???global.info.a_carregar???
Diploma Engineer in Mechanical Engineering (5 year course Pre-Bolonha) in 2001, MSc in Mechanical Engineering ¿ Energy (Pre-Bolonha) in 2004 and PhD in Mechanical Engineering in 2009, Ana Moita was FCT Investigator (IF/00810/2015) in IN+/LARSyS since December 2016. She was FCT fellow (pos-doc fellowships SFRH/BPD/63788/2009 for 6years+ SFRH/BPD/109260/2015 for 2years) also in IN+/LARSyS. Her post-doc activities addressed control strategies of transport phenomena at liquid-solid interfaces, for multiphase flows. Ana Moita is an assistant professor in the Portuguese Military Academy since March 2020. A.S. Moita developed a strong background in wettability modification strategies, including micro-and-nanostructuring techniques applied to surface modification. In the last years, particularly in the context of her FCT Investigator research contract, she has deepened these activities for microscale applications, towards devising microfluidic devices for thermal (energy conversion) and biomedical applications. PI/co-Pi of 4 national projects (2016-2021), PI of 2 Transregional projects (2017-2020) and team leader of a Marie-Curie Project (2012-2016), Ana Moita is an experienced researcher who participated in the team of other 3 national+3 European projects. She is responsible of the Laboratory of Interfacial plus Microscale Phenomena in IN+/LARSYS. Currently she has several projects in collaboration with the industry including a large project with UFRJ - Brasil and Petrobrás, towards the development of a microchannel based heat sink to cool high concentration photovoltaic pannels. Through her work and scientific recognition she gained support from a strong national and international network including MIT, UT Austin, INESC-MN, INL, ITLR-Stuttgart University, where she was an invited researcher between 2010-2013, The University of Nottingham, Bergamo University, University of Rome Tor Vergata, Brighton University, Key Lab of Bionic Engineering in China, U. Macau Southampton Solent University, CSI, Darmstadt University, Oregon State University, Brno University of Technology, UFRJ and University S. Paulo Brasil. In November 2019, Ana Moita was invited to lecture a post-graduation course in Faculdade de Engenharia de São Carlos, Universidade de S. Paulo, Brazil (ref.: SEM5949, in the PhD course of Mechanical Engineering) entitled: "Microfluidic solutions to improve the performance of energy conversion systems". Being the supervisor of 6 PhD's (4 in progress), more than 50 Master Thesis , 3 Bachelor Thesis and 8 working stages (collaborative international programmes), A.S. Moita regularly lectures Thermodynamics, Fluid Mechanics, Heat and Mass Transfer, Energy and Mass Transfer, Experimental Methods in Energy and Environment among other subjects. The quality of her scientific work has been recognized by the scientific community. A.S. Moita was an invited lecturer in 12 international conferences/workshops in the last 5years. Also, A.S. Moita has been an invited lecturer for seminars in several international and national universities. She received 4 awards/distinctions. She is reviewer for numerous international conferences, more than 70 journals and 5 funding agencies (including ESA projects), being part of the scientific and or technical committee of 22 international conferences/workshops. She is the Newsletter Editor of ILASS-Europe since 2010, member of ISBE, INSTICC and Sociedade Portuguesa de Biomecânica. A.S. Moita published 8 book chapters, 76 peer reviewed journal papers, most in Q1 and Q2 journals and 130 conference papers (H=23, 1840 citations by 17 Jan 2024). More than half of these works was published in the last 5years. She is Guest-Editor in 5 SI's in Applied Science, Energies and Symmetry, journals from MDPI and part of the Editorial board of Heat Transfer Journal and of Experimental Thermal and Fluid Science, Elsevier, since august 2022.
Identification

Personal identification

Full name
Ana Sofia Oliveira Henriques Moita

Citation names

  • Moita, Ana
  • Moita, A. S.

Author identifiers

Ciência ID
B112-B5B1-E592
ORCID iD
0000-0001-9801-7617

Email addresses

  • moita.asoh@exercito.pt (Professional)

Addresses

  • Academia Militar. Av. Conde Castro Guimarães, 2720-113, Amadora, Amadora, Portugal (Professional)

Knowledge fields

  • Engineering and Technology - Mechanical Engineering - Thermodynamics

Languages

Language Speaking Reading Writing Listening Peer-review
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Italian Intermediate (B1) Intermediate (B1) Beginner (A1) Intermediate (B1)
French Beginner (A1) Intermediate (B1) Beginner (A1) Beginner (A1)
Portuguese Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
German Intermediate (B1) Intermediate (B1) Intermediate (B1) Intermediate (B1)
Education
Degree Classification
2009
Concluded
Doutoramento em Engenharia Mecânica (PhD Mechanical Engineering) (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Thermal and fluid dynamics of droplet wall interactions" (THESIS/DISSERTATION)
Aprovado
2004
Concluded
Mestrado em Engenharia Mecânica (pré-Bolonha) (MSc Mechanical Eng. Pré Bolonha) (Mestrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Dynamic behaviour of droplets impacting onto flat surfaces" (THESIS/DISSERTATION)
Aprovado (Parte escolar: 4 numa escala de 0 a 5)
2001
Concluded
Licenciatura em Engenharia Mecânica (Pré-Bolonha) (Licenciatura)
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Uma instalação experimental para estudar o comportamento dinâmico de gotas em superfícies" (THESIS/DISSERTATION)
14 valores (escala de 0 a 20)
Affiliation

Science

Category
Host institution
Employer
2020/03/08 - Current Researcher (Research) Universidade de Lisboa Instituto Superior Técnico, Portugal
Laboratório de Robótica e Sistemas de Engenharia, Portugal
2020/01/22 - Current Visiting Researcher (Research) Advanced Engineering Centre, Universidade de Brighton, United Kingdom
2016/12/01 - 2020/03/08 Researcher (Research) Laboratório de Robótica e Sistemas de Engenharia, Portugal
2010/01/01 - 2016/11/30 Researcher (Research) Laboratório de Robótica e Sistemas de Engenharia, Portugal
2013/11/01 - 2013/11/30 Visiting Researcher (Research) Universität Stuttgart Institut für Thermodynamik der Luft- und Raumfahrt, Germany
2011/10/01 - 2011/12/22 Visiting Researcher (Research) Universität Stuttgart Institut für Thermodynamik der Luft- und Raumfahrt, Germany
2010/10/01 - 2010/11/01 Visiting Researcher (Research) Universität Stuttgart Institut für Thermodynamik der Luft- und Raumfahrt, Germany
2005/04/01 - 2005/11/30 Researcher (Research) Faculdade de Engenharia - Universidade de Bergamo, Italy

Teaching in Higher Education

Category
Host institution
Employer
2023/02/20 - Current Assistant Professor (University Teacher) Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/03/09 - 2023/02/19 Assistant Professor (University Teacher) Instituto Universitário Militar, Portugal
Academia Militar, Portugal

Others

Category
Host institution
Employer
2016/12/01 - 2020/03/08 Investigador Auxiliar (Programa Investigador FCT Starting Grant) Laboratório de Robótica e Sistemas de Engenharia, Portugal
2016/01/01 - 2016/11/30 Post-Doc Researcher (FCT research grant ref: SFRH/BPD/109260/2015) Laboratório de Robótica e Sistemas de Engenharia, Portugal
2010/01/01 - 2015/12/31 Post-Doc Researcher (FCT research grant ref:SFRH / BPD / 63788 / 2009) Laboratório de Robótica e Sistemas de Engenharia, Portugal
2004/11/01 - 2009/12/21 Colaborator- PhD Student Mechanical Engineering (FCT research grant ref:SFRH / BD / 18250 / 2004) Laboratório de Robótica e Sistemas de Engenharia, Portugal
2001/11/19 - 2004/04/20 Colaborator- Aluna de Mestrado em Eng. Mecanica (MSc student) Laboratório de Robótica e Sistemas de Engenharia, Portugal
Projects

Contract

Designation Funders
2021/06/01 - Current Desenvolvimento de sistemas de gestão térmica e climatização de equipamento NBQ
02_2021 CINAMIL
Principal investigator
Ongoing
2018/08/01 - Current NFsCoolingSystem – Sistema avançado de microarrefecimento baseado em NanoFluidos inovadores e agitação acústica
PTDC/EME-SIS/30171/2017
Co-Principal Investigator (Co-PI)
Fundação para a Ciência e a Tecnologia, Portugal
Concluded
2022/07/15 - 2025/07/14 COOLUAV (2022-2025) – Sistema de arrefecimento da componente electrónica e baterias de veículos militares não tripulados – Call projetos I&D do Exército
02_2022 CINAMIL
Principal investigator
Academia Militar Centro de Investigação Desenvolvimento e Inovação da Academia Militar, Portugal
Ongoing
2021/12/15 - 2024/03/04 DESENVOLVIMENTO E DISSIPADORES TÉRMICOS BASEADOS EM MICRO-CANAIS PARA CÉLULAS FOTOVOLTAICAS DE ALTA CONCENTRAÇÃO
PEM23061/EMBRAPII
Principal investigator
Ongoing
2021/03/01 - 2024/02/28 COOLSPOT: Estratégias interfaciais de arrefecimento para tecnologias de conversão com elevadas potências de dissipação
PTDC/EME-TED/7801/2020
Co-Investigador responsável
Laboratório de Robótica e Sistemas de Engenharia, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2016/12/01 - 2021/11/30 BIOTERM - Development of reversible wetting smart interfaces for the design of biothermofluidic devices
IF/00810/2015
Principal investigator
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal
Ongoing
2018/08/24 - 2021/08/23 NFsCoolingSystem: – Sistema avançado de microarrefecimento baseado em NanoFluidos inovadores e agitação acústica
NORTE-01-0145-FEDER-029394
Researcher
Instituto de Ciências da Terra Polo do Universidade do Minho, Portugal
2018/04/01 - 2021/03/31 SMART HEAT - Surfaces Micro And nanometRically Treated for HEAt Transfer enhancement Scientific and Technological Cooperation
JICAM/0003/2017
Principal investigator
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal
Ongoing
2018/12/01 - 2019/11/30 Electrowave - ELECTROWetting heat pipes for cooling Applications in electric Vehicles
Principal investigator
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal
N/A
Ongoing
2013/06/01 - 2016/05/31 DINAMICS – Dynamics of INterfacial transport phenomenA in MIcro-scale energy Conversion Systems
RECI/EMS-SIS/0147/2012
Researcher
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal
N/A
Concluded
2012/04/01 - 2016/03/31 BIOAPPRONFS WETT - BIOMIMETIC APPROACHES OF NATURAL FUNCTIONAL SURFACES WITH HIERARCHICAL MICRO & NANO STRUCTURE AND THE EXTREME WETTABILITY
Researcher
University of Nottingham, United Kingdom
Concluded
2010/01/01 - 2014/12/31 DROP-DYNAMIC PROCESSES UNDER EXTREME CONDITIONS
Researcher
Universität Stuttgart Institut für Thermodynamik der Luft- und Raumfahrt, Germany
Concluded
2009/01/01 - 2014/12/31 SURWET-COOLS The effects of surface wettability and roughness on microchannel evaporative heat transfer - application to cooling
PTDC/EME-MFE/109933/2009
Researcher
Laboratório de Robótica e Sistemas de Engenharia, Portugal
Concluded
2005/01/01 - 2007/12/31 DYNAMIC BEHAVIOUR OF CRYOGEN SPRAY COOLING
POCTI/EME/57944/2004
Researcher
Laboratório de Robótica e Sistemas de Engenharia, Portugal
Concluded
2005/04/01 - 2005/11/30 ENK-CT-2002-50518 - Marie Curie Training Sites
ENK-CT-2002-50518
Research Fellow
Faculdade de Engenharia - Universidade de Bergamo, Italy
Concluded
2001/04/01 - 2004/12/31 DIRECT INJECTION ENGINE SPRAY PROCESSES – MECHANISMS TO IMPROVE PERFORMANCE
Researcher
Laboratório de Robótica e Sistemas de Engenharia, Portugal
Concluded
2001/04/01 - 2004/12/31 FLOW AND HEAT TRANSFER CHARACTERISTICS OF EVAPORATING IMPINGING SPRAYS
POCTI/1999/EME/32960. 2001-2004
Researcher
Laboratório de Robótica e Sistemas de Engenharia, Portugal
Concluded

Other

Designation Funders
2019/10/27 - 2019/11/11 Microfluidic solutions to enhance the energy conversion in solar panels.
Processo 88887.370219/2019-00 6685 - PRINT - PROGRAMA INSTITUCIONAL DE INTERNACIONALIZAÇÃO
Principal investigator
Universidade de São Paulo Câmpus de São Carlos, Brazil
Concluded
Outputs

Publications

Book
  1. Bernardino Alexandre; Francisco, Alexandre; Moita, A. S.; Oliveira, Arlindo; Casaca, Augusto,; Silva, Beatriz; Montemor, Fátima; et al. Ideias. Lisboa, Portugal: IST Press. 2021.
    Published
Book chapter
  1. Moita, A. S.. "A ciência das gotas e a sua importância em época de pandemia". In Ideias: sobre ciência, tecnologia e ensino superior pela comunidade do Instituto Superior Técnico. Lisboa, Portugal: IST Press, 2021.
    Published
  2. Maia, I.; Rocha, C.; Pontes, P.; Cardoso, V.; Miranda , J.M.; Moita, A.S.; Minas, G.; Moreira, A.L.N.; Lima, R.. "Heat transfer and fluid flow investigations in PDMS microchannel heat sinks fabricated by means of a low cost 3D printer.". In Advances in Microfluidic Technologies for Energy and Environmental Applications, 51-67. IntechOpen, 2020.
    Published • 10.1007/978-981-10-2784-0_3
  3. Moita, A. S.; Caldeira, C.; Golçalves, I.; Lima, R.; Vega, E. J.; A. L. N. Moreira. "Analogue fluids for cell deformability studies in microfluidic devices". In Biomedical Engineering Systems and Technologies. Series: Communications in Computer and Information Science, edited by A. Roque et al., 1-12. Springer International Publishing AG, part of Springer Nature Switzerland, 2020.
    Published
  4. A. S. Moita; C. Caldeira; I. Gonçalves; R. Lima; E. J. Vega; A. L. N. Moreira. "Analogue Fluids for Cell Deformability Studies in Microfluidic Devices". 2020.
    10.1007/978-3-030-46970-2_5
  5. Moita, Ana. "Challenges and advances in measuring temperatures at liquid-solid interfaces". In The art of measuring in thermal sciences, edited by Meyer, Joshua; de Paepe, Michel. CRC Press/Taylor & Francis, 2019.
    Accepted
  6. A. S. Moita; F. Jacinto; F. Mata; A. L. N. Moreira. "Design and Optimization of an Open Configuration Microfluidic Device for Clinical Diagnostics". 2019.
    10.1007/978-3-030-29196-9_3
  7. Malavasi,; I.; Teodori, E.; Moita, A.S.; Moreira, A.L.N.; Marengo, M.; Moreira, A.L.N. Marengo, M.. "Wettability effect on pool boiling: a review.". edited by J.; Thome; J. Thome. 2018.
  8. Moita, A. S.; Vieira, D.; Mata, F.; Pereira, J.; Moreira, A. L. N.; Moita, A. S.; Moreira, A.L.N.. "Microfluidic Devices Integrating Clinical Alternative Diagnostic Techniques Based on Cell Mechanical Properties". In Biomedical Engineering Systems and Technologies, 74-93. Springer Berlin Heidelberg, 2018.
    Published • 10.1007/978-3-319-94806-5_4
  9. A. L. N. Moreira, A. S. Moita, S. Chandra. "Droplet impact on a solid surface - Chapt. 8 of Handbook of atomization and sprays: theory and applications. Ed. Nasser Ashgriz, Springer". 2011.
    10.1007/978-1-4419-7264-4_8
Conference abstract
  1. Zhelezny, V; Khliyeva, O.; Nikulin, A.; Nikulina, A.; Motovoy, I.; Melnyk, O.; Borisov, V.; et al. "Effect of fullerenes C60 on heat capacity, density, thermal conductivity and viscosity of tetralin". Paper presented in 6th International Conference: Thermophysical and Mechanical Properties of Advanced Materials, THERMAN 2019, Cesme, 2019.
    Published
  2. Moita, A.S.; Malý, M.; Moreira, A.L.N.. "Nanoengineered wettability for heat transfer enhancement in spray cooling". Paper presented in 1st European Symposium on Nanofluids – ESNf2017, Lisboa, 2018.
    Published
  3. Malý, M.; Moita, A.S.; Jedelsky, J.; Ribeiro, A. P. C.; Moreira, A.L.N.. "Nanofluid sprays for cooling applications". Paper presented in DIPSI 2018 – Droplet Impact Phenomena & Spray Investigations Workshop, Bergamo, 2018.
    Published
  4. Andredaki, M.; Georgoulas, A.; Miche, N.; Teodori, E.; Moita, A.S.; Moreira, A.L.N.; Marengo, M.. "Numerical Investigation of oscillating vapour slugs within heated microchannels in saturated flow boiling conditions". Paper presented in 5th European Conference on Microfluidics – µFlu18, Estrasburgo, 2018.
    Published
Conference paper
  1. Perez, Mariana; Pedro Pontes; A.L.N. Moreira; Moita, A. S.. "High-speed infrared flow boiling visualization in microchannels with modified surfaces". Paper presented in 27th ABCM International Congress of Mechanical Engineering, Floripa, 2023.
    Published
  2. Moita, A. S.. Corresponding author: Moita, A. S.. "Cooling system based on minichannels for thermal management of CBRN equipment". Paper presented in 2023 International Workshop on Technologies for Defense and Security, Roma, 2023.
    Published
  3. Moita, A. S.. Corresponding author: Moita, A. S.. "Bioinspired ennahnced surfaces to improve phase change cooling systems for industry and military applications". Paper presented in 7th International Conference of Bionic Engineering (ICBE 2023), Wuhan, 2023.
  4. Moita, A. S.. Corresponding author: Moita, A. S.. "Evaluation of the use of nanofluids in a microchannel based cooler to be integrated in a PV panel.". Paper presented in 8th International Conference on Micro and Nanoflows (MNF 2023), Padova, 2023.
    Published
  5. Moita, A. S.. "Spray dynamics of conventional and alternative jet fuel". Paper presented in ILASS-Europe Meeting 2023, Naples, 2023.
    Published
  6. Moita, A. S.. Corresponding author: Moita, A. S.. "Thermal management of CBRN equipment using microchannels based heat sinks". Paper presented in 11th International Conference on Multiphase Flow, Kobe, 2023.
    Published
  7. Pedro Pontes; Gonçalves, I.; A.L.N. Moreira; Moita, A. S.. Corresponding author: Moita, A. S.. "Bubble dynamics and heat transfer in microchannel flow boiling: detailed study on bubble". Paper presented in 11th International Conference on Multiphase Flow, Kobe, 2023.
    Published
  8. Souza, Andrews; Rodrigues, Diana; Souza, Maria; Ferrera, Conrado; Ribeiro, João; Lima, Rui; Moita, Ana. "In Vitro Flow Study in an Intracranial Aneurysm Biomodel Manufactured by Additive Manufacturing". 2023.
    10.5220/0011652100003414
  9. Gonçalves, Inês; Pinho, Diana; Zille, Andrea; Kaji, Hirokazu; Minas, Graça; Lima, Rui; Sousa, Patrícia; Moita, Ana. "Analysis of a Simple Method to Change the Wettability of the PDMS Surface for Biomicrofluidic Applications". 2023.
    10.5220/0011651900003414
  10. Moita, A. S.. Corresponding author: Moita, A. S.. "Sistema de arrefecimento da componente eletrónica e baterias em veículos militares não tripulados". Paper presented in 4º Encontro de I&D em Ciências Militares. Academia da Força Aérea,, Sintra, 2022.
    Published
  11. Moita, A. S.. Corresponding author: Moita, A. S.. "Sistema de arrefecimento corporal no uso de fatos de protecção nuclear, biológica, química e radiológiva - NBQR". Paper presented in 4º Encontro de I&D em Ciências Militares. Academia da Força Aérea,, Sintra, 2022.
    Published
  12. Moita, A. S.. Corresponding author: Moita, A. S.. "Thermal management of CBRN equipment using microchannels based heat sink". Paper presented in International Society of Military Sciences ISMS Conference, 2022.
    Published
  13. Moita, A. S.. "A simple method to modify the wettability of the PDMS surface for biomedical applications". Paper presented in International Workshop on Additive Manufacturing and STEAM Education IWAM, 2022.
    Published
  14. Moita, A. S.. Corresponding author: Moita, A. S.. "Desenvolvimento de uma mascara de protecção individual de baixo custo por estereolitografia". Paper presented in International Workshop on Additive Manufacturing and STEAM Education IWAM, 2022.
    Published
  15. Moita, A. S.. Corresponding author: Moita, A. S.. "Development of a modular thermal management system for CBRN equipment by addictive manufacturing using stereolithography". Paper presented in International Workshop on Additive Manufacturing and STEAM Education IWAM, 2022.
    Published
  16. Moita, A. S.. "Cooling performance of an acrylic serpentine with a rectangular cross section". Paper presented in International Workshop on Additive Manufacturing and STEAM Education IWAM, 2022.
  17. Moita, A. S.. "The impact of high particles concentration in a biofuel droplet combustion". Paper presented in 31st Conference on Liquid Atomization and Spray Systems, 6-8 September 2022 (Virtual Conference), 2022.
    Published
  18. Pedro Pontes; Gonçalves, Iva; A.L.N. Moreira; Moita, A. S.. "Bubble dynamics and heat transfer in microchannel fow boiling: detailed study on bubble dynamics under controlled bubbly flow conditions". Paper presented in HEFAT-ATE 2022 16th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 8-10 August 2022 (Virtual Conference)., Virtual Conference, 2022.
    Published
  19. Moita, A. S.; Panão, Miguel; Miguel Sanches. "Potential contamination of high-speed dental handpiece by spray impact on the mouth surface". Paper presented in 20th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, Lisboa, 2022.
  20. Moita, A. S.. "A simple method to modify the PDMS surface wettability for biomicrofluidic applications". Paper presented in 20th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, Lisboa, 2022.
    Published
  21. Moita, A. S.; A.L.N. Moreira; Coutinho, Gonçalo; Massimiliano Rossi. "3D particle tracking velocimetry applied to platelet-size particles in red blood cells suspensions flows through squared microchannels". Paper presented in 20th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, Lisboa, 2022.
    Published
  22. Moita, A. S.. "Visualization of a blood analogue flowing in an organ-on-a-chip platfrom.". Paper presented in 9th Word Congress in Biomechanics, Taipe, 2022.
    Published
  23. Moita, A. S.. "Biomimetic fluid flow in microchannels with complex geometries". Paper presented in 9th Word Congress in Biomechanics, 2022.
    Published
  24. Moita, A. S.. Corresponding author: Moita, A. S.. "Thermal management of CBRN equipment using PDMS microchannels based heat sinks with nanofluids". Paper presented in 3rd WORLD CONFERENCE ON ADVANCED MATERIALS FOR DEFENSE, AUXDEFENSE 2022, 2022.
    Published
  25. Moita, A. S.. "Experimental investigation of disruptive burning phenomena on nanofuel droplets". Paper presented in 20th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, Lisboa, 2022.
    Published
  26. Moita, A. S.. "Fluid flow of biomimetic fluids in complex microchannels for microcirculation studies". Paper presented in IX International Conference on Computational Bioengineering – ICCB 2022, Lisboa, 2022.
    Published
  27. Moita, A. S.. "Separation microfluidic devices fabricated by different milling processes". Paper presented in 15th International Conference on Biomedical Electronics and Devices, BIODEVICES 2022, Online event, 2022.
    Published
  28. Dias, Francisco; Ferrão, Inês; Mendes, Miguel; Moita, Ana; Silva, Andre R.. "Numerical Analysis of a Single Droplet Combustion of Jet-A1 and Alkanes". 2022.
    10.2514/6.2022-3878
  29. Moita, A. S.. "Enhancement of the PDMS wettability using thin film deposition for microfluidic systems, organ-on-a-chip platforms and biomedical devices". Paper presented in 9th Word Congress in Biomechanics, 2022.
    Published
  30. Moita, A. S.. "Blood cells and PDMS microparticles separation in a passive microfluidic device having a crossflow filter". Paper presented in 9th Word Congress in Biomechanics, 2022.
  31. Moita, A. S.. "Sistemas de gestão térmica e climatização em equipamento NBQ". Paper presented in 3º Encontro de Investigação e Desenvolvimento em Ciências Militares, Online event, 2021.
    Published
  32. Moita, A. S.. "Complex fluid flows in mini and microchannels with micro and nano enhanced surfaces for advanced heat recovery systems". Paper presented in 16th Conference on Sustainable Development of Energy, Water and Environment Systems, 16th SEWDES 2021, Dubrovnic, 2021.
    Published
  33. Moita, Ana. "Experimental characterization of the flow and heat transfer inside a horizontal circular tube using C60/tetralin nanofluid". Paper presented in 12º Congresso Nacional de Mecânica Experimental – CNME2020, Leiria, 2021.
    Published
  34. Moita, A. S.. "Thermographical study of geometry and phase change inuence on PDMS Microchannel liquid cooling devices". Paper presented in EUROTHERM 2021 - 8th European Thermal Sciences Conference, Online event, 2021.
    Published
  35. Moita, Ana. "Pool boiling of nanofluids on biphilic surfaces". Paper presented in EUROTHERM 2021 - 8th European Thermal Sciences Conference, 2021.
    Published
  36. Ana Moita. "Thermal efficiency of metal foams on pool boiling. anofluid spray cooling for industrial applications". Paper presented in EUROTHERM 2021 - 8th European Thermal Sciences Conference, Online event, 2021.
    Published
  37. Moita, A. S.. Corresponding author: Moita, A. S.. "Nanofluid spray cooling for industrial applications". Paper presented in 3rd European Symposium on Nanofluids – ESNF 2021. 9-10 September 2021, Online event, 2021.
    Published
  38. Moita, A. S.. "Single droplet combustion of aluminum nanoparticles added to a biofuel: Effect of particle concentration and ambient temperature". Paper presented in ICLASS Ediburgh 2021, Online event, 2021.
    Published • https://doi.org/10.2218/iclass.2021.5920
  39. Moita, A. S.. Corresponding author: Moita, A. S.. "Heat transfer in nanofluid spray cooling of a solid heated surface for cooling systems in civil and military applications". Paper presented in ICLASS Ediburgh 2021, Online event, 2021.
    Published • https://doi.org/10.2218/iclass.2021.6000
  40. Moita, A. S.. "Design optimization of microchannel geometry using a genetic algorithm parallel with Openfoam". Paper presented in ATE HEFAT 2021 – Heat Transfer, Fluid Mechanics and Thermodynamics, Applied Thermal Engineering, Online event, 2021.
    Published
  41. Gonçalves, Ines; Madureira, M.; Miranda, J.; Schütte, H.; Moita, A. S.; Minas, G.; Gassmann, S.. "Separation microfluidic device fabricated by micromilling techniques". Paper presented in he 1st International Conference on Micromachines and Application (ICMA 2021), 2021.
    Published
  42. Moita, A. S.; Souza, R.R.; Faustino, V.; Gonçalves, I. M.; Miranda, J.; Moreira, A.L.N.; Banobre-Lopez, M.; Lima, R.. "Experimental studies of the sedimentation and thermal conductivity of two different nanofluids". Paper presented in The 1st International Conference on Micromachines and Application (ICMA 2021), Online, 2021.
    Published
  43. Ferrão, I. A. S.; Mendes, M. A. A.; Moita, A. S.. "The influence of aluminum particles in a Hydroprocessed Vegetable Oil combustion". Paper presented in 10th European Combustion Meeting ECM2021 - Virtual Edition, Online, 2021.
    Published
  44. Gonçalves, I.; Varelas, J.; Coutinho, G.; Moita, A.; Pinho, D.; Lima, R.; Miranda, J.; et al. "Dynamic Flow Behaviour of a Blood Analogue Fluid in Microchannels for Microcirculation Studies". 2021.
    10.5220/0010343901750181
  45. Ferrão, I; Moita, A. S.; Mendes, M.; Silva, A.; Costa, M.. "Single droplet combustion of aluminum nanoparticles added to a biofuel". Paper presented in ILASS-Asia 2020, Zhenjiang, 2020.
    Published
  46. Pontes, P; Freitas, E.; Cautela, R.; Moita, Ana; Miranda, J.; Lima, R.; Ribeiro, A. P. C.; Moreira, A. L. N.. "Pool boiling of nanofluids on biphilic surfaces". Paper presented in 3rd International Conference on Interfacial Phenomena and Heat-Mass-Transfer, 2020.
    Accepted
  47. Moita, Ana. "Assessment of computational cell mode benefits for optimization of microfluidic devices". Paper presented in 13th International Joint Conference on Biomedical Engineering Systems and Technologies, Biodevices 2020, Valletta, 2020.
    Published
  48. Moita, A. S.; Gonçalves, Ines; Caldeira, C.; Moreira, A.L.N.. "Predicting cell deformability behaviour from analogue fluids in microfluidic devices". Paper presented in 3rd Workshop on modeling of biological cells, fluid flow and microfluidics, Vratna, 2020.
    Published
  49. Manetti, L.L.; Oliveira Henriques Moita, A.S.; Cardoso, E.M.; Moita, Ana; Cardoso, E. M.. "A predictive model for boiling heat transfer coefficient of dielectric fluids on metal foams". Paper presented in 5th Thermal and Fluids Engineering Conference - TFEC 2020, New Orleans, 2020.
    Published • 10.1615/TFEC2020.boi.032028
  50. Jacinto, F.; Moita, A.S.; Moreira, A.L.N.. "Droplet dynamics under electrostatic actuation for clinical diagnostics". 2020.
  51. Freitas, E.; Bento, D.; Lima, R.; Miranda, J.; Moita, A. S.; Moreira, A.L.N.. "Numerical study of the effect surface properties in boiling". Paper presented in 5th World Congress on Momentum, Heat and Mass Transfer (MHMT'20), Lisboa, 2020.
    Published
  52. Bohiniková, A.; Maia, I.; Smiešková, M.; Bugánová, A.; Moita, A.S.; Cimrák, I.; Lima, R.A.. "Assessment of computational cell model benefits for optimization of microfluidic devices". 2020.
  53. Pontes, P.; Cautela, R.; Moita, A. S.; Teodori, E.; Moreira, A.L.N.; Liu, Y.. "Development and test of biphilic surfaces with biomimetic patterns for heat transfer enhancement". Paper presented in 6th International Conference of Bionic Engineering – ICBE 2019, Changchun, 2019.
    Published
  54. Pontes, P.; Cautela, R.; Teodori, E.; Moita, Ana; Georgoulas, A.; Moreira, A.L.N.. "Bubble dynamics and heat transfer on biphilic surfaces". Paper presented in 16th UK Heat Transfer Conference, 2019.
    Published
  55. Matos, F. M.; Liang, Q. J.; Pontes, P.; Moita, Ana; Moreira, A.L.N.. "Time resolved thermographic characterization of heat transfer and fluid dynamics in nanofluid droplets for cooling applications". Paper presented in 29th European Conference on Liquid Atomization and Spray Systems ILASS 2019 Paris, Paris, 2019.
    Published
  56. Pontes, P.; Cautela, R.; Teodori, E.; Liu, Y.; Moita, A. S.; Moreira, A.L.N.. "Effect of pattern geometry on bubble dynamics and heat transfer on biphilic surfaces". Paper presented in 14th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics – HEFAT 2019, Wicklow, 2019.
    Published
  57. Moita, Ana; Pontes, P.; Matos, F. M.; Liang, Q. J.; Ribeiro, A. P. C.; Moreira, A.L.N.. "Time and spatially resolved fluid dynamics and heat transfer characterization of nanofluid droplets impacting on heated surfaces". Paper presented in 1st International Conference on Nanofluids (ICNf) and the 2nd European Symposium on Nanofluids (ESNf), 2019.
    Published
  58. Pontes, P.; Cautela, R.; Teodori, E.; Moita, A. S.; Moreira, A.L.N.. "Bubble dynamics and heat transfer on biphilic surfaces". Paper presented in 10th International Conference on Multiphase Flow – ICMF 2019, Rio de Janeiro, 2019.
    Published
  59. Moita, A. S.; Caldeira, C.; Jacinto, F.; Lima, R.; Vega, E. J.; Moreira, A.L.N.; Moita, A.; Vega, E.; Moreira, A.. "Cell deformability studies for clinical diagnostics: tests with blood analogue fluids using a drop based microfluidic device". Paper presented in 12th International Conference on Biomedical Electronics and Devices – Volume 1: BIODEVICES 2019, Praga, 2019.
    Published • 10.5220/0007578100990107
  60. Teodori, E.; Andredaki, M; Georgoulas, A.; Moita, A.S.; Moreira, A.L.N.. "Enhanced VOF-based direct numerical simulations of slug flow boiling within micro-channels with smooth and finned heated walls". Paper presented in 6th International Heat Transfer Conference - IHTC-16, Beijing, 2018.
    Published • 10.1615/IHTC16.mpf.023596
  61. M. Malý; Moita, A.S.; Jedelsky, J.; Moreira, A.L.N.. "Effect of nanoparticles concentration in the characteristics of nanofluid sprays for cooling applications". Paper presented in 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, Lisboa, 2018.
    Published
  62. Harrison, M.; Gess, J.; Moita, A.S.. "Novel boiling heat transfer thermal efficiency parameter for microscale finned heat sinks using two-phase particle image velocimetry". Paper presented in 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, Lisboa, 2018.
    Published
  63. Andrade, F.; Ferreira, F.; Moita, A.S.; Santos, H.. "Transitional flow regime heat transfer and friction factor in smooth tubes". Paper presented in 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy systems – ECOS 2018, 2018.
    Published
  64. Abreu, V.; Harrison, M.; Gess, J.; Moita, Ana. "Two-phase thermosiphon cooling using integrated heat spreaders with copper microstructures". Paper presented in Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems ITherm 2018, San Jose, 2018.
    Published • 10.1109/ITHERM.2018.8419644
  65. Jacinto, F.; Moita, A.S.; Moreira, A.L.N.. "Effect of biofluids rheology and wettability on droplet dynamics in lab-on-chip systems for cancer diagnostics". Paper presented in 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 3rd Conference on Imaging and Visualization, Lisboa, 2018.
    Published
  66. Harrison, M.; Gess, J.; Moita, Ana. "Characterization of quenching fluid flow paths to a high heat flux processor using two-phase image velocimetry". Paper presented in Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM), San Jose, 2018.
    Published
  67. Jacinto, F.; Moita, A.S.; Moreira, A.L.N.. "Design, test and fabrication of a droplet based microfluidic device for clinical diagnostics". Paper presented in 11th International Conference on Biomedical Electronics and Devices, Funchal, 2018.
    Published
  68. Teodori, E.; Pontes, P.; Moita, A.S.; Moreira, A.L.N.. "On the process of bubble growing and departure on hydrophilic, superhydrophobic and biphilic surfaces". Paper presented in 16th International Heat Transfer Conference - IHTC-16, Beijing, 2018.
    Published • 10.1615/IHTC16.bae.022252
  69. Jacinto, F.; Moita, A.S.; Moreira, A.L.N.. "Droplet dynamics under electrostatic actuation for clinical diagnostics". Paper presented in 14th Triennial International Conference on Liquid Atomization and Spray Systems, Chicago, 2018.
    Published
  70. Teodori, E.; Andredaki, M.; Georgoulas, A.; Moita, A.; Moreira, A.; Marengo, M.. "Enhanced VOF-based direct numerical simulations of slug flow boiling within micro-channels with smooth and finned heated walls". 2018.
    10.1615/ihtc16.mpf.023596
  71. Moita, A.S.; Andrade, F.; Ferreira, F.; Santos, H.. "Transitional flow regime heat transfer and friction factor in smooth tubes". 2018.
  72. Pontes, P.; Teodori, E.; Moita, A.S.; Moreira, A.L.N.. "Time resolved thermographic analysis of droplet impacts onto heated surfaces under extreme wetting scenarios". 2017.
    Published • 10.4995/ILASS2017.2017.5012
  73. Teodori, E.; Pontes, P.; Moita, A.S.; Moreira, A.L.N.; Georgoulas, A.; Marengo, M.. "Experimental and numerical study on sensible heat transfer at droplet/wall interactions". Paper presented in 28th European Conference on Liquid Atomization and Spray Systems ILASS Valencia 2017, Valencia, 2017.
    Published • 10.4995/ILASS2017.2017.5024
  74. Vieira, D.; Mata, F.; Moita, A.; Moreira, A.. "Microfluidic prototype of a lab-on-chip device for lung cancer diagnostics". Porto, 2017.
    Published
  75. Moita, A.S.; Mata, F.; Kumar, R; Moreira, A.L.N.; Cardoso, S.; Prazeres, D.M.F.. "Fluid dynamics of biodroplets under electrostatic actuation". Paper presented in 7th Portuguese Congress on Biomechanics (CNB2017), Guimarães, 2017.
    Published
  76. Santos, H.; Morgado, J.; Martinho, N.; Pereira, J.; Moita, A.. "Selecting and Optimizing a Heat Exchanger for Automotive Vehicle Rankine Cycle Waste Heat Recovery Systems". 2017.
    Published • 10.1016/j.egypro.2016.12.181
  77. Ferreira, Filipe; Santos, Helder; Moreira, António L.; Moita, A.S.. "Heat transfer and fluid flow in pipes in the transitional flow regime and high heat fluxes for an automotive heat". Paper presented in 10º Congresso Nacional de Mecânica Experimental – CNME, Lisboa, 2016.
    Published
  78. Mata, F.; Moita, A.S.; Kumar, R; Cardoso, S.; Prazeres, D.M.F.; Moreira, A.L.N.. "Effect of surface wettability on the spreading and displacement of biofluid drops in electrowetting". Paper presented in ILASS – Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems, Brighton, 2016.
    Published
  79. Roth, N.; Reitzle, M.; Franke, M.; Moita, A.S.; Weigand, B.. "Shear thinning liquids impacting on dry Solid walls: comparison between numerical simulations and experiments". Paper presented in ILASS – Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems, Brighton, 2016.
    Published
  80. Vieira, D.; Moita, A.S.; Moreira, A.L.N.. "Non-intrusive wettability characterization on complex surfaces using 3D Laser Scanning Confocal Fluorescence Microscopy". Paper presented in 18th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, Lisboa, 2016.
    Published
  81. Teodori, E.; Palma, T.; Valente, T.; Moita, A.S.; Moreira, A.L.N.. "Bubble dynamics and heat transfer for pool boiling on hydrophilic, superhydrophobic and biphilic surfaces". Paper presented in 7th European Thermal-Sciences Conference, Eurotherm 2016, Krakow, 2016.
    Published • 10.1088/1742-6596/745/3/032132
  82. Moita, A.S.. "Characterization of bioflows as a clinic diagnostic tool". Paper presented in Invited Session Keynote, 5th International Conference of Bionic Engineering – ICBE 2016, Ningbo, 2016.
    Published
  83. Moura, M.; Teodori, E.; Moita, A.S.; Moreira, A.L.N.. "2 phase microprocessor cooling system with controlled pool boiling of dielectrics over micro-and-nano structured Integrated Heat Spreaders". Paper presented in 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, 2016.
    Published • 10.1109/ITHERM.2016.7517574
  84. Valente, T.; Malavasi, I.; Teodori, E.; Moita, A.S.; Marengo, M.; Moreira, A.L.N.. "Effect of extreme wetting scenarios on pool boiling". Paper presented in UK Heat Transfer Conference, UKHTC 2015, Edimburgo, 2015.
    Published
  85. Valente, T.; Teodori, E.; Moita, A.S.; Moreira, A.L.N.. "Effect of wettability on nucleate boiling". Paper presented in 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Kruger National Park, 2015.
    Published
  86. Ramos, J.A.; Moita, A.S.; Prazeres, D.M.F.; Moreira, A.L.N.. "Dynamics of droplets of biological fluids over enhanced surfaces with and without electrostatic actuation". Paper presented in 26th Annual Conference on Liquid Atomization and Spray Systems – ILASS 2014, Bremen, 2014.
    Published
  87. Moita, A.S.; Herrmann, D.; Moreira, A.L.N.. "Experimental characterization of the post-impact behavior of non-Newtonian droplets". Paper presented in 17th International Symposium on Laser Techniques Applied to Fluid Mechanics, Lisboa, 2014.
    Published
  88. Moita, A.S.. "Heat and mass transfer at interfaces between solid surfaces and non-Newtonian fluids". Paper presented in (Invited keynote lecture). International Heat Transfer Symposium – IHTS 2014, Beijing, 2014.
    Published
  89. Teodori, E.; Moita, A.S.; Moreira, A.L.N.. "Study of the combined effects of liquid properties and surface micropatterning on pool boiling heat transfer". Kioto, 2014.
    Published
  90. Moita, A.S.. "Thermal and fluid dynamic processes occurring during liquid boiling over micro-and-nano enhanced surfaces". Paper presented in (Invited keynote lecture). 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics – HEFAT 2014, Orlando, 2014.
    Published
  91. Teodori, E.; Moita, A.S.; Moreira, A.L.N.. "Pool boiling heat transfer over micro-treated surfaces: a mechanistic approach". Paper presented in 5th International Conference on Heat Transfer and Fluid Flow in Microscale - HTFFM – V, Marselha, 2014.
    Published
  92. Teodori, E.; Moita, A.S.; Moreira, A.L.N.. "Study of the combined effects of liquid properties and surface micropatterning on pool boiling heat transfer". 2014.
    10.1615/ihtc15.pbl.009004
  93. Moita, A.S.; Herrmann, D.; Moreira, A.L.N.. "Droplet impacts of non-Newtonian fluids for bioengineering applications". Paper presented in 24th Annual Conference on Liquid Atomization and Spray Systems – ILASS 2013, Chania, 2013.
    Published
  94. Pereira, P.M.M.; Moita, A.S.; Moreira, A.L.N.; Monteiro, G.A.; Prazeres, D.M.F.. "Characterization of the topography and wettability of biomimetic replicas of the surfaces of rose petals and clover leaves". Paper presented in 4th International Conference of Bionic Engineering – ICBE 2013, Nanjing, 2013.
    Published
  95. Teodori, E.; Moita, A.S.; Moreira, A.L.N.. "Pool boiling heat transfer over micro-patterned surfaces: experiments and theory". Paper presented in 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics - ExHFT-8, Lisboa, 2013.
    Published
  96. Malavasi, I.; Teodori, E.; Moita, Ana; Marengo, M.; Moreira, A.L.N.. "Pool boiling over enhanced surfaces under a wide range of wettability conditions". Paper presented in 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics - ExHFT-8, 2013.
    Published
  97. Teodori, E.; Moita, A.S.; Moreira, A.L.N.. "Evaluation of pool boiling heat transfer over micro-structured surfaces by combining high-speed visualization and PIV measurements". Paper presented in PIV 2013, Delf, 2013.
    Published • 10.1115/imece2007-42581
  98. Moita, A.S.; Sauer, S.; Moreira, A.L.N.. "Secondary atomization of micrometric fuel droplets impinging on heated targets". Paper presented in 16th International Symposium on Laser Techniques Applied to Fluid Mechanics, 2012.
    Published
  99. Moita, A.S.; Teodori, E.; Moreira, A.L.N.. "Enhancement of pool boiling heat transfer by surface micro-structuring". Paper presented in 6th European Thermal Science Conference, Eurotherm 2012, 2012.
    Published • 10.1088/1742-6596/395/1/012175
  100. Moita, A.S.; Teodori, E.; Moreira, A.L.N.. "Effects of surface micro-structuring on the nucleation mechanisms". Paper presented in IV National Conference on Fluid Mechanics, Thermodynamics and Energy - MEFTE 2012, 2012.
    Published
  101. Moita, A.S.; Moreira, A.L.N.. "From single droplet impact to micrometric droplet chains: scaling the effect of surface topography". Paper presented in 12th International Conference on Liquid Atomization and Spray Systems - ICLASS 2012, 2012.
    Published
  102. Teodori, E.; Moita, A.S.; Moreira, A.L.N.. "Pool boiling mechanisms over micro-textured surfaces". Paper presented in 16th International Symposium on Laser Techniques Applied to Fluid Mechanics, Lisboa, 2012.
    Published
  103. Moita, A.S.; Moreira, A.L.N.. "From single droplet impact to micrometric droplet chains: Scaling the effect of surface topography". 2012.
  104. Moita, A.S.; Teodori, E.; Moreira, A.L.N.. "Influence of surface topography and wettability in the boiling mechanisms". Paper presented in 24th Annual Conference on Liquid Atomization and Spray Systems - ILASS-2011, Estoril, 2011.
    Published
  105. Tata, M.; Moita, A.S.; Moreira, A.L.N.. "tudy of the effect of the topographical length scales on the wettability as strategy to control the interfacial phenomena at droplet-wall interactions". Paper presented in 24th Annual Conference on Liquid Atomization and Spray Systems - ILASS-2011, Estoril, 2011.
    Published
  106. Moita, A.S.; Roth, N.; Gomaa, H.; Weigand, B.; Moreira, A.L.N.. "Effect of the properties of the surrounding gas on the dynamic behaviour of bouncing droplets on a solid surface". Paper presented in 24th Annual Conference on Liquid Atomization and Spray Systems - ILASS-2011, 2011.
    Published
  107. Moita, A.S.; Moreira, A.L.N.. "Assessment of heat transfer measurements at droplet/wall interactions: relation with the impact conditions". Paper presented in 23rd Annual Conference on Liquid Atomization and Spray Systems - ILASS 2010, Brno, 2010.
    Published
  108. Moita, A.S.; Roisman, I.V.; Moreira, A.L.N.. "Heat transfer mechanisms at droplet/wall interactions: experiments and theory". Paper presented in 23rd Annual Conference on Liquid Atomization and Spray Systems - ILASS 2010, 2010.
    Published
  109. Moita, A.S.; Moreira, A.L.N.. "Scaling the effects of surface topography in the secondary atomization resulting from droplet/wall interactions". Paper presented in 15th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisboa, 2010.
    Published
  110. Moita, A.S.; Moreira, A.L.N.; Roisman, I.V.. "Heat transfer during drop impact onto a heated solid surface". Washington, 2010.
    Published • 10.1115/IHTC14-23202
  111. Moita, A.S.; Moreira, A.L.N.. "Evaluation of the cooling performance of individual droplets impinging onto heated targets". Paper presented in 11th Triennial International Conference on Liquid Atomization and Spray Systems – ICLASS 2009, Vail, 2009.
    Published
  112. Moita, A.S.; Morais, M.; Spena, A.; Moreira, A.L.N.. "Evaluation of the cooling performance of individual droplets impinging onto heated targets". 2009.
  113. Moita, A.S.; Moreira, A.L.N.. "Development of an empirical correlation to predict secondary atomization of impacting boiling droplets". Paper presented in 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisboa, 2008.
  114. Moita, A.S.; Moreira, A.L.N.. "Boiling morphology and heat removal of impinging coolant droplets". Paper presented in 22nd European Conference on Liquid Atomization and Spray Systems – ILASS 2008, Como, 2008.
    Published
  115. Moita, A.S.; Moreira, A.L.N.. "Thermal induced atomization and heat transfer in drop impacts against surface enhanced targets". Paper presented in 21th Annual Conference on Liquid Atomization and Spray Systems - ILASS 2007, Mugla, 2007.
    Published
  116. Moita, A.S.; Moreira, A.L.N.. "Characterization of hydrodynamics and heat-transfer processes of drop impacts against surface enhanced heated targets as an application to microelectromechanical cooling devices". Paper presented in International Conference on Multiphase Flow - ICMF 2007, Leipzig, 2007.
    Published
  117. Moreira, A.L.N.; Moita, A.S.; Cossali, G. E.; Marengo, M.; Santini, M.. "Secondary atomization of drop impactions onto heated inclined surfaces". Paper presented in 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisboa, 2006.
    Published
  118. Moita, A.S.; Moreira, A.L.. "Experimental characterization of disintegration of fuel droplets onto cold and heated surfaces". 2006.
    Published
  119. Moita, A.S.; Moreira, A.L.N.. "Experimental study on fuel drop impacts onto rigid surfaces: morphological comparisons, disintegration limits and secondary atomization". Paper presented in 31st International Symposium on Combustion, Heidelberg, 2006.
    Published
  120. Moita, A.S.; Moreira, A.L.N.. "Experimental characterization of droplet break-up from impacts onto hot metallic surfaces". Paper presented in 12th International Symposium on Flow Visualization – ISFV12, Göttingen, 2006.
    Published
  121. Moita, A.S.; Moreira, A.L.N.. "The interaction of Fuel Droplets with Heated Interposed Surfaces in IC Engines". Paper presented in 7th International Conference on Engines for Automobiles - ICE_SAE2005, Capri, 2005.
    Published
  122. Moita, A.S.; Moreira, A.L.N.. "The combined effects of surface topography and heat transfer on droplet/wall interaction mechanisms". Paper presented in 20th Annual Conference on Liquid Atomization and Spray Systems - ILASS 2005, Orleans, 2005.
    Published
  123. Moita, A.S.; Moreira, A.L.N.. "Efeito das propriedades da superfície nos mecanismos de desintegração de gotas incidentes: estudo fundamental para o impacto de gotas de combustível nas superfícies do cilindro". Paper presented in 4as Jornadas Politécnicas de Engenharia do Porto, 2004.
    Published
  124. Moita, A.S.; Moreira, A.L.N.. "Influência das propriedades da superfície no comportamento dinâmico de gotas de combustível incidentes nas paredes do cilindro". Paper presented in 3as Jornadas Politécnicas de Engenharia, Coimbra, 2003.
    Published
  125. Moita, A.S.; Moreira, A.L.N.. "Influence of surface properties on the dynamic behaviour of impacting droplets". Paper presented in 9th International Conference on Liquid Atomization and Spray Systems – ICLASS 2003, Sorrento, 2003.
    Published
  126. Moita, A. S.; Moreira, A.L.N.. "MOTORES DE INJECÇÃO DIRECTA: comportamento dinâmico das gotas de combustível ao incidirem nas superfícies do cilindro". Paper presented in 2as Jornadas Politécnicas de Engenharia, Setubal, 2002.
    Published
  127. Moita, A.S.; Moreira, A.L.N.. "The deformation of single droplets impacting onto a flat surface". Paper presented in SAE Powertrain & Fluid Systems Conference & Exhibition, San Diego, 2002.
    Published
  128. Moita, A.S.; Moreira, A.L.N.. "The dynamic behaviour of single droplets impacting onto a flat surface". Paper presented in 18th Annual Conference on Liquid Atomization and Spray Systems, Zaragoza – ILASS 2002, Zaragoza, 2002.
    Published
  129. Moita, A. S.; Moreira, A.L.N.. "Motores de injecção directa: estudo dos processos dinâmicos de deformação das gotas de combustível quando incidem na cabeça do pistão". Paper presented in 1as Jornadas Politécnicas de Engenharia de Leiria, 2001.
    Published
Conference poster
  1. Moita, A. S.; Freitas, E.; Pontes, P.; Cautela, R.; Ribeiro, A.P.C.; Bahadur, V.; Miranda, J.M.; et al. "ELECTROWetting heat pipes for cooling Applications in electric Vehicles". Paper presented in UT Austin Portugal Program's 2020 Annual Conference, 2020.
  2. Moita, A. S.; Caldeira, C.; Lima, R.; Vega, E.J.; Moreira, A.L.N.. "Development of analogue fluids for cell deformability studies in microfluidic devices". Paper presented in 16th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 4th Conference on Imaging and Visualization – CMBBE 2019, 2019.
  3. Abreu, V.; Harrison, M.; Gess, J.; Moita, A. S.. "Two-phase thermosiphon cooling using integrated heat spreaders with copper microstructures". Paper presented in The Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, IEEE ITherm 2018, 2018.
  4. Moita, A. S.; Moreira, A.L.N.. "Bioinspired multifunctional surfaces for Lab-on-chip applications". Paper presented in 3rd Edition Smart Materials and Surfaces - SMS Conference and Exhibition, 2017.
  5. Teodori, E.; Moita, A.S.; Moreira, A.L.N.. "Surface micro-structuring for advanced cooling systems". Paper presented in Ciência 2016: encontro com a Ciência e Tecnologia em Portugal, 2016.
  6. Teodori, E.; Malavasi, I.; Moita, A. S.; Marengo, M.; Moreira, A.L.N.. "Superhydrophobic surfaces: effects on the pool boiling process". Paper presented in E3 Forum – Education, Employment & Entrepreneurship, 2013.
  7. Teodori, E.; Silva, H.; Moita, A. S.; Moreira, A.L.N.. "Direct immersion in a dielectric boiling fluid as a solution for micro-electronics cooling". Paper presented in E3 Forum – Education, Employment & Entrepreneurship 2012, 2012.
  8. Teodori, E.; Silva, H.; Moita, A. S.; Moreira, A.L.N.. "Direct immersion in a dielectric boiling fluid as a solution for micro-electronics cooling". Paper presented in MIT Energy Night 2012, 2012.
Journal article
  1. G. Marseglia; M.G. De Giorgi; P. Pontes; R. Solipa; R.R. Souza; A.L.N. Moreira; A.S. Moita. "Enhancement of microchannel heat sink heat transfer: Comparison between different heat transfer enhancement strategies". Experimental Thermal and Fluid Science (2024): https://doi.org/10.1016/j.expthermflusci.2023.111052.
    10.1016/j.expthermflusci.2023.111052
  2. José Pereira; Reinaldo Souza; Ana Moita; António Moreira. "Nanofluids and Ionic Fluids as Liquid Electrodes: An Overview on Their Properties and Potential Applications". Processes (2023): https://doi.org/10.3390/pr11113189.
    10.3390/pr11113189
  3. Gonçalo Coutinho; Ana S. Moita; Massimiliano Rossi; António L. N. Moreira. "Experimental perspective on the mechanisms for near-wall accumulation of platelet-size particles in pressure-driven red blood cell suspension flows". Physical Review Fluids (2023): https://doi.org/10.1103/PhysRevFluids.8.103101.
    10.1103/PhysRevFluids.8.103101
  4. José Pereira; Ana Moita; António Moreira. "Noble Nanofluids and Their Hybrids for Heat Transfer Enrichment: A Review and Future Prospects Coverage". Applied Sciences (2023): https://doi.org/10.3390/app13179568.
    10.3390/app13179568
  5. José Pereira; Ana Moita; António Moreira. "Nanofluids as a Waste Heat Recovery Medium: A Critical Review and Guidelines for Future Research and Use". Processes (2023): https://doi.org/10.3390/pr11082443.
    10.3390/pr11082443
  6. José Pereira; Ana Moita; António Moreira. "An Overview of the Nano-Enhanced Phase Change Materials for Energy Harvesting and Conversion". Molecules (2023): https://doi.org/10.3390/molecules28155763.
    10.3390/molecules28155763
  7. R.R. Souza; F.M. Sá Barbosa; G. Nobrega; E.M. Cardoso; J.C.F. Teixeira; A.S. Moita; R. Lima. "An innovative PDMS cell to improve the thermal conductivity measurements of nanofluids". Thermal Science and Engineering Progress (2023): https://doi.org/10.1016/j.tsep.2023.101926.
    10.1016/j.tsep.2023.101926
  8. José Pereira; Ricardo Cautela; Ana Moita; António Moreira. "Effect of the Size of the Superhydrophobic Regions of Biphilic Surfaces on the Bubble Dynamics". Symmetry (2023): https://doi.org/10.3390/sym15040949.
    10.3390/sym15040949
  9. José Pereira; Ana Moita; António Moreira. "Fewer Dimensions for Higher Thermal Performance: A Review on 2D Nanofluids". Applied Sciences (2023): https://doi.org/10.3390/app13064070.
    10.3390/app13064070
  10. José Pereira; Ana Moita; António Moreira. "An Overview of the Molten Salt Nanofluids as Thermal Energy Storage Media". Energies (2023): https://doi.org/10.3390/en16041825.
    10.3390/en16041825
  11. Pontes, P.; Gonçalves, I.; Andredaki, M.; Georgoulas, A.; Moreira, A.L.N.; Moita, A.S.. "Fluid flow and heat transfer in microchannel devices for cooling applications: Experimental and numerical approaches". Applied Thermal Engineering 218 (2023): 119358. http://dx.doi.org/10.1016/j.applthermaleng.2022.119358.
    10.1016/j.applthermaleng.2022.119358
  12. Inês M. Gonçalves; Inês Castro; Filipe Barbosa; Vera Faustino; Susana O. Catarino; Ana Moita; João M. Miranda; et al. "Experimental Characterization of a Microfluidic Device Based on Passive Crossflow Filters for Blood Fractionation". Processes (2022): https://doi.org/10.3390/pr10122698.
    10.3390/pr10122698
  13. José Pereira; Ana Moita; António Moreira. "The Pool-Boiling-Induced Deposition of Nanoparticles as the Transient Game Changer—A Review". Nanomaterials (2022): https://doi.org/10.3390/nano12234270.
    10.3390/nano12234270
  14. Santos, R.; Ribeiro, A.P.C.; Moreira, A.L.N.; Moita, Ana Sofia Oliveira. "Effect of alumina nanofluids on bubble dynamics and heat transfer under quiescent conditions". International Journal of Thermofluids 15 (2022): 100168. http://dx.doi.org/10.1016/j.ijft.2022.100168.
    10.1016/j.ijft.2022.100168
  15. Souza, Reinaldo R.; Faustino, Vera; Gonçalves, Inês M.; Moita, Ana S.; Bañobre-López, Manuel; Lima, Rui. "A Review of the Advances and Challenges in Measuring the Thermal Conductivity of Nanofluids". Nanomaterials 12 15 (2022): 2526. http://dx.doi.org/10.3390/nano12152526.
    10.3390/nano12152526
  16. Eckl, Florentin; Eltrop, Ludger; Moita, Ana; Costa Neto, Rui. "Techno-economic evaluation of two hydrogen supply options to southern Germany: On-site production and import from Portugal". International Journal of Hydrogen Energy 47 60 (2022): 25214-25228. http://dx.doi.org/10.1016/j.ijhydene.2022.05.266.
    10.1016/j.ijhydene.2022.05.266
  17. Sousa, Carolina Clasen; Martins, Jorge; Carvalho, Óscar; Coelho, Miguel; Moita, Ana Sofia; Brito, Francisco P.. "Assessment of an Exhaust Thermoelectric Generator Incorporating Thermal Control Applied to a Heavy Duty Vehicle". Energies 15 13 (2022): 4787. http://dx.doi.org/10.3390/en15134787.
    10.3390/en15134787
  18. Gonçalves, Inês M.; Rodrigues, Raquel O.; Moita, Ana S.; Hori, Takeshi; Kaji, Hirokazu; Lima, Rui A.; Minas, Graça. "Recent trends of biomaterials and biosensors for organ-on-chip platforms". Bioprinting 26 (2022): e00202. http://dx.doi.org/10.1016/j.bprint.2022.e00202.
    10.1016/j.bprint.2022.e00202
  19. Marseglia, Guido; Sanches, M.; Ribeiro, A.P.C.; Moreira, A.L.N.; Moita, A.S.. "Thermofluid characterization of nanofluids in spray cooling". Applied Thermal Engineering 210 (2022): 118411. http://dx.doi.org/10.1016/j.applthermaleng.2022.118411.
    10.1016/j.applthermaleng.2022.118411
  20. Pereira, José E.; Moita, Ana S.; Moreira, António L.N.. "The pressing need for green nanofluids: A review". Journal of Environmental Chemical Engineering 10 3 (2022): 107940. http://dx.doi.org/10.1016/j.jece.2022.107940.
    10.1016/j.jece.2022.107940
  21. Ferrão, Inês A. S.; Mendes, Miguel A. A.; Moita, Ana S. O. H.; Silva, André R. R.. "The Addition of Particles to an Alternative Jet Fuel". Fuels 3 2 (2022): 184-206. http://dx.doi.org/10.3390/fuels3020012.
    10.3390/fuels3020012
  22. Moita, Ana Sofia; Pontes, Pedro; Martins, Lourenço; Coelho, Miguel; Carvalho, Oscar; Brito, F. P.; Moreira, António Luís N.. "Complex Fluid Flow in Microchannels and Heat Pipes with Enhanced Surfaces for Advanced Heat Conversion and Recovery Systems". Energies 15 4 (2022): 1478. http://dx.doi.org/10.3390/en15041478.
    10.3390/en15041478
  23. Gonçalves, Inês M.; Carvalho, Violeta; Rodrigues, Raquel O.; Pinho, Diana; Teixeira, Senhorinha F. C. F.; Moita, Ana; Hori, Takeshi; et al. "Organ-on-a-Chip Platforms for Drug Screening and Delivery in Tumor Cells: A Systematic Review". Cancers 14 4 (2022): 935. http://dx.doi.org/10.3390/cancers14040935.
    10.3390/cancers14040935
  24. Nobrega, Glauco; de Souza, Reinaldo Rodrigues; Gonçalves, Inês M.; Moita, Ana S.; Ribeiro, João E.; Lima, Rui A.. "Recent Developments on the Thermal Properties, Stability and Applications of Nanofluids in Machining, Solar Energy and Biomedicine". Applied Sciences 12 3 (2022): 1115. http://dx.doi.org/10.3390/app12031115.
    10.3390/app12031115
  25. Santos, Ricardo; Moita, Ana Sofia; Ribeiro, Ana Paula C.; Moreira, António Luís N.. "The Impact of Alumina Nanofluids on Pool Boiling Performance on Biphilic Surfaces for Cooling Applications". Energies 15 1 (2022): 372. http://dx.doi.org/10.3390/en15010372.
    10.3390/en15010372
  26. Souza, Reinaldo R.; Gonçalves, Inês M.; Rodrigues, Raquel O.; Minas, Graça; Miranda, J.M.; Moreira, António L.N.; Lima, Rui; et al. "Recent advances on the thermal properties and applications of nanofluids: From nanomedicine to renewable energies". Applied Thermal Engineering 201 (2022): 117725. http://dx.doi.org/10.1016/j.applthermaleng.2021.117725.
    10.1016/j.applthermaleng.2021.117725
  27. Souza, R.R.; Faustino, Vera; Oliveira, J.D.; Gonçalves, Inês M.; Miranda, João M.; Moita, Ana S.; Moreira, A.L.N.; et al. "A novel and extremely stable nanofluid based on iron oxide nanoparticles: Experimental investigations on the thermal performance". Thermal Science and Engineering Progress 26 (2021): 101085. http://dx.doi.org/10.1016/j.tsep.2021.101085.
    10.1016/j.tsep.2021.101085
  28. Pontes, Pedro; Martins, Lourenço; Gonçalves, Iva; Moita, Ana S; Moreira, António LN. "Thermographical study of geometry and phase change influence on PDMS Microchannel liquid cooling devices". Journal of Physics: Conference Series 2116 1 (2021): 012050. http://dx.doi.org/10.1088/1742-6596/2116/1/012050.
    10.1088/1742-6596/2116/1/012050
  29. Pontes, P; Freitas, E; Fernandes, D; Teixeira, A; Ferreira, R; Bellmann, S; Cautela, R; et al. "Pool boiling of nanofluids on biphilic surfaces". Journal of Physics: Conference Series 2116 1 (2021): 012006. http://dx.doi.org/10.1088/1742-6596/2116/1/012006.
    10.1088/1742-6596/2116/1/012006
  30. Cruz, Gonçalo G.; Mendes, Miguel A.A.; Pereira, Jos M.C.; Santos, H.; Nikulin, A.; Moita, Ana S.. "Experimental and numerical characterization of single-phase pressure drop and heat transfer enhancement in helical corrugated tubes". International Journal of Heat and Mass Transfer 179 (2021): 121632. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2021.121632.
    Published • 10.1016/j.ijheatmasstransfer.2021.121632
  31. Lamosa, Rita Adrião; Motovoy, Igor; Khliiev, Nikita; Nikulin, Artem; Khliyeva, Olga; Moita, Ana S.; Krupanek, Janusz; et al. "Tetralin + fullerene C60 solutions for thermal management of flat-plate photovoltaic/thermal collector". Energy Conversion and Management 248 (2021): 114799. http://dx.doi.org/10.1016/j.enconman.2021.114799.
    10.1016/j.enconman.2021.114799
  32. S. Ferrão, Inês A.; Silva, André R.R.; Moita, Ana. S.O.H.; Mendes, Miguel A.A.; Costa, Mário M.G.. "Combustion characteristics of a single droplet of hydroprocessed vegetable oil blended with aluminum nanoparticles in a drop tube furnace". Fuel 302 (2021): 121160. http://dx.doi.org/10.1016/j.fuel.2021.121160.
    Published • 10.1016/j.fuel.2021.121160
  33. Moita, Ana; Moreira, António; Pereira, José. "Nanofluids for the Next Generation Thermal Management of Electronics: A Review". Symmetry 13 8 (2021): 1362. http://dx.doi.org/10.3390/sym13081362.
    10.3390/sym13081362
  34. Manetti, Leonardo Lachi; Moita, Ana Sofia Oliveira Henriques; Cardoso, Elaine Maria. "A new pool boiling heat transfer correlation for wetting dielectric fluids on metal foams". International Journal of Heat and Mass Transfer 171 (2021): 121070. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2021.121070.
    10.1016/j.ijheatmasstransfer.2021.121070
  35. Violeta Carvalho; Inês Gonçalves; Teresa Lage; Raquel O. Rodrigues; Graça Minas; Senhorinha F. C. F. Teixeira; Ana S. Moita; et al. "3D Printing Techniques and Their Applications to Organ-on-a-Chip Platforms: A Systematic Review". Sensors 21 9 (2021): 3304-3304. https://doi.org/10.3390/s21093304.
    10.3390/s21093304
  36. Miguel Sanches; Guido Marseglia; Ana P. C. Ribeiro; António L. N. Moreira; Ana S. Moita. "Nanofluids Characterization for Spray Cooling Applications". Symmetry (2021): https://doi.org/10.3390/sym13050788.
    10.3390/sym13050788
  37. Inês Maia Gonçalves; Miguel Madureira; Inês Miranda; Helmut Schütte; Ana Moita; Graça Minas; Stefan Gassmann; Rui Lima. "Separation Microfluidic Device Fabricated by Micromilling Techniques". Engineering Proceedings (2021): https://doi.org/10.3390/Micromachines2021-09599.
    10.3390/Micromachines2021-09599
  38. Reinaldo Rodrigues de Souza; Vera Faustino; Inês Maia Gonçalves; João Mário Miranda; Ana Sofia Moita; Antônio L. N. Moreira; Manuel Bañobre-López; Rui Lima. "Experimental Studies of the Sedimentation, Stability and Thermal Conductivity of Two Different Nanofluids". Engineering Proceedings (2021): https://doi.org/10.3390/Micromachines2021-09589.
    10.3390/Micromachines2021-09589
  39. Inês Gonçalves; Reinaldo Souza; Gonçalo Coutinho; João Miranda; Ana Moita; José Eduardo Pereira; António Moreira; Rui Lima. "Thermal Conductivity of Nanofluids: A Review on Prediction Models, Controversies and Challenges". Applied Sciences 11 6 (2021): 2525-2525. https://doi.org/10.3390/app11062525.
    10.3390/app11062525
  40. Gonçalves, Inês M.; Rocha, César; Souza, Reinaldo R.; Coutinho, Gonçalo; Pereira, Jose E.; Moita, Ana S.; Moreira, António L. N.; Lima, Rui; Miranda, João M.. "Numerical Optimization of a Microchannel Geometry for Nanofluid Flow and Heat Dissipation Assessment". Applied Sciences 11 5 (2021): 2440. http://dx.doi.org/10.3390/app11052440.
    10.3390/app11052440
  41. Freitas, Eduardo; Pontes, Pedro; Cautela, Ricardo; Bahadur, Vaibhav; Miranda, João; Ribeiro, Ana P. C.; Souza, Reinaldo R.; et al. "Pool Boiling of Nanofluids on Biphilic Surfaces: An Experimental and Numerical Study". Nanomaterials 11 1 (2021): 125. http://dx.doi.org/10.3390/nano11010125.
    10.3390/nano11010125
  42. Moita, A. S.. "Thermofluid Characterization of Nanofluid Spray Cooling Combining Phase Doppler Interferometry with High-Speed Visualization and Time-Resolved IR Thermography". Energies 13 22 (2020): 5864-5864. http://dx.doi.org/10.3390/en13225864.
    10.3390/en13225864
  43. Pedro Pontes; Qiu J. Liang; Fabrício M. Matos; Ana S. Moita; Ana P. C. Ribeiro; António L. N. Moreira; Pontes, P.; et al. "Heat transfer and fluid dynamics of nanofluid droplets impacting on a smooth heated surface: detailing temporal scale effects by using time-resolved thermography". Heat Transfer Engineering (2020): https://doi.org/10.1080/01457632.2020.1818418.
    Accepted • 10.1080/01457632.2020.1818418
  44. Panão, Miguel O.; Moita, Ana S.; Moreira, António L.. "On the Statistical Characterization of Sprays". Applied Sciences 10 17 (2020): 6122. http://dx.doi.org/10.3390/app10176122.
    10.3390/app10176122
  45. Pontes, P.; Cautela, R.; Teodori, E.; Moita, A.S.; Moreira, A.L.N.. "Experimental description of bubble dynamics and heat transfer processes occurring on the pool boiling of water on biphilic surfaces". Applied Thermal Engineering 178 (2020): 115507. http://dx.doi.org/10.1016/j.applthermaleng.2020.115507.
    10.1016/j.applthermaleng.2020.115507
  46. Pontes, Pedro; Cautela, Ricardo; Teodori, Emanuele; Moita, Ana Sofia; Georgoulas, Anastasios; Moreira, António Luís Nobre Moreira. "Bubble Dynamics and Heat Transfer on Biphilic Surfaces: Experiments and Numerical Simulation". Journal of Bionic Engineering 17 4 (2020): 809-821. http://dx.doi.org/10.1007/s42235-020-0064-x.
    10.1007/s42235-020-0064-x
  47. Manetti, Leonardo Lachi; Moita, A. S.; de Souza, Reinaldo Rodrigues; Cardoso, Elaine Maria. "Effect of copper foam thickness on pool boiling heat transfer of HFE-7100". International Journal of Heat and Mass Transfer 152 (2020): 119547. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2020.119547.
    Published • 10.1016/j.ijheatmasstransfer.2020.119547
  48. Li, Xinlin; Wang, Guoyong; Moita, Ana Sofia; Zhang, Chengchun; Wang, Shunhao; Liu, Yan. "Fabrication of bio-inspired non-fluorinated superhydrophobic surfaces with anti-icing property and its wettability transformation analysis". Applied Surface Science 505 (2020): 144386. http://dx.doi.org/10.1016/j.apsusc.2019.144386.
    10.1016/j.apsusc.2019.144386
  49. Pontes, Pedro; Cautela, Ricardo; Teodori, Emanuele; Moita, A. S.; Liu, Yan; Moreira, A.L.N.; Nikulin, Artem; del Barrio, Elena Palomo. "Effect of pattern geometry on bubble dynamics and heat transfer on Biphilic Surfaces". Experimental Thermal and Fluid Science 115 (2020): 110088. http://dx.doi.org/10.1016/j.expthermflusci.2020.110088.
    Published • 10.1016/j.expthermflusci.2020.110088
  50. Harrison, M.; Moita, Ana; Gess, J.. "Characterization of net coolant flow rate to copper boiling surfaces using two-phase particle image Velocimetry and dielectric fluid". Heat and Mass Transfer (2020): http://dx.doi.org/10.1007/s00231-020-02812-1.
    Published • 10.1007/s00231-020-02812-1
  51. Lima, R.; Vega, E.J.; Moita, A.S.; Miranda, J.M.; Pinho, D.; Moreira, A.L.N.. "Fast, flexible and low-cost multiphase blood analogue for biomedical and energy applications". Experiments in Fluids 61 11 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85092386264&partnerID=MN8TOARS.
    10.1007/s00348-020-03066-7
  52. Andrade, F.; Moita, A.S.; Nikulin, A.; Moreira, A.L.N.; Santos, H.. "Experimental investigation on heat transfer and pressure drop of internal flow in corrugated tubes". International Journal of Heat and Mass Transfer 140 (2019): 940-955. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2019.06.025.
    Published • 10.1016/j.ijheatmasstransfer.2019.06.025
  53. Nikulin, A.; Moita, A.S.; Moreira, A.L.N.; Murshed, S.M.S.; Huminic, A.; Grosu, Y.; Faik, A.; Nieto-Maestre, J.; Khliyeva, O.. "Effect of Al2O3 nanoparticles on laminar, transient and turbulent flow of isopropyl alcohol". International Journal of Heat and Mass Transfer 130 (2019): 1032-1044. http://www.scopus.com/inward/record.url?eid=2-s2.0-85056217431&partnerID=MN8TOARS.
    Published • 10.1016/j.ijheatmasstransfer.2018.10.114
  54. Moita, Ana; Jacinto, F.; Mata, F.; Moreira, A.L.N.. "Design and optimization of an open configuration microfluidic device for clinical diagnostics". Communications in Computer and Information Science (2019):
    Published
  55. M. Malý; A. S. Moita; J. Jedelsky; A. P. C. Ribeiro; A. L. N. Moreira. "Effect of nanoparticles concentration on the characteristics of nanofluid sprays for cooling applications". Journal of Thermal Analysis and Calorimetry (2018): https://doi.org/10.1007/s10973-018-7444-z.
    Published • 10.1007/s10973-018-7444-z
  56. Shen, C.; Zhang, C.; Gao, M.; Li, X.; Liu, Y.; Ren, L.; Moita, A.S.. "Investigation of effects of receding contact angle and energy conversion on numerical prediction of receding of the droplet impact onto hydrophilic and superhydrophilic surfaces". International Journal of Heat and Fluid Flow 74 (2018): 89-109. http://www.scopus.com/inward/record.url?eid=2-s2.0-85054187071&partnerID=MN8TOARS.
    Published • 10.1016/j.ijheatfluidflow.2018.09.015
  57. Teodori, E.; Pontes, P.; Moita, A.S.; Moreira, A.L.N.. "Thermographic analysis of interfacial heat transfer mechanisms on droplet/wall interactions with high temporal and spatial resolution". Experimental Thermal and Fluid Science 96 (2018): 284-294. http://www.scopus.com/inward/record.url?eid=2-s2.0-85044100309&partnerID=MN8TOARS.
    Published • 10.1016/j.expthermflusci.2018.03.013
  58. Moita, A.S.; Herrmann, D.; Moreira, A.L.N.. "Fluid dynamic and heat transfer processes between solid surfaces and non-Newtonian liquid droplets". Applied Thermal Engineering 88 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-84919482302&partnerID=MN8TOARS.
    Published • 10.1016/j.applthermaleng.2014.11.042
  59. Teodori, E.; Pontes, P.; Moita, A.; Georgoulas, A.; Marengo, M.; Moreira, A.. "Sensible heat transfer during droplet cooling: Experimental and numerical analysis". Energies 10 6 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85021872453&partnerID=MN8TOARS.
    Published • 10.3390/en10060790
  60. Teodori, E.; Moita, A.S.; Moura, M.; Pontes, P.; Moreira, A.; Bai, Y.; Li, X.; Liu, Y.; Moreira, A.L.N.. "Application of Bioinspired Superhydrophobic Surfaces in Two-phase Heat Transfer Experiments". Journal of Bionic Engineering 14 3 (2017): 506-519. http://www.scopus.com/inward/record.url?eid=2-s2.0-85023635703&partnerID=MN8TOARS.
    Published • 10.1016/S1672-6529(16)60417-1
  61. Teodori, E.; Valente, T.; Malavasi, I.; Moita, A.S.; Marengo, M.; Moreira, A.L.N.. "Effect of extreme wetting scenarios on pool boiling conditions". Applied Thermal Engineering 115 (2017): 1424-1437. http://www.scopus.com/inward/record.url?eid=2-s2.0-85006721147&partnerID=MN8TOARS.
    Published • 10.1016/j.applthermaleng.2016.11.079
  62. Liu, Y.; Yao, W.; Wang, G.; Wang, Y.; Moita, A.S.; Han, Z.; Ren, L.. "Reversibly switchable wettability on aluminum alloy substrate corresponding to different pH droplet and its corrosion resistance". Chemical Engineering Journal 303 (2016): 565-574. http://www.scopus.com/inward/record.url?eid=2-s2.0-84974829137&partnerID=MN8TOARS.
    Published • 10.1016/j.cej.2016.06.038
  63. Moita, A.S.; Laurência, C.; Ramos, J.A.; Prazeres, D.M.F.; Moreira, A.L.N.. "Dynamics of Droplets of Biological Fluids on Smooth Superhydrophobic Surfaces under Electrostatic Actuation". Journal of Bionic Engineering 13 2 (2016): 220-234. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962881199&partnerID=MN8TOARS.
    Published • 10.1016/S1672-6529(16)60296-2
  64. Emanuele Teodori; Ana Moita; Antonio Moreira. "Empirical and modelling based correlations for pool boiling over micro-structured surfaces". Interfac Phenom Heat Transfer (2015): http://dx.doi.org/10.1615/interfacphenomheattransfer.2015011663.
    Published
  65. Moita, A.S.; Teodori, E.; Moreira, A.L.N.. "Influence of surface topography in the boiling mechanisms". International Journal of Heat and Fluid Flow 52 (2015): 50-63. http://www.scopus.com/inward/record.url?eid=2-s2.0-84913528873&partnerID=MN8TOARS.
    Published • 10.1016/j.ijheatfluidflow.2014.11.003
  66. Pereira, P.M.M.; Moita, A.S.; Monteiro, G.A.; Prazeres, D.M.F.. "Characterization of the topography and wettability of english weed leaves and biomimetic replicas". Journal of Bionic Engineering 11 3 (2014): 346-359. http://www.scopus.com/inward/record.url?eid=2-s2.0-84904035178&partnerID=MN8TOARS.
    Published • 10.1016/S1672-6529(14)60048-2
  67. Moita, Ana. "Empirical and modeling based correlations for pool boiling over micro-structured surfaces". Journal of Interfacial Phenomena and Heat Transfer 2 3-4 (2014):
    Published • 10.1615/InterfacPhenomHeatTransfer.2015011663
  68. Teodori, E.; Moita, A.S.; Moreira, A.L.N.. "Characterization of pool boiling mechanisms over micro-patterned surfaces using PIV". International Journal of Heat and Mass Transfer 66 (2013): 261-270. http://www.scopus.com/inward/record.url?eid=2-s2.0-84881287896&partnerID=MN8TOARS.
    Published • 10.1016/j.ijheatmasstransfer.2013.07.033
  69. Moita, A.S.; Moreira, A.L.N.. "Scaling the effects of surface topography in the secondary atomization resulting from droplet/wall interactions". Experiments in Fluids 52 3 (2012): 679-695. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861698072&partnerID=MN8TOARS.
    Published • 10.1007/s00348-011-1106-2
  70. Moreira, A.L.N.; Moita, A.S.; Panão, M.R.. "Advances and challenges in explaining fuel spray impingement: How much of single droplet impact research is useful?". Progress in Energy and Combustion Science 36 5 (2010): 554-580. http://www.scopus.com/inward/record.url?eid=2-s2.0-77956612922&partnerID=MN8TOARS.
    Published • 10.1016/j.pecs.2010.01.002
  71. Moita, A.S.; Moreira, A.L.N.. "Development of empirical correlations to predict the secondary droplet size of impacting droplets onto heated surfaces". Experiments in Fluids 47 4-5 (2009): 755-768. http://www.scopus.com/inward/record.url?eid=2-s2.0-70350185445&partnerID=MN8TOARS.
    Published • 10.1007/s00348-009-0719-1
  72. Moita, A.S.; Moreira, A.L.. "Experimental study on fuel drop impacts onto rigid surfaces: Morphological comparisons, disintegration limits and secondary atomization". Proceedings of the Combustion Institute 31 II (2007): 2175-2183. http://www.scopus.com/inward/record.url?eid=2-s2.0-34548093124&partnerID=MN8TOARS.
    Published • 10.1016/j.proci.2006.07.150
  73. Moreira, A.L.N.; Moita, A.S.; Cossali, E.; Marengo, M.; Santini, M.. "Secondary atomization of water and isooctane drops impinging on tilted heated surfaces". Experiments in Fluids 43 2-3 (2007): 297-313. http://www.scopus.com/inward/record.url?eid=2-s2.0-34548098701&partnerID=MN8TOARS.
    Published • 10.1007/s00348-007-0330-2
  74. Moita, A.S.; Moreira, A.L.N.. "Drop impacts onto cold and heated rigid surfaces: Morphological comparisons, disintegration limits and secondary atomization". International Journal of Heat and Fluid Flow 28 4 (2007): 735-752. http://www.scopus.com/inward/record.url?eid=2-s2.0-34447302310&partnerID=MN8TOARS.
    Published • 10.1016/j.ijheatfluidflow.2006.10.004
  75. Moita, A.S.; Moreira, A.L.. "The Interaction of Fuel Droplets with Heated Interposed Surfaces in IC Engines". SAE Technical Papers 2005-Septe (2005): http://www.scopus.com/inward/record.url?eid=2-s2.0-84874669679&partnerID=MN8TOARS.
    Published • 10.4271/2005-24-084
  76. Moita, A.S.; Moreira, A.L.N.. "The deformation of single droplets impacting onto a flat surface". SAE Technical Papers (2002): http://www.scopus.com/inward/record.url?eid=2-s2.0-84877560766&partnerID=MN8TOARS.
    Published • 10.4271/2002-01-2749
Journal issue
  1. Moita, Ana; Lydia Achelis; Raffaele Ragucci. ""Special Issue: ILASS Europe Conference 2023"". Atomization and Sprays, Begell House (2024):
    In press • Coeditor
  2. Moita, Ana; Rui Lima; de Souza, Reinaldo Rodrigues; Costa, João Ribeiro da. "Aerospace | Special Issue : Heat Transfer and Cooling Systems for Aerospace Equipment". Aerospace (2024): https://www.mdpi.com/journal/aerospace/special_issues/VIH3SH5T14.
    Under revision • Coeditor
  3. Moita, Ana. "Liquid-solid interfacial phenomena on complex surfaces". Symmetry (2021): https://www.mdpi.com/journal/symmetry/special_issues/Liquid_Solid_Interfacial_Phenomena_Complex_Surfaces.
    Submitted • Invited editor
  4. Moita, Ana. "Multi-scale Waste Heat Recovery Systems for High-Power Heat Dissipation Applications". Energies (2021): https://www.mdpi.com/journal/energies/special_issues/waste_recovery_heat_systems_vehicles.
    Published • Invited editor
  5. Moita, A. S.. "Progress in liquid atomization and spray systems". applied sciences (2021): https://www.mdpi.com/journal/applsci/special_issues/LA_Spray.
    In press • Invited editor
Newspaper article
  1. Moita, A. S.. "A ciência das gotas e a sua importância em época de pandemia", Jornal i, 2020, https://ionline.sapo.pt/artigo/702896/a-ci-ncia-das-gotas-e-a-sua-import-ncia-em-epoca-de-pandemia.
Test
  1. Moita, A. S.. 2021. 2º Teste de Mecânica dos Fluidos II (Licenciatura e Mestrado integrado em Engenharia Mecânica Militar - Academia Militar - Instituto Universitário Militar).
  2. Moita, A. S.. 2021. 2º Teste de Termodinâmica I (Licenciatura e Mestrado integrado em Engenharia Mecânica Militar - Academia Militar - Instituto Universitário Militar).
  3. Moita, A. S.. 2021. 1º Teste de Mecânica dos Fluidos II (Licenciatura e Mestrado integrado em Engenharia Mecânica Militar - Academia Militar - Instituto Universitário Militar).
  4. Moita, A. S.. 2021. 1º Teste de Termodinâmica I (Licenciatura e Mestrado integrado em Engeharia Mecânica Militar - Academia Militar - Instituto Universitário Militar).
  5. Moita, A. S.. 2021. 2º Teste de Mecânica dos Fluidos I (Licenciatura e Mestrado integrado em Engenharia Mecânica Militar - Academia Militar - Instituto Universitário Militar).
  6. Moita, A. S.. 2021. 2º Teste de Termodinâmica II (Licenciatura e Mestrado integrado em Engenharia Mecânica Militar - Academia Militar - Instituto Universitário Militar).
  7. Moita, A. S.. 2020. 1º Teste de Termodinâmica II (Licenciatura e Mestrado integrado em Engenharia Mecânica Militar - Academia Militar - Instituto Universitário Militar).
  8. Moita, A. S.. 2020. 1º Teste de Mecânica dos Fluidos I (Licenciatura e Mestrado integrado em Engenharia Mecânica Militar - Academia Militar - Instituto Universitário Militar).
  9. Moita, A. S.. 2020. 2º Teste de Mecânica dos Fluidos II (Licenciatura e Mestrado integrado em Engenharia Mecânica Militar - Academia Militar - Instituto Universitário Militar).
  10. Moita, A. S.. 2020. 2º Teste de Termodinâmica I (Licenciatura e Mestrado integrado em Engenharia Mecânica Militar - Academia Militar - Instituto Universitário Militar).
  11. Moita, A. S.. 2020. 1º Teste de Mecânica dos Fluidos II (Licenciatura e Mestrado integrado em Engenharia Mecânica Militar - Academia Militar - Instituto Universitário Militar).
  12. Moita, A. S.. 2020. 1º Teste de Termodinâmica I (Licenciatura e Mestrado integrado em Engenharia Mecânica Militar - Academia Militar - Instituto Universitário Militar).
  13. Moita, Ana; Santos, Aires; Pita, Gabriel; Fernandes, Edgar C.. 2016. 1º Exame de Termodinâmica I - Repescagem (Licenciatura e Mestrado Integrado Eng. Ambiente, Licenciatura Eng. Naval e Oceânica, Mestrado Integrado Eng. Aeroespacial, Mestrado Integrado Eng. Mecânica, Instituto Superior Técnico, Universidade de Lisboa).
  14. Moita, Ana; Fernandes, Edgar C.. 2016. 1º Teste Termodinâmica I (Licenciatura e Mestrado Integrado Eng. Ambiente, Licenciatura Eng. Naval e Oceânica, Mestrado Integrado Eng. Aeroespacial, Mestrado Integrado Eng. Mecânica, Instituto Superior Técnico, Universidade de Lisboa).
  15. Moita, Ana; Moreira, A.L.N.; Santos, Aires; Pita, Gabriel. 2014. 1º Exame Termodinâmica I (Licenciatura e Mestrado Integrado Eng. Ambiente, Licenciatura Eng. Naval e Oceânica, Mestrado Integrado Eng. Aeroespacial, Mestrado Integrado Eng. Mecânica, Instituto Superior Técnico, Universidade de Lisboa).
  16. Moita, Ana; Fernandes, Edgar C.. 2013. 2º Teste Termodinâmica I (Licenciatura e Mestrado Integrado Eng. Ambiente, Licenciatura Eng. Naval e Oceânica, Mestrado Integrado Eng. Aeroespacial, Mestrado Integrado Eng. Mecânica, Instituto Superior Técnico, Universidade de Lisboa).
  17. Moita, Ana; Moreira, A.L.N.. 2012. Exame de Época Especial Transferência de Energia e Massa (Mestrado Integrado Eng. Ambiente, Instituto Superior Técnico, Universidade de Lisboa).
  18. Moita, Ana; Moreira, A.L.N.. 2012. 2º Exame Transferência de Energia e Massa (Mestrado Integrado Eng. Ambiente, Instituto Superior Técnico, Universidade de Lisboa).
  19. Moita, Ana; Moreira, A.L.N.. 2012. 1º Exame Transferência de Energia e Massa (Mestrado Integrado Eng. Ambiente, Instituto Superior Técnico, Universidade de Lisboa).
  20. Moita, Ana; Moreira, A.L.N.. 2012. 2º Teste Transferência de Energia e Massa (Mestrado Integrado Eng. Ambiente, Instituto Superior Técnico, Universidade de Lisboa).
  21. Moita, Ana; Moreira, A.L.N.. 2012. 1º Teste Transferência de Energia e Massa (Mestrado Integrado Eng Ambiente, Instituto Superior Técnico, Universidade de Lisboa).
Thesis / Dissertation
  1. Moita, Ana. "Thermal and fluid dynamics of droplet wall interactions". PhD, Universidade de Lisboa Instituto Superior Técnico, 2009.
  2. Moita, Ana. "Dynamic behaviour of droplets impacting onto flat surfaces". Master, Universidade de Lisboa Instituto Superior Técnico, 2004.
  3. Moita, Ana. "Uma instalação experimental para estudar o comportamento dinâmico de gotas incidentes em superfícies". Degree, Universidade de Lisboa Instituto Superior Técnico, 2001.

Intellectual property

Patent
  1. RUI ALBERTO MADEIRA MACEDO DE LIMA; Souza, Reinaldo R.; Moita, Ana; Bañobre-López, Manuel; António L. N. Moreira; GRAÇA MARIA HENRIQUES MINAS; SUSANA OLIVEIRA CATARINO; et al. 2024. "Elastomer composite serpentine for a heat exchanger, method for obtaining and uses therof.". Portugal.
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2023/10/27 Microfluidic heat sink for thermal management of electronic components in unmanned military vehicles 5º Encontro de I&D em Ciências Militares
Instituto Universitário Militar (Lisboa, Portugal)
2023/10/14 Bioinspired ennahnced surfaces to improve phase change cooling systems for industry and military applications 7th International Conference of Bionic Engineering (ICBE 2023)
ISBE - International Society of Bionic Engineering (Wuhan)
2023/09/19 Evaluation of the use of nanofluids in a microchannel based cooler to be integrated in a PV panel 8th International Conference on Micro and Nanoflows (MNF 2023)
University of Padova (Padova)
2023/09/18 Micro(Cooling) Systems for industrial applications 8th International Conference on Micro and Nanoflows (MNF 2023)
(Padova, Portugal)
2023/09/08 Micro(Cooling) Systems for industrial applications Invited seminar
University of Lecce (Lecce)
2023/06/11 Clean (micro)conversion energy systems as a road to minimize climate change impact 49th International Conference on Applications of Mathematics in Engineering and Economics
TU Sofia (Sofia)
2022/02/10 Separation microfluidic devices fabricated by different milling processes BIODEVICES 2022: 15th International Conference on Biomedical Electronics and Devices
INSTICC (Online event)
2022/02/09 ABORDAGEM MULTIESCALAR PARA O DESENVOLVIMENTO DE (MICRO) SISTEMAS DE ARREFECIMENTO PARA APLICAÇÕES INDUSTRIAIS Seminários convidados do Departamento de Engenharia Mecânica do Instituto Superior Técnico: SEMINARS@DEM
Departamento de Engenharia Mecânica do Instituto Superior Técnico (Lisboa)
2021/11/23 Micro-to-Macro approach of multiphase flows: pool and flowboiling based systems for industrial and defense applications 26th International Conference on Mechanical Engineering, COBEM 2021
ABCM (Online event, Brazil)
2021/10/10 Complex fluid flows in mini and microchannels with micro and nano enhanced surfaces for advanced heat recovery systems 16th Conference on Sustainable Development of Energy, Water and Environment Systems, 16th SEWDES 2021
(Dubrovnic)
2021/09/21 Pool boiling of nanofluids on biphilic surfaces. EUROTHERM 2021 - 8th European Thermal Sciences Conference
(Online event)
2021/09/16 Energy Conversion Cooling/Heating (Micro)Systems for Civil and Military Applications 4th Energies Webinar: Advanced Research in Two-Phase Heat Transfer - MDPI
Online event
2021/09/10 Nanofluid spray cooling for industrial applications 3rd European Symposium on Nanofluids – ESNF 2021. 9-10 September 2021
(Online Event)
2021/09/01 Heat transfer in nanofluid spray cooling of a solid heated surface for cooling systems in civil and military applications ICLASS Ediburgh 2021
(Online Event)
2021/02/12 Dynamic flow behaviour of a blood analogue fluid in microchannels for microcirculation studies 14th International Joint Conference on Biomedical Engineering Systems and Technologies (BIOSTEC 2021)
Online streaming
2020/09/09 Fluid dynamics and heat transfer of nanofluid engineered sprays impacting onto complex surfaces Online Annual ILASS 2020 Webinar
Online streaming
2019/09/24 Micro-and-nanometric engineered bioinspired interfaces for heat transfer enhancement 6th Internacional Conference of Bionic Engineering – ICBE 2019 and International Symposium on Nature-Inspired Technology - ISNIT2019
ISBE - International Society of Bionic Engineering (Changchun, China)
2019/09/24 Development and test of biphilic surfaces with biomimetic patterns for heat transfer enhancement 6th International Conference of Bionic Engineering – ICBE 2019
(Changchun, China)
2019/09/09 Bubble dynamics and heat transfer on biphilic surfaces 16th UK Heat Transfer Conference
(Nottingham, United Kingdom)
2019/09/02 Time resolved thermographic characterization of heat transfer and fluid dynamics in nanofluid droplets for cooling applications 29th European Conference on Liquid Atomization and Spray Systems ILASS 2019 Paris
(Paris, France)
2019/06/27 Time and spatially resolved fluid dynamics and heat transfer characterization of nanofluid droplets impacting on heated surfaces 1st International Conference on Nanofluids (ICNf) and the 2nd European Symposium on Nanofluids (ESNf)
(Castelló, Spain)
2019/06/06 Surface Wettability Effects on Phase Change Phenomena SWEP Workshop 2019 – Surface Wettability Effects on Phase Change Phenomena
University of Mons (Mons, Belgium)
2019/01/23 Cell deformability studies for clinical diagnostics: tests with blood analogue fluids using a drop based microfluidic device 12th International Conference on Biomedical Electronics and Devices
(Praga, Czech Republic)
2018/11/09 Renewing the approach to renewals: microfluidic solutions to enhance the energy conversion in solar panels Seminario no âmbito da disciplina de Sustainable Energy Systems do Programa Doutoral de Sistemas Sustentáveis em Energia, Instituto Superior Técnico, Universidade de Lisboa
Instituto Superior Técnico, Universidade de Lisboa
2018/08/18 Nanofluid sprays for cooling applications DIPSI 2018 – Droplet Impact Phenomena & Spray Investigations Workshop
Bergamo University (Bergamo, Italy)
2018/07/22 Droplet dynamics under electrostatic actuation for clinical diagnostics ICLASS 2018, 14th Triennial International Conference on Liquid Atomization and Spray Systems
ILASS - Institute for Liquid Atomization and Spray Systems (Chicago, United States)
2018/07/16 Effect of nanoparticles concentration in the characteristics of nanofluid sprays for cooling applications 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics
(Lisboa, Portugal)
2018/03 Effect of biofluids rheology and wettability on droplet dynamics in lab-on-chip systems for cancer diagnostics 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 3rd Conference on Imaging and Visualization
(Lisboa, Portugal)
2018/01 Design, test and fabrication of a droplet based microfluidic device for clinical diagnostics 11th International Conference on Biomedical Electronics and Devices – Volume 1: BIODEVICES 2018
INSTICC - Institute for Systems and Technologies of Information, Control and Communication (Madeira - Funchal, Portugal)
2017/10 Nanoengineered wettability for heat transfer enhancement in spray cooling 1st European Symposium on Nanofluids – ESNf2017
(Lisboa, Portugal)
2017/06 Thermographic analysis of interfacial heat transfer mechanisms with high temporal resolution 9th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, ExHFT-9
(Cataratas do Iguaçu, Brazil)
2017/02 Microfluidic prototype of a Lab-on-Chip device for lung cancer diagnostics 10th International Joint Conference on Biomedical Engineering Systems and Technologies: BIODEVICES
ISNTICC - Institute for Systems and Technologies of Information, Control and Communication (Porto, Portugal)
2017/01 Fluid dynamics of biodroplets under electrostatic actuation Proc. of the 7th Portuguese Congress on Biomechanics (CNB2017)
Sociedade Portuguesa de Biomecânica (Guimarães, Portugal)
2016/09/09 Transport phenomena at liquid-solid interfaces using enhanced surfaces Invited lecture at the Division of Engineering and Product Design, School of Computing, Engineering and Mathematics (CEM), University of Brighton
University of Brighton (Brighton, United Kingdom)
2016/09 Effect of surface wettability on the spreading and displacement of biofluid drops in electrowetting ILASS – Europe 2016, 27th Annual Conference on Liquid Atomization and Spray Systems
ILASS - Institute for Liquid Atomization and Liquid Systems (Brighton, United Kingdom)
2016/06/23 Characterization of bioflows as a clinical diagnostic tool 5th International Conference of Bionic Engineering - ICBE2016
ISBE - International Society of Bionic Engineering (Ningbo, China)
2016/06 Application of bioinspired superhydrophobic surfaces in two-phase heat transfer experiments 5th International Conference of Bionic Engineering – ICBE 2016
ISBE - International Society of Bionic Engineering (Ningbo, China)
2016/05/10 Thermal and Fluid Dynamics of Droplet-Wall Interactions based on a Multiscale Approach EMN Meeting on Droplets 2016: Energy Materials Nanotechnology
(San Sebastian, Spain)
2016/05 2 Phase Microprocessor Cooling System with Controlled Pool Boiling of Dielectrics over Micro-and-Nano Structured Integrated Heat Spreaders IEEE ITherm Conference, The Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems
IEEE (Las Vegas, United States)
2015/08/13 Tailoring surface properties for the design of thermofluidic devices 5th BioApproNFS-Wett Workshop, in the 2015 International Bionic Engineering, Refrigeration, and Heat Transfer Workshop
Dalian Maritime University (Dalian, China)
2015/06/05 Importance of surface properties in the transport of biofluid droplets by electrowetting 4th BioApproNFS-Wett Workshop
Instituto Superior Técnico, Universidade de Lisboa (Lisboa, Portugal)
2015/05/22 Development of CPU cooling systems using dielectric boiling fluids 1st Seminar of Advances in Technology, Southampton Solent University
Southampton Solent University (Southampton)
2014/09 Dynamics of droplets of biological fluids over enhanced surfaces with and without electrostatic actuation 26th Annual Conference on Liquid Atomization and Spray Systems – ILASS 2014
ILASS - Institute for Liquid Atomization and Spray Systems (Bremmen, Germany)
2014/07/07 Thermal and fluid dynamic processes occurring during liquid boiling over micro-and-nano enhanced surfaces 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics - HEFAT2014
HEFAT (Orlando, United States)
2014/07 Experimental characterization of the post-impact behavior of non-Newtonian droplets 17th International Symposium on Laser Techniques Applied to Fluid Mechanics
(Lisboa, Portugal)
2014/05/08 Heat and mass transfer at interfaces between solid surfaces and non-Newtonian fluids International Heat Transfer Symposium – IHTS2014, Beijing
(Beijing, China)
2014/04/15 Recent achievements on the application of micro-enhanced surfaces with bio-inspired structures to heat and mass transport 2th BioApproNFS-Wett Workshop
The University of Nottingham (Nottingham, United Kingdom)
2013/09 Droplet impacts of non-Newtonian fluids for bioengineering applications. A. S. Moita, D. Herrmann, A. L. N. Moreira . 24th Annual Conference of Liquid Atomization and Spray Systems – ILASS2013
ILASS - Institute for Liquid Atomization and Spray Systems (Chania, Greece)
2013/08/15 Characterization of the topography and wettability of biomimetic replicas of the surfaces of rose petals and clover leaves 4th International Conference of Bionic Engineering - ICBE 2013
ISBE - International Society of Bionic Engineering (Nanjing, China)
2013/08/13 The role of bionic and biomimetics in Mechanical Engineering: fundamental studies and applications 1st Workshop on the Application of Bionic Engineering at Jilin University
Key Laboratory of Bionic Engineering of the Ministry of Education of China, Jilin University (Changchun, China)
2013/08/13 Transference of complex architectures from plant surfaces for interactions with organic liquid droplets 1st Workshop on the Application of Bionic Engineering at Jilin University
Key Laboratory of Bionic Engineering of the Ministry of Education of China, Jilin University (Changchun, China)
2013/07 Evaluation of pool boiling heat transfer over micro-structured surfaces by combining high-speed visualization and PIV measurements. E PIV 2013
(Delft, Netherlands)
2013/04/19 Thermal and fluid analysis of the processes occurring in electronics cooling Invited lectures
Solent Southampton University (Southampton)
2013/04/18 Micro-technologies applied to the cooling of micro-processors Invited lectures
Solent Southampton University (Southampton, United Kingdom)
2013/04/16 Potential of low temperature boiling fluids for computer processor cooling Invited lectures
Solent Southampton University (Southampton, United Kingdom)
2012/09 From single droplet impact to micrometric droplet chains: scaling the effect of surface topography 12th International Conference on Liquid Atomization and Spray Systems ICLASS 2012
ILASS - Institute for Liquid Atomization and Spray Systems (Heidelberg, Germany)
2011/10/27 Study of liquid interactions with micro-textured surfaces for cooling applications Invited lecture
ITLR - Stuttgart University (Estugarda, Germany)
2011/09 Effect of the properties of the surrounding gas on the dynamic behaviour of bouncing droplets on a solid surface. A. S. Moita 24th Annual Conference on Liquid Atomization and Spray Systems ILASS-2011
ILASS - Institute for Liquid Atomization and Spray Sytems (Estoril, Portugal)
2010/10/14 Drop-dynamic processes under extreme conditions Invited lecture
ITLR - Stuttgart University (Estugarda, Germany)
2010/09 Assessment of heat transfer measurements at droplet/wall interactions: relation with the impact conditions 23rd Annual Conference on Liquid Atomization and Spray Systems ILASS 2010
ILASS - Institute for Liquid Atomization and Spray Systems (Brno, Czech Republic)
2010/09 Heat transfer mechanisms at droplet/wall interactions: experiments and theory 23rd Annual Conference on Liquid Atomization and Spray Systems ILASS 2010
ILASS - Institute for Liquid Atomization and Spray Sytems (Brno, Czech Republic)
2010/08 Heat transfer during drop impact onto a heated surface. A. S. Moita, A. L. N. Moreira, Ilia Roisman ASME International Heat Transfer Conference, IHTC – 14
ASME (Washington, United States)
2010/07 Scaling the effects of surface topography in the secondary atomization resulting from droplet/wall interactions 15th International Symposium on Applications of Laser Techniques to Fluid Mechanics
(Lisboa, Portugal)
2009/07 Evaluation of the cooling performance of individual droplets impinging onto heated targets 11th Triennial International Annual Conference on Liquid Atomisation and Spray Systems
ILASS - Institute for Liquid Atomization and Spray Systems (Vail, United States)
2008/09 Boiling morphology and heat removal of impinging coolant droplets 22nd European Conference on Liquid Atomization and Spray Systems – ILASS2008
ILASS - Institute for Liquid Atomization and Spray Systems (Como Lake, Italy)
2008/07 Development of an empirical correlation to predict secondary atomization of impacting boiling droplets 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics
(Lisboa, Portugal)
2008/02/25 Integrated (micro)Energy Systems and Manufacturing - Case study 2: wettability, spreading and Interfacial phenomena Seminário MIT Portugal Pos-Graduation Program, (EDAM – Engineering Design and Advanced Manufacturing)
Faculdade de Engenharia Universidade do Minho (Campus de Azurém) (Guimarães, Portugal)
2007/10/18 Experimental study of fuel drop impacts onto rigid surfaces: the consequences for fuel injection in Internal Combustion Engines Seminário no âmbito da disciplina de Métodos Experimentais em Energia e Ambiente, do 5º ano do Mestrado Integrado em Engenharia Mecânica - Instituto Superior Técnico
Instituto Superior Técnico Universidade de Lisboa (Lisboa, Portugal)
2007/09 Experimental characterization of droplet break-up from impacts onto hot metallic surfaces 12th International Symposium on Flow Visualization
(Goettingen, Germany)
2007/06 Characterization of hydrodynamics and heat-transfer processes of drop impacts against surface enhanced heated targets as an application to microelectromechanical cooling devices International Conference on Multiphase Flow ICMF 2007
(Leipzig, Germany)
2006/06 Secondary atomization of drop impactions onto heated surfaces 13th Int. Symp on Applications of Laser Techniques to Fluid Mechanics
(Lisboa, Portugal)
2006 Experimental study of fuel drop impacts onto rigid surfaces: morphological comparisons, disintegration limits and secondary atomization Proceedings 31st IEEE International Symposium on Multiple-Valued Logic ISMVL-0
The Combustion Institute (Heidelberg, Germany)
2005/09 The interaction of Fuel Droplets with Heated Interposed Surfaces in IC Engines 7th International Conference on Engines for Automobiles
SAE International (Capri, Italy)
2005/09 The combined effects of surface topography and heat transfer on droplet/wall interaction mechanisms The combined effects of surface topography and heat transfer on droplet/wall interaction mechanisms
ILASS - Institute of Liquid Atomization and Spray Systems (Orleans, France)
2004/11 Efeito das propriedades da superfície nos mecanismos de desintegração de gotas incidentes: estudo fundamental para o impacto de gotas de combustível nas superfícies do cilindro 4as Jornadas Politécnicas de Engenharia
(Porto, Portugal)
2003/11 Influência das propriedades da superfície no comportamento dinâmico de gotas de combustível incidentes nas paredes do cilindro 3as Jornadas Politécnicas de Engenharia
(Coimbra, Portugal)
2003/07 Influence of surface properties on the dynamic behaviour of impacting droplets 9th International Conference on Liquid Atomization and Spray Systems
ILASS - Institute for Liquid Atomization and Spray Systems (Sorrento, Italy)
2002/11 MOTORES DE INJECÇÃO DIRECTA: comportamento dinâmico das gotas de combustível ao incidirem nas superfícies do cilindro Blucher Design Proceedings
Editora Blucher (Setúbal, Portugal)
2002/09 The dynamic behaviour of single droplets impacting onto a flat surface 18th Annual Conference on Liquid Atomization and Spray Systems
(Saragoça, Spain)
2001/11 MOTORES DE INJECÇÃO DIRECTA: comportamento dinâmico das gotas de combustível ao incidirem nas superfícies do cilindro 1as Jornadas Politécnicas de Engenhari
(Leiria, Portugal)

Supervision

Thesis Title
Role
Degree Subject (Type)
Institution / Organization
2024/02/01 - Current Utilização de atuadores acústicos e elétrodos com superfícies modificadas (hidrofóbicas/hidrofílicas) para a produção de hidrogénio verde
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2024/02/01 - Current Solar Panels Colling Effect Applied to UAVs: An Approach to Improve Energy Performance.
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/11/01 - Current Characterization of the movement of platelets in red blood cell (RBC) using Defocusing Particle Tracking Velocimetry (DPTV)
Co-supervisor
Engenharia Mecânica (Master)
Karlsruher Institut für Technologie, Germany
2023/09/11 - Current Estudo dos mecanismos de cavitação em permutadores de calor liquido/gas – Charge air cooler (CAC) com a Empresa JDeus
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/09/11 - Current Teste e caracterização de um protótipo de um permutador baseado em microcanais para arrefecimento de um painel fotovoltaico concentrado
Supervisor
Engenharia Mecânica
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/09/11 - Current Desenvolvimento de um sistema de gestão térmica para os componentes eletrónicos em veículos aéreos não tripulados
Supervisor
Engenharia Aeroespacial (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/09 - Current Desenvolvimento de um sistema de teste de soluções de arrefecimento a líquido combinado com superfícies micro e nanoestruturadas
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/02/01 - Current Desenvolvimento e teste de uma instalação experimental para estudar os efeitos da geometria e condições experimentais em escoamento interno: aplicação a escoamentos bifásicos à micro escala.
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/10/01 - Current Modelling of a sustainable hydrogen system in Europe
Co-supervisor
Sistemas Sustentáveis de Energia (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/09 - Current Development of a combustion chamber for nanofluids
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/09 - Current Characterização da dinâmica de bolhas em escoamento multifásico num canal, para reduzir instabilidades num sistema de refrigeração para painéis solares de alta concentração
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/02/01 - Current Estudo do efeito da modificação das superfícies/nanofluidos para controlar o escoamento bifásico em microcanais para arrefecimento de painéis solares de alta concentração.
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/03 - Current Development of a combustion chamber for nanofuels
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/01/01 - Current Estudo paramétrico de optimização da geometria de tubos corrugados com fluidos complexos para maximização da transmissão de calor em escoamentos internos
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/12 - Current Nanofuel single droplet combustion
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/11 - Current Revestimentos superhidrofóbicos resistentes à ebulição em meio quiescente
Co-supervisor
Engenharia Mecânica
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/11 - Current TMP4NPs: A novel Theranostics Microfluidic Platform (TMP) for the assessment of nanoparticles (NPs) towards the diagnosis and therapy of cancer cells
Co-supervisor
Engenharia Biomédica (PhD)
Universidade do Minho - Campus de Azurém, Portugal
2020/09 - Current Three-dimensional characterization of cardiovascular flows with in vitro experiments and defocus-based particle tracking
Supervisor
Engenharia Mecânica
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/03/01 - Current Caracterizaçao de fluidos biomimeticos para uso em dispositivos microfluidicos em estudos de deformabilidade de células
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/09/01 - Current High Energy Density Fuels in Aviation Gas Turbines: Experiments and Modelling
Co-supervisor
Engenharia Aeronáutica (PhD)
Universidade da Beira Interior, Portugal
2018/02/08 - Current Development of a liquid cooling system based on micro-structures integrated in High Concentration Photovoltaic Panels (HCPV)
Supervisor
Sistemas Sustentáveis de Energia (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/09 - 2033 Spray characterization of an alternative and conventional fuel
Supervisor
Engenharia Aeroespacial (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/10/10 - 2024/04/10 Stage to perform part of the PhD work in biofluels
Co-supervisor
Università del Salento, Italy
2023/01 - 2023/11 Alkaline water electrolysis: ultrasonic presence and hydrogen bubble formation.
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/10 - 2023/11 Estudo das condições críticas de ocorrência de ebulição em permutadores de calor para automóveis (colaboração com a empresa JDeus)
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/09 - 2023/03 Evaluation of the use of nanofluids in a microchannel based cooler to be integrated into a concentrated phtovoltaic panel.
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/02 - 2023/01 Combustion characteristics of alternative nanofuels for aviation
Supervisor
Engenharia Mecânica
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/02 - 2023 Desenvolvimento de um evaporador inovador, integrando actuação electrostática, para optimização de um sistema de arrefecimento do tipo heat pipe, para o arrefecimento de baterias em veículos eléctricos
Supervisor of Pedro Miguel Leitão de Carvalho Santos
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019 - 2023 Desenvolvimento de um evaporador inovador, integrando actuação electrostática, para optimização de um sistema de arrefecimento do tipo heat pipe, para o arrefecimento de baterias em veículos eléctricos
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/09 - 2022/12 Stage of a PhD student for 3 months : Study of the thermal conductivity of hybrid nanofluids applied in microchannel thermal dissipation systems
Co-supervisor
Universidad de Santiago de Chile, Chile
2021/09 - 2022/12 Sistema de arrefecimento corporal no uso de fatos de proteção NBQR
Supervisor
Engenharia Mecânica Militar (Master)
Academia Militar - Campus da Amadora, Portugal
2021/01 - 2022/07 Study of the geometry of microchannels based heat sinks to cool high-concentrated photovoltaic cells
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/04/01 - 2022/02/04 Comparison of solar hydrogen production in Portugal and in southern Germany and experimental validation with an alkaline electrolyser
Co-supervisor
Master in Energy Engineering (Master)
Hochschule für Technik Stuttgart, Germany
2021/03/01 - 2022 Development of a combustion chamber for nanofuels
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/03 - 2022 Metodologia para avaliação dos efeitos da degradação de fluido arrefecedor em permutadores de calor para automóveis (em colaboração com a empresa JDeus)
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/12 - 2022 Estudo do escoamento multifásico em microcanais para aplicação a um sistema de refrigeração para painéis solares de alta concentração
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/06/06 - 2022 A Study on the Influence of Variable Geometry Evaporators in Organic Rankine Cycle Waste Heat Recovery of a Heavy-Duty Truck
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/03 - 2021/12/09 Estudo paramétrico de optimização da geometria de tubos corrugados com fluidos complexos para maximização da transmissão de calor em escoamentos internos
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/03 - 2021/12/09 Técnicas de Pós-processamento de imagem para métodos experimentais em termografia
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/12 - 2021/12/09 Estudo paramétrico de optimização da geometria de tubos corrugados com fluidos complexos para maximização da transmissão de calor em escoamentos internos.
Co-supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/01 - 2021/11 Estudo paramétrico de optimização da geometria de tubos corrugados com fluidos complexos para maximização da transmissão de calor em escoamentos internos.
Supervisor
Mestrado Integrado em Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/01 - 2021/11 Avaliação das condições críticas para a ocorrência de ebulição em permutadores de calor liquído/gas – Charge air cooler (CAC)
Supervisor
Mestrado Integrado em Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/11 - 2021/02/28 Characterization of red blood cells (RBC's) and analogue blood fluids flow in microchannels
Supervisor
Engenharia Biomédica (Estágio) (Master)
Université de Franche-Comté UFR Sciences et Techniques, France
2020/11 - 2021/02/28 Evaporation of droplets on various surfaces and its relation with corona virus likehood survival.
Supervisor
Engenharia Biomédica (Estágio) (Master)
Université de Franche-Comté UFR Sciences et Techniques, France
2020/09 - 2021/01 Caracterização da transferência de calor no impacto de sprays de nanofluidos em superficies sólidas aquecidas
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/03 - 2021/01 Estudo paramétrico de optimização da geometria de tubos corrugados para maximização da transmissão de calor em escoamentos internos
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/03 - 2021/01 Modelling and experimental validation of an alkaline electrolysis cell for hydrogen production
Supervisor
Engenharia Mecânica
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/02/17 - 2021/01 Disserteção de Mestrado Integrado em Engenharia Química (Instituto Superior Técnico – em parceria com a JJ Cooling Innovation Sàrl/EPFL - École Polytechnique Fédérale de Lausanne)
Supervisor of Guilherme da Silveira Ribeiro Bruges Armas
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/09/01 - 2021/01 Experimental and computational evaluation of the thermohydraulic performance of compact, gravity-driven, closed-loop thermosyphon cooling systems
Co-supervisor
Engenharia Química (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/09 - 2021/01 Metodologia para avaliação da degradação de fluido arrefecedor em permutadores de calor para automóveis
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/12/05 - 2021 Nanofuel single droplet combustion
Co-supervisor
Engenharia Mecânica
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/03/01 - 2021 Efeito do processo de síntese de nanofluidos nas suas propriedades termofísicas
Supervisor of Ricardo Cortinhas Rita Santos
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/12/01 - 2020/11/30 Estagio de 1 ano no IST ao abrigo do financiamento da FAPESP Desenvolvimento de um modelo semi-empírico para a predição do coeficiente de transferência de calor em espumas metálicas.
Co-supervisor
Programa de Pós-Graduação de Engenharia Mecânica (PhD)
Universidade Estadual Paulista Júlio de Mesquita Filho - Câmpus de Ilha Solteira, Brazil
2019/09 - 2020/11 Estudo dos mecanismos de ebulição em permutadores de calor liquido/gas – water charge air cooler (WCAC)
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/09 - 2020/11 Optimization tool for th design of heat exchangers
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/09 - 2020/11 Sistema de refrigeração por microcanais com escoamento multifásico para painéis solares de alta concentração
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/09 - 2020/11 Nanofluid spray cooling characterization combining phase Doppler Anemometry with high-speed visualization and thermography
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/05/01 - 2020/05 Pool boiling of nanofluids using biphilic surfaces
Co-supervisor
Engenharia Mecânica (Master)
Universidade do Minho - Campus de Azurém, Portugal
2019/09/09 - 2019/12/22 Estágio de 1 aluno de Doutoramento no âmbito do programa ERAMUS +, com acordo assinado entre a University of Zilina, na Eslováquia e o Instituto Superior Técnico. Studies on microfluidic flows to infer on cell deformability in microchannels
Co-supervisor
Žilinská univerzita v Žiline, Slovakia
2019/02 - 2019/11/29 Experimental and numerical characterization of the flow and heat transfer inside corrugated pipes
Supervisor of Gonçalo Jorge Granjal Cruz
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/02 - 2019/11/29 Experimental characterization of the flow and heat transfer inside a horizontal circular tube using C60/tetralin nanofluid
Supervisor of Rita Adrião Lamosa
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/09 - 2019/11/25 Dinâmica de fluidos biomiméticos usados em dispositivos microfluídicos do tipo lab-on-a-chip
Supervisor of Cristiana da Silva Caldeira
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017/02 - 2019/11/22 Projeto de um sistema microfluídico para transporte de biofluidos para futuras aplicações do tipo lab-on-a-chip
Supervisor of Frederico Guilherme Ferreira Jacinto
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/03 - 2019/11 Caracterização experimental e numérica do escoamento e transmissão de calor em escoamentos no interior de tubos corrugados
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/03 - 2019/11 Experimental characterization of the flow and heat transfer inside a horizontal circular tube using C60/tetralin nanofluid
Supervisor
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/04/08 - 2019/06/28 Characterization of a microfluidc heat sink for high power dissipation applications
Supervisor
Institut National des Sciences Appliquées de Lyon, France
2018/03 - 2019/06/21 Descrição dos mecanismos de ebulição em meio quiescente usando superfícies bifílicas
Supervisor of Ricardo Miguel Mendes Cautela
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/01 - 2018/11 Estudo do arrefecimento em dissipadores de calor com recurso a nanofluidos inovadores
Co-supervisor of César Diogo Simões Rocha
Engenharia Mecanica (Master)
Universidade do Minho - Campus de Azurém, Portugal
2017/09 - 2018/11 Development of a custom made condenser for a two-phase thermosyphon cooling system for microprocessor
Supervisor of João Miguel Martins Lameiras
Engenharia Mecânica
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017/09 - 2018/11 Análise numérica e experimental das trocas de calor no fabrico aditivo: análise das trocas de calor na tecnologia FDM
Co-supervisor of António Pedro Becerra de Oliveira Pais
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017/02 - 2018/11 Caracterização experimental da transmissão de calor em escoamentos no interior de tubos corrogados
Supervisor of Filipe Arruda Andrade
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013/09 - 2017/11 Pool boiling over micro-textured surfaces
Co-supervisor of Emanuele Teodori
Engenharia Mecânica (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/09 - 2017/06 Desenvolvimento e validação de um método não intrusivo para caracterizar a molhabilidade de superfícies com estruturas complexas utilizando a técnica 3D de microscopia confocal de fluorescência de varrimento a laser
Supervisor of Joana Lúcia Marques Pereira
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/02 - 2017/06 Test and optimization of a two-phase thermosyphon cooling system for microprocessors under real working conditions
Supervisor of Vasco Tavares Brito e Abreu
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017/01/01 - 2017/05/31 Caracterização dos mecanismos de ebulição combinando PIV e LIF
Supervisor of Matthew Alan Harrison
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017/02/27 - 2017/05/26 Spray characteristics of complex fluids
Supervisor of Milan Maly
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/04 - 2016/12 Impact of non-Newtonian liquid droplets on solid surfaces
Co-supervisor of Artur Ginsheimer
Engenharia Aeroespacial (Degree)
Universität Stuttgart, Germany
2016/02 - 2016/11 Thermographical analysis of interface heat transfer mechanisms with high temporal resolution
Supervisor of Pedro Daniel Fernandes Pontes
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/02 - 2016/11 Characterization of bubble dynamics and heat transfer processes in pool boiling under extreme wetting scenarios
Supervisor of Tiago Mesquita Palma
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/09 - 2016/11 Otimização da configuração de um chip microfluidico para manipulação de fluidos biológicos por atuação eletroestática
Supervisor of Filipa Alexandra Mariano Dias da Mata
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/02 - 2016/07 Construção e teste de uma instalação experimental para estudo dos mecanismos de transmissão de calor em escoamentos com convecção forçada - aplicação a sistemas de recuperação de energia térmica em veículos
Supervisor of Filipe André Caldeira Ferreira
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/04 - 2016/01 Spreading dynamics of non-Newtonian droplets of aqueous solutions of Praestol 2500 and 2540 upon impact onto solid surfaces
Supervisor of Moritz Franke
Engenharia Aeroespacial (Master)
Universität Stuttgart, Germany
2015/02 - 2015/11 Design and development of a two-phase closed loop thermosyphon for CPU cooling
Supervisor of Miguel Andrade Pereira Barata Moura
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/02 - 2015/11 Study of the effects of wettability on pool boiling conditions in a quiescent medium
Supervisor of Tomás de Castro Barbosa de Sousa Valente
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/02 - 2015/11 Caracterização da resposta dinâmica de gotas de biofluidos sob actuação electrostática
Supervisor of Catarina Lopes D´ Oliveira Laurência
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013/09 - 2014/11 Estudo experimental para transporte de microgotas por actuação electroestática
Supervisor of Joana Anastácio Ramos
Bioengenharia e Nanossistemas (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014/06/09 - 2014/08/31 The role of surface enhancement in micro-cooling devices
Co-supervisor of Denis de Oliveira
INP Grenoble - Master Micro and Nano Technologies for Integrated Systems - Nanotech (Other)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014/02 - 2014/04 Development and control of a condensation system using Peltier Cells
Co-supervisor of António Manuel Rainha Pereira Maciel
Engenharia Eletrotécnica e de Computadores (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013/04 - 2014/01 Heat and mass transfer mechanisms at droplet/wall interactions using non-Newtonian fluids
Co-supervisor of Dominic Hermann
Engenharia Aeroespacial (Degree)
Universität Stuttgart, Germany
2013/02 - 2013/10 Experimental description of collisions between droplets of different miscible substances
Co-supervisor of Miguel Fernandes Martins
Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2011/04 - 2012/01 Characterization of the secondary atomization and thermal behaviour of a micro-droplet stream onto heated and enhanced surfaces
Co-supervisor of Stefan Sauer
Engenharia Aeroespacial (Degree)
Universität Stuttgart, Germany
2011/04 - 2011/11 Estudo dos fenómenos térmicos e hidrodinâmicos na interacção de gotas de líquidos com superfícies micro-estruturadas no contexto de uma aplicação a sistemas de arrefecimento
Co-supervisor of Tiago Miguel Serras Bica
Engenharia Mecânica
Universidade de Lisboa Instituto Superior Técnico, Portugal
2011/02 - 2011/11 Study of pool boiling mechanisms in the context of cooling applications
Co-supervisor of Emanuele Teodori
Engenharia Energética (Master)
Universita degli Studi di Roma Tor Vergata, Italy
2010/09 - 2011 Fluid dynamic and heat transfer processes at droplet impact onto micro-textured surfaces
Co-supervisor of Matteo Tata
Engenharia Energética (Master)
Universita degli Studi di Roma Tor Vergata, Italy
2009/02 - 2009/09 Experimental study of the heat transfer phenomena during the impact of boiling droplets
Co-supervisor of Matteo Morais
Engenharia Energética (Master)
Universita degli Studi di Roma Tor Vergata, Italy

Event organisation

Event name
Type of event (Role)
Institution / Organization
2023/07 - Current Organizing Committee of the 21st International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics 08 - 11 July 2024, Lisbon, Portugal (2023/07/08 - 2023/07/11)
Conference (Member of the Organising Committee)
2023 - Current Scientific Advisory Board of 1st North American Conference on Sustainable Development of Energy, Water and Environment Systems - NA.SDEWES2024 (2024/06/16 - 2024/06/20)
Conference
2023 - Current Membro do International Programme Committee of the 49th International Conference on Applications of Mathematics in Engineering and Economics 10-16 June 2023 TU Sofia, Sofia, Bulgária. Chair of the Work "Deep Nature" Innovative AI Methods for Investigating Environmental Pollution Problems Causing to Climate Change" to occur in this conference. 49th International Conference (fpmi.bg) (2023/06/10 - 2023/06/16)
Conference (Member of the Organising Committee)
2022/01/01 - Current Membro do Program Committee do Biodevices 2022 - 15th International Conference on Biomedical Electronics and Devices, Online streaming, 22-24 Fevereiro 2022 http://www.biodevices.biostec.org/ProgramCommittee.aspx?y=2021 (2022/02/22 - 2022/02/24)
Conference
2022/01/01 - Current Membro do Advisory Committee do 20th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, Lisbon, Portugal, 11–14 July 2022. http://www.lisbon-lasersymposium.org/LXLASER2022/committees/advisory-committee (2022/07/11 - 2022/07/14)
Conference (Member of the Scientific Committee)
2022 - Current Scientific Committee of the 23rd European Meeting on Liquid Atomization and Spray Systems, 4-7 September, Naples, Italy, 2023. (2023/09/04 - 2023/09/07)
Conference (Member of the Scientific Committee)
ILASS - Institute for Liquid Atomization and Spray Systems, United States
2021/06/01 - Current Program committee of WCB 2022 - 9th World Congress of Biomechanics (WCB 2022, https://www.wcb2022.com ) to be held in Taipei, Taiwan, from July 10 to 14, 2022 (2022/07/10 - 2022/07/14)
Conference (Member of the Organising Committee)
2020/01/01 - Current Membro do Program Committee do Biodevices 2021 - 15th International Conference on Biomedical Electronics and Devices, Online streaming, 11-13 Fevereiro 2021 http://www.biodevices.biostec.org/ProgramCommittee.aspx?y=2021 (2021/02/11 - 2021/02/13)
Conference (Member of the Scientific Committee)
2019/09/25 - Current Chair (Hosting & Programme Director) of the LIDESP VIII – International Advanced Course in Liquid Interfaces, Drops and Sprays, Lisbon, Portugal, 9-10 Julho 2020. http://lidesp8.tecnico.ulisboa.pt/ (2020/07/09 - 2020/07/10)
Conference (Co-organisor)
2019/01/01 - Current Membro do Scientific CommitteeTechnical Committee do ILASS 2019 - 29th European Conference on Liquid Atomization and Spray Systems, 2-4 September 2019, Paris, France. https://ilass19.sciencesconf.org/data/pages/ILASS19_booklet_V5.pdf (2019/09/02 - 2019/09/04)
Conference (Member of the Scientific Committee)
2016 - Current Membro do Advisory Committee do 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, Lisbon, Portugal, 16–19 July 2018. http://www.lisbon-lasersymposium.org/LXLASER2018/committees/advisory-committee Advisory na organização das sessões e revisão dos artigos científicos (2018/07/16 - 2018/07/19)
Conference (Member of the Scientific Committee)
2023 - 2024 Scientific Advisory Board of the 19th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2024, 8-12 September 2024, Rome, Italy (2024/09/08 - 2024/09/12)
Conference (Member of the Scientific Committee)
2022/07/08 - 2023/08/09 Membro do organizing committee (Track Organizer) do 7th ASME Micro/Nanoscale Heat & Mass Transfer International Conference (MNHMT-23), Nottingham, UK, August 7-9, 2023) (2022/07/08 - 2023/08/09)
Conference (Member of the Organising Committee)
The American Society of Mechanical Engineers Little Falls, United States
2022/03/22 - 2023/02/18 Membro do organizing committee (Program chair) 16th International Conference on Biomedical Electronics and – BIODEVICES 2023, Lisbon, Portugal, 22–24 February 2023. https://biodevices.scitevents.org/ (2022/02/16 - 2023/02/18)
Conference (Member of the Organising Committee)
INSTICC – Institute for Systems and Technologies of Information, Control and Communication, Portugal
2021/01/01 - 2021/09/02 Scientific Committee of ICLASS 2021 – International Conference on Liquid Atomization and Spray Systems, 29 August -2 September 2021, Edimburgh, Scotland. http://www.iclass2021.efconference.co.uk/iclass-2o21-committee/ (2021/08/29 - 2021/09/02)
Conference (Member of the Scientific Committee)
2021/03/01 - 2021/07/28 Technical Programme Committee of ATE-HEFAT 2021- 15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Virtual Conference, 25-28 July 2021. https://hefat2021.org/committee/ (2021/07/25 - 2021/07/28)
Conference (Member of the Scientific Committee)
2020/06/26 - 2021/05/26 Jornadas de Engenharia da Academia Militar 2020 (2021/05/26 - 2021/05/26)
Conference (Co-organisor)
Academia Militar - Campus da Amadora, Portugal
2020/02/10 - 2021/05 Membro do International Scientific Advisory Committee do CMEM 2021 - 20th Computational Methods and Experimental Measurements (Wessex Conference Series), Rome, May 2021. (2020/02 - 2021/05)
Conference (Member of the Scientific Committee)
2020/09/01 - 2021/02/14 Biodevices 2021 - 14th International Conference on Biomedical Electronics and Devices, Online Streaming - Programme Comittee (2021/02/11 - 2021/02/14)
Conference
INSTICC – Institute for Systems and Technologies of Information, Control and Communication, Portugal
2019/09/04 - 2020/09/09 Scientific Committee of ILASS 2020 - 30th European Conference on Liquid Atomization and Spray Systems, 7-9 September 2020, Tel-Aviv, Israel. (2020/09/07 - 2020/09/09)
Conference (Member of the Scientific Committee)
ILASS - Institute for Liquid Atomization and Spray Systems, United States
2019/09/01 - 2020/09/09 Scientific Committee of ILASS 2020 - 30th European Conference on Liquid Atomization and Spray Systems, 7-9 September 2020, Tel-Aviv, Israel. (2020/09/07 - 2020/09/09)
Conference (Member of the Scientific Committee)
2019/10/01 - 2020/07/16 Membro do Advisory Committee do 20th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics, Lisbon, Portugal, 13–16 July 2020. http://www.lisbon-lasersymposium.org/lxlaser2020/committees/advisory-committee (2020/07/13 - 2020/07/16)
Conference (Member of the Scientific Committee)
2019/09/01 - 2020/02/26 Membro do Program Committee do Biodevices 2020 - 13th International Conference on Biomedical Electronics and Devices, Valletta, Malta, 24-26 February 2020. http://www.biodevices.biostec.org/ProgramCommittee.aspx (2020/02/24 - 2020/02/26)
Conference (Member of the Scientific Committee)
2018 - 2019 Membro do Program Committee do Biodevices 2019 - 12th International Conference on Biomedical Electronics and Devices, Prague, Czech Republic, 22-24 February 2019. http://www.biodevices.biostec.org/ Organização e divulgação de sessões e revisão cientifica dos artigos (2019/02/22 - 2019/02/24)
Conference (Member of the Scientific Committee)
INSTICC – Institute for Systems and Technologies of Information, Control and Communication, Portugal
2017 - 2018 Membro do Technical Committee do ICLASS 2018 – 14th International Conference on Liquid Atomization and Spray Systems, 22-26 July 2018, Chicago, Il, USA. http://www.iclass2018.org/committees.html Organização das sessões e revisão cientifica de artigos (2018/07/22 - 2018/07/26)
Conference (Member of the Scientific Committee)
ILASS - Institute for Liquid Atomization and Spray Systems, United States
2017 - 2018 Membro do Program Committee do Biodevices 2018 - 11th International Conference on Biomedical Electronics and Devices, Funchal, Madeira, 19-21 January 2018. http://www.biodevices.biostec.org/ProgramCommittee.aspx Organização de sessões e revisão de artigos (2018/01/19 - 2018/01/21)
Conference (Member of the Scientific Committee)
INSTICC – Institute for Systems and Technologies of Information, Control and Communication, Portugal
2016 - 2017 Membro do Scientific Committee do ILASS-Europe 2017 Valência – 28th European Conference on Liquid Atomization and Spray Systems, 6-8 September 2017. https://www.cmt.upv.es/ILASS2017/ILASS01_01.aspx Organização de sessões, divulgação do evento, organização e controlo de deadlines, revisão dos artigos cientificos (2017/09/06 - 2017/09/08)
Conference (Member of the Scientific Committee)
ILASS - Institute for Liquid Atomization and Spray Systems, United States
2015 - 2016 Membro do Technical Programme Committee da 5th International Conference of Bionic Engineering-ICBE2016 Ningbo, China, 21-24 June 2016 http://www.isbe-online.org/?ui=english&mod=info&act=view&id=930 Organização de sessões e revisão dos artigos científicos (2016/06/21 - 2016/06/24)
Conference (Member of the Scientific Committee)
ISBE - International Society of Bionic Engineering, China
2015 - 2016 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics. Lisbon, Portugal, 4-7 July 2016. (2016/07/04 - 2016/07/07)
Conference (Other)
2014 - 2015 Membro do Scientific and Program Committee do ICLASS 2015 – 13th International Conference on Liquid Atomization and Spray Systems, Tainan, Taiwan, 23-27 August 2015. http://iclass2015.tw/index.php?inter=committee&coId=3 Organização de sessões, divulgação do evento e revisão dos artigos cientificos (2015/08/23 - 2015/08/27)
Conference (Member of the Scientific Committee)
ILASS - Institute for Liquid Atomization and Spray Systems, United States
2014 - 2015 Organização da 4rd BioApproNFS-Wett - in the context of the network of the Marie-Curie project “BioApproNFS-Wett - Biomimetic Approaches of Natural Functional Surfaces with hierarchical micro & nano structure and the extreme Wettability”, Lisbon, Portugal 4-5 Junho 2015. http://isbe-online.org/?ui=english&mod=info&act=view&id=1678 Organização de todo o evento (2015/06/04 - 2015/06/05)
Workshop (President of the Organising Committee)
ISBE - International Society of Bionic Engineering, China
2013 - 2014 17th International Symposium on Applications of Laser Techniques to Fluid Mechanics. Lisbon, Portugal, 7-10 July 2014. Participação nas actividades de organização, recepção de resumos e artigos, organização no local, coordenação das sessões e revisão dos artigos cientificos (2014/07/07 - 2014/07/10)
Conference (Other)
2011 - 2012 Membro do Scientific and Program Committee do ICLASS 2012 - 12th International Conference on Liquid Atomization and Spray Systems, Heidelberg Germany, 2-6- September 2012 http://www.iwr.uni-heidelberg.de/conferences/iclass2012/index.php?content=3 Organização de sessões, divulgação do evento e revisão dos artigos cientificos (2012/09/02 - 2012/09/06)
Conference (Member of the Scientific Committee)
ILASS - Institute for Liquid Atomization and Spray Systems, United States
2011 - 2012 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics. Lisbon, Portugal, 9-12 July 2012 Participação nas actividades de organização, recepção de resumos e artigos, organização no local, coordenação das sessões e revisão dos artigos cientificos (2012/07/09 - 2012/07/12)
Conference (Other)
2010 - 2011 Integrei o Program e Local Organizing Committee do ILASS 2011 – 24th European Conference on Liquid Atomization and Spray Systems, que se realizou no Estoril, de 5 a 7 de Setembro de 2011. (2011/09/05 - 2011/09/07)
Conference (Member of the Organising Committee)
ILASS - Institute for Liquid Atomization and Spray Systems, United States
2009 - 2010 15th International Symposium on Applications of Laser Techniques to Fluid Mechanics. Lisbon, Portugal, 5-8 July 2010 Participação nas actividades de organização, recepção de resumos e artigos, organização no local, coordenação das sessões e revisão dos artigos cientificos (2010/07/05 - 2010/07/08)
Conference (Other)
2007 - 2008 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics. Lisbon, Portugal, 7-10 July 2008 Participação nas actividades de organização, recepção de resumos e artigos, organização no local, coordenação das sessões e revisão dos artigos cientificos (2008/07/07 - 2008/07/10)
Conference (Other)
2005 - 2006 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics. Lisbon, Portugal, 26-29 June 2006. Participação nas actividades de organização, recepção de resumos e artigos, organização no local, coordenação das sessões e revisão dos artigos cientificos (2006/06/26 - 2006/06/29)
Conference (Other)

Jury of academic degree

Topic
Role
Candidate name (Type of degree)
Institution / Organization
2023/11 Desenvolvimento de uma câmara aquecida para a impressora 3D creality ENDER 3 PRO de tecnologia FDM
(Thesis) Main arguer
Diogo Feijó Freitas da Costa (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/11 Estudo das condições críticas de ocorrência de ebulição em permutadores de calor para automóveis
Supervisor
Filipe Garcia Alves (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/11 Alkaline water electrolysis: ultrasonic presence and hydrogen bubble formation.
Supervisor
Filipe Guarda Araújo (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/07 Modelling and experimental validation on gas-liquid separators, with application to an oxygen-water mixture from electrolyzer in a hydrogen production unit
(Thesis) Main arguer
Tomás de Almeida Carvalho (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/07 Desenvolvimento de um evaporador inovador, integrando actuação electrostática, para optimização de um sistema de arrefecimento do tipo heat pipe, para o arrefecimento de baterias em veículos eléctricos
Supervisor
Pedro Miguel Leitão de Carvalho Santos (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/07 Spray characterization of an alternative and conventional fuel
Supervisor
Ana Sofia Oliveira Ladino (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/03 Geração de bolhas em atomização efervescente
(Thesis) Main arguer
Miguel Toste dos Santos Alves (Master)
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal
2023/03 Evaluation of the use of nanofluids in a microchannel based cooler to be integrated into a concentrated phtovoltaic panel
Supervisor
Rodrigo Gonçalves Solipa (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/12 Estudo de aspectos transiente do mecanismo de ebulição convectiva no interior de microcanais através de termografia IR
(Thesis) Arguer
Mauricio Mani Marinheiro (PhD)
Escola de Engenharia de S. Carlos, Universidade de S. Paulo, Brazil
2022/12 Utilização do CEA na gestão de energia dos edifícios do Exército
(Thesis) Main arguer
António Pedro Nunes da Silva Gonçalves (Master)
Academia Militar - Campus da Amadora, Portugal
2022/12 Sistema de arrefecimento corporal no uso de fatos de proteção NBQR
Supervisor
Miguel Ângelo Mendes Alcaide Fernandes (Master)
Academia Militar, Portugal
2022/11/15 A Study on the Influence of Variable Geometry Evaporators in Organic Rankine Cycle Waste Heat Recovery of a Heavy-Duty Truck
Supervisor
João David Ferreira de Silva e Sá (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/11 Contact angle influence in capillary flows
(Thesis) Main arguer
Diogo Dias Navarro Ferreira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/09/08 Simulação de tiro na vertente de simulação e de treino: Contributos para uma maior eficiência operacional e sustentação logística
President of the jury
Tiago dos Anjos Dias (Master)
Academia Militar - Campus da Amadora, Portugal
2022/09/08 Simulação de tiro na vertente de simulação e de treino: Contributos para uma maior eficiência operacional e sustentação logística
President of the jury
Tiago dos Anjos Dias (Master)
Academia Militar - Campus da Amadora, Portugal
2022/07/06 Modelling and experimental validation of an alkaline ammonia electrolysis cell for hydrogen production
(Thesis) Main arguer
Vasco Van Mourik Guerra de Zoio Reis (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/06/29 Estudo da geometria do canal para maximização das trocas de calor convectivas num sistema de arrefecimento por microcanais para painéis solares de alta concentração
Supervisor
David Silva Carvalho (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/06/29 Estudo do escoamento multifásico em microcanais para aplicação a um sistema de refrigeração para painéis solares de alta concentração
Supervisor
Iva Andrea Alvarinho Gonçalves (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/06/27 Development of a combustion chamber for nanofuels
Supervisor
Ricardo Jorge Falcão Santos (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/02/04 Desenvolvimento de placas arrefecedoras de alto desempenho para arrefecimento de componentes electrónicos
(Thesis) Main arguer
Pedro Dias Mata (Master)
Universidade do Minho - Campus de Azurém, Portugal
2022 Avaliação da degradação de um fluido refrigerador usado em intercoolers de automóveis
Supervisor
Duarte Miguel Niza Meira Jesus (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/12/14 Avaliação das condições críticas para a ocorrência de ebulição em permutadores de calor liquído/gas – Charge air cooler (CAC)
Supervisor
Alexandre Ferreira Teixeira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/12/14 Avaliação das condições críticas para a ocorrência de ebulição em permutadores de calor liquído/gas – Charge air cooler (CAC).
Supervisor
Alexandre Ferreira Teixeira, Nº84499 (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/12/10 UTILIZAÇÃO DE SUPERFÍCIES ESTENDIDAS - ESPUMAS METÁLICAS - PARA INTENSIFICAÇÃO DA TRANSFERÊNCIA DE CALOR POR EBULIÇÃO
(Thesis) Arguer
Leonardo Lachi Manetti (PhD)
Universidade Estadual Paulista Júlio de Mesquita Filho - Câmpus de Ilha Solteira, Brazil
2021/12/09 Estudo paramétrico de optimização da geometria de tubos corrugados com fluidos complexos para maximização da transmissão de calor em escoamentos internos João Afonso Vicente Silva (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/12 UTILIZAÇÃO DE SUPERFÍCIES ESTENDIDAS - ESPUMAS METÁLICAS - PARA INTENSIFICAÇÃO DA TRANSFERÊNCIA DE CALOR POR EBULIÇÃO
(Thesis) Arguer
Leonardo Lachi Manetti (PhD)
Universidade Estadual Paulista Júlio de Mesquita Filho, Brazil
2021/11/25 Cooling of a tube by a two-phase flow under microgravity conditions
(Thesis) Main arguer
Tomás Pereira Nave Henriques da Silva (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/11/09 Estudo paramétrico de optimização da geometria de tubos corrugados com fluidos complexos para maximização da transmissão de calor em escoamentos internos
Supervisor
João Afonso Vicente Silva (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/10/20 Numerical characterization and flow optimization and heat transfer inside corrugated tubes
(Thesis) Main arguer
Milton Mateush (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/10/13 Numerical investigation of the expansion devices applied in modern vapour compression refrigeration unit considering specific entropy and entropy generation analyses
(Thesis) Main arguer
Rafal Poltr Fingas (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/10/12 The impact of alumina nanofluids on pool boiling performance
Supervisor
Ricardo Cortinhas Rita Santos (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/10/06 Numerical modeling of elecrostatic spray painting processes with a rotating bell cup for automotive painting
(Thesis) Arguer
Mohammad-Reza Pendar (PhD)
Universidade da Beira Interior, Portugal
2021/06/05 A study of the blood flow behaviour in microchannel networks
(Thesis) Main arguer
David André Bento (PhD)
Universidade do Porto, Portugal
2021/04/01 Collision dynamics of a single droplet onto a heated dry surface: Jet fuel and HVO mixtures
(Thesis) Main arguer
Pedro Miguel Moreira Pinto (Master)
Universidade da Beira Interior, Portugal
2021/03/16 Plataforma de gestão de Energia para Edifícios do Exército
(Thesis) Main arguer
Joni André Santo Bernardo (Master)
Academia Militar, Portugal
2021/01 Noninvasive evaluation of heat transfer in microfluidic channels using light induced fluorescence
(Thesis) Arguer
Miguel Filipe Azevedo Figueira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/01 Concept Development for Lower Limb Exoskeleton
(Thesis) Arguer
Artur Jorge Silva Coutinho Machado (Master)
Academia Militar - Campus da Amadora, Portugal
2021/01 Caracterização experimental da transferência de calor em escoamento interno para misturas de água e etilenoglicol
Supervisor
Rúben Alexandre Páscoa Ezequiel (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/01 Characterization of heat transfer in nanofluid spray cooling of a solid heated surface
Supervisor
Miguel Patrik Jyllilä Sanches (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/01 Estudo paramétrico de otimização da geometria de tubos corrugados para maximização da transmissão de calor em escoamentos internos
Supervisor
André Cacilhas Machado (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/11 Sistema de refrigeração por microcanais com escoamento multifásico para painéis solares de alta concentração
Supervisor
Lourenço Ormonde Martins (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/11 Optimization tool for the design of heat exchangers
Supervisor
José Miguel Outeiro Frederico Bento (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/11 Estudo dos mecanismos de ebulição em permutadores de calor líquido-gás-water charge air cooler (WCAC)
Supervisor
Gonçalo Gil dos Santos Cunha (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2020/01/24 Single-phase forced and mixed convection in the laminar and transitional flow regimes of inclined smooth tubes with inlet disturbances
(Thesis) Main arguer
Abubakar Bashir (PhD)
University of Pretoria, South Africa
2019/11/29 Experimental characterization of the flow and heat transfer inside a horizontal circular tube using C60/tetralin nanofluid
Supervisor
Rita Adrião Lamosa (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/29 Experimental and numerical characterization of the flow and heat transfer inside corrugated pipes
Supervisor
Gonçalo Jorge Granjal Cruz (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/25 Dinâmica de fluidos biomiméticos usados em dispositivos microfluídicos do tipo lab-on-a-chip
Supervisor
Cristiana da Silva Caldeira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/22 Projeto de um sistema microfluídico para transporte de biofluidos para futuras aplicações do tipo lab-on-a-chip
Supervisor
Frederico Guilherme Ferreira Jacinto (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/07/05 Estudo de sistema de refrigeração em postiços na indústria dos moldes de injecção
(Thesis) Main arguer
José Diogo Tavares Desterro (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/06/21 Descrição dos mecanismos de ebulição em meio quiescente usando superfícies bifílicas
Supervisor
Ricardo Miguel Mendes Cautela (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/11 Development of a custom made condenser for a two-phase thermosyphon cooling system for microprocessor
Supervisor
João Miguel Martins Lameiras (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/11 Caracterização experimental da transmissão de calor em escoamentos no interior de tubos corrogados
Supervisor
Filipe Arruda Andrade (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/11 Análise numérica e experimental das trocas de calor no fabrico aditivo: análise das trocas de calor na tecnologia FDM
Supervisor
António Pedro Becerra de Oliveira Pais (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2018/01 Blood rheology and red blood cell migration in microchannel flow
(Thesis) Main arguer
Margarida Domingues de Pinho (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2017/06 Test and optimization of a two-phase thermosiphon cooling system for microprocessors under real working conditions
Supervisor
Vasco Tavares Brito e Abreu (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2017/06 Desenvolvimento e validação de um método não intrusivo para caracterizar a molhabilidade de superfícies com estruturas complexas utilizando a técnica 3D de microscopia confocal de fluorescência de varrimento a laser
Supervisor
Joana Lúcia Marques Pereira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/11 Otimização da configuração de um chip microfluidico para manipulação de fluidos biológicos por atuação eletroestática
Supervisor
Filipa Alexandra Mariano Dias da Mata (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/11 Characterization of bubble dynamics and heat transfer processes in pool boiling under extreme wetting scenarios
Supervisor
Tiago Mesquita Palma (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/11 Thermographical analysis of interface heat transfer mechanisms with high temporal resolution
Supervisor
Pedro Daniel Fernandes Pontes (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/07 Construção e teste de uma instalação experimental para estudo dos mecanismos de transmissão de calor em escoamentos com convecção forçada - aplicação a sistemas de recuperação de energia térmica em veículos
Supervisor
Filipe André Caldeira Ferreira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2016 Experimental and numerical investigation of pressure drop and heat in evaporators for vehicle heat recovery
Thesis Member
Olivier Gouveia (Master)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2016 Caracterização experimental da ignição de partículas isoladas de biomassa e lenhite
Thesis Member
Afonso de Oliveira Garcia Mendes Ferreira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/11 Design and development of a two-phase closed loop thermosyphon for CPU cooling
Supervisor
Miguel Andrade Pereira Barata Moura (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/11 Study of the effects of wettability on pool boiling conditions in a quiescent medium
Supervisor
Tomás de Castro Barbosa de Sousa Vale (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015/11 Caracterização da resposta dinâmica de gotas de biofluidos sob atuação electrostática
Supervisor
Catarina Lopes D´ Oliveira Laurência (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015 New generation refrigerants for domestic heat pumps in Sweden
Thesis Member
Martina Longhini (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2015 Implementação e avaliação de desempenho de um sistema de aproveitamento da energia contida nos gases de escape de veículos automóveis
Thesis Member
Sérgio Miguel Vaz Pinheiro (Master)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2014/11 Estudo experimental para transporte de microgotas por actuação electroestática
Supervisor
Joana Anastácio Ramos (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2014 Biomimetic replicas – Transfer of complex architectures from plant surfaces onto polymeric materials
Thesis Member
Pedro Miguel Matos Pereira (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013/10 Experimental description of collisions between droplets of different miscible substances
Supervisor
Miguel Fernandes Martins (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013 Development of a dual-fuel burner
Thesis Member
António Perdigão Duarte Silva (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013 Chamas ancoradas em queimadores multiperfurados
Thesis Member
Eduardo Luís Rodrigues Neto Cordeiro (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2013 Modelo dinâmico de um esquentador
Thesis Member
João Tiago Corredeira Calejo Rodrigues (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2012 Determination of the primary air flow and isentropic efficiencies of the CFM56-3 engine
Thesis Member
Francisco Hoff Falcão de Campos (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2012 Caracterização experimental de uma bomba ejectora
Thesis Member
Nelson Jorge da Silva Capela (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2012 Estabilidade de chamas ancoradas em queimadores com furos do tupo circular e rectangular
Thesis Member
João Miguel Conclaves Gante Brás (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2011/11 Estudo dos fenómenos térmicos e hidrodinâmicos na interacção de gotas de líquidos com superfícies micro-estruturadas no contexto de uma aplicação a sistemas de arrefecimento
Supervisor
Tiago Miguel Serras Bica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Association member

Society Organization name Role
2023/11 - Current ASME Organização de eventos/conferências/revisão de artigos
2021/12/01 - Current SAE Revisora de artigos
2020/04/20 - Current Association of IFFS* (Institute of Fundamental and Frontier Sciences), a self-governing learned society and membership organization
2017/02 - Current Sociedade Portuguesa de Biomecânica Membro
2017/02 - Current INSTICC – Institute for Systems and Technologies of Information, Control and Communication Membro (na qualidade de organizadora e revisora para as conferencias BIOSTEC E BIODEVICES)
2015/04 - Current ISBE - International Society of Bionic Engineering Membro (Board of Directors em 2015)
2010 - Current Membro do ILASS - Europe, a representante Europeia do ILASS - Institute for Liquid Atomization and Spray Systems Membro - Editora da Newsletter

Committee member

Activity description
Role
Institution / Organization
2023/11/24 - Current Membro do Conselho Consultivo no Âmbito do Protocolo de Colaboração Academia Militar - Técnico Assunto:
Member
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/09 - Current Editorial Board (Guest Editor) SI Atomization and Sprays
Member
Begell House Inc, United States
2023 - Current Editora (Guest Editor) da Aerospace (MDPI) – SI: Heat transfer and cooling systems for aerospace equipment
Member
MDPI AG, Switzerland
2022/08/24 - Current Editora (Editorial Board) do Journal of Experimental and Theoretical Analyses, MDPI https://www.mdpi.com/journal/jeta/editors
Member
2022/08/20 - Current Editorial Board da Experimental Thermal and Fluid Science, Elsevier
Member
2022 - Current Editorial Board Heat Transfer Journal
Member
2021/04/01 - 2022/02/01 Membro do Tanasawa Award Selection Committee from ICLASS International 2021 http://ilasseurope.org/awards/tanasawa-award/
2018 - 2019 Membro do Tanasawa Award Selection Committee from ICLASS International http://ilasseurope.org/awards/tanasawa-award/
Member

Conference scientific committee

Conference name Conference host
2023/12/04 - Current 7th asme micro/nanoscale heat and mass transfer international conference Nottingham UK
2023/11/12 - Current 19th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES2024 Rome
2023/11/01 - Current BIODEVICES 2023: 16th International Conference on Biomedical Electronics and Devices Lsiboa, Portugal
2023/06/01 - Current Scientific Committee of the 23rd European Meeting on Liquid Atomization and Spray Systems Naples, Italy
2022/10/01 - Current 17th Conference on Sustainable Development of Energy, Water and Environment Systems 2022 Chipre
2020/01/01 - Current 13th International Joint Conference on Biomedical Engineering Systems and Technologies, Biodevices 2020 Valletta, Malta
2019/07/01 - Current 29th European Conference on Liquid Atomization and Spray Systems ILASS 2019 Paris Paris, França
2019/05/03 - Current SAE 14th International Conference on Engines & Vehicles CNR, Italia
2021/06/01 - 2021/09/01 8th European Thermal Sciences Conference EUROTHERM Online event
2021/03/01 - 2021/05/31 ATE-HEFAT 2021 – 15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics Online streaming
2020/12/01 - 2021/01/08 14th International Conference on Biomedical Electronics and Devices, Online streaming, 11-13 Fevereiro 2021 Online streaming
2020/01/13 - 2020/07/16 20th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics Lisboa, Portugal
2018/11 - 2019/02/24 12th International Conference on Biomedical Electronics and Devices Praga, Republica Checa
2018/01 - 2018/07/19 19th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics Lisboa, Portugal
2018/05 - 2018/06/26 ICLASS 2018, 14th Triennial International Conference on Liquid Atomization and Spray Systems, Chicago, IL Chicago, Estados Unidos
2017/10 - 2018/01/21 11th International Joint Conference on Biomedical Engineering Systems and Technologies Funchal, Madeira, Portugal
2017/01 - 2017/09/08 28th European Conference on Liquid Atomization and Spray Systems ILASS Valencia 2017 Valencia, Espanha
2017 - 2017/06/15 9th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, ExHFT-9 Foz do Iguaçu, Brasil
2016 - 2016/09/07 27th Annual Conference on Liquid Atomization and Spray Systems, ILASS 2016 Brighton, Reino Unido
2016/01 - 2016/07/07 18th International Symposium on Applications of Laser and Imaging Techniques to Fluid Mechanics Lisboa, Portugal
2016 - 2016/06/23 7th European Thermal-Sciences Conference, Eurotherm 2016 Krakow, Polónia
2015 - 2015/07/23 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT 2015 Kruger National Park, South Africa
2014 - 2014/09/10 26th Annual Conference on Liquid Atomization and Spray Systems – ILASS 2014 Bremen, Alemanha
2014 - 2014/07/16 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics – HEFAT 2014 Orlando, Florida, Estados Unidos
2014/01 - 2014/07/10 17th International Symposium on Laser Techniques Applied to Fluid Mechanics Lisboa, Portugal
2013 - 2013/09/04 24th Annual Conference on Liquid Atomization and Spray Systems – ILASS 2013 Chania, Grécia
2013 - 2013/06/20 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics - ExHFT-8 Lisboa, Portugal
2012 - 2012/09/07 6th European Thermal Science Conference, Eurotherm 2012 Poitiers, France
2012 - 2012/09/06 12th International Conference on Liquid Atomization and Spray Systems - ICLASS 2012 Heidelberg, Alemanha
2012/01 - 2012/07/12 16th International Symposium on Laser Techniques Applied to Fluid Mechanics Lisboa, Portugal
2011 - 2011/09/07 24th Annual Conference on Liquid Atomization and Spray Systems - ILASS-2011 Estoril, Portugal
2010 - 2010/09/08 23rd Annual Conference on Liquid Atomization and Spray Systems - ILASS 2010 Brno , Republica Checa
2010/01 - 2010/07/08 15th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal Lisboa, Portugal
2008/01 - 2008/07/10 14th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal Lisboa, Portugal
2006/01 - 2006/06/29 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal Lisboa, Portugal

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2023/09/11 - Current Aerodinâmica I Engenharia Aeroespacial (Licenciatura) Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/09/11 - Current Microfluidica e nanofluidos Engenharia Mecânica (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/04 - Current Mecânica dos Fluidos II Engenharia Mecânica (Licenciatura) Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/04 - Current Complementos de Transmissão de Calor Engenharia Mecânica (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/02 - Current Termodinâmica I Engenharia Mecânica (Licenciatura) Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/02 - Current Termodinâmica I Engenharia Aeroespacial (Licenciatura) Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/02 - Current Termodinâmica I Engenharia de Construção Naval (Licenciatura) Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/02 - Current Termodinâmica I Ciências de Engenharia - Engenharia do Ambiente (Licenciatura) Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/03/03 - Current Projeto Integrador em Engenharia Mecânica Militar Licenciatura em Engenharia Mecânica Militar
2020/10/08 - Current Mecânica dos Fluidos I Engenharia Mecânica Militar (Mestrado integrado) Academia Militar - Campus da Amadora, Portugal
2020/10/08 - Current Termodinâmica II Engenharia Mecânica Militar (Mestrado integrado) Academia Militar - Campus da Amadora, Portugal
2020/02/26 - Current Mecânica dos Fluidos II Engenharia Mecânica Militar (Mestrado integrado) Instituto Universitário Militar, Portugal
2020/02/26 - Current Termodinâmica I Engenharia Mecânica Militar (Mestrado integrado) Instituto Universitário Militar, Portugal
2019/10/30 - 2019/11/05 Curso de pós graduação: SEM5949 intitulado “Soluções microfluídicas para melhorar o desempenho de sistemas de conversão de energia”, curso de 15h lecionado na Faculdade de Engenharia de São Carlos, na Universidade de S. Paulo no Brasil. Fui a responsável pela organização completa do curso, desde o programa, ao material para leccionamento e avaliação. Soluções microfluídicas para melhorar o desempenho de sistemas de conversão de energia (Postgraduate Certificate) Universidade de São Paulo Escola de Engenharia de São Carlos, Brazil
2018/09 - 2019/02 Seminários em Sistemas Sustentáveis de Energia Sistemas Sustentáveis de Energia (Doutoramento) Universidade de Lisboa Instituto Superior Técnico, Portugal
2017/09 - 2018/01 Métodos Experimentais em Energia e Ambiente Engenharia Mecânica (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/02 - 2016/08 Termodinâmica I Engenharia Mecânica (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/02 - 2016/08 Termodinâmica I Engenharia do Ambiente (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/02 - 2016/08 Termodinâmica I Engenharia Naval e Oceânica (Licenciatura) Universidade de Lisboa Instituto Superior Técnico, Portugal
2016/02 - 2016/08 Termodinâmica I Engenharia Aeroespacial (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2014/02 - 2014/08 Termodinâmica I Engenharia Mecânica (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2014/02 - 2014/08 Termodinâmica I Engenharia do Ambiente (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2014/02 - 2014/08 Termodinâmica I Engenharia Naval e Oceânica (Licenciatura) Universidade de Lisboa Instituto Superior Técnico, Portugal
2014/02 - 2014/08 Termodinâmica I Engenharia Aeroespacial (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2013/02 - 2013/08 Termodinâmica I Engenharia Mecânica (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2013/02 - 2013/08 Termodinâmica I Engenharia do Ambiente (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2013/02 - 2013/08 Termodinâmica I Engenharia Aeroespacial (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2013/02 - 2013/08 Termodinâmica I Engenharia Naval e Oceânica (Licenciatura) Universidade de Lisboa Instituto Superior Técnico, Portugal
2011/02 - 2011/08 Transferência de Energia e Massa Engenharia do Ambiente (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2008/02 - 2008/07 Integrated Energy Systems MIT Portugal - EDAM – Engineering Design and Advanced Manufacturing (Especialização pós-licenciatura) Universidade do Minho - Campus de Azurém, Portugal
2007/09 - 2008/01 Métodos Experimentais em Energia e Ambiente Engenharia Mecânica (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2004/09 - 2005/01 Métodos Experimentais em Energia e Ambiente Engenharia Mecânica (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2003/09 - 2004/01 Métodos Experimentais em Energia e Ambiente Engenharia Mecânica (Doutoramento) Universidade de Lisboa Instituto Superior Técnico, Portugal
2001/09 - 2002/01 Transmissão de Calor Engenharia Mecânica (Mestrado integrado) Universidade de Lisboa Instituto Superior Técnico, Portugal

Interview (tv / radio show)

Program Topic
2020/04/28 - Current 90 segundos de Ciência

Journal scientific committee

Journal title (ISSN) Publisher
2023/11/11 - Current Physics of Fluids (1089-7666) AIP Advances
2023/10/27 - Current International Journal of Multiphase Flow (1879-3533) Elsevier
2023/01/01 - Current Heat Transfer Journal (2688-4542) Willey
2022/11/29 - Current Aerospace (2226-4310) MDPI
2022/03/01 - Current European Journal of Mechanics - B/Fluids ( 1873-7390) Elsevier
2021/02/28 - Current Journal of cleaner prodution elsevier
2021/01/01 - Current Guided Open Access, eJournalPress eJournalPress
2020/12/01 - Current Fluids MDPI
2020/05/05 - Current Propulsion and Power Research (2212-540X) Elsevier
2020/04/27 - Current Molecules MDPI
2020/04/20 - Current Colloids and Surfaces A: Physicochemical and Engineering Aspects Elsevier
2020/01/25 - Current Appied Sciences MDPI
2020/01/13 - Current Applied Sciences
2020/01/03 - Current Advanced Optical Technologies (2192-8584) Walter de Gruyter GmbH
2019/12/01 - Current Entropy (1099-4300) MDPI AG
2019/12/01 - Current Flow Turbulence and Combustion (1573-1987) Springer-Verlag
2019/12/01 - Current Heat Transfer Engineering (1521-0537) Informa UK (Taylor & Francis)
2019/12/01 - Current Industrial & Engineering Chemistry Research (1520-5045) American Chemical Society
2019/12/01 - Current Symmetry
2019/12 - Current International Communications in Heat and Mass Transfer (0735-1933) Elsevier
2019/12 - Current Flow, Turbulence and Combustion Elsevier
2019/11/01 - Current European Journal of Mechanics - B/Fluids (0997-7546) Elsevier
2019/11/01 - Current Thermal Science and Engineering Progress (2451-9049) Elsevier
2019/05/06 - Current Heat Transfer-Asian Research (1523-1496) Wiley (John Wiley & Sons)
2019/05 - Current Journal of Thermal Spray Technology (1059-9630) Springer-Verlag
2019/03/19 - Current Optics & Laser Technology (0030-3992) Elsevier
2019/03 - Current Chemical Engineering & Technology Wiley
2019/02 - Current Nanomaterials (2079-4991) MDPI AG
2019/01 - Current Entropy (1099-4300) MDPI AG
2019/01 - Current Energies (1996-1073) MDPI AG
2018/12 - Current Applied Energy (0306-2619) Elsevier
2018/04 - Current Coatings (2079-6412) MDPI AG
2018/02 - Current Chemical Engineering and Processing - Process Intensification (0255-2701) Elsevier
2018 - Current International Journal of Heat and Fluid Flow (0142-727X) Elsevier
2018 - Current Inventions (2411-5134) MDPI AG
2018 - Current Journal of Thermal Analysis and Calorimetry (1572-8943) Springer-Verlag
2018 - Current Journal of Food Engineering (0260-8774) Elsevier
2018 - Current Nuclear Science and Techniques (2210-3147) Springer-Verlag
2018 - Current Recent Patents on Engineering (1872-2121) Bentham Science
2018 - Current Thermal Science and Engineering Progress (2451-9049) Elsevier
2017 - Current Journal of Bionic Engineering (2543-2141) Springer-Verlag
2017 - Current Mechanical Systems and Signal Processing (1096-1216) Elsevier
2017 - Current Micron (0968-4328) Elsevier
2017 - Current Recent Innovations in Chemical Engineering (Formerly Recent Patents on Chemical Engineering) (2405-5204) Bentham Science
2017 - Current Sensors and Actuators A Physical (0924-4247) Elsevier
2016 - Current Scientific Reports (2045-2322) Springer Nature
2016 - Current Scientia Iranica (1026-3098) Elsevier
2016 - Current Soft Matter (1744-6848) The Royal Society of Chemistry
2015 - Current AIChE Journal (1547-5905) Wiley (John Wiley & Sons)
2015 - Current International Journal of Heat and Mass Transfer (0017-9310) Elsevier
2015 - Current Journal of Micromechanics and Microengineering (1361-6439) IOP Publishing
2015 - Current Journal of the Brazilian Society of Mechanical Sciences and Engineering (1678-5878) Springer-Verlag
2015 - Current Journal of Physics Condensed Matter (1361-648X) IOP Publishing
2015 - Current Journal of Propulsion and Power (1533-3876) American Institute of Aeronautics and Astronautics
2014/12 - Current Applied Surface Science (0169-4332) Elsevier
2014/10 - Current Annals of Nuclear Energy
2014 - Current Applied Thermal Engineering (1359-4311) Elsevier
2014 - Current Journal of Computational Design and Engineering (2288-4300) Elsevier
2014 - Current Surface Topography Metrology and Properties (2051-672X) IOP Publishing
2013 - Current Biotechnology, Agronomy, Society and Environment Editorial Board (BASE) Open Access Scholarly Publishers Association
2013 - Current Measurement Science and Technology (1361-6501) IOP Publishing
2013 - Current Physical Chemistry Chemical Physics (1463-9084) The Royal Society of Chemistry
2012/05 - Current Chemical Engineering Science (0009-2509) Elsevier
2012 - Current Intelligent Automation & Soft Computing (2326-005X) TSI Press
2012 - Current The Chemical Industry and Chemical Engineering Quarterly Association of the Chemical Engineers of Serbia
2012 - Current Experimental Thermal and Fluid Science (0894-1777) Elsevier
2012 - Current Fuel Processing Technology (0378-3820) Elsevier
2012 - Current International Journal of Thermal Sciences (1290-0729) Elsevier
2011 - Current Langmuir (1520-5827) American Chemical Society
2011 - Current Nanoscale (2040-3372) The Royal Society of Chemistry
2010 - Current Atomization and Sprays (1044-5110) Begell House Inc.
2009/12 - Current Advances in Mechanical Engineering (1687-8140) SAGE Publications
2009 - Current Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles (1953-8189) EDP Sciences
2007 - Current Experiments in Fluids (1432-1114) Springer-Verlag

Other jury / evaluation

Activity description Institution / Organization
2023/12 - Current Reviewer of Projects for ANID – Agencia Nacional de Investigación y Desarollo, Chile Agencia Nacional de Investigación y Desarollo, Chile
2023/09/04 - Current Reviewer of projects for NATO - DIANA Programme in the area of Energy Resiliance NATO, Belgium
2023/09 - Current External reviewer from PhD Student Giacomo Cinieri, Ph.D. Program in Engineering of Complex Systems, University of Salento Università del Salento, Italy
2022/07 - Current Projects reviewer for FAPESP – Fundação de Amparo à Pesquisa do Estado de S. Paulo, Brasil Fundação de Amparo à Pesquisa do Estado de São Paulo, Brazil
2021/07/01 - Current Projects reviewer for Agence Nationale de la Recherche Agence nationale de la recherche, France
2021/07/01 - Current Projects reviewer for the National Research Foundation of South Africa National Research Foundation of South Africa , South Africa
2020/11/01 - Current Projects reviewer for King Fahd University of Petroleum and Minerals
2020/02/21 - Current Projects reviewer for ESA - European Spacial Agency European Space Agency, France
2018/01/27 - Current Vogal (Relatora – External Examiner) de Doutoramento em Engenharia Mecânica, na Faculty of Engineering, Built Environment and Information Technology – University of Pretoria, South Africa, do candidato: Abubakar Bashir Título da dissertação: “Single-phase forced and mixed convection in the laminar and transitional flow regimes of inclined smooth tubes with inlet disturbances”. University of Pretoria, South Africa
2015/01 - Current Revisor Externo (External Reviewer) nas provas de Master of Engineering (Mechanical Engineering) do candidato F.A. Mulock-Houwer. Título da dissertação: “The effect of adjacent tubes on diabatic friction factors in the transitional flow regime” University of Pretoria, South Africa
2015 - Current Projects reviewr for EPSCR -Engineering and Physical Sciences Research Council, UK EPSCR – Engineering and Physical Sciences Research Council, UK, United Kingdom
2012 - Current Projects reviewer Executive Agency for Higher Education, Research, Development and Innovation Funding - Uefiscdi (Roménia) Main reporter for final reports since 2013 Unitatea Executiva pentru Finantarea Invatamantului Superior a Cercetarii Dezvoltarii si Inovarii, Romania
2023/06/01 - 2023/10/02 Evaluation Panel For FCT- Fundação para a Ciência e a Tecnologia PhD Fellowships in the Scientific Area of Mechanical Engineering Fundação para a Ciência e a Tecnologia, Portugal
Distinctions

Award

2023 Prémios Científicos/Scientific Awards Universidade de Lisboa/Caixa Geral de Depósitos, Edition 2023 - Honorouble Mention in the Scientific Area of Environment and Energy
Caixa Geral de Depositos, Portugal

Universidade de Lisboa, Portugal
2020 Excellent Member of ISBE, International Society of Bionic Engineering. Award distinguishing the scientific contributes to expand the international dissemination of ISBE
ISBE - International Society of Bionic Engineering, China

Other distinction

2013 Norman Chigier Award for Reviewing Excellence
2010 Prémios Jovens Investigadores UTL/Deloitte 2010 - 1st Prize in the Scientific Area of Mechanical Engineering
2009 Prémios Jovens Investigadores UTL/Deloitte 2009 - Honorable Mention in the Scientific Area of Mechanical Engineering