???global.info.a_carregar???
JOSÉ CARLOS FERNANDES TEIXEIRA. Completed the Título de Agregado by Universidade do Minho in Jan 15, 2005; PhD in Chemical Engineering in 1989 by the University of Birmingham (UK) and the Licenciatura in Engenharia Metalomecânica in September 30, 1983 by the Universidade do Minho. He is Full Professor at the Universidade do Minho. Published 48 articles in journals. Has 13 section of books and 9 book. Organized 9 events, including the ECOS in 2018. Supervised 11 PhD theses e co-supervised 4. Has also supervised nearly 100 master theses. Participates or participated as Principal investigator in 15 projects and Researcher in 8 projects. Works in the area of Engineering and Technology with emphasis on Mechanical Engineering. In his curriculum Ciência Vitae the most frequent terms in the context of scientific, technological and artistic-cultural output are: Fluids; Energy; Heat Transfer. His scientific research area is within the field of Transport Phenomena. In this context, one of the main fields concerns the application of non intrusive methods in fluid mechanics. Therefore, in multiphase flows, laser diffraction based techniques and the Phase Doppler Anemometry have been used in various flow configurations either open (sprays) or closed (pipe flows). On the other hand, the Laser Doppler Anemometry and PIV habe been used for velocity measurements in single phase flows, mostly in environmental related applications. Another field of interest is the application of Heat Transfer techniques in energy conversion and processing technologies. Finally, in collaboration with the Numerical Methods Group in the Production Engineering Department, a code for the numerical simulation of the non isothermal flow of complex fluids has been developed. This area has been extended through a collaboration with the University of Ontario, Canada, developing parallel computing techniques in Fluid Flow simulation. Currently he has been involved in a collaborative project with Bosch CarMultimedia to develop computing tools to simulate the manufacturing of PCB's. He has been instrumental is developing an area of research in Biomass applications. It is focused in small scale technologies for heat. A competence network has been funded by the Portuguese Innovation Agency (AdI). He his member of the scientific committee of the Renewable Heat and Cooling EU platform.
Read full resume ↓
Identification

Personal identification

Full name
JOSÉ CARLOS FERNANDES TEIXEIRA

Citation names

  • TEIXEIRA, JOSÉ CARLOS

Author identifiers

Ciência ID
9F1F-9388-CE55
ORCID iD
0000-0001-8459-1837

Knowledge fields

  • Engineering and Technology - Medical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Education
Degree Classification
2005/01/15
Concluded
 na (Título de Agregado)
Major in Engenharia Mecânica
Universidade do Minho Escola de Engenharia, Portugal
"na" (THESIS/DISSERTATION)
 por unanimidade
1989
Concluded
 Engenharia Química (Doutoramento)
University of Birmingham, United Kingdom
"Turbulence in Annular Two Phase Flow" (THESIS/DISSERTATION)
 NA
1983/09/30
Concluded
 Engenharia Metalomecânica (Licenciatura)
Universidade do Minho Escola de Engenharia, Portugal
"Estudo do Comportamento à Fadiga de Juntas Soldadas" (THESIS/DISSERTATION)
 17
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2009/05 - Current Full Professor (University Teacher) Universidade do Minho, Portugal
1997/02 - 2009/05 Associate Professor (University Teacher) Universidade do Minho, Portugal
1989/01 - 1997/02 Assistant Professor (University Teacher) Universidade do Minho, Portugal
1983/10 - 1989/01 Trainee Assistant (University Teacher) Universidade do Minho, Portugal

Positions / Appointments

Category
Host institution 		Employer
2013 - 2021 Conselho Cientifico Escola de Engenharia Universidade do Minho, Portugal
2011/01 - 2021 Director Centro de Investigação Universidade do Minho, Portugal
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2016/09 - 2020/09 Director Departamento Universidade do Minho, Portugal
Universidade do Minho Departamento de Engenharia Mecânica, Portugal

Others

Category
Host institution 		Employer
1996/10 - 1997/08 Mechanical Engn Dpt, University of Wales, Cardiff Cardiff University, United Kingdom
1989/06 - 1989/09 Invited Researcher, AERE Harwell MRC Harwell, United Kingdom
Projects

Contract

Designation Funders
2023/10/01 - 2025/12/31 HI_MOV: Corredor Tecnológico Transfronterizo de Movilidad con Hidrógeno Renovable
160_HI_MOV_1_E
Co-Principal Investigator (Co-PI)
Universidade do Minho Centro de Engenharia Mecânica e Suste¿ntabilidade de Recursos, Portugal
Ongoing
2023/01/01 - 2025/12/31 R2U Technologies Modular Systems
na
Co-Principal Investigator (Co-PI)
Universidade do Minho Centro de Engenharia Mecânica e Suste¿ntabilidade de Recursos, Portugal
 Agência para a Competitividade e Inovação IP
Ongoing
2020/01/01 - 2023/12/31 Centro de Engenharia Mecânica e Sustentabilidade de Recursos – Financiamento Base
UIDB/04077/2020
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2020/01/01 - 2023/12/31 Centro de Engenharia Mecânica e Sustentabilidade de Recursos – Programático UID
UIDP/04077/2020
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2020/12 - 2023/06 Plasma2Gas - New Energy Level - Gasification System
POCI-01-0247-FEDER-070233
Researcher
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Agência Nacional de Inovação SA
Ongoing
2020/03 - 2023/03 AmbWTE - Biomass &Waste to Energy System
POCI-01-0247-FEDER-039838
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Agência Nacional de Inovação SA
Ongoing
2020/03 - 2023 O3F - Um Framework de Optimização para reduzir os Incêndios Florestais
PCIF/GRF/0141/2019
Researcher
Universidade do Minho Centro ALGORITMI, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2019/09 - 2022/09 PRIDOP - Innovation in die-casting and Process Optimizations
40271
Researcher
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
 Agência Nacional de Inovação SA
Ongoing
2018/04 - 2022/06 ThermFire4Woven: Desenvolvimento de estruturas fibrosas avançadas com tratamentos da superfície fibrosa e revestimentos com elevada eficiência térmica e resistência à chama para aplicações de alto valor acrescentado
33637
Researcher
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Agência Nacional de Inovação SA
Ongoing
2018/07/02 - 2021/07/01 Tratamento Hibrido de Agitação Ultrassónica de Ligas Leves Nano-Reforçadas
PTDC/EME-EME/30967/2017
Universidade do Minho, Portugal

Universidade do Porto, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2018/07 - 2021/07 NHyNUS - Novel Hybrid Nano Ultrasonic Stirring
PTDC/EMEEME/30967/2017
PTDC/EMEEME/30967/2017
Researcher
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2019/07 - 2021/06 Selective Soldering Simulation – Thermal and Flow
FOF.QC.P39
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Agência Nacional de Inovação SA
Ongoing
2018 - 2021 NFsCoolingSystem: An advanced microCooling System based on innovative NanoFluids and acoustic streaming
PTDC/EME-SIS/30171/2017
Researcher
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2016/07/01 - 2020/10/01 Exhaust2Energy - Automotive Exhaust Heat Recovery with Thermal Control - Exhaust2Energy
grant.Provided by PTCRIS: 141636
PTDC/EMS-ENE/3009/2014
Universidade do Minho, Portugal

Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal

Universidade de Lisboa Centro de Ciências e Tecnologias Nucleares, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2019/01/01 - 2019/12/31 Centro de Engenharia Mecânica e Sustentabilidade de Recursos
UID/EMS/04077/2019
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2019/01/01 - 2019/12/31 Mechanical Engineering and Resource Sustainability Center
UID/EMS/04077/2019
Universidade do Minho, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2015/01/01 - 2018/12/31 Centro de Engenharia Mecânica e Sustentabilidade de Recursos
UID/EMS/04077/2013
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2015/07 - 2018/06 Advanced Interconnection for High Complexity PCB Assembly
002814/2015
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Agência Nacional de Inovação SA
Concluded
2015/07 - 2018/06 Advanced Interconnection for High Complexity PCB Assembly
002814/2015
Principal investigator
Agência Nacional de Inovação SA
Concluded
2013/07 - 2015/06/30 HMIEXCEL Bosc Car Multimedia- Land Pattern Design by Thermal Simulation
36265/2013
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Agência Nacional de Inovação SA
Concluded
2012/09 - 2013/12/31 Heat Exchanger Material Replacement
na
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Bosch Termotecnologia
Concluded
2012/01/31 - 2013/12/31 Melhoria do desempenho energético de máquina de esterelização de material hospitalar
2011/22931
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Agência Nacional de Inovação SA
Concluded
2011/01/01 - 2013/12/31 Projecto Estratégico - UI 4077 - 2011-2012
PEst-C/EME/UI4077/2011
 Fundação para a Ciência e a Tecnologia
Concluded
2012/01 - 2013/12 Desenvolvimento de uma caldeira a pellets de madeira, dedicada ao aquecimento doméstico
2012/22932
Researcher
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Agência Nacional de Inovação SA
Concluded
2011/01 - 2012/12 BIOMASUD - Mecanismos de sustentabilidade e valorização do mercado de biomassa sólida no espaço SUDOE
SOE2/P2/E414
Researcher
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 European Union
Concluded
2005/01/01 - 2008/06/30 Thermal comfort model applicable to clothing design
POCI/EME/62786/2004
Universidade do Minho, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2006/06 - 2008/06 CEBio - Rede de Competência para a Bioenergia
037/7.1/ADI/NOR
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Agência Nacional de Inovação SA
Concluded
2004/10 - 2005/12 Computação Avançada em Engenharia
n/a
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2002/03 - 2005/03 Estudo dos Mecanismos de Combustão na Valorização Energética de Óleos Usados
EME/42121/2001
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
1998/10 - 2001/10 CLIMEROD - The influence of climate change on coastal sediment erosion
MAS3-CT98-0116
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 European Union
Concluded
1992/01 - 1995/12 CLOUD - Modelling of two phase release dispersion for hazzard assessment
CT-91/166
Principal investigator
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
 European Union
Concluded
Outputs

Publications

Book
  1. Barbosa, F.V.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. Numerical Analysis of Single Jet Impinging a Flat and Non-flat Plate. 2020.
    10.1007/978-3-030-58814-4_34
  2. Ribeiro, P.; Vilarinho, C.; Ferreira, M.; Seabra, E.; Fraga, L.; Teixeira, J.. Strategies for the design of domestic pellet boilers. 2019.
    10.1007/978-3-319-91334-6_91
  3. Esteves, D.; Silva, J.; Rodrigues, N.; Martins, L.; Teixeira, J.; Teixeira, S.. Simulation of PMV and PPD Thermal Comfort Using EnergyPlus. 2019.
    10.1007/978-3-030-24311-1_4
  4. Rodrigues, N.; Silva, J.; Teixeira, J.; Teixeira, S.. Assessment of Indoor Thermal Conditions in a Cinema Room Using CFD Simulation: A Case Study. 2019.
    10.1007/978-3-030-24311-1_3
  5. Barbosa, F.V.; Sousa, S.D.T.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. Application of DOE for the Study of a Multiple Jet Impingement System. 2019.
    10.1007/978-3-030-24302-9_1
  6. Loureiro, I.F.; Leão, C.P.; Costa, F.; Teixeira, J.; Arezes, P.M.. ETdAnalyser: A model-based architecture for ergonomic decision intervention. 2013.
  7. Ferreira, M.; Teixeira, J.C.. Application of variance analysis to the combustion of residual oils. 2012.
    10.1007/978-3-642-31137-6_13
  8. Teixeira, J.C.; Lomba, R.; Teixeira, S.F.C.F.; Lobarinhas, P.. Application of CFD tools to optimize natural building ventilation design. 2012.
    10.1007/978-3-642-31137-6_15
  9. Costa, M.A.V.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. Roughness effects upon the near sediment turbulence patterns. 2002.
Book chapter
  1. José Azevedo; Tiago Bartolomeu; Senhorinha Teixeira; José Teixeira. "Design Concept of a Non-invasive Tagging Device for Blue Sharks". 2023.
    10.1007/978-3-031-09382-1_8
  2. Violeta Carvalho; Nelson Rodrigues; José C. Teixeira; Rui Lima; Senhorinha Teixeira. "Dense-Discrete Phase Simulations of Blood Flow in a Stenotic Coronary". 2023.
    10.1007/978-3-031-10015-4_9
  3. Carlos Castro; Cândida Vilarinho; Manuel E. Ferreira; João Silva; Margarida Gonçalves; André Ribeiro; Nuno Pacheco; José Carlos Teixeira. "The Influence of Fuel Mix on the Devolatilization of RDF Based Coal". 2023.
    10.1007/978-3-031-26849-6_33
  4. Andrei Longo; Cândida Vilarinho; José Carlos Teixeira; Paulo Brito; Margarida Gonçalves. "Dry and Hydrothermal Carbonization of Mixtures of Refuse Derived Fuels, Waste Biomass, and Sewage Sludge". 2023.
    10.1007/978-3-031-26849-6_35
  5. Diogo Silva; João Silva; Paulo Pinto; Senhorinha Teixeira; José Teixeira. "CFD and Wake Analysis of the Wind Flow Through Two Wind Turbines". 2023.
    10.1007/978-981-19-6223-3_77
  6. Inês M. Teixeira; Diogo B. Esteves; Nelson J. Rodrigues; Luís A. Martins; José C. Teixeira; Ana C. Ferreira; Senhorinha F. Teixeira. "Thermal Comfort Assessment of a Small House in Portugal Using EnergyPlus and Ansys Fluent". 2023.
    10.1007/978-981-19-6223-3_94
  7. Oussama El Manssouri; João Silva; Hajji Bekkay; José Teixeira; Senhorinha Teixeira; Mohamed Hajji. "Simulation Numerical of a Bi-fluid Photovoltaic/Thermal Solar Panel". 2023.
    10.1007/978-981-19-6223-3_99
  8. Carvalho, Violeta; Lopes, Diogo; Silva, João; Puga, Hélder; A. Lima, Rui; Carlos Teixeira, José; Teixeira, Senhorinha. "Comparison of CFD and FSI Simulations of Blood Flow in Stenotic Coronary Arteries". In Computational Fluid Dynamics [Working Title]. IntechOpen, 2022.
    10.5772/intechopen.102089
  9. Silva, Diogo; Silva, João; Pinto, Paulo; Teixeira, Senhorinha; TEIXEIRA, JOSÉ CARLOS; Diogo Silva; João Silva; et al. Corresponding author: Silva, Diogo. "Analysis and Validation of a CFD Simulation of the Wind Through a Horizontal Axis Wind Turbine as an Actuator Disc with a Porous Jump Condition". In Innovations in Mechanical Engineering II, 187-199. Springer International Publishing, 2022.
    10.1007/978-3-031-09382-1_16
  10. José Brito; João Silva; José Teixeira; Senhorinha Teixeira. "Energy Performance of a Service Building: Comparison Between EnergyPlus and TRACE700". 364-375. Springer International Publishing, 2021.
    10.1007/978-3-030-86653-2_27
  11. Diogo Esteves; João Silva; Luís Martins; José Teixeira; Senhorinha Teixeira. "Building Energy Performance: Comparison Between EnergyPlus and Other Certified Tools". 493-503. Springer International Publishing, 2021.
    Published • 10.1007/978-3-030-86653-2_36
  12. João Silva; José Brás; Ricardo Noversa; Nelson Rodrigues; Luís Martins; José Teixeira; Senhorinha Teixeira. "Energy Performance of a Service Building: Comparison Between EnergyPlus and Revit". 2020.
    10.1007/978-3-030-58817-5_16
  13. Ricardo Noversa; João Silva; Nelson Rodrigues; Luís Martins; José Teixeira; Senhorinha Teixeira. "Thermal Simulation of a Supermarket Cold Zone with Integrated Assessment of Human Thermal Comfort". 2020.
    10.1007/978-3-030-58817-5_17
  14. TEIXEIRA, JOSÉ. "A CFD Study of a pMDI Plume Spray". Germany, 2014.
    10.1007/978-94-017-8832-8_13
  15. TEIXEIRA, JOSÉ. "Efficiency Evaluation of VHC: a CFD Comparison Study at Constant Flow". Switzerland, 2014.
  16. TEIXEIRA, JOSÉ. "A Form-Closed Cam-Follower Mechanism for a Breath Simulator Machine". In New Trends in Mechanism and Machine Science. Germany, 2014.
    10.1007/978-3-319-09411-3_14
  17. TEIXEIRA, JOSÉ; Esteves, T.C.J.; Cabral, P.; Teixeira, J.C.; Ferreira, A.J.D.. "GIS for the Determination of Bioenergy Potential in the Centre Region of Portugal". Netherlands, 2012.
    10.1007/978-94-007-1858-6_15
  18. TEIXEIRA, JOSÉ. "pMDI Sprays: Theory, Experiment and Numerical Simulation". 2012.
    10.5772/46099
  19. TEIXEIRA, JOSÉ; Oliveira, R.F.; Teixeira, S.; Silva, L.F.; Teixeira, J.C.; Antunes, H.. "Study of a pressurized metered-dose inhaler spray parameters in Fluent". In Proceedings of the WCE2010 World Congress on Engineering 2010, 1083-1087. United Kingdom, 2010.
  20. TEIXEIRA, JOSÉ. "Droplet distribution flowing in a venturi scrubber". In Comparing Design in Nature with Science and Engineering. United Kingdom, 2008.
    10.2495/DN080191
  21. TEIXEIRA, JOSÉ. "Modelling of Heap Leaching for low grade laterite ores". United States, 1999.
  22. TEIXEIRA, JOSÉ. "Design and optimsation of calibrators for thermoplastics profile extrusion". 1997.
  23. TEIXEIRA, JOSÉ. "Transient thermal behaviour of molds for polymer processing". 1995.
  24. TEIXEIRA, JOSÉ. "Evaluation of nozzles for water atomisation in agriculture". 1994.
Conference paper
  1. Ferreira, Ana Cristina Magalhães; Silva, angela; TEIXEIRA, JOSÉ CARLOS; Teixeira, Senhorinha F. C. F; Nebra, S.. Corresponding author: TEIXEIRA, JOSÉ CARLOS. "A brief review on decarbonization and energy transition of Portuguese industry: renewable energies incorporation and efficiency measures". Paper presented in 35th International Conference On Efficiency, Cost, Optimization, Simulation And Environmental Impact Of Energy Systems (ECOS), 2022.
    Published
  2. Barbosa, Flavia V.; Gören, Sara; Constantino, Erany; Teixeira, Senhorinha F. C. F; TEIXEIRA, JOSÉ CARLOS. Corresponding author: Barbosa, Flavia V.. "Heat transfer augmentation in solar systems using multiple air jet and porous surfaces". Paper presented in 35th International Conference On Efficiency, Cost, Optimization, Simulation And Environmental Impact Of Energy Systems (ECOS), 2022.
    Published
  3. Barbosa, Flavia V.; Teixeira, Senhorinha F. C. F; TEIXEIRA, JOSÉ CARLOS. Corresponding author: Barbosa, Flavia V.. "PIV analysis of confined multiple jets impinging on a step surface". Paper presented in 20th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics, Lisbon, 2022.
    Published
  4. Gören, Sara; Barbosa, Flavia; Constantino, Erany; Puga, Hélder; TEIXEIRA, JOSÉ CARLOS. Corresponding author: Barbosa, Flavia. "Integration of Hybrid Porous Casting in Solar Receivers to Increase Solar Systems Efficiency". Paper presented in ASME IMECE, 2022.
    Submitted • 10.1115/imece2022-95625
  5. Rodrigues, Nelson; Teixeira, Inês; Carvalho, Violeta; Santos, Duarte; Velosa, Joao; Ferreira, Ana; Soares, Delfim; TEIXEIRA, JOSÉ CARLOS; Teixeira, Senhorinha. Corresponding author: Rodrigues, Nelson. "2D Simulation of the Placement of a Pin-Through-Hole Component and Solder Paste Melting". Paper presented in ASME IMECE, 2022.
    Published • 10.1115/imece2022-95960
  6. Silva, João Pedro; Teixeira, Senhorinha; TEIXEIRA, JOSÉ CARLOS. Corresponding author: Silva, João Pedro. "An Experimental Setup to Study the Fundamental Phenomena Associated With Biomass Combustion". Paper presented in ASME IMECE, 2022.
    Published • 10.1115/imece2022-95945
  7. Carvalho, Violeta; Rodrigues, Nelson; Rodrigues, Raquel O.; TEIXEIRA, JOSÉ CARLOS; Miranda, João; Lima, Rui A.; Teixeira, Senhorinha. Corresponding author: Carvalho, Violeta. "Influence of the Inlet Velocity on Oxygen Gradients in a Liver-on-a-Chip Model". Paper presented in ASME IMECE, 2022.
    Published • 10.1115/imece2022-96001
  8. Carvalho, Violeta; Rodrigues, Nelson; Rodrigues, Raquel O.; TEIXEIRA, JOSÉ CARLOS; Miranda, João; Lima, Rui A.; Teixeira, Senhorinha. Corresponding author: Carvalho, Violeta. "Study of the Influence of Different Geometries of an Organ-on-a-Chip". Paper presented in ASME IMECE, 2022.
    Published • 10.1115/imece2022-95391
  9. Rodrigues, Nelson; Teixeira, Inês; Carvalho, Violeta; Abreu, Inês; Gonçalves, Inês; Graçoeiro, Diogo; Amaral, Rita; et al. "Summer Grants ‘Verão Com Ciência’, From Foundation for Science and Technology, in Portugal: Experience and Achievements". Paper presented in ASME IMECE, 2022.
    Published • 10.1115/imece2022-96056
  10. Gonçalves, Inês; Marques, João; Silva, João Pedro; TEIXEIRA, JOSÉ CARLOS; Alvelos, Filipe; Tavares, Teresa; Teixeira, Senhorinha. Corresponding author: Teixeira, Senhorinha. "Development of CFD Model to Study the Spread of Wildfires". 2022.
    Published • 10.1115/imece2022-95980
  11. Capela, P.; Souza, M. S.; Costa, S.; Fernandes, M.; Figueiredo, H.; Alves, R.; Delgado, I.; Teixeira, J.; Soares, D.. "Solder Paste Additives for Thermal Expansion Control". Paper presented in ASME IMECE, 2021.
    10.1115/imece2021-72478
  12. Mateus, Duarte; Teixeira, Senhorinha; Rodrigues, Nelson; Carvalho, Violeta; Santos, Duarte; Veloso, Joao; Soares, Delfim; Teixeira, Jose. "Numerical Simulation of Solder Paste Printing on Through-Hole Components". Paper presented in ASME IMECE, 2021.
    10.1115/imece2021-73613
  13. Barbosa, Flavia; Teixeira, Jose; Silva, João; Teixeira, Senhorinha. "Numerical Analysis of Multiple Jets Impinging on a Moving Surface". Paper presented in ASME IMECE, 2021.
    10.1115/imece2021-73603
  14. Carvalho, Violeta; Rodrigues, Cristina; Minas, Graça; Lima, Rui; Teixeira, Jose C.; Teixeira, Senhorinha. "i9Masks: From a Multidisciplinary Summer Project to a Non-Accredited Short Course". Paper presented in ASME IMECE, 2021.
    10.1115/imece2021-73495
  15. Silva, João Pedro; Teixeira, Senhorinha; Peters, Bernhard; Teixeira, José Carlos. "Survey of Existing Literature Data on the Biomass Combustion Behavior in Industrial Grate-Fired Boilers". Paper presented in ASME IMECE, 2021.
    10.1115/imece2021-73567
  16. Vilarinho, Maria Cândida; Araújo, Paulo; Teixeira, José Carlos; Silva, Elisabete; Silveira, Dionisio; Soares, Delfim; Paiva, Maria C.; Ribeiro, Daniel; Branco, Marisa. "Influence of Coating on High Performance Heat Resistant Textile Curtains". Paper presented in ASME IMECE, 2021.
    10.1115/imece2021-73307
  17. Oliveira, Victor; Castro, Fernando; Teixeira, Jose Carlos; Araujo, Jorge; Ribeiro, Andre; Carvalho, Joana; Vilarinho, Maria Cândida. "Physicochemical Characterization of the Rejected Waste From the Mechanical and Biological Treatment of Municipal Solid Waste". Paper presented in ASME IMECE, 2021.
    10.1115/imece2021-73595
  18. Carvalho, Violeta; Carneiro, Filipa; Ferreira, Ana C.; Gama, Vasco; Teixeira, Senhorinha; TEIXEIRA, JOSÉ CARLOS. Corresponding author: Carvalho, Violeta. "Steady Flow Studies of the Geometry Effects on the Recirculation Properties at the Iliac Bifurcation". Paper presented in ASME IMECE, 2021.
    Published • 10.1115/imece2021-73450
  19. Silva, João; Guedes, Vitor; Teixeira, Senhorinha; Lobarinhas, Pedro; Teixeira, José Carlos; Rodrigues, Nelson. "Numerical Simulation of the Flow Inside a Horizontal Closed Refrigerated Display Cabinet". Paper presented in ASME IMECE, 2021.
    10.1115/imece2021-73589
  20. Araujo, P.; Teixeira, J.C.; Silveira, D.; Silva, E.; Soares, D.; Fangueiro, R.; Vilarinho, M.C.. "Development of fiber structures for high performance heat resistant curtains". Paper presented in asme imece, 2020.
    10.1115/IMECE2020-24016
  21. Barbosa, F.; Teixeira, S.; Costa, C.; Marques, F.; Teixeira, J.C.. "Experimental study of multiple air jets impinging a moving flat plate". Paper presented in ASME IMECE, 2020.
    10.1115/IMECE2020-23996
  22. Ferreira, A.C.; Teixeira, S.F.C.F.; Teixeira, J.C.F.; Nebra, S.A.. "Analysis of the cost and energy value of forest biomass production: From harvest to end-use". 2020.
  23. Barbosa, F.V.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "Experimental study of multiple jets impinging a flat surface". 2020.
  24. Vinha, Maria Inês; Silva, João; Teixeira, Senhorinha; Gomes, Ana; TEIXEIRA, JOSÉ CARLOS; Teixeira, José Carlos. Corresponding author: TEIXEIRA, JOSÉ CARLOS. "Numerical Study of the Flow Inside a Modular Bag Filter From a Biomass Power Plant". Paper presented in ASME IMECE, 2020.
    https://doi.org/10.1115/IMECE2020-23484
  25. Barbosa, Flavia; Teixeira, Senhorinha; Costa, Carlos; Marques, Filipe; Teixeira, José Carlos; Flavia Barbosa; Senhorinha Teixeira; et al. "Experimental Study of Multiple Air Jets Impinging a Moving Flat Plate". Paper presented in ASME IMECE, 2020.
    10.1115/imece2020-23996
  26. Araujo, Paulo; Teixeira, José Carlos; Silveira, Dionisio; Silva, Elisabete; Soares, Delfim; Fangueiro, Raul; Vilarinho, Maria Cândida; et al. "Development of Fiber Structures for High Performance Heat Resistant Curtains". Paper presented in ASME IMECE, 2020.
    10.1115/imece2020-24016
  27. Antunes, P; Ferreira, Manuel Eduardo; Vilarinho, Maria Cândida; TEIXEIRA, JOSÉ CARLOS. "Energy Analysis and Waste Valorization in a Kraft Paper Plant". Paper presented in ASME IMECE, 2020.
    Published • 10.1115/imece2020-24002
  28. Ferreira, A.C.; Teixeira, S.F.C.F.; Oliveira, R.F.; Teixeira, J.C.. "CFD simulation of an Alfa-Stirling engine to study the geometrical parameters on the engine performance". 2019.
    10.1115/IMECE2019-11542
  29. Soares, D.F.; Ribeiro, P.E.; Capela, P.; Barros, D.A.; Cerqueira, M.F.; Teixeira, S.; Macedo, F.; Teixeira, J.C.. "Influence of the applied load on the creep behaviour of tin-silver-copper solder". 2019.
    10.1115/IMECE2019-11356
  30. Couto, D.M.; Gonçalves, M.M.; Carvalho, J.; Ferreira, M.E.; Araújo, J.; Teixeira, J.C.; Vilarinho, C.. "Combustion of biomass based pellets with pyrolysis bio-oils". 2019.
    10.1115/IMECE2019-11593
  31. Barbosa, F.V.; Costa, C.A.P.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "Measurement errors and uncertainty estimation of an experimental set up using a 2D PIV technique". 2019.
    10.1115/IMECE2019-11652
  32. Lopes, D.; Puga, H.; Teixeira, J.. "Numerical study of blood flow in stented arteries: Comparison of stent designs and viscosity models". 2019.
    10.1109/ENBENG.2019.8692571
  33. Barbosa, F.V.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "Numerical analysis of the influence of the jet-to-jet spacing between two adjacent air jets impinging a flat plate". 2019.
    10.1615/TFEC2019.nmf.028498
  34. Ferreira, A.C.; Teixeira, S.; Teixeira, J.C.; Nebra, S.A.. "Thermal energy storage for concentrated solar systems: A technical review and economic considerations". 2019.
  35. Barbosa, F.V.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "Influence of the nozzle-to-plate distance in a jet impinging a cold plate – a numerical approach". 2019.
  36. Ferreira, A.C.; Silva, J.; Teixeira, S.; Teixeira, J.C.; Nebra, S.. "Analysis of the different renewable energy sources in the performance of a Stirling engine". 2019.
  37. Silva, J.; Fraga, L.; Ferreira, M.E.; Chapela, S.; Porteiro, J.; Teixeira, S.F.C.F.; Teixeira, J.. "Combustion modelling of a 20 kW pellet boiler". 2018.
    10.1115/IMECE2018-88063
  38. Esteves, D.; Vilarinho, C.; Ferreira, M.E.; Carvalho, J.; Araújo, J.; Teixeira, J.. "Energy and exergy analysis of a biomass based ceramic plant". 2018.
    10.1115/IMECE2018-88046
  39. Barbosa, F.V.; Teixeira, J.C.F.; Vilarinho, M.C.L.G.; Araújo, J.M.M.G.. "Gasification of RDF from MSW—an overview". 2018.
    10.1201/9781315206172-53
  40. Oliveira, R.F.; Rodrigues, N.; Teixeira, J.C.; Santos, D.; Soares, D.; Cerqueira, M.F.; Teixeira, S.F.C.F.. "A numerical study of solder paste rolling process for PCB printing". 2018.
    10.1115/IMECE2018-88035
  41. Ribeiro, P.E.; Barros, D.A.; Soares, D.F.; Teixeira, J.C.; Cerqueira, M.F.; Capela, P.; Teixeira, S.F.; Macedo, F.. "Influence of the microstructure on the creep behaviour of tin-silver-copper solder". 2018.
    10.1115/IMECE2018-87789
  42. Barbosa, F.V.; Silva, J.P.V.; Ribeiro, P.E.A.; Teixeira, S.F.C.F.; Soares, D.F.; Santos, D.; Cerqueira, M.F.; Teixeira, J.C.F.. "An experimental setup for multiple air jet impingement over a surface". 2018.
  43. Brito, F.P.; Pacheco, N.; Vieira, R.; Martins, J.; Martins, L.; Teixeira, J.; Goncalves, L.M.; Oliveira, J.; Hall, M.. "Efficiency improvement of vehicles using temperature controlled exhaust thermoelectric generators". 2018.
  44. Ferreira, A.C.; Teixeira, S.; Teixeira, J.C.; Nebra, S.. "Application of Cost-Benefit analysis to identify the potential of small-scale cogeneration systems in portuguese building sector". 2018.
  45. Silva, J.; Teixeira, J.; Teixeira, S.; Chapela, S.; Porteiro, J.. "Application of a biomass combustion model to an industrial boiler". 2018.
  46. Fraga, L.G.; Silva, J.; Teixeira, J.C.F.; Ferreira, M.E.C.; Soares, D.F.; Teixeira, S.F.. "The effect of the heating and air flow rate on the mass loss of pine wood particles". 2018.
  47. Barbosa, F.V.; Silva, J.P.V.; Teixeira, S.F.C.F.; Soares, D.F.; Santos, D.N.F.S.; Delgado, I.A.C.C.F.; Teixeira, J.C.F.. "Multiple jet impingement in reflow soldering - A numerical approach". 2018.
  48. Fraga, L.; Silva, J.; Soares, D.F.; Ferreira, M.; Teixeira, S.F.; Teixeira, J.C.. "Study of devolatilization rates of pine wood and mass loss of wood pellets". 2017.
    10.1115/IMECE2017-71939
  49. Vilarinho, C.; Ribeiro, A.; Carvalho, J.; Araújo, J.; Ferreira, M.E.; Teixeira, J.. "Development of a methodology for paint dust waste energetic valorization trough RDF production". 2017.
    10.1115/IMECE2017-71979
  50. Ferreira, A.C.; Teixeira, S.F.C.F.; Teixeira, J.C.; Martins, L.A.B.. "Parametric analysis of the thermal components of an alpha-stirling engine for cogeneration applications". 2017.
    10.1115/IMECE2017-71313
  51. Ribeiro, P.E.; Soares, D.F.; Cerqueira, M.F.; Teixeira, S.F.; Barros, D.A.; Teixeira, J.C.. "Creep behavior of a solder paste with Bi addition". 2017.
    10.1115/IMECE2017-71532
  52. Barbosa, F.V.; Ribeiro, P.E.A.; Cerqueira, M.F.; Soares, D.F.; Teixeira, J.C.F.; Teixeira, S.F.C.F.; Lima, R.A.M.M.; Pinho, D.M.D.. "Rheology characterization of solder paste". 2017.
    10.1115/IMECE2017-71413
  53. Vilarinho, C.; Teixeira, J.; Araújo, J.; Carvalho, J.. "Effect of time and acid concentration on metal extraction from galvanic sludges". 2017.
    10.1115/IMECE2017-71370
  54. Silva, J.; Teixeira, J.; Teixeira, S.; Preziati, S.; Cassiano, J.. "CFD Modeling of Combustion in Biomass Furnace". 2017.
    10.1016/j.egypro.2017.07.179
  55. Ferreira, A.C.; Martins, L.A.S.B.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "Modelling stirling engines for CHP applications: Analysis of the mechanical and thermal losses". 2017.
  56. Oliveira, R.F.; Teixeira, S.F.; Marques, H.M.C.; Teixeira, J.C.. "A correlative cfd study between recirculation area and fpm in VHC design". 2016.
    10.1115/IMECE2016-67329
  57. Silva, J.; Preziati, S.; Teixeira, S.F.; Teixeira, J.C.. "Energy and exergy analysis of a biomass power plant". 2016.
    10.1115/IMECE2016-66899
  58. Ferreira, A.C.; Teixeira, S.F.C.F.; Oliveira, R.F.; Rodrigues, N.J.; Teixeira, J.C.F.; Soares, D.. "CFD modeling the cooling stage of reflow soldering process". 2016.
    10.1115/IMECE201666447
  59. Teixeira, J.C.F.; Teixeira, S.F.C.F.; Cunha, P.; Silva, A.M.. "Thermal driven dispersion of smoke in a parking space". 2016.
    10.1115/IMECE201667498
  60. Ferreira, A.C.; Nunes, M.L.; Martins, L.A.S.B.; Teixeira, S.F.C.F.; Teixeira, J.C.F.; Nebra, S.A.. "Thermal-economic design of a solar dish stirling cogeneration system using a multi-objective approach". 2016.
  61. Oliveira, R.F.; Marques, H.M.C.; Machado, A.V.; Teixeira, J.C.; Teixeira, S.F.. "VHC performance evaluation at constant flow: 30 L/MIN". 2015.
    10.1115/IMECE201552283
  62. Costa, J.; Soares, D.; Teixeira, S.F.; Cerqueira, F.; Macedo, F.; Rodrigues, N.; Ribas, L.; Teixeira, J.C.. "Modeling the reflow soldering process in PCB'S". 2015.
    10.1115/IPACK2015-48720
  63. Ferreira, A.C.; Teixeira, S.; Teixeira, J.C.; Martins, L.B.. "Design optimization of a solar dish collector for its application with stirling engines". 2015.
    10.1115/IMECE2015-52241
  64. Ferreira, A.C.; Vaz, A.I.F.; Teixeira, S.F.; Teixeira, J.C.. "Thermal-economic design of a micro-gas turbine CHP system using a multi-objective optimization approach". 2015.
  65. Sá, A.C.; Teixeira, S.; Teixeira, J.C.. "Modelling the air-fuel mixture in an atmospheric burner". 2015.
  66. Ferreira, J.; Teixeira, J.C.F.; Ferreira, M.E.C.; Araújo, J.. "Quality requirements for the biomass in the SUDOE region". 2015.
  67. Nobre, C.; Gonçalves, M.; Mendes, B.; Vilarinho, C.; Teixeira, J.. "Torrefaction effects on composition and quality of biomass wastes pellets". 2015.
  68. Ferreira, A.C.; Nunes, M.L.; Teixeira, J.C.; Martins, L.B.; Teixeira, S.F.. "Thermodynamic and economic optimization of a solar-powered stirling engine for micro-cogeneration purposes". 2015.
  69. TEIXEIRA, JOSÉ; Oliveira, R.F.; Teixeira, S.F.; Cabral-Marques, H.; Teixeira, J.C.. "Flow Recirculation in VHC Designs". 2014.
  70. Teixeira, S.; Oliveira, R.F.; Rodrigues, N.; Miguel, A.S.; Teixeira, J.C.; Santos Baptista, J.; TEIXEIRA, JOSÉ. "One-way coupling between a CFD model and a transient thermal model of the human body". 2014.
  71. Teixeira, S.; Falcão, E.; Rodrigues, N.; Teixeira, J.C.. "Sensibility studies on a transient thermal model of the human body". 2014.
    10.1109/ICCSA.2014.40
  72. Teixeira, J.; Martins, L.S.B.; Lopes, M.; Teixeira, S.F.; Ferreira, M.E.. "Two stage atmospheric burners: Development and verification of a new mass-energy balance model". 2014.
    10.1115/IMECE2014-38820
  73. Almeida, C.; Nunes, A.A.; Teixeira, S.; Teixeira, J.C.; Lobarinhas, P.. "Jet interaction in cross flow: Experimental and numerical model". 2014.
    10.1115/IMECE2014-38993
  74. Oliveira, R.F.; Silva, M.V.; Machado, A.V.; Oliveira, M.; Cabral-Marques, H.M.; Teixeira, S.F.; Teixeira, J.C.. "Experimental assessment of Emitted Dose from Valved Holding Chamber devices". 2014.
    10.1115/IMECE201438846
  75. Cunha, A.M.; Campos, V.A.; Teixeira, J.C.; Teixeira, S.. "Indoor ventilation in Hospital operating rooms". 2014.
    10.1109/ICCSA.2014.32
  76. Arcipreste, B.; Ribas, L.; Soares, D.; Teixeira, J.C.. "Numerical modeling of wave soldering in PCB". 2014.
    10.1115/IMECE2014-39051
  77. Teixeira, J.C.; Oliveira, A.C.; Teixeira, S.F.. "Thermal hydraulic modeling of shell and tube heat exchangers". 2014.
    10.1615/ihtc15.cpm.009525
  78. Teixeira, S.F.C.F.; Rodrigues, N.N.J.O.; Miguel, A.S.; Oliveira, R.F.; Teixeira, J.C.F.; Baptista, J.S.. "Modeling the thermal environment in an operating room". 2014.
    10.1615/ihtc15.cnv.009593
  79. TEIXEIRA, JOSÉ. "An Experimental Setup for API Assessment of a Valved Holding Chamber Device". 2013.
    10.1115/IMECE2013-65111
  80. TEIXEIRA, JOSÉ. "Thermal-Economic Modelling of a Micro-CHP Unit Based on a Stirling Engine". 2013.
    10.1115/IMECE2013-65126
  81. Costa, J.P.M.; Teixeira, J.C.F.; Silva, L.F.; Teixeira, S.F.C.T.. "Experimental analysis of particles flow inside the volumatic® spacer". 2013.
    10.2495/BIO130031
  82. Oliveira, R.F.; Ferreira, A.C.; Teixeira, S.F.; Teixeira, J.C.; Marques, H.C.. "PMDI spray plume analysis: ACFD study". 2013.
  83. TEIXEIRA, JOSÉ. "Teaching Heat Exchanger Design in Mechanical Engineering with CFD". 2013.
    10.1115/FEDSM2013-16240
  84. TEIXEIRA, JOSÉ. "pMDI Spray Plume Analysis: A CFD Study". 2013.
  85. TEIXEIRA, JOSÉ; Rodrigues, N.J.O.; Teixeira, S.F.C.F.; Miguel, A.S.; Oliveira, R.F.; Teixeira, J.C.F.; Santos Baptista, J.. "Thermal comfort evaluation of an operating room through CFD methodology". 2013.
  86. TEIXEIRA, JOSÉ. "Ash Sintering in a Biomass Pellet Boiler". 2013.
    10.1115/IMECE2013-65246
  87. TEIXEIRA, JOSÉ. "Exergy Efficiency Optimization for Gas Turbine Based Cogeneration Systems". 2013.
    10.1115/IMECE2013-65080
  88. TEIXEIRA, JOSÉ. "Flow Structure Over a Simulated Bed for Coastal Coehsive Sediment Erosion Studies". 2013.
    10.1115/FEDSM2013-16243
  89. TEIXEIRA, JOSÉ. "CFD Simulation of Two-Phase Flow in a Large Scale Venturi Scrubber". 2013.
    10.1115/FEDSM2013-16255
  90. Teixeira, J.C.; Ferreira, R.; Seabra, E.A.; Ferreira, M.E.. "Development and optimization of a small scale pellet burner". 2012.
    10.1115/IMECE2012-88381
  91. TEIXEIRA, JOSÉ. "Modelling Flow recirculation Inside a Holding Chamber". 2012.
    10.1115/IMECE2012-88242
  92. Loureiro, I.F.; Costa, F.; Teixeira, J.; Leão, C.P.; Arezes, P.M.. "Etdanalyser: A model-based architecture for ergonomic decision intervention". 2012.
  93. TEIXEIRA, JOSÉ. "Modeling a Stirling Engine for Cogeneration Applications". 2012.
    10.1115/IMECE2012-88183
  94. Ferreira, A.C.M.; Nunes, M.L.; Teixeira, S.F.C.F.; Leão, C.P.; Silva, A.M.; Teixeira, J.C.F.; Martins, L.A.S.B.. "An economic perspective on small-scale cogeneration systems optimisation". 2011.
  95. Teixeira, S.; Oliveira, R.; Rodrigues, N.; Miguel, A.S.; Teixeira, J.C.. "Experimental validation of a CFD model in a thermal environment characterization". 2011.
  96. Martins, L.B.; Ferreira, A.C.M.; Nunes, M.L.; Leño, C.P.; Teixeira, S.F.C.F.; Marques, F.; Teixeira, J.C.F.. "Optimal design of micro-turbine cogeneration systems for the portuguese buildings sector". 2011.
  97. Martins, L.A.B.; Reis, M.A.; Ferreira, M.E.; Teixeira, J.C.. "Drying kinetics of solid biomass". 2011.
  98. Ferreira, A.C.M.; Teixeira, J.C.F.; Teixeira, S.F.C.F.. "Contributions to the study of blood flow in the abdominal aorta and its branches". 2010.
    10.1115/IMECE2009-13028
  99. Cunha, A.M.F.; Teixeira, J.C.F.; Teixeira, S.F.C.F.. "Computational fluid dynamics applicable to cloth design". 2010.
    10.1115/IMECE2009-13042
  100. Vilarinho, M.C.L.G.; Gonçalves, N.M.B.; Teixeira, J.C.F.. "Optimization of a leaching tank for hydrometallurgical recovery of metals". 2010.
    10.1115/IMECE2009-12926
  101. Oliveira, R.F.; Teixeira, S.F.C.F.; Silva, L.F.; Teixeira, J.C.; Antunes, H.. "Design and development of a new valve geometry for spacer devices". 2010.
    10.1115/IMECE2010-39211
  102. Teixeira, J.C.; Ferreira, R.; Ferreira, M.E.. "Optimization of a small scale pellet boiler". 2010.
    10.1115/IMECE2010-39263
  103. Silva, L.F.; Rebelo, R.; Teixeira, S.; Oliveira, R.; Teixeira, J.C.; Antunes, H.. "Study and development of spacers for pressurized inhaler devices: A project review". 2010.
    10.1115/IMECE2009-13171
  104. Teixeira, J.C.F.; Vasconcelos, B.N.; Ferreira, M.E.C.. "Simulation of a small scale pellet boiler". 2010.
    10.1115/IMECE2009-11133
  105. Ferreira, A.C.M.; Madureira, F.; Nunes, M.L.; Teixeira, S.F.C.F.; Leão, C.P.; Teixeira, J.C.F.; Martins, L.B.. "Development and evaluation of a micro-cogeneration prototype for residential applications". 2010.
    10.1115/IMECE2010-39192
  106. Carneiro, F.; Silva, A.E.; Teixeira, S.F.C.F.; Teixeira, J.C.F.; Lobarinhas, P.A.M.; Ribeiro, V.G.. "The influence of renal branches on the iliac arteries blood flow". 2008.
  107. Teixeira, J.C.F.; Silva, J.C.L.F.; Flores, P.. "Development of mechanical engineering curricula at the university of minho". 2006.
    10.1115/IMECE2006-15170
  108. Lobarinhas, P.A.M.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "Development of an experimental facility to test polymer extrusion". 2006.
    10.1115/IMECE2006-14428
  109. Neves, M.M.; Cunha, J.L.; Arezes, P.M.; Leão, C.P.; Teixeira, S.F.C.F.; Lobarinhas, P.; Teixeira, J.C.. "IN2TEC - A multidisciplinary research project involving researchers, students and industry". 2006.
  110. Lobarinhas, P.A.M.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "A numerical study of the thermal behavior of calibrators for polymer". 2006.
  111. Barros, I.; Cunha, A.M.; Teixeira, J.C.F.; Teixeira, S.F.C.F.. "Simplified model for the thermal boundary condition in polymer injection". 2005.
    10.1115/HT2005-72654
  112. Ferreira, M.E.C.; Martins, J.J.G.; Teixeira, J.C.F.. "Optimization of an effervescent atomizer in the combustion of residue oils". 2005.
    10.1115/HT2005-72427
  113. Teixeira, J.C.F.; Teixeira, S.F.C.F.; Silva, Â.M.E.. "Numerical optimization of a gas turbine cogeneration plant". 2003.
    10.1115/GT2003-38143
  114. Haie, N.; Machado, G.J.; Fortunas, F.C.; Teixeira, J.C.; Martins, J.B.; TEIXEIRA, JOSÉ. "Evaluation and comparison of BEM, FEM and FDM for the solution of some engineering problems". 1996.
    10.2495/BE960191
  115. Azzopardi, B.J.; Teixeira, J.C.F.. "Gas core turbulence and drop velocities in vertical annular two phase flow". 1992.
  116. Teixeira, J.C.F.; Azzopardi, B.J.; Bott, T.R.. "Measurement of turbulence in the gas core of annular two phase flow". 1989.
Conference poster
  1. Carvalho, Violeta; Rodrigues, Nelson; TEIXEIRA, JOSÉ CARLOS; Lima, Rui; Rodrigues, Raquel ; teixeira, senhorinha. "Numerical flow simulations in a liver-on-a-chip". Paper presented in 17th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 5th Conference on Imaging and Visualization, 2021.
Journal article
  1. Flavia V. Barbosa; Senhorinha F.F.C. Teixeira; José C.F. Teixeira. "Heat transfer and fluid dynamics of a single jet impingement – An experimental and numerical approach". International Journal of Thermal Sciences (2024): https://doi.org/10.1016/j.ijthermalsci.2024.108993.
    10.1016/j.ijthermalsci.2024.108993
  2. Hugo Machado; Ana Cristina Ferreira; Senhorinha F. Teixeira; José Carlos Teixeira. "Green Hydrogen Value Chain: Modelling of a PV Power Plant Integrated with H2 Production for Industry Application". Energies (2024): https://doi.org/10.3390/en17061414.
    10.3390/en17061414
  3. João Silva; Senhorinha Teixeira; José Teixeira. "A Review of Biomass Thermal Analysis, Kinetics and Product Distribution for Combustion Modeling: From the Micro to Macro Perspective". Energies (2023): https://doi.org/10.3390/en16186705.
    10.3390/en16186705
  4. Lelis Fraga; Eduardo Ferreira; Pedro Ribeiro; Carlos Castro; Jorge Martins; José C. Teixeira. "Combustion Instability and Ash Agglomeration in Wood Pellets Boiler". Energies (2023): https://doi.org/10.3390/en16186539.
    10.3390/en16186539
  5. Reinaldo Rodrigues de Souza; Barbosa, Filipe; Nobrega, Glauco; Cardoso, Elaine M; TEIXEIRA, JOSÉ CARLOS; Moita, Ana; Rui A. Lima. "Experimental study of an innovative elastomer-based heat exchanger". Case Studies in Thermal Engineering 49 (2023): https://doi.org/10.1016/j.csite.2023.103365.
    Published • 10.1016/j.csite.2023.103365
  6. João Pedro Silva; Senhorinha Teixeira; José Carlos Teixeira. "Characterization of the physicochemical and thermal properties of different forest residues". Biomass and Bioenergy (2023): https://doi.org/10.1016/j.biombioe.2023.106870.
    10.1016/j.biombioe.2023.106870
  7. Carlos Castro; Margarida Gonçalves; Andrei Longo; Cândida Vilarinho; Manuel Ferreira; André Ribeiro; Nuno Pacheco; José C. Teixeira. "Influence of Temperature in the Thermo-Chemical Decomposition of Below-Stoichiometric RDF Char—A Macro TGA Study". Energies (2023): https://doi.org/10.3390/en16073064.
    10.3390/en16073064
  8. João Silva; João Marques; Inês Gonçalves; Rui Brito; Senhorinha Teixeira; José Teixeira; Filipe Alvelos. "A Systematic Review and Bibliometric Analysis of Wildland Fire Behavior Modeling". Fluids (2022): https://doi.org/10.3390/fluids7120374.
    10.3390/fluids7120374
  9. João Silva; Carlos Castro; Senhorinha Teixeira; José Teixeira. Corresponding author: João Silva. "Evaluation of the Gas Emissions during the Thermochemical Conversion of Eucalyptus Woodchips". Processes (2022): https://doi.org/10.3390/pr10112413.
    10.3390/pr10112413
  10. Erany D. G. Constantino; Senhorinha F. C. F. Teixeira; José C. F. Teixeira; Flavia V. Barbosa. "Innovative Solar Concentration Systems and Its Potential Application in Angola". Energies (2022): https://doi.org/10.3390/en15197124.
    10.3390/en15197124
  11. Andrews Souza; Paulina Capela; Vítor Lopes; Filipe Prior; Hélder Puga; Delfim Soares; José Teixeira. "Thermal Contact Resistance between Mold Steel and Additively Manufactured Insert for Designing Conformal Channels: An Experimental Study". Journal of Manufacturing and Materials Processing (2022): https://doi.org/10.3390/jmmp6050099.
    10.3390/jmmp6050099
  12. Lelis Gonzaga Fraga; João Silva; José Carlos Teixeira; Manuel E. C. Ferreira; Senhorinha F. Teixeira; Cândida Vilarinho; Maria Margarida Gonçalves. "Study of Mass Loss and Elemental Analysis of Pine Wood Pellets in a Small-Scale Reactor". Energies (2022): https://doi.org/10.3390/en15145253.
    10.3390/en15145253
  13. José Grilo; Vítor Hugo Carneiro; José Carlos Teixeira; Hélder Puga. "Effect of Ultrasonic Melt Treatment on Solidification Behavior of Al7SiMg Alloy". International Journal of Metalcasting (2022): https://doi.org/10.1007/s40962-022-00829-2.
    10.1007/s40962-022-00829-2
  14. Barbosa, Flavia V; Lobarinhas, Pedro AM; Teixeira, Senhorinha FCF; Teixeira, José CF. "Project-Based Learning in a Mechanical Engineering Course: A new proposal based on student's views". International Journal of Mechanical Engineering Education (2022): 030641902210782. http://dx.doi.org/10.1177/03064190221078259.
    10.1177/03064190221078259
  15. Lopes, V.; Puga, H.; Gomes, I.V.; Peixinho, N.; Teixeira, J.C.; Barbosa, J.. "Magnesium stents manufacturing: Experimental application of a novel hybrid thin-walled investment casting approach". Journal of Materials Processing Technology 299 (2022): 117339. http://dx.doi.org/10.1016/j.jmatprotec.2021.117339.
    10.1016/j.jmatprotec.2021.117339
  16. Vieira, Duarte Nuno; Lima, Luisa; Santos, Duarte; Teixeira, Senhorinha F.C.F; Teixeira, Jose Carlos. Corresponding author: Vieira, Duarte Nuno. "The effect of acrylic conformal coating in the reliability of solder joints". IEEE Transactions on Components, Packaging and Manufacturing Technology (2022): 1-1. http://dx.doi.org/10.1109/tcpmt.2022.3163687.
    10.1109/tcpmt.2022.3163687
  17. Silva, João Pedro; Teixeira, Senhorinha; Grilo, Élson; Peters, Bernhard; Teixeira, José Carlos. "Analysis and monitoring of the combustion performance in a biomass power plant". Cleaner Engineering and Technology 5 (2021): 100334. http://dx.doi.org/10.1016/j.clet.2021.100334.
    10.1016/j.clet.2021.100334
  18. Souza, R.R.; Faustino, Vera; Oliveira, J.D.; Gonçalves, Inês M.; Miranda, João M.; Moita, Ana S.; Moreira, A.L.N.; et al. "A novel and extremely stable nanofluid based on iron oxide nanoparticles: Experimental investigations on the thermal performance". Thermal Science and Engineering Progress 26 (2021): 101085. http://dx.doi.org/10.1016/j.tsep.2021.101085.
    10.1016/j.tsep.2021.101085
  19. Flavia V. Barbosa; Senhorinha F. C. F. Teixeira; TEIXEIRA, JOSÉ CARLOS. Corresponding author: Flavia V. Barbosa. "Experimental and Numerical Study of Multiple Jets Impinging a Step Surface". Energies 14 20 (2021): 6659-6659. https://doi.org/10.3390/en14206659.
    10.3390/en14206659
  20. Vieira, Duarte Nuno; Lima, Ana; Santos, Duarte; Rodrigues, Nélson; Carvalho, Violeta; Puga, Hélder; Teixeira, Senhorinha F. C. F; Teixeira, José Carlos. "Prediction of Solder Joint Reliability with Applied Acrylic Conformal Coating". Journal of Electronic Materials 51 1 (2021): 273-283. http://dx.doi.org/10.1007/s11664-021-09232-9.
    10.1007/s11664-021-09232-9
  21. Lopes, D.; Agujetas, R.; Puga, H.; Teixeira, J.; Lima, R.; Alejo, J.P.; Ferrera, C.. "Analysis of finite element and finite volume methods for fluid-structure interaction simulation of blood flow in a real stenosed artery". International Journal of Mechanical Sciences 207 (2021): 106650. http://dx.doi.org/10.1016/j.ijmecsci.2021.106650.
    10.1016/j.ijmecsci.2021.106650
  22. Castro, Carlos; Fraga, Lelis; Ferreira, Eduardo; Martins, Jorge; Ribeiro, Pedro; Teixeira, José C.. "Experimental Studies on Wood Pellets Combustion in a Fixed Bed Combustor Using Taguchi Method". Fuels 2 4 (2021): 376-392. http://dx.doi.org/10.3390/fuels2040022.
    10.3390/fuels2040022
  23. H. Puga; J. Barbosa; V.H. Carneiro; F.V. Barbosa; J.C. Teixeira. "Optimizing high-volume ultrasonic melt degassing using synchronized kinematic translation". Journal of Materials Research and Technology 14 (2021): 2832-2844. https://doi.org/10.1016/j.jmrt.2021.08.098.
    10.1016/j.jmrt.2021.08.098
  24. Barbosa, Flávia V.; Sousa, Sérgio D.T.; Teixeira, Senhorinha F.C.F.; Teixeira, José C.F.. "Application of Taguchi Method for the Analysis of a Multiple Air Jet Impingement System with and without Target Plate Motion". International Journal of Heat and Mass Transfer 176 (2021): 121504. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2021.121504.
    10.1016/j.ijheatmasstransfer.2021.121504
  25. Violeta Carvalho; Filipa Carneiro; Ana C. Ferreira; Vasco Gama; José C. Teixeira; Senhorinha Teixeira. "Numerical Study of the Unsteady Flow in Simplified and Realistic Iliac Bifurcation Models". Fluids 6 8 (2021): 284-284. https://doi.org/10.3390/fluids6080284.
    10.3390/fluids6080284
  26. Carvalho, Violeta; Arcipreste, Bruno; Soares, Delfim; Ribas, Luís; Rodrigues, Nelson; Teixeira, Senhorinha; Teixeira, José C.. "Experimental measurements of the shear force on surface mount components simulating the wave soldering process". Soldering & Surface Mount Technology 34 1 (2021): 16-23. http://dx.doi.org/10.1108/ssmt-12-2020-0057.
    10.1108/ssmt-12-2020-0057
  27. Silva, João; Ferreira, Ana Cristina; Teixeira, Senhorinha; Martins, Luís; Ferreira, Eduardo; Teixeira, José Carlos. "Sawdust drying process in a large-scale pellets facility: An energy and exergy analysis". Cleaner Environmental Systems 2 (2021): 100037. http://dx.doi.org/10.1016/j.cesys.2021.100037.
    10.1016/j.cesys.2021.100037
  28. José Grilo; Vítor Hugo Carneiro; José Carlos Teixeira; Hélder Puga. "Manufacturing Methodology on Casting-Based Aluminium Matrix Composites: Systematic Review". Metals 11 3 (2021): 436-436. https://doi.org/10.3390%2Fmet11030436.
    10.3390/met11030436
  29. TEIXEIRA, JOSÉ CARLOS. "Application of a cost-benefit model to evaluate the investment viability of the small-scale cogeneration systems in the Portuguese context". International Journal of Sustainable Energy Planning and Management (2021): Vol. 30 (2021)-Vol. 30 (2021). https://journals.aau.dk/index.php/sepm/article/view/5400.
    10.5278/IJSEPM.5400
  30. Violeta Carvalho; Diana Pinho; Rui A. Lima; José Carlos Teixeira; Senhorinha Teixeira. "Blood Flow Modeling in Coronary Arteries: A Review". Fluids 6 2 (2021): 53-53. https://doi.org/10.3390%2Ffluids6020053.
    10.3390/fluids6020053
  31. Carvalho, Violeta; Arcipreste, Bruno; Soares, Delfim; Ribas, Luís; Rodrigues, Nelson; teixeira, senhorinha; TEIXEIRA, JOSÉ CARLOS. "Experimental procedure to validate the numerical simulation of the wave soldering process". Journal of Electronic Packaging (2021):
    https://doi.org/10.1115/1.4050981
  32. TEIXEIRA, JOSÉ CARLOS; Flavia Barbosa; Carlos Costa; Senhorinha Teixeira; Jose Carlos Teixeira. "Measurement Errors and Uncertainty Quantification of a 2D-PIV Experimental Setup for Jet Flow Characterization". ASME J. Risk Uncertainty Part B (2020): https://doi.org/10.1115%2F1.4047649.
    https://doi.org/10.1115/1.4047649
  33. Violeta Carvalho; Nelson Rodrigues; Ricardo Ribeiro; Pedro F. Costa; José C. F. Teixeira; Rui A. Lima; Senhorinha F. C. F. Teixeira. "Hemodynamic study in 3D printed stenotic coronary artery models: experimental validation and transient simulation". Computer Methods in Biomechanics and Biomedical Engineering (2020): https://doi.org/10.1080/10255842.2020.1842377.
    10.1080/10255842.2020.1842377
  34. Lelis Gonzaga Fraga; João Silva; Senhorinha Teixeira; Delfim Soares; Manuel Ferreira; José Teixeira. "Thermal Conversion of Pine Wood and Kinetic Analysis under Oxidative and Non-Oxidative Environments at Low Heating Rate". Proceedings 58 1 (2020): 23-23. https://doi.org/10.3390%2Fwef-06921.
    10.3390/wef-06921
  35. Roberto Magalhães; Senhorinha Teixeira; Manuel Ferreira; José Teixeira. "Influence of Plate Orifice in the Pre-Mixing of Gas-Powered Water Heaters". Proceedings 58 1 (2020): 17-17. https://doi.org/10.3390%2Fwef-06930.
    10.3390/wef-06930
  36. Lopes, V.; Puga, H.; Barbosa, J.; Teixeira, J.C.. "Effect of Yttria Mould Coating on the Investment Casting of AZ91D-1 wt% CaO Magnesium Alloy". International Journal of Metalcasting 14 1 (2020): 98-107. http://www.scopus.com/inward/record.url?eid=2-s2.0-85066031282&partnerID=MN8TOARS.
    10.1007/s40962-019-00339-8
  37. Brito, F.P.; Pacheco, N.; Vieira, R.; Martins, J.; Martins, L.; Teixeira, J.; Goncalves, L.M.; Oliveira, J.; Hall, M.J.. "Efficiency improvement of vehicles using temperature controlled exhaust thermoelectric generators". Energy Conversion and Management 203 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85075467361&partnerID=MN8TOARS.
    10.1016/j.enconman.2019.112255
  38. Soares, D.; Sarmento, M.; Barros, D.; Peixoto, H.; Figueiredo, H.; Alves, R.; Delgado, I.; Teixeira, J.C.; Cerqueira, F.. "The effect of Bi addition on the electrical and microstructural properties of SAC405 soldered structure". Soldering and Surface Mount Technology (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85082794969&partnerID=MN8TOARS.
    10.1108/SSMT-10-2019-0029
  39. Ferreira, A.C.; Silva, J.; Teixeira, S.; Teixeira, J.C.; Nebra, S.A.. "Assessment of the Stirling engine performance comparing two renewable energy sources: Solar energy and biomass". Renewable Energy 154 (2020): 581-597. http://www.scopus.com/inward/record.url?eid=2-s2.0-85081984371&partnerID=MN8TOARS.
    10.1016/j.renene.2020.03.020
  40. Grilo, J.; Puga, H.; Carneiro, V.H.; Tohidi, S.D.; Barbosa, F.V.; Teixeira, J.C.. "Effect of hybrid ultrasonic and mechanical stirring on the distribution of m-SiCp in A356 alloy". Metals 10 5 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85084368362&partnerID=MN8TOARS.
    10.3390/met10050610
  41. Fraga, L.G.; Silva, J.; Teixeira, S.; Soares, D.; Ferreira, M.; Teixeira, J.. "Influence of operating conditions on the thermal behavior and kinetics of pine wood particles using thermogravimetric analysis". Energies 13 11 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85090874248&partnerID=MN8TOARS.
    10.3390/en13112756
  42. Barbosa, F.V.; Teixeira, S.F.C.F.; Teixeira, J.C.F.. "Experimental and numerical analysis of the influence of the nozzle-to-plate distance in a jet impingement process". International Journal of Thermodynamics 23 2 (2020): 81-91. http://www.scopus.com/inward/record.url?eid=2-s2.0-85090790680&partnerID=MN8TOARS.
    10.5541/ijot.653527
  43. Lopes, D.; Puga, H.; Teixeira, J.; Lima, R.. "Blood flow simulations in patient-specific geometries of the carotid artery: A systematic review". Journal of Biomechanics 111 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85090402327&partnerID=MN8TOARS.
    10.1016/j.jbiomech.2020.110019
  44. Lopes, D.; Puga, H.; Teixeira, J.C.; Teixeira, S.F.. "Fluid–Structure Interaction study of carotid blood flow: Comparison between viscosity models". European Journal of Mechanics, B/Fluids 83 (2020): 226-234. http://www.scopus.com/inward/record.url?eid=2-s2.0-85085650280&partnerID=MN8TOARS.
    10.1016/j.euromechflu.2020.05.010
  45. José Lopes; João Silva; Senhorinha Teixeira; José Teixeira. "Numerical Modeling and Optimization of an Air Handling Unit". Energies 14 1 (2020): 68-68. https://doi.org/10.3390%2Fen14010068.
    10.3390/en14010068
  46. Ana Cristina Ferreira; Angela Silva; José Carlos Teixeira; Senhorinha Teixeira. "Multi-Objective Optimization of Solar Thermal Systems Applied to Portuguese Dwellings". Energies 13 24 (2020): 6739-6739. https://doi.org/10.3390%2Fen13246739.
    10.3390/en13246739
  47. Teixeira, J.C.F.; Østergaard, P.A.. "Development in efficiency, cost, optimization, simulation and environmental impact of energy systems". International Journal of Sustainable Energy Planning and Management 22 (2019): 1-4. http://www.scopus.com/inward/record.url?eid=2-s2.0-85071021305&partnerID=MN8TOARS.
    10.5278/ijsepm.3359
  48. Barbosa, F.V.; Teixeira, J.C.F.; Teixeira, S.F.C.F.; Lima, R.A.M.M.; Soares, D.F.; Pinho, D.M.D.. "Rheology of F620 solder paste and flux". Soldering and Surface Mount Technology 31 2 (2019): 125-132. http://www.scopus.com/inward/record.url?eid=2-s2.0-85058845208&partnerID=MN8TOARS.
    10.1108/SSMT-08-2018-0027
  49. Fraga, L.G.; Teixeira, J.C.F.; Ferreira, M.E.C.. "The potential of renewable energy in timor-leste: An assessment for biomass". Energies 12 8 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85065715700&partnerID=MN8TOARS.
    10.3390/en12081441
  50. Vasconcelos, B.; Teixeira, J.C.; Dragone, G.; Teixeira, J.A.. "Oleaginous yeasts for sustainable lipid production—from biodiesel to surf boards, a wide range of “green” applications". Applied Microbiology and Biotechnology (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85064091879&partnerID=MN8TOARS.
    10.1007/s00253-019-09742-x
  51. Lopes, D.; Puga, H.; Teixeira, J.C.; Teixeira, S.F.. "Influence of arterial mechanical properties on carotid blood flow: Comparison of CFD and FSI studies". International Journal of Mechanical Sciences 160 (2019): 209-218. http://www.scopus.com/inward/record.url?eid=2-s2.0-85067870110&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2019.06.029
  52. Soares, D.; Leitão, H.; Lau, C.S.; Teixeira, J.C.; Ribas, L.; Alves, R.; Teixeira, S.; Cerqueira, M.F.; Macedo, F.. "Effect of the Soldering Atmosphere on the Wettability Between Sn4.0Ag0.5Cu (in wt.%) Lead-Free Solder Paste and Various Substrates". Journal of Materials Engineering and Performance 27 10 (2018): 5011-5017. http://www.scopus.com/inward/record.url?eid=2-s2.0-85047664049&partnerID=MN8TOARS.
    10.1007/s11665-018-3419-2
  53. Vasconcelos, B.; Teixeira, J.C.; Dragone, G.; Teixeira, J.A.. "Optimization of lipid extraction from the oleaginous yeasts Rhodotorula glutinis and Lipomyces kononenkoae". AMB Express 8 1 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85051239127&partnerID=MN8TOARS.
    10.1186/s13568-018-0658-4
  54. Ferreira, A.C.; Nunes, M.L.; Teixeira, J.C.F.; Martins, L.A.S.B.; Teixeira, S.F.C.F.; Nebra, S.A.. "Design of a solar dish Stirling cogeneration system: Application of a multi-objective optimization approach". Applied Thermal Engineering 123 (2017): 646-657. http://www.scopus.com/inward/record.url?eid=2-s2.0-85020017721&partnerID=MN8TOARS.
    10.1016/j.applthermaleng.2017.05.127
  55. Carneiro, V.H.; Capela, P.; Teixeira, J.C.; Teixeira, S.; Cerqueira, F.; Macedo, F.; Ribas, L.; Soares, D.. "Influence of Copper Layer Content in the Elastic and Damping Behavior of Glass-Fiber/Epoxy-Resin Composites". Applied Composite Materials 23 6 (2016): 1219-1228. http://www.scopus.com/inward/record.url?eid=2-s2.0-84997335610&partnerID=MN8TOARS.
    10.1007/s10443-016-9510-7
  56. Rodrigues, N.; Ferreira, A.C.; Teixeira, S.F.; Soares, D.; Teixeira, J.C.; Cerqueira, F.; Macedo, F.. "Contact angle measurement of SAC 305 solder: numerical and experimental approach". Journal of Materials Science: Materials in Electronics 27 9 (2016): 8941-8950. http://www.scopus.com/inward/record.url?eid=2-s2.0-84965065058&partnerID=MN8TOARS.
    10.1007/s10854-016-4924-4
  57. Barbosa, F.V.; Afonso, J.L.; Rodrigues, F.B.; Teixeira, J.C.F.. "Development of a solar concentrator with tracking system". Mechanical Sciences 7 2 (2016): 233-245. http://www.scopus.com/inward/record.url?eid=2-s2.0-84997497010&partnerID=MN8TOARS.
    10.5194/ms-7-233-2016
  58. Ferreira, A.C.; Nunes, M.L.; Teixeira, J.C.F.; Martins, L.A.S.B.; Teixeira, S.F.C.F.. "Thermodynamic and economic optimization of a solar-powered Stirling engine for micro-cogeneration purposes". Energy 111 (2016): 1-17. http://www.scopus.com/inward/record.url?eid=2-s2.0-84971301576&partnerID=MN8TOARS.
    10.1016/j.energy.2016.05.091
  59. Brito, F.P.; Alves, A.; Pires, J.M.; Martins, L.B.; Martins, J.; Oliveira, J.; Teixeira, J.; Goncalves, L.M.; Hall, M.J.. "Analysis of a Temperature-Controlled Exhaust Thermoelectric Generator During a Driving Cycle". Journal of Electronic Materials 45 3 (2016): 1846-1870. http://www.scopus.com/inward/record.url?eid=2-s2.0-84959525741&partnerID=MN8TOARS.
    10.1007/s11664-015-4258-7
  60. Lau, C.S.; Khor, C.Y.; Soares, D.; Teixeira, J.C.; Abdullah, M.Z.. "Thermo-mechanical challenges of reflowed lead-free solder joints in surface mount components: A review". Soldering and Surface Mount Technology 28 2 (2016): 41-62. http://www.scopus.com/inward/record.url?eid=2-s2.0-84964240520&partnerID=MN8TOARS.
    10.1108/SSMT-10-2015-0032
  61. Gonçalves, C.; Leitão, H.; Lau, C.S.; Teixeira, J.C.; Ribas, L.; Teixeira, S.; Cerqueira, M.F.; Macedo, F.; Soares, D.. "Wetting behaviour of SAC305 solder on different substrates in high vacuum and inert atmosphere". Journal of Materials Science: Materials in Electronics 26 7 (2015): 5106-5112. http://www.scopus.com/inward/record.url?eid=2-s2.0-84931575906&partnerID=MN8TOARS.
    10.1007/s10854-015-3037-9
  62. Rodrigues, N.J.O.; Oliveira, R.F.; Teixeira, S.F.C.F.; Miguel, A.S.; Teixeira, J.C.; Baptista, J.S.. "Thermal comfort assessment of a surgical room through computational fluid dynamics using local PMV index". Work 51 3 (2015): 445-456. http://www.scopus.com/inward/record.url?eid=2-s2.0-84938310820&partnerID=MN8TOARS.
    10.3233/WOR-141882
  63. TEIXEIRA, JOSÉ. "The role of lubricant feeding conditions on the performance improvement and friction reduction of journal bearings". Tribology International (2014): http://dx.doi.org/10.1016/j.triboint.2013.11.016.
    10.1016/j.triboint.2013.11.016
  64. TEIXEIRA, JOSÉ. "Effect of Hot Pressing Variables on the Microstructure, Relative Density and Hardness of Sterling Silver (AG-CU alloy) Powder Compacts". Materials Research (2014): http://dx.doi.org/10.1590/S1516-14392014005000022.
    10.1590/S1516-14392014005000022
  65. Brito, F.P.; Miranda, A.S.; Claro, J.C.P.; Teixeira, J.C.; Costa, L.; Fillon, M.. "Thermohydrodynamic modelling of journal bearings under varying load angle and negative groove flow rate". Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 228 9 (2014): 955-973. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907344189&partnerID=MN8TOARS.
    10.1177/1350650114526388
  66. Puga, H.; Barbosa, J.; Teixeira, J.C.; Prokic, M.. "A new approach to ultrasonic degassing to improve the mechanical properties of aluminum alloys". Journal of Materials Engineering and Performance 23 10 (2014): 3736-3744. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907590074&partnerID=MN8TOARS.
    10.1007/s11665-014-1133-2
  67. TEIXEIRA, JOSÉ. "Analysis of Industrial Waste in Wood Pellets and Co-combustion Products". Waste and Biomass Valorization (2013): http://link.springer.com/article/10.1007/s12649-013-9271-6.
    10.1007/s12649-013-9271-6
  68. TEIXEIRA, JOSÉ. "On the hot pressing of coloured high-gold alloys powder compacts applied to the manufacturing of innovative jewellery items". Gold Bull (2013): http://dx.doi.org/10.1007/s13404-013-0089-6.
    10.1007/s13404-013-0089-6
  69. Ferreira, A.C.M.; Nunes, M.L.; Teixeira, S.F.C.F.; Leão, C.P.; Silva, Â.M.; Teixeira, J.C.F.; Martins, L.A.S.B.. "An economic perspective on the optimisation of a small-scale cogeneration system for the Portuguese scenario". Energy 45 1 (2012): 436-444. http://www.scopus.com/inward/record.url?eid=2-s2.0-84865425823&partnerID=MN8TOARS.
    10.1016/j.energy.2012.05.054
  70. TEIXEIRA, JOSÉ. "Development of new spacer device geometry: a CFD study (Part I)". Computer Methods in Biomechanics and Biomedical Engineering (2011): http://www.ncbi.nlm.nih.gov/pubmed/21491261.
    10.1080/10255842.2011.563359
  71. TEIXEIRA, JOSÉ. "Thermo­economic optimization of CHP systems: from large to small scale applications". International Journal of Engineering and Industrial Management (2011):
  72. TEIXEIRA, JOSÉ. "The effect of oscillations on the flow patterns near a simulated bed". Coastal Engineering (2010):
    10.1016/j.coastaleng.2010.02.007
  73. Marques, J.M.; Carreira, P.M.; Marques, J.E.; Chaminé, H.I.; Fonseca, P.E.; Monteiro Santos, F.A.; Eggenkamp, H.G.M.; Teixeira, J.. "The role of geosciences in the assessment of low-temperature geothermal resources (N-Portugal): A review". Geosciences Journal 14 4 (2010): 423-442. http://www.scopus.com/inward/record.url?eid=2-s2.0-78651286668&partnerID=MN8TOARS.
    10.1007/s12303-010-0034-0
  74. Silva, A.M.; Teixeira, J.C.F.; Teixeira, S.F.C.F.. "Experiments in a large-scale venturi scrubber. Part I: Pressure drop". Chemical Engineering and Processing: Process Intensification 48 1 (2009): 59-67. http://www.scopus.com/inward/record.url?eid=2-s2.0-68749109498&partnerID=MN8TOARS.
    10.1016/j.cep.2008.02.001
  75. Teixeira, J.C.; Sena Jr., F.C.; Silva, A.M.V.; Stragevitch, L.; Silva, J.M.F.. "Moving boundary in non-equilibrium simple batch distillation in non-ideal systems". Chemical Engineering and Processing: Process Intensification 48 11-12 (2009): 1574-1578. http://www.scopus.com/inward/record.url?eid=2-s2.0-71549128659&partnerID=MN8TOARS.
    10.1016/j.cep.2009.10.013
  76. Silva, A.M.; Teixeira, J.C.F.; Teixeira, S.F.C.F.. "Experiments in large scale venturi scrubber. Part II. Droplet size". Chemical Engineering and Processing: Process Intensification 48 1 (2009): 424-431. http://www.scopus.com/inward/record.url?eid=2-s2.0-68749106289&partnerID=MN8TOARS.
    10.1016/j.cep.2008.05.007
  77. Puga, H.; Teixeira, J.C.; Barbosa, J.; Seabra, E.; Ribeiro, S.; Prokic, M.. "The combined effect of melt stirring and ultrasonic agitation on the degassing efficiency of AlSi9Cu3 alloy". Materials Letters 63 24-25 (2009): 2089-2092. http://www.scopus.com/inward/record.url?eid=2-s2.0-68349135280&partnerID=MN8TOARS.
    10.1016/j.matlet.2009.06.059
  78. Araújo, B.J.; Teixeira, J.C.F.; Cunha, A.M.; Groth, C.P.T.. "Parallel three-dimensional simulation of the injection molding process". International Journal for Numerical Methods in Fluids 59 7 (2009): 801-815. http://www.scopus.com/inward/record.url?eid=2-s2.0-66149155503&partnerID=MN8TOARS.
    10.1002/fld.1852
  79. TEIXEIRA, JOSÉ. "Physical Characterization of Estuarine Sediments in the Northern Coast of Portugal". Journal of Coastal Research (2008): http://dx.doi.org/10.2112/08-1017.1.
    10.2112/08-1017.1
  80. Carneiro, F.; Ribeiro, V.G.; Teixeira, J.C.F.; Teixeira, S.F.C.F.. "Numerical study of blood fluid rheology in the abdominal aorta". WIT Transactions on Ecology and the Environment 114 (2008): 169-178. http://www.scopus.com/inward/record.url?eid=2-s2.0-58849153217&partnerID=MN8TOARS.
    10.2495/DN080181
  81. Araújo, M.A.V.C.; Teixeira, J.C.F.; Teixeira, S.F.C.F.. "Application of laser anemometry for measuring critical bed shear stress of sediment core samples". Continental Shelf Research 28 20 (2008): 2718-2724. http://www.scopus.com/inward/record.url?eid=2-s2.0-56349124858&partnerID=MN8TOARS.
    10.1016/j.csr.2008.09.011
  82. TEIXEIRA, JOSÉ. "Development of Mechanical Engineering Curricula at the University of Minho". European Journal of Engineering Education (2007): http://www.tandfonline.com/doi/abs/10.1080/03043790701433210.
    10.1080/03043790701433210
  83. TEIXEIRA, JOSÉ. "Design of a test facility to replicate the transient flow in arterial systems". Journal of Biomechanics (2006):
  84. Martins, J.A.; Malheiro, M.J.A.; Teixeira, J.C.; Cruz Pinto, J.J.C.. "The role of the temperature errors in DSC scans on the prediction of the average density of nuclei in polymers crystallized under quiescent conditions". Thermochimica Acta 391 1-2 (2002): 97-106. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037068094&partnerID=MN8TOARS.
    10.1016/S0040-6031(02)00167-3
  85. Ferreira, M.E.; Teixeira, J.C.F.; Bates, C.J.; Bowen, P.J.. "Detailed investigation of the influence of fluid viscosity on the performance characteristics of plain-orifice effervescent atomizers". Atomization and Sprays 11 2 (2001): 107-124. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035295140&partnerID=MN8TOARS.
  86. TEIXEIRA, JOSÉ; Barros, I.; Teixeira, S.F.C.F.; Teixeira, J.C.; Cunha, A.M.. "Evaluation of the Thermal Behaviour of Injection Moulds". International Polymer Processing 15 1 (2000): 95-102. http://www.hanser-elibrary.com/doi/abs/10.3139/217.1579.
    10.3139/217.1579
  87. TEIXEIRA, JOSÉ. "Modelling heat exchangers for domestic boilers". Journal of Advanced Engineering - Acta Polytechnica (2000): https://ojs.cvut.cz/ojs/index.php/ap/article/view/116.
  88. Azzopardi, B.J.; Teixeira, J.C.F.. "Detailed measurements of vertical annular two-phase flow-part I: Drop velocities and sizes". Journal of Fluids Engineering, Transactions of the ASME 116 4 (1994): 792-795. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027994901&partnerID=MN8TOARS.
    10.1115/1.2911851
  89. Azzopardi, B.J.; Teixeira, J.C.F.. "Detailed measurements of vertical annular two-phase flow-part II: Gas core turbulence". Journal of Fluids Engineering, Transactions of the ASME 116 4 (1994): 796-800. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028054357&partnerID=MN8TOARS.
    10.1115/1.2911852
Journal issue
  1. TEIXEIRA, JOSÉ. "Further Developments on the CFD Flow Analysis Inside the Volumatic Spacer". Selected Proceedings from the 13th International Congress in Project Engineering (2010): http://aeipro.com/files/selected_proceedings/2009/sp09_0443_0451.2438.pdf.

Intellectual property

Patent
  1. Soares, D.; TEIXEIRA, JOSÉ CARLOS; I. Delgado. 2020. "Additivated solder paste and process for applying a reactive additive elemento for selective controlo f soldering temperature on the reflow soldering method".
    Allowed
Provisional application for patent
  1. 2022. "ECO PDMS COMPOSITE HEAT EXCHANGER, METHODS FOR OBTAINING AND USES THEREOF".
  2. 2020. "System for efficient heat recovery and method thereof".
    Protected
Activities

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2021/03 - 2025/01 Hydrogen production by Residual Fraction and Sewage Sludge Updraft Gasification
Supervisor
 Engenharia Mecânica (PhD)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2020/03 - 2024/03 Die-casting of Al-based matrix composites
Co-supervisor
 programa doutoral engenharia mecânica (PhD)
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2019 - 2023 Numerical and in vitro study of blood flow for the optimization of biodegradable magnesium stents manufactured by microcasting
Co-supervisor
 Engenharia Mecânica (PhD)
Universidade do Minho, Portugal
2018 - 2022/11/28 Integration of a Model for Volatile Release in the CFD Simulation of an Industrial Biomass Boiler
Supervisor
 Líderes para Indústrias Tecnológicas (PhD)
Universidade do Minho, Portugal
2021/11 - 2022/11 Modelação Bidimensional da Propagação de Fogo Florestal
Supervisor
 mestrado engenharia mecânica (Master)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2017 - 2022/04 Development of a new technique for manufacturing biodegradable magnesium stents
Co-supervisor
 Engenharia Mecânica (PhD)
Universidade do Minho, Portugal
2021 - 2022/01 Study and evaluation of different modelling tools for the optimization of the vacuum infusion process in glass and carbon fibre reinforced composites
Supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2020 - 2022/01 Simulação da propagação de incêndios florestais
Supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2022 - 2022 Caraterização de meios de supressão no combate a fogos florestais
Supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho Centro de Engenharia Mecânica e Suste¿ntabilidade de Recursos, Portugal
2022 - 2022 Otimização da Produção Específica de Biodiesel: Caso de estudo na Bioport
Supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho Centro de Engenharia Mecânica e Suste¿ntabilidade de Recursos, Portugal
2022 - 2022 Desenvolvimento de modelo matemático de dimensionamento de postos de abastecimento de hidrogénio para veículos
Supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho Centro de Engenharia Mecânica e Suste¿ntabilidade de Recursos, Portugal
2022 - 2022 Comportamento termo-mecânico de portas corta fogo
Supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho Centro de Engenharia Mecânica e Suste¿ntabilidade de Recursos, Portugal
2022 - 2022 Thermal Behaviour of Fibrous Structures
Supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho Centro de Engenharia Mecânica e Suste¿ntabilidade de Recursos, Portugal
2022 - 2022 Modelação Bidimensional da Propagação de Fogo Florestal
Supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho Centro de Engenharia Mecânica e Suste¿ntabilidade de Recursos, Portugal
2021 - 2022 Simulação da propagação de incêndios florestais
Supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho Centro de Engenharia Mecânica e Suste¿ntabilidade de Recursos, Portugal
2021 - 2022 Study and evaluation of different modelling tools for the optimization of the vacuum infusion process in glass and carbon fibre reinforced composites
Supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho Centro de Engenharia Mecânica e Suste¿ntabilidade de Recursos, Portugal
2017 - 2021/11/11 Convection from multiple jets over a complex moving surface
Supervisor
 Líderes para as Indústrias Tecnológicas (PhD)
Universidade do Minho, Portugal
2020 - 2021/11 Caraterização e otimização do desempenho de pequenos rotores eólicos
Co-supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2020 - 2021/06 Thermal Analysis of the Additive Manufacturing Process: The Influence of the Anisotropic Behavior
Supervisor
 Mestrado Integrado em Engenharia do Produto (Master)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2020/11 - 2021/05 Optimization and Energy Analysis of Residual Biomass Torrefaction
Co-supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2019/11 - 2021/04 Validação de modelos de simulação térmica dinâmica num edifício existente em situação real de funcionamento
Supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2019/10 - 2021/04 Aplicação de sistemas de informação geográfica para determinação da disponibilidade de biomassa no concelho de Mondim de Basto
Co-supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2020 - 2021/01 CFD Analysis of the Air Flow Through Horizontal Axis Wind Turbines
Supervisor
 Mestrado Integrado em Engenharia Mecânica (Master)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2014/11/30 - 2019/12 Wood pellets combustion in a fixed bed combustor
Supervisor
 Engenharia Mecânica (PhD)
Universidade do Minho, Portugal
2014/06 - 2019 Sustainable lipids production from municipal wastewaters
Co-supervisor
 Engenharia Química e Biológica (PhD)
Universidade do Minho, Portugal
2012 - 2016 Study and development of a holding chamber for inhalation
Supervisor
 Engenharia Mecânica (PhD)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2006 - 2010 Influência do ciclo cardíaco no escoamento sanguíneo na vizinhança da bifurcação ilíaca
Supervisor
 Mechanical Engineering (PhD)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2005 - 2009/04 Intregrated Three-dimensional Flow and Thermal Simulation of the Injection Moulding Process
Supervisor
 Engenharia Mecânica (PhD)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2003 - 2008/11 Atomização Efervescente na Combustão de Óleos Usados
Supervisor
 Mechanical Engineering (PhD)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2004 - 2008 Numerical and Experimental Study of Venturi Scrubbers
Co-supervisor
 Engenharia de Produção e Sistemas (PhD)
Universidade do Minho, Portugal
1999 - 2004/02 Modelação do Comportamento Térmico de Moldes de Injecção
Supervisor
 Engenharia Mecânica (PhD)
Universidade do Minho, Portugal
2000/09 - 2004 Erosion Mechanisms in Marine Sediments
Supervisor
 Engenharia Mecânica (PhD)
Universidade do Minho, Portugal
1999 - 2003 Estudo e Modelação do Arrefecimento de Extrudidos em Calibradores
Supervisor
 Engenharia Mecânica (PhD)
Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2018/06/17 - 2018/06/21 ECOS 2018 - 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (2018/06/17 - 2018/06/21)
Conference (President of the Organising Committee)
 Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2016/11 - 2016/11 Sessão 2-7-3 Computational Modeling – Thermal Simulations, ASME International Mechanical Engineering Congress and Exhibition, Phoenix, Novembro 2016 (2016/11 - 2016/11)
Congress (Co-organisor)
 Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2015/11 - 2015/11 Sessão 7-5-2 Advanced Power Cycles, ASME International Mechanical Engineering Congress and Exhibition, Houston, Novembro 2015 (2015/11 - 2015/11)
Congress (Co-organisor)
 Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2014/08 - 2014/08 Sessão Mixed Convection na 15th International Heat Transfer Conference, IHTC-15, Kyoto, Agosto de 2014. Japan (2014/08 - 2014/08)
Conference (Co-organisor)
 Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2012/11 - 2012/11 Sessão 6-29-1 Biofuel Conversion, Firing and Power, ASME International Mechanical Engineering Congress and Exhibition, Houston, Novembro 2012 (2012/11 - 2012/11)
Congress (Co-organisor)
 Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2011/06/14 - 2011/06/15 2º Congresso Ibérico de Biocombustíveis Sólidos, Universidade do Minho, Guimarães, 14-15 Junho 2011 (2011/06/14 - 2011/06/15)
Congress (Co-organisor)
 Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2010/11 - 2010/11 Sessão 2-4-1 Vibration and Accoustics in Respiratory and Cardiovascular Applications I, ASME International Mechanical Engineering Congress and Exhibition, Vancouver, 2010, Novembro 2010 (2010/11 - 2010/11)
Congress (Co-organisor)
 Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2010/06 - 2010/06 1º Congresso Ibérico de Biocombustíveis Sólidos, Universidade de Vigo, Ponte Vedra, Junho 2010 (2010/06 - 2010/06)
Congress (Co-organisor)
 Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal
2008/04/06 - 2008/04/09 Bioenergy: Challenges and Opportunities (2008/04/06 - 2008/04/09)
Conference (President of the Organising Committee)
 Universidade do Minho/ Mechanical Engineering and Resource Sustainability Center, Portugal

Association member

Society Organization name Role
2020/11 - Current ECOS International Society, Incorporated - a California Public Benefit Corporation. Member of the Board of Directors
2017 - 2021 European Technology and Innovation Platform on Renewable Heating and Cooling steering committee

Conference scientific committee

Conference name Conference host
2022/07/03 - 2022/07/07 ECOS 2022 - 35th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems Copenhagen, Denmark
2021/06/28 - 2021/07/02 ECOS 2021 - 34th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems Taormina, Sicily
2020/06/29 - 2020/07/02 ECOS 2020 - 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems Osaka Prefecture University Graduate School of Engineering
2019/06/23 - 2019/06/28 ECOS 2019 - 32 nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems Silesian University of Technology
2017/07/02 - 2017/07/07 ECOS 2017 - 30th International Conference on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems San Diego State University