???global.info.a_carregar???
Braian Uribe (BU) is Materials Engineer from the Universidad de Antioquia, Colombia where he developed his undergraduate thesis on reinforcement fibres and polymer matrix composites at CIDEMAT- Centro de Innovación y Desarrollo de Materiales. In addition to the thesis, this work resulted in the publication of a paper in an international journal and the participation at an international conference. Braian Uribe holds a Ph.D. degree from the EESC/USP- Escola de Engenharia de São Carlos, Universidade de São Paulo, Brazil, in Materials Engineering with an emphasis on hierarchically reinforced high-performance polymer matrix composites (CNPq-140339/2015-9). During his doctoral stay, he carried out experimental and collaborative work with the CNPEM-Centro Nacional de Pesquisa em Energia e Materiais, Brazil, the INA- Instituto de Nanociencias de Aragón, Spain, the group of polymers and macromolecules of the EESC, among others, resulting in several articles for the area and the granting of a patent. BU integrated as a Ph.D. researcher the 25MM € Alchemy project coordinated by the Universidade Católica Portuguesa-Portugal and the company Amyris-USA, to develop polymers and composites from sugar cane derivatives (PT2020/POCI n.º 27578). This project resulted in developments such as a lignin-based hydrophobic coating with applications in the cosmetics and food industry, biocomposites from biomass, and a bioplastic film with UV-resistant properties. Based on this work, some articles were published, and the technological development was protected with an international patent. In Management positions, Braian Uribe led the applications division within the R+D+i area of the company Andercol, today AkzoNobel-Colombia, devoted to the development of innovative products and solutions in the areas of polymers, composites and paints. He also joined the company Padelius Industria-Portugal, dedicated to the development of sporting goods for the Padel market. Braian Uribe has experience in the development, application and analysis of composite materials manufactured by different technologies, among them: BMC, SMC, compression moulding, vacuum-assisted resin infusion, and RTM light. His experience is related to polymers and polymer composite materials extracted from both natural and fossil sources with a focus on different applications such as aerospace, building, transportation, furniture and other engineering topics. BU has worked with different materials such as woods, natural fibres, cellulose, synthetic fibres, polyester, vinyl ester, epoxy, acrylic resins and mineral fillers from the nano to the microscale with major relevance in the understanding of the structure-properties relationship. He has 12+ years of industrial and academic experience with emphasis on the design of experiments for product development (DoE), leadership of technical teams, application of methodologies for project management in the materials industry, reverse engineering, scientific approaches to the development of products and forensic analysis of polymer and polymer-composites. Recently, BU was granted a 6-year contract for the Institute for Polymers and Composites (IPC) as an Auxiliary Researcher in the context of the 2nd Edition of the Individual Call to Scientific Employment CEECINST/00018/2021/CP2806/CT0002, with DOI:https://doi.org/10.54499/CEECINST/00018/2021/CP2806/CT0002. Recently Braian Uribe is part of a strategic research line for both IPC and PIEP related to the understanding and development of high mechanical performance and recyclable polymer matrix composite materials based on reactive monomers and continuous fibres.
Read full resume ↓
Identification

Personal identification

Full name
Braian Buitrago Uribe

Citation names

  • Uribe, Braian
  • Uribe B.E.B.
  • Buitrago, Braian

Author identifiers

Ciência ID
B71B-2B98-8B4A
ORCID iD
0000-0002-7229-0874

Email addresses

  • brianes@gmail.com (Personal)

Addresses

  • Campus Universidade do Minho, Azurem, 4800-058, Guimarães, Guimarães, Portugal (Professional)

Knowledge fields

  • Engineering and Technology - Materials Engineering - Composites
  • Engineering and Technology - Materials Engineering - Materials Engineering
  • Engineering and Technology - Industrial Biotechnology - Bioplastics
  • Engineering and Technology - Industrial Biotechnology - Bio-derived Novel Materials
  • Engineering and Technology - Materials Engineering - Paper and Wood

Languages

Language Speaking Reading Writing Listening Peer-review
Spanish; Castilian (Mother tongue)
Portuguese Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Education
Degree Classification
2014/02/05 - 2017/07/06
Concluded
 PhD in Sciences - Materials Engineering (Doctor)
Major in Material Science and Engineering
Universidade de São Paulo Escola de Engenharia de São Carlos, Brazil
"Development and characterization of hierarchical polymer composite laminates CF-EPX and GF-EPX containing interfacial nanocellulose " (THESIS/DISSERTATION)
 Approved unanimously
2004/06/04 - 2011/03/18
Concluded
 Materials Engineering (Bachelor)
Major in Polymer composites
Universidad de Antioquía, Colombia
"Some properties of natural fibers (sisal, pineapple, and banana) in comparison to man-made technical fibers (aramide, glass, carbon)" (THESIS/DISSERTATION)
 A
Affiliation

Science

Category
Host institution 		Employer
2023/05/02 - Current Contracted Researcher (Research) Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
(...)
2020/10/05 - 2022/04/01 Contracted Researcher (Research) Universidade Católica Portuguesa Centro Regional do Porto, Portugal
Universidade Católica Portuguesa Centro Regional do Porto, Portugal
(...)
2015/07/05 - 2016/06/30 Researcher (Research) Universidade de São Paulo, Brazil
Universidade de São Paulo, Brazil
2012/02/14 - 2013/12/31 Researcher (Research) Servicio Nacional de Aprendizaje - Centro Tecnológico del Mobiliario., Colombia
Servicio Nacional de Aprendizaje - Centro Tecnológico del Mobiliario., Colombia

Others

Category
Host institution 		Employer
2022/04 - 2022/09 Innovation Head - Industry Padelius Lda, Portugal
2018/07/02 - 2020/09/05 Head of materials' application division R&D+i - Polymers and polymer composites Andercol SA, Colombia
Andercol SA, Colombia
2017/07/03 - 2018/06/02 Specialist in polymer composites - R&D+i Division Novapol, Brazil
Novapol, Brazil
2009/07 - 2009/12 Nondestructive Testing technician Joint and Welding Engineers, Colombia
Projects

Grant

Designation Funders
2014/03 - 2018 Hierarchical composite materials CFRP and GFRP containing interfacial nanocellulose
140339/2015-9
 Conselho Nacional de Desenvolvimento Científico e Tecnológico
2015 - 2016 Interphase analysis using atomic force microscopy
20681
PhD Student Fellow
Centro Nacional de Pesquisa em Energia e Materiais, Brazil

Universidade de São Paulo Câmpus de São Carlos, Brazil
Centro Nacional de Pesquisa em Energia e Materiais
Concluded

Contract

Designation Funders
2023/05 - Current FCT- CEEC Institucional - Investigador auxiliar
CEECINST/00018/2021/CP2806/CT0002
 Fundação para a Ciência e a Tecnologia
2023/01 - Current HI_MOV. Corredor Tecnológico Transfronterizo de Movilidad con Hidrógeno Renovable
0160_HI_MOV_1_E
Researcher
Pólo de Inovação em Engenharia de Polímeros, Portugal

Universidade do Minho Instituto de Polímeros e Compósitos, Portugal

Universidade do Minho - Campus de Azurém, Portugal
Ongoing
2020 - 2022 Alchemy
(PT2020/POCI n.º 27578
Researcher
Universidade Católica Portuguesa Escola Superior de Biotecnologia, Portugal
 Autoridade de Gestão do Programa Operacional Competitividade e Internacionalização
Ongoing
2019 - 2020 Development of cultured marble and solid surfaces for building market
ADC-benef/trib 016
Researcher
Andercol SA, Colombia
 Departamento Administrativo de Ciencia Tecnología e Innovación
Concluded
2018 - 2020 VOC-free emulsions for decorative architectural coatings
ADC-benef/trib 018
Technical development
Andercol SA, Colombia

Universidad Nacional de Colombia Medellín Sede Facultad de Minas, Colombia

Departamento Administrativo de Ciencia Tecnología e Innovación, Colombia
Andercol SA

Departamento Administrativo de Ciencia Tecnología e Innovación
2014 - 2017 Hierarchical carbon and glass Fiber composites containing nanocellulose as interfacial strengthener
140339/2015-9
PhD Student Fellow
Universidade de São Paulo Escola de Engenharia de São Carlos, Brazil
 Conselho Nacional de Desenvolvimento Científico e Tecnológico
Concluded
2015 - 2015 Interphase analysis using high resolution transmission electron microscopy
E/26
PhD Student Fellow
Universidad de Zaragoza, Spain

Universidade de São Paulo Câmpus de São Carlos, Brazil
Instituto de Nanociencia y Materiales de Aragón
Concluded
2010 - 2011 Comparative study on thermal and physical properties of industrial (aramid, carbon and glass) and natural (sisal, pineapple and banana) fibers
Sem conhecimento do codigo
Scientific Initiation Fellow
Universidad de Antioquía, Colombia
 CODI Universiad de Antioquia
Concluded

Other

Designation Funders
2019 - 2020 Unstaurated polyester resins for 3D printing applications
2018-05
Supervisor
Andercol SA, Colombia
 Andercol SA
Concluded
2018 - 2018 study of the different variables affecting the curing behavior and maturation of SMC pastes.
2017-NOV/010
Supervisor
Universidade Federal do Espírito Santo, Brazil
 Novapol

Universidade Federal do Espírito Santo
Concluded
2017 - 2018 NovaBio
2017-NOV/005
Principal investigator
Novapol, Brazil
 Novapol
Concluded
2017 - 2018 Lightweight Sheet Molding Compound
2017-NOV/014
Principal investigator
Novapol, Brazil
 Novapol
Concluded
2013/01 - 2013/12 Characterization of three wood species (Oak, Teak and Chanul) before and after heat treatment
2013CTM/00012
Principal investigator
Servicio Nacional de Aprendizaje - Centro Tecnológico del Mobiliario., Colombia
 Servicio Nacional de Aprendizaje - Centro Tecnológico del Mobiliario.

Gobierno de Colombia
Concluded
2012 - 2012 Particle boards made from wood sawdust and other industrial waste (TAR)
2012/CTM00001
Principal investigator
Servicio Nacional de Aprendizaje - Centro Tecnológico del Mobiliario., Colombia
 Servicio Nacional de Aprendizaje - Centro Tecnológico del Mobiliario.

Gobierno de Colombia
Concluded
Outputs

Publications

Conference paper
  1. Capeto, Paula; Uribe, Braian; Guimarães, Ana Sofia; Oliveira, Ana. "Utilization of ß-farnesene distillation and evaporation residues for the production of green polyol and its subsequent conversion to polyurethane foams". 2021.
  2. AZEVEDO, I. T; GIACOMIN, I. F. J; URIBE, B. E. B; BARCELLOS, T. B; CARREIRA, L. G; GUIMARÃES, D. "ESTUDO PARA REDUÇÃO DA DENSIDADE RELATIVA DE COMPÓSITOS DO TIPO SMC CLASSE A". Paper presented in XXII Congresso Brasileiro de Engenharia Química, 2018.
    10.5151/cobeq2018-pt.0819
Conference poster
  1. AZEVEDO, I. T; GIACOMIN, I. F. J; URIBE, B. E. B; BARCELLOS, T. B; CARREIRA, L. G; GUIMARÃES, D. "Influência da concentração de componentes na viscosidade da pasta matriz de materiais compósitos Sheet Molding Compound". Paper presented in 15 Congresso Brasileiro de Polímeros (15 CBPOL), 2019.
Journal article
  1. Braian Uribe; Joana Rodrigues; Pedro Costa; Maria C. Paiva. "Application of Sound Waves During the Curing of an Acrylic Resin and Its Composites Based on Short Carbon Fibers and Carbon Nanofibers". Materials (2024): https://doi.org/10.3390/ma17215369.
    10.3390/ma17215369
  2. Uribe B.E.B.. "Application of sound waves during the curing of an acrylic resin and its composites based on short carbon fibers and carbon nanofibers". Materials (2024):
    Under revision
  3. Ana Paula Capêto; Manuel Jesus; Braian E. B. Uribe; Ana Sofia Guimarães; Ana L. S. Oliveira. "Building a Greener Future: Advancing Concrete Production Sustainability and the Thermal Properties of 3D-Printed Mortars". Buildings (2024): https://doi.org/10.3390/buildings14051323.
    10.3390/buildings14051323
  4. Ana Paula Capeto; Braian Buitrago Uribe; Manuela Pintado; Ana Sofia Guimarães; Ana Lúcia Silva Oliveira. "Synthesis of thermoset elastomer from microbial oil derived from the fermentation of sugarcane". Journal of Applied Polymer Science (2023): http://dx.doi.org/10.1002/app.55065.
    10.1002/app.55065
  5. Capêto, Ana Paula; Amorim, Manuela; Sousa, Sérgio; Costa, Joana R.; Uribe, Braian; Guimarães, Ana Sofia; Pintado, Manuela; Oliveira, Ana L. S.. "Fire-Resistant Bio-based Polyurethane Foams Designed with Two By-Products Derived from Sugarcane Fermentation Process". Waste and Biomass Valorization (2023): http://dx.doi.org/10.1007/s12649-023-02274-6.
    10.1007/s12649-023-02274-6
  6. Uribe, Braian E.B.; Soares-Pozzi, Alessandra C.; Tarpani, José R.. "Nanocellulose-coated carbon fibers towards developing hierarchical polymer matrix composites". Materials Today: Proceedings 8 (2019): 820-831. http://dx.doi.org/10.1016/j.matpr.2019.02.024.
    10.1016/j.matpr.2019.02.024
  7. Uribe, B.E.B.; Chiromito, E.M.S.; Carvalho, A.J.F.; Arenal, R.; Tarpani, J.R.. "TEMPO-oxidized cellulose nanofibers as interfacial strengthener in continuous-fiber reinforced polymer composites". Materials & Design 133 (2017): 340-348. http://dx.doi.org/10.1016/j.matdes.2017.08.004.
    10.1016/j.matdes.2017.08.004
  8. B. E. B. Uribe; J. R. Tarpani. "Interphase analysis of hierarchical composites via transmission electron microscopy". Composite Interfaces (2017): 1-11. https://doi.org/10.1080%2F09276440.2017.1299428.
    10.1080/09276440.2017.1299428
  9. B. E. B. Uribe; E. M. S. Chiromito; A. J. F. Carvalho; J. R. Tarpani; Uribe, B. E. B.; Chiromito, E. M. S.; Carvalho, A. J. F.; Tarpani, J. R.. "Low-cost, environmentally friendly route for producing CFRP laminates with microfibrillated cellulose interphase". Express Polymer Letters 11 1 (2017): 47-59. http://dx.doi.org/10.3144/expresspolymlett.2017.6.
    10.3144/expresspolymlett.2017.6
  10. Uribe, B. E. B.; Chiromito, E. M. S.; Carvalho, A. J. F.; Tarpani, J. R.. "Low-cost, environmentally friendly route for producing CFRP laminates with microfibrillated cellulose interphase". Express Polymer Letters (2017): https://publons.com/wos-op/publon/18976464/.
    10.3144/EXPRESSPOLYMLETT.2017
  11. Uribe, B. E. B.; Carvalho, A. J. F.; Tarpani, J. R.. "Low-cost, environmentally friendly route to produce glass fiber-reinforced polymer composites with microfibrillated cellulose interphase". Journal of Applied Polymer Science 133 46 (2016): n/a-n/a.
    10.1002/app.44183
  12. Buitrago, Braian; Jaramillo, Franklin; Gomez, Maryory. "Some Properties of Natural Fibers (Sisal, Pineapple, and Banana) in Comparison to Man-Made Technical Fibers (Aramide, Glass, Carbon)". Journal of Natural Fibers 12 4 (2015): 357-367. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000356500600006&KeyUID=WOS:000356500600006.
    10.1080/15440478.2014.929555
  13. Uribe, B. E. B.; Ayala, O. A.. "Characterization of three wood species (Oak, Teak and Chanul) before and after heat treatment". Journal of the Indian Academy of Wood Science 12 1 (2015): 54-62.
    10.1007/s13196-015-0144-4
  14. Buitrago, Braian; Henao, Ángela Patricia; Ayala, Orlando; Mejìa, Poseidòn. "Tableros de partículas de polvillo de aserrín reforzados con subproductos reciclados (TAR)". Informador Técnico 76 (2012): 84. http://dx.doi.org/10.23850/22565035.32.
    10.23850/22565035.32
  15. Con, Reforzado; Carbono, Nanotubos D. E.; Mecanicamente, Orientados. "Caracterización de especies maderables antes y después de diferentes tratamientos térmicos". Revista Colombiana de Materiales (2012): 93-99.
Thesis / Dissertation
  1. Uribe, Braian Esneider Buitrago; Braian Esneider Buitrago Uribe. "Desenvolvimento e caracterização de laminados compósitos hierárquicos epóxi-carbono e epóxi-vidro contendo nanocelulose interfacial". PhD, 2017. http://dx.doi.org/10.11606/t.18.2020.tde-27012020-102201.
    10.11606/t.18.2020.tde-27012020-102201
  2. "Estudio comparativo de propiedades térmicas y físicas de fibras sintéticas (Aramida, Carbono, y Vidrio) y naturales (Fique, Piña y Plátano)". Degree, 2011. https://catalejo.udea.edu.co/cgi-bin/koha/opac-detail.pl?biblionumber=575843.

Intellectual property

Patent
  1. Patricia Santos da Costa; Inês Mota; Uribe, Braian; Maria Manuela Estevez Pintado; Filipa Antunes; Burgal, João. 2023. "LIGNIN, METHODS OF EXTRACTION AND USES THEREOF".
    Granted/Issued
  2. José Ricardo Tarpani; Uribe B.E.B.; Antonio se Felix Cavalho; Emanoele Chiromito. 2021. "Processo para obtenção de materiais compósitos hierárquicos laminados de matriz polimérica reforçados com fibras contínuas e materiais compósitos". Brazil.
    Granted/Issued
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2024/09/24 Compósitos, um olhar ao presente e futuro dos materiais Seminários engenheria dos materiais
University of São Paulo (Online, Brazil)
2023/10/04 Materiais compósitos, um mundo de posibilidades Seminário de Engenharia de Polímeros
Departamento de Engenharia de Polímeros, UMinho (Guimarães, Portugal)
2019 Aplicaciones: donde los materiales cobran vida. Asociación Latinoamericana de Materiales Compuestos ALMACO
Universidad Eafit (Medellin, Colombia)
2018 Nanocellulose-coated carbon fibers towards developing hierarchical polymer matrix composites Brazilian Conference on Composite Materials BCCM4
(Rio de Janeiro, Brazil)
2018 Os materiais compósitos e sua dependência nos materiais convencionais Seminários Engenheria
FAESA (Espirito Santo, Brazil)
2018 Manufatura de materiais compósitos pelo método de infusão de resina ao vácuo utilizando molde flexível Semana do conhecimento
Novapol (Espirito Santo, Brazil)
2016 Evaluation of nanocellulose interphase in carbon fiber- reinforced polymer via Atomic Force Microscopy VII Simpósio em Ciência e Engenharia de Materiais
(Sao Carlos, Brazil)
2015 Hierarchical Carbon Fiber Composites with Microfibrillated Cellulose as secondary reinforcement Meeting on Aeronautical Composite Materials and Structures
(São Carlos, Brazil)
2013 Characterization of wood species (Oak, Teak and Chanul) before and after heat treatment VII Materials international Congress
(Medellin, Colombia)
2011 Comparative study on thermal and physical properties of industrial (aramid, carbon and glass) and natural (sisal, pineapple and banana) fibers Materials international Congress
(Bogotá, Colombia)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2024/03/25 - Current Liner-boss adhesion analysis for applications in high-pressure hydrogen storage reservoirs
Co-supervisor
 Mestrado em Engenharia de Polímeros (Master)
Universidade do Minho - Campus de Azurém, Portugal
2024/02 - Current Seleção e caracterização de materiais plásticos para reservatório interior de um tanque de hidrogénio tipo IV
Co-supervisor
 Mestrado integrado em Engenharia de Polímeros (Master)
Universidade do Minho Departamento de Engenharia de Polímeros, Portugal
2023/09/16 - Current Circularidade por Reciclagem de Compósitos de Matriz Polimérica
Supervisor
 Mestrado em Engenharia de Polímeros (Master)
Universidade do Minho Departamento de Engenharia de Polímeros, Portugal

Pólo de Inovação em Engenharia de Polímeros, Portugal
2023/09/16 - Current Desenvolvimento de painéis estruturais sanduíche em compósito ecosustentáveis
Supervisor
 Mestrado em engenharia de polímeros (Master)
Universidade do Minho Departamento de Engenharia de Polímeros, Portugal

Pólo de Inovação em Engenharia de Polímeros, Portugal
2023/09/16 - Current Estudo da adesão de tintas e adesivos estruturais sobre superfícies de componentes compósitos usados em pás eólicas
Supervisor
 Mestrado em Engenharia de Polímeros (Master)
Universidade do Minho Departamento de Engenharia de Polímeros, Portugal

Pólo de Inovação em Engenharia de Polímeros, Portugal
2021 - 2022 Wastes as admixtures for building applications and repercussion on thermal properties of 3D printing mortars
Co-supervisor
Portuguesa Centro de Biotecnologia e Química Fina, Portugal
2018 - 2018 Estudo da influência da concentração de componentes da pasta-matriz de materiais compósitos SMC.
Co-supervisor
 Engenharia química (Degree)
Universidade Federal do Espírito Santo, Brazil
2017 - 2017 Estudo comparativo de cargas inertes para redução da densidade de compósitos SMC classe A
Co-supervisor
 Engenharia química (Degree)
Universidade Federal do Espírito Santo, Brazil
2013 - 2013 Caracterización de especies maderables Roble, Teca y Chanul, antes y después de diferentes condiciones de tratamiento térmico
Supervisor
Servicio Nacional de Aprendizaje - Centro Tecnológico del Mobiliario., Colombia
2012 - 2012 Tableros hechos de aserrín reforzados con subproductos industriales (TAR)
Supervisor
 Desenho industrial (Degree)
Servicio Nacional de Aprendizaje - Centro Tecnológico del Mobiliario., Colombia

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2013/05/04 - Current Organização do congresso internacional de materiais compósitos Almaco-Colombia (2013/05/04)
Congress (Member of the Organising Committee)
 Servicio Nacional de Aprendizaje - Centro Tecnológico del Mobiliario., Colombia

Andercol SA, Colombia
2013 - Current Organização do “Primer Seminario internacional de materiales compuestos" (2013)
Seminar (Member of the Organising Committee)
 Andercol SA, Colombia

Servicio Nacional de Aprendizaje - Centro Tecnológico del Mobiliario., Colombia

Event participation

Activity description
Type of event 		Event name
Institution / Organization
2024/01/08 - Current Espaço para debater o papel da Inovação para alavancar uma Sociedade mais Inteligente e Sustentável.
Meeting
 Innovation Forum
Câmara Municipal de Guimarães, Portugal

Pólo de Inovação em Engenharia de Polímeros, Portugal
2023/11/10 - Current Thermoplastics as an alternative to thermosets in the composite industry
Workshop
Pólo de Inovação em Engenharia de Polímeros, Portugal
2019 - Current Efeito do empacotamento de partículas de CaCO3 e microesferas ocas de vidro no espessamento de compostos de resina poliéster insaturado para aplicações no processo SMC. Poster Presentation
Congress
 Congresso Brasileiro de Polímeros CBPol
Universidade Federal do Rio Grande do Sul, Brazil
2019 - Current Influência da concentração de componentes na viscosidade da pasta matriz de materiais compósitos Sheet Molding Compounds. Poster presentation
Congress
 Congresso Brasileiro de Polímeros CBPol
Universidade Federal do Rio Grande do Sul, Brazil
2018 - Current Estudo para redução da densidade relativa de compósitos do tipo SMC classe A. Poster presentation.
Congress
 XXII Congresso Brasileiro de Engenharia Química
2024/01/25 - 2024/01/25 Boas Práticas na Orientação Doutoral
Seminar
 Boas Práticas na Orientação Doutoral
Universidade do Minho, Portugal

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2024/11/09 Avaliação do Potencial de Reciclagem do PC/ABS para Aplicação na Indústria Automóvel
(Thesis) Main arguer
 Lara Mariana Fernandes Cerqueira (Master)
Universidade do Minho Departamento de Engenharia de Polímeros, Portugal
2024/11/02 Caraterização e processabilidade de polietileno reciclado pós consumo para o processo de moldação rotacional
(Thesis) Main arguer
 Maria da Silva Ribeiro (Master)
Universidade do Minho Departamento de Engenharia de Polímeros, Portugal
2024/07/12 Development of Flexible Composites for Energy Storage
(Thesis) Main arguer
 Carlos Felgueiras (Master)
Universidade de Aveiro Departamento de Física, Portugal
2023/11/28 Production of melt-spinning fibers with heat conduction properties
(Thesis) Main arguer
 Tomás Ramos Ribeiro (Master)
Universidade do Minho Departamento de Engenharia de Polímeros, Portugal
2023/11/24 Circularity of Thermoplastic Matrix Composites and applications
(Thesis) Main arguer
 Nhlapo Thutswana Victor (Master)
Universidade do Minho Departamento de Engenharia de Polímeros, Portugal

Ad Hoc journal article review

Journal title (ISSN) Publisher
2024/12/14 - Current Journal of Composite Science (2504-477X) MDPI
2024/10/05 - Current Ingeniería (2344-8393) Universidad distrital Francisco José de Caldas
2024 - Current Qeios
2023 - Current Journal of Applied Polymer Science (1097-4628) Wiley
2020 - Current Revista Colombiana de Materiales (2256-1013) Universidad de Antioquia
2016 - 2016 Matéria (1517-7076) Scielo
2014 - 2014 Composites part B - Engineering (1359-8368) El sevier

Conference scientific committee

Conference name Conference host
2020 - Current Simpósio em Ciência e Engenharia de Materiais São Carlos - Brazil

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2024/02 - 2024/08 Mecánica de Materiais Licenciatura em Engenharia de Polímeros (Licenciatura) Universidade do Minho - Campus de Azurém, Portugal
2023/09 - 2024/02 Introdução ao Projeto com Polímeros Licenciatura em Engenharia de Polímeros (Licenciatura) Universidade do Minho - Campus de Azurém, Portugal
2023/09 - 2024/02 Materiais Compósitos matrix polimérica Mestrado em Engenharia de Polímeros (Mestrado integrado) Universidade do Minho - Campus de Azurém, Portugal
2016/01 - 2016/06 Materiais compósitos estruturais Programa de aperfeiçoamento de ensino - PAE Materiais compósitos estruturais (Bachelor) Universidade de São Paulo Escola de Engenharia de São Carlos, Brazil
2015/07 - 2015/12 Laboratorio de Materiais Compósitos Programa de aperfeiçoamento de ensino PAE Laboratorio de Materiais Compósitos (Bachelor) Universidade de São Paulo Escola de Engenharia de São Carlos, Brazil
2012 - 2013 Materiales de Ingeniería Materiales de Ingeniería (Bachelor) Servicio Nacional de Aprendizaje - Centro Tecnológico del Mobiliario., Colombia
2012 - 2013 Metodologia de la Investigación científica Metodologia de la Investigación científica (Bachelor) Servicio Nacional de Aprendizaje - Centro Tecnológico del Mobiliario., Colombia

Evaluation committee

Activity description
Role 		Institution / Organization Funding entity
2024/10/26 - Current Evaluation of the research plan entitled “Desenvolvimento de Metamateriais Mecânicos Compósitos (MMMS) in-plane e Otimização de Propriedades de Delaminação e Absorção de Energia para Aplicações Aeroespaciais
Evaluator
 Universidade do Minho Instituto de Polímeros e Compósitos, Portugal

Universidade do Minho Associação Fibrenamics, Portugal 		Fundação para a Ciência e a Tecnologia

Other jury / evaluation

Activity description Institution / Organization
2024/02/08 - Current Juri para projeto de dissertação com título "Efeito do design de produto na pintura e cromagem de peças plásticas" do Departamento de Engenharia de Polímeros Universidade do Minho - Campus de Azurém, Portugal

Universidade do Minho Departamento de Engenharia de Polímeros, Portugal
2024/02/08 - Current Juri para projeto de dissertação com título "Optimising the Initial Phase of Polyurethane Shoe Soles Injection" do Departamento de Engenharia de Polímeros Universidade do Minho - Campus de Azurém, Portugal

Universidade do Minho Departamento de Engenharia de Polímeros, Portugal
2019/06/04 - Current Júri em banca de qualificação para trabalho de doutoramento do programa de Aeronaves no departamento de Engenharia mecânica. Prijeto de tese: Curaua woven fabric - epoxy unidirectional compatibilized composite. Autor José Fernando Barbosa. Universidade de São Paulo Escola de Engenharia de São Carlos, Brazil
Distinctions

Award

2015 bolsa 140339-15
Conselho Nacional de Desenvolvimento Científico e Tecnológico, Brazil

Universidade de São Paulo Escola de Engenharia de São Carlos, Brazil
2010 CODI PR09-2-03 (CIDEMAT)
Universidad de Antioquía, Colombia

Other distinction

2023 Concurso CEECINST/00018/2021/CP2806/CT0002
Universidade do Minho Instituto de Polímeros e Compósitos, Portugal
2020 Concurso no âmbito do projeto Alchemy, Refª CI_R#1.13
Portuguesa Centro de Biotecnologia e Química Fina, Portugal

Universidade Católica Portuguesa Escola Superior de Biotecnologia, Portugal

Amyris Inc, United States