???global.info.a_carregar???
Dr. Ali Khalfallah is a Senior Researcher in the fields of Mechanical Engineering and Intelligent Manufacturing at CEMMPRE, University of Coimbra. He obtained his Ph.D. in Mechanical Engineering from Université de Tunis El Manar in 2004, with degree recognition from the University of Coimbra in 2019. Formerly the head of the Department of Mechanical Engineering at the University of Sousse in Tunisia, Dr. Khalfallah has been actively involved in numerous international research projects, such as RDForming, SPSuF, MT4MOBI, and NSOMESMEF, funded by the Foundation for Science and Technology (FCT) and the Ministry of Higher Education. His supervision of many Ph.D. candidates and master's students highlights his strong commitment to mentoring and advancing research in his field. Dr. Khalfallah’s expertise spans modeling and simulation of material behavior and structures, materials characterization, and process optimization, with a particular focus on sustainable materials development and green manufacturing technologies. He has also made significant contributions in thin films and nanomaterials research using nano-instrumented techniques coupled with simulation and machine learning approaches. Recently, he has expanded his work into the field of Tribology to better understand the tribological behaviour of materials through the modelling and simulation approaches. In addition to his research, Dr. Khalfallah serves as an Editorial Board Member for Modeling and Simulation in Engineering, Wiley Journal (ISSN: 1687-5605) and is a recognized reviewer for over 30 prestigious scientific journals. In 2023, he was honored with the "IOP Trusted Reviewer" status for his contributions to academic peer review. His editorial work includes the coordination of special issues for Machines, Crystals, Coatings (MDPI) and Welding International journals on emerging topics in cutting-edge research. Dr. Khalfallah has a respectable publication record, with 54 scientific publications, and Editorial papers for two books, including 35 articles in peer-reviewed journals, as well as contributions to books and patents for a total citation of 472 and h-index 12. He has been actively involved in the organization of several international conferences, serving on scientific committees for events such as ICR MDA&M, MSAM, and CMS. Furthermore, he has delivered around 20 keynote speeches at International Conferences, including IDDRG and ESAFORM, among others.
Read full resume ↓
Identification

Personal identification

Full name
ALI KHALFALLAH

Citation names

  • KHALFALLAH, ALI

Author identifiers

Ciência ID
8D17-18C9-EF2F
ORCID iD
0000-0002-3234-8795
Google Scholar ID
https://goo.gl/uovGu7
Researcher Id
F-1982-2014
Scopus Author Id
55638726900

Email addresses

  • ali.khalfallah@dem.uc.pt (Professional)

Addresses

  • Departamento de Engenharia Mecânica Faculdade de Ciências e Tecnologia Pólo 2 da Universidade de Coimbra Rua Luís Reis Santos Pinhal de Marrocos, 3030 - 788, COIMBRA, COIMBRA, Portugal (Professional)

Websites

Knowledge fields

  • Engineering and Technology - Mechanical Engineering - Applied Mechanics

Languages

Language Speaking Reading Writing Listening Peer-review
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
French (Mother tongue)
Arab Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Portuguese Intermediate (B1) Intermediate (B1) Intermediate (B1) Intermediate (B1)
Education
Degree Classification
2015/06/05
Concluded
 Accreditation to supervise research (HDR) (Título de Agregado)
Major in Mechanical Engineering
Université de Sousse, Tunisia
"Model-Experience Interactions and Parametric Identification Strategies Applied to Sheet and Tube Metal Forming Processes" (THESIS/DISSERTATION)
 Approuved with honorable Distinction
2004/02/14
Concluded
 Identification of Elastoplastic Material Behaviour from Inhomogeneous Tests and Numerical Simulations (Doutoramento)
Major in Mechanical Engineering
Université de Tunis El Manar Faculté des Sciences de Tunis, Tunisia
"Identification of elastoplastic material behaviour from inhomogeneous tests and numerical simulations" (THESIS/DISSERTATION)
 Approuved with honorable Distinction (15-18)/20
1997
Concluded
 Correlation Between the Evolution of Microstructure and Macroscopic Behaviour of Sheets for Deep Drawing Processes (DEA)
Major in Mechanical Engineering
Université de Tunis El Manar Faculté des Sciences de Tunis, Tunisia
"Correlation between the evolution of microstructure and macroscopic behaviour of sheets in deep drawing" (THESIS/DISSERTATION)
 Good "Assez Bien"(12-14)/20
1994
Concluded
 n/a (Licenciatura)
Université de Monastir, Tunisia
"n/a" (THESIS/DISSERTATION)
Affiliation

Science

Category
Host institution 		Employer
2022 - Current Visiting Researcher (Research) Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2019/11/08 - 2022/11/30 Contracted Researcher (Research) Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2013/10/31 - 2014/10/30 Postdoc (Research) Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal

Teaching in Higher Education

Category
Host institution 		Employer
2016 - 2022 Associate Professor (University Teacher) Université de Sousse, Tunisia
Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2007 - 2016 Assistant Professor (University Teacher) Université de Sousse, Tunisia
Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
1998/09/15 - 2003/09/14 Assistant (University Teacher) Université de Monastir, Tunisia
Université de Monastir, Tunisia

Positions / Appointments

Category
Host institution 		Employer
2016 - 2019 Organic Unit Director Université de Sousse, Tunisia
Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia

Others

Category
Host institution 		Employer
2003/09/15 - 2007/09/14 ASSISTANT LECTURER Université de Sousse, Tunisia
Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
Projects

Grant

Designation Funders
2018 - 2021 SPSuF: Forming Processes and Surface Finishing
LGM-MA05
Researcher
Direction Générale de la Recherche Scientifique et Technique, Tunisia
Concluded
2013/10/31 - 2014/10/30 MT4MOBI-Materials and Technologies for Greener Manufacturing and Products Applied to Mobility
CENTRO-07-0224-FEDER-002001
Post-doc Fellow
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Concluded
2006 - 2008 Constitutive behaviour identification methods applied for sheet metal forming
6/TP/08
Principal investigator
Université de Monastir, Tunisia

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Concluded
2005 - 2006 Numerical simulations and optimization methods for sheet metal forming
1/04/TP
Researcher
Université de Monastir, Tunisia

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Concluded
2000 - 2001 CMCU: Comité Mixte de Coopération Universitaire
CMCU2000
Université de Technologie de Troyes, France

Université de Monastir, Tunisia
Concluded

Contract

Designation Funders
2019/11/08 - 2022/11/12 RDFORMING: Robust Design of Sheet Metal Forming Processes to Reduce Productivity Losses
IT057-19-7863
Researcher
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded

Other

Designation Funders
2025/03 - Current Sustainable and Advanced Solutions for Electric Transportation-Related Integrity Problems
MPr-12-2023 - ICDT/2023
Researcher
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Under evaluation
Outputs

Publications

Book
  1. KHALFALLAH, ALI. Comprendre les principes fondamentaux de la résistance des matériaux. Edilivre. 2024.
    Published
  2. KHALFALLAH, ALI. Identification de lois de comportement élastoplastiques anisotropes: Application à la simulation numérique par la méthode des éléments finis du procédé d’emboutissage des tôles métalliques. Editions Universitaires Européennes. 2011.
    Published
Book chapter
  1. Nouira, Mariem; Oliveira, Marta C.; KHALFALLAH, ALI; Neto, Diogo M.; Alves, José L.; Menezes, Luís F.. "The Role of the Yield Criterion on Stress and Strain Paths Under Non-proportional Loadings". In Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity, 663-673. Springer Nature Switzerland, 2024.
    Published • 10.1007/978-3-031-42093-1_64
  2. KTARI, Zied; KHALFALLAH, ALI; Carlos, Leitão. "Non-conventional Tensile Specimen for Mechanical Characterization of Tubular Materials". In Design and Modeling of Mechanical Systems. Springer, 2023.
    Published
  3. KTARI, Zied; KHALFALLAH, ALI; Carlos Leitao. Corresponding author: KHALFALLAH, ALI. "Development of Ring Hoop Shear Test for the Mechanical Characterization of Tubular Materials". In Advances in Mechanical Engineering and Mechanics II, 119-125. Springer International Publishing, 2021.
    10.1007/978-3-030-86446-0_16
  4. Hannachi, Nasra; KHALFALLAH, ALI; Carlos Leitao; Rodrigues, Dulce Maria. Corresponding author: KHALFALLAH, ALI. "Comparison Between ALE and CEL Finite Element Formulations to Simulate Friction Stir Spot Welding". In Advances in Mechanical Engineering and Mechanics II, 277-284. Springer International Publishing, 2021.
    10.1007/978-3-030-86446-0_36
  5. Meriem, Nouira; Marta, Oliveira; KHALFALLAH, ALI; José, Alves; Luís, Menezes. Corresponding author: KHALFALLAH, ALI. "Analysis on the Dependence of the Fracture Locus on the Pressure and the Lode Angle". In Design and Modeling of Mechanical Systems - IV, 545-557. Tunisia: Springer International Publishing, 2020.
    10.1007/978-3-030-27146-6_59
  6. Nouira, Meriem; Oliveira, Marta; KHALFALLAH, ALI; Alves, José; Menezes, Luís. Corresponding author: KHALFALLAH, ALI. "The Effect of the Loading Path History on the Fracture Loci". In Advances in Mechanical Engineering, Materials and Mechanics, 277-290. Springer International Publishing, 2020.
Conference paper
  1. KHALFALLAH, ALI; KTARI, Zied; Menezes, Luís Filipe. Corresponding author: KHALFALLAH, ALI. "Intelligent Approach for Accurately Identifying Constitutive Material Parameters of Anisotropic Tubular Materials". Paper presented in ESAFORM 2025, Paestum, 2025.
    Accepted
  2. KHALFALLAH, ALI; Aissani, L ; Silva, R; Vilhena, Luís; Ramalho, Amílcar. "Friction and wear of DLC coatings lubricated with graphene oil suspensions". Paper presented in LUBMAT-IBERTRIB-2024, KURSAAL, SAN SEBASTIAN, 2024.
    Published
  3. Zied, Ktari; KHALFALLAH, ALI; Carlos, Leitão. "Design of a new tensile specimen for mechanical characterization of tubular materials". Paper presented in International Congress on Mechanics, Mechatronics and Materials, Sousse, 2019.
    Published
  4. Meriem, Nouira; Marta, OLIVEIRA; KHALFALLAH, ALI; José, ALVES; Luís, MENEZES. "The Effect of the Loading Path History on the Fracture Loci". 2019.
    Published
  5. Nasra Hannachi; KHALFALLAH, ALI; Carlos Leitão; Dulce Rodrigues. "Application of the Arbitrary Lagrangian Eulerian (ALE) method to the modeling of Friction Stir Welding". Paper presented in 8th Conference on Design and Modeling of Mechanical Systems, 2019, Hammamet, 2019.
    Published
  6. Zied, Ktari; KHALFALLAH, ALI. "Optimisation d’une éprouvette de traction sur anneau pour la caractérisation mécanique des tubes métalliques". Paper presented in Congré Tunisien de Mécanique COTUME'2018, Hammamet, 2018.
    Published
  7. KHALFALLAH, ALI; Med, Tlijani. "Experimental and numerical study of tubular material by lateral indentation test". Paper presented in Conference on Design and Modeling of Mechanical Systems, CMSM'2015, Hammamet, 2015.
    Published
  8. KHALFALLAH, ALI; Temim, Zribi. "Etude comparative pour la caractérisation des tubes hydroformés". Paper presented in ongré Tunisien de Mécanique COTUME'2014, Sousse, 2014.
    Published
  9. KHALFALLAH, ALI; S, Zouegui. "Identification des lois de comportement des tôles à partir des essais de gonflement Hydraulique". Paper presented in Conference on Design and Modeling of Mechanical Systems, CMSM'2013, Djerba, 2013.
    Published
  10. Temim, Zribi; KHALFALLAH, ALI; H. BelHadjsalah. "Analyse de la formabilité en hydroformage des tubes". Paper presented in Conference on Design and Modeling of Mechanical Systems, CMSM'2013, Djerba, 2013.
  11. KHALFALLAH, ALI. "Détermination du comportement plastique d’un joint soudé de tubes à partir de l’essai de traction simple et des mesures de la microdureté". Paper presented in Journées Scientifiques en Mécanique et Matériaux JSTMM'2010, Hammamet, 2010.
    Published
  12. KHALFALLAH, ALI; Temim, Zribi; H. BelHadjsalah; Zribi, T.; Belhadjsalah, H.. "Inverse method for flow stress parameters identification of tube hydroforming considering anisotropy". Paper presented in 7th EUROMECH Solid Mechanics Conference, Lisbon, 2009.
    Published • 10.1504/IJMMS.2011.043081
  13. Temim, Zribi; KHALFALLAH, ALI; Belhadjsalah, Hédi. "Analyse de l'effet des paramètres matériaux sur l'hydroformage des tubes : Premier Congrès Tunisien de Mécanique". Paper presented in COTUME 2008, 2008.
    Published
  14. KHALFALLAH, ALI; H. BelHadjsalah; Alves, José Luís. "Strategies for parameter identification". Paper presented in 9th ESAFORM'2006, Glasgow, 2006.
    Published
  15. KHALFALLAH, ALI. "Identification paramétrique et analyse de sensibilité". Paper presented in 2eme JSTMM'2002, Monastir, 2002.
    Published
  16. KHALFALLAH, ALI. "Anisotropic parameter identification using inverse method". Paper presented in 4th International ESAFORM’2001, Liège, 2001.
    Published
Edited book
  1. KHALFALLAH, ALI; Zohra Benzarti. Recent Advances in the Development of Thin Films. Switzerland: Multidisciplinary Digital Publishing Institute (MDPI). 2024.
    Published • 10.3390/books978-3-7258-1856-3 • Editor
  2. KHALFALLAH, ALI; Mahmoud, Moradi; Beygi, Reza. Welding and Joining of Metallic Materials: Microstructure and Mechanical Properties. Basel, Switzerland: Multidisciplinary Digital Publishing Institute (MDPI). 2024.
    Published • 10.3390/books978-3-7258-2496-0 • Editor
Journal article
  1. Zied, Ktari; KHALFALLAH, ALI. Corresponding author: KHALFALLAH, ALI. "Design and validation of a new ring hoop plane strain test for characterizing the anisotropic plastic behavior of tubular materials". International Journal of Solids and Structures (2024): https://doi.org/10.1016/j.ijsolstr.2024.112869.
    10.1016/j.ijsolstr.2024.112869
  2. KHALFALLAH, ALI; Khalfallah, Amine; Zohra Benzarti. Corresponding author: KHALFALLAH, ALI. "Identification of Elastoplastic Constitutive Model of GaN Thin Films Using Instrumented Nanoindentation and Machine Learning Technique". Coatings (2024): https://doi.org/10.3390/coatings14060683.
    10.3390/coatings14060683
  3. Zohra Benzarti; KHALFALLAH, ALI; Bougrioua, Zahia; Evaristo, Manuel; Cavaleiro, Albano. Corresponding author: KHALFALLAH, ALI. "Understanding the influence of physical properties on the mechanical characteristics of Mg-doped GaN thin films". Materials Chemistry and Physics 307 (2023): 128182-128182. http://dx.doi.org/10.1016/j.matchemphys.2023.128182.
    10.1016/j.matchemphys.2023.128182
  4. KHALFALLAH, ALI; Zohra Benzarti. Corresponding author: KHALFALLAH, ALI. "Mechanical Properties and Creep Behavior of Undoped and Mg-Doped GaN Thin Films Grown by MetalOrganic Chemical Vapor Deposition". Coatings (2023): https://doi.org/10.3390/coatings13061111.
    10.3390/coatings13061111
  5. Nouira, Mariem; Oliveira, Marta C.; KHALFALLAH, ALI; José Luís Alves; Menezes, Luís Filipe. "Comparative fracture prediction study for two materials under a wide range of stress states using seven uncoupled models". Engineering Fracture Mechanics 279 (2023): 108952-108952. http://dx.doi.org/10.1016/j.engfracmech.2022.108952.
    10.1016/j.engfracmech.2022.108952
  6. Boughrara, Najla; Zohra Benzarti; KHALFALLAH, ALI; Oliveira, Joao Carlos; Evaristo, Manuel; Cavaleiro, Albano. Corresponding author: KHALFALLAH, ALI. "Thickness-dependent physical and nanomechanical properties of AlxGa1-xN thin films". Materials Science in Semiconductor Processing 151 (2022): 107023-107023. http://dx.doi.org/10.1016/j.mssp.2022.107023.
    10.1016/j.mssp.2022.107023
  7. Armando E. Marques; Mario A. Dib; KHALFALLAH, ALI; Martinho S. Soares; Marta C. Oliveira; José V. Fernandes; Bernardete M. Ribeiro; Prates, Pedro A.. "Machine Learning for Predicting Fracture Strain in Sheet Metal Forming". Metals (2022): https://doi.org/10.3390/met12111799.
    10.3390/met12111799
  8. KHALFALLAH, ALI. "New approach for the identification of anisotropy material parameters using hydraulic bulge tests". IOP Conference Series: Materials Science and Engineering 1238 1 (2022): 012003-012003. http://dx.doi.org/10.1088/1757-899x/1238/1/012003.
    10.1088/1757-899x/1238/1/012003
  9. Boughrara, Najla; Zohra Benzarti; KHALFALLAH, ALI; Evaristo, Manuel; Cavaleiro, Albano. Corresponding author: KHALFALLAH, ALI. "Comparative study on the nanomechanical behavior and physical properties influenced by the epitaxial growth mechanisms of GaN thin films". Applied Surface Science 579 (2022): 152188-152188. http://dx.doi.org/10.1016/j.apsusc.2021.152188.
    10.1016/j.apsusc.2021.152188
  10. Hannachi, Nasra; KHALFALLAH, ALI; Leitao, Carlos; Rodrigues, Dulce Maria. "Thermo-mechanical modelling of the Friction Stir Spot Welding process: Effect of the friction models on the heat generation mechanisms". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2022): https://doi.org/10.1177/14644207211070965.
    10.1177/14644207211070965
  11. KHALFALLAH, ALI. "Growth temperature effect on physical and mechanical properties of nitrogen rich InN epilayers". Journal of Alloys and Compounds 885 (2021): 160951-160951. http://dx.doi.org/10.1016/j.jallcom.2021.160951.
    10.1016/j.jallcom.2021.160951
  12. KHALFALLAH, ALI. "Effect of input variables uncertainty in free tube hydroforming process". ESAFORM 2021 (2021): http://dx.doi.org/10.25518/esaform21.2364.
    10.25518/esaform21.2364
  13. KTARI, Zied; Leitao, Carlos; Prates, Pedro A.; KHALFALLAH, ALI. Corresponding author: KHALFALLAH, ALI. "Mechanical design of ring tensile specimen via surrogate modelling for inverse material parameter identification". Mechanics of Materials 153 (2021): 103673. http://dx.doi.org/10.1016/j.mechmat.2020.103673.
    Published • 10.1016/j.mechmat.2020.103673
  14. KHALFALLAH, ALI; KTARI, Zied; Leitao, Carlos; Fernandes, José Valdemar; KHALFALLAH, ALI. "New mandrel design for ring hoop tensile testing". Experimental Techniques (2021): http://hdl.handle.net/10400.21/14811.
    10.1007/s40799-021-00462-4
  15. Khalfallah, Ali; Oliveira, Marta Cristina; Alves, José Luís; Menezes, Luís Filipe. "Constitutive parameter identification of CB2001 yield function and its experimental verification using tube hydroforming tests". International Journal of Mechanical Sciences 185 (2020): 105868. http://dx.doi.org/10.1016/j.ijmecsci.2020.105868.
    10.1016/j.ijmecsci.2020.105868
  16. Zribi Temim; KHALFALLAH, ALI. "Numerical investigation of tube hyroforming of TWT using Corner Fill Test". AIP Conference Proceedings 160 (2018): 150019-1-150019-6.
    Published • https://doi.org/10.1063/1.5035026
  17. Benzarti, Z.; Sekrafi, T.; Bougrioua, Z.; KHALFALLAH ALI.; El Jani, B.. "Effect of SiN Treatment on Optical Properties of In(x)Ga(1-x)N/GaN MQW Blue LEDs". Journal of Electronic Materials 46 7 (2017): 4312-4320.
    Published • 10.1007/s11664-017-5383-2
  18. Z. Benzarti; M. Khelifi; A. Khalfallah; B. El Jani; Zohra Benzarti; M Khelifi; KHALFALLAH, ALI; KHALFALLAH, ALI. "Assessment of refractive index changes by spectral reflectance in the first stages of AlxGa1-xN layer growth using SiN treatment". Journal of Materials Science: Materials in Electronics 27 (2016): 6336–6-6336–6. https://app.dimensions.ai/details/publication/pub.1002846749.
    Published • 10.1007/s10854-016-4568-4
  19. Khalfallah, Ali; Oliveira, Marta Cristina; Alves, José Luís; Zribi, Temim; Belhadjsalah, Hédi; Menezes, Luís Filipe; Alves, J. L.. "Mechanical characterization and constitutive parameter identification of anisotropic tubular materials for hydroforming applications". International Journal of Mechanical Sciences 104 (2015): 91-103. http://dx.doi.org/10.1016/j.ijmecsci.2015.09.017.
    Published • 10.1016/j.ijmecsci.2015.09.017
  20. Zribi, Temim; Khalfallah, Ali; Salah, Hedi Belhadj. "A Comparative Study of the Identification Methods for Tube Hydroforming Process". Key Engineering Materials 651-653 (2015): 169-174.
    Published • 10.4028/www.scientific.net/kem.651-653.169
  21. KHALFALLAH, ALI; Alves, José Luís; Oliveira, Marta Cristina; Menezes, Luís Filipe. Corresponding author: KHALFALLAH, ALI. "Influence of the characteristics of the experimental data set used to identify anisotropy parameters". Simulation Modelling Practice and Theory 53 (2015): 15-44. https://doi.org/10.1016/j.simpat.2015.02.007.
    Published • 10.1016/j.simpat.2015.02.007
  22. KHALFALLAH, ALI. Corresponding author: KHALFALLAH, ALI. "Experimental and numerical assessment of mechanical properties of welded tubes for hydroforming". Materials and Design 56 (2014): 782-790. https://doi.org/10.1016/j.matdes.2013.11.051.
    Published • https://doi.org/10.1016/j.matdes.2013.11.051
  23. Khalfallah, A.; Zribi, T.; Belhadjsalah, H.. "Application of tube hydroforming in square cross-section die for inverse identification method validation". Key Engineering Materials 554-557 (2013): 966.
    Published • 10.4028/www.scientific.net/KEM.554-557.966
  24. Zribi, T.; Khalfallah, A.; BelHadjSalah, H.. "Experimental characterization and inverse constitutive parameters identification of tubular materials for tube hydroforming process". Materials and Design 49 (2013): 866-877.
    Published • 10.1016/j.matdes.2013.02.077
  25. Hédi Bel Hadj Salah; KHALFALLAH, ALI; Abdelwaheb Dogui. "Parameter Identification and Sensitivity Analysis". International Journal of Forming Processes (2005):
    Published
  26. KHALFALLAH, ALI; Salah, H.B.H.; Znaidi, A.; Dogui, A.; Sidoroff, F.. "Constitutive parameters identification for elastoplastic materials in finite deformation". Journal de Physique IV (Proceedings) (2003): 3-10.
    Published
  27. KHALFALLAH, ALI; Salah, H.B.H.; Dogui, A.. "Anisotropic parameter identification using inhomogeneous tensile test". European Journal of Mechanics, A/Solids 21 6 (2002): 927-942.
    Published • 10.1016/S0997-7538(02)01246-9
Journal issue
  1. KHALFALLAH, ALI; Dhanesh G. Mohan; Elango Natarajan; Abdollah Saboori. "Emerging Trends in Hybrid Welding and Hybrid Additive Manufacturing". Welding International (2025): https://think.taylorandfrancis.com/special_issues/emerging-trends-in-hybrid-welding-and-hybrid-additive-manufacturing/.
    In press • Invited editor
  2. KHALFALLAH, ALI; Beygi, Reza. "Welding and Joining of Metallic Materials: Microstructure and Mechanical Properties, 2nd Edition". Crystals (2025): https://www.mdpi.com/journal/crystals/special_issues/F11TPDY50B.
    Accepted • Invited editor
  3. KHALFALLAH, ALI; Leitao, Carlos. "Sustainable Manufacturing and Green Processing Methods, 2nd Edition". Machines (2025): https://www.mdpi.com/journal/machines/special_issues/7PLG1RE8PY.
    Accepted • Invited editor
  4. KHALFALLAH, ALI; Zohra Benzarti. "Machine Learning-Driven Advancements in Coatings". Coatings (2025): https://www.mdpi.com/journal/coatings/special_issues/7BI967O08Y.
    Accepted • Invited editor
  5. KHALFALLAH, ALI; Leitao, Carlos. "Sustainable Manufacturing and Green Processing Methods, 1st Edition". Machines (2024): https://www.mdpi.com/journal/machines/special_issues/5XNSF3BW3F.
    Published • Invited editor
  6. KHALFALLAH, ALI; Zohra Benzarti. "Recent Advances in the Development of Thin Films". Coatings (2024): https://www.mdpi.com/journal/coatings/special_issues/Thin_Film.
    Published • Invited editor
  7. KHALFALLAH, ALI; Moradi, Mahmoud; Beygi, Reza. "Welding and Joining of Metallic Materials: Microstructure and Mechanical Properties, 1st Edition". Crystals (2024): https://www.mdpi.com/journal/crystals/special_issues/D36F0198NS.
    Published • Invited editor
Preface / Postscript
  1. Zohra Benzarti; KHALFALLAH, ALI. Corresponding author: KHALFALLAH, ALI. "Recent Advances in the Development of Thin Films". Preface to Recent Advances in the Development of Thin Films, edited by Ali KHALFALLAH. Basel, Switzerland. 2024.
    Published • https://doi.org/10.3390/coatings14070878
  2. KHALFALLAH, ALI. Corresponding author: KHALFALLAH, ALI. "Welding and Joining of Metallic Materials: Microstructure and Mechanical Properties". Preface to Welding and Joining of Metallic Materials: Microstructure and Mechanical Properties. Basel, Switzerland: Multidisciplinary Digital Publishing Institute (MDPI). 2024.
    Published • https://doi.org/10.3390/cryst14100839
  3. KHALFALLAH, ALI; Carlos Leitao. Corresponding author: KHALFALLAH, ALI. "Sustainable Manufacturing and Green Processing Methods". Preface to Sustainable Manufacturing and Green Processing Methods. Basel, Switzerland: Multidisciplinary Digital Publishing Institute (MDPI). 2024.
    Published • https://doi.org/10.3390/machines12110815
Thesis / Dissertation
  1. Khalfallah, Ali. "Identification of Elastoplastic Material Behaviour from Inhomogeneous Tests and Numerical Simulations". PhD, Université de Tunis El Manar Faculté des Sciences de Tunis, 2004. http://hdl.handle.net/10316/87731.

Intellectual property

Patent
  1. KHALFALLAH, ALI. 2021. "Dispositif Experimental pour la caractérisation mécanique des tubes dans la direcction circonférentielle". Tunisia.
    Allowed
Activities

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2017 - Current Numerical Simulation of Friction Stir Welding Process: analysis of the influence of base materials plastic properties on weldability
Co-supervisor
 Mechanical engineering (PhD)
Université de Sousse, Tunisia

École Nationale d'Ingénieurs de Sousse, Tunisia

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2018 - 2023/01 Calibration of Ductile Fracture Models used in the numerical simulation of sheet metal forming processes (cotuelle)
Co-supervisor
 Mechanical engineering (PhD)
Université de Sousse, Tunisia

École Nationale d'Ingénieurs de Sousse, Tunisia

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2017 - 2022/01/22 Experimental and numerical study of modified Ring Hoop Tensile Test for mechanical characterization of anisotropic tubular materials
Supervisor
 Mechanical Engineering (PhD)
Université de Monastir, Tunisia

École Nationale d'Ingénieurs de Monastir, Tunisia
2021/02 - 2021/07/28 ANÁLISE ROBUSTA DA HIDROFORMAÇÃO DE TUBOS NUMA MATRIZ COM SECÇÃO TRANSVERSAL QUADRADA
Co-supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2021/02 - 2021/07/15 Avaliação de estratégias de identificação de parâmetros de leis constitutivas utilizando um número reduzido de ensaios experimentais: Aplicação ao processo de estampagen de chapas
Co-supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2019/03 - 2020/01/25 Identification of elastoplastic behavior of thin films using hybrid method, FEM Artificial Neural Network, supported by instrumented nanoindentation test
Supervisor
 Mechanical engineering (Master)
Université de Monastir, Tunisia

École Nationale d'Ingénieurs de Monastir, Tunisia
2017/02 - 2017/07/11 Modeling, simulation and optimization of a seat in composite materials of a UML aircraft
Supervisor
Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2014 - 2015/11/09 Identification of Constitutive Material Behavior using Bulge Tests for Sheet Metals
Supervisor
 Mechanical engineering (Master)
Université de Tunis Ecole Nationale Supérieure d'Ingénieurs de Tunis, Tunisia
2014 - 2015/01/16 Experimental and Numerical Study of the Mechanical Behavior of Tubular Materials Under Lateral Compression Tests
Supervisor
 Mechanical engineering (Master)
Université de Tunis Ecole Nationale Supérieure d'Ingénieurs de Tunis, Tunisia

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2023/09/28 - 2023/09/29 Organization member of the International Conference on Research of Mechanical Design Automation & Materials (2023/09/28 - 2023/09/29)
Conference (Member of the Organising Committee)
 ABCD Index Department of Mechanical Engineering , India
2019/03/15 - 2019/03/16 Organization & Participation of 24H Innovation contest (2019/03/15 - 2019/03/16)
Other (Member of the Organising Committee)
 Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia

Tunisian Union of Industry and Trading of Sousse, Tunisia
2018/12/01 - 2018/12/01 Organization of the National Hackathon (24h Conception competition) in the mechanical design of innovative products at ISSATSo (2018/12/01 - 2019/12/01)
Other (Member of the Organising Committee)
 Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2018/10/03 - 2018/10/05 Organising member of the event Integration and Open House Day, "Journée d'Intégration et Portes Ouvertes": JIPO'2018. An event designed to integrate new students and to welcome the public and students into our academic Institut. (2018/10/03 - 2018/10/05)
Exhibition (Member of the Organising Committee)
 Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia

Event participation

Activity description
Type of event 		Event name
Institution / Organization
2023 - Current CEMMPRE às 5 Actively participate in the discussion by sharing my insights, asking questions, and engaging with others' viewpoints.
Seminar
 CEMMPRE às 5
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2024/10/08 - 2024/11/26 I actively participated in problem-solving activities in the Meetings to address the challenging questions raised by I-TRIBOMAT; Three meetings (of 2 hours each one) have been held in the CEMMPRE with Prof. Amilcar Ramalho to address the Tribology Challenges. I participated in discussions and contributed to the preparation of the report, which encompasses the answers that I-Tribomat seeks in this challenge.
Round table
 TRIBOLOGY CHALLENGE: Harmonization of Reciprocating Friction Testing Practices
I-TRIBOMAT: The European Tribology Center, Austria
2024/10/04 - 2024/10/04 ESAFORM Webinars: Material Testing 2.0 for anisotropic plasticity, Dr. Fabrice Pierron, R&D Director, MatchID, Belgium. The session reinforced my understanding of innovative approaches to material behavior identification, which aligns closely with my research expertise in material modeling and testing, and inspired potential applications in my ongoing projects.
Seminar
 ESAFORM Webinars
ESAFORM , France
2024/09/24 - 2024/09/24 Wiley Editor Resources: Innovation and Technology in Peer Review 60 minute webinar featuring a panel discussion on innovation and technology in peer review with three expert speakers. I engaged in discussions on the integration of advanced technologies in peer review processes.
Seminar
 Innovation and Technology in Peer Review
John Wiley & Sons Inc, United Kingdom
2024/07/24 - 2024/07/24 ESAFORM Webinars: Isotropic and anisotropic plasticity, presented by Prof. Frédéric Barlat. Interactive Engagement by asking questions during the Q&A session to deepen my understanding of specific topics, raised by Prof. Barlat in his presentation.
Seminar
 ESAFORM Webinars
ESAFORM , France
2024/07/10 - 2024/07/10 Wiley Editor Webinar: How AI can help with your editorial workflows. Actively following the discussion to understand the latest advancements in technology-driven peer review, such as AI applications and reviewer matching systems.
Seminar
 Wiley Editor Webinar: How AI can help with your editorial workflows
John Wiley & Sons Inc, United Kingdom
2024/06/25 - 2024/06/25 Wiley Editor Webinar: Open Access in Practice
Seminar
 Wiley Editor Webinar
Wiley-VCH GmbH, Germany
2024/06/12 - 2024/06/12 “XRD Insights – Explorando a difração de raios-X e as suas aplicações”,
Workshop
 XRD Insights – Explorando a difração de raios-X e as suas aplicações
Instituto Pedro Nunes, Portugal
2024/05/22 - 2024/05/22 MatchID Webinar: Digital Twin in DIC for model validation and material identification
Seminar
 Digital Twin in DIC for model validation and material identification
MatchID Nv, Belgium
2024/01/22 - 2024/01/22 ESAFORM Webinars: Towards more sustainable manufacturing: Forming as industrial symbiosis route for material recovery, presented by Prof. Joost Duflou
Seminar
 Towards more sustainable manufacturing: Forming as industrial symbiosis route for material recovery, presented by Prof. Joost Duflou
ESAFORM , France
2023/09/27 - 2023/09/27 Wiley Webinars: Peer Review and The Future of Publishing
Seminar
 Peer Review and The Future of Publishing
Wiley-VCH GmbH, Germany
2023/07/23 - 2023/07/23 TRIBOLOGY – AN EXPERIMENTAL APPROACH. I actively engaged in the seminar by asking questions about the experimental approaches in tribology, especially how they complement numerical simulations in understanding material behavior and frictional interactions. Additionally, I have networked with other experts, exchanging ideas on tribology and exploring potential areas for collaboration in future research projects.
Seminar
 TRIBOLOGY – AN EXPERIMENTAL APPROACH
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2023/07/14 - 2023/07/14 ESAFORM Webinars: About the virtual design of materials with Prof. Anne Marie Habraken (ULiège), The presentation introduced model advantages and limitations, their identification and validation.
Seminar
 ESAFORM Webinars
ESAFORM , France
2023/06/28 - 2023/06/28 SPM Webinars: Os métodos científicos utilizados para o estudo do Sudário de Turim
Seminar
 Os métodos científicos utilizados para o estudo do Sudário de Turim
Sociedade Portuguesa de Materiais, Portugal
2023/05/31 - 2023/05/31 Ciência e Politica Publica: Como conseguir Pontes? In this workshop, I actively engaged in discussions and activities that bridge the gap between scientific research and public policy.
Workshop
 Ciência e Politica Publica: Como conseguir Pontes?
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2023/05/10 - 2023/05/10 Seminário sobre Soldadura
Seminar
 Seminário sobre Soldadura
Ordem dos Engenheiros, Portugal

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2023/04/19 - 2023/04/19 Workshop Da Gestão à Experiência do Tempo
Workshop
 Workshop Da Gestão à Experiência do Tempo
2023/03/15 - 2023/03/15 Attendance and participation of the Workshop SusSurf2023
Workshop
 Surface Engineering for sustainable Industrial Applications
Instituto Pedro Nunes, Portugal
2023/01/10 - 2023/01/10 Metals webinars: High-Entropy Alloys with Special Microstructures and Unique Properties, presented by Prof. Yong Zhang, University of Science and Technology Beijing, China
Seminar
 High-Entropy Alloys with Special Microstructures and Unique Properties
MDPI AG, Switzerland
2022/11/10 - 2022/11/10 WEBINAR INDENTATION 2022
Seminar
Groupe Indentation Multi-Echelle (GIME), France
2022/07/08 - 2022/07/08 Annual CEMMPRE Meeting held on 08 July 2022 in the FCTUC amphitheater
Meeting
 Annual CEMMPRE Meeting
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2022/02/25 - 2022/02/25 Meeting of the scientific committee of CEMMPRE
Round table
 Meeting of the scientific committee
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2022/02/07 - 2022/02/07 Participation in “brainstorming” meeting in the department of mechanical engineering of FCTUC, for the proposal submission of FCT projects 2022).
Round table
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2021/09/30 - 2021/09/30 Participation in Meeting of the project RDForming (UCoimbra-INEGI) to discuss the progress of the project.
Round table
2021/09/30 - 2021/09/30 Participation in Meeting of the project ifDamagElse (UCoimbra-INEGI) for the evaluation of the Project progress
Round table
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2021/07/16 - 2021/07/16 Annual CEMMPRE Meeting held on 16 July 2021 in the FCTUC amphitheater
Meeting
 Annual CEMMPRE Meeting
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2017/05/25 - 2017/05/25 H2020 dissemination day on “Advanced Nanotechnologies and Materials in the H2020 Program
Seminar
 H2020 Info Day
CRMN, Technopôle de Sousse, Tunisia

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2019/06/21 Etude expérimentale et numérique du formage d'un matériau composite sandwich :application au retour élastique
(Thesis) Main arguer
 Raja Ouled Ahmed Ben Ali (PhD)
Université de Sousse, Tunisia
2019/06/15 Habilitation Universitaire à Diriger la Recherche (Agregation)
Thesis Member
 Ajmi Houidi (Aggregation)
Université de Sousse, Tunisia
2019/05/03 Développement d'une approche de prévision de la tenue en fatigue à grand nombre de cycles des pièces traitées par grenaillage ultrason
Thesis Member
 Sondes Manchoul (PhD)
Université de Sousse, Tunisia

École Nationale d'Ingénieurs de Sousse, Tunisia
2018/12/18 Design study, simulation and automation of a system of transport of coils
President of the jury
 Saied Kods (Master)
Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2018/12/18 Improvement of the tinning process through a new design of the machine
(Thesis) Main arguer
 Belkhouja Amani (Master)
Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2018/12/18 Design and fabrication of a mini-extruder for 3D printer filaments
President of the jury
 Zamba Touati Hamed (Master)
Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2018/12/14 Comportement à la fatigue multiaxiale d'un matériaux présentant un défaut: approche fiabiliste
Thesis Member
 Marwa Saggar (PhD)
Université de Sousse, Tunisia

École Nationale d'Ingénieurs de Sousse, Tunisia
2018/12/07 Approche Probabiliste pour la Conception des Ressorts à Lames Paraboliques soumis à des Sollicitations de Fatigue Polycyclique
(Thesis) Main arguer
 Akram Atig (PhD)
Université de Sousse, Tunisia

École Nationale d'Ingénieurs de Sousse, Tunisia
2018/07/11 Study and Design of a device allowing the assembly and disassembly of worn watertight braids
President of the jury
 Bouassida Mohamed Karim (Master)
Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2018/07/10 Study and design of a profile bending machine
Supervisor
 Hadded Sinda (Master)
Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2018/07/10 Study and modeling of a distribution system for stranding machine Nie HOFFD631
Supervisor
 Ben Haj Slama (Master)
Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2018/06/23 Design of a rubber tube marking system
President of the jury
 Hadj Ammar Nada (Master)
Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2018/06/23 Study and design of a test bench equipped with a simulator
President of the jury
 Sfar Aida (Master)
Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2017/12/08 Analyse Fiabiliste de l¿Endommagement d'un Composite en Présence d'une Discontinuité Géométrique.
(Thesis) Main arguer
 Mhallah Maki (PhD)
Université de Sousse, Tunisia

École Nationale d'Ingénieurs de Sousse, Tunisia
2017/07/11 Modeling, simulation and optimization of a seat in composite materials of a UML aircraft
Supervisor
 Komti Mohamed (Master)
Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2016/06 International External Examiner (Title of the thesis: Improved inverse methods in the characterization of mechanical behavior of materials)
Thesis Member
 Erfan ESAADI (PhD)
University of Pretoria, South Africa

Ad Hoc journal article review

Journal title (ISSN) Publisher
2024 - Current Applied sciences (2076-3417) Multidisciplinary Digital Publishing Institute
2024 - Current International Journal of Material Forming (1960-6214) Springer Nature @ Editorial Manager
2024 - Current Lubricants (2075-4442) Multidisciplinary Digital Publishing Institute
2024 - Current Materials Science & Engineering A (0921-5093) Elsevier
2024 - Current Nanomaterials (2079-4991) Multidisciplinary Digital Publishing Institute
2024 - Current Ceramics International (0272-8842) Elsevier
2024 - Current Physica Scripta (1402-4896) IOP SCIENCE
2024 - Current Archive of Mechanical Engineering (0004-0738) Polish Academy of Sciences
2023 - Current Coatings (2079-6412) Multidisciplinary Digital Publishing Institute
2023 - Current Experimental Mechanics (0014-4851) Springer Nature @ Editorial Manager
2023 - Current Crystals (2073-4352) Multidisciplinary Digital Publishing Institute
2023 - Current International Journal of Pressure Vessels and Piping (0308-0161) Elsevier
2023 - Current Journal of Manufacturing and Materials Processing (2504-4494) Multidisciplinary Digital Publishing Institute
2023 - Current Materials Sciences and Technology (0267-0836) (Taylor &Francis Online)
2023 - Current Machines (2075-1702) Multidisciplinary Digital Publishing Institute
2022 - Current Advances in Materials and Processing Technologies (2374-068X) Taylor & Francis
2022 - Current International Journal of Lightweight Materials and Manufacture (2588-8404) Elsevier
2022 - Current International Journal of Structural Integrity (1757-9864) EMRAD
2022 - Current Micromachines (2072-666X) Multidisciplinary Digital Publishing Institute
2022 - Current Sustainability (2071-1050) Multidisciplinary Digital Publishing Institute
2021 - Current Buildings (2075-5309) Multidisciplinary Digital Publishing Institute
2021 - Current International Journal of Mechanical Sciences (0020-7403) Elsevier
2021 - Current Engineering Research Express (2631-8695) IOP Publishing
2021 - Current Materials (1996-1944) Multidisciplinary Digital Publishing Institute
2021 - Current Journal of the Brazilian Society of Mechanical Sciences and Engineering (1678-5878) Elsevier
2021 - Current Journal of Materials: Design and Applications (1464-4207) (SAGE Publishing)
2019 - Current Materials Research Express (2053-1591) IOP Publishing
2018 - Current Simulation: Transactions of the Society for Modeling and Simulation International (0037-5497) SAGE Publishing
2018 - Current Advances in Mechanical Engineering (1687-8140) SAGE Publishing
2016 - Current Materials & Design (0264-1275) Elsevier
2015 - Current Engineering Computations (0264-4401) EMRAD
2015 - Current Journal of Testing and Evaluation (0090-3973) ASTM International
2014 - Current Simulation Modeling Practice and Theory (1569-190X) Elsevier

Association member

Society Organization name Role
2023 - Current SOCIEDADE PORTUGUESA de MATERIAIS (SPM) Member
2020 - Current The European Scientific Association for material FORMing -ESAFORM Member
2014 - Current Tunisian Association of Mechanics Member

Committee member

Activity description
Role 		Institution / Organization
2019/04 - Current Founding member of ConcePioneers Club
Advisor / Consultant
 Université de Sousse, Tunisia

Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2017/09 - Current Member of the research master programme committee
Member
 Université de Sousse, Tunisia

Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2017/04 - Current Member of the scientific council
Member
 Université de Sousse, Tunisia

Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2016/05/23 - Current Member of the doctoral programme committee
Member
 Université de Sousse, Tunisia

École Nationale d'Ingénieurs de Sousse, Tunisia
2011/09 - Current Member of professional masters committee
Member
 Université de Sousse, Tunisia

Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2011 - Current Member of graduate programme committee
Member
 Université de Sousse, Tunisia

Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2011 - Current Member of the Mechanical Engineering Laboratory Council
Member
 Université de Monastir, Tunisia

École Nationale d'Ingénieurs de Monastir, Tunisia
2017 - 2019/10/31 Chairman of the Department of Mechanical Engineering
Director
 Université de Sousse, Tunisia

Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2011 - 2018 Chair of the examination board
President / Vice-president
 Université de Sousse, Tunisia

Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2009 - 2011 Pedagogical coordinator of lab works
Coordinator
 Université de Monastir, Tunisia

École Nationale d'Ingénieurs de Monastir, Tunisia

Conference scientific committee

Conference name Conference host
2024 - Current International Conference on Advances in Mechanical Engineering and Mechanics (ICAMEM2024) Sousse, Tunisia
2022 - Current Scientific and Technical Days in Mechanics and Materials (JSTMM) Hammamet, Tunisia
2021 - Current European Scientific Association for material FORming (ESAFORM'2021) Liège, Belgium
2020 - Current Congré Tunisien de Mécanique (Cotume 2020) Hammamet, Tunisia
2019 - Current Global Conference on Materials Science and Engineering Sanya, China
2019 - Current International Conference on Material Strength and Applied Mechanics Kiev Ukraine
2019 - Current Global Conference on Polymer and Composite Materials Bankok, Thailand
2019 - Current International Conference Design and Modeling of Mechanical Systems, (CMSM’2019) Hammamet, Tunisia
2018 - Current Congré Tunisien de Mécanique (COTUME 2018) Hammamet, Tunisia
2019/12/16 - 2019/12/18 International Conference on Advances in Mechanical Engineering and Mechanics Hammamet, Tunisia

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2017 - 2019 Computational Mechanics FEM for Sheet Metal Forming Numerical Simulation and plasticity (Mestrado) Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia

Université de Sousse, Tunisia
2017 - 2019 Materials Selection for Engineering Applications Materials Selection for Engineering Applications (Mestrado) Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia

Ecole Nationale d'Ingénieurs de Sousse LATIS Laboratory of Advanced Technology and Intelligent Systems, Tunisia
2017 - 2019 Introduction to Materials Engineering Introduction to Materials Engineering (Mestrado) Ecole Nationale d'Ingénieurs de Sousse LATIS Laboratory of Advanced Technology and Intelligent Systems, Tunisia
2016 - 2019 Plasticity and metal forming process Plasticity and metal forming process (Mestrado) Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2016 - 2019 Technology of metal forming processes Technology of metal forming processes (Mestrado) Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2010 - 2019 Introduction to Materials Science Introduction to Materials Science (Licenciatura) Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2007 - 2019 Modeling and Numerical Simulation Modeling and Numerical Simulation (Mestrado) Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2007 - 2019 Mechanics of rigid solids Mechanics of rigid solids (Licenciatura) Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia
2004 - 2019 Strength of Materials Undergraduate (Pós-Graduação) Institut Supérieur des Sciences Appliquées et de Technologie de Sousse, Tunisia

Université de Sousse, Tunisia

Interview (tv / radio show)

Program Topic
2018/11/30 - Current Regional News Hackaton 24 heures competiton

Journal scientific committee

Journal title (ISSN) Publisher
2023 - Current Modelling and Simulation in Engineering (1687-5605 ) Wiley
2020/11 - Current International Journal of Pressure Vessels and Piping (0308-0161) Elsevier
2020 - Current International Journal of Mechanical Sciences (0020-7403) Elsevier
2019/03 - Current Materials Research Express (2053-1591) IOP Publishing
2018/12 - Current Simulation: Transactions of the Society for Modeling and Simulation International (0037-5497) SAGE (publishing)
2018/10 - Current Advances in Mechanical Engineering (1687-8140) SAGE Publications
2016/04 - Current Materials & Design (1980-2015) (0261-3069) Elsevier
2015/09 - Current Engineering Computations (0264-4401) Emerald (MCB UP )
2015/06 - Current Journal of Testing and Evaluation (0090-3973) ASTM International
2014/11 - Current Advances in Materials (2327-2503) Science Publishing Group
2014/11 - Current International Journal of Mechanical Engineering and Applications (2330-023X) Science Publishing Group
2014/01 - Current Simulation Modeling Practice and Theory (1569-190X) Elsevier

Other jury / evaluation

Activity description Institution / Organization
2018/09/20 - Current President of the jury for the recruitement of contract teachers in Mechanical Engineering at University of Sousse, Tunisia Université de Sousse, Tunisia
Distinctions

Award

2024 Outstanding Reviewer Awards 2023
IOP Publishing Ltd, United Kingdom
2023 IOP Trusted Reviewer status
IOP Publishing Ltd, United Kingdom