???global.info.a_carregar???
Paulo Nobre Balbis Reis. Concluiu o(a) Doutoramento em Engenharia Mecânica em 2003/07/18 pelo(a) Universidade da Beira Interior, Mestrado em Mestrado em Ciências de Engenharia em 1996/01/10 pelo(a) Universidade de Coimbra Faculdade de Ciências e Tecnologia e Licenciatura em Engenharia Mecânica em 1992/09/07 pelo(a) Universidade de Coimbra Faculdade de Ciências e Tecnologia. Actualmente é Professor Associado no Departamento de Engenharia Mecânica da Faculdade de Ciências e Tecnologia da Universidade de Coimbra.
Identification

Personal identification

Full name
Paulo Nobre Balbis Reis

Citation names

  • Reis, Paulo
  • Reis, P.
  • Reis, Paulo N.B.
  • Balbis Reis, Paulo Nobre
  • Reis, P.N.B.
  • Reis, P.N.
  • dos Reis, Paulo Nobre Balbis

Author identifiers

Ciência ID
8F11-2B9F-EB68
ORCID iD
0000-0001-5203-3670

Telephones

Telephone
  • 239790763 (Professional)

Knowledge fields

  • Engineering and Technology - Mechanical Engineering - Mechanical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
English Advanced (C1) Advanced (C1) Upper intermediate (B2) Advanced (C1)
French Beginner (A1) Beginner (A1) Beginner (A1) Beginner (A1)
Spanish; Castilian Beginner (A1) Beginner (A1) Beginner (A1)
Education
Degree Classification
2003/07/18
Concluded
 Engenharia Mecânica (Doutoramento)
Major in Construções Mecânicas
Universidade da Beira Interior, Portugal
"Resistência de Uniões Estruturais em Polipropileno Reforçado com Fibra de Vidro" (THESIS/DISSERTATION)
 Aprovado
1996/01/10
Concluded
 Mestrado em Engenharia Mecânica (Mestrado)
Major in Ciências de Engenharia
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"Fadiga e Fluência do Titânio grade 2" (THESIS/DISSERTATION)
 Muito Bom
1992/09/07
Concluded
 Engenharia Mecânica (Licenciatura)
Major in Produção
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"Influência da Geometria do Cordão na Iniciação de Fendas de Fadiga de Juntas de Topo" (THESIS/DISSERTATION)
 BOM
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2021/02/07 - Current Associate Professor (University Teacher) Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2003/07/19 - 2021/02/07 Assistant Professor (University Teacher) Universidade da Beira Interior, Portugal
1996/01/11 - 2003/07/18 Assistant (University Teacher) Universidade da Beira Interior, Portugal
1994/12/12 - 1996/01/10 Trainee Assistant (University Teacher) Universidade da Beira Interior, Portugal
Projects

Grant

Designation Funders
1992/09/01 - 1994/07/31 Fadiga e Fluência do Titânio grade 2
JNICT I&D
Master Student Fellow
Universidade de Coimbra Departamento de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded

Contract

Designation Funders
2019 - 2023 Reliable Roadmap for Certification of Bonded Primary Structures (CERTBOND)
COST CA18120
Researcher
European Cooperation in Science and Technology
Ongoing
2018 - 2021 Components for unmanned aerial vehicles (UAVs) produced by additive manufacturing
POCI-01-0145-FEDER-031296
Principal investigator
Agência Nacional de Inovação SA
Ongoing
2018 - 2020 Estudio del comportamiento frente a impacto y post-impacto de palas de aerogenerador fabricadas de estructuras sándwich
DPI2017-86324-R; Ministerio de Economia, Industria y Competitividad de España
Researcher
Gobierno de España
Ongoing
2017 - 2020 EMaDeS - Energy, Materials and Sustainable Development, Research Line 2, tarefa RL2.1 - Comportamento mecânico de compósitos nano-reforçados
Centro-01-0145-FEDER-000017
Principal investigator
Agência Nacional de Inovação SA
Ongoing
2016 - 2017 L-AMPV
EDA/MDN
Researcher
European Defence Agency
Concluded
2016 - 2016 SMW System
Vale I&DT nº 6166
Principal investigator
Agência Nacional de Inovação SA
Concluded
2010 - 2012 Otimização das Propriedades Mecânicas de Compósitos Reforçados com Nanoclays Especialmente Modificados
PTDC/EME-PME/103622/ 2008
Researcher
Fundação para a Ciência e a Tecnologia
Concluded
2010 - 2012 Nano-enhanced Explosion Resistant Composite Transport Security Containers
CBP.MD.CLG.983977
Principal investigator
NATO
Concluded
2006 - 2008 Fatigue Behavior of Epoxy/Carbon Fiber Laminate Composites Under Block Loading
PRT-AVT-01
Principal investigator
NATO
Concluded
1997 - 1999 Static and Fatigue Behaviour of Bonded Structural Joints of Polypropylene-Glass Fibre Laminate Composites
Projeto P.128 financiado pelo RTO-NATO
Researcher
NATO
Concluded
Outputs

Publications

Book chapter
  1. Siva, Patrícia A.A.; Matias, João C.O.; Azevedo, Susana G.; Reis, P.N.B.. "Eco-innovation on Manufacturing Industry: The Role of Sustainability on Innovation Processes". In Eco-innovation and the Development of Business Models, 99-116. Londres, United Kingdom: Springer, 2014.
    Published
  2. Reis, P.N.B.; Ferreira, J.A.M.; Costa, J.D.M.; Richardson, M.O.W.. "Fatigue Damage in a Glass Fibre Reinforced Polypropylene Composite". In Experimental Techniques and Design in Composite Materials 4, 9-14. Lisse, Netherlands: Swets & Zeitlinger Publishers, 2002.
    Published
  3. Reis, P.N.B.; Ferreira, J.A.M.; Costa, J.D.M.; Richardson, M.O.W.. "Fatigue of Thermoplastic Composites Adhesive Lap Joints". In Advances in Mechanical Behaviour, Plasticity and Damage, 237-242. Kidlington, Oxford, United Kingdom: Elsevier, 2000.
    Published
Conference abstract
  1. A. Mhamdi; Z. Driss; N. Belghar; Reis, P.N.B.; A. Bezazi; B. Guerira; H. Kchaou. "Material effect on the heat gain of a building air conditioning duct". Paper presented in International Conference on Mechanics and Energy - ICME'2021, Sousse, 2021.
    Published
  2. A. Mhamdi; Z. Driss; N. Belghar; Reis, P.N.B.; A. Bezazi; B. Guerira; H. Kchaou. "Study the meshing effect in the computational fluid mechanics". Paper presented in 6th International Conference on Mechanics and Energy - ICME'2021, Sousse, 2021.
    Published
  3. S. Ifa; W. Nasri; S. Frikha; Reis, P.N.B.; Z. Driss; A. Bezazi. "Building thermal insulation using flax fiber and core cork additives". Paper presented in 6th International Conference on Mechanics and Energy - ICME'2021, Sousse, 2021.
    Published
  4. S. Ifa; W. Nasri; S. Frikha; Reis, P.N.B.; Z. Driss; A. Bezazi. "Manufacturing bio composites by flax fiber for building thermal insulation". Paper presented in 6th International Conference on Mechanics and Energy - ICME'2021, Sousse, 2021.
    Published
  5. S. Valvez; A.P. Silva; Reis, P.N.B.. "Compressive properties of additively manufactured PETG composites reinforced with different fibres". Paper presented in 11th EASN Virtual International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens, Virtual event, 2021.
    Published
  6. Reis, P.N.B.; S. Valvez; J.A.M. Ferreira. "Creep and stress relaxation behaviour of 3D printed nanocomposites". Paper presented in 4th International Conference on Structural Integrity - ICSI2021, Virtual event, 2021.
    Published
  7. M.P. Silva; P. Santos; J.M. Parente; S. Valvez; Reis, P.N.B.. "Effect of different hostile solutions on mechanical properties of composite materials". Paper presented in 4th International Conference on Structural Integrity - ICSI2021, Virtual event, 2021.
    Published
  8. P. Santos; N. Bouhemame; Reis, P.N.B.; A. Bezazi. "Impact characterization of bio-based sandwich panels with cork core". Paper presented in 4th International Conference on Structural Integrity - ICSI2021, Virtual event, 2021.
    Published
  9. J.M. Parente; R. Simões; Reis, P.N.B.. "Effect of graphene nanoparticles on suspension viscosity and mechanical properties of epoxy-based nanocomposites". Paper presented in 4th International Conference on Structural Integrity - ICSI2021, Virtual event, 2021.
    Published
  10. S. Valvez; Abílio P. Silva; Reis, P.N.B.; F. Berto. "Annealing effect on mechanical properties of 3D printed composites". Paper presented in 4th International Conference on Structural Integrity - ICSI2021, Virtual event, 2021.
    Published
  11. Amaro, A.M.; R. Branco; M.A. Neto; Reis, P.N.B.. "Effect of pre-loads on the fatigue life of composites with open holes immersed in seawater". Paper presented in 7th International Conference on Mechanics of Composites - MECHCOMP7, Porto, 2021.
    Published
  12. M. Saleh; I.A. Elsayed; F. Ferreira; Reis, P.N.B.; S. Teixeira de Freitas. "Adhesively bonded composite patch repairs: Influence of patch dimensions on the flexural performance". Paper presented in 6th International Conferenceon Structural Adhesive Bonding - AB2021, Porto, 2021.
    Published
  13. A. Atoui; A. Bezazi; H. Boumediri; S. Guenfoud; Reis, P.N.B.; F. Scarpac. "Effect of treatment with an alkaline or eco-friendly of the leaves of Ampelodesmos mauritanicus on the thermal and chemical behavior". Paper presented in 9èmes Journées de Chimie, Algiers, 2021.
    Published
  14. P. Santos; A. Maceiras; Reis, P.N.B.. "Influence of manufacturing parameters on the mechanical properties of nano-reinforced CFRP by carbon nanofibers". Paper presented in 3rd InternationalConference on Trends in Material Science and Inventive Materials (ICTMIM 2021), Coimbatore, 2021.
    Published
  15. L. Leite; T.M. Lima; Reis, P.N.B.; A.M. Pereira. "The waste flow challenge of wind turbine rotor blades at the end of their life cycle". Paper presented in International Conference on Quality, Innovation and Sustainability (ICQIS2020), Leiria, 2020.
    Published
  16. M. Pereira; L. Fonseca; Reis, P.N.B.; N. Alves. "The Optimization of Fused Deposition Modelling process for PLA using Design of Experiments". Paper presented in International Conference on Quality, Innovation and Sustainability (ICQIS2020), Leiria, 2020.
    Published
  17. S. Valvez; Reis, P.N.B.. "4D Printing versus industry 4.0". Paper presented in International Conference on Quality, Innovation and Sustainability (ICQIS2020), Leiria, 2020.
    Published
  18. J. Parente; Reis, P.N.B.. "Graphene and the fourth industrial revolution". Paper presented in International Conference on Quality, Innovation and Sustainability (ICQIS2020), Leiria, 2020.
    Published
  19. S. Valvez; A.M. Pereira; Reis, P.N.B.. "3D Printing of biodegradable materials". Paper presented in International Conference on Quality, Innovation and Sustainability (ICQIS2020), Leiria, 2020.
    Published
  20. S. Valvez; P. Santos; M.P. Silva; Reis, P.N.B.. "4D Printing of shape memory polymers: An overview". Paper presented in Webinar on 3D Printing & Additive Manufacturing, Virtual event, 2020.
    Published
  21. P. Santos; S. Valvez; Reis, P.N.B.. "Mechanical characterization of different epoxy resins enhanced with carbon nanofibers". Paper presented in 1st Virtual Euroepan Conference on Fracture - VECF1, Virtual event, 2020.
    Published
  22. P. Santos; S. Valvez; A. Monjon; Reis, P.N.B.. "The effect of fibre hybridisation on the viscoelastic properties of polymeric composites". Paper presented in 1st Virtual Euroepan Conference on Fracture - VECF1, Virtual event, 2020.
    Published
  23. M.P. Silva; P. Santos; J.P. Parente; S. Valvez; Reis, P.N.B.. "Hybridization effect on the impact properties of flax composites". Paper presented in 1st Virtual Euroepan Conference on Fracture - VECF1, Virtual event, 2020.
    Published
  24. J.P. Parente; P. Santos; S. Valvez; M.P. Silva; Reis, P.N.B.. "Fatigue behaviour of graphene composites: An overview". Paper presented in 1st Virtual Euroepan Conference on Fracture - VECF1, Virtual event, 2020.
    Published
  25. P. Santos; J.P. Parente; S. Valvez; M.P. Silva; Reis, P.N.B.. "Hybridization effect on the bending properties of flax composites". Paper presented in 1st Virtual Euroepan Conference on Fracture - VECF1, Virtual event, 2020.
    Published
  26. S. Valvez; P. Santos; J.P. Parente; M.P. Silva; Reis, P.N.B.. "3D printed continuous carbon fiber reinforced PLA composites: A short review". Paper presented in 1st Virtual Euroepan Conference on Fracture - VECF1, Virtual event, 2020.
    Published
  27. Silva, M.P.; Santos, P.; Parente, J.M.; Reis, P.N.B.. "Hybridization and Water Ageing Effect on Viscoelastic Behaviour of Flax Fibre Green Composite". Paper presented in 23rd International Conference on Advanced Materials and Simulation, Barcelona, 2019.
    Published
  28. Reis, P.N.B.; Pereira, A.M.; Sousa, N.N.; Alves, N.; Ferreira, J.A.M.. "Stress-Relaxation Behaviour of 3D-printed polylactide (PLA)". Paper presented in 1st European Conference on Structural Integrity of Additively Manufactured Materials (ESIAM19), Trondheim, 2019.
    Published
  29. Serra, G.C.G.; Sousa, N.N.; Reis, P.N.B.; Ferreira, J.A.M.. "Effect of Curing Temperature on the Mechanical Properties of Aluminium Single Lap Bonded Joints". Paper presented in 5th International Conference on Structural Adhesive Bonding (AB2019), Porto, 2019.
    Published
  30. Amaro, A.M.; Neto, M.A.; Reis, P.N.B.. "Mechanical Characterization of Different Types of Aluminium Foams at High Strain Rates". Paper presented in 5th International Conference on Mechanics of Composites (MECHCOMP 2019), Lisboa, 2019.
    Published
  31. Silva, M.P.; Santos, P.; Reis, P.N.B.. "Stress Relaxation and Creep Behaviour of Composite Laminates with Resin Filled by Cork Powder". Paper presented in 5th International Conference on Mechanics of Composites (MECHCOMP 2019), 2019.
    Published
  32. Reis, P.N.B.; Santos, P.; Silva, M.P.; Ferreira, J.A.M.. "Stress Relaxation in Composites Subjected to Low Velocity Impact Loads". Paper presented in 5th International Conference on Mechanics of Composites, (MECHCOMP 2019), Lisboa, 2019.
    Published
  33. Santos, P.; Silva, M.P.; Reis, P.N.B.; Ferreira, J.A.M.. "Mechanical Properties of Carbon Nanofiber Reinforced Polymer Composites". Paper presented in 5th International Conference on Mechanics of Composites (MECHCOMP 2019), Lisboa, 2019.
    Published
  34. Santos, P.; Silva, M.P.; Sousa, N.N.; Reis, P.N.B.. "Mechanical Characterization of a Sandwich Composite with Cork Core". Paper presented in XIX Congress of Sociedade Portuguesa de Materiais and X International Symposium on Materials, Lisboa, 2019.
    Published
  35. Amaro, A.M.; Neto, M.A.; Loureiro, A.J.R.; Silva, M.P.; Reis, P.N.B.. "Repair Delaminations in Carbon/epoxy Laminates". Paper presented in International Conference on Materials Science and Manufacturing Engineering (MSME 2018), Paris, 2018.
    Published
  36. Reis, P.N.B.; Serra, G.C.G.; Silva, M.P.; Santos, P.. "Multi-impact Response of Composite Sandwiches Incorporating Cork Cores". Paper presented in 1st World Conference on Advanced Materials for Defense (AuxDefense 2018), Lisboa, 2018.
    Published
  37. Reis, P.N.B.; Gorbatikh, L.; Ivens, J.; Lomov, S.V.. "Viscoelastic behaviour of Self-reinforced Polypropylene Composites under Bending Loads". Paper presented in 22nd European Conference on Fracture (ECF 22), Belgrade, 2018.
    Published
  38. Kamocka, M.; Amaro, A.M.; Reis, P.N.B.; Neto, M.A.; Cirne, J.M.O.S.. "Effect of Hostile Solutions on the Viscoelastic behavior of Carbon/epoxy Laminates". Paper presented in 6th International Conference Integrity-Reliability-Failure (IRF2018,), Lisboa, 2018.
    Published
  39. Reis, P.N.B.; Silva, M.P.; Santos, P.. "Viscoelastic behavior of Hybrid Laminates with Nano-enhanced Resin". Paper presented in 26th International Conference on Composites or Nano Engineering (ICCE 26) Millennium Hotel Paris Charles de Gaulle, Paris, 2018.
    Published
  40. Amaro, A.M.; Reis, P.N.R.; Neto, M.A.. "Effect of Angle-ply on the Viscoelastic behaviour of GFRP Laminates Subjected to Hostile Environments". Paper presented in 4th International Conference on Mechanics of Composites, Universidad Carlos III de Madrid, Madrid, 2018.
    Published
  41. Santos, P.; Silva, M.P.; Reis, P.N.B.. "Strain-Rate Sensitivity of Composites with Filled Epoxy Matrix". Paper presented in 16th Portuguese Conference on Fracture, Covilhã, 2018.
    Published
  42. Amaro, A.M.; Neto, M.A.; Reis, P.N.B.; Loureiro, A.J.R.. "Effect of Friction Stir Spot Welding on the Mechanical Strength of Weld-Bonded Joints". Paper presented in 16th Portuguese Conference on Fracture, Covillhã, 2018.
    Published
  43. Pereira, A.M.; Ferreira, J.A.M.; Alves, M.L.; Matias, J.M.; Reis, P.N.B.. "Fatigue Life Effect on Stress Relaxation Behaviour of Single-lap Adhesive Joints". Paper presented in 16th Portuguese Conference on Fracture, Covilhã, 2018.
    Published
  44. Silva, M. P.; Santos, P.; Reis, P.N.B.. "Stress Relaxation of Composites with Filled Epoxy Matrix". Paper presented in 16th Portuguese Conference on Fracture, Covilhã, 2018.
    Published
  45. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.; Loureiro, A.J.R.. "Repair Delaminations in Composite Laminates by Screws". Paper presented in 3rd International Conference on Mechanics of Composites, University of Bologna, Bologna-Itália, 4 a 7 de julho de 2017, Bologna, 2017.
    Published
  46. Reis, P.N.B.; Amaro, A.M.; Ferreira, J.A.M.; Cirne, J.S.. "Effect of Hostile Solutions on Composite Laminates Subjected to Impact Loads”,". Paper presented in 8th International Conference on Composites Testing and Model Identification (CompTest 2017), Leuven, 2017.
    Published
  47. Santos, R.A.M.; Reis, P.N.B.; Santos, M.J.; Coelho, C.A.C.P.. "Impact Strength of Carbon/Epoxy Laminates with Holes". Paper presented in V Encontro Nacional de Estudantes de Materiais, Covilhã, 2016.
    Published
  48. Graça, H.; Gamboa, P.; Talaia, P.; Fael, P.; Reis, P.N.B.. "Armour Solutions Incorporating Cork". Paper presented in V Encontro Nacional de Estudantes de Materiais, Covilhã, 2016.
    Published
  49. Amaro, A.M.; Pinto, M.I.M.; Lopes, S.; Reis, P.N.B.; Cirne, J.M.O.S.. "Effect of Cementitious Solutions on the Mechanical Performance of GFRP Composites". Paper presented in 5th International Conference on Integrity-Reliability-Failure (IRF2016), Porto, 2016.
    Published
  50. Reis, P.N.B.; Pereira, A.M.; Ferreira, J.A.M.; Costa, J.D.M.. "Low-Cycle Fatigue of Single Lap Joints Involving Steel/Epoxy Systems". Paper presented in 15th Portuguese Conference on Fracture, Lisboa, 2016.
    Published
  51. Dias, B.S.M.; Amaro, A.M; Cirne, J.S.; Reis, P.N.B.; Neto, M.A.. "Mechanical Response of Composite Laminates at High Strain Rates: Effect of Hostile Solutions". Paper presented in 18th International Conference on Composite Structures (ICCS 18), Lisboa, 2015.
    Published
  52. Farto, E.M.; Amaro, A.M.; Santos, M.; Santos, J.B.; Reis, P.N.B.. "Effect of Electrical Discharges on the Structural Integrity of Composite Laminates". Paper presented in 18th International Conference on Composite Structures (ICCS 18), Lisboa, 2015.
    Published
  53. Reis, P.N.B.; Silva, A.M.P.; Castro-Gomes, J.. "Composites Manufactured with Green Epoxy Resin and Tungsten Mine Wastes". Paper presented in International Conference on Advanceds in Composite Materials and Structures, (CACMS 2015), Istanbul, 2015.
    Published
  54. Costa, J.J.; Amaro, A.M.; Loureiro, A.J.R.; Reis, P.N.B.. "Effect of the Erosive Wear promoted by Dusts on the Impact Strength of Composite laminates". Paper presented in International Conference on Advanceds in Composite Materials and Structures (CACMS 2015), Istanbu, 2015.
    Published
  55. Reis, P.N.B.; Ferreira, J.A.M.; Mortas, N.; Richardson, M.O.W.. "Effect of the Core’s Discontinuity on the Impact Strength of Composite Sandwiches". Paper presented in International Conference on Advanceds in Composite Materials and Structures, (CACMS 2015), Istanbul, 2015.
    Published
  56. Reis, P.N.B.; Soares, J.R.L.; Pereira, A.M.; Ferreira, J.A.M.. "Hygrothermal Effects on Transverse Impact Response of Single-Lap Joints". Paper presented in 2ª Conferência Luso-Brasileira de Adesão e Adesivos (CLBA), Porto, 2014.
    Published
  57. Marques, I.F.C.; Amaro, A.M.; Loureiro, A.J.R.; Reis, P.N.B.; Magalhães, A.G.. "Influence of Taper’s Angle in Single-Lap Bonded Joints". Paper presented in 2ª Conferência Luso-Brasileira de Adesão e Adesivos (CLBA), Porto, 2014.
    Published
  58. Pereira, A.M.; Reis, P.N.B.; Ferreira, J.A.M.. "Effect of the Stress Ratio on the Fatigue Behaviour of Single-Lap Joints". Paper presented in 2ª Conferência Luso-Brasileira de Adesão e Adesivos, (CLBA 2014), Porto, 2014.
    Published
  59. Melo, M.A.A.; Santos, M.; Amaro, A.M.; Santos, J.B.; Reis, P.N.B.. "Water-immersion versus Air-coupled Ultrasonic C-Scan Systems to Characterize Damages in Composite Laminates". Paper presented in 1st International Conference on Mechanics of Composites, Stony Brook University, Long Island-New York-USA, 2014.
    Published
  60. Nogueira, T.F.C.S.; Amaro, A.M.; Reis, P.N.B.; Louro, C.; Neto, M.A.. "Composite Laminates Aged by Oil Solutions: Impact Strength". Paper presented in 1st International Conference on Mechanics of Composites, Long Island-New, 2014.
    Published
  61. Reis, R.A.S.; Louro, C.; Amaro, A.M.; Reis, P.N.B.; Neto, M.A.. "Composite Laminates Aged by Oil Solutions: Flexural Properties". Paper presented in 1st International Conference on Mechanics of Composites, Long Island-New York, 2014.
    Published
  62. Silva, A.P.; Reis, P.N.B; Blaszczak, U.; Kochanowicz, M.; Zmojda, J.; Dorosz, D.. "Use of the Simple Optical Fibers to Monitor the Deformation in CFRP Laminates". Paper presented in 15th Conference on Optical Fibers and Their Applications, Bialystok-Lipowy Most, 2014.
    Published
  63. Reis, P.N.B.; Silva, A.P.; Miluski, P.; Dorosz, D.. "Effect of Corrosive Solutions on CFRP Laminates Evaluated by Optical Fibers". Paper presented in 15th Conference on Optical Fibers and Their Applications, Bialystok-Lipowy Most, 2014.
    Published
  64. Mortas, N.; Er, O.; Reis, P.N.B.; Ferreira, J.A.M.. "Impact Response of Composite Materials Subject to Hostile Environments". Paper presented in 17th International Conference on Composite Structures (ICCS 17), Porto, 2013.
    Published
  65. Santos, P.; Campos, A.; Reis, P.N.B; Ferreira, J.A.M.. "Effect of the Fibre on Impact Strength of Composite Materials". Paper presented in 17th International Conference on Composite Structures (ICCS 17), Porto, 2013.
    Published
  66. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.; Neto, M.A.. "Influence of Open Holes on Composites Subjectedto Low Velocity Impacts". Paper presented in 17th International Conference on Composite Structures (ICCS 17), Porto, 2013.
    Published
  67. Zolkiewski, S.J.; Reis, P.N.B.. "Mechanical Properties of Fibre-Metal Laminates". Paper presented in 17th International Conference on Composite Structures, ICCS 17, Porto, 17 a 21 de junho de 2013, Porto, 2013.
    Published
  68. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.. "Effects of Hostiles Solutions on Glass/epoxy Composites". Paper presented in 17th International Conference on Composite Structures (ICCS 17), Porto, 2013.
    Published
  69. Reis, P.N.B.; Campos, A.; Santos, P.; Ferreira, J.A.M.. "The Effect of Hostile Environments in Composite Materials". Paper presented in 17th International Conference on Composite Structures (ICCS 17), Porto, 2013.
    Published
  70. Pereira, A.M.; Reis, P.N.B.; Ferreira, J.A.M.. "Effect of Saline Environment on Mechanical Properties of Adhesive Joints". Paper presented in Conferência Luso-Brasileira de Adesão e Adesivos (CLBA), Rio de Janeiro, 2012.
    Published
  71. Santos, P.; Reis, P.N.B.; Ferreira, J.A.M.; Richardson, M.O.W.. "Impact Response of Sandwich Composites with Cores of Balsa Wood and Skins of Glass Fiber with Nano-enhanced Resin". Paper presented in 10th International Conference on Sandwich Structures, Nantes, 2012.
    Published
  72. Silva, A.P.; Santos, P.; Reis, P.N.B.. "The Effect of Damages on Impact Strength of High Strength Steels". Paper presented in IV International Conference on Transport Problems, Faculty of Transport Katowice, 27 a 29 de junho de, Katowice, 2012.
    Published
  73. Reis, P.N.B.; Santos, P.; Silva, A.P.. "The Hygrothermal Effect on Mechanical Behaviour of Adhesive Joints". Paper presented in IV International Conference on Transport Problems, Faculty of Transport, Katowice, 2012.
    Published
  74. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.. "Repeated Impact Characterization of Glass/epoxy Composite Laminates". Paper presented in International Conference on Mechanics of Nano, Micro and Macro Composite Structures, Torino-Itália, 18 a 20 de junho de 2012, Torino, 2012.
    Published
  75. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.; de Moura, M.F.S.F.. "Repeated Impact on Glass Fiber/Epoxy Laminates Damaged". Paper presented in International Conference on Mechanics of Nano, Micro and Macro Composite Structures 18 a 20 de junho de 2012, Torino, 2012.
    Published
  76. Ferreira, J.A.M.; Pereira, A.M.S.; Reis, P.N.B.; Costa, J.D.M.. "Analysis of the Mechanical Properties of Nanofilled Epoxy Composites". Paper presented in XVII International Conference on Mechanics of Composite Materials, Riga, 2012.
    Published
  77. Reis, P.N.B.; Silva, A.P.; Santos, P.; Ferreira, J.A.M.. "Hygrothermal Effect on the Impact Response of Carbon Composites with an Epoxy Resin Enhanced by Nanoclays". Paper presented in XVII International Conference on Mechanics of Composite Materials, Riga, 2012.
    Published
  78. Silva, P.A.A.; Matias. J.C.O.; Reis, P.N.B.. "Waste Management towards Sustainability and Competitiveness: Case Study". Paper presented in 1st International Conference on WASTES: Solutions, Treatments and Opportunities, Guimarães, 2011.
    Published
  79. Santos, P.; Reis, P.N.B.; Ferreira, J.A.M.; Richardson, M.O.W.; Richardson, B.C.H.. "Impact Response of Kevlar Composites with Filled Epoxy Matrix". Paper presented in 16th International Conference on Composite Structures (ICCS 16), Porto, 2011.
    Published
  80. Reis, P.N.B.; Ferreira, J.A.M.; Pereira, A.M.S.; Costa, J.D.M.. "Fracture Toughness and Water Uptake of Enhanced Nanofilled Epoxy Composites". Paper presented in 16th International Conference on Composite Structures (ICCS 16), Porto, 2011.
    Published
  81. Amaro, A.M.; Reis, P.N.B.; Antunes, F.; Santos, J.B.. "Mechanical Properties of Composite Laminates after Impact Loads: Determination by Resonant Techniques". Paper presented in Proc. 16th International Conference on Composite Structures (ICCS 16), Porto, 2011.
    Published
  82. Amaro, A.M.; Loureiro, A.; Reis, P.N.B.. "Compressive Residual Strength after Low Velocity Impact in Carbon-Epoxy Lamites". Paper presented in 3th International Conference on Integrity, Reliability & Fracture, 2009.
    Published
  83. Silva, P.A.A.; Reis, P.N.B.; Ferreira, J.A.M.. "Mechanical Behaviour of Polyester based Composites Filled by Cork and Ash Powders". Paper presented in 15th International Conference on Composite Structures, ICCS 15, Porto, 2009.
    Published
  84. Reis, P.N.B.; Amaro, A.M.; de Moura, M.F.S.F.; Santos, J.B.. "The Effect of Several Parameters on Low Velocity Impact Composites Behaviour". Paper presented in 15th International Conference on Composite Structures, ICCS 15, Porto, 2009.
    Published
  85. Amaro, A.M.; Reis, P.N.B.; Magalhães, A.G.; de Moura, M.F.S.F.. "The Effect of the Impactor Diameter and Boundary Conditions on Low Velocity Impact Composites Behaviour". Paper presented in 5th BSSM International Conference on Advances in Experimental Mechanics, Manchester, 2007.
    Published
  86. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.. "The Effect of the Carbon Epoxy Plate’s Geometry under Low Velocity Impact". Paper presented in IV International Materials Symposium and XIII Portuguese Materials Society Meeting, Porto, 2007.
    Published
  87. Alves, J.R.; Reis, P.N.B.; Coelho, C.A.C.P.. "Impact Strength of Composites with Multiple Holes". Paper presented in V Encontro Nacional de Estudantes de Materiais, Covilhã, 2006.
    Published
  88. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.M.S.. "Delamination Effect on Bending Behaviour in Carbon-Epoxy Composites". Paper presented in 5th International Conference on Mechanics and Materials in Design, Porto, 2006.
    Published
  89. Amaro, A.M.; de Moura, M.F.S.F.; Reis, P.N.B.. "Detection of Low Velocity Impact Damage in Carbon-Epoxy Plates Using NDT". Paper presented in 16th European Conference of Fracture, Alexandroupolis, 2006.
    Published
  90. Reis, P.N.B.; Ferreira, J.A.M.; Costa, J.D.M.. "The Stress Ratio Effect on The Fatigue Life of Carbon/Epoxy Laminate Composites". Paper presented in 10th Portuguese Conference on Fracture, Guimarães, 2006.
    Published
  91. Reis, P.N.B.; Ferreira, J.A.M.; Silva, H.; Costa, J.D.M.; Richardson, M.O.W.. "Stacking Laminate Effects on Adhsive Lap Joints Strenght". Paper presented in 11th International Conference on Fracture(ICF XI), Turin, 2005.
    Published
  92. Reis, P.N.B.; Ferreira, J. A. M.; Antunes, F. V.; Costa, J. D. M.. "Fatigue Behaviour of Natural Fibber Core Sandwich Laminates Subjected to Bending Loading". Paper presented in 11th European Conference on Compoite Materials, ECCM 11, Rhodes, 2004.
    Published
  93. Reis, P.N.B.; Ferreira, J. A. M.; Costa, J. D.; Richardson, M. O. W.. "Creep Behaviour of PP/Glass-Fibre Composite Adhesive Lap Joints". Paper presented in I International Materials Symposium, Coimbra, 2001.
    Published
Conference paper
  1. Paulo N. B. Reis; Carlos A. C. P. Coelho; Luis M. Ferreira. "Cylindrical Sandwich Shells for Civil Engineering Applications". 2023.
    10.3390/IOCBD2023-15196
  2. Luis M. Ferreira; Carlos A. C. P. Coelho; Paulo N. B. Reis. "Impact Response of FRP Composites Used in Civil Structural Applications". 2023.
    10.3390/IOCBD2023-15215
  3. Berto, F.; Iacoviello, F.; Kourkoulis, S.; Moreira, P.; Reis, P.N.B.; Sedmak, A.; Susmel, L.; Tavares, P.. "Preface". 2020.
    10.1016/j.prostr.2020.04.001
  4. Santos, M.J.; Santos, J.B.; Reis, P.; Amaro, A.. "Ultrasonic C-scan techniques for damage evaluation of Carbon Fiber Reinforced Polymers submitted to low energy impacts". 2019.
    10.1121/2.0001062
  5. Jaiswal, P.R.; Hirulkar, N.S.; Reis, P.N.B.; Papadakis, L.; Khan, S.N.. "Effect of cyclic solar (UV) radiation and temperature on mechanical performance of single lap adhesive joint". 2018.
    10.1109/ICICICT1.2017.8342557
  6. Hirulkar, N.S.; Jaiswal, P.R.; Papadakis, L.; Reis, P.N.B.; Ferreira, J.A.M.. "Joint strength optimization of single lap adhesive joints by surface patterning". 2018.
    10.1109/ICICICT1.2017.8342560
  7. Jaiswal, P.R.; Hirulkar, N.S.; Reis, P.N.B.; Papadakis, L.; Khan, S.N. "Effect of Cyclic Solar (UV) Radiation and Temperature on Mechanical Performance of Single Lap Adhesive Joint". Paper presented in International Conference on Intelligent Computing, Instrumentation and Control Technologies (ICICICT 2017), Kannur, 2017.
    Published
  8. Hirulkar, N.S.; Jaiswal, P.R.; Papadakis, L.; Reis, P.N.B.; Ferreira, J.A.M.. "Joint Strength Optimization of Single Lap Adhesive Joints by Surface Patterning". Paper presented in International Conference on Intelligent Computing, Instrumentation and Control Technologies (ICICICT 2017), Kannur, 2017.
    Published
  9. Serra, G.C.G.; Reis, P.N.B.; Ferreira, J.A.M.. "Fatigue Life of Single Lap Joints with Different Adhesives". Paper presented in 11th European Adhesion Conference (Euradh 2016), Glasgow, 2016.
    Published
  10. Miluski, P.; Dorosz, D.; Silva, A.P.; Reis, P.N.B.; Zmojda, J.; Kochanowicz, M.. "Carbon Laminates with RE Doped Optical Fiber Sensors". Paper presented in International Conference on Engineering-Engineering for Society (ICEUBI 2015), Covihã, 2015.
    Published
  11. Rato, J.S.; Henriques, R.; Miluski, P.; Dorosz, D.; Reis, P.N.B.; Silva, A.P.. "Evaluation of Single Optical Fiber in Temperature Analysis on FRP Composites". Paper presented in International Conference on Engineering-Engineering for Society (ICEUBI 2015), Covihã, 2015.
    Published
  12. Amaro, A.P.; Reis, P.N.B.; Neto, M.A.; Cirne, J.M.. "Effect of Damages Promoted by Bending Loads on the Impact Strength". Paper presented in 6th International Conference on Mechanics and Materials Design (M2D 2015), Ponta Delgado, 2015.
    Published
  13. Mortas, N.; Reis, P.N.B.; Ferreira, J.A.M.. "Impact Response of Balsa Core Sandwiches". Paper presented in First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues, Catania, 2014.
    Published
  14. Reis, P.N.B.; Ferreira, J.A.M.; Costa, J.D.M.; Pereira, A.M.. "Interlaminar Fracture in Woven Carbon/epoxy Laminates". Paper presented in First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues”, Catania, 2014.
    Published
  15. Reis, P.N.B.; Silva, A.P.. "Fiber Optic Sensors to Health Monitoring of CFRC Laminates". Paper presented in 14th Portuguese Conference on Fracture, Régua, 2014.
    Published
  16. Reis, P.N.B.; Monteiro, J.F.R.; Pereira, A.M.; Ferreira, J.A.M.; Costa, J.D.M.. "Fatigue behaviour of Adhesively-bonded Steel Lap Joints under Variable Frequency". Paper presented in 14th Portuguese Conference on Fracture, Régua, 2014.
    Published
  17. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.. "The Effect of Holes on the Impact Strength of Glass/Epoxy Composites". Paper presented in 13th Portuguese Conference on Fracture, Coimbra, 2012.
    Published
  18. Santos, P.; Reis, P.N.B.; Ferreira, J.A.M.; Richardson, M.. "Effect of Fillers on Impact Response of Kevlar Composites". Paper presented in 13th Portuguese Conference on Fracture, Coimbra, 2012.
    Published
  19. Reis, P.N.B.; Ferreira, J.A.M.; Costa, J.D.M.; Santos, M.J.. "Fatigue Performance of Kevlar/Epoxy Composites with Cork Filled Matrix". Paper presented in 13th Portuguese Conference on Fracture, Coimbra, 2012.
    Published
  20. Reis, P.N.B.; Ferreira, J.A.M.; Costa, J.D.M.; Richardson, M.O.W.; Richardson, B.C.H.. "Aspects of the Mechanical and Fatigue Properties of Supernanoclay Enhanced Polymer Composites". Paper presented in 1st Annual World Congress of Nano-S&T, Dalian, 2011.
    Published
  21. Silva, P.A.A.; Matias, J.C.O.; Reis, P.N.B.. "Recycling of Footwear Products during the Manufacture Process: Case Study". Paper presented in Thirteenth International on Waste Management and Landfill Symposium, Sardinia, 2011.
    Published
  22. Ferreira, J.A.M.; Costa, J.D.M.; Reis, P.N.B.; Capela, C.. "A Study on the Stiffness and Toughness of Enhanced Nanofilled Epoxy Composites". Paper presented in XXVIII Encuentro del Grupo Espanol de Fractura, Gijón, 2011.
    Published
  23. Amaro, A.M.; Reis, P.N.B.; Santos, J.B.. "Efeito do Tipo de Dano na Resistência à Compressão de Materiais Compósitos após Impacto". Paper presented in Encontro Nacional de Materiais e Estruturas Compósitas - ECMEC2010, Porto, 2010.
    Published
  24. Reis, P.N.B.; Ferreira, J.A.M.; Costa, J.D.M.; Richardson, M.O.W.; Richardson, B.C.H.. "Toughness and Fatigue Analysis of Polypropylene Nanoclayed Composites". Paper presented in 14th European Conference on Compoite Materials, (ECCM 14), Budapest, 2010.
    Published
  25. Reis, P.N.B.; Ferreira, J.A.M.; Costa, J.D.M.; Sauceda, S.S.; Richardson, M.O.W.. "Assessment of the Mechanical Properties on Nanoclayed Polymer Based Composites". Paper presented in IV Conferência Ibérica de Fractura e Integridade Estrutural, Porto, 2010.
    Published
  26. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.; Costa, J.D.M.; Capela, C.. "Analysis of the Initial Delamination Size on the Mode I Interlaminar Fracture of Carbon/Epoxy Composites". Paper presented in 17th International Conference on Composite Materials (ICCM 17), Edinburgh, 2009.
    Published
  27. Gateira, J.M.L.; Reis, P.N.B.; Ferreira, J.A.M.; Coelho, D.A.. "Influence of Superposition Length on Static Strength of Single Lap Adhesive Joints with Dissimilar Adherents". Paper presented in 11th Euro-Japanese Symposium, Porto, 2008.
    Published
  28. Rodrigues, N.F.S.; Reis, P.N.B.; Ferreira, J.A.M.; Coelho, C.. "Impact Behaviour of Adherents for Automotive Adhesive Joints". Paper presented in 11th Euro-Japanese Symposium,, Porto, 2008.
    Published
  29. Silva, P.A.A.; Reis, P.N.B.; Ferreira, J.A.M.; Coelho, D.A.. "A Study of the Strength and Toughness on Cork Powder Filled Polyester”". Paper presented in 11th Euro-Japanese Symposium, Porto, 2008.
    Published
  30. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.; Costa, J.D.M.; Capela, C.. "A Study of the Mode I and Mode II Interlaminar Fracture of Carbon/Epoxy Bi-directional Composites". Paper presented in 17th European Conference on Fracture, Brno, 2008.
    Published
  31. Reis, P.N.B.; Ferreira, J.A.M.; Capela, C.; Costa, J.D.M.. "Fatigue Life Evaluation in a Carbon/Epoxy Laminate Composite Under Variable Block Loading". Paper presented in 9th International Fatigue Congress, Atlanta, 2006.
    Published
  32. Ferreira, J.A.M.; Reis, P.N.B.; Costa, J.D.M.. "Fatigue Analysis of Natural Fibbers Core Sandwich Laminates". Paper presented in 9th Portuguese Conference on Fracture, Setubal, 2004.
    Published
  33. Reis, P.N.B.; Antunes, F.V.; Ferreira, J.A.M.. "Influência do Comprimento de Colagem na Resistência Mecânica de Juntas Sobrepostas Simples". Paper presented in VI Congresso Iberoamericano de Engenharia Mecânica, Coimbra, 2003.
    Published
  34. Reis, P.N.B.; Costa, J.D.M.; Ferreira, J.A.M.. "Comportamento Mecânico de Ligações Coladas em PP Reforçado com Fibra de Vidro". Paper presented in 7as Jornadas de Fratura, Covilhã, 2000.
    Published
  35. Reis, P.N.B.; Fael, P.; Ferreira, J.A.M.; Devezas, T.C.. "Análise de Danos por Métodos não Destrutivos em Compósitos Termoplásticos Reforçados com Fibras de Vidro". Paper presented in IV Congresso Iberoamericano de Engenharia Mecânica, Santiago, 1999.
    Published
  36. Reis, P.N.B.; Ferreira, J.A.M.; Devezas , T.C.. "Caracterização Estática e Dinâmica de um Compósito de Polipropileno Reforçado com Fibra de Vidro". Paper presented in Seminário de Engenharia Eletromecânica, Covilhã, 1999.
    Published
  37. Reis, P.N.B.; Ferreira, J.A.M.; Costa, J.D.M.. "Fadiga a Deslocamento Controlado em Compósitos Termoplásticos". Paper presented in 6as Jornadas de Fratura, Porto, 1998.
    Published
  38. Reis, P.N.B.; Costa, J.D.M.; Ferreira, J.A.M.. "Comportamento Estático de um Compósito GFR/Polipropileno". Paper presented in III Congresso Iberoamericano de Engenharia Mecânica, Havana, 1997.
    Published
  39. Costa, J.D.M.; Ferreira, J.A.M.; Reis, P.N.B.. "Caracterização à Fluência do Titânio Grade 2". Paper presented in II Congresso Iberoamericano de Engenharia Mecânica, Belo Horizonte, 1995.
    Published
  40. Costa, J.D.M.; Ferreira, J.A.M.; Reis, P.N.B.. "Comportamento à Fadiga do Titânio Grade 2". Paper presented in 5as Jornadas de Fratura, Lisboa, 1994.
    Published
Conference poster
  1. Moreira, M.; Reis, P.N.B.; Amaro, A.M.; Messias, A.; Ramos, J.C.. "Teste de Impacto de novos materiais para protetores bucais". Paper presented in XXXIX Congresso Anual da Sociedade Portuguesa de Estomatologia e Medicina Dentária, 2019.
  2. Santos, M.; Santos, J.B.; Reis, P.N.B.; Amaro, A.M.. "Application of Ultrasonic C-scan Techniques for Damage Evaluation of Carbon Fiber Reinforced Polymers Submitted to Low Energy Impacts". Paper presented in 2019 International Congress on Ultrasonics,, 2019.
  3. Pereira, A.M.; Silva, M.R.; Reis, P.N.B.; Sousa, N.N.; Alves, N.. "Mechanical Behaviour of Hybrid Polymeric Materials Produced by Direct Digital Manufacturing". Paper presented in 5th International Conference on Structural Adhesive Bonding (AB2019), 2019.
  4. Pereira, A.M.; Reis, P.N.B.; Ferreira, J.A.M.. "Influence of Superposition Length and Gap Length on Single-Strap Adhesive Joints". Paper presented in 3rd International Conference on Structural Adhesive Bonding, (AB 2015), 2015.
  5. Reis, P.N.B.; Pereira, A.M.; Ferreira, J.A.M.. "Low-cycle Fatigue of Adhesively-bonded Steel Lap Joints". Paper presented in 3rd International Conference on Structural Adhesive Bonding (AB 2015), 2015.
  6. Reis, P.N.B.; Ferreira, J.A.M.; Pereira, A.M.; Antunes, F.V.. "Influence of Superposition Length on Transverse Impact Response of Single-Lap Adhesive Joints". Paper presented in Conferência Luso-Brasileira de Adesão e Adesivos (CLBA), 2012.
  7. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.. "A progressive Damage Model Used to Characterize the Composites Behaviour Under Low Velocity Impacts". Paper presented in 3rd European Community on Computation Methods in Applied Scanabilytiiences (ECCOMAS), 2011.
  8. Ferreira, J.A.M.; Costa, J.D.M.; Reis, P.N.B.; Richardson, M.O.W.. "A Study of the Fatigue behaviour on Kevlar Composites with Nanoclay Filled Epoxy Matrix". Paper presented in Second International Conference on Multifuncional, Hybrid and Nanomaterials, 2011.
  9. Reis, P.N.B.; Ferreira, J.A.M.; Santos, P.; Richardson, B.C.H.; Richardson, M.O.W.. "Impact Response of Kevlar Composites with Nanoclay Enhanced Epoxy Matrix". Paper presented in Second International Conference on Multifuncional, Hybrid and Nanomaterials, 2011.
  10. Reis, P.N.B.; Amaro, A.M.; Magalhães, A.G.; Campilho, R.D.S.G.; de Moura, M.F.S.F.. "Optimization of the Taper Angle on Adhesive Single-Lap Joints". Paper presented in 5th International Conference on Fracture of Polymers, Composites and Adhesives, 2008.
  11. Campilho, R.D.S.G.; Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.. "Intralaminar Toughness Characterization of Unidirectional CFRP Composites". Paper presented in 5th International Conference on Fracture of Polymers, Composites and Adhesives, 2008.
  12. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.. "On the Prediction of Low Velocity Impact Damage in Carbon-Epoxy Laminates". Paper presented in 4th International Conference on Fracture of Polymers, Composites and Adhesives, 2005.
  13. Reis, P.N.B.; Antunes, F.J.; Costa, J.D.M.; Ferreira, J.A.M.. "Notch Sensibility of Thermoplastic Glass Fibers Composites Subjected to Fatigue in Three Point Bending Loadings". Paper presented in III International Materials Symposium and XII Portuguese Materials Society Meeting, 2005.
  14. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.. "Residual Strength after Low Velocity Impact in Carbon-Epoxy Laminates". Paper presented in III International Materials Symposium and XII Portuguese Materials Society Meeting, 2005.
Journal article
  1. Wiem Nasri; Zied Driss; Ridha Djebali; Kyu-Yeon Lee; Hyung-Ho Park; Abderazak Bezazi; Paulo N. B. Reis. "Thermal Study of Carbon-Fiber-Reinforced Polymer Composites Using Multiscale Modeling". Materials (2023): https://doi.org/10.3390/ma16227233.
    10.3390/ma16227233
  2. Ferreira, L.M.; Coelho, C.A.C.P.; Reis, P.N.B.. "Numerical predictions of intralaminar and interlaminar damage in thin composite shells subjected to impact loads". Thin-Walled Structures 192 (2023): 111148. http://dx.doi.org/10.1016/j.tws.2023.111148.
    Published • 10.1016/j.tws.2023.111148
  3. Ferreira, Luis M.; Coelho, Carlos A. C. P.; Reis, Paulo N. B.. "Impact response of FRP composites used in civil structural applications". Engineering Proceedings 52 32 (2023): https://doi.org/10.3390/IOCBD2023-15215.
    Open access • Published • 10.3390/iocbd2023-15215
  4. Reis, Paulo N. B.; Coelho, Carlos A. C. P.; Ferreira, Luis M.. "Cylindrical sandwich shells for civil engineering applications". Engineering Proceedings 53 14 (2023): https://doi.org/10.3390/IOCBD2023-15196.
    Published • 10.3390/iocbd2023-15196
  5. Serra, Georgino C. G.; Ferreira, José A. M.; Reis, Paulo N. B.. "Static and Fatigue Characterization of Adhesive T-Joints Involving Different Adherends". Processes 11 9 (2023): 2640. http://dx.doi.org/10.3390/pr11092640.
    Open access • Published • 10.3390/pr11092640
  6. Vidinha, H.; Branco, R.; Amaro, A.M.; Neto, M.A.; Reis, P.N.B.; Costa, J.D.M.. "Monotonic and fatigue behaviour of notched glass fibre-reinforced polymer laminates immersed in seawater". Theoretical and Applied Fracture Mechanics 126 (2023): 103977. http://dx.doi.org/10.1016/j.tafmec.2023.103977.
    Published • 10.1016/j.tafmec.2023.103977
  7. Akhzeroun, Abdelhafid; Semcha, Abdelaziz; Bezazi, Abderrezak; Boumediri, Haithem; Reis, Paulo N.B.; Scarpa, Fabrizio. "Development and characterization of a new sustainable composite reinforced with date palm stems for rehabilitation and reconstruction of earthen built heritage". Composite Structures 316 (2023): 117015. http://dx.doi.org/10.1016/j.compstruct.2023.117015.
    Published • 10.1016/j.compstruct.2023.117015
  8. Santos, Paulo; Silva, Abílio P.; Reis, Paulo N. B.. "Effect of Carbon Nanofibers on the Strain Rate and Interlaminar Shear Strength of Carbon/Epoxy Composites". Materials 16 12 (2023): 4332. http://dx.doi.org/10.3390/ma16124332.
    Open access • Published • 10.3390/ma16124332
  9. Ferreira, Luis M.; Coelho, Carlos A. C. P.; Reis, Paulo N. B.. "Effect of Cohesive Properties on Low-Velocity Impact Simulations of Woven Composite Shells". Applied Sciences 13 12 (2023): 6948. http://dx.doi.org/10.3390/app13126948.
    Open access • Published • 10.3390/app13126948
  10. Ferreira, Luis M.; Coelho, Carlos A. C. P.; Reis, Paulo N. B.. "Numerical Simulations of the Low-Velocity Impact Response of Semicylindrical Woven Composite Shells". Materials 16 9 (2023): 3442. http://dx.doi.org/10.3390/ma16093442.
    Open access • Published • 10.3390/ma16093442
  11. Reis, P.N.B.; Sousa, P.; Ferreira, L.M.; Coelho, C.A.C.P.. "Multi-impact response of semicylindrical composite laminated shells with different thicknesses". Composite Structures 310 (2023): 116771. http://dx.doi.org/10.1016/j.compstruct.2023.116771.
    Published • 10.1016/j.compstruct.2023.116771
  12. Valvez, Sara; Reis, Paulo N.B.; Ferreira, José A.M.. "Effect of annealing treatment on mechanical properties of 3D-Printed composites". Journal of Materials Research and Technology 23 (2023): 2101-2115. http://dx.doi.org/10.1016/j.jmrt.2023.01.097.
    Open access • Published • 10.1016/j.jmrt.2023.01.097
  13. Santos, Paulo; Silva, Abílio P.; Reis, Paulo N. B.. "Effect of Carbon Nanofibers on the Viscoelastic Response of Epoxy Resins". Polymers 15 4 (2023): 821. http://dx.doi.org/10.3390/polym15040821.
    Open access • Published • 10.3390/polym15040821
  14. Katunin, Andrzej; Wachla, Dominik; Santos, Paulo; Reis, Paulo N.B.. "Fatigue life assessment of hybrid bio-composites based on self-heating temperature". Composite Structures 304 (2023): 116456. http://dx.doi.org/10.1016/j.compstruct.2022.116456.
    Published • 10.1016/j.compstruct.2022.116456
  15. Vidinha, H.; Branco, R.; Neto, M.A.; Amaro, A.M.; Reis, P.N.B.; Costa, J.D.. "Failure mechanisms of GRFP after long term exposure to seawater". Procedia Structural Integrity 48 (2023): 135-141. http://dx.doi.org/10.1016/j.prostr.2023.07.139.
    Open access • Published • 10.1016/j.prostr.2023.07.139
  16. Vidinha, Hugo; Branco, Ricardo; Neto, Maria Augusta; Amaro, Ana M.; Reis, Paulo. "Numerical modelling of progressive failure in fiber-reinforced polymer composites under quasi-static loading". Procedia Structural Integrity 51 (2023): 9-16. http://dx.doi.org/10.1016/j.prostr.2023.10.060.
    Open access • Published • 10.1016/j.prostr.2023.10.060
  17. Paulo N. B. Reis; Sara R. M. Coelho; Abderrezak Bezazi. "Effect of Impact Position on Repaired Composite Laminates Subjected to Multi-Impacts". Materials (2022): https://doi.org/10.3390/ma15228039.
    10.3390/ma15228039
  18. Serra, G.C.G.; Reis, P.N.B.; Ferreira, J.A.M.. "Effect of cure temperature on the mechanical properties of epoxy-aluminium single lap joints". The Journal of Adhesion 99 9 (2022): 1441-1455. http://dx.doi.org/10.1080/00218464.2022.2138358.
    Published • 10.1080/00218464.2022.2138358
  19. Vidinha, Hugo; Branco, Ricardo; Neto, Maria Augusta; Amaro, Ana M.; Reis, Paulo. "Numerical Modeling of Damage Caused by Seawater Exposure on Mechanical Strength in Fiber-Reinforced Polymer Composites". Polymers 14 19 (2022): 3955. http://dx.doi.org/10.3390/polym14193955.
    Published • 10.3390/polym14193955
  20. Reis, P.N.B.; Neto, M.A.; Amaro, A.M.. "Multi-impact behaviour of composite laminates under constant and different energy levels". Composite Structures 294 (2022): 115788. http://dx.doi.org/10.1016/j.compstruct.2022.115788.
    Published • 10.1016/j.compstruct.2022.115788
  21. Valvez, Sara; Silva, Abilio P.; Reis, Paulo N. B.. "Optimization of Printing Parameters to Maximize the Mechanical Properties of 3D-Printed PETG-Based Parts". Polymers 14 13 (2022): 2564. http://dx.doi.org/10.3390/polym14132564.
    Open access • Published • 10.3390/polym14132564
  22. Valvez, Sara; Silva, Abílio P.; Reis, Paulo N. B.. "Compressive Behaviour of 3D-Printed PETG Composites". Aerospace 9 3 (2022): 124. http://dx.doi.org/10.3390/aerospace9030124.
    Published • 10.3390/aerospace9030124
  23. Monjon, Alice; Santos, Paulo; Valvez, Sara; Reis, Paulo N. B.. "Hybridization Effects on Bending and Interlaminar Shear Strength of Composite Laminates". Materials 15 4 (2022): 1302. http://dx.doi.org/10.3390/ma15041302.
    Published • 10.3390/ma15041302
  24. Abdelfattah, Ibrahim; Ferreira, Francisca; Nasr Saleh, Mohamed; Reis, Paulo NB; Teixeira De Freitas, Sofia. "Flexural performance of squared one-sided CFRP patches: modelling and experimental study". The Journal of Adhesion 99 3 (2022): 473-491. http://dx.doi.org/10.1080/00218464.2021.2024807.
    Published • 10.1080/00218464.2021.2024807
  25. S. Valvez; A.P. Silva; Reis, P.N.B.; F. Berto. "Annealing effect on mechanical properties of 3D printed composites". Procedia Structural Integrity 37 (2022): 738-745. https://doi.org/10.1016/j.prostr.2022.02.004.
    Published
  26. J.M. Parente; R. Simões; Reis, P.N.B.. "Effect of graphene nanoparticles on suspension viscosity and mechanical properties of epoxy-based nanocomposites". Procedia Structural Integrity 37 (2022): 820-825. https://doi.org/10.1016/j.prostr.2022.02.014.
    Published
  27. P. Santos; N. Bouhemame; Reis, P.N.B.; A. Bezazi. "Impact characterization of bio-based sandwich panels with cork core". Procedia Structural Integrity 37 (2022): 833-840. https://doi.org/10.1016/j.prostr.2022.02.016.
    Published
  28. M.P. Silva; P. Santos; J.M. Parente; S. Valvez; Reis, P.N.B.. "Effect of different hostile solutions on mechanical properties of composite materials". Procedia Structural Integrity 37 (2022): 841-846. https://doi.org/10.1016/j.prostr.2022.02.017.
    Published
  29. Reis, P.N.B.; S. Valvez; J.A.M. Ferreira. "Creep and stress relaxation behaviour of 3D printed nanocomposites". Procedia Structural Integrity 37 (2022): 934-940. https://doi.org/10.1016/j.prostr.2022.02.028.
    Published
  30. Branco, Ricardo; Reis, Paulo N. B.; Neto, Maria A.; Costa, José D.; Amaro, Ana M.. "Seawater Effect on Fatigue Behaviour of Notched Carbon/Epoxy Laminates". Applied Sciences 11 24 (2021): 11939. http://dx.doi.org/10.3390/app112411939.
    Published • 10.3390/app112411939
  31. Reis, Paulo N. B.; Coelho, Carlos A. C. P.; Navalho, Fábio V. P.. "Impact Response of Composite Sandwich Cylindrical Shells". Applied Sciences 11 22 (2021): 10958. http://dx.doi.org/10.3390/app112210958.
    Published • 10.3390/app112210958
  32. Messias, Ana; Gomes, Inês J.; Reis, Paulo N. B.; Amaro, Ana M.; Neto, Maria A.. "The Effectiveness of Dental Protection and the Material Arrangement in Custom-Made Mouthguards". Applied Sciences 11 20 (2021): 9363. http://dx.doi.org/10.3390/app11209363.
    Published • 10.3390/app11209363
  33. Reis, Paulo N. B.; Silva, Marco P.; Santos, Paulo; Parente, João; Valvez, Sara. "Effect of Hostile Solutions on the Residual Fatigue Life of Kevlar/Epoxy Composites after Impact Loading". Molecules 26 18 (2021): 5520. http://dx.doi.org/10.3390/molecules26185520.
    Published • 10.3390/molecules26185520
  34. Khelifa, Hocine; Bezazi, Abderrezak; Boumediri, Haithem; Garcia del Pino, Gilberto; Reis, Paulo N.B.; Scarpa, Fabrizio; Dufresne, Alain. "Mechanical characterization of mortar reinforced by date palm mesh fibers: Experimental and statistical analysis". Construction and Building Materials 300 (2021): 124067. http://dx.doi.org/10.1016/j.conbuildmat.2021.124067.
    Published • 10.1016/j.conbuildmat.2021.124067
  35. Budzik, Michal K.; Wolfahrt, Markus; Reis, Paulo; Kozlowski, Marcin; Sena-Cruz, José; Papadakis, Loucas; Nasr Saleh, Mohamed; et al. "Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview". The Journal of Adhesion 98 14 (2021): 2133-2209. http://dx.doi.org/10.1080/00218464.2021.1953479.
    Published • 10.1080/00218464.2021.1953479
  36. Silva, Marco P.; Santos, Paulo; Parente, João; Valvez, Sara; Reis, Paulo N. B.. "Effect of Harsh Environmental Conditions on the Impact Response of Carbon Composites with Filled Matrix by Cork Powder". Applied Sciences 11 16 (2021): 7436. http://dx.doi.org/10.3390/app11167436.
    Published • 10.3390/app11167436
  37. Pereira, Miguel A. R.; Amaro, Ana M.; Reis, Paulo N. B.; Loureiro, Altino. "Effect of Friction Stir Welding Techniques and Parameters on Polymers Joint Efficiency—A Critical Review". Polymers 13 13 (2021): 2056. http://dx.doi.org/10.3390/polym13132056.
    Published • 10.3390/polym13132056
  38. Santos, P.; Maceiras, Alberto; Reis, P. N. B.. "Influence of manufacturing parameters on the mechanical properties of nano-reinforced CFRP by carbon nanofibers". IOP Conference Series: Materials Science and Engineering 1126 1 (2021): 012012. http://dx.doi.org/10.1088/1757-899x/1126/1/012012.
    Published • 10.1088/1757-899x/1126/1/012012
  39. Valvez, Sara; Reis, Paulo N. B.; Susmel, Luca; Berto, Filippo. "Fused Filament Fabrication-4D-Printed Shape Memory Polymers: A Review". Polymers 13 5 (2021): 701. http://dx.doi.org/10.3390/polym13050701.
    10.3390/polym13050701
  40. Valvez, Sara; Maceiras, Alberto; Santos, Paulo; Reis, Paulo N. B.. "Olive Stones as Filler for Polymer-Based Composites: A Review". Materials 14 4 (2021): 845. http://dx.doi.org/10.3390/ma14040845.
    10.3390/ma14040845
  41. Santos, Mário; Santos, Jaime; Reis, Paulo; Amaro, Ana. "Ultrasonic C-scan techniques for the evaluation of impact damage in CFRP". Materials Testing 63 2 (2021): 131-137. http://dx.doi.org/10.1515/mt-2020-0020.
    10.1515/mt-2020-0020
  42. Bouhemame, N.; Aiadi, K.E.; Bezazi, A.; Boumediri, H.; Reis, P.N.B.; Imad, A.; Scarpa, F.. "Tensile Properties Optimization of Date Palm Leaflets Using Taguchi Method". Journal of Natural Fibers (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85104850315&partnerID=MN8TOARS.
    10.1080/15440478.2021.1916674
  43. Santos, P.; Maceiras, A.; Valvez, S.; Reis, P.N.B.. "Mechanical characterization of different epoxy resins enhanced with carbon nanofibers". Frattura ed Integrita Strutturale 15 55 (2021): 198-212. http://www.scopus.com/inward/record.url?eid=2-s2.0-85099519533&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.55.15
  44. Moreira, M.; Ramos, J.C.; Messias, A.; Neto, M.A.; Amaro, A.; Reis, P.N.B.. "Impact response of different materials for sports mouthguards". Frattura ed Integrita Strutturale 15 57 (2021): 63-69. http://www.scopus.com/inward/record.url?eid=2-s2.0-85109214603&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.57.06
  45. Amaro, Ana Martins; Reis, Paulo Nobre Balbis; Ivañez, Ines; Sánchez-Saez, Sonia; Garcia-Castillo, Shirley Kalamis; Barbero, Enrique. "The High-Velocity Impact Behaviour of Kevlar Composite Laminates Filled with Cork Powder". Applied Sciences 10 17 (2020): 6108. http://dx.doi.org/10.3390/app10176108.
    10.3390/app10176108
  46. Ivañez, I.; Sánchez-Saez, S.; Garcia-Castillo, S.K.; Barbero, E.; Amaro, A.; Reis, P.N.B.. "High-velocity impact behaviour of damaged sandwich plates with agglomerated cork core". Composite Structures 248 (2020): 112520. http://dx.doi.org/10.1016/j.compstruct.2020.112520.
    10.1016/j.compstruct.2020.112520
  47. Silva, Marco P.; Santos, Paulo; Parente, João M.; Valvez, Sara; Reis, Paulo N. B.; Piedade, Ana P.. "Effect of Post-Cure on the Static and Viscoelastic Properties of a Polyester Resin". Polymers 12 9 (2020): 1927. http://dx.doi.org/10.3390/polym12091927.
    10.3390/polym12091927
  48. Reis, P.N.B.; Silva, M.P.; Santos, P.; Parente, J.M.; Valvez, S.; Bezazi, A.. "Mechanical performance of an optimized cork agglomerate core-glass fibre sandwich panel". Composite Structures 245 (2020): 112375. http://dx.doi.org/10.1016/j.compstruct.2020.112375.
    Published • 10.1016/j.compstruct.2020.112375
  49. Hirulkar, N.S.; Jaiswal, P.R.; Reis, P.N.B.; Ferreira, J.A.M.. "Effect of hygrothermal aging and cyclic thermal shocks on the mechanical performance of single-lap adhesive joints". International Journal of Adhesion and Adhesives 99 (2020): 102584. http://dx.doi.org/10.1016/j.ijadhadh.2020.102584.
    Published • 10.1016/j.ijadhadh.2020.102584
  50. Ivañez, Ines; Sánchez-Saez, Sonia; Garcia-Castillo, Shirley K.; Barbero, Enrique; Amaro, Ana M.; Reis, Paulo N. B.. "Impact response of repaired sandwich structures". Polymer Composites 41 8 (2020): 3014-3022. http://dx.doi.org/10.1002/pc.25593.
    10.1002/pc.25593
  51. Parente, João; Reis, Paulo N. B.; Neto, M.; M. Amaro, A.. "Mechanical Properties of Sandwich Composites Reinforced by Nanoclays: An Overview". Applied Sciences 10 7 (2020): 2637. http://dx.doi.org/10.3390/app10072637.
    Published • 10.3390/app10072637
  52. Amaro, A.M.; Loureiro, A.J.R.; Neto, M.A.; Reis, P.N.B.. "Residual impact strength of glass/epoxy composite laminates after solid particle erosion". Composite Structures 238 (2020): 112026. http://dx.doi.org/10.1016/j.compstruct.2020.112026.
    Published • 10.1016/j.compstruct.2020.112026
  53. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.; Santos, M.; Santos, J.B.. "Effect of the electric current on the stress relaxation behaviour of CFRP composites". Thin-Walled Structures 149 (2020): 106659. http://dx.doi.org/10.1016/j.tws.2020.106659.
    Published • 10.1016/j.tws.2020.106659
  54. Amaro, A. M.; Reis, P. N. B.; Loureiro, A.. "Effect of friction-stir weld parameters on hybrid bonded joints". The Journal of Adhesion 97 12 (2020): 1136-1152. http://dx.doi.org/10.1080/00218464.2020.1736572.
    Published • 10.1080/00218464.2020.1736572
  55. Reis, P.N.B.; Silva, M.P.; Santos, P.; Parente, J.M.; Bezazi, Abderrezak. "Viscoelastic behaviour of composites with epoxy matrix filled by cork powder". Composite Structures 234 (2020): 111669. http://dx.doi.org/10.1016/j.compstruct.2019.111669.
    Published • 10.1016/j.compstruct.2019.111669
  56. Santos, P.; Valvez, S.; Monjon, A.; Reis, P.N.B.. "The hybridisation effect on the viscoelastic properties of polymeric composites". Procedia Structural Integrity 28 (2020): 1816-1826. http://dx.doi.org/10.1016/j.prostr.2020.11.004.
    Published • 10.1016/j.prostr.2020.11.004
  57. Silva, M.P.; Santos, P.; Parente, J.M.; Valvez, S.; Reis, P.N.B.. "Hybridization effect on the impact properties of flax composites". Procedia Structural Integrity 28 (2020): 2235-2244. http://dx.doi.org/10.1016/j.prostr.2020.11.052.
    Published • 10.1016/j.prostr.2020.11.052
  58. Parente, J.M.; Santos, P.; Valvez, S.; Silva, M.P.; Reis, P.N.B.. "Fatigue behaviour of graphene composites: An overview". Procedia Structural Integrity 25 (2020): 282-293. http://dx.doi.org/10.1016/j.prostr.2020.04.033.
    Published • 10.1016/j.prostr.2020.04.033
  59. Santos, P.; Parente, J.P.; Valvez, S.; Silva, M.P.; Reis, P.N.B.. "Hybridization effect on the bending properties of flax composites". Procedia Structural Integrity 25 (2020): 370-377. http://dx.doi.org/10.1016/j.prostr.2020.04.042.
    Published • 10.1016/j.prostr.2020.04.042
  60. Valvez, S.; Santos, P.; Parente, J.M.; Silva, M.P.; Reis, P.N.B.. "3D printed continuous carbon fiber reinforced PLA composites: A short review". Procedia Structural Integrity 25 (2020): 394-399. http://dx.doi.org/10.1016/j.prostr.2020.04.056.
    Published • 10.1016/j.prostr.2020.04.056
  61. Bezazi, A.; Boumediri, H.; Garcia del Pino, G.; Bezzazi, B.; Scarpa, F.; Reis, P.N.B.; Dufresne, A.. "Alkali Treatment Effect on Physicochemical and Tensile Properties of Date Palm Rachis Fibers". Journal of Natural Fibers (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85097392495&partnerID=MN8TOARS.
    10.1080/15440478.2020.1848726
  62. Amaro, A.M.; Loureiro, A.; Reis, P.N.B.. "Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints". Frattura ed Integrita Strutturale 14 53 (2020): 124-133. http://www.scopus.com/inward/record.url?eid=2-s2.0-85086503748&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.53.10
  63. Reis, Paulo Nobre Balbis dos; Amaro, Ana Martins; Neto, Maria Augusta. "Effect of Fibre Orientation and Hostile Solutions on Stress Relaxation of Glass/Polyamide Composites". Polymers 12 1 (2019): 20. http://dx.doi.org/10.3390/polym12010020.
    Published • 10.3390/polym12010020
  64. Simionescu, Tudor Mihai; Minea, Alina Adriana; Reis, Paulo Nobre Balbis dos. "Fire Properties of Acrylonitrile Butadiene Styrene Enhanced with Organic Montmorillonite and Exolit Fire Retardant". Applied Sciences 9 24 (2019): 5433. http://dx.doi.org/10.3390/app9245433.
    Published • 10.3390/app9245433
  65. Hirulkar, N.S.; Jaiswal, P.R.; Reis, P.N.B.; Ferreira, J.A.M.. "Bending strength of single-lap adhesive joints under hygrothermal aging combined with cyclic thermal shocks". The Journal of Adhesion 97 5 (2019): 493-507. http://dx.doi.org/10.1080/00218464.2019.1681981.
    Published • 10.1080/00218464.2019.1681981
  66. Parente, João M.; Silva, Marco P.; Santos, Paulo; Reis, Paulo N.B.. "Viscoelastic behaviour of nanocomposites enhanced by graphene: An overview". Material Design & Processing Communications 1 6 (2019): http://dx.doi.org/10.1002/mdp2.99.
    Published • 10.1002/mdp2.99
  67. Reis, P.N.B.; Neto, M.A.; Amaro, A.M.. "Effect of hostile solutions on stress relaxation of carbon/epoxy composites". Polymer Degradation and Stability 165 (2019): 60-67. http://dx.doi.org/10.1016/j.polymdegradstab.2019.04.026.
    Published • 10.1016/j.polymdegradstab.2019.04.026
  68. Reis, P. N. B.; Silva, M. P.; Santos, P.. "Stress Relaxation in Delaminated Carbon/Epoxy Composites". Fibers and Polymers 20 6 (2019): 1284-1289. http://dx.doi.org/10.1007/s12221-019-8916-x.
    Published • 10.1007/s12221-019-8916-x
  69. Amaro, Ana M.; Neto, Maria A.; Cirne, José S.; Reis, Paulo N.B.. "Mechanical Characterization of Different Aluminium Foams at High Strain Rates". Materials 12 9 (2019): 1428. http://dx.doi.org/10.3390/ma12091428.
    Published • 10.3390/ma12091428
  70. Amaro, Ana M.; Neto, Maria A.; Reis, Paulo N.B.. "Mechanical characterization of AlSi12 foams at high strain rates". Material Design & Processing Communications 1 3 (2019): e55. http://dx.doi.org/10.1002/mdp2.55.
    Published • 10.1002/mdp2.55
  71. Campos Pais Coelho, Carlos Alexandre; Navalho, Fábio V.P.; Reis, P.N.B.. "Impact response of laminated cylindrical shells". Frattura ed Integrità Strutturale 13 48 (2019): 411-418. http://dx.doi.org/10.3221/igf-esis.48.39.
    Published • 10.3221/igf-esis.48.39
  72. Silva, Marco P.; Santos, Paulo; Sousa, Nuno N.; Reis, Paulo N.B.. "Strain rate effect on composites with epoxy matrix filled by cork powder". Material Design & Processing Communications 1 2 (2019): e47. http://dx.doi.org/10.1002/mdp2.47.
    Published • 10.1002/mdp2.47
  73. Reis, P.N.B.; Gorbatikh, L.; Ivens, J.; Lomov, S.V.. "Strain-rate sensitivity and stress relaxation of hybrid self-reinforced polypropylene composites under bending loads". Composite Structures 209 (2019): 802-810. http://dx.doi.org/10.1016/j.compstruct.2018.11.030.
    Published • 10.1016/j.compstruct.2018.11.030
  74. Miluski, P.; Kochanowicz, M.; Zmojda, J.; Silva, A.P.; Reis, P.N.B.; Ragin, T.; Dorosz, D.. "UV sensing optode for composite materials environment monitoring". Science and Engineering of Composite Materials 26 1 (2019): 240-243. http://dx.doi.org/10.1515/secm-2019-0008.
    Published • 10.1515/secm-2019-0008
  75. Reis, P. N. B.; Amaro, A. M.; Neto, M. A.; Cirne, J. S.. "Effect of Hostile Solutions on Composites Laminates Subjected to Low and High Velocity Impact Loads". Fibers and Polymers 20 1 (2019): 158-164. http://dx.doi.org/10.1007/s12221-019-8477-z.
    Published • 10.1007/s12221-019-8477-z
  76. Amaro, A.M.; Neto, M.A.; Loureiro, A.J.R.; Silva, M.P.; Reis, P.N.B.. "Repair Delaminations in Carbon/epoxy Laminates". MATEC Web of Conferences 253 (2019): 02001. http://dx.doi.org/10.1051/matecconf/201925302001.
    Published • 10.1051/matecconf/201925302001
  77. Reis, Paulo. "Ultrasonic C-scan Techniques for Damage Evaluation of Carbon Fiber Reinforced Polymers Submitted to Low Energy Impacts". Proceedings of Meetings on Acoustics 38 030002 (2019): 1-5. https://doi.org/10.1121/2.0001062.
    Published
  78. Reis, P. N. B.; Santos, R. A. M.; Silva, F. G. A.; de Moura, M. F. S. F.. "Influence of Hole Distance on Low Velocity Impact Damage". Fibers and Polymers 19 12 (2018): 2574-2580. http://dx.doi.org/10.1007/s12221-018-8376-8.
    Published • 10.1007/s12221-018-8376-8
  79. Amaro, A.M.; Pinto, M.I.M.; Reis, P.N.B.; Neto, M.A.; Lopes, S.M.R.. "Structural integrity of glass/epoxy composites embedded in cement or geopolymer mortars". Composite Structures 206 (2018): 509-516. http://dx.doi.org/10.1016/j.compstruct.2018.08.060.
    Published • 10.1016/j.compstruct.2018.08.060
  80. Amaro, A.M.; Neto, M.A.; Loureiro, A.; Reis, P.N.B.. "Taper’s angle influence on the structural integrity of single-lap bonded joints". Theoretical and Applied Fracture Mechanics 96 (2018): 231-246. http://dx.doi.org/10.1016/j.tafmec.2018.05.006.
    Published • 10.1016/j.tafmec.2018.05.006
  81. Reis, P.N.B.; Neto, M.A.; Amaro, A.M.. "Effect of the extreme conditions on the tensile impact strength of GFRP composites". Composite Structures 188 (2018): 48-54. http://dx.doi.org/10.1016/j.compstruct.2018.01.001.
    Published • 10.1016/j.compstruct.2018.01.001
  82. Hirulkar, N.S.; Jaiswal, P.R.; Alessandro, Pirondi; Reis, Paulo. "Influence of Mechanical surface treatment on the strength of mixed adhesive joint". Materials Today: Proceedings 5 9 (2018): 18776-18788. http://dx.doi.org/10.1016/j.matpr.2018.06.224.
    Published • 10.1016/j.matpr.2018.06.224
  83. Reis, P.N.B.; Gorbatikh, L.; Ivens, J.; Lomov, S.V.. "Viscoelastic Behaviour of Self-reinforced Polypropylene Composites under Bending Loads". Procedia Structural Integrity 13 (2018): 1999-2004. http://dx.doi.org/10.1016/j.prostr.2018.12.217.
    Published • 10.1016/j.prostr.2018.12.217
  84. Amaro, A.M.; Reis, P.N.B.; Santos, J.B.; Santos, M.J.; Neto, M.A.. "Effect of the electric current on the impact fatigue strength of CFRP composites". Composite Structures 182 (2017): 191-198. http://dx.doi.org/10.1016/j.compstruct.2017.09.032.
    Published • 10.1016/j.compstruct.2017.09.032
  85. Santos, R.A.M.; Reis, P.N.B.; Silva, F.G.A.; de Moura, M.F.S.F.. "Influence of inclined holes on the impact strength of CFRP composites". Composite Structures 172 (2017): 130-136. http://dx.doi.org/10.1016/j.compstruct.2017.03.086.
    Published • 10.1016/j.compstruct.2017.03.086
  86. Santos, R.A.M.; Reis, P.N.B.; Santos, M.J.; Coelho, C.A.C.P.. "Effect of distance between impact point and hole position on the impact fatigue strength of composite laminates". Composite Structures 168 (2017): 33-39. http://dx.doi.org/10.1016/j.compstruct.2017.02.045.
    Published • 10.1016/j.compstruct.2017.02.045
  87. Coelho, S.R.M.; Reis, P.N.B.; Ferreira, J.A.M.; Pereira, A.M.. "Effects of external patch configuration on repaired composite laminates subjected to multi-impacts". Composite Structures 168 (2017): 259-265. http://dx.doi.org/10.1016/j.compstruct.2017.02.069.
    Published • 10.1016/j.compstruct.2017.02.069
  88. Miluski, Piotr; Kochanowicz, Marcin; Zmojda, Jacek; Silva, AbíLio P.; Reis, Paulo N. B.; Dorosz, Dominik. "Carbon laminates with RE doped optical fibre sensors". Open Engineering 6 1 (2016): http://dx.doi.org/10.1515/eng-2016-0058.
    Published • 10.1515/eng-2016-0058
  89. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.; Neto, M. A.. "Multi-impact response of composite laminates with open holes". Polymer Composites 39 7 (2016): 2490-2498. http://dx.doi.org/10.1002/pc.24235.
    Published • 10.1002/pc.24235
  90. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.. "Experimental study of temperature effects on composite laminates subjected to multi-impacts". Composites Part B: Engineering 98 (2016): 23-29. http://dx.doi.org/10.1016/j.compositesb.2016.05.021.
    Published • 10.1016/j.compositesb.2016.05.021
  91. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.; Cirne, J.M.. "Residual impact strength of carbon/epoxy laminates after flexural loadings". Composite Structures 146 (2016): 69-74. http://dx.doi.org/10.1016/j.compstruct.2016.03.006.
    Published • 10.1016/j.compstruct.2016.03.006
  92. Reis, P. N. B.; Pereira, A. M.; Ferreira, J. A. M.; Costa, J. D. M.. "Cyclic creep response of adhesively bonded steel lap joints". The Journal of Adhesion 93 9 (2016): 704-715. http://dx.doi.org/10.1080/00218464.2016.1146880.
    Published • 10.1080/00218464.2016.1146880
  93. Reis, P.N.B.; Monteiro, J.F.R.; Pereira, A.M.; Ferreira, J.A.M.; Costa, J.D.M.. "Fatigue behaviour of epoxy-steel single lap joints under variable frequency". International Journal of Adhesion and Adhesives 63 (2015): 66-73. http://dx.doi.org/10.1016/j.ijadhadh.2015.08.008.
    Published • 10.1016/j.ijadhadh.2015.08.008
  94. Reis, P.N.B.; Soares, J.R.L.; Pereira, A.M.; Ferreira, J.A.M.. "Effect of adherends and environment on static and transverse impact response of adhesive lap joints". Theoretical and Applied Fracture Mechanics 80 (2015): 79-86. http://dx.doi.org/10.1016/j.tafmec.2015.07.004.
    Published • 10.1016/j.tafmec.2015.07.004
  95. Pereira, A. M.; Reis, P. N. B.; Ferreira, J. A. M.. "Effect of the mean stress on the fatigue behaviour of single lap joints". The Journal of Adhesion 93 6 (2015): 504-513. http://dx.doi.org/10.1080/00218464.2015.1110699.
    Published • 10.1080/00218464.2015.1110699
  96. Javadi, S.; Sadroddini, M.; Razzaghi-Kashani, M.; Reis, P. N. B.; Balado, A. A.. "Interfacial effects on dielectric properties of ethylene propylene rubber–titania nano- and micro-composites". Journal of Polymer Research 22 8 (2015): http://dx.doi.org/10.1007/s10965-015-0805-4.
    Published • 10.1007/s10965-015-0805-4
  97. Javadi, S.; Razzaghi-Kashani, M.; Reis, P.N.B.; Balado, A.A.. "Interfacial effects on dielectric properties of polymethylmethacrylate-titania microcomposites and nanocomposites". Polymer Composites 38 6 (2015): 1158-1166. http://dx.doi.org/10.1002/pc.23679.
    Published • 10.1002/pc.23679
  98. Reis, P. N. B.; Ferreira, J. A. M.; Antunes, F. V.; Costa, J. D. M.. "Initial crack length on the interlaminar fracture of woven carbon/epoxy laminates". Fibers and Polymers 16 4 (2015): 894-901. http://dx.doi.org/10.1007/s12221-015-0894-z.
    Published • 10.1007/s12221-015-0894-z
  99. Minea, Alina Adriana; Amaro, Ana Martins; Antunes, Fernando Ventura; Neto, Maria Augusta; Reis, Paulo Nobre Balbis. "RESONANT TECHNIQUES AS NON-DESTRUCTIVE TECHNIQUES (NDT) APPLIED TO COMPOSITE MATERIALS: CASE STUDY ON LOW VELOCITY IMPACTS DETECTION". Environmental Engineering and Management Journal 14 5 (2015): 1045-1052. http://dx.doi.org/10.30638/eemj.2015.115.
    Published • 10.30638/eemj.2015.115
  100. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.; Louro, C.. "Effect of different commercial oils on mechanical properties of composite materials". Composite Structures 118 (2014): 1-8. http://dx.doi.org/10.1016/j.compstruct.2014.07.017.
    Published • 10.1016/j.compstruct.2014.07.017
  101. Mortas, Nurdane; N.B. Reis, Paulo; A.M. Ferreira, José. "Impact response of balsa core sandwiches". Frattura ed Integrità Strutturale 8 30 (2014): 403-408. http://dx.doi.org/10.3221/igf-esis.30.48.
    Published • 10.3221/igf-esis.30.48
  102. Reis, Paulo N.B.; Ferreira, José A.M.; Costa, José D.M.; Pereira, António M.. "Interlaminar fracture in woven carbon/epoxy laminates". Frattura ed Integrità Strutturale 8 30 (2014): 431-438. http://dx.doi.org/10.3221/igf-esis.30.52.
    Published • 10.3221/igf-esis.30.52
  103. Ferreira, J. A. M.; Reis, P. N. B.; Costa, J. D. M.; Capela, C.. "Assessment of the mechanical properties of nanoclays enhanced low Tg epoxy resins". Fibers and Polymers 15 8 (2014): 1677-1684. http://dx.doi.org/10.1007/s12221-014-1677-7.
    Published • 10.1007/s12221-014-1677-7
  104. Amaro, A. M.; Reis, P. N. B.; de Moura, M. F. S. F.; Neto, M. A.. "Buckling analysis of laminated composite plates submitted to compression after impact". Fibers and Polymers 15 3 (2014): 560-565. http://dx.doi.org/10.1007/s12221-014-0560-x.
    Published • 10.1007/s12221-014-0560-x
  105. Mortas, N.; Er, O.; Reis, P.N.B.; Ferreira, J.A.M.. "Effect of corrosive solutions on composites laminates subjected to low velocity impact loading". Composite Structures 108 (2014): 205-211. http://dx.doi.org/10.1016/j.compstruct.2013.09.032.
    Published • 10.1016/j.compstruct.2013.09.032
  106. Reis, P.N.B.; Ferreira, J.A.M.; Zhang, Z.Y.; Benameur, T.; Richardson, M.O.W.. "Impact strength of composites with nano-enhanced resin after fire exposure". Composites Part B: Engineering 56 (2014): 290-295. http://dx.doi.org/10.1016/j.compositesb.2013.08.048.
    Published • 10.1016/j.compositesb.2013.08.048
  107. Pereira, A.M.; Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.. "Effect of saline environment on mechanical properties of adhesive joints". International Journal of Adhesion and Adhesives 47 (2013): 99-104. http://dx.doi.org/10.1016/j.ijadhadh.2013.08.002.
    Published • 10.1016/j.ijadhadh.2013.08.002
  108. Reis, P. N. B.; Ferreira, J. A. M.; Pereira, A. M.; Antunes, F. J. V.. "Influence of Superposition Length on Transverse Impact Response of Single-Strap Adhesive Joints". The Journal of Adhesion 90 1 (2013): 65-79. http://dx.doi.org/10.1080/00218464.2013.797341.
    Published • 10.1080/00218464.2013.797341
  109. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.; Neto, M.A.. "Influence of multi-impacts on GFRP composites laminates". Composites Part B: Engineering 52 (2013): 93-99. http://dx.doi.org/10.1016/j.compositesb.2013.03.041.
    Published • 10.1016/j.compositesb.2013.03.041
  110. Reis, P. N. B.; Silva, A. P.; Santos, P.; Ferreira, J. A. M.. "Hygrothermal Effect on the Impact Response of Carbon Composites with Epoxy Resin Enhanced by Nanoclays". Mechanics of Composite Materials 49 4 (2013): 429-436. http://dx.doi.org/10.1007/s11029-013-9359-x.
    Published • 10.1007/s11029-013-9359-x
  111. Amaro, AM; Reis, PNB; Neto, MA; Louro, C. "Effect of different acid solutions on glass/epoxy composites". Journal of Reinforced Plastics and Composites 32 14 (2013): 1018-1029. http://dx.doi.org/10.1177/0731684413483886.
    10.1177/0731684413483886
  112. Amaro, A.M.; Reis, P.N.B.; Neto, M.A.; Louro, C.. "Effects of alkaline and acid solutions on glass/epoxy composites". Polymer Degradation and Stability 98 4 (2013): 853-862. http://dx.doi.org/10.1016/j.polymdegradstab.2012.12.029.
    Published • 10.1016/j.polymdegradstab.2012.12.029
  113. Reis, PNB; Santos, P; Ferreira, JAM; Richardson, MOW. "Impact response of sandwich composites with nano-enhanced epoxy resin". Journal of Reinforced Plastics and Composites 32 12 (2013): 898-906. http://dx.doi.org/10.1177/0731684413478993.
    Published • 10.1177/0731684413478993
  114. Amaro, A.M.; Reis, P.N.B.; de Moura, M.F.S.F.; Neto, M.A.. "Influence of open holes on composites delamination induced by low velocity impact loads". Composite Structures 97 (2013): 239-244. http://dx.doi.org/10.1016/j.compstruct.2012.09.041.
    Published • 10.1016/j.compstruct.2012.09.041
  115. Reis, P.N.B.; Ferreira, J.A.M.; Zhang, Z.Y.; Benameur, T.; Richardson, M.O.W.. "Impact response of Kevlar composites with nanoclay enhanced epoxy matrix". Composites Part B: Engineering 46 (2013): 7-14. http://dx.doi.org/10.1016/j.compositesb.2012.10.028.
    Published • 10.1016/j.compositesb.2012.10.028
  116. Reis, P.N.B.; Ferreira, J.A.M.; Santos, P.; Richardson, M.O.W.; Santos, J.B.. "Impact response of Kevlar composites with filled epoxy matrix". Composite Structures 94 12 (2012): 3520-3528. http://dx.doi.org/10.1016/j.compstruct.2012.05.025.
    Published • 10.1016/j.compstruct.2012.05.025
  117. Reis, P. N. B.; Ferreira, J. A. M.; Costa, J. D. M.; Santos, M. J.. "Fatigue performance of Kevlar/epoxy composites with filled matrix by cork powder". Fibers and Polymers 13 10 (2012): 1292-1299. http://dx.doi.org/10.1007/s12221-012-1292-4.
    Published • 10.1007/s12221-012-1292-4
  118. Dhakal, H.N.; Zhang, Z.Y.; Bennett, N.; Reis, P.N.B.. "Low-velocity impact response of non-woven hemp fibre reinforced unsaturated polyester composites: Influence of impactor geometry and impact velocity". Composite Structures 94 9 (2012): 2756-2763. http://dx.doi.org/10.1016/j.compstruct.2012.04.004.
    Published • 10.1016/j.compstruct.2012.04.004
  119. Dhakal, H. N.; Zhang, Z. Y.; Reis, P. N. B.; Surip, S. N.; Bennett, N.. "Evaluation of Water Absorption Damage in Hemp Fibre Reinforced Unsaturated Polyester Composites by the Nanoindentation Testing". Journal of Biobased Materials and Bioenergy 6 4 (2012): 493-499. http://dx.doi.org/10.1166/jbmb.2012.1230.
    Published • 10.1166/jbmb.2012.1230
  120. Ferreira, JAM; Reis, PNB; Costa, JDM; Richardson, MOW. "Fatigue behaviour of Kevlar composites with nanoclay-filled epoxy resin". Journal of Composite Materials 47 15 (2012): 1885-1895. http://dx.doi.org/10.1177/0021998312452024.
    Published • 10.1177/0021998312452024
  121. Amaro, Ana M.; Reis, Paulo Nobre Balbis; de Moura, Marcelo; Santos, Jaime B.. "Influence of the specimen thickness on low velocity impact behavior of composites". Journal of Polymer Engineering 32 1 (2012): http://dx.doi.org/10.1515/polyeng-2011-0101.
    Published • 10.1515/polyeng-2011-0101
  122. Amaro, A M; Reis, P N B; de Moura, M F S F; Santos, J B. "Damage detection on laminated composite materials using several NDT techniques". Insight - Non-Destructive Testing and Condition Monitoring 54 1 (2012): 14-20. http://dx.doi.org/10.1784/insi.2012.54.1.14.
    Published • 10.1784/insi.2012.54.1.14
  123. Ferreira, JAM; Reis, PNB; Costa, JDM; Richardson, MOW. "A study of the mechanical behaviour on injection moulded nanoclay enhanced polypropylene composites". Journal of Thermoplastic Composite Materials 26 6 (2011): 721-732. http://dx.doi.org/10.1177/0892705711428658.
    Published • 10.1177/0892705711428658
  124. Ferreira, J.A.M.; Reis, P.N.B.; Costa, J.D.M.; Richardson, B.C.H.; Richardson, M.O.W.. "A study of the mechanical properties on polypropylene enhanced by surface treated nanoclays". Composites Part B: Engineering 42 6 (2011): 1366-1372. http://dx.doi.org/10.1016/j.compositesb.2011.05.038.
    Published • 10.1016/j.compositesb.2011.05.038
  125. Reis, P.N.B.; Ferreira, J.M.; Richardson, M.O.W.. "Effect of the Surface Preparation on PP Reinforced Glass Fiber Adhesive Lap Joints Strength". Journal of Thermoplastic Composite Materials 25 1 (2011): 3-13. http://dx.doi.org/10.1177/0892705711408161.
    Published • 10.1177/0892705711408161
  126. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.. "Effect of adherend's rigidity on the shear strength of single lap adhesive joints". International Journal of Adhesion and Adhesives 31 4 (2011): 193-201. http://dx.doi.org/10.1016/j.ijadhadh.2010.12.003.
    Published • 10.1016/j.ijadhadh.2010.12.003
  127. Reis, Paulo. "Simulation of Flow and Mass Transfer in a Fluidized Bed Having Different Fluidization Rates with Syamlal-O'Brien Model". Metalurgia 63 5 (2011): 5-10.
    Published
  128. Reis, P. N. B.; Ferreira, J. A. M.; Silva, P. A. A.. "Mechanical behaviour of composites filled by agro-waste materials". Fibers and Polymers 12 2 (2011): 240-246. http://dx.doi.org/10.1007/s12221-011-0240-z.
    Published • 10.1007/s12221-011-0240-z
  129. Amaro, A. M.; Reis, P. N. B.; de Moura, M. F. S. F.. "Delamination Effect on Bending Behaviour in Carbon-Epoxy Composites". Strain 47 2 (2011): 203-208. http://dx.doi.org/10.1111/j.1475-1305.2008.00520.x.
    Published • 10.1111/j.1475-1305.2008.00520.x
  130. Galán, J.; Samek, L.; Verleysen, P.; Verbeken, K.; Houbaert, Y.. "High Strength Steels for Safety Applications in Automotive Industry". Metalurgia International 16 6 (2011): 5-9. http://dx.doi.org/10.3989/revmetalm.1158.
    Published • 10.3989/revmetalm.1158
  131. Harte, A.M.; McNamara, J.F.. "Heat Transfer in Composite Materials". Metalurgia 63 6 (2011): 5-14. http://dx.doi.org/10.4028/www.scientific.net/kem.86-87.115.
    Published • 10.4028/www.scientific.net/kem.86-87.115
  132. Reis, Paulo N. B.; Ferreira, José A. M.; Richardson, Mel O. W.. "Fatigue Damage Characterization by NDT in Polypropylene/Glass Fibre Composites". Applied Composite Materials 18 5 (2010): 409-419. http://dx.doi.org/10.1007/s10443-010-9172-9.
    Published • 10.1007/s10443-010-9172-9
  133. Reis, P. N. B.; Ferreira, J. A. M.; Rodrigues, N. F. S.. "Impact Behaviour of Panels for Automotive Applications". Strain 47 (2010): 79-86. http://dx.doi.org/10.1111/j.1475-1305.2010.00735.x.
    Published • 10.1111/j.1475-1305.2010.00735.x
  134. Amaro, A.M.; Reis, P.N.B.. "Environmental Effects on Compressive Strength after Impact Loads in Composite Laminates". Advanced Composites Letters 19 3 (2010): 109-112. http://dx.doi.org/10.1177/096369351001900302.
    Published • 10.1177/096369351001900302
  135. Pernica, D.; Reis, P. N. B.; Ferreira, J. A. M.; Louda, P.. "Effect of test conditions on the bending strength of a geopolymer-reinforced composite". Journal of Materials Science 45 3 (2010): 744-749. http://dx.doi.org/10.1007/s10853-009-3994-6.
    Published • 10.1007/s10853-009-3994-6
  136. de Moura, M.F.S.F.; Campilho, R.D.S.G.; Amaro, A.M.; Reis, P.N.B.. "Interlaminar and intralaminar fracture characterization of composites under mode I loading". Composite Structures 92 1 (2010): 144-149. http://dx.doi.org/10.1016/j.compstruct.2009.07.012.
    Published • 10.1016/j.compstruct.2009.07.012
  137. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.; Richardson, M.O.W.. "Effect of Interlayer Delamination on Mechanical Behavior of Carbon/Epoxy Laminates". Journal of Composite Materials 43 22 (2009): 2609-2621. http://dx.doi.org/10.1177/0021998309344649.
    Published • 10.1177/0021998309344649
  138. Amaro, A. M.; Reis, P. N. B.; Magalhães, A. G.; de Moura, M. F. S. F.. "The Influence of the Boundary Conditions on Low-Velocity Impact Composite Damage". Strain 47 (2009): e220-e226. http://dx.doi.org/10.1111/j.1475-1305.2008.00534.x.
    Published • 10.1111/j.1475-1305.2008.00534.x
  139. REIS, P; FERREIRA, J; COSTA, J; RICHARDSON, M. "Fatigue life evaluation for carbon/epoxy laminate composites under constant and variable block loading". Composites Science and Technology 69 2 (2009): 154-160. http://dx.doi.org/10.1016/j.compscitech.2008.09.043.
    Published • 10.1016/j.compscitech.2008.09.043
  140. Amaro, Ana M.; Reis, Paulo N.B.; de Moura, Marcelo F.S.F.. "The Effect of the Carbon Epoxy Plate’s Size under Low Velocity Impact". Materials Science Forum 587-588 (2008): 951-955. http://dx.doi.org/10.4028/www.scientific.net/msf.587-588.951.
    Published • 10.4028/www.scientific.net/msf.587-588.951
  141. Mitchell, M. R.; Link, R. E.; Antunes, F.; Ramalho, A.; Ferreira, J. A. M.; Capela, C.; Reis, P.. "Determination of Elastic Properties by Resonant Technique: A Sensitivity Analysis". Journal of Testing and Evaluation 36 1 (2008): 101041. http://dx.doi.org/10.1520/jte101041.
    Published • 10.1520/jte101041
  142. Amaro, Ana M.; Reis, Paulo N.B.; Magalhães, A.G.; de Moura, Marcelo F.S.F.. "The Effect of the Impactor Diameter and Boundary Conditions on Low Velocity Impact Composites Behaviour". Applied Mechanics and Materials 7-8 (2007): 217-222. http://dx.doi.org/10.4028/www.scientific.net/amm.7-8.217.
    Published • 10.4028/www.scientific.net/amm.7-8.217
  143. Reis, P.N.B.; Ferreira, J.A.M.; Antunes, F.V.; Costa, J.D.M.. "Flexural behaviour of hybrid laminated composites". Composites Part A Applied Science and Manufacturing 38 6 (2007): 1612-1620.
    Published • 10.1016/j.compositesa.2006.11.010
  144. Reis, Paulo N.B.; Ferreira, José A. Martins; Antunes, Fernando; Costa, José Domingos M.. "Fatigue Notch Sensibility of Thermoplastic Glass Fibre Composites". Materials Science Forum 514-516 (2006): 653-656. http://dx.doi.org/10.4028/www.scientific.net/msf.514-516.653.
    Published • 10.4028/www.scientific.net/msf.514-516.653
  145. Amaro, Ana M.; Reis, Paulo N.B.; de Moura, Marcelo F.S.F.. "Residual Strength after Low Velocity Impact in Carbon-Epoxy Laminates". Materials Science Forum 514-516 (2006): 624-628. http://dx.doi.org/10.4028/www.scientific.net/msf.514-516.624.
    Published • 10.4028/www.scientific.net/msf.514-516.624
  146. Reis, P. N. B; Ferreira, I. A. M; Costa, J. D. M; Richardson, M. O. "Creep behaviour of adhesive lap joints in thermoplastics composites". The Journal of Strain Analysis for Engineering Design 40 3 (2005): 287-294. http://dx.doi.org/10.1243/030932405x7700.
    Published • 10.1243/030932405x7700
  147. Reis, P.N.B.; Antunes, F.J.V.; Ferreira, J.A.M.. "Influence of superposition length on mechanical resistance of single-lap adhesive joints". Composite Structures 67 1 (2005): 125-133. http://dx.doi.org/10.1016/j.compstruct.2004.01.018.
    Published • 10.1016/j.compstruct.2004.01.018
  148. Reis, Paulo N.B.; Ferreira, José A. Martins; Costa, José Domingos M.; Richardson, M.O.W.. "Creep Behaviour of PP/Glass-Fibre Composite Adhesive Lap Joints". Key Engineering Materials 230-232 (2002): 315-318. http://dx.doi.org/10.4028/www.scientific.net/kem.230-232.315.
    Published • 10.4028/www.scientific.net/kem.230-232.315
  149. Ferreira, J.A.M; Reis, P.N; Costa, J.D.M; Richardson, M.O.W. "Fatigue behaviour of composite adhesive lap joints". Composites Science and Technology 62 10-11 (2002): 1373-1379. http://dx.doi.org/10.1016/s0266-3538(02)00082-9.
    Published • 10.1016/s0266-3538(02)00082-9
  150. Ferreira, J.A.M; Costa, J.D.M; Reis, P.N.B; Richardson, M.O.W. "Analysis of fatigue and damage in glass-fibre-reinforced polypropylene composite materials". Composites Science and Technology 59 10 (1999): 1461-1467. http://dx.doi.org/10.1016/s0266-3538(98)00185-7.
    Published • 10.1016/s0266-3538(98)00185-7
  151. Ferreira, J.A.M; Costa, J.D.M; Reis, P.N.B. "Static and fatigue behaviour of glass-fibre-reinforced polypropylene composites". Theoretical and Applied Fracture Mechanics 31 1 (1999): 67-74. http://dx.doi.org/10.1016/s0167-8442(98)00068-8.
    Published • 10.1016/s0167-8442(98)00068-8
  152. Ferreira, J.A.M.; Costa, J.D.M.; Reis, P.N.B.. "Fatigue and creep in titanium grade 2". International Journal of Fatigue 18 4 (1996): 227-233. http://dx.doi.org/10.1016/0142-1123(96)00001-1.
    Published • 10.1016/0142-1123(96)00001-1
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2021/09/02 Creep and stress relaxation behaviour of 3D printed nanocomposites 4th International Conference on Structural Integrity - ICSI2021
(Virtual event)
2020/01/20 The Effect of Hostile Solutions on the Mechanical Properties of Composite Materials 1st International Conference on Materials, Energy and Environment, MEE’2020
Faculty of Exact Sciences, Department of Physics, University of Echahid Hama Lakhdar El Oued (El Oued, Algeria)
2019/10/22 Viscoelastic behaviour of Polymer-Matrix Composites Vth International Conference on Energy, Materials, Applied Energetics and Pollution, ICEMAEP’19
Laboratory of Applied Energetics and Pollution, Department of Mechanical Engineering, Mentouri Brothers University of Constantine (Constantine, Algeria)
2019/09 Stress-Relaxation Behaviour of 3D-printed polylactide 1st European Conference on Structural Integrity of Additively Manufactured Materials
European Structural Integrity Society, TC 15 (Structural Integrity of Additively Manufactured Componentes) (Trondheim, Norway)
2019/07 Stress Relaxation in Composites Subjected to Low Velocity Impact Loads 5th International Conference on Mechanics of Composites
Instituto Superior Técnico (Lisboa, Portugal)
2019/07 Effect of Curing Temperature on the Mechanical Properties of Aluminium Single Lap Bonded Joints 5th International Conference on Structural Adhesive Bonding,
Faculdade de Engenharia da Universidade do Porto (Porto, Portugal)
2018/12/17 Self-Reinforced Composites: An overview 2nd International Conference on Advanced Materials, Mechanics and Manufacturing, a3m 2018
Laboratory of Mechanics, Modeling and Manufacturing (LA2MP) of the National School of Engineers of Sfax (Hammamet, Tunisia)
2018/09 Multi-impact Response of Composite Sandwiches Incorporating Cork Cores 1st World Conference on Advanced Materials for Defense, AuxDefense 2018
Universidade do Minho (Lisboa , Portugal)
2018/08 Viscoelastic behaviour of Self-reinforced Polypropylene Composites under Bending Loads 22nd European Conference on Fracture
European Structural Integrity Society (Belgrade, Serbia)
2018/07 Viscoelastic behavior of Hybrid Laminates with Nano-enhanced Resin 26th International Conference on Composites or Nano Engineering
(Paris, France)
2017/04 Effect of Hostile Solutions on Composite Laminates Subjected to Impact Loads 8th International Conference on Composites Testing and Model Identification
Katholieke Universiteit Leuven (Leuven, Belgium)
2016/09 Fatigue Life of Single Lap Joints with Different Adhesives 11th European Adhesion Conference
The Institute of Materials Minerals and Mining (Glasgow, United Kingdom)
2016/02 Low-Cycle Fatigue of Single Lap Joints Involving Steel/Epoxy Systems 15th Portuguese Conference on Fracture,
Sociedade Port. de Materiais-Secção de Fratura (LisboA, Portugal)
2015/04 Composites Manufactured with Green Epoxy Resin and Tungsten Mine Wastes International Conference on Advanceds in Composite Materials and Structures,
Istanbul Technical University (ITU) (Istanbul, Turkey)
2015/04 Effect of the Erosive Wear promoted by Dusts on the Impact Strength of Composite laminates International Conference on Advanceds in Composite Materials and Structures,
Istanbul Technical University (Istanbul, Turkey)
2015/04 Effect of the Core’s Discontinuity on the Impact Strength of Composite Sandwiches International Conference on Advanceds in Composite Materials and Structures
Istanbul Techmical University ( ITU) (Istanbul, Turkey)
2014/09 Impact Response of Balsa Core Sandwiches First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues
Italian Group of Fracture (IGF) (Catania, Italy)
2014/09 Interlaminar Fracture in Woven Carbon/epoxy Laminates First Multi-Lateral Workshop on “Fracture and Structural Integrity related Issues
Italian Group of Fracture (IGF) (Catania, Italy)
2014/02 Fiber Optic Sensors to Health Monitoring of CFRC Laminates 14th Portuguese Conference on Fracture
Sociedade Port. de Materiais-Secção de Fratura (Régua, Portugal)
2014/02 Fatigue behaviour of Adhesively-bonded Steel Lap Joints under Variable Frequency 14th Portuguese Conference on Fracture
Sociedade Portuguesa de Materiais-Secção de Fratura (Régua, Portugal)
2014/01 Effect of Corrosive Solutions on CFRP Laminates Evaluated by Optical Fibers 15th Conference on Optical Fibers and Their Applications
Bialystok University (Bialystok-Lipowy Most, Poland)
2013/06 Mechanical Properties of Fibre-Metal Laminates 17th International Conference on Composite Structures
Faculdade de Engenharia da Universidade do Porto (Porto, Portugal)
2013/06 The Effect of Hostile Environments in Composite Materials 17th International Conference on Composite Structures
Faculdade de Engenharia da Universidade do Porto (Porto, Portugal)
2012/06/27 High Strength Steels and Composite Materials for Automotive Industry IV International Conference on Transport Problems
Faculty of Transport, Silesian University of Technology ( Katowice, Poland)
2012/06 Repeated Impact on Glass Fiber/Epoxy Laminates Damaged IV International Conference on Transport Problems,
Faculty of Transport, Silesian University of Technology, Katowice ( Katowice, Poland)
2012/05 Analysis of the Mechanical Properties of Nanofilled Epoxy Composites XVII International Conference on Mechanics of Composite Materials, realizada em
Instituto of Polymer Mechanics, University of Latvia (Riga, Latvia)
2012/02 Fatigue Performance of Kevlar/Epoxy Composites with Cork Filled Matrix 13th Portuguese Conference on Fracture
Sociedade Portuguesa de Materiais-Secção de Fratura (Coimbra, Portugal)
2011/06 Fracture Toughness and Water Uptake of Enhanced Nanofilled Epoxy Composites 16th International Conference on Composite Structures
Faculdade de Engenharia da Universidade do Porto (Porto, Portugal)
2011/06 Mechanical Properties of Composite Laminates after Impact Loads: Determination by Resonant Techniques 16th International Conference on Composite Structures
Faculdade de Engenharia da Universidade do Porto (Porto, Portugal)
2011/03 Impact Response of Kevlar Composites with Nanoclay Enhanced Epoxy Matrix Second International Conference on Multifuncional, Hybrid and Nanomaterials
(Strasbourg, France)
2010/06 Toughness and Fatigue Analysis of Polypropylene Nanoclayed Composites 14th European Conference on Compoite Materials
European Society for Composite Materials (Budapest, Hungary)
2009/07 Analysis of the Initial Delamination Size on the Mode I Interlaminar Fracture of Carbon/Epoxy Composites 17th International Conference on Composite Materials - ICCM 17, Edinburgh-Escócia,
Internetional Committee on Composite Materials (Edinburgh, United Kingdom)
2008/09 A Study of the Mode I and Mode II Interlaminar Fracture of Carbon/Epoxy Bi-directional Composites 17th European Conference on Fracture
European Structural Integrity Society (Brno-República , Czech Republic)
2008/09 Influence of Superposition Length on Static Strength of Single Lap Adhesive Joints with Dissimilar Adherents 11th Euro-Japonese Symposium
(Porto, Portugal)
2008/09 A Study of the Strength and Toughness on Cork Powder Filled Polyester 11th Euro-Japonese Symposium
Faculdade de Engenharia da Universidade do Porto (Porto, Portugal)
2007/09 Study of the Residual Stiffness on a Carbon/Epoxy Laminate Composite with Delaminated Interlayer Fourth International Conference on Fatigue of Composites
(Kaiserslautern, Germany)
2006/05 Fatigue Life Evaluation in a Carbon/Epoxy Laminate Composite Under Variable Block Loading 9th International Fatigue Congress
(Atlanta, United States)
2006/02 The Stress Ratio Effect on The Fatigue Life of Carbon/Epoxy Laminate Composites 10as Jornadas de Fratura
Sociedade Portuguesa de Materiais - Secção Técnica de Fratura (Guimarães, Portugal)
2005/03 Stacking Laminate Effects on Adhsive Lap Joints Strenght 11th International Conference on Fracture
International Conference on Fracture (Turim, Italy)
2004/05 Fatigue Behaviour of Natural Fibber Core Sandwich Laminates Subjected to Bending Loading 11th European Conference on Compoite Materials
European Society for Composite Materials (Rhodes, Greece)
2004/02 Fatigue Analysis of Natural Fibbers Core Sandwich Laminates 9as Jornadas de Fratura
Sociedade Portuguesa de Materiais-Secção de Fratura (Setubal, Portugal)
2003/10 Influência do Comprimento de Colagem na Resistência Mecânica de Juntas Sobrepostas Simples VI Congresso Iberoamericano de Engenharia Mecânica
Departamento de Engenharia Mecânica, Universidade de Coimbra (Coimbra, Portugal)
2001/04 Creep Behaviour of PP/Glass-Fibre Composite Adhesive Lap Joints 10th Meeting of the Portuguese Materials Society and 1st International Materials Symposium
Sociedade Portuguesa de Materiais (Coimbra, Portugal)
2000/11 Fatigue of Thermoplastic Composites Adhesive Lap Joints Euromat 2000
SF2M: Société Française de Métallurgie et de Matériaux (Tours, France)
2000/02 Comportamento Mecânico de Ligações Coladas em PP Reforçado com Fibra de Vidro 7as Jornadas de Fratura
Sociedade Portuguesa de Materiais-Secção de Fratura (Covilhã, Portugal)
1999/11 Análise de Danos por Métodos não Destrutivos em Compósitos Termoplásticos Reforçados com Fibras de Vidro IV Congresso Ibero-Americano de Engenharia Mecânica
Departamento de Ingenieria Mecanica, Universidad de Santiago de Chile (Santiago, Chile)
1998/09 Fatigue Damage in a Glass Fibre Reinforced Polypropylene Composite Fourth Seminar on Experimental Techniques and Design in Composite Materials
Structural Integrity Research Institute Advanced Railway Research Centre, University of Sheffield (Sheffield, United Kingdom)
1998/02 Fadiga a Deslocamento Controlado em Compósitos Termoplásticos 6as Jornadas de Fratura
Sociedade Portuguesa de Materiais-Secção de Fratura (Porto, Portugal)
1997/09 Comportamento Estático de um Compósito GFR/Polipropileno III Congresso Iberoamericano de Engenharia Mecânica
Instituto Politécnico José Antonio Echeverria (Havana, Cuba)
1995/12 Caracterização à Fluência do Titânio Grade 2 II Congresso Ibero-Americano de Engenharia Mecânica
Associação Brasileira de Engenharia e Ciências Mecânicas (Belo Horizonte, Brazil)
1994/04 Comportamento à Fadiga do Titânio Grade 2 5as Jornadas de Fratura
Sociedade Portuguesa de Materiais - Secção Técnica de Fratura (Lisboa, Portugal)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2019/09 - Current Caracterização Mecânica de Compósitos Reforçados com Grafeno
Supervisor
 Engenharia Mecânica (PhD)
Universidade da Beira Interior, Portugal
2019/09 - Current Caracterização Mecânico de Compósitos obtidos por FDM (Fused Deposition Modelling)
Supervisor
 Engenharia Mecânica (PhD)
Universidade da Beira Interior, Portugal
2019/09 - Current Materials for horizontal axis wind turbine blades and study of their performances
Co-supervisor
 Engenharia Mecânica (PhD)
Université 8 Mai 1945 Guelma, Algeria
2017/09 - Current Melhoria da Resistência ao Impacto em Compósitos de Fibra com Resina Nano-reforçada
Co-supervisor
 Engenharia Mecânica (PhD)
Universidade da Beira Interior, Portugal
2017/09 - Current Caracterização Mecânica de Juntas Coladas em T
Co-supervisor
 Engenharia Mecânica (PhD)
Universidade da Beira Interior, Portugal
2019/09 - 2020/03 Mechanical characterization of bio-composites reinforced with alfa fibres (Orientação dos trabalhos experimentais que conduziram à caracterização mecânica das fibras. Estes trabalhos decorreram no DEM/UBI com financiamento da Mohamed Boudiaf University, M'sila - Argélia(
Co-supervisor
 Mechanical Engineering (PhD)
Mohamed Boudiaf University, Algeria
2017/10 - 2018/07 Composite Panels Subjected to Multi-impacts at Different Energy Levels
Co-supervisor
 Engenharia Mecânica - Especialidade de Produção e Projeto (Master)
Universidade de Coimbra, Portugal
2016/10 - 2017/11 Resistência ao Impacto de Placas Curvas
Supervisor
 Engenharia Electromecânica (Master)
Universidade da Beira Interior, Portugal
2015/10 - 2016/11 Effect of the Distance between Impact Point and Hole Position and Non-perpendicular Holes on the Impact Strength of Composite Laminates
Supervisor
 Engenharia Aeronáutica (Master)
Universidade da Beira Interior, Portugal
2015/10 - 2016/11 Resistência ao Impacto de Juntas Coladas
Supervisor
 Engenharia Aeronáutica (Master)
Universidade da Beira Interior, Portugal
2015/10 - 2016/11 Efeito da Geometria de Reparação na Resistência ao Impacto de Compósitos Laminados
Supervisor
 Engenharia Aeronáutica (Master)
Universidade da Beira Interior, Portugal
2015/10 - 2016/10 Resistência ao Impacto de Laminados com Múltiplos Furos
Supervisor
 Engenharia Eletromecânica (Master)
Universidade da Beira Interior, Portugal
2015/10 - 2016/07 Resposta ao Impacto Longitudinal e Transversal de Laminados de Vidro/epóxi
Co-supervisor
 Engenharia Mecânica - Especialidade de Produção e Projeto (Master)
Universidade de Coimbra, Portugal
2013/10 - 2014/11 A Relação entre Fatores Socioeconómicos e Demográficos na Produção de Resíduos Sólidos Urbanos
Supervisor
 Engenharia e Gestão Industrial (Master)
Universidade da Beira Interior, Portugal
2011/09 - 2014/10 Eco-Inovação na Indústria Transformadora Portuguesa: Fatores Impulsionador Provas: 27/10/2014
Co-supervisor
 Engenharia da Produção e Gestão Industrial (PhD)
Universidade da Beira Interior, Portugal
2014/03 - 2014/08 Estudio de Comportamiento Mecánico de Composites Poliméricos Mezclados con Desechos de Tungsteno y la Reutilización de éstos para su Aplicación en el Campo de la Recuperación y/o Restauración de Viviendas
Supervisor
 Ingeniería de la Construcción (Degree)
Universidad de Córdoba, Spain
2013/10 - 2014/07 O Burel, enquanto Matéria de Design: Conceção de um Produto Lúdico Multifuncional para Utilização Infantil
Co-supervisor
 Design Industrial e Tecnológico (Master)
Universidade da Beira Interior, Portugal
2012/10 - 2013/11 Estudo da Degradação das Propriedades Mecânicas de Materiais Compósitos pelo Efeito da Esterilização por Autoclave
Supervisor
 Ciências Biomédicas (Master)
Universidade da Beira Interior, Portugal
2012/10 - 2013/11 Sustentabilidade no Setor dos Transportes
Supervisor
 Engenharia e Gestão Industrial (Master)
Universidade da Beira Interior, Portugal
2012/10 - 2013/09 Estudo da Influência do Meio Ambiente na Resistência ao Impacto de Compósitos Laminados
Co-supervisor
 Engenharia Mecânica - Especialidade de Produção e Projeto (Master)
Universidade da Beira Interior, Portugal
2012/10 - 2013/07 Resposta ao Impacto de Painéis Sanduíche Compósitos
Supervisor
 Engenharia Eletromecânica (Master)
Universidade da Beira Interior, Portugal
2012/10 - 2013/07 Effect of Corrosive Solutions on Composite Laminates Subjected to Low Velocity Impact Loading
Supervisor
 Engenharia Eletromecânica (Master)
Universidade da Beira Interior, Portugal
2012/10 - 2013/07 Comportamento Mecânico de Juntas Coladas em Serviço
Supervisor
 Engenharia Mecânica - Ramo Automóvel (Master)
Universidade da Beira Interior, Portugal
2012/10 - 2013/03 Impacto de Baja Velocidad en Estructuras Sandwich
Supervisor
 Ingeniería Aeroespacial (Degree)
Universidad de León, Spain
2012/10 - 2013/03 Estudio del Comportamiento de la Fibra de Carbono Reforzada en un Ambiente de Shock Térmico
Supervisor
 Ingeniería Aeroespacial (Degree)
Universidad de León, Spain
2012/02 - 2013/02 Resistência ao Impacto de Laminados Previamente Sujeitos a Cargas de Flexão
Co-supervisor
 Engenharia Mecânica - Especialidade de Produção e Projeto (Master)
Universidade de Coimbra, Portugal
2011/10 - 2012/11 Estudo dos Efeitos Ambientais no Comportamento Mecânico de Materiais Compósitos
Supervisor
 Engenharia Eletromecânica (Master)
Universidade da Beira Interior, Portugal
2012/02 - 2012/08 Mejora de las Propiedades al Impacto en Laminados de Fibra de Vidrio con Resina Epoxy Nanoreforzada Expuestos a Fuego
Supervisor
 Ingeniería Aeroespacial (Degree)
Universidad de León, Spain
2011/09 - 2012/02 Mejora de las Propiedades al Impacto en Laminados de Fibra de Carbono con Resina Epoxy Nanoreforzada sometidos a Degradación
Supervisor
 Ingeniería Aeroespacial (Degree)
Universidad de León, Spain
2011/09 - 2012/02 Ensayos de Impacto en Materiales Compuestos
Supervisor
 Ingeniería Aeronáutica (Degree)
Universitat Politècnica de València, Spain
2010/10 - 2011/04 Materials for Automotive Industry
Supervisor
Gheorghe Asachi’ Technical University of Iasi, Romania
2010/01 - 2010/12 Development in Geopolymers Systems-Mechanical Properties (Orientação dos trabalhos experimentais que conduziram à caracterização mecânica de um geopolimero a alta temperatura. Estes trabalhos foram realizados no DEM/UBI ao abrigo do programa ERASMUS)
Co-supervisor
 Material Sciences (PhD)
Technická univerzita v Liberci, Czech Republic
2009/10 - 2010/11 Resistência ao Impacto de Compósitos Híbridos
Supervisor
 Engenharia Mecânica - Ramo Automóvel (Master)
Universidade da Beira Interior, Portugal
2008/10 - 2009/09 Melhoria do Desempenho de Elementos Estruturais em Carroçarias de Autocarros
Supervisor
 Engenharia Mecânica - Ramo Automóvel (Master)
Universidade da Beira Interior, Portugal
2008/10 - 2009/09 Obtenção de Substratos Têxteis com Propriedades Térmicas e Ignífugas
Co-supervisor
 Engenharia Têxtil - Ramo Desenvolvimento do Produto (Master)
Universidade da Beira Interior, Portugal
2008/10 - 2009/07 Desenvolvimento e Aplicação de Compósitos ao Design de Mobiliário
Supervisor
 Design Industrial Tecnológico (Master)
Universidade da Beira Interior, Portugal
2007/10 - 2008/10 Juntas Coladas Aplicadas ao Design de Mobiliário
Supervisor
 Design Industrial Tecnológico (Master)
Universidade da Beira Interior, Portugal
2007/10 - 2008/10 Melhoria da Resistência ao Impacto em Painéis de Autocarros
Supervisor
 Engenharia Eletromecânica (Master)
Universidade da Beira Interior, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2020/11/01 - 2020/11/04 7th Global Conf. on Polymer and Composite Materials - PCM 2020 (2020/11/01 - 2020/11/04)
Conference (Member of the Scientific Committee)
 Bosen Academic Conferences, Hong Kong SAR China
2020/10/11 - 2020/10/13 5th International Conference on Mechatronics and Electrical Systems - ICMES 2020 (2020/10/11 - 2020/10/13)
Conference (Other)
2020/09/22 - 2020/09/24 5th International Conference on Design, Materials and Manufacturing - ICDMM 2020 (2020/09/22 - 2020/09/24)
Conference (Other)
 University Liverpool , United Kingdom
2020/09/01 - 2020/09/02 Euro Materials Science Congress 2020 (2020/09/01 - 2020/09/02)
Conference (Member of the Organising Committee)
 Diae Center, France
2020/05/04 - 2020/05/05 2nd Global Congress on Advanced Composite Materials: Investigating the Advancements of Advanced Composite Materials (2020/05/04 - 2020/05/05)
Conference (Member of the Organising Committee)
 Scientific Federation, United States
2020/01/20 - 2020/01/21 First International Conference on Materials, Energy and Environment - MEE’2020 (2020/01/20 - 2020/01/21)
Conference (Member of the Scientific Committee)
 Echahid Hamma Lakhdar University of El-OLued, Faculty of Exact Physics, Algeria
2020/01/16 - 2020/01/16 1st Virtual Conference on Structural Integrity (2020/01/16 - 2020/01/16)
Conference (Member of the Organising Committee)
 Organização conjunta entre a SPFIE, IGF, DIVK e ESIS, Portugal
2019/11/27 - 2019/11/29 ICEUBI2019 - International Congress on Engineering (2019/11/27 - 2019/11/29)
Conference (Member of the Scientific Committee)
 Universidade da Beira Interior, Portugal
2019/10/11 - 2019/10/13 4th International Conference on Mechatronics and Electrical Systems - ICMES 2019 (2019/10/11 - 2019/10/13)
Conference (Other)
2019/07/08 - 2019/07/11 6th Global Conf. on Polymer and Composite Materials - PCM 2019 (2019/07/08 - 2019/07/11)
Conference (Member of the Scientific Committee)
 Bosen Academic Conferences, Hong Kong SAR China
2018/12/17 - 2018/12/19 2nd International Conference on Advanced Materials, Mechanics and Manufacturing - a3m 2018 (2018/12/17 - 2018/12/19)
Conference (Member of the Scientific Committee)
 Laboratory of Mechanics, Modeling and Manufacturing (LA2MP), National School of Engineers of Sfax, Tunisia
2018/10/12 - 2018/10/14 3rd International Conference on Mechatronics and Electrical Systems - ICMES 2018 (2018/10/12 - 2018/10/14)
Conference (Other)
2018/09/05 - 2018/09/07 XIX International Colloquium on Mechanical Fatigue of Metals - ICMFM XIX (2018/09/05 - 2018/09/07)
Conference (Member of the Scientific Committee)
 Universidade do Porto Faculdade de Engenharia, Portugal
2018/05/18 - 2018/05/20 4th Annual International Workshop on Materials Science and Engineering - IWMSE 2018 (2018/05/18 - 2018/05/20)
Conference (Other)
2018/04/23 - 2018/04/24 XVI Portuguese Conference on Fracture-PCF 2018 (2018/04/23 - 2018/04/24)
Conference (President of the Organising Committee)
 Sociedade Portuguesa de Materiais, Portugal
2018/04/10 - 2018/04/13 5th Global Conference on Polymer and Composite Materials-PCM 2018 (2018/04/10 - 2018/04/13)
Conference (Member of the Scientific Committee)
 Bosen Academic Conferences, Hong Kong SAR China
2017/12/22 - 2017/12/25 2nd International Conference on Mechatronics and Electrical Systems - ICMES 2017 (2017/12/22 - 2017/12/25)
Conference
2017/12/15 - 2017/12/17 5th International Conference on Mechanics and Mechatronics - ICMM2017 (2017/12/15 - 2017/12/17)
Conference (Other)
2017/12/05 - 2017/12/07 ICEUBI2017 - International Congress on Engineering (2017/12/05 - 2017/12/07)
Conference (Member of the Scientific Committee)
 Universidade da Beira Interior, Portugal
2017/11/08 - 2017/11/08 Dia Mundial dos Materiais 2017 (2017/11/08 - 2017/11/08)
Conference (Member of the Organising Committee)
 Sociedade Portuguesa de Materiais, Portugal
2017/09/08 - 2017/09/10 3rd Annual International Workshop on Materials Science and Engineering-IWMSE 2017 (2017/09/08 - 2017/09/10)
Conference (Other)
2017/05/23 - 2017/05/25 4th Global Conference on Polymer and Composite Materials - PCM 2017 (2017/05/23 - 2017/05/25)
Conference (Member of the Scientific Committee)
 Bosen Academic Conferences, Hong Kong SAR China
2017/04/21 - 2017/04/23 2017 International Conference on Mechanics, Civil Engineering and Building Material - MCEBM 2017 (2017/04/21 - 2017/04/23)
2016/09/29 - 2016/09/30 V Encontro Nacional de Estudantes de Materiais-ENEM 2016 (2016/09/29 - 2016/09/30)
Conference (Member of the Organising Committee)
 Sociedade Portuguesa de Materiais, Portugal
2016/05/20 - 2016/05/23 3rd Global Conference on Polymer and Composite Materials - PCM 2016 (2016/05/20 - 2016/05/23)
Conference (Member of the Scientific Committee)
 Bosen Academic Conferences, Hong Kong SAR China
2016/02/10 - 2016/02/12 XV Portuguese Conference on Fracture - PCF 2016 (2016/02/10 - 2016/02/12)
Conference (Member of the Scientific Committee)
 Sociedade Portuguesa de Materiais, Portugal
2015/12/02 - 2015/12/04 ICEUBI2015-International Conference on Engineering: Engineering for Society (2015/12/02 - 2015/12/04)
Conference (Member of the Scientific Committee)
 Universidade da Beira Interior, Portugal
2015/11/21 - 2015/11/22 MEEP2015 – Int. Conference on Materials Chemistry and Environmental Protection (2015/11/21 - 2015/11/22)
Conference (Other)
2015/08/07 - 2015/08/09 IWMSE 2015 - International Workshop on Materials Science and Engineering (2015/08/07 - 2015/08/09)
Conference (Other)
2014/10/20 - 2014/10/23 3rd Global Conference on Materials Science and Engineering - CMSE 2014 (2014/10/20 - 2014/10/23)
Conference (Other)
 Wuhan Advanced Materials Society, China
2014/05/21 - 2014/05/21 Encontro Bienal das Divisões Técnicas da SPM (2014/05/21 - 2014/05/21)
Conference (Member of the Organising Committee)
 Sociedade Portuguesa de Materiais, Portugal
2014/02/06 - 2014/02/07 XIV Portuguese Conference on Fracture-PCF 2014 (2014/02/06 - 2014/02/07)
Conference (Member of the Scientific Committee)
 Sociedade Portuguesa de Materiais, Portugal
2013/11/27 - 2013/11/29 ICEUBI2013 - International Conference on Engineering UBI2013 - Engineering for Economic Development (2013/11/27 - 2013/11/29)
Conference (Member of the Organising Committee)
 Universidade da Beira Interior, Portugal
2013/11/27 - 2013/11/29 ICEUBI2013 - International Conference on Engineering UBI2013 - Engineering for Economic Development (2013/11/27 - 2013/11/29)
Conference (Member of the Scientific Committee)
 Universidade da Beira Interior, Portugal
2013/11/20 - 2013/11/22 2nd Global Conference on Materials Science and Engineering - CMSE 2013 (2013/11/20 - 2013/11/22)
Conference (Other)
 Wuhan Advanced Materials Society, China
2011/11/28 - 2011/11/30 ICEUBI2011 - International Conference on Engineering UBI2011-Innovation & Development (2011/11/28 - 2011/11/30)
Conference (Member of the Scientific Committee)
 Universidade da Beira Interior, Portugal
2009/11/25 - 2009/11/27 Engenharia’2009 - Inovação & Desenvolvimento (2009/11/25 - 2009/11/27)
Conference (Member of the Scientific Committee)
 Universidade da Beira Interior, Portugal
2007/11/21 - 2007/11/23 Engenharias’07 - Inovação & Desenvolvimento (2007/11/21 - 2007/11/23)
Conference (Member of the Scientific Committee)
 Universidade da Beira Interior, Portugal

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2021/12/15 Efeito de sobrecargas no comportamento viscoelástico de um compósito GFRP
Supervisor
 Nuno Miguel Gonçalves Almeida (Master)
Universidade de Coimbra, Portugal
2021/11/25 Efeito do Tempo de Imersão em Ambiente Salino na Resposta à Fadiga de Laminados Vidro/epóxido
(Thesis) Main arguer
 David Manuel de Campos Aguiar (Master)
Universidade de Coimbra, Portugal
2021/11/24 Fadiga fretting em laminados compósitos de aramida
Supervisor
 Corneliu Chitanu (Master)
Universidade da Beira Interior, Portugal
2021/11/08 Estudo Experimental e Numérico de juntas T Adesivas pela Técnica Bi-adesivo
(Thesis) Main arguer
 Pedro Miguel Dias de Carvalho (Master)
Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2021/07/20 Desenvolvimento e impressão 3D de estruturas poliméricas com coeficiente de Poisson unitário
President of the jury
 - Joana Almeida Silva (Master)
Universidade de Coimbra, Portugal
2021/01/15 Mechanical Performance Optimization of Bonded Composite Patch Repairs: A Flexural Analysis
Supervisor
 Francisca Sá Ferreira (Master)
Universidade da Beira Interior, Portugal
2021/01/13 Reparação de Painéis Curvos Em Materiais Compósitos Para Aplicações Aeronáuticas
Supervisor
 Patrícia Melo Freire Silvestre (Master)
Universidade da Beira Interior, Portugal
2020/07/24 Design and Characterization of an Adhesive for T-Joint Composite
(Thesis) Main arguer
 Hugo Micael Santos Valente (Master)
Universidade da Beira Interior, Portugal
2019/10/18 Theoretical and Finite Element Approaches to Model the Phenomenon of High Velocity Impact on GFRP Plates
Thesis Member
 Luis Alonso San José (PhD)
Universidad Carlos III de Madrid - Campus de Leganés, Spain
2019/07/23 Manufacture and characterization of epoxy composites doped with Fe3O4 and SiO2 particles
(Thesis) Main arguer
 Jose Francisco Molina García (Master)
Universidade da Beira Interior, Portugal
2019/07/22 Efeito de Ambientes Hostis na Resposta â Fadiga de laminados Vidro/Epóxido
(Thesis) Main arguer
 Catarina Raquel dos Santos Gonçalves (Master)
Universidade de Coimbra, Portugal
2019/07/22 Uso de Soldadura por Fricção Linear para Otimmizar a Resistência Mecânica de Juntas Coladas Sobrepostas
(Thesis) Main arguer
 Guilherme Roberto Cristão Correia (Master)
Universidade de Coimbra, Portugal
2018/12/03 Desenvolvimento e Maquinagem em Compósito com Fibra Curta de Carbono.
(Thesis) Main arguer
 Sérgio Espele de Oliveira (PhD)
Universidade de Coimbra, Portugal
2018/11/26 Sandwich for Aeronatical applications: Mechanical and Electrical Characterization
(Thesis) Main arguer
 Nuno Neves de Sousa (Master)
Universidade da Beira Interior, Portugal
2018/09/24 Effect of the Electric Current on the Viscoelastic Behavior of CFRP
(Thesis) Main arguer
 João Alfredo Martins Saraiva (Master)
Universidade de Coimbra, Portugal
2018/07/26 Composite Panels Subjected to Multi-impacts at Different Energy
Thesis Member
 João Miguel Ramalheiro Martins Barata Duarte (Master)
Universidade de Coimbra, Portugal
2018/07/24 Projeto e Desenvolvimento de Compósitos de Matriz Cerâmica para Aplicações em Aeronáutica
(Thesis) Main arguer
 André Dias Araújo (Master)
Universidade da Beira Interior, Portugal
2018/07/06 Efeito da Orientação das Fibras no Comportamento Viscoelástico de GFRP sujeitos a Ambientes Hostis
(Thesis) Main arguer
 Miguel Ângelo Correia Barbosa (Master)
Universidade de Coimbra, Portugal
2018/06/22 Effect of Hostile Environments on the Fatigue Behaviour of Carbon/epoxy Laminates
(Thesis) Main arguer
 João Ponte da Silva (Master)
Universidade de Coimbra, Portugal
2018/02/27 Análise da Resposta ao Impacto de Compósitos Fabricados por Sobremoldação
(Thesis) Main arguer
 Duarte Nuno de Castro Soares e Sousa (Master)
Universidade de Coimbra, Portugal
2017/11/07 Resistência ao Impacto de Placas Curvas
Supervisor
 Pedro Miguel Bernardino Sousa (Master)
Universidade da Beira Interior, Portugal
2017/09/29 Estudo do Efeito da Percentagem de Fibra na Resistência à Fadiga de Compósitos de Fibra Curta Carbono/epóxi
(Thesis) Main arguer
 Daniel Afonso Lourenço Correia (Master)
Universidade de Coimbra, Portugal
2017/09/26 Melhoria da Resistência Mecânica de Juntas Coladas Sobrepostas Simples com Recurso à Soldadura por Fricção Linear
(Thesis) Main arguer
 Hélder Manuel Domingues Rumor (Master)
Universidade de Coimbra, Portugal
2017/04/12 Comportamento Mecânico da Madeira sob Solicitações de Modo Misto.
(Thesis) Arguer
 Jorge Marcelo Quintas de Oliveira (PhD)
Universidade da Beira Interior, Portugal
2017/01/05 Fire Reaction Behaviour of Fibre Reinforced Composite Materials.
(Thesis) Arguer
 Marta Sofia dos Santos Martins, (PhD)
Universidade do Porto, Portugal
2016/11/04 Effect of the Distance between Impact Point and Hole Position and Non-perpendicular Holes on the Impact Strength of Composite Laminates,
Supervisor
 Rafael Alexandre Mota dos Santos (Master)
Universidade da Beira Interior, Portugal
2016/11/04 Resistência ao Impacto de Juntas Coladas
Supervisor
 Hugo Davide Góis (Master)
Universidade da Beira Interior, Portugal
2016/11/04 Efeito da Geometria de Reparação na Resistência ao Impacto de Compósitos Laminados
Supervisor
 Sara Rita de Macedo Coelho (Master)
Universidade da Beira Interior, Portugal
2016/10/28 Resistência ao Impacto de Laminados com Múltiplos Furos
Supervisor
 Joel Rabaço Alves (Master)
Universidade da Beira Interior, Portugal
2016/09/19 Estudo da Influência do Efeito de Meios Corrosivos na Resistência ao Impacto de Laminados Vidro/epóxi
(Thesis) Main arguer
 Ana Rita da Silva Rodrigues (Master)
Universidade de Coimbra, Portugal
2016/09/08 The Flexural Properties of Corrugated Hybrid Composite Plates
(Thesis) Main arguer
 Francisco Manuel Gonçalves Mesquita (Master)
Universidade de Coimbra, Portugal
2016/07/27 Manutenção das Automotoras UTE 2240 EMEF
(Thesis) Main arguer
 Hugo Alexandre Vital Costa Marques (Master)
Instituto Politécnico de Tomar Escola Superior de Tecnologia de Abrantes, Portugal
2016/07/22 Efeito das Soluções Cimentícias na Resposta ao Impacto Longitudinal e Transversal de Laminados Vidro/Epóxido
(Thesis) Main arguer
 André Filipe Simões Leonardo (Master)
Universidade de Coimbra, Portugal
2016/02/19 Reparação de Delaminações em Compósitos Laminados através de um Parafuso
(Thesis) Main arguer
 André Simões da Costa (Master)
Universidade de Coimbra, Portugal
2015/11/13 Projeto e Caracterização de Composições Cerâmicas com Resíduos Refratários Industriais
(Thesis) Main arguer
 José Miguel Neto Alvares Nunes (Master)
Universidade da Beira Interior, Portugal
2015/10/30 Aplicação de Fibras Óticas para Avaliar as Alterações de Temperatura em Compósitos Laminados
(Thesis) Arguer
 Jorge Daniel dos Santos Rato (Master)
Universidade da Beira Interior, Portugal
2015/09/22 Degradação Mecãnica em Compósitos de Vidro/Epóxido Sujeitos a Soluções Cimentícias
(Thesis) Main arguer
 Renato Resende Moreira Baptista Carvalho (Master)
Universidade de Coimbra, Portugal
2015/09/22 Efeito das Soluções Cimentícias na Resposta ao Impacto de Laminados Vidro/Epóxido
(Thesis) Main arguer
 Luis Fernando Teixeira Neves (Master)
Universidade de Coimbra, Portugal
2015/07/13 Comportamento mecânico de juntas coladas em serviço
Supervisor
 Jorge Ricardo Lima Soares (Master)
Universidade da Beira Interior, Portugal
2015/06/25 Projeto de Tese subordinado ao tema“ Utilização de Compósitos em Substituição de Ligas de Alumínio na Fabricação de Componentes Usinados”
(Thesis) Main arguer
 Sérgio Espele de Oliveira (Other)
Universidade de Coimbra, Portugal
2015/02/11 Análise do Efeito do “Taper” na Resistência de Juntas Coladas
(Thesis) Main arguer
 Hugo Filipe Oliveira Pinto Santos (Master)
Universidade de Coimbra, Portugal
2014/12/22 Comportamento Mecânico de Compósitos de Fibra de Vidro/Epoxy Nano-Reforçados
(Thesis) Main arguer
 Henrique Pereira da Silva, (PhD)
Universidade de Coimbra, Portugal
2014/11/25 Estudo do Comportamento da Resistência de um Laminado em Fibra de Carbono Submetido a Fadiga Térmica
(Thesis) Main arguer
 Nuno Tiago de Sousa Francisco (Master)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2014/11/13 Feasibillity of Applying Optical Sensors to Detect Fatigue Damage in Carbon Laminates
(Thesis) Main arguer
 Liliana Patrícia Vieira de Freitas (Master)
Universidade da Beira Interior, Portugal
2014/11/06 A Relação entre Fatores Socioeconómicos e Demográficos na Produção de Resíduos Sólidos Urbanos
Supervisor
 Inês Nascimento do Carmo (Master)
Universidade da Beira Interior, Portugal
2014/09/11 Estudo do Impacto Dinâmico em Compósitos Laminados Sujeitos a Ambientes Hostis
(Thesis) Main arguer
 Bruno Samuel Marques Dias (Master)
Universidade de Coimbra, Portugal
2014/07/08 O Efeito Abrasivo na Resistência ao Impacto de Materiais Compósitos
(Thesis) Main arguer
 José João Meira da Costa (Master)
Universidade de Coimbra, Portugal
2014/07/02 Estudo da Influência do Ângulo de Taper em Juntas Coladas
(Thesis) Main arguer
 Inês Filipa Cardoso Marques (Master)
Universidade de Coimbra, Portugal
2014/06/25 Estudo da Degradação de Materiais Compósitos Sujeitos a Descargas Elétricas
(Thesis) Main arguer
 Edgar Moreira Farto (Master)
Universidade de Coimbra, Portugal
2014/02/13 Caracterização Dinâmica de Espumas de Alumínio
(Thesis) Main arguer
 Luís Aires da Silva Inácio (Master)
Universidade de Coimbra, Portugal
2014/02/03 Resistência ao Impacto de Laminados Previamente Sujeitos a Cargas de Flexão
Thesis Member
 Gonçalo José Pedro Ferreira (Master)
Universidade de Coimbra, Portugal
2013/11/08 Sustentabilidade no Setor dos Transportes
Supervisor
 Joaquim Fernando Ribeiro Monteiro (Master)
Universidade da Beira Interior, Portugal
2013/11/07 Estudo da Degradação das Propriedades Mecânicas de Materiais Compósitos pelo Efeito da Esterilização por Autoclave
Supervisor
 Gonçalo Nuno Nogueira Elísio Serra (Master)
Universidade da Beira Interior, Portugal
2013/11/05 Monitorização da Integridade de Laminados de Carbono/epoxy com Sensores Óticos Embebidos
(Thesis) Main arguer
 Bruno Miguel Pires Marques (Master)
Universidade da Beira Interior, Portugal
2013/09/18 Estudo da Influência do Meio Ambiente na Resistência ao Impacto de Compósitos Laminados
Thesis Member
 Tomé Filipe de Carvalho Salomão Nogueira (Master)
Universidade de Coimbra, Portugal
2013/07/23 Avaliação da Influência do Meio Ambiente na Integridade Estrutural de Placas de Vidro/epóxi Submetidas a Impacto
(Thesis) Main arguer
 Ricardo Alberto dos Santos Reis (Master)
Universidade de Coimbra, Portugal
2013/07/16 Resposta ao Impacto de Painéis Sanduíche Compósitos
Supervisor
 Georgino Conceição Gonçalves Serra (Master)
Universidade da Beira Interior, Portugal
2013/07/16 Effect of Corrosive Solutions on Composite Laminates Subjected to Low Velocity Impact Loading
Supervisor
 Nurdane Mortas (Master)
Universidade da Beira Interior, Portugal
2012/09/30 Estudo dos Efeitos Ambientais no Comportamento Mecânico de Materiais Compósitos
Supervisor
 André António Rodrigues Campos (Master)
Universidade da Beira Interior, Portugal
2012/07/18 Estudo do Impacto a Baixa Velocidade em Compósitos Epóxi/Fibra de Vidro Nanoreforçados
(Thesis) Main arguer
 David Samuel da Costa Santos (Master)
Universidade de Coimbra, Portugal
2012/01/18 Comportamento Termomecânico de um Betão Refratário de 100% Alumina para Aplicações Monolíticas
(Thesis) Arguer
 Deesy Gomes Pinto (PhD)
Universidade da Beira Interior, Portugal
2011/07/21 Ação da Água no Comportamento Mecânico de Polímeros Nanoreforçados
(Thesis) Main arguer
 Ana Margarida dos Santos Pereira (Master)
Universidade de Coimbra, Portugal
2010/11/09 Resistência ao Impacto de Compósitos Híbridos
Supervisor
 Paulo Sérgio Pina dos Santos (Master)
Universidade da Beira Interior, Portugal
2010/03/01 Design Cerâmico-Guia de Apoio ao Desenvolvimento Sustentável do Setor
(Thesis) Main arguer
 David João Geraldes Camocho (Master)
Instituto de Artes Visuais, Design e Marketing, Portugal
2010/03/01 Desenvolvimento de uma Base de Dados de Eco-materiais - “SUSMATERIAIS” - Bioplásticos e Fibras Naturais como Reforço de Bio-compósitos
(Thesis) Main arguer
 Ana Cristina Mota Tinoco de Almeida (Master)
Instituto de Artes Visuais, Design e Marketing, Portugal
2010/03/01 Importância do Design e Metodologia Projetual para o Desenvolvimento de Projetos de Tratamento Acústico
(Thesis) Main arguer
 Filipa Margarida Luz Charais (Master)
Instituto de Artes Visuais, Design e Marketing, Portugal
2010/03/01 Projeto - A Bicicleta Hexacomb.
(Thesis) Main arguer
 Pedro Filipe Cabrita André (Master)
Instituto de Artes Visuais, Design e Marketing, Portugal
2009/09/29 Melhoria do Desempenho de Elementos Estruturais em Carroçarias de Autocarros
Supervisor
 João Bruno Proença Mendes (Master)
Universidade da Beira Interior, Portugal
2009/09/29 Obtenção de Substratos Têxteis com Propriedades Térmicas e Ignífugas
Thesis Member
 Hélia Marisa Mesquita Gaspar Dâmaso (Master)
Universidade da Beira Interior, Portugal
2009/09/18 Máquina de Análise e Correção de Deformações em Molas de Lâmina
(Thesis) Main arguer
 Filipe Emanuel Dias Azevedo Casimiro (Master)
Universidade da Beira Interior, Portugal
2009/07/20 Patrícia Alexandra Alípio da Silva sob o tema Desenvolvimento e Aplicação de Compósitos ao Design de Mobiliário
Supervisor
 Patrícia Alexandra Alípio da Silva (Master)
Universidade da Beira Interior, Portugal
2009/03/10 Tendência Emergente dos Bioplásticos
(Thesis) Main arguer
 Catarina Marques da Silva (Master)
Instituto de Artes Visuais, Design e Marketing, Portugal
2009/03/10 Redesign do Elevador de Transferência
(Thesis) Main arguer
 Ana Margarida Neves Paulo (Master)
Instituto de Artes Visuais, Design e Marketing, Portugal
2009/03/09 As Embalagens Alimentares no Âmbito dos Bioplásticos com Recurso à Biotecnologia
(Thesis) Main arguer
 Ana Sofia dos Santos Lança (Master)
Instituto de Artes Visuais, Design e Marketing, Portugal
2009/03/09 DOT.city, Soluções de Mobilidade Urbana
(Thesis) Main arguer
 João Luís Proença Silveira Amaral Gomes (Master)
Instituto de Artes Visuais, Design e Marketing, Portugal
2008/09/30 Melhoria da Resistência ao Impacto em Painéis de Autocarros
Supervisor
 Nuno Filipe Soares Rodrigues (Master)
Universidade da Beira Interior, Portugal
2008/09/29 Juntas Coladas Aplicadas ao Design de Mobiliário
Supervisor
 José Miguel Lopes Gateira (Master)
Universidade da Beira Interior, Portugal
2008/09/11 Obtenção de Substratos Têxteis com Propriedades Magnéticas
(Thesis) Main arguer
 Maria Isabel Gonçalves Guerreiro de Campos (Master)
Universidade da Beira Interior, Portugal
2007/11/08 Caracterização à Fadiga de Compósitos de Base Fenólica Reforçados com Fibra de Vidro.
(Thesis) Main arguer
 Paulo Manuel Oliveira Fael, (PhD)
Universidade da Beira Interior, Portugal
2007/03/01 Tese sob o tema Projecto à Fadiga de Camisas de Refrigeração de Ferro Fundido Usadas em Motores Diesel Sobrealimentados
(Thesis) Arguer
 Aurélio Rodrigues Ferreira Reis (PhD)
Universidade da Beira Interior, Portugal
2007/02/28 Provas Complementares sob o tema Estudo das Tensões e Deformações Introduzidas nas Montagens com Aperto em Cilindros Sujeitos a Pressão Interna e/ou Externa
(Thesis) Main arguer
 Aurélio Rodrigues Ferreira Reis (PhD)
Universidade da Beira Interior, Portugal
2006/05/02 Modelação Estatística da Composição Granulométrica de um Betão Refractário de Alumína Auto-Escoante sem Cimento
(Thesis) Main arguer
 Abílio Manuel Pereira da Silva (PhD)
Universidade da Beira Interior, Portugal
2005/12/16 Provas de Aptidão Pedagógica e Capacidade Científica “Produção de Material de Apoio Didáctico: Técnicas de Moldes e Moldação de Cerâmicos e Materiais Compósitos”
(Thesis) Main arguer
 Vasco Alexandre Santos (Other)
Instituto de Artes Visuais, Design e Marketing, Portugal
2005/12/15 Provas de Aptidão Pedagógica e Capacidade Científica “Planeamento de uma Unidade Didáctica Teórico-Prática: Técnicas de Moldes e Moldação de Cerâmicos e Materiais Compósitos”
(Thesis) Main arguer
 Vasco Alexandre Santos (Other)
Instituto de Artes Visuais, Design e Marketing, Portugal

Association member

Society Organization name Role
2017 - Current Associação Portuguesa de Fractura e Integridade Estrutural Treasurer
2017 - Current European Structural Integrity Society
2014 - Current Sociedade Portuguesa de Materiais
2011 - Current Associação Portuguesa de Adesão e Adesivos

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2022/02 - 2022/07 Mecânica Aplicada II Engenharia Mecânica (Licenciatura) Universidade de Coimbra, Portugal
2021/09 - 2022/01 Mecânica Aplicada I Engenharia Mecânica (Licenciatura) Universidade de Coimbra, Portugal
2021/09 - 2022/01 Comportamento Mecânico de Materiais Engenharia Mecânica (Mestrado integrado) Universidade de Coimbra, Portugal
2021/02 - 2021/07 Introdução ao Projecto Mecânico Ciências da Engenharia Mecânica (Mestrado) Universidade de Coimbra, Portugal
2020/09 - 2021/01 Mecânica Materiais Engenharia Electromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2020/09 - 2021/01 Fundament. Mecânica para EGI Engenharia e Gestão Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2020/09 - 2021/01 Tecnologias de Produção Engenharia e Gestão Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2020/02 - 2020/06 Materiais Engenharia e Gestão Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2020/02 - 2020/06 Processos de Fabrico Design Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2019/09 - 2020/01 Fundamentos de Mecânica para EGI Engenharia e Gestão Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2019/09 - 2020/01 Mecânica Materiais Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2019/02 - 2019/06 Materiais Engenharia e Gestão Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2019/02 - 2019/06 Processos de Fabrico Design Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2018/09 - 2019/01 Mecânica Materiais Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2018/02 - 2018/06 Mecânica dos Sólidos Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2018/02 - 2018/06 Mecânica dos Sólidos Engenharia Aeronáutica (Mestrado integrado) Universidade da Beira Interior, Portugal
2018/02 - 2018/06 Processos de Fabrico Design Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2017/09 - 2018/01 Mecânica Materiais Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2017/09 - 2018/01 Sistemas e Órgãos Mecânicos Engenharia Eletromecânica (Mestrado) Universidade da Beira Interior, Portugal
2017/09 - 2018/01 Corte e Conformação Engenharia Mecânica - Projeto e Produção Mecânica (Mestrado) Instituto Politécnico de Tomar Escola Superior de Tecnologia de Abrantes, Portugal
2017/09 - 2018/01 Materiais Compósitos Engenharia Mecânica - Projeto e Produção Mecânica (Mestrado) Instituto Politécnico de Tomar Escola Superior de Tecnologia de Abrantes, Portugal
2016/02 - 2016/06 Materiais de Construção Aeroespacial Engenharia Aeronáutica (Mestrado integrado) Universidade da Beira Interior, Portugal
2016/02 - 2016/06 Mecânica dos Sólidos Engenharia Aeronáutica (Mestrado integrado) Universidade da Beira Interior, Portugal
2016/02 - 2016/06 Processos de Fabrico Design Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2016/02 - 2016/06 Introdução ao Projeto Eletromecânico Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2015/09 - 2016/01 Órgãos de Máquinas 2015/16 Engenharia Eletromecânica (Mestrado) Universidade da Beira Interior, Portugal
2015/09 - 2016/01 Órgãos de Máquinas Engenharia Aeronáutica (Mestrado) Universidade da Beira Interior, Portugal
2015/02 - 2015/06 Processos de Fabrico Design Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2015/02 - 2015/06 Mecânica dos Sólidos Engenharia Aeronáutica (Mestrado integrado) Universidade da Beira Interior, Portugal
2015/02 - 2015/06 Introdução ao Projeto Eletromecânico Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2014/09 - 2015/01 Mecânica Materiais Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2014/09 - 2015/01 Tecnologias Fabricação Engenharia e Gestão Industrial (Mestrado) Universidade da Beira Interior, Portugal
2014/02 - 2014/06 Processos de Fabrico Design Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2014/02 - 2014/06 Introdução ao Projeto Eletromecânico Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2014/02 - 2014/06 Seleção de Materiais Engenharia e Gestão Industrial (Mestrado) Universidade da Beira Interior, Portugal
2013/09 - 2014/01 Mecânica Materiais Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2013/02 - 2013/06 Processos de Fabrico Design Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2013/02 - 2013/06 Introdução ao Projeto Eletromecânico Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2013/02 - 2013/06 Seleção de Materiais Design Industrial Tecnológico (Mestrado) Universidade da Beira Interior, Portugal
2012/09 - 2013/01 Mecânica Materiais Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2012/09 - 2013/01 Sistemas e Órgãos Mecânicos Engenharia Eletromecânica (Mestrado) Universidade da Beira Interior, Portugal
2012/02 - 2012/06 Processos de Fabrico Design Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2012/02 - 2012/06 Introdução ao Projeto Eletromecânico Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2011/09 - 2012/01 Mecânica Materiais Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2011 - 2012 Lecionou um módulo de cinco horas subordinado ao tema “A evolução dos materiais na perspetiva do Design” na unidade curricular de Seminários Técnicos Design de Produção (Mestrado) Escola Superior de Design, Portugal
2011/02 - 2011/06 Ciência dos Materiais Engenharia Aeronáutica (Licenciatura) Universidade da Beira Interior, Portugal
2011/02 - 2011/06 Introdução ao Projeto Eletromecânico Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2009/09 - 2010/01 Mecânica Materiais Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2009/09 - 2010/01 Tecnologias de Fabricação Design Industrial Tecnológico (Mestrado) Universidade da Beira Interior, Portugal
2009/09 - 2010/01 Sistemas e Órgãos Mecânicos Engenharia Eletromecânica (Mestrado) Universidade da Beira Interior, Portugal
2009/09 - 2010/01 Tecnologia dos Materiais Design do Equipamento (Licenciatura) Escola Universitária das Artes de Coimbra, Portugal
2009/02 - 2009/06 Processos de Fabrico Design Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2009/02 - 2009/06 Introdução ao Projeto Mecânico Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2009/02 - 2009/06 Introdução ao Projeto Eletromecânico Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2009/02 - 2009/06 Tecnologia dos Materiais II Design do Equipamento (Licenciatura) Escola Universitária das Artes de Coimbra, Portugal
2008/09 - 2009/01 Mecânica Materiais Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2008/09 - 2009/01 Desenho Técnico e CAD/CAM Engenharia Aeronáutica (Licenciatura) Universidade da Beira Interior, Portugal
2008/09 - 2009/01 Projeto I Design Industrial Tecnológico (Mestrado) Universidade da Beira Interior, Portugal
2008/09 - 2009/01 Sistemas e Órgãos Mecânicos Engenharia Eletromecânica (Mestrado) Universidade da Beira Interior, Portugal
2008/09 - 2009/01 Tecnologia dos Materiais Design do Equipamento (Licenciatura) Escola Universitária das Artes de Coimbra, Portugal
2008/02 - 2008/06 Introdução ao Projeto Mecânico Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2008/02 - 2008/06 Órgãos de Máquinas II Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2008/02 - 2008/06 Tecnologia dos Materiais II Design do Equipamento (Licenciatura) Escola Universitária das Artes de Coimbra, Portugal
2007/09 - 2008/06 Projeto Mecânico Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2007/09 - 2008/01 Mecânica Materiais Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2007/09 - 2008/01 Mecânica Materiais Engenharia Têxtil (Mestrado) Universidade da Beira Interior, Portugal
2007/09 - 2008/01 Tecnologias Fabricação Design Industrial Tecnológico (Mestrado) Universidade da Beira Interior, Portugal
2007/09 - 2008/01 Sistemas e Órgãos Mecânicos Engenharia Eletromecânica (Mestrado) Universidade da Beira Interior, Portugal
2007/09 - 2008/01 Tecnologia dos Materiais I Design do Equipamento (Licenciatura) Escola Universitária das Artes de Coimbra, Portugal
2007/09 - 2008/01 Lecionou um módulo de cinco horas subordinado ao tema “Vantagens técnicas e económicas dos Novos Materiais” na Unidade Curricular de Economia da Inovação Economia da Inovação e Empreendedorismo (Mestrado) Universidade do Algarve - Campus de Gambelas, Portugal
2007/02 - 2007/06 Mecânica dos Sólidos Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2007/02 - 2007/06 Mecânica dos Sólidos Engenharia Aeronáutica (Licenciatura) Universidade da Beira Interior, Portugal
2007/02 - 2007/06 Mecânica dos Sólidos Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2007/02 - 2007/06 Órgãos de Máquinas II Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2006/09 - 2007/06 Projeto Mecânico Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2006/09 - 2007/06 Tecnologia dos Materiais Design do Equipamento (Licenciatura) Escola Universitária das Artes de Coimbra, Portugal
2006/09 - 2007/01 Mecânica Materiais Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2006/09 - 2007/01 Órgãos de Máquinas Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2006/09 - 2007/01 Órgãos de Máquinas I Engenharia Aeronáutica (Licenciatura) Universidade da Beira Interior, Portugal
2006/02 - 2006/06 Desenho e Sistemas Gráficos Engenharia Informática (Licenciatura) Universidade da Beira Interior, Portugal
2006/02 - 2006/06 Órgãos de Máquinas II Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2005/09 - 2006/06 Projeto Mecânico Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2005/09 - 2006/06 Tecnologia dos Materiais Design do Equipamento (Licenciatura) Escola Universitária das Artes de Coimbra, Portugal
2005/09 - 2006/01 Órgãos de Máquinas Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2005/09 - 2006/01 Órgãos de Máquinas I Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2005/02 - 2005/06 Desenho e Sistemas Gráficos Engenharia Informática (Licenciatura) Universidade da Beira Interior, Portugal
2005/02 - 2005/06 Ciência e Tecnologia de Materiais Design (Licenciatura) Instituto de Artes Visuais, Design e Marketing, Portugal
2004/09 - 2005/06 Projeto Mecânico Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2004/09 - 2005/01 Mecânica Materiais Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2004/09 - 2005/01 Órgãos de Máquinas Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2004/09 - 2005/01 Órgãos de Máquinas I Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2004/02 - 2004/06 Desenho e Sistemas Gráficos Engenharia Informática (Licenciatura) Universidade da Beira Interior, Portugal
2004/02 - 2004/06 Desenho e Sistemas Gráficos Engenharia Química (Licenciatura) Universidade da Beira Interior, Portugal
2004/02 - 2004/06 Órgãos de Máquinas II Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2003/09 - 2004/01 Mecânica dos Materiais Engenharia Electromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2003/09 - 2004/01 Órgãos de Máquinas Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2003/09 - 2004/01 Órgãos de Máquinas I Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2003/02 - 2003/06 Desenho e Sistemas Gráficos Engenharia Informática (Licenciatura) Universidade da Beira Interior, Portugal
2003/02 - 2003/06 Desenho e Sistemas Gráficos Engenharia Química (Licenciatura) Universidade da Beira Interior, Portugal
2003/02 - 2003/06 Mecânica dos Sólidos Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2003/02 - 2003/06 Mecânica dos Sólidos Engenharia Aeronáutica (Licenciatura) Universidade da Beira Interior, Portugal
2002/09 - 2003/01 Órgãos de Máquinas Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2002/09 - 2003/01 Órgãos de Máquinas I Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2002/09 - 2003/01 Vibrações e Ruído Sistemas Aeroespaciais (Mestrado) Universidade da Beira Interior, Portugal
2002/02 - 2002/06 Desenho e Sistemas Gráficos Engenharia Informática (Licenciatura) Universidade da Beira Interior, Portugal
2002/02 - 2002/06 Desenho e Sistemas Gráficos Engenharia Química (Licenciatura) Universidade da Beira Interior, Portugal
2002/02 - 2002/06 Órgãos de Máquinas II Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2002/02 - 2002/06 Novos Materiais Engenharia da Produção e Gestão Industrial (Licenciatura) Universidade da Beira Interior, Portugal
2001/09 - 2002/01 Órgãos de Máquinas Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
2001/09 - 2002/01 Órgãos de Máquinas I Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
2000/02 - 2000/06 Tecnologia Mecânica I Engenharia Mecânica (Licenciatura) Universidade da Beira Interior, Portugal
1997/09 - 1998/01 Mecânica Aplicada I Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
1997/09 - 1998/01 Mecânica Aplicada I Engenharia Aeronáutica (Licenciatura) Universidade da Beira Interior, Portugal
1997/02 - 1997/06 Mecânica Aplicada II Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
1997/02 - 1997/06 Mecânica Aplicada II Engenharia Aeronáutica (Licenciatura) Universidade da Beira Interior, Portugal
1996/09 - 1997/01 Mecânica Aplicada I Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
1996/09 - 1997/01 Mecânica Aplicada I Engenharia Aeronáutica (Licenciatura) Universidade da Beira Interior, Portugal
1996/09 - 1997/01 Tribologia Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
1996/02 - 1996/06 Mecânica Aplicada II Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
1996/02 - 1996/06 Mecânica Aplicada II Engenharia Aeronáutica (Licenciatura) Universidade da Beira Interior, Portugal
1995/09 - 1996/01 Mecânica Aplicada I Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
1995/09 - 1996/01 Mecânica Aplicada I Engenharia Aeronáutica (Licenciatura) Universidade da Beira Interior, Portugal
1995/09 - 1996/01 Tribologia Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
1995/02 - 1995/06 Mecânica Aplicada II Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal
1995/02 - 1995/06 Mecânica Aplicada II Engenharia Aeronáutica (Licenciatura) Universidade da Beira Interior, Portugal
1994/09 - 1995/01 Órgãos de Máquinas Engenharia Electromecânica (Licenciatura) Universidade da Beira Interior, Portugal
1994/09 - 1995/01 Projeto I Engenharia Eletromecânica (Licenciatura) Universidade da Beira Interior, Portugal

Evaluation committee

Activity description
Role 		Institution / Organization Funding entity
2019 - 2019 Evaluation panel of H2020-FETOPEN-01-2018-2019-2020-RIA_24-01-2019 (Novel Ideas for Radically New Technologies)
Evaluator
 European Union, Belgium
2018 - 2018 Evaluation panel of H2020-FETOPEN-01-2018-RIA (Novel Ideas for Radically New Technologies)
Evaluator
 European Union, Belgium
2017 - 2018 Evaluation panel of Ações Integradas from CRUP
Evaluator
 Conselho de Reitores das Universidades Portuguesas, Portugal
2017 - 2017 Evaluation panel of H2020-FETOPEN-2016-2017-RIA (Novel Ideas for Radically New Technologies)
Evaluator
 European Union, Belgium

Journal scientific committee

Journal title (ISSN) Publisher
2020 - Current Structures (2352-0124) Elsevier
2020 - Current Molecules (1420-3049) MDPI AG
2020 - Current Engineering Failure Analysis (1350-6307) Elsevier
2019 - Current Nanomaterials (2079-4991) MDPI AG
2019 - Current Polymer Testing (0142-9418) Elsevier
2019 - Current Applied Sciences (2076-3417) MDPI AG
2019 - Current European Journal of Environmental and Civil engineering (2116-7214) Informa UK (Taylor & Francis)
2019 - Current Journal of the Brazilian Society of Mechanical Sciences and Engineering (1678-5878) Springer-Verlag
2019 - Current Advances in Mechanical Engineering (1687-8140) SAGE Publications
2019 - Current Journal of The Institution of Engineers (India): Series C (2250-0545) Springer
2018 - Current Cellulose (1572-882X) Springer-Verlag
2018 - Current Thin-Walled Structures (0263-8231) Elsevier
2018 - Current Theoretical and Applied Fracture Mechanics (0167-8442) Elsevier
2018 - Current International Journal of Adhesion and Adhesives (0143-7496) Elsevier
2018 - Current Science and Engineering of Composite Materials (2191-0359) Walter de Gruyter GmbH
2018 - Current Engineering Structures (0141-0296) Elsevier
2017 - Current Chinese Journal of Aeronautics (1000-9361) Elsevier
2017 - Current Journal of Composite Materials (0021-9983) SAGE Publications
2016 - Current Materials & Design (0264-1275) Elsevier
2016 - Current International Journal of Mechanical Sciences (0020-7403) Elsevier
2016 - Current Applied Clay Science (0169-1317) Elsevier
2016 - Current The International Journal of Advanced Manufacturing Technology (1433-3015) Springer-Verlag
2016 - Current The Journal of Adhesion (1545-5823) Informa UK (Taylor & Francis)
2016 - Current International Journal of Damage Mechanics (1530-7921) SAGE Publications
2016 - Current Polymer Composites (1548-0569) Wiley (John Wiley & Sons)
2016 - Current Experimental Mechanics (1741-2765) Springer-Verlag
2016 - Current Particulate Science And Technology (0272-6351) Informa UK (Taylor & Francis)
2016 - Current Journal of Adhesion Science and Technology (1568-5616) Informa UK (Taylor & Francis)
2016 - Current Journal of Engineering Science and Technolog (1823-4690) Taylor's University
2015 - Current Materials and Manufacturing Processes (1532-2475) Informa UK (Taylor & Francis)
2015 - Current Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications (2041-3076) SAGE Publications
2015 - Current Advanced Composites Letters (0963-6935) SAGE Publications
2015 - Current International Journal of Machining and Machinability of Materials (1748-572X) Inderscience Enterprises Ltd.
2015 - Current Ciência & Tecnologia dos Materiais (0870-8312) Elsevier
2015 - Current Scientific Bulletin, Series B (1454-2331) Pollitehnica University of Bucharest
2015 - Current International Journal of Advanced Materials Research (2381-6805) Public Science Framework
2015 - Current International Journal of Automotive Composites (2051-8226) Inderscience Enterprises Ltd.
2015 - Current Nanoscience and Nanoengineering (2331-9755) Horizon Research Publishing Co., Ltd.
2015 - Current Scientific Research and Essays (1992-2248) Academic Journals
2014 - Current Composites Part A Applied Science and Manufacturing (1359-835X) Elsevier
2014 - Current Materials (1996-1944) MDPI AG
2014 - Current eXPRESS Polymer Letters (1788-618X) Department of Polymer Engineering Budapest University of Technology & Economics), Scientific Society of Mechanical Engineerin
2014 - Current Journal of Materials Engineering and Performance (1544-1024) Springer-Verlag
2014 - Current Advances in Materials Science and Engineering (1687-8442) Hindawi Limited
2014 - Current Indian Journal of Engineering & Materials Sciences (0971-4588) NISCAIR
2014 - Current Journal of Marine Science and Application (1993-5048) Springer-Verlag
2014 - Current International Journal of Structural Integrity (1757-9864) Emerald (MCB UP)
2014 - Current Frattura et Integrita (1971-8993) Gruppo Italiano Frattura
2014 - Current Multidiscipline Modeling in Materials and Structures (1573-6113) Emerald (MCB UP)
2014 - Current Journal of Materials Science and Chemical Engineering (2327-6053) Scientific Research Publishing, Inc.
2014 - Current International Scholarly Research Notices (2356-7872) Hindawi Limited
2013 - Current Journal of Applied Polymer Science (1097-4628) Wiley (John Wiley & Sons)
2013 - Current Polymer Bulletin (1436-2449) Springer-Verlag
2013 - Current The Scientific World JOURNAL (1537-744X) Hindawi (The Scientific World)
2012 - Current Composites Part B Engineering (1359-8368) Elsevier
2012 - Current Journal of Materials Science (1573-4803) Springer-Verlag
2012 - Current NDT & E International (0963-8695) Elsevier
2012 - Current Engineering Fracture Mechanics (0013-7944) Elsevier
2012 - Current Chemistry Central Journal (1752-153X) Springer (Biomed Central Ltd.)
2012 - Current Journal of Reinforced Plastics and Composites (1530-7964) SAGE Publications
2012 - Current Journal of Thermoplastic Composite Materials (1530-7980) SAGE Publications
2012 - Current Transport Problems (2300-861X) Exeley, Inc.
2012 - Current Key Engineering Materials (1662-9795) Trans Tech Publications, Ltd.
2012 - Current Research and Reviews in Materials Science and ChemistryJ (2319-6920) Jyoti Academic Press
2011 - Current Mechanics of Advanced Materials and Structures (1537-6494) Informa UK (Taylor & Francis)
2011 - Current Fibers and Polymers (1875-0052) Springer-Verlag
2011 - Current Journal of Polymer Engineering (2191-0340) Walter de Gruyter GmbH
2011 - Current ISRN Mechanical Engineering (2090-5130) Hindawi (International Scholarly Research Network)
2011 - Current Journal of Materials Science Research (1927-0593) Canadian Center of Science and Education
2010 - Current Journal of the European Ceramic Society (0955-2219) Elsevier
2010 - Current International Journal of Fatigue (0142-1123) Elsevier
2010 - Current Strain (1475-1305) Wiley (Blackwell Publishing)
2009 - Current Composite Structures (0263-8223) Elsevier
2009 - Current Materials Science Forum (1662-9752) Trans Tech Publications, Ltd.
2005 - Current Materials Research (1980-5373) SciELO

Other jury / evaluation

Activity description Institution / Organization
2020/11/04 - Current Elaborou, na qualidade de perito externo, um parecer sobre a dissertação de doutoramento Multifunctional Photocurable Advanced Materials for Electronics and Sensing Applications, da responsabilidade Jesús Cristian Mendes Felipe. Este documento, datado de 4/11/2020, emitiu um parecer sobre a aptidão de leitura e defesa pública da referida dissertação na Universidade do País Basco (UPV/EHU), Espanha.
2015/06/25 - Current Fez parte do júri, na qualidade de arguente externo, das provas referentes à disciplina de Projeto de Tese de Sérgio Espele de Oliveira subordinadas ao tema Utilização de Compósitos em Substituição de Ligas de Alumínio na Fabricação de Componentes Usinados. As provas decorreram no Dep. de Engª. Mecânica da Faculdade de Ciências e Tecnologia da Universidade de Coimbra em 25 de junho de 2015. Universidade de Coimbra, Portugal
2016/11/02 - 2016/11/02 Membro do júri Dia Mundial dos Materiais 2016, na qualidade de representante da Universidade da Beira Interior Sociedade Portuguesa de Materiais, Portugal
2015/11/04 - 2015/11/04 Membro do júri Dia Mundial dos Materiais 2015, na qualidade de representante da Universidade da Beira Interior Sociedade Portuguesa de Materiais, Portugal
2014/11/05 - 2014/11/05 Membro do júri Dia Mundial dos Materiais 2014, na qualidade de representante da Universidade da Beira Interior Sociedade Portuguesa de Materiais, Portugal
2014/10/31 - 2014/10/31 Elaborou, na qualidade de perito externo, um parecer sobre a aptidão de leitura e defesa pública da dissertação “Materiales Cerámicos a Partir de Reutilización de Residuos Pétreos de Minería. Diseño, Caracterización y Aplicaciones Técnico-Artísticas”, da responsabilidade de Jesús Montoya Herrera, na Universidade de Granada, Granada-Espanha Universidad de Granada Facultad de Bellas Artes Alonso Cano, Spain
2012/11/07 - 2012/11/07 Membro do júri Dia Mundial dos Materiais 2012, na qualidade de representante da Universidade da Beira Interior Sociedade Portuguesa de Materiais, Portugal
2004/11/03 - 2004/11/03 Membro do júri Dia Mundial dos Materiais 2004, na qualidade de representante da Universidade da Beira Interior Sociedade Portuguesa de Materiais, Portugal
2003/11/05 - 2003/11/05 Membro do júri Dia Mundial dos Materiais 2003, na qualidade de representante da Universidade da Beira Interior Sociedade Portuguesa de Materiais, Portugal