???global.info.a_carregar???
Helena Bártolo is a Professor in Civil Engineering at the Polytechnic of Leiria (PIL), Portugal. She holds a PhD degree in Construction Management from the University of Reading UK, a Master in Structural Engineering from the University of Porto and a Licenciatura (5 year) from the University of Coimbra, both from Portugal. She got a NATO fellowship to undertake PhD studies in the United Kingdom. Helena is a member of the Research Centre for Architecture, Urbanism and Design (CIAUD) from the University of Lisbon, and was a founding member of the PIL Centre on Rapid and Sustainable Product Development. She was Director of the School of Technology from the Polytechnic Institute of Cavado and Ave (IPCA), Barcelos, Portugal. She is author and co-author of more than 80 scientific articles published in peer review scientific journal, books, conference proceedings, and served as referee for international peer review journals, namely Automation in Construction, Virtual and Physical Prototyping, Energy and Buildings and Construction Management & Engineering. She has experience in supervising master, doctoral and post-doctoral students, as well in participating on fundamental and applied research projects funded by the European Commission, the Portuguese Innovation Agency, the Portuguese Foundation for Science and Technology, the Portuguese Institute for SMEs (IAPMEI), as well as the Industry. She was Conference Chair in several International Conferences, namely the first edition of the International Conference on Sustainable Smart Manufacturing (S2M 2016), and the two editions of the International Conference on Sustainable Intelligent Manufacturing International Conference (SIM 2013 and SIM 2011), and member of the Scientific Committee of several international Conferences. She was also a member of the Organizing Committee of several international Conferences, such as the 2nd edition of the International Conference on Sustainable Smart Manufacturing (S2M 2019) in Manchester, UK, and several editions (2005, 2007, 2009, 2011 and 2013) of the Advanced International Conference Research in Virtual and Rapid Prototyping (VRAP). She has also organized several national and international symposiums, workshops and seminars. She is a member of several international construction networks, such as INTBAU (International Network for traditional Building, Architecture & Urbanism). She was also a member of ARCOM (Association of Researchers for Construction Management), CIB (International Council for Research and Innovation in Building and Construction), DRS (Design Research Society) and AKPIA (Aga Khan Program for Islamic Architecture). Her main research interests are sustainable construction, sustainable green materials, bio-inspired materials, circular construction, smart materials for construction, and advanced additive manufacturing processes, such as 3D printing technologies.
Read full resume ↓
Identification

Personal identification

Full name
Helena Maria Bártolo
Gender
Female

Citation names

  • Bártolo, Helena
  • Bártolo, H.
  • Galha, H.

Author identifiers

Ciência ID
BD1F-2B6E-07AF
ORCID iD
0000-0002-0261-9259

Email addresses

  • helena.bartolo@ipleiria.pt (Professional)

Addresses

  • Instituto Politécnico de Leiria. Escola Superior de Tecnologia e Gestão, Campus 2 - Morro do Lena, Alto do Vieiro, Apt 4163, Edifício D, 2411-901 L, Leiria, Leiria, Portugal (Professional)
  • Centro de investigação em Arquitetura, Urbanismo e Design (CIAUD) - Faculdade de Arquitetura da Universidade de Lisboa (FA/Ulisboa). Rua Sá Nogueira - Pólo Universitário - Alto da Ajuda, , 1349-055 , Lisboa, Lisboa, Portugal (Professional)

Knowledge fields

  • Engineering and Technology - Civil Engineering - Construction Engineering
  • Engineering and Technology - Civil Engineering - Architecture Engineering
  • Humanities - Arts - Architectural design

Languages

Language Speaking Reading Writing Listening Peer-review
English Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2)
French Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Portuguese (Mother tongue)
Education
Degree Classification
2004
Concluded
 PhD in Construction (Doctor of Philosophy)
University of Reading, United Kingdom
1986
Concluded
 Engenharia Civil (Mestrado)
Universidade do Porto, Portugal
1982
Concluded
 Engenharia Civil (Licenciatura)
Universidade de Coimbra, Portugal
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2012/01 - Current Teacher Coordinator (Polytechnic Teacher) Instituto Politécnico de Leiria, Portugal
Instituto Politécnico de Leiria, Portugal
1989/12 - 2011/12 Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico de Leiria, Portugal
Instituto Politécnico de Leiria, Portugal
1989/09 - 1989/12 Invited Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico de Leiria, Portugal
Instituto Politécnico de Leiria, Portugal
1985/04 - 1989/09 Assistant (University Teacher) Universidade da Beira Interior, Portugal
Universidade da Beira Interior, Portugal

Positions / Appointments

Category
Host institution 		Employer
2004/10/21 - 2006/03/12 Organic Unit Director Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
Instituto Politécnico do Cávado e do Ave Escola Superior de Tecnologia, Portugal
Projects

Grant

Designation Funders
2022/01 - 2024/01 CulTourData - Supporting data-driven innovation for tourism SMEs in European Capital of Culture
GRANT AGREEMENT NUMBER 101038124
URL
GRANT AGREEMENT NUMBER 101038124
Researcher
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
 European Commission
Concluded
2009/10/01 - 2011/12/31 Plataforma Colaborativa para o Projeto Sustentado de Edifícios (Build-it­ Greeen)
N/A
Principal investigator
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
Concluded
2008 - 2009 lnnovative Sustainable Building Technology Development
N/A
Principal investigator
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
 British Council Portugal
Concluded

Contract

Designation Funders
2013/07/15 - 2017/07/14 IINFINITY - International Fellowship IN transdisciplinarlTY
545681-EM-1-2013-1-PT-ERA MUNDUS-EMA21
Researcher
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 European Commission
Concluded
2013/12/01 - 2015/01/20 RETHINK - Reform of Education THru INternational Knowledge exchange
544178-TEMPUS-1-2013-1-PT-TEMPUS-JPCR
Principal Investigator at Leiria Polytechnic
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 European Commission
Concluded
2010/11 - 2013/10 ToolingEDGE - Produção sustentável de elevado desempenho
Researcher
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 Agência Nacional de Inovação SA
Concluded
2010/04/01 - 2013/09/30 TyRE + Tyre recycling for advanced hybrid moulding of plastic components
N/A
Researcher
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 Comissão de Coordenação e Desenvolvimento Regional do Centro
Concluded
2006/10/01 - 2008/11/30 Cast Products and Mould Designer Skills at the European Context (CAE DS)
2006 Fl-06-B-F-PP-160733
Researcher
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
 European Commission
Concluded

Other

Designation Funders
2010/10/01 - 2014/10/30 SUNAITECVOLT
NA
Principal investigator
Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
 Comissão de Coordenação e Desenvolvimento Regional do Centro
Concluded
Outputs

Publications

Book
  1. Almeida, Henrique. Corresponding author: Almeida, Henrique. Progress in Digital and Physical Manufacturing. Switzerland: Springer International Publishing. 2023.
    Published • 10.1007/978-3-031-33890-8 • Editor
  2. Paulo Jorge da Silva Bartolo; da Silva, Fernando Moreira; Jaradat, Shaden; Bártolo, Helena. Industry 4.0 - Shaping The Future of The Digital World. Londres, United Kingdom: CRC Press. 2020.
    Published • Editor
  3. Almeida, Henrique; Vasco, Joel; Marto, Anabela; Capela, Carlos; Freitas, Dino; Craveiro, Flávio; Bártolo, Helena; et al. International Conference on Progress in Digital and Physical Manufacturing ProDPM'19 - Book of Abstracts. Instituto Politécnico de Leiria. 2019.
    https://doi.org/10.25766/2SGV-K049
  4. 1138001376. High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping. London, United Kingdom: CRC Press. 2014.
    Published • 10.1201/b15961 • Editor
  5. Craveiro, F.; Bártolo, H.; Bártolo, P.. Functionally graded structures through building manufacturing. 2013.
    10.4028/www.scientific.net/AMR.683.775
  6. Bartolo, H.; Da Silva Bartolo, P.J; Alves, N.M.F; Mateus, A.J.; Almeida, H.A; Lemo, A.C.S; Craveiro, F.; et al. Green Design, Materials and Manufacturing Processes. London, United Kingdom: CRC Press. 2013.
    Published • Editor
  7. Bártolo, Helena. Innovative Developments in Virtual and Physical Prototyping. London, United Kingdom: CRC Press - Taylor & Francis Group. 2012.
    Published • 10.1201/b11341 • Editor
  8. Bartolo, Paulo. Corresponding author: Bartolo, Paulo. Virtual and Rapid Manufacturing - Advanced Research in Virtual and Rapid Prototyping. London, United Kingdom: CRC Press - Taylor & Francis Group. 2008.
    Published • Editor
  9. Bartolo, Paulo. Corresponding author: Bartolo, Paulo. Virtual modeling and rapid manufacturing. London, United Kingdom: CRC Press - Taylor & Francis Group. 2005.
    Published • Editor
Book chapter
  1. Tarhan, Yesim; Tarhan, Ismail Hakki; Craveiro, Flavio; Bartolo, Helena. "Building a Sustainable Future: Examining the Impact of Earth-Based Materials on Civil Engineering Development". In Proceedings of the 3rd International Conference on Water Energy Food and Sustainability (ICoWEFS 2023), 581-590. London, United Kingdom: Springer Nature Switzerland, 2024.
    Published
  2. Librelotto, Lisiane; Ferroli, Paulo; Fahfouhi, Karim; Craveiro, Flávio; Bártolo, Helena. "The Potential of Earth as a Construction Material: Review and Perspectives". In Proceedings of the 3rd International Conference on Water Energy Food and Sustainability (ICoWEFS 2023), 623-633. London, United Kingdom: Springer Nature Switzerland, 2024.
    Published
  3. Fahfouhi, Karim; Craveiro, Flávio; Bártolo, Helena. "The Role of Construction 3D Printing in Advancing Sustainability and Digitalization in Africa". In Proceedings of the 3rd International Conference on Water Energy Food and Sustainability (ICoWEFS 2023), 613-622. London, United Kingdom: Springer Nature Switzerland, 2024.
    Published • 10.1007/978-3-031-48532-9_57
  4. Librelotto, Lisiane Ilha; Ferroli, Paulo Cesar Machado; Marcelino, Mariana Rodrigues; Carbonari, Luana; Craveiro, Flávio; Bártolo, Helena. "Infrashelter Platform: Analysis of Materials Applied in Furniture Solutions for Planned Temporary Camps (PTC) in Disaster Scenarios". In Lecture Notes on Multidisciplinary Industrial Engineering, 212-221. London: Springer Nature Switzerland, 2024.
    Published • 10.1007/978-3-031-80330-7_23
  5. Kabakus, Nuriye; Tarhan, Yesim; Craveiro, Flavio; Bartolo, Helena. "Physical Properties of Earth-Based Materials Stabilised with Biopolymer Binder". In Lecture Notes on Multidisciplinary Industrial Engineering, 195-201. London, United Kingdom: Springer Nature Switzerland, 2024.
    Published • 10.1007/978-3-031-80330-7_21
  6. Fahfouhi, Karim; Varum, Humberto; Almeida, Henrique; Craveiro, Flávio; Bártolo, Helena. "Reshaping Africa’s Sustainable Future Through 3D Printing". In Lecture Notes on Multidisciplinary Industrial Engineering, 186-194. London, United Kingdom: Springer Nature Switzerland, 2024.
    Published • 10.1007/978-3-031-80330-7_20
  7. Tarhan, Yesim; Craveiro, Flavio; Bartolo, Helena. "An Effective Solution for Reinforcing 3D Concrete Printable Composites". In Proceedings of the 2nd International Conference on Water Energy Food and Sustainability (ICoWEFS 2022), 396-405. Springer International Publishing, 2023.
    Published • 10.1007/978-3-031-26849-6_41
  8. Librelotto, Lisiane; Ferroli, Paulo; Craveiro, Flávio; Bártolo, Helena. "A Model to Evaluate the Sustainability of Buildings Within Urban Environments". In Proceedings of the 2nd International Conference on Water Energy Food and Sustainability (ICoWEFS 2022), 480-488. Springer International Publishing, 2023.
    10.1007/978-3-031-26849-6_49
  9. Fahfouhi, Karim; Freitas, Dino; Poullain, Philippe; Craveiro, Flávio; Bártolo, Helena. "Digital Fabrication in Construction Industry in Africa". In Proceedings of the 2nd International Conference on Water Energy Food and Sustainability (ICoWEFS 2022), 470-479. Springer International Publishing, 2023.
    Published • 10.1007/978-3-031-26849-6_48
  10. Tarhan, Yesim; Craveiro, Flavio; Bartolo, Helena. "An Overview of Binder Materials - Sustainability for 3D Printing in Construction". In Progress in Digital and Physical Manufacturing, 291-302. Switzerland: Springer International Publishing, 2023.
    Published • 10.1007/978-3-031-33890-8_26
  11. Joshi, Arpan; Poullain, Philippe; Craveiro, Flávio; Bártolo, Helena. "Earth as a Construction Material for Sustainable 3D Printing: Rheological Aspect". In Progress in Digital and Physical Manufacturing, 270-280. Switzerland: Springer International Publishing, 2023.
  12. Fahfouhi, Karim; Craveiro, Flávio; Bártolo, Helena; Philippe Poullain. "A study on fresh properties of novel earth-based composites for digital construction". In Proceedings of the International Conference on Design of 3D Printing. Singapore: Springer, 2023.
    In press
  13. Fahfouhi, Karim; Almeida, Henrique; Dino Miguel Freitas; Craveiro, Flávio; Bártolo, Helena. "Investigating raw earth construction in Morocco: actual and future prospects". In Proceedings of the 2nd International Conference on Progress in Digital and Physical Manufacturing (ProDPM'21). Portugal: Springer, 2023.
    Published
  14. Yesim Tarhan; Ismail Hakki Tarhan; Craveiro, Flávio; Bártolo, Helena. "Building a Sustainable Future: Examining the Impact of Earth-Based Materials on Civil Engineering Development". In Proceedings of the 3rd International Conference on Water Energy Food and Sustainability (ICoWEFS 2023). Springer Cham, 2023.
    In press
  15. LIbrelotto, Lisiane Ilha; Ferroli, Paulo Cesar Machado; Craveiro, Flávio; Bártolo, Helena. "A Contribution to Overcome Water Management Challenges in Brazil". In Proceedings of the 1st International Conference on Water Energy Food and Sustainability (ICoWEFS 2021), edited by João Rafael da Costa Sanches Galvão; Paulo Sérgio Duque de Brito; Filipe dos Santos Neves; Flávio Gabriel da Silva Craveiro; Henrique de Amorim Almeida; Joel Oliveira Correia Vasco; Luís Miguel Pires Neves; et al, 763-771. Cham, Switzerland: Springer International Publishing, 2021.
    Published
  16. Joshi, Arpan; Craveiro, Flávio; Bártolo, Helena. "A Review on the Application of Palm Oil Fuel Ash in Concrete as a Cementitious Material for Construction". In Proceedings of the 1st International Conference on Water Energy Food and Sustainability (ICoWEFS 2021), edited by João Rafael da Costa Sanches Galvão; Paulo Sérgio Duque de Brito; Filipe dos Santos Neves; Flávio Gabriel da Silva Craveiro; Henrique de Amorim Almeida; Joel Oliveira Correia Vasco; Luís Miguel Pires Neves; et al, 717-726. Cham, Switzerland: Springer International Publishing, 2021.
    Published
  17. Tarhan, Yesim; Tarhan, Ismail Hakki; Craveiro, Flávio; Bártolo, Helena. "Sustainable Materials for Additive Manufacturing: Earth-Based Concrete". In Proceedings of the 1st International Conference on Water Energy Food and Sustainability (ICoWEFS 2021), edited by João Rafael da Costa Sanches Galvão; Paulo Sérgio Duque de Brito;; Filipe dos Santos Neves; Flávio Gabriel da Silva Craveiro;; Henrique de Amorim Almeida; Joel Oliveira Correia Vasco; Luís Miguel Pires Neves; et al, 708-716. Cham, Switzerland: Springer International Publishing, 2021.
    Published • 10.1007/978-3-030-75315-3_75
  18. Lisiane Ilha LIbrelotto; Paulo Cesar Machado Ferroli; Flávio Craveiro; Helena Bártolo. "A Contribution to Overcome Water Management Challenges in Brazil". 2021.
    10.1007/978-3-030-75315-3_81
  19. Craveiro, F.; Duarte, J.P.; Bártolo, H.; Bártolo, P.. "Moving Forward to 3D/4D Printed Building Facades". In Progress in Digital and Physical Manufacturing, edited by Henrique de Amorim Almeida; Joel Oliveira Correia Vasco, 277-282. Cham, Switzerland: Springer International Publishing, 2020.
    Published • 10.1007/978-3-030-29041-2_35
  20. Helena Maria Galha Bártolo; da Silva Bartolo, Paulo Jorge; Flávio Gabriel da Silva Craveiro; josé manuel pinto duarte. "A multi-material extrusion nozzle for functionally graded concrete printing". In Industry 4.0 - Shaping The Future of The Digital World, edited by Bártolo, Helena; da Silva Bartolo, Paulo Jorge; da Silva, Fernando Moreira (0000-0002-5972-7787); Jaradat, Shaden, 130-135. London, United Kingdom: CRC Press/Balkema - Taylor & Francis Group, 2020.
    Published • DOI: 10.1201/9780367823085
  21. Bártolo, Helena; Craveiro, Flávio; Vitor Manuel Ferreira lopes; Sharath Vijayakumar. "Prefabrication in construction: a preliminary study in India and Portugal". In Industry 4.0 - Shaping The Future of The Digital World, edited by Helena Maria Galha Bártolo; Paulo Jorge da Silva Bartolo; Fernando Moreira da Silva; Shaden Jaradat, 325-330. London, United Kingdom: CRC Press/Balkema - Taylor & Francis Group, 2020.
    Published • 10.1201/9780367823085
  22. scheer J. Corresponding author: scheer J. "User’s quality perception in classroom design.- a case study". In Empirical Constructivism in Europe, edited by scheer J; Catina A. Germany: Verlag, 2020.
    Published
  23. Vieira, Ana; Bártolo, Helena; Mitchell, Geoffrey; Bártolo, Paulo. "Phase change materials as a tool for climate change mitigation". In High Value Manufacturing - Advanced Research in Virtual and Rapid Prototyping, 211-216. London, United Kingdom: CRC Press - Taylor & Francis Group, 2014.
    Published
  24. Vieira, A.P.; Bartolo, H.; Mitchell, G.R.; Bartolo, P.. "Phase change materials as a tool for climate change mitigation". In Green Design, Materials and Manufacturing, 605-612. London, United Kingdom: CRC Press - Taylor & Francis Group, 2013.
    Published • 10.1201/B15002-117
  25. Vieira, A.P.; Bártolo, H.; Mitchell, G.R.; Bártolo, P.. "Phase change materials as a tool for climate change mitigation". In Green Design, Materials and Manufacturing Processes, 605-610. London, United Kingdom: CRC Press - Taylor & Francis Group, 2013.
    Published • 10.1201/b15002-117
  26. Almeida, H.A.; Ramos, C.A.; Bártolo, H.; Bártolo, P.. "Evaluating the impact of glass and PET packaging for bottled water". In Green Design, Materials and Manufacturing Processes, 345-350. London, United Kingdom: CRC Press - Taylor & Francis Group, 2013.
    Published
  27. Santos, A.L.; Almeida, H.; Bártolo, H.; Bártolo, P.. "Integrated strategy for sustainable product development". In Innovative Developments in Virtual and Physical Prototyping, 807-812. London, United Kingdom: CRC Press - Taylor & Francis Group, 2012.
    Published • 10.1201/b11341-130
  28. Craveiro, F.; Matos, J.M.; Bártolo, H.; Bártolo, P.J.. "Automation for building manufacturing". In Innovative Developments in Virtual and Physical Prototyping, 451-455. London, United Kingdom: CRC Press - Taylor & Francis Group, 2012.
    Published
  29. Bártolo, Helena. "Integrated strategy for sustainable product development". In Innovative Developments in Virtual and Physical Prototyping. CRC Press, 2011.
  30. Bártolo, Helena; Bartolo, Paulo. "A learning-based design tool". In System-based vision for strategic and creative design, edited by F. Bontempi, 1531-1536. Lisse, Netherlands: A. A. Balkema Publishers, 2003.
    Published
  31. Bártolo, Helena; Bartolo, Paulo. "The importance of new information technologies in a concurrent design environment". In System-based vision for strategic and creative design, edited by Bontempi F. Lisse, Netherlands: A. A. Balkema Publishers, 2003.
    Published
  32. Bártolo, Helena; Bartolo, Paulo. "A knowledge based design system". In Innovative Developments in Architecture, Engineering and Construction, edited by Anumba, C.J., 193-204. Rotterdam, Netherlands: Millpress, 2003.
    Published
  33. Bártolo, Helena; Bartolo, Paulo. "Learning from biological systems". In Innovative Developments in Architecture, Engineering and Construction, edited by C. J. Anumba, 345-354. Rotterdam, Netherlands: Millpress, 2003.
    Published
Conference paper
  1. Craveiro, F.; Bártolo, H.; Duarte, J.P.; Bártolo, P.J.. "Customizing insulation material properties for building retrofitting: From infrared thermography to additive manufacturing". Paper presented in Pro-AM Conference, Singapore, 2018.
    Published • 10.25341/D4MS3F
  2. Craveiro, F.; Bártolo, H.; Duarte, J.P.; Bártolo, P.J.. "Designing cork-based functionally-graded concrete walls". 2017.
    10.1201/9781315198101-86
  3. Broumandi, S.; Zarrabi, P.; Bártolo, H.. "Energy efficiency in residential buildings in Tehran: A case study". 2017.
    10.1201/9781315198101-3
  4. Craveiro, F.; Almeida, H.; Bártolo, H.; Bártolo, P.J.; Duarte, J.P.. "Topology and material optimization of architectural components". 2017.
    10.1201/9781315198101-17
  5. Craveiro, F.; Bártolo, H.; Duarte, J.P.; Bártolo, P.J.. Corresponding author: Craveiro, F.. "A strategy to locally optimize the material composition of am construction elements". Paper presented in Pro-AM 2016, Singapore, 2016.
    Published
  6. Vieira, A.P.; Bartolo, H.; Mitchell, G.R.; Bartolo, P.. "Phase change materials as a tool for climate change mitigation". 2014.
  7. Santos, Ana L.; Almeida, Henrique A.; Bártolo, Helena; Bártolo, Paulo J.. "A Decision Tool for Green Manufacturing While Utilizing Additive Process". Paper presented in ESDA 2012 - ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, Nantes, 2012.
    Published
  8. Craveiro, F.; De Matos, J.M.; Bártolo, H.; Bártolo, P.. "An innovation system for building manufacturing". Paper presented in ESDA 2012 - ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, Nantes, 2012.
    Published • 10.1115/ESDA2012-82772
  9. Santos, A.L.; Almeida, H.A.; Bártolo, H.; Bártolo, P.J.. "A decision tool for green manufacturing while utilizing additive process". 2012.
    10.1115/ESDA2012-82764
Edited book
  1. Challenges for Technology Innovation: An Agenda for the Future. London, United Kingdom: CRC Press. 2017.
    Published • Editor
  2. Bártolo, Helena. High Value Manufacturing – Advanced Research in Virtual and Rapid Prototyping. CRC Press. 2013.
    Editor
Journal article
  1. Müller, Julian M.; Kazantsev, Nikolai; Allmendinger, Richard; Salehi-Amiri, Amirhossein; Reis, Jacqueline Zonichenn; Jaradat, Shaden; Bartolo, Helena; Da Silva Bartolo, Paulo Jorge. "How to engineer sustainability: from resource-wise manufacturing towards ecosystem-wide impacts". Sustainability Accounting, Management and Policy Journal (2024): https://doi.org/10.1108/sampj-03-2024-0305.
    Published • 10.1108/sampj-03-2024-0305
  2. Priadko, Iurii; Rudnieva, Iryna; Ribakov, Yuri; Bartolo, Helena. "A new approach to the design of suspension roof systems". Strength of Materials and Theory of Structures 104 1 (2020): 191-220. http://dx.doi.org/10.32347/2410-2547.2020.104.191-220; http://omtc.knuba.edu.ua/issue/view/12588;.
    Open access • Published • 10.32347/2410-2547.2020.104.191-220
  3. Librelotto, Lisiane Ilha; Kekez, Marija; Bártolo, Helena Maria Galha. "The environmental impact of an ETICS layer- a case of study with life cycle assessment from environmental product declaration in Portugal". MIX Sustentável 6 2 (2020): 139-148. http://dx.doi.org/10.29183/2447-3073.mix2020.v6.n2.139-148.
    Published • 10.29183/2447-3073.mix2020.v6.n2.139-148
  4. Craveiro, Flávio; Nazarian, Shadi; Bartolo, Helena; Bartolo, Paulo Jorge; Pinto Duarte, José. "An automated system for 3D printing functionally graded concrete-based materials". Additive Manufacturing 33 101146 (2020): 1-10. http://dx.doi.org/10.1016/j.addma.2020.101146.
    Published • 10.1016/j.addma.2020.101146
  5. Bártolo, Helena; da Silva Bartolo, Paulo Jorge; josé manuel pinto duarte; Flávio Gabriel da Silva Craveiro. "Additive manufacturing as an enabling technology for digital construction: A perspective on Construction 4.0". Automation in Construction 103 (2019): 251-267. http://dx.doi.org/10.1016/j.autcon.2019.03.011.
    Published • 10.1016/j.autcon.2019.03.011
  6. Craveiro, F.; Bartolo, H.M.; Gale, A.; Duarte, J.P.; Bartolo, P.J.. "A design tool for resource-efficient fabrication of 3d-graded structural building components using additive manufacturing". Automation in Construction 82 (2017): 75-83. http://dx.doi.org/10.1016/j.autcon.2017.05.006.
    Published • 10.1016/j.autcon.2017.05.006
  7. Priadko, I.N.; Mushchanov, V.P.; Bartolo, H.; Vatin, N.I.; Rudnieva, I.N.. "Improved numerical methods in reliability analysis of suspension roof joints". Magazine of Civil Engineering 65 05 (2016): 27-41. http://dx.doi.org/10.5862/mce.65.3.
    Published • 10.5862/mce.65.3
  8. Freitas, D.; Almeida, H.A.; Bártolo, H.; Bártolo, P.J.. "Sustainability in extrusion-based additive manufacturing technologies". Progress in Additive Manufacturing 1 1-2 (2016): 65-78. http://www.scopus.com/inward/record.url?eid=2-s2.0-85030865179&partnerID=MN8TOARS.
    10.1007/s40964-016-0007-6
  9. Craveiro, F.; Almeida, H.A.; Durão, L.; Bártolo, H.; Bártolo, P.. "Rapid construction with functionally graded designs". Green Design, Materials and Manufacturing Processes - Proceedings of the 2nd International Conference on Sustainable Intelligent Manufacturing, SIM 2013 (2013): 545-550. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880119951&partnerID=MN8TOARS.
  10. Bartolo, H.. "Green Design, Materials and Manufacturing Processes - Proceedings of the 2nd International Conference on Sustainable Intelligent Manufacturing, SIM 2013". Green Design, Materials and Manufacturing Processes - Proceedings of the 2nd International Conference on Sustainable Intelligent Manufacturing, SIM 2013 (2013): http://www.scopus.com/inward/record.url?eid=2-s2.0-84891346585&partnerID=MN8TOARS.
  11. Vieira, A.P.; Bártolo, H.; Mitchell, G.R.; Bártolo, P.. "Phase change materials as a tool for climate change mitigation". Green Design, Materials and Manufacturing Processes - Proceedings of the 2nd International Conference on Sustainable Intelligent Manufacturing, SIM 2013 (2013): 605-610. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880095256&partnerID=MN8TOARS.
  12. Almeida, H.A.; Ramos, C.A.; Bártolo, H.; Bártolo, P.. "Evaluating the impact of glass and PET packaging for bottled water". Green Design, Materials and Manufacturing Processes - Proceedings of the 2nd International Conference on Sustainable Intelligent Manufacturing, SIM 2013 (2013): 345-350. http://www.scopus.com/inward/record.url?eid=2-s2.0-84880108710&partnerID=MN8TOARS.
Journal issue
  1. da Silva Bartolo, Paulo Jorge; Helena Maria Galha Bártolo. "Construction 4.0: Challenges, Trends and Achievements - a special issue of MDPI Buildings". MDPI Buildings 1 (2022): https://www.mdpi.com/journal/buildings/special_issues/Construction_Challenges_Trends_Achievements.
    Accepted • Coeditor
Magazine article
  1. Lisiane LIBRELOTTO; Paulo FERROLI; Helena BÁRTOLO; Cláudia VASCONCELOS. "Building with earth - past and future", IMPACT projects, 2022, https://doi.org/10.59279/impact.v1i2.2077 https://periodicos.unifesspa.edu.br/index.php/impactprojects/issue/view/50.
    10.59279/impact.v1i2.2077
Activities

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2017/11/10 - 2028/12/17 Prefabrication in construction: an exploratory study of advantages and challenges in India and Portugal
Supervisor of Vijayakumar, Sharath Bandi
 Engenharia Civil - Construções Civis (Master)
Instituto Politécnico de Leiria, Portugal
2021 - 2022/11/21 3D Printing of raw earth composites - Effect of low environmental impact binder on the process and material properties -Master thesis - http://hdl.handle.net/10400.8/8034
Supervisor of Karim Fahfouhi
 Master in Civil Engineering - Construction - Polytechnic of Leiria (Master)
Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2019/11/01 - 2020/12/28 Development of fibre-reinforced earth-based composites for 3D printing in construction (http://hdl.handle.net/10400.8/5411)
Supervisor of Arpan Joshi
 Engenharia Civil - Construções Civis (Master)
Instituto Politécnico de Leiria, Portugal
2015/01/03 - 2020/01/06 AUTOMATED MULTI-MATERIAL FABRICATION OF BUILDINGS, PhD thesis (https://www.repository.utl.pt/feed/atom_1.0/10400.5/425) Student - Flávio Gabriel da Silva Craveiro Supervisors: Paulo Jorge da Silva Bártolo - University of Manchester, UK José Pinto Duarte - Lisbon School of Architecture (university of Lisbon) and Penn State University (USA) Helena Bártolo - Polytechnic of Leiria (http://hdl.handle.net/10400.5/20170)
Co-supervisor of Flávio Gabriel da Silva Craveiro
 Phd (PhD)
Universidade de Lisboa Faculdade de Arquitectura, Portugal
2017/02/05 - 2018/04/24 A novel digital framework for the construction industry - http://hdl.handle.net/10400.8/3319
Supervisor of Zarrabi, Pooria
 engenharia civil- construções civis (Master)
Instituto Politécnico de Leiria, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2021/10/27 - 2021/10/29 2nd International Conference on Progress in Digital and Physical Manufacturing (ProDPM'21 - http://www.prodpm.ipleiria.pt/organizing.html) was organized by the School of Technology and Management (ESTG) of the Polytechnic of Leiria (IPL). This international event aimed at scientific networking and exchanging ideas in the fields of digital and physical construction/manufacturing and related areas. (2021/10/27 - 2021/10/29)
Conference (Member of the Organising Committee)
 Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2019/10/02 - 2019/10/04 the first International Conference on Progress in Digital and Physical Manufacturing (ProDPM'19), organized by the Polytechnic of Leiria (PIL), aiming at providing a major international forum for the scientific exchange of ideas in the field of digital and physical manufacturing and related areas. (2019/10/02 - 2019/10/04) Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2019/04/09 - 2019/04/11 The 2nd International Conference on Sustainable Smart Manufacturing (S2M 2019), part of the Industry 4.0 Academia Summit, hosted by The University of Manchester on April 2019, was jointly organised by MACE (University of Manchester), UK, Lisbon School of Architecture (University of Lisbon) and School of Technology and Management (Polytechnic of Leiria) bringing in a wealth of expertise in how Industry 4.0 manifests itself in the context of sustainably evolving, deeply-rooted cities. (2019/04/09 - 2019/04/11)
Congress (Co-organisor)
 Universidade de Lisboa Centro de Investigação em Arquitetura Urbanismo e Design, Portugal

Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal

The University of Manchester School of Mechanical Aerospace and Civil Engineering, United Kingdom
2016/10/20 - 2016/10/22 1st International Conference on Sustainable Smart Manufacturing (S2M) took place at Lisbon on October 20-22, 2016. This international event was jointly organized by the Faculty of Architecture - University of Lisbon, the School of Technology and Mangement (Polytechnic of Leiria) and The University of Manchester (UK). (2016/10/20 - 2016/10/22) Universidade de Lisboa Centro de Investigação em Arquitetura Urbanismo e Design, Portugal

Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal

The University of Manchester School of Mechanical Aerospace and Civil Engineering, United Kingdom
2013/06/26 - 2013/06/29 2nd International Conference on Sustainable Intelligent Manufacturing (SIM 2013) was conjointly organized by the Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, and the Faculty of Architecture, Technical University of Lisbon, taking place at Lisbon, Portugal, from June 26 to June 29, 2013. (2013/06/26 - 2013/06/29)
Conference (Co-organisor)
 Universidade de Lisboa Centro de Investigação em Arquitetura Urbanismo e Design, Portugal

Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2011/09/28 - 2011/10/01 5th International Conference on Advanced Research in Virtual and Rapid Prototyping (VRAP2011), which took place at Leiria (Sept 28 -Oct 1) with the support of FCT and the Global Alliance of Rapid Prototyping Associations (GARPA), was a major forum for the Scientific exchange of multi disciplinary and inter-organizational aspects of virtual and physical prototyping and related areas. (2011/09/28 - 2011/10/01)
Conference (Member of the Organising Committee)
 Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2011/06/29 - 2011/07/01 1st International Conference on Sustainable Intelligent Manufacturing, that too place at Leiria (June 29 - July 1), was supported by IDEO, a company from Palo Alto, California, USA (www.ideo.com), the European Sustainable Energy Innovation Alliance (http://www.eseia.eu/) and KT-EQUAL Network, UK (http://www.sparc.ac.uk/). (2011/06/29 - 2011/07/01)
Conference (President of the Organising Committee)
 Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2009/10/09 - 2009/10/09 Workshop Innovative Sustainable Building Developments, supported by the British Council Portugal, involving invited speakers from Portugal and UK, was jointly organised by the Centre for Rapid and Sustainable Product Development, Polytechnic of Leiria and the Sustainable Design Centre, University College for the Creative Arts, UK, at Oct 9, 2009, aimed at discussing design strategies for sustainable construction. (2009/10/09 - 2009/10/09)
Workshop (Co-organisor)
 Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal
2007/09/28 - 2007/09/28 Workshop CoSpaces: human factors, user requirements and collaboration models¿ , took place in Leiria on 28th September 2007, was organised conjointly by the Centre of Rapid and Sustainable Product Development (Polytechnic of Leiria) and the Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa. This event involved speakers from Germany, Hungary, UK and Portugal (2007/09/28 - 2007/09/28)
Workshop (Co-organisor)
 Instituto Politécnico de Leiria Centro para o Desenvolvimento Rápido e Sustentado de Produto, Portugal

Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal

Committee member

Activity description
Role 		Institution / Organization
2023/05/03 - 2023/05/03 2º Simpósio de Engenharia Civil (SEC 2023) tem como principal objetivo divulgar os trabalhos académicos (Dissertação/Projeto/Estágio/Seminário ou equivalente) concluídos em 2021 ou 2022 pelos estudantes finalistas/recém-diplomados de Licenciatura e Mestrado em Engenharia Civil. Pretende-se ainda promover a mobilização e participação dos estudantes da área da Engenharia Civil e dar visibilidade aos melhores trabalhos desenvolvidos em ambiente académico ou por meio de parcerias entre a academia e a indústria.
Member
 Universidade de Lisboa Instituto Superior Técnico, Portugal
2021/05/19 - 2021/05/19 1º Simpósio de Engenharia Civil cujo principal objetivo foi fomentar a publicação científica por estudantes da Licenciatura e Mestrado em Engenharia Civil, assim como promover a troca de experiências, reflexão e discussão entre estudantes finalistas/recém-diplomados das diferentes escolas de Engenharia Civil de Portugal
Member
 Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
2013/10/01 - 2013/10/05 6th International Conference on Advanced Research in Virtual and Rapid Prototyping (VRAP 2013) a major forum for the scientific exchange of multi-disciplinary and inter-organizational aspects of virtual and rapid prototyping and related areas, gathering participants from more than 30 countries.
Member
 Instituto Politécnico de Leiria Escola Superior de Tecnologia e Gestão, Portugal
2012 - 2012 Curso de Estudos Avançados em Computação aplicada à Arquitetura, Urbanismo e Construção da Faculdade de Arquitetura da Universidade de Lisboa
Member

Conference scientific committee

Conference name Conference host
2024/05/20 - 2024/05/22 1ST INTERNATIONAL CONFERENCE ON DESIGN AND INDUSTRY ~Lisbon School of Architecture
2024/05/08 - 2024/05/10 4th International Conference on Water, Energy, Food and Sustainability (ICoWEFS 2024) instituto Politecnico de Portalegre
2023/05/10 - 2023/05/12 3rd International Conference on Water Energy Food and Sustainability (ICoWEFS 2023), taking place in Leiria (May 10-12, 2023), Portugal, aims to be a major forum to foster innovation and exchange knowledge in the water-energy-food nexus, embracing the Sustainable Development Goals (SDGs) of the Un Polytechnic of Leiria. Portugal
2022/05/10 - 2022/05/12 2nd International Conference on Water, Energy, Food and Sustainability (ICoWEFS 2022) Instituto Politécnico de Portalegre
2021/05/10 - 2021/05/12 1st International Conference on Water Energy Food and Sustainability (ICoWEFS 2021) - https://icowefs.ipleiria.pt/committees/ Instituto Politécnico de Leiria
2011/10/10 - 2011/10/12 VI International Congress of Design Research Faculdade de Arquitetura da Universidade de Lisboa

Evaluation committee

Activity description
Role 		Institution / Organization Funding entity
2011 - 2019 From 2011 to 2019, I was Vice-President of the Jury to evaluate the Master thesis/projects of the students of the ECOTEC Master of Science programme on INGENIERIE ET ECONOMIE DE LA CONSTRUCTION¿, which took place in Paris, France, at the facilities of ECOTEC (ÉCOLE SUPÉRIEURE DE ÉCONOMIE ET TECHNIQUES DE CONSTRUCTION).
Vice-President
Distinctions

Award

2012 Best poster awarded by the Direct Digital Manufacturing Conference (DDMC 2012)
Fraunhofer Direct Digital Manufacturing Conference 2012, Germany

Other distinction

2003 Best Paper awarded by the Knowledge Construction: Joint International Symposium of CIB Working Commissions on Knowledge Construction
University of Cape Town Department of Civil Engineering, South Africa

International Council for Research and Innovation in Building and Construction, Canada
1999 Best Paper Award at the Triennial CIB Symposium
1995 Bolsa de Estudos Científicos da OTAN para estudos de Doutoramento no Estrangeiro-REF. 6/A/95/PO