???global.info.a_carregar???
Luis Filipe Martins de Menezes. Concluiu o(a) Título de Agregado em Engenharia Mecânica em 2003 pelo(a) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Doutoramento em Engenharia Mecânica em 1995 pelo(a) Universidade de Coimbra Faculdade de Ciencias e Tecnologia e Licenciatura em Engenharia Mecânica em 1987 pelo(a) Universidade de Coimbra Faculdade de Ciencias e Tecnologia. É Professor Catedrático no(a) Universidade de Coimbra e Professor Catedrático no(a) Universidade de Coimbra Faculdade de Ciencias e Tecnologia. Publicou 114 artigos em revistas especializadas. Possui 9 livro(s).
Identification

Personal identification

Full name
Luis Filipe Martins de Menezes

Citation names

  • Menezes, Luis

Author identifiers

Ciência ID
A815-1728-E826
ORCID iD
0000-0002-4703-9346

Email addresses

  • luis.menezes@uc.pt (Professional)
  • luis.menezes@uc.pt (Professional)

Websites

Languages

Language Speaking Reading Writing Listening Peer-review
French Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
English Intermediate (B1) Advanced (C1) Intermediate (B1) Intermediate (B1)
Spanish; Castilian Beginner (A1) Advanced (C1) Beginner (A1) Beginner (A1)
Portuguese Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Education
Degree Classification
2003
Concluded
Engenharia Mecânica (Título de Agregado)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Unanimidade
1995
Concluded
Engenharia Mecânica (Doutoramento)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"Modelação Tridimensional e Simulação Numérica dos Processos de Enformação por Deformação Plástica - Aplicação à Estampagem de Chapas Metálicas" (THESIS/DISSERTATION)
Distinção e Louvor
1987
Concluded
Engenharia Mecânica (Licenciatura)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
"---" (THESIS/DISSERTATION)
17
Affiliation

Teaching in Higher Education

Category
Host institution
Employer
2012 - Current Full Professor (University Teacher) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2004 - 2012 Associate Professor (University Teacher) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1995 - 2004 Assistant Professor (University Teacher) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1989 - 1995 Assistant (University Teacher) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1987 - 1989 Trainee Assistant (University Teacher) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
1986 - 1987 Tutor (University Teacher) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Universidade de Coimbra Departamento de Engenharia Mecânica, Portugal

Others

Category
Host institution
Employer
2013/09/01 - 2019 Vice-Reitor Universidade de Coimbra, Portugal
2009 - 2013 SubDirector Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2009/07/01 - 2012/07/01 Membro do Conselho Científico das Ciências Exactas e das Engenharias Fundação para a Ciência e a Tecnologia, Portugal
2005/04/01 - 2010/10/01 Coordenador da Unidade de I&D Centro de Engenharia Mecânica da Universidade de Coimbra (CEMUC) Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2005 - 2010 Vice-Presidente do Conselho Científico da Faculdade de Ciências e Tecnologia da Univ de Coimbra Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
Projects

Grant

Designation Funders
2021/10/02 - Current Métodos computacionais para otimizar o processo de fabrico aditivo SLM
PTDC/EME-EME/31657/2017
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2016/01 - 2018/12 Watch4ming: Monitoring the stamping of advanced high strength steels Stichting Weten
2013/07 - 2015/11 Experimental and Numerical Simulation Analysis in the Optimisation of Warm Forming of lightweight advanced sheet materials Stichting Weten
2012/05 - 2015/10 Numerical Simulation and Automatic Design of multi-step sheet metal forming processes Stichting Weten
2011/04 - 2014/09 Characterization of the Constitutive Behavior of Metal Sheets from a Single Multi-Path-Experimental-Test by Inverse Analysis Stichting Weten
2011/04 - 2014/03 Numerical modelling of fatigue crack propagation Stichting Weten
2010/04 - 2013/07 N2C: Nagata patch descritization toward continuous treatment of contact with friction Stichting Weten
2007/08 - 2011/08 Mechanical, wear and fatigue properties of sintered Nanotube-based functionally graded materials Stichting Weten
2007/08 - 2010/12 STUDY OF FRICTION IN SHEET METAL FORMING: BRIDGING THE GAP BETWEEN THE EXPERIMENTAL AND THE NUMERICAL ANALYSIS Stichting Weten
2007/08 - 2010/12 Numerical analysis and modelling of heat treatments on metallic geometrically complex parts Stichting Weten
2005/06 - 2008/06 FORTAB - Formability of aluminium friction stir welded tailored blanks Stichting Weten
2005/04 - 2008/06 Evaluation of Mechanical Properties of Thin Films by Nanoindentation: Numerical Simulation and Experimental Validation Stichting Weten

Contract

Designation Funders
2023/03/12 - 2026/03/11 Development of multiscale approaches to improve the application of self-adaptive coatings in low friction mechanical systems
2022.08459.PTDC
Universidade de Coimbra, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2021/01/01 - 2025/12/31 Produção Avançada e Sistemas Inteligentes
LA/P/0112/2020
Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2019/10 - 2021/10 Modelação e simulação numérica do dano em chapas metálicas: abordagem acoplada com o comportamento anisotrópico e a assimetria tensão-compressão para a previsão da formabilidade
PTDC/EME-EME/30592/2017
Universidade do Minho, Portugal

Universidade de Coimbra, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Universidade de Aveiro, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2019/10 - 2020/10 Watch4ming: Monitorização da estampagem de aços de alta resistência
PTDC/EMS-TEC/6400/2014
Universidade do Minho, Portugal

Universidade de Coimbra, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Universidade de Aveiro, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2019/01/01 - 2019/12/31 Centro de Engenharia Mecânica
UID/EMS/00285/2019
Universidade de Trás-os-Montes e Alto Douro, Portugal

Universidade do Porto, Portugal

Universidade de Coimbra, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2016/05/01 - 2019/10/31 Melhorar o fabrico de placas bipolares metálicas para células de combustível através do processo de conformação com borracha
PTDC/EMS-TEC/0702/2014
Universidade do Minho, Portugal

Universidade de Coimbra, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2013/07/01 - 2015/11/30 Análise experimental e numérica na optimização do processo de estampagem a quente de ligas leves
PTDC/EMS-TEC/1805/2012
Universidade do Minho, Portugal

Universidade de Coimbra, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Universidade de Aveiro, Portugal

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2012/05/01 - 2015/10/31 Simulação numérica e projecto automático de processos multi-etapas de conformação de chapa metálica
PTDC/EME-TME/118420/2010
Universidade de Coimbra, Portugal

Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Universidade de Aveiro, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2011/04/01 - 2014/09/30 Caracterização do comportamento constitutivo de chapas metálicas a partir de um único ensaio experimental multi-trajectória por análise inversa
PTDC/EME-TME/113410/2009
Universidade de Coimbra, Portugal

Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal

Universidade de Aveiro, Portugal

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2011/04/01 - 2014/03/31 Modelação numérica da propagação de fendas por fadiga
PTDC/EME-PME/114892/2009
Universidade de Coimbra, Portugal

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2011/01/01 - 2012/12/31 Projecto Estratégico - UI 285 - 2011-2012
PEst-C/EME/UI0285/2011
Universidade de Coimbra, Portugal

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2007/08/16 - 2011/08/15 Propriedades Mecânicas, de desgaste e de fadiga, de compósitos sinterizados, com nano-tubos de carbono e com gradiente de propriedades
PTDC/EME-PME/68664/2006
Universidade do Minho, Portugal

Universidade de Coimbra, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2007/08/01 - 2010/12/31 Modelação e análise numérica de tratamentos térmicos em componentes metálicos de geometria complexa
PTDC/EME-TME/68975/2006
Universidade de Coimbra, Portugal

Universidade de Aveiro Centro de Tecnologia Mecânica e Automação, Portugal

Universidade de Aveiro, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2005/04/01 - 2008/06/30 Avaliação de Propriedades Mecânicas de Filmes Finos por Nanoindentação: Simulação Numérica e Validação Experimental
POCI/EME/57510/2004
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal

Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal

Universidade de Aveiro, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
Outputs

Publications

Book
  1. Nouira, M.; Oliveira, M.; Khalfallah, A.; Alves, J.; Menezes, L.. The Effect of the Loading Path History on the Fracture Loci. 2021.
    10.1007/978-3-030-52071-7_39
  2. Meriem, N.; Marta, O.; Ali, K.; José, A.; Luís, M.. Analysis on the Dependence of the Fracture Locus on the Pressure and the Lode Angle. 2020.
    10.1007/978-3-030-27146-6_59
  3. Barros, P.D.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. Earing prediction in drawing and ironing processes using an advanced yield criterion. 2013.
    10.4028/www.scientific.net/KEM.554-557.2266
  4. Simões, V.M.; Coër, J.; Laurent, H.; Oliveira, M.C.; Alves, J.L.; Manach, P.Y.; Menezes, L.F.. Sensitivity analysis of process parameters in the drawing and ironing Processes. 2013.
    10.4028/www.scientific.net/KEM.554-557.2256
  5. Neto, D.M.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.; Manach, P.Y.. Applying Nagata Patches in the Description of Smooth Tool Surfaces used in Sheet Metal Forming Simulations. 2013.
    10.4028/www.scientific.net/KEM.554-557.2277
  6. Aguir, H.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.; Belhadjsalah, H.. Cazacu and barlat criterion identification using the cylindrical cup deep drawing test and the coupled artificial neural networks-genetic algorithm method. 2012.
    10.4028/www.scientific.net/KEM.504-506.637
  7. Teixeira-Dias, F.; Menezes, L.F.. Thermal residual stresses in aluminium matrix composites. 2011.
    10.1007/8611_2010_1
  8. Ramalho, A.; Oliveira, M.C.; Menezes, L.F.. Sliding Friction: Global Versus Local Analysis. 2011.
    10.1002/9783527628513.ch19
  9. Padmanabhan, R.; Oliveira, M.C.; Menezes, L.F.. Lightweight metal alloy tailor welded blanks. 2011.
    10.1016/B978-1-84569-704-4.50005-8
  10. Chaparro, B.M.; Alves, J.L.; Menezes, L.F.; Fernandes, J.V.. Optimization of the phenomenological constitutive models parameters using genetic algorithms. 2007.
    10.1007/3-540-69845-0_3
Book chapter
  1. Nouira, Mariem; Oliveira, Marta C.; Khalfallah, Ali; Neto, Diogo M.; Alves, José L.; Menezes, Luís F.. "The Role of the Yield Criterion on Stress and Strain Paths Under Non-proportional Loadings". In Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity, 663-673. Springer Nature Switzerland, 2023.
    10.1007/978-3-031-42093-1_64
  2. Maia, A.; Ferreira, E.; Oliveira, M.C.; Menezes, L.F.; Andrade-Campos, A.. "Numerical optimization strategies for springback compensation in sheet metal forming". 51-82. 2017.
Conference abstract
  1. Ferreira, Elisabete; Maia, Ana; Cardoso, Marta C.; Menezes, Luis; Andrade-Campos,. "Response surface methodology in automotive industry". Paper presented in SRG GRIDS, Aveiro, 2015.
    Published
Conference paper
  1. OLIVEIRA, M.C.. "Considering the stiffness of the forming tools in the numerical analysis of the ironing process". 2023.
    10.21741/9781644902479-160
  2. Oliveira, M.C.; Neto, D.M.; Barros, P.D.; Alves, J.L.; Menezes, L.F.. "Forming defects prediction in cup drawing and embossing of a thick steel sheet". 2021.
    10.25518/esaform21.1525
  3. Marques, B.M.; Andrade, C.M.; Neto, D.M.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Numerical analysis of residual stresses in parts produced by selective laser melting process". 2020.
    10.1016/j.promfg.2020.04.167
  4. Oliveira, M.C.; Neto, D.M.; Alves, J.L.; Menezes, L.F.. "Study on the influence of the yield surface shape in the hole expansion test". 2020.
    10.1088/1757-899X/967/1/012085
  5. Neto, D.M.; Barros, J.R.; Oliveira, M.C.; Antunes, P.V.; Ramalho, A.; Amaral, R.L.; Santos, A.D.; Alves, J.L.; Menezes, L.F.. "Heat generation when forming AHSS: Experimental and numerical analysis of tensile and draw-bead tests". 2020.
    10.1088/1757-899X/967/1/012086
  6. Oliveira, M.C.; Germain, L.; Laurent, H.; Simões, V.M.; Neto, D.M.; Alves, J.L.; Menezes, L.F.. "A modified Hockett-Sherby law enabling the description of the thermomechanical behaviour of the AA6061-T6". 2020.
    10.1016/j.promfg.2020.04.277
  7. Tse, R.; Im, M.; Tang, S.-K.; Menezes, L.F.; Dias, A.M.P.G.; Pau, G.. "Self-adaptive sensing iot platform for conserving historic buildings and collections in museums". 2020.
  8. Andrade, C.M.; Barros, J.R.; Neto, D.M.; Ramalho, A.; Oliveira, M.C.; Menezes, L.F.; Alves, J.L.. "The role of viscoelasticity in the mechanical modelling of rubbers". 2019.
    10.1063/1.5112751
  9. Brito, J.P.; Oliveira, M.C.; Neto, D.M.; Alves, J.L.; Menezes, L.F.. "Influence of the characteristics of the 3D FE mesh on the evolution of variables used to characterize the stress state". 2019.
    10.1063/1.5112712
  10. Laurent, H.; Simoes, V.M.; Oliveira, M.C.; Menezes, L.F.. "The influence of warm forming conditions on the natural aging and springback of a 6016-T4 aluminum alloy". 2018.
    10.1088/1757-899X/418/1/012020
  11. Barros, P.D.; Neto, D.M.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "Study on the influence of orthotropy and tension-compression asymmetry of metal sheets in springback and formability predictions". 2018.
    10.1088/1742-6596/1063/1/012053
  12. Simoes, V.M.; Neto, D.M.; Oliveira, M.C.; Alves, J.L.; Laurent, H.; Menezes, L.F.. "Temperature analysis during the drawing of an aluminum cylindrical cup". 2018.
    10.1088/1742-6596/1063/1/012137
  13. Neto, D.M.; Barros, P.D.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Study of the frictional contact conditions in the hole expansion test". 2018.
    10.1088/1742-6596/1063/1/012139
  14. Simões, V.M.; Laurent, H.; Oliveira, M.C.; Menezes, L.F.. "Natural aging effect on the forming behavior of a cylindrical cup with an Al-Mg-Si alloy". 2016.
    10.1063/1.4963639
  15. Neto, D.M.; Oliveira, M.C.; Alves, J.L.; Santos, A.D.; Menezes, L.F.. "Prediction of wrinkling and springback in sheet metal forming". 2016.
    10.1051/matecconf/20168003005
  16. Martins, J.M.P.; Neto, D.M.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "Automatic correction of the time step in implicit simulations of thermomechanical problems". 2016.
    10.1051/matecconf/20168007002
  17. Ferreira, E.; Maia, A.; Oliveira, M.C.; Menezes, L.F.; Andrade-Campos, A.. "Optimization strategies and statistical analysis for springback compensation in sheet metal forming". 2015.
  18. Maia, A.; Ferreira, E.; Oliveira, M.C.; Menezes, L.F.; Andrade-Campos, A.. "Robust optimization strategies for sheet metal springback compensation". 2015.
  19. Prates, P.A.; Fernandes, J.V.; Oliveira, M.C.; Sakharova, N.A.; Menezes, L.F.. "On the characterization of the plastic anisotropy in orthotropic sheet metals with a cruciform biaxial test". 2014.
    10.1088/1757-899X/10/1/012142
  20. Neto, D.M.; Barros, P.D.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Finite element analysis of wrinkling during cup drawing". 2014.
  21. Oliveira, M.C.; Alves, J.L.; Menezes, L.F.; Ramalho, A.. "Finite element analysis of the amontons-coulomb's model using local and global friction tests". 2011.
    10.1063/1.3589779
  22. Menezes, L.F.; Neto, D.M.; Oliveira, M.C.; Alves, J.L.. "Improving computational performance through HPC techniques: Case study using DD3IMP in-house code". 2011.
    10.1063/1.3589683
  23. Alves, J.L.; Bouvier, S.; Jomâa, M.; Billardon, R.; Oliveira, M.C.; Menezes, L.F.. "Kinematic hardening: Characterization, modeling and impact on springback prediction". 2007.
    10.1063/1.2740891
  24. Padmanabhan, R.; Oliveira, M.C.; Baptista, A.J.; Alves, J.L.; Menezes, L.F.. "Study on the influence of the refinement of a 3-D finite element mesh in springback evaluation of plane-strain channel sections". 2007.
    10.1063/1.2740916
  25. Oliveira, M.C.; Baptista, A.J.; Alves, J.L.; Menezes, L.F.; Green, D.E.; Ghaei, A.. "Influence of drawbeads in deep-drawing of plane-strain channel sections: Experimental and FE analysis". 2007.
    10.1063/1.2740915
  26. Baptista, A.J.; Alves, J.L.; Oliveira, M.C.; Rodrigues, D.M.; Menezes, L.F.. "Incremental volumetric remapping method: Analysis and error evaluation". 2007.
    10.1063/1.2740914
  27. Padmanabhan, R.; Oliveira, M.C.; Baptista, A.J.; Alves, J.L.; Menezes, L.F.. "Influence of anisotropy properties in finite element optimization of blank shape using NURBS surfaces". 2007.
  28. Alves, J.L.; Bouvier, S.; Oliveira, M.C.; Menezes, L.F.. "Drawbeads: To be or not to be". 2005.
    10.1063/1.2011297
  29. Baptista, A.J.; Alves, J.L.; Oliveira, M.C.; Rodrigues, D.M.; Menezes, L.F.. "Application of the incremental volumetric remapping method in the simulation of multi-step deep drawing processes". 2005.
    10.1063/1.2011213
  30. Oliveira, M.C.; Alves, J.L.; Chaparro, B.M.; Menezes, L.F.. "Study on the influence of the work hardening models constitutive parameters identification in the springback prediction". 2005.
    10.1063/1.2011228
Journal article
  1. Oliveira, M C; Gomes, C; Neto, D M; Alves, J L; Menezes, L F. "Influence of process and material parameters on the twist springback prediction of a panel". IOP Conference Series: Materials Science and Engineering 1284 1 (2023): 012067. http://dx.doi.org/10.1088/1757-899x/1284/1/012067.
    http://dx.doi.org/10.1088/1757-899x/1284/1/012067
  2. Nouira, Mariem; Cristina Oliveira, Marta; Khalfallah, Ali; Luís Alves, José; Filipe Menezes, Luís. "Comparative fracture prediction study for two materials under a wide range of stress states using seven uncoupled models". Engineering Fracture Mechanics 279 (2023): 108952. http://dx.doi.org/10.1016/j.engfracmech.2022.108952.
    10.1016/j.engfracmech.2022.108952
  3. Oliveira, Marta C.; Prcela, Ivan; Cvitanic, Vedrana; Neto, Diogo M.; Alves, José Luis; Menezes, Luis Filipe. "On the Effect of the Tension-Compression Ratio on Forming of Isotropic Materials". Key Engineering Materials 926 (2022): 1108-1121. http://dx.doi.org/10.4028/p-0873q9.
    10.4028/p-0873q9
  4. Salles, Felipe F.; Oliveira, Marta C.; Neto, Diogo M.; Alves, José Luis; Menezes, Luis Filipe; Fernandes, José Valdemar. "Influence of the Anisotropic Behavior on Equibiaxial Paths". Key Engineering Materials 926 (2022): 1007-1020. http://dx.doi.org/10.4028/p-u7u5i8.
    10.4028/p-u7u5i8
  5. Neto, Diogo M.; Oliveira, Marta C.; Dick, Robert E.; Alves, José Luis; Menezes, Luis Filipe. "Non-Uniform Effect of the Contact Conditions on the Earing Profile in Cylindrical Cups of Anisotropic Materials". Key Engineering Materials 926 (2022): 1188-1194. http://dx.doi.org/10.4028/p-9i8j3o.
    10.4028/p-9i8j3o
  6. Habraken, Anne Marie; Aksen, Toros Arda; Alves, José L.; Amaral, Rui L.; Betaieb, Ehssen; Chandola, Nitin; Corallo, Luca; et al. "Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations". International Journal of Material Forming 15 5 (2022): http://dx.doi.org/10.1007/s12289-022-01672-w.
    10.1007/s12289-022-01672-w
  7. Oliveira, M C; Neto, D M; Pereira, A.F.G.; Alves, J L; Menezes, LF. "Evaluating the influence of the deformation of the forming tools in the thickness distribution along the wall of a cylindrical cup". IOP Conference Series: Materials Science and Engineering 1238 1 (2022): 012079. http://dx.doi.org/10.1088/1757-899x/1238/1/012079.
    10.1088/1757-899x/1238/1/012079
  8. Oliveira, M C; Neto, D M; Alves, J L; Menezes, L F. "Influence of the orthotropic behaviour on defects prediction in cup drawing, reverse redrawing and expansion". IOP Conference Series: Materials Science and Engineering 1157 1 (2021): 012072. http://dx.doi.org/10.1088/1757-899x/1157/1/012072.
    10.1088/1757-899x/1157/1/012072
  9. Neto, D M; Oliveira, M C; Alves, J L; Menezes, L F. "Study on the influence of the strain rate sensitivity on the springback of the AA5086 alloy under warm forming conditions". IOP Conference Series: Materials Science and Engineering 1157 1 (2021): 012043. http://dx.doi.org/10.1088/1757-899x/1157/1/012043.
    10.1088/1757-899x/1157/1/012043
  10. Oliveira, M.C.; Cazacu, O.; Chandola, N.; Alves, J.L.; Menezes, L.F.. "On the effect of the ratio between the yield stresses in shear and in uniaxial tension on forming of isotropic materials". Mechanics Research Communications 114 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85104992063&partnerID=MN8TOARS.
    10.1016/j.mechrescom.2021.103693
  11. Khalfallah, A.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Constitutive parameter identification of CB2001 yield function and its experimental verification using tube hydroforming tests". International Journal of Mechanical Sciences 185 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85086311755&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2020.105868
  12. Neto, D.M.; Simões, V.M.; Oliveira, M.C.; Alves, J.L.; Laurent, H.; Oudriss, A.; Menezes, L.F.. "Experimental and numerical analysis of the heat generated by plastic deformation in quasi-static uniaxial tensile tests". Mechanics of Materials 146 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85083813150&partnerID=MN8TOARS.
    10.1016/j.mechmat.2020.103398
  13. P.D. Barros; M.C. Oliveira; J.L. Alves; L.F. Menezes. "On the impact of modelling tension-compression asymmetry on earing and thickness predictions". Advances in Materials and Processing Technologies (2019): 1-16. https://doi.org/10.1080/2374068X.2019.1622299.
    10.1080/2374068X.2019.1622299
  14. D.M. Neto; M. Pais; M.C. Oliveira; J.L. Alves; L.F. Menezes. "Thermomechanical analysis of the draw bead test". Advances in Materials and Processing Technologies 5 3 (2019): 401-417. https://doi.org/10.1080/2374068X.2019.1616478.
    10.1080/2374068X.2019.1616478
  15. Neto, D.M.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Numerical study on the formability of metallic bipolar plates for proton exchange membrane (PEM) fuel cells". Metals 9 7 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85073285897&partnerID=MN8TOARS.
    10.3390/met9070810
  16. Simões, V.M.; Oliveira, M.C.; Laurent, H.; Menezes, L.F.. "The punch speed influence on warm forming and springback of two Al-Mg-Si alloys". Journal of Manufacturing Processes 38 (2019): 266-278. http://www.scopus.com/inward/record.url?eid=2-s2.0-85060086553&partnerID=MN8TOARS.
    10.1016/j.jmapro.2019.01.020
  17. Simões, V.; Laurent, H.; Oliveira, M.; Menezes, L.. "The influence of warm forming in natural aging and springback of Al-Mg-Si alloys". International Journal of Material Forming 12 1 (2019): 57-68. http://www.scopus.com/inward/record.url?eid=2-s2.0-85042080898&partnerID=MN8TOARS.
    10.1007/s12289-018-1406-7
  18. Menezes, Luis. "Numerical study of springback using the split-ring test: influence of the clearance between the die and the punch". International Journal of Material Forming (2018):
    10.1007/s12289-017-1351-x
  19. Menezes, Luis. "Incremental volumetric and Dual Kriging remapping methods". Finite Elements in Analysis and Design (2018):
    10.1016/j.finel.2017.10.005
  20. Menezes, Luis; Netoa, D.M.; Martins, J.M.P.; Cunha, P.M.; Alves, J.L.; Oliveira, M.C.; Laurent, H.; Menezes, L.F.. "Thermo-mechanical finite element analysis of the AA5086 alloy under warm forming conditions". International Journal of Solids and Structures (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85095029273&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2017.06.011
  21. Menezes, Luis. "Study on the effect of tension-compression asymmetry on the cylindrical cup forming of an AA2090-T3 alloy". International Journal of Solids and Structures (2018):
    10.1016/j.ijsolstr.2017.06.034
  22. Menezes, Luis. "A new staggered algorithm for thermomechanical coupled problems". International Journal of Solids and Structures (2017):
    10.1016/j.ijsolstr.2017.06.002
  23. Menezes, Luis. "Influence of boundary conditions on the prediction of springback and wrinkling in sheet metal forming". International Journal of Mechanical Sciences (2017):
    10.1016/j.ijmecsci.2017.01.037
  24. Alves, J.L.; Oliveira, M.C.; Menezes, L.F.; Cazacu, O.. "The role of tension-compression asymmetry of the plastic flow on ductility and damage accumulation of porous polycrystals". Ciencia e Tecnologia dos Materiais 29 1 (2017): e234-e238. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021992996&partnerID=MN8TOARS.
    10.1016/j.ctmat.2016.06.006
  25. Neto, D.M.; Martins, J.M.P.; Oliveira, M.C.; Menezes, L.F.; Alves, J.L.. "Evaluation of strain and stress states in the single point incremental forming process". International Journal of Advanced Manufacturing Technology 85 1-4 (2016): 521-534. http://www.scopus.com/inward/record.url?eid=2-s2.0-84945232366&partnerID=MN8TOARS.
    10.1007/s00170-015-7954-9
  26. Neto, D.M.; Oliveira, M.C.; Menezes, L.F.; Alves, J.L.. "A contact smoothing method for arbitrary surface meshes using Nagata patches". Computer Methods in Applied Mechanics and Engineering 299 (2016): 283-315. http://www.scopus.com/inward/record.url?eid=2-s2.0-84948823207&partnerID=MN8TOARS.
    10.1016/j.cma.2015.11.011
  27. Barros, P.D.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "Modeling of tension-compression asymmetry and orthotropy on metallic materials: Numerical implementation and validation". International Journal of Mechanical Sciences 114 (2016): 217-232. http://www.scopus.com/inward/record.url?eid=2-s2.0-84973557250&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2016.05.020
  28. Martins, J.M.P.; Alves, J.L.; Neto, D.M.; Oliveira, M.C.; Menezes, L.F.. "Numerical analysis of different heating systems for warm sheet metal forming". International Journal of Advanced Manufacturing Technology 83 5-8 (2016): 897-909. http://www.scopus.com/inward/record.url?eid=2-s2.0-84959109201&partnerID=MN8TOARS.
    10.1007/s00170-015-7618-9
  29. Martins, J.M.P.; Neto, D.M.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "Numerical modeling of the thermal contact in metal forming processes". International Journal of Advanced Manufacturing Technology 87 5-8 (2016): 1797-1811. http://www.scopus.com/inward/record.url?eid=2-s2.0-84960363934&partnerID=MN8TOARS.
    10.1007/s00170-016-8571-y
  30. Neto, D.M.; Coër, J.; Oliveira, M.C.; Alves, J.L.; Manach, P.Y.; Menezes, L.F.. "Numerical analysis on the elastic deformation of the tools in sheet metal forming processes". International Journal of Solids and Structures 100-101 (2016): 270-285. http://www.scopus.com/inward/record.url?eid=2-s2.0-84994520017&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2016.08.023
  31. Bernard, C.; Coër, J.; Laurent, H.; Manach, P.Y.; Oliveira, M.; Menezes, L.F.. "Influence of Portevin-Le Chatelier Effect on Shear Strain Path Reversal in an Al-Mg Alloy at Room and High Temperatures". Experimental Mechanics (2016): 1-11. http://www.scopus.com/inward/record.url?eid=2-s2.0-84994718397&partnerID=MN8TOARS.
    10.1007/s11340-016-0229-z
  32. Barros, P.D.; Carvalho, P.D.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "DD3MAT - A code for yield criteria anisotropy parameters identification.". Journal of Physics: Conference Series 734 3 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84989234577&partnerID=MN8TOARS.
    10.1088/1742-6596/734/3/032053
  33. Martins, J.M.P.; Cunha, P.M.; Neto, D.M.; Alves, J.L.; Oliveira, M.C.; Laurent, H.; Menezes, L.F.. "A staggered coupling strategy for the finite element analysis of warm deep drawing process". Journal of Physics: Conference Series 734 3 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84989253898&partnerID=MN8TOARS.
    10.1088/1742-6596/734/3/032033
  34. Neto, D.M.; Diogo, C.M.A.; Neves, T.F.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Remapping algorithms: Application to trimming operations in sheet metal forming". Journal of Physics: Conference Series 734 3 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84989244677&partnerID=MN8TOARS.
    10.1088/1742-6596/734/3/032046
  35. Pedro Barros; José Luís Alves; Marta Oliveira; Luís Filipe Menezes; K. Saanouni. "Tension-compression asymmetry modelling: strategies for anisotropy parameters identification.". MATEC Web of Conferences 80 (2016): 05002-05002. https://doi.org/10.1051%2Fmatecconf%2F20168005002.
    10.1051/matecconf/20168005002
  36. Laurent, H.; Coër, J.; Manach, P.Y.; Oliveira, M.C.; Menezes, L.F.. "Experimental and numerical studies on the warm deep drawing of an Al-Mg alloy". International Journal of Mechanical Sciences 93 (2015): 59-72. http://www.scopus.com/inward/record.url?eid=2-s2.0-84921954415&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2015.01.009
  37. Neto, D.M.; Oliveira, M.C.; Dick, R.E.; Barros, P.D.; Alves, J.L.; Menezes, L.F.. "Numerical and experimental analysis of wrinkling during the cup drawing of an AA5042 aluminium alloy". International Journal of Material Forming (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84940704019&partnerID=MN8TOARS.
    10.1007/s12289-015-1265-4
  38. Neto, D.M.; Oliveira, M.C.; Menezes, L.F.. "Surface Smoothing Procedures in Computational Contact Mechanics". Archives of Computational Methods in Engineering (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84946771762&partnerID=MN8TOARS.
    10.1007/s11831-015-9159-7
  39. Khalfallah, A.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "Influence of the characteristics of the experimental data set used to identify anisotropy parameters". Simulation Modelling Practice and Theory 53 (2015): 15-44. http://www.scopus.com/inward/record.url?eid=2-s2.0-84924571569&partnerID=MN8TOARS.
    10.1016/j.simpat.2015.02.007
  40. Khalfallah, A.; Oliveira, M.C.; Alves, J.L.; Zribi, T.; Belhadjsalah, H.; Menezes, L.F.. "Mechanical characterization and constitutive parameter identification of anisotropic tubular materials for hydroforming applications". International Journal of Mechanical Sciences 104 (2015): 91-103. http://www.scopus.com/inward/record.url?eid=2-s2.0-84946228769&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2015.09.017
  41. Barros, P.D.; Baptista, A.J.; Alves, J.L.; Oliveira, M.C.; Rodrigues, D.M.; Menezes, L.F.. "Trimming of 3D solid finite element meshes: sheet metal forming tests and applications". Engineering with Computers 31 2 (2015): 237-257. http://www.scopus.com/inward/record.url?eid=2-s2.0-84925291213&partnerID=MN8TOARS.
    10.1007/s00366-013-0344-8
  42. Maia, A.; Oliveira, M.C.; Andrade-Campos, A.; Menezes, L.F.. "Sensitivity analysis for numerical sheet metal forming processes". 651-653 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84944189570&partnerID=MN8TOARS.
    10.4028/www.scientific.net/KEM.651-653.1369
  43. Neto, D.M.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Influence of the plastic anisotropy modelling in the reverse deep drawing process simulation". Materials and Design 60 (2014): 368-379. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899680139&partnerID=MN8TOARS.
    10.1016/j.matdes.2014.04.008
  44. Neto, D.M.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Comparing faceted and smoothed tool surface descriptions in sheet metal forming simulation". International Journal of Material Forming 8 4 (2014): 549-565. http://www.scopus.com/inward/record.url?eid=2-s2.0-84941169232&partnerID=MN8TOARS.
    10.1007/s12289-014-1177-8
  45. Neto, D.M.; Oliveira, M.C.; Menezes, L.F.; Alves, J.L.. "Applying Nagata patches to smooth discretized surfaces used in 3D frictional contact problems". Computer Methods in Applied Mechanics and Engineering 271 (2014): 296-320. http://www.scopus.com/inward/record.url?eid=2-s2.0-84893174743&partnerID=MN8TOARS.
    10.1016/j.cma.2013.12.008
  46. Barros, P.D.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Pre-strain effect on springback of 2D draw bending". International Journal of Materials Engineering Innovation 4 2 (2013): 187-211. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879031730&partnerID=MN8TOARS.
    10.1504/IJMATEI.2013.054395
  47. Neto, D.M.; Oliveira, M.C.; Menezes, L.F.; Alves, J.L.. "Nagata patch interpolation using surface normal vectors evaluated from the IGES file". Finite Elements in Analysis and Design 72 (2013): 35-46. http://www.scopus.com/inward/record.url?eid=2-s2.0-84879037605&partnerID=MN8TOARS.
    10.1016/j.finel.2013.03.004
  48. Coër, J.; Manach, P.Y.; Laurent, H.; Oliveira, M.C.; Menezes, L.F.. "Piobert-Lüders plateau and Portevin-Le Chatelier effect in an Al-Mg alloy in simple shear". Mechanics Research Communications 48 (2013): 1-7. http://www.scopus.com/inward/record.url?eid=2-s2.0-84871793041&partnerID=MN8TOARS.
    10.1016/j.mechrescom.2012.11.008
  49. Neto, D.M.; Oliveira, M.C.; Menezes, L.F.; Alves, J.L.. "Improving Nagata patch interpolation applied for tool surface description in sheet metal forming simulation". CAD Computer Aided Design 45 3 (2013): 639-656. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870806464&partnerID=MN8TOARS.
    10.1016/j.cad.2012.10.046
  50. Oliveira, M.C.; Alves, J.L.; Menezes, L.F.; Ito, K.; Mori, N.; Buco, BD; Oliveira, MC; et al. "Local bifurcation and instability theory applied to formability analysis". International Journal of Material Forming 4 3 (2011): 347-356. http://www.scopus.com/inward/record.url?eid=2-s2.0-80051947013&partnerID=MN8TOARS.
    10.1007/s12289-010-1019-2
  51. Figueiredo, L; Ramalho, A; Oliveira, MC; Menezes, LF. "Experimental study of friction in sheet metal forming". Wear 271 9-10 (2011): 1651-1657.
    10.1016/j.wear.2011.02.020
  52. Grze, R.; Manach, P.Y.; Laurent, H.; Thuillier, S.; Menezes, L.F.. "Influence of the temperature on residual stresses and springback effect in an aluminium alloy". International Journal of Mechanical Sciences 52 9 (2010): 1094-1100. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955303324&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2010.04.008
  53. Kolevska, A.; Padmanabhan, R.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Finite element analysis of the influence of the restraining force in the draw bend test". International Journal of Material Forming 3 SUPPL. 1 (2010): 143-146. http://www.scopus.com/inward/record.url?eid=2-s2.0-78651567934&partnerID=MN8TOARS.
    10.1007/s12289-010-0727-y
  54. Pereira, F.I.; Oliveira, M.C.; Ramalho, A.; Alves, J.L.; Menezes, L.F.; Padmanabhan, R.. "Finite element analysis on the influence of material mechanical properties in local contact conditions". International Journal of Material Forming 3 SUPPL. 1 (2010): 139-142. http://www.scopus.com/inward/record.url?eid=2-s2.0-78651547638&partnerID=MN8TOARS.
    10.1007/s12289-010-0726-z
  55. Fernandes, JV; Antunes, JM; Sakharova, NA; Oliveira, MC; Menezes, LF. "Young's modulus of thin films using depth-sensing indentation". Philosophical Magazine Letters 90 1 (2010): 9-22.
    10.1080/09500830903334312
  56. Laurent, H; Greze, R; Oliveira, MC; Menezes, LF; Manach, PY; Alves, JL. "Numerical study of springback using the split-ring test for an AA5754 aluminum alloy". Finite Elements in Analysis and Design 46 9 (2010): 751-759.
    10.1016/j.finel.2010.04.004
  57. Thuillier, S; Manach, PY; Menezes, LF. "Occurence of strain path changes in a two-stage deep drawing process". Journal of Materials Processing Technology 210 2 (2010): 226-232.
    10.1016/j.jmatprotec.2009.09.004
  58. Neto, DM; Oliveira, MC; Alves, JL; Menezes, LF; Barlat, F; Moon, YH; Lee, MG. "Local Interpolation for Tools Surface Description". Numiform 2010, Vols 1 and 2 1252 (2010): 479-486.
    10.1063/1.3457593
  59. Rodrigues, DM; Leitao, C; Menezes, LF. "A multi-step analysis for determining admissible blank-holder forces in deep-drawing operations". Materials & Design 31 3 (2010): 1475-1481.
    10.1016/j.matdes.2009.08.028
  60. Hammami, W.; Padmanabhan, R.; Oliveira, M.C.; Belhadjsalah, H.; Alves, J.L.; Menezes, L.F.. "A deformation based blank design method for formed parts". International Journal of Mechanics and Materials in Design 5 4 (2009): 303-314. http://www.scopus.com/inward/record.url?eid=2-s2.0-74249093375&partnerID=MN8TOARS.
    10.1007/s10999-009-9103-9
  61. Padmanabhan, R.; Oliveira, M.C.; Laurent, H.; Alves, J.L.; Menezes, L.F.. "Study on springback in deep drawn tailor welded blanks". International Journal of Material Forming 2 SUPPL. 1 (2009): 829-832. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856058367&partnerID=MN8TOARS.
    10.1007/s12289-009-0566-x
  62. Padmanabhan, R.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Stochastic analysis of a deep drawing process using finite element simulations". International Journal of Material Forming 2 SUPPL. 1 (2009): 347-350. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856065791&partnerID=MN8TOARS.
    10.1007/s12289-009-0565-y
  63. Oliveira, M.C.; Padmanabhan, R.; Baptista, A.J.; Alves, J.L.; Menezes, L.F.. "Sensitivity study on some parameters in blank design". Materials and Design 30 4 (2009): 1223-1230. http://www.scopus.com/inward/record.url?eid=2-s2.0-57349199259&partnerID=MN8TOARS.
    10.1016/j.matdes.2008.06.010
  64. Padmanabhan, R.; Oliveira, M.C.; Baptista, A.J.; Alves, J.L.; Menezes, L.F.; Padmanabhan, R; Oliveira, MC; et al. "Numerical study on the influence of initial anisotropy on optimal blank shape". Finite Elements in Analysis and Design 45 2 (2009): 71-80. http://www.scopus.com/inward/record.url?eid=2-s2.0-56949103017&partnerID=MN8TOARS.
    10.1016/j.finel.2008.07.012
  65. Padmanabhan, R; Oliveira, MC; Baptista, AJ; Alves, JL; Menezes, LF; Padmanabhan, R.; Oliveira, M.C.; et al. "Blank design for deep drawn parts using parametric NURBS surfaces". Journal of Materials Processing Technology 209 5 (2009): 2402-2411. http://www.scopus.com/inward/record.url?eid=2-s2.0-59549104569&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2008.05.035|10.1016/j.jmatprotec.2008.05.035
  66. Padmanabhan, R.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Numerical simulation and analysis on the deep drawing of LPG bottles". Journal of Materials Processing Technology 200 1-3 (2008): 416-423. http://www.scopus.com/inward/record.url?eid=2-s2.0-39849107327&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2007.08.047
  67. Padmanabhan, R.; Sung, J.; Lim, H.; Oliveira, M.C.; Menezes, L.F.; Wagoner, R.H.. "Influence of draw restraining force on the springback in advanced high strength steels". International Journal of Material Forming 1 SUPPL. 1 (2008): 177-180. http://www.scopus.com/inward/record.url?eid=2-s2.0-78651563273&partnerID=MN8TOARS.
    10.1007/s12289-008-0020-5
  68. Antunes, J.M.; Fernandes, J.V.; Sakharova, N.A.; Menezes, L.F.. "Reverse analysis in depth-sensing indentation for evaluation of the Young's modulus of thin films". Philosophical Magazine 88 3 (2008): 313-325. http://www.scopus.com/inward/record.url?eid=2-s2.0-39149103357&partnerID=MN8TOARS.
    10.1080/14786430701832404
  69. Padmanabhan, R.; Oliveira, M.C.; Menezes, L.F.. "Deep drawing of aluminium-steel tailor-welded blanks". Materials and Design 29 1 (2008): 154-160. http://www.scopus.com/inward/record.url?eid=2-s2.0-34548695644&partnerID=MN8TOARS.
    10.1016/j.matdes.2006.11.007
  70. Chaparro, BM; Thuillier, S; Menezes, LF; Manach, PY; Fernandes, JV; Chaparro, B.M.; Thuillier, S.; et al. "Material parameters identification: Gradient-based, genetic and hybrid optimization algorithms". Computational Materials Science 44 2 (2008): 339-346. http://www.scopus.com/inward/record.url?eid=2-s2.0-55849091787&partnerID=MN8TOARS.
    10.1016/j.commatsci.2008.03.028|10.1016/j.commatsci.2008.03.028
  71. Oliveira, MC; Alves, JL; Menezes, LF; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Algorithms and strategies for treatment of large deformation frictional contact in the numerical simulation of deep drawing process". Archives of Computational Methods in Engineering 15 2 (2008): 113-162. http://www.scopus.com/inward/record.url?eid=2-s2.0-56749131810&partnerID=MN8TOARS.
    10.1007/s11831-008-9018-x|10.1007/s11831-008-9018-x
  72. Oliveira, M.C.; Alves, J.L.; Chaparro, B.M.; Menezes, L.F.; Oliveira, MC; Alves, JL; Chaparro, BM; Menezes, LF. "Study on the influence of work-hardening modeling in springback prediction". International Journal of Plasticity 23 3 (2007): 516-543. http://www.scopus.com/inward/record.url?eid=2-s2.0-33845328772&partnerID=MN8TOARS.
    10.1016/j.ijplas.2006.07.003
  73. Padmanabhan, R.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Influence of process parameters on the deep drawing of stainless steel". Finite Elements in Analysis and Design 43 14 (2007): 1062-1067. http://www.scopus.com/inward/record.url?eid=2-s2.0-35148856302&partnerID=MN8TOARS.
    10.1016/j.finel.2007.06.011
  74. Antunes, J.M.; Fernandes, J.V.; Sakharova, N.A.; Oliveira, M.C.; Menezes, L.F.; Antunes, JM; Fernandes, JV; et al. "On the determination of the Young's modulus of thin films using indentation tests". International Journal of Solids and Structures 44 25-26 (2007): 8313-8334. http://www.scopus.com/inward/record.url?eid=2-s2.0-35548945419&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2007.06.015
  75. Padmanabhan, R; Baptista, AJ; Oliveira, MC; Menezes, LF; Padmanabhan, R.; Baptista, A.J.; Oliveira, M.C.; Menezes, L.F.. "Effect of anisotropy on the deep-drawing of mild steel and dual-phase steel tailor-welded blanks". Journal of Materials Processing Technology 184 1-3 (2007): 288-293. http://www.scopus.com/inward/record.url?eid=2-s2.0-33846804007&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2006.11.051|10.1016/j.jmatprotec.2006.11.051
  76. Antunes, JM; Fernandes, JV; Menezes, LF; Chaparro, BM; Antunes, J.M.; Fernandes, J.V.; Menezes, L.F.; Chaparro, B.M.. "A new approach for reverse analyses in depth-sensing indentation using numerical simulation". Acta Materialia 55 1 (2007): 69-81. http://www.scopus.com/inward/record.url?eid=2-s2.0-33751505853&partnerID=MN8TOARS.
    10.1016/j.actamat.2006.08.019|10.1016/j.actamat.2006.08.019
  77. Antunes, J.M.; Menezes, L.F.; Fernandes, J.V.. "Influence of Vickers tip imperfection on depth sensing indentation tests". International Journal of Solids and Structures 44 9 (2007): 2732-2747. http://www.scopus.com/inward/record.url?eid=2-s2.0-33947123264&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2006.08.017
  78. Antunes, J.M.; Sakharova, N.A.; Fernandes, J.V.; Menezes, L.F.. "Strain and stress distribution in vickers indentation of coated materials". Materials Science Forum 514-516 PART 2 (2006): 1472-1476. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849033155&partnerID=MN8TOARS.
  79. Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Evolutional friction law in the numerical simulation of the deep drawing of a rail". Materials Science Forum 514-516 PART 2 (2006): 1443-1447. http://www.scopus.com/inward/record.url?eid=2-s2.0-37849014862&partnerID=MN8TOARS.
  80. Andrade-Campos, A.; Menezes, L.F.; Teixeira-Dias, F.. "Numerical analysis of large deformation processes at elevated temperatures". Computer Methods in Applied Mechanics and Engineering 195 33-36 (2006): 3947-3959. http://www.scopus.com/inward/record.url?eid=2-s2.0-33646201371&partnerID=MN8TOARS.
    10.1016/j.cma.2005.07.023
  81. Antunes, J.M.; Menezes, L.F.; Fernandes, J.V.. "Three-dimensional numerical simulation of Vickers indentation tests". International Journal of Solids and Structures 43 3-4 (2006): 784-806. http://www.scopus.com/inward/record.url?eid=2-s2.0-28244456748&partnerID=MN8TOARS.
    10.1016/j.ijsolstr.2005.02.048
  82. Baptista, A.J.; Rodrigues, D.M.; Menezes, L.F.. "Influence of the weld on the mechanical behaviour of tailor welded blanks". Materials Science Forum 514-516 PART 2 (2006): 1493-1497. http://www.scopus.com/inward/record.url?eid=2-s2.0-33846817834&partnerID=MN8TOARS.
  83. Baptista, A.J.; Alves, J.L.; Rodrigues, D.M.; Menezes, L.F.. "Trimming of 3D solid finite element meshes using parametric surfaces: Application to sheet metal forming". Finite Elements in Analysis and Design 42 12 (2006): 1053-1060. http://www.scopus.com/inward/record.url?eid=2-s2.0-33745399278&partnerID=MN8TOARS.
    10.1016/j.finel.2006.03.005
  84. Bouvier, S.; Alves, J.L.; Menezes, L.F.; Oliveira, M.C.. "Characterizing the plastic anisotropy and its effect on sheet metal forming simulation". Computational Plasticity: Fundamentals and Applications - Proceedings of the 8th International Conference on Computational Plasticity, COMPLAS VIII PART 1 (2005): 291-294. http://www.scopus.com/inward/record.url?eid=2-s2.0-84857183858&partnerID=MN8TOARS.
  85. Bouvier, S.; Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "Modelling of anisotropic work-hardening behaviour of metallic materials subjected to strain-path changes". Computational Materials Science 32 3-4 (2005): 301-315. http://www.scopus.com/inward/record.url?eid=2-s2.0-12444252153&partnerID=MN8TOARS.
    10.1016/j.commatsci.2004.09.038
  86. Rodrigues, D.M.; Menezes, L.F.; Loureiro, A.. "Modelling the effect of HAZ undermatching on the crack-tip stress distribution in idealized welds". International Journal of Mechanical Sciences 46 10 (2004): 1481-1488. http://www.scopus.com/inward/record.url?eid=2-s2.0-9644252873&partnerID=MN8TOARS.
    10.1016/j.ijmecsci.2004.09.009
  87. Rodrigues, D.M.; Menezes, L.F.; Loureiro, A.. "The influence of the HAZ softening on the mechanical behaviour of welded joints containing cracks in the weld metal". Engineering Fracture Mechanics 71 13-14 (2004): 2053-2064. http://www.scopus.com/inward/record.url?eid=2-s2.0-1842634252&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2003.09.002
  88. Santos, A.D.; Reis, A.; Duarte, J.F.; Teixeira, P.; Rocha, A.B.; Oliveira, M.C.; Alves, J.L.; Menezes, L.. "A benchmark for validation of numerical results in sheet metal forming". Journal of Materials Processing Technology 155-156 1-3 (2004): 1980-1985. http://www.scopus.com/inward/record.url?eid=2-s2.0-10044270753&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2004.04.290
  89. Andrade-Campos, A.; Menezes, L.F.; Teixeira-Dias, F.. "Large deformation processes on AA1050-O aluminium at elevated temperatures". Materials Science Forum 455-456 (2004): 723-727. http://www.scopus.com/inward/record.url?eid=2-s2.0-16744368604&partnerID=MN8TOARS.
  90. Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Numerical analysis on the effects of the friction coefficient on the deep drawing of a rail". Materials Science Forum 455-456 (2004): 737-741. http://www.scopus.com/inward/record.url?eid=2-s2.0-16744363686&partnerID=MN8TOARS.
  91. Oliveira, M.C.; Menezes, L.F.. "Automatic correction of the time step in implicit simulations of the stamping process". Finite Elements in Analysis and Design 40 13-14 (2004): 1995-2010. http://www.scopus.com/inward/record.url?eid=2-s2.0-3142647430&partnerID=MN8TOARS.
    10.1016/j.finel.2004.01.009
  92. Antunes, J.M.; Menezes, L.F.; Fernandes, J.V.; Simões, M.I.. "Numerical simulation of ultramicrohardness tests in thin films". Materials Science Forum 455-456 (2004): 694-698. http://www.scopus.com/inward/record.url?eid=2-s2.0-16744362677&partnerID=MN8TOARS.
  93. Alves, J.L.; Oliveira, M.C.; Menezes, L.F.. "Springback evaluation with several phenomenological yield criteria". Materials Science Forum 455-456 (2004): 732-736. http://www.scopus.com/inward/record.url?eid=2-s2.0-16744365783&partnerID=MN8TOARS.
  94. Rodrigues, D.M.; Menezes, L.F.; Loureiro, A.; Fernandes, J.V.. "Numerical study of the plastic behaviour in tension of welds in high strength steels". International Journal of Plasticity 20 1 (2004): 1-18. http://www.scopus.com/inward/record.url?eid=2-s2.0-0141458111&partnerID=MN8TOARS.
    10.1016/S0749-6419(02)00112-2
  95. Rodrigues, D.M.; Menezes, L.F.; Loureiro, A.. "An investigation of the influence of strength mis-matching and HAZ width on the fracture behaviour of welds with cracks in the WM/HAZ interface". Materials Science Forum 455-456 (2004): 685-689. http://www.scopus.com/inward/record.url?eid=2-s2.0-16744362581&partnerID=MN8TOARS.
  96. Chaparro, B.M.; Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Work hardening models and the numerical simulation of the deep drawing process". Materials Science Forum 455-456 (2004): 717-722. http://www.scopus.com/inward/record.url?eid=2-s2.0-16744368564&partnerID=MN8TOARS.
  97. Oliveira, M.C.; Alves, J.L.; Menezes, L.F.. "Improvement of a frictional contact algorithm for strongly curved contact problems". International Journal for Numerical Methods in Engineering 58 14 (2003): 2083-2101. http://www.scopus.com/inward/record.url?eid=2-s2.0-0346152781&partnerID=MN8TOARS.
    10.1002/nme.845
  98. Antunes, JM; Menezes, LF; Vieira, MF; Fernandes, JV; Trindade, B; Ramos, AS; Vieira, MT. "On the evaluation of the ductility of thin films". Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing 337 1-2 (2002): 97-103.
    10.1016/S0921-5093(01)01991-8
  99. Antunes, J.M.; Menezes, L.F.; Fernandes, J.V.. "Numerical study of the influence of imperfection of the tip of a vickers indenter on ultramicrohardness test results". Key Engineering Materials 230-232 (2002): 525-528. http://www.scopus.com/inward/record.url?eid=2-s2.0-17644429788&partnerID=MN8TOARS.
  100. Thuillier, S.; Alves, J.L.; Menezes, L.F.; Manach, P.Y.. "Comparison of experimental and simulated results for a mild steel and a dual-phase steel deformed under tension and deep-drawing". Key Engineering Materials 230-232 (2002): 549-552. http://www.scopus.com/inward/record.url?eid=2-s2.0-18744418391&partnerID=MN8TOARS.
  101. Louro, C.; Teixeira-Dias, F.; Menezes, L.F.; Cavaleiro, A.. "Effect of the substrate thermal expansion coefficient on the thermal residual stresses in W-Si-N sputtered films". Key Engineering Materials 230-232 (2002): 513-516. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036436547&partnerID=MN8TOARS.
  102. Santos, A.D.; Ferreira Duarte, J.; Reis, A.; Barata da Rocha, A.; Menezes, L.; Oliveira, M.; Col, A.; Ono, T.. "Towards standard benchmarks and reference data for validation and improvement of numerical simulation in sheet metal forming". Journal of Materials Processing Technology 125-126 (2002): 798-805. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037047945&partnerID=MN8TOARS.
    10.1016/S0924-0136(02)00395-3
  103. Manach, P.Y.; Oliveira, M.C.; Thuillier, S.; Menezes, L.F.. "Reverse deep drawing: Experimental and numerical simulation results". Key Engineering Materials 230-232 (2002): 541-544. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036432403&partnerID=MN8TOARS.
  104. Rodrigues, D.M.; Menezes, L.F.; Loureiro, A.; Fernandes, J.V.. "Influence of plastic deformation of the heat affected zone on the mechanical behaviour of welds in high strength steels". Key Engineering Materials 233-236 II (2002): 791-796. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036949857&partnerID=MN8TOARS.
  105. Antunes, J.M.; Cavaleiro, A.; Menezes, L.F.; Simões, M.I.; Fernandes, J.V.. "Ultra-microhardness testing procedure with Vickers indenter". Surface and Coatings Technology 149 1 (2002): 27-35. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036147452&partnerID=MN8TOARS.
    10.1016/S0257-8972(01)01413-X
  106. Thuillier, S.; Manach, P.Y.; Menezes, L.F.; Oliveira, M.C.. "Experimental and numerical study of reverse re-drawing of anisotropic sheet metals". Journal of Materials Processing Technology 125-126 (2002): 764-771. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037047814&partnerID=MN8TOARS.
    10.1016/S0924-0136(02)00387-4
  107. Teixeira-Dias, F.; Menezes, L.F.. "A kinematic and incremental integration model for the micromechanical numerical analysis of dual-phase materials". Computational Materials Science 25 1-2 (2002): 237-245. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036713293&partnerID=MN8TOARS.
    10.1016/S0927-0256(02)00268-9
  108. Teixeira-Dias, F.; Menezes, L.F.. "Numerical determination of the influence of the cooling rate and reinforcement volume fraction on the levels of residual stresses in Al-SiC composites". Computational Materials Science 21 1 (2001): 26-36. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034916538&partnerID=MN8TOARS.
    10.1016/S0927-0256(00)00213-5
  109. Teixeira-Dias, F.; Menezes, L.F.. "Numerical aspects of finite element simulations of residual stresses in metal matrix composites". International Journal for Numerical Methods in Engineering 50 3 (2001): 629-644. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034746033&partnerID=MN8TOARS.
    10.1002/1097-0207(20010130)50:3<629::AID-NME41>3.0.CO;2-7
  110. Fernandes, J.V.; Trindade, A.C.; Menezes, L.F.; Cavaleiro, A.. "Influence of substrate hardness on the response of W-C-Co-coated samples to depth-sensing indentation". Journal of Materials Research 15 8 (2000): 1766-1772. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034256156&partnerID=MN8TOARS.
  111. Fernandes, J.-V.; Menezes, L.F.; Rodrigues, D.M.; Chaparro, B.M.; Vieira, M.F.. "Non-uniform deformation after prestrain". European Journal of Mechanics, A/Solids 19 2 (2000): 209-221. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034156749&partnerID=MN8TOARS.
    10.1016/S0997-7538(99)00146-1
  112. Fernandes, J.V.; Trindade, A.C.; Menezes, L.F.; Cavaleiro, A.. "A model for coated surface hardness". Surface and Coatings Technology 131 1-3 (2000): 457-461. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034535263&partnerID=MN8TOARS.
    10.1016/S0257-8972(00)00839-2
  113. Menezes, L.F.; Teodosiu, C.. "Three-dimensional numerical simulation of the deep-drawing process using solid finite elements". Journal of Materials Processing Technology 97 1-3 (2000): 100-106. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033877050&partnerID=MN8TOARS.
    10.1016/S0924-0136(99)00345-3
  114. Menezes, L.F.; Fernandes, J.V.; Rodrigues, D.M.; Menezes, LF; Fernandes, JV; Rodrigues, DM. "Numerical simulation of tensile tests of prestrained sheets". Materials Science and Engineering A 264 1-2 (1999): 130-138. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032664805&partnerID=MN8TOARS.
    10.1016/S0921-5093(98)01104-6
  115. Fernandes, J.V.; Rodrigues, D.M.; Menezes, L.F.; Vieira, M.F.. "A modified Swift law for prestrained materials". International Journal of Plasticity 14 6 (1998): 537-550. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032321095&partnerID=MN8TOARS.
  116. Fernandes, J.V.; Menezes, L.F.; Trindade, A.C.; Fernandes, JV; Menezes, LF; Trindade, AC. "The coated surface hardness: A kinematic model". Thin Solid Films 335 1-2 (1998): 153-159. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032318147&partnerID=MN8TOARS.
    10.1016/S0040-6090(98)00864-5
  117. Suéry, M.; Teodosiu, C.; Menezes, L.F.. "Thermal residual stresses in particle-reinforced viscoplastic metal matrix composites". Materials Science and Engineering A 167 1-2 (1993): 97-105. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027642966&partnerID=MN8TOARS.
    10.1016/0921-5093(93)90342-C
  118. DELIMA, AP; GIL, CL; MARTINS, DR; DECAMPOS, NA; MENEZES, LF; FERNANDES, JV. "POSITRON STUDIES IN POLYCRYSTALLINE DEFORMED COPPER". Crystal Research and Technology 22 11 (1987): K185-K190.
    10.1002/crat.2170221123
Preface / Postscript
  1. Simões, Carlota; Menezes, Luis. "As Luzes Ilustradas". Preface to O Segredo de Coimbra, (Étienne Schréder, autor), 4-5. Coimbra, Portugal. 2016.
    Published

Other

Other output
  1. Detailed experimental and numerical analysis of a cylindrical cup deep drawing: Pros and cons of using solid-shell elements. International Journal of Material Forming. 2017. Coër, J.; Laurent, H.; Oliveira, M.C.; Manach, P.-Y.; Menezes, L.F.; Menezes, Luis. http://www.scopus.com/inward/record.url?eid=2-s2.0-85092828285&partnerID=MN8TOARS.
    10.1007/s12289-017-1357-4
Activities

Committee member

Activity description
Role
Institution / Organization
2013/09 - 2019/02/28 Vice Reitor da Universidade de Coimbra
President / Vice-president
2005 - 2013 Vice-Diretor fa Faculdade de Ciências e Tecnologia da Universidade de Coimbra
President / Vice-president
2005 - 2011 Presidente do Centro de Engenharia Mecânica da Universidade de Coimbra
President / Vice-president
Centro de Estudos Arqueológicos das Universidades de Coimbra e Porto, Portugal

Consulting

Activity description Institution / Organization
2000 - Current Membro dos paineis de avaliação de projetos da Agência Nacional de Inovação desde 2000.

Evaluation committee

Activity description
Role
Institution / Organization Funding entity
2012 - Current Membro dos paineis de avaliação de Engenharia Mecânica dos programas de bolsas de doutoramento da Fundação para a Ciência e Tecnologia (FCT) desde 2012
Evaluator
2020 - 2023/12/31 Coordenador do painel de avaliação de engenharia mecânica dos Relatórios Científicos Finais (RCF) dos projetos financiados pela Fundação para a Ciência e Tecnologia (FCT)
Coordinator
2020 - 2021 Coordenador dos paineis de avaliação de Engenharia Mecânica dos programas de bolsas de doutoramento da Fundação para a Ciência e Tecnologia (FCT) em 2020 e 2021.
Coordinator