Ricardo João Camilo Carbas (7417-3B09-C0FC)

Curriculum Vitae

Ricardo João Camilo Carbas

Ricardo J. C. Carbas is currently a post-doctoral researcher in the Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI) - Department of Mechanical Engineering at the Faculty of Engineering of the University of Porto (FEUP). He obtained his PhD in adhesively bonded functionally graded joints from Faculty of Engineering of the University of Porto in 2013. His research activity focuses on mechanical characterisation of stuctural adhesives, experimental testing and numerical simulation of adhesive joints, with special attention to develop techniques to improve the performance of composite joints under different type of loads (quasi-static, impact or fatigue). He developed a technique of functionally graded cure by induction heating. He is editor-in-chief of Engineering Manufacturing Letters (EML) journal (FEUP). He is involved in the organization of conferences on materials and adhesive bonding: Luso-Brazilian Adhesion Conference (CLBA), International Conference on Materials Design and Applications (MDA), Advanced Joining Processes (AJP) and Ibero-American Conference on Composite Materials (IAMaC). He is editorial board member of the 'Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications', 'Journal of Advanced Joining Processes' and 'Materials'. It has six patents mainly on production methods and testing of structural adhesive bonds. He does consulting work for national (e.g. Bosch, Amtrol) and international (e.g. Honda, Nagase Chemtex, John Deere, Safran, Infineon, Henkel, etc.) companies.

Read full resume ↓

Identification

Personal identification

Full name: Ricardo João Camilo Carbas

Citation names

Carbas, Ricardo
Carbas, R. J. C.

Author identifiers

Ciência ID: 7417-3B09-C0FC
ORCID iD: 0000-0002-1933-0865
Researcher Id: I-7432-2015
Scopus Author Id: 55977169100

Knowledge fields

Engineering and Technology - Mechanical Engineering - Mechanical Engineering
Engineering and Technology - Materials Engineering - Materials Engineering

Education

	Degree	Classification
2011 Concluded	Engenharia Mecânica (Doutoramento) Major in Sem especialidade Universidade do Porto Faculdade de Engenharia, Portugal "Adhesively bonded functionally graded joints " (THESIS/DISSERTATION)
2008 Concluded	Mestrado Integrado em Engenharia Mecânica (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal "Estudo praramétrico de juntas adesivas pelo método de taguchi" (THESIS/DISSERTATION)

Affiliation

Teaching in Higher Education

	Category Host institution	Employer
2017/10/06 - Current	Invited Assistant Professor (University Teacher)	Universidade do Porto, Portugal

2017 - 2019	Invited Assistant Professor (University Teacher)	Universidade do Porto, Portugal

2017 - 2019	Invited Assistant Professor (University Teacher)	Universidade do Porto, Portugal

2016 - 2018	Invited Assistant (Polytechnic Teacher)	Instituto Politécnico do Cávado e do Ave, Portugal

2015 - 2016	Assistant (Polytechnic Teacher)	Instituto Politécnico do Cávado e do Ave Escola Superior de Tecnologia, Portugal

2015 - 2016	Assistant (Polytechnic Teacher)	Instituto Politécnico do Cávado e do Ave Escola Superior de Tecnologia, Portugal

2015 - 2016	Assistant (Polytechnic Teacher)	Instituto Politécnico do Cávado e do Ave Escola Superior de Tecnologia, Portugal

2014 - 2015	Assistant Professor (University Teacher)	Universidade Lusíada de Vila Nova de Famalicão, Portugal

2014 - 2015	Assistant Professor (University Teacher)	Universidade Lusíada de Vila Nova de Famalicão, Portugal

2014 - 2015	Assistant Professor (University Teacher)	Universidade Lusíada de Vila Nova de Famalicão, Portugal

Others

	Category Host institution	Employer
2020/09/01 - Current	Investigador auxiliar	Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

2014/07/01 - 2020/08/30	Postdoctoral researcher in a project funded by FCT. Reference: SFRH / BPD / 96992/2013 Title of project: "Novel adhesive bonding joint concept using fibre metal laminates".	Instituto de Engenharia Mecanica e Gestao Industrial, Portugal

2013/09/01 - 2014/02/28	Research fellow in a European project ENLIGHT funded by the European Commission. Project Reference: SCP2-GA-2012-314567 Project Title: Enhanced Lightweight Design (ENLIGHT)	Associated Laboratory for Energy Transports and Aeronautics, Portugal

2010/03/01 - 2013/08/31	Research fellow of a project funded by FCT. Project reference: PTDC / EME-PME / 098571/2008 Project title: 'Adhesively bonded functionally graded joints'	Associated Laboratory for Energy Transports and Aeronautics, Portugal

Projects

Grant

	Designation	Funders
2014/07/01 - 2020/08/31	NOVEL ADHESIVE BONDING JOINT CONCEPT USING FIBRE METAL LAMINATES SFRH/BPD/96992/2013	Fundação para a Ciência e a Tecnologia Concluded
2014/07/01 - 2020/08/31	NOVEL ADHESIVE BONDING JOINT CONCEPT USING FIBRE METAL LAMINATES SFRH/BPD/96992/2013	Fundação para a Ciência e a Tecnologia Concluded
2014/07/01 - 2020/08/31	NOVEL ADHESIVE BONDING JOINT CONCEPT USING FIBRE METAL LAMINATES SFRH/BPD/96992/2013	Fundação para a Ciência e a Tecnologia Concluded
2014/07/01 - 2020/08/31	NOVEL ADHESIVE BONDING JOINT CONCEPT USING FIBRE METAL LAMINATES SFRH/BPD/96992/2013	Fundação para a Ciência e a Tecnologia Concluded
2014/07/01 - 2019/06/30	NOVEL ADHESIVE BONDING JOINT CONCEPT USING FIBRE METAL LAMINATES SFRH/BPD/96992/2013 Post-doc Fellow Instituto de Engenharia Mecanica e Gestao Industrial, Portugal	Fundação para a Ciência e a Tecnologia Ongoing

Contract

	Designation	Funders
2020/09/01 - 2026/08/31	Não Disponível CEECIND/03276/2018/CP1562/CT0001 10.54499/CEECIND/03276/2018/CP1562/CT0001 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2020/09/01 - 2026/08/31	Não Disponível CEECIND/03276/2018/CP1562/CT0001 10.54499/CEECIND/03276/2018/CP1562/CT0001 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2020/09/01 - 2026/08/31	Não Disponível CEECIND/03276/2018/CP1562/CT0001 10.54499/CEECIND/03276/2018/CP1562/CT0001 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2020/09/01 - 2026/08/31	Not Available CEECIND/03276/2018/CP1562/CT0001 10.54499/CEECIND/03276/2018/CP1562/CT0001 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2021/01/01 - 2025/12/31	Laboratório Associado em Energia, Transportes e Aeroespacial LA/P/0079/2020 10.54499/LA/P/0079/2020 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal Instituto de Engenharia Mecânica, Portugal Universidade da Beira Interior, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2021/01/01 - 2025/12/31	Laboratório Associado em Energia, Transportes e Aeroespacial LA/P/0079/2020 10.54499/LA/P/0079/2020 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal Instituto de Engenharia Mecânica, Portugal Universidade da Beira Interior, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2021/01/01 - 2025/12/31	Laboratório Associado em Energia, Transportes e Aeroespacial LA/P/0079/2020 10.54499/LA/P/0079/2020 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal Instituto de Engenharia Mecânica, Portugal Universidade da Beira Interior, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2021/01/01 - 2025/12/31	Associate Laboratory of Energy, Transports and Aerospace. LA/P/0079/2020 10.54499/LA/P/0079/2020 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal Instituto de Engenharia Mecânica, Portugal Universidade da Beira Interior, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2022/01/13 - 2025/01/12	New approaches to improve the joint strength and reduce the delamination of composite adhesive joints PTDC/EME-EME/2728/2021 Principal investigator Instituto de Engenharia Mecanica e Gestao Industrial, Portugal	Fundação para a Ciência e a Tecnologia
2022/01/13 - 2025/01/12	Novas abordagens para melhorar a resistência e reduzir a delaminação das juntas adesivas com substratos compósitos PTDC/EME-EME/2728/2021 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2022/01/13 - 2025/01/12	Novas abordagens para melhorar a resistência e reduzir a delaminação das juntas adesivas com substratos compósitos PTDC/EME-EME/2728/2021 10.54499/PTDC/EME-EME/2728/2021 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2022/01/13 - 2025/01/12	Novas abordagens para melhorar a resistência e reduzir a delaminação das juntas adesivas com substratos compósitos PTDC/EME-EME/2728/2021 10.54499/PTDC/EME-EME/2728/2021 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2022/01/13 - 2025/01/12	Novas abordagens para melhorar a resistência e reduzir a delaminação das juntas adesivas com substratos compósitos PTDC/EME-EME/2728/2021 10.54499/PTDC/EME-EME/2728/2021 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2022/01/13 - 2025/01/12	New approaches to improve the joint strength and reduce the delamination of composite adhesive joints PTDC/EME-EME/2728/2021 10.54499/PTDC/EME-EME/2728/2021 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2020/01/01 - 2023/12/31	Laboratório Associado de Energia, Transportes e Aeronáutica UIDB/50022/2020 10.54499/UIDB/50022/2020 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal Instituto de Engenharia Mecânica, Portugal Universidade da Beira Interior, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2018/07/26 - 2022/07/25	Desenvolvimento de modelos constitutivos e ferramentas para o projeto estático e dinâmico de ligações adesivas estruturais PTDC/EME-EME/28351/2017 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2018/07/26 - 2022/07/25	Desenvolvimento de modelos constitutivos e ferramentas para o projeto estático e dinâmico de ligações adesivas estruturais PTDC/EME-EME/28351/2017 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2018/07/26 - 2022/07/25	Desenvolvimento de modelos constitutivos e ferramentas para o projeto estático e dinâmico de ligações adesivas estruturais PTDC/EME-EME/28351/2017 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2018/07/26 - 2022/07/25	Desenvolvimento de modelos constitutivos e ferramentas para o projeto estático e dinâmico de ligações adesivas estruturais PTDC/EME-EME/28351/2017 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2018/07/26 - 2022/07/25	Development of constitutive models and tools for the static and dynamic design of structural adhesive joints PTDC/EME-EME/28351/2017 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2018/07/02 - 2021/12/31	Juntas adesivas graduadas com aplicação de micro partículas de cortiça PTDC/EME-EME/28035/2017 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2018/07/02 - 2021/12/31	Juntas adesivas graduadas com aplicação de micro partículas de cortiça PTDC/EME-EME/28035/2017 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2018/07/02 - 2021/12/31	Juntas adesivas graduadas com aplicação de micro partículas de cortiça PTDC/EME-EME/28035/2017 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2018/07/02 - 2021/12/31	Juntas adesivas graduadas com aplicação de micro partículas de cortiça PTDC/EME-EME/28035/2017 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2018/07/02 - 2021/12/31	Adhesively bonded graded joints using magnetized cork micro particles PTDC/EME-EME/28035/2017 Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2018/07/26 - 2021/07/25	Desenvolvimento de modelos constitutivos e ferramentas para o projeto estático e dinâmico de ligações adesivas estruturais PTDC/EME-EME/28351/2017 Instituto de Engenharia Mecanica e Gestao Industrial, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2018/07/02 - 2021/07/01	Juntas adesivas graduadas com aplicação de micro partículas de cortiça PTDC/EME-EME/28035/2017 Instituto de Engenharia Mecanica e Gestao Industrial, Portugal	Fundação para a Ciência e a Tecnologia Ongoing
2014/07/01 - 2020/08/31	NOVEL ADHESIVE BONDING JOINT CONCEPT USING FIBRE METAL LAMINATES SFRH/BPD/96992/2013	Fundação para a Ciência e a Tecnologia Concluded
2019/01/01 - 2019/12/31	Laboratório Associado de Energia, Transportes e Aeronáutica UID/EMS/50022/2019 Instituto de Engenharia Mecânica, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal Universidade da Beira Interior, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2019/01/01 - 2019/12/31	Laboratório Associado de Energia, Transportes e Aeronáutica UID/EMS/50022/2019 Instituto de Engenharia Mecânica, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal Universidade da Beira Interior, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2019/01/01 - 2019/12/31	Laboratório Associado de Energia, Transportes e Aeronáutica UID/EMS/50022/2019 Instituto de Engenharia Mecânica, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal Universidade da Beira Interior, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2019/01/01 - 2019/12/31	Associate Laboratory of Energy, Transports and Aeronautics UID/EMS/50022/2019 Instituto de Engenharia Mecânica, Portugal Associated Laboratory for Energy Transports and Aeronautics, Portugal Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal Associação para o Desenvolvimento da Aerodinâmica Industrial, Portugal Universidade da Beira Interior, Portugal	Fundação para a Ciência e a Tecnologia Concluded
2013/09/01 - 2014/06/30	ENLIGHT Grant 314567 Research Fellow	Concluded
2010/03/01 - 2013/08/31	Adhesively bonded functionally graded joints PTDC/EME-PME/098571/2008 Research Fellow	Fundação para a Ciência e a Tecnologia

Outputs

Publications

Book	Mohammad Mehdi Kasaei; Beygi, Reza; Marques, EAS; Carbas, Ricardo; da Silva, Lucas F. M.. Mechanical Joining by Plastic Deformation. Netherlands: Elsevier. 2024. Accepted Mohammad Mehdi Kasaei; Beygi, Reza; Marques, EAS; Carbas, Ricardo; da Silva, Lucas F. M.. Mechanical Joining by Material Flow. Netherlands: Elsevier. 2024. Accepted Lucas Filipe Martins da Silva; Barbosa, Ana; Carbas, Ricardo; Eduardo André Sousa Marques; Akhavan-Safar, Alireza. Adhesive Bonding Technology and Testing. Wiley. 2023. Published Boutar, Y.; Naïmi, S.; Mezlini, S.; Carbas, R.J.C.; Da Silva, L.F.M.; Ben Sik Ali, M.. Investigation of Bonded Aluminium Fatigue Behaviour Using a Ductile Adhesive Employed in Bus Structures. 2022. 10.1007/978-3-030-86446-0_51 de Sousa Marques, Eduardo André; Carbas, R. J. C.; A. Akhavan-Safar; António Francisco Tenreiro; da Silva, Lucas F. M.. Structural adhesive bonding in aerospace applications. 2022. Published de Sousa Marques, Eduardo André; Carbas, R. J. C.; Borges, Catarina; da Silva, Lucas F. M.. Problemas e trabalhos em cie^ncia e engenharia dos materiais. 2022. Accepted Alireza Akhavan-Safar; Eduardo A. S. Marques; Carbas, Ricardo; da Silva, Lucas F. M.. Cohesive Zone Modelling for Fatigue Life Analysis of Adhesive Joints. Springer International Publishing. 2022. Published Carbas, R. J. C.. Introduction to Adhesive Bonding. Wiley-VCH. 2021. Published Carbas, R. J. C.. Introdução às ligações adesivas estruturais. ENGEBOOK. 2021. Dantas, M.A.; Carbas, R.J.C.; Lopes, A.M.; da Silva, C.M.; Marques, E.A.S.; da Silva, L.F.M.. Novel torsion machine to test adhesive joints. 2021. 10.1007/978-981-15-6767-4_3 Marques, E.A.S.; Nunes, P.D.P.; Akhavan-Safar, A.; Borges, C.S.P.; Carbas, R.J.C.; Machado, J.J.M.; Parente, M.P.L.; da Silva, L.F.M.. Techniques for the mechanical characterization and numerical modelling of bonded automotive structures under impact loads. 2021. 10.1007/978-981-15-6767-4_5 García De Enterría, Eduardo. Problemas e trabalhos práticos de juntas adesivas estruturais. Porto, Portugal: Publindústria. 2017. 10.12795/9788447221028
Book chapter	Farin Ramezani; João C. M. Salazar; Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "Investigation of Adherend Thickness in Thin-Ply Hybrid Laminates". 2024. 10.1007/978-3-031-48363-9_6 Eduardo A. S. Marques; Ricardo J. C. Carbas; Marcelo Costa; Lucas F. M. da Silva. "Joint Designer: A Tool for Learning and Doing". 2023. 10.1007/978-3-031-25401-7_8 Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "The Importance of Laboratorial Classes Dedicated to Advanced Joining Processes in Undergraduate Engineering Education". 2023. 10.1007/978-3-031-25401-7_9 A. Q. Barbosa; E. A. S. Marques; R. J. C. Carbas; L. F. M. da Silva. "Teaching Adhesive Bonding in Mechanical Engineering Courses". 2023. 10.1007/978-3-031-25401-7_7 Akhavan-Safar, A.; Marques, E.A.S.; Carbas, R.J.C.; da Silva, L.F.M.. "Fatigue Degradation Models". 43-66. 2022. 10.1007/978-3-030-93142-1_3 Akhavan-Safar, A.; Marques, E.A.S.; Carbas, R.J.C.; da Silva, L.F.M.. "Introduction". 1-17. 2022. 10.1007/978-3-030-93142-1_1 Akhavan-Safar, A.; Marques, E.A.S.; Carbas, R.J.C.; da Silva, L.F.M.. "Numerical Simulation". 67-88. 2022. 10.1007/978-3-030-93142-1_4 Akhavan-Safar, A.; Marques, E.A.S.; Carbas, R.J.C.; da Silva, L.F.M.. "Cohesive Zone Modelling-CZM". 19-42. 2022. 10.1007/978-3-030-93142-1_2 Akhavan-Safar, A.; Marques, E.A.S.; Carbas, R.J.C.; da Silva, L.F.M.. "Summary and Conclusions". 89-93. 2022. 10.1007/978-3-030-93142-1_5 Carbas, R. J. C.. "Techniques for the mechanical characterization and numerical modelling of bonded automotive structures under impact loads". In Industrial Applications of Adhesives, edited by Lucas Filipe Martins da Silva, 79-106. Springer, 2021. Published Carbas, R. J. C.. "Novel torsion machine to test adhesive joints". In Industrial Applications of Adhesives, edited by Lucas Filipe Martins da Silva, 31-56. Springer, 2021. Carbas, R. J. C.. "Manufacture and testing". In Advanced Joining Processes: Welding, Plastic Deformation, and Adhesion, edited by Lucas Filipe Martins da Silva. Elsevier, 2021. Carbas, R. J. C.. "Simulation". In Advanced Joining Processes: Welding, Plastic Deformation, and Adhesion, edited by Lucas Filipe Martins da Silva. Elsevier, 2021. Published Carbas, R. J. C.. "Environmental aspect and recycling issues on adhesion". In Adhesive Bonding; Science Technology and Applications, edited by Lucas Filipe Martins da Silva. Woodhead, 2021. Carbas, R. J. C.. "Stress analysis of adhesive joints". In Adhesive Bonding; Science Technology and Applications, edited by Lucas Filipe Martins da Silva. Woodhead, 2021. Published Carbas, R. J. C.. "Mechanical characterization of multi-material 3D printed specimens". In Materials design and application III, edited by Lucas Filipe Martins da Silva. Springer, 2021. Published Carbas, R. J. C.. "Joining of polymer matrix composites (PMCs) - adhesive bonding". In Encyclopedia of Materials: Composites, edited by Lucas Filipe Martins da Silva, 309-323. 2021. Published Carbas, R. J. C.. "Adhesively bonded polymer composite joints". In Encyclopedia of Materials: Plastics and Polymers, edited by Lucas Filipe Martins da Silva. Elsevier, 2021. Published Carbas, R. J. C.. "The behaviour of CFRP adhesive joints under different loading rates". In 6th International Conference on Adhesive Bonding 2021, edited by Lucas Filipe Martins da Silva, 127-142. Springer, 2021. Published Galante, J.; Ramalho, G.M.F.; dos Reis, M.Q.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "Mechanical Characterization of 3D Printed Specimens". 149-165. 2021. 10.1007/978-3-030-68277-4_11 da Silva, Catarina I.; Barbosa, Ana Q.; Marques, José B.; Carbas, Ricardo J. C.; Marques, Eduardo A. S.; Abenojar, Juana; da Silva, Lucas F. M.. "Mechanical Characterisation of Graded Single Lap Joints Using Magnetised Cork Microparticles". In Advanced Structured Materials, 153-174. Springer Singapore, 2020. 10.1007/978-981-15-2957-3_11 Carbas, Ricardo. "Techniques for the mechanical characterization and numerical modelling of bonded automotive structures under impact loads". In Applications of Adhesive Bonding. 2020. Carbas, Ricardo. "Novel torsion machine to test adhesive joints". In Applications of Adhesive Bonding. 2020. de Sousa Marques, E.A.; Akhavan-Safar, A.; Campilho, R.D.S.G.; Carbas, R.J.C.; da Silva, L.F.M.. "Advanced numerical models for predicting the load and environmentally dependent behaviour of adhesives and adhesively bonded joints". 211-244. 2019. 10.1007/978-3-030-30355-6_10 da Silva, L.F.M.; Carbas, R.J.C.; Banea, M.D.. "Failure strength tests". In Handbook of Adhesion Technology, 489-521. Springer International Publishing, 2018. Published Carbas, Ricardo. "Joining and adhesion techniques". In Advances in Manufacturing and Processing of Materials and Structures. CRC Press, 2018. Published Carbas, Ricardo. "Adhesion bonding techniques". In Advances in manufacturing and processing of materials and structures. Florida, United States: CRC Press, 2018. Published
Conference abstract	Barbosa, A. Q.; Tsokanas, P.; Delzendehrooy, F.; Pereira, R.; Carbas, R. J. C.; Marques, E. A. S.; da Silva, L. F. M.. "Benchmarking mechanical assessment of adhesive bonding and hybrid structural joining techniques implemented in maritime industries". Paper presented in 7th International Conference on Structural Adhesive Bonding, Porto, 2023. Accepted Couto, A. M. S.; Borges, C. S. P.; Tsokanas, P.; Jalali, S.; Marques, E. A. S.; Carbas, R. J. C.; da Silva, L. F. M.. "Experimental and numerical study on eco-friendly adhesive joints for the automotive industry". Paper presented in 7th International Conference on Structural Adhesive Bonding, Porto, 2023. Accepted Couto, A. M. S.; Borges, C. S. P.; Tsokanas, P.; Jalali, S.; Marques, E. A. S.; Carbas, R. J. C.; da Silva, L. F. M.. "A tool for designing eco-friendly adhesively bonded structures for vehicles". Paper presented in 7th International Conference on Structural Adhesive Bonding, Porto, 2023. Accepted Tsokanas, P.; Jalali, S.; Borges, C. S. P.; Carbas, R. J. C.; Marques, E. A. S.; da Silva, L. F. M.. "On the mechanical behavior of L- and T-shaped wooden bio-adhesive joints". Paper presented in 7th International Conference on Structural Adhesive Bonding, Porto, 2023. Accepted Kasaei, M. M.; Carbas, R. J. C.; E.A.S. Marques; da Silva, L.F.M.. Corresponding author: Kasaei, M. M.. "Hole hemming for joining metal and polymer sheets". Paper presented in 3rd International Conference on Advanced Joining Processes, Braga, 2023. Kasaei, M.M.; Marques, Eduardo; Carbas, Ricardo; da Silva, Lucas F. M.. Corresponding author: Kasaei, M.M.. "Joining of polymer and metal sheets by hole clinching". Paper presented in 1st International Conference on Engineering Manufacture, Porto, 2022.
Conference paper	Nakada, Satoshi; Furusawa, Toru; Yokoi, Eiichiro; Carbas, R; Costa, M; Marques, E; Viana, G; Silva, LFM da. "Influence of Ductility Ingredients of Structural Adhesives on Fracture Energy under Static Mixed-Mode Loading". 2017. 10.4271/2017-01-0473 Gálvez, P.; Carbas, R.J.C.; Campilho, R.; Abenojar, J.; Martínez, M.A.; Da Silva, L.F.M.. "Fracture toughness in Mode i (GIC) for ductile adhesives". 2017. 10.1088/1742-6596/843/1/012008
Conference poster	Correia, DS; Costa, ID; Marques, Eduardo; Carbas, R. J. C.; da Silva, Lucas F. M.. "Direct generation of cohesive zone laws of adhesives". Paper presented in 1ST INTERNATIONAL CONFERENCE ON MECHANICS OF SOLIDS, 2022. Borges, CSP; Brandão, R; A. Akhavan-Safar; Marques, Eduardo; Carbas, Ricardo; Ueffing, C; Weißgraeber, P; da Silva, LFM. "Influence of surfactant contamination on the mechanical properties of a silicone adhesive and an adhesive joint with aluminum substrates". Paper presented in 2nd International Conference on Industrial Applications of Adhesives 2022 (IAA 2022), 2022. Correia, DS; Marques, Eduardo; Carbas, R. J. C.; das Neves, P.J.C.; da Silva, Lucas F. M.. "Practical implementation and validation of a novel process for manufacturing milling tools using adhesive bonding". Paper presented in 2nd International Conference on Advanced Joining Processes - AJP2021, 2021. Borges, CSP; Brandão, R; A. Akhavan-Safar; Marques, Eduardo; Carbas, Ricardo; Ueffing, C; Weißgraeber, P; da Silva, LFM. "Effect of contamination on the mechanical properties of aluminum-silicone adhesive joints". Paper presented in 6th International Conference on Structural Adhesive Bonding 2021 (AB2021), 2021. Borges, CSP; A. Akhavan-Safar; Marques, Eduardo; Carbas, R. J. C.; Ueffing, C; Weißgraeber, P; da Silva, LFM. "Effect of moisture ageing on the interfacial strength of adhesive joints: An overview". Paper presented in 3rd International Conference on Materials Design and Applications 2020 (MDA 2020), 2020. Borges, CSP; Marques, Eduardo; Carbas, Ricardo; Ueffing, C; Weißgraeber, P; da Silva, LFM. "Effect of moisture and contamination on the interfacial properties of adhesive joints: A review.". Paper presented in 1st International Conference on Industrial Applications of Adhesives 2020 (IAA 2020), 2020. Borges, CSP; Nunes, Paulo DP; Akhavan-Safar, Alireza; Marques, Eduardo; Carbas, Ricardo; Alfonso, L; da Silva, LFM. "Fracture envelope of automotive adhesives under impact". Paper presented in 5th International Conference on Structural Adhesive Bonding (AB 2019), 2019. Lígia Lopes-Rocha; Pinho, Teresa; da Silva, Lucas F. M.; Carbas, Ricardo. "Effect of curing mode technique on yielding strength and strain of the dental composite resin". Paper presented in 4th International Conference on Structural Adhesive Bonding (FEUP), 2017. Carbas, Ricardo; Palmares, M.P.; da Silva, L.F.M.. "Adhesive Joints with Hybrid Laminates Aluminium-CFRP". Paper presented in MDA2016 - 1st International Conference on Materials Design and Applications, 2016. Carbas, Ricardo; da Silva, L.F.M.; Andrés, L.F.S.. "Strength of Adhesive Joints with Fibre Metal Laminates with Different Lay-up Configurations". Paper presented in CLBA2016 - 3ª Conferência Luso-Brasileira de Adesão e Adesivos, 2016. Carbas, Ricardo; da Silva, L.F.M.; Dumbrava, C.; Guimarães, A.. "Optimization of CFRP Joints with Fibre Metal Laminates". Paper presented in AB2015 - 3nd International Conference on Structural Adhesive Bonding, 2015. Carbas, Ricardo; da Silva, L.F.M.; Andrés, L.F.S.. "Functionally Graded Adhesive Joints by Graded Mixing of Nanoparticles". Paper presented in AB2015 - 3nd International Conference on Structural Adhesive Bonding, 2015. Carbas, Ricardo; da Silva, L.F.M.; Andrés, L.F.S.. "Effect of Carbon Black Nanoparticles Concentration on Mechanical Properties of an Epoxy Adhesive Cured by Dielectric Heating". Paper presented in XLVIII Congress of the Portuguese Microscopy Society, INCOMAM’14, 2014. Carbas, Ricardo; da Silva, L.F.M.; Critchlow, G.W.. "Functionally Graded Adhesive Patch Repairs in Civil Applications". Paper presented in 37th Annual Meeting of The Adhesion Society, 2014. Carbas, Ricardo; da Silva, L.F.M.; Marques, E.A.S.. "Analytical and numerical analysis of functionally graded joints". Paper presented in Adhesion ’13: the 12th International Conference on the Science and Technology of Adhesion and Adhesives, 2013. Carbas, Ricardo; da Silva, L.F.M.; Critchlow, G.W.. "Effect of post-cure on adhesively bonded functionally graded joints by induction heating". Paper presented in AB2013 - 2nd International Conference on Structural Adhesive Bonding, 2013. Viana, G.M.S.O.; Carbas, Ricardo; da Silva, L.F.M.; Critchlow, G.W.. "Functionally graded adhesive patch repairs in civil applications". Paper presented in AB2013 - 2nd International Conference on Structural Adhesive Bonding, 2013. Saldanha, D.F.S.; da Silva, L.F.M.; Carbas, Ricardo; Chaves, F.J.P.; Nomura, K.. "Mechanical Characterization of a novel epoxy adhesive". Paper presented in CLBA2012 - Conferência Luso-Brasileira de Adesão e Adesivos, 2012. Carbas, Ricardo; Marques, E.A.S.; da Silva, L.F.M.; Lopes, A.M.. "Effect of Cure Temperature on the Glass Transition Temperature and Mechanical Properties of Epoxy Adhesives". Paper presented in CLBA2012 - Conferência Luso-Brasileira de Adesão e Adesivos, 2012. Carbas, Ricardo; da Silva, L.F.M.; Barbosa, A.Q.. "Influence of Graded Cure on the Strengh of Adhesive Joints". Paper presented in AB2011 - 1st International Conference on Structural Adhesive Bonding, 2011.
Journal article	F.C. Sousa; A. Akhavan-Safar; R.J.C. Carbas; E.A.S. Marques; R. Goyal; J. Jennings; L.F.M. da Silva. "Investigation of geometric and material effects on the fatigue performance of composite and steel adhesive joints". Composite Structures (2024): https://doi.org/10.1016/j.compstruct.2024.118313. 10.1016/j.compstruct.2024.118313 D.S. Correia; R.J.F. de Sousa; P.N. Gomes; R.J.C. Carbas; E.A.S. Marques; L.F.M. da Silva. "Experimental study on toughening UV pre-curing adhesives for electrically conductive applications". International Journal of Adhesion and Adhesives (2024): https://doi.org/10.1016/j.ijadhadh.2024.103795. 10.1016/j.ijadhadh.2024.103795 Fatih Huzeyfe Öztürk; E. A. S. Marques; R. J. C. Carbas; L. F. M. da Silva. "Experimental and numerical study on mechanical behavior of 3D printed adhesive joints with polycarbonate substrates". Journal of Applied Polymer Science (2024): https://doi.org/10.1002/app.55657. 10.1002/app.55657 R.M. Carneiro Neto; E.F. Vogas; A. Akhavan-Safar; R.J.C. Carbas; E.M. Sampaio; L.F.M. da Silva. "Impact of surface preparation method on the fracture toughness of adhesive joints subjected to diverse loading modes". International Journal of Adhesion and Adhesives (2024): https://doi.org/10.1016/j.ijadhadh.2024.103763. 10.1016/j.ijadhadh.2024.103763 Hossein Malekinejad; Ricardo Carbas; Alireza Akhavan-Safar; Eduardo A. S. Marques; Cristina Maria Caldas Ferreira; Lucas da Silva. "Bio-Inspired Helicoidal Composite Structure Featuring Graded Variable Ply Pitch under Transverse Tensile Loading". Journal of Composites Science (2024): https://www.mdpi.com/2504-477X/8/6/228. 10.3390/jcs8060228 M. Ribas; A. Akhavan-Safar; R.J.C. Carbas; E.A.S. Marques; S. Wenig; L.F.M. da Silva. "Mixed mode fatigue crack growth and fatigue threshold analysis in polyurethane adhesives at elevated temperatures". International Journal of Fatigue (2024): https://doi.org/10.1016/j.ijfatigue.2024.108275. 10.1016/j.ijfatigue.2024.108275 D. Santos; A. Akhavan-Safar; R.J.C. Carbas; E.A.S. Marques; Sabine Wenig; L.F.M. da Silva. "Mode I fatigue threshold energy assessment of a polyurethane adhesive: effects of temperature and Paris law relation". The Journal of Adhesion (2024): https://doi.org/10.1080/00218464.2023.2225415. 10.1080/00218464.2023.2225415 Hossein Malekinejad; Farin Ramezani; Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "Study of CFRP Laminate Gradually Modified throughout the Thickness Using Thin Ply under Transvers Tensile Loading". Materials (2024): https://doi.org/10.3390/ma17102388. 10.3390/ma17102388 Mazaher Salamat-Talab; Ali Zeinolabedin-Beygi; Faraz Soltani; Alireza Akhavan-Safar; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Tensile Strength and Mode I Fracture Toughness of Polymer Concretes Enhanced with Glass Fibers and Metal Chips". Materials (2024): https://doi.org/10.3390/ma17092094. 10.3390/ma17092094 Daniel S. Correia; Inês D. Costa; Eduardo A. S. Marques; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Development of a Unified Specimen for Adhesive Characterization—Part 2: Experimental Study on the Mode I (mDCB) and II (ELS) Fracture Components". Materials (2024): https://doi.org/10.3390/ma17051049. 10.3390/ma17051049 Vasco DC Pires; Ricardo JC Carbas; Eduardo AS Marques; Lucas FM da Silva. "Delamination prevention of composite joints with asymmetric carbon-fiber reinforced plastic adherends". Journal of Composite Materials (2024): https://doi.org/10.1177/00219983241231062. 10.1177/00219983241231062 Pedro Morais; Alireza Akhavan-Safar; Ricardo J. C. Carbas; Eduardo A. S. Marques; Bala Karunamurthy; Lucas F. M. da Silva. "Mode I Fatigue and Fracture Assessment of Polyimide–Epoxy and Silicon–Epoxy Interfaces in Chip-Package Components". Polymers (2024): https://doi.org/10.3390/polym16040463. 10.3390/polym16040463 C.S.P. Borges; J.D.P. Sousa; E.A.S. Marques; R.J.C. Carbas; D. Chaleix; F. Gilbert; J. Pirart; et al. "Study on the influence of water ingress on the interface of high strength zinc coated steels and epoxy adhesives". International Journal of Adhesion and Adhesives (2024): https://doi.org/10.1016/j.ijadhadh.2023.103595. 10.1016/j.ijadhadh.2023.103595 António Francisco G. Tenreiro; Ricardo J. C. Carbas; Eduardo A. S. Marques; Carlos M. da Silva; António M. Lopes; Lucas F. M. da Silva. "On the design of unconventional testing machines for engineering testing – the case study of advanced joining processes unit". Journal of Machine Design and Automation Intelligence (2024): https://doi.org/10.1515/jmdai-2023-0002. 10.1515/jmdai-2023-0002 Beatriz D. Simões; Élio M. D. Fernandes; Eduardo A. S. Marques; Ricardo J. C. Carbas; Steven Maul; Patrick Stihler; Philipp Weißgraeber; Lucas F. M. da Silva. "Development of a Cyclic Creep Testing Station Tailored to Pressure-Sensitive Adhesives". Machines (2024): https://doi.org/10.3390/machines12010076. 10.3390/machines12010076 Shahin Jalali; Catarina da Silva Pereira Borges; Ricardo João Camilo Carbas; Eduardo André de Sousa Marques; Alireza Akhavan-Safar; Ana Sofia Oliveira Ferreira Barbosa; João Carlos Moura Bordado; Lucas Filipe Martins da Silva. "A Novel Technique for Substrate Toughening in Wood Single Lap Joints Using a Zero-Thickness Bio-Adhesive". Materials (2024): https://doi.org/10.3390/ma17020448. 10.3390/ma17020448 Vasco D. C. Pires; Francisco C. C. Ribeiro; Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "The reduction of stress concentrations in adhesive joints with the use of curved aluminum adherends". Mechanics of Advanced Materials and Structures (2024): https://doi.org/10.1080/15376494.2023.2299936. 10.1080/15376494.2023.2299936 Caio Adler; Pedro Morais; Alireza Akhavan-Safar; Ricardo J. C. Carbas; Eduardo A. S. Marques; Bala Karunamurthy; Lucas F. M. da Silva. "Cohesive Properties of Bimaterial Interfaces in Semiconductors: Experimental Study and Numerical Simulation Using an Inverse Cohesive Contact Approach". Materials (2024): https://doi.org/10.3390/ma17020289. 10.3390/ma17020289 R. Beygi; R.J.C. Carbas; E.A.S. Marques; A.Q. Barbosa; M.M. Kasaei; L.F.M. da Silva. "Mechanism of toughness enhancement of brittle fracture by intermittent ¿-intermetallic in Al/Cu joint made by FSW". Materials Science and Engineering: A (2024): https://doi.org/10.1016/j.msea.2023.145907. 10.1016/j.msea.2023.145907 João P. J. R. Santos; Daniel S. Correia; Eduardo A. S. Marques; Ricardo J. C. Carbas; Frida Gilbert; Lucas F. M. da Silva. "Extended Finite Element Method (XFEM) Model for the Damage Mechanisms Present in Joints Bonded Using Adhesives Doped with Inorganic Fillers". Materials (2023): https://doi.org/10.3390/ma16237499. 10.3390/ma16237499 Jamal Bidadi; Hamed Saeidi Googarchin; Alireza Akhavan-Safar; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Characterization of Bending Strength in Similar and Dissimilar Carbon-Fiber-Reinforced Polymer/Aluminum Single-Lap Adhesive Joints". Applied Sciences (2023): https://doi.org/10.3390/app132312879. 10.3390/app132312879 Vasco C. M. B. Rodrigues; Eduardo A. S. Marques; Ricardo J. C. Carbas; Michael Youngberg; Anne Dussaud; Reza Beygi; Lucas F. M. Da Silva. "Development and Study of a New Silane Based Polyurethane Hybrid Flexible Adhesive—Part 1: Mechanical Characterization". Materials (2023): https://doi.org/10.3390/ma16237299. 10.3390/ma16237299 Shahin Jalali; Catarina da Silva Pereira Borges; Ricardo João Camilo Carbas; Eduardo André de Sousa Marques; João Carlos Moura Bordado; Lucas Filipe Martins da Silva. "Characterization of Densified Pine Wood and a Zero-Thickness Bio-Based Adhesive for Eco-Friendly Structural Applications". Materials (2023): https://doi.org/10.3390/ma16227147. 10.3390/ma16227147 Vasco C. M. B. Rodrigues; Eduardo A. S. Marques; Ricardo J. C. Carbas; Michael Youngberg; Anne Dussaud; Reza Beygi; Lucas F. M. da Silva. "The Development and Study of a New Silylated Polyurethane-Based Flexible Adhesive—Part 2: Joint Testing and Numerical Modelling". Materials (2023): https://doi.org/10.3390/ma16217022. 10.3390/ma16217022 Fernando Castro Sousa; Alireza Akhavan-Safar; Ricardo J.C. Carbas; Eduardo A.S. Marques; Ana Q. Barbosa; Lucas F.M. da Silva. "Experimental study on the influence of environmental conditions on the fatigue behaviour of adhesive joints". International Journal of Fatigue (2023): https://doi.org/10.1016/j.ijfatigue.2023.107752. 10.1016/j.ijfatigue.2023.107752 Hossein Malekinejad; Ricardo J. C. Carbas; Alireza Akhavan-Safar; Eduardo A. S. Marques; Fernando Castro Sousa; Lucas F. M. da Silva. "Enhancing Fatigue Life and Strength of Adhesively Bonded Composite Joints: A Comprehensive Review". Materials (2023): https://doi.org/10.3390/ma16196468. 10.3390/ma16196468 Beatriz D. Simões; Eduardo A. S. Marques; Ricardo J. C. Carbas; Steven Maul; P. Stihler; Philipp Weißgraeber; Lucas F. M. da Silva. "Rheological and Mechanical Properties of an Acrylic PSA". Polymers (2023): https://doi.org/10.3390/polym15183843. 10.3390/polym15183843 Mohammad Mehdi Kasaei; José A. C. Pereira; Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "Ductile Fracture Prediction in Hole Hemming of Aluminum and Magnesium Sheets". Metals (2023): https://doi.org/10.3390/met13091559. 10.3390/met13091559 A. Francisco G. Tenreiro; António M. Lopes; Lucas F.M. da Silva; Ricardo J.C. Carbas. "Influence of void damage on the electromechanical impedance spectra of Single Lap Joints". NDT & E International (2023): https://doi.org/10.1016/j.ndteint.2023.102865. 10.1016/j.ndteint.2023.102865 Maria João Calheiros-Lobo; João Mário Calheiros-Lobo; Ricardo Carbas; Lucas F. M. da Silva; Teresa Pinho. "A Polymer-Infiltrated Ceramic as Base Adherent in an Experimental Specimen Model to Test the Shear Bond Strength of CAD-CAM Monolithic Ceramics Used in Resin-Bonded Dental Bridges". Coatings (2023): https://doi.org/10.3390/coatings13071218. 10.3390/coatings13071218 Maria J. P. Ribas; Alireza Akhavan-Safar; Nicolas Pigray; Ricardo J. C. Carbas; Eduardo A. S. Marques; Catarina S. P. Borges; Sabine Wenig; Lucas F. M. da Silva. "From High Strain Rates to Elevated Temperatures: Investigating Mixed-Mode Fracture Behaviour in a Polyurethane Adhesive". Polymers (2023): https://doi.org/10.3390/polym15122675. 10.3390/polym15122675 Reza Beygi; Amir Abbas Talkhabi; Majid Zarezadeh Mehrizi; Eduardo A. S. Marques; Ricardo J. C. Carbas; Lucas F. M. da Silva. "A Novel Lap-Butt Joint Design for FSW of Aluminum to Steel in Tee-Configuration: Joining Mechanism, Intermetallic Formation, and Fracture Behavior". Metals (2023): https://doi.org/10.3390/met13061027. 10.3390/met13061027 Farin Ramezani; Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "Study of Hybrid Composite Joints with Thin-Ply-Reinforced Adherends". Materials (2023): https://doi.org/10.3390/ma16114002. 10.3390/ma16114002 D. Santos; A. Akhavan-Safar; R.J.C. Carbas; E.A.S. Marques; S. Wenig; L.F.M. da Silva. "Load-control vs. displacement-control strategy in fatigue threshold analysis of adhesives: Effects of temperature". Engineering Fracture Mechanics (2023): https://doi.org/10.1016/j.engfracmech.2023.109255. 10.1016/j.engfracmech.2023.109255 Kasaei, M. M.; Beygi, R.; Carbas, R. J. C.; Marques, E. A. S.; da Silva, L. F. M.. "A review on mechanical and metallurgical joining by plastic deformation". Discover Mechanical Engineering 2 1 (2023): http://dx.doi.org/10.1007/s44245-023-00012-9. 10.1007/s44245-023-00012-9 C.S.P. Borges; R. Brandão; A. Akhavan-Safar; E.A.S. Marques; R.J.C. Carbas; C. Ueffing; P. Weißgraeber; F. Schmid; L.F.M. da Silva. "Influence of water and surfactant contamination on the mechanical and chemical properties of a silicone adhesive before and after curing". The Journal of Adhesion (2023): https://doi.org/10.1080/00218464.2022.2082291. 10.1080/00218464.2022.2082291 Rafael J. F. de Sousa; Pedro N. Gomes; Daniel S. Correia; Ricardo J. C. Carbas; Eduardo A. S. Marques; Paulo J. C. das Neves; Willian P. Afonso; Lucas F. M. da Silva. "Analysis of the Mechanical Performance and Durability of Adhesively Bonded Joints Used in the Milling Tool Industry". Applied Sciences (2023): https://doi.org/10.3390/app13084937. 10.3390/app13084937 Maria João Calheiros-Lobo; Tatiana Vieira; Ricardo Carbas; Lucas F. M. da Silva; Teresa Pinho. "Effectiveness of Self-Adhesive Resin Luting Cement in CAD-CAM Blocks—A Systematic Review and Meta-Analysis". Materials (2023): https://doi.org/10.3390/ma16082996. 10.3390/ma16082996 Daniel S. Correia; Inês D. Costa; Beatriz D. Simões; Eduardo A. S. Marques; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Development of a Unified Specimen for Adhesive Characterisation—Part 1: Numerical Study on the Mode I (mDCB) and II (ELS) Fracture Components". Materials (2023): https://doi.org/10.3390/ma16082951. 10.3390/ma16082951 Beatriz D. Simões; Élio M. D. Fernandes; Eduardo A. S. Marques; Ricardo J. C. Carbas; Steven Maul; Patrick Stihler; Philipp Weißgraeber; Lucas F. M. da Silva. "An Exploratory Study on Determining and Modeling the Creep Behavior of an Acrylic Pressure-Sensitive Adhesive". Materials (2023): https://doi.org/10.3390/ma16052029. 10.3390/ma16052029 Farin Ramezani; Ricardo J. C. Carbas; Eduardo A. S. Marques; Antonio M. Ferreira; Lucas F. M. da Silva. "A study of the fracture mechanisms of hybrid carbon fiber reinforced polymer laminates reinforced by thin-ply". Polymer Composites (2023): https://doi.org/10.1002/pc.27196. 10.1002/pc.27196 Mazaher Salamat-Talab; Alireza Akhavan-Safar; Ali Zeinolabedin-Beygi; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Effect of Through-the-Thickness Delamination Position on the R-Curve Behavior of Plain-Woven ENF Specimens". Materials (2023): https://doi.org/10.3390/ma16051811. 10.3390/ma16051811 Gabriel M. F. Ramalho; António M. Lopes; Ricardo J. C. Carbas; Lucas F. M. Da Silva. "Identifying Weak Adhesion in Single-Lap Joints Using Lamb Wave Data and Artificial Intelligence Algorithms". Applied Sciences (2023): https://doi.org/10.3390/app13042642. 10.3390/app13042642 Bernardo S. Moreira; Paulo D. P. Nunes; Carlos M. da Silva; António Francisco G. Tenreiro; António M. Lopes; Ricardo J. C. Carbas; Eduardo A. S. Marques; Marco P. L. Parente; Lucas F. M. da Silva. "Numerical Design of a Thread-Optimized Gripping System for Lap Joint Testing in a Split Hopkinson Apparatus". Sensors (2023): https://doi.org/10.3390/s23042273. 10.3390/s23042273 de Castro Lopes, F. V. B.; Akhavan-Safar, A.; Carbas, R. J. C.; Marque, E. A. S.; Goyal, R.; Jennings, J.; da Silva, L. F. M.. "The role of loading mode on the property degradation of adhesives at high temperatures". Fatigue & Fracture of Engineering Materials & Structures 46 5 (2023): 1848-1863. http://dx.doi.org/10.1111/ffe.13968. 10.1111/ffe.13968 Catarina S. P. Borges; Eduardo A. S. Marques; Ricardo J. C. Carbas; Alireza Akhavan-Safar; Christoph Ueffing; Philipp Weißgraeber; Lucas F. M. da Silva. "Effect of the Interface/Interphase on the Water Ingress Properties of Joints with PBT-GF30 and Aluminum Substrates Using Silicone Adhesive". Polymers (2023): https://doi.org/10.3390/polym15040788. 10.3390/polym15040788 F. Ramezani; R. Carbas; E. A. S. Marques; A. M. Ferreira; L. F. M. da Silva. "Study on out-of-plane tensile strength of angle-plied reinforced hybrid CFRP laminates using thin-ply". Mechanics of Advanced Materials and Structures (2023): https://doi.org/10.1080/15376494.2023.2165742. 10.1080/15376494.2023.2165742 Farin Ramezani; Beatriz D. Simões; Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "Developments in Laminate Modification of Adhesively Bonded Composite Joints". Materials (2023): https://doi.org/10.3390/ma16020568. 10.3390/ma16020568 Borges, C. S. P.; Akhavan-Safar, A.; Tsokanas, P.; Carbas, R. J. C.; Marques, E. A. S.; da Silva, L. F. M.. "From fundamental concepts to recent developments in the adhesive bonding technology: a general view". Discover Mechanical Engineering (2023): Accepted Catarina S. P. Borges; Shahin Jalali; Panayiotis Tsokanas; Eduardo A. S. Marques; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Sustainable Development Approaches through Wooden Adhesive Joints Design". Polymers (2022): https://doi.org/10.3390/polym15010089. 10.3390/polym15010089 Mael Perez; Alireza Akhavan-Safar; Ricardo J. C. Carbas; Eduardo A. S. Marques; Sabine Wenig; Lucas F. M. da Silva. "Loading Rate and Temperature Interaction Effects on the Mode I Fracture Response of a Ductile Polyurethane Adhesive Used in the Automotive Industry". Materials (2022): https://doi.org/10.3390/ma15248948. 10.3390/ma15248948 Maria João Calheiros-Lobo; Ricardo Carbas; Lucas F.M. da Silva; Teresa Pinho. "Impact of in vitro findings on clinical protocols for the adhesion of CAD-CAM blocks: A systematic integrative review and meta-analysis". The Journal of Prosthetic Dentistry (2022): https://doi.org/10.1016/j.prosdent.2022.08.024. 10.1016/j.prosdent.2022.08.024 Beatriz D. Simões; Paulo D. P. Nunes; Farin Ramezani; Ricardo J. C. Carbas; Eduardo A. S. Marques; Lucas F. M. da Silva. "Experimental and Numerical Study of Thermal Residual Stresses on Multimaterial Adherends in Single-Lap Joints". Materials (2022): https://doi.org/10.3390/ma15238541. 10.3390/ma15238541 Paulo David Pereira Nunes; Eduardo André de Sousa Marques; Alireza Akhavan-Safar; Catarina da Silva Pereira Borges; Ricardo João Camilo Carbas; Lucas Filipe Martins da Silva. "An update on the development of techniques for the determination and modelling of the impact behaviour of adhesives and bonded structures used in the automotive sector". Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering (2022): https://doi.org/10.1177/09544070221135902. 10.1177/09544070221135902 Simões, B. D.; Nunes, P. D. P.; Henriques, B. S.; Marques, E. A. S.; Carbas, R. J. C.; da Silva, L.F.M. "Determination of Mode I cohesive law of structural adhesives using the direct method". The Journal of Adhesion (2022): 1-28. http://dx.doi.org/10.1080/00218464.2022.2152677. Published • 10.1080/00218464.2022.2152677 Eduardo Marques; Ricardo Carbas; Lucas DA SILVA. "Characterizing Academic Engineering Research Groups". U.Porto Journal of Engineering (2022): https://doi.org/10.24840/2183-6493_008.006_0006. 10.24840/2183-6493_008.006_0006 Aida Faria; Daniel Correia; Eduardo Marques; Ricardo Carbas; Lucas Da Silva. "Novel Mechanical Characterization Method Applied to Non-Structural Adhesives: Adherend Material Sensitivity". Journal on Mechanics of Solids (2022): https://doi.org/10.24840/2975-8262_001-001_001799. 10.24840/2975-8262_001-001_001799 Duarte Granja; Beatriz Simões; Ricardo Carbas; Eduardo Marques; Lucas Da Silva. "Establishment of the Cohesive Law of an Epoxy Adhesive Using the Direct Method and the Effect of the Substrate Material". Journal on Mechanics of Solids (2022): https://doi.org/10.24840/2975-8262_001-001_001836. 10.24840/2975-8262_001-001_001836 Luis M. R. M. Corte-Real; Shahin Jalali; Catarina S. P. Borges; Eduardo A. S. Marques; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Development and Characterisation of Joints with Novel Densified and Wood/Cork Composite Substrates". Materials (2022): https://doi.org/10.3390/ma15207163. 10.3390/ma15207163 R Beygi; A Akhavan-Safar; R Carbas; AQ Barbosa; EAS Marques; LFM da Silva. "Utilizing a ductile damage criterion for fracture analysis of a dissimilar aluminum/steel joint made by friction stir welding". Engineering Fracture Mechanics (2022): https://doi.org/10.1016/j.engfracmech.2022.108775. 10.1016/j.engfracmech.2022.108775 João P. J. R. Santos; Daniel S. Correia; Eduardo A. S. Marques; Ricardo J. C. Carbas; Frida Gilbert; Lucas F. M. da Silva. "Characterization of the Effect of Hollow Glass Beads on the Mechanical Properties of Structural Adhesives". Materials 15 11 (2022): 3817-3817. https://doi.org/10.3390/ma15113817. 10.3390/ma15113817 Eduardo Marques; Luiz Da Silva; Ricardo J. C. Carbas; Lucas F. M. da Silva. "Recent advances in laser welding for joining polymeric components". Engineering Manufacturing Letters (2022): https://doi.org/10.24840/2795-5168_001-001_0003. 10.24840/2795-5168_001-001_0003 Ricardo Carbas. "Editorial". Engineering Manufacturing Letters (2022): https://doi.org/10.24840/2795-5168_001-001_0001. 10.24840/2795-5168_001-001_0001 J. António da Costa; A. Akhavan-Safar; E.A.S. Marques; R.J.C. Carbas; L.F.M. da Silva. "Effects of ageing frequency on the interfacial failure and tensile properties of adhesively bonded Arcan joints exposed to cyclic ageing environments". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2022): 095440892210897-095440892210897. https://doi.org/10.1177/09544089221089703. 10.1177/09544089221089703 R. Brandão; C. S. P. Borges; E. A. S. Marques; R. J. C. Carbas; A. Akhavan-Safar; P. D. P. Nunes; C. Ueffing; et al. "Effect of surfactant contamination on the properties of aluminum/silicone adhesive joints". Mechanics of Advanced Materials and Structures (2022): https://doi.org/10.1080/15376494.2022.2046217. 10.1080/15376494.2022.2046217 Antelo, J.; Akhavan-Safar, A.; Carbas, R.J.C.; Marques, E.A.S.; Goyal, R.; da Silva, L.F.M.. "Replacing welding with adhesive bonding: An industrial case study". International Journal of Adhesion and Adhesives 113 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85119380857&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2021.103064 Correia, D.S.; Carbas, R.J.C.; Marques, E.A.S.; das Neves, P.J.C.; da Silva, L.F.M.. "Experimental study on aluminium to tungsten carbide/polycrystalline diamond (WC/PCD) adhesive bonding for milling tools". International Journal of Adhesion and Adhesives 114 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85124872955&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2022.103121 Nunes, P.D.P.; Marques, E.A.S.; Carbas, R.J.C.; Akhavan-Safar, A.; da Silva, L.F.M.. "Quasi-static and intermediate test speed validation of SHPB specimens for the determination of mode I, mode II fracture toughness of structural epoxy adhesives". Engineering Fracture Mechanics 262 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85123715328&partnerID=MN8TOARS. 10.1016/j.engfracmech.2021.108231 Delzendehrooy, F.; Akhavan-Safar, A.; Barbosa, A.Q.; Beygi, R.; Cardoso, D.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "A comprehensive review on structural joining techniques in the marine industry". Composite Structures 289 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85126948157&partnerID=MN8TOARS. 10.1016/j.compstruct.2022.115490 Teixeira, P.; Akhavan-Safar, A.; Carbas, R.J.C.; da Silva, L.F.M.. "Influence of the cure state on mechanical properties of an epoxy-based adhesive: Experimental characterization and numerical simulation". Polymers for Advanced Technologies 33 4 (2022): 1163-1170. http://www.scopus.com/inward/record.url?eid=2-s2.0-85121472634&partnerID=MN8TOARS. 10.1002/pat.5589 Brandão, R.; Borges, C.S.P.; Marques, E.A.S.; Carbas, R.J.C.; Akhavan-Safar, A.; Schmid, F.; Ueffing, C.; Weißgraeber, P.; da Silva, L.F.M.. "The influence of humidity and immersion temperature on the properties and failure mode of PBT-GF30/silicone bonded joints". Composite Structures 289 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85126526481&partnerID=MN8TOARS. 10.1016/j.compstruct.2022.115421 Dantas, M.A.; Carbas, R.J.C.; Marques, E.A.S.; Kushner, D.; da Silva, L.F.M.. "Study of the permeation to ethylene glycol in flexible tubular adhesive joints". Journal of Testing and Evaluation 50 2 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85121289131&partnerID=MN8TOARS. 10.1520/JTE20210270 Correia, D.S.; Marques, E.A.S.; Carbas, R.J.C.; das Neves, P.J.C.; da Silva, L.F.M.. "Numerical optimisation of bonded joints for the manufacture of edge milling tools". Engineering Failure Analysis 134 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85122315884&partnerID=MN8TOARS. 10.1016/j.engfailanal.2021.106012 Boland, A.J.; Lopes, A.M.; Moreira da Silva, C.M.S.; Tenreiro, A.F.G.; da Silva, L.F.M.; Nunes, P.D.P.; Marques, E.A.S.; Carbas, R.J.C.. "Development of a split Hopkinson pressure bar machine for high strain rate testing of bonded joints". Journal of Testing and Evaluation 50 1 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85105712314&partnerID=MN8TOARS. 10.1520/JTE20200677 Ramezani, F.; Nunes, P.D.P.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "The joint strength of hybrid composite joints reinforced with different laminates materials". Journal of Advanced Joining Processes 5 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85123923499&partnerID=MN8TOARS. 10.1016/j.jajp.2022.100103 da Costa, J.A.; Akhavan-Safar, A.; Marques, E.A.S.; Carbas, R.J.C.; da Silva, L.F.M.. "The influence of interfacial failure on the tensile S–N response of aged Arcan joints". Journal of Applied Polymer Science 139 16 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85120620709&partnerID=MN8TOARS. 10.1002/app.51991 Delzendehrooy, F.; Akhavan-Safar, A.; Barbosa, A.Q.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "Investigation of the mechanical performance of hybrid bolted-bonded joints subjected to different ageing conditions: Effect of geometrical parameters and bolt size". Journal of Advanced Joining Processes 5 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85123004733&partnerID=MN8TOARS. 10.1016/j.jajp.2022.100098 Yongming Yang; Jun Zhao; Shishun Zhang; EAS Marques; RJC Carbas; JJM Machado; LFM da Silva. "Determination of fracture toughness of an adhesive in civil engineering and interfacial damage analysis of carbon fiber reinforced polymer-steel structure bonded joints". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2021): 146442072110213-146442072110213. https://doi.org/10.1177/14644207211021385. 10.1177/14644207211021385 R. J. C. Carbas; E. A. S. Marques; L. F. M. da Silva. "The influence of epoxy adhesive toughness on the strength of hybrid laminate adhesive joints". Applied Adhesion Science 9 1 (2021): https://doi.org/10.1186/s40563-020-00132-5. 10.1186/s40563-020-00132-5 Mateus dos Reis; Ricardo Carbas; Eduardo Marques; Lucas da Silva. "Functionally graded adhesive joints under impact loads". Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering (2021): 095440702110045-095440702110045. https://doi.org/10.1177/09544070211004505. 10.1177/09544070211004505 João Monteiro; Rui Salgado; Tomás Rocha; G. Pereira; Eduardo Marques; Ricardo Carbas; Lucas Da Silva. "Effect of Adhesive Type and Overlap Length on the Mechanical Resistance of a Simple Overlap Adhesive Joint". U.Porto Journal of Engineering (2021): https://doi.org/10.24840/2183-6493_007.003_0001. 10.24840/2183-6493_007.003_0001 J. A. da Costa; Alireza Akhavan-Safar; E. A. S. Marques; R. J. C. Carbas; L. F. M. da Silva. "Cyclic ageing of adhesive materials". The Journal of Adhesion (2021): https://doi.org/10.1080/00218464.2021.1895772. 10.1080/00218464.2021.1895772 Ricardo Carbas; Eduardo Marques; Lucas Da Silva. "Advanced Joining Processes Unit". U.Porto Journal of Engineering (2021): https://doi.org/10.24840/2183-6493_007.001_0005. 10.24840/2183-6493_007.001_0005 Ana Barbosa; Lucas Da Silva; Ana Loureiro; Eduardo Marques; Ricardo Carbas; Sílvio De Barros. "European Adhesive Bonder". U.Porto Journal of Engineering (2021): https://doi.org/10.24840/2183-6493_007.001_0006. 10.24840/2183-6493_007.001_0006 Mateus Reis; Teresa Duarte; Eduardo Marques; Catarina Borges; Fernando Sousa; Ricardo Carbas; Lucas Da Silva. "The Increase of Brazilian Students in a Portuguese Engineering School". U.Porto Journal of Engineering (2021): https://doi.org/10.24840/2183-6493_007.001_0008. 10.24840/2183-6493_007.001_0008 JA da Costa; A Akhavan-Safar; EAS Marques; RJC Carbas; LFM da Silva. "Effects of cyclic ageing on the tensile properties and diffusion coefficients of an epoxy-based adhesive". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2021): 146442072199487-146442072199487. https://doi.org/10.1177/1464420721994871. 10.1177/1464420721994871 Marques, E.A.S.; Carbas, R.J.C.. "Editorial". Journal of Advanced Joining Processes 3 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85120443875&partnerID=MN8TOARS. 10.1016/j.jajp.2021.100062 Carbas, R.J.C.; Dantas, M.A.; Marques, E.A.S.; da Silva, L.F.M.. "Effect of the adhesive thickness on butt adhesive joints under torsional loads". Journal of Advanced Joining Processes 3 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85112536492&partnerID=MN8TOARS. 10.1016/j.jajp.2021.100061 Antelo, J.; Akhavan-Safar, A.; Carbas, R.J.C.; Marques, E.A.S.; Goyal, R.; da Silva, L.F.M.. "Fatigue life evaluation of adhesive joints in a real structural component". International Journal of Fatigue 153 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85114124570&partnerID=MN8TOARS. 10.1016/j.ijfatigue.2021.106504 Khabaz-Aghdam, A.; Behjat, B.; Marques, E.A.S.; Carbas, R.J.C.; Silva, L.F.M.D.; Roghani-Mamaqani, H.. "Effect of reduced graphene oxide on mechanical behavior of an epoxy adhesive in glassy and rubbery states". Journal of Composite Materials 55 26 (2021): 3839-3848. http://www.scopus.com/inward/record.url?eid=2-s2.0-85110068945&partnerID=MN8TOARS. 10.1177/00219983211031659 da Silva, C.I.; Cunha, M.R.O.; Barbosa, A.Q.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "Functionally graded adhesive joints using magnetic microparticles with a polyurethane adhesive". Journal of Advanced Joining Processes 3 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85112525192&partnerID=MN8TOARS. 10.1016/j.jajp.2021.100048 Frascio, M.; Moroni, F.; Marques, E.; Carbas, R.; Reis, M.; Monti, M.; Avalle, M.; da Silva, L.F.M.. "Feasibility study on hybrid weld-bonded joints using additive manufacturing and conductive thermoplastic filament". Journal of Advanced Joining Processes 3 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85112567105&partnerID=MN8TOARS. 10.1016/j.jajp.2021.100046 Dantas, M.A.; Carbas, R.J.C.; Marques, E.A.S.; Kushner, D.; da Silva, L.F.M.. "Flexible tubular metal-polymer adhesive joints under torsion loading". International Journal of Adhesion and Adhesives 105 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85098153777&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2020.102787 Tenreiro, A.F.G.; Silva, C.M.; Lopes, A.M.; Nunes, P.D.P.; Carbas, R.J.C.; da Silva, L.F.M.. "Design of a new pneumatic impact actuator of a Split Hopkinson Pressure Bar (SHPB) setup for tensile and compression testing of structural adhesives". Mechanism and Machine Theory 159 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85101356610&partnerID=MN8TOARS. 10.1016/j.mechmachtheory.2021.104289 Santos, J.P.J.R.; Marques, E.A.S.; Carbas, R.J.C.; Gilbert, F.; da Silva, L.F.M.. "Experimental study of the impact of glass beads on adhesive joint strength and its failure mechanism". Materials 14 22 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85119718706&partnerID=MN8TOARS. 10.3390/ma14227013 Boutar, Y.; Naïmi, S.; Mezlini, S.; Carbas, R.J.C.; da Silva, L.F.M.; Ben Sik Ali, M.. "Cyclic fatigue testing: Assessment of polyurethane adhesive joints' durability for bus structures' aluminium assembly". Journal of Advanced Joining Processes 3 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85112550768&partnerID=MN8TOARS. 10.1016/j.jajp.2021.100053 Rosendo, D.; Viana, G.; Carbas, R.; Marques, E.; da Silva, L.F.. "Effect of Temperature and Moisture on the Impact Behaviour of Adhesive Joints for the Automotive Industry". Journal of Applied and Computational Mechanics 7 3 (2021): 1488-1500. http://www.scopus.com/inward/record.url?eid=2-s2.0-85110632697&partnerID=MN8TOARS. 10.22055/jacm.2021.36089.2793 Beygi, R.; Carbas, R.J.C.; Barbosa, A.Q.; Marques, E.A.S.; da Silva, L.F.M.. "A comprehensive analysis of a pseudo-brittle fracture at the interface of intermetallic of ¿ and steel in aluminum/steel joints made by FSW: Microstructure and fracture behavior". Materials Science and Engineering A 824 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85111238246&partnerID=MN8TOARS. 10.1016/j.msea.2021.141812 Borges, C.S.P.; Akhavan-Safar, A.; Marques, E.A.S.; Carbas, R.J.C.; Ueffing, C.; Weißgraeber, P.; da Silva, L.F.M.. "Effect of water ingress on the mechanical and chemical properties of polybutylene terephthalate reinforced with glass fibers". Materials 14 5 (2021): 1-24. http://www.scopus.com/inward/record.url?eid=2-s2.0-85102755332&partnerID=MN8TOARS. 10.3390/ma14051261 Beygi, R.; Carbas, R.; Queiros, A.; Marques, E.A.S.; Shi, R.; da Silva, L.F.M.. "Comparative Study Between Stainless Steel and Carbon Steel During Dissimilar Friction Stir Welding with Aluminum: Kinetics of Al–Fe Intermetallic Growth". Metals and Materials International (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85115879202&partnerID=MN8TOARS. 10.1007/s12540-021-01070-y MQ dos Reis; RJC Carbas; EAS Marques; LFM da Silva. "Numerical modelling of functionally graded adherends". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2020): 095440622096769-095440622096769. https://doi.org/10.1177/0954406220967695. 10.1177/0954406220967695 Alireza Akhavan-Safar; Joao Monteiro; Ricardo Carbas; Eduardo Marques; Rakesh Kumar Goyal; Lucas da Silva. "A modified degradation technique for fatigue life assessment of adhesive materials subjected to cyclic shear loads". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2020): 095440622096768-095440622096768. https://doi.org/10.1177/0954406220967684. 10.1177/0954406220967684 A Akhavan-Safar; J Monteiro; R Carbas; E Marques; R Goyal; LFM da Silva. "Tensile fatigue life prediction of adhesively bonded structures based on CZM technique and a modified degradation approach". Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 234 13 (2020): 1988-1999. https://doi.org/10.1177/0954410020951675. 10.1177/0954410020951675 M. A. Dantas; R. Carbas; E. A. S. Marques; M. P. L. Parente; D. Kushner; L. F. M. da Silva. "Numerical study of flexible tubular metal-polymer adhesive joints". The Journal of Adhesion (2020): 1-23. https://doi.org/10.1080/00218464.2020.1822173. 10.1080/00218464.2020.1822173 PDP Nunes; EAS Marques; RJC Carbas; A Akhavan-Safar; LFM da Silva. "DCB tests at constant strain rate using crash-resistant epoxy adhesives: A numerical and experimental approach". Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering (2020): 095440702095457-095440702095457. https://doi.org/10.1177/0954407020954572. 10.1177/0954407020954572 Mattia Frascio; Eduardo Marques; Ricardo Carbas; Lucas Filipe Martins da Silva; Margherita Monti; Massimiliano Avalle. "Review of Tailoring Methods for Joints with Additively Manufactured Adherends and Adhesives". Materials (2020): https://www.mdpi.com/1996-1944/13/18/3949. 10.3390/ma13183949 G Viana; RJC Carbas; M Costa; MD Banea; LFM da Silva. "A new cohesive element to model environmental degradation of adhesive joints in the rail industry". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2020): 095440622094890-095440622094890. https://doi.org/10.1177/0954406220948901. 10.1177/0954406220948901 CSP Borges; EAS Marques; RJC Carbas; C Ueffing; P Weißgraeber; LFM da Silva. "Review on the effect of moisture and contamination on the interfacial properties of adhesive joints". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2020): 095440622094420-095440622094420. https://doi.org/10.1177/0954406220944208. 10.1177/0954406220944208 CI da Silva; AQ Barbosa; RJC Carbas; EAS Marques; A Akhavan-Safar; LFM da Silva. "Influence of cork microparticles on the fracture type in single lap joints". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2020): 095440622093672-095440622093672. https://doi.org/10.1177/0954406220936729. 10.1177/0954406220936729 Nunes, Paulo DP; Borges, Catarina SP; Marques, Eduardo AS; Carbas, Ricardo JC; Akhavan-Safar, Alireza; Antunes, Diogo P; Lopes, António M; da Silva, Lucas FM. "Numerical assessment of strain rate in an adhesive layer throughout double cantilever beam and end notch flexure tests". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2020): 095440892091600. http://dx.doi.org/10.1177/0954408920916007. 10.1177/0954408920916007 dos Reis, Mateus Q; Carbas, Ricardo JC; Marques, Eduardo AS; da Silva, Lucas FM. "Numerical modelling of multi-material graded joints under shear loading". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2020): 095440892091611. http://dx.doi.org/10.1177/0954408920916112. 10.1177/0954408920916112 Rocha, A.V.M.; Akhavan-Safar, A.; Carbas, R.; Marques, E.A.S.; Goyal, R.; El-zein, M.; da Silva, L.F.M.. "Numerical analysis of mixed-mode fatigue crack growth of adhesive joints using CZM". Theoretical and Applied Fracture Mechanics 106 (2020): 102493. http://dx.doi.org/10.1016/j.tafmec.2020.102493. 10.1016/j.tafmec.2020.102493 Morgado, M.A.; Carbas, R.J.C.; Santos, D.G. dos; da Silva, L.F.M.. "Strength of CFRP joints reinforced with adhesive layers". International Journal of Adhesion and Adhesives 97 (2020): 102475. http://dx.doi.org/10.1016/j.ijadhadh.2019.102475. 10.1016/j.ijadhadh.2019.102475 Reis, JML; Machado, JJM; Marques, EAS; Carbas, RJC; da Silva, Lucas FM. "Displacement rate effect in the fracture toughness of glass fiber reinforced polyurethane". Journal of Composite Materials (2020): 002199832090830. http://dx.doi.org/10.1177/0021998320908300. 10.1177/0021998320908300 Borges, CSP; Nunes, PDP; Akhavan-Safar, A; Marques, EAS; Carbas, RJC; Alfonso, L; Silva, LFM. "A strain rate dependent cohesive zone element for mode I modeling of the fracture behavior of adhesives". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 234 4 (2020): 610-621. http://dx.doi.org/10.1177/1464420720904026. 10.1177/1464420720904026 Carbas, Ricardo J.C.; Palmares, Miguel P.; da Silva, Lucas F.M.. "Experimental and FE study of hybrid laminates aluminium carbon-fibre joints with different lay-up configurations". Manufacturing Review 7 (2020): 2. http://dx.doi.org/10.1051/mfreview/2019027. 10.1051/mfreview/2019027 Shang, X.; Marques, E.A.S.; Carbas, R.J.C.; Barbosa, A.Q.; Jiang, D.; da Silva, L.F.M.; Chen, D.; Ju, S.. "Fracture mechanism of adhesive single-lap joints with composite adherends under quasi-static tension". Composite Structures 251 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85087422097&partnerID=MN8TOARS. 10.1016/j.compstruct.2020.112639 dos Reis, M.Q.; Marques, E.A.S.; Carbas, R.J.C.; da Silva, L.F.M.. "Functionally graded adherends in adhesive joints: An overview". Journal of Advanced Joining Processes 2 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85103593328&partnerID=MN8TOARS. 10.1016/j.jajp.2020.100033 Borges, C.S.P.; Nunes, P.D.P.; Akhavan, A.; Marques, E.A.S.; Carbas, R.J.C.; Alfonso, L.; Silva, L.F.M.. "Influence of mode mixity and loading rate on the fracture behaviour of crash resistant adhesives". Theoretical and Applied Fracture Mechanics 107 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85079156151&partnerID=MN8TOARS. 10.1016/j.tafmec.2020.102508 Rosa, N.; Tavares, S.M.O.; Carbas, R.J.C.; Simoes, R.; Magalhães, F.D.; Marques, A.T.. "Methodology for Bone–Implant Stiffness Evaluation". Experimental Mechanics 60 9 (2020): 1251-1263. http://www.scopus.com/inward/record.url?eid=2-s2.0-85089503850&partnerID=MN8TOARS. 10.1007/s11340-020-00654-w Rosa, Natacha; Tavares, Sérgio; Carbas, Ricardo; Simoes, Ricardo; Magalhães, F.; Marques, António. "Methodology for Bone–Implant Stiffness Evaluation". (2020): http://hdl.handle.net/11110/1982. 10.1007/s11340-020-00654-w Rosa, Natacha; Tavares, Sérgio; Carbas, Ricardo; Simoes, Ricardo; Magalhães, F.; Marques, António. "Methodology for Bone–Implant Stiffness Evaluation". (2020): http://hdl.handle.net/11110/1982. 10.1007/s11340-020-00654-w Morgado, M.A.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "Reinforcement of CFRP single lap joints using metal laminates". Composite Structures 230 (2019): 111492. http://dx.doi.org/10.1016/j.compstruct.2019.111492. 10.1016/j.compstruct.2019.111492 Rocha, Ana V.M.; Akhavan-Safar, Alireza; Carbas, Ricardo; Marques, Eduardo A.S.; Goyal, Rakesh; El-zein, Mohamad; Silva, Lucas F.M.. "Fatigue crack growth analysis of different adhesive systems: Effects of mode mixity and load level". Fatigue & Fracture of Engineering Materials & Structures 43 2 (2019): 330-341. http://dx.doi.org/10.1111/ffe.13145. 10.1111/ffe.13145 Rocha, AVM; Akhavan-Safar, A; Carbas, R; Marques, EAS; Goyal, R; El-Zein, M; da Silva, LFM. "Paris law relations for an epoxy-based adhesive". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 234 2 (2019): 291-299. http://dx.doi.org/10.1177/1464420719886469. 10.1177/1464420719886469 Shang, X.; Marques, E.A.S.; Machado, J.J.M.; Carbas, R.J.C.; Jiang, D.; da Silva, L.F.M.. "Review on techniques to improve the strength of adhesive joints with composite adherends". Composites Part B: Engineering 177 (2019): 107363. http://dx.doi.org/10.1016/j.compositesb.2019.107363. 10.1016/j.compositesb.2019.107363 Banea, M. D.; Da Silva, L. F. M.; Carbas, R. J. C.; Cavalcanti, D.K.K; De Souza, L.F.G.. "The effect of environment and fatigue loading on the behaviour of TEPs-modified adhesives". The Journal of Adhesion 96 1-4 (2019): 423-436. http://dx.doi.org/10.1080/00218464.2019.1680546. 10.1080/00218464.2019.1680546 Monteiro, J.; Akhavan-Safar, A.; Carbas, R.; Marques, E.; Goyal, R.; El-zein, M.; da Silva, L.F.M.. "Mode II modeling of adhesive materials degraded by fatigue loading using cohesive zone elements". Theoretical and Applied Fracture Mechanics 103 (2019): 102253. http://dx.doi.org/10.1016/j.tafmec.2019.102253. 10.1016/j.tafmec.2019.102253 Cavalcanti, D.K.K.; Banea, M.D.; Neto, J.S.S.; Lima, R.A.A.; da Silva, L.F.M.; Carbas, R.J.C.. "Mechanical characterization of intralaminar natural fibre-reinforced hybrid composites". Composites Part B: Engineering 175 (2019): 107149. http://dx.doi.org/10.1016/j.compositesb.2019.107149. 10.1016/j.compositesb.2019.107149 Monteiro, Joao; Akhavan-Safar, Alireza; Carbas, Ricardo; Marques, Eduardo; Goyal, Rakesh; El-zein, Mohamad; Silva, Lucas F.M.. "Influence of mode mixity and loading conditions on the fatigue crack growth behaviour of an epoxy adhesive". Fatigue & Fracture of Engineering Materials & Structures 43 2 (2019): 308-316. http://dx.doi.org/10.1111/ffe.13125. 10.1111/ffe.13125 Antunes, Diogo P. C.; Lopes, António M.; Moreira da Silva, Carlos M. S.; da Silva, Lucas F. M.; Nunes, Paulo D. P.; Marques, Eduardo A. S.; Carbas, Ricardo J. C.. "Development of a Drop Weight Machine for Adhesive Joint Testing". Journal of Testing and Evaluation 49 3 (2019): 20190147. http://dx.doi.org/10.1520/jte20190147. 10.1520/jte20190147 Marques, J.B.; Barbosa, A.Q.; da Silva, C.I.; Carbas, R.J.C.; da Silva, L.F.M.. "An overview of manufacturing functionally graded adhesives – Challenges and prospects". The Journal of Adhesion (2019): 1-35. http://dx.doi.org/10.1080/00218464.2019.1646647. 10.1080/00218464.2019.1646647 dos Reis, M. Q.; Banea, M. D.; da Silva, L. F. M.; Carbas, R. J. C.. "Mechanical characterization of a modern epoxy adhesive for automotive industry". Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 8 (2019): http://dx.doi.org/10.1007/s40430-019-1844-2. 10.1007/s40430-019-1844-2 Zugliani, P. A.; Banea, M. D.; Budhe, S.; Carbas, R. J.; da Silva, L. F. M.; Rohem, N. R. F.; de Barros, S.. "Bonded composite repair of metallic pipeline using energy release rate method". Journal of Adhesion Science and Technology 33 19 (2019): 2141-2156. http://dx.doi.org/10.1080/01694243.2019.1632537. 10.1080/01694243.2019.1632537 Machado, JJM; Hayashi, A; Nunes, PDP; Marques, EAS; Carbas, RJC; Sato, C; da Silva, LFM. "Strain rate dependence of a crash resistant adhesive as a function of temperature for the automotive industry". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 233 11 (2019): 2189-2203. http://dx.doi.org/10.1177/1464420719836914. 10.1177/1464420719836914 Santos, D.G.D.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.. "Reinforcement of CFRP joints with fibre metal laminates and additional adhesive layers". Composites Part B: Engineering 165 (2019): 386-396. http://www.scopus.com/inward/record.url?eid=2-s2.0-85060610126&partnerID=MN8TOARS. 10.1016/j.compositesb.2019.01.096 Filipe A. G. Giesteira; E. A. S. Marques; R. J. C. Carbas; L. F. M. da Silva. "Prediction of Joint Strength and Effect of the Surface Treatment on the Single Overlap Adhesive Joints". U.Porto Journal of Engineering 3 3 (2018): 1-16. https://doi.org/10.24840/2183-6493_003.003_0001. 10.24840/2183-6493_003.003_0001 Banea, M.D.; Da Silva, L.F.M.; Carbas, R.; Barros, S.D.E.. "Effect of temperature and moisture on the tensile properties of a TEPS-modified adhesive". Materiale Plastice 55 (2018): 478-481. http://www.scopus.com/inward/record.url?eid=2-s2.0-85060643227&partnerID=MN8TOARS. Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; Barbosa, A.Q.; de Barros, S.; Viana, G.. "Effect of water on the behaviour of adhesives modified with thermally expandable particles". International Journal of Adhesion and Adhesives 84 (2018): 250-256. http://www.scopus.com/inward/record.url?eid=2-s2.0-85045477742&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2018.04.002 Viana, G.; Machado, J.; Carbas, R.; Costa, M.; da Silva, L.F.M.; Vaz, M.; Banea, M.D.. "Strain rate dependence of adhesive joints for the automotive industry at low and high temperatures". Journal of Adhesion Science and Technology 32 19 (2018): 2162-2179. http://www.scopus.com/inward/record.url?eid=2-s2.0-85046020652&partnerID=MN8TOARS. 10.1080/01694243.2018.1464635 Banea, M.D.; Rosioara, M.; Carbas, R.J.C.; da Silva, L.F.M.. "Multi-material adhesive joints for automotive industry". Composites Part B: Engineering 151 (2018): 71-77. http://www.scopus.com/inward/record.url?eid=2-s2.0-85048559625&partnerID=MN8TOARS. 10.1016/j.compositesb.2018.06.009 Carbas, R.J.C.; da Silva, L.F.M.; Andrés, L.F.S.. "Effect of carbon black nanoparticles concentration on the mechanical properties of a structural epoxy adhesive". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 232 5 (2018): 403-415. http://www.scopus.com/inward/record.url?eid=2-s2.0-85020618333&partnerID=MN8TOARS. 10.1177/1464420716629046 Carbas, R.J.C.; Da Silva, L.F.M.; Andrés, L.F.S.. "The Mechanical Response of a Structural Epoxy Adhesive Reinforced with Carbon Black Nanoparticles". Microscopy and Microanalysis (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85055057797&partnerID=MN8TOARS. 10.1017/S1431927618015106 Bonaldo, J.; Banea, M.D.; Carbas, R.J.C.; Da Silva, L.F.M.; De Barros, S.. "Functionally graded adhesive joints by using thermally expandable particles". Journal of Adhesion (2018): 1-20. http://www.scopus.com/inward/record.url?eid=2-s2.0-85047906910&partnerID=MN8TOARS. 10.1080/00218464.2018.1456338 Shang, X.; Marques, E.A.S.; Machado, J.J.M.; Carbas, R.J.C.; Jiang, D.; da Silva, L.F.M.. "A strategy to reduce delamination of adhesive joints with composite substrates". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85059669496&partnerID=MN8TOARS. 10.1177/1464420718805712 Boutar, Y.; Naïmi, S.; Mezlini, S.; Carbas, R.J.C.; da Silva, L.F.M.; Ben Sik Ali, M.. "Fatigue resistance of an aluminium one-component polyurethane adhesive joint for the automotive industry: Effect of surface roughness and adhesive thickness". International Journal of Adhesion and Adhesives 83 (2018): 143-152. http://www.scopus.com/inward/record.url?eid=2-s2.0-85043230156&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2018.02.012 Nakada, S.; Furusawa, T.; Yokoi, E.; Carbas, R.; Costa, M.; Marques, E.; Viana, G.; da Silva, L.F.M.. "Influence of Ductility Ingredients of Structural Adhesives on Fracture Energy under Static Mixed-Mode Loading". SAE Technical Papers 2017-March March (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85018454167&partnerID=MN8TOARS. 10.4271/2017-01-0473 Costa, M.; Carbas, R.; Marques, E.; Viana, G.; da Silva, L.F.M.. "An apparatus for mixed-mode fracture characterization of adhesive joints". Theoretical and Applied Fracture Mechanics 91 (2017): 94-102. http://www.scopus.com/inward/record.url?eid=2-s2.0-85018351296&partnerID=MN8TOARS. 10.1016/j.tafmec.2017.04.014 Banea, M.D.; da Silva, L.F.M.; Carbas, R.; Campilho, R.D.S.G.. "Effect of material on the mechanical behaviour of adhesive joints for the automotive industry". Journal of Adhesion Science and Technology 31 6 (2017): 663-676. http://www.scopus.com/inward/record.url?eid=2-s2.0-84986203538&partnerID=MN8TOARS. 10.1080/01694243.2016.1229842 Carbas, R.J.C.; da Silva, L.F.M.; Andrés, L.F.S.. "Functionally graded adhesive joints by graded mixing of nanoparticles". International Journal of Adhesion and Adhesives 76 (2017): 30-37. http://www.scopus.com/inward/record.url?eid=2-s2.0-85012256416&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2017.02.004 Domingues, N.R.E.; Trojan, J.C.; Campilho, R.D.S.G.; Carbas, R.J.C.; Banea, M.D.; da Silva, L.F.M.. "Strength and failure modes of single-L adhesive joints between aluminium and composites". Ciencia e Tecnologia dos Materiais 29 1 (2017): e114-e118. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021952151&partnerID=MN8TOARS. 10.1016/j.ctmat.2016.04.009 Marques, E.A.S.; Carbas, R.J.C.; Silva, F.; da Silva, L.F.M.; de Paiva, D.P.S.; Magalhães, F.D.. "Use of master curves based on time-temperature superposition to predict creep failure of aluminium-glass adhesive joints". International Journal of Adhesion and Adhesives 74 (2017): 144-154. http://www.scopus.com/inward/record.url?eid=2-s2.0-85010333263&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2016.12.007 Fernandes, P.; Viana, G.; Carbas, R.J.C.; Costa, M.; da Silva, L.F.M.; Banea, M.D.. "The influence of water on the fracture envelope of an adhesive joint". Theoretical and Applied Fracture Mechanics 89 (2017): 1-15. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009788288&partnerID=MN8TOARS. 10.1016/j.tafmec.2017.01.001 Costa, M.; Carbas, R.; Benedita, M.; Marques, E.; Viana, G.; da Silva, L.F.M.; Yokoi, E.; Nakada, S.; Furusawa, T.. "Static assessment of the mixed-mode behaviour of three epoxy adhesives". Engineering Fracture Mechanics 182 (2017): 552-565. http://www.scopus.com/inward/record.url?eid=2-s2.0-85019630920&partnerID=MN8TOARS. 10.1016/j.engfracmech.2017.05.028 Banea, M.D.; da Silva, L.F.M.; Carbas, R.J.C.; de Barros, S.. "Debonding on command of multi-material adhesive joints". Journal of Adhesion 93 10 (2017): 756-770. http://www.scopus.com/inward/record.url?eid=2-s2.0-84982286101&partnerID=MN8TOARS. 10.1080/00218464.2016.1199963 Domingues, N.R.E.; Campilho, R.D.S.G.; Carbas, R.J.C.; Da Silva, L.F.M.. "Experimental and numerical failure analysis of aluminium/composite single-L joints". International Journal of Adhesion and Adhesives 64 (2016): 86-96. http://www.scopus.com/inward/record.url?eid=2-s2.0-84945588451&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2015.10.011 Avendaño, R.; Carbas, R.J.C.; Marques, E.A.S.; da Silva, L.F.M.; Fernandes, A.A.. "Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive". Composite Structures 152 (2016): 34-44. http://www.scopus.com/inward/record.url?eid=2-s2.0-84968735412&partnerID=MN8TOARS. 10.1016/j.compstruct.2016.05.034 Ribeiro, F.M.F.; Campilho, R.D.S.G.; Carbas, R.J.C.; da Silva, L.F.M.. "Strength and damage growth in composite bonded joints with defects". Composites Part B: Engineering 100 (2016): 91-100. http://www.scopus.com/inward/record.url?eid=2-s2.0-84975871923&partnerID=MN8TOARS. 10.1016/j.compositesb.2016.06.060 Avendanõ, R.; Carbas, R.J.C.; Chaves, F.J.P.; Costa, M.; Da Silva, L.F.M.; Fernandes, A.A.. "Impact Loading of Single Lap Joints of Dissimilar Lightweight Adherends Bonded with a Crash-Resistant Epoxy Adhesive". Journal of Engineering Materials and Technology, Transactions of the ASME 138 4 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84981539668&partnerID=MN8TOARS. 10.1115/1.4034204 Marques, E.A.S.; Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Sato, C.. "Effect of low temperature on tensile strength and mode i fracture energy of a room temperature vulcanizing silicone adhesive". Journal of Testing and Evaluation 44 3 (2016): 1284-1293. http://www.scopus.com/inward/record.url?eid=2-s2.0-84984578001&partnerID=MN8TOARS. 10.1520/JTE20140208 Carbas, R.J.C.; Da Silva, L.F.M.; Andrés, L.F.S.. "Effect of Carbon Black Nanoparticles Concentration on Mechanical Properties of an Epoxy Adhesive Cured by Dielectric Heating". Microscopy and Microanalysis 21 (2015): 15-16. http://www.scopus.com/inward/record.url?eid=2-s2.0-84944060138&partnerID=MN8TOARS. 10.1017/S1431927615013884 Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.. "Debonding on command of adhesive joints for the automotive industry". International Journal of Adhesion and Adhesives 59 (2015): 14-20. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922831549&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2015.01.014 Carbas, R.J.C.; Da Silva, L.F.M.; Critchlow, G.W.. "Effect of post-cure on adhesively bonded functionally graded joints by induction heating". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 229 5 (2015): 419-430. http://www.scopus.com/inward/record.url?eid=2-s2.0-84940951290&partnerID=MN8TOARS. 10.1177/1464420714523579 Carbas, R.J.C.; Viana, G.M.S.O.; Da Silva, L.F.M.; Critchlow, G.W.. "Functionally graded adhesive patch repairs of wood beams in civil applications". Journal of Composites for Construction 19 2 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84925068182&partnerID=MN8TOARS. 10.1061/(ASCE)CC.1943-5614.0000500 Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Structural adhesives modified with thermally expandable particles". Journal of Adhesion 91 10-11 (2015): 823-840. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922825124&partnerID=MN8TOARS. 10.1080/00218464.2014.985785 Banea, Mariana D.; Silva, Lucas da; Carbas, Ricardo J.C.; Campilho, Raul. "Structural adhesives modified with thermally expandable particles". (2015): http://hdl.handle.net/10400.22/7394. 10.1080/00218464.2014.985785 Banea, Mariana D.; Silva, Lucas da; Carbas, Ricardo J.C.; Campilho, Raul. "Structural adhesives modified with thermally expandable particles". (2015): http://hdl.handle.net/10400.22/7394. 10.1080/00218464.2014.985785 Banea, M.D.; Silva, L.F.M.D.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Debonding of adhesively bonded joints". Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment and Technology 25 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84921290337&partnerID=MN8TOARS. Carbas, R.J.C.; Da Silva, L.F.M.; Madureira, M.L.; Critchlow, G.W.. "Modelling of functionally graded adhesive joints". Journal of Adhesion 90 8 (2014): 698-716. http://www.scopus.com/inward/record.url?eid=2-s2.0-84897563402&partnerID=MN8TOARS. 10.1080/00218464.2013.834255 Banea, M.D.; Da Silva, L.F.M.; Carbas, R.J.C.; Campilho, R.D.S.G.. "Mechanical and thermal characterization of a structural polyurethane adhesive modified with thermally expandable particles". International Journal of Adhesion and Adhesives 54 (2014): 191-199. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903983437&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2014.06.008 Carbas, R.J.C.; Da Silva, L.F.M.; Critchlow, G.W.. "Adhesively bonded functionally graded joints by induction heating". International Journal of Adhesion and Adhesives 48 (2014): 110-118. http://www.scopus.com/inward/record.url?eid=2-s2.0-84886259699&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2013.09.045 Marques, E.A.S.; Da Silva, L.F.M.; Banea, M.D.; Carbas, R.J.C.. "Adhesive joints for low- and high-temperature use: An overview". Journal of Adhesion 91 7 (2014): 556-585. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919489787&partnerID=MN8TOARS. 10.1080/00218464.2014.943395 Carbas, R.J.C.; Marques, E.A.S.; Da Silva, L.F.M.; Lopes, A.M.. "Effect of cure temperature on the glass transition temperature and mechanical properties of epoxy adhesives". Journal of Adhesion 90 1 (2014): 104-119. http://www.scopus.com/inward/record.url?eid=2-s2.0-84885355715&partnerID=MN8TOARS. 10.1080/00218464.2013.779559 Carbas, Ricardo. "Efeito da temperatura de cura na temperatura de transição vítrea de adesivos epóxidos". Mecânica Experimental 23 (2014): 9-18. Published Banea, Mariana D.; Silva, Lucas F. M. da; Carbas, Ricardo J.C.; Campilho, Raul. "Smart Adhesive Joints: An overview of recent developments". (2014): http://hdl.handle.net/10400.22/5288. 10.1080/00218464.2013.785916 Banea, Mariana D.; Silva, Lucas F. M. da; Carbas, Ricardo J.C.; Campilho, Raul. "Smart Adhesive Joints: An overview of recent developments". (2014): http://hdl.handle.net/10400.22/5288. 10.1080/00218464.2013.785916 Banea, Mariana D.; Silva, Lucas F. M. da; Carbas, Ricardo J.C.; Campilho, Raul. "Mechanical and thermal characterization of a structural polyurethane adhesive modified with thermally expandable particles". (2014): http://hdl.handle.net/10400.22/5276. 10.1016/j.ijadhadh.2014.06.008 Banea, Mariana D.; Silva, Lucas F. M. da; Carbas, Ricardo J.C.; Campilho, Raul. "Mechanical and thermal characterization of a structural polyurethane adhesive modified with thermally expandable particles". (2014): http://hdl.handle.net/10400.22/5276. 10.1016/j.ijadhadh.2014.06.008 Banea, Mariana D.; Silva, Lucas F. M. da; Carbas, Ricardo J.C.; Campilho, Raul. "Smart Adhesive Joints: An overview of recent developments". (2014): http://hdl.handle.net/10400.22/5288. 10.1080/00218464.2013.785916 Saldanha, D.F.S.; Canto, C.; Da Silva, L.F.M.; Carbas, R.J.C.; Chaves, F.J.P.; Nomura, K.; Ueda, T.. "Mechanical characterization of a high elongation and high toughness epoxy adhesive". International Journal of Adhesion and Adhesives 47 (2013): 91-98. http://www.scopus.com/inward/record.url?eid=2-s2.0-84888288711&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2013.08.001 Carbas, R.J.C.; Da Silva, L.F.M.; Marques, E.A.S.; Lopes, A.M.. "Effect of post-cure on the glass transition temperature and mechanical properties of epoxy adhesives". Journal of Adhesion Science and Technology 27 23 (2013): 2542-2557. http://www.scopus.com/inward/record.url?eid=2-s2.0-84885359243&partnerID=MN8TOARS. 10.1080/01694243.2013.790294 da Silva, L.F.M.; Carbas, R.J.C.; Critchlow, G.W.; Figueiredo, M.A.V.; Brown, K.. "Effect of material, geometry, surface treatment and environment on the shear strength of single lap joints". International Journal of Adhesion and Adhesives 29 6 (2009): 621-632. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349185073&partnerID=MN8TOARS. 10.1016/j.ijadhadh.2009.02.012
Newspaper article	Carbas, R. J. C.. "Effect of the adhesive thickness on butt adhesive joints under torsional loads", Journal of Advanced Joining Processes, 2021, 3, https://doi.org/10.1016/j.jajp.2021.100061. Carbas, R. J. C.. "Fatigue behaviour of an adhesive under mixed-mode conditions", Tecnologia em Metalurgia, Materiais e Mineração, 2021, 18, http://dx.doi.org/10.4322/2176-1523.20212463.
Thesis / Dissertation	Guimarães, André Martins. "Novo conceito de juntas adesivas utilizando laminados de fibras e metal". Master, 2016. http://hdl.handle.net/10400.19/3319. Guimarães, André Martins. "Novo conceito de juntas adesivas utilizando laminados de fibras e metal". Master, 2016. http://hdl.handle.net/10400.19/3319. Guimarães, André Martins. "Novo conceito de juntas adesivas utilizando laminados de fibras e metal". Master, 2016. http://hdl.handle.net/10400.19/3319. Domingues, Nuno Ricardo Esteves. "Estudo da resistência de juntas adesivas em L entre alumínio e material compósito". Master, 2015. http://hdl.handle.net/10400.22/7167. Ribeiro, Filipe Manuel Ferreira. "Estudo da resistência e mecanismos de dano em juntas adesivas entre materiais compósitos com defeitos de adesão". Master, 2015. http://hdl.handle.net/10400.22/8150. Domingues, Nuno Ricardo Esteves. "Estudo da resistência de juntas adesivas em L entre alumínio e material compósito". Master, 2015. http://hdl.handle.net/10400.22/7167. Ribeiro, Filipe Manuel Ferreira. "Estudo da resistência e mecanismos de dano em juntas adesivas entre materiais compósitos com defeitos de adesão". Master, 2015. http://hdl.handle.net/10400.22/8150. Ribeiro, Filipe Manuel Ferreira. "Estudo da resistência e mecanismos de dano em juntas adesivas entre materiais compósitos com defeitos de adesão". Master, 2015. http://hdl.handle.net/10400.22/8150. Domingues, Nuno Ricardo Esteves. "Estudo da resistência de juntas adesivas em L entre alumínio e material compósito". Master, 2015. http://hdl.handle.net/10400.22/7167. Ribeiro, Filipe Manuel Ferreira. "Estudo da resistência e mecanismos de dano em juntas adesivas entre materiais compósitos com defeitos de adesão". Master, 2015. http://hdl.handle.net/10400.22/8150. Domingues, Nuno Ricardo Esteves. "Estudo da resistência de juntas adesivas em L entre alumínio e material compósito". Master, 2015. http://hdl.handle.net/10400.22/7167. Ricardo João Camilo Carbas. "Adhesively bonded functionally graded joints". PhD, 2013. http://hdl.handle.net/10216/78956. Ricardo João Camilo Carbas. "Adhesively bonded functionally graded joints". PhD, 2013. https://repositorio-aberto.up.pt/handle/10216/78956. Ricardo João Camilo Carbas. "Adhesively bonded functionally graded joints". PhD, 2013. https://hdl.handle.net/10216/78956. Ricardo João Camilo Carbas. "Adhesively bonded functionally graded joints". PhD, 2013. https://hdl.handle.net/10216/78956. Reis, Ana Cristina Malheiro dos. "Efeito da temperatura de cura na temperatura de transição vítrea de um adesivo estrutural". Master, 2012. http://hdl.handle.net/10216/63347. Reis, Ana Cristina Malheiro dos. "Efeito da temperatura de cura na temperatura de transição vítrea de um adesivo estrutural". Master, 2012. http://hdl.handle.net/10216/63347. Carbas, Ricardo João Camilo. "Estudo paramétrico de juntas adesivas pelo método de Taguchi". Master, 2008. http://hdl.handle.net/10216/59819. Carbas, Ricardo João Camilo. "Estudo paramétrico de juntas adesivas pelo método de Taguchi". Master, 2008. http://hdl.handle.net/10216/59819. Carbas, Ricardo João Camilo. "Estudo paramétrico de juntas adesivas pelo método de Taguchi". Master, 2008. http://hdl.handle.net/10216/59819. Carbas, Ricardo João Camilo. "Estudo paramétrico de juntas adesivas pelo método de Taguchi". Master, 2008. http://hdl.handle.net/10216/59819.

Intellectual property

Provisional application for patent

2022. "Single loading four-step testing apparatus for mechanical characterisation of adhesives".
Protected
2018. "Split Hopkinson pressure bar setup for tensile and compression testing with pneumatic impact actuator".
2018. "Transverse reinforcement of composite materials with high toughness and ductility surface layers".
2017. "Magnetization of cork particles for manufacturing components or composite materials".
Disclosed
2017. "Apparatus to Test the Adhesion Force of Product Packaging Capsules under Pressure Loads".
Disclosed
2017. "High Performance Thermal Chamber for Material Testing".
Disclosed
2016. "Torsion Machine for Adhesive Joints".
Disclosed
2013. "Functionally Graded Cure by Induction Heating".
Disclosed

Other

Other output

Structural adhesives modified with thermally expandable particles. In this study, the behaviour of two structural adhesives modified with thermally expandable particles (TEPs) was investigated as a preliminary study for further investigations on the potential of TEPs in adhesive joints. Tensile bulk tests were performed to get the tensile properties of the adhesives and TEPs-modified adhesives. In order to determine the expansion temperature of the particles whil. 2015. Banea, Mariana D.; Silva, Lucas da; Carbas, Ricardo J.C.; Campilho, Raul. http://hdl.handle.net/10400.22/7394.
10.1080/00218464.2014.985785

Activities

Oral presentation

	Presentation title	Event name Host (Event location)
2021/10/22	The influence of polymeric laminate amount in the strength and failure mode of hybrid joints	nd International Conference on Advanced Joining Processes AJP2021 (Sintra, Portugal)
2021/07/09	The strength of hybrid SLJs reinforced with different thicknesses of polymeric laminates	6th International Conference on Structural Adhesive Bonding 2021 (Porto, Portugal)
2021/07/08	The effect of different metallic laminates on the strength of CFRP SLJs using metal laminate adherends	6th International Conference on Structural Adhesive Bonding 2021 (Porto, Portugal)
2020/11/06	Joint strength of toughened transverse composites under different loading rates	3rd International Conference on Materials Design and Applications MDA 2020 (Porto, Portugal)
2020/11/05	Effect of adhesive thickness on butt adhesive joints under torsional loads	3rd International Conference on Materials Design and Applications MDA 2020 (Porto, Portugal)
2020/10/15	Advanced Joining Processes Unit: A fully independent research group	1st International Conference on Science and Technology Education STE 2020 (Porto, Portugal)
2020/03/05	Shear characterization of structural adhesives under different torsional load rates	1st International Conference on Industrial Applications of Adhesives 2020 (Funchal, Portugal)
2020/03	Joint strength improvement using toughened transverse composite adherends	1st International Conference on Industrial Applications of Adhesives 2020 (Funchal, Portugal)
2019/10/25	Strength of laminates aluminium carbon-fibre joints under impact loads	1st International Conference on Advanced Joining Processes 2019 (Ponta Delgada, Portugal)
2019/07/11	Strength of hybrid laminates aluminium carbon-fibre joints under impact loads	5th International Conference on Structural Adhesive Bonding 2019 (Porto, Portugal)
2018/09/06	Strength of hybrid laminates metal-carbon fibre joints with different lay-up configurations	Euradh – CLBA 2018 (Lisboa, Portugal)
2018/07/06	CFRP joints with hybrid laminates metal-carbon fibre	MDA2018 - 2nd International Conference on Materials Design and Applications (Porto, Portugal)
2018/02/27	Strength of CFRP Joints reinforced with Aluminum Laminates	6th World Congress on Adhesion and Related Phenomena and 41st Annual Meeting of The Adhesion Society (San Diego, United States)
2017/07/06	Strength of hybrid laminates aluminium carbon-fibre joints with different lay-up configurations	AB2017 - 4th International Conference on Structural Adhesive Bonding (Portugal)
2016/06/30	Graded Adhesive Joints by Nanoparticles Reinforcement	MDA2016 - 1st International Conference on Materials Design and Applications (Portugal)
2016/01/26	Functionally graded adhesive joints by mixing of carbon-black nanoparticles	CLBA2016 - 3ª Conferência Luso-Brasileira de Adesão e Adesivos (Portugal)
2016/01/26	Strength and failure modes in composite bonded joints with defects	CLBA2016 - 3ª Conferência Luso-Brasileira de Adesão e Adesivos (Portugal)
2015/06/22	Effect of Carbon Black Nanoparticles concentration on the Mechanical properties of a Structural Epoxy Adhesive	MATERIAIS 2015 - VII International Materials Symposium and 17th Conference of Sociedade Portuguesa de Materiais (Portugal)
2014/10/24	Juntas adesivas funcionalmente graduadas por mistura graduada de nano-partículas	ENMEC2014 - 3º Encontro Português de Materiais e Estruturas Compósitas (Lisboa, Portugal)
2014/06/24	Effect of post-cure on adhesively bonded functionally graded joints by induction heating	The Adhesion Society - 37th Annual Meeting of The Adhesion Society (San Diego, United States)
2014/04/23	Functionally graded adhesive patch repairs in civil applications	EURADH '14 - 10th European Adhesion Conference IEEE (Portugal)
2013/07/04	Adhesively bonded functionally graded joints by induction heating	AB2013 - 2nd International Conference on Structural Adhesive Bonding (Porto, Portugal)
2013/06/24	Adhesively Bonded Functionally Graded Joints	4th International Conference on Integrity, Reliability & Failure (Funchal, Portugal)
2012/11/08	Effect of Post-Cure on the Glass Transition Temperature and Mechanical Properties of Epoxy Adhesives	Conferência Luso-Brasileira de Adesão e Adesivos (Rio de Janeiro, Brazil)
2012/07/22	Effect of Cure Temperature on the Glass Transition Temperature of an epoxy adhesive	15th International Conference on Experimental Mechanics (Porto, Portugal)
2011/09/29	Effect of Curing Temperature on the Mechanical Properties of Structural Adhesives	XII Congreso de Adhesión y Adhesivos (San Sebastián, Spain)

Supervision

	Thesis Title Role	Degree Subject (Type) Institution / Organization
2019/03/01 - Current	Graded adhesive joints with dissimilar substrates Co-supervisor	Mestrado em Engenharia Mecânica (Master) Centro Federal de Educação Tecnólogica Celso Suckow da Fonseca, Brazil
2019/03/01 - Current	Optimization of CFRP joints with fibre metal laminates Co-supervisor	Mestrado Integrado em Engenharia Mecânica (Master) Universidade do Porto Faculdade de Engenharia, Portugal
2019/02/01 - Current	Design methodology for impact resistant bonded multi-material automotive structures Supervisor	Engenharia Mecânica (PhD) Universidade do Porto Faculdade de Engenharia, Portugal
2018/03/01 - Current	Development of a three-station creep machine for adhesive joints testing Co-supervisor	Mestrado integrado em Engenharia Mecânica (Master) Universidade do Porto Faculdade de Engenharia, Portugal
2016/02/01 - Current	Reabilitac¸a~o este´tica minimamente invasiva de casos de agenesia de incisivos laterais superiores: comportamento qui´mico- meca^nico Co-supervisor	Ciências Biológicas Aplicadas à Saúde (PhD) Cooperativa de Ensino Superior Politécnico e Universitário, Portugal
2020/03/01 - 2020/07/21	Adhesively bonded tubular metal-polymer joints Supervisor	Engenharia Mecânica Universidade do Porto Faculdade de Engenharia, Portugal
2018/09/17 - 2019/02/15	Characterization of the fatigue behavior of a structural adhesive for high performance applications Co-supervisor	Engenharia Mecânica (Master) Universidade do Porto Faculdade de Engenharia, Portugal
2018/02/05 - 2018/07/09	Optimization of CFRP joints with fibre metal laminates Co-supervisor	Engenharia Mecânica (Master) Universidade do Porto Faculdade de Engenharia, Portugal
2017/09/18 - 2018/03/15	CFRP joints with hybrid laminates metal-carbon fibre Co-supervisor	Engenharia Mecânica (Master) Universidade do Porto Faculdade de Engenharia, Portugal
2016/02/15 - 2016/07/18	CFRP joints with hybrid laminates aluminium-carbon fibre Co-supervisor	Engenharia Mecânica (Master) Universidade do Porto Faculdade de Engenharia, Portugal
2015/02/16 - 2016/07/12	Novel adhesive bonding joint concept using fibre metal laminates Co-supervisor	Engenharia Mecânica e Gestão Industrial (Master) Instituto Politécnico de Viseu, Portugal
2014/09/15 - 2015/11/13	Estudo da resistência e mecanismos de dano em juntas adesivas entre materiais compósitos com defeitos de adesão Co-supervisor	Engenharia Mecânica (Master) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015/02/16 - 2015/07/16	Multi-material adhesive joints for automotive industry Co-supervisor	Engenharia Mecânica (Master) Universidade do Porto Faculdade de Engenharia, Portugal
2015/02/16 - 2015/07/16	Optimization of CFRP joints with fibre metal laminates Co-supervisor	Engenharia Mecânica (Master) Universidade do Porto Faculdade de Engenharia, Portugal
2014/09/15 - 2015/06/25	Estudo da resistência de juntas adesivas em L entre alumínio e material compósito Co-supervisor	Engenharia Mecânica (Master) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014/02/10 - 2014/07/10	Functionally graded joints by dielectric heating Co-supervisor	Engenharia Mecânica (Master) Universidade do Porto Faculdade de Engenharia, Portugal
2013/02/13 - 2013/07/22	Functionally Graded Adhesive Patch Repairs in Civil Applications Co-supervisor	Engenharia Mecânica (Master) Universidade do Porto Faculdade de Engenharia, Portugal
2011/09/12 - 2012/02/10	Efeito da temperatura de cura na temperatura de transição vitrea de um adesivo estrutural Co-supervisor	Engenharia Mecânica (Master) Universidade do Porto Faculdade de Engenharia, Portugal

Event organisation

	Event name Type of event (Role)	Institution / Organization
2021 - Current	Part of the scientific committee of the IAMaC (Ibero American Conference on Composite Materials) (2021)
2019/02/18 - Current	Part of the scientific committee of the AJP (International Conference on Advanced Joining Processes) conference (2019/10/24 - 2019/10/25) Conference (Member of the Scientific Committee)	Universidade do Porto Faculdade de Engenharia, Portugal
2018/07/16 - Current	Part of the scientific committee of the MDA (International Conference on Materials Design and Applications) conferences (2018/07/05 - 2018/07/06) Conference (Member of the Scientific Committee)	Universidade do Porto Faculdade de Engenharia, Portugal
2018 - Current	Part of the scientific committee of the CLBA (Conferência Luso-Brasileira em Adesivos e Adesão) (2018)
2021/07/29 - 2021/07/30	IAMaC2021: 1ª Conferência Ibero-Americana de Materiais Compósitos (2021/07/29 - 2021/07/30) Conference (Co-organisor)	Universidade do Porto Faculdade de Engenharia, Portugal

Event participation

	Activity description Type of event	Event name Institution / Organization
2018/07/05 - 2018/07/06	Chair of the section 7A - Joining Conference	MDA2018 - 2nd International Conference on Materials Design and Applications
2017/05/10 - 2017/07/28	Using the Lean Start-Up approach, BIP – Business Ignition Programme – aims to build and test alternative business models for technologies developed in academia. Business models was presented and validated on the market, promoting technology transfer and the creation of new businesses. Other	BIP - Business Ignition Programme Universidade do Porto, Portugal
2017/07/06 - 2017/07/07	Chair of the section 2B - Adhesive Properties I Conference	AB2017 - 4th International Conference on Structural Adhesive Bonding 2017
2016/06/30 - 2016/07/01	Chair of section 2A - Adhesive Bonding Conference	MDA2016 - 1st International Conference on Materials Design and Applications
2016/01/25 - 2016/01/27	Chair of section 5A Conference	CLBA2016 - 3ª Conferência Luso-Brasileira de Adesão e Adesivos

Jury of academic degree

	Topic Role	Candidate name (Type of degree) Institution / Organization
2018/10/31	Estudo numérico de juntas adesivas mistas solicitadas ao impacto (Thesis) Arguer	Luís António Salgueiro Maia (Master) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2018/10/31	Influência dos parâmetros e critérios dos modelos de dano coesivo na previsão da resistência ao impacto de juntas adesivas (Thesis) Arguer	Tiago Filipe Campos Pereira (Master) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017/11/02	Validação do método de elementos finitos eXtendido para a previsão do comportamento de juntas adesivas em T (Thesis) Arguer	Filipe José Pinho Moreira (Master) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2017/11/02	Validação de envelopes de fratura de adesivos obtidos em ensaios de fratura em modo misto para a previsão de resistência de juntas de modo misto (Thesis) Arguer	José Pedro Silva Moreira Barros Ribeiro (Master) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015/11/04	Estudo e otimização de juntas do tipo T-peel soldadas, adesivas e híbridas (Thesis) Arguer	Fernando Jorge da Silva de Almeida (Master) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2015/11/04	Caraterização das propriedades mecânicas e de fratura de um adesivo estrutural de alta ductilidade (Thesis) Arguer	João Pedro Ramos Monteiro (Master) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014/11/11	Influência do tipo de adesivo em juntas híbridas soldadas-adesivas (Thesis) Arguer	Gustavo Pereira Marques (Master) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2014/07/16	Aplicação de métodos numéricos avançados para a previsão de resistência de ligações adesivas (Thesis) Arguer	Tiago Adelino Brandão Fernandes (Master) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal

Association member

	Society Organization name	Role
2011/12/15 - Current	Associação Portuguesa de Adesão e Adesivos (APAA)	Membro fundador

Committee member

	Activity description Role	Institution / Organization
2022 - Current	Editor-in-Chief: Engineering Manufacturing Letters (EML)	Universidade do Porto Faculdade de Engenharia, Portugal
2022 - Current	Member of the editorial board: Discover Mechanical Engineering (Springer) Member
2021 - Current	Member of the editorial board: Materials (MDPI) Member
2020 - Current	Member of the editorial board of the JAJP (Journal of Advanced Joining Processes) journal
2018/07/16 - Current	Member of the editorial board of the JMDA (Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications) journal. Member

Consulting

	Activity description	Institution / Organization
2017/09/01 - Current	JOHN DEERE (Moline, USA) Study of the small glass beads influence (used to ensure the thickness of the adhesive) on the mechanical behaviour (elasto-plastic properties and fracture) of an adhesive subject to quasi-static and fatigue loads.
2016/07/01 - 2017/01/31	BICAFE (São Pedro da Cova, Portugal) Adhesion study between a coffee pod and the film that seals the coffee inside the pod.
2015/12/01 - 2016/12/31	HONDA R&D Co., Ltd. (Saitama, Japan) •Mode I, II and mixed mode (I+II) fracture energy tests of 3 types of adhesives for automotive industry.
2014/06/01 - 2015/06/30	BOSCH (Cacia, Portugal) Study of glass / aluminum bonding in an heater.
2014/09/01 - 2015/01/31	AMTROL (Guimarães, Portugal) Study of adhesion between HDPE and composite (PP + glass).
2014/01/01 - 2014/01/31	OLI Oliveira & Irmão Sa (Aveiro, Portugal) Problems of adhesion between a glass and a piece of plastic in the construction of a cistern.
2012/09/01 - 2012/12/31	NAGASE CHEMTEX (Osaka, Japan) • Mode I and Mode II frature tests of an adhesive developed for the manufacture of wind turbines, September - December 2012.
2012/11/01 - 2012/11/30	COLEP (Vale de Cambra, Portugal) Adhesion problems of metallic packaging cans.

Journal scientific committee

	Journal title (ISSN)	Publisher
2020 - Current	Marine Structures
2019/01/22 - Current	Journal of CO2 Utilization (2212-9820)	Elsevier
2018/09/24 - Current	Engineering Fracture Mechanics (0013-7944)	Elsevier
2018/06/15 - Current	Composites Science and Technology (0266-3538)	Elsevier
2018/06/04 - Current	Thermochimica Acta (0040-6031)	Elsevier
2018/05/22 - Current	Journal of Adhesion Science and Technology (1568-5616)	Informa UK (Taylor & Francis)
2018/02/05 - Current	Journal of the Brazilian Society of Mechanical Sciences and Engineering (1678-5878)	Springer-Verlag
2017/12/31 - Current	Materials & Design (0264-1275)	Elsevier
2017/09/20 - Current	Aircraft Engineering and Aerospace Technology (0002-2667)	Emerald (MCB UP )
2017/09/11 - Current	Advances in aircraft and spacecraft science (2287-528X)	Techno-Press
2017/08/25 - Current	Materials Letters (0167-577X)	Elsevier
2017/04/27 - Current	Frattura ed Integrità Strutturale (1971-8993)	Gruppo Italiano Frattura
2016/11/01 - Current	Composites Part B Engineering (1359-8368)	Elsevier
2016/08/09 - Current	Aerospace Science and Technology (1270-9638)	Elsevier
2016/06/29 - Current	International Journal of Adhesion and Adhesives (0143-7496)	Elsevier
2015/11/23 - Current	Engineering Failure Analysis (1350-6307)	Elsevier
2015/08/31 - Current	Composite Structures (0263-8223)	Elsevier
2015/07/07 - Current	Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2041-3076)	SAGE Publications
2015/01/06 - Current	Applied Adhesion Science (2196-4351)	Springer (Biomed Central Ltd.)
2014/07/29 - Current	The Journal of Adhesion (1545-5823)	Informa UK (Taylor & Francis)