???global.info.a_carregar???
Mário José Gonçalves Cavaco Mendes is Associate Professor at the Mechanical Engineering Department, Instituto Superior de Engenharia de Lisboa (ISEL), Polytechnic Institute of Lisbon, Portugal. He is a member of CENTEC - Centre for Marine Technology and Ocean Engineering (Group of Marine Dynamics and Hydrodynamics) and a member of CIMOSM - Centro de Investigação em Modelação e Optimização de Sistemas Multifuncionais. He got his PhD (2008) at Instituto Superior Técnico (IST), Technical University of Lisbon, Portugal, with the Thesis: Multi-agent Approach to Fault Tolerant Control Systems, the MSc degree in Mechanical Engineering (2001), on the area of Control Systems and the Engineering degree (5 years course, after BSc) in Mechanical Engineering (1998), the area has been Robotics and Automation, both degrees at the same Institute, IST. He has published work on his research interests: Control Systems for renewable energies and energetic efficiency, Industry 4.0 - Digital factories, multi-agent system approaches in Fault Tolerant Control systems, Safety - Fault Detection and Isolation Systems and Soft Robotics. He won 2nd place in the H-INNOVA Award 2022 (3rd edition) - https://www.hinnovahub.com/, with the project TOUCH REHAB ¿ Soft Robotic Glove for Hand Rehabilitation. This award was the result of teamwork between two ISEL Master's students in Biomedical Engineering and two Professors. He also won, in 2015, the teacher award of the New Generation|15 by Siemens® with a proposal for industry 4.0. The New Generation award was an innovative ideas contest, designed for technical and higher education, to recognize young talents of national engineering.
Read full resume ↓
Identification

Personal identification

Full name
MÁRIO JOSÉ GONÇALVES CAVACO MENDES
Gender
Male

Citation names

  • Mendes, Mário J. G. C.
  • Mendes, M. J. G. C.

Author identifiers

Ciência ID
BD18-DE28-4610
ORCID iD
0000-0002-2448-8667
Google Scholar ID
OmV18CMAAAAJ
Researcher Id
B-5405-2008
Scopus Author Id
24340460600

Email addresses

  • mario.mendes@isel.pt (Professional)
  • mmendes@dem.isel.ipl.pt (Professional)
  • mario.mendes@centec.tecnico.ulisboa.pt (Professional)

Telephones

Telephone
  • (+351) 218317000 Ext.: 1339 (Professional)

Addresses

  • Instituto Politécnico de Lisboa, Instituto Superior de Engenharia de Lisboa. Rua Conselheiro Emídio Navarro, 1, 1959-007, Lisboa, Lisboa, Portugal (Professional)
  • Centro de Engenharia e Tecnologia Naval e Oceânica (CENTEC), Instituto Superior Técnico. Avenida Rovisco Pais, 1049-001, Lisboa, Lisboa, Portugal (Professional)

Websites

Knowledge fields

  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Electrotechnical Engineering, Electronics and Informatics - Automation and Control Systems

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese Proficiency (C2) Proficiency (C2) Advanced (C1) Proficiency (C2) Proficiency (C2)
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
French Upper intermediate (B2) Advanced (C1) Upper intermediate (B2) Upper intermediate (B2) Upper intermediate (B2)
Spanish; Castilian Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Education
Degree Classification
2022/11/14 - 2022/11/15
Attended
 Certificate 1: ISA/IEC 62443 Cybersecurity Fundamentals Specialist (Diploma de especialização)
Major in ISA/IEC 62443 (ISA-99) Cybersecurity Certificate Programs
International Society of Automation (ISA), European Office, Netherlands
2008/12/19
Concluded
 Mechanical Engineering (Doutoramento)
Major in Fault Tolerant Control
Universidade Técnica de Lisboa, Instituto Superior Técnico, Portugal
"Multi-agent Approach to Fault Tolerant Control Systems" (THESIS/DISSERTATION)
 Aprovado por unanimidade
2005 - 2005
Concluded
 The 7th Agent Systems Summer School (EASSS 2005) (Curso médio)
Universiteit Utrecht, Netherlands
2003 - 2003
Concluded
 Curso de Formador em Solar Térmico (Curso médio)
Laboratório de Energia, Portugal
2001/05/14
Concluded
 Mechanical Engineering (Mestrado)
Major in Systems Profile - Fault Diagnosis
Universidade Técnica de Lisboa, Instituto Superior Técnico, Portugal
"Fault Diagnosis based on Fuzzy Hierarchical Techniques" (THESIS/DISSERTATION)
 Aprovado por unanimidade
2000 - 2000
Concluded
 Formação Pedagógica Inicial de Formadores (Curso médio)
Instituto do Emprego e Formação Profissional, Portugal
2000 - 2000
Concluded
 Curso de Autómatos Programáveis STEP7PROG2 (Curso médio)
SIEMENS, Portugal
1999 - 1999
Concluded
 Curso de Computer Integrated Manufacturing (CIM) (Curso médio)
Eshed Robotec, Israel
1998/09
Concluded
 Mechanical Engineering (Licenciatura)
Major in Automation and Robotics
Universidade Técnica de Lisboa, Instituto Superior Técnico, Portugal
"Study and Mechanical Modeling of a Flexible Manipulator Robot" (THESIS/DISSERTATION)
 13/20
Affiliation

Science

Category
Host institution 		Employer
2015/12 - Current Researcher (Research) Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
2004 - 2017/12/31 Researcher (Research) Instituto de Engenharia Mecânica, Portugal

Teaching in Higher Education

Category
Host institution 		Employer
2020/06/01 - Current Teacher Coordinator (Polytechnic Teacher) Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2002/11/26 - 2020/05/31 Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2001/10/01 - 2002/11/25 Assistant (Polytechnic Teacher) Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
1998/10/01 - 2001/09/30 Invited Assistant (Polytechnic Teacher) Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal

Others

Category
Host institution 		Employer
2023/01/09 - Current Coordinator of the Master's Course in Mechanical Engineering Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2023/01/09 - Current Member of ISEL's Pedagogical Council as Coordinator of the Master's Course in Mechanical Engineering Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2021/11 - Current Member of the Coordinating Council of the Department of Mechanical Engineering Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2009/09/01 - Current Tutor Teacher of the 1st year students of the Master in Mechanical Engineering Instituto Politécnico de Lisboa Área Departamental de Engenharia Mecânica, Portugal
2021/11 - 2023/01/09 Elected Representative of the Department of Mechanical Engineering for the Technical-Scientific Council (CTC) of ISEL. Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2014/10/01 - 2021/05/31 Member of the Coordinating Council of the Department of Mechanical Engineering Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2019/03 - 2019/07/30 President of the Jury for the exams of students who enter ISEL through special access modalities: M23, DETs and DTSPs Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2009/03/01 - 2009/07/31 President of the Jury for the exams of students who enter ISEL through special access modalities: M23 Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2003/11/01 - 2006/10/31 PhD researcher (Scholarship from PRODEP III/Medida 5/Acção 5.3: Formação Avançada de Docentes do Ensino Superior) Universidade de Lisboa Instituto Superior Técnico, Portugal
Projects

Grant

Designation Funders
2017/11 - 2018/05 Generic Hydraulic Power Take-Off System for Wave Energy Converters
H2020-EU.1.4.1.2
Researcher
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal

Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal

Fundación Tecnalia Research and Innovation, Spain
European Commission Seventh Framework Programme for Research and Technological Development
Concluded

Contract

Designation Funders
2023/01/01 - 2025/06/30 PTQCI - Portuguese Quantum Communications Infrastructure
PTQCI-DIGITAL-2021-QCI-01
Researcher
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
 European Commission
Ongoing
2023/09/04 - 2024/09/03 Atuadores suaves multifuncionais para aplicações de Soft Robótica (Multifunctional soft actuators for Soft Robotics applications)
IPL/IDI&CA2023/ACTSOFTLY_ISEL
Principal investigator
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
 Instituto Politécnico de Lisboa
Ongoing
2023/09/04 - 2024/09/03 Fabricação Aditiva de Elétrodos de Alto Desempenho para Supercondensadores: Uma nova abordagem em dispositivos para Armazenamento de Energia (Additive Manufacturing of High-Performance Electrodes for Supercapacitors: A New Approach to Energy Storage Devices)
IPL/IDI&CA2023/DIW-Cap_ISEL
Researcher
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
 Instituto Politécnico de Lisboa
Ongoing
2021/01/01 - 2024/03/28 WEC4MUP - Variable Geometry Wave Energy Conversion System for Floating Platforms
PTDC/EME-REN/0242/2020
Researcher
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2020/01/01 - 2023/12/31 Strategic Project - UIDP/00134/2020
UIDP/00134/2020
Researcher
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2020/01/01 - 2023/12/31 Strategic Project - UIDB/00134/2020
UIDB/00134/2020
Researcher
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2020/02 - 2023/01 CISROBCLE - Desenvolvimento de um sistema robótico inteligente para a lavagem de cisternas (Development of an intelligent robotic system for cistern washing)
LISBOA-01-0247-FEDER-039764
Researcher
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
 P2020 - FEDER
Ongoing
2018/10 - 2022/09 HIL4PTO - Experimental simulation of oil-hydraulic Power Take-Off systems for Wave Energy Converters
PTDC/EME-REN/29044/2017
Researcher
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2021/01/01 - 2022/02/28 MySafeWater - make the difference! drink and save tap water
N. 1025 - ISEL - MySafeWater
Researcher
Instituto Superior de Engenharia de Lisboa, Portugal
 Estratégia Nacional de Educação Ambiental (ENEA 2020)
Ongoing
2020/06 - 2020/10 Hands4lives - Safe Hands Save Lives
COVID-19/ISEL/2020 – Hands4lives
Researcher
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
 Instituto Superior de Engenharia de Lisboa
Ongoing
2019/01/01 - 2019/12/31 Centro de Engenharia e Tecnologia Naval e Oceânica
UID/Multi/00134/2019
Researcher
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal

Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2017/06 - 2018/05 Industry 4.0 applied to the robotic washing of tank trucks to transport toxic products
IPL/2017/ROBOTCLEAN/ISEL
Principal investigator
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
 Instituto Politécnico de Lisboa
Concluded
2017/02 - 2018/01 Static and Dynamic Analysis of a Robotic Arm
sem referência
Researcher
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
 Carmona - Sociedade de Limpeza e Tratamento de Combustíveis, SA
Concluded
2015/01 - 2017/12 Unidades de I&D - UID/EMS/50022/2013
UID/EMS/50022/2013
Researcher
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2015/01 - 2017/12 Unidades de I&D - UID/Multi/00134/2013
UID/Multi/00134/2013
Researcher
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
 Fundação para a Ciência e a Tecnologia
2013/05/01 - 2014/12/31 Extensor de autonomia acoplável para Veículos Elétricos (Attachable range extender for Electric Vehicles)
VEEX nº 30392
Principal investigator
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
 Agência Nacional de Inovação SA
Concluded
2011 - 2014 SurgRob: Physical Human-Robot Interaction for Fault-Tolerant Surgical Applications
PTDC/EME-CRO/114571/2009
Researcher
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2011/01/01 - 2012/12/31 Projecto Estratégico - LA 22 - 2011-2012
PEst-OE/EME/LA0022/2011
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2010 - 2012 AQUANET: Decentralised and Reconfigurable Control for Water delivery Multipurpose Canal Systems
PTDC/EEA-CRO/102102/2008
Researcher
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2005/06 - 2008/05 FTCMAS - Fault-Tolerant Control based on Multi-agent Systems
POCI/EME/59522/2004
PhD Student Fellow
Instituto de Engenharia Mecânica, Portugal
 Fundação para a Ciência e a Tecnologia
2000/06 - 2004/05 DAMADICS: Development and Application of Methods for Actuator Diagnosis in Industrial Control Systems
HPRN-CT-2000-00110
Research Fellow
Instituto de Engenharia Mecânica, Portugal

Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
European Union
Concluded
Outputs

Publications

Book
  1. Mário J. G. C. Mendes. Multi-Agent Approach To Fault Tolerant Control Systems. Germany: Novas Edições Acadêmicas - OmniScriptum Publishing Group. 2017.
    Published
Book chapter
  1. Gaspar, J.F.; Santos, F.P.; Soares, C. Guedes; Mendes, M.J.G.C.; Gonçalves, J.P.; Agostinho, D.V.. "Calibration of floating offshore wind turbine experimental models using a novel workbench apparatus". In Innovations in Renewable Energies Offshore, 667-677. United Kingdom: CRC Press, 2024.
    Published • 10.1201/9781003558859-73
  2. Gaspar, J.F.; Zeng, C.; Xu, H.T.; Hallak, T.S.; Soares, C. Guedes; Mendes, M.J.G.C.. "Wave energy converter power take-off with active oil-hydraulic accumulator". In Advances in Maritime Technology and Engineering, 427-433. United Kingdom: CRC Press, 2024.
    Published • 10.1201/9781003508779-46
  3. Gaspar, J.F.; Pinheiro, R.F.; Kamarlouei, M.; Soares, C. Guedes; Mendes, M.J.G.C.. "Review on hardware-in-the-loop simulation of wave energy converters". In Trends in Maritime Technology and Engineering Volume 2, 391-399. CRC Press, 2022.
    Published • 10.1201/9781003320289-41
  4. Vicente, Luís; Lomelino, Pedro; Carreira, Fernando; Campos, Francisco M.; Mendes, Mário J. G. C.; Calado, J. M. F.. "A Photorealistic Digital Twin for a Tank Truck Washing Robotic System". In IFIP Advances in Information and Communication Technology, 57-66. Portugal: Springer International Publishing, 2022.
    Published • 10.1007/978-3-031-14844-6_5
  5. Vicente, Luís; Lomelino, Pedro; Carreira, Fernando; Campos, Francisco M.; Mendes, Mário J. G. C.; Osório, A. Luís; Calado, J. M. F.. "Industrial Collaborative Robotics Platform". In IFIP Advances in Information and Communication Technology, 567-576. Springer International Publishing, 2021.
    Published • 10.1007/978-3-030-85969-5_53
  6. Kamarlouei, M.; Gaspar, J. F.; Calvário, M.; Hallak, T. S.; Guedes Soares, C.; Mendes, M. J. G. C.. "Prototyping and wave tank testing of a floating platform with point absorbers". In Advances in Renewable Energies Offshore, 421-428. London, United Kingdom: CRC Press, 2019.
    Published
  7. Kamarlouei, M.; Gaspar, J. F.; Guedes Soares, C.; Cruz, B. F.; Mendes, M. J. G. C.. "A review of fault tolerant design in wave energy converters". In Advances in Renewable Energies Offshore, edited by Guedes Soares, C., 369-378. London, United Kingdom: CRC Press, 2019.
    Published
  8. Mendes, M.J.G.C.; Calado, J.M.F.; Sá da Costa, J.M.G.. "Fault Diagnosis System Based in Agents". In Fault Detection, Supervision and Safety of Technical Processes 2006, 396-401. China: Elsevier, 2007.
    10.1016/b978-008044485-7/50067-1
Conference abstract
  1. Matos, Manuel; Monge, Nuno; Mendes, Mário J. G. C.; Ana Catarina Cardoso de Sousa; Hugo Filipe Félix Antunes da Silva; Maria Alexandra Cardoso da Costa; Ana Maria Garcia Henriques Barreiros Joanaz de Melo. "Medidas para poupança de água - abordagens concretas implementadas no ISEL através do Projeto de Sustentabilidade MySafeWater". Paper presented in 12ª Conferência FORGES (Fórum da Gestão do Ensino Superior nos Países e Regiões de Língua Portuguesa), Praia, 2022.
    Published
  2. Ana Maria Garcia Henriques Barreiros Joanaz de Melo; Hugo Filipe Félix Antunes da Silva; Matos, Manuel; Mendes, Mário J. G. C.; Monge, Nuno; Ana Catarina Cardoso de Sousa; Maria Alexandra Cardoso da Costa. "O Projeto MYSAFEWATER no ISEL". Paper presented in Conferência Campus Sustentável 2022 (CCS2022), Leiria, 2022.
    Published
  3. Monge, Nuno; Matos, Manuel; Sousa, A. C.; Mendes, Mário J. G. C.; Costa, A.; Silva, H.F.; Barreiros, A.M.. "MySafeFiller - Adaptador para o enchimento de garrafas de água impresso em 3D". Paper presented in 11.º Seminário de Matemática e Ciências Experimentais, Lisboa, 2022.
    Published
Conference paper
  1. Niehus, Manfred; Da Silva, João Castanheira; Carvalho, João M.; Simão, José; Serrador, António; Mendes, Mário J.G.C.. "Towards a hardware-in-the-loop quantum optical ground station simulator and testbed". Paper presented in IEEE ICSOS International Conference on Space Optical Systems and Applications, Vancouver, 2023.
    Published • 10.1109/icsos59710.2023.10491227
  2. Vicente, Luís; Mendes, Mário J. G. C.. "Projeto de sistema SCADA para o novo paradigma da indústria 4.0". Paper presented in 12.º Congresso Nacional de Mecânica Experimental (CNME 2020), Monte Real - Leiria, 2021.
    Published
  3. Kamarlouei, M.; Gaspar, J. F.; Calvário, M.; Hallak, T. S.; Mendes, Mário J. G. C.; Thiebaut, F.; Guedes Soares, C.. "On the experimental study of a concentric wave energy array adapted to an offshore floating platform". Paper presented in 13th European Wave and Tidal Energy Conference (EWTEC2019), Napoli, 2019.
    Published
  4. Francisco, Miguel B. R. M.; Mendes, Mario J. G. C.; Calado, J. M. F.. "An Electro-pneumatic Prototype to Support the Teaching of Industry 4.0 Concepts". Paper presented in 5th Experiment International Conference (exp.at'19), Funchal, 2019.
    Published • 10.1109/expat.2019.8876524
  5. Hugo D’Almeida; Paulo Almeida; Tiago Charters; Mendes, Mário J. G. C.. "Electro-pneumatic Control of Soft Robotic Hand Prosthesis Actuators". Paper presented in 6th IEEE Portuguese Meeting on BioEngineering (ENBENG 2019), Lisbon, 2019.
    Published • 10.1109/enbeng.2019.8692563
  6. Beites, N.; Dias, M.; Mendes, Mário J. G. C.; Carreira, F.; Campos, F.; Calado, J. M. F.. "A Gantry Robot Automatic Positioning System using Computational Vision". Paper presented in 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials/11th National Congress on Experimental Mechanics, Porto, 2018.
    Published
  7. D'Almeida, H.; Charters, T.; Almeida, P.; Mendes, Mário J. G. C.. "Soft Robotic Hand Prosthesis using Reverse Engineering and Fast Prototyping". Paper presented in 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials/11th National Congress on Experimental Mechanics, Porto, 2018.
    Published
  8. Hallak, Thiago S.; Gaspar, José F.; Kamarlouei, Mojtaba; Calvário, Miguel; Mendes, Mário J. G. C.; Thiebaut, Florent; Guedes Soares, C.. "Numerical and Experimental Analysis of a Hybrid Wind-Wave Offshore Floating Platform’s Hull". Paper presented in 37th International Conference on Ocean, Offshore and Artic Engineering (OMAE2018), Madrid, 2018.
    Published • 10.1115/omae2018-78744
  9. Mendes, Mario J. G. C.; Neto, Iris M. M. S.; Calado, Joao M. F.. "Fault diagnosis system via internet applied to a gantry robot — A proposal for industry 4.0". Paper presented in IEEE International Conference on Autonomous Robot Systems and Competitions (ICARSC 2018), Torres Vedras, 2018.
    Published • 10.1109/icarsc.2018.8374177
  10. Mendes, Mario J. G. C.; Martins, Luis. "An internet remote laboratory to teach Industrial Automation". Paper presented in 7th International Conference on Human System Interactions (HSI2014), Caparica, 2014.
    Published • 10.1109/hsi.2014.6860464
  11. Tavares, I.; Borges, J.; Mendes, M. J. G. C.; Botto, M. A.. "Assessment of Data-driven Modeling Strategies for Water Delivery Canals". Paper presented in 10th Portuguese Conference on Automatic Control (CONTROLO’2012), Funchal, 2012.
    Published
  12. Mendes, Mario J. G. C.; Sá da Costa, J.. "A multi-agent approach to a networked fault detection system". Paper presented in Conference on Control and Fault-Tolerant Systems (SysTol’10), 2010.
    Published • 10.1109/systol.2010.5675986
  13. Mendes, Mário J. G. C.; Sá da Costa, J.. "Fault Detection Agents based on Wavelet Adaptive Thresholds". Paper presented in 9th Portuguese Conference on Automatic Control (CONTROLO’2010), Coimbra, 2010.
    Published
  14. Valerio, D.; Beirao, P.; Mendes, M.J.G.C.; Sá da Costa, J.. "Robustness assessment of model-based control for the Archimedes Wave Swing". Paper presented in European Control Conference (ECC'2009), Budapest, Hungary, 2009.
    Published • 10.23919/ecc.2009.7074983
  15. Valério, D; Sá da Costa, J; Mendes, MJGC; Beirão, P. "Switching Control of the Archimedes Wave Swing". Paper presented in 8th Portuguese Conference on Automatic Control (CONTROLO’08), 2008.
    Published
  16. Valério, D.; Beirão, P.; Mendes, M.J.G.C.; Sá Da Costa, J.. "Comparison of control strategies performance for a Wave Energy Converter". Paper presented in 16th Mediterranean Conference on Control and Automation (MED'2008), Ajaccio, 2008.
    Published • 10.1109/med.2008.4602139
  17. Mendes, Mário J. G. C.; Santos, B.M.S.; Sá da Costa, J.. "Multi-agent platform for fault tolerant control systems". Paper presented in IEEE International Conference on Systems, Man and Cybernetics (SMC’2007), Montreal, 2007.
    Published • 10.1109/icsmc.2007.4413986
  18. Mendes, MJGC; Santos, BMS; Sá da Costa, JMG. "Multi-agent architectures for fault tolerant networked control systems". Paper presented in International Conference Intelligent Systems and Agents (IADIS’2007), Lisboa, 2007.
    Published
  19. Sá da Costa, J.; Santos, B. M. S.; Mendes, Mário J. G. C.. "A Design Approach to FDI/FTC of Complex Networked Control Systems". Paper presented in 16th International Conference on Control Systems and Computer Science (CSCS16), Bucharest, 2007.
    Published
  20. Beirao, P; Mendes, MJGC; Valério, D; Sá da Costa, J. "Control of the Archimedes Wave Swing using Neural Networks". Paper presented in 7th European Wave and Tidal Energy Conference (EWTEC 2007), Porto, 2007.
    Published
  21. Sá da Costa, J; Santos, BMS; Mendes, MJGC. "Multi-agent toolbox for fault tolerant networked control systems design". Paper presented in NeCST'07 – 3rd International Workshop on Networked Control Systems: Tolerant to Faults, Nancy, 2007.
    Published
  22. Sá da Costa, J.; Mendes, M. J. G. C.. "FDI/FTC for complex networked control systems based on multi-agents". Paper presented in NeCST'06 - 2nd International Workshop on Networked Control Systems: Tolerant to Faults, Rende, 2006.
    Published
  23. Mendes, MJGC; Calado, JMF; Sá da Costa, JMG. "Fault Detection Scheme using the Agents Paradigm". Paper presented in 7th Portuguese Conference on Automatic Control (CONTROLO’2006), Lisboa, 2006.
    Published
  24. Mendes, Mário J. G. C.; Kowal, M.; Calado, J.M.F.; Sá da Costa, J.. "Fault Isolation Approach using a Profibus Network: a case study". Paper presented in 5th Portuguese Conference on Automatic Control (CONTROLO’2002), Aveiro, 2002.
    Published
  25. Mendes, Mário J. G. C.; João M. F. calado; José Sá da Costa. "Pruning Algorithm applied to a Hierarchical Structure of Fuzzy Neural Networks: case study". Paper presented in 8th IEEE International Conference on Methods and Models in Automation and Robotics (MMAR’2002), Szczecin, 2002.
    Published
  26. Calado, JMF; Kowal, M; Mendes, MJGC; Korbicz, J; Sá da Costa, JMG. "Neuro-Fuzzy Fault Detection Approach using a Profibus Network". Paper presented in 10th IEEE Mediterranean Conference on Control and Automation (MED’2002), Lisboa, 2002.
    Published
  27. Calado, JMF; Carreira, F; Mendes, MJGC; Sá da Costa, JMG. "A Fault Detection Approach Based on Fuzzy Qualitative Reasoning". Paper presented in 4ª DAMADICS Workshop – Qualitative Approach for Fault Diagnosis, 2002.
    Published
  28. Mendes, MJGC. "“State-of-Art” da Detecção e Diagnóstico de Avarias em Processos Industriais". Paper presented in Conferência Científica e Tecnológica em Engenharia no ISEL (CCTE’2002), 2002.
    Published
  29. Mendes, M. J. G. C.; Calado, J. M. F.; Sousa, J. M.; Sa da Costa, J. M. G.. "Industrial actuator diagnosis using hierarchical fuzzy neural networks". Paper presented in European Control Conference (ECC'2001), Porto, 2001.
    Published • 10.23919/ecc.2001.7076342
  30. Mendes, Mário J. G. C.; Marek Kowal; Josez korbicz; José Sá da Costa. "Neuro-Fuzzy techniques in FDI system for sugar factory actuators". Paper presented in 2ª DAMADICS Vacation School – Neuro-Fuzzy Methods for Modelling and Fault Diagnosis, Lisboa, 2001.
    Published
  31. Martins, J; Mendes, MJGC; Verdelho, L; Sá da Costa, J. "Static and Dynamic Analysis of a Flexible Manipulator with the aid of Finite Element Method". Paper presented in 3rd Portuguese Conference on Automatic Control (CONTROLO’98), Coimbra, 1998.
    Published
Conference poster
  1. Agostinho, D.V.; Hallak, T. S.; Gaspar, J. F.; Mendes, Mário J. G. C.; Guedes Soares, C.. "Experimental Wind Turbine Simulator (WTS)". Paper presented in NInTec Science Days 24, 2024.
  2. A. Correia; Charters, T.; A. Leite; F. Campos; N. Monge; A. Rocha; Mendes, Mário J. G. C.. "Multifunctional soft actuators for Soft Robotics applications: Soft Robotic Gripper". Paper presented in Project IPL/IDI&CA2023/ACTSOFTLY_ISEL Workshop of 8th IDI&CA Edition - Concurso de Investigação, Desenvolvimento, Inovação e Criação Artística do Instituto Politécnico de Lisboa, 2024.
  3. J. M. Carvalho; J. C. da Silva; A. Serrador; Mendes, Mário J. G. C.; M. Niehus. "Study of pointing and communication between low Earth orbit satellite and optical ground station". Paper presented in Quantum Communication Networks Workshop, 2024.
Journal article
  1. Correia, A.; Charters, T.; Leite, A.; Campos, F.; Monge, N.; Rocha, A.; Mendes, M. J. G. C.. "Design, Control, and Testing of a Multifunctional Soft Robotic Gripper". Actuators 13 12 (2024): 476-497. http://dx.doi.org/10.3390/act13120476.
    Open access • Published • 10.3390/act13120476
  2. Gaspar, José F.; Pinheiro, Rafael F.; Mendes, Mário J.G. C.; Kamarlouei, Mojtaba; Guedes Soares, C.. "Review on hardware-in-the-loop simulation of wave energy converters and power take-offs". Renewable and Sustainable Energy Reviews 191 (2024): 114144. http://dx.doi.org/10.1016/j.rser.2023.114144.
    Published • 10.1016/j.rser.2023.114144
  3. Zeng, Chen; Gaspar, José; Mendes, Mário J. G. C.; Guedes Soares, Carlos. "Hardware-in-the-loop testing framework for active accumulator wave energy converters". Proceedings of 15th European Wave and Tidal Energy Conference 15 (2023): http://dx.doi.org/10.36688/ewtec-2023-430.
    Published • 10.36688/ewtec-2023-430
  4. Vicente, Luís; Carreira, Fernando; Campos, Francisco M.; Mendes, Mário J. G. C.; Calado, João M. F.; Carvalho, Gamboa. "Supervision System 4.0 for a Road Tanker Washing Robot Manipulator". Applied Sciences 13 14 (2023): 8500. http://dx.doi.org/10.3390/app13148500.
    Published • 10.3390/app13148500
  5. Lino MF Costa; Fernando Carreira; Mendes, Mário J. G. C.. "Automatic Control System for an Oil-Hydraulic Actuator of a Scissor Lift". Global Journal of Engineering Sciences 10 3 (2022): 1-26. https://irispublishers.com/gjes/pdf/GJES.MS.ID.000736.pdf.
    Open access • Published
  6. Loução, Ricardo; Duarte, Gonçalo O.; Mendes, Mário J. G. C.. "Aerodynamic Study of a Drag Reduction System and Its Actuation System for a Formula Student Competition Car". Fluids 7 9 (2022): 309. http://dx.doi.org/10.3390/fluids7090309.
    Published • 10.3390/fluids7090309
  7. Kamarlouei, M.; Gaspar, J.F.; Calvario, M.; Hallak, T.S.; Mendes, M.J.G.C.; Thiebaut, F.; Soares, C. Guedes. "Experimental study of wave energy converter arrays adapted to a semi-submersible wind platform". Renewable Energy (2022): http://dx.doi.org/10.1016/j.renene.2022.02.014.
    Published • 10.1016/j.renene.2022.02.014
  8. Vicente, Luís; Mendes, Mário J. G. C.. "SCADA System Design for the New Industry 4.0 Paradigm". Revista Mecânica Experimental 35 (2022): 1-12. http://www-ext.lnec.pt/APAET/paginas/Revista/publicacao.html#n_35.
    Open access • Published
  9. Kamarlouei, M.; Gaspar, J.F.; Calvario, M.; Hallak, T.S.; Mendes, M.J.G.C.; Thiebaut, F.; Guedes Soares, C.. "Experimental analysis of wave energy converters concentrically attached on a floating offshore platform". Renewable Energy 152 (2020): 1171-1185. http://dx.doi.org/10.1016/j.renene.2020.01.078.
    Published • 10.1016/j.renene.2020.01.078
  10. Miranda, J.; Borges, J.; Valério, D.; Mendes, M.J.G.C.. "Multi-agent management system for electric vehicle charging". International Transactions on Electrical Energy Systems 25 5 (2015): 770-788. http://www.scopus.com/inward/record.url?eid=2-s2.0-84929320245&partnerID=MN8TOARS.
    Published • 10.1002/etep.1840
  11. Tavares, I.; Borges, J.; Mendes, M.J.G.C.; Botto, M.A.. "Assessment of data-driven modeling strategies for water delivery canals". Neural Computing and Applications 23 3-4 (2013): 625-633. http://www.scopus.com/inward/record.url?eid=2-s2.0-84884586619&partnerID=MN8TOARS.
    Published • 10.1007/s00521-013-1417-8
  12. Louro, Diogo; Mendes, Mário J.G.C.; Valério, Duarte; Costa, José Sá da. "Fault Detection System for the Évora Irrigation Canal". IFAC Proceedings Volumes 45 20 (2012): 750-755. http://dx.doi.org/10.3182/20120829-3-mx-2028.00284.
    Published • 10.3182/20120829-3-mx-2028.00284
  13. Miranda, J.; Borges, J.; Mendes, M.J.G.C.; Valério, D.. "Development of a multi-agent management system for an intelligent charging network of electric vehicles". IFAC Proceedings Volumes 18 1 (2011): 12267-12272. http://dx.doi.org/10.3182/20110828-6-it-1002.03492.
    Published • 10.3182/20110828-6-IT-1002.03492
  14. Mendes, Mário J.G.C.; Santos, Bruno M.S.; da Costa, José Sá. "A Matlab/Simulink Multi-agent Toolkit for Distributed Networked Fault Tolerant Control System". IFAC Proceedings Volumes 42 8 (2009): 1073-1078. http://dx.doi.org/10.3182/20090630-4-es-2003.00177.
    Published • 10.3182/20090630-4-es-2003.00177
  15. Mário J. G. C. Mendes; Bruno M. S. Santos; José Sá da Costa. "Multi-agent Platform and Toolbox for Fault Tolerant Networked Control Systems". Journal of Computers 4 4 (2009): 303-310. http://www.academypublisher.com/ojs/index.php/jcp/article/view/0404303310.
    Published • 10.4304/jcp.4.4.303-310
  16. José Sá da Costa; Mário J. G. C. Mendes. "Design of Distributed Fault Tolerant Control Systems". IFAC Proceedings Volumes 41 2 (2008): 13575-13580. https://doi.org/10.3182/20080706-5-KR-1001.02299.
    Published • https://doi.org/10.3182/20080706-5-KR-1001.02299
  17. Valério, Duarte; Mendes, Mário J.G.C.; Beirão, Pedro; Sá da Costa, José. "Identification and control of the AWS using neural network models". Applied Ocean Research 30 3 (2008): 178-188. http://dx.doi.org/10.1016/j.apor.2008.11.002.
    Published • 10.1016/j.apor.2008.11.002
  18. Sá da Costa, J; Santos, BMS; Mendes, MJGC. "A Design Approach to FDI/FTC of Complex Networked Control Systems". Journal of Control Engineering and Applied Informatics 9 3, 4 (2007): 3-11. http://ceai.srait.ro/index.php/ceai/issue/view/8.
    Published
  19. Calado, J.M.F.; Carreira, F.P.N.F.; Mendes, M.J.G.C.; Sá da Costa, J.M.G.; Bartys, M.. "Fault Detection Approach Based on Fuzzy Qualitative Reasoning Applied to the DAMADICS Benchmark Problem". IFAC Proceedings Volumes 36 5 (2003): 1077-1082. http://dx.doi.org/10.1016/s1474-6670(17)36636-3.
    Published • 10.1016/s1474-6670(17)36636-3
  20. Calado, J.M.F.; Louro, R.; Mendes, M.J.G.C.; Sá da Costa, J.M.G.; Kowal, M.. "Fault Isolation Based on HSFNN Applied to DAMADICS Benchmark Problem". IFAC Proceedings Volumes 36 5 (2003): 951-956. http://dx.doi.org/10.1016/s1474-6670(17)36615-6.
    Published • 10.1016/s1474-6670(17)36615-6
  21. Kowal, M.; Korbicz, J.; Mendes, M.J.G.C.; Calado, J.M.F.. "Fault detection using neuro-fuzzy networks". Systems Science 28 1 (2002): 45-57. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036989077&partnerID=MN8TOARS.
    Published
  22. Calado, J.M.F.; Mendes, M.J.G.C.; Costa, J. M. G. Sá da; Korbicz, J.. "NEURO AND NEURO-FUZZY HIERARCHICAL STRUCTURES COMPARISON IN FDI: CASE STUDY". IFAC Proceedings Volumes 35 1 (2002): 453-458. http://dx.doi.org/10.3182/20020721-6-es-1901.01629.
    Published • 10.3182/20020721-6-es-1901.01629
  23. Mendes, M.J.G.C.; Kowal, M.; Korbicz, J.; Costa, J. M. G. Sá da. "NEURO-FUZZY STRUCTURES IN FDI SYSTEM". IFAC Proceedings Volumes 35 1 (2002): 465-470. http://dx.doi.org/10.3182/20020721-6-es-1901.01631.
    Published • 10.3182/20020721-6-es-1901.01631
Magazine article
  1. Sobral, J.; Mendes, Mário J. G. C.. "A Internet das Coisas e a Engenharia Mecânica – Desafios e Tendências para a Profissão", Revista Ingenium – “A Internet das Coisas”, 2016
Manual
  1. Mendes, Mário J. G. C.; Bruno M. S. Santos; José Sá da Costa. FTNCS-MAS Designer Toolbox – For Matlab R2007b (and Above) - User's Manual. Portugal. 2008.
    Published
Online resource
  1. Mendes, Mário J. G. C.; José Sá da Costa; Bruno M. S. Santos. Fault Tolerant Networked Control Systems based in Multi-agent Systems (FTNCS-MAS) Designer Toolbox – For Matlab R2007b (and Above). 2007. https://www.mathworks.com/matlabcentral/fileexchange/62668-ftncs-mas-designer-toolbox.
Report
  1. Mendes, Mário; Luis Verdelho. 1998. Estudo e Modelação Mecânica de um Robô Manipulador Flexível.
Thesis / Dissertation
  1. Mendes, Mário. "Multi-agent Approach to Fault Tolerant Control Systems". PhD, Universidade de Lisboa Instituto Superior Técnico, 2008.
  2. Mendes, Mário. "Diagnóstico de Avarias baseado em Técnicas Hierárquicas Fuzzy". Master, Universidade de Lisboa Instituto Superior Técnico, 2001.

Other

Physical object
  1. Mendes, Mário J. G. C.; Ana Maria Garcia Henriques Barreiros Joanaz de Melo; Matos, Manuel; Hugo Filipe Félix Antunes da Silva; Ana Catarina Cardoso de Sousa; Maria Alexandra Cardoso da Costa; Monge, Nuno. "MySafeFiller - um dispositivo de interface entre o bocal de uma garrafa de água reutilizável e a torneira (an interface device between the mouth of a reusable water bottle and the faucet)". 2022. Instituto Nacional da Propriedade Industrial IP, Desenho/Modelo Nacional n. 6704-Publicado pelo Instituto Nacional da Propriedade Industrial (INPI).
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2022/01/24 Fault Tolerance in a Digital, Intelligent and Connected Industry (A tolerância a falhas numa indústria digital, inteligente e interligada) Seminários de Física
Instituto Superior de Engenharia de Lisboa/Departamento de Física (Lisboa, Portugal)
2019/06 An Electro-pneumatic Prototype to Support the Teaching of Industry 4.0 Concepts 5th Experiment@ International Conference (exp.at'19)
Universidade da Madeira (Funchal, Portugal)
2019/05/23 Controlo eletro-pneumático de atuadores de prótese de mão usando técnicas de softrobotics Higher Education 4.0 Meeting: In the 500th anniversary of Leonardo's death
MNAC - National Museum of Contemporary Art (Lisboa, Portugal)
2019/02 Electro-pneumatic Control of Soft Robotic Hand Prosthesis Actuators 6th IEEE Portuguese Meeting on BioEngineering (ENBENG 2019)
Instituto Superior de Engenharia de Lisboa (Lisboa, Portugal)
2018/11 Soft Robotic Hand Prosthesis using Reverse Engineering and Fast Prototyping 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials (TEMM 2018)/11th National Congress on Experimental Mechanics
(Porto, Portugal)
2018/11 A Gantry Robot Automatic Positioning System using Computational Vision 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials (TEMM 2018)/11th National Congress on Experimental Mechanics
(Porto, Portugal)
2018/10 A review of fault tolerant design in wave energy converters 3rd International Conference on Renewable Energies Offshore (RENEW2018)
Centre for Marine Technology and Ocean Engineering - IST (Lisboa, Portugal)
2018/04/27 Fault Diagnosis System Via Internet Applied to a Gantry Robot - A Proposal for Industry 4.0 IEEE International Conference on Autonomous Robot Systems and Competitions (ICARSC2018)
ISEL – Instituto Superior de Engenharia de Lisboa (Polytechnic Institute of Lisbon), ESTG – Escola Superior de Tecnologia e Gestão (Polytechnic Institute of Leiria) and Portuguese Robotics Society. (Torres Vedras, Portugal)
2017/05/06 SoftRobotics and its applicability in Orthoprosthesis III Jornadas de Ortoprotesia
Escola Superior de Tecnologia da Saúde de Lisboa, Instituto Politécnico de Lisboa (Lisboa, Portugal)
2014/06/18 An Internet Remote Laboratory to Teach Industrial Automation 7th International Conference on Human System Interaction (HSI 2014)
Universidade Nova de Lisboa (Costa da Caparica, Lisboa, Portugal)
2012/08/30 Fault Detection System for the Évora Irrigation Canal 8th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes (SAFEPROCESS’2012)
National University of Mexico (Cidade do México, Mexico)
2011/05/25 Task 5: Fault detection and Isolation Seminar for international consultants of the AQUANET project
Instituto Superior Técnico, Universidade Técnica de Lisboa (Lisboa, Portugal)
2011/02/04 Fault Tolerant Control Systems Seminar in the AQUANET project
Instituto Superior Técnico, Universidade Técnica de Lisboa (Lisboa, Portugal)
2010/10/08 A Multi-agent Approach to a Networked Fault Detection System Conference on Control and Fault-Tolerant Systems (SysTol’10)
Nancy University (Nice, France)
2010/09/08 Fault Detection Agents based on Wavelet Adaptive Thresholds 9th Portuguese Conference on Automatic Control (CONTROLO’2010)
Universidade de Coimbra (Coimbra, Portugal)
2007/10/08 Multi-agent Platform for Fault Tolerant Control Systems SMC’2007 - IEEE International Conference on Systems, Man and Cybernetics
IEEE Systems, Man, and Cybernetics Society (Montreal - The Delta Centre-Ville, Canada)
2007/07/04 Multi-agent Architectures for Fault Tolerant Networked Control Systems IADIS’2007 - International Conference Intelligent Systems and Agents
IADIS - International Association for Development of the Information Society (Lisboa - Sana Hotel, Portugal)
2006/09/11 Fault Detection Scheme using the Agents Paradigm 7th Portuguese Conference on Automatic Control - CONTROLO’2006
Instituto Superior Técnico (Lisboa - IST, Portugal)
2006/08/30 Fault Diagnosis System based in Agents 6th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes (SAFEPROCESS’2006)
Tsinghua University (Pequim, China)
2003/06/09 Fault Isolation based on HSFNN Applied to DAMADICS Benchmark Problem 5th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes (SAFEPROCESS’2003)
(Washington D.C., United States)
2002/09/06 Fault Isolation Approach using a PROFIBUS Network: a Case Study 5th Portuguese Conference on Automatic Control (CONTROLO’2002)
Universidade de Aveiro (Aveiro, Portugal)
2002/09/05 Pruning Algorithm Applied to a Hierarchical Structure of Fuzzy Neural Networks: Case Study 8th IEEE International Conference on Methods and Models in Automation and Robotics (MMAR ’2002)
(Szczecin (Hotel Radisson), Poland)
2002/07/24 Neuro-Fuzzy Structures in FDI System 15th IFAC World Congress on Automatic Control (b’02)
Universidade Politécnica da Catalunha (Barcelona, Spain)
2002/07/09 Neuro-Fuzzy Fault Detection Approach using a PROFIBUS Network 10th IEEE Mediterranean Conference on Control and Automation (MED’2002)
Instituto Superior Técnico (Lisbon, Portugal)
2002/05/07 State-of-Art da Deteção e Diagnóstico de Avarias em Processos Industriais Conferência Científica e Tecnológica em Engenharia - CCTE’2002
Instituto Superior de Engenharia de Lisboa (Lisbon, Portugal)
2001/09/06 Industrial Actuator Diagnosis using Hierarchical Fuzzy Neural Networks European Control Conference - ECC’2001
(Porto (Seminário de Vilar), Portugal)
2001/09/01 Neuro-Fuzzy Techniques in FDI System for Sugar Factory Actuators 2ª DAMADICS Vacation School – Neuro-Fuzzy Methods for Modelling and Fault Diagnosis
Instituto Superior de Engenharia de Lisboa (Lisbon (ISEL), Portugal)
2001/06/21 Industrial actuator diagnosis using hierarchical fuzzy neural networks DAMADICS young researcher activity
Institute of Control & Computation Engineering, Faculty of Electrical Engineering, University of Zielona Góra (Zielona Góra, Poland)
2000/10/19 Industrial actuator diagnosis using hierarchical fuzzy neural networks 1ª DAMADICS Workshop - Start Up and Benchmark Definition
Institute of Automatic Control and Robotics, Warsaw University of Technology (Warsaw, Poland)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2023/09/30 - 2024/11/22 Design of a simulator for a wind turbine installed on a floating offshore platform (Projeto de simulador de uma turbina eólica instalada numa plataforma flutuante offshore)
Co-supervisor of Daniel Vicente Lopes Agostinho
 Mestrado em Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2022/09 - 2023/12/13 Study of a photovoltaic system integrated into a motorhome (Estudo de um sistema fotovoltaico integrado numa autocaravana)
Co-supervisor of Rodrigo Manuel Farinha Vasconcelos
 Mestrado em Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2022/09 - 2023/12/05 Design of a mobile robot for harvest support tasks (Projeto de um robô móvel para tarefas de apoio à vindima)
Co-supervisor of Filipa Gomes Leite Sempiterno Aires
 Mestrado em Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2022/09 - 2023/12/04 3D printing of medical instruments: modelling, design and feasibility (Impressão 3D de instrumentos médicos: modelação, design e viabilidade)
Co-supervisor of Maria Leonor Trigueiros Calhau
 Mestrado em Engenharia Biomédica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2022/09 - 2023/12/04 Development of a prototype autonomous vehicle from a remote-controlled car (Desenvolvimento de um protótipo de veículo autónomo a partir de um carro telecomandado)
Co-supervisor of Ricardo Miguel Nunes Marçal
 Mestrado em Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2021/09 - 2022/12/15 Study of the Function of Programmable Logic Controllers in Management 4.0 (Estudo da Função dos Controladores Lógicos Programáveis numa Gestão 4.0)
Co-supervisor of Diogo Miguel Tavares Ribeiro
 Mestrado em Engenharia e Gestão Industrial (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2021/09 - 2022/12/14 Automatic command system for oil-hydraulic actuators of a freight stacker crane (Sistema de comando automático para atuadores óleo-hidráulicos de um transelevador de carga)
Co-supervisor of Lino Miguel Ferreira e Costa
 Mestrado em Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2021/09 - 2022/12/13 Study of the effect of 3D printing parameters on the mechanical strength of printed parts (Estudo do efeito dos parâmetros de impressão 3D na resistência mecânica das peças impressas)
Co-supervisor of André Laranjeira Pereira
 Mestrado em Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2021/10 - 2022/12/02 Pneumatic glove design to aid hand rehabilitation (Projeto de luva pneumática para ajuda na reabilitação da mão)
Co-supervisor of Mafalda Marto Mendes
 Mestrado em Engenharia Biomédica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal

Instituto Politécnico de Lisboa Escola Superior de Tecnologia da Saúde de Lisboa, Portugal
2022/06/27 - 2022/07/30 Design of a filament extruder for 3D printing
Co-supervisor of Michele Santacatterina
 DIPLOMA di istruzione Tecnica (Specialization course)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2022/06/27 - 2022/07/29 Design of a filament extruder for 3D printing
Co-supervisor of Letizia Cervo
 DIPLOMA di istruzione Tecnica (Specialization course)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2021/07/10 - 2021/08/10 Design of a Soft Gripper for a Robot Manipulator
Supervisor of Michele Fantelli
 Automation and Mechatronics Technician (Specialization course)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2021 - 2021/07/23 GEN3SEES: Talas 3D
Supervisor of Ana Sofia Lourenço Bernardino, Carolina Flores Bugalho e Marta Carvalhão Jacques
 Engenharia Biomédica (Degree)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2020 - 2021/07/23 DRS system for a Formula Student racing car
Co-supervisor of Ricardo Alexandre Martins Loução
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2020 - 2021/07/12 Supervision System Project for the New Industry 4.0 Paradigm
Supervisor of Luís Filipe Catarino Vicente
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2018 - 2020/05/18 Project of a Supervision System to Houses
Co-supervisor of João Pedro Valadas Machado
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2018 - 2019/12/18 Virtual Reality Project of a Process Controlled by Logic Controllers
Co-supervisor of Ana Catarina Duarte da Silva
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2017 - 2018/12/17 Fault Diagnosis in a Wave Energy Converter
Supervisor of Bernardo Freire da Cruz
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2017 - 2018/12/17 Electro-pneumatic System Design for Teaching Industry 4.0 Concepts
Supervisor of Miguel Brito Ribeiro Martins Francisco
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2017 - 2018/12/03 Robotic Positioning System according to Industry 4.0 Concept
Co-supervisor of Nuno Miguel Leitão Beites
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2016 - 2018/11/22 Study and development of a hand prosthesis using Soft Robotics techniques
Co-supervisor of Hugo Gonçalo Lopes De Almeida
 Engenharia Biomédica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal

Instituto Politécnico de Lisboa Escola Superior de Tecnologia da Saúde de Lisboa, Portugal
2016 - 2018/06/29 Challenges for Maintenance from the perspective of Industry 4.0
Co-supervisor of João Veríssimo Sobreira
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2015 - 2017/12/15 Monitoring and study of injection, extrusion and blowing processes at Logoplaste
Co-supervisor of João David Rosa Duarte
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2014 - 2016/11/30 Fault diagnosis via internet of industrial processes controlled with programmable logic controllers
Supervisor of Íris Margarida Moreira Santos Neto
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2014 - 2015/12/09 Low-Cost Vibration Sensors: Tendencies and Applications in Condition Monitoring of Machines and Structures
Co-supervisor of Fábio Roberto de Carvalho Alves
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2013 - 2015/03/11 Control and Optimization of HVAC Systems Using Artificial Intelligence Techniques
Co-supervisor of João Duarte Barqueiro Pereira Marques
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2013 - 2014/11/28 Internet Monitoring of Controlled Industrial Processes with Programmable Logic Controllers
Supervisor of Rui Miguel Ferreira Matias
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2011 - 2013/12/20 Rail Transport Solutions - Simulation of Diesel and Electric Traction Vehicles' Driving and Traffic
Co-supervisor of Luís Filipe Aleixo Marques
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2011 - 2013/12/09 Study and optimization of a low power (10W) fuel cell and its integration in portable equipment
Co-supervisor of Ana Sofia da Costa Ramalho
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2012 - 2013/12/06 Project of a Remote Laboratory for Automation of Industrial Processes
Supervisor of Luis Miguel Silva Martins
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2011 - 2013/03/14 Study and development of a piezo-electric rain sensor for cars
Co-supervisor of André Sobral Gomes Partes Alexandre
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2010 - 2012/12/18 Performance analysis of a hybrid car compared to the internal combustion
Co-supervisor of João Filipe Gonçalves Apolinário
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2011 - 2012/11/05 Study and Development of the Adaptation of a Light Vehicle for the Transport of Disabled People
Co-supervisor of Vítor Miguel Cunha Antunes
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2010 - 2011/12/12 Proactive maintenance of HVAC systems using intelligent multi-agent systems
Co-supervisor of Pedro Luís Gonçalves da Silva
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2010 - 2011/12/05 Fault-tolerant control of an irrigation canal
Co-supervisor of Diogo André Amâncio Louro
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2010 - 2011/12/05 Automation and control of a bicycle storage system
Co-supervisor of Paulo André Guia Silva Gonçalves
 Engenharia Mecânica (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
1999/04/06 - 1999/06/21 Planning of Robot Manipulator Trajectories using the Robot Scorbot ER-IX
Co-supervisor of Julien Vanhersecke
 Engenharia Mecânica (Other)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
1999/04/06 - 1999/06/21 Heat Exchanges simulation using Matlab / Simulink software
Co-supervisor of Virginie Derisbourg
 Engenharia Mecânica (Other)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2022/07/06 - 2022/07/08 Member of the International Technical Program Committee of 15th International Conference on Automatic Control and Soft Computing (CONTROLO 2022) , Caparica, Lisbon, Portugal. 6 to 8 July 2022. (2022/07/06 - 2022/07/08)
Conference (Member of the Scientific Committee)
 Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2022/05/17 - 2022/05/20 Member of the International Scientific Program Committee of 8th International Conference on Control, Decision and Information Technologies (CoDIT 2022), 17 to 20 may 2022, at Istanbul, Turkey. (2022/05/17 - 2022/05/20)
Conference (Member of the Scientific Committee)
 IEEE, United States
2022/04/29 - 2022/04/30 Member of the International Scientific and Program Committee of 22th IEEE International Conference on Autonomous Robot Systems and Competitions (ICARSC 2022), 29 to 30 April 2022, Europarque, Santa Maria da Feira, Portugal. (2022/04/29 - 2022/04/30)
Conference (Member of the Scientific Committee)
 Sociedade Portuguesa de Robótica, Portugal
2019 - 2020/04/17 Member of the International Scientific Committee of 20th IEEE International Conference on Autonomous Robot Systems and Competitions (ICARSC 2020), Ponta Delgada - Açores, Portugal, 15 to 17 April 2020. (2020/04/15 - 2020/04/17)
Conference (Member of the Scientific Committee)
 Universidade dos Açores, Portugal
2018 - 2019/04/26 Member of the International Scientific Committee of 19th IEEE International Conference on Autonomous Robot Systems and Competitions (ICARSC 2019), Porto - Gondomar, Portugal, 24 to 26 April 2019 (2019/04/24 - 2019/04/26)
Conference (Member of the Scientific Committee)
 Universidade do Porto, Portugal
2017 - 2018/04/27 Program chairman and member of the International Scientific Committee of 18th IEEE International Conference on Autonomous Robot Systems and Competitions (ICARSC 2018), Torres Vedras, Portugal, 25 to 27 April 2018 (2018/04/25 - 2018/04/27)
Conference (Member of the Organising Committee)
 IEEE Robotics and Automation Society, United States

Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal

Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2016/04/16 - 2016/04/16 Seminar of the company PLEXUS with the title: "Control and Supervision Systems" (2016/04/16 - 2016/04/16)
Seminar (Co-organisor)
 Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2014 - 2014/05/15 Member of the International Scientific Committee of IEEE 14th International Conference on Autonomous Robot Systems and Competitions (Robótica'14), Espinho, Portugal, 14 to 15 May 2014 (2014/05/14 - 2014/05/15)
Conference (Member of the Scientific Committee)
 IEEE Robotics and Automation Society, United States
2013 - 2013/04/25 Member of the International Program Committee of 13th International Conference on Autonomous Robot Systems and Competitions (Robótica'13), Lisboa, Portugal, 24 to 25 April 2013 (2013/04/24 - 2013/04/25)
Conference (Member of the Scientific Committee)
 IEEE Robotics and Automation Society, United States
2011 - 2011/11/18 Workshop about: "Fault Tolerant Networked Control Systems Applications", at International Symposium on Computational Intelligence for Engineering Systems (ISCIES 2011), 16 to 18 November 2011, Coimbra, Portugal. (2011/11/16 - 2011/11/18)
Conference (Member of the Organising Committee)
 Universidade de Coimbra, Portugal

Instituto Politécnico de Coimbra, Portugal

Event participation

Activity description
Type of event 		Event name
Institution / Organization
2022/11/08 - 2022/11/10 Participation and Co-chairman of a session 1.6: Wave Energy - Control
Conference
 5th International Conference on Renewable Energies Offshore (RENEW 2022)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
2020/11/16 - 2020/11/19 Participation and Co-chairman of a session: Safety 4
Conference
 5th International Conference on Maritime Technology and Engineering (MARTECH 2020)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
2020/10/12 - 2020/10/15 Participation and Co-chairman of a session: Control of Wave Energy Devices
Conference
 4th International Conference on Renewable Energies Offshore (RENEW 2020)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
2018/10/10 - 2018/10/10 Participation in the workshop. Project of European Regional Development Fund (ERDF) - INTERREG Atlantic Area Programme (EAPA_344/2016) - www.arcwind.eu
Workshop
 ARCWIND - Adaptation and implementation of floating wind energy conversion technology for the Atlantic region?
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
2018/05/07 - 2018/05/09 Participation in 4th International Conference on Maritime Technology and Engineering (MARTECH2018)
Conference
 4th International Conference on Maritime Technology and Engineering (MARTECH2018)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
2016/11/17 - 2016/11/17 Participation in the Seminary: Indústria 4.0 - Oportunidades e Desafios para a Engenharia, organized by the Southern Regional Council of the College of Mechanical Engineering of the Order of Engineers, in the Auditorium of the Regional Headquarters in Lisbon, Portugal.
Seminar
 Indústria 4.0 – Oportunidades e Desafios para a Engenharia
Ordem dos Engenheiros, Portugal
2016/10/27 - 2016/10/27 Participation in the 1st PROFORUM Conference - Inovação na Engenharia para a Competitividade na Economia (IECE 2016).
Conference
 1ª Conferência PROFORUM – Inovação na Engenharia para a Competitividade na Economia (IECE 2016)
2016/10/24 - 2016/10/26 Participation in 2nd International Conference on Renewable Energies Offshore (RENEW2016).
Conference
 2nd International Conference on Renewable Energies Offshore (RENEW2016)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
2016/07/04 - 2016/07/06 Participation in 3th International Conference on Maritime Technology and Engineering (MARTECH2016).
Conference
 3th International Conference on Maritime Technology and Engineering (MARTECH2016)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
2016/04/23 - 2016/04/26 Visit to the Hannover Messe 2016 (the main world fair in industrial technology) within the scope of the New Generation|15 Award, integrated in a delegation of the company SIEMENS Portugal.
Exhibition
 Hannover Messe 2016
Siemens AG, Germany
2009/10/30 - 2009/10/30 Participation in the 1st Technical Conference on Instrumentation and Control, organized by the ISA Portugal association, at the Hotel Olissippo Oriente, Lisbon, Portugal.
Conference
 1ª Conferência Técnica de Instrumentação e Controlo
ISA Portugal, Portugal
2008/11/25 - 2008/11/25 Participation in the seminar "Wireless, Wi-Fi, USB Data Acquisition" by National Instruments, at Taguspark, Núcleo Central - Edifício Expansão (Sala 484).
Seminar
 Wireless, Wi-Fi, USB Data Aquisition seminary
National Instruments Corp, United States
2008/06/26 - 2008/06/27 Participation in the Workshop "The Contribution of Distributed Monitoring and Control towards Improving Energy Efficiency", jointly sponsored by HYCON and the MIT-Portugal Program, Instituto Superior Técnico, Lisbon, Portugal.
Workshop
 Workshop “The Contribution of Distributed Monitoring and Control towards Improving Energy Efficiency”
HYCON and the MIT-Portugal Program, Portugal
2008/06/02 - 2008/06/02 Participation in the ISEL Entrepreneurship Workshop, "Creation of Scientific and Technologically Based Companies", Congress Centre, Main Auditorium - ISEL, Lisbon, Portugal.
Workshop
 Workshop ISEL Empreendedorismo, "Criação de Empresas de Base Científica e Tecnológica"
Instituto Superior de Engenharia de Lisboa, Portugal
2008/03/14 - 2008/03/16 Participation and training at RoboParty® 2008, in Guimarães, Portugal. RoboParty® consists of a scientific/pedagogical event that brings together teams of 4 people, for 3 days and 2 nights, to teach how to build autonomous mobile robots, in a simple, fun way and accompanied by qualified people.
Festival
 RoboParty® 2008
Universidade do Minho, Portugal
2003/10/28 - 2003/10/28 Participation in the International Forum on Applied Artificial Intelligence, Lisboa, Portugal.
Meeting
 International Forum on Applied Artificial Intelligence
Fundação Luso-Americana para o Desenvolvimento, Portugal
2000/07/10 - 2000/07/12 Participation in the 1st DAMADICS Vacation School - Qualitative Methods for Fault Diagnosis, at Universidade Politécnica da Catalunha, 10 to 12 July 2000, Terrassa, Spain.
Meeting
 1ª DAMADICS Vacation School – Qualitative Methods for Fault Diagnosis

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2024/11/18 Automated Charriots Return System Retrofit (Atualização de Sistema Automatizado de Retorno de Charriots)
(Thesis) Main arguer
 André Filipe Gomes Monteiro (Master)
Instituto Politécnico de Coimbra Instituto Superior de Engenharia de Coimbra, Portugal
2024/02/27 Industrialization of an automated guided vehicle (Industrialização de um veículo guiado automaticamente)
(Thesis) Main arguer
 Joaquim António Mendes Gaspar (Master)
Instituto Politécnico de Coimbra Instituto Superior de Engenharia de Coimbra, Portugal
2023/07/10 Instrumentation of an inflatable robotic link for deformation estimation and contact detection (Instrumentação de um elo robótico insuflável para estimação de deformação e deteção de contacto)
(Thesis) Main arguer
 Manuel Almeida de Sá (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/12/12 Use of Augmented Reality to optimize Maintenance processes (Utilização da Realidade Aumentada na optimização de processos de Manutenção)
(Thesis) Arguer
 Tobias Alves Oliveira (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2020/12/17 Additive Manufacturing of a Vehicle Brake System Component
(Thesis) Main arguer
 José Diogo Sena Luz da Cruz Marques (Master)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2020/11/24 Model Predictive Control with a Neural Network Model of a Formula Student Prototype
(Thesis) Main arguer
 Henrique Manuel Caldeira Pimentel Furtado (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/11/04 Estudo de materiais avançados de micélio para utilização na indústria automóvel
(Thesis) Main arguer
 Rafael Maria Escaleira Alves (Master)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2019/06/24 Development of a small-scale educational workbench for industry 4.0
(Thesis) Arguer
 André Pedro Ramalho Martins Pacheco (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019/06/06 A utilização do fabrico aditivo no desenvolvimento de componente para a indústria automóvel
(Thesis) Main arguer
 Pedro Jorge Pinto Claro Maldonado (Master)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2017/12/12 Development, programming and start-up of an interchangeable 3D-printing module
(Thesis) Main arguer
 Hugo Miguel Lopes Oliveira (Master)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2017/05/24 Desenvolvimento de Controlo Eletrónico para Sistema de Recuperação de Energia Térmica de Veículos Automóveis
(Thesis) Main arguer
 Eliseu Salvador Aires Ribeiro (Master)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2016/06/23 Resilience on Supervision Systems over Heterogeneous Communication Networks (Apresentação à CAT)
(Thesis) Main arguer
 Fábio Emanuel Pais Januário (PhD)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2013/12/17 Conversão de Veículos Diesel para Tração Elétrica
(Thesis) Main arguer
 Filipe Alexandre Simões de Araújo (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2012/06/22 Detecção de falhas baseada em modelos identificados com recurso a técnicas de subespaços
(Thesis) Main arguer
 Fábio Miguel Veloso dos Santos (Master)
Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
2011/11/22 Decentralized and Reconfigurable Control for water delivery Multipurpose Canal Systems
(Thesis) Main arguer
 Isaías da Veiga Tavares (Master)
Universidade Técnica de Lisboa, Instituto Superior Técnico, Portugal
2011/11/15 Identificação e controlo de um conversor de energia das ondas usando modelos Fuzzy e Redes Neuronais
(Thesis) Main arguer
 João José Alves Casanova Fernandes (Master)
Universidade Técnica de Lisboa, Instituto Superior Técnico, Portugal
2010/11/08 Development of a Multi-agent Management System for an Intelligent Charging Network of Electric Vehicles
(Thesis) Main arguer
 João Pedro Bailão Miranda (Master)
Universidade Técnica de Lisboa, Instituto Superior Técnico, Portugal
2010/07/27 Simulação de Veículos Híbridos Hidráulicos
(Thesis) Arguer
 Carlos Alberto Gonçalves Trancredo (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2010/05/31 Multi-agent Control of the Three-Tank Benchmark System
(Thesis) Main arguer
 Gonçalo Nuno Rodrigues Nunes Vinagre (Master)
Universidade Técnica de Lisboa, Instituto Superior Técnico, Portugal
2009/11/02 Simulação de Veículos Híbridos Hidráulicos
(Thesis) Main arguer
 Carlos Alberto Gonçalves Trancredo (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2009/11/02 Simulação de Veículos Híbridos Pneumáticos
(Thesis) Main arguer
 Gonçalo Ricardo Costa Patrício (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2001 Laboratório de controlo virtual
(Thesis) Arguer
 Fernando Paulo Neves Fonseca Carreira (Other)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal

Association member

Society Organization name Role
2006/11 - Current The International Society of Automation (ISA)
2005/01 - Current Associação Portuguesa de Controlo Automático (APCA)
1999/01 - Current Centro de Estudos de Engenharia Mecânica (CEEM)
1998/10 - Current Ordem dos Engenheiros (OE)
2007/01 - 2013 Institute of Electrical and Electronics Engineers, Inc. (IEEE)

Committee member

Activity description
Role 		Institution / Organization
2023/01/09 - Current Coordinator of the Coordinating Committee of the Master's Course in Mechanical Engineering: Mário J.G.C. Mendes (Coordinator), Vowels: Maria Amélia Loja, Gonçalo Duarte, Pedro Silva, André Carvalho, a Student Delegate for the Course: Bruno Almeida and a student: Margarida Fernandes as a representative of the 2nd year students Master's year.
Coordinator
 Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2018 - Current Member of the founding commission of ODI - Oficina Digital do ISEL. ODI is an ISEL structure dedicated to the practice, dissemination, promotion, development and research in technology and science.
Member
 Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2021/06 - 2023/01/09 Member of the Coordinating Committee of the Mechanical Engineering Degree Course (Vogal da Comissão Coordenadora do Curso de Licenciatura em Engenharia Mecânica). Coordinating Committee: Nuno Henriques (Coordinator), Vowels: Mário J.G.C. Mendes, José Sobral, Nuno Serra, Alda Carvalho and one student elected.
Member
 Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2019 - 2023/01/09 ECTS Coordinator of the ISEL/IPL ERASMUS + program for the Degree in Mechanical Engineering.
Coordinator
 Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2019 - 2023/01/09 Member of the Competency Accreditation Committee for the Degree in Mechanical Engineering at DEM/ISEL. Accreditation Committee: Nuno Henriques (Coordinator), vowels: Mário J.G.C. Mendes and Nuno Serra.
Member
 Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2021/03/22 - 2022/02/24 President
President / Vice-president
 The International Society of Automation - Portugal Section, Portugal
2019/09/27 - 2021/03/21 President of the General Assembly
President / Vice-president
 The International Society of Automation - Portugal Section, Portugal
2019/09/27 - 2021/03/21 Member of the Fiscal Council
Member
 The International Society of Automation - Portugal Section, Portugal
2018 - 2021 Member of the Coordinating Committee of the Mechanical Engineering Degree Course (Vogal da Comissão Coordenadora do Curso de Licenciatura em Engenharia Mecânica). Coordinating Committee: Luís Vicente Ferreira (Coordinator), Vowels: Nuno Henriques, Mário J.G.C. Mendes, Nuno Serra, Alda Carvalho and one student elected for each year of the Degree.
Member
 Instituto Superior de Engenharia de Lisboa, Área Departamental de Engenharia Mecânica, Portugal
2018 - 2021 Member of the Coordinating Committee of the Master in Maintenance Engineering (Vogal da Comissão Coordenadora do Mestrado em Engenharia de Manutenção). Coordinating Committee: João Manuel Ferreira Calado (Coordinator), Vowels: José Sobral, Mário J.G.C. Mendes, António Roque, Filipe Rodrigues and one student elected for each year of this Master.
Member
 Instituto Superior de Engenharia de Lisboa, Área Departamental de Engenharia Mecânica, Portugal
2015/10 - 2018 Member of the Coordinating Committee of the Mechanical Engineering Degree Course (Vogal da Comissão Coordenadora do Curso de Licenciatura em Engenharia Mecânica). Coordinating Committee: Joaquim Infante Barbosa (Coordinator), Vowels: João Milho, Mário J.G.C. Mendes, Alexandra Rodrigues, Pedro Patrício and one student elected for each year of the Degree.
Member
 Instituto Superior de Engenharia de Lisboa, Área Departamental de Engenharia Mecânica, Portugal
2016/12 - 2017/12 Member of the Coordinating Committee of the Postgraduate Course in Advanced Manufacturing Processes. Coordinating Committee: Armando Inverno (Coordinator), Members: José Manuel Simões and Mário J.G.C. Mendes
Member
 Instituto Superior de Engenharia de Lisboa, Área Departamental de Engenharia Mecânica, Portugal
2012 - 2014/10 Member of the Coordinating Committee of the Master in Maintenance Engineering (Vogal da Comissão Coordenadora do Mestrado em Engenharia de Manutenção). Coordinating Committee: João Manuel Ferreira Calado (Coordinator), Vowels: Chedas Sampaio, Mário J.G.C. Mendes, Inês Barbosa, José Sobral and one student elected for each year of this Master.
Member
 Instituto Superior de Engenharia de Lisboa, Área Departamental de Engenharia Mecânica, Portugal
2011/09/30 - 2012/12/31 Chair of the Education Commission
Coordinator
 The International Society of Automation - Portugal Section, Portugal
2012 - 2012 Member of the Commission for the conduction of the ISEL Strategic Plan for the 2012/2015 triennium (Order No. 35 / P / 2011).
Member
 Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal

Interview (newspaper / magazine)

Activity description Newspaper / Forum
2016/11/30 Indústria 4.0 - Nova indústria, novos empregos, nova economia. Entrevista publicada no Negócios em Rede, suplemento do Jornal de Negócios, pp. I a VIII, quarta-feira, 30 de Novembro de 2016, Diário, Ano XV, N.º 3388. Negócios em Rede, suplemento do Jornal de Negócios
2016/07 Matias, R. e Mário J.G.C. Mendes, Prémio Nova Geração - Na vanguarda da educação. Entrevista publicada na Revista Siemens | Magazine by Diálogo Era 4.0: o futuro em Portugal, pp. 42-43, Julho 2016. Revista Siemens | Magazine by Diálogo

Journal scientific committee

Journal title (ISSN) Publisher
2008 - Current https://www.webofscience.com/wos/author/record/1183730

Other jury / evaluation

Activity description Institution / Organization
2007 - 2019 Member of the Jury of the exams of access and admission to ISEL (Licenciatura courses) for students over 23 years old (M23), since the academic year 2007/2008. Only in 2010 I was not a member of this jury. These exams later became: Exams for students who enter ISEL through special access modalities - students over 23 years old - M23, holders of a technological specialization diploma - DETs and holders of a higher professional technician diploma - DTSPs. Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2016/11 - 2016/12 Member of the Jury of the 1st edition of the Annual Competition for Research, Development, Innovation and Artistic Creation Projects (IDI & CA) of the Polytechnic Institute of Lisbon, IDI & CA 2016. Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
Distinctions

Award

2022 2nd place in the 2022 H-INNOVA Award (3rd edition)
H-INNOVA - Health INNOVAtion HUB (Promotor: PremiValor Consulting), Portugal
2019 Top Peer Reviewer Award - top 1 % of reviewers in Engineering on Publons global reviewer database
Clarivate Analytics Inc, United States
2019 Top Peer Reviewer Award - top 1 % of reviewers in Cross-Field on Publons global reviewer database
Clarivate Analytics Inc, United States
2018 Journal of Process Control Reviewer Award
Elsevier BV, Netherlands
2018 Publons Peer Review Awards - top 1 % of peer reviewers in Engineering
Clarivate Analytics Inc, United States
2017 Publons Peer Review Awards - top 1 % of peer reviewers in Energy
Clarivate Analytics Inc, United States
2016 Renewable Energy Reviewer Award
Elsevier BV, Netherlands
2015 The New Generation|15 award - SIEMENS
Siemens SA, Portugal

Other distinction

2009 Louvor - Coordinating Committee of the Scientific Council of ISEL
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2009 Scholarship/Subsidy (PAEGTD / 4171/2009) to Support the Graphic Execution of Doctoral Theses
Fundação para a Ciência e a Tecnologia, Portugal
2007 Scholarship/Subsidy (Process No. 21-88095-S) from the Calouste Gulbenkian Foundation to Participate in International Congresses
Fundação Calouste Gulbenkian, Portugal
2005 Louvor - CEEM - Center for Studies in Mechanical Engineering at ISEL
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2003 Scholarship from the Educational Development Program for Portugal (PRODEP) III / Measure 5 / Action 5.3: Advanced Training of Higher Education Teachers
Ministério da Educação, Portugal

Fundação para a Ciência e a Tecnologia, Portugal
2001 Scholarship from the European Research Network DAMADICS (Development and Application of Methods for Actuator Diagnosis in Industrial Control Systems) - HPRN-CT-2000-00110
European Union, Belgium
1998 Grant awarded to the best curricular internship - PRODEP II/Medida 5/Acção 5.2: Advanced Training in Higher Education
Ministério da Educação, Portugal

Fundação para a Ciência e a Tecnologia, Portugal