???global.info.a_carregar???
João Pacheco has a PhD and a MSc in Civil Engineering from IST, University of Lisbon, and is a member of fib and GPBE. João has experience in recycled aggregate concrete mix design, material characterization, and structural behaviour since 2012. His PhD thesis concerned the reliability-based adaptation of Eurocode 2 ULS formulae for the design of recycled aggregate concrete and his MSc dissertation, on the structural behaviour of recycled aggregate concrete, won a National Award by GPBE for the best MSc dissertation in structural concrete (years 2012-2014). João Pacheco is an area coordinator and project manager of the collaborative laboratory c5Lab and is currently coordinating a team of 17 researchers developing 9 research projects concerning the development of sustainable cement, mortar and concrete and is the PI of c5Lab of the ERAMIN3 transnational project RECYCL3D, which is studying the use of fine recycled aggregates for 3D printing of concrete. João has also supported Project Team WG4.T2, of WG4/CEN/TC250 in the development of standard prEN 19101: 2020 - Design of fibre-polymer composites, namely in what concerns Chapter 4: Basis of design and is currently involved in the development of an fib Bulletin for the structural design of recycled aggregate concrete, within scope of activities of fib Commision 4 - "Concrete and concrete technology", Task Group 4.7 - "Structural Applications of Recycled Aggregate Concrete: Properties, Modeling, and Design"
Read full resume ↓
Identification

Personal identification

Full name
João Nuno Pacheco

Citation names

  • Pacheco, João

Author identifiers

Ciência ID
D414-B33B-01E0
ORCID iD
0000-0001-9348-1226

Email addresses

  • joaonpacheco@ist.utl.pt (Professional)

Websites

Knowledge fields

  • Engineering and Technology - Civil Engineering - Civil Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese (Mother tongue)
English Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2)
Education
Degree Classification
2015/09 - 2020/02
Concluded
 Engenharia Civil (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Reliability analysis of eco-concrete" (THESIS/DISSERTATION)
 Pass with distinction and honour
2014
Concluded
 Engenharia Civil (Mestrado)
Major in Estruturas
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Desempenho de estruturas executadas em betão com agregados grossos reciclados provenientes da indústria de pré-fabricação" (THESIS/DISSERTATION)
 16/20
Affiliation

Science

Category
Host institution 		Employer
2020/04/16 - Current Contracted Researcher (Research) c5Lab - Sustainable Construction Materials Association, Portugal
2015/09 - Current Researcher (Research) Universidade de Lisboa Instituto de Investigação e Inovação em Engenharia Civil para a Sustentabilidade, Portugal
Projects

Grant

Designation Funders
2019/10 - 2020/04 Decarboncrete
PTDC/ECI-CON/31138/2017
Research Fellow
Universidade de Lisboa Instituto de Investigação e Inovação em Engenharia Civil para a Sustentabilidade, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2015/09 - 2019/08 Reliability analysis of eco-concrete
Provided by PTCRIS: PD/BD/113643/2015
 Fundação para a Ciência e a Tecnologia

Contract

Designation Funders
2020/04/16 - Current Use of recycled materials
c5Lab WP10/C
Researcher
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2022/05/01 - 2025/04/30 RECYCL3D - Recycled aggregates for 3D printed concrete structures
ERA-MIN3/0001/2021
Principal investigator
c5Lab - Sustainable Construction Materials Association, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2019/01/01 - 2019/12/31 Civil Engineering Research and Innovation for Sustainability
UID/ECI/04625/2019
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal

Universidade Nova de Lisboa Centro Interdisciplinar de Ciências Sociais, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2012/10 - 2014/08 BARPINP
BARPINP/AD0054/2012
Scientific Initiation Fellow
Universidade de Lisboa Instituto de Investigação e Inovação em Engenharia Civil para a Sustentabilidade, Portugal
 Programa Português Para a Investigação e Desenvolvimento Associado a Grandes Contratos Públicos
Concluded
Outputs

Publications

Book chapter
  1. Pacheco, João; de Brito, Jorge; Chastre, Carlos; Evangelista, Luís. "Recycled concrete for structural applications". In Recycled Concrete, 195-231. Elsevier, 2023.
    10.1016/b978-0-323-85210-4.00011-4
  2. Pacheco, J.; De Brito, J.; Pacheco, João; de Brito, Jorge. "Structural reliability of recycled aggregate concrete". In New Trends in Eco-efficient and Recycled Concrete, 541-572. United Kingdom: Elsevier, 2018.
    Published • 10.1016/b978-0-08-102480-5.00020-8
  3. Pacheco, João; de Brito, Jorge; Chastre, Carlos; Evangelista, Luís. "Reliability analysis: the next step towards recycled aggregates concrete affirmation". In Construction projects: improvement strategies, quality management and potential challenges, 1-54. Nova Iorque, United States: Nova Science Publishers, 2017.
    Published
Conference paper
  1. Bellei, Poliana; Veloso, J.; Flores-Colen, I.; Pacheco, João; Mendes, M. P.; Torres, I. "Argamassas de revestimento com resíduos industriais". Paper presented in Construção 2022, Guimarães, 2022.
  2. Brito, Jorge de; Pacheco, João. "Implementação da produção industrial de betão com agregados reciclados". Paper presented in Construção 2022, Guimarães, 2022.
  3. Bellei, Poliana; Veloso, J; Flores-Colen, I.; Mendes, M. P.; Pacheco, João; Torres, I.; Solstad, R.. "The use of industrial waste in coating mortars". Paper presented in ICCE2022 - Second International Conference in Construction Engineering, Damascus, 2022.
  4. Pacheco, João; Valencia, J.; Brito, Jorge de. "Comportamento no estado fresco de betão pronto com incorporação de agregados grossos reciclados". Paper presented in JPEE2022, Lisbon, 2022.
  5. Correia, J.R.; Pacheco, J.; Sørensen, J.D.; Keller, T.; Mottram, J.T.; Sena-Cruz, J.. "DESIGN OF FIBRE-POLYMER COMPOSITE STRUCTURES - EUROPEAN TECHNICAL SPECIFICATION: BASIS OF DESIGN". 2022.
  6. João Nuno Pacheco; Brito, Jorge de. "Recycled aggregate concrete: properties and behaviour, applications and production challenges". Paper presented in fib Symposium 2021: Concrete structures: New trends for eco-efficiency and performance, Lisbon, 2021.
    Published
  7. Qifan Ren; João Nuno Pacheco; Brito, Jorge de. "Geometrical model of concrete at the mesoscale: Parameters, shape description and generation strategy". Paper presented in fib Symposium 2021: Concrete structures: New trends for eco-efficiency and performance, Lisbon, 2021.
    Published
  8. Brito, Jorge de; João Nuno Pacheco. "The influence of the recycled aggregates on concrete's structural design". Paper presented in Keynote lecture of the fib Symposium 2021: Concrete structures: New trends for eco-efficiency and performance, Lisbon, 2021.
    Published
  9. Ren, Q.; Pacheco, J.; de Brito, J.. "Geometric model of concrete at mesoscale-parameters, shape description and generation strategies". 2021.
  10. Dias, A.B.; Pacheco, J.N.; Silvestre, J.D.; Martins, I.M.; de Brito, J.. "Sustainability of the use of recycled aggregates in concrete: From research to a practical application in the portuguese context". 2021.
  11. Bravo, M.; Evangelista, Luís; Pacheco, João; Brito, Jorge de; Valencia, J.. "Caracterização do Óxido de Magnésio e da Sua Incorporação em Materiais Cimentícios: Revisão Bibliográfica". Paper presented in Reabilitar & Betão Estrutural 2020, Lisbon, 2020.
  12. Bravo, M; Evangelista, L; Pacheco, João; Brito, Jorge de; Valencia, J. "Comportamento de Argamassas com Substituição Parcial de Cimento por Óxido de Magnésio de Diferentes Origens". Paper presented in Reabilitar & Betão Estrutural 2020, Lisbon, 2020.
  13. Pacheco, João; de Brito, Jorge; Chastre, Carlos; Evangelista, Luís; Pacheco, J.; De Brito, J.; Chastre, C.; Evangelista, L.. "Reliability of the bond strength of recycled coarse aggregate concrete". Paper presented in fib Symposium 2019, Cracóvia, 2019.
    Published
  14. Pacheco, João; de Brito, Jorge; Chastre, Carlos (141B-6C7F-5164); Evangelista, Luís. "Towards the structural codification of recycled aggregate concrete". Paper presented in UKIERI2019 - Concrete Builder, Jalandhar, India, 2019.
    Published
  15. Pacheco, João; de Brito, Jorge; Chastre, Carlos (141B-6C7F-5164). "Avaliação dos resultados de resistência à compressão de betão pronto produzido em centrais portuguesas". Paper presented in Betão Estrutural 2018, Lisboa, 2018.
    Published
  16. Pacheco, João; de Brito, Jorge; Chastre, Carlos (141B-6C7F-5164); Evangelista, Luís. "Model uncertainty of recycled aggregate concrete beams subjected to bending". Paper presented in HISER International Conference 2018, Delft, 2018.
    Published
  17. Pacheco, João; de Brito, Jorge; Chastre, Carlos (141B-6C7F-5164); Evangelista, Luís. "Influência da variabilidade de agregados reciclados de betão na fiabilidade de estruturas de betão". Paper presented in CLBMCS2018 - Congresso Luso Brasileiro de Materiais de Construção Sustentáveis, Coimbra, 2018.
    Published
  18. Pacheco, João. "Betões com agregados grossos reciclados provenientes da indústria de pré-fabricação - desempenho material e estrutural". Paper presented in CONPAT 2015, Lisboa, 2015.
    Published
Conference poster
  1. Pacheco, João; de Brito, Jorge; Chastre, Carlos (141B-6C7F-5164). "From 150 mm cubic to ¿150 mm x 300 mm cylindrical compressive strength of coarse recycled aggregate concrete specimens". Paper presented in ICG2019 - International Conference on Green Construction, 2019.
Journal article
  1. Ren, Qifan; Pacheco, João; de Brito, Jorge. "3D mesoscale modelling of recycled aggregate concrete". Construction and Building Materials 411 (2024): 134430. http://dx.doi.org/10.1016/j.conbuildmat.2023.134430.
    Published • 10.1016/j.conbuildmat.2023.134430
  2. Ren, Q.; Pacheco, J.; de Brito, J.; Hu, J.. "Analysis of the influence of the attached mortar's geometry on the mechanical behaviour of recycled aggregate concrete through mesoscale modelling". Engineering Fracture Mechanics 297 (2024): http://www.scopus.com/inward/record.url?eid=2-s2.0-85184139060&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2024.109876
  3. Knapcová, V.; Pacheco, J.; de Brito, J.; Sonnenschein, R.. "Eurocode 2 design of recycled aggregate concrete elements under compression: Evaluation through model uncertainties from tests on columns". Structural Concrete (2024): http://www.scopus.com/inward/record.url?eid=2-s2.0-85183872938&partnerID=MN8TOARS.
    10.1002/suco.202300715
  4. Fernando, Tomás; Arruda, M.R.T.; Pacheco, João; Eduardo Nuno Brito Santos Júlio. "Proposal for Monolithic Coefficients for Reinforced Concrete Columns Strengthened by Partial Reinforced Concrete Jacketing". Angolan Industry and Chemical Engineering Journal 3 3 (2023): Vol. 3 No. 3 (2023): Angolan Industry & Chemical Engineering SE | Angolan Industry and Chemical Engineering Journal (aincej.com).
    Published
  5. Al-Noaimat, Y.A.; Chougan, M.; Albar, A.; Skibicki, S.; Federowicz, K.; Hoffman, M.; Sibera, D.; et al. "Recycled brick aggregates in one-part alkali-activated materials: Impact on 3D printing performance and material properties". Developments in the Built Environment 16 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85173630962&partnerID=MN8TOARS.
    10.1016/j.dibe.2023.100248
  6. Ren, Q.; Pacheco, J.; de Brito, J.. "Calibration of wall effects in mesostructure modelling of concrete using marker-controlled watershed segmentation". Construction and Building Materials 398 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85165955737&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2023.132505
  7. Ren, Q.; Pacheco, J.; de Brito, J.. "Methods for the modelling of concrete mesostructures: a critical review". Construction and Building Materials 408 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85173271149&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2023.133570
  8. Ren, Q.; Pacheco, J.; de Brito, J.. "New generation and separation method for the computational modelling of the mesostructure of concrete". Engineering Fracture Mechanics 284 (2023): http://www.scopus.com/inward/record.url?eid=2-s2.0-85151807546&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2023.109212
  9. Javier Andres Forero Valencia; Miguel Bravo; João Pacheco; de Brito, J; Luis Evangelista. "Thermal Performance of Concrete with Reactive Magnesium Oxide as an Alternative Binder". Sustainability (2022): https://www.mdpi.com/2071-1050/14/10/5885.
    10.3390/su14105885
  10. Albuquerque, António; Pacheco, João; de Brito, Jorge. "Reliability-based recommendations for EN1992 carbonation cover design of concrete with coarse recycled concrete aggregates". Structural Concrete 23 3 (2022): 1873-1889. http://dx.doi.org/10.1002/suco.202100406.
    Published • 10.1002/suco.202100406
  11. Arruda, M.R.T.; Pacheco, J.; Castro, L.M.S.; Julio, E.. "A modified Mazars damage model with energy regularization". Engineering Fracture Mechanics 259 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85120790407&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2021.108129
  12. António Albuquerque; João Pacheco; Jorge de Brito. "Eurocode Design of Recycled Aggregate Concrete for Chloride Environments: Stochastic Modeling of Chloride Migration and Reliability-Based Calibration of Cover". Crystals (2021): https://www.mdpi.com/2073-4352/11/3/284.
    10.3390/cryst11030284
  13. Javier Andres Forero Valencia; Miguel Bravo; João Pacheco; de Brito, J; Luis Evangelista. "Fracture Behaviour of Concrete with Reactive Magnesium Oxide as Alternative Binder". Applied Sciences (2021): https://www.mdpi.com/2076-3417/11/7/2891.
    10.3390/app11072891
  14. Pacheco, João. "Structural safety of pultruded FRP profiles for global buckling. Part 1: Approach to material uncertainty, resistance models, and model uncertainties.". Composite Structures (2021): https://www.sciencedirect.com/science/article/abs/pii/S026382232033230X?via%3Dihub.
    10.1016/j.compstruct.2020.113304
  15. Pacheco, João. "Structural safety of pultruded FRP profiles for global buckling. Part 2: Reliability-based evaluation of safety formats and partial factor calibration". Composite Structures (2021): https://www.sciencedirect.com/science/article/abs/pii/S0263822320330737.
    10.1016/j.compstruct.2020.113147
  16. Pacheco, J.; de Brito, J.; Chastre, C.; Evangelista, L.. "Eurocode shear design of coarse recycled aggregate concrete: Reliability analysis and partial factor calibration". Materials 14 15 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85111577586&partnerID=MN8TOARS.
    10.3390/ma14154081
  17. Dias, A.B.; Pacheco, J.N.; Silvestre, J.D.; Martins, I.M.; de Brito, J.. "Environmental and economic life cycle assessment of recycled coarse aggregates: A Portuguese case study". Materials 14 18 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85115643855&partnerID=MN8TOARS.
    10.3390/ma14185452
  18. Pacheco, J.N.; de Brito, J.; Chastre, C.; Evangelista, L.. "Bond of recycled coarse aggregate concrete: Model uncertainty and reliability-based calibration of design equations". Engineering Structures 239 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85104101702&partnerID=MN8TOARS.
    10.1016/j.engstruct.2021.112290
  19. Pacheco, J.; de Brito, J.. "Recycled aggregates produced from construction and demolition waste for structural concrete: Constituents, properties and production". Materials 14 19 (2021): http://www.scopus.com/inward/record.url?eid=2-s2.0-85116165254&partnerID=MN8TOARS.
    10.3390/ma14195748
  20. Pacheco, João. "Uncertainty of shear resistance models: Influence of recycled concrete aggregate on beams with and without shear reinforcement". Engineering Structures (2020): http://dx.doi.org/10.1016/j.engstruct.2019.109905.
    10.1016/j.engstruct.2019.109905
  21. Pacheco, João. "Mechanical and Durability Properties of Concrete with Coarse Recycled Aggregate Produced with Electric Arc Furnace Slag Concrete". Applied Sciences (2019): http://dx.doi.org/10.3390/app10010216.
    10.3390/app10010216
  22. Pacheco, João. "Statistical analysis of Portuguese ready-mixed concrete production". Construction and Building Materials (2019): http://dx.doi.org/10.1016/j.conbuildmat.2019.03.089.
    10.1016/j.conbuildmat.2019.03.089
  23. João Pacheco; Jorge de Brito; Carlos Chastre; Luís Evangelista. "Probabilistic Conversion of the Compressive Strength of Cubes to Cylinders of Natural and Recycled Aggregate Concrete Specimens". Materials (2019): http://www.mdpi.com/1996-1944/12/2/280.
    10.3390/ma12020280
  24. Pacheco, J.; De Brito, J.; Chastre, C.; Evangelista, L.. "Uncertainty Models of Reinforced Concrete Beams in Bending: Code Comparison and Recycled Aggregate Incorporation". Journal of Structural Engineering (United States) 145 4 (2019): http://www.scopus.com/inward/record.url?eid=2-s2.0-85060853237&partnerID=MN8TOARS.
    10.1061/(ASCE)ST.1943-541X.0002296
  25. Pacheco, J.; de Brito, J.; Chastre, C.; Evangelista, L.. "Experimental investigation on the variability of the main mechanical properties of concrete produced with coarse recycled concrete aggregates". Construction and Building Materials 201 (2019): 110-120. http://www.scopus.com/inward/record.url?eid=2-s2.0-85059331798&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2018.12.200
  26. Pacheco, J.; De Brito, J.; Chastre, C.; Evangelista, L.; Pacheco, João. "Scatter of constitutive models of the mechanical properties of concrete: Comparison of major international codes". Journal of Advanced Concrete Technology 17 3 (2019): 102-125. http://www.scopus.com/inward/record.url?eid=2-s2.0-85064277153&partnerID=MN8TOARS.
    10.3151/jact.17.3.102
  27. Bravo, M.; de Brito, J.; Evangelista, L.; Pacheco, J.. "Durability and shrinkage of concrete with CDW as recycled aggregates: Benefits from superplasticizer's incorporation and influence of CDW composition". Construction and Building Materials 168 (2018): 818-830. http://www.scopus.com/inward/record.url?eid=2-s2.0-85042696516&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2018.02.176
  28. Bravo, M.; de Brito, J.; Evangelista, L.; Pacheco, J.. "Superplasticizer's efficiency on the mechanical properties of recycled aggregates concrete: Influence of recycled aggregates composition and incorporation ratio". Construction and Building Materials 153 (2017): 129-138. http://www.scopus.com/inward/record.url?eid=2-s2.0-85024502401&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2017.07.103
  29. Pacheco, J.; de Brito, J.; Ferreira, J.; Soares, D.. "Dynamic characterization of full-scale structures made with recycled coarse aggregates". Journal of Cleaner Production 142 (2017): 4195-4205. http://www.scopus.com/inward/record.url?eid=2-s2.0-84940094610&partnerID=MN8TOARS.
    10.1016/j.jclepro.2015.08.045
  30. De Brito, J.; Ferreira, J.; Pacheco, J.; Soares, D.; Guerreiro, M.. "Structural, material, mechanical and durability properties and behaviour of recycled aggregates concrete". Journal of Building Engineering 6 (2016): 1-16. http://www.scopus.com/inward/record.url?eid=2-s2.0-84957883371&partnerID=MN8TOARS.
    10.1016/j.jobe.2016.02.003
  31. Soares, D.; De Brito, J.; Ferreira, J.; Pacheco, J.. "Erratum: In situ materials characterization of full-scale recycled aggregates concrete structures(Construction and Building Materials (2014) 71 (237-245)". Construction and Building Materials 100 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84949626924&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2015.09.032
  32. Pacheco, J.; De Brito, J.; Ferreira, J.; Soares, D.. "Flexural load tests of full-scale recycled aggregates concrete structures". Construction and Building Materials 101 (2015): 65-71. http://www.scopus.com/inward/record.url?eid=2-s2.0-84945184740&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2015.10.023
  33. Soares, D.; De Brito, J.; Ferreira, J.; Pacheco, J.. "Erratum: Use of coarse recycled aggregates from precast concrete rejects: Mechanical and durability performance(Construction and Building Materials (2014) 71 (263-272))". Construction and Building Materials 100 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84949564677&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2015.09.031
  34. Pacheco, J.; De Brito, J.; Ferreira, J.; Soares, D.. "Destructive horizontal load tests of full-scale recycled- aggregate concrete structures". ACI Structural Journal 112 6 (2015): 815-826. http://www.scopus.com/inward/record.url?eid=2-s2.0-84945224736&partnerID=MN8TOARS.
    10.14359/51687800
  35. Soares, D.; De Brito, J.; Ferreira, J.; Pacheco, J.. "In situ materials characterization of full-scale recycled aggregates concrete structures". Construction and Building Materials 71 (2014): 237-245. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922276661&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2014.08.025
  36. Soares, D.; De Brito, J.; Ferreira, J.; Pacheco, J.. "Use of coarse recycled aggregates from precast concrete rejects: Mechanical and durability performance". Construction and Building Materials 71 (2014): 263-272. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907218904&partnerID=MN8TOARS.
    10.1016/j.conbuildmat.2014.08.034
Thesis / Dissertation
  1. Pacheco, João. "Reliability analysis of ecoconcrete". PhD, 2020.
  2. Pacheco, João. "Desempenho de estruturas executadas em betão com agregados grossos reciclados provenientes da indústria de pré-fabricação". Master, Universidade de Lisboa Instituto Superior Técnico, 2014.
Activities

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2023/09 - 2027 Strengthening of reinforced concrete columns by partial RC jacketing
Co-supervisor
 PhD in Civil Engineering (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2023/02 - 2024/08 Structural applications of 3D printed concrete
Co-supervisor
 MSc in Civil Engineering (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2022/04 - 2023/12 Structural behaviour of 3D printed concrete walls
Co-supervisor
 Civil Engineering (Master)
Instituto Politécnico de Lisboa Instituto Superior de Engenharia de Lisboa, Portugal
2019/09 - 2023/08 Finite Element Modelling of the Mechanical Behaviour of Recycled Aggregate Concrete at the Mesoscale
Co-supervisor
 Engenharia Civil (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2019 - 2020/09/01 Variability and reliability of the durability properties of coarse recycled aggregate concrete (Variabilidade e fiabilidade das propriedades de durabilidade de betão com incorporação de agregados grossos reciclados de betão)
Co-supervisor
 Engenharia Civil (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2020 - 2021/06 Organizing Committee of the fib Symposium in Lisbon (2021/06/13 - 2021/06/16)
Conference (Member of the Organising Committee)
 GPBE - Grupo Português de Betão Estrutural, Portugal

Event participation

Activity description
Type of event 		Event name
Institution / Organization
2021 - 2021 Co-chair of Session 1A: Innovation in materials and structures of the fib International PhD Symposium 2021 in Paris, 21-22 July 2021
Conference
 fib International PhD Symposium 2021
Féderation Internationale du Béton, Switzerland
2020 - 2020 Co-chair of Session 1A: Innovation in materials and structures of the fib International PhD Symposium 2020 in Paris, 26-28 August 2020
Conference
 fib International PhD Symposium 2020
Féderation Internationale du Béton, Switzerland

Association member

Society Organization name Role
2018 - Current fib - Federation Internationale du Béton member
2018 - Current GPBE - Grupo Português de Betão Estrutural member

Committee member

Activity description
Role 		Institution / Organization
2022 - Current IPQ/CT 115/GT 04 - Member of the Task Group for Fibre reinforced polymer design of the national committe CT115 (Structural Eurocodes)
Member
 Instituto Português da Qualidade, Portugal
2020/05 - Current Member of fib Commission 4: Concrete and Concrete Technology; Task Group 4.7: Structural Applications of Recycled Aggregate Concrete.
Member
 Féderation Internationale du Béton, Switzerland

Conference scientific committee

Conference name Conference host
2023/06/29 - 2023/07/01 fib International Symposium on Conceptual Design of Concrete Structures Oslo 2023 TEKNA
2021 - 2022/09 fib PhD Symposium in Rome 2022 fib; Collegio dei Tecnici della Industrializzazione Edilizia
Distinctions

Award

2014 GPBE Prémio Jovens Mestres (Best MSC dissertation in Structural Concrete by a Portuguese student)
SECIL, Portugal

GPBE - Grupo Português de Betão Estrutural, Portugal