedia Engineering (2015): http://dx.doi.org/10.1016/j.proeng.2015.07.010.
    10.1016/j.proeng.2015.07.010
  112. Bartolo, Paulo. "Neuro-muscular Regeneration Using Scaffolds with Mesenchymal Stem Cells (MSCs) Isolated from Human Umbilical Cord Wharton's Jelly: Functional and Morphological Analysis Using Rat Sciatic Nerve Neurotmesis Injury Model". Procedia Engineering (2015): http://dx.doi.org/10.1016/j.proeng.2015.07.016.
    10.1016/j.proeng.2015.07.016
  113. Bartolo, Paulo. "Production and Characterisation of PCL/ES Scaffolds for Bone Tissue Engineering". Materials Today: Proceedings (2015): http://dx.doi.org/10.1016/j.matpr.2015.04.024.
    10.1016/j.matpr.2015.04.024
  114. Bartolo, Paulo. "Mesenchymal Stem Cells and Biomaterials Systems – Perspectives for Skeletal Muscle Tissue Repair and Regeneration". Procedia Engineering (2015): http://dx.doi.org/10.1016/j.proeng.2015.07.014.
    10.1016/j.proeng.2015.07.014
  115. Bartolo, Paulo. "Combined Elastic and Shear Stress Solicitations for Topological Optimisation of Micro-CT Based Scaffolds". Procedia Engineering (2015): http://dx.doi.org/10.1016/j.proeng.2015.07.024.
    10.1016/j.proeng.2015.07.024
  116. Bartolo, Paulo. "Tensile and Shear Stress Evaluation of Schwartz Surfaces for Scaffold Design". Procedia Engineering (2015): http://dx.doi.org/10.1016/j.proeng.2015.07.025.
    10.1016/j.proeng.2015.07.025
  117. Bartolo, Paulo. "MSCs Conditioned Media and Umbilical Cord Blood Plasma Metabolomics and Composition". PLoS ONE (2014): http://dx.doi.org/10.1371/journal.pone.0113769.
    10.1371/journal.pone.0113769
  118. Bartolo, Paulo. "Collagen surface modified poly(e-caprolactone) scaffolds with improved hydrophilicity and cell adhesion properties". Materials Letters (2014): http://dx.doi.org/10.1016/j.matlet.2014.06.132.
    10.1016/j.matlet.2014.06.132
  119. Bartolo, Paulo. "Computer modelling and simulation of a bioreactor for tissue engineering". International Journal of Computer Integrated Manufacturing (2014): http://dx.doi.org/10.1080/0951192x.2013.812244.
    10.1080/0951192x.2013.812244
  120. Bartolo, Paulo. "3D printing of new biobased unsaturated polyesters by microstereo-thermal-lithography". Biofabrication (2014): http://dx.doi.org/10.1088/1758-5082/6/3/035024.
    10.1088/1758-5082/6/3/035024
  121. Bartolo, Paulo. "Design of tissue engineering scaffolds based on hyperbolic surfaces: Structural numerical evaluation". Medical Engineering & Physics (2014): http://dx.doi.org/10.1016/j.medengphy.2014.05.006.
    10.1016/j.medengphy.2014.05.006
  122. Bartolo, Paulo. "Assessment of the fatigue life of aluminium spot-welded and weld-bonded joints". Journal of Adhesion Science and Technology (2014): http://dx.doi.org/10.1080/01694243.2012.698107.
    10.1080/01694243.2012.698107
  123. Bartolo, Paulo. "Fabrication and characterisation of PCL and PCL/PLA scaffolds for tissue engineering". Rapid Prototyping Journal (2014): http://dx.doi.org/10.1108/rpj-04-2012-0037.
    10.1108/rpj-04-2012-0037
  124. Bartolo, Paulo. "Cell Therapy with Human MSCs Isolated from the Umbilical Cord Wharton Jelly Associated to a PVA Membrane in the Treatment of Chronic Skin Wounds". International Journal of Medical Sciences (2014): http://dx.doi.org/10.7150/ijms.9139.
    10.7150/ijms.9139
  125. Bartolo, Paulo. "Segmentation Algorithms for Thermal Images". Procedia Technology (2014): http://dx.doi.org/10.1016/j.protcy.2014.10.178.
    10.1016/j.protcy.2014.10.178
  126. Bartolo, Paulo. "Open Source Software for the Automatic Design of Scaffold Structures for Tissue Engineering Applications". Procedia Technology (2014): http://dx.doi.org/10.1016/j.protcy.2014.10.176.
    10.1016/j.protcy.2014.10.176
  127. Bartolo, Paulo. "Perfusion Bioreactor Fluid Flow Optimization". Procedia Technology (2014): http://dx.doi.org/10.1016/j.protcy.2014.10.139.
    10.1016/j.protcy.2014.10.139
  128. Bartolo, Paulo. "Effects of Human Mesenchymal Stem Cells Isolated from Wharton’s Jelly of the Umbilical Cord and Conditioned Media on Skeletal Muscle Regeneration Using a Myectomy Model". Stem Cells International (2014): http://dx.doi.org/10.1155/2014/376918.
    10.1155/2014/376918
  129. Bartolo, Paulo. "Promoting Nerve Regeneration in a Neurotmesis Rat Model Using Poly(DL-lactide-e-caprolactone) Membranes and Mesenchymal Stem Cells from the Wharton’s Jelly:In VitroandIn VivoAnalysis". BioMed Research International (2014): http://dx.doi.org/10.1155/2014/302659.
    10.1155/2014/302659
  130. Domingos, M; Intranuovo, F; Russo, T; Santis, R De; Gloria, A; Ambrosio, L; Ciurana, J; Bartolo, P. "The first systematic analysis of 3D rapid prototyped poly(e-caprolactone) scaffolds manufactured through BioCell printing: the effect of pore size and geometry on compressive mechanical behaviour and in vitro hMSC viability". Biofabrication 5 4 (2013): 045004. http://dx.doi.org/10.1088/1758-5082/5/4/045004.
    10.1088/1758-5082/5/4/045004
  131. Alves, N. M. F.; Bártolo, P. J.. "Virtual modelling through human vision sense". International Journal on Interactive Design and Manufacturing (IJIDeM) 1 4 (2007): 195-207. http://dx.doi.org/10.1007/s12008-007-0024-2.
    10.1007/s12008-007-0024-2
Journal issue
  1. Bartolo, Paulo; Seung Hwan Ko; Hugo Rodrigue. "Soft and Green Manufacturing and Applications". International Journal of Precision Engineering and Manufacturing - Green Technology 8 3 (2021): https://link.springer.com/journal/40684/volumes-and-issues/8-3.
    Published • Invited editor
  2. Pereira, Ruben F.; Granja, Pedro L.; Bartolo, Paulo. "3D Bioprinting and Medical Applications". Polymers 12 (2021): https://www.mdpi.com/journal/polymers/special_issues/3D_bioprinting_medical_applications.
    Published • Invited editor
  3. Bartolo, Paulo; Guilherme Caetano; Almeida, Henrique. "Electro-active scaffolds for tissue engineering". Materials 12 (2020): https://www.mdpi.com/journal/materials/special_issues/Electro-Active_Tissue.
    Published • Invited editor
  4. Bartolo, Paulo; Shaden Jaradat. "Advancements in Mechatronics and Manufacturing Propelling Industry 4.0". International Journal of Mechatronics and Manufacturing Systems 13 1 (2020): https://www.inderscience.com/info/inarticletoc.php?jcode=ijmms&year=2020&vol=13&issue=1.
    Published • Invited editor

Intellectual property

Patent
  1. David Kershaw; Bartolo, Paulo; Carl Diver; Enes Aslan; Cian Vyas; Ian Elder. 2021. "Tissue Scaffold".
    Granted/Issued
  2. Bartolo, Paulo; Carl Diver; Ian Staples; Annette Callaghan; Ian Elder; Matthew Dryden; David Kershaw; Rami Salib. 2020. "Antimicrobial fibers and compositions".
    Granted/Issued
  3. Bartolo, Paulo. 2019. "Tissue scaffold".
  4. Bartolo, Paulo. 2017. "Antimicrobial fibers and compositions".
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2023/11/22 Concept, opportunities and implications of mass customisation Mass Production to Mass Customisation, The Institute of Engineering Technology, UK
2023/11/10 Additive manufacturing an enabling technology for a smart, sustainable and resilient world
2023/11/02 Can 3D printing print cells in our body? Institute of Advanced Science (IAS@NTU) Discovery Science Seminar, NTU, Singapore
2023/11/01 New frontiers of additive manufacturing
Rapid Product Development Association of South Africa (Pretoria, South Africa)
2023/10/05 Introduction to the Singapore Centre for 3D printing
2023/09/21 An overview on the AM activities and capabilities at the Singapore Centre for 3D Printing
Tecnologico de Monterrey (Monterrey, Mexico)
2023/09/15 Designing materials and part performance through additive manufacturing
University of Minho (Guimarães, Portugal)
2023/07/20 Advances in additive manufacturing
International Institute of Welding (Singapore, Singapore)
2023/07/06 Additive manufacturing activities at Singapore
2023/07/04 Advances in 3D bioprinting Forum France Additive
France Additive (Paris, France)
2023/04 Engineering the future through additive manufacturing - biomanufacturing
2023/03/30 3D biofabrication of tissue constructs for skin tissue engineering
2023/03/14 3D biomanufacturing: applications and commercial opportunities Industry-Academic Conference
Braude College of Engineering (Karmiel, Israel)
2022/12/07 Advanced research in additive manufacturing at the Singapore Centre for 3D Printing
2022/12 Trends and Challenges in Additive Manufacturing Seminar, The University of Minho, Guimarães, Portugal
2022/11/17 Research activities@Sc3dp – Advances in Materials and Processes for Additive Manufacturing
2022/11/02 Biomanufacturing of soft and hard tissues: materials, processes and pre-clinical studies Institute of Bioengineering and Bioimaging Seminar Series, National University of Singapore, Singapore
2022/08/22 3D bioprinting: materials, processes and applications
2022/07/14 Trends in the field of additive manufacturing Additive International, Nottingham, UK
2022/06/07 Additive Manufacturing: an enabling technology of Industry 4.0 Seminar, Polytechnic Institute of Porto, Portugal
2022/06/07 Recent trends in additive manufacturing Seminar, Additive Manufacturing Centre of Excellence, Ganpat University, India
2022/05/19 Trends in additive manufacturing Seminar, Polytechnic Institute of Leiria, Portugal
2022/02 Advances in additive manufacturing for building and construction
2022/01/10 Advances in Additive Manufacturing
2022/01 Advances in Additive Manufacturing 2nd International Conference on Industry 4.0 and Advanced Manufacturing, Indian Institute of Science, Bangalore, India
2021/11/22 Strategies for sustainable manufacturing: the role of additive manufacturing
2021/11/21 Singapore Centre for 3D Printing
2021/11/19 Biofabrication approaches for tissue engineering Seminar, Mechanobiology Institute, National University of Singapore, Singapore
2021/11/17 Additive manufacturing: a platform for materials design Seminar, NEWRI, Nanyang Technological University
2021/11/03 Metal printing activities at the Singapore Centre for 3D Printing
Rapid Product Development Association of South Africa (Pretoria, South Africa)
2021/11/03 Advances in additive manufacturing: a journey from Manchester to Singapore
2021/10/29 Advances in additive manufacturing
Instituto Politécnico de Leiria (Leiria, Portugal)
2021/10/27 Industrial digitalisation of the textile/fashion industry Textiles Circularity Centre Seminar Series, UK
2021/07/31 Additive manufacturing a key technology for Industry 4.0
Indian Institute of Technology Kharagpur (Kharagpur, India)
2021/07/31 Additive manufacturing a key technology for Industry 4.0
2021/07/29 Mass personalisation strategies through additive manufacturing
Indian Institute of Science Bangalore (Bangalore, India)
2021/07/29 Mass personalisation strategies through additive manufacturing
2021/06/10 Additive manufacturing – an enabling technology of Industry 4.0 Assises Europeennes de la Fabrication Additive/European Convention for Additive Manufacturing
France Additive (Paris, France)
2021/06/10 Additive manufacturing – an enabling technology of Industry 4.0 Assises Europeanises de la Fabrication Additive/European Convention for Additive Manufacturing, Paris, France
2020/09/17 Industry 4.0: research activities at the University of Manchester Seminar, GAMBICA Conference for University and Industrial Collaboration
2020/09/10 Recent advances in biomanufacturing
Fraunhofer Research Institution for Individualized and Cell-Based Medical Engineering IMTE (Lübeck, Germany)
2020/08/28 Additive Manufacturing in Tissue Engineering
Universidade de Araraquara (Araraquara, Brazil)
2020/07/02 New trends in additive manufacturing
Aristotle University of Thessaloniki (Thessaloniki, Greece)
2019/11/18 Shaping the future through additive manufacturing Additive Manufacturing Conference (AMCTurkey), Istambul, Turkey
2019/11/04 Shaping the future through additive manufacturing and advanced materials
2019/07/24 3D Bioprinting Manchester Biomaterials Translation Workshop 2019
2019/07/12 Industry4.0@Manchester The Institute of Powder Metallurgy Research Centre (National State Key Laboratory), Central South University, Changsha, China
2019/07/12 Biomanufacturing Seminar, School of Minerals Processing and Bioengineering, Central South University, Changsha, China
2019/07/11 Bone tissue engineering through additive manufacturing Seminar, Department of Orthopaedics, The Second XiangYa Hospital, Changsha, China
2019/07/08 Personalised medicine through additive manufacturing
2019/07/04 Digital medicine: biomanufacturing for regenerative medicine Seminar, Xiamen University of Technology, China
2019/07/04 Research activities on Industry 4.0 Seminar, Xiamen University of Technology, Xiamen, China
2019/05/31 Digital Futures – research activities on Industry 4.0
2019/05/30 Additive Manufacturing@Manchester Seminar, Seoul National University, Seoul, South Korea
2018/12/01 Scaffold-based and cell-laden approaches for bone and skin tissue engineering
2018/07/24 3D printed electro-active scaffolds for bone regeneration: in vitro and in vivo assessment
2018/06/21 Bone tissue research through additive manufacturing
2018/06/13 3D food printing
2018/05/16 Fabrication of scaffolds and cell-laden constructs through extrusion-based additive manufacturing
2017/12/13 Electro-active scaffolds for bone regeneration
2017/11/24 The University of Manchester: a world-class partner for cutting-edge research and doctoral training Seminar, PoolNet, Marinha Grande, Portugal
2017/10/17 Skin wound healing
2017/10/16 Skin printing
2017/09/27 Additive manufacturing technologies: present and future
2017/09/19 Biochemistry – scaffold building for bio tissue growth Seminar, The Manchester Association of Engineers, Manchester, UK
2017/06/29 Biomanufacturing of acellular, cell-seeding and cell-laden constructs
2017/06/25 Additive biomanufacturing for regenerative medicine
2017/04/11 Additive manufacturing: future challenges
2017/04/09 3D Printing of advanced biostructures Seminar, School on Advanced Biomaterials, Ilhavo, Portugal
2017/02/01 Biomanufacturing for regenerative medicine

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2023 - Current Multi-material additive manufacturing of corrosion-resistant metal alloys via powder bed fusion for marine and offshore applications
Co-supervisor
Nanyang Technological University, Singapore
2022/08/01 - 2026/07/31 Bioprinting of hydrogel using click chemistry for cartilage tissue engineering
Supervisor
Nanyang Technological University, Singapore
2022/08/01 - 2026/07/31 3D printing of membrane for water treatment
Co-supervisor
Nanyang Technological University, Singapore
2022/01/01 - 2025/12/31 Microstructure engineering of 316L stainless steel by laser powder bed fusion (LPBF)
Supervisor
Nanyang Technological University, Singapore
2022/01/01 - 2025/12/31 Laser powder bed fusion, in-situ characterisation
Supervisor
Nanyang Technological University, Singapore
2022/01/01 - 2025/12/31 Engineering a novel 3D printed piezoelectric smart composite scaffold for large bone defects
Supervisor
Nanyang Technological University, Singapore
2021/10/01 - 2024/09/30 IoT solutions for early prevention and intervention of occupation-related COPD
Supervisor
The University of Manchester, United Kingdom
2021/10/01 - 2024/09/30 Adoption of fourth industrial technologies for management of health and safety construction site workers
Co-supervisor
The University of Manchester, United Kingdom
2021/10/01 - 2024/09/30 Low-cost digital solution for SMEs
Supervisor
The University of Manchester, United Kingdom
2020 - 2024/02/12 3D printed scaffolds for bone cancer applications
Supervisor
The University of Manchester, United Kingdom
2020 - 2024 Integrated multi-robotic assisted additive manufacturing
Supervisor
The University of Manchester, United Kingdom
2020 - 2024 4D printing through additive manufacturing
Co-supervisor
The University of Manchester, United Kingdom
2020 - 2024 Design, fabrication and validation of a 3D printing extrusion head for multiple materials
Supervisor
The University of Manchester, United Kingdom
2020/10/01 - 2023/09/30 3D printing of skin constructs for melanoma studies
Supervisor
The University of Manchester, United Kingdom
2020/10/01 - 2023/09/30 4D printing through additive manufacturing
Supervisor
The University of Manchester, United Kingdom
2020/10/01 - 2023/09/30 3D bioprinting of cartilage constructs
Supervisor
The University of Manchester, United Kingdom
2020/10/01 - 2023/09/30 Design, fabrication and validation of a 3D printing extrusion head for multiple materials
Supervisor
The University of Manchester, United Kingdom
2019 - 2023 Development of an electrospinning based biomedical membrane for wound care and surgical device coating
Supervisor
The University of Manchester, United Kingdom
2019 - 2023 Sensor printed leaf bio-sensor
Supervisor
The University of Manchester, United Kingdom
2018 - 2022/03 Novel Jet-ECM system with advanced processing capability and connectivity for next generation manufactured components
Supervisor
The University of Manchester, United Kingdom
2018 - 2022 Bone bricks: design, fabrication and assessment of composite scaffolds for large bone defects
Supervisor
The University of Manchester, United Kingdom
2018/10/01 - 2021/01 Biomanufacturing for Rapid Healing
Supervisor
 Mechanical Engineering (PhD)
The University of Manchester, United Kingdom
2020 - 2021 Design a robotic-based 3D printing system for personalized textile production
Supervisor
The University of Manchester, United Kingdom
2020 - 2021 Mechanical and transport behavior of bioinspired scaffolds
Supervisor
The University of Manchester, United Kingdom
2020 - 2021 Design of a programmable avatar for robotic additive manufacturing of textiles
Supervisor
The University of Manchester, United Kingdom
2020 - 2021 Design a novel bioreactor system
Supervisor
The University of Manchester, United Kingdom
2019 - 2021 Modelling and simulation of scaffold bioreactor
Supervisor
The University of Manchester, United Kingdom
2015/09/01 - 2020/01/06 AUTOMATED MULTI-MATERIAL FABRICATION OF BUILDINGS
Co-supervisor
 Arquitetura (PhD)
2015/10/01 - 2020/01 Development of a multi-material and multi-scale 3D bioprinted scaffold for osteochondral tissue engineering
Supervisor
 Mechanical Engineering (PhD)
The University of Manchester, United Kingdom
2019 - 2020 Conductive scaffolds for bone tissue engineering
Supervisor
The University of Manchester, United Kingdom
2019 - 2020 Modifications to the Jet-ECM system
Supervisor
The University of Manchester, United Kingdom
2018 - 2019 Remote monitoring and controlling of additive manufacturing machines using industry 4.0 principles
Supervisor
The University of Manchester, United Kingdom
2018 - 2019 Smart products for kitchen
Supervisor
The University of Manchester, United Kingdom
2018 - 2019 3D printed scaffolds for cancer applications
Supervisor
The University of Manchester, United Kingdom
2018 - 2019 Development of PCL/MWCNTs dual scale scaffolds for tissue engineering using hybrid printing
Supervisor
The University of Manchester, United Kingdom
2018 - 2019 3D printing of Perovskite solar cells
Supervisor
The University of Manchester, United Kingdom
2018 - 2019 3D printed scaffolds for cartilage applications
Supervisor
The University of Manchester, United Kingdom
2018 - 2019 3D printed scaffolds for biological nerve applications
Supervisor
The University of Manchester, United Kingdom
2008 - 2012/07/19 Comportamento mecânico de juntas soldo-coladas
Co-supervisor
Universidade de Coimbra, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2024/03/06 - Current Workshop on 3D Printing for fashion and jewellery applications (2024/03/06 - 2024/03/06)
Conference
 Nanyang Technological University Singapore Centre for 3D Printing, Singapore
2018 - Current INDUSTRY 4.0 ACADEMIA CONFERENCE The Industry 4.0 academia conference was held in Manchester on the 1st of March 2018 as part of the Industry 4.0 Summit and Factories of the Future Exhibition (https://www.industry40summit.com). Conference Chairman: Paulo Bartolo and Carl Diver (The University of Manchester) (2018)
Conference (Co-organisor)
2015 - Current CIRP CONFERENCE ON BIOMANUFACTURING This CIRP Conference follows the establishment of the CIRP collaborative working group on “Biomanufacturing” and focuses on the following topics: biofabrication (materials, processes, devices and surface treatment), biomechatronics (sensors, actuators, systems, and metrology), biodesign and assembly (modelling, design, interfaces) and medical challenges requiring new biomedical devices and manufacturing methods. (2015)
Conference
2023/11/18 - 2023/11/21 2nd International Conference on Design for 3D Printing, Jeju Island, South Korea (2023/11/18 - 2023/11/21)
Conference (Co-organisor)
2023/08/06 - 2023/08/08 International Conference on Biomaterials, Bio-Design and Manufacturing, Singapore (2023/11/08 - 2023/11/08)
Conference
2023/07/19 - 2023/07/21 4th International Conference on 3D Construction Printing, Singapore (2023/07/19 - 2023/07/21)
Conference (President of the Organising Committee)
 Nanyang Technological University Singapore Centre for 3D Printing, Singapore
2022/09/22 - 2022/09/23 International Conference on Design for 3D Printing, Singapore (2022/09/22 - 2022/09/23)
Conference (President of the Organising Committee)
 Nanyang Technological University Singapore Centre for 3D Printing, Singapore
2021/09/15 - 2021/09/17 41st International MATADOR Conference, Manchester, UK (2021/09/15 - 2021/09/17)
Conference (President of the Organising Committee)
 The University of Manchester, United Kingdom
2020/11/14 - 2020/11/15 Special Symposium on “Biomanufacturing of microtissues”, 11th World Biomaterials Congress, Glasgow, Scotland (2020/11/14 - 2020/11/15)
Symposium
2019/07/07 - 2019/07/10 40th International MATADOR Conference, Zhejiang, China (2019/07/07 - 2019/07/10)
Conference (Co-organisor)
2009 - 2015 ECCOMAS THEMATIC CONFERENCE ON TISSUE ENGINEERING (ICTE CONFERENCE) The ECCOMAS Thematic Conference on Tissue Engineering was designed to be a major forum to discuss novel ideas and strategies for tissue engineering, as well the state-of-the-art in the field Conference Chairman: Paulo Bartolo and Paulo Fernandes (University of Lisbon, Portugal) (2009 - 2015)
2003 - 2013 INTERNATIONAL CONFERENCE ON ADVANCED RESEARCH IN VIRTUAL AND PHYSICAL PROTOTYPING (VRAP CONFERENCE) The International Conference on Advanced Research in Virtual and Rapid Prototyping (VRAP), organised every two years since 2003, was designed to be a major forum for the Scientific exchange of multi disciplinary and inter-organisational aspects of virtual and physical prototyping and related areas. (2003 - 2013)
Conference (President of the Organising Committee)

Conference scientific committee

Conference name Conference host
2022 - Current 18th Global Conference on Sustainable Manufacturing, Berlin, Germany
2022 - Current II Congresso Internacional Digital em Biofabricação e Bioimpressão/II Internal Congresso on Digital Biofabrication and Bioprinting, University of Araraquara, Brazil
2022 - Current 55th CIRP Conference on Manufacturing Systems (CMS 2022), Lugano, Switzerland
2022 - Current 27th Congress of the European Society of Biomechanics (ESB2022), Porto
2021 - Current 21st CIRP Conference on Electro Physical and Chemical Machining (ISEMXXI), Zurich, Switzerland
2021 - Current AMCTurkey 2021 Additive Manufacturing Conference
2021 - Current International Conference on Additive Manufacturing Meets Medicine, Germany
2021 - Current Progress in Digital and Physical Manufacturing (ProDPM 21), Leiria, Portugal
2021 - Current 12th National Congress on Experimental Mechanics, Monte Real, Portugal
2021 - Current 20th CIRP Conference on Electro Physical and Chemical Machining (ISEM 2020), Zurich, Switzerland
2020 - Current Additive Manufacturing Meets Medicine 2020, Lubeck, Germany,
2020 - Current 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange (DSMIE-2020), Kharkiv, Ukraine
2020 - Current 19th International Conference on Machine Design and Production, Cappadocia, Turkey
2020 - Current Tissue Engineering and Regenerative Medicine International Society (TERMIS) European Chapter Meeting 2020, Manchester, UK
2020 - Current 11th CIRP Conference on Photonic Technologies (LANE 2020), Fuerth, Germany
2020 - Current 5th Fraunhofer Direct Digital Manufacturing Conference (DDMC), Berlin, Germany
2020 - Current 3rd International Conference on Materials Design and Applications 2020, Porto, Portugal
2020 - Current 17th Global Conference on Sustainable Manufacturing (GCSM), Shangai, China
2019 - Current Progress in Digital and Physical Manufacturing (ProDPM’19), Leiria, Portugal
2019 - Current 2nd International Conference on Biomaterials, Bio-Design and Manufacturing (BDMC 2019), Tianjin, China
2019 - Current 7th International Conference on Competitive Manufacturing (COMA’19), Stellenbosch, South Africa
2018 - Current 2018 IEEE International Conference on Advanced Manufacturing, Yunlin, Taiwan
2018 - Current International Conference on Additive Technologies (iCAT2018), Maribor, Slovenia
2018 - Current 3D Printing and Additive Manufacturing Technologies – AM 2018, Bengaluru, India
2018 - Current Third International Conference on Computational Methods in Manufacturing Processes (ICOMP2018), Barcelona, Spain
2018 - Current 6th International Conference on Robotics, Informatics and Intelligent Control Technology – “Future of Intelligent Innovation and Advance Robot Roadmap for Smart Industry 4.0”, Bangkok, Thailand
2018 - Current The 10th CIRP Conference on Photonic Technologies, Fuert, Germany
2018 - Current Fraunhofer Direct Digital Manufacturing Conference 2018, Berlin, Germany
2017 - Current Biofabrication 2017, International Conference on Biofabrication, Beijing, China
2017 - Current 15th Global Conference on Sustainable Manufacturing, Haifa, Israel
2017 - Current Additive Manufacturing for Products and Applications, ETH Zurich, Switzerland
2017 - Current International Symposium on Green Manufacturing and Applications (ISGMA) 2017, Gyeongju, Korea
2017 - Current 3rd CIRP Conference on BioManufacturing, Chicago, USA
2024/11/23 - 2024/11/27 20th International Conference on Precision Engineering (ICPE2024)
2024/09/09 - 2024/09/10 Additive Manufacturing Meets Medicine (AMMM2024), Fraunhofer IMTE, Lubek, Germany
2024/08/09 - 2024/08/10 30th International Conference on Computational & Experimental Engineering and Sciences
2024/06/11 - 2024/06/13 6th CIRP Conference on Biomanufacturing, Dresden, Germany
2024/05/29 - 2024/05/31 57th CIRP Conference on Manufacturing Systems, Póvoa do Varzim, Portugal
2024/05/20 - 2024/05/22 Design Commit 2024, 1st International Conference on Design & Industry 2024, Braga, Portugal
2024/04/25 - 2024/04/27 Additive Manufacturing Conference Turkey 2024 (AMC 2024), Antalya, Turkey
2024/04/03 - 2024/04/05 First International Conference on Advances in Multi-Material Additive Manufacturing, Karunya, India
2024/03/04 - 2024/03/06 International Conference on Additive Manufacturing (ICAM), Warangal, India
2024/01/11 - 2024/01/12 International Conference on Industry 4.0 and Advanced Manufacturing, Bangalore, India
2023/11/28 - 2023/11/30 First Joint International Conference on Advances in Mechanical and Aerospace Engineering, Glasgow, UK
2023/10/24 - 2023/10/26 CIRP 56th Manufacturing Systems Conference, Cape Town, South Africa
2023/04/19 - 2023/04/22 International Conference on Additive Technologies (iCAT 2023), Maribor, Slovenia
2023/03/28 - 2023/03/31 Tissue Engineering and Regenerative Medicine International Society (TERMIS) European Chapter Meeting
2023/03/15 - 2023/03/16 Fraunhofer Direct Digital Manufacturing Conference, Berlin, Germany
2022/10/28 - 2022/10/30 4th IEEE Eurasia Conference on IoT, Communication, and Engineering (ECICE 2022), Yulin, Taiwan
2022/10/06 - 2022/10/08 AMCTURKEY 2022, Additive Manufacturing International Conference
2022/10/05 - 2022/10/07 18th Global Conference on Sustainable Manufacturing, Berlin, Germany
2022/09/12 - 2022/09/15 Additive Manufacturing Meets Medicine (AMMM 2022)
2022/09/09 - 2022/09/10 11th International Conference, 3D Printing & Additive Manufacturing Technologies
2022/08/23 - 2022/08/25 International Conference of Additive Manufacturing for a Better World
2022/08/12 - 2022/08/13 4th International Conference on Manufacturing, Material Science and Engineering
2022/06/22 - 2022/06/24 V CIRP Conference on Biomanufacturing
2020/12/02 - 2020/12/04 9th International Conference on Business Sustainability (BS’20), Póvoa do Varzim, Portugal
2020/12/02 - 2020/12/04 8th International Conference on Virtual and Networked Organizations, Emergent Technologies and Tools (ViNOrg’20), Póvoa do Varzim, Portugal
2019/09/12 - 2019/09/13 International Conference on Additive Manufacturing Meets Medicine (AMMM 2019), Lubeck, Germany
2018/11/07 - 2018/11/09 Eight International Conference on Business Sustainability 2018, Póvoa de Varzim, Portugal
2018/11/07 - 2018/11/09 Seventh International Conference on Virtual and Networked Organisations (VINOrg’18), Póvoa de Varzim, Portugal
2018/09/06 - 2018/09/08 The Third International Conference on Maintenance Engineering (IncoME-III 2018), Coimbra, Portugal
2018/04/23 - 2018/04/27 19th Conference on Electro Physical and Chemical Machining, Bilbao, Spain
2017/11/15 - 2017/11/17 Seventh International Conference on Business Sustainability (BS’17), Póvoa de Varzim, Portugal
2017/11/01 - 2017/11/04 International Conference on Functional Carbons (ICFC 2017), Taipei, Taiwan

Evaluation committee

Activity description
Role 		Institution / Organization Funding entity
2023 - Current Reviewer of project
Evaluator
 European Research Council, Belgium
2023 - Current Project reviewer
Evaluator
 Fonds zur Förderung der wissenschaftlichen Forschung, Austria
2023 - Current Project reviewer
Evaluator
 Israel Science Foundation, Israel
2022 - Current Project reviewer
Evaluator
 United States-Israel Binational Science Foundation, Israel
2022 - Current Project reviewer
Evaluator
 European Science Foundation, France
2022 - Current Reviewer for the Circular Economy Hub Flexible Fund, Feasibility study proposals, UKRI National Interdisciplinary Circular Economy Research
Evaluator
 UK Research and Innovation, United Kingdom
2022 - Current Reviewer for the Challenge-based Research Funding Program, Tecnologico de Monterrey, Mexico
Evaluator
 Instituto Tecnológico y de Estudios Superiores de Monterrey, Mexico
2021 - Current Project reviewer
Evaluator
 Medical Research Council Swindon, United Kingdom
2021 - Current Project reviewer
Evaluator
 Agence nationale de la recherche, France
2021 - Current Member of the review committee of the Mechanical and Industrial Design Engineering (MIDE) at the University of Twente, The Netherlands
Member
 Universiteit Twente, Netherlands
2021 - Current Member of the committee that assessed the Mechanical and Manufacturing Engineering programme at the Waterford Institute of Technology, Ireland
Member
 Waterford Institute of Technology, Ireland
2019 - Current Member of the EPSRC panel of “Tackling global development challenges through physical sciences research – a Global Challenges Research Fund”
Member
 Engineering and Physical Sciences Research Council, United Kingdom
2018 - Current Member of the EPSRC panel of “Manufacturing Futures: Adventurous Manufacturing Research”
Member
 Engineering and Physical Sciences Research Council, United Kingdom
2021 - 2022 Member of the Industrial Engineering panel, Portuguese Agency for Assessment and Accreditation of Higher Education
Member
 Agência de Avaliação e Acreditação do Ensino Superior, Portugal

Interview (newspaper / magazine)

Activity description Newspaper / Forum
2023/12 Activities on 3D Printing for healthcare Lian He Zao Bao newspaper

Interview (tv / radio show)

Program Topic
2023/12 - Current Singapore Tonight
2023/12 - Current Capital 958 radio

Journal scientific committee

Journal title (ISSN) Publisher
2023 - Current Mechanical Manufacturing and Automation World Scientific Press
2023 - Current Smart Materials & Methods Taylor & Francis
2023 - Current International Journal of Extreme Manufacturing IOP
2023 - Current CIRP Annals - Manufacturing Technology Elsevier
2023 - Current CIRP Journal of Manufacturing Science and Technology Elsevier
2022 - Current Materials Science in Additive Manufacturing Whioce
2022 - Current Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers Elsevier
2022 - Current Smart Manufacturing World Scientific
2017 - Current Bio-Design and Manufacturing Springer
2017 - Current Applied Sciences MDPI
2016 - Current Current Opinion in Biomedical Engineering Elsevier
2016 - Current Journal of Precision Engineering and Manufacturing - Green Technology Springer
2015 - Current International Journal of Bioprinting Whioce Publishing
2013 - Current Rapid Prototyping Emerald
2011 - Current International Journal of Precision Engineering and Manufacturing Springer
2008 - 2014 Biofabrication Journal IOP
2007 - 2010 Journal on Interactive Design and Manufacturing Springer
Distinctions

Award

2022 Listed as "top 2% Scientist" by Elsevier/Stanford University in the category "single year"
2021 Best poster award at the 8th UK & Ireland Occupational Environmental Exposure Science Meeting, University of Salford, UK
2018 Carlos Roberto Rúbio award, 21º Encontro Nacional de Biomedicina, Botucatu, Brazil
2018 Best paper award at the International Conference on Progress in Additive Manufacturing (PRO-AM Conference), Singapore
2017 Best paper award at the International Conference on Engineering, Science and Applications, Tokyo, Japan
2017 Best paper award at the 39th International MATADOR Conference, Manchester, UK
2016 Best poster award at the TransMED CDT Conference, Edinburg, UK

Other distinction

2023 Listed as top 2% Scientist in the world by Elsevier/Stanford University in the category entire career. He is also among the top 0.3% in the field of Industrial Engineering & Automation and among the top 10 researchers in Singapore in the same field
2023 Listed as "top 2% Scientist" in the world by Elsevier/Stanford University in the category "entire career". He is also among the top 0.3% in the field of Industrial Engineering & Automation and among the top 10 researchers in Singapore in the same field.
2022 Listed as "top 2% Scientist" by Elsevier/Stanford University in the category "entire career"
2022 Medal of Merit from the city of Leiria (Portugal), for his career and national and international achievements
Leiria City Council, Portugal
2022 Listed as top 100,000 scientists in the world by global scholar database
2021 Listed as "top 2% Scientist" by Elsevier/Stanford University in the category "entire career"
2021 Listed as "top 2% Scientist" by Elsevier/Stanford University in the category "single year"