| Journal article |
- Francisco J. G. Silva; Naiara P. V. Sebbe; Rúben D. F. S. Costa; André F. V. Pedroso; Rita C. M. Sales-Contini; Marta L. S.
Barbosa; Rui P. Martinho. "Investigations on the Surface Integrity and Wear Mechanisms of TiAlYN-Coated Tools in Inconel 718
Milling Operations". Materials (2024): https://doi.org/10.3390/ma17020443.
10.3390/ma17020443
- Rita C. M. Sales-Contini; Hugo M. S. Costa; Heide H. Bernardi; William M. M. Menezes; Francisco J. G. Silva. "Mechanical Strength
and Surface Analysis of a Composite Made from Recycled Carbon Fibre Obtained via the Pyrolysis Process for Reuse in the Manufacture
of New Composites". Materials (2024): https://doi.org/10.3390/ma17020423.
10.3390/ma17020423
- Francisca R. Nogueira; André F. V. Pedroso; Francisco J. G. Silva; Raul D. S. G. Campilho; Rita C. M. Sales-Contini; Naiara
P. V. Sebbe; Rafaela C. B. Casais. "A Comparative Study on the Wear Mechanisms of Uncoated and TiAlTaN-Coated Tools Used in
Machining AMPCO® Alloy". Coatings (2023): https://doi.org/10.3390/coatings14010004.
10.3390/coatings14010004
- Raul D. S. G. Campilho; Francisco J. G. Silva. "Industrial Process Improvement by Automation and Robotics". Machines
(2023): https://doi.org/10.3390/machines11111011.
10.3390/machines11111011
- Eduardo Eiras; Francisco J. G. Silva; Raul D. S. G. Campilho; Rita C. M. Sales-Contini; André F. V. Pedroso; Naiara P. V.
Sebbe. "A Novel Fully Automatic Concept to Produce First Subset of Bowden Cables, Improving Productivity, Flexibility, and
Safety". Machines (2023): https://doi.org/10.3390/machines11110992.
10.3390/machines11110992
- Hélio Moreira; Luís P. Ferreira; Nuno O. Fernandes; Francisco J. G. Silva; Ana L. Ramos; Paulo Ávila. "A Simulation Study
of Aircraft Boarding Strategies". Mathematics (2023): https://doi.org/10.3390/math11204288.
10.3390/math11204288
- José Carlos Sá; Leonardo Soares; José Dinis-Carvalho; Francisco J. G. Silva; Gilberto Santos. "Assessment of the Impact of
Lean Tools on the Safety of the Shoemaking Industry". Safety (2023): https://doi.org/10.3390/safety9040070.
10.3390/safety9040070
- Marta L. S. Barbosa; Rúben D. F. S. Costa; Francisco J. G. Silva; Susana R. Sousa; Arnaldo G. Pinto; Bruno O. Ferreira. "Studying
the Degradation of Three Polymers under Different Chlorine Concentrations and Exposure Times". Polymers (2023): https://doi.org/10.3390/polym15193931.
10.3390/polym15193931
- Francisco J. G. Silva; Filipe Fernandes; Vitor F. C. Sousa. "Machining: State-of-the-Art 2022". Metals (2023): https://doi.org/10.3390/met13061036.
10.3390/met13061036
- Francisco Matos; Tiago E. F. Silva; Vitor F. C. Sousa; Francisco Marques; Daniel Figueiredo; Francisco J. G. Silva; Abílio
M. P. de Jesus. "On the Influence of Binder Material in PCBN Cutting Tools for Turning Operations of Inconel 718". Metals
(2023): https://doi.org/10.3390/met13050934.
10.3390/met13050934
- Andresa Baptista; Gustavo F. Pinto; Vitor F. C. Sousa; Francisco J. G. Silva; Filipe Fernandes. "Study on the Micro-Abrasion
Wear Behavior of PVD Hard Coating under Different SiC Abrasive Particles/Distilled Water Ratios". Materials (2023):
https://doi.org/10.3390/ma16082939.
10.3390/ma16082939
- Vitor F. C. Sousa; Filipe Fernandes; Francisco J. G. Silva; Rúben D. F. S. Costa; Naiara Sebbe; Rita C. M. Sales-Contini.
"Wear Behavior Phenomena of TiN/TiAlN HiPIMS PVD-Coated Tools on Milling Inconel 718". Metals (2023): https://doi.org/10.3390/met13040684.
10.3390/met13040684
- Rúben D. F. S. Costa; Rita C. M. Sales-Contini; Francisco J. G. Silva; Naiara Sebbe; Abílio M. P. Jesus. "A Critical Review
on Fiber Metal Laminates (FML): From Manufacturing to Sustainable Processing". Metals (2023): https://doi.org/10.3390/met13040638.
10.3390/met13040638
- Rúben D. F. S. Costa; Marta L. S. Barbosa; Francisco J. G. Silva; Susana R. Sousa; Vitor F. C. Sousa; Bruno O. Ferreira. "Study
of the Chlorine Influence on the Corrosion of Three Steels to Be Used in Water Treatment Municipal Facilities". Materials
(2023): https://doi.org/10.3390/ma16062514.
10.3390/ma16062514
- Manuel Gaspar; Francisco J. G. Silva; Arnaldo G. Pinto; Raul D. S. G. Campilho. "2D and 3D Wires Formability for Car Seats:
A Novel Full-Automatic Equipment Concept towards High Productivity and Flexibility". Machines (2023): https://doi.org/10.3390/machines11030410.
10.3390/machines11030410
- Gustavo Filipe Pinto; Andresa Baptista; Vitor F. C. Sousa; Francisco J. G. Silva; Manuel Evaristo; Filipe Fernandes. "Study
on the Wear Modes of PVD Films Using Different Concentrations of Al2O3 Abrasive Particles and Textured Rotating Balls". Coatings
(2023): https://doi.org/10.3390/coatings13030628.
10.3390/coatings13030628
- A. F. V. Pedroso; V. F. C. Sousa; N. P. V. Sebbe; F. J. G. Silva; R. D. S. G. Campilho; R. C. M. Sales-Contini; A. M. P. Jesus.
"A Comprehensive Review on the Conventional and Non-Conventional Machining and Tool-Wear Mechanisms of INCONEL®". Metals
(2023): https://doi.org/10.3390/met13030585.
10.3390/met13030585
- Vitor F. C. Sousa; Francisco J. G. Silva; Ricardo Alexandre; José S. Fecheira; Gustavo Pinto; Andresa Baptista. "Experimental
study on the wear evolution of different PVD coated tools under milling operations of LDX2101 duplex stainless steel". Advances
in Manufacturing (2023): https://doi.org/10.1007/s40436-022-00401-5.
10.1007/s40436-022-00401-5
- A.F.M.V. Silva; L.M.C. Peres; R.D.S.G. Campilho; R.J.B. Rocha; F.J.G. Silva. "Cohesive zone parametric analysis in the tensile
impact strength of tubular adhesive joints". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of
Process Mechanical Engineering (2023): https://doi.org/10.1177/09544089221088261.
10.1177/09544089221088261
- A.F.L. Macedo; R.D.S.G. Campilho; F.J.G. Silva; MA Bellali. "Numerical analysis of the mixed-mode fracture of bonded joints
depending on the adhesive thickness". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process
Mechanical Engineering (2023): https://doi.org/10.1177/09544089221088262.
10.1177/09544089221088262
- Rúben D. F. S. Costa; Marta L. S. Barbosa; Francisco J. G. Silva; Susana R. Sousa; Arnaldo G. Pinto; Vitor F. C. Sousa; Bruno
O. Ferreira. "The Impact of the Deterioration on Wood by Chlorine: An Experimental Study". Materials (2023): https://doi.org/10.3390/ma16030969.
10.3390/ma16030969
- Vitor Santos; Vitor F. C. Sousa; Francisco J. G. Silva; João C. O. Matias; Rúben D. Costa; Arnaldo G. Pinto; Raul D. S. G.
Campilho. "Applying the SMED Methodology to Tire Calibration Procedures". Systems (2022): https://doi.org/10.3390/systems10060239.
10.3390/systems10060239
- Naiara P. V. Sebbe; Filipe Fernandes; Vitor F. C. Sousa; Francisco J. G. Silva. "Hybrid Manufacturing Processes Used in the
Production of Complex Parts: A Comprehensive Review". Metals (2022): https://doi.org/10.3390/met12111874.
10.3390/met12111874
- André Rodrigues; Francisco J. G. Silva; Vitor F. C. Sousa; Arnaldo G. Pinto; Luís P. Ferreira; Teresa Pereira. "Using an Artificial
Neural Network Approach to Predict Machining Time". Metals (2022): https://doi.org/10.3390/met12101709.
10.3390/met12101709
- Jorge Manuel Moreira Vieira; Raul Duarte Salgueiral Gomes Campilho; Francisco José Gomes da Silva; Isidro de Jesús Sánchez-Arce.
"Development of a rotation and lifting system for pallet rotary tables". The International Journal of Advanced Manufacturing
Technology (2022): https://doi.org/10.1007/s00170-022-09881-y.
10.1007/s00170-022-09881-y
- José L. T. A. Pereira; Raul D. S. G. Campilho; Francisco J. G. Silva; Isidro J. Sánchez-Arce; Chander Prakash; Dharam Buddhi.
"Improving the Efficiency of the Bowden Cable Terminal Injection Process for the Automotive Industry". Processes (2022):
https://doi.org/10.3390/pr10101953.
10.3390/pr10101953
- Rúben Costa; Vitor Sousa; Francisco J. G. Silva; Raul Campilho; José C. Sá; Arnaldo Pinto; João Pereira. "Increasing the Sustainability
of Manufacturing Processes in Plastic Injection: Recovering Out-Of-Service Robots to Eliminate Manual Assembly Operations".
Sustainability (2022): https://doi.org/10.3390/su141912300.
10.3390/su141912300
- Rúben Costa; Vitor F. C. Sousa; Francisco J. G. Silva; Raul Campilho; Arnaldo G. Pinto; Luís P. Ferreira; Rui Soares. "A Novel
Robotic Manipulator Concept for Managing the Winding and Extraction of Yarn Coils". Machines (2022): https://doi.org/10.3390/machines10100857.
10.3390/machines10100857
- André F. G. Barbosa; Raul D. S. G. Campilho; Francisco J. G. Silva; Isidro J. Sánchez-Arce; Chander Prakash; Dharam Buddhi.
"Design of a Spiral Double-Cutting Machine for an Automotive Bowden Cable Assembly Line". Machines (2022): https://doi.org/10.3390/machines10090811.
10.3390/machines10090811
- Francisco José Gomes Silva; Konstantinos Kirytopoulos; Luis Pinto Ferreira; José Carlos Sá; Gilberto Santos; Maria Carolina
Cancela Nogueira. "The three pillars of sustainability and agile project management: How do they influence each other". Corporate
Social Responsibility and Environmental Management (2022): https://doi.org/10.1002/csr.2287.
10.1002/csr.2287
- José Carlos Sá; Manuel Reis; José Dinis-Carvalho; Francisco J. G. Silva; Gilberto Santos; Luis P. Ferreira; Vanda Lima. "The
Development of an Excellence Model Integrating the Shingo Model and Sustainability". Sustainability (2022): https://doi.org/10.3390/su14159472.
10.3390/su14159472
- R Penne; FJG Silva; RDSG Campilho; G Santos; VFC Sousa; LP Ferreira; JC Sá; MT Pereira. "A new approach to increase the environmental
sustainability of the discharging process in the over-injection of conduits for bowden cables using automation". Proceedings
of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2022): https://doi.org/10.1177/09544062221087547.
10.1177/09544062221087547
- J. A. P. Pereira; R. D. S. G. Campilho; F. J. G. Silva; I. J. Sánchez-Arce. "Robotized cell design for part assembly in the
automotive industry". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering
Science (2022): https://doi.org/10.1177/09544062221082860.
10.1177/09544062221082860
- Eva S. V. Marques; António B. Pereira; Francisco J. G. Silva. "Quality Assessment of Laser Welding Dual Phase Steels". Metals
(2022): https://doi.org/10.3390/met12081253.
10.3390/met12081253
- Francisco J. G. Silva; Vitor F. C. Sousa; Arnaldo G. Pinto; Luís P. Ferreira; Teresa Pereira. "Build-Up an Economical Tool
for Machining Operations Cost Estimation". Metals (2022): https://doi.org/10.3390/met12071205.
10.3390/met12071205
- Rafaela Casais; António Monteiro Baptista; Francisco José Silva; Fátima Andrade; Vitor Sousa; Maria José Marques. "Experimental
study on the wear behavior of B4C and TiB2 monolayered PVD coatings under high contact loads". The International Journal
of Advanced Manufacturing Technology 120 9-10 (2022): 6585-6604. https://doi.org/10.1007/s00170-022-09182-4.
10.1007/s00170-022-09182-4
- Vitor F. C. Sousa; Francisco J. G. Silva; Ricardo Alexandre; Gustavo Pinto; Andresa Baptista; José S. Fecheira. "Investigations
on the Wear Performance of Coated Tools in Machining UNS S32101 Duplex Stainless Steel". Metals (2022): https://doi.org/10.3390/met12060896.
10.3390/met12060896
- Daniel Soares; Francisco José Gomes da Silva; Sandra Cristina Faria Ramos; Konstantinos Kirytopoulos; José Carlos Sá; Luís
Pinto Ferreira. "Identifying Barriers in the Implementation of Agile Methodologies in Automotive Industry". Sustainability
14 9 (2022): 5453-5453. https://doi.org/10.3390/su14095453.
10.3390/su14095453
- F. J. G. Silva; Vitor F. C. Sousa; Campilho R.D.S.G.; Ricardo Alexandre. "Wear Behavior of Coated Tools When Milling S32101
Duplex Stainless Steel". Materials Proceedings (2022): https://www.mdpi.com/2673-4605/8/1/45.
10.3390/materproc2022008045
- Vitor Fernando Crespim Sousa; Francisco José Gomes da Silva; Raul Duarte Salgueiral Gomes Campilho; Arnaldo Guedes Pinto;
Luís Pinto Ferreira; Nuno Martins. "Developing a Novel Fully Automated Concept to Produce Bowden Cables for the Automotive
Industry". Machines 10 5 (2022): 290-290. https://doi.org/10.3390/machines10050290.
10.3390/machines10050290
- DM Nunes; RDSG Campilho; FJG Silva. "Design of a transfer system for the automotive industry". Proceedings of the Institution
of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (2022): https://doi.org/10.1177/09544089221080042.
10.1177/09544089221080042
- Silva, F. J. G.; Campilho, R. D. S. G.; Sousa, V. F. C.; Coelho, L. F. P.; Ferreira, L. P.; Pereira, M. T.; Matos, J.. "A
New Concept of Jig Rotary Holder System for 3-Axis CNC Milling Machine Operated by the Main Machine Control". Journal of
Testing and Evaluation 50 5 (2022): 20210723. http://dx.doi.org/10.1520/jte20210723.
10.1520/jte20210723
- Carla M. A. Pinto; Jorge Mendonça; Lurdes Babo; Francisco J. G. Silva; José L. R. Fernandes. "Analyzing the Implementation
of Lean Methodologies and Practices in the Portuguese Industry: A Survey". Sustainability 14 3 (2022): 1929-1929. https://doi.org/10.3390/su14031929.
10.3390/su14031929
- Teixeira, Pedro; Coelho, Arnaldo; Fontoura, Pedro; Sá, José Carlos; Silva, Francisco J. G.; Santos, Gilberto; Ferreira, Luis
P.; et al. "Combining lean and green practices to achieve a superior performance: The contribution for a sustainable development
and competitiveness—An empirical study on the Portuguese context". Corporate Social Responsibility and Environmental Management
(2022): http://dx.doi.org/10.1002/csr.2242.
10.1002/csr.2242
- Marinho, Paulo; Pimentel, Daniel; Casais, Rafaela; Silva, Francisco; Carlos Sá, José; Pinto Ferreira, Luís. "Selecting the
best tools and framework to evaluate equipment malfunctions and improve the OEE in the cork industry". International Journal
of Industrial Engineering and Management 12 4 (2021): 286-298. http://dx.doi.org/10.24867/ijiem-2021-4-295.
10.24867/ijiem-2021-4-295
- Fátima de Almeida; Vitor F. C. Sousa; Francisco J. G. Silva; Raúl D. S. G. Campilho; Luís P. Ferreira. "Development of a Novel
Design Strategy for Moving Mechanisms Used in Multi-Material Plastic Injection Molds". Applied Sciences (2021): https://doi.org/10.3390/app112411805.
10.3390/app112411805
- Vieira, Alexandre L. N.; Campilho, Raul D. S. G.; Silva, Francisco J. G.; Ferreira, Luís P.; Alexandre L. N. Vieira; Raul
D. S. G. Campilho; Francisco J. G. Silva; Luís P. Ferreira. "Increasing the Environmental Sustainability of an Over-Injection
Line for the Automotive Component Industry". Sustainability 13 22 (2021): 12692-12692. http://dx.doi.org/10.3390/su132212692.
10.3390/su132212692
- Teixeira, P.; Sá, J.C.; Silva, F.J.G.; Ferreira, L.P.; Santos, G.; Fontoura, P.. "Connecting lean and green with sustainability
towards a conceptual model". Journal of Cleaner Production 322 (2021): 129047. http://dx.doi.org/10.1016/j.jclepro.2021.129047.
10.1016/j.jclepro.2021.129047
- Pessoa, B; Ferreira, L P; Silva, F J G; Sá, J C; Ávila, P; Ares, J E. "Assessment of the flexibility of implementing lean
tools". IOP Conference Series: Materials Science and Engineering 1193 1 (2021): 012050. http://dx.doi.org/10.1088/1757-899x/1193/1/012050.
10.1088/1757-899x/1193/1/012050
- Costa, A; Ferreira, L P; Silva, F J G; Sá, J C; Pereira, M T; Ávila, P. "Analysis and improvement in the Electrical Discharge
Machining process used on the manufacturing of moulds for plastics injection moulding". IOP Conference Series: Materials
Science and Engineering 1193 1 (2021): 012021. http://dx.doi.org/10.1088/1757-899x/1193/1/012021.
10.1088/1757-899x/1193/1/012021
- Marques, J P; Sá, J C; Silva, F J G; Pereira, T; Ferreira, L P; Santos, G. "Safety efficiency value stream mapping (SEVSM)
- A new tool to support the implementation of Lean Safety". IOP Conference Series: Materials Science and Engineering
1193 1 (2021): 012124. http://dx.doi.org/10.1088/1757-899x/1193/1/012124.
10.1088/1757-899x/1193/1/012124
- Sá, J C; Manuel, V; Silva, F J G; Santos, G; Ferreira, L P; Pereira, T; Carvalho, M. "Lean Safety - assessment of the impact
of 5S and Visual Management on safety". IOP Conference Series: Materials Science and Engineering 1193 1 (2021): 012049.
http://dx.doi.org/10.1088/1757-899x/1193/1/012049.
10.1088/1757-899x/1193/1/012049
- Vitor F. C. Sousa; Francisco J. G. Silva; Hernâni Lopes; Rafaela C. B. Casais; Andresa Baptista; Gustavo Pinto; Ricardo Alexandre.
"Wear Behavior and Machining Performance of TiAlSiN-Coated Tools Obtained by dc MS and HiPIMS: A Comparative Study". Materials
(2021): https://doi.org/10.3390/ma14185122.
10.3390/ma14185122
- Vitor F. C. Sousa; João Castanheira; Francisco J. G. Silva; José S. Fecheira; Gustavo Pinto; Andresa Baptista. "Wear Behavior
of Uncoated and Coated Tools in Milling Operations of AMPCO (Cu-Be) Alloy". Applied Sciences (2021): https://doi.org/10.3390/app11167762.
10.3390/app11167762
- F. J. G. Silva; M. R. Soares; L. P. Ferreira; A. C. Alves; M. Brito; R. D. S. G. Campilho; V. F. C. Sousa. "A Novel Automated
System for the Handling of Car Seat Wires on Plastic Over-Injection Molding Machines". Machines 9 8 (2021): 141-141.
https://doi.org/10.3390/machines9080141.
10.3390/machines9080141
- Baptista, A.; Silva, F.J.G.; Pinto, G.; Porteiro, J.; Míguez, J.; Alexandre, R.; Sousa, V.F.C.. "Influence of the ball surface
texture in the dragging of abrasive particles on micro-abrasion wear tests". Wear 476 (2021): 203730. http://dx.doi.org/10.1016/j.wear.2021.203730.
10.1016/j.wear.2021.203730
- Sousa, Vitor F.C.; Silva, F.J.G.; Alexandre, R.; Fecheira, J.S.; Silva, F.P.N.. "Study of the wear behaviour of TiAlSiN and
TiAlN PVD coated tools on milling operations of pre-hardened tool steel". Wear 476 (2021): 203695. http://dx.doi.org/10.1016/j.wear.2021.203695.
10.1016/j.wear.2021.203695
- da Silva, João Carlos; da Silva, Francisco José Gomes; Campilho, Raul Duarte Salgueiral Gomes; de Sá, José Carlos Vieira;
Pinto Ferreira, Luís Carlos Ramos Nunes. "A model for productivity improvement on machining of components for stamping dies".
International Journal of Industrial Engineering and Management 12 2 (2021): 85-102. http://dx.doi.org/10.24867/ijiem-2021-2-279.
10.24867/ijiem-2021-2-279
- Silva, F. J. G.; Casais, R. C. B.; Baptista, A. P. M.; Marques, M. J.; Sousa, V. M. C.; Alexandre, R.. "Comparative Study
of the Wear Behavior of B4C Monolayered and CrN/CrCN/DLC Multilayered Physical Vapor Deposition Coatings Under High Contact
Loads: An Experimental Analysis". Journal of Tribology 144 3 (2021): http://dx.doi.org/10.1115/1.4051226.
10.1115/1.4051226
- Baptista, Andresa; Pinto, Gustavo; Silva, Francisco J. G.; Ferreira, Andreia A.; Pinto, Arnaldo G.; Sousa, Vitor F. C.; Andresa
Baptista; et al. "Wear Characterization of Chromium PVD Coatings on Polymeric Substrate for Automotive Optical Components".
Coatings 11 5 (2021): 555-555. http://dx.doi.org/10.3390/coatings11050555.
10.3390/coatings11050555
- Silva, André; Silva, Francisco J.G.; Campilho, Raul D.S.G.; Neves, Pedro M.P.F.. "A new approach to temperature control in
the extrusion process of composite tire products". Journal of Manufacturing Processes 65 (2021): 80-96. http://dx.doi.org/10.1016/j.jmapro.2021.03.022.
10.1016/j.jmapro.2021.03.022
- Francisco J. G. Silva. "Metal Machining—Recent Advances, Applications, and Challenges". Metals (2021): https://doi.org/10.3390/met11040580.
10.3390/met11040580
- Alexandre Silva; José C. Sá; Gilberto Santos; Francisco J.G. Silva; Luís P. Ferreira; Maria T. Pereira; Silva, Alexandre;
et al. "A Comparison of the Application of the SMED Methodology in Two Different Cutting Lines". Quality Innovation Prosperity
25 1 (2021): 124-149. https://doi.org/10.12776/qip.v25i1.1446.
10.12776/qip.v25i1.1446
- Vitor F. C. Sousa; Francisco J. G. Silva; António P. Pinho; António B. Pereira; Olga C. Paiva. "Enhancing Heat Treatment Conditions
of Joints in Grade P91 Steel: Looking for More Sustainable Solutions". Metals 11 3 (2021): 495-495. https://doi.org/10.3390/met11030495.
10.3390/met11030495
- Vítor Silva; Luís Pinto Ferreira; Francisco J. G. Silva; Benny Tjahjono; Paulo Ávila; Silva, Vítor; Ferreira, Luís Pinto;
et al. "Simulation-Based Decision Support System to Improve Material Flow of a Textile Company". Sustainability 13
5 (2021): 2947-2947. https://doi.org/10.3390/su13052947.
10.3390/su13052947
- Óscar Teixeira; Francisco J. G. Silva; Eleonora Atzeni; Teixeira, Óscar; Silva, Francisco J. G.; Atzeni, Eleonora. "Residual
stresses and heat treatments of Inconel 718 parts manufactured via metal laser beam powder bed fusion: an overview". The
International Journal of Advanced Manufacturing Technology 113 11-12 (2021): 3139-3162. https://doi.org/10.1007/s00170-021-06835-8.
10.1007/s00170-021-06835-8
- Andreia A. Ferreira; Francisco J. G. Silva; Arnaldo G. Pinto; Vitor F. C. Sousa. "Characterization of Thin Chromium Coatings
Produced by PVD Sputtering for Optical Applications". Coatings 11 2 (2021): 215-215. https://doi.org/10.3390/coatings11020215.
10.3390/coatings11020215
- Vitor F. C. Sousa; Francisco José Gomes Da Silva; Gustavo Filipe Pinto; Andresa Baptista; Ricardo Alexandre. "Characteristics
and Wear Mechanisms of TiAlN-Based Coatings for Machining Applications: A Comprehensive Review". Metals (2021): https://doi.org/10.3390/met11020260.
10.3390/met11020260
- Gustavo Pinto; Andresa Baptista; Francisco Silva; Jacobo Porteiro; José Míguez; Ricardo Alexandre. "Study on the Influence
of the Ball Material on Abrasive Particles’ Dynamics in Ball-Cratering Thin Coatings Wear Tests". Materials 14 3 (2021):
668-668. https://doi.org/10.3390/ma14030668.
10.3390/ma14030668
- Santos, P.M.M.; Campilho, R.D.S.G.; Silva, F.J.G.. "A new concept of full-automated equipment for the manufacture of shirt
collars and cuffs". Robotics and Computer-Integrated Manufacturing 67 (2021): 102023. http://dx.doi.org/10.1016/j.rcim.2020.102023.
10.1016/j.rcim.2020.102023
- Pinto, Gustavo; Silva, F.J.G.; Baptista, A.; Campilho, Raul; Viana, F.. "Investigations on the oxidation of Zn-coated steel
cables". FME Transactions 49 3 (2021): 587-597. http://dx.doi.org/10.5937/fme2103587p.
10.5937/fme2103587p
- Faria, N.M.S.; Campilho, Raul; Silva, F.J.G.; Ferreira, L.P.. "Concept and design of automated moving device for healthcare
equipment". FME Transactions 49 3 (2021): 598-607. http://dx.doi.org/10.5937/fme2103598f.
10.5937/fme2103598f
- Sousa, V.F.C.; Silva, F.J.G.; Ferreira, L.P.; Campilho, R.D.S.G.; Pereira, T.; Braga, E.. "Improving the design of nozzles
used in zamak high-pressure die-casting process". FME Transactions 49 4 (2021): 1005-1013. http://dx.doi.org/10.5937/fme2104005s.
10.5937/fme2104005s
- Vieira, A.L.N.; Campilho, R.D.S.G.; Silva, F.J.G.; Faria, N.M.S.; Ferreira, L.P.. "Design of a thermoplastic micro over injection
machine for the automotive component industry". Procedia Manufacturing 55 (2021): 56-63. http://dx.doi.org/10.1016/j.promfg.2021.10.009.
10.1016/j.promfg.2021.10.009
- Bastos, N.M.; Alves, A.C.; Castro, F.X.; Duarte, J.; Ferreira, L.P.; Silva, F.J.G.. "Reconfiguration of assembly lines using
Lean Thinking in an electronics components’ manufacturer for the automotive industry". Procedia Manufacturing 55 (2021):
383-392. http://dx.doi.org/10.1016/j.promfg.2021.10.053.
10.1016/j.promfg.2021.10.053
- Antunes, R.P.R.O.; Campilho, R.D.S.G.; Silva, F.J.G.; Vieira, A.L.N.. "Numerical validation of cohesive laws for adhesive
layers with varying thickness in bonded structures". Procedia Manufacturing 55 (2021): 213-220. http://dx.doi.org/10.1016/j.promfg.2021.10.030.
10.1016/j.promfg.2021.10.030
- Brito, R.F.N.; Campilho, R.D.S.G.; Moreira, R.D.F.; Sánchez-Arce, I.J.; Silva, F.J.G.. "Composite stepped-lap adhesive joint
analysis by cohesive zone modelling". Procedia Structural Integrity 33 (2021): 665-672. http://dx.doi.org/10.1016/j.prostr.2021.10.074.
10.1016/j.prostr.2021.10.074
- Faria, R.V.F.; Campilho, R.D.S.G.; Gonçalves, P.J.A.; Rocha, R.J.B.; Sánchez-Arce, I.J.; Silva, F.J.G.. "Numerical analysis
by XFEM of hybrid T-peel joints". Procedia Structural Integrity 33 (2021): 673-684. http://dx.doi.org/10.1016/j.prostr.2021.10.075.
10.1016/j.prostr.2021.10.075
- Jorge Rodrigues; José Carlos Sá; Francisco J. G. Silva; Luís Pinto Ferreira; Genett Jimenez; Gilberto Santos. "A Rapid Improvement
Process through “Quick-Win” Lean Tools: A Case Study". Systems 8 4 (2020): 55-55. https://doi.org/10.3390/systems8040055.
10.3390/systems8040055
- Sousa, Vitor F. C.; Silva, Francisco J. G.; Fecheira, José S.; Lopes, Hernâni M.; Martinho, Rui Pedro; Casais, Rafaela B.;
Ferreira, Luís Pinto; et al. "Cutting Forces Assessment in CNC Machining Processes: A Critical Review". Sensors 20
16 (2020): 4536-4536. http://dx.doi.org/10.3390/s20164536.
10.3390/s20164536
- Óscar Teixeira; Francisco J. G. Silva; Luís P. Ferreira; Eleonora Atzeni. "A Review of Heat Treatments on Improving the Quality
and Residual Stresses of the Ti–6Al–4V Parts Produced by Additive Manufacturing". Metals (2020): https://doi.org/10.3390/met10081006.
10.3390/met10081006
- Ronny M. Gouveia; Francisco J. G. Silva; Eleonora Atzeni; Dušan Sormaz; Jorge Lino Alves; António Bastos Pereira. "Effect
of Scan Strategies and Use of Support Structures on Surface Quality and Hardness of L-PBF AlSi10Mg Parts". Materials
(2020): https://doi.org/10.3390/ma13102248.
10.3390/ma13102248
- Vitor F. C. Sousa; Francisco J. G. Silva. "Recent Advances on Coated Milling Tool Technology—A Comprehensive Review". Coatings
(2020): https://doi.org/10.3390/coatings10030235.
10.3390/coatings10030235
- Vitor F. C. Sousa; Francisco J. G. Silva. "Recent Advances in Turning Processes Using Coated Tools—A Comprehensive Review".
Metals 10 2 (2020): 170-170. https://doi.org/10.3390/met10020170.
10.3390/met10020170
- Francisco José Gomes Silva; António Pedro Pinho; António Bastos Pereira; Olga Coutinho Paiva. "Evaluation of Welded Joints
in P91 Steel under Different Heat-Treatment Conditions". Metals 10 1 (2020): 99-99. https://doi.org/10.3390/met10010099.
10.3390/met10010099
- Eva S. V. Marques; Francisco J. G. Silva; António B. Pereira. "Comparison of Finite Element Methods in Fusion Welding Processes—A
Review". Metals 10 1 (2020): 75-75. https://doi.org/10.3390/met10010075.
10.3390/met10010075
- Oliveira, J.J.G.; Campilho, R.D.S.G.; Silva, F.J.G.; Marques, E.A.S.; Machado, J.J.M.; da Silva, L.F.M.. "Adhesive thickness
effects on the mixed-mode fracture toughness of bonded joints". Journal of Adhesion 96 1-4 (2020): 300-320. http://www.scopus.com/inward/record.url?eid=2-s2.0-85074486517&partnerID=MN8TOARS.
10.1080/00218464.2019.1681269
- Silva, André F.A.; Silva, F.J.G.; Campilho, R.D.S.G.; Neves, Pedro M.P.F.. "3D finite element analysis and optimization of
cap ply production system in the tire industry". Procedia Manufacturing 51 (2020): 763-770. http://dx.doi.org/10.1016/j.promfg.2020.10.107.
10.1016/j.promfg.2020.10.107
- Martins, Nuno; Silva, F.J.G.; Campilho, R.D.S.G.; Ferreira, L.P.. "A novel concept of Bowden cables flexible and full-automated
manufacturing process improving quality and productivity". Procedia Manufacturing 51 (2020): 438-445. http://dx.doi.org/10.1016/j.promfg.2020.10.062.
10.1016/j.promfg.2020.10.062
- Baptista, A.; Silva, F.J.G.; Campilho, R.D.S.G.; Ferreira, S.; Pinto, G.. "Applying DMADV on the industrialization of updated
components in the automotive sector: a case study". Procedia Manufacturing 51 (2020): 1332-1339. http://dx.doi.org/10.1016/j.promfg.2020.10.186.
10.1016/j.promfg.2020.10.186
- Silva, F.J.G.; Morgado, Luísa; Teixeira, A.; Sá, J.C.; Ferreira, L.P.; Almeida, Fátima de. "Analysis and Development of a
Failure Prediction Model for Electrical Terminals Used in the Automotive Industry". Procedia Manufacturing 51 (2020):
207-214. http://dx.doi.org/10.1016/j.promfg.2020.10.030.
10.1016/j.promfg.2020.10.030
- Pinto, G.; Silva, F.J.G.; Baptista, A.; Fernandes, Nuno O.; Casais, R.; Carvalho, C.. "TPM implementation and maintenance
strategic plan – a case study". Procedia Manufacturing 51 (2020): 1423-1430. http://dx.doi.org/10.1016/j.promfg.2020.10.198.
10.1016/j.promfg.2020.10.198
- Ferreira, C.; Silva, F.J.G.; Campilho, R.D.S.G.; Fecheira, J.S.. "Study of the kinematics of a high-course steering system".
Procedia Manufacturing 51 (2020): 164-170. http://dx.doi.org/10.1016/j.promfg.2020.10.024.
10.1016/j.promfg.2020.10.024
- Figueiredo, D.; Silva, F.J.G.; Campilho, R.D.S.G.; Silva, A.; Pimentel, C.; Matias, J.C.O.. "A new concept of automated manufacturing
process for wire rope terminals". Procedia Manufacturing 51 (2020): 431-437. http://dx.doi.org/10.1016/j.promfg.2020.10.061.
10.1016/j.promfg.2020.10.061
- Pinto, G.; Silva, F.J.G.; Baptista, A.; Fecheira, J.S.; Campilho, R.D.S.G.; Viana, F.. "Studying the ZnO formation in coated
steel wire ropes for the automotive industry". Procedia Manufacturing 51 (2020): 912-919. http://dx.doi.org/10.1016/j.promfg.2020.10.128.
10.1016/j.promfg.2020.10.128
- Silva, F.J.G.; Swertvaegher, G.; Campilho, R.D.S.G.; Ferreira, L.P.; Sá, J.C.. "Robotized solution for handling complex automotive
parts in inspection and packing". Procedia Manufacturing 51 (2020): 156-163. http://dx.doi.org/10.1016/j.promfg.2020.10.023.
10.1016/j.promfg.2020.10.023
- Freitas, F.; Silva, F.J.G.; Campilho, R.D.S.G.; Pimentel, C.; Godina, R.. "Development of a suitable project management approach
for projects with parallel planning and execution". Procedia Manufacturing 51 (2020): 1544-1550. http://dx.doi.org/10.1016/j.promfg.2020.10.215.
10.1016/j.promfg.2020.10.215
- Rodrigues, H.; Silva, F.J.G.; Morgado, L.G.; Sá, J.C.; Ferreira, L.P.; Campilho, R.D.S.G.. "A novel computer application for
scrap reporting and data management in the manufacturing of components for the automotive industry". Procedia Manufacturing
51 (2020): 1319-1326. http://dx.doi.org/10.1016/j.promfg.2020.10.184.
10.1016/j.promfg.2020.10.184
- Martins, L.; Silva, F.J.G.; Pimentel, C.; Casais, R.B.; Campilho, R.D.S.G.. "Improving Preventive Maintenance Management in
an Energy Solutions Company". Procedia Manufacturing 51 (2020): 1551-1558. http://dx.doi.org/10.1016/j.promfg.2020.10.216.
10.1016/j.promfg.2020.10.216
- Vieira, A.M.; Silva, F.J.G.; Campilho, R.D.S.G.; Ferreira, L.P.; Sá, J.C.; Pereira, T.. "SMED methodology applied to the deep
drawing process in the automotive industry". Procedia Manufacturing 51 (2020): 1416-1422. http://dx.doi.org/10.1016/j.promfg.2020.10.197.
10.1016/j.promfg.2020.10.197
- Lopes, R.; Silva, F.J.G.; Godina, R.; Campilho, R.; Dieguez, T.; Ferreira, L.P.; Baptista, A.. "Reducing scrap and improving
an air conditioning pipe production line". Procedia Manufacturing 51 (2020): 1410-1415. http://dx.doi.org/10.1016/j.promfg.2020.10.196.
10.1016/j.promfg.2020.10.196
- Costa, S.; Silva, F.J.G.; Campilho, R.D.S.G.; Pereira, T.. "Guidelines for Machine Tool Sensing and Smart Manufacturing Integration".
Procedia Manufacturing 51 (2020): 251-257. http://dx.doi.org/10.1016/j.promfg.2020.10.036.
10.1016/j.promfg.2020.10.036
- Sousa, V.; Silva, F.J.G.; Fecheira, J.S.; Campilho, R.D.S.G.; Vandermeulen, V.. "A Novel Modular Design of an Equipment to
Produce “T”-Profiles by Laser Welding". Procedia Manufacturing 51 (2020): 446-453. http://dx.doi.org/10.1016/j.promfg.2020.10.063.
10.1016/j.promfg.2020.10.063
- Sousa, V.; Silva, F.J.G.; Fecheira, J.S.; Lopes, H.M.; Martinho, R.P.; Casais, R.B.. "Accessing the cutting forces in machining
processes: An overview". Procedia Manufacturing 51 (2020): 787-794. http://dx.doi.org/10.1016/j.promfg.2020.10.110.
10.1016/j.promfg.2020.10.110
- Ferreira, S.; Martins, L.; Silva, F.J.G.; Casais, R.B.; Campilho, R.D.S.G.; Sá, J.C.. "A novel approach to improve maintenance
operations". Procedia Manufacturing 51 (2020): 1531-1537. http://dx.doi.org/10.1016/j.promfg.2020.10.213.
10.1016/j.promfg.2020.10.213
- Dieguez, Teresa; Corcetti, L.; Silva, F.J.G.; Campilho, R.D.S.G.; Ferreira, L.P.. "How can technology on the automotive industry
save the future?". Procedia Manufacturing 51 (2020): 1763-1772. http://dx.doi.org/10.1016/j.promfg.2020.10.245.
10.1016/j.promfg.2020.10.245
- Dieguez, Teresa; Ferreira, Luís Pinto; Silva, F.J.G.; Tjahjono, Benny. "Open Innovation and Sustainable Development through
Industry-Academia Collaboration: A Case Study of Automotive Sector". Procedia Manufacturing 51 (2020): 1773-1778. http://dx.doi.org/10.1016/j.promfg.2020.10.246.
10.1016/j.promfg.2020.10.246
- Pena, R.; Ferreira, L.P.; Silva, F.J.G.; Sá, J.C.; Fernandes, N.O.; Pereira, T.. "Lean manufacturing applied to a wiring production
process". Procedia Manufacturing 51 (2020): 1387-1394. http://dx.doi.org/10.1016/j.promfg.2020.10.193.
10.1016/j.promfg.2020.10.193
- Fernandes, Nuno O.; Thürer, Matthias; Mirzaei, Nima; Ferreira, Luis Pinto; Silva, Francisco J.G.; Carmo-Silva, Sílvio. "POLCA
Control in Two-Stage Production Systems". Procedia Manufacturing 51 (2020): 1491-1496. http://dx.doi.org/10.1016/j.promfg.2020.10.207.
10.1016/j.promfg.2020.10.207
- Cardoso, M.G.; Pinto, J.E.C.; Campilho, R.D.S.G.; Nóvoa, P.J.R.O.; Silva, F.J.G.; Ramalho, L.D.C.. "A new structural two-component
epoxy adhesive: Strength and fracture characterization". Procedia Manufacturing 51 (2020): 771-778. http://dx.doi.org/10.1016/j.promfg.2020.10.108.
10.1016/j.promfg.2020.10.108
- Brito, M.; Vale, M.; Leão, J.; Ferreira, L.P.; Silva, F.J.G.; Gonçalves, M.A.. "Lean and Ergonomics decision support tool
assessment in a plastic packaging company". Procedia Manufacturing 51 (2020): 613-619. http://dx.doi.org/10.1016/j.promfg.2020.10.086.
10.1016/j.promfg.2020.10.086
- Pereira, T.; Neves, A.S.L.; Silva, F.J.G.; Godina, R.; Morgado, L.; Pinto, G.F.L.. "Production Process Analysis and Improvement
of Corrugated Cardboard Industry". Procedia Manufacturing 51 (2020): 1395-1402. http://dx.doi.org/10.1016/j.promfg.2020.10.194.
10.1016/j.promfg.2020.10.194
- Ferreira, J.A.M.; Campilho, R.D.S.G.; Cardoso, M.G.; Silva, F.J.G.. "Numerical simulation of adhesively-bonded T-stiffeners
by cohesive zone models". Procedia Manufacturing 51 (2020): 870-877. http://dx.doi.org/10.1016/j.promfg.2020.10.122.
10.1016/j.promfg.2020.10.122
- Ramalho, L.D.C.; Sánchez-Arce, I.J.; Campilho, R.D.S.G.; Belinha, J.A.O.P.; Silva, F.J.G.. "Strength prediction and stress
analysis of adhesively bonded composite joints using meshless methods". Procedia Manufacturing 51 (2020): 904-911.
http://dx.doi.org/10.1016/j.promfg.2020.10.127.
10.1016/j.promfg.2020.10.127
- Alves, Diogo; Ferreira, L.P.; Pereira, T.; Sá, J.C.; Silva, F.J.G.; Fernandes, N.O.. "Analysis and Improvement of the Packaging
Sector of an Industrial Company". Procedia Manufacturing 51 (2020): 1327-1331. http://dx.doi.org/10.1016/j.promfg.2020.10.185.
10.1016/j.promfg.2020.10.185
- Moreira, F.J.P.; Campilho, R.D.S.G.; Cardoso, M.G.; Silva, F.J.G.. "Evaluation of T-joints in aluminium structures under different
geometries". Procedia Manufacturing 51 (2020): 848-855. http://dx.doi.org/10.1016/j.promfg.2020.10.119.
10.1016/j.promfg.2020.10.119
- Silva, A.; Sá, J.C.; Santos, G.; Silva, F.J.G.; Ferreira, L.P.; Pereira, M.T.. "Implementation of SMED in a cutting line".
Procedia Manufacturing 51 (2020): 1355-1362. http://dx.doi.org/10.1016/j.promfg.2020.10.189.
10.1016/j.promfg.2020.10.189
- Silva, Francisco. "Lean Management “Quick-Wins”: Results of Implementation. A Case Study". Quality Innovation Prosperity
(2019): http://dx.doi.org/10.12776/qip.v23i3.1291.
10.12776/qip.v23i3.1291
- Rafael Barros; Francisco J. G. Silva; Ronny M. Gouveia; Abdollah Saboori; Giulio Marchese; Sara Biamino; Alessandro Salmi;
et al. "Laser Powder Bed Fusion of Inconel 718: Residual Stress Analysis Before and After Heat Treatment". Metals (2019):
https://doi.org/10.3390/met9121290.
10.3390/met9121290
- Ashwin Sivam; Teresa Dieguez; Luís Pinto Ferreira; F.J.G. Silva; Sivam, Ashwin; Dieguez, Teresa; Ferreira, Luis Pinto; Silva,
F. J. G.. "Key settings for successful Open Innovation Arena". Journal of Computational Design and Engineering 6 4
(2019): 507-515. https://doi.org/10.1016/j.jcde.2019.03.005.
10.1016/j.jcde.2019.03.005
- Francisco Silva; Rui Martinho; Carlos Martins; Hernâni Lopes; Ronny Gouveia. "Machining GX2CrNiMoN26-7-4 DSS Alloy: Wear Analysis
of TiAlN and TiCN/Al2O3/TiN Coated Carbide Tools Behavior in Rough End Milling Operations". Coatings (2019): https://doi.org/10.3390/coatings9060392.
10.3390/coatings9060392
- R. P. Martinho; F. J. G. Silva; C. Martins; H. Lopes; Martinho, R. P.; Silva, F. J. G.; Martins, C.; Lopes, H.. "Comparative
study of PVD and CVD cutting tools performance in milling of duplex stainless steel". The International Journal of Advanced
Manufacturing Technology 102 5-8 (2019): 2423-2439. https://doi.org/10.1007/s00170-019-03351-8.
10.1007/s00170-019-03351-8
- Liliana Fernandes; F. J. G. Silva; Ricardo Alexandre; Fernandes, Liliana; Silva, Francisco J. G.; Alexandre, Ricardo. "Study
of TiAlN PVD Coating on Stamping Dies Used in Tinplate Food Package Production". Micromachines (2019): https://www.mdpi.com/2072-666X/10/3/182.
10.3390/mi10030182
- Silva, Francisco; Magalhaes, A. J. A.; Silva, F. J. G.; Campilho, R. D. S. G.. "A novel concept of bent wires sorting operation
between workstations in the production of automotive parts". Journal of the Brazilian Society of Mechanical Sciences and
Engineering (2019): http://dx.doi.org/10.1007/s40430-018-1522-9.
10.1007/s40430-018-1522-9
- Silva, Francisco. "Application of the A3 Methodology for the Improvement of an Assembly Line". Procedia Manufacturing
(2019): http://dx.doi.org/10.1016/j.promfg.2020.01.101.
10.1016/j.promfg.2020.01.101
- Silva, Francisco. "A novel concept of a conduit transport system". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.166.
10.1016/j.promfg.2020.01.166
- Silva, Francisco. "Eco-Design and Sustainability in Packaging: A Survey". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.097.
10.1016/j.promfg.2020.01.097
- Silva, Francisco. "Intralogistics and industry 4.0: designing a novel shuttle with picking system". Procedia Manufacturing
(2019): http://dx.doi.org/10.1016/j.promfg.2020.01.078.
10.1016/j.promfg.2020.01.078
- Silva, Francisco. "Implementation of Lean Methodologies in the Management of Consumable Materials in the Maintenance Workshops
of an Industrial Company". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.181.
10.1016/j.promfg.2020.01.181
- Silva, Francisco. "Analysis and Improvement of an Assembly Line in the Automotive Industry". Procedia Manufacturing
(2019): http://dx.doi.org/10.1016/j.promfg.2020.01.143.
10.1016/j.promfg.2020.01.143
- Silva, Francisco. "Improving the Cut Surface Quality by Optimizing Parameters in the Fibre Laser Cutting Process". Procedia
Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.199.
10.1016/j.promfg.2020.01.199
- Silva, Francisco. "A comprehensive supplier classification model for SME outsourcing". Procedia Manufacturing (2019):
http://dx.doi.org/10.1016/j.promfg.2020.01.141.
10.1016/j.promfg.2020.01.141
- Silva, Francisco. "Reduction of scrap percentage of cast parts by optimizing the process parameters". Procedia Manufacturing
(2019): http://dx.doi.org/10.1016/j.promfg.2020.01.191.
10.1016/j.promfg.2020.01.191
- Silva, Francisco. "Evaluation of the extended finite element method for the analysis of bonded joints with different geometries".
Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.035.
10.1016/j.promfg.2020.01.035
- Silva, Francisco. "A DMS to Support Industrial Process Decision-Making: a contribution under Industry 4.0". Procedia Manufacturing
(2019): http://dx.doi.org/10.1016/j.promfg.2020.01.079.
10.1016/j.promfg.2020.01.079
- Silva, Francisco. "Implementing TPM supported by 5S to improve the availability of an automotive production line". Procedia
Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.128.
10.1016/j.promfg.2020.01.128
- Silva, Francisco. "Using Six Sigma to analyse Customer Satisfaction at the product design and development stage". Procedia
Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.124.
10.1016/j.promfg.2020.01.124
- Silva, Francisco. "Comparison of different test configurations for the shear fracture toughness evaluation of a ductile adhesive".
Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.177.
10.1016/j.promfg.2020.01.177
- Silva, F.J.G.; Martinho, R.P.; Martins, C.; Lopes, H.; Gouveia, R.M.. "Machining GX2CrNiMoN26-7-4 DSS alloy: Wear analysis
of TiAlN and TiCN/Al2O3/TiN coated carbide tools behavior in rough end milling operations". Coatings
9 6 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85069781612&partnerID=MN8TOARS.
10.3390/COATINGS9060392
- Silva, Francisco. "A TPM strategy implementation in an automotive production line through loss reduction". Procedia Manufacturing
(2019): http://dx.doi.org/10.1016/j.promfg.2020.01.173.
10.1016/j.promfg.2020.01.173
- Silva, Francisco. "Design of a modular solution for an autonomous vehicle for cargo transport and handling". Procedia Manufacturing
(2019): http://dx.doi.org/10.1016/j.promfg.2020.01.183.
10.1016/j.promfg.2020.01.183
- Silva, Francisco. "Design of automated equipment for the assembly of automotive parts". Procedia Manufacturing (2019):
http://dx.doi.org/10.1016/j.promfg.2020.01.158.
10.1016/j.promfg.2020.01.158
- Silva, Francisco. "Improving efficiency in a hybrid warehouse: a case study". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.195.
10.1016/j.promfg.2020.01.195
- Silva, Francisco. "Order fulfilment process improvement in a ceramic industry". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.144.
10.1016/j.promfg.2020.01.144
- Silva, Francisco. "Improving the Machining Process of the Metalwork Industry by Upgrading Operative Sequences, Standard Manufacturing
Times and Production Procedure Changes". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.106.
10.1016/j.promfg.2020.01.106
- Silva, Francisco. "Comparative evaluation of different fracture tests for the tensile fracture toughness of a ductile adhesive".
Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.221.
10.1016/j.promfg.2020.01.221
- Silva, Francisco. "Influence of textile cord tension in cap ply production". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.090.
10.1016/j.promfg.2020.01.090
- Silva, Francisco. "Designing a Novel System for the Introduction of Lubricant in Control Cables for the Automotive Industry".
Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.096.
10.1016/j.promfg.2020.01.096
- Silva, Francisco. "Effect of material hybridization on the strength of scarf adhesive joints". Procedia Manufacturing
(2019): http://dx.doi.org/10.1016/j.promfg.2020.01.216.
10.1016/j.promfg.2020.01.216
- Silva, Francisco. "Comparative evaluation of adhesively-bonded single-lap and stepped-lap joints". Procedia Manufacturing
(2019): http://dx.doi.org/10.1016/j.promfg.2020.01.209.
10.1016/j.promfg.2020.01.209
- Silva, Francisco. "A Strategic Model to take the First Step Towards Industry 4.0 in SMEs". Procedia Manufacturing (2019):
http://dx.doi.org/10.1016/j.promfg.2020.01.082.
10.1016/j.promfg.2020.01.082
- Silva, Francisco. "Localization System for Optimization of Picking in a Manual Warehouse". Procedia Manufacturing (2019):
http://dx.doi.org/10.1016/j.promfg.2020.01.213.
10.1016/j.promfg.2020.01.213
- Rodrigues, J.; de Sá, J.C.V.; Ferreira, L.P.; Silva, F.J.G.; Santos, G.. "Lean management “quick-wins”: Results of implementation.
A case study". Quality Innovation Prosperity 23 3 (2019): 3-21. http://www.scopus.com/inward/record.url?eid=2-s2.0-85078659939&partnerID=MN8TOARS.
10.12776/QIP.V23I3.1291
- Silva, Francisco. "Rethinking modular jigs’ design regarding the optimization of machining times". Procedia Manufacturing
(2019): http://dx.doi.org/10.1016/j.promfg.2020.01.169.
10.1016/j.promfg.2020.01.169
- Silva, Francisco. "Improvement and validation of Zamak die casting moulds". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.131.
10.1016/j.promfg.2020.01.131
- Silva, Francisco. "Fracture envelope estimation of a structural adhesive by dedicated fracture tests". Procedia Manufacturing
(2019): http://dx.doi.org/10.1016/j.promfg.2020.01.217.
10.1016/j.promfg.2020.01.217
- Silva, Francisco. "Improving In-Plant Logistics Flow by Physical and Digital Pathways". Procedia Manufacturing (2019):
http://dx.doi.org/10.1016/j.promfg.2020.01.180.
10.1016/j.promfg.2020.01.180
- Silva, Francisco. "KPI development and obsolescence management in industrial maintenance". Procedia Manufacturing (2019):
http://dx.doi.org/10.1016/j.promfg.2020.01.145.
10.1016/j.promfg.2020.01.145
- Silva, Francisco. "Influence of the natural additive on natural fiber reinforced thermoplastic composite". Procedia Manufacturing
(2019): http://dx.doi.org/10.1016/j.promfg.2020.01.200.
10.1016/j.promfg.2020.01.200
- Silva, Francisco. "Scrap production of extruded aluminum alloys by direct extrusion". Procedia Manufacturing (2019):
http://dx.doi.org/10.1016/j.promfg.2020.01.100.
10.1016/j.promfg.2020.01.100
- Silva, Francisco. "Rheological Behaviour of PP Nanocomposites by Extrusion Process". Procedia Manufacturing (2019):
http://dx.doi.org/10.1016/j.promfg.2020.01.135.
10.1016/j.promfg.2020.01.135
- Silva, Francisco. "Mapping Occupational Health and Safety Management Systems in Portugal: outlook for ISO 45001:2018 adoption".
Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.103.
10.1016/j.promfg.2020.01.103
- Silva, Francisco. "Static strength improvement of tubular aluminium adhesive joints by the outer chamfering technique". Procedia
Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.081.
10.1016/j.promfg.2020.01.081
- Silva, Francisco. "Asset Priority Setting for Maintenance Management in the Food Industry". Procedia Manufacturing
(2019): http://dx.doi.org/10.1016/j.promfg.2020.01.122.
10.1016/j.promfg.2020.01.122
- Silva, Francisco. "Optimization of the cold profiling process through SMED". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.171.
10.1016/j.promfg.2020.01.171
- Silva, Francisco. "Continuous improvement in maintenance: a case study in the automotive industry involving Lean tools". Procedia
Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.127.
10.1016/j.promfg.2020.01.127
- Silva, Francisco. "Designing a novel and greener truck asphalt container". Procedia Manufacturing (2019): http://dx.doi.org/10.1016/j.promfg.2020.01.042.
10.1016/j.promfg.2020.01.042
- Silva, Francisco. "Comparison of different adhesively-bonded joint types for mechanical structures". Applied Adhesion Science
(2018): http://dx.doi.org/10.1186/s40563-018-0116-1.
10.1186/s40563-018-0116-1
- Silva, Francisco. "Application a direct/cohesive zone method for the evaluation of scarf adhesive joints". Applied Adhesion
Science (2018): http://dx.doi.org/10.1186/s40563-018-0115-2.
10.1186/s40563-018-0115-2
- Gustavo Filipe Pinto; F. J. G. Silva; Jacobo Porteiro; José Míguez; Andresa Baptista; Pinto, G.; Silva, F.; et al. "Numerical
Simulation Applied to PVD Reactors: An Overview". Coatings 8 11 (2018): http://www.mdpi.com/2079-6412/8/11/410.
10.3390/coatings8110410
- Andresa Baptista; F. J. G. Silva; Jacobo Porteiro; José Míguez; Gustavo Filipe Pinto. "Sputtering Physical Vapour Deposition
(PVD) Coatings: A Critical Review on Process Improvement and Market Trend Demands". Coatings (2018): http://www.mdpi.com/2079-6412/8/11/402.
10.3390/coatings8110402
- Silva, Francisco. "Comparison between the ENF and 4ENF fracture characterization tests to evaluate GIIC of bonded aluminium
joints". The Journal of Adhesion (2018): http://dx.doi.org/10.1080/00218464.2017.1387056.
10.1080/00218464.2017.1387056
- Silva, Francisco. "Numerical assessment of the Double-Cantilever Beam and Tapered Double-Cantilever Beam tests for the GIC
determination of adhesive layers". The Journal of Adhesion (2018): http://dx.doi.org/10.1080/00218464.2017.1383905.
10.1080/00218464.2017.1383905
- Silva, Francisco; Alves, D. L.; Campilho, R. D. S. G.; Moreira, R. D. F.; Silva, F. J. G.; da Silva, L. F. M.. "Experimental
and numerical analysis of hybrid adhesively-bonded scarf joints". International Journal of Adhesion and Adhesives (2018):
http://dx.doi.org/10.1016/j.ijadhadh.2018.05.011.
10.1016/j.ijadhadh.2018.05.011
- Silva, Francisco. "Strength prediction of T-peel joints by a hybrid spot-welding/adhesive bonding technique". The Journal
of Adhesion (2018): http://dx.doi.org/10.1080/00218464.2016.1244013.
10.1080/00218464.2016.1244013
- Silva, Francisco; Marcelo de Moura; M. J. R. Costa; R. M. Gouveia; F. J. G. Silva; R. D. S. G. Campilho. "How to solve quality
problems by advanced fully-automated manufacturing systems". The International Journal of Advanced Manufacturing Technology
(2018): http://dx.doi.org/10.1007/s00170-017-0158-8.
10.1007/s00170-017-0158-8
- Silva, Francisco; Gouveia, Ronny M.; Silva, Francisco J. G.; Paiva, Olga C.; Andrade, Maria de Fatima; Pereira, Lucas Augusto;
Moselli, Paulo Cezar; et al. "Comparing the Structure and Mechanical Properties of Welds on Ductile Cast Iron (700 MPa) under
Different Heat Treatment Conditions". Metals (2018): http://www.mdpi.com/2075-4701/8/1/72.
10.3390/met8010072
- Silva, Francisco. "Study On The Optimization Of TheTextile Coloristic Performance Of The Bleaching Process Using Pad-Steam".
Procedia Manufacturing (2018): http://dx.doi.org/10.1016/j.promfg.2018.10.126.
10.1016/j.promfg.2018.10.126
- Baptista, A.; Silva, F.; Porteiro, J.; Míguez, J.; Pinto, G.. "Sputtering physical vapour deposition (PVD) coatings: A critical
review on process improvement andmarket trend demands". Coatings 8 11 (2018): http://www.scopus.com/inward/record.url?eid=2-s2.0-85069778306&partnerID=MN8TOARS.
10.3390/COATINGS8110402
- Silva, Francisco. "Improving manual assembly lines devoted to complex electronic devices by applying Lean tools". Procedia
Manufacturing (2018): http://dx.doi.org/10.1016/j.promfg.2018.10.115.
10.1016/j.promfg.2018.10.115
- Silva, Francisco. "Investigations on the edge crack defect in Dual Phase steel stamping process". Procedia Manufacturing
(2018): http://dx.doi.org/10.1016/j.promfg.2018.10.124.
10.1016/j.promfg.2018.10.124
- Silva, Francisco. "Designing a Novel Feeding System for CNC Turning Machines". Procedia Manufacturing (2018): http://dx.doi.org/10.1016/j.promfg.2018.10.020.
10.1016/j.promfg.2018.10.020
- Silva, Francisco. "Development of hydraulic clamping tools for the machining of complex shape mechanical components". Procedia
Manufacturing (2018): http://dx.doi.org/10.1016/j.promfg.2018.10.097.
10.1016/j.promfg.2018.10.097
- Silva, Francisco. "Design of a novel equipment for automated clothing manufacturing". Procedia Manufacturing (2018):
http://dx.doi.org/10.1016/j.promfg.2018.10.127.
10.1016/j.promfg.2018.10.127
- Silva, Francisco. "A critical review on the numerical simulation related to Physical Vapour Deposition". Procedia Manufacturing
(2018): http://dx.doi.org/10.1016/j.promfg.2018.10.138.
10.1016/j.promfg.2018.10.138
- Silva, Francisco. "A Novel Concept of CNC Machining Center Automatic Feeder". Procedia Manufacturing (2018): http://dx.doi.org/10.1016/j.promfg.2018.10.111.
10.1016/j.promfg.2018.10.111
- Silva, Francisco. "Experimental and numerical analysis of scarf aluminum adhesive joints". Procedia Manufacturing (2018):
http://dx.doi.org/10.1016/j.promfg.2018.10.120.
10.1016/j.promfg.2018.10.120
- Silva, Francisco. "A Practical Study of the Application of SMED to Electron-beam Machining in Automotive Industry". Procedia
Manufacturing (2018): http://dx.doi.org/10.1016/j.promfg.2018.10.113.
10.1016/j.promfg.2018.10.113
- Silva, Francisco. "A codification system roadmap: case study in a metalworking company". Procedia Manufacturing (2018):
http://dx.doi.org/10.1016/j.promfg.2018.10.118.
10.1016/j.promfg.2018.10.118
- Silva, Francisco. "Development of a numerical methodology for strength prediction of weld-bonded joints". Procedia Manufacturing
(2018): http://dx.doi.org/10.1016/j.promfg.2018.10.121.
10.1016/j.promfg.2018.10.121
- Silva, Francisco. "Applying SMED methodology in cork stoppers production". Procedia Manufacturing (2018): http://dx.doi.org/10.1016/j.promfg.2018.10.103.
10.1016/j.promfg.2018.10.103
- Silva, Francisco. "A Strategy to Reinforce the Textile and Clothing Sector Cluster in Portugal". Advances in Transdisciplinary
Engineering (2018): http://doi.org/10.3233/978-1-61499-898-3-459.
10.3233/978-1-61499-898-3-459
- Silva, Francisco. "Establishing Standard Methodologies To Improve The Production Rate Of Assembly Lines Used For Low Added-Value
Products". Procedia Manufacturing (2018): http://dx.doi.org/10.1016/j.promfg.2018.10.096.
10.1016/j.promfg.2018.10.096
- Silva, Francisco. "Injection mold design for a plastic component with blowing agent". Procedia Manufacturing (2018):
http://dx.doi.org/10.1016/j.promfg.2018.10.128.
10.1016/j.promfg.2018.10.128
- Silva, Francisco. "Establishing Guidelines to Improve the High-Pressure Die Casting Process of Complex Aesthetics Parts".
Advances in Transdisciplinary Engineering (2018): http://doi.org/10.3233/978-1-61499-898-3-887.
10.3233/978-1-61499-898-3-887
- Silva, Francisco. "Compatibilization effect of organophilic clays in PA6/PP polymer blend". Procedia Manufacturing
(2018): http://dx.doi.org/10.1016/j.promfg.2018.10.016.
10.1016/j.promfg.2018.10.016
- Silva, Francisco. "Modelling Stepped-Lap Adhesive Joints by the Extended Finite Element Method". Advances in Transdisciplinary
Engineering (2018): http://doi.org/10.3233/978-1-61499-898-3-684.
10.3233/978-1-61499-898-3-684
- Silva, Francisco. "Minimizing the Adhesion Effects in Food Packages Forming by the Use of Advanced Coatings". Procedia
Manufacturing (2018): http://dx.doi.org/10.1016/j.promfg.2018.10.141.
10.1016/j.promfg.2018.10.141
- Silva, Francisco. "A Novel Approach to Optimize the Design of Parts for Additive Manufacturing". Procedia Manufacturing
(2018): http://dx.doi.org/10.1016/j.promfg.2018.10.012.
10.1016/j.promfg.2018.10.012
- Silva, Francisco. "Improving the Multi-Brand Channel Distribution of a Fashion Retailer". Procedia Manufacturing (2018):
http://dx.doi.org/10.1016/j.promfg.2018.10.114.
10.1016/j.promfg.2018.10.114
- Silva, F. J. G.; Baptista, A.; Pinto, G.; Campilho, R. D. S. G.; Ribeiro, M. C. S.; Silva, Francisco. "Characterization of
hybrid pultruded structural products based on preforms". Composites Part B: Engineering (2018): https://publons.com/publon/14401628/.
10.1016/J.COMPOSITESB.2017.12.019
- Silva, Francisco. "A Structural Literature Review of the Single Minute Exchange of Die: The Latest Trends". Procedia Manufacturing
(2018): http://dx.doi.org/10.1016/j.promfg.2018.10.129.
10.1016/j.promfg.2018.10.129
- Silva, Francisco. "A Novel Rework Costing Methodology Applied To a Bus Manufacturing Company". Procedia Manufacturing
(2018): http://dx.doi.org/10.1016/j.promfg.2018.10.109.
10.1016/j.promfg.2018.10.109
- Silva, Francisco. "Improvement of the Statistical Process Control Certainty in an Automotive Manufacturing Unit". Procedia
Manufacturing (2018): http://dx.doi.org/10.1016/j.promfg.2018.10.123.
10.1016/j.promfg.2018.10.123
- Silva, Francisco. "On the Physical Vapour Deposition (PVD): Evolution of Magnetron Sputtering Processes for Industrial Applications".
Procedia Manufacturing (2018): http://dx.doi.org/10.1016/j.promfg.2018.10.125.
10.1016/j.promfg.2018.10.125
- Silva, Francisco. "Implementing Lean Tools in the Manufacturing Process of Trimmings Products". Procedia Manufacturing
(2018): http://dx.doi.org/10.1016/j.promfg.2018.10.119.
10.1016/j.promfg.2018.10.119
- Silva, Francisco. "Analysis and Improvement of Processes in the Jewelry Industry". Procedia Manufacturing (2018): http://dx.doi.org/10.1016/j.promfg.2018.10.110.
10.1016/j.promfg.2018.10.110
- Silva, Francisco. "Cost reduction and quality improvements in the printing industry". Procedia Manufacturing (2018):
http://dx.doi.org/10.1016/j.promfg.2018.10.107.
10.1016/j.promfg.2018.10.107
- Silva, Francisco. "The Improvement of an APEX Machine involved in the Tire Manufacturing Process". Procedia Manufacturing
(2018): http://dx.doi.org/10.1016/j.promfg.2018.10.098.
10.1016/j.promfg.2018.10.098
- Silva, Francisco. "Increasing the lifespan of high-pressure die cast molds subjected to severe wear". Surface and Coatings
Technology (2017): http://dx.doi.org/10.1016/j.surfcoat.2017.05.098.
10.1016/j.surfcoat.2017.05.098
- Silva, Francisco. "Improving the punch and die wear behavior in tin coated steel stamping process". Surface and Coatings
Technology (2017): http://dx.doi.org/10.1016/j.surfcoat.2017.06.086.
10.1016/j.surfcoat.2017.06.086
- Silva, Francisco; Jorge Santos; Ronny M. Gouveia; Francisco J. Gomes da Silva. "Designing a new sustainable approach to the
change for lightweight materials in structural components used in truck industry". Journal of Cleaner Production (2017):
http://dx.doi.org/10.1016/j.jclepro.2017.06.174.
10.1016/j.jclepro.2017.06.174
- Ronny Gouveia; Francisco Silva; Olga Paiva; Maria Andrade; Luiz Silva; Paulo Moselli; Konrad Papis. "Study of the Heat-Treatments
Effect on High Strength Ductile Cast Iron Welded Joints". Metals 7 9 (2017): 382-382. https://doi.org/10.3390/met7090382.
10.3390/met7090382
- Silva, Francisco. "Increasing the stamping tools lifespan by using Mo and B 4 C PVD coatings". Surface and Coatings Technology
(2017): http://dx.doi.org/10.1016/j.surfcoat.2017.06.043.
10.1016/j.surfcoat.2017.06.043
- Silva, Francisco; Francisco J. Gomes da Silva; Jorge Santos; Ronny Gouveia. "Dissolution of Grain Boundary Carbides by the
Effect of Solution Annealing Heat Treatment and Aging Treatment on Heat-Resistant Cast Steel HK30". Metals (2017):
http://www.mdpi.com/2075-4701/7/7/251.
10.3390/met7070251
- F.J.G. Silva; E. Amorim; A. Baptista; G. Pinto; R.D.S.G. Campilho; M.R.A. Castro; Andresa Baptista. "Producing hybrid pultruded
structural products based on preforms". Composites Part B: Engineering 116 (2017): 325-332. https://doi.org/10.1016/j.compositesb.2016.10.070.
10.1016/j.compositesb.2016.10.070
- Silva, Francisco; L.M.B. Araújo; Francisco J. Gomes da Silva; R.D.S.G. Campilho; J.A. Matos. "A novel dynamic holding system
for thin metal plate shearing machines". Robotics and Computer Integrated Manufacturing (2017): http://dx.doi.org/10.1016/j.rcim.2016.06.006.
10.1016/j.rcim.2016.06.006
- Silva, Francisco. "Strength and Fracture Characterization of a Novel Polyurethane Adhesive for the Automotive Industry". Journal
of Testing and Evaluation (2017): http://dx.doi.org/10.1520/jte20150335.
10.1520/jte20150335
- Francisco Silva; Rui Martinho; Maria Andrade; António Baptista; Ricardo Alexandre. "Improving the Wear Resistance of Moulds
for the Injection of Glass Fibre–Reinforced Plastics Using PVD Coatings: A Comparative Study". Coatings 7 12 (2017):
28-28. https://doi.org/10.3390/coatings7020028.
10.3390/coatings7020028
- Silva, Francisco. "Shear fracture toughness and cohesive laws of adhesively-bonded joints". Ciência & Tecnologia dos Materiais
(2017): http://dx.doi.org/10.1016/j.ctmat.2016.05.003.
10.1016/j.ctmat.2016.05.003
- Silva, Francisco. "Optimisation of Die Casting Process in Zamak Alloys". Procedia Manufacturing (2017): http://dx.doi.org/10.1016/j.promfg.2017.07.145.
10.1016/j.promfg.2017.07.145
- Silva, Francisco. "Implementing autonomous maintenance in an automotive components manufacturer". Procedia Manufacturing
(2017): http://dx.doi.org/10.1016/j.promfg.2017.09.174.
10.1016/j.promfg.2017.09.174
- Silva, Francisco. "Improving the Quality and Productivity of Steel Wire-rope Assembly Lines for the Automotive Industry".
Procedia Manufacturing (2017): http://dx.doi.org/10.1016/j.promfg.2017.07.214.
10.1016/j.promfg.2017.07.214
- Silva, Francisco. "Designing a Robotic Welding Cell for Bus Body Frame Using a Sustainable Way". Procedia Manufacturing
(2017): http://dx.doi.org/10.1016/j.promfg.2017.07.225.
10.1016/j.promfg.2017.07.225
- Silva, Francisco. "Solving Quality Problems in Tyre Production Preparation Process: A Practical Approach". Procedia Manufacturing
(2017): http://dx.doi.org/10.1016/j.promfg.2017.07.250.
10.1016/j.promfg.2017.07.250
- Silva, Francisco. "Optimising a Specific Tool for Electrical Terminals Crimping Process". Procedia Manufacturing (2017):
http://dx.doi.org/10.1016/j.promfg.2017.07.274.
10.1016/j.promfg.2017.07.274
- Silva, Francisco. "Dust in Lacquer, Evidence of Deviation of Process in Production Lines for Spray Painting". Procedia
Manufacturing (2017): http://dx.doi.org/10.1016/j.promfg.2017.07.166.
10.1016/j.promfg.2017.07.166
- Silva, Francisco. "Analysis and optimisation of a logistic warehouse in the automotive industry". Procedia Manufacturing
(2017): http://dx.doi.org/10.1016/j.promfg.2017.09.170.
10.1016/j.promfg.2017.09.170
- Silva, Francisco. "Standardization and optimization of an automotive components production line". Procedia Manufacturing
(2017): http://dx.doi.org/10.1016/j.promfg.2017.09.173.
10.1016/j.promfg.2017.09.173
- Silva, Francisco. "Validation of advanced numerical techniques for the strength prediction of adhesively-bonded joints". Procedia
Manufacturing (2017): http://dx.doi.org/10.1016/j.promfg.2017.09.007.
10.1016/j.promfg.2017.09.007
- Costa, R. J. S.; Silva, F. J. G.; Campilho, R. D. S. G.; Silva, Francisco. "A novel concept of agile assembly machine for
sets applied in the automotive industry". The International Journal of Advanced Manufacturing Technology (2017): https://publons.com/publon/18129168/.
10.1007/S00170-017-0109-4
- Silva, Francisco. "A Novel Concept of Production and Assembly Processes Integration". Procedia Manufacturing (2017):
http://dx.doi.org/10.1016/j.promfg.2017.07.268.
10.1016/j.promfg.2017.07.268
- Silva, Francisco. "Experimental and numerical analysis of adhesively-bonded T joints under peel loads". Procedia Manufacturing
(2017): http://dx.doi.org/10.1016/j.promfg.2017.09.008.
10.1016/j.promfg.2017.09.008
- Silva, Francisco. "SMED methodology: The reduction of setup times for Steel Wire-Rope assembly lines in the automotive industry".
Procedia Manufacturing (2017): http://dx.doi.org/10.1016/j.promfg.2017.09.110.
10.1016/j.promfg.2017.09.110
- Silva, Francisco. "Reducing the Simulation Cost on Dual-phase Steel Stamping Process". Procedia Manufacturing (2017):
http://dx.doi.org/10.1016/j.promfg.2017.07.138.
10.1016/j.promfg.2017.07.138
- Faneco, T.M.S.; Campilho, R.D.S.G.; Silva, F.J.G.; Lopes, R.M.. "Strength and fracture characterization of a novel polyurethane
adhesive for the automotive industry". Journal of Testing and Evaluation 45 2 (2017): 398-407. http://www.scopus.com/inward/record.url?eid=2-s2.0-85020089504&partnerID=MN8TOARS.
10.1520/JTE20150335
- Silva, Francisco. "Redesigning Barrier Mechanism for Railway Applications". Procedia Manufacturing (2017): http://dx.doi.org/10.1016/j.promfg.2017.07.273.
10.1016/j.promfg.2017.07.273
- Silva, Francisco. "Improve the extrusion process in tire production using Six Sigma methodology". Procedia Manufacturing
(2017): http://dx.doi.org/10.1016/j.promfg.2017.09.171.
10.1016/j.promfg.2017.09.171
- Silva, Francisco. "Machining Duplex Stainless Steel: Comparative Study Regarding End Mill Coated Tools". Coatings (2016):
http://www.mdpi.com/2079-6412/6/4/51.
10.3390/coatings6040051
- Silva, Francisco; Marcelo de Moura; W. F. S. Araújo; F. J. G. Silva; R. D. S. G. Campilho; J. A. Matos. "Manufacturing cushions
and suspension mats for vehicle seats: a novel cell concept". International Journal of Advanced Manufacturing Technology
(2016): https://publons.com/publon/14789655/.
10.1007/s00170-016-9475-6
- Silva, Francisco. "Comparative evaluation of the Double-Cantilever Beam and Tapered Double-Cantilever Beam tests for estimation
of the tensile fracture toughness of adhesive joints". International Journal of Adhesion and Adhesives (2016): http://dx.doi.org/10.1016/j.ijadhadh.2015.12.032.
10.1016/j.ijadhadh.2015.12.032
- Silva, Francisco. "Adhesive selection for hybrid spot-welded/bonded single-lap joints: Experimentation and numerical analysis".
Composites Part B: Engineering (2016): http://dx.doi.org/10.1016/j.compositesb.2015.09.002.
10.1016/j.compositesb.2015.09.002
- Gouveia, R.M.; Silva, F.J.G.; Reis, P.; Baptista, A.P.M.. "Machining duplex stainless steel: Comparative study regarding end
mill coated tools". Coatings 6 4 (2016): http://www.scopus.com/inward/record.url?eid=2-s2.0-85048115067&partnerID=MN8TOARS.
10.3351/coatings6040051
- Nunes, S.L.S.; Campilho, R.D.S.G.; Da Silva, F.J.G.; De Sousa, C.C.R.G.; Fernandes, T.A.B.; Banea, M.D.; Da Silva, L.F.M..
"Comparative failure assessment of single and double lap joints with varying adhesive systems". Journal of Adhesion
92 7-9 (2016): 610-634. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962468952&partnerID=MN8TOARS.
10.1080/00218464.2015.1103227
- J.C.S. Azevedo; R.D.S.G. Campilho; F.J.G. da Silva; T.M.S. Faneco; R.M. Lopes. "Cohesive law estimation of adhesive joints
in mode II condition". Theoretical and Applied Fracture Mechanics 80 (2015): 143-154. https://doi.org/10.1016%2Fj.tafmec.2015.09.007.
10.1016/j.tafmec.2015.09.007
- Cai, W.J.; Chen, D.; Hu, H.; Huang, X.P.; Khotsyanovskii, A.O.; Li, X.S.; Silva, F.J.G.; Yao, S.H.; Zheng, H.N.. "Recent innovations
in material research". Materials Research Innovations 19 (2015): S51-S55. http://www.scopus.com/inward/record.url?eid=2-s2.0-84941350391&partnerID=MN8TOARS.
10.1179/1432891715Z.0000000002027
- Ribeiro, M.C.S.; Meira-Castro, A.C.; Silva, F.G.; Santos, J.; Meixedo, J.P.; Fiúza, A.; Dinis, M.L.; Alvim, M.R.. "Re-use
assessment of thermoset composite wastes as aggregate and filler replacement for concrete-polymer composite materials: A case
study regarding GFRP pultrusion wastes". Resources, Conservation and Recycling 104 (2015): 417-426. http://www.scopus.com/inward/record.url?eid=2-s2.0-84949624603&partnerID=MN8TOARS.
10.1016/j.resconrec.2013.10.001
- Meira Castro, A.C.; Carvalho, J.P.; Ribeiro, M.C.S.; Meixedo, J.P.; Silva, F.J.G.; Fiúza, A.; Dinis, M.L.. "An integrated
recycling approach for GFRP pultrusion wastes: Recycling and reuse assessment into new composite materials using Fuzzy Boolean
Nets". Journal of Cleaner Production 66 (2014): 420-430. http://www.scopus.com/inward/record.url?eid=2-s2.0-84893761592&partnerID=MN8TOARS.
10.1016/j.jclepro.2013.10.030
- Silva, F.J.G.; Martinho, R.P.; Baptista, A.P.M.. "Characterization of laboratory and industrial CrN/CrCN/diamond-like carbon
coatings". Thin Solid Films 550 (2014): 278-284. http://www.scopus.com/inward/record.url?eid=2-s2.0-84890310703&partnerID=MN8TOARS.
10.1016/j.tsf.2013.11.042
- Silva, F.J.G.; Ferreira, F.; Ribeiro, M.C.S.; Castro, A.C.M.; Castro, M.R.A.; Dinis, M.L.; Fiúza, A.. "Optimising the energy
consumption on pultrusion process". Composites Part B: Engineering 57 (2014): 13-20. http://www.scopus.com/inward/record.url?eid=2-s2.0-84885366462&partnerID=MN8TOARS.
10.1016/j.compositesb.2013.09.035
- Meira Castro, A.C.; Ribeiro, M.C.S.; Santos, J.; Meixedo, J.P.; Silva, F.J.G.; Fiúza, A.; Dinis, M.L.; Alvim, M.R.. "Sustainable
waste recycling solution for the glass fibre reinforced polymer composite materials industry". Construction and Building
Materials 45 (2013): 87-94. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876978338&partnerID=MN8TOARS.
10.1016/j.conbuildmat.2013.03.092
- M.C.S. Ribeiro; A. Fiúza; Ribeiro, M. C. S.; A.C.M. Castro; Fiuza, A.; F.G. Silva; Castro, A. C. M.; et al. "Mix design process
of polyester polymer mortars modified with recycled GFRP waste materials". Composite Structures 105 (2013): 300-310.
https://publons.com/publon/6572767/.
10.1016/J.COMPSTRUCT.2013.05.023
- Silva, F.J.G.; Casais, R.C.B.; Martinho, R.P.; Baptista, A.P.M.. "Mechanical and tribological characterization of TiB2
thin films". Journal of Nanoscience and Nanotechnology 12 12 (2012): 9187-9194. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876266995&partnerID=MN8TOARS.
10.1166/jnn.2012.6759
- Silva, F.J.G.; Martinho, R.P.; Alexandre, R.J.D.; Baptista, A.P.M.. "Wear resistance of TiAlSiN thin coatings". Journal
of Nanoscience and Nanotechnology 12 12 (2012): 9094-9101. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876280150&partnerID=MN8TOARS.
10.1166/jnn.2012.6760
- Silva, F.J.G.; Ferreira, F.; Costa, C.; Ribeiro, M.C.S.; Meira Castro, A.C.. "Comparative study about heating systems for
pultrusion process". Composites Part B: Engineering 43 4 (2012): 1823-1829. http://www.scopus.com/inward/record.url?eid=2-s2.0-84859502217&partnerID=MN8TOARS.
10.1016/j.compositesb.2012.01.057
- Martinho, R.P.; Silva, F.J.G.; Alexandre, R.J.D.; Baptista, A.P.M.. "TiB 2 nanostructured coating for GFRP injection
moulds". Journal of Nanoscience and Nanotechnology 11 6 (2011): 5374-5382. http://www.scopus.com/inward/record.url?eid=2-s2.0-84861150133&partnerID=MN8TOARS.
10.1166/jnn.2011.3772
- Silva, F.J.G.; Martinho, R.P.; Alexandre, R.J.D.; Baptista, A.P.M.. "Increasing the wear resistance of molds for injection
of glass fiber reinforced plastics". Wear 271 9-10 (2011): 2494-2499. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960685401&partnerID=MN8TOARS.
10.1016/j.wear.2011.01.074
- Silva, F.J.G.; Casais, R.B.; Martinho, R.P.; Baptista, A.P.M.. "Role of abrasive material on micro-abrasion wear tests". Wear
271 9-10 (2011): 2632-2639. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960675343&partnerID=MN8TOARS.
10.1016/j.wear.2010.11.050
- Silva, F.J.G.; Ferreira, F.; Costa, C.; Castro, A.C.M.; Meixedo, J.P.; Castro, M.R.; Santos, R.P.C.; et al. "Finite element
analysis (FEA) applied to heat transfer optimization process of pultrusion die systems". World Academy of Science, Engineering
and Technology 75 (2011): 270-276. http://www.scopus.com/inward/record.url?eid=2-s2.0-79953670436&partnerID=MN8TOARS.
- Ribeiro, M.C.S.; Meixedo, J.P.; Fiúza, A.; Dinis, M.L.; Meira Castro, A.C.; Silva, F.J.G.; Costa, C.; Ferreira, F.; Alvim,
M.R.. "Mechanical behaviour analysis of polyester polymer mortars modified with recycled GFRP waste materials". World Academy
of Science, Engineering and Technology 75 (2011): 365-371. http://www.scopus.com/inward/record.url?eid=2-s2.0-79953669053&partnerID=MN8TOARS.
- Martinho, R.P.; Andrade, M.F.C.; Silva, F.J.G.; Alexandre, R.J.D.; Baptista, A.P.M.. "Micro-abrasion wear behaviour of TiAlCrSiN
nanostructured coatings". Wear 267 5-8 (2009): 1160-1165. http://www.scopus.com/inward/record.url?eid=2-s2.0-65949105944&partnerID=MN8TOARS.
10.1016/j.wear.2008.12.063
- Andrade, M.F.C.; Martinho, R.P.; Silva, F.J.G.; Alexandre, R.J.D.; Baptista, A.P.M.. "Influence of the abrasive particles
size in the micro-abrasion wear tests of TiAlSiN thin coatings". Wear 267 1-4 (2009): 12-18. http://www.scopus.com/inward/record.url?eid=2-s2.0-65949100399&partnerID=MN8TOARS.
10.1016/j.wear.2008.12.114
- Martinho, R.P.; Silva, F.J.G.; Baptista, A.P.M.. "Cutting forces and wear analysis of Si3N4 diamond
coated tools in high speed machining". Vacuum 82 12 (2008): 1415-1420. http://www.scopus.com/inward/record.url?eid=2-s2.0-49149095576&partnerID=MN8TOARS.
10.1016/j.vacuum.2008.03.065
- Ribeiro, F.; Leite, M.; Silva, F.; Sousa, O.. "Physical exercise in the treatment of Ankylosing Spondylitis: a systematic
review,Exercicio fisico no tratamento da Espondilite Anquilosante: uma revisao sistematica.". Acta reumatológica portuguesa
32 2 (2007): 129-137. http://www.scopus.com/inward/record.url?eid=2-s2.0-34848919536&partnerID=MN8TOARS.
- Martinho, R.P.; Silva, F.J.G.; Baptista, A.P.M.. "Wear behaviour of uncoated and diamond coated Si3N4
tools under severe turning conditions". Wear 263 7-12 SPEC. (2007): 1417-1422. http://www.scopus.com/inward/record.url?eid=2-s2.0-34548091521&partnerID=MN8TOARS.
10.1016/j.wear.2007.01.048
- Silva, F.J.G.; Fernandes, A.J.S.; Costa, F.M.; Baptista, A.P.M.; Pereira, E.. "Unstressed PACVD diamond films on steel pre-coated
with a composite multilayer". Surface and Coatings Technology 191 1 (2005): 102-107. http://www.scopus.com/inward/record.url?eid=2-s2.0-10344260204&partnerID=MN8TOARS.
10.1016/j.surfcoat.2004.02.036
- Silva, F.J.G.; Fernandes, A.J.S.; Costa, F.M.; Baptista, A.P.M.; Pereira, E.. "A new interlayer approach for CVD diamond coating
of steel substrates". Diamond and Related Materials 13 4-8 (2004): 828-833. http://www.scopus.com/inward/record.url?eid=2-s2.0-2442507682&partnerID=MN8TOARS.
10.1016/j.diamond.2003.10.081
- Silva, F.J.G.; Fernandes, A.J.S.; Costa, F.M.; Teixeira, V.; Baptista, A.P.M.; Pereira, E.. "Tribological behaviour of CVD
diamond films on steel substrates". Wear 255 7-12 (2003): 846-853. http://www.scopus.com/inward/record.url?eid=2-s2.0-0042522487&partnerID=MN8TOARS.
10.1016/S0043-1648(03)00145-5
- Silva, F.J.G.; Baptista, A.P.M.; Pereira, E.; Teixeira, V.; Fan, Q.H.; Fernandes, A.J.S.; Costa, F.M.. "Microwave plasma chemical
vapour deposition diamond nucleation on ferrous substrates with Ti and Cr interlayers". Diamond and Related Materials
11 9 (2002): 1617-1622. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036721264&partnerID=MN8TOARS.
10.1016/S0925-9635(02)00029-8
|
| Thesis / Dissertation |
- "Melhoria do processo produtivo de rolhas naturais: aplicação do value stream mapping". Master, 2021.
- "Optimização de equipamento de verificação de componentes para a indústria automóvel". Master, Instituto Politécnico do Porto,
2021.
- "Jig boards through AM". Master, 2021.
- "Os Três Pilares da Sustentabilidade e Gestão Ágil de Projectos: Como é que eles se influenciam". Master, Instituto Politécnico
do Porto, 2021.
- "Fracture Characterisation of bonded joints between cortical bone tissue and bone cement". Master, Instituto Politécnico do
Porto, 2021.
- "Productivity improvement in a company of the industry of bolting systems". Master, Instituto Politécnico do Porto, 2021.
- "Digitalização de KPIs de Controlo Industrial". Master, Instituto Politécnico do Porto, 2021.
- "Criação de aplicação informática para gestão da rede eléctrica de empresa industrial". Master, Instituto Politécnico do Porto,
2021.
- "Design for manufacture using machining features on cnc machining centers". Master, Instituto Politécnico do Porto, 2021.
- "Otimização da utilização de matérias-primas na indústria abrasiva". Master, Instituto Politécnico do Porto, 2021.
- "Reengenharia de uma célula robotizada". Master, Instituto Politécnico do Porto, 2021.
- "Estudo dos mecanismos de desgaste em ferramentas revestidas e não revestidas na fresagem de ampcoloy® 83". Master, Instituto
Politécnico do Porto, 2021.
- "Estimativa de tempos de maquinagem com base em redes neuronais". Master, Instituto Politécnico do Porto, 2021.
- "Otimização do Processo de Moldação de Cortiça por Compressão". Master, Instituto Politécnico do Porto, 2021.
- "Fresagem de uma liga de DSS (LDX2101): Estudo comparativo do desgaste de ferramentas com diferentes geometrias e revestimentos
PVD". Master, Instituto Politécnico do Porto, 2021.
- "Automatização do processo produtivo de cabos de comando para automóveis". Master, Instituto Politécnico do Porto, 2020.
- "Projeto de um sistema de fixação para cadeiras porta-bebés de bicicleta". Master, Instituto Politécnico do Porto, 2020.
- "Análise estratégica para internacionalização de empresas no sector da logística e distribuição". Master, Instituto Politécnico
do Porto, 2020.
- "Desenvolvimento de um módulo veicular capaz de se movimentar a 360° e a 90°". Master, Instituto Politécnico do Porto, 2020.
- "Application of SAFE® to an aircraft maintenance project". Master, Instituto Politécnico do Porto, 2020.
- "Metodologias ágeis no desenvolvimento de novos produtos na indústria da cortiça". Master, Instituto Politécnico do Porto,
2020.
- "Estudo comparativo de maquinagem em duplex 2205". Master, Instituto Politécnico do Porto, 2020.
- "Feasibility study of combining laser cutting with cold forming in a production line". Master, Instituto Politécnico do Porto,
2020.
- "Robust analysis and optimization of a flatten surface technique". Master, Instituto Politécnico do Porto, 2020.
- "Otimização de materiais e processos de fabrico em transportadores de paletes". Master, Instituto Politécnico do Porto, 2020.
- "Melhoria do processo de torneamento na produção de motores elétricos". Master, Instituto Politécnico do Porto, 2020.
- "Análise e melhoria de procedimentos de manutenção numa máquina de construção de pneus". Master, Instituto Politécnico do
Porto, 2020.
- "Lean na gestão de operações de uma empresa de transporte expresso". Master, Instituto Politécnico do Porto, 2020.
- "Otimização dos parâmetros de corte no processo de maquinagem de moldes". Master, Instituto Politécnico do Porto, 2020.
- "Reestruturação da manutenção preventiva e execução de ações de melhorias nas máquinas de injeção de plástico em indústria
de componentes para automóveis". Master, Instituto Politécnico do Porto, 2020.
- "Design of a cellular assembly line for electrical motors". Master, Instituto Politécnico do Porto, 2020.
- "Desenvolvimento de novo conceito de subconjunto de injeção de zamak e melhoria das condições de desgaste para dispositivo
de corte de cabo no setor automóvel". Master, Instituto Politécnico do Porto, 2020.
- "Evaluation of the thermal treatment effect on the entrapment of the powder in internal channels of PBF-LB printed parts".
Master, Instituto Politécnico do Porto, 2020.
- "Indústria 4.0: desenvolvimento de sistemas de informação". Master, Instituto Politécnico do Porto, 2020.
- "Desenvolvimento e caracterização de filmes finos de crómio produzidos por Sputtering em peças poliméricas". Master, Instituto
Politécnico do Porto, 2020.
- "Análise e melhoria do processo de um reparador automóvel". Master, Instituto Politécnico do Porto, 2020.
- "Projeto de recondicionamento de equipamento produtivo para componentes automóveis". Master, Instituto Politécnico do Porto,
2020.
- "Projeto de equipamento flexível para remoção de bobinas de corda de uma bobinadeira". Master, Instituto Politécnico do Porto,
2020.
- "Improving the management of an IT department by using a new developed computer application". Master, Instituto Politécnico
do Porto, 2020.
- "Desenvolvimento de Manutenção Preventiva numa Empresa Industrial". Master, Instituto Politécnico do Porto, 2020.
- "Development of automatic manipulators for plastic injection machines". Master, Instituto Politécnico do Porto, 2020.
- "Definição do fluxo de material de uma nova unidade de produção do setor automóvel". Master, Instituto Politécnico do Porto,
2020.
- "Estruturação do modelo de gestão de uma nova unidade de produção do setor automóvel". Master, Instituto Politécnico do Porto,
2020.
- "Mitigação de problemas na extrusão de componente para pneus: análise numérica e experimental". Master, Instituto Politécnico
do Porto, 2020.
- "Identificação de barreiras na implementação de metodologias ágeis na indústria automóvel". Master, Instituto Politécnico
do Porto, 2020.
- "Alteração do sistema de corte de recuperadora do breaker". Master, Instituto Politécnico do Porto, 2020.
- "Caracterização de revestimentos finos avançados efectuados por PVD". PhD, Universidade do Porto Departamento de Engenharia
Mecânica, 2020.
- "Application and improvement/fine-tuning of a hybrid pm planning method to a real project". Master, Instituto Politécnico
do Porto, 2020.
- Vieira, Ana Margarida da Costa. "Gestão e análise de criticidade do processo de embutição de tubo na indústria automóvel".
Master, 2019. http://hdl.handle.net/10400.22/14558.
- Freitas, Fábio André Veloso. "Analysis of the most suitable project management approach for projects with parallel planning
and execution phases". Master, 2019. http://hdl.handle.net/10400.22/14962.
- Costa, Sandra Catarina da Silva. "Análise e desenvolvimento do processo de sensorização de Tornos CNC para Manutenção Preditiva".
Master, 2019. http://hdl.handle.net/10400.22/15215.
- Rocha, António José Rodrigues da. "Estudo de melhoria de condições de maquinagem em empresa metalomecânica". Master, 2019.
http://hdl.handle.net/10400.22/15460.
- Carvalho, Carlos Jorge Vale. "Plano estratégico de manutenção - implementação da metodologia TPM". Master, 2019. http://hdl.handle.net/10400.22/14865.
- Tadeu, Ângelo Francisco Coutinho. "Processo de industrialização numa empresa do setor automóvel". Master, 2019. http://hdl.handle.net/10400.22/13820.
- Pacheco, Alexandra Manuela Martins. "Acreditação do Laboratório". Master, 2019. http://hdl.handle.net/10400.22/15220.
- Melo, Nuno Vasco da Costa Gama Batista de. "Gestão de um processo de reciclagem de poliuretanos". Master, 2019. http://hdl.handle.net/10400.22/13822.
- Machado, Ana Beatriz Martins. "Estudo de ineficiências na logística externa de empresa produtora de componentes automóveis".
Master, 2019. http://hdl.handle.net/10400.22/15222.
- Barbosa, Teresa Raquel Barros. "Otimização de embalagem metálica para transporte de produtos perigosos". Master, 2019. http://hdl.handle.net/10400.22/15217.
- Rodrigues, Hugo José Machado. "Desenvolvimento e operacionalização de uma aplicação para controlo de produtos não conformes".
Master, 2019. http://hdl.handle.net/10400.22/14633.
- Vieira, Pedro Miguel do Lago. "Organização de serviços de manutenção e testes de “drones” comerciais". Master, 2019. http://hdl.handle.net/10400.22/15195.
- Neto, Francisco António Pires. "Eliminação de manipulações entre operações numa empresa da indústria automóvel". Master, 2019.
http://hdl.handle.net/10400.22/14630.
- Fernandes, João Augusto da Silva. "Desenvolvimento de um veículo inovador para armazéns automáticos". Master, 2018. http://hdl.handle.net/10400.22/14022.
- Monteiro, José Manuel Soares. "Projeto de equipamento de união longitudinal de condutas por soldadura". Master, 2018. http://hdl.handle.net/10400.22/14056.
- Pereira, João Manuel Correia Lopes. "Melhoria contínua e desenvolvimento de kpi's na indústria de cablagens metálicas". Master,
2018. http://hdl.handle.net/10400.22/12630.
- Ribeiro, Ricardo Jorge Costa. "Otimização de Sistemas de Lubrificação de cabos". Master, 2018. http://hdl.handle.net/10400.22/14201.
- Freitas, Andreia Margarida Santos. "Melhoria da Eficiência em Armazém Híbrido". Master, 2018. http://hdl.handle.net/10400.22/13829.
- Camelo, Wesley Fernandes. "Optimization in additive manufacturing". Master, 2018. http://hdl.handle.net/10400.22/11527.
- Selvaraj , Dilipkumar. "Study on feasibility and viability of applying eco-friendly material for the “be”-car bonnet for a
sustainable automotive part". Master, 2018. http://hdl.handle.net/10400.22/13927.
- Madhan, Sasi Kumar. "Identificação de problemas na produção de Pop Cork". Master, 2018. http://hdl.handle.net/10400.22/11524.
- Martins, Luís António Salvador. "Create Cost Effective Post Processing Techniques for Multiple Measured and Simulated Components
of CVT Transmissions". Master, 2018. http://hdl.handle.net/10400.22/12675.
- Marques, Eva Soledade Vaz. "Estudo da Soldabilidade do Ferro Fundido Sibodur 450". Master, 2018. http://hdl.handle.net/10400.22/13981.
- Ferreira, Ana Margarida Dias Torres. "Integração e melhoria de processos na vulcanização de pneus". Master, 2018. http://hdl.handle.net/10400.22/13099.
- Costa, José Miguel Martins dos Reis. "Improvement of functional and management aspects at a wastewater treatment plant of
a brewery company". Master, 2018. http://hdl.handle.net/10400.22/12671.
- Santos, Tiago Luís Branco dos. "Restruturação da função manutenção em empresa do ramo alimentar". Master, 2018. http://hdl.handle.net/10400.22/14234.
- Costa, Cláudio Miguel Gomes da. "Projeto de uma ferramenta de aperto hidráulico para a maquinagem de componentes mecânicos
complexos". Master, 2018. http://hdl.handle.net/10400.22/12263.
- Correia, Vasco José Mota. "Balanceamento e implementação de linha de montagem de equipamento para transporte pré-hospitalar".
Master, 2018. http://hdl.handle.net/10400.22/14245.
- Vilas, José Pedro Maia Junqueiro. "Projeto de melhoria de equipamento para a produção de cabos de comando para veículos".
Master, 2018. http://hdl.handle.net/10400.22/12673.
- Maia, Bruno Miguel Vieira. "Analysis and optimization of the production process". Master, 2018. http://hdl.handle.net/10400.22/13898.
- Sousa, Eduardo Alberto Cunha e. "Aplicação da metodologia SMED na produção de rolhas capsuladas". Master, 2018. http://hdl.handle.net/10400.22/11516.
- Correia, Damásio José Silva. "Lean manufacturing in complex electronic assembly line". Master, 2018. http://hdl.handle.net/10400.22/13922.
- Tellini, Tais. "Melhoria do sistema de fluxo logístico interno - Pull flow: físico e digital". Master, 2018. http://hdl.handle.net/10400.22/14354.
- Deenadayalan, Tholkappiyan. "Optimization of the wing-fuselage interface of the UAS30-P2". Master, 2018. http://hdl.handle.net/10400.22/14228.
- Costa, Carlos Diogo Martins. "Influência da tensão na corda na produção de CAP PLY e otimização do processo de fabrico". Master,
2018. http://hdl.handle.net/10400.22/12401.
- Lopes, Paulo Vinicius Borges. "Contentor Térmico Redondo para Transporte de Asfalto". Master, 2018. http://hdl.handle.net/10400.22/14161.
- Ferreira, Sérgio André Nunes Rodrigues Santos. "Análise e melhoria de processos de manutenção preventiva na indústria de lacticínios".
Master, 2018. http://hdl.handle.net/10400.22/14224.
- Fernandes, António Jorge Queirós. "Melhoria do desempenho da manutenção de uma empresa da indústria automóvel". Master, 2018.
http://hdl.handle.net/10400.22/12389.
- Pavão, Giuliana Karoline Bragança. "Optimização de layout e aplicação de metodologia 5S em empresa metalomecânica". Master,
2018. http://hdl.handle.net/10400.22/14295.
- Thirumal, Saravana Kumar. "Bus manufacturing: line balancing and optimization". Master, 2018. http://hdl.handle.net/10400.22/11422.
- Fernandes, Liliana Patrícia Bastos. "Melhoria do desempenho de ferramentas para estampagem de folha Flandres". Master, 2018.
http://hdl.handle.net/10400.22/14070.
- Santos , João Carlos Castro. "Redesigning of a production line for ergonomic standadrs compliance. Before and after evaluation.".
Master, 2018. http://hdl.handle.net/10400.22/14023.
- Santos, Paulo Ricardo Oliveira dos. "Desenvolvimento do projeto de uma máquina de preparação de tubo espiral". Master, 2018.
http://hdl.handle.net/10400.22/14150.
- Monteiro, João Pedro Campos. "Eco-design in the Portuguese packaging industry". Master, 2018. http://hdl.handle.net/10400.22/14036.
- Carboila, Jorge Manuel Fragoeiro. "Projeto de equipamento para chanfro de geometrias irregulares". Master, 2018. http://hdl.handle.net/10400.22/12266.
- Alves, Carla Alexandra Pereira. "Análise e proposta de otimização de linha de produção de peças em couro para a indústria
automóvel". Master, 2018. http://hdl.handle.net/10400.22/12392.
- Amaral, Ivo Almeida. "Influência dos parâmetros de corte laser na qualidade da superfície cortada". Master, 2018. http://hdl.handle.net/10400.22/11917.
- Dias, Paulo César Machado. "Otimização de uma linha de produção na indústria automóvel". Master, 2018. http://hdl.handle.net/10400.22/14123.
- Lopes, Rúben Miguel Paiva. "Otimização de uma zona de preparação para uma linha de montagem". Master, 2018. http://hdl.handle.net/10400.22/12704.
- Ribeiro, Pedro Gil Sá Lopes Pinto. "Garrafas de gás: um estudo comparativo entre o uso de aço e materiais compósitos com base
nas ferramentas de eco-design". Master, 2018. http://hdl.handle.net/10400.22/12694.
- Cernadas, Filipe Rui da Costa Móia Pereira. "Análise e revisão de planos de manutenção na Cerealis - suporte ao projeto de
gestão de Spare Parts". Master, 2018. http://hdl.handle.net/10400.22/14002.
- Roosens , Jens. "Automação da operação de descarga de uma máquina de fundição injetada". Master, 2017. http://hdl.handle.net/10400.22/9913.
- Tavares, Carla Anita Gomes. "Maximização do rendimento colorístico no processo de branqueio por pad-steam". Master, 2017.
http://hdl.handle.net/10400.22/11505.
- Magalhães, António José Alves de. "Projeto de sistema de manipulação de arames". Master, 2017. http://hdl.handle.net/10400.22/10318.
- Marques, Gonçalo Vaz. "Aplicação da metodologia de análise de valor a mecanismos de barreira para aplicações ferroviárias".
Master, 2017. http://hdl.handle.net/10400.22/10494.
- Sousa, Ricardo Jorge Teixeira de. "Avaliação e melhoria do sistema produtivo de uma empresa metalomecânica". Master, 2017.
http://hdl.handle.net/10400.22/12726.
- Silva, Manuel Luís Soares da. "Análise e melhoria do processo produtivo de reciclagem de tinteiros". Master, 2017. http://hdl.handle.net/10400.22/11878.
- Costa, Tiago Manuel Fernandes da. "Melhoria de processo na indústria de pneus". Master, 2017. http://hdl.handle.net/10400.22/11866.
- Almeida, Pedro Nuno dos Santos. "Contribution to the validation and verification of drive-neutral-reverse subsystem of a CVT
transmission". Master, 2017. http://hdl.handle.net/10400.22/11883.
- Santos, Rui Filipe Lima. "Melhoria do sistema de movimentação do transportador de cunha e posicionamento do tabuleiro de aplicação
Apex". Master, 2017. http://hdl.handle.net/10400.22/10334.
- Gonçalves, Ricardo Esteves. "Análise e otimização de processos numa empresa do sector automóvel". Master, 2017. http://hdl.handle.net/10400.22/12200.
- Moreira, António André da Costa. "Optimização das condições de operação de uma indústria gráfica". Master, 2017. http://hdl.handle.net/10400.22/11392.
- Silva, Gabriel Berton Pereira da. "Desenvolvimento do projeto mecânico de uma máquina alimentadora de barras para centros
de torneamento". Master, 2017. http://hdl.handle.net/10400.22/10495.
- Silva, Ana Patrícia Bravo da. "Analysis of the printing industry concerning the use of ecological products". Master, 2017.
http://hdl.handle.net/10400.22/11350.
- Pinto, Lília Carole Monteiro. "Otimização do processo produtivo no setor automóvel – indústria de pneus". Master, 2017. http://hdl.handle.net/10400.22/10347.
- Guerra, Diogo Rafael Sanches. "Projeto de molde bi-injeção de peças plásticas para a indústria automóvel". Master, 2017. http://hdl.handle.net/10400.22/10523.
- Martins, Carlos Alberto Rodrigues. "Análise comparativa do comportamento de um inserto provido de diferentes revestimentos
na maquinagem de aço inoxidável duplex". Master, 2017. http://hdl.handle.net/10400.22/11511.
- Rosa, Maria da Conceição Marques. "Mapeamento de processos industriais na Ficocables". Master, 2017. http://hdl.handle.net/10400.22/12027.
- Ferreira, Diana Patrícia Ribeiro. "Implementação do Sistema de Gestão Integrada na Capwatt". Master, 2017. http://hdl.handle.net/10400.22/10348.
- Pedrosa, Tiago Manuel Branco. "Projeto-piloto de um gaseificador de pequena escala para resíduos sólidos". Master, 2017. http://hdl.handle.net/10400.22/10317.
- Silva, Carlos Rafael Mota da. "Estudo de fenómenos de rotura na estampagem de aço de fase dual". Master, 2017. http://hdl.handle.net/10400.22/11586.
- Teixeira, Fábio Manuel Gonçalves. "Fivela alarm-free: estudo e projeto de uma fivela indetetável nos equipamentos de deteção
de metais presentes nos aeroportos". Master, 2017. http://hdl.handle.net/10400.22/11680.
- Safraiter, Gabriella Halicki. "Projeto e implementação de um sistema corta gito em uma máquina de injeção de Zamak". Master,
2017. http://hdl.handle.net/10400.22/10496.
- Costa, Manuel Augusto da Rocha Santos Alves da. "Estudo da Satisfação do Cliente em Reparação Automóvel". Master, 2017. http://hdl.handle.net/10400.22/11872.
- Brito, Miguel António Fernandes Pereira Teixeira de. "Paletizador automático para gravação laser de componentes de veículos
automóvel". Master, 2017. http://hdl.handle.net/10400.22/11862.
- Antoniolli, Isadora Carolina. "Análise e otimização de uma linha de produção do setor de automóveis". Master, 2017. http://hdl.handle.net/10400.22/10493.
- Silva, Luís Miguel de Azevedo Ferreira da. "Projeto de molde para peça automóvel injetada com dois materiais poliméricos distintos".
Master, 2017. http://hdl.handle.net/10400.22/10527.
- Radwanski, Jakub. "Kitchen robot prod. line development. Proj. of Bowden cables cutting and thermal forming machine.". Master,
2016. http://hdl.handle.net/10400.22/8256.
- Ludczak, Sandra. "Optimization and improvement of NSCU 1.0. Universal Functional Tester produced by Evoleo Technologi". Master,
2016. http://hdl.handle.net/10400.22/8283.
- Penno, Pawel. "Tire inspection spreading machine". Master, 2016. http://hdl.handle.net/10400.22/8267.
- Grzybowska, Adrianna. "Machine for visual inspection". Master, 2016. http://hdl.handle.net/10400.22/8266.
- Silva, Luiz Gustavo Ricieri. "Estudo da soldabilidade do ferro fundido SiboDur® 450". Master, 2016. http://hdl.handle.net/10400.22/8714.
- Pinto, José Maria Guedes. "Estudo da qualidade de processos na fabricação de semicondutores". Master, 2016. http://hdl.handle.net/10400.22/7955.
- Gomes, Tiago Dias. "Antecipação de problemas e redução de custos na estampagem de aços dual-phase de altíssima resistência".
Master, 2016. http://hdl.handle.net/10400.22/11290.
- Pais, Vítor Abel Marques. "Projeto de molde sandwich para a injeção de duas peças para a indústria automóvel". Master, 2016.
http://hdl.handle.net/10400.22/11303.
- Oliveira, Emanuel Thiago de Sousa. "Eficiência de equipamentos numa área de trituração de cortiça". Master, 2016. http://hdl.handle.net/10400.22/9934.
- Bompastor , Tiago Alexandre Raposo. "Projecto e Implementação de Sistema de Alimentação Automática para Forno de Apoio à Injecção
de Zamak". Master, 2016. http://hdl.handle.net/10400.22/8592.
- Albizu, Urtzi Agirre. "Electronic Redesign of an Industrial Lift". Master, 2016. http://hdl.handle.net/10400.22/8265.
- Castro, Tiago André Moura de. "Projeto de uma ferramenta específica para cravação de terminais elétricos". Master, 2016. http://hdl.handle.net/10400.22/8486.
- Pimenta, Fábio Rúben Carvalho. "Sistema inovador de transferência de paletes". Master, 2016. http://hdl.handle.net/10400.22/10961.
- Quadrado, João Mário Monteiro. "Análise e otimização de máquinas para o fabrico de espiral metálica para cabos". Master, 2016.
http://hdl.handle.net/10400.22/10997.
- Costa, Ricardo Jorge Soares da. "Projeto de Equipamento Flexível para Montagem de Conjuntos para Limpa Para-Brisas de Automóvel".
Master, 2016. http://hdl.handle.net/10400.22/11145.
- Pereira, Lucas Augusto. "Estudo da soldabilidade do ferro fundido dúctil SiboDur® 700". Master, 2016. http://hdl.handle.net/10400.22/9955.
- Viana, Felismino de Brito. "Estudo de problemas de corrosão em cabos de aço zincado". Master, 2015. http://hdl.handle.net/10400.22/8143.
- Nunes, Sara Liliana Silva. "Estudo comparativo da resistência à tração de juntas adesivas de sobreposição simples e dupla".
Master, 2015. http://hdl.handle.net/10400.22/7071.
- Azevedo, Jorge Oliveira. "Estudo de Avarias em Compressores de Ar". Master, 2015. http://hdl.handle.net/10400.22/7830.
- Soares, Mário Jorge Rêgo. "Desenvolvimento de sistemas automáticos de alimentação e descarga de injectora de plásticos". Master,
2015. http://hdl.handle.net/10400.22/8172.
- Braga, Eduardo Miguel Guimarães Ferreira. "Otimização do processo de injeção de ZAMAK". Master, 2015. http://hdl.handle.net/10400.22/7827.
- Santos, Jorge Filipe Moreira dos. "Establishing the main Guidelines for Cast Steel to Produce Truck Parts". Master, 2015.
http://hdl.handle.net/10400.22/7125.
- Almeida, Fernando Jorge Silva. "Estudo e otimização de juntas do tipo Tpeel soldadas, adesivas e híbridas". Master, 2015.
http://hdl.handle.net/10400.22/8050.
- Santos, Pedro Miguel Machado dos. "Projeto mecânico de equipamento para fabrico automatizado de vestuário". Master, 2015.
http://hdl.handle.net/10400.22/8177.
- Ferreira, Bruno Oliveira. "Estudo da corrosão provocada pelo cloro e procura de materiais alternativos". Master, 2015. http://hdl.handle.net/10400.22/8018.
- Nogueira, Pedro Manuel Correia Lopes. "Optimização da orçamentação para operações complexas de maquinagem". Master, 2015.
http://hdl.handle.net/10400.22/8176.
- Pinho, António Pedro Vitória de. "Influência dos Ciclos Térmicos na Soldadura do Aço GRAU 91- SA213 T91 / SA 335 P91". Master,
2015. http://hdl.handle.net/10400.22/8238.
- Moreira, Marco Manuel Miranda. "Projeto de molde para a injeção de peça plástica complexa para a indústria automóvel". Master,
2015. http://hdl.handle.net/10400.22/8171.
- Vieira, Abílio José Araújo. "Pultrusão de perfis para aplicações avançadas a partir de towpregs de elevado desempenho". Master,
2015. http://hdl.handle.net/1822/36653.
- Cruz, Luís Miguel Barbosa da. "Integration of the project team in the classic maintenance cycle". Master, 2015. http://hdl.handle.net/10400.22/8170.
- Soares, António Pedro Oliveira Amorim Leite. "Determinação da tenacidade à fratura de adesivos estruturais em modo misto pelo
ensaio Single-Leg Bending". Master, 2015. http://hdl.handle.net/10400.22/7117.
- Fernandes, Henrique Manuel de Pinho. "Caracterização de perfis pultrudidos Híbridos". Master, 2015. http://hdl.handle.net/10400.22/8161.
- Araújo, Walter Fernando da Silva. "Optimização de Processo Semiautomático de Fabrico de Componentes para Automóveis". Master,
2014. http://hdl.handle.net/10400.22/7103.
- Faneco, Tiago Manuel dos Santos. "Caraterização das propriedades mecânicas de um adesivo estrutural de alta ductilidade".
Master, 2014. http://hdl.handle.net/10400.22/7908.
- Azevedo, João Carlos Silva. "Determinação da tenacidade à fratura em corte (GIIc) de adesivos estruturais pelo ensaio End-Notched
Flexure (ENF)". Master, 2014. http://hdl.handle.net/10400.22/7903.
- Gomes, João Carlos Almeida. "Projecto de equipamento de rotação de moldes de grande porte com recurso ao método de elementos
finitos". Master, 2013. http://hdl.handle.net/10400.22/7684.
- Teixeira, António Ricardo Almeida. "Terminal defect analysis and classification methodology for automotive industry". Master,
2013. http://hdl.handle.net/10400.22/8284.
- Quintas , Filipe Orlando Cardoso Martins. "Desenvolvimento do processo de produção de peça plástica revestida a PVC para a
indústria automóvel". Master, 2012. http://hdl.handle.net/10400.22/7549.
- Martinho, Rui Pedro Cardoso Silva. "Revestimentos PVD mono e multicamada para moldes utilizados na injecção de plásticos reforçados".
PhD, 2009. http://hdl.handle.net/10216/59162.
- Andrade, Maria de Fátima Gonçalves da Costa. "Análise da morfologia e da resistência ao desgaste de revestimentos TiAlSiN
efectuados por PVD". Master, 2008. http://hdl.handle.net/10216/58371.
- Silva, Francisco José Gomes da. "Revestimentos duros ultrafinos executados por P.V.D.". Master, 1997. http://hdl.handle.net/10216/11870.
|
