???global.info.a_carregar???
Lino Manuel Serra Maia completed a PhD in civil engineering in 2011 at the Faculty of Engineering of the University of Porto (FEUP) and a degree in civil engineering in 2005 also at FEUP. He is currently an Assistant Researcher at FEUP, belonging to the research unit CONSTRUCT - Institute of Structural and Construction R&D. His main research interests are: sustainability and circular economy in construction, new construction materials, efficient and smart construction, self-compacting concrete, high-performance concrete, geopolymer concrete, low carbon concrete, recycled concrete, CDW, incorporation of by-products in construction, concrete structures, concrete durability, construction with 3D printing, artificial intelligence in construction, automation and digitalization of construction.
Read full resume ↓
Identification

Personal identification

Full name
Lino Manuel Serra Maia

Citation names

  • Maia, Lino

Author identifiers

Ciência ID
B711-823E-18C5
ORCID iD
0000-0002-6371-0179
AuthenticusID
R-000-97W
Researcher Id
J-6354-2013
Scopus Author Id
37051068400

Email addresses

  • linomaia@fe.up.pt (Professional)

Telephones

Mobile phone
  • 966096541 (Personal)
Telephone
  • 220413749 (Professional)

Knowledge fields

  • Engineering and Technology - Civil Engineering
  • Engineering and Technology - Civil Engineering - Civil Engineering
  • Engineering and Technology - Civil Engineering - Construction Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Spanish; Castilian Intermediate (B1) Intermediate (B1) Intermediate (B1) Intermediate (B1)
French Beginner (A1) Beginner (A1) Beginner (A1) Beginner (A1)
Education
Degree Classification
2015/09/15 - 2017/07/10
Attended
 Direito (Licenciatura)
Universidade do Porto Faculdade de Direito, Portugal
2005/06/12 - 2011/07/22
Concluded
 Doctoral Program in Civil Engineering (Doutoramento)
Major in Concrete technology: Design-Based Concrete to Enhance Early-Age Properties
Universidade do Porto Faculdade de Engenharia, Portugal
"DESIGN-BASED CONCRETE TO ENHANCE EARLY-AGE PROPERTIES" (THESIS/DISSERTATION)
 Approved with distinction
2000/09/17 - 2005/07/27
Concluded
 Degree in Civil Engineering (Licenciatura)
Major in Civil Engineering: Structures
Universidade do Porto Faculdade de Engenharia, Portugal
"Degree in Civil Engineering" (THESIS/DISSERTATION)
 16 (0 to 20)
Affiliation

Science

Category
Host institution 		Employer
2019/09/13 - Current Contracted Researcher (Research) Universidade do Porto Faculdade de Engenharia, Portugal
CONSTRUCT – Instituto de I&D de Estruturas e Construção, Portugal

Teaching in Higher Education

Category
Host institution 		Employer
2011/09/01 - 2018/08/31 Assistant Professor (University Teacher) Universidade da Madeira Faculdade de Ciências Exatas e da Engenharia, Portugal
Universidade da Madeira, Portugal
2013 - 2018 Assistant Professor (University Teacher) Universidade da Madeira, Portugal
2013 - 2018 Assistant Professor (University Teacher) Universidade da Madeira, Portugal
2013 - 2018 Assistant Professor (University Teacher) Universidade da Madeira, Portugal
2013 - 2018 Assistant Professor (University Teacher) Universidade da Madeira, Portugal

Positions / Appointments

Category
Host institution 		Employer
2014 - 2016 Conselho científico/técnico-científico ou orgão correspondente Universidade da Madeira, Portugal
2014 - 2016 Conselho científico/técnico-científico ou orgão correspondente Universidade da Madeira, Portugal
2014 - 2016 Conselho científico/técnico-científico ou orgão correspondente Universidade da Madeira, Portugal
2014 - 2016 Conselho científico/técnico-científico ou orgão correspondente Universidade da Madeira, Portugal
2014 - 2016 Conselho científico/técnico-científico ou orgão correspondente Universidade da Madeira, Portugal
2014 - 2015 Conselho de gestão ou orgão correspondente Universidade da Madeira, Portugal
2014 - 2015 Conselho de gestão ou orgão correspondente Universidade da Madeira, Portugal
2014 - 2015 Conselho de gestão ou orgão correspondente Universidade da Madeira, Portugal
2014 - 2015 Conselho de gestão ou orgão correspondente Universidade da Madeira, Portugal
2014 - 2015 Conselho de gestão ou orgão correspondente Universidade da Madeira, Portugal

Others

Category
Host institution 		Employer
2018/09/01 - 2019/08/31 Pos-doc fellow Centro Tecnológico das Indústrias Têxtil e do Vestuário de Portugal, Portugal
Centro Tecnológico das Indústrias Têxtil e do Vestuário de Portugal, Portugal
2009/11/01 - 2011/08/01 Non-Executive Director Trofáguas – Serviços Ambientais, EEM, Portugal
2006/06/01 - 2011/05/31 PhD Student Universidade do Porto Faculdade de Engenharia, Portugal
Universidade do Porto Faculdade de Engenharia, Portugal
2005/11/01 - 2006/05/31 Preparer and consultancy work Grupo Martifer, Portugal
Projects

Contract

Designation Funders
2017/01/01 - 2019/12/31 NanoCompaC: Nanoengineered self-compacting mixes for improved cast in-place and early age performance. Multiscale characterization and experimental methodology
BIA2016-77911-R
Researcher
Instituto de Ciencias de la Construcción Eduardo Torroja, Spain
 Fundación Española para la Ciencia y la Tecnología
Concluded
2018/09/01 - 2019/08/31 Knit-Force para a ITV nacional
POCI-01-0246-FEDER-026757
Post-doc Fellow
Centro Tecnológico das Indústrias Têxtil e do Vestuário de Portugal, Portugal
 Agência Nacional de Inovação SA
Concluded
2014/09/01 - 2017/08/31 SCC pump: Caracterización y metodologías de Control de Calidad / Cast-in pumping of complex suspensions like self-compacting concrete (SCC): characterization and development of methodologies for quality control
BIA2013-48480-C2-0-R
Researcher
Instituto de Ciencias de la Construcción Eduardo Torroja, Spain
 Fundación Española para la Ciencia y la Tecnología
Concluded
2008/09/01 - 2010/08/31 BETOESCALA – Design-based concrete to enhance early age performance and durability – from nano to macro characterization
PTDC/ECM/70693/2006
PhD Student Fellow
Universidade do Porto Faculdade de Engenharia, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded

Other

Designation Funders
2015 - 2018/11/17 Towards the next generation of standards for service life of cement-based materials and structures
Cost Action: TU1404
Researcher
Universidade da Madeira, Portugal
Concluded
Outputs

Publications

Book chapter
  1. Manuel Jesus; Joana Costa; João Teixeira; Sofia Pessoa; Ana Sofia Guimarães; Bárbara Rangel; Luís Moreira; et al. "Use of Waste Materials to Reduce Cement and Natural Aggregates in 3D Printing Mortars". In Digital Innovations in Architecture, Engineering and Construction, edited by Bárbara Rangel; Ana Sofia Guimarães; Jorge Lino Alves; Leonardo Santana, 127-153. Portugal: Springer, Cham, 2023.
    Published • 10.1007/978-3-031-09319-7_6
  2. Nara Cangussu; Emanuel Silva; Rogério Borges; Lino Maia. Corresponding author: Lino Maia. "Fine Aggregates of CDW: Feasibility of Its Application in the Manufacture of Mortars for Laying". In Environmental Restoration. F-EIR 2021. Lecture Notes in Civil Engineering. Springer, edited by Deepankar Kumar Ashish; Jorge de Brito, 75-86. Cham, Switzerland: Springer, 2022.
    Published • 10.1007/978-3-030-96202-9_6
  3. Stéphanie Rocha; Joice Soares; Thâwanne Costa; Lino Maia. Corresponding author: Stéphanie Rocha. "Self-consolidating Concrete Produced with Fine CDW". In Environmental Restoration. F-EIR 2021. Lecture Notes in Civil Engineering. Springer, edited by Deepankar Kumar Ashish; Jorge de Brito, 63-74. Cham, Switzerland: Springer, 2022.
    Published • 10.1007/978-3-030-96202-9_5
  4. Filipe Figueiredo; Rayssa Renovato Reis; Lino Maia. Corresponding author: Lino Maia. "Physical and Mechanical Properties of Concrete Made with Glass Sand". In Environmental Restoration. F-EIR 2021. Lecture Notes in Civil Engineering. Springer, edited by Deepankar Kumar Ashish; Jorge de Brito, 19-31. Cham, Switzerland: Springer, 2022.
    Published • 10.1007/978-3-030-96202-9_2
  5. Stéphanie Rocha; Cássio Gonçalves; Lino Maia. Corresponding author: Stéphanie Rocha. "Cement After Expiry Date: Effect in the Concrete Properties". In Environmental Restoration. F-EIR 2021. Lecture Notes in Civil Engineering. Springer, edited by Deepankar Kumar Ashish; Jorge de Brito, 97-103. Cham, Switzerland: Springer, 2022.
    Published • 10.1007/978-3-030-96202-9_8
  6. Massoud Sofi; Lino Maia; Junli Liu; Ylias Sabri; Annie Zhou; Tawab Frahmand; Priyan Mendis. "Treated Municipal Solid Waste (Biomass) Based Concrete Properties—Part II: Experimental Program". 281-293. Springer International Publishing, 2021.
    10.1007/978-3-030-76543-9_26
  7. Massoud Sofi; Lino Maia; Junli Liu; Ylias Sabri; Zhiyuan Zhou; Tawab Frahmand; Priyan Mendis. "Treated Municipal Solid Waste (Biomass) Based Concrete Properties—Part I: State of the Art". 295-304. Springer International Publishing, 2021.
    10.1007/978-3-030-76543-9_27
  8. Massoud Sofi; Lino Maia; Elisa Lumantarna; Aocheng Zhong; Priyan Mendis. "Finite Element Modelling of Concentrated Anchorage Load in Early Age Concrete". 2021.
    10.1007/978-3-030-76547-7_24
  9. CANGUSSU, NARA; Lucas Versiani Martins; Maia, Lino. Corresponding author: Maia, Lino. "Exploratory Study About Rice Husk Ash as Partial Substitute of Cement in Concrete Applications". In 21st International Multidisciplinary Scientific Geoconference - SGEM 2021, edited by Prof. DSc. Oleksandr Trofymchuk, UKRAINE; Prof. Dr. hab. oec. Baiba Rivza, LATVIA, 359-366. Austria: STEF92 Technology, 2021.
    Published • 10.5593/sgem2021/6.1/s26.46
  10. Maia, L.; Azenha, M.; Faria, R.; Figueiras, J.. "Elasticity modulus monitoring through an ambient vibration response method - application to cement based pastes". In Nondestructive Testing of Materials and Structures, 453-458. Springer Science & Business Media, 2012.
    Published • 10.1007/978-94-007-0723-8_64
  11. Maia, Lino (B711-823E-18C5); Sandra Nunes; Joaquim Azevedo Figueiras. "Influence of paste content on shrinkage and creep of SCC". In Creep, Shrinkage and Durability Mechanics of Concrete and Concrete Structures, 675-680. Japan: CRC Press, 2008.
    Published
Conference abstract
  1. Mendonça, Fernanda Calado; Maia, Lino. Corresponding author: Maia, Lino. "Natural hydraulic mortars for rehabilitation of historic buildings: review of the state of the art". Paper presented in Xth ReUSO Documentation, Restoration and Reuse of Heritage., Porto, 2022.
    Published
  2. Mendonça, Fernanda Calado; Maia, Lino. Corresponding author: Maia, Lino. "Review on the application of ceramic residues in mortars". Paper presented in Xth ReUSO Documentation, Restoration and Reuse of Heritage., Porto, 2022.
    Published
  3. Mendonça, Fernanda Calado; Maia, Lino. Corresponding author: Maia, Lino. "Natural hydraulic mortars for rehabilitation of historic buildings: review of the state of the art". Paper presented in Xth ReUSO Edition Documentation, Restoration and Reuse of Heritage, Porto, 2022.
    Published
  4. Mendonça, Fernanda Calado; Maia, Lino. Corresponding author: Maia, Lino. "Review on the application of ceramic residues in mortars". Paper presented in Xth ReUSO Edition Documentation, Restoration and Reuse of Heritage, Porto, 2022.
    Published
  5. Cássio A. Gonçalves; Stéphanie O. N. Rocha; Nara M. O. Cangussu; Maia, Lino. "Análise das propriedades do concreto de cimento Portland utilizado após a data de validade". Paper presented in III EngMatCon - Congresso Online de Engenharia de Materiais, 2021.
  6. Ana Thereza Carvalho; Daniel Machado; Maia, Lino; José Santos. Corresponding author: Ana Thereza Carvalho. "Advantages of using of BIM methodology in civil construction". Paper presented in Book of Abstracts of the Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, Porto, 2021.
    Published
  7. Daniel Machado; Ana Thereza Carvalho; Maia, Lino; José Santos. Corresponding author: Daniel Machado. "Uses and benefits of BIM in construction management". Paper presented in Book of Abstracts of the Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, Porto, 2021.
    Published
  8. Daniel Machado; Stéphanie O. N. Rocha; Álvaro Júnior; José Santos; Maia, Lino. Corresponding author: Daniel Machado. "Characterization of concrete blocks commercialized in the city of Montes Claros". Paper presented in Book of Abstracts of the Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, Porto, 2021.
    Published
  9. Marina Krauze Thomaz; Denis Alcides Rezende; Maia, Lino. Corresponding author: Marina Krauze Thomaz. "Project: E-Waste projects, strategies and public services and relation with strategic digital city". Paper presented in Book of Abstracts of the Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, Porto, 2021.
    Published
  10. Filipe Figueiredo; Eriton Botero; Maia, Lino. Corresponding author: Filipe Figueiredo. "Treatment of cassava starch bagasse for use as pozzolan in cementitious materials". Paper presented in Book of Abstracts of the Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, Porto, 2021.
    Published
  11. Stéphanie O. N. Rocha; Ises da Silva; Izael Junior; Maia, Lino. Corresponding author: Stéphanie O. N. Rocha. "Application of silica fume in cored concrete blocks". Paper presented in Book of Abstracts of the Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, Porto, 2021.
    Published
  12. Ana Thereza Carvalho; Maia, Lino; José Santos. "BIM as a tool for Facility Management". Paper presented in Book of Abstracts of the Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, Porto, 2021.
    Published
  13. Stéphanie O. N. Rocha; Jessé Lima; Pedro Quintino; Daniel Machado; Maia, Lino. Corresponding author: Stéphanie O. N. Rocha. "Evaluation of concrete pavers using plastic as fine aggregate". Paper presented in Book of Abstracts of the Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, Porto, 2021.
    Published
  14. João Teixeira; Rui Neto; Cecília Schaefer; Jorge Lino; Bárbara Rangel; Maia, Lino; Sandra Nunes. Corresponding author: João Teixeira. "Development of an extruder for laboratory testing of 3D printing mortars". Paper presented in Book of Abstracts of the Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, Porto, 2021.
    Published
  15. Nara Cangussu; Pollyana Ramos; Tulio Tolentino; Stéphanie O. N. Rocha; Maia, Lino. Corresponding author: Nara Cangussu. "Concrete with coarse aggregates partially replaced by recycled construction and demolition waste". Paper presented in Book of Abstracts of the Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, Porto, 2021.
    Published
  16. João Teixeira; Cecília Schaefer; Maia, Lino; Bárbara Rangel; Jorge Lino; Rui Neto. Corresponding author: João Teixeira. "Workability control in the development of 3D printing cementitious mortars - laboratory methodology". Paper presented in Book of Abstracts of the Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, Porto, 2021.
    Published
  17. Nara Cangussu; Leandro Silva; Stéphanie O. N. Rocha; Maia, Lino. Corresponding author: Nara Cangussu. "Incorporation of the Sludge of Sewage Treatment Plant on Ceramic Bricks Manufacture". Paper presented in Book of Abstracts of the Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, Porto, 2021.
    Published
  18. Stéphanie O. N. Rocha; Joice Soares; Thâwanne Costa; Maia, Lino. Corresponding author: Stéphanie O. N. Rocha. "Self-Consolidating Concrete Produced with Fine CDW". Paper presented in Volume of Abstracts of The F-EIR Conference 2021 on Environment Concerns and its Remediation, Chandigarh, 2021.
    Published
  19. Nara Cangussu; Emanuel Silva; Rogério Borge; Maia, Lino. Corresponding author: Nara Cangussu. "Fine Aggregates of CDW: Feasibility of Its Application in the Manufacture of Mortars for Laying". Paper presented in Volume of Abstracts of The F-EIR Conference 2021 on Environment Concerns and its Remediation, Chandigarh, 2021.
    Published
  20. Filipe Figueiredo; Rayssa Renovato Reis; Maia, Lino. Corresponding author: Filipe Figueiredo. "Physical and Mechanical Properties of Concrete Made with Glass Sand". Paper presented in Volume of Abstracts of The F-EIR Conference 2021 on Environment Concerns and its Remediation, Chandigarh, 2021.
    Published
  21. Stéphanie O. N. Rocha; Cássio Gonçalves; Maia, Lino. Corresponding author: Stéphanie O. N. Rocha. "Cement After Expiry Date: Effect in the Concrete Properties". Paper presented in Volume of Abstracts of The F-EIR Conference 2021 on Environment Concerns and its Remediation, Chandigarh, 2021.
    Published
  22. Nara Cangussu; Luana Vasconcelos; Maia, Lino. Corresponding author: Nara Cangussu. "Environmental Benefits of Using the Sewage Sludge in the Production of Ceramic Bricks". Paper presented in olume of Abstracts of The F-EIR Conference 2021 on Environment Concerns and its Remediation, Chandigarh, 2021.
    Published
  23. Nara Cangussu; Patrícia Chaves; Welis da Rocha; Maia, Lino. Corresponding author: Nara Cangussu. "Particleboard Panels Made with Sugarcane Bagasse Waste—An Exploratory Study". Paper presented in Volume of Abstracts of The F-EIR Conference 2021 on Environment Concerns and its Remediation, Chandigarh, 2021.
    Published
  24. Maia, Lino. "Consequences of steel corrosion on concrete elements wherein reinforcement is unnecessary". Paper presented in ICSI1 ¿ International Conference on Structural Integrity, Funchal, 2015.
    Published
  25. Maia, Lino; José Celestino Gomes; Miguel Guimarães. "Design of coloured self-compacting concrete made with crushed volcanic aggregates". Paper presented in IRF’S 2013 – 4th International Conference on Integrity, Reliability and Failure, Funchal, 2013.
    Published
  26. Maia, Lino; Cátia Caetano; Miguel Correia. "Influence of the specimen mold in the concrete compressive strength test". Paper presented in IRF’S 2013 – 4th International Conference on Integrity, Reliability and Failure, Funchal, 2013.
    Published
  27. Maia, Lino; Cátia Caetano; Miguel Correia; José Manuel Martins Neto dos Santos. "Modulus of elasticity of concrete produced with basaltic aggregates". Paper presented in IRF’S 2013 – 4th International Conference on Integrity, Reliability and Failure, Funchal, 2013.
    Published
Conference paper
  1. Sebastião Ventura; Maia, Lino. Corresponding author: Sebastião Ventura. "Durability of concrete with alkali-activated materials, a short literature review". Paper presented in WASTES: Solutions, Treatments and Opportunities, Coimbra, 2023.
    Published • 10.1201/9781003345084-58
  2. Sebastião Ventura; Maia, Lino. Corresponding author: Sebastião Ventura. "Preparation and use of slag from the incineration of municipal solid waste as a partial substitute for portland cement". Paper presented in 6th International Conference WASTES: Solutions, Treatments and Opportunities, Coimbra, 2023.
    Published
  3. Ana Mafalda Matos; Maia, Lino; Joana Sousa-Coutinho. Corresponding author: Ana Mafalda Matos. "Valorização de resíduo de quartzo em betão branco arquitetónico: estudo ao nível da argamassa". Paper presented in 6as Jornadas Portuguesas de Engenharia de Estruturas (JPEE), Lisboa, 2022.
    Published
  4. Maia, Lino. Corresponding author: Maia, Lino. "Response models in experimental studies of fresh properties of cement pastes: Part I – typical approach through changes one-variable-at-a-time". Paper presented in International Conference on Mathematical Analysis and Applications in Science and Engineering - ICMA2SC’22, Porto, 2022.
    Published • 10.34630/20734
  5. Maia, Lino. Corresponding author: Maia, Lino. "Response models in experimental studies of fresh properties of cement pastes: Part II – statistical approach based in a central composite design". Paper presented in International Conference on Mathematical Analysis and Applications in Science and Engineering - ICMA2SC¿22, Porto, 2022.
    Published
  6. CANGUSSU, NARA; Ana Mafalda Matos; Maia, Lino. Corresponding author: Maia, Lino. "Comparison of response models from full, fractionated and small central composite design of experiments in cement-based mortars". Paper presented in International Conference on Mathematical Analysis and Applications in Science and Engineering - ICMA2SC¿22, Porto, 2022.
    Published
  7. CANGUSSU, NARA; Ana Mafalda Matos; Maia, Lino. Corresponding author: Maia, Lino. "Numerical modeling and optimization of self-compacting mortars: central composite design approach with". Paper presented in International Conference on Mathematical Analysis and Applications in Science and Engineering - ICMA2SC¿22, Porto, 2022.
    Published
  8. CANGUSSU, NARA; Leandro Silva; Stéphanie Rocha; Maia, Lino. Corresponding author: CANGUSSU, NARA. "Incorporation of the Sludge of Sewage Treatment Plant on Ceramic Bricks Manufacture". Paper presented in 4th Doctoral Congress in Engineering – DCE21 / Symposium on Civil Engineering and Spatial Planning, Porto, 2021.
    Published
  9. João Teixeira; Cecília Schaefer; Maia, Lino; Bárbara Rangel; Jorge Lino; Rui Neto. Corresponding author: João Teixeira. "Workability control in the development of 3D printing cementitious mortars - laboratory methodology". Paper presented in 4th Doctoral Congress in Engineering – DCE21 / Symposium on Civil Engineering and Spatial Planning, Porto, 2021.
    Published
  10. Stéphanie Rocha; Jesse Lima; Pedro Quintino; Daniel Machado; Maia, Lino. Corresponding author: Stéphanie Rocha. "Evaluation of concrete pavers using plastic as fine aggregate". Paper presented in 4th Doctoral Congress in Engineering – DCE21 / Symposium on Civil Engineering and Spatial Planning, Porto, 2021.
    Published
  11. Ana Thereza Carvalho; Maia, Lino; José Santos. Corresponding author: Ana Thereza Carvalho. "BIM as a tool for Facility Management". Paper presented in 4th Doctoral Congress in Engineering ¿ DCE21 / Symposium on Civil Engineering and Spatial Planning, Porto, 2021.
    Published
  12. Stéphanie Rocha; Ises da Silva; Izael Junior; Maia, Lino. Corresponding author: Stéphanie Rocha. "Application of silica fume in cored concrete blocks". Paper presented in 4th Doctoral Congress in Engineering ¿ DCE21 / Symposium on Civil Engineering and Spatial Planning, Porto, 2021.
    Published
  13. Daniel Machado; Ana Thereza Carvalho; Maia, Lino; José Santos. Corresponding author: Daniel Machado. "Uses and benefits of BIM in construction management". Paper presented in 4th Doctoral Congress in Engineering ¿ DCE21 / Symposium on Civil Engineering and Spatial Planning, Porto, 2021.
    Published
  14. Ana Thereza Carvalho; Daniel Machado; Maia, Lino; José Santos. Corresponding author: Ana Thereza Carvalho. "Advantages of using of BIM methodology in civil construction". Paper presented in 4th Doctoral Congress in Engineering ¿ DCE21 / Symposium on Civil Engineering and Spatial Planning, Porto, 2021.
    Published
  15. CANGUSSU, NARA; Pollyana Ramos; Tulio Tolentino; Stéphanie Rocha; Maia, Lino. Corresponding author: CANGUSSU, NARA. "Concrete with coarse aggregates partially replaced by recycled construction and demolition waste". Paper presented in 4th Doctoral Congress in Engineering ¿ DCE21 / Symposium on Civil Engineering and Spatial Planning, Porto, 2021.
    Published
  16. Maia, Lino. "ESTUDO COMPARATIVO DE FUNDAÇÕES PARA UM EDIFÍCIO MODELO EM JOÃO PESSOA/PB: SAPATA X ESTACA HÉLICE CONTÍNUA". 2021.
    10.47094/ijonne.2021.9
  17. Maia, Lino. "MANIFESTAÇÕES PATOLÓGICAS EM EDIFICAÇÕES COM PAREDES DE CONCRETO ARMADO: ESTUDO DE CASO EM OBRA NA CIDADE DE JOÃO PESSOA – PB". 2021.
    10.47094/ijonne.2021.8
  18. Maia, Lino; José Santos. "Resistência mecânica de painéis compósitos de betão leve aligeirado com granulado de EPS (in Portuguese)". Paper presented in Encontro Nacional Betão Estrutural 2016, Coimbra, 2016.
    Published
  19. Maia, Lino; Diana Neves; Miguel Guimarães. "Betão Autocompactável na Região Autónoma da Madeira: da Composição de Laboratório à Comercialização (in Portuguese)". Paper presented in bac2015 - IV Congresso Ibérico, Betão Auto-compactável, Porto, 2015.
    Published
  20. Andreia Macedo; Maia, Lino. "Economic evaluation of ventilated façades solutions for residential buildings". Paper presented in 8th AECEF 2015 Symposium - Association of European Civil Engineering Faculties, Porto, 2015.
    Published
  21. Maia, Lino; Pedro Mêda; João G. Freitas. "Metodologia BIM, uma nova abordagem – caso prático de criação de elementos estruturais (in Portuguese)". Paper presented in Atas das 5as Jornadas Portuguesas de Engenharia de Estruturas - Encontro Nacional Betão Estrutural 2014 - 9º Congresso Nacional de Sismologia e Engenharia Sísmica, Lisboa, 2014.
    Published
  22. Maia, Lino; Cátia Caetano; Miguel Correia. "Influência dos moldes dos provetes no ensaio de resistência à compressão do betão (in Portuguese)". Paper presented in Encontro Nacional Betão Estrutural 2012, Porto, 2012.
    Published
  23. José Celestino Gomes; Joana Silva; Miguel Guimarães; Maia, Lino. "Dimensionamento de betões autocompactáveis coloridos com agregados britados vulcânicos (in Portuguese)". Paper presented in Encontro Nacional Betão Estrutural 2012, Porto, 2012.
    Published
  24. Joana Silva; José Celestino Gomes; Miguel Guimarães; Maia, Lino. "Betão Autocompactável de elevado efeito estético (in Portugese)". Paper presented in Encontro Nacional Betão Estrutural 2012, Porto, 2012.
    Published
  25. Cátia Caetano; Maia, Lino; Luís Hilário; Miguel Correira. "Módulo de elasticidade em betões com agregados basálticos (in Portuguese)". Paper presented in Encontro Nacional Betão Estrutural 2012, Porto, 2012.
    Published
  26. Maia, Lino; Helena Figueiras; Sandra Nunes; Joaquim Azevedo Figueiras. "Deformações do betão nas primeiras idades. Retração e fluência (in Portuguese)". Paper presented in Seminário Betão dimensionado para melhorar o desempenho nas primeiras idades e durabilidade. Betão Autocompactável, Porto, 2011.
    Published
  27. Helena Figueiras; Maia, Lino; Sandra Nunes; Joana Sousa Coutinho; Joaquim Azevedo Figueiras. "Durabilidade do betão. Composições e verificação do desempenho (in Portugese)". Paper presented in Seminário Betão dimensionado para melhorar o desempenho nas primeiras idades e durabilidade. Betão Autocompactável, Porto, 2011.
    Published
  28. Sandra Nunes; Cláudia Lemos; Maia, Lino; Helena Figueiras; Joana Sousa Coutinho; Joaquim Azevedo Figueiras. "Dimensionamento de betão branco para aplicação em ambiente marítimo (in Portuguese)". Paper presented in Actas do Seminário Betão dimensionado para melhorar o desempenho nas primeiras idades e durabilidade. Betão Autocompactável., Porto, 2011.
    Published
  29. Maia, Lino; Joaquim Azevedo Figueiras. "Influence of the stress level on the deformation of a high strength self compacting concrete loaded at early ages". Paper presented in 9th International Symposium on High Performance Concrete – Design, Verification & Utilization, Rotorua, 2011.
    Published
  30. Maia, Lino; Joaquim Azevedo Figueiras. "Deformação de um BAC de elevada resistência inicial com aplicação de cargas nas primeiras idades (in Portuguese)". Paper presented in Encontro Nacional Betão Estrutural 2010, Lisboa, 2010.
    Published
  31. Sandra Nunes; Maia, Lino; Helena Figueiras; Joana Sousa Coutinho; Joaquim Azevedo Figueiras. "Optimização de um betão auto compactável branco de elevada durabilidade (in Portuguese)". Paper presented in Encontro Nacional Betão Estrutural 2010, Lisboa, 2010.
    Published
  32. Maia, Lino; Joaquim Azevedo Figueiras. "Deformation of high strength self-compacting concrete for early age loading". Paper presented in SCC2010: 6th International RILEM Symposium on Self-Compacting Concrete – 4th North American Conference on the Design and Use of SCC, Montreal, 2010.
    Published
  33. Sandra Nunes; Helena Figueiras; Maia, Lino; Joana Sousa Coutinho; Joaquim Azevedo Figueiras. "Tailor made white SCC". Paper presented in 6th International RILEM Symposium on Self-Compacting Concrete – 4th North American Conference on the Design and Use of SCC, Montreal, 2010.
    Published
  34. Maia, Lino; Helena Figueiras; Sandra Nunes; Joaquim Azevedo Figueiras. "Avaliação do estado fresco, retracção e calor de hidratação de argamassas para BAC branco com metacaulino (in Portuguese)". Paper presented in bac2010 - 2º Congresso Ibérico, Betão Auto-compactável, Guimarães, 2010.
    Published
  35. Helena Figueiras; Maia, Lino; Sandra Nunes; Joana Sousa Coutinho; Joaquim Azevedo Figueiras. "Optimização de uma argamassa destinada a BAC de elevada durabilidade (in Portuguese)". Paper presented in bac2010 - 2º Congresso Ibérico, Betão Auto-compactável, Guimarães, 2010.
    Published
  36. Maia, Lino; Sandra Nunes; Joaquim Azevedo Figueiras. "Influência do conteúdo em pasta nas propriedades de betões autocompactáveis (in Portuguese)". Paper presented in Encontro Nacional Betão Estrutural 2008, Guimarães, 2008.
    Published
  37. Maia, Lino; Mette Rica Geiker; Joaquim Azevedo Figueiras. "Hydration of Portuguese cements, measurement and modelling of chemical shrinkage". Paper presented in CCC2008: Challenges for Civil Construction, Porto, 2008.
    Published
Conference poster
  1. Stéphanie O. N. Rocha; Cássio Gonçalves; Maia, Lino. Corresponding author: Stéphanie O. N. Rocha. "Cement After Expiry Date: Effect in the Concrete Properties". Paper presented in The F-EIR Conference 2021 on Environment Concerns and its Remediation, 2021.
  2. Filipe Figueiredo; Rayssa Renovato Reis; Maia, Lino. Corresponding author: Filipe Figueiredo. "Physical and Mechanical Properties of Concrete Made with Glass Sand". Paper presented in The F-EIR Conference 2021 on Environment Concerns and its Remediation, 2021.
  3. Nara Cangussu; Emanuel Silva; Rogério Borge; Maia, Lino. Corresponding author: Nara Cangussu. "Fine Aggregates of CDW: Feasibility of Its Application in the Manufacture of Mortars for Laying". Paper presented in The F-EIR Conference 2021 on Environment Concerns and its Remediation, 2021.
  4. Stéphanie O. N. Rocha; Joice Soares; Thâwanne Costa; Maia, Lino. Corresponding author: Stéphanie O. N. Rocha. "Self-Consolidating Concrete Produced with Fine CDW". Paper presented in The F-EIR Conference 2021 on Environment Concerns and its Remediation, 2021.
  5. Nara Cangussu; Pollyana Ramos; Tulio Tolentino; Stéphanie Rocha; Maia, Lino. Corresponding author: Nara Cangussu. "Concrete with coarse aggregates partially replaced by recycled construction and demolition waste". Paper presented in Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, 2021.
  6. João Teixeira; Rui Neto; Cecília Schaefer; Jorge Lino; Bárbara Rangel; Maia, Lino; Sandra Nunes. Corresponding author: João Teixeira. "Development of an extruder for laboratory testing of 3D printing mortars". Paper presented in Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, 2021.
  7. Stéphanie Rocha; Jessé Lima; Pedro Quintino; Daniel Machado; Maia, Lino. Corresponding author: Stéphanie Rocha. "Evaluation of concrete pavers using plastic as fine aggregate". Paper presented in Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, 2021.
  8. Ana Thereza Carvalho; Maia, Lino; José Santos. Corresponding author: Ana Thereza Carvalho. "BIM as a tool for Facility Management". Paper presented in Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, 2021.
  9. Stéphanie Rocha; Ises da Silva; Izael Junior; Maia, Lino. Corresponding author: Stéphanie Rocha. "Application of silica fume in cored concrete blocks". Paper presented in Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, 2021.
  10. Filipe Figueiredo; Eriton Botero; Maia, Lino. Corresponding author: Filipe Figueiredo. "Treatment of cassava starch bagasse for use as pozzolan in cementitious materials". Paper presented in Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, 2021.
  11. Marina Krauze Thomaz; Denis Alcides Rezende; Maia, Lino. Corresponding author: Marina Krauze Thomaz. "Project: E-Waste projects, strategies and public services and relation with strategic digital city". Paper presented in Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, 2021.
  12. Daniel Machado; Stéphanie Rocha; Álvaro Júnior; José Santos; Maia, Lino. Corresponding author: Daniel Machado. "Characterization of concrete blocks commercialized in the city of Montes Claros". Paper presented in Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, 2021.
  13. Daniel Machado; Ana Thereza Carvalho; Maia, Lino; José Santos. Corresponding author: Daniel Machado. "Uses and benefits of BIM in construction management". Paper presented in Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, 2021.
  14. Ana Thereza Carvalho; Daniel Machado; Maia, Lino; José Santos. "Advantages of using of BIM methodology in civil construction". Paper presented in Symposium on Civil Engineering and Spatial Planning within the 4th Doctoral Congress in Engineering – DCE21, 2021.
  15. Nara Cangussu; Patrícia Chaves; Welis da Rocha; Maia, Lino. Corresponding author: Maia, Lino. "Particleboard Panels Made with Sugarcane Bagasse Waste—An Exploratory Study". Paper presented in The F-EIR Conference 2021 on Environment Concerns and its Remediation, 2021.
  16. Nara Cangussu; Luana Vasconcelos; Maia, Lino. Corresponding author: Nara Cangussu. "Environmental Benefits of Using the Sewage Sludge in the Production of Ceramic Bricks". Paper presented in The F-EIR Conference 2021 on Environment Concerns and its Remediation, 2021.
  17. Maia, Lino; José Celestino Gomes; Miguel Guimarães. "Design of coloured self-compacting concrete made with crushed volcanic aggregates". Paper presented in IRF’S 2013 – 4th International Conference on Integrity, Reliability and Failure, 2013.
  18. Maia, Lino; Cátia Caetano; Miguel Correia; José Manuel Martins Neto dos Santos. "Modulus of elasticity of concrete produced with basaltic aggregates". Paper presented in IRF’S 2013 – 4th International Conference on Integrity, Reliability and Failure, 2013.
  19. Maia, Lino; Cátia Caetano; Miguel Correia. "Influência dos moldes dos provetes no ensaio de resistência à compressão do betão (in Portuguese)". Paper presented in Encontro Nacional Betão Estrutural 2012, 2012.
  20. José Celestino Gomes; Joana Silva; Miguel Guimarães; Maia, Lino. "Dimensionamento de betões autocompactáveis coloridos com agregados britados vulcânicos (in Portuguese)". Paper presented in Encontro Nacional Betão Estrutural 2012, 2012.
  21. Cátia Caetano; Maia, Lino; Luís Hilário; Miguel Correia. "Módulo de elasticidade em betões com agregados basálticos (in Portuguese)". Paper presented in Encontro Nacional Betão Estrutural 2012, 2012.
Journal article
  1. Amanda Barros; Eva Barreira; Lino Maia; Maria Lurdes Lopes. Corresponding author: Eva Barreira. "Incorporation of Waste in Thermal Mortars—A Literature Review". Buildings 14 830 (2024): 1-31. https://doi.org/10.3390/buildings14030830.
    Open access • Published • 10.3390/buildings14030830
  2. Sebastião Ventura; Maia, Lino. Corresponding author: Sebastião Ventura. "Durability in Materials Obtained by Alkaline Activation, A Review on the State of the Arte Focused on Municipal Solid Waste Incineration Slags – MSWIS". Engineering and Applied Sciences Technology 6 3 (2024): 1-13.
    Open access • Published • 10.47363/JEAST/2024(6)227
  3. Sebastião Ventura; Lino Maia. Corresponding author: Sebastião Ventura. "Durability of concrete with alkali-activated materials: a short literature review". U.Porto Journal of Engineering 9 5 (2023): 1-11. https://doi.org/10.24840/2183-6493_009-005_002195.
    Open access • Published • 10.24840/2183-6493_009-005_002195
  4. Mendonça, Fernanda Calado; Neto, Alcebíades Silva de Carvalho; Da Silva, Cleiton Alexandre Costa; Maia, Lino. Corresponding author: Mendonça, Fernanda Calado. "Proposal for the Expansion of the Light Rail Vehicle Network". Civil Engineering Journal 9 10 (2023): 2568-2577. http://dx.doi.org/10.28991/cej-2023-09-10-014.
    Open access • Published • 10.28991/cej-2023-09-10-014
  5. Stéphanie Oliveira Nina Rocha; Lino Maia. Corresponding author: Stéphanie Oliveira Nina Rocha. "Optimization techniques for mortars with self-compacting characteristics through Central Composite Design". U.Porto Journal of Engineering 9 4 (2023): 184-209. https://doi.org/10.24840/2183-6493_009-004_002166.
    Open access • Published • 10.24840/2183-6493_009-004_002166
  6. Stéphanie Rocha; Guilherme Ascensão; Lino Maia. "Exploring Design Optimization of Self-Compacting Mortars with Response Surface Methodology". Applied Sciences 13 18 (2023): 10428-10428. http://dx.doi.org/10.3390/app131810428.
    Open access • Published • 10.3390/app131810428
  7. Nara Cangussu; Ana Mafalda Matos; Paula Milheiro-Oliveira; Lino Maia. Corresponding author: Lino Maia. "Modelling and Predicting Self-Compacting High Early Age Strength Mortars Properties: Comparison of Response Models from Full, Fractioned and Small Central Composite Designs". Applied Sciences 13 14 (2023): 1-17. https://doi.org/10.3390/app13148413.
    Open access • Published • 10.3390/app13148413
  8. Sebastião Ventura; Maia, Lino. Corresponding author: Sebastião Ventura. "Durability in alkaline-activated materials a review on the state of the art". TECER 16 30 (2023): 1-28. https://www.metodista.br/revistas/revistas-izabela/index.php/tec/article/view/2491.
    Open access • Published
  9. Ana Mafalda Matos; Lino Maia; Joana Sousa Coutinho. "Quartz Powder Valorisation in White Self-Compacting Concrete: Mortar Level Study". Applied Sciences 13 13 (2023): 1-21. https://doi.org/10.3390/app13137652.
    Open access • Published • 10.3390/app13137652
  10. Esperança Akihito Boa; Bernardo Jésena; Maia, Lino. Corresponding author: Maia, Lino. "Evaluation of recycled gravel in the concrete mixture for the surface layer of rigid flooring". Global Journal of Ecology 8 1 (2023): 46-52. https://doi.org/10.17352/gje.000081.
    Open access • Published • 10.17352/gje.000081
  11. Lino Maia. Corresponding author: Lino Maia. "Evaluation of the Fresh Properties of Cement Pastes: Part I—Response Models Applied to Changes in the One-Variable-at-a-Time Method". Materials 16 11 (2023): 1-16. https://doi.org/10.3390/ma16114139.
    Open access • Published • 10.3390/ma16114139
  12. Ana Thereza Carvalho; Rui Calejo; José Santos; Lino Maia. "BIM model to support O&M tasks". Journal of Information Technology in Construction (2023): https://doi.org/10.36680/j.itcon.2023.016.
    10.36680/j.itcon.2023.016
  13. Lino Maia. "Solid and homogeneous thermal wall of cored lightweight concrete blocks solidarized in situ". Recent Patents on Engineering 18 (2023): 1-13. https://doi.org/10.2174/1872212118666230503151757.
    Open access • Published • 10.2174/1872212118666230503151757
  14. Nara Cangussu; Maria Luiza C. Vieira; Lino Maia. "Environmental Analysis of the Incorporation of Sugarcane Bagasse in Medium Density Particleboard Panels through Life Cycle Assessment". Recycling (2023): https://doi.org/10.3390/recycling8020044.
    10.3390/recycling8020044
  15. João Teixeira; Cecília Ogliari Schaefer; Bárbara Rangel; Lino Maia; Jorge Lino Alves. Corresponding author: João Teixeira. "A road map to find in 3D printing a new design plasticity for construction – The state of art". Frontiers of Architectural Research 12 2 (2023): 337-360. https://doi.org/10.1016/j.foar.2022.10.001.
    Open access • Published • 10.1016/j.foar.2022.10.001
  16. Nara Cangussu; Ana Mafalda Matos; Paula Milheiro-Oliveira; Lino Maia. Corresponding author: Ana Mafalda Matos. "Numerical Design and Optimisation of Self-Compacting High Early-Strength Cement-Based Mortars". Applied Sciences 13 7 (2023): 4142-4143. https://doi.org/10.3390/app13074142.
    Open access • Published • 10.3390/app13074142
  17. Sebastião Ventura; Maia, Lino. Corresponding author: Sebastião Ventura. "A bibliographic review of concrete obtained by alkaline activation and the specific case of the municipal solid waste incineration slag". TECER 15 29 (2023): 1-30. https://www.metodista.br/revistas/revistas-izabela/index.php/tec/article/view/2474/1313.
    Open access • Published
  18. Mendonça, Fernanda Calado; Cavalcante, Karla Priscilla Ventura; Maia, Lino. Corresponding author: Mendonça, Fernanda Calado. "Pathological Manifestations in Buildings with Reinforced Concrete Walls: Case Study in The City of João Pessoa - PB". Journal of Engineering Research 3 3 (2023): 1-13. http://dx.doi.org/10.22533/at.ed.317332305014.
    Open access • Published • 10.22533/at.ed.317332305014
  19. Rocha, Stéphanie; Jesse Lima; Pedro Quintino; Luana Vasconcelos; Maia, Lino. Corresponding author: Rocha, Stéphanie. "Valuation of Plastic Waste as Fine Aggregate in Concrete Pavers". Advancements in Civil Engineering & Technology 5 3 (2022): 1-6. http://dx.doi.org/10.31031/acet.2022.05.000611.
    Open access • Published • 10.31031/acet.2022.05.000611
  20. CANGUSSU, NARA; Erick Andrade; Pablo Soares; Maia, Lino. Corresponding author: CANGUSSU, NARA. "Ecological Brick Manufactured with Addition of Ceramic Waste". Lecture Notes in Civil Engineering 277 (2022): 461-470. https://link.springer.com/chapter/10.1007/978-981-19-4040-8_68.
    Open access • Published • 10.1007/978-981-19-4040-8_36
  21. CANGUSSU, NARA; Gabriel Braga; Maia, Lino. Corresponding author: CANGUSSU, NARA. "Replacement of Natural Aggregate by Glass Waste in Granilite Concrete". Lecture Notes in Civil Engineering 277 (2022): 849-860. https://link.springer.com/chapter/10.1007/978-981-19-4040-8_68.
    Open access • Published • 10.1007/978-981-19-4040-8_68
  22. Mendonça, Fernanda Calado; Felipe Brasileiro Barbosa; Maia, Lino. Corresponding author: Mendonça, Fernanda Calado. "Comparative analysis of the execution between conventional and self-leveling screed: Case study in a vertical condominium in Campina Grande - PB". Research & Development in Material Science 17 4 (2022): 1985-1991. https://crimsonpublishers.com/rdms/pdf/RDMS.000917.pdf.
    Open access • Published • 10.31031/RDMS.2022.17.000917
  23. Stéphanie Rocha; Pedro Soares; Lino Maia. Corresponding author: Lino Maia. "Briquettes from sludge in sewage treatment plant: calorific power". Environmental Science and Pollution Research (2022): 1-9. https://doi.org/10.1007/s11356-022-22239-x.
    Published • 10.1007/s11356-022-22239-x
  24. Nara Cangussu; Leandro Silva; Lino Maia. "Incorporation of the Sludge of Sewage Treatment Plant on Ceramic Bricks Manufacture". U.Porto Journal of Engineering 8 2 (2022): 10-19. https://doi.org/10.24840/2183-6493_008.002_0002.
    Open access • Published • 10.24840/2183-6493_008.002_0002
  25. Filipe Figueiredo; Camila Couto; Eriton Botero; Nathalia Figueiredo; Maia, Lino. Corresponding author: Filipe Figueiredo. "Produção de piso intertravado de concreto (pavers) com substituição parcial do agregado miúdo pelo grits, resíduo da indústria de papel e celulose / Production of concrete blocks floor with partial replacement of the finne aggregate by grits, a waste from the paper and pulp industry". Brazilian Journal of Development 8 4 (2022): 31339-31351. https://www.brazilianjournals.com/index.php/BRJD/article/view/47153.
    Open access • Published • 0.34117/bjdv8n4-560
  26. João Teixeira; Cecília Ogliari Schaefer; Lino Maia; Bárbara Rangel; Rui Neto; Jorge Lino Alves. Corresponding author: João Teixeira. "Influence of Supplementary Cementitious Materials on Fresh Properties of 3D Printable Materials". Sustainability 14 7 (2022): 3970-3970. https://doi.org/10.3390/su14073970.
    Open access • Published • 10.3390/su14073970
  27. Nara Cangussu; Isabela Costa; Álvaro Carvalho Júnior; Marise F. Silveira; Farhad Aslani; Lino Maia. Corresponding author: Nara Cangussu. "Influence of the preparation of the cylindrical specimen surface and approach analysis on the test value of compressive strength". Structural Concrete (2022): 1-15. https://doi.org/10.1002/suco.202100761.
    Published • 10.1002/suco.202100761
  28. Lino Maia. Corresponding author: Lino Maia. "Experimental dataset from a central composite design with two qualitative independent variables to develop high strength mortars with self-compacting properties". Data in Brief 40 107738 (2022): 1-8. https://doi.org/10.1016/j.dib.2021.107738.
    Open access • Published • 10.1016/j.dib.2021.107738
  29. FIGUEIREDO, FILIPE; Pamela da Silva; Eriton R. Botero; Lino Maia. Corresponding author: FIGUEIREDO, FILIPE. "Concrete with partial replacement of natural aggregate by PET aggregate—An exploratory study about the influence in the compressive strength". AIMS Materials Science 9 2 (2022): 172-183. http://dx.doi.org/10.3934/matersci.2022011.
    Open access • Published • 10.3934/matersci.2022011
  30. Nara Cangussu; Luana Vasconcelos; Maia, Lino. Corresponding author: Nara Cangussu. "Environmental benefits of using sewage sludge in the production of ceramic bricks". Environmental Science and Pollution Research (2022): 1-12. http://dx.doi.org/10.1007/s11356-022-18670-9.
    Published • 10.1007/s11356-022-18670-9
  31. Figueiredo, Filipe; Figueiredo, Gabriela; Botero, Eriton; Figueiredo, Nathalia; Maia, Lino. Corresponding author: Figueiredo, Filipe. "Analysis of Partial Substitution of Cement with Marble and Granite Powders in Concrete Production". ACI Materials Journal 119 6 (2022): 211-219. http://dx.doi.org/10.14359/51737196.
    Open access • Published • 10.14359/51737196
  32. Pedro Andrade; Santos, José (DE1C-64E5-4284); Maia, Lino. Corresponding author: Santos, José (DE1C-64E5-4284). "Numerical methods to predict human induced vibrations on low frequency stairs. Part 1: Literature review, modelling". Structures 34 (2021): 575-588. http://dx.doi.org/10.1016/j.istruc.2021.08.017.
    Published • 10.1016/j.istruc.2021.08.017
  33. Lino Maia. Corresponding author: Lino Maia. "Experimental dataset from a central composite design to develop mortars with self-compacting properties and high early age strength". Data in Brief 39 107563 (2021): 1-8. https://doi.org/10.1016/j.dib.2021.107563.
    Open access • Published • 10.1016/j.dib.2021.107563
  34. Felipe Bastos; Adeildo Cabral; Perboyre Alcântara; Maia, Lino. Corresponding author: Maia, Lino. "Study case about the production of masonry concrete blocks with CDW and kaolin mining waste". AIMS Materials Science 8 6 (2021): 990-1004. http://dx.doi.org/10.3934/matersci.2021060.
    Published • 10.3934/matersci.2021060
  35. Stéphanie Rocha; Cássio A. Gonçalves; Maia, Lino. "Cimento com prazo de validade vencido: efeito no slump test e na resistência do concreto / Cement with expired date: effect in the slump and in the compressive strength of the concrete". Brazilian Journal of Development (ISSN 2525-8761) 7 12 (2021): 117568-117582.
    Open access • Published • 10.34117/bjdv7n12-490
  36. Maia, Lino. "Análise dos impactos na construção civil frente à Pandemia da COVID-19/ Analysis of the impacts on civil construction in the face of the COVID-19 Pandemic". Brazilian Journal of Development 7 10 (2021): 101651-101665. http://dx.doi.org/10.34117/bjdv7n10-467.
    10.34117/bjdv7n10-467
  37. Nara Cangussu; Patrícia Chaves; Welis da Rocha; Lino Maia. Corresponding author: Lino Maia. "Particleboard panels made with sugarcane bagasse waste—an exploratory study". Environmental Science and Pollution Research (2021): https://doi.org/10.1007/s11356-021-16907-7.
    Published • 10.1007/s11356-021-16907-7
  38. J Teixeira; CO Schaefer; B Rangel; Jorge Lino Alves; Maia, Lino; Sandra Nunes; R Neto; ML Lopes. "Development of 3D printing sustainable mortars based on a bibliometric analysis". Part L: Journal of Materials: Design and Applications Special MDA2020 (2021): https://journals.sagepub.com/doi/10.1177/1464420721995210.
    Published • https://doi.org/10.1177/1464420721995210
  39. Maia, Lino. "Improvement of Staircases Vibration Serviceability to Human Ergonomics: A Case Study". Procedia Structural Integrity 28 (2020): 287-294. http://dx.doi.org/10.1016/j.prostr.2020.10.034.
    Open access • Published • 10.1016/j.prostr.2020.10.034
  40. Matos, Ana Mafalda; Maia, Lino; Nunes, Sandra; Milheiro-Oliveira, Paula. "Design of self-compacting high-performance concrete: Study of mortar phase". Construction and Building Materials 167 (2018): 617-630. http://dx.doi.org/10.1016/j.conbuildmat.2018.02.053.
    Published • 10.1016/j.conbuildmat.2018.02.053
  41. Aslani, Farhad; Maia, Lino; Santo, Jose. "Effect of specimen geometry and specimen preparation on the concrete compressive strength test". Structural Engineering and Mechanics 62 1 (2017): 97-106. http://dx.doi.org/10.12989/sem.2017.62.1.097.
    Published • 10.12989/sem.2017.62.1.097
  42. Maia, Lino; Alves, Sérgio. "Low durability of concrete elements due to steel corrosion – cases wherein the steel reinforcing bars acted as an internal clock bomb". Procedia Structural Integrity 5 (2017): 139-146. http://dx.doi.org/10.1016/j.prostr.2017.07.082.
    Published • 10.1016/j.prostr.2017.07.082
  43. Maia, Lino; Neves, Diana. "Developing a Commercial Self-Compacting Concrete Without Limestone Filler and With Volcanic Aggregate Materials". Procedia Structural Integrity 5 (2017): 147-154. http://dx.doi.org/10.1016/j.prostr.2017.07.085.
    Published • 10.1016/j.prostr.2017.07.085
  44. Andrade, Pedro; Santos, José; Maia, Lino. "Reinforcement Measures to Reduce the Human Induced Vibrations on Stair Steps – A Case Study". Procedia Structural Integrity 5 (2017): 1310-1317. http://dx.doi.org/10.1016/j.prostr.2017.07.138.
    Published • 10.1016/j.prostr.2017.07.138
  45. Maia, L.; Aslani, F.. "Modulus of elasticity of concretes produced with basaltic aggregate". Computers and Concrete 17 1 (2016): 129-140. http://www.scopus.com/inward/record.url?eid=2-s2.0-84960094881&partnerID=MN8TOARS.
    Published • 10.12989/cac.2016.17.1.129
  46. Maia, Lino; Mêda, Pedro; Freitas, João G.; Lino Maia; Pedro Mêda; João G. Freitas. "BIM Methodology, a New Approach - Case Study of Structural Elements Creation". Procedia Engineering 114 (2015): 816-823. http://dx.doi.org/10.1016/j.proeng.2015.08.032.
    10.1016/j.proeng.2015.08.032
  47. Aslani, F.; Maia, L.. "Creep and shrinkage of high-strength self-compacting concrete: Experimental and analytical analysis". Magazine of Concrete Research 65 17 (2013): 1044-1058. http://www.scopus.com/inward/record.url?eid=2-s2.0-84884402313&partnerID=MN8TOARS.
    Published • 10.1680/macr.13.00048
  48. Maia, L.; Figueiras, H.; Nunes, S.; Azenha, M.; Figueiras, J.. "Influence of shrinkage reducing admixtures on distinct SCC mix compositions". Construction and Building Materials 35 (2012): 304-312. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861163443&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2012.02.033
  49. Maia, L.; Azenha, M.; Faria, R.; Figueiras, J.. "Identification of the percolation threshold in cementitious pastes by monitoring the E-modulus evolution". Cement and Concrete Composites 34 6 (2012): 739-745. http://www.scopus.com/inward/record.url?eid=2-s2.0-84859911393&partnerID=MN8TOARS.
    10.1016/j.cemconcomp.2012.03.001
  50. Maia, L.; Figueiras, J.. "Early-age creep deformation of a high strength self-compacting concrete". Construction and Building Materials 34 (2012): 602-610. http://www.scopus.com/inward/record.url?eid=2-s2.0-84860806776&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2012.02.083
  51. Maia, L.; Azenha, M.; Geiker, M.; Figueiras, J.. "E-modulus evolution and its relation to solids formation of pastes from commercial cements". Cement and Concrete Research 42 7 (2012): 928-936. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861343029&partnerID=MN8TOARS.
    10.1016/j.cemconres.2012.03.013
  52. Maia, L.; Azenha, M.; Faria, R.; Figueiras, J.. "Influence of the cementitious paste composition on the E-modulus and heat of hydration evolutions". Cement and Concrete Research 41 8 (2011): 799-807. http://www.scopus.com/inward/record.url?eid=2-s2.0-79957548159&partnerID=MN8TOARS.
    10.1016/j.cemconres.2011.03.008
Thesis / Dissertation
  1. Maia, Lino. "Design-Based Concrete to Enhance Early-Age Properties". PhD, Universidade do Porto Faculdade de Engenharia, 2011.

Intellectual property

Patent
  1. Maia, Lino. 2021. "PAREDE TÉRMICA, MACIÇA E HOMOGÉNEA DE BLOCOS VAZADOS SOLIDARIZADOS IN SITU (Application Number: 116197)". Portugal.
    Granted/Issued
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2022/11/22 Review on the application of ceramic residues in mortars Xth ReUSO Documentation, Restoration and Reuse of Heritage.
FEUP (Porto, Portugal)
2022/11/03 Natural hydraulic mortars for rehabilitation of historic buildings: review of the state of the art Xth ReUSO Documentation, Restoration and Reuse of Heritage.
FEUP (Porto, Portugal)
2022/06/27 Response models in experimental studies of fresh properties of cement pastes: Part I – typical approach through changes one-variable-at-a-time International Conference on Mathematical Analysis and Applications in Science and Engineering - ICMA2SC’22
ISEP P.PORTO (Porto, Portugal)
2022/06/27 Comparison of response models from full, fractionated and small central composite design of experiments in cement-based mortars International Conference on Mathematical Analysis and Applications in Science and Engineering - ICMA2SC’22
ISEP P.PORTO (Porto, Portugal)
2022/06/27 Numerical modeling and optimization of self-compacting mortars: central composite design approach with International Conference on Mathematical Analysis and Applications in Science and Engineering - ICMA2SC’22
ISEP P.PORTO (Porto, Portugal)
2022/06/06 Response models in experimental studies of fresh properties of cement pastes: Part II – statistical approach based in a central composite design International Conference on Mathematical Analysis and Applications in Science and Engineering - ICMA2SC’22
ISEP P.PORTO (Porto, Portugal)
2021/08/28 Partial replacement of cement by rice husk ash in concrete applications: a contribution to increase the circular economy in the construction industry BIT’s 9 th Annual World Congress of Advanced Materials 2021’s
The Organizing Committee of WCAM-2021 (Dalian, China)
2021/08/21 Exploratory study about rice husk ash as partial substitute of cement in concrete applications XXIth International Multidisciplinary Scientific GeoConference – SGEM 2021
SGEM (Varna, Bulgaria)
2020/02/04 Presentation session of the CIÊNCIAVITAE curriculum management platform CIÊNCIAVITAE platform
Universidade do Porto Faculdade de Engenharia (Porto, Portugal)
2015/09/02 Steel corrosion on concrete elements wherein reinforcement was needless ICSI1 – International Conference on Structural Integrity
INEGI (Funchal, Portugal)
2015/09/02 BIM methodology, a new approach - study case of creation of structural elements ICSI1 – International Conference on Structural Integrity
INEGI (Funchal, Portugal)
2013/06/25 Influence of the specimen mold in the concrete compressive strength test IRF’S 2013 – 4th International Conference on Integrity, Reliability and Failure
INEGI (Funchal, Portugal)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2021/02/15 - 2024/04/11 Building materials: a contribution to a greener and smarter design and assessment
Supervisor of Nara Miranda de Oliveira Cangussu
 Programa Doutoral em Engenharia Civil (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal
2019 - 2019 O vidro na indústria da construção
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2018 - 2018 Micro captação de energia solar com coletores caseiros
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2017 - 2018 Remoção de amianto friável e não friável na Região Autónoma da Madeira
Co-supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2017 - 2017 Acabamentos interiores em edifícios de habitação - tinta de parede, ladrilho cerâmico e pedra natural
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2016 - 2016 Painéis compósitos de betão leve - comportamento estrutural
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2016 - 2016 Corrosão das armaduras não estruturais em elementos de betão armado.
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2016 - 2016 Lean e sua aplicabilidade na indústria da construção
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2016 - 2016 Caraterização térmica de tubos de explorações petrolíferas em águas profundas
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2016 - 2016 A madeira e seus derivados na indústria de construção - reabilitação de elementos de madeira
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2015 - 2015 Avaliação económica de soluções de fachadas ventiladas para edifícios de habitação
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2014 - 2014 Construção com painéis sanduíche de silicato de cálcio, cimento e EPS
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2014 - 2014 Metodologia BIM: uma nova abordagem, uma nova esperança
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2014 - 2014 Transport modelling: Macro and micro simulation for the studied case of Funchal
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2013 - 2014 Energias renováveis para águas quentes sanitárias
Supervisor
 Mestrado em Engenharia Civil (Master)
Universidade da Madeira, Portugal
2013 - 2013 Módulos de alojamento temporário : estado da arte e estudo de soluções
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2013 - 2013 Betão autocompactável na Região Autónoma da Madeira: da composição de laboratório à comercialização
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2013 - 2013 Dimensionamento sísmico de edifícios baixos em alvenaria confinada
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2012 - 2013 Dormitórios prefabricados para festivais de verão
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2012 - 2013 Alvenarias resistentes na Região Autónoma da Madeira
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2012 - 2013 Gestão de projectos – modelo para gestão e controlo de custos
Supervisor
 Engenharia Civil
Universidade da Madeira, Portugal
2012 - 2013 Metodologia de gestão integrada de prazos e custos – aplicação do earned value management numa obra
Co-supervisor
 Engenharia Civil (Master)
Universidade do Porto Faculdade de Engenharia, Portugal
2011 - 2012 Resistência à compressão em provetes cúbicos e cilíndricos e módulo de elasticidade em betões com agregados basálticos
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2011 - 2012 Dimensionamento de betões autocompactáveis coloridos com agregados britados vulcânicos
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal
2011 - 2012 Betão Autocompactável de elevado efeito estético
Supervisor
 Engenharia Civil (Master)
Universidade da Madeira, Portugal

Event participation

Activity description
Type of event 		Event name
Institution / Organization
2021/05/20 - 2021/05/20 Palestrante na II Semana de Atividades Extensionistas – Transformando Ideias em Oportunidades. Tema da palestra: Ciclo de Vida dos Materiais.
Other
 II Semana de Atividades Extensionistas – Transformando Ideias em Oportunidades
2020/03/10 - 2020/03/14 3RD RILEM spring convention 2020 ambitioning a sustainable future for built environment: comprehensive strategies for unprecedented challenges
Congress
 3RD RILEM spring convention 2020 ambitioning a sustainable future for built environment: comprehensive strategies for unprecedented challenges
Universidade do Minho, Portugal

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2024/04/11 Building materials: a contribution to a greener and smarter design and assessment
Supervisor
 Nara Miranda de Oliveira Cangussu (PhD)
Universidade do Porto Faculdade de Engenharia, Portugal

Other jury / evaluation

Activity description Institution / Organization
2021/09/01 - 2027/12/01 Avaliador da Agência Nacional Erasmus+ no período 2021-2027 Agência Nacional Erasmus, Portugal
Distinctions

Other distinction

2004 1st place in the DARTE contest of the National Meeting of Structural Concrete 2004