???global.info.a_carregar???
Georgina Miranda is an Assistant Professor at the Department of Materials Engineering and Ceramics (DEMaC) at University of Aveiro (UA) and member of CICECO - Aveiro Institute of Materials. She earned her PhD in Mechanical Engineering in 2015, working on the "Development of aluminum-based composites by pressure-assisted sintering". After her PhD completion, she earned individual FCT funding on competitive calls, first an FCT post-doc (SFRH/BPD/112111/2015 - Development of Multi-Functional Structures by Multi-Material Selective Laser Melting/Sintering) and afterwards a CEEC-Individual-2017 contract (Multi-Functional Multi-Material Structures via additive manufacturing for biomedical applications). She is currently the Director of the Master in Materials Engineering, Vice-Director of the Bachelor in Materials Engineering and member of the Department Board. She is ISO (International Organization for Standardization) member, with active collaboration on the National Standardization Committee led by IPQ, particularly regarding ISO/ASTM 52900:2021 (Additive manufacturing - General principles - Fundamentals and vocabulary) standard harmonization to Portuguese language. At DEMaC/CICECO she started the “Laboratory of Materials Design and Fabrication”, where her main scientific activity is developed, on several areas, but highlighting the following: multi-material design and fabrication; laser approaches for sintering/melting/ablation; additive manufacturing, Selective Laser Melting; powder metallurgy; materials transition design through functionally graded materials (FGMs) and cellular structuring/topology optimization for tailored properties. She is/was Principal Investigator (PI) of three FCT funded projects on Additive Manufacturing: ADAPTPROSTHESIS - Development of smart designed adaptive prosthesis for Orthopaedic Applications (PTDC/EMS-TEC/5422/2014); SMARTCUT - Smart designed cutting tools by Multi-material Selective Laser Melting/Sintering (POCI-01-0145-FEDER-030353) and ADD2MECHBIO - Additive manufacturing meets mechanobiology: design and fabrication of osteogenic-stimulating implants (PTDC/EME-EME/1442/2020) - ongoing. She was also Co-PI of the project "Multifunctional polymer nanocomposite flexible films for electrocaloric cooling and energy storage (EXPL/CTM-CTM/0687/2021)". She is team member on 2 PRR projects (Agenda AM2R and Agenda ILLIANCE - both ongoing) and team member on 2 European Projects (ongoing). G. Miranda is author of 112 papers indexed on SCOPUS platform, that have gained increasing attention from the scientific community, having ca. 2740 citations, leading to an h-index of 28. This body of work led her to be included on the Top 2% authors worldwide lists disclosed by Elsevier in 2021 and 2022. With 12 years of experience teaching disciplines on bachelor and master courses on Materials, Mechanical, and Biomedical Engineering, she has been main supervisor of 6 PhD (4 of them concluded) and supervisor of 18 Eng. MSc students (15 concluded).
Read full resume ↓
Identification

Personal identification

Full name
Maria Georgina Macedo Miranda

Citation names

  • Miranda, G.

Author identifiers

Ciência ID
E41A-3E4F-B0B4
ORCID iD
0000-0003-0523-9670
Google Scholar ID
https://scholar.google.pt/citations?user=YKB4q_oAAAAJ&hl=pt-PT
Researcher Id
M-5857-2015
Scopus Author Id
25653626900

Websites

Knowledge fields

  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Materials Engineering
  • Engineering and Technology - Mechanical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
Spanish; Castilian Beginner (A1) Beginner (A1) Beginner (A1) Beginner (A1)
Education
Degree Classification
2015/04/24
Concluded
 Doutoramento em Engenharia Mecânica (PhD Mechanical Engineering) (Doutoramento)
Universidade do Minho Escola de Engenharia, Portugal
"Development of aluminum based composites by pressure-assisted sintering" (THESIS/DISSERTATION)
2009
Concluded
 Mestrado Integrado em Engenharia Mecânica (Integrated Master in Mechanical Engineering) (Mestrado integrado)
Universidade do Minho Escola de Engenharia, Portugal
"Analysis of the shape memory effect in gold alloys" (THESIS/DISSERTATION)
2008
Concluded
 Licenciatura em Ciências de Engenharia Mecânica (1ºCiclo) (Licenciatura)
Universidade do Minho Escola de Engenharia, Portugal
2005
Concluded
 Licenciatura em Ensino de Matemática (Licenciatura)
Universidade do Minho Escola de Ciências, Portugal
Affiliation

Science

Category
Host institution 		Employer
2020/09/01 - Current Researcher (Research) Universidade de Aveiro CICECO, Portugal
Universidade de Aveiro CICECO, Portugal
2019/01/01 - 2020/08/31 Contracted Researcher (Research) Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2016/01/01 - 2019/01/01 Postdoc (Research) Fundação para a Ciência e a Tecnologia, Portugal
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2014/10/01 - 2015/12/31 Researcher (Research) Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2010/09/01 - 2014/09/30 Researcher (Research) Fundação para a Ciência e a Tecnologia, Portugal
Universidade do Minho Centro de Tecnologias Mecânicas e de Materiais, Portugal
2007/06/15 - 2007/09/15 Research Trainee (Research) Universidade do Minho Centro de Tecnologias Mecânicas e de Materiais, Portugal
Universidade do Minho Centro de Tecnologias Mecânicas e de Materiais, Portugal

Teaching in Higher Education

Category
Host institution 		Employer
2020/09/01 - Current Assistant Professor (University Teacher) Universidade de Aveiro, Portugal
Universidade de Aveiro Departamento de Engenharia de Materiais e Cerâmica, Portugal
2018/09/15 - 2019/08/31 Invited Assistant Professor (University Teacher) Universidade do Minho, Portugal
Universidade do Minho Departamento de Engenharia Mecânica, Portugal
2016/09/15 - 2017/09/14 Invited Assistant Professor (University Teacher) Universidade do Minho, Portugal
2015/09/15 - 2016/09/14 Invited Assistant Professor (University Teacher) Universidade do Minho, Portugal
Universidade do Minho Departamento de Engenharia Mecânica, Portugal
2014/09/15 - 2015/09/14 Invited Assistant Professor (University Teacher) Universidade do Minho, Portugal
Universidade do Minho Departamento de Engenharia Mecânica, Portugal
2013/09/16 - 2014/07/31 Invited Assistant (Polytechnic Teacher) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
Instituto Politécnico do Porto Departamento de Engenharia Mecânica, Portugal
2013/02/25 - 2013/07/26 Invited Assistant (Polytechnic Teacher) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
Instituto Politécnico do Porto Departamento de Engenharia Mecânica, Portugal
2012/03/06 - 2012/09/30 Invited Assistant (Polytechnic Teacher) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
Instituto Politécnico do Porto Departamento de Engenharia Mecânica, Portugal
2011/09/28 - 2012/01/20 Invited Assistant (Polytechnic Teacher) Instituto Politécnico do Porto Instituto Superior de Engenharia do Porto, Portugal
Instituto Politécnico do Porto Departamento de Engenharia Mecânica, Portugal
Projects

Grant

Designation Funders
2016/01/01 - 2019/01/01 Development of Multi-Functional Structures by Multi-Material Selective Laser Melting/Sintering
SFRH/BPD/112111/2015
Post-doc Fellow
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2010/09/01 - 2014/09/30 Development of aluminum based composites by pressure-assisted sintering
SFRH/BD/65754/2009
PhD Student Fellow
Universidade do Minho Centro de Tecnologias Mecânicas e de Materiais, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2007/06/15 - 2007/09/15 Mechanical and Fatigue Properties of Functionally Graded Alloys Obtained by the Incremental Melting and Solidification Process
POCI/EME/59138/2004
Scientific Initiation Fellow
Universidade do Minho Centro de Tecnologias Mecânicas e de Materiais, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded

Contract

Designation Funders
2021/03/29 - Current Add2MechBio - Additive manufacturing meets mechanobiology – design and fabrication of osteogenic-stimulating implants
PTDC/EME-EME/1442/2020
Principal investigator
Universidade do Minho - Campus de Azurém, Portugal

Universidade de Aveiro, Portugal

International Iberian Nanotechnology Laboratory, Portugal

Aalto University Center for Entrepreneurship, Finland
Fundação para a Ciência e Tecnologia - FCT
Ongoing
2021/01/01 - 2025/12/31 CICECO ¿ Aveiro Institute of Materials
LA/P/0006/2020
Universidade de Aveiro, Portugal

Universidade de Aveiro CICECO, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2022/03/01 - 2023/07/16 Multifunctional polymer nanocomposite flexible films for electrocaloric cooling and energy storage
EXPL/CTM-CTM/0687/2021
Researcher
Universidade de Aveiro, Portugal
 Fundação para a Ciência e Tecnologia - FCT
Ongoing
2018/06/01 - 2022/05/31 SMARTCUT - Smart designed cutting tools by Multi-material Selective Laser Melting/Sintering (POCI-01-0145-FEDER-030353)
POCI-01-0145-FEDER-030353
Principal investigator
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2018 - 2022 Add.Additive - Add additive manufacturing to Portuguese industry
POCI-01-0247-FEDER-024533
Researcher
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
Ongoing
2018/06 - 2021 Cutinov - Desenvolvimento de Cutelaria esteticamente inovadora recorrendo a tecnologias avançadas
POCI-01-0247-FEDER-017828
Researcher
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
Ongoing
2017/06 - 2021 HAMaBICo _ Hybrid Additive Manufacturing for Bio Inspired Components
NORTE-01-0145-FEDER-000018
Researcher
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
Ongoing
2016/04/01 - 2019/09/30 ADAPTPROSTHESIS - Development of smart designed adaptive prosthesis for Orthopaedic Applications (PTDC/EMS-TEC/5422/2014)
PTDC/EMS-TEC/5422/2014
Principal investigator
Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
Outputs

Publications

Book chapter
  1. Miranda, G.; F. Bartolomeu. "Tecnologias de Fabrico Aditivo de Metais". In Impressão 3D – Tecnologias, Materiais e Aplicações. ENGEBOOK, 2023.
    Published
  2. Miranda, G.; F.Bartolomeu. "Fabrico Aditivo de Componentes Multimaterial". In Impressão 3D – Tecnologias, Materiais e Aplicações. Portugal: ENGEBOOK, 2023.
    Published
  3. Miranda, G.; F.Bartolomeu. "Fabrico Híbrido". In Impressão 3D – Tecnologias, Materiais e Aplicações. ENGEBOOK, 2023.
    Published
Conference abstract
  1. Guimarães, B.; Fernandes, C.M.; Figueiredo, D.; Silva, F. S.; Miranda, G.. "Additive manufacturing of a novel multi-material WC-Co/316 steel cutting tool". Paper presented in 1st International Conference on Engineering Manufacture, Porto, 2022.
    Published
  2. F. Bartolomeu; M. M. Costa; F. S. Silva; Miranda, G.. "NiTi alloy cellular structures by Selective Laser Melting targeting orthopedic implants - Design, fabrication and mechanical characterization". Paper presented in 8th International Conference on Mechanics of Biomaterials and Tissues, 15-19 December 2019, Waikoloa - Hawaii, USA., Waikoloa - Hawaii, 2019.
  3. M. M. Costa; A. Campos; O. Carvalho; F. Bartolomeu; F. S. Silva; Miranda, G.. "Ti-NiTi Multi material Parts Fabrication By Laser Machining And Powder Metallurgy". Paper presented in 8th International Conference on Mechanics of Biomaterials and Tissues, 15-19 December 2019, Waikoloa - Hawaii, USA., Waikoloa - Hawaii, 2019.
  4. F. Melo-Fonseca; Ine^s Mendes Pinto; Michael Gasik; F. S. Silva; Miranda, G.. "Designing osteogenic-stimulating titanium-based implants". Paper presented in 8th International Conference on Mechanics of Biomaterials and Tissues, 15-19 December 2019, Waikoloa - Hawaii, USA., Waikoloa - Hawaii, 2019.
  5. Bartolomeu, F.; Almeida, S.; Costa, M. M.; Pinto, E.; Alves, N.; Carvalho, O.; Silva, F.S.; Miranda, G.. "Mechanical and tribocorrosion behavior of Ti6Al4V cellular structures impregnated with biomedical PEEK". Paper presented in Materiais 2017, Aveiro, 2017.
  6. Carvalho, O.; Buciumeanu, M.; Mhurat, A.; Madeira, S.; Silva, F.S.; Miranda, G.. "Reinforcement Sputtering Functionalization and influence on the interface reaction of 410L- SiCp stainless steel composites". Paper presented in Materiais 2017, Aveiro, 2017.
  7. Madeira, S.; Pinto, A.M.P.; Rodrigues, L.C.; Carvalho, O.; Miranda, G.; Reis, R.L.; Caramês, J.M.M.; Silva, F.S.. "The influence of pressure on the sintering of Ti6Al4V-ZrO2 materials for biomedical applications". Paper presented in Materiais 2017, Guimarães, 2017.
  8. Faria, D.; Pereira, R.S.F.; Miranda, G.; Mesquita-Guimarães, J.; Silva, F.S.. "Mechanical properties of layered zirconia to zirconia-hydroxyapatite or zirconia-ß-TCP composites for biomedical applications". Paper presented in Materiais 2017, Guimarães, 2017.
  9. Dantas, T.A.; Abreu, C.S.; Costa, M. M.; Miranda, G.; Silva, F.S.; Dourado, N.; Gomes, J.R.. "Tribological characterization of Ti6Al4V+HAp and Ti6Al4V+ß-TCP biocomposites to assess the primary stability of implants". Paper presented in Materiais 2017, Guimarães, 2017.
  10. Brito da Cruz, Mariana; Peñarrieta- Juanito G; Marques, Joana; Miranda, G.; Costa, Mafalda; Souza, Julio; Silva Marques, Duarte Nuno; et al. "Implant Surfaces Manufactured by Multi-Material Laser Sintering ¿ In vitro Study". Paper presented in CED/NOF Oral Health Research Congress, Setembro, 2017.
    Published
  11. Mendonça, Carlota; Brito da Cruz, Mariana; Peñarrieta- Juanito, G; Marques, Joana; Costa, Mafalda; Miranda, G.; Souza, Julio; et al. "Osteoblast Behavior on PEEK Surfaces with different bioactives ¿ Pilot Study". Paper presented in CED/NOF Oral Health Research Congress, Viena, 2017.
    Published
  12. Mendonça, C.D.; Cruz, M.B.; Marques, J.; Juanito, G.M.B.; Costa, M.M.; Miranda, G.; Souza, J.C.M.; et al. "Osteoblasts Behavior on PEEK Surfaces with Different Bioactives ¿ Pilot Study". Paper presented in Proceedings on the CED-IADR/NOF, Vienna, 2017.
  13. Miranda, G.; Bartolomeu, F.; Carvalho, O.; Madeira, S.; Silva, F.S.; Henriques, B.. "Hydroxyapatite/Ti6Al4V composites by hot pressing for biomedical applications". Paper presented in XV Portuguese conference on fracture (PCF 2016), Lisboa, 2016.
  14. Madeira, S.; Miranda, G.; Carvalho, O.; Silva, F.S.. "Fracture Behavior of Ti6Al4V-ZrO2 Composites for Dental Implants". Paper presented in XV Portuguese conference on fracture (PCF 2016), Lisboa, 2016.
  15. Miranda, G.; Buciumeanu, M.; Carvalho, O.; Madeira, S.; Soares, D.; Silva, F.S.. "A study on wear behavior of metal-reinforced, ceramic-reinforced and hybrid aluminum composites". Paper presented in Materiais 2015, Porto, 2015.
  16. Madeira, S.; Carvalho, O.; Carneiro, V.H.; Soares, D.; Silva, F.S.; Miranda, G.. "The influence of reinforcement on damping behaviour AlSi-SiC composites". Paper presented in Materiais 2015, Porto, 2015.
  17. Miranda, G.; Carvalho, O.; Soares, D.; Silva, F.S.. "Hybrid particle reinforced aluminum composites – metallic and ceramic reinforcements influence on mechanical properties". Paper presented in MechComp 2014 – First International Conference on Mechanics of Composites - Stony Brook University, Long Island, 2014.
  18. Carvalho, O.; Miranda, G.; Soares, D.; Silva, F.S.. "Dispersion of carbon nanotubes by ultrasonification and its effects on mechanical properties". Paper presented in MechComp 2014 – First International Conference on Mechanics of Composites, Stony Brook University, Long Island, 2014.
  19. Miranda, G.; Carvalho, O.; Silva, F.S.; Soares, D.. "NiTi short fibre-reinforced aluminum composites interface influence in load transfer ability and mechanical properties". Paper presented in XIV Portuguese Conference on Fracture (PCF2014), Régua, 2014.
  20. Carvalho, O.; Miranda, G.; Soares, D.; Silva, F.S.. "Dispersion of carbon nanotubes by powder metallurgy and its effects on mechanical properties of carbon nanotube based aluminium composites". Paper presented in XIV Portuguese Conference on Fracture (PCF2014), Régua, 2014.
  21. Carvalho, O.; Miranda, G.; Soares, D.; Silva, F.S.. "CNT-reinforced aluminium composites: processing and mechanical properties". Paper presented in Materiais 2013, Coimbra, 2013.
Conference paper
  1. Guimarães, B.; Fernandes, C. M.; Figueiredo, D.; Silva, F. S.; Miranda, G.. "Chip Morphology Evaluation On Turning Of 316L Stainless Steel Using Laser Surface Textured WC-Co Cutting Tools". 2023.
    10.59499/ep235765436
  2. Miranda, G.; Basílio, L.; Guimarães, B.; Carvalho, O.; Fernandes, C. M.; Figueiredo, D.; Silva, F. S.. "Fabrication Of Micro-Scale Laser Textured Surfaces On WC-Co Green Compacts". Paper presented in Euro PM2023, 2023.
    10.59499/ep235765405
  3. Costa, M. M.; Bartolomeu, F.; Guimarães, B.; Alves, N.; Miranda, G.; Silva, F.S.. "Mechanical and Tribological Characterization of NiTi Cellular Structures made by Selective Laser Melting, aiming Orthopedic Implants". Paper presented in DCE21 - Symposium on Mechanical Engineering: Book of Abstracts and Invited Lectures, Porto, 2021.
  4. Guimarães, B.; Fernandes, C.M.; Figueiredo, D.; Silva, F.S.; Miranda, G.. "The effect of surface texturing on the temperature distribution on WC-Co cutting tools". 2020.
  5. Costa, M. M.; Lima, R.; Melo-Fonseca, F.; Bartolomeu, F.; Miranda, A.; Silva, N.A.; Silva, F.S.; Miranda, G.. "Ti6Al4V-Bioactive Cellular Structures: A Multi-Material Approach to Enhance Cellular Response". Paper presented in CNB2019 - 8th Portuguese Congress on Biomechanics, Unhais da Serra, 2019.
  6. Miranda, G.; Faria, S.; Bartolomeu, F.; Pinto, E.; Alves, N.; Silva, F.S.. "Predicting the influence of processing parameters on the thickness of Ti6Al4V thin-walled plates made by SLM". Paper presented in 8th Portuguese Congress on Biomechanics, Unhais da Serra, 2019.
  7. Carvalho, O.; Rodrigues, S.; Madeira, S.; Henriques, B.; Miranda, G.; Silva, F.S.. "Sintering of ceramics for dental implant applications". Paper presented in PowderMet2017, 2017.
  8. Miranda, G.; Bartolomeu, F.; Costa, M. M.; Carvalho, O.; Gasik, M.; Silva, F.S.. "Ti6Al4V thin-walled structures by selective laser melting". Paper presented in PowderMet2017, Las Vegas, 2017.
  9. Costa, M. M.; Bartolomeu, F.; Pinto, E.; Alves, N.; Carvalho, O.; Silva, F.S.; Miranda, G.. "Bioactives impregnation on Ti6Al4V cellular structures produced by Selective Laser Melting". Paper presented in PowderMet2017, Las Vegas, 2017.
  10. Bartolomeu, F.; Costa, M. M.; Pinto, E.; Alves, N.; Carvalho, O.; Silva, F.S.; Miranda, G.. "Ti6Al4V micro containers produced by Selective Laser Melting for implant drug delivery". Paper presented in PowderMet2017, 2017.
  11. Miranda, G.; Faria, D.; Costa, M. M.; Bartolomeu, F.; Gasik, M.; Silva, F.S.. "Enhancing bioactivity of Ti6Al4V hip implants - strategies from composites to textured surfaces". Paper presented in CNB2017 - 7º Congresso Nacional de Biomecânica, Guimarães, 2017.
  12. Costa, M. M.; Carvalho, O.; Silva, F.S.; Miranda, G.. "Bioactive composites for dental implants using hot pressing". Paper presented in CNB2017 - 7º Congresso Nacional de Biomecânica, Guimarães, 2017.
  13. Bartolomeu, F.; Pinto, E.; Alves, N.; Silva, F.S.; Miranda, G.. "Characterization of Ti6Al4V cellular structures for biomedical applications produced by selective laser melting". Paper presented in CNB2017 - 7º Congresso Nacional de Biomecânica, Guimarães, 2017.
  14. Faria, D.; Carvalho, O.; Silva, F.S.; Miranda, G.. "Laser texturing of Ti6Al4V and bioactivity functionalization using laser sintering". Paper presented in CNB2017 - 7º Congresso Nacional de Biomecânica, Guimarães, 2017.
  15. Carvalho, O.; Madeira, S.; Gomes, J.; Silva, F.S.; Miranda, G.. "Design, production, and characterization of laser sintered zirconia doped hydroxyapatite structures for dental application". Paper presented in PowderMet2016, 2016.
  16. Miranda, G.; Bartolomeu, F.; Pinto, E.; Carvalho, O.; Madeira, S.; Alves, N.; Silva, F.S.. "Characterization of Ti6Al4V cellular structures for biomedical applications produced by selective laser sintering/melting". Paper presented in PowderMet2016, Boston, 2016.
  17. Henriques, B.; Miranda, G.; Gasik, M.; Nascimento, R.M.; Souza, J.C.M.; Silva, F.S.. "Impact of a functionally graded configuration on the thermal residual stresses in dental restorations". Paper presented in MM&FGM 2014 - 13th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, São Paulo, 2014.
  18. Henriques, B.; Nascimento, R.M.; Miranda, G.; Silva, F.; Souza, J.C.M.. "Thermal residual stresses in functionally graded dental restorations". Paper presented in Biodental 2014 - 3rd International Conference on Biodental Engineering, 2014.
  19. Henriques, B.; Miranda, G.; Gasik, M.; Souza, J.C.M.; Martinelli, E.; Silva, F.S.; Nascimento, R.M.. "Finite element analyses of functionally graded dental restorations: impact on thermal and mechanical stresses". Paper presented in 5th International Conference on Mechanics of Biomaterials and Tissues, Sitges, 2013.
  20. Henriques, B.; Miranda, G.; Gasik, M.; Souza, J.C.M.; Martinelli, E.; Silva, F.S.; Nascimento, R.M.. "Functionally graded materials applied to dental restorative systems - a bioinspired approach". Paper presented in 22nd International Congress of Mechanical Engineering (COBEM 2013), November 3-7, 2013, Ribeirão Preto, SP, Brasil., Ribeirão Preto, 2013.
  21. Carvalho, O.; Miranda, G.; Soares, D.; Silva, F.S.. "Processing and mechanical evaluation of aluminium composites reinforced with carbon nanotubes". Paper presented in 4th International Conference on Integrity, Reliability and Failure, Funchal, 2013.
  22. Carvalho, O.; Miranda, G.; Soares, D.; Silva, F.S.. "Processing and mechanical evaluation of aluminium composites reinforced with carbon nanotubes". Paper presented in PowderMet 2012, 2012.
  23. Mazare, L.; Georgina, M.; Soares, D.; Silva, F.S.. "The influence of speed rate on microstructure of functionally graded components obtained by the incremental melting and solidification process". Paper presented in Advances in Heterogeneous Material Mechanics 2008 - Proceedings of the 2nd International Conference on Heterogeneous Material Mechanics, ICHMM 2008, 2008.
  24. Mazare, L.; Miranda, G.; Soares, D.; Silva, F.S.. "Mechanical Characterization of Functionally Graded Cu-Ag Alloys". Paper presented in 11th Portuguese Conference on Fracture, Lisboa, 2008.
Conference poster
  1. COONDOO, INDRANI; Bdikin, Igor; Vahideh Bayzi Esfahani; Miranda, G.. Corresponding author: COONDOO, INDRANI. "Local scale characterization of BCT-BZT based multiferroic composites". Paper presented in CICECO-Jornadas 2022, 2022.
  2. Miranda, G.; M. M. Costa; F. Bartolomeu; F. S. Silva. "Assessing the influence of laser parameters on the fabrication of thin-walled Ti6Al4V tubes manufactured by selective laser melting". Paper presented in 8th International Conference on Mechanics of Biomaterials and Tissues, 15-19 December 2019, Waikoloa - Hawaii, USA., 2019.
  3. H. Pereira; O. Carvalho; Miranda, G.; F. S. Silva. "Texturing and remelting Mg surfaces using Nd:YAG laser". Paper presented in 8th International Conference on Mechanics of Biomaterials and Tissues, 15-19 December 2019, Waikoloa - Hawaii, USA., 2019.
  4. F. Bartolomeu; M. M. Costa; F. S. Silva; Miranda, G.. "Selective Laser Melting of Ti6Al4V cellular structures targeting orthopedic implants: a combination of morphological, physical and mechanical properties". Paper presented in 8th International Conference on Mechanics of Biomaterials and Tissues, 15-19 December 2019, Waikoloa - Hawaii, USA., 2019.
  5. F. Bartolomeu; F. S. Silva; Miranda, G.. "Smart and multi-functional hip implants for life". Paper presented in Ciência 2019 - Science and Technology Summit (FCT annual meeting of Portuguese researchers), Lisboa, Portugal, 2019.
  6. F. Melo-Fonseca; Ine^s Mendes Pinto; Michael Gasik; F. S. Silva; Miranda, G.. "Improved implant-host bone interaction by stimulating physiological MSC-osteogenic differentiation". Paper presented in Ciência 2019 - Science and Technology Summit (FCT annual meeting of Portuguese researchers), Lisboa, Portugal, 2019.
  7. Melo-Fonseca, Francisca; Mendes Pinto, Inês; Gasik, Michael; Silva, F.S.; Miranda, G.. "Understanding mechanobiology – Linking the mechanical stimulation to cellular response". Paper presented in 8th Portuguese Congress on Biomechanics, 2019.
  8. Bartolomeu, F.; Fonseca, J.; Silva, F.S.; Miranda, G.. "Predictive tools for the elastic modulus of Ti6Al4V structures produced by Selective Laser Melting targeting orthopedic implants". Paper presented in 8th Portuguese Congress on Biomechanics, 2019.
  9. Fernandes, B; Brito da Cruz, Mariana; Peñarrieta-Juanito, G; Silva, Filipe; Mata, A.; Costa, M; Souza, J; et al. "Biological responses of Fibroblasts and Osteoblasts on modifed bioactive titanium implant surfaces". Paper presented in 27th EAO Annual Scientific Meeting, 2018.
    10.1111/clr.76_13358
  10. Brito da Cruz, Mariana; Marques, Joana; Peñarrieta- Juanito, G; Silva, Filipe; Mata, António; Costa, M; Souza, Julio; et al. "Human Osteoblast and Fibroblast behavior on modified Zirconia implant surface". Paper presented in 27th EAO Annual Scientific Meeting, 2018.
  11. Bartolomeu, F.; Silva, N.A.; Almeida, S.; Lima, R.; Costa, M.M.; Miranda, A.; Carvalho, O.; et al. "Ti6Al4V cellular Structures impregnated with Bioactive glass: Methodology and In Vitro Bioactivity". Paper presented in 28th Annual Conference of European Society for Biomaterials (ESB 2017), 2017.
  12. Costa, M. M.; Silva, N.A.; Almeida, S.; Lima, R.; Bartolomeu, F.; Miranda, A.; Carvalho, O.; et al. "ßTCP-impregnated Ti6Al4V cellular structures: Methodology and In Vitro Bioactivity". Paper presented in 28th Annual Conference of European Society for Biomaterials (ESB 2017), 2017.
  13. Bartolomeu, F.; Silva, N.A.; Almeida, S.; Lima, Rui; Costa, M.M.; Miranda, A.; Carvalho, O.; et al. "Ti6Al4V cellular structures impregnated with bioactive glass for biomedical applications: methodology and in vitro study.". Paper presented in XXVIII European Conference on Biomaterials, 2017.
  14. Miranda, G.; Bartolomeu, F.; Carvalho, O.; Pinto, E.; Alves, N.; Gasik, M.; Silva, F.S.. "Overview on the production of Ti6Al4V thin-walled structures by selective laser melting for hip implants design". Paper presented in CNB2017 - 7º Congresso Nacional de Biomecânica, 2017.
  15. Brito da Cruz, Mariana; Penãrrieta-Juanito, G; Marques, Joana; Miranda, G.; Costa, M.; Souza, J.; Silva Marques, Duarte Nuno; et al. "Implant Surface manufactured by multimaterial laser sintering ¿ In vitro study". Paper presented in CED-IADR/NOF Oral Health Research Congress 2017, 2017.
  16. Ferreira, P.; Henriques, B.; Silva, F.S.; Miranda, G.; Buciumeanu, M.; Cabral, A.; Fredel, M.. "Mechanical and metallurgical characterization of hot pressed diamond reinforced copper-nickel alloys". Paper presented in Materiais 2015, 2015.
  17. Carvalho, O.; Miranda, G.; Soares, D.; Silva, F.S.. "CNT agglomerates size and distribution influence on aluminum composites strength". Paper presented in 4th International Conference on Integrity, Reliability and Failure, 2013.
  18. Henriques, B.; Miranda, G.; Gasik, M.; Souza, J.C.M.; Soares, D.; Silva, F.S.. "Thermal and mechanical FEM analysis of novel functionally graded dental restorations". Paper presented in Materiais 2013, 2013.
  19. Miranda, G.; Carvalho, O.; Soares, D.; Silva, F.S.. "Sintering time: influence on interface properties of NiTi fiber-reinforced aluminum composites". Paper presented in Materiais 2013, 2013.
Journal article
  1. Guimarães, B.; Fernandes, C.M.; Figueiredo, D.; Carvalho, O.; Miranda, G.; Silva, F.S.. "Multi-material laser powder bed fusion of embedded thermocouples in WC-Co cutting tools". Journal of Manufacturing Processes 118 (2024): 163-172. http://dx.doi.org/10.1016/j.jmapro.2024.03.025.
    10.1016/j.jmapro.2024.03.025
  2. Melo-Fonseca, Francisca; Gasik, Michael; Cruz, Andrea; Moreira, Daniel; S. Silva, Filipe; Miranda, Georgina; Mendes Pinto, Inês. "Engineering a Hybrid Ti6Al4V-Based System for Responsive and Consistent Osteogenesis". ACS Omega 9 8 (2024): 8985-8994. http://dx.doi.org/10.1021/acsomega.3c07232.
    10.1021/acsomega.3c07232
  3. Pereira, Helena; Carvalho, Oscar; Bdikin, Igor; Silva, Filipe Samuel; Miranda, Georgina. "Hot-pressed calcium phosphates as a potential bone substitute: structural and mechanical characterization". The International Journal of Advanced Manufacturing Technology 130 11-12 (2024): 5619-5626. http://dx.doi.org/10.1007/s00170-024-13038-4.
    10.1007/s00170-024-13038-4
  4. Dias, Juliana Marques; da Silva, Filipe Samuel Correia Pereira; Gasik, Michael; Miranda, Maria Georgina Macedo; Bartolomeu, Flávio Jorge Fernandes. "Unveiling additively manufactured cellular structures in hip implants: a comprehensive review". The International Journal of Advanced Manufacturing Technology 130 9-10 (2023): 4073-4122. http://dx.doi.org/10.1007/s00170-023-12769-0.
    10.1007/s00170-023-12769-0
  5. Dias, Juliana Marques; da Silva, Filipe Samuel Correia Pereira; Gasik, Michael; Miranda, Maria Georgina Macedo; Bartolomeu, Flávio Jorge Fernandes. "Unveiling additively manufactured cellular structures in hip implants: a comprehensive review". The International Journal of Advanced Manufacturing Technology 130 9-10 (2023): 4073-4122. http://dx.doi.org/10.1007/s00170-023-12769-0.
    10.1007/s00170-023-12769-0
  6. Oliveira, D. F.; Vieira, J. S.; Duarte, I.; Vincze, G.; Oliveira, J. M.; Miranda, G.. "18Ni300 Maraging Steel Lattice Structures Fabricated via Laser Powder Bed Fusion—Mechanical Behavior and Gas Permeability". Metals 13 12 (2023): 1982. http://dx.doi.org/10.3390/met13121982.
    10.3390/met13121982
  7. Coondoo, Indrani; Alikin, Denis; Abramov, Alexander; Figueiras, Fábio G.; Shur, Vladimir Y.; Miranda, Georgina. "Exploring the effect of low concentration of stannum in lead-free BCT-BZT piezoelectric compositions for energy related applications". Journal of Alloys and Compounds 960 (2023): 170562. http://dx.doi.org/10.1016/j.jallcom.2023.170562.
    10.1016/j.jallcom.2023.170562
  8. Ferreira, Daniel F. S.; Miranda, G.; Oliveira, Filipe J.; Oliveira, José M.. "Nano-TiC-reinforced 18Ni300 steel manufactured by Powder Bed Fusion-Laser Beam with improved wear resistance for mould inserts". Journal of Materials Research 39 1 (2023): 63-76. http://dx.doi.org/10.1557/s43578-023-01161-z.
    10.1557/s43578-023-01161-z
  9. Ferreira, Daniel F. S.; Miranda, G.; Oliveira, Filipe J.; Oliveira, José M.. "Nano-TiC-reinforced 18Ni300 steel manufactured by Powder Bed Fusion-Laser Beam with improved wear resistance for mould inserts". Journal of Materials Research 39 1 (2023): 63-76. http://dx.doi.org/10.1557/s43578-023-01161-z.
    10.1557/s43578-023-01161-z
  10. Basílio, Liudmila; Guimarães, Bruno; Carvalho, Óscar; Fernandes, Cristina; Figueiredo, Daniel; Silva, Filipe; Miranda, Georgina. "WC–Co/316L stainless steel bonding enhancement by laser surface texturing and pressure-assisted sintering". The International Journal of Advanced Manufacturing Technology 128 9-10 (2023): 4189-4206. http://dx.doi.org/10.1007/s00170-023-12174-7.
    10.1007/s00170-023-12174-7
  11. Melo-Fonseca, F.; Carvalho, O.; Gasik, M.; Miranda, G.; Silva, F. S.. "Mechanical stimulation devices for mechanobiology studies: a market, literature, and patents review". Bio-Design and Manufacturing 6 3 (2023): 340-371. http://dx.doi.org/10.1007/s42242-023-00232-8.
    10.1007/s42242-023-00232-8
  12. Guimarães, B.; Guedes, A.; Fernandes, C.M.; Figueiredo, D.; Bartolomeu, F.; Miranda, G.; Silva, F.S.. "WC-Co/316L stainless steel joining by laser powder bed fusion for multi-material cutting tools manufacturing". International Journal of Refractory Metals and Hard Materials 112 (2023): 106140. http://dx.doi.org/10.1016/j.ijrmhm.2023.106140.
    Published • 10.1016/j.ijrmhm.2023.106140
  13. Guimarães, Bruno; Rosas, José; Fernandes, Cristina M.; Figueiredo, Daniel; Lopes, Hernâni; Paiva, Olga C.; Silva, Filipe S.; Miranda, Georgina. "Real-Time Cutting Temperature Measurement in Turning of AISI 1045 Steel through an Embedded Thermocouple—A Comparative Study with Infrared Thermography". Journal of Manufacturing and Materials Processing 7 1 (2023): 50. http://dx.doi.org/10.3390/jmmp7010050.
    Published • 10.3390/jmmp7010050
  14. Marques, A.; Guimarães, B.; Bartolomeu, F.; Miranda, G.; Silva, F.S.; Carvalho, O.. "Multi-material Inconel 718 – Aluminium parts targeting aerospace applications: A suitable combination of low-weight and thermal properties". Optics & Laser Technology 158 (2023): 108913. http://dx.doi.org/10.1016/j.optlastec.2022.108913.
    Published • 10.1016/j.optlastec.2022.108913
  15. Dias, J. M.; Gasik, Michael; Silva, F.S.; Miranda, G.; Flávio Bartolomeu. Corresponding author: Dias, J. M.. "Medical additive manufacturing of architectured hip implants a state of the art review,". The Journal of Arthroplasty (2023):
    Under revision
  16. Melo-Fonseca, Francisca; Guimarães, Bruno; Gasik, Michael; Silva, Filipe S.; Miranda, Georgina. "Experimental analysis and predictive modelling of Ti6Al4V laser surface texturing for biomedical applications". Surfaces and Interfaces 35 (2022): 102466. http://dx.doi.org/10.1016/j.surfin.2022.102466.
    Published • 10.1016/j.surfin.2022.102466
  17. Ferreira, Daniel F. S.; Miranda, G.; Oliveira, Filipe J.; Oliveira, José M.. "Conventionally and SLM-manufactured 18Ni300 steel: mechanical and tribological behaviour in dry sliding against PP40 composite". The International Journal of Advanced Manufacturing Technology 122 3-4 (2022): 1245-1258. http://dx.doi.org/10.1007/s00170-022-09972-w.
    Published • 10.1007/s00170-022-09972-w
  18. Miranda, Georgina; Faria, Susana; Bartolomeu, Flávio; Pinto, Elodie; Alves, Nuno; Silva, Filipe Samuel. "The Influence of Laser Power and Scan Speed on the Dimensional Accuracy of Ti6Al4V Thin-Walled Parts Manufactured by Selective Laser Melting". Metals 12 7 (2022): 1226. http://dx.doi.org/10.3390/met12071226.
    Published • 10.3390/met12071226
  19. Costa, M.M.; Miranda, A.; Bartolomeu, F.; Carvalho, O.; Matos, S.; Miranda, G.; Silva, F.S.. "NiTi laser textured implants with improved in vivo osseointegration: An experimental study in rats". Journal of Materials Science & Technology 114 (2022): 120-130. http://dx.doi.org/10.1016/j.jmst.2021.11.014.
    10.1016/j.jmst.2021.11.014
  20. Costa, M.M.; Lima, R.; Alves, N.; Silva, N.A.; Gasik, M.; Silva, F.S.; Bartolomeu, F.; Miranda, G.. "Multi-material cellular structured orthopedic implants design: In vitro and bio-tribological performance". Journal of the Mechanical Behavior of Biomedical Materials 131 (2022): 105246. http://dx.doi.org/10.1016/j.jmbbm.2022.105246.
    Published • 10.1016/j.jmbbm.2022.105246
  21. Rosas, José; Lopes, Hernani; Guimarães, Bruno; Piloto, Paulo A. G.; Miranda, Georgina; Silva, Filipe S.; Paiva, Olga C.. "Influence of Micro-Textures on Cutting Insert Heat Dissipation". Applied Sciences 12 13 (2022): 6583. http://dx.doi.org/10.3390/app12136583.
    Published • 10.3390/app12136583
  22. Bartolomeu, Flávio; Gasik, Michael; Silva, Filipe Samuel; Miranda, Georgina. "Mechanical Properties of Ti6Al4V Fabricated by Laser Powder Bed Fusion: A Review Focused on the Processing and Microstructural Parameters Influence on the Final Properties". Metals 12 6 (2022): 986. http://dx.doi.org/10.3390/met12060986.
    Published • 10.3390/met12060986
  23. Pereira Guimarães, Bruno Miguel; da Silva Fernandes, Cristina Maria; Amaral de Figueiredo, Daniel; Correia Pereira da Silva, Filipe Samuel; Macedo Miranda, Maria Georgina. "Cutting temperature measurement and prediction in machining processes: comprehensive review and future perspectives". The International Journal of Advanced Manufacturing Technology 120 5-6 (2022): 2849-2878. http://dx.doi.org/10.1007/s00170-022-08957-z.
    Published • 10.1007/s00170-022-08957-z
  24. Guimarães, B.; Silva, J.; Fernandes, C.M.; Figueiredo, D.; Carvalho, O.; Miranda, G.; Silva, F.S.. "Understanding drop spreading behaviour on WC-10wt%Co cutting tools – an experimental and numerical study". Colloids and Surfaces A: Physicochemical and Engineering Aspects 637 (2022): 128268. http://dx.doi.org/10.1016/j.colsurfa.2022.128268.
    10.1016/j.colsurfa.2022.128268
  25. Costa, Mafalda M.; Miranda, Alice; Bartolomeu, Flávio; Carvalho, Óscar; Matos, Sérgio; Silva, Filipe Samuel; Miranda, Georgina. "Osseointegration Assessment of Multi-Material Ti6Al4V-ß¿TCP Implants: An Experimental Study in Rats". Advanced Materials Technologies (2022): 2101117. http://dx.doi.org/10.1002/admt.202101117.
    10.1002/admt.202101117
  26. Ferreira, Daniel F.S.; Vieira, João S.; Rodrigues, S.P.; Miranda, G.; Oliveira, Filipe J.; Oliveira, José M.. "Dry sliding wear and mechanical behaviour of selective laser melting processed 18Ni300 and H13 steels for moulds". Wear 488-489 (2022): 204179. http://dx.doi.org/10.1016/j.wear.2021.204179.
    10.1016/j.wear.2021.204179
  27. Lagarinhos, J N; Santos, S; Miranda, G; Afonso, D; Torcato, R; Santos, C; Oliveira, J M. "The influence of surface finishing on laser heat treatments of a tool steel". Procedia CIRP 108 (2022): 839-844. http://dx.doi.org/10.1016/j.procir.2022.03.129.
    Published • 10.1016/j.procir.2022.03.129
  28. Pereira, H.; Moura, C.G.; Miranda, G.; Silva, F.S.. "Influence of liquid media and laser energy on the production of MgO nanoparticles by laser ablation". Optics & Laser Technology 142 (2021): 107181. http://dx.doi.org/10.1016/j.optlastec.2021.107181.
    10.1016/j.optlastec.2021.107181
  29. Ferreira, Daniel F.S.; Miranda, G.; Oliveira, Filipe J.; Oliveira, José M.. "Predictive models for an optimized fabrication of 18Ni300 maraging steel for moulding and tooling by Selective Laser Melting". Journal of Manufacturing Processes 70 (2021): 46-54. http://dx.doi.org/10.1016/j.jmapro.2021.07.066.
    10.1016/j.jmapro.2021.07.066
  30. Melo-Fonseca, F.; Gasik, M.; Madeira, S.; Silva, F.S.; Miranda, G.. "Surface characterization of titanium-based substrates for orthopaedic applications". Materials Characterization 177 (2021): 111161. http://dx.doi.org/10.1016/j.matchar.2021.111161.
    10.1016/j.matchar.2021.111161
  31. Costa, M.M.; Bartolomeu, F.; Palmeiro, J.; Guimarães, B.; Alves, N.; Miranda, G.; Silva, F.S.. "Multi-material NiTi-PEEK hybrid cellular structures by Selective Laser Melting and Hot Pressing: Tribological characterization". Tribology International 156 (2021): 106830. http://dx.doi.org/10.1016/j.triboint.2020.106830.
    10.1016/j.triboint.2020.106830
  32. Bartolomeu, F.; Costa, M.M.; Alves, N.; Miranda, G.; Silva, F.S.. "Selective Laser Melting of Ti6Al4V sub-millimetric cellular structures: Prediction of dimensional deviations and mechanical performance". Journal of the Mechanical Behavior of Biomedical Materials 113 (2021): 104123. http://dx.doi.org/10.1016/j.jmbbm.2020.104123.
    10.1016/j.jmbbm.2020.104123
  33. Bartolomeu, F.; Costa, M.M.; Alves, N.; Miranda, G.; Silva, F.S.. "Additive manufacturing of NiTi-Ti6Al4V multi-material cellular structures targeting orthopedic implants". Optics and Lasers in Engineering 134 (2020): 106208. http://dx.doi.org/10.1016/j.optlaseng.2020.106208.
    10.1016/j.optlaseng.2020.106208
  34. Guimarães, B.; Fernandes, C. M.; Figueiredo, D.; Carvalho, O.; Silva, F. S.; Miranda, G.. "Effect of laser surface texturing on the wettability of WC-Co cutting tools". The International Journal of Advanced Manufacturing Technology 111 7-8 (2020): 1991-1999. http://dx.doi.org/10.1007/s00170-020-06155-3.
    10.1007/s00170-020-06155-3
  35. Bartolomeu, F.; Costa, M.M.; Alves, N.; Miranda, G.; Silva, F.S.. "Engineering the elastic modulus of NiTi cellular structures fabricated by selective laser melting". Journal of the Mechanical Behavior of Biomedical Materials 110 (2020): 103891. http://dx.doi.org/10.1016/j.jmbbm.2020.103891.
    10.1016/j.jmbbm.2020.103891
  36. Marques, Ana; Miranda, Georgina; Silva, Filipe; Pinto, Paulo; Carvalho, Óscar. "Review on current limits and potentialities of technologies for biomedical ceramic scaffolds production". Journal of Biomedical Materials Research Part B: Applied Biomaterials 109 3 (2020): 377-393. http://dx.doi.org/10.1002/jbm.b.34706.
    10.1002/jbm.b.34706
  37. Melo-Fonseca, F.; Miranda, G.; Domingues, Helena S.; Pinto, Inês Mendes; Gasik, Michael; Silva, F. S.. "Reengineering Bone-Implant Interfaces for Improved Mechanotransduction and Clinical Outcomes". Stem Cell Reviews and Reports 16 6 (2020): 1121-1138. http://dx.doi.org/10.1007/s12015-020-10022-9.
    10.1007/s12015-020-10022-9
  38. Pereira, H.; Carvalho, O.; Miranda, G.; Silva, F. S.. "Pure magnesium laser surface modification using Nd:YAG laser". Materials Technology 36 13 (2020): 811-815. http://dx.doi.org/10.1080/10667857.2020.1797326.
    10.1080/10667857.2020.1797326
  39. da Cruz, Mariana Brito; Marques, Joana Faria; Peñarrieta-Juanito, Gabriella M.; Costa, Mafalda; Souza, Júlio C. M.; Magini, Ricardo S.; Miranda, Georgina; et al. "Bioactive-Enhanced Polyetheretherketone Dental Implant Materials: Mechanical Characterization and Cellular Responses". Journal of Oral Implantology 47 1 (2020): 9-17. http://dx.doi.org/10.1563/aaid-joi-d-19-00172.
    10.1563/aaid-joi-d-19-00172
  40. Guimarães, B.; Fernandes, C.M.; Figueiredo, D.; Cerqueira, M.F.; Carvalho, O.; Silva, F.S.; Miranda, G.. "A novel approach to reduce in-service temperature in WC-Co cutting tools". Ceramics International 46 3 (2020): 3002-3008. http://dx.doi.org/10.1016/j.ceramint.2019.09.299.
    10.1016/j.ceramint.2019.09.299
  41. Bartolomeu, F.; Dourado, N.; Pereira, F.; Alves, N.; Miranda, G.; Silva, F.S.. "Additive manufactured porous biomaterials targeting orthopedic implants: A suitable combination of mechanical, physical and topological properties". Materials Science and Engineering: C 107 (2020): 110342. http://dx.doi.org/10.1016/j.msec.2019.110342.
    10.1016/j.msec.2019.110342
  42. Miranda, G; Guimarães, B; Pereira, D; Buciumeanu, M; Cabral, A; Fredel, M; Silva, FS; Henriques, B. "Mechanical and tribological performance of Ni–Co-based binders for cubic boron nitride cutting tools". Journal of Composite Materials 54 20 (2020): 2753-2760. http://dx.doi.org/10.1177/0021998320902514.
    10.1177/0021998320902514
  43. CRUZ, Mariana Brito da; MARQUES, Joana Faria; FERNANDES, Beatriz Ferreira; COSTA, Mafalda; MIRANDA, Georgina; MATA, António Duarte Sola Pereira da; CARAMES, João Manuel Mendez; SILVA, Filipe Samuel. "Gingival fibroblasts behavior on bioactive zirconia and titanium dental implant surfaces produced by a functionally graded technique". Journal of Applied Oral Science 28 (2020): http://dx.doi.org/10.1590/1678-7757-2020-0100.
    10.1590/1678-7757-2020-0100
  44. Carvalho, O.; Buciumeanu, M.; Miranda, G.; Madeira, S.; Silva, F.S.. "Corrigendum to “Development of a method to produce FGMs by controlling the reinforcement distribution” [Materials and Design 92 (2016) 233–239]. (Materials and Design (2016) 92 (233–239), (S0264127515308911), (10.1016/j.matdes.2015.12.032))". Materials and Design 195 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85089425111&partnerID=MN8TOARS.
    10.1016/j.matdes.2020.109013
  45. COSTA, M.M.; DANTAS, T.A.; BARTOLOMEU, F.; ALVES, N.; SILVA, F.S.; MIRANDA, G.; TOPTAN, F.. "Corrosion behaviour of PEEK or ß-TCP-impregnated Ti6Al4V SLM structures targeting biomedical applications". Transactions of Nonferrous Metals Society of China 29 12 (2019): 2523-2533. http://dx.doi.org/10.1016/s1003-6326(19)65160-5.
    10.1016/s1003-6326(19)65160-5
  46. Bartolomeu, F.; Fonseca, J.; Peixinho, N.; Alves, N.; Gasik, M.; Silva, F.S.; Miranda, G.. "Predicting the output dimensions, porosity and elastic modulus of additive manufactured biomaterial structures targeting orthopedic implants". Journal of the Mechanical Behavior of Biomedical Materials 99 (2019): 104-117. http://dx.doi.org/10.1016/j.jmbbm.2019.07.023.
    10.1016/j.jmbbm.2019.07.023
  47. Azarniya, Abolfazl; Colera, Xabier Garmendia; Mirzaali, Mohammad J.; Sovizi, Saeed; Bartolomeu, Flavio; St Weglowski, Mare,k; Wits, Wessel W.; et al. "Additive manufacturing of Ti–6Al–4V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties". Journal of Alloys and Compounds 804 (2019): 163-191. http://dx.doi.org/10.1016/j.jallcom.2019.04.255.
    10.1016/j.jallcom.2019.04.255
  48. Marques, Ana; Miranda, Georgina; Faria, Diana; Pinto, Paulo; Silva, Filipe; Carvalho, Óscar. "Novel design of low modulus high strength zirconia scaffolds for biomedical applications". Journal of the Mechanical Behavior of Biomedical Materials 97 (2019): 375-384. http://dx.doi.org/10.1016/j.jmbbm.2019.05.005.
    10.1016/j.jmbbm.2019.05.005
  49. Costa, M.M.; Bartolomeu, F.; Alves, N.; Silva, F.S.; Miranda, G.. "Tribological behavior of bioactive multi-material structures targeting orthopedic applications". Journal of the Mechanical Behavior of Biomedical Materials 94 (2019): 193-200. http://dx.doi.org/10.1016/j.jmbbm.2019.02.028.
    Published • 10.1016/j.jmbbm.2019.02.028
  50. Costa, M.M.; Lima, R.; Melo-Fonseca, F.; Bartolomeu, F.; Alves, N.; Miranda, A.; Gasik, M.; et al. "Development of ß-TCP-Ti6Al4V structures: Driving cellular response by modulating physical and chemical properties". Materials Science and Engineering: C 98 (2019): 705-716. http://dx.doi.org/10.1016/j.msec.2019.01.016.
    10.1016/j.msec.2019.01.016
  51. Guimarães, B.; Figueiredo, D.; Fernandes, C.M.; Silva, F.S.; Miranda, G.; Carvalho, O.. "Laser machining of WC-Co green compacts for cutting tools manufacturing". International Journal of Refractory Metals and Hard Materials (2019): http://dx.doi.org/10.1016/j.ijrmhm.2019.03.018.
    Published • 10.1016/j.ijrmhm.2019.03.018
  52. Miranda, G.; Faria, S.; Bartolomeu, F.; Pinto, E.; Alves, N.; Peixinho, N.; Gasik, M.; Silva, F.S.. "A study on the production of thin-walled Ti6Al4V parts by selective laser melting". Journal of Manufacturing Processes 39 (2019): 346-355. http://dx.doi.org/10.1016/j.jmapro.2018.12.036.
    Published • 10.1016/j.jmapro.2018.12.036
  53. da Cruz, Mariana; Marques, Joana; Peñarrieta-Juanito, Gabriella; Costa, Mafalda; Souza, Júlio; Magini, Ricardo; Miranda, Georgina; et al. "Hard and Soft Tissue Cell Behavior on Polyetheretherketone, Zirconia, and Titanium Implant Materials". The International Journal of Oral & Maxillofacial Implants 34 1 (2019): 39-46. http://dx.doi.org/10.11607/jomi.6926.
    Published • 10.11607/jomi.6926
  54. Bartolomeu, F.; Buciumeanu, M.; Costa, M.M.; Alves, N.; Gasik, M.; Silva, F.S.; Miranda, G.. "Multi-material Ti6Al4V & PEEK cellular structures produced by Selective Laser Melting and Hot Pressing: A tribocorrosion study targeting orthopedic applications". Journal of the Mechanical Behavior of Biomedical Materials 89 (2019): 54-64. http://dx.doi.org/10.1016/j.jmbbm.2018.09.009.
    10.1016/j.jmbbm.2018.09.009
  55. Toptan, F.; Alves, A.C.; Carvalho, Ó.; Bartolomeu, F.; Pinto, A.M.P.; Silva, F.; Miranda, G.. "Corrosion and tribocorrosion behaviour of Ti6Al4V produced by selective laser melting and hot pressing in comparison with the commercial alloy". Journal of Materials Processing Technology 266 (2019): 239-245. http://www.scopus.com/inward/record.url?eid=2-s2.0-85056596158&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2018.11.008
  56. Bartolomeu, F.; Abreu, C.S.; Moura, C.G.; Costa, M.M.; Alves, N.; Silva, F.S.; Miranda, G.. "Ti6Al4V-PEEK multi-material structures – design, fabrication and tribological characterization focused on orthopedic implants". Tribology International (2019): 672-678. http://www.scopus.com/inward/record.url?eid=2-s2.0-85057465155&partnerID=MN8TOARS.
    10.1016/j.triboint.2018.11.017
  57. Costa, M.M.; Lima, R.; Melo-Fonseca, F.; Bartolomeu, F.; Alves, N.; Miranda, A.; Gasik, M.; et al. "Development of ß-TCP-Ti6Al4V structures: Driving cellular response by modulating physical and chemical properties". Materials Science and Engineering C 98 (2019): 705-716. http://www.scopus.com/inward/record.url?eid=2-s2.0-85059872382&partnerID=MN8TOARS.
    10.1016/j.msec.2019.01.016
  58. Bartolomeu, F.; Buciumeanu, M.; Costa, M.M.; Alves, N.; Gasik, M.; Silva, F.S.; Miranda, G.. "Multi-material Ti6Al4V & PEEK cellular structures produced by Selective Laser Melting and Hot Pressing: A tribocorrosion study targeting orthopedic applications". Journal of the Mechanical Behavior of Biomedical Materials 89 (2019): 54-64. http://www.scopus.com/inward/record.url?eid=2-s2.0-85053827155&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2018.09.009
  59. Miranda, G.; Sousa, F.; Costa, M.M.; Bartolomeu, F.; Silva, F.S.; Carvalho, O.. "Surface design using laser technology for Ti6Al4V-hydroxyapatite implants". Optics and Laser Technology 109 (2019): 488-495. http://www.scopus.com/inward/record.url?eid=2-s2.0-85052283594&partnerID=MN8TOARS.
    10.1016/j.optlastec.2018.08.034
  60. Bartolomeu, F.; Costa, M.M.; Gomes, J.R.; Alves, N.; Abreu, C.S.; Silva, F.S.; Miranda, G.. "Implant surface design for improved implant stability – A study on Ti6Al4V dense and cellular structures produced by Selective Laser Melting". Tribology International 129 (2019): 272-282. http://www.scopus.com/inward/record.url?eid=2-s2.0-85052659203&partnerID=MN8TOARS.
    10.1016/j.triboint.2018.08.012
  61. Miranda, G.; Guimarães, B.; Pereira, D.; Buciumeanu, M.; Cabral, A.; Fredel, M.; Silva, F.S.; Henriques, B.. "Mechanical and tribological performance of Ni-Co based binders for CBN cutting tools". Journal of Materials Processing Technology (2019):
    Submitted
  62. Guimarães, B.; Figueiredo, D.; Fernandes, C.M.; Cerqueira, M.F.; Carvalho, O.; Silva, F.S.; Miranda, G.. "A novel approach to reduce in-service temperature in WC-Co cutting tools". International Journal of Machine Tools and Manufacture (2019):
    Under revision
  63. COSTA, M.M.; DANTAS, T.A.; BARTOLOMEU, F.; ALVES, N.; SILVA, F.S.; MIRANDA, G.; TOPTAN, F.. "Corrosion behaviour of PEEK or ß-TCP-impregnated Ti6Al4V SLM structures targeting biomedical applications". Transactions of Nonferrous Metals Society of China (English Edition) 29 12 (2019): 2523-2533. http://www.scopus.com/inward/record.url?eid=2-s2.0-85077038282&partnerID=MN8TOARS.
    10.1016/S1003-6326(19)65160-5
  64. Souza, J.C.M.; Cruz, M.B.; Marques, J.; Matta, A.; Juanito, G.M.P.; Costa, M.M.; Miranda, G.; et al. "Human osteoblast and fibroblast behavior on modified zirconia implant surfaces". Clinical Oral Implants Research 29 (2018): 190. http://dx.doi.org/10.1111/clr.75_13358.
    Published • 10.1111/clr.75_13358
  65. Peñarrieta-Juanito, Gabriella; Cruz, Mariana; Costa, Mafalda; Miranda, Georgina; Marques, Joana; Magini, Ricardo; Mata, António; et al. "A novel gradated zirconia implant material embedding bioactive ceramics: Osteoblast behavior and physicochemical assessment". Materialia 1 (2018): 3-14. http://dx.doi.org/10.1016/j.mtla.2018.07.002.
    Published • 10.1016/j.mtla.2018.07.002
  66. Peñarrieta-Juanito, Gabriella M.; Costa, Mafalda; Cruz, Mariana; Miranda, Georgina; Henriques, Bruno; Marques, Joana; Magini, Ricardo; et al. "Bioactivity of novel functionally structured titanium-ceramic composites in contact with human osteoblasts". Journal of Biomedical Materials Research Part A 106 7 (2018): 1923-1931. http://dx.doi.org/10.1002/jbm.a.36394.
    Published • 10.1002/jbm.a.36394
  67. Singh, Gurpreet; Goyal, Sanjeev; Miranda, Georgina; Sharma, Neeraj. "Parametric study of the dry sliding wear behaviour of AA6082-T6/SiC and AA6082-T6/B4C composites using RSM". Journal of Mechanical Science and Technology 32 2 (2018): 579-592. http://dx.doi.org/10.1007/s12206-018-0105-5.
    Published • 10.1007/s12206-018-0105-5
  68. Carvalho, O.; Sousa, F.; Madeira, S.; Silva, F.S.; Miranda, G.. "HAp-functionalized zirconia surfaces via hybrid laser process for dental applications". Optics and Laser Technology 106 (2018): 157-167. http://www.scopus.com/inward/record.url?eid=2-s2.0-85045281171&partnerID=MN8TOARS.
    10.1016/j.optlastec.2018.03.017
  69. Dantas, T.A.; Costa, M.M.; Miranda, G.; Silva, F.S.; Abreu, C.S.; Gomes, J.R.. "Effect of HAp and ß-TCP incorporation on the tribological response of Ti6Al4V biocomposites for implant parts". Journal of Biomedical Materials Research - Part B Applied Biomaterials 106 3 (2018): 1010-1016. http://www.scopus.com/inward/record.url?eid=2-s2.0-85018411403&partnerID=MN8TOARS.
    10.1002/jbm.b.33908
  70. Costa, M.M.; Flores, P.; Pereira, D.; Buciumeanu, M.; Cabral, A.; Fredel, M.; Silva, F.S.; Henriques, B.; Miranda, G.. "Nickel-cobalt-based materials for diamond cutting tools". International Journal of Advanced Manufacturing Technology 95 1-4 (2018): 1059-1067. http://www.scopus.com/inward/record.url?eid=2-s2.0-85033364723&partnerID=MN8TOARS.
    10.1007/s00170-017-1226-9
  71. Faria, D.; Abreu, C.S.; Buciumeanu, M.; Dourado, N.; Carvalho, O.; Silva, F.S.; Miranda, G.. "Ti6Al4V laser surface preparation and functionalization using hydroxyapatite for biomedical applications". Journal of Biomedical Materials Research - Part B Applied Biomaterials 106 4 (2018): 1534-1545. http://www.scopus.com/inward/record.url?eid=2-s2.0-85026326169&partnerID=MN8TOARS.
    10.1002/jbm.b.33964
  72. Buciumeanu, M.; Almeida, S.; Bartolomeu, F.; Costa, M.M.; Alves, N.; Silva, F.S.; Miranda, G.. "Ti6Al4V cellular structures impregnated with biomedical PEEK - New material design for improved tribological behavior". Tribology International 119 (2018): 157-164. http://www.scopus.com/inward/record.url?eid=2-s2.0-85032891584&partnerID=MN8TOARS.
    10.1016/j.triboint.2017.10.038
  73. Melo-Fonseca, F.; Lima, R.; Costa, M.M.; Bartolomeu, F.; Alves, N.; Miranda, A.; Gasik, M.; et al. "45S5 BAG-Ti6Al4V structures: The influence of the design on some of the physical and chemical interactions that drive cellular response". Materials and Design 160 (2018): 95-105. http://www.scopus.com/inward/record.url?eid=2-s2.0-85052955202&partnerID=MN8TOARS.
    10.1016/j.matdes.2018.08.056
  74. Bartolomeu, F.; Buciumeanu, M.; Pinto, E.; Alves, N.; Carvalho, O.; Silva, F.S.; Miranda, G.. "316L stainless steel mechanical and tribological behavior—A comparison between selective laser melting, hot pressing and conventional casting". Additive Manufacturing 16 (2017): 81-89. http://dx.doi.org/10.1016/j.addma.2017.05.007.
    Published • 10.1016/j.addma.2017.05.007
  75. BARTOLOMEU, F.; BUCIUMEANU, M.; PINTO, E.; ALVES, N.; SILVA, F.S.; CARVALHO, O.; MIRANDA, G.. "Wear behavior of Ti6Al4V biomedical alloys processed by selective laser melting, hot pressing and conventional casting". Transactions of Nonferrous Metals Society of China 27 4 (2017): 829-838. http://dx.doi.org/10.1016/s1003-6326(17)60060-8.
    Published • 10.1016/s1003-6326(17)60060-8
  76. Dantas, T.A.; Abreu, C.S.; Costa, M.M.; Miranda, G.; Silva, F.S.; Dourado, N.; Gomes, J.R.. "Bioactive materials driven primary stability on titanium biocomposites". Materials Science and Engineering C 77 (2017): 1104-1110. http://www.scopus.com/inward/record.url?eid=2-s2.0-85017308432&partnerID=MN8TOARS.
    10.1016/j.msec.2017.04.014
  77. Miranda, G.; Buciumeanu, M.; Costa, M.M.; Bartolomeu, F.; Silva, F.S.; Carvalho, O.. "Metallic reinforcements role on aluminum silicon composites wear behavior". Journal of Composite Materials 51 19 (2017): 2805-2812. http://www.scopus.com/inward/record.url?eid=2-s2.0-85026372984&partnerID=MN8TOARS.
    10.1177/0021998316678052
  78. Miranda, G.; Ferreira, P.; Buciumeanu, M.; Cabral, A.; Fredel, M.; Silva, F.S.; Henriques, B.. "Microstructure, Mechanical and Wear Behaviors of Hot-Pressed Copper-Nickel-Based Materials for Diamond Cutting Tools". Journal of Materials Engineering and Performance 26 8 (2017): 4046-4055. http://www.scopus.com/inward/record.url?eid=2-s2.0-85025443486&partnerID=MN8TOARS.
    10.1007/s11665-017-2819-z
  79. Madeira, S.; Miranda, G.; Soares, D.; Silva, F.S.; Carvalho, O.. "Study on damping capacity and dynamic Young's modulus of aluminium matrix composite reinforced with SiC particles". Ciencia e Tecnologia dos Materiais 29 1 (2017): e92-e96. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021917347&partnerID=MN8TOARS.
    10.1016/j.ctmat.2016.08.003
  80. Miranda, G.; Madeira, S.; Silva, F.S.; Carvalho, O.. "A nanoindentation study on Al3Ni interface of Ni reinforced aluminum-silicon composite". Mechanics of Advanced Materials and Structures 24 10 (2017): 871-874. http://www.scopus.com/inward/record.url?eid=2-s2.0-85001115481&partnerID=MN8TOARS.
    10.1080/15376494.2016.1196790
  81. Henriques, B.; Ferreira, P.; Buciumeanu, M.; Fredel, M.; Cabral, A.; Silva, F.S.; Miranda, G.. "Copper–nickel-based diamond cutting tools: stone cutting evaluation". International Journal of Advanced Manufacturing Technology (2017): 1-10. http://www.scopus.com/inward/record.url?eid=2-s2.0-85014758569&partnerID=MN8TOARS.
    10.1007/s00170-017-0220-6
  82. Buciumeanu, M.; Araujo, A.; Carvalho, O.; Miranda, G.; Souza, J.C.M.; Silva, F.S.; Henriques, B.. "Study of the tribocorrosion behaviour of Ti6Al4V – HA biocomposites". Tribology International 107 (2017): 77-84. http://www.scopus.com/inward/record.url?eid=2-s2.0-84995784252&partnerID=MN8TOARS.
    10.1016/j.triboint.2016.11.029
  83. Madeira, S.; Pinto, A.M.P.; Rodrigues, L.C.; Carvalho, O.; Miranda, G.; Reis, R.L.; Caramês, J.; Silva, F.S.. "Effect of sintering pressure on microstructure and mechanical properties of hot-pressed Ti6Al4V-ZrO2 materials". Materials and Design 120 (2017): 394-403. http://www.scopus.com/inward/record.url?eid=2-s2.0-85013418862&partnerID=MN8TOARS.
    10.1016/j.matdes.2017.02.038
  84. Bartolomeu, F.; Sampaio, M.; Carvalho, O.; Pinto, E.; Alves, N.; Gomes, J.R.; Silva, F.S.; Miranda, G.. "Tribological behavior of Ti6Al4V cellular structures produced by Selective Laser Melting". Journal of the Mechanical Behavior of Biomedical Materials 69 (2017): 128-134. http://www.scopus.com/inward/record.url?eid=2-s2.0-85008403584&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2017.01.004
  85. Carvalho, O.; Miranda, G.; Buciumeanu, M.; Gasik, M.; Silva, F.S.; Madeira, S.. "High temperature damping behavior and dynamic Young’s modulus of AlSi–CNT–SiC p hybrid composite". Composite Structures 141 (2016): 155-162. http://dx.doi.org/10.1016/j.compstruct.2016.01.046.
    Published • 10.1016/j.compstruct.2016.01.046
  86. Carvalho, O.; Madeira, S.; Buciumeanu, M.; Soares, D.; Silva, F.S.; Miranda, G.. "Pressure and sintering temperature influence on the interface reaction of SiCp/410L stainless steel composites". Journal of Composite Materials 50 15 (2016): 2005-2015. http://www.scopus.com/inward/record.url?eid=2-s2.0-84968764067&partnerID=MN8TOARS.
    10.1177/0021998315598851
  87. Miranda, G.; Araújo, A.; Bartolomeu, F.; Buciumeanu, M.; Carvalho, O.; Souza, J.C.M.; Silva, F.S.; Henriques, B.. "Design of Ti6Al4V-HA composites produced by hot pressing for biomedical applications". Materials and Design 108 (2016): 488-493. http://www.scopus.com/inward/record.url?eid=2-s2.0-84978131783&partnerID=MN8TOARS.
    10.1016/j.matdes.2016.07.023
  88. Madeira, S.; Miranda, G.; Carneiro, V.H.; Soares, D.; Silva, F.S.; Carvalho, O.. "The effect of SiCp size on high temperature damping capacity and dynamic Young's modulus of hot-pressed AlSi-SiCp MMCs". Materials and Design 93 (2016): 409-417. http://www.scopus.com/inward/record.url?eid=2-s2.0-84957812731&partnerID=MN8TOARS.
    10.1016/j.matdes.2015.12.147
  89. Carvalho, O.; Buciumeanu, M.; Madeira, S.; Soares, D.; Silva, F.S.; Miranda, G.. "Mechanisms governing the mechanical behavior of an AlSi-CNTs-SiCp hybrid composite". Composites Part B: Engineering 90 (2016): 443-449. http://www.scopus.com/inward/record.url?eid=2-s2.0-84957951268&partnerID=MN8TOARS.
    10.1016/j.compositesb.2016.01.032
  90. Bartolomeu, F.; Faria, S.; Carvalho, O.; Pinto, E.; Alves, N.; Silva, F.S.; Miranda, G.. "Predictive models for physical and mechanical properties of Ti6Al4V produced by Selective Laser Melting". Materials Science and Engineering A 663 (2016): 181-192. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962440953&partnerID=MN8TOARS.
    10.1016/j.msea.2016.03.113
  91. Miranda, G.; Faria, S.; Bartolomeu, F.; Pinto, E.; Madeira, S.; Mateus, A.; Carreira, P.; et al. "Predictive models for physical and mechanical properties of 316L stainless steel produced by selective laser melting". Materials Science and Engineering A 657 (2016): 43-56. http://www.scopus.com/inward/record.url?eid=2-s2.0-84955057093&partnerID=MN8TOARS.
    10.1016/j.msea.2016.01.028
  92. Carvalho, O.; Buciumeanu, M.; Miranda, G.; Madeira, S.; Silva, F.S.. "Development of a method to produce FGMs by controlling the reinforcement distribution". Materials and Design 92 (2016): 233-239. http://www.scopus.com/inward/record.url?eid=2-s2.0-84954505005&partnerID=MN8TOARS.
    10.1016/j.matdes.2015.12.032
  93. Carvalho, O.; Buciumeanu, M.; Madeira, S.; Miranda, G.; Silva, F.S.. "Interface analysis on an eutectic AlSi alloy reinforced with Ni coated MWCNT". Composites Part B: Engineering 93 (2016): 229-235. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962018386&partnerID=MN8TOARS.
    10.1016/j.compositesb.2016.03.050
  94. O. Carvalho; G. Miranda; D. Soares; F. S. Silva. "Carbon nanotube dispersion in aluminum matrix composites—Quantification and influence on strength". Mechanics of Advanced Materials and Structures 23 1 (2016): 66-73. http://dx.doi.org/10.1080/15376494.2014.929766.
    10.1080/15376494.2014.929766
  95. Madeira, S.; Carvalho, O.; Carneiro, V.H.; Soares, D.; Silva, F.S.; Miranda, G.. "Damping capacity and dynamic modulus of hot pressed AlSi composites reinforced with different SiC particle sized". Composites Part B: Engineering 90 (2016): 399-405. http://www.scopus.com/inward/record.url?eid=2-s2.0-84957941866&partnerID=MN8TOARS.
    10.1016/j.compositesb.2016.01.008
  96. Carvalho, O.; Buciumeanu, M.; Madeira, S.; Soares, D.; Silva, F.S.; Miranda, G.. "Optimization of AlSi–CNTs functionally graded material composites for engine piston rings". Materials & Design 80 (2015): 163-173. http://dx.doi.org/10.1016/j.matdes.2015.05.018.
    Published • 10.1016/j.matdes.2015.05.018
  97. Miranda, G.. "Properties assessment of nickel particulate-reinforced aluminum composites produced by hot pressing". Journal of Composite Materials (2015):
    10.1177/0021998315577148
  98. Henriques, B.; Miranda, G.; Gasik, M.; Souza, J.C.M.; Nascimento, R.M.; Silva, F.S.. "Finite element analysis of the residual thermal stresses on functionally gradated dental restorations". Journal of the Mechanical Behavior of Biomedical Materials 50 (2015): 123-130. http://www.scopus.com/inward/record.url?eid=2-s2.0-84932627264&partnerID=MN8TOARS.
    10.1016/j.jmbbm.2015.06.003
  99. Henriques, B.; Gasik, M.; Miranda, G.; Souza, J.C.M.; Nascimento, R.M.; Silva, F.S.. "Improving the functional design of dental restorations by adding a composite interlayer in the multilayer system: Multi-aspect analysis". Ciencia e Tecnologia dos Materiais 27 1 (2015): 36-40. http://www.scopus.com/inward/record.url?eid=2-s2.0-84947723583&partnerID=MN8TOARS.
    10.1016/j.ctmat.2015.06.002
  100. Carvalho, O.; Buciumeanu, M.; Madeira, S.; Soares, D.; Silva, F.S.; Miranda, G.. "Dry sliding wear behaviour of AlSi-CNTs-SiCp hybrid composites". Tribology International 90 (2015): 148-156. http://www.scopus.com/inward/record.url?eid=2-s2.0-84928957407&partnerID=MN8TOARS.
    10.1016/j.triboint.2015.04.031
  101. Carvalho, O.; Buciumeanu, M.; Miranda, G.; Costa, N.; Soares, D.; Silva, F. S.. "Mechanisms Governing the Tensile, Fatigue and Wear Behavior of Carbon Nanotube Reinforced Aluminum Alloy". Mechanics of Advanced Materials and Structures (2015): 00-00.
    10.1080/15376494.2015.1063176
  102. Miranda, G.; Buciumeanu, M.; Madeira, S.; Carvalho, O.; Soares, D.; Silva, F.S.. "Hybrid composites - Metallic and ceramic reinforcements influence on mechanical and wear behavior". Composites Part B: Engineering 74 (2015): 153-165. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922560627&partnerID=MN8TOARS.
    10.1016/j.compositesb.2015.01.007
  103. Miranda, G.; Buciumeanu, M.; Carvalho, O.; Soares, D.; Silva, F.S.. "Interface analysis and wear behavior of Ni particulate reinforced aluminum-silicon composites produced by PM". Composites Part B: Engineering 69 (2015): 101-110. http://www.scopus.com/inward/record.url?eid=2-s2.0-84908517865&partnerID=MN8TOARS.
    10.1016/j.compositesb.2014.09.017
  104. Carvalho, O.; Buciumeanu, M.; Soares, D.; Silva, F.S.; Miranda, G.. "Evaluation of CNT Dispersion Methodology Effect on Mechanical Properties of an AlSi Composite". Journal of Materials Engineering and Performance 24 6 (2015): 2535-2545. http://www.scopus.com/inward/record.url?eid=2-s2.0-84929843164&partnerID=MN8TOARS.
    10.1007/s11665-015-1510-5
  105. Miranda, G.; Silva, F.S.; Soares, D.. "Solid state transformations and equilibrium crystal structures of an Au-Cu alloy with shape memory effect". Materials Science Forum 730-732 (2013): 859-864. http://www.scopus.com/inward/record.url?eid=2-s2.0-84870733947&partnerID=MN8TOARS.
    10.4028/www.scientific.net/MSF.730-732.859
  106. Miranda, G.; Carvalho, O.; Silva, F.S.; Soares, D.. "Effect of sintering stage in NiTi short-fibre-reinforced aluminium-silicon composites interface properties". Journal of Composite Materials 47 13 (2013): 1625-1631. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878828286&partnerID=MN8TOARS.
    10.1177/0021998312449893
  107. Carvalho, O.; Miranda, G.; Soares, D.; Silva, F.S.. "CNT-reinforced aluminum composites: Processing and mechanical properties". Ciencia e Tecnologia dos Materiais 25 2 (2013): 75-78. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901476683&partnerID=MN8TOARS.
    10.1016/j.ctmat.2014.03.002
  108. Silva, F S; Mazare, L; Pinto, P; Miranda, G; Soares, D. "On assessment of processing variables on copper–tin functionally graded alloys produced by incremental melting and solidification process". Materials Science and Technology 28 6 (2012): 748-753. http://dx.doi.org/10.1179/1743284712y.0000000013.
    Published • 10.1179/1743284712y.0000000013
  109. Mazare, L.; Miranda, G.; Soares, D.F.; Silva, F.S.. "Influence of solidification rates on a Directional Solidification process for the production of Functionally Graded Materials". International Journal of Materials and Product Technology 39 1/2 (2010): 44. http://dx.doi.org/10.1504/ijmpt.2010.034259.
    Published • 10.1504/ijmpt.2010.034259
  110. Mazare, L.; Miranda, G.; Soares, D.; Silva, F.S.. "On the ability of producing copper-silver functionally graded alloys by using an incremental melting and solidification process". Journal of Materials Processing Technology 209 15-16 (2009): 5702-5710. http://www.scopus.com/inward/record.url?eid=2-s2.0-67650753503&partnerID=MN8TOARS.
    10.1016/j.jmatprotec.2009.05.033
Thesis / Dissertation
  1. Miranda, Maria Georgina Macedo. "Development of aluminum based composites by pressure-assisted sintering". PhD, 2015. http://hdl.handle.net/1822/38010.
  2. Miranda, G.. "Análise do efeito de memória de forma em ligas de ouro". Master, Universidade do Minho, 2009.

Other

Other output
  1. Sintering time: influence on interface properties of NiTi fiber-reinforced aluminum composites. 2013.
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2016/06/04 3D Growing of Smart Components: Strategies and Applications Ciência2016
FCT (Lisboa, Portugal)
2015/12/11 Functional graded materials approaches for biomedical implants 5th Advanced Course on Regenerative Medicine
Centre for Rapid and Sustainable Product Development (CDRSP) (Marinha Grande, Portugal)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2023/09/30 - Current Desenvolvimento de componentes multi-material reabsorvíveis por manufatura aditiva para aplicações biomédicas
Supervisor
 Materials Engineering (Master)
Universidade de Aveiro Departamento de Engenharia de Materiais e Cerâmica, Portugal
2023/09/30 - Current Manufatura aditiva e manufatura híbrida de componentes metálicos inovadores para aplicações industriais
Supervisor
 Materials Engineering (Master)
Universidade de Aveiro Departamento de Engenharia de Materiais e Cerâmica, Portugal
2021/09 - Current Design and additive manufacturing of osteogenic-stimulating implants
Supervisor of Juliana Marques Dias
 Mechanical Engineering (PhD)
Universidade do Minho - Campus de Azurém, Portugal
2018/03 - Current High strength bone substitutes: customized blocks for patient-specific defects
Supervisor of Helena Filipa Pereira
 Leaders for Technical Industries (LTI-MIT Portugal) (PhD)
Universidade do Minho, Portugal
2018/03 - 2024/02/28 Design of osteogenic-stimulating implants by mechanotransduction modulation
Supervisor of Francisca Melo Fonseca
 Leaders for Technical Industries (LTI-MIT Portugal) (PhD)
Universidade do Minho, Portugal
2019/02 - 2024/01/31 Multi-functional WC-Co cutting tool - a Multi-Material Engineering Design
Supervisor of Bruno Miguel Pereira Guimarães
 Mechanical Engineering (PhD)
Universidade do Minho, Portugal
2022/09 - 2023/12/15 Design, manufacture, and characterization of innovative metal-ceramic interpenetrating phase composites
Supervisor of Simão Santos
 Materials Engineering (Master)
Universidade de Aveiro, Portugal
2022/09 - 2023/09/19 Selective Laser Melting of nano TiC reinforced 18Ni300 Maraging steel for injection moulding applications
Supervisor of Francisco Fernandes Leite
 Materials Engineering (Master)
Universidade de Aveiro, Portugal
2021/10 - 2023/01/26 Metal-ceramic components manufactured by additive manufacturing and investment casting
Supervisor of Carlos Pedro Esteves Matos
Materials Engineering (Master)
Universidade de Aveiro, Portugal
2021/10 - 2022/11/30 Additive manufacturing of steel structures with controlled permeability for injection molding applications
Supervisor of Diogo Filipe Costa Oliveira
 Materials Engineering (Master)
Universidade de Aveiro, Portugal
2017/03 - 2022/05/10 Multi-functional Multi-material Structures for Orthopedic Implants using Laser-assisted Strategies
Supervisor of Ana Mafalda Meneses Costa
 Engenharia Mecânica (PhD)
Universidade do Minho, Portugal
2020/09/01 - 2021/11 Manufacturing multi-material cutting tools (Steel/WC-Co) by using a laser texturing strategy
Supervisor of Liudmila Patrícia Guimarães Basílio
 Materials Engineering Integrated Master (Master)
Universidade do Minho - Campus de Azurém, Portugal
2020/09/01 - 2021/11 Additive manufacturing multi-material cutting tools
Supervisor of Ana Rita Pereira Guedes
 Materials Engineering Integrated Master (Master)
Universidade do Minho - Campus de Azurém, Portugal
2019/09 - 2021/07/30 Magnesium powder functionalization for biomedical applications
Co-supervisor of Paula Cristina Félix Vieira
 Engenharia Mecânica (Master)
Universidade do Minho, Portugal
2016/03 - 2019/12/02 Smart design of multi-functional and multi-material NiTi-Ti6Al4V cellular structured implants by Selective Laser Melting
Supervisor of Flávio Jorge Fernandes Bartolomeu
 Engenharia Mecânica (PhD)
Universidade do Minho, Portugal
2017/09 - 2018/12/07 Modelling additive manufactured titanium alloy cellular structures
Supervisor of José Eduardo Faria de Carvalho Fonseca
 Engenharia Mecânica (Master)
Universidade do Minho, Portugal
2017/09 - 2018/11/26 Production of Zirconia structures for biomedical applications
Co-supervisor of Ana Cristina Ribeiro Marques
 Engenharia Mecânica (Master)
Universidade do Minho, Portugal
2017/09 - 2018/10/09 Produção e caracterização de ferramentas de corte obtidas por tecnologia laser
Supervisor of Bruno Miguel Pereira Guimarães
 Engenharia de Materiais (Master)
Universidade do Minho, Portugal
2017 - 2018/06/14 Estruturas celulares multimaterial obtidas por manufactura aditiva para aplicações biomédicas
Supervisor of Susana Patrícia da Silva Almeida
 Engenharia de Materiais (Master)
Universidade do Minho, Portugal
2017 - 2018/01/24 Laser surface modification of 316L steel
Supervisor of Armando Rafael Freitas dos Santos
 Engenharia de Materiais (Master)
Universidade do Minho, Portugal
2015/09 - 2016/12/07 Development of NiTi actuators elements for biomedical applications
Supervisor of Ana Francisca Guimarães Dias
 Engenharia de Materiais (Master)
Universidade do Minho, Portugal
2015/09 - 2016/11/25 Processamento e caracterização mecânica e metalográfica de compósitos à base de níquel-cobalto obtidos por hot pressing
Co-supervisor of Danilo Rúben Ribeiro Pereira
 Engenharia de Materiais (Master)
Universidade do Minho, Portugal
2015/09 - 2016/09/21 Development of bioactive materials for dental implants using powder metallurgy
Supervisor of Ana Mafalda Meneses Costa
 Engenharia Biomédica (Master)
Universidade do Minho, Portugal
2015/09 - 2016/09/14 Application of bioactive materials on the surface of Ti-6Al-4V implants using laser sintering
Supervisor of Diana Marisa Monteiro Faria
 Engenharia de Materiais (Master)
Universidade do Minho, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2018/05/18 - 2018/05/18 BIOMAT DEVICES WORKSHOP (2018/05/18)
Workshop (Member of the Organising Committee)
2016/12/06 - 2016/12/06 IMPLANTS FOR THE FUTURE - Workshop on challenges and strategies (2016/12/06)
Workshop (Co-organisor)
 Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2016/06/30 - 2016/06/30 Science and Tecnology Brainstorming Meeting – 6th Edition (2016/06/30)
Round table (Co-organisor)
 Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2016/04/27 - 2016/04/27 Science and Tecnology Brainstorming Meeting – 5th Edition (2016/04/27)
Round table (Co-organisor)
 Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2016/03/30 - 2016/03/30 Science and Tecnology Brainstorming Meeting – 4th Edition (2016/03/30)
Round table (Co-organisor)
 Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2016/02/24 - 2016/02/24 Science and Tecnology Brainstorming Meeting – 3rd Edition (2016/02/24)
Round table (Co-organisor)
 Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2016/01/13 - 2016/01/13 Science and Tecnology Brainstorming Meeting – 2nd Edition (2016/01/13)
Round table (Co-organisor)
 Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2015/12/14 - 2015/12/15 Functionally Graded Materials for dental implants - International workshop on FGMs (2015/12/14 - 2015/12/15)
Workshop (Co-organisor)
 Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal
2015/11/25 - 2015/11/25 Science and Tecnology Brainstorming Meeting – 1st Edition (2015/11/25)
Round table (Co-organisor)
 Universidade do Minho Centro de Sistemas Microeletromecânicos, Portugal

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2023/01/10 Projeto, manufatura e validação mecânica de uma solução multimaterial metal/cerâmica (liga Ti6AI4V e Zircónia) para implantes de joelhos
(Thesis) Main arguer
 David Mota (Master)
Universidade do Minho, Portugal
2019/12/04 Numerical simulation of structures optimized for impact energy absorption
(Thesis) Main arguer
 João Pedro Martins Leal (Master)
Universidade do Minho, Portugal
2018/10/18 Projeto Mecânico de Espaçador de Prótese de Joelho
(Thesis) Main arguer
 Ricardo Alexandre Carvalho Boucinha (Master)
Universidade do Minho, Portugal
2018/04/17 Desenvolvimento e fabrico de um sistema de recoating para manufatura aditiva
(Thesis) Main arguer
 Marco André Viana de Sousa (Master)
Universidade do Minho, Portugal
2018/03/16 Customized knee implants based on hybrid technology
(Thesis) Arguer
 Diana Marisa Monteiro Faria (Other)
Universidade do Minho - Campus de Azurém, Portugal
2017/12/21 Three dimensional cell scaffold constructs for application in bone tissue engineering
(Thesis) Main arguer
 Helena Filipa Ribeiro da Silva Pereira (Master)
Universidade do Minho, Portugal
2017/12/04 Sinterização Laser direta 3D de cerâmicos técnicos para aplicações em implantes dentários
(Thesis) Main arguer
 João Pedro Carneiro Neto (Master)
Universidade do Minho, Portugal
2017/10/03 Avaliação de revestimentos da liga Ni-Cr-B-Si depositados pelo processo de laser cladding
(Thesis) Main arguer
 Diogo Brandão Brito e Cunha (Master)
Universidade do Minho, Portugal
2016/11/08 Application of bioactive materials on the surface of ZrO2 implants using laser sintering
(Thesis) Main arguer
 Filipa Jordão Xavier e Sousa (Master)
Universidade do Minho, Portugal
2016/10/25 Desenvolvimento de materiais híbridos metal-cerâmico com gradiente funcional através de sinterização/fusão a laser
(Thesis) Arguer
 Sara Cristina Soares Madeira (Other)
Universidade do Minho - Campus de Azurém, Portugal
2015/11/25 Dynamic modelling and analysis of hydraulic forces in radial blood pumps
(Thesis) Main arguer
 Ana Rita Pires Quintas (Master)
Universidade do Minho, Portugal
2015/11/18 Processamento e caracterização de FGMs de Ti/HAP para aplicações biomédicas
(Thesis) Main arguer
 Andreia Sofia Sá Araújo (Master)
Universidade do Minho, Portugal
2015/10/20 Processamento e caracterização mecânica e metalográfica de compósitos adiamantados à base de cobre-níquel obtidos por hot pressing
(Thesis) Main arguer
 Pedro Alexandre Monteiro Ferreira (Master)
Universidade do Minho, Portugal

Conference scientific committee

Conference name Conference host
2017/09/25 - 2017/09/27 MatCel'2017 & DynMatCel'2017 Conference University of Aveiro, Portugal
Distinctions

Other distinction

2017 Best experimental Model Paper Award - Enhancing bioactivity of Ti6Al4V hip implants: strategies from composites to textured surfaces
2010 Award for scholar achievement - Best Mechanical Enginering Student of U.Minho in the year 2009/10