???global.info.a_carregar???
M. Abdollahzadeh obtained PhD in Mech. Eng. (2015), from the Univ. of Beira Interior, PT. The subject of his PhD was focused on Numerical modeling of plasma actuators for flow control related to the EU project of MAAT. In this period, he was able to explore various aspects of the plasma discharges and their influence on flow control. From 2014 to 2016, He was Post-Doc researcher at LEPABE center of Univ. of Porto working on the development of advanced numerical models for simulation of Fuel cells, Redox flow batteries, methanol steam reforming, plasma catalysis and Experimental Characterization Fuel cells for EU Project FluidCell. In 2016, He joined C-MAST (Centre for Mechanical and Aerospace Science and Technologies) at UBI as Post-Doc Researcher working on Nationally funded project UNDULANT-Next to develop magneto-hydrodynamic plasma actuators for high speed flow control. In 2017, He was awarded a Post-Doc Scholarship from Iranian National Elite Foundation to start a research career in AmirKabir Univ. of Tech. on the subject of numerical simulation of electrochemical cells. In 2018, He joined Univ. of Guilan as an assistant professor in Fluid Mechanics, where he had given lectures on various subjects including Fluid Mechanics, Introduction to CFD for both graduate and undergraduate students. In 2019 he was granted a Junior Researcher contract from The Portuguese Foundation for Science and Technology (FCT) in the 1st edition of Stimulus of Scientific employment competition to pursue his research in the field of Plasma anti-icing systems in the C-MAST center. He is author of more than 45 indexed publications (SCOPUS, WOS) in high ranked journals with over 1750 citations, h-index of 26, more than 27 meeting communications, 1 book chapter and two national and international patents . He supervised more than 11 graduate and 13 Undergraduate students, indicative of scientific leadership, and 20 have already obtained the degree under his supervision, including 1 PhD, 6 MSc and 13 BSc. He has participated actively in more than 6 funded projects, and he is the Co-PI of UBI at the National project recently funded Connect5 (2023, https://connect5.pt/). He has been jury of various academic degrees and in the scientific committee of more than 39 journals and conferences (over 130 verified peer reviews). He is academic Editor of "Int. J. Energy research" (ISSN 1099-114X), board member of "Fluids" (ISSN 311-5521), Editorial board of Int. J. Renewable Energy Technol. (ISSN 1757-3971), had been a guest editor in "Energies" (ISSN 1996-1073), "Fluids" and "Actuators" had served as External reviewer for Chilean National Commission for Research. He was Member of Scientific committee of International congress ICEUBI2022.
Read full resume ↓
Identification

Personal identification

Full name
Mohammadmahdi Abdollahzadehsangroudi

Citation names

  • Abdollahzadehsangroudi, Mohammadmahdi
  • M. Abdollahzadeh

Author identifiers

Ciência ID
FE15-2457-A47D
ORCID iD
0000-0002-9396-3855
AuthenticusID
R-001-X7P
Google Scholar ID
ETgf7uUAAAAJ
Researcher Id
C-3272-2017
Scopus Author Id
57204046649

Email addresses

  • mm.abdollahzadeh@ubi.pt (Professional)

Telephones

Mobile phone
  • 928119150 (Personal)

Addresses

  • Faculdade de Engenharia - UBI, , 6200-001, Covilhã, Covilhã, Portugal (Professional)
  • Rua Morais do Convento, Residência de Docentesda UBI, Apt -3F, 6200-371, covilha, covilha, Portugal (Personal)

Websites

Knowledge fields

  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Mechanical Engineering - Aerospace Engineering
  • Engineering and Technology - Mechanical Engineering - Mechanical Engineering
  • Engineering and Technology - Mechanical Engineering - Thermodynamics

Languages

Language Speaking Reading Writing Listening Peer-review
English Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2) Proficiency (C2)
Portuguese Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1) Upper intermediate (B2)
Persian (Mother tongue)
Education
Degree Classification
2015/03/16
Concluded
 Engenharia Mecânica (Doutoramento)
Major in Sem especialidade
Universidade da Beira Interior, Portugal
"Analysis and Development of Numerical Methodologies for Simulation of Flow Control with Dielectric Barrier Discharge Actuators" (THESIS/DISSERTATION)
 Excellent
2008/09 - 2011/08/17
Concluded
 Mechanical Engineering (Master)
Major in Energy conversion
Babol Noshirvani University of Technology, Iran
"Two Dimensional Numerical Simulations of Different Gas Flow Channels in PEM Fuel Cell" (THESIS/DISSERTATION)
 18.69 (out of 20 )
2004 - 2008/08/31
Concluded
 Mechanical Engineering (Bachelor)
Major in Thermofluids Engineering
University of Mazandaran, Iran
"Investigation on Exact and approximate analytical methods to solve nonlinear wave equation arising in Fluid Mechanics" (THESIS/DISSERTATION)
 16.38 (out of 20)
Affiliation

Science

Category
Host institution 		Employer
2017/03 - 2018/10 Postdoc (Research) Amirkabir University of Technology Department of Mechanical Engineering, Iran
2016/06 - 2017/03 Postdoc (Research) Universidade da Beira Interior Centro da Ciências e Tecnologias Mecânicas e Aeroespaciais, Portugal
2015/06 - 2016/06 Postdoc (Research) Universidade do Porto Faculdade de Engenharia, Portugal
2014/11/17 - 2015/05/17 Researcher (Research) Universidade do Porto Faculdade de Engenharia, Portugal

Teaching in Higher Education

Category
Host institution 		Employer
2024/02/01 - Current Assistant Professor (University Teacher) Universidade da Beira Interior, Portugal
2023/09/01 - 2024/01/31 Invited Assistant Professor (University Teacher) Universidade da Beira Interior, Portugal
2018/11 - 2019/04 Assistant Professor (University Teacher) University of Guilan, Iran
2017/09 - 2018/07 Lecturer (University Teacher) Mazandaran University of Science and Technology, Iran

Others

Category
Host institution 		Employer
2019/04 - 2024/01/31 FCT Junior Researcher (Contracted researcher) Universidade da Beira Interior Centro da Ciências e Tecnologias Mecânicas e Aeroespaciais, Portugal
2011/09/29 - 2014/11 Msc researcher (PhD student) Universidade da Beira Interior Centro da Ciências e Tecnologias Mecânicas e Aeroespaciais, Portugal
Projects

Grant

Designation Funders
2014/11/17 - 2016/05/01 Advanced m-CHP fuel CELL system based on a novel bio-ethanol Fluidized bed membrane reformer
621196
Post-doc Fellow
European Commission
Concluded
2011/09/29 - 2014/11 Multibody Advanced Airship for Transport
285602
PhD Student Fellow
European Commission
Concluded

Contract

Designation Funders
2019/04 - Current Smart blade based on printed sliding dielectric barrier discharge plasma actuators and higher harmonic motion for ice removal of cycloidal wind turbine
CEECIND/03347/2017
Principal investigator
Universidade da Beira Interior Centro da Ciências e Tecnologias Mecânicas e Aeroespaciais, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
2017 - Current NIPDBD
26633
Co-Principal Investigator (Co-PI)
Universidade da Beira Interior Centro da Ciências e Tecnologias Mecânicas e Aeroespaciais, Portugal
Concluded
2019/01/01 - 2019/12/31 Centro da Ciências e Tecnologias Mecânicas e Aeroespaciais
UID/EMS/00151/2019
Universidade da Beira Interior, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2016/05/01 - 2019/04/30 UNsteaDy boUndary LAyer flow coNTrol using plasma actuators of Next generation
PTDC/EMS-ENE/5742/2014
Post-doc Fellow
Universidade da Beira Interior, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded

Other

Designation Funders
2023/01 - Current HPC-Powered Simulations for Flame and Combustion Control with Dielectric Barrier Discharge Plasma Actuators
2023.10385.CPCA
Principal investigator
Ongoing
2022/10/01 - Current DIH - Connect5
2022-C16i03-03-766
Co-Principal Investigator (Co-PI)
Universidade da Beira Interior Centro da Ciências e Tecnologias Mecânicas e Aeroespaciais, Portugal
 Agência para a Competitividade e Inovação IP
Ongoing
2022/03 - Current Non-equilibrium plasma enhanced flame stabilization for high efficiency low emission combustion
2022.09877.BD
Supervisor
Universidade da Beira Interior Centro da Ciências e Tecnologias Mecânicas e Aeroespaciais, Portugal
 Fundação para a Ciência e a Tecnologia
Ongoing
Outputs

Publications

Book chapter
  1. Kheradmand, M.; Abdollahzadeh, M.; Azenha, M.; de Aguiar, J.L.B.. "Phase Change Materials as Smart Nanomaterials for Thermal Energy Storage in Buildings". In Intelligent Nanomaterials, 247-293. John Wiley & Sons, Inc., 2017.
    10.1002/9781119242628.ch9
Conference abstract
  1. Bagherighajari, Fatemeh; Jose Pascoa; Abdollahzadehsangroudi, Mohammadmahdi. "Flame stabilization and control using Dielectric Barrier Discharge plasma actuators". Paper presented in 4th ECATS conference, Delft, 2023.
  2. J. Nunes Pereira; Rodrigues, F.F.; M. Abdollahzadeh; , P. Santos; M.P. Silva; A.P. Silva; J.C. Páscoa; S. Lanceros Méndez. Corresponding author: J. Nunes Pereira. "Dielectric barrier discharge plasma actuators based on thermosetting composites for flow control in wind turbines blades". Paper presented in the XXI Congresso da Sociedade Portuguesa de Materiais – MATERIAIS 2023, Guimarãe, 2023.
    Published
Conference paper
  1. M. Abdollahzadeh; F. Rodrigues; Bagherighajari, F.; J. Nunes-Pereira; J. Carlos Páscoa; F. Dolati. "Enhanced surface cooling with Dielectric barrier discharge plasma actuators". Paper presented in International Congress on Engineering (ICEUBI22), Covilha, 2022.
    Published
  2. F. Rodrigues; M. Abdollahzadeh; João Nunes-Pereira; José Páscoa. Corresponding author: F. Rodrigues. "Plasma Actuators as novel means for icing control and aerodynamic enhancement". Paper presented in International Congress on Engineering (ICEUBI22), Covilha, 2022.
  3. S. khasare; M. Abdollahzadeh; F. Dolati; J. Mahmoudimehr. "Numerical investigation on the influence of plasma actuator location on the flame in a non-premixed combustion". Paper presented in 5th National Conference on Applied Mechanical Engineering, shahrekord, 2022.
    Published
  4. M. Modanlo; M. Abdollahzadeh; F. Dolati; H.M. Deilami. "Simulation of a jet thrust vectorising of a nozzel using a secondary jet injection". Paper presented in 5th National Conference on Applied Mechanical Engineering, shahrekord, 2022.
  5. Rodrigues, Frederico; M. Abdollahzadeh; F. Bagherighajari; J.C. Pascoa. Corresponding author: Rodrigues, Frederico. "Numerical Simulation of Anti-Icing Effect With Dbd Plasma Actuators on a Surface of an Airfoil". 2022.
    Under revision
  6. Rodrigues, F.; M. Abdollahzadeh; Bagherighajari, F.; Páscoa, J.. Corresponding author: Rodrigues, F.. "Numerical Simulation of Anti-Icing Effect With Dielectric Barrier Discharge Plasma Actuators on a Surface of an Airfoil". Paper presented in ASME 2022 Fluids Engineering Division Summer Meeting, 2022.
    10.1115/fedsm2022-87763
  7. F. Bagherighajari; A. Ramiar; M. Abdollahzadeh. "Numerical simulation and comparison of the polymer electrolyte fuel cell cells performance with various types of interdigitated flow field". Paper presented in Third National Conference on New Researches in Engineering and Applied Sciences, Boroujerd, 2021.
  8. A. Hamrang; M. Abdollahzadeh; M.J. Kermani; M. Rahgoshai. "Numerical simulation of polymer electrolyte membrane fuel cell performance enhancement by blocking the gas channel exits of serpentine flow fields". Paper presented in Third National Conference on New Researches in Engineering and Applied Sciences, Boroujerd, 2021.
  9. A. Kazemi; N. Amanifard; M. Abdollahzadeh; H. Moayedi. "Numerical study of the effect of plasma actuator on heat transfer coefficient passing through the back step". Paper presented in The 29th Annual International Conference of the Iranian Association of Mechanical Engineers and the 8th Conference on Thermal Power Plants, Tehran, 2021.
  10. Rodrigues, F.F.; Pereira, J.N.; Abdollahzadeh, M.; Pascoa, J.; Mendez, S.L.. "Comparative evaluation of dielectric materials for plasma actuators active flow control and heat transfer applications". 2021.
    10.1115/FEDSM2021-65748
  11. Rodrigues, F.F.; M. Abdollahzadeh; Pascoa, J.; Pires, L.. Corresponding author: Rodrigues, F.F.. "Influence of exposed electrode thickness on plasma actuators performance for coupled deicing and flow control applications". Paper presented in Fluids Engineering Division Summer Meeting 2021, 2021.
    10.1115/FEDSM2021-65728
  12. Rodrigues, F. F.; M. Abdollahzadeh; Pascoa, J.. "Dielectric Barrier Discharge Plasma Actuators for Active Flow Control, Ice Formation Detection and Ice Accumulation Prevention". 2020.
    Published • 10.1115/fedsm2020-20291
  13. M. Moein-Jahromi; M.J. Kermani; M. Abdollahzadeh. Corresponding author: M. Moein-Jahromi. "CFD electrochemical modeling of the cathode electrode of PEM fuel cell". Paper presented in 28th Annual Conference of Mechanical Engineering, Tehran, 2020.
    Published
  14. N. M. Delgado; R. A. R. Monteiro; M. Abdollahzadeh; P. Ribeirinha; J. Sousa; A. Mendes. "Mass transport in vanadium redox flow battery – a theoretical case study". Paper presented in HYCELTEC 2019, Barcelona, 2019.
  15. Famouri, M.; Abdollahzadeh, M.M.; Abdulshaheed, A.; Huang, G.; Carbajal, G.; Li, C.; Mehdi Famouri; et al. "Transient Analysis of a Cylindrical Heat Pipe Considering Different Wick Structures". 2016.
    10.1115/HT2016-7469
  16. Abdollahzadeh, M.; Boaventura, M.; Mendes, A.. "Three-dimensional modeling of liquid water transport and CO poisoning in a PEMFC operating on reformate". 2016.
  17. Abdollahzadehsangroudi, Mohammadmahdi; F. Rodrigues; José C. Páscoa; F. Dias; M. Abdollahzadeh; Rodrigues, F.; Páscoa, J.C.; Dias, F.; Abdollahzadeh, M.. "Plasma Actuators for Boundary Layer Control of Next Generation Nozzles". 2015.
    doi:10.1115/IMECE2015-52193
  18. F. Dias; J. Páscoa; C. Xisto; M. Abdollahzadeh; F. Rodrigues. "Simulacao CFD de alhetas de saida com atuadores DBD para a tubeira HOMER". Paper presented in ICEUBI2015 – International Conference on Engineering, Covilha, 2015.
  19. Páscoa, José C.; Rodrigues, Frederico F.; Das, Shyam S.; Abdollahzadeh, M.; Dumas, A.; Trancossi, Michele; Subhash, Maharshi. "Exit Flow Vector Control on a Coanda Nozzle Using Dielectric Barrier Discharge Actuator". 2014.
    10.1115/imece2014-38915
  20. Xisto, Carlos M.; Páscoa, José C.; Abdollahzadeh, M.; Leger, Jakson A.; Schwaiger, Meinhard; Wills, David; Masarati, Pierangelo; Gagon, Louis. "PECyT - Plasma Enhanced Cycloidal Thruster". 2014.
    10.2514/6.2014-3854
  21. M Abdollahzadeh; J Páscoa; PJ Oliveira. "Two dimensional numerical modelling of micro-shock wave creation in nanosecond plasma actuators". Paper presented in FEMTEC 4th International Congress on Computational Engineering and Sciences, Las Vegas, 2013.
  22. M Abdollahzadeh; J Páscoa; PJ Oliveira. "Two dimensional numerical Modeling of nanosecond plasma Actuators, a preliminary study of application in propulsion systems". Paper presented in EUCASS 2013 5th European Conference for Aeronautics and Space Sciences, Munich, 2013.
  23. Abdollahzadehsangroudi, Mohammadmahdi. "Numerical modeling of boundary layer control using dielectric barrier discharge". Paper presented in MEFTE IV Conferencia Nacional em Mecanica de Fluidos, Termodinamica e Energia, 2012.
    Published
  24. Abdollahzadeh, M.; P{\'a}scoa, J.; Oliveira, P.J.; Páscoa, J.. "Numerical investigation on efficiency increase in high altitude propulsion systems using Plasma actuators". 2012.
  25. M. Abdollahzadeh; A.A. Ranjbar; Q. Esmaili; M. Shateri. "Quasi Two Dimensional (1D+1D) modeling of two Phase Flow in PEM Fuel (in Persian)". Paper presented in 19th Annual Conference on Mechanical Engineering (ISME2011), Birjand, 2011.
  26. M. Abdollahzadeh; A.A. Ranjbar; Q. Esmaili; M. Shateri. "Quasi Two Dimensional Modeling of Multi-Component Two Phase Flow in PEM Fuel Cathode ( in Persian)". Paper presented in the First Annual Clean Energy Conference on International Center for Science and High Technology & Environmental Sciences, Kerman, 2010.
    Published
  27. M. Barzegar; M. Hosseinalipoor; M. Abdollahzadeh. "Numerical study on Heat Reduction over Blunt Body with Aerodisk/Aerospike". Paper presented in 12th Conference on Fluid Dynamics, Babol, 2009.
  28. M. Hosseinalipoor; M. Barzegar; M. Abdollahzadeh. "Numerical Modeling of Hypersonic Flow over Large Angle Blunt Cone with Aerospike at Mach 5.75". Paper presented in 8th Conference of Iranian Aerospace Society, shahinshahr, 2009.
Journal article
  1. Alireza Mohammadi; Farid Dolati; Faridoddin Hassani; José Carlos Páscoa; Mohammadmahdi Abdollahzadehsangroudi. "Numerical analysis and optimization of heat transfer enhancement on a flat plate by an EHD jet". International Journal of Heat and Mass Transfer (2023): https://doi.org/10.1016/j.ijheatmasstransfer.2023.124707.
    10.1016/j.ijheatmasstransfer.2023.124707
  2. Sepideh Khasareh; Fatemeh Bagherighajari; F. Dolati; Javad Mahmoudimehr; J.C. Pascoa; M. Abdollahzadeh. "Control of the flame and flow characteristics of a non-premixed bluff body burner using dielectric barrier discharge plasma actuators". Applied Thermal Engineering 235 (2023): 121432-121432. http://dx.doi.org/10.1016/j.applthermaleng.2023.121432.
    10.1016/j.applthermaleng.2023.121432
  3. Diogo Loureiro Martinho; Torsten Berning; Mohammadmahdi Abdollahzadehsangroudi; Anders Rønne Rasmussen; Jakob Hærvig; Samuel Simon Araya. "A Three-Dimensional, Multiphysics Model of An Alkaline Electrolyzer". ECS Transactions 112 4 (2023): 433-447. https://doi.org/10.1149%2F11204.0433ecst.
    10.1149/11204.0433ecst
  4. Fatemeh Bagherighajari; Abbas Moradi Bilondi; Mohammadmahdi Abdollahzadehsangroudi; Ali Hamrang; José Carlos Páscoa. "A parametric numerical study on the performance of polymer electrolyte membrane fuel cell with intermediate-blocked interdigitated flow field designs". Fuel Cells (2023): https://doi.org/10.1002/fuce.202200188.
    10.1002/fuce.202200188
  5. Sepideh Khasare; Fatemeh Bagherighajari; Farid Dolati; Javad Mahmoudimehr; José Páscoa; Mohammadmahdi Abdollahzadehsangroudi. "The effect of the dielectric barrier discharge plasma actuator in the control of non-reactive flow in a non-premixed bluff body burner". Physics of Fluids (2023): https://doi.org/10.1063/5.0157976.
    10.1063/5.0157976
  6. A. Hamrang; M. Abdollahzadeh; A. Moradi Bilondi; F. Bagherighajari; S.M. Rahgoshay; J.C. Pascoa. Corresponding author: M. Abdollahzadeh. "Comparison of PEMFC performance with parallel serpentine and parallel serpentine-baffled flow fields under various operating and geometrical conditions; a parametric study". International Journal of Hydrogen Energy (2023): https://doi.org/10.1016/j.ijhydene.2022.11.122.
    10.1016/j.ijhydene.2022.11.122
  7. Abbas Moradi Bilondi; Fatemeh Bagherighajari; M. Abdollahzadeh; Mohammad Jafar Kermani; José Carlos Páscoa. Corresponding author: M. Abdollahzadeh. "The Role of Porous Carbon Inserts on the Performance of Polymer Electrolyte Membrane Fuel Cells: A Parametric Numerical Study". Energy Technology (2022): https://doi.org/10.1002/ente.202200966.
    Open access • Published • 10.1002/ente.202200966
  8. Fatemeh Bagherighajari; M. Abdollahzadeh; Mehdi Esmaeilpour; Farid Dolati; José Páscoa. Corresponding author: M. Abdollahzadeh. "Novel converging–diverging microchannel heat sink with porous fins for combined thermo-hydraulic performance". Physics of Fluids (2022): https://doi.org/10.1063/5.0118700.
    Open access • Published • 10.1063/5.0118700
  9. Fatemeh Bagherighajari; Abbas Ramiar; M. Abdollahzadeh; José Carlos Páscoa; Paulo J. Oliveira. "Numerical simulation of the polymer electrolyte membrane fuel cells with intermediate blocked interdigitated flow fields". International Journal of Energy Research (2022): https://doi.org/10.1002/er.8233.
    10.1002/er.8233
  10. Hamrang, A.; M. Abdollahzadeh; Kermani, M.J.; Rahgoshay, S.M.. Corresponding author: M. Abdollahzadeh. "Numerical simulation of the PEM fuel cell performance enhancement by various blockage arrangement of the cathode serpentine gas flow channel outlets/inlets". International Journal of Heat and Mass Transfer 186 (2022): 122475. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2021.122475.
    10.1016/j.ijheatmasstransfer.2021.122475
  11. Abdollahzadeh, M.; Rodrigues, F.; Nunes-Pereira, J.; Pascoa, J.C.; Pires, L.. "Parametric optimization of surface dielectric barrier discharge actuators for ice sensing application". Sensors and Actuators A: Physical 335 (2022): 113391. http://dx.doi.org/10.1016/j.sna.2022.113391.
    10.1016/j.sna.2022.113391
  12. Frederico Rodrigues; Mohammadmahdi Abdollahzadehsangroudi; João Nunes-Pereira; José Páscoa. "Recent Developments on Dielectric Barrier Discharge (DBD) Plasma Actuators for Icing Mitigation". Actuators 12 1 (2022): 5-5. https://doi.org/10.3390%2Fact12010005.
    10.3390/act12010005
  13. João Nunes-Pereira; Frederico Freire Rodrigues; Mohammadmahdi Abdollahzadehsangroudi; José Carlos Páscoa; Senentxu Lanceros-Mendez. "Improved performance of polyimide Cirlex-based dielectric barrier discharge plasma actuators for flow control". Polymers for Advanced Technologies (2021): https://doi.org/10.1002/pat.5600.
    10.1002/pat.5600
  14. Delgado, Nuno M.; Monteiro, Ricardo; Abdollahzadeh, M.; Ribeirinha, Paulo; Bentien, Anders; Mendes, Adélio; Nuno Delgado; et al. "2D-dynamic phenomenological modelling of vanadium redox flow batteries – Analysis of the mass transport related overpotentials". Journal of Power Sources 480 (2020): 229142. http://dx.doi.org/10.1016/j.jpowsour.2020.229142.
    10.1016/j.jpowsour.2020.229142
  15. M. Abdollahzadeh; F. Rodrigues; J.C. Pascoa. Corresponding author: M. Abdollahzadeh. "Simultaneous ice detection and removal based on dielectric barrier discharge actuators". Sensors and Actuators A: Physical 315 (2020): 112361-112361. https://doi.org/10.1016%2Fj.sna.2020.112361.
    10.1016/j.sna.2020.112361
  16. Rodrigues, F.; M. Abdollahzadeh; Pascoa, J. C.; Oliveira, P. J.. Corresponding author: M. Abdollahzadeh. "An Experimental Study on Segmented-Encapsulated Electrode Dielectric-Barrier-Discharge Plasma Actuator for Mapping Ice Formation on a Surface: A Conceptual Analysis". Journal of Heat Transfer 143 1 (2020): http://dx.doi.org/10.1115/1.4048252.
    10.1115/1.4048252
  17. Amanifard, N.; M. Abdollahzadeh; Moayedi, H.; Pascoa, J.C.. Corresponding author: Amanifard, N.. "An explicit CFD model for the DBD plasma actuators using wall-jet similarity approach". Journal of Electrostatics 107 (2020): 103497. http://dx.doi.org/10.1016/j.elstat.2020.103497.
    10.1016/j.elstat.2020.103497
  18. Abdollahzadehsangroudi, Mohammadmahdi. "Investigation of the Effect of Anode Fuel Contaminants on the Performance of Polymer Electrolyte Membrane Fuel Cell". Amirkabir Journal of Mechanical Engineering 52 2 (2019): https://mej.aut.ac.ir/article_2818.html.
  19. Abdollahzadehsangroudi, Mohammadmahdi. "A Parametric Investigation of Two Phase Flow in the Cathode Side of Polymer Electrolyte Membrane Fuel Cell". Amirkabir Journal of Mechanical Engineering 51 4 (2019): 1-4.
    Published
  20. M. Abdollahzadeh; J.C. Pascoa; P.J. Oliveira. "Comparison of DBD plasma actuators flow control authority in different modes of actuation". Aerospace Science and Technology 78 (2018): 183-196. https://doi.org/10.1016%2Fj.ast.2018.04.013.
    10.1016/j.ast.2018.04.013
  21. A. Ghanbarian; M.J. Kermani; J. Scholta; M. Abdollahzadeh. "Polymer electrolyte membrane fuel cell flow field design criteria – Application to parallel serpentine flow patterns". Energy Conversion and Management 166 (2018): 281-296. https://doi.org/10.1016%2Fj.enconman.2018.04.018.
    10.1016/j.enconman.2018.04.018
  22. M. Abdollahzadeh; P. Ribeirinha; M. Boaventura; A. Mendes; Mohammadmahdi Abdollahzadehsangroudi; Paulo Ribeirinha; Marta Boaventura; Adélio Mendes. "Three-dimensional modeling of PEMFC with contaminated anode fuel". Energy 152 (2018): 939-959. https://doi.org/10.1016%2Fj.energy.2018.03.162.
    10.1016/j.energy.2018.03.162
  23. P. Havaej; M.J. Kermani; M. Abdollahzadeh; H. Heidary; A. Moradi. "A numerical modeling study on the influence of catalyst loading distribution on the performance of Polymer Electrolyte Membrane Fuel Cell". International Journal of Hydrogen Energy 43 21 (2018): 10031-10047. https://doi.org/10.1016%2Fj.ijhydene.2018.04.063.
    10.1016/j.ijhydene.2018.04.063
  24. Ahmad Rezaei Sangtabi; Abas Ramiar; Ali Akbar Ranjbar; M. Abdollahzadeh; Ali Kianifar. "Influence of repetitive laser pulse energy depositions on supersonic flow over a sphere, cone and oblate spheroid". Aerospace Science and Technology 76 (2018): 72-81. https://doi.org/10.1016%2Fj.ast.2018.02.005.
    10.1016/j.ast.2018.02.005
  25. M. Abdollahzadeh; Ali Asghar Sedighi; M. Esmaeilpour. "Boundary Layer and Heat Transfer Analysis in Liquid Film of Nanofluid Over an Unsteady Stretching Sheet". Journal of Nanofluids 7 2 (2018): 371-377. https://doi.org/10.1166%2Fjon.2018.1442.
    10.1166/jon.2018.1442
  26. P. Ribeirinha; M. Abdollahzadeh; A. Pereira; F. Relvas; M. Boaventura; A. Mendes; Paulo Ribeirinha; et al. "High temperature PEM fuel cell integrated with a cellular membrane methanol steam reformer: Experimental and modelling". Applied Energy 215 (2018): 659-669. https://doi.org/10.1016%2Fj.apenergy.2018.02.029.
    10.1016/j.apenergy.2018.02.029
  27. M. Abdollahzadeh; Ali Asghar Sedighi; M. Esmailpour. "Stagnation Point Flow of Nanofluids Towards Stretching Sheet Through a Porous Medium with Heat Generation". Journal of Nanofluids 7 1 (2018): 149-155. https://doi.org/10.1166%2Fjon.2018.1431.
    10.1166/jon.2018.1431
  28. A. Moradi Bilondi; M. Abdollahzadeh; M.J. Kermani; H. Heidary; P. Havaej. "Numerical study of anode side CO contamination effects on PEM fuel cell performance; and mitigation methods". Energy Conversion and Management 177 (2018): 519-534. https://doi.org/10.1016%2Fj.enconman.2018.09.076.
    10.1016/j.enconman.2018.09.076
  29. Navid Zehtabiyan-Rezaie; Amir Arefian; Mohammad J. Kermani; Amir Karimi Noughabi; M. Abdollahzadeh. "Effect of flow field with converging and diverging channels on proton exchange membrane fuel cell performance". Energy Conversion and Management 152 (2017): 31-44. https://doi.org/10.1016%2Fj.enconman.2017.09.009.
    10.1016/j.enconman.2017.09.009
  30. P. Ribeirinha; M. Abdollahzadeh; J.M. Sousa; M. Boaventura; A. Mendes; Paulo Ribeirinha; Abdollahzadeh M.; et al. "Modelling of a high-temperature polymer electrolyte membrane fuel cell integrated with a methanol steam reformer cell". Applied Energy 202 (2017): 6-19. https://doi.org/10.1016%2Fj.apenergy.2017.05.120.
    10.1016/j.apenergy.2017.05.120
  31. M. Abdollahzadeh; M. Esmaeilpour; R. Vizinho; A. Younesi; J.C. Pàscoa. "Assessment of RANS turbulence models for numerical study of laminar-turbulent transition in convection heat transfer". International Journal of Heat and Mass Transfer 115 (2017): 1288-1308. https://doi.org/10.1016%2Fj.ijheatmasstransfer.2017.08.114.
    10.1016/j.ijheatmasstransfer.2017.08.114
  32. Ribeirinha, P.; Abdollahzadeh, M.; Boaventura, M.; Mendes, A.; P. Ribeirinha; M. Abdollahzadeh; M. Boaventura; A. Mendes. "H2 production with low carbon content via MSR in packed bed membrane reactors for high-temperature polymeric electrolyte membrane fuel cell". Applied Energy 188 (2017): 409-419. http://www.scopus.com/inward/record.url?eid=2-s2.0-85006757527&partnerID=MN8TOARS.
    10.1016/j.apenergy.2016.12.015
  33. Abdollahzadeh, M.; Pascoa, J.C.; Oliveira, P.J.; Páscoa, J.C.. "Implementation of the classical plasma-fluid model for simulation of dielectric barrier discharge (DBD) actuators in OpenFOAM". Computers and Fluids 128 (2016): 77-90. http://www.scopus.com/inward/record.url?eid=2-s2.0-84957605506&partnerID=MN8TOARS.
    10.1016/j.compfluid.2016.01.012
  34. Ramiar, A.; Mahmoudi, A.H.; Esmaili, Q.; Abdollahzadeh, M.; A. Ramiar; A. H. Mahmoudi; Q. Esmaili; M. Abdollahzadeh. "Influence of cathode flow pulsation on performance of proton exchange membrane fuel cell with interdigitated gas distributors". Energy 94 (2016): 206-217. http://www.scopus.com/inward/record.url?eid=2-s2.0-84951055537&partnerID=MN8TOARS.
    10.1016/j.energy.2015.10.110
  35. Abdollahzadeh, M.; Esmaeilpour, M.. "Enhancement of phase change material (PCM) based latent heat storage system with nano fluid and wavy surface". International Journal of Heat and Mass Transfer 80 (2015): 376-385. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2014.09.007.
    10.1016/j.ijheatmasstransfer.2014.09.007
  36. Morgado, J.; Abdollahzadeh, M.; Silvestre, M.A.R.; Páscoa, J.C.. "High altitude propeller design and analysis". Aerospace Science and Technology 45 (2015): 398-407. http://www.scopus.com/inward/record.url?eid=2-s2.0-84935012697&partnerID=MN8TOARS.
    10.1108/AEAT-07-2014-0119.R1
  37. Abdollahzadeh, M.; Rodrigues, F.; Pascoa, J.C.; Oliveira, P.J.; M. Abdollahzadeh; F. Rodrigues; J.C. Pascoa; P.J. Oliveira. "Numerical design and analysis of a multi-DBD actuator configuration for the experimental testing of ACHEON nozzle model". Aerospace Science and Technology 41 (2015): 259-273. http://www.scopus.com/inward/record.url?eid=2-s2.0-84921483568&partnerID=MN8TOARS.
    10.1063/1.3580332
  38. Abdollahzadeh, M.; Páscoa, J.C.; Oliveira, P.J.. "Two-dimensional numerical modeling of interaction of micro-shock wave generated by nanosecond plasma actuators and transonic flow". Journal of Computational and Applied Mathematics 270 (2014): 401-416. http://dx.doi.org/10.1016/j.cam.2013.12.030.
    10.1016/j.cam.2013.12.030
  39. Abdollahzadeh, M.; Páscoa, J.C.; Oliveira, P.J.. "Modified split-potential model for modeling the effect of DBD plasma actuators in high altitude flow control". Current Applied Physics 14 8 (2014): 1160-1170. http://dx.doi.org/10.1016/j.cap.2014.05.016.
    10.1016/j.cap.2014.05.016
  40. Das, Shyam; Abdollahzadeh, M.; Pascoa, Jose; Dumas, A.; Trancossi, M.. "Numerical modeling of coanda effect in a novel propulsive system". The International Journal of Multiphysics 8 2 (2014): 181-202. http://dx.doi.org/10.1260/1750-9548.8.2.181.
    10.1260/1750-9548.8.2.181
  41. Abdollahzadeh, M.; Pascoa, J.C.; Ranjbar, A.A.; Esmaili, Q.. "Analysis of PEM (Polymer Electrolyte Membrane) fuel cell cathode two-dimensional modeling". Energy 68 (2014): 478-494. http://dx.doi.org/10.1016/j.energy.2014.01.075.
    10.1016/j.energy.2014.01.075
  42. Esmaili, Q.; Ranjbar, A. A.; Abdollahzadeh, M.. "Numerical Simulation of a Direct Methanol Fuel Cell through a 1D+1D Approach". International Journal of Green Energy 10 2 (2013): 190-204. http://dx.doi.org/10.1080/15435075.2011.647165.
    10.1080/15435075.2011.647165
  43. Abdollahzadeh, M.; Ranjbar, A. A.; Esmaili, Q.; Ranjbar, A.A.. "(1D + 1D) approach mathematical modeling of two phase multicomponent transport flow in PEMFC". Russian Journal of Electrochemistry 48 12 (2012): 1187-1196. http://dx.doi.org/10.1134/s1023193512050023.
    10.1134/s1023193512050023
  44. Esmaeilpour, M.; Abdollahzadeh, M.. "Free convection and entropy generation of nanofluid inside an enclosure with different patterns of vertical wavy walls". International Journal of Thermal Sciences 52 (2012): 127-136. http://dx.doi.org/10.1016/j.ijthermalsci.2011.08.019.
    10.1016/j.ijthermalsci.2011.08.019
  45. Kashani, S.; Ranjbar, A. A.; Abdollahzadeh, M.; Sebti, S.. "Solidification of nano-enhanced phase change material (NEPCM) in a wavy cavity". Heat and Mass Transfer 48 7 (2012): 1155-1166. http://dx.doi.org/10.1007/s00231-012-0965-2.
    10.1007/s00231-012-0965-2
  46. Rahimi, M.; Ranjbar, A.A.; Hosseini, M.J.; Abdollahzadeh, M.. "Natural convection of nanoparticle–water mixture near its density inversion in a rectangular enclosure". International Communications in Heat and Mass Transfer 39 1 (2012): 131-137. http://dx.doi.org/10.1016/j.icheatmasstransfer.2011.09.010.
    10.1016/j.icheatmasstransfer.2011.09.010
  47. BAHRAMI, B SALIM; ABDOLLAHZADEH, H; BERIJANI, I M; GANJI, D D; ABDOLLAHZADEH, M. "Exact travelling solutions for some nonlinear physical models by ( G'/ G)-expansion method". Pramana 77 2 (2011): 263-275. http://dx.doi.org/10.1007/s12043-011-0100-9.
    10.1007/s12043-011-0100-9
  48. M. Hosseini; H. Abdollahzadeh; M. Abdollahzadeh. "Exact Travelling Solutions For The Sixth-order Boussinesq Equation". Journal of Mathematics and Computer Science 02 02 (2011): 376-387. https://doi.org/10.22436%2Fjmcs.002.02.17.
    10.22436/jmcs.002.02.17
  49. Sebti, S.S.; Khalilarya, S.H.; Mirzaee, I.; Hosseinizadeh, S.F.; Kashani, S.; Abdollahzadeh, M.. "A numerical investigation of solidification in horizontal concentric annuli filled with nano-enhanced phase change material (NEPCM)". World Applied Sciences Journal 13 1 (2011): 9-15. http://www.scopus.com/inward/record.url?eid=2-s2.0-84860280722&partnerID=MN8TOARS.
  50. Ganji, D. D.; Abdollahzadeh, M.. "Exact traveling solutions of some nonlinear evolution equation by (G'/G)-expansion method". Journal of Mathematical Physics 50 1 (2009): 013519. http://dx.doi.org/10.1063/1.3052847.
    10.1063/1.3052847
  51. Ganji, D.D.; Abdollahzadeh, M.. "Exact travelling solutions for the Lax’s seventh-order KdV equation by sech method and rational exp-function method". Applied Mathematics and Computation 206 1 (2008): 438-444. http://dx.doi.org/10.1016/j.amc.2008.09.033.
    10.1016/j.amc.2008.09.033
Thesis / Dissertation
  1. Abdollahzadehsangroudi, Mohammadmahdi. "Analysis and development of numerical methodologies for simulation of flow control with dielectric barrier discharge actuators". PhD, Universidade da Beira Interior Centro da Ciências e Tecnologias Mecânicas e Aeroespaciais, 2015. http://hdl.handle.net/10400.6/4238.
  2. "Two Dimensional Numerical Simulations of Different Gas Flow Channels in PEM Fuel Cell". Master, Babol Noshirvani University of Technology, 2011.

Intellectual property

Patent
  1. Abdollahzadehsangroudi, Mohammadmahdi; Jose Carlos PASCOA MARQUES; Frederico Miguel FREIRE RODRIGUES. 2019. "System for ice detection/prevention and flow control based on the impression of sliding plasma actuators with dielectric discharge barrier". United States.
    Pending
  2. Abdollahzadehsangroudi Mohammadmahdi; Pascoa Marques Jose Carlos; Freire Rodrigues Frederico Miguel. 2019. "Ice Detection/protection And Flow Control System Based On Printing Of Dielectric Barrier Discharge Sliding Plasma Actuators". United States.
  3. José Carlos Páscoa Marques; Mohammadmadhi Abdollahzadehsangroudi. 2018. "Sistema Inteligente Para Pás De Turbinas Eólicas Cicloidais De Eixo Vertical, Baseado Em Atuadores A Plasma Deslizantes, Com Descarga Por Barreira Dielétrica, Impressos, E Ainda, Baseado Na Imposição De Um Movimento Harmónico De Alta Frequência Nas Pás, Garantindo O Degelo/anti-gelo E O Controlo Do Seu Escoamento Naquelas.". Portugal.
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2023/04/26 Design and modeling of high performance Fuel cell system for efficient and clean Energy supply Invited talked for the UNITA Universities
The UNITA - Universitas consortium
2022/07/27 Design and modeling of high performance Fuel cell system for efficient and clean Energy supply Invited talked for the Seminars in C-MAST research center
universidade da beira interior (Covilha, Portugal)
2016 Three-dimensional modeling of liquid water transport and CO poisoning in a PEMFC operating on reformate, World Hydrogen Energy Conference (WHEC 2016)
(Zaragoza, Spain)
2013 Two dimensional numerical modelling of micro-shock wave creation in nanosecond plasma actuators FEMTEC 4th International Congress on Computational Engineering and Sciences
(Las Vegas, United States)
2013 Two dimensional numerical Modeling of nanosecond plasma Actuators, a preliminary study of application in propulsion systems EUCASS 2013 5th European Conference for Aeronautics and Space Sciences
(Munich, Germany)
2012 numerical investigation on efficiency increase in high altitude propulsion systems using plasma actuators ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering
(vienna, Austria)
2012 Numerical Modeling of Boundary Layer Control Using Dielectric Barrier Discharge Conferência Nacional em Mecânica dos Fluidos, Termodinâmica e Energia MEFTE 2012,
(lisbon, Portugal)
2011 Quasi Two Dimensional (1D+1D) modeling of two Phase Flow in PEM Fuel 19th Annual Conference on Mechanical Engineering (ISME2011), Faculty of Engineering
Birjand University (Birjand, Iran)
2010 Quasi Two Dimensional Modeling of Multi-Component Two Phase Flow in PEM Fuel Cathode , the First Annual Clean Energy Conference on International Center for Science and High Technology & Environmental Sciences
(Kerman, Iran)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2022/10 - Current Non-equilibrium plasma enhanced flame stabilization for high efficiency low emission combustion
Co-supervisor
 mechanical engineering (PhD)
Universidade da Beira Interior Centro da Ciências e Tecnologias Mecânicas e Aeroespaciais, Portugal
2021 - Current Numerical simulation of vectoring plasma spray using Coanda effect
Co-supervisor
 mechanical engineering (Master)
University of Guilan, Iran
2020 - Current Numerical study of alternating and nanosecond plasma jet operators and their application for flow control at high speeds
Co-supervisor
 mechanical engineering (PhD)
University of Birjand, Iran
2019 - Current Numerical simulation and hydrodynamic optimization of vanadium redox flow battery
Co-supervisor
 mechanical engineering (PhD)
Amirkabir University of Technology, Iran
2022 - 2022 Numerical simulation of surface cooling with plasma actuators
Supervisor
 mechanical engineering (Degree)
University of Guilan, Iran
2022 - 2022 Simulation and performance evaluation of dual throat nozzle with secondary flow injection
Supervisor
 mechanical engineering (Degree)
University of Guilan, Iran
2022 - 2022 Simulation and analysis of the behavior of dual sweeping impinging jets
Supervisor
 mechanical engineering (Degree)
University of Guilan, Iran
2021 - 2022 Numerical investigation of the effects of non-equilibrium plasma actuator on flame stability in bluff body burner
Supervisor
 mechanical engineering (Master)
University of Guilan, Iran
2021 - 2021 Numerical simulation of electrohydrodynamic spray with the presence of Taylor cone-jet
Supervisor
 mechanical engineering (Degree)
University of Guilan, Iran
2021 - 2021 Simulation and investigation of electrical energy generation in wind channels using piezoelectric materials
Supervisor
 mechanical engineering (Degree)
University of Guilan, Iran
2019 - 2021 Numerical study of the use of oscillating DBD plasma actuator to increase the heat transfer coefficient after a back step in a two-dimensional rectangular channel in laminar mode
Co-supervisor
 Mechanical Engineering (Master)
University of Guilan, Iran
2019 - 2021 Numerical Simulation of PEM fuel cell with mid-baffle interdigitated flow fields
Supervisor
 Mechanical Engineering (Master)
Mazandaran University of Science and Technology, Iran
2019 - 2021 Numerical simulation of the PEM fuel cell performance enhancement by various blockage arrangement of the cathode serpentine gas flow channel outlets
Co-supervisor
 Mechanical Engineering (Master)
University of Guilan, Iran
2020 - 2020 Simulation and investigation of thermal treatment in dipping process stage for tire materials reinforcements
Supervisor
 mechanical engineering (Degree)
University of Guilan, Iran
2020 - 2020 Investigation and simulation of the operation of plasma active flow control actuators
Supervisor
 mechanical engineering (Degree)
University of Guilan, Iran
2020 - 2020 Vertical axis wind turbines - an overview of the various configuration and design principles
Supervisor
 mechanical engineering (Degree)
University of Guilan, Iran
2020 - 2020 a review of Electro-active polymer (EAP) ‘dimple’ actuators for flow control
Supervisor
 mechanical engineering (Degree)
University of Guilan, Iran
2020 - 2020 Analytical modeling of vanadium redox flow batteries
Supervisor
 mechanical engineering (Degree)
University of Guilan, Iran
2019 - 2019 Ice control systems
Supervisor
 mechanical engineering (Degree)
University of Guilan, Iran
2019 - 2019 a review on surface ice detection sensors used in aerospace industry
Supervisor
 mechanical engineering (Degree)
University of Guilan, Iran
2019 - 2019 a review of all vanadium flow batteries as a new solution for energy storage
Supervisor
 mechanical engineering (Degree)
University of Guilan, Iran
2016 - 2018 Development of PEM cathodic catalyst layer chemical degradation model under different operating conditions based on effective structural parameters
Co-supervisor
 Mechanical Engineering (PhD)
Amirkabir University of Technology, Iran
2015 - 2016 Development of a novel all Mach number compressible flow solver
Co-supervisor
 mechanical engineering (Master)
Babol Noshirvani University of Technology, Iran
2015 - 2016 Numerical investigation of heat transfer scenarios in transitional flow regime
Co-supervisor
 Mechanical Enginnering (Master)
Babol Noshirvani University of Technology, Iran

Event participation

Activity description
Type of event 		Event name
Institution / Organization
2016 - 2016 participation in the World Hydrogen Energy Conference (WHEC 2016), At Zaragoza, Spain
Conference
 World Hydrogen Energy Conference (WHEC 2016), At Zaragoza, Spain
2013 - 2013 partcipation in the FEMTEC 4th International Congress on Computational Engineering and Sciences
Conference
 FEMTEC 4th International Congress on Computational Engineering and Sciences
2013 - 2013 partcipation in the EUCASS 2013 5th European Conference for Aeronautics and Space Sciences, At Munich, Germany.
Conference
 EUCASS 2013 5th European Conference for Aeronautics and Space Sciences, At Munich, Germany.
2012 - 2012 participation in the ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering
Conference
 ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering
2012 - 2012 partcipation in the Conferência Nacional em Mecânica dos Fluidos, Termodinâmica e Energia ¬ MEFTE 2012
Conference
 Conferência Nacional em Mecânica dos Fluidos, Termodinâmica e Energia ¬ MEFTE 2012
2011 - 2011 partcipation in the 19th Annual Conference on Mechanical Engineering (ISME2011), Faculty of Engineering, Birjand University, May 2011
Conference
 19th Annual Conference on Mechanical Engineering (ISME2011)
2010 - 2010 partcipation in the the First Annual Clean Energy Conference on International Center for Science and High Technology & Environmental Sciences, Kerman, Iran
Conference
 the First Annual Clean Energy Conference on International Center for Science and High Technology & Environmental Sciences

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2022 Numerical study on the cooling of thermophotovoltaic systems by nanofluids
(Thesis) Main arguer
 Mahdi Mobasher Amini (Master)
University of Guilan, Iran
2022 Numerical Investigation of performance of a hybrid photovoltaic thermal (PVT) -Integrated Thermoelectric (ITE) System
(Thesis) Main arguer
 Sadegh Feyli (Master)
University of Guilan, Iran
2022 Numerical study of the effect of methane hydration on the performance of a solid oxide fuel cell with direct internal reforming
(Thesis) Main arguer
 Samira Yousefi (Master)
University of Guilan, Iran
2022 Thermo-economic analysis of a multi-generation system including organic Rankine cycle, stirling engine and PEM electrolyzer with solar energy as heat source and LNG cold energy
(Thesis) Main arguer
 Samira Mehri Shirkade (Master)
University of Guilan, Iran
2022 Numerical study of the effect of superheaters geometry of fire tube boiler on heat transfer coefficient to surface reduction
(Thesis) Main arguer
 Saeed Yari Karim (Master)
University of Guilan, Iran
2022 Numerical study on the temperature distribution of combustion products in different parts of the fire-tube boiler in order to control the temperature and optimize the burner capacity
(Thesis) Arguer
 Mahtab Askari (Master)
University of Guilan, Iran
2022 Multi-objective optimization of feeding conditions of a SOFC
(Thesis) Main arguer
 Vahid Ebadollhahi (Master)
University of Guilan, Iran
2021 Simulation of heating process of a test room under direct solar radiation in Tehran using radiant wall heating and cooling panels system
(Thesis) Main arguer
 Majid Farahani (Master)
University of Guilan, Iran
2021 : A simulation of moisture in motive steam in a Thermal Vapor Compressor with DPM method
(Thesis) Main arguer
 Moin Hakimi (Master)
University of Guilan, Iran
2021 Simulation of heating process of a test room under direct solar radiation in Tehran using floor heating system
(Thesis) Main arguer
 Ayat Akhavan (Master)
University of Guilan, Iran
2020 Design, construction and performance analysis of a thermal storage system for 5kw capacity
(Thesis) Main arguer
 Mehran Motiee Bijarpesi (Master)
University of Guilan, Iran
2020 Investigating the convective heat transfer coefficient of nanofluid Couette flow in a nanochannel by molecular dynamics simulation
(Thesis) Main arguer
 Saeed Asadi (Master)
University of Guilan, Iran
2020 Numerical and two-dimensional simulation of fluid flow around a two-degree-of-freedom circular cylinder with respect to induced-flow vibration
(Thesis) Main arguer
 Saeed Jamshidi (Master)
University of Guilan, Iran
2020 Numerical Investigation of the Influence of a Buried Anaerobic Digester’s Geometry on Keeping Mesophilic Condition
(Thesis) Main arguer
 Parastoo Rashidian (Master)
University of Guilan, Iran
2020 Exergoeconomic performance comparison of different configuration of supercritical CO2 brayton cycle with heliostate collector as heat source
(Thesis) Main arguer
 Farzam Asadi (Master)
University of Guilan, Iran
2020 Numerical analysis of using plasma actuator as a pump in a two-dimensional channel
(Thesis) Main arguer
 Farinoosh Shojaee Fashtami (Master)
University of Guilan, Iran
2020 Numerical investigation of electrohydrodynamic actuator effect on flow and temperature fields through a tube
(Thesis) Main arguer
 Mehran Shahbazi (Master)
University of Guilan, Iran
2019 Numerical investigation of collector electrodes effect in a electrohydrodynamic pump and present a design model
(Thesis) Main arguer
 Babak Azizi Chamachaz (Master)
University of Guilan, Iran
2019 Numerical investigation of the use of the plasma actuator as vortex generator in smooth channel to control the heat transfer rate
(Thesis) Main arguer
 Seyed Samaneh Miri Jafroudi (Master)
University of Guilan, Iran
2019 Numerical investigation and laser-based method for measuring the viscosity of metals with the inverse measurement method
(Thesis) Main arguer
 Mohammad Zarbini seydani (Master)
University of Guilan, Iran

Ad Hoc journal article review

Journal title (ISSN) Publisher
2023 - Current Journal of the European Ceramic Society (0955-2219) Elsevier
2022 - Current Energy (0360-5442) Elsevier
2022 - Current Journal of Energy Engineering (0733-9402) ASCE
2022 - Current Actuators (2076-0825) MDPI
2022 - Current Chemical papers (0366-6352) Springer
2022 - Current Computing in Science and Engineering (1521-9615) IEE
2022 - Current Material science and engineering B (0921-5107) Elsevier
2022 - Current Physics of fluids (1070-6631) AIP
2022 - Current Alexandria Engineering Journal (2090-2670) Elsevier
2022 - Current Waves in Random and Complex Media (1745-5049) Taylor & Francis
2022 - Current International Journal of Thermofluids (2666-2027) Elsevier
2022 - Current Acta Astronautica (1879-2030) Elsevier
2021/06/07 - Current Aerospace Science and Technology (1270-9638) Elsevier
2021/03/27 - Current AIAA Journal (1533-385X) AMER INST AERONAUTICS ASTRONAUTICS
2021/03/21 - Current Journal of Electrostatics ( 0304-3886) Elsevier
2021 - Current Journal of Power Sources (0378-7753) Elsevier
2020/10/27 - Current Journal of Hydrodynamics (1001-6058) Springer
2019/12/05 - Current chemical engineering & Technology (1521-4125) John Wiley & Sons Ltd
2019/08/27 - Current Journal of Aerospace Engineering (0893-1321) ASCE
2019/08/01 - Current International Journal of Heat and Fluid Flow (0142-727X) Elsevier
2019/05/09 - Current Science of the Total Environment ( 0048-9697) Elsevier
2019 - Current Energies (1996-1073) MDPI
2018/12/29 - Current Energy Conversion and Management (0196-8904) Elsevier
2018/11/17 - Current Journal of Energy Storage (2352-152X) Elsevier
2018/10/30 - Current Renewable Energy (0960-1481) Elsevier
2018/08/28 - Current International Journal for Numerical Methods in Fluids (1097-0363) John Wiley & Sons Ltd
2018/08/24 - Current International Journal of Numerical Methods for Heat & Fluid Flow (0961-5539) Emerald Publishing Limited
2017/12/09 - Current Applied Energy (0306-2619) Elsevier
2017/05/26 - Current Plasma Science and Technology (1009-0630) IOP
2017 - Current Sensors and Actuators A: Physical (0924-4247) Elsevier
2016/07/08 - Current Solar Energy (0038-092X) Elsevier
2016/03/28 - Current Plasma Sources Science and Technology (0963-0252) IOP
2016 - Current Energy Science and Technology, an international Journal (2215-0986) Elsevier
2015/12/14 - Current Energy and Buildings (0378-7788) Elsevier
2015/05/15 - Current Propulsion and Power Research (2212-540X) Elsevier
2015 - Current Polymer Composites (1548-0569) John Wiley & Sons Ltd
2014/07/29 - Current International journal of heat and mass transfer (0017-9310) Elsevier
2014/07/14 - Current Journal of Mechanical Science and Technology (1738-494X) Springer
2014/07/12 - Current International Journal of Energy Research (1099-114X) https://onlinelibrary.wiley.com/journal/1099114x
2014/06/03 - Current Applied Thermal Engineering (1359-4311) Elsevier
2014 - Current International Journal of Green Energy (1543-5075) Taylor & Francis
2014 - Current International Journal of aerospace engineering (1687-5966) Hindawi
2012/09/26 - Current Applied Mathematical Modelling (0307-904X) Elsevier

Association member

Society Organization name Role
2023/12/01 - Current CA22151 - Cyber-Physical systems and digital twins for the decarbonisation of energy-intensive industries (CYPHER) Member of Working Groups
2016 - Current C-MAST | Center for Mechanical and Aerospace Science and Technologies at Faculdade de Engenharia of universidade da Beira Interior, Portugal Member
2014/11 - 2016/06/30 LEPABE - Laboratório de Engenharia de Processos, Ambiente, Biotecnologia e Energia at University of Porto Member

Conference scientific committee

Conference name Conference host
2022/11 - Current International congress on Engineering (ICEUBI2022) universidade da Beira Interior

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2023/09 - 2024/02 Turbomáquinas Engenharia Eletromecânica (Mestrado integrado) Universidade da Beira Interior, Portugal
2022/02 - 2022/06 Direct Energy Conversion mechanical engineering (Master) University of Guilan, Iran
2021/09 - 2022/01 Fluid Mechanics II mechanical engineering (Bachelor) University of Guilan, Iran
2021/02 - 2021/07 An Introduction to Computational Fluid dynamics mechanical engineering (Bachelor) University of Guilan, Iran
2020/09 - 2021/02 Numerical Analysis mechanical engineering (Bachelor) University of Guilan, Iran
2018/09 - 2019/01 Fluid Mechanics I mechanical engineering (Bachelor) University of Guilan, Iran
2018/09 - 2019/01 Advanced Engineering Mathematics mechanical engineering (Master) University of Guilan, Iran
2018/02 - 2018/06 Heat Transfer I Mechanical Engineering (Bachelor) Mazandaran University of Science and Technology, Iran
2017/09 - 2018/01 Heat Transfer I Mechanical Engineering (Bachelor) Mazandaran University of Science and Technology, Iran
2009/09 - 2011/07 Fluid Mechanics Laboratory mechanical engineering (Bachelor) Babol Noshirvani University of Technology, Iran
2009/09 - 2010/07 Heat Transfer Laboratory (Teaching assistant ) Mechanical Engineering (Bachelor) Babol Noshirvani University of Technology, Iran

Journal scientific committee

Journal title (ISSN) Publisher
2023 - Current actuators (2076-0825) MDPI
2022/09 - Current International Journal of Energy research (1099-114X) Hindawi
2020 - Current Fluids (2311-5521) MDPI
2020 - Current International Journal of Renewable Energy Technology (1757-3971) inderscience
2020 - 2022/02 Energies (1996-1073) MDPI

Other jury / evaluation

Activity description Institution / Organization
2020 - 2020 External reviewer for proposals submitted to the 2020 FONDECYT (National Fund for Scientific and Technological Development) Regular Competition for Chilean National Commission for Scientific and Technological Research (CONICYT) Comisión Nacional de Investigación Científica y Tecnológica, Chile
2018 - 2018 Reviewer of book proposal entitled "OpenFOAM for Aeronautical Engineers" for Elsevier company. Elsevier BV, Netherlands
Distinctions

Award

2024 Prémio Jovem Investigador UBI 2023
Universidade da Beira Interior, Portugal
2021 Plasma Science and Technology: 2021 Outstanding Reviewer Awards (https://publishingsupport.iopscience.iop.org/questions/plasma-science-technology-2021-reviewer-awards/)
IOP Publishing Ltd, United Kingdom
2021 Best paper presentation award for the co-authored conference paper titled: " Influence of Exposed Electrode Thickness on Plasma Actuators Performance for Coupled Deicing and Flow Control Applications" and presented at: International Mechanical Engineering

Title

2023 Guest Editor of the special issue " Dielectric Barrier Discharge Plasma Actuators for Thermo-Fluid Dynamics Applications" in "actuators" (ISSN: 2076-0825, Impact Factor=2.523, Publisher: MDPI).
MDPI AG, Switzerland
2022 Academic Editor of "International Journal of Energy research" (ISSN: 1099-114X, Publisher: Hindawi, IF=5.164), since September 2022
Hindawi Limited, United Kingdom
2021 Guest Editor of the special issue "Plasma Discharge for Electrohydrodynamic Active Flow Control and beyond" in "Fluids" (ISSN: 2311-5521, Publisher: MDPI).
MDPI AG, Switzerland
2021 Guest Editor of the special issue " CFD Modeling and Simulation of Fuel Cells " in "Energies" (ISSN 1996-1073, Impact Factor=3.004, Publisher: MDPI).
MDPI AG, Switzerland
2021 Guest Editor of the special issue "Numerical Analysis of Turbulent Flow and Heat Transfer" in "Energies" (ISSN:1996-1073, Impact Factor=3.004, Publisher: MDPI).
MDPI AG, Switzerland
2020 Topic board Member, "Fluids" (ISSN: 2311-5521, Publisher: MDPI), since September 2020
MDPI AG, Switzerland
2020 Editorial Board member in International Journal of Renewable Energy Technology (ISSN:1757-3971). Since July 2020.
Inderscience Publishers, Switzerland

Other distinction

2023 Stimulus of Scientific Employment Individual grant (Auxiliar researcher)
Fundação para a Ciência e a Tecnologia, Portugal
2018 Stimulus of Scientific Employment Individual grant (Junior Researcher)
Fundação para a Ciência e a Tecnologia, Portugal
2016 Post-Doctoral Scholarship within FCT Project UNDULANT-Next
Universidade da Beira Interior Centro da Ciências e Tecnologias Mecânicas e Aeroespaciais, Portugal
2015 Post-Doctoral Scholarship within EU Project FluidCell
Universidade do Porto Laboratorio de Engenharia de Processos Ambiente Biotecnologia e Energia, Portugal
2011 Ranked 1st in MSc Degree with GPA=18.68/20 in class of 22 students (School of Mechanical in Engineering, Thermofluids Mechanics department, Babol, Iran).
Babol Noshirvani University of Technology, Iran
2011 PhD Scholarship within the EU project MAAT
Universidade da Beira Interior Centro da Ciências e Tecnologias Mecânicas e Aeroespaciais, Portugal
2008 Ranked 1st in BSc Degree with GPA=16.38/20 in class of 68 students (School of Mechanical in Engineering, Thermofluids Mechanics department, Babol, Iran)
Babol Noshirvani University of Technology, Iran