???global.info.a_carregar???
Michael Gasik. M.Sc. (Diploma Eng. with Honour) in Electrometallurgy in 1983 by National Metallurgical Academy of Ukraine and Cand. Techn. Sci. (PhD) in 1987 by National University - Moscow Institute of Steel and Alloys. Completed degrees of Dr. Techn. in Materials processing and powder metallurgy in 1995 by Helsinki University of Technology (TKK) and Dr. Sci. Techn. in powder metallurgy and composite materials in 2000 by Metallurgy and Materials Science RAN Institute A A Bajkova, MIchael Gasik is recently a Full Professor of Aalto University, School of Chemical Engineering in Espoo, Finland. He is additionally Invited Coordinator Researcher in Universidade do Minho Centro de Sistemas Microeletromecânicos (CMEMS). Published 131 articles in peer-reviewed journals and 130 articles in conference proceedings. Has 15 books and book chapters and about 70 other publications and patents. Has received 8 awards and/or honors. Works in the area(s) of Engineering and Technology with emphasis on Materials Engineering, Medical Biotechnology (Biomaterials), Chemical Sciences and Engineering and Technology and Biomedical Engineering. In their professional activities interacted with 129 collaborator(s) co-authorship of scientific papers. In his curriculum Ciência Vitae the most frequent terms in the context of scientific, technological and artistic-cultural output are: biomaterials; ceramics; metals; titanium; implants; electrometallurgy; ferroalloys; superalloys; non-ferrous alloys; modelling; inorganic chemistry; thermodynamics; kinetics; thermal analysis; powder metallurgy; orthopaedics; dental implants; scaffolds; tissue engineering; biomaterials evaluation. Permanent member (representative of Finland) in The International Advisory Committee on Functional Graded Materials (Japan); International Energy Agency, ExCo meeting of Hydrogen Implementation Agreement (Washington DC, USA); EU COST Actions (MP1005, MP1301, CA17116); Technet Alliance (Germany). He is also a member of the Association of Mining and Metallurgical Engineers of Finland; Japanese Society for Promotion of Science - Alumni Association Finland; Full member of the Academy of Sciences of the Highest Education, Ukraine; European Orthopaedic Research Society (EORS); European Connected Health Alliance (ECHA); Tissue engineering and regenerative medicine international society, EU chapter. He has supervised 16 doctorate theses; 36 Master Theses and 16 B.Sc. Theses. He recently acts also as the Head of the M.Sc. major study program (Aalto University, School of Chemical Engineering); Manager of “AllWell” students wellbeing quality program and as a Member of the Academic Council, Aalto University, School of Chemical Engineering. He has received professional credits in orthopaedics (University of Bristol, UK, 2015, and via Bavarian State Chamber of Physicians - Bayerishe Landesärtzekammer, Munich, 2017). His reviewer work comprises EU framework programs, Brussels (1993-), REA Research for the Benefits of SMEs (2010-2015), Marie Curie Actions (2012-2014), ERANET (2009-2014), CleanSky Joint Undertaking (2011-2013); as well as national foundations in Portugal, Spain, Estonia, Cyprus, Luxembourg.
Read full resume ↓
Identification

Personal identification

Full name
Michael Gasik

Citation names

  • Gasik, Michael

Author identifiers

Ciência ID
AC16-97DA-CD68
ORCID iD
0000-0002-5782-7987
Researcher Id
G-2224-2013

Knowledge fields

  • Engineering and Technology - Materials Engineering
  • Medical and Health Sciences - Medical Biotechnology - Biomaterials
  • Exact Sciences - Chemical Sciences
  • Engineering and Technology - Medical Engineering - Medical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Finnish Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
English Proficiency (C2) Advanced (C1) Advanced (C1) Proficiency (C2)
Ukrainian Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2)
Russian Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2)
Swedish Beginner (A1) Intermediate (B1) Beginner (A1) Beginner (A1)
Polish Beginner (A1) Intermediate (B1) Beginner (A1) Elementary (A2)
Italian Beginner (A1) Elementary (A2) Beginner (A1) Elementary (A2) Beginner (A1)
Education
Degree Classification
1998 - 2000
Concluded
 Powder metallurgy and composite materials (Doctor)
Institut metallurgii i materialovedenia imeni A A Bajkova RAN, Russia
"Basics of technology of anisotropic systems and functiona graded materials" (THESIS/DISSERTATION)
 Doctor Technical Sciences
1992 - 1995
Concluded
 Materials processing (Tohtori)
Helsinki Universtity of Technology, Finland
"Principles of Functional Gradient materials and their processing by powder metallurgy" (THESIS/DISSERTATION)
 Doctor of Technology (D.Sci)
1987 - 1987
Concluded
 Metallurgy of Ferroys Alloys (Doktor (PhD))
Moscow Institute of Steel and Alloys, Russia
"Technology principles of ferro-molybdenum powder master alloy" (THESIS/DISSERTATION)
 Candidate of Technical Sciences
1978 - 1983
Concluded
 Electrometallurgy (Laurea Magistrale)
National Metallurgical Academy of Ukraine, Ukraine
"Devlopment of the production plant for fabriation of metallic manganese" (THESIS/DISSERTATION)
 Diploma engineer
Affiliation

Science

Category
Host institution 		Employer
2015 - Current Auxiliary Researcher (Research) Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
1991/03/01 - 1991/08/01 Visiting Researcher (Research) The University of Manchester, United Kingdom

Teaching in Higher Education

Category
Host institution 		Employer
2010/01/02 - Current Full Professor (University Teacher) Aalto University School of Chemical Engineering, Finland
1998/02/01 - 2009/12/31 Full Professor (University Teacher) Helsinki University of Technology (TKK), Finland
1993/09/01 - 1998/01/31 Assistant Professor (University Teacher) Helsinki University of Technology (TKK), Finland
1987 - 1992 Assistant Professor (University Teacher) Dnipropertrovsk Metallurgical Institute, Ukraine

Others

Category
Host institution 		Employer
2016/09/01 - 2018/04/30 Visiting Professor (Biomaterials) Università degli Studi del Piemonte Orientale 'Amedeo Avogadro' Dipartimento di Scienze della Salute, Italy
1998/03/01 - 1998/04/01 Visiting Research Fellow (The Japan Society of Promotion of Science) Tohoku Daigaku, Japan
Projects

Grant

Designation Funders
2020/01/01 - 2024/09/30 Precision medicine for muscolo-skeletal regeneration, prosthetics and active ageing
PREMUROSA
Supervisor
Aalto-yliopisto Kemian tekniikan korkeakoulu, Finland
 European Commission
Ongoing
2020/11/01 - 2024/04/30 Twinning to excel materials engineering for medical devices – ExcellMater
952033
Supervisor
Aalto-yliopisto Kemian tekniikan korkeakoulu, Finland

Università degli Studi del Piemonte Orientale 'Amedeo Avogadro' Dipartimento di Scienze della Salute, Italy

AO Foundation, Switzerland

Univerzitet u Beogradu Tehnolo¿ko-Metalur¿kom Fakultetu, Serbia
EU Framework Programme for Research and Innovation Nanotechnologies Advanced Materials Advanced Manufacturing and Processing and Biotechnology
Ongoing
2018 - 2022 International Network for Translating Research on Perinatal Derivatives into Therapeutic Approaches
SPRINT
Supervisor
Aalto-yliopisto Kemian tekniikan korkeakoulu, Finland
 European Research Council
Ongoing
2018 - 2022 Personalised and/or generalised integrated biomaterial risk assessment
PANBIORA
Supervisor
Aalto-yliopisto Kemian tekniikan korkeakoulu, Finland
Ongoing
2016 - 2017 New materials for virology diagnostics and applications
VIROGAIN
Invited Scientist Fellow
Tallinna Tehnikaülikool, Estonia
Concluded
2015 - 2017 New generation biomimetic and customized implants for bone engineering
NEWGEN
Supervisor
Aalto-yliopisto Kemian tekniikan korkeakoulu, Finland
Concluded
2014 - 2016 Graphene-augmented nano-fibrous scaffolds
ULTRINIA
Invited Scientist Fellow
Tallinna Tehnikaülikool, Estonia
Concluded
2013 - 2016 Solar-to-hydrogen hybrid cycles
SOL2HY2
Supervisor
Helsinki University of Technology (TKK), Finland
Concluded
2013/01 - 2015/12 Multi-material laser sintering for the production of Functional Graded Structures
Provided by PTCRIS: 129123
 Fundação para a Ciência e a Tecnologia
2013 - 2015 From Nano to Macro Biomaterials (design, processing, characterization, modelling) and applications to stem cells regenerative orthopaedic and dental medicine
NAMABIO
Supervisor
Aalto-yliopisto Kemian tekniikan korkeakoulu, Finland
Concluded
2012 - 2015 Novel alumina-based nanofibers with ultra-high aspect ratio
Achimedes
Other
Tallinna Tehnikaülikool, Estonia
Concluded
2007 - 2012 Continuous hydrogen production by electrolysis with advanced cycles
JAVE
Supervisor
Helsinki University of Technology (TKK), Finland
Concluded
2006 - 2011 Multifunctional bioresorbable biocompatible coatings with biofilm inhibition and optimal implant fixation
MEDDELCOAT
Supervisor
Helsinki University of Technology (TKK), Finland
Concluded
2007 - 2010 Materials Solutions for PEM fuel cells
MARAPOKE
Supervisor
Helsinki University of Technology (TKK), Finland
Concluded
2007 - 2010 Solid Oxide Fuel Cell - from development to demonstration
FINSOFC
Supervisor
Helsinki University of Technology (TKK), Finland
Concluded
2006 - 2010 New automotive components designed for and manufactured by intelligent processing of light alloys
NADIA
Supervisor
Helsinki University of Technology (TKK), Finland
Concluded
2004 - 2009 Intermetallic materials processing in relation to Earth and space solidification
IMPRESS
Supervisor
Helsinki University of Technology (TKK), Finland
Concluded
2005 - 2008 Nanostructured powders development and application in coatings and components
NANOPINKO
Supervisor
Helsinki University of Technology (TKK), Finland
Concluded
2005 - 2008 Design of highly conductive solid thin film electrolyte for stack integration within the optical and energy storage applications
HI-CONDELEC
Supervisor
Helsinki University of Technology (TKK), Finland
Concluded
2004 - 2006 Distributed hydrogen energy systems
THETA
Supervisor
Helsinki University of Technology (TKK), Finland
Concluded
2001 - 2005 Increasing the performance of total hip replacement prostheses through functionally graded materials innovation and design
BIOGRAD
Supervisor
Helsinki University of Technology (TKK), Finland
Concluded
2001 - 2003 Development of advanced coatings technology
NIHON
Supervisor
Helsinki University of Technology (TKK), Finland
Concluded
1997 - 2001 Graded materials manufactured by electrophoresis for tribological applications
TRIBOGRAD
Supervisor
Helsinki University of Technology (TKK), Finland

Contract

Designation Funders
2007 - 2011 Development and optimisation of slag cleaning in electric furnace
SUMA
Supervisor
Aalto-yliopisto Kemian tekniikan korkeakoulu, Finland
Concluded
Outputs

Publications

Book
  1. Serhyi Kutuzov; M.I. Gasik; O.Yu. Urazlina; Michael Gasik; E.I. Tsybulya; V.V. Derkach. Nauchnye osnovy i tehnologii proizvodstva termoantrazita v trubchatyh vraschchayuschihsja pechah i elektrokalzinatorah. PRYVATNE BAHATOPROFILNE PIDPRYYeMSTVO {. 2018.
  2. Bilotsky, Y.; Gasik, M.M.. Ultra-high photon energy absorption by gold nanoparticles arrays. 2014.
    10.4028/www.scientific.net/AMM.481.14
  3. Jalkanen, H.; Gasik, M.. Theory of Ferroalloys Processing. 2013.
    10.1016/B978-0-08-097753-9.00003-4
  4. Gasik, M.. Technology of Zirconium Ferroalloys. 2013.
    10.1016/B978-0-08-097753-9.00016-2
  5. Gasik, M.M.. Introduction. 2013.
    10.1016/B978-0-08-097753-9.00001-0
  6. Gasik, M.. Technology of Tungsten Ferroalloys. 2013.
    10.1016/B978-0-08-097753-9.00011-3
  7. Gasik, M.. Technology of Molybdenum Ferroalloys. 2013.
    10.1016/B978-0-08-097753-9.00012-5
  8. Gasik, M.M.. Handbook of ferroalloys. 2013.
  9. Gasik, M.. Technology of Vanadium Ferroalloys. 2013.
    10.1016/B978-0-08-097753-9.00013-7
  10. Gasik, M.. Technology of Titanium Ferroalloys. 2013.
    10.1016/B978-0-08-097753-9.00015-0
  11. Gasik, M.M.. Preface. 2013.
    10.1016/B978-0-08-097753-9.05001-2
  12. Gasik, M.M.. Handbook of ferroalloys. 2013.
    10.1016/C2011-0-04204-7
  13. Gasik, M.. Introduction: Materials challenges in fuel cells. 2008.
    10.1533/9781845694838.1
  14. Gasik, M.. Materials for fuel cells. 2008.
  15. Zhang, B.; Gasik, M.; Facchini, A.; Pressacco, M.; DallaPria, P.; Posocco, S.. Computer-integrated safe design of FGM component for hip replacement prosthesis. 2005.
  16. Lukáš, P.; Vrána, M.; Šaroun, J.; Ryukhtin, V.; Vleugels, J.; Anné, G.; Van Der Biest, O.; Gasik, M.. Neutron diffraction studies of functionally graded alumina/ zirconia ceramics. 2005.
  17. Gasik, M.; Kawasaki, A.; Kang, Y.-S.. Optimisation of FGM TBC and their thermal cycling stability. 2005.
  18. Zhang, B.; Gasik, M.. Machining FGM: Residual stresses redistribution. 2005.
  19. Malinina, M.; Sammi, T.; Gasik, M.. Corrosion resistance of homogenous and FGM coatings. 2005.
  20. Gasik, M.M.. Industrial applications of FGM solutions. 2003.
  21. Gasik, M.M.; Zhang, B.-S.; Van der Biest, O.; Vleugels, J.; Anne, G.; Put, S.. Design and fabrication of symmetric FGM plates. 2003.
  22. Gasik, M.M.; Zhang, B.. Optimization sintering of zirconia/alumina functionally graded material. 2003.
  23. Bilotsky, Y.; Gasik, M.M.. The new mechanism of abnormally high energy transferring in functionally graded materials. 1999.
    http://dx.doi.org/10.4028/www.scientific.net/msf.308-311.669
Book chapter
  1. Rimondini, Lia. "Bacterial Attachment and Biofilm Formation on Biomaterials". In Biomaterials and Immune Response, 87-120. CRC Press, 2018.
    Published • 10.1201/b22419-5
  2. Michael Gasik; M.I. Gasik; Serhyi Kutuzov. "Materialovedcheskie problemy processov prevraschenia faz uglerodnyh materialov pri ih vysokotemperaturnoi obrabotke v peremennyh electromagnitnyh polyah". edited by L.M. Lobanov, 5-23. Academperiodica, 2018.
  3. Lia Rimondini; Michael Gasik. "Bacterial attachment and biofilm formation on biomaterials: the case of dental and orthopaedic implants". edited by Vrana, {Nihal Engin. Taylor & Francis, 2018.
    10.1201/b22419
Conference paper
  1. Michael Gasik. "Model-free assessment of biomechanical properties for personalized medical devices". 2021.
  2. Kutsin, V.S.; Olshanskiy, V.I.; Dedov, U.B.; Philipov, I.; Gasik, M.I.; Gasik, M.M.; Ovcharuk, A.N.; Polyakov, O.I.. "Technical development of ferrosilicon manganese production in ore-smelting electric furnaces with using of manganese magnesia agglomerate". 2020.
  3. F. Melo-Fonseca; Ines Mendes Pinto; Michael Gasik; Filipe Samuel Silva; G. Miranda. "Designing osteogenic-stimulating titanium-based implants". 2020.
  4. Michael Gasik; M.I. Gasik; S. P. Shuvaev. "Effect of high alkali content in ferrosilicomanganese smelting slags on slag properties and on the destruction of furnace lining". 2018.
  5. Gasik, M.M.; Gasik, M.I.; Shuvaev, S.P.. "Effect of high alkali content in ferrosilicomanganese smelting slags on slag properties and on the destruction of furnace lining". 2018.
  6. Gasik, M.I.; Gasik, M.M.. "Vacuum-thermal method of deep refining of ferrochromium in solid state". 2015.
  7. Gasik, M.M.; Gasik, M.I.. "Multi-variation analysis and optimisation of electrical conductivity of mno-sio2-cao slags". 2010.
  8. Gasik, M.M.; Gasik, M.I.; Urazlina, O.Yu.; Kutuzov, S.V.. "Modelling and optimisation of anthracite treatment in an electrocalcinator". 2010.
  9. Rodriguez, G.; Poitou, S.; Mansilla, C.; Haquet, N.; Sattler, C.; Roeb, M.; Kolb, G.; et al. "High temperature hydrogen production process: A new task from the international energy agency / hydrogen implementing agreement". 2008.
  10. Xia, J.L.; Järvi, J.; Nurminen, E.; Peuraniemi, E.; Gasik, M.. "Cooling of gas by a water spray in a straight duct - Cross flow". 2006.
  11. Xia, J.L.; Järvi, J.; Nurminen, E.; Peuraniemi, E.; Gasik, M.. "Modelling of the cooling of a hot gas using a water spray in a duct". 2006.
  12. Fagerlund, K.; Sotka, P.; Liipo, J.; Gasik, M.; Ruokonen, E.. "Evaluation of arsenic dissolution behaviour of iron silica sands". 2005.
  13. Gasik, M.M.; Ueda, S.. "Micromechanical modelling of functionally graded W-Cu materials for divertor plate components in a fusion reactor". 1999.
Conference poster
  1. Michael Gasik; Yevgen Bilotsky. "Model-free biomechanology of bioprinting and bioprinted materials". 2021.
  2. Michael Gasik; Marina Sokolova; Alexandra Zühlke; Janis Locs; Dagnija Loca; Yevgen Bilotsky. "Biomechanical characterisation of HA-CaP-laden strong hydrogels for bone grafting". 2021.
  3. Alexandra Zühlke; Michael Gasik; Nihal Engin Vrana; Christine Muller; Julien Barthes; Yevgen Bilotsky; E Courtial; Christophe Marquette. "Moulded or 3D printed medical silicones: biomechanological evaluation". 2021.
  4. Michael Gasik; Irina Hussainova; Jekaterina Kazantseva; Roman Ivanov. "Self-aligned fibrous scaffolds for automechanoinduction of cell cultures". 2021.
  5. F. Melo-Fonseca; Ines Mendes Pinto; Michael Gasik; Filipe Samuel Silva; G. Miranda. "Improved implant-host bone interaction by stimulating physiological MSC-osteogenic differentiation". 2019.
Journal article
  1. Francisca Melo-Fonseca; Bruno Guimarães; Michael Gasik; Filipe S. Silva; Georgina Miranda. "Experimental analysis and predictive modelling of Ti6Al4V laser surface texturing for biomedical applications". Surfaces and Interfaces (2022): https://doi.org/10.1016/j.surfin.2022.102466.
    10.1016/j.surfin.2022.102466
  2. Ângela Cunha; Ana Marques; Bruno Guimarães; Flávio Bartolomeu; Filipe Samuel Silva; Michael Gasik; Bruno Trindade; Óscar Carvalho. "Production of a multi-functional 420 stainless steel-copper surface by laser texturing and hot pressing: a new solution for plastic injection moulds". International Journal of Advanced Manufacturing Technology 123 3-4 (2022): 1341–1352-1341–1352. https://research.aalto.fi/en/publications/232183dc-62c8-498b-bd38-1b08f7a16ab3.
    10.1007/s00170-022-10252-w
  3. Alexandra Zühlke; Michael Gasik; Nihal Engin Vrana; Celine Blandine Muller; Julien Barthes; Yevgen Bilotsky; Edwin Courtial; Christophe Marquette. "Biomechanical and functional comparison of moulded and 3D printed medical silicones". Journal of the Mechanical Behavior of Biomedical Materials 122 (2021): 104649-104649. https://doi.org/10.1016/j.jmbbm.2021.104649.
    10.1016/j.jmbbm.2021.104649
  4. Alexandra Zühlke; Michael Gasik; Khalil Shahramian; Timo Närhi; Yevgen Bilotsky; Ilkka Kangasniemi. "Enhancement of Gingival Tissue Adherence of Zirconia Implant Posts: In Vitro Study". Materials 14 2 (2021): 455-455. https://doi.org/10.3390/ma14020455.
    10.3390/ma14020455
  5. Michael Gasik; Roman Ivanov; Jekaterina Kazantseva; Yevgen Bilotsky; Irina Hussainova. "Biomechanical Features of Graphene-Augmented Inorganic Nanofibrous Scaffolds and Their Physical Interaction with Viruses". Materials (2020): https://doi.org/10.3390/ma14010164.
    10.3390/ma14010164
  6. Hussainova, I.; Shamshirgar, A.S.; Ivanov, R.; Volobujeva, O.; Romanov, A.E.; Gasik, M.. "Directional conductivity in layered alumina". Current Applied Physics (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85086840921&partnerID=MN8TOARS.
    10.1016/j.cap.2020.06.009
  7. Melo-Fonseca, F.; Miranda, G.; Domingues, H.S.; Pinto, I.M.; Gasik, M.; Silva, F.S.. "Reengineering Bone-Implant Interfaces for Improved Mechanotransduction and Clinical Outcomes". Stem Cell Reviews and Reports (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85089487723&partnerID=MN8TOARS.
    10.1007/s12015-020-10022-9
  8. Shahramian, K.; Gasik, M.; Kangasniemi, I.; Walboomers, X.F.; Willberg, J.; Abdulmajeed, A.; Närhi, T.. "Zirconia implants with improved attachment to the gingival tissue". Journal of Periodontology 91 9 (2020): 1213-1224. http://www.scopus.com/inward/record.url?eid=2-s2.0-85090785919&partnerID=MN8TOARS.
    10.1002/JPER.19-0323
  9. S.V. Kutuzov; V.V. Derkach; M.I. Gasik; A.P. Gorobets; Michael Gasik. "Issledovanie rezhimov prokalki termoantracita dlya proizvodstva nepreryvnyh samoobzhygayuschihsja elektrodov rudovosstanovitelnyh pechei". Advances in Electrometallurgy 1 (2020): 43-45. https://research.aalto.fi/en/publications/433dfe89-a1e6-4b9a-abaa-93848fe016e1.
    10.37434/sem2020.01.05
  10. Michael Gasik; M. I. Gasik. "Chemical potentials and activities in metallurgical processes". Advances in Electrometallurgy 4 (2020): 39-43. https://research.aalto.fi/en/publications/515a7aa5-1ad0-4e73-93e3-6f66bc0dc0bb.
    10.37434/sem2020.04.07
  11. Shahramian, Khalil; Gasik, Michael; Kangasniemi, Ilkka; Walboomers, Frank; Willberg, Jaana; Abdulmajeed, Aous; Närhi, Timo. "Zirconia implants with improved attachment to the gingival tissue". Journal of Periodontology (2019): http://dx.doi.org/10.1002/jper.19-0323.
    Open access • 10.1002/jper.19-0323
  12. Andrea Cochis; Barbara Azzimonti; Roberto Chiesa; Lia Rimondini; Michael Gasik. "Metallurgical Gallium Additions to Titanium Alloys Demonstrate a Strong Time-Increasing Antibacterial Activity without any Cellular Toxicity". ACS Biomaterials Science & Engineering (2019): https://doi.org/10.1021/acsbiomaterials.9b00147.
    10.1021/acsbiomaterials.9b00147
  13. Costa, M.M.; Lima, R.; Melo-Fonseca, F.; Bartolomeu, F.; Alves, N.; Miranda, A.; Gasik, M.; et al. "Development of ß-TCP-Ti6Al4V structures: Driving cellular response by modulating physical and chemical properties". Materials Science and Engineering: C 98 (2019): 705-716. http://dx.doi.org/10.1016/j.msec.2019.01.016.
    10.1016/j.msec.2019.01.016
  14. Vecstaudza, Jana; Gasik, Michael; Locs, Janis. "Amorphous calcium phosphate materials: Formation, structure and thermal behaviour". Journal of the European Ceramic Society 39 4 (2019): 1642-1649. http://dx.doi.org/10.1016/j.jeurceramsoc.2018.11.003.
    10.1016/j.jeurceramsoc.2018.11.003
  15. Miranda, G.; Faria, S.; Bartolomeu, F.; Pinto, E.; Alves, N.; Peixinho, N.; Gasik, M.; Silva, F.S.. "A study on the production of thin-walled Ti6Al4V parts by selective laser melting". Journal of Manufacturing Processes 39 (2019): 346-355. http://dx.doi.org/10.1016/j.jmapro.2018.12.036.
    10.1016/j.jmapro.2018.12.036
  16. Madeira, S.; Gasik, M.; Souza, Júlio C.M.; Silva, F.S.; Henriques, Bruno. "Damping and mechanical behavior of metal-ceramic composites applied to novel dental restorative systems". Journal of the Mechanical Behavior of Biomedical Materials 90 (2019): 239-247. http://dx.doi.org/10.1016/j.jmbbm.2018.09.046.
    10.1016/j.jmbbm.2018.09.046
  17. Bartolomeu, F.; Buciumeanu, M.; Costa, M.M.; Alves, N.; Gasik, M.; Silva, F.S.; Miranda, G.. "Multi-material Ti6Al4V & PEEK cellular structures produced by Selective Laser Melting and Hot Pressing: A tribocorrosion study targeting orthopedic applications". Journal of the Mechanical Behavior of Biomedical Materials 89 (2019): 54-64. http://dx.doi.org/10.1016/j.jmbbm.2018.09.009.
    Published • 10.1016/j.jmbbm.2018.09.009
  18. Gasik, Michael. "Novel laser surface texturing for improved primary stability of titanium implants". Journal of the Mechanical Behavior of Biomedical Materials 98 (2019): 26-39.
    Published
  19. Tiainen, L.; Abreu, P.; Buciumeanu, M.; Silva, F.; Gasik, M.; Serna Guerrero, R.; Carvalho, O.. "Novel laser surface texturing for improved primary stability of titanium implants". Journal of the Mechanical Behavior of Biomedical Materials 98 (2019): 26-39. http://www.scopus.com/inward/record.url?eid=2-s2.0-85066766475&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2019.04.052
  20. Bartolomeu, F.; Fonseca, J.; Peixinho, N.; Alves, N.; Gasik, M.; Silva, F.S.; Miranda, G.. "Predicting the output dimensions, porosity and elastic modulus of additive manufactured biomaterial structures targeting orthopedic implants". Journal of the Mechanical Behavior of Biomedical Materials 99 (2019): 104-117. http://www.scopus.com/inward/record.url?eid=2-s2.0-85069748110&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2019.07.023
  21. Melo-Fonseca, F.; Lima, R.; Costa, M.M.; Bartolomeu, F.; Alves, N.; Miranda, A.; Gasik, M.; et al. "45S5 BAG-Ti6Al4V structures: The influence of the design on some of the physical and chemical interactions that drive cellular response". Materials & Design 160 (2018): 95-105. http://dx.doi.org/10.1016/j.matdes.2018.08.056.
    Published • 10.1016/j.matdes.2018.08.056
  22. Gasik, Michael; Zühlke, Alexandra; Haaparanta, Anne-Marie; Muhonen, Virpi; Laine, Kaisa; Bilotsky, Yevgen; Kellomäki, Minna; Kiviranta, Ilkka. "The Importance of Controlled Mismatch of Biomechanical Compliances of Implantable Scaffolds and Native Tissue for Articular Cartilage Regeneration". Frontiers in Bioengineering and Biotechnology 6 (2018): http://dx.doi.org/10.3389/fbioe.2018.00187.
    Open access • Published • 10.3389/fbioe.2018.00187
  23. Jekaterina Kazantseva; Irina Hussainova; Roman Ivanov; Toomas Neuman; Michael Gasik. "Hybrid graphene–ceramic nanofibre network for spontaneous neural differentiation of stem cells". Interface Focus (2018): https://doi.org/10.1098/rsfs.2017.0037.
    10.1098/rsfs.2017.0037
  24. Shamshirgar, Ali Saffar; Aghayan, Marina; Tripathi, Tripurari S.; Karppinen, Maarit; Gasik, Michael; Hussainova, Irina. "Time-effective synthesis of rhombohedral CuAlO2 from mesoporous alumina substrate". Materials & Design 147 (2018): 48-55. http://dx.doi.org/10.1016/j.matdes.2018.03.031.
    Open access • 10.1016/j.matdes.2018.03.031
  25. Jekaterina Kazantseva; Roman Ivanov; Michael Gasik; Toomas Neuman; Irina Hussainova. "Graphene-Augmented Nanofiber Scaffolds Trigger Gene Expression Switching of Four Cancer Cell Types". ACS Biomaterials Science & Engineering (2018): https://doi.org/10.1021/acsbiomaterials.8b00228.
    10.1021/acsbiomaterials.8b00228
  26. Fabris, Douglas; Souza, Júlio C.M.; Silva, Filipe S.; Fredel, Márcio; Gasik, Michael; Henriques, Bruno. "Influence of specimens’ geometry and materials on the thermal stresses in dental restorative materials during thermal cycling". Journal of Dentistry 69 (2018): 41-48. http://dx.doi.org/10.1016/j.jdent.2017.08.017.
    Published • 10.1016/j.jdent.2017.08.017
  27. Michael Gasik. "Understanding biomaterial-tissue interface quality: combined in vitro evaluation". Science and Technology of Advanced Materials 18 1 (2017): 550-562. https://doi.org/10.1080/14686996.2017.1348872.
    10.1080/14686996.2017.1348872
  28. Isomäki, Iikka; Hämäläinen, Marko; Braga, Maria H.; Gasik, Michael. "First principles, thermal stability and thermodynamic assessment of the binary Ni–W system". International Journal of Materials Research 108 12 (2017): 1025-1035. http://dx.doi.org/10.3139/146.111557.
    Published • 10.3139/146.111557
  29. Santasalo-Aarnio, Annukka; Galfi, Istvan; Virtanen, Jorma; Gasik, Michael M.. "New analytical methodology for analysing S(IV) species at low pH solutions by one stage titration method (bichromatometry) with a clear colour change. Could potentially replace the state-of-art-method iodometry at low pH analysis due higher accuracy". PLOS ONE 12 11 (2017): e0188227. http://dx.doi.org/10.1371/journal.pone.0188227.
    Open access • Published • 10.1371/journal.pone.0188227
  30. Gasik, M.M.; Virtanen, J.; Santasalo-Aarnio, A.. "Improved operation of SO 2 depolarized electrolyser stack for H 2 production at ambient conditions". International Journal of Hydrogen Energy 42 19 (2017): 13407-13414. http://dx.doi.org/10.1016/j.ijhydene.2017.03.003.
    Published • 10.1016/j.ijhydene.2017.03.003
  31. Kocen, Rok; Gasik, Michael; Gantar, Ana; Novak, Saša. "Viscoelastic behaviour of hydrogel-based composites for tissue engineering under mechanical load". Biomedical Materials 12 2 (2017): 025004. http://dx.doi.org/10.1088/1748-605x/aa5b00.
    Open access • Published • 10.1088/1748-605x/aa5b00
  32. Bilotsky; Gasik; Lev. "Diffusion equations in inhomogeneous solid having arbitrary gradient concentration". Condensed Matter Physics 20 1 (2017): 13201. http://dx.doi.org/10.5488/cmp.20.13201.
    Published • 10.5488/cmp.20.13201
  33. Bilotsky, Y.; Gasik, M.; Lev, B.. "Diffusion equations in inhomogeneous solid having arbitrary gradient concentration". Condensed Matter Physics 20 1 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85016724210&partnerID=MN8TOARS.
    10.5488/CMP.20.13201
  34. Kocen, R.; Gasik, M.; Gantar, A.; Novak, S.. "Viscoelastic behaviour of hydrogel-based composites for tissue engineering under mechanical load". Biomedical Materials (Bristol) 12 2 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85018296827&partnerID=MN8TOARS.
    10.1088/1748-605X/aa5b00
  35. Mosselhy, D.A.; Ge, Y.; Gasik, M.; Nordström, K.; Natri, O.; Hannula, S.-P.. "Silica-gentamicin nanohybrids: Synthesis and antimicrobial action". Materials 9 3 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84962642563&partnerID=MN8TOARS.
    10.3390/ma9030170
  36. Santasalo-Aarnio, A.; Lokkiluoto, A.; Virtanen, J.; Gasik, M.M.. "Performance of electrocatalytic gold coating on bipolar plates for SO2 depolarized electrolyser". Journal of Power Sources 306 (2016): 1-7. http://www.scopus.com/inward/record.url?eid=2-s2.0-84949509253&partnerID=MN8TOARS.
    10.1016/j.jpowsour.2015.11.104
  37. Carvalho, O.; Miranda, G.; Buciumeanu, M.; Gasik, M.; Silva, F.S.; Madeira, S.. "High temperature damping behavior and dynamic Young's modulus of AlSi-CNT-SiCp hybrid composite". Composite Structures (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84961286220&partnerID=MN8TOARS.
    10.1016/j.compstruct.2016.01.046
  38. Santasalo-Aarnio, A.; Virtanen, J.; Gasik, M.. "SO2 carry-over and sulphur formation in a SO2-depolarized electrolyser". Journal of Solid State Electrochemistry (2016): 1-9. http://www.scopus.com/inward/record.url?eid=2-s2.0-84960365781&partnerID=MN8TOARS.
    10.1007/s10008-016-3169-8
  39. Kazantseva, J.; Ivanov, R.; Gasik, M.; Neuman, T.; Hussainova, I.. "Graphene-augmented nanofiber scaffolds demonstrate new features in cells behaviour". Scientific Reports 6 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-84979285015&partnerID=MN8TOARS.
    10.1038/srep30150
  40. Bilotsky, Y; Gasik, M. "Modelling of poro-visco-elastic biological systems". Journal of Physics: Conference Series 633 (2015): 012134. http://dx.doi.org/10.1088/1742-6596/633/1/012134.
    Published • 10.1088/1742-6596/633/1/012134
  41. Aghayan, Marina; Gasik, Michael; Hussainova, Irina; Rubio-Marcos, Fernando; Kollo, Lauri; Kübarsepp, Jakob; Aghayan, M.; et al. "Thermal and microstructural analysis of doped alumina nanofibers". Thermochimica Acta 602 (2015): 43-48. http://dx.doi.org/10.1016/j.tca.2015.01.009.
    Published • 10.1016/j.tca.2015.01.009
  42. Gasik, M.; Braem, A.; Chaudhari, A.; Duyck, J.; Vleugels, J.. "Titanium implants with modified surfaces: Meta-analysis of in vivo osteointegration". Materials Science and Engineering C 49 (2015): 152-158. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920489082&partnerID=MN8TOARS.
    10.1016/j.msec.2014.12.074
  43. Henriques, B.; Miranda, G.; Gasik, M.; Souza, J.C.M.; Nascimento, R.M.; Silva, F.S.. "Finite element analysis of the residual thermal stresses on functionally gradated dental restorations". Journal of the Mechanical Behavior of Biomedical Materials 50 (2015): 123-130. http://www.scopus.com/inward/record.url?eid=2-s2.0-84932627264&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2015.06.003
  44. Henriques, B.; Bagheri, A.; Gasik, M.; Souza, J.C.M.; Carvalho, O.; Silva, F.S.; Nascimento, R.M.. "Mechanical properties of hot pressed CoCrMo alloy compacts for biomedical applications". Materials and Design 83 (2015): 829-834. http://www.scopus.com/inward/record.url?eid=2-s2.0-84941276703&partnerID=MN8TOARS.
    10.1016/j.matdes.2015.06.069
  45. Henriques, B.; Gasik, M.; Miranda, G.; Souza, J.C.M.; Nascimento, R.M.; Silva, F.S.. "Improving the functional design of dental restorations by adding a composite interlayer in the multilayer system: Multi-aspect analysis". Ciencia e Tecnologia dos Materiais 27 1 (2015): 36-40. http://www.scopus.com/inward/record.url?eid=2-s2.0-84947723583&partnerID=MN8TOARS.
    10.1016/j.ctmat.2015.06.002
  46. Bilotsky, Y.; Gasik, M.. "A new approach for modelling lattice energy in finite crystal domains". Journal of Physics: Conference Series 633 1 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84947293860&partnerID=MN8TOARS.
    10.1088/1742-6596/633/1/012014
  47. Gasik, M.M.; Gasik, M.I.; Leont’ev, L.I.; Dashevskii, V.Y.; Griogorovich, K.V.. "Fundamental relation between the main parameters of the thermally activated transport phenomena in complex oxide melts". Russian Metallurgy (Metally) 2014 7 (2014): 503-508. http://www.scopus.com/inward/record.url?eid=2-s2.0-84926639937&partnerID=MN8TOARS.
    10.1134/S0036029514070052
  48. Kutsin, V.S.; Ol'shanskii, V.I.; Dedov, Y.B.; Gasik, M.I.; Gasik, M.M.. "Smelting ferrosilicomanganese from manganese magnesia sinter". Steel in Translation 44 1 (2014): 50-53. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899694385&partnerID=MN8TOARS.
    10.3103/S0967091214010112
  49. Gasik, M.; Bilotsky, Y.. "Optimisation of functionally gradated material thermoelectric cooler for the solar space power system". Applied Thermal Engineering 66 1-2 (2014): 528-533. http://www.scopus.com/inward/record.url?eid=2-s2.0-84896529653&partnerID=MN8TOARS.
    10.1016/j.applthermaleng.2014.02.058
  50. Henriques, B.; Gasik, M.; Souza, J.C.M.; Nascimento, R.M.; Soares, D.; Silva, F.S.. "Mechanical and thermal properties of hot pressed CoCrMo-porcelain composites developed for prosthetic dentistry". Journal of the Mechanical Behavior of Biomedical Materials 30 (2014): 103-110. http://www.scopus.com/inward/record.url?eid=2-s2.0-84888094856&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2013.10.023
  51. Gasik, M.; Keski-Honkola, A.; Bilotsky, Y.; Friman, M.. "Development and optimisation of hydroxyapatite-ß-TCP functionally gradated biomaterial". Journal of the Mechanical Behavior of Biomedical Materials 30 (2014): 266-273. http://www.scopus.com/inward/record.url?eid=2-s2.0-84890850497&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2013.11.017
  52. Zhou, Z.; Paulino, G.H.; Pindera, M.-J.; Kim, J.H.; Erdogan, E.F.; Willert-Porada, M.; Bunk, E.W.G.J.; et al. "Preface". Journal of Physics: Conference Series 419 1 (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84876472781&partnerID=MN8TOARS.
    10.1088/1742-6596/419/1/011001
  53. Lokkiluoto, Anu; Gasik, Michael M.. "Modeling and experimental assessment of Nafion membrane properties used in SO2 depolarized water electrolysis for hydrogen production". International Journal of Hydrogen Energy 38 1 (2013): 10-19.
    10.1016/j.ijhydene.2012.09.168
  54. Aghayan, M.; Hussainova, I.; Gasik, M.; Kutuzov, M.; Friman, M.. "Coupled thermal analysis of novel alumina nanofibers with ultrahigh aspect ratio". Thermochimica Acta 574 (2013): 140-144. http://www.scopus.com/inward/record.url?eid=2-s2.0-84887081259&partnerID=MN8TOARS.
    10.1016/j.tca.2013.10.010
  55. Gasik, Michael M.; Lokkiluoto, Anu K. K.. "Activities and Free Energy of Mixing of Sulfuric Acid Solutions by Gibbs-Duhem Equation Integration". Journal of Chemical and Engineering Data 57 6 (2012): 1665-1671.
    10.1021/je2011743
  56. Anne, Jozef; Braem, Annabel; De Waelheyns, Evelien; Gasik, Michael; Harmand, Marie-Francoise; Hofmans, Dorien; Pierron, Dorothee; Van Mellaert, Lieve; Vleugels, Jozef. "Reduction of Biofilm Infection Risks and Promotion of Osteointegration for Optimized Surfaces of Titanium Implants". Advanced Healthcare Materials 1 1 (2012): 117-127.
    10.1002/adhm.201100006
  57. Gasik, Michael; Hamalainen, Marko; Isomaki, Iikka. "Thermodynamic assessment of the ternary Ni-Ti-Cr system". Journal of Alloys and Compounds 543 (2012): 12-18.
    10.1016/j.jallcom.2012.06.121
  58. Lokkiluoto, A.; Taskinen, P.A.; Gasik, M.; Kojo, I.V.; Peltola, H.; Barker, M.H.; Kleifges, K.-H.. "Novel process concept for the production of H 2 and H 2SO 4 by SO 2-depolarized electrolysis". Environment, Development and Sustainability 14 4 (2012): 529-540. http://www.scopus.com/inward/record.url?eid=2-s2.0-84862206998&partnerID=MN8TOARS.
    10.1007/s10668-012-9342-z
  59. Henriques, B.; Gasik, M.; Soares, D.; Silva, F. S.. "Experimental evaluation of the bond strength between a CoCrMo dental alloy and porcelain through a composite metal-ceramic graded transition interlayer". Journal of the Mechanical Behavior of Biomedical Materials 13 (2012): 206-214.
    10.1016/j.jmbbm.2012.04.019
  60. Galzim, O.; Mansilla, C.; Giaconia, A.; Poitou, S.; Hinkley, J.; Ebbesen, S.D.; Gasik, M.; et al. "A multicriteria approach for evaluating high temperature hydrogen production processes". International Journal of Multicriteria Decision Making 1 2 (2011): 177-204. http://www.scopus.com/inward/record.url?eid=2-s2.0-84862226384&partnerID=MN8TOARS.
    10.1504/IJMCDM.2011.039586
  61. Gasik, M.M.; Kutsyn, V.S.; Gasik, M.I.. "Mathematical analysis of experimental data on MnO-SiO2-CaO system molten slag electric conductivity in manganese ferroalloy production". Metallurgical and Mining Industry 3 2 (2011): 44-50. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870278380&partnerID=MN8TOARS.
  62. Gasik, M.M.. "Functionally Graded Materials: Bulk processing techniques". International Journal of Materials and Product Technology 39 1-2 (2010): 20-29. http://www.scopus.com/inward/record.url?eid=2-s2.0-77955199851&partnerID=MN8TOARS.
    10.1504/IJMPT.2010.034257
  63. Gasik, M.M.; Panchenko, A.N.. "Modeling of steel oxidation resistance for furnace bars of conveyor-type machine for iron-ore pellets roasting". Metallurgical and Mining Industry 2 5 (2010): 336-340. http://www.scopus.com/inward/record.url?eid=2-s2.0-84871687812&partnerID=MN8TOARS.
  64. Gasik, M.M.; Gasik, M.I.. "Thermodynamic Analysis of the Dominant Phase Equilibria in M(Si, Cr, Al)-O-C systems". Russian Metallurgy (Metally) 2010 6 (2010): 548-556. http://www.scopus.com/inward/record.url?eid=2-s2.0-78249240082&partnerID=MN8TOARS.
    10.1134/S0036029510060170
  65. Gasik, Michael; Zhang, Baosheng; Kawasaki, A; Kumakawa, A; Niino, M. "Modelling of processing of FGM bioimplants". Multiscale, Multifunctional and Functionally Graded Materials 631-632 (2010): 217-222.
    10.4028/www.scientific.net/MSF.631-632.217
  66. Gasik, Michael; Bilotsky, Yevgen; Lev, Bohdan; Kawasaki, A; Kumakawa, A; Niino, M. "Thermodynamics of FGM: new approach for free energy and the equilibrium state calculations". Multiscale, Multifunctional and Functionally Graded Materials 631-632 (2010): 59-64.
    10.4028/www.scientific.net/MSF.631-632.59
  67. Bilotsky, Y.; Grigorchuk, N.; Tomchuk, P.; Gasik, M.; Glorieux, C; Thoen, J. "Thermoacoustic phenomena in metal nanoparticle systems generated by an ultrashort laser pulse". 15th International Conference on Photoacoustic and Photothermal Phenomena (Icppp15) 214 (2010):
    10.1088/1742-6596/214/1/012050
  68. Gasik, Michael; Kawasaki, Akira; Kawasaki, A; Kumakawa, A; Niino, M. "Analysis and Simulation of FGM Thermal Barrier Coatings Hot Burner Testing". Multiscale, Multifunctional and Functionally Graded Materials 631-632 (2010): 79-84.
    10.4028/www.scientific.net/MSF.631-632.79
  69. Gasik, M.I.; Gasik, M.M.; Tsybulya, E.I.; Grinshpunt, A.G.; Kutuzov, S.V.; Urazlina, O.Y.; Golchanskaya, V.M.; Gnezdilova, V.P.. "Effect of nano-sized powder additions of complex alloy Fe-Si-Al-Ca-Ti in the electrode charge on graphitation process and enhancement of graphitized products properties". Metallurgical and Mining Industry 1 1 (2009): 4-10. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856766820&partnerID=MN8TOARS.
  70. Mazur, Alexander V.; Gasik, Michael M.. "Thermal expansion of silicon at temperatures up to 1100 degrees C". Journal of Materials Processing Technology 209 2 (2009): 723-727.
    10.1016/j.jmatprotec.2008.02.041
  71. Mazur, A.V.; Gasik, M.M.. "In-situ analysis of phase formations in semi-solid state in the hypereutectic Al-Si alloy". Kovove Materialy 46 2 (2008): 63-69. http://www.scopus.com/inward/record.url?eid=2-s2.0-47249106403&partnerID=MN8TOARS.
  72. Xia, J.L.; Järvi, J.; Nurminen, E.; Peuraniemi, E.; Gasik, M.. "Effect of nozzle location and nozzle capacity on spray cooling of hot gas in a horizontal duct". Canadian Metallurgical Quarterly 46 4 (2007): 407-414. http://www.scopus.com/inward/record.url?eid=2-s2.0-36549078734&partnerID=MN8TOARS.
  73. Gasik, M.M.; Gasik, M.I.; Petrov, B.F.; Kutuzov, S.V.; Urazlina, O.Yu.. "Simulation of the electrocalcination of thermoanthracite". Steel in Translation 36 12 (2006): 77-81. http://www.scopus.com/inward/record.url?eid=2-s2.0-77950086270&partnerID=MN8TOARS.
  74. Gasik, M.M.; Gasik, M.I.; Urazlina, O.Yu.. "Design of heating engineering processes of heat treatment of anthracite at air". Metallurgicheskaya i Gornorudnaya Promyshlennost 1 (2005): 22-26. http://www.scopus.com/inward/record.url?eid=2-s2.0-29144479208&partnerID=MN8TOARS.
  75. Mazur, A.V.; Gasik, M.M.. "Low-temperature phase transformations phenomena in the A1-21.5%Si alloy". Kovove Materialy 43 6 (2005): 389-403. http://www.scopus.com/inward/record.url?eid=2-s2.0-33644683953&partnerID=MN8TOARS.
  76. Mazur, A.V.; Gasik, M.M.; Mazur, V.I.. "Microstructure formation in Ti-Si composite subjected to high temperature gradients". Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques 96 4 (2005): 377-379. http://www.scopus.com/inward/record.url?eid=2-s2.0-17444426704&partnerID=MN8TOARS.
    10.3139/ijmr-2005-0065
  77. Mazur, A; Gasik, MM; Mazur, VI. "Thermal analysis of eutectic reactions of white cast irons". Scandinavian Journal of Metallurgy 34 4 (2005): 245-249.
    10.1111/j.1600-0692.2005.00730.x
  78. Gasik, M.M.; Urazlina, O.Yu.; Gasik, M.I.. "Design of the thermal and electric modes of operations of elektrokal'tsynator at heat treatment of anthracite". Metallurgicheskaya i Gornorudnaya Promyshlennost 5 (2004): 18-23. http://www.scopus.com/inward/record.url?eid=2-s2.0-15244350669&partnerID=MN8TOARS.
  79. Urazlina, O.Yu.; Gasik, M.M.; Gasik, M.I.. "Research of the physical properties anthracitic coal at high temperature glowing of anthracite". Metallurgicheskaya i Gornorudnaya Promyshlennost 4 (2004): 17-20. http://www.scopus.com/inward/record.url?eid=2-s2.0-6944246159&partnerID=MN8TOARS.
  80. Gasik, M.M.; Urazlina, O.Yu.; Gasik, M.I.. "Design of heating engineering processes heat treatments of anthracite at air and plenochnovodyanom cooling of casing elektrokal'tsynatora". Metallurgicheskaya i Gornorudnaya Promyshlennost 6 (2004): 31-34. http://www.scopus.com/inward/record.url?eid=2-s2.0-15244349409&partnerID=MN8TOARS.
  81. Mazur, A.V.; Gasik, M.M.; Mazur, V.I.. "Study of Ti-Si in situ composite processing by multi-stage eutectic solidification". Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques 95 5 (2004): 377-380. http://www.scopus.com/inward/record.url?eid=2-s2.0-2542431964&partnerID=MN8TOARS.
    10.3139/ijmr-2004-0079
  82. Nissinen, T; Kiros, Y; Gasik, M; Lampinen, M. "Comparison of preparation routes of spinel catalyst for alkaline fuel cells". Materials Research Bulletin 39 9 (2004): 1195-1208.
    10.1016/j.materresbull.2004.04.015
  83. Lilius, K.P.; Gasik, M.M.. "Functional gradient materials: New materials science solutions". Problemy Spetsial'noj Electrometallugii (2003): 32-37. http://www.scopus.com/inward/record.url?eid=2-s2.0-0242641410&partnerID=MN8TOARS.
  84. Gasik, M.I.; Gasik, M.M.; Polyakov, O.I.; Zubov, V.L.. "Thermodynamic model of ferrosilicium melting process in high-power ore-thermal electrical furnaces". Problemy Spetsial'noj Electrometallugii 3 (2003): 37-47. http://www.scopus.com/inward/record.url?eid=2-s2.0-0347622421&partnerID=MN8TOARS.
  85. Nissinen, TA; Kiros, Y; Gasik, M; Leskela, M. "MnCo2O4 preparation by microwave-assisted route synthesis (MARS) and the effect of carbon admixture". Chemistry of Materials 15 26 (2003): 4974-4979.
    10.1021/cm031093x
  86. Nissinen, T; Valo, T; Gasik, M; Rantanen, J; Lampinen, M. "Microwave synthesis of catalyst spinel MnCo2O4 for alkaline fuel cell". Journal of Power Sources 106 1-2 (2002): 109-115.
    10.1016/S0378-7753(01)01049-7
  87. Gasik, M.M.; Zubov, V.L.; Gasik, M.I.. "Investigation of phase transformations in industrial ferrosilicon using method of synchronous thermal analysis". Problemy Spetsial'noj Electrometallugii 4 (2002): 41-45. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036994273&partnerID=MN8TOARS.
  88. Gasik, M.I.; Gasik, M.M.; Zubov, V.L.; Polyakov, O.I.. "Hydrogen influence on component stability in condensed phase". Stal' 12 (2002): 30-35. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036937433&partnerID=MN8TOARS.
  89. Jiang, JJ; Gasik, M; Laine, J; Lampinen, M. "Electrochemical evaluation of sintered metal hydride electrodes for electric vehicle applications". Journal of Alloys and Compounds 322 1-2 (2001): 281-285.
    10.1016/S0925-8388(01)01257-9
  90. Ueda, S.; Gasik, M.. "Analysis of mechanical behavior in a W-Cu divertor plate by micromechanical model". Theoretical and Applied Mechanics Japan 50 (2001): 41-47. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035734709&partnerID=MN8TOARS.
  91. Ueda, S; Gasik, M. "Thermal-elasto-plastic analysis of W-CU functionally graded materials subjected to a uniform heat flow by micromechanical model". Journal of Thermal Stresses 23 4 (2000): 395-409.
    10.1080/014957300280380
  92. Jiang, JJ; Gasik, M. "An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys". Journal of Power Sources 89 1 (2000): 117-124.
    10.1016/S0378-7753(00)00400-6
  93. Gasik, M.; Zhang, B.. "A constitutive model and FE simulation for the sintering process of powder compacts". Computational Materials Science 18 1 (2000): 93-101. http://www.scopus.com/inward/record.url?eid=2-s2.0-0005275177&partnerID=MN8TOARS.
  94. Gasik, M.M.. "Micromechanical modelling of functionally graded materials". Computational Materials Science 13 1-3 (1998): 42-55. http://www.scopus.com/inward/record.url?eid=2-s2.0-0002077467&partnerID=MN8TOARS.
  95. Gasik, M.M.; Gasik, M.I.; Porada, A.N.; Kisel'gof, O.L.. "Investigation of thermodynamic stability of oxide phase during heating the multicomponent ceramic binders". Ogneupory i Tekhnicheskaya Keramika 8 (1998): 26-28. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032137280&partnerID=MN8TOARS.
  96. Gasik, M.M.; Gasik, M.I.; Porada, A.N.; Kisel'gof, O.L.. "A study of thermodynamic stability of oxide phases in heating multicomponent ceramic binders". Refractories and Industrial Ceramics 39 7-8 (1998): 288-290. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032235625&partnerID=MN8TOARS.
  97. Heikinheimo, L; Siren, M; Gasik, MM; Shiota, I; Miyamoto, Y. "Al2O3 to Ni-superalloy diffusion bonded FG-joints for high temperature applications". Functionally Graded Materials 1996 (1997): 313-318.
    10.1016/B978-044482548-3/50052-4
  98. Bilotsky, Y.D.; Gasik, M.M.; Bilotsky, YD; Gasik, MM. "Gauge field theory for functional graded materials and components". Composites Part B: Engineering 28 1-2 (1997): 121-125. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030698491&partnerID=MN8TOARS.
    10.1016/S1359-8368(96)00026-1
  99. Popov, AA; Gasik, MM. "Rapidly solidified Fe-TiC composites: Thermodynamics and the peculiarities of microstructure formation in situ". Scripta Materialia 35 5 (1996): 629-634.
    10.1016/1359-6462(96)00199-6
  100. POPOV, AA; GASIK, MM. "NICKEL P/M SUPERALLOYS WITH ISOTROPIC CARBIDE REINFORCEMENT IN-SITU". Scripta Metallurgica Et Materialia 32 1 (1995): 49-55.
    10.1016/S0956-716X(99)80010-7
  101. Gasik, M.. "Principles of functional gradient materials and their processing by powder metallurgy". Acta Polytechnica Scandinavica, Chemical Technology and Metallurgy Series 226 (1995): 1-73. http://www.scopus.com/inward/record.url?eid=2-s2.0-0029431305&partnerID=MN8TOARS.
  102. Ostrik, P.N.; Belan, S.I.; Gasik, M.M.. "Application of technical-purity hydrogen in annealing and sintering of iron-based powder materials". Poroshkovaya Metallurgiya 3-4 (1995): 90-93. http://www.scopus.com/inward/record.url?eid=2-s2.0-0029259992&partnerID=MN8TOARS.
  103. Popov, Alexander A.; Gasik, Michael M.; Freedman, Vladimir S.. "Nickel powder metallurgy (P/M) superalloys with isotropic and gradient carbide reinforcement". Journal of Materials Synthesis and Processing 2 3 (1994): 143-150. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028423112&partnerID=MN8TOARS.
  104. Gasik, M.M.; Lilius, R.R.. "Evaluation of properties of WCu functional gradient materials by micromechanical model". Computational Materials Science 3 1 (1994): 41-49. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028499728&partnerID=MN8TOARS.
    10.1016/0927-0256(94)90151-1
  105. LILIUS, KR; GASIK, MM; JARVELA, VP; STROMBERG, S. "STUDIES OF INFILTRATION BY APPARENT THERMOGRAVIMETRY". Journal of Thermal Analysis 40 3 (1993): 915-922.
    10.1007/BF02546850
  106. GASIK, MM; SALE, FR. "SELF-STRENGTHENING AND HIGH-TEMPERATURE SINTERING IN BINDER-FREE SILICON-NITRIDE - A THERMOANALYTICAL STUDY". Journal of Thermal Analysis 40 1 (1993): 201-208.
    10.1007/BF02546570
  107. GASIK, MM; OSTRIK, PN. "HYDROGEN REDUCTION OF MOO3-FE MIXES STUDIED BY STEPWISE DIFFERENTIAL ISOTHERMAL ANALYSIS". Journal of Thermal Analysis 40 1 (1993): 313-319.
    10.1007/BF02546581
  108. Gasik, M.M.; Ostrik, P.N.; Popov, E.B.. "Non-oxide ceramics with nanocrystalline layers made by chemical liquid deposition". British Ceramic Transactions 92 5 (1993): 209-213. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027853268&partnerID=MN8TOARS.
  109. Gasik, M.I.; Porada, A.N.; Gasik, M.M.; Rudenko, V.K.; Petrunov, V.S.; Chikrin, G.V.. "Boron carbide and phase or size compositions of powders made from it". Stal' 5 (1993): 74-78. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027593252&partnerID=MN8TOARS.
  110. Porada, A.N.; Gasik, M.I.; Gasik, M.M.; Rudenko, V.K.; Petrunov, V.S.. "Phase and grain-size compositions of boron carbide powder made by an improved technique". Soviet Powder Metallurgy and Metal Ceramics 31 8 (1992): 716-720. http://www.scopus.com/inward/record.url?eid=2-s2.0-34250076182&partnerID=MN8TOARS.
    10.1007/BF00797823
  111. Porada, A.N.; Gasik, M.I.; Gasik, M.M.; Rudenko, V.K.; Petrunov, V.S.. "Phase and granulometrical composition of boron carbide powder produced by means of the improved production technique". Poroshkovaya Metallurgiya 8 (1992): 86-90. http://www.scopus.com/inward/record.url?eid=2-s2.0-0026904472&partnerID=MN8TOARS.
  112. Popov, A.A.; Ostrik, P.N.; Gasik, M.M.. "THERMODYNAMICS OF REDUCTION AND CARBIDE FORMATION IN THE Fe-Cr-O-C SYSTEM.". Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 4 (1987): 1-4. http://www.scopus.com/inward/record.url?eid=2-s2.0-0023469285&partnerID=MN8TOARS.
  113. Popov, A.A.; Ostrik, P.N.; Gasik, M.M.. "Thermodynamics of Reduction and Carbide Formation in the Cr-C-O System. | TERMODINAMIKA VOSSTANOVLENIYA I DARBIDOOBRAZOVANIYA V SISTEME Cr-C-O.". Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya 10 (1986): 1-3. http://www.scopus.com/inward/record.url?eid=2-s2.0-0023027589&partnerID=MN8TOARS.
  114. Gasik, M.M.; Gasik, M.I.. "THERMODYNAMIC STUDY OF CARBON-OXYGEN EQUILIBRIUM IN LIQUID IRON.". Russian metallurgy. Metally 3 (1985): 17-25. http://www.scopus.com/inward/record.url?eid=2-s2.0-0022335027&partnerID=MN8TOARS.

Other

Other output
  1. Novel approach to scaffolds for articular cartilage repair. 2018. Michael Gasik; Anne-Marie Haaparanta; Virpi Muhonen; Alexandra Zühlke; Kaisa Laine; Yevgen Bilotsky; Minna Kellomäki; Ilkka Kiviranta. https://research.aalto.fi/en/publications/d2ed3a14-095c-4427-affb-6a432305c212.
  2. High-output screening and biomechanical optimization of biomaterials for orthopaedic applications. 2018. Michael Gasik; Yevgen Bilotsky. https://research.aalto.fi/en/publications/f7a2f5c0-9e14-416e-ae2e-045356c022a3.
  3. MECHANOREGULATIVE COMPARISON OF CONVENTIONAL AND 3D-PRINTED TITANIUM. 2018. Michael Gasik; Nihal Engin Vrana; Julien Barthes. https://research.aalto.fi/en/publications/0d363d75-d622-4fc9-9419-f3ab25febfdb.
  4. METALLURGICAL GALLIUM ADDITIONS DEMONSTRATE A STRONG TIME-INCREASING ANTIBACTERIAL ACTIVITY WITHOUT ANY CELLULAR TOXICITY. 2018. Michael Gasik; Andrea Cochis; Barbara Azzimonti; Rita Sorrentino; Roberto Chiesa; Lia Rimondini. https://research.aalto.fi/en/publications/8fc40642-6204-4b11-91f0-1845c6352990.
Activities

Association member

Society Organization name Role
2019 - Current Tissue engineering and regenerative medicine international society - TERMIS-EU Member
2016 - Current European Connected Health Alliance (ECHA) Member
2015 - Current European Orthopaedic Research Society (EORS) Member
2014 - Current Academy of Sciences of the Highest Education of Ukraine Full member
2013 - Current TechNet Alliance Honorary member
2013 - Current Japanese Society for Promotion of Science, Alumni Association Finland Memeber of the board
1998 - Current Association of Mining and Metallurgical Engineers of Finland Member

Committee member

Activity description
Role 		Institution / Organization
2020/01/02 - Current School Academic Committee
Member
 Aalto University School of Chemical Engineering, Finland
2017 - Current Chairman of the board
President / Vice-president
 Seqvera Ltd. Oy, Finland
1994 - Current Member of the board
Member
 The International Advisory Committee on Functional Graded Materials, Japan
Distinctions

Other distinction

2020 Ambassador of the European Orthopaedic Research Society
European Orthopaedic Research Society, Germany
2015 The National State Prize of Ukraine
2013 M. M. Dobrohotov's Award for the outstanding achievements in the field of metallurgy and materials science
2007 Certificate of Appreciation
2004 The St. Georges Diploma of Recognition
1995 The Award for the best doctoral thesis of the year
1994 The Award of the Swiss Society of Materials Technology (SVMT)
1982 The Award of the National Ukrainian Academy of Sciences for the best research work
1981 The Diploma of Proficiency for the Best Student's Research Work