Marzieh Hashemzadeh Khameneh Completed the Doutoramento in Naval Architecture and Marine Engineering in 2018/12/14 by Universidade de Lisboa Instituto Superior Técnico. The ph.D. thesis title is "Numerical and Experimental Study of Welded Ship Structural Components ". -Completed BSc and MSc in Naval Architecture and Marine Engineering by Amirkabir University of Technology. -Is Postdoc Researcher in Centro de Engenharia e Tecnologia Naval e Oceanica. -Published 22 articles in journals and books. Expert in: - Finite Element Analysis of complex welded ship structure accounting for welding Process; - Finite element analysis (static and dynamic) of different types of fixed and floating marine structures; - A transient thermomechanical analysis in ANSYS; - Material characterization. - Fatigue analysis and Ultimate strength analysis; - Welding test; - Experimental setup. Participated in Industry: - Design of cable laying barge (SAFF Offshore Industrial Company); - Design of submersible barge for jacket topside installation (SAFF Offshore Industrial Company); - Design of special purpose barge for Jack-up platform loadout; - NDT Test of welding for 15TH Phase of South Pars oil field in the Persian gulf: - Static and dynamic analysis, lift, upend, load out and transportation analysis of several jackets in south pars oil field by SACS software.

Personal identification

Full name
Marzieh Hashemzadeh Khameneh

Citation names

  • Hashemzadeh, M

Author identifiers

Ciência ID
E212-7BF7-74A7
ORCID iD
0000-0002-2207-1104
Google Scholar ID
MARZIEH HASHEMZADEH
Scopus Author Id
56045472200

Email addresses

  • marzieh.khameneh@tecnico.ulisboa.pt (Professional)

Knowledge fields

  • Engineering and Technology - Environmental Engineering - Marine Engineering, Sea Vessels
  • Engineering and Technology - Mechanical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Portuguese Elementary (A2) Elementary (A2) Beginner (A1) Intermediate (B1)
Persian (Mother tongue)
Degree Classification
2018/12/14
Concluded
Naval Architecture and Marine Engineering (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
"Numerical and Experimental Study of Welded Ship Structural Components" (THESIS/DISSERTATION)
Pass with Distinction
2011/02/02
Concluded
Naval Architecture and Marine Engineering (Master)
Amirkabir University of Technology Department of Maritime Engineering, Iran
"Design and Finite Element Analysis of Welded Legs of Drilling Jack up Platform" (THESIS/DISSERTATION)
17.59
2008/08/01
Concluded
Naval Architecture and Marine Engineering (Bachelor)
Amirkabir University of Technology Department of Maritime Engineering, Iran
"Jack-up Platform Construction Methods" (THESIS/DISSERTATION)
15.82

Science

Category
Host institution
Employer
2020/11/01 - Current Postdoc (Research) Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
2019/01/01 - 2020/10/31 Researcher (Research) Universidade de Lisboa Instituto Superior Técnico, Portugal
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
2011/09/01 - 2014/04/01 Research Assistant (Research) Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal

Others

Category
Host institution
Employer
2014/04/01 - 2018/12/14 PhD student and Research Assistant Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
2011/01/20 - 2011/08/31 Structural engineer SADRA Iran Marine Industrial Company, Iran
2008/07/01 - 2011/01/20 Engineering Coordinator and Deputy Project Manager in Jack up Construction Project SAFF Ofshore industries Co., Iran

Grant

Designation Funders
2020/11/01 - Current Analysis of welded ship structures
uidb/00134/2
Post-doc Fellow
Ongoing
2019/09/01 - 2020/10/31 Welding improvment
CPAUD\5181801936
Researcher
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
Ongoing
2018/04/01 - 2019/08/31 Ship Lifecycle Software Solutions (SHIPLYS)
Researcher
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
Concluded
2014/04/01 - 2018/03/31 Doctoral Training Grant (DTG) to provide funding for 1 PhD studentship
SFRH/BD/97682/2013
PhD Student Fellow
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
Centro de Engenharia e Tecnologia Naval e Oceanica
Concluded
2014/06/01 - 2015/02/01 Materials Onboard – Steel Advancements and Integrated Composites (MOSAIC)
FP7-SST-2012-RTD-1
Other
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
Concluded
2011/09/01 - 2014/03/31 Welding simulation
CPAUD\5181801936
Research Fellow
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
Concluded

Publications

Book chapter
  1. Hashemzadeh, Marzieh; Garbatov, Yordan; Guedes Soares, Carlos. "Finite element welding simulation of construction assembly". London, United Kingdom: Taylor & Francis, 2021.
    Accepted
  2. Hashemzadeh, M; Garbatov, Yordan; Guedes Soares, Carlos. "Numerical stress-strain analysis of butt-welded plates during the welding process". In Developments in the Collision and Grounding of Ships and Offshore Structures, edited by Guedes Soares, Carlos. 2019.
    Published
  3. Chen, B.-Q.; Hashemzadeh, M.; Soares, C.G.. "Numerical analysis of the effects of weld parameters on distortions and residual stresses in butt welded steel plates". 309-320. 2013.
  4. Hashemzadeh, M.; Chen, B.-Q.; Soares, C.G.. "Comparison between different heat sources types in thin-plate welding simulation". 329-336. 2013.
Conference paper
  1. Chen, B.-Q.; Hashemzadeh, M.; Garbatov, Y.; Soares, C.G.. "Recent developments in experimental and numerical assessments of welding-induced residual stresses". 2018.
    10.1115/OMAE2018-77652
  2. Hashemzadeh, M.; Garbatov, Y.; Guedes Soares, C.. "Distortions and residual stress analysis of thin butt welded plates accounting for manufacturing imperfections". 2017.
    10.1201/9781315157368-72
  3. Hashemzadeh, M.; Garbatov, Y.; Guedes Soares, C.. "Reduction in welding induced residual stresses and distortions of butt welded plates subjected to heat treatments". 2016.
  4. Hashemzadeh, M.; Garbatov, Y.; Soares, C.G.. "Assessment of distortion and residual stresses in butt welded plates made of different steels". 2016.
  5. Hashemzadeh, M.; Garbatov, Y.; Guedes Soares, C.. "Analysis of butt-weld induced distortion accounting for the welding sequences and weld toe geometry". 2015.
  6. Hashemzadeh, M.; Garbatov, Y.; Guedes Soares, C.. "Numerical investigation of the thermal fields due to the welding sequences of butt-welds". 2015.
  7. Hashemzadeh, M.; Garbatov, Y.; Guedes Soares, C.. "Reduction in weld induced distortions of butt welded plates subjected to preventive measures". 2015.
  8. Hashemzadeh, M.; Chen, B.-Q.; Guedes Soares, C.. "Comparison between different heat sources types in thin-plate welding simulation". 2014.
  9. Chen, B.-Q.; Hashemzadeh, M.; Guedes Soares, C.. "Numerical analysis of the effects of weld parameters on distortions and residual stresses in butt welded steel plates". 2014.
Journal article
  1. "Hybrid-laser welding-induced distortions and residual stresses analysis of large-scale stiffener panel". Ocean Engineering 245 (2022): 110411-110411. http://dx.doi.org/10.1016/j.oceaneng.2021.110411.
    10.1016/j.oceaneng.2021.110411
  2. M. Hashemzadeh; Y. Garbatov; C. Guedes Soares. "Welding-induced residual stresses and distortions of butt-welded corroded and intact plates". Marine Structures 79 (2021): 103041-103041. https://doi.org/10.1016/j.marstruc.2021.103041.
    10.1016/j.marstruc.2021.103041
  3. M. Hashemzadeh; Y. Garbatov; C. Guedes Soares; A. O’Connor. "Friction stir welding induced residual stresses in thick steel plates from experimental and numerical analysis". Ships and Offshore Structures (2021): 1-9. https://doi.org/10.1080/17445302.2021.1893531.
    10.1080/17445302.2021.1893531
  4. Hashemzadeh, Marzieh; Garbatov, Yordan; Guedes Soares, Carlos; O’Connor, A. "Friction Stir Welding Induced Residual Stresses in Thick Steel Plates from Experimental and Numerical Analysis". journal of Ships and Offshore Structures (2021):
    Accepted
  5. Hashemzadeh, Marzieh; Garbatov, Yordan; Guedes Soares, Carlos. "Welding-induced residual stresses and distortions due to a butt-weld between corroded and intact plates". Journal of Marine Structures (2021):
    Under revision
  6. Marzieh Hashemzadeh; Bai-Qiao Chen; C. Guedes Soares. "Evaluation of multi-pass welding-induced residual stress using numerical and experimental approaches". Ships and Offshore Structures 13 8 (2018): 847-856. https://doi.org/10.1080/17445302.2018.1470453.
    10.1080/17445302.2018.1470453
  7. Hashemzadeh, M.; Garbatov, Y.; Guedes Soares, C.. "Analytically based equations for distortion and residual stress estimations of thin butt-welded plates". Engineering Structures 137 (2017): 115-124. http://www.scopus.com/inward/record.url?eid=2-s2.0-85011321009&partnerID=MN8TOARS.
    10.1016/j.engstruct.2017.01.041
  8. Chen, B.-Q.; Hashemzadeh, M.; Guedes Soares, C.. "Validation of numerical simulations with X-ray diffraction measurements of residual stress in butt-welded steel plates". Ships and Offshore Structures (2017): 1-10. http://www.scopus.com/inward/record.url?eid=2-s2.0-85028564438&partnerID=MN8TOARS.
    10.1080/17445302.2017.1368122
  9. Khameneh, Marzieh. "Numerical and experimental study on butt weld with dissimilar thickness of thin stainless steel plate". The International Journal of Advanced Manufacturing Technology (2015):
    https://doi.org/10.1007/s00170-014-6597-6
  10. Hashemzadeh, M.; Chen, B.Q.; Guedes Soares, C.. "Numerical and experimental study on butt weld with dissimilar thickness of thin stainless steel plate". International Journal of Advanced Manufacturing Technology 78 1-4 (2015): 319-330. http://www.scopus.com/inward/record.url?eid=2-s2.0-84925485750&partnerID=MN8TOARS.
    10.1007/s00170-014-6597-6
  11. Chen, B.Q.; Hashemzadeh, M.; Garbatov, Y.; Guedes Soares, C.. "Numerical and parametric modeling and analysis of weld-induced residual stresses". International Journal of Mechanics and Materials in Design 11 4 (2015): 439-453. http://www.scopus.com/inward/record.url?eid=2-s2.0-84945483450&partnerID=MN8TOARS.
    10.1007/s10999-014-9269-7
  12. Chen, B.-Q.; Hashemzadeh, M.; Guedes Soares, C.. "Numerical and experimental studies on temperature and distortion patterns in butt-welded plates". International Journal of Advanced Manufacturing Technology 72 5-8 (2014): 1121-1131. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903153111&partnerID=MN8TOARS.
    10.1007/s00170-014-5740-8

Oral presentation

Presentation title Event name
Host (Event location)
2019 Numerical Stress-Strain Analysis of Butt-Welded Plates during the Welding Process International confeereence of ICCGS 2019
Centro de Engenharia e Tecnologia Naval e Oceânica (Lisboa, Portugal)
2018 RECENT DEVELOPMENTS IN EXPERIMENTAL AND NUMERICAL ASSESSMENTS OF WELDING-INDUCED RESIDUAL STRESSES International confeereence of OMAE 2018
The ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering (Madrid, Spain)
2017 Distortions and residual stress analysis of thin butt welded plates accounting for manufacturing imperfections International confeereence of MARSTRUCT 2017
Centro de Engenharia e Tecnologia Naval e Oceânica (Lisbon, Portugal)
2017 Assessment of distortion and residual stresses in butt welded plates made of different steels International confeereence of IMAM 2017
Centro de Engenharia e Tecnologia Naval e Oceânica (Lisbon , Portugal)
2016 Reduction in welding induced residual stresses and distortions of butt welded plates subjected to heat treatments International confereence of MARTECH 2016
Centro de Engenharia e Tecnologia Naval e Oceânica (Lisbon, Portugal)
2015 Reduction in welding induced distortions of butt welded plates subjected to preventive measures International confeereence of MARSTRUCT 2015
Centro de Engenharia e Tecnologia Naval e Oceânica (Southampton, United Kingdom)
2014 Numerical investigation of the thermal fields due to the welding sequences of butt-welds International confereence of MARTECH 2014
Centro de Engenharia e Tecnologia Naval e Oceânica (Lisbon , Portugal)
2014 Analysis of butt-weld induced distortion accounting for the welding sequences and weld toe geometry MARTECH 2014
Centro de Engenharia e Tecnologia Naval e Oceânica (Lisbon, Portugal)
2013 Comparison between different heat sources types in thin-plate welding simulation International confereence of IMAM 2013
Centro de Engenharia e Tecnologia Naval e Oceânica (A Coruña, Spain)
2013 Numerical analysis of the effects of weld parameters on distortions and residual stresses in butt-welded steel plates International confereence of IMAM2013
Centro de Engenharia e Tecnologia Naval e Oceânica (A Coruña, Spain)

Supervision

Thesis Title
Role
Degree Subject (Type)
Institution / Organization
2013 - 2014 Ultimate strength assessment of ship hull under dynamic loading
Co-supervisor
Amirkabir University of Technology Department of Maritime Engineering, Iran

Ad Hoc journal article review

Journal title (ISSN) Publisher
2019/11/01 - 2022/01/10 Ocean Engineering (0029-8018) elsevier
2020/01/20 - 2020/02/20 Ships and Offshore Structures (1754-212X) Informa UK (Taylor & Francis)
2019/11/01 - 2019/12/01 Journal of Marine Science and Application (1993-5048) springer
2019/01/04 - 2019/03/01 Proceedings of the Institution of Mechanical Engineers Part M Journal of Engineering for the Maritime Environment (2041-3084) SAGE Publications

Consulting

Activity description Institution / Organization
2011 - 2014 Design experimental setup due to the welding Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2018 - 2018 Ship design (Curso de mestrado (conclusão do curso de especialização)) Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal
2010/01 - 2010/05 Teaching Assistant for Mechanics of Materials I (Bachelor) Amirkabir University of Technology, Iran

Mentoring / Tutoring

Topic Student name
2018 - 2019 Finite element modeling Mojtaba Ajdari
2012 - 2015 Thermomechanical analysis in FEM Mesut Tekgoz
2011 - 2012 Finite element modeling Fatemeh Nemati
2009 - 2009 Engineering Mathematics Fatemeh Nemati, Benyamin Yazdani
2008 - 2008 Thermodynamic Mandana Khadabakhshi, Parisa Ghandehari

Other jury / evaluation

Activity description Institution / Organization
2019 - Current Reviewer of OMAE international conference
2021/12/15 - 2022/01/15 Reviewer of MARTECH 2022 conference

Scientific expedition

Activity description Institution / Organization
2017/11/18 - 2017/11/26 Scientific visiting Saga Daigaku, Japan
2014/06/01 - 2014/07/31 scientific visit Universidade de Santiago de Compostela, Spain
2014/02/08 - 2014/02/17 scientific visit and testing residual stress of welded pales. AIMEN Centro Tecnológico, Spain

Award

2013 The third ranked candidate in the field of mechanical engineering in Portugal (2013) awarded by the FCT association for the doctoral program scholarship
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal

Other distinction

2011 First rank MSc Student in Offshore Engineering Field
2008 BSc Top-ranked student in Naval Architecture