???global.info.a_carregar???
Identificação

Identificação pessoal

Nome completo
Manuel José Moreira de Freitas

Nomes de citação

  • Freitas, Manuel

Identificadores de autor

Ciência ID
2915-6FCE-F328
ORCID iD
0000-0003-3525-9218
Formação
Grau Classificação
1978/09/01 - 1982/06/30
Concluído
 En (Docteur)
Universite de Technologie de Compiegne - Centre Benjamin Franklin, França
"Amorçage de fissures autour des inclusions dans les aciers de roulement" (TESE/DISSERTAÇÃO)
1967/09/01 - 1972/10/31
Concluído
 Engenharia Mecânica (Mestrado integrado)
Especialização em Produção
Universidade de Lisboa Instituto Superior Técnico, Portugal
 14
Percurso profissional

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento 		Empregador
2015/01/01 - Atual Professor Catedrático (Docente Universitário) Atlântica Escola Universitária de Ciências Empresariais Saúde Tecnologias e Engenharia, Portugal
2015 - 2019 Professor Catedrático (Docente Universitário) Atlântica Escola Universitária de Ciências Empresariais Saúde Tecnologias e Engenharia, Portugal
1974/11/01 - 2013/07/31 Professor Catedrático (Docente Universitário) Universidade de Lisboa Instituto Superior Técnico, Portugal

Cargos e Funções

Categoria Profissional
Instituição de acolhimento 		Empregador
2020/09/01 - 2026/08/31 Reitor Atlântica, Instituto Universitário, Portugal
Atlântica, Instituto Universitário, Portugal
2017 - 2019 Conselho científico/técnico-científico ou orgão correspondente Atlântica Escola Universitária de Ciências Empresariais Saúde Tecnologias e Engenharia, Portugal
2017 - 2019 Diretor ou presidente da unidade orgânica Atlântica Escola Universitária de Ciências Empresariais Saúde Tecnologias e Engenharia, Portugal
2017 - 2019 Presidente Atlântica Escola Universitária de Ciências Empresariais Saúde Tecnologias e Engenharia, Portugal
2016 - 2017 Coordenação ou direção de centro de investigação, departamento ou equivalente Atlântica Escola Universitária de Ciências Empresariais Saúde Tecnologias e Engenharia, Portugal
2015 - 2017 Vice-Reitor Atlântica Escola Universitária de Ciências Empresariais Saúde Tecnologias e Engenharia, Portugal
Projetos

Projeto

Designação Financiadores
2021/03/01 - 2024/02/29 Comportamento à Fadiga de Longa Duração de Ligas Metálicas de Engenharia
PTDC/EME-EME/7678/2020
Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal

Instituto de Engenharia Mecânica, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2016/06/01 - 2019/12/31 Fadiga Multiaxial a Grande Número de Ciclos
PTDC/EMS-PRO/5760/2014
Instituto de Engenharia Mecânica, Portugal

Associated Laboratory for Energy Transports and Aeronautics, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2016/01/01 - 2019/12/31 Introdução de tecnonogias baseadas em materiais avançados nas indústrias da mobilidade.
MITP-TB/PFM/0005/2013
Associated Laboratory for Energy Transports and Aeronautics, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal

Universidade do Minho, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2014/06/01 - 2018/11/30 Dinamicas de inovação em aeronautica e na Embraer em Évora: uma plataforma distributiva para iniciativas empresariais, emprego e desenvolvimento de capacidades
CMUP-ERI/TPE/0011/2013
Universidade de Lisboa Centro de Estudos em Inovação Tecnologia e Políticas de Desenvolvimento, Portugal

Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal

Instituto de Engenharia de Sistemas e Computadores, Portugal

Instituto de Engenharia Mecânica, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2012/03/21 - 2015/07/31 NiTi-Fail - Avaliação do risco de fractura em limas endodônticas de Ni-Ti durante o seu uso clínico
PTDC/EME-PME/122795/2010
Universidade de Lisboa Instituto Superior Técnico, Portugal

Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal

Universidade Nova de Lisboa Faculdade de Ciências e Tecnologia, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2010/03/01 - 2013/08/31 Deformação e determinação da vida à fadiga através de um novo sistema de ensaio biaxial
PTDC/EME-PME/102860/2008
Universidade de Lisboa Instituto Superior Técnico, Portugal

Instituto Politécnico de Setúbal, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2010/03/01 - 2013/08/27 Railways - rolling contact fatigue
PTDC/EME-PME/100204/2008
Instituto de Engenharia Mecânica, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal

Universidade de Coimbra, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2010/03/01 - 2013/06/30 Iniciação e propagação de fissuras sob diferentes condições de carregamento em fadiga multiaxial
PTDC/EME-PME/104404/2008
Universidade de Lisboa Instituto Superior Técnico, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2009/01/01 - 2012/12/31 Amortecimento histerético como parâmetro energético de dano em fadiga de materiais a muito elevada frequência
PTDC/EME-PME/69904/2006
Universidade de Lisboa Instituto Superior Técnico, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2007/12/21 - 2010/12/20 Desenvolvimento de metodologias e ferramentas cooperativas de Eco-design aplicadas na concepção de componentes automóveis: o caso de estudo de materiais compósitos com fibras naturais
PTDC/AMB/67241/2006
Universidade de Lisboa Instituto Superior Técnico, Portugal

Universidade de Lisboa Centro de Estudos em Inovação Tecnologia e Políticas de Desenvolvimento, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2005/04/01 - 2007/06/30 Previsão de vida à fadiga e da potencial trajectória de fenda sob carregamento multiaxial em serviço
POCI/EME/59577/2004
Universidade de Lisboa Instituto Superior Técnico, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
Produções

Publicações

Artigo em conferência
  1. Moreira, R.; Anes, V.; Freitas, M.; Reis, L.. "Evaluation and numerical modeling of phenomenological approach for AZ31B-F magnesium alloy under multiaxial fatigue". 2020.
    10.1016/j.prostr.2020.11.067
  2. da Costa, P.R.; Montalvão, D.; Reis, L.; Freitas, M.. "Modal and strain experimental analysis to an improved axial-axial cruciform specimen for ultrasonic fatigue testing". 2020.
    10.1016/j.prostr.2020.11.062
  3. da Costa, P.R.; Soares, H.; Reis, L.; de Freitas, M.. "Tension/torsion ultrasonic fatigue testing on a railway wheel". 2020.
    10.1016/j.prostr.2020.04.050
  4. Baptista, R.; Infante, V.; Freitas, M.. "An algorithm for fatigue crack growth applied to mixed and biaxial mode loadings". 2019.
    10.1016/j.prostr.2019.08.073
  5. Soares, H.; Anes, V.; Freitas, M.; Reis, L.. "Fatigue life of a railway wheel under uniaxial and multiaxial loadings". 2018.
    10.1016/j.prostr.2018.12.362
  6. Soares, H.; Costa, P.; Freitas, M.; Reis, L.. "Fatigue life assessment of a railway wheel material under HCF and VHCF conditions". 2018.
    10.1051/matecconf/201816509003
  7. Baptista, R.; Claudio, R.A.; Reis, L.; Madeira, J.F.A.; Freitas, M.. "Optimal Cruciform Specimen Design Using the Direct Multi-search Method and Design Variable Influence Study". 2017.
    10.1016/j.prostr.2017.07.037
  8. Fonte, M.; Infante, V.; Freitas, M.; Reis, L.. "Failure mode analysis of two diesel engine crankshafts". 2016.
    10.1016/j.prostr.2016.02.042
  9. Baptista, R.; Cláudio, R.A.; Reis, L.; Madeira, J.F.A.; Freitas, M.. "Numerical study of fatigue crack initiation and propagation on optimally designed cruciform specimens". 2016.
    10.1016/j.prostr.2016.02.014
  10. Soares, H.; Zucarelli, T.; Vieira, M.; Freitas, M.; Reis, L.. "Experimental characterization of the mechanical properties of railway wheels manufactured using class B material". 2016.
    10.1016/j.prostr.2016.02.036
  11. Anes, V.; Pedro, R.S.; Henriques, E.; Freitas, M.; Reis, L.. "Galvanic corrosion of aircraft bonded joints as a result of adhesive microcracks". 2016.
    10.1016/j.prostr.2016.02.030
  12. Videira, H.; Anes, V.; Freitas, M.; Reis, L.. "Characterization and evaluation of the mechanical behaviour of the magnesium alloy AZ31B in multiaxial fatigue in the presence of a notch". 2016.
    10.1016/j.prostr.2016.02.027
  13. Carvalho, A.; Freitas, M.; Reis, L.; Montalvão, D.; Fonte, M.. "Rotary Fatigue Testing to Determine the Fatigue Life of NiTi alloy Wires: An Experimental and Numerical Analisys". 2016.
    10.1016/j.prostr.2016.02.006
  14. Vieira, M.; Reis, L.; De Freitas, M.; Ribeiro, A.. "Preliminary evaluation of the loading characteristics of biaxial tests at low and very high frequencies". 2016.
    10.1016/j.prostr.2016.02.028
  15. Carvalho, A.; Freitas, M.; Reis, L.; Montalvao, D.; Fonte, M.. "Rotary Fatigue Testing Machine to Determine the Fatigue Life of NiTi alloy Wires and Endondontic Files". 2015.
    10.1016/j.proeng.2015.08.098
  16. Anes, V.; Reis, L.; Freitas, M.. "Asynchronous multiaxial fatigue damage evaluation". 2015.
    10.1016/j.proeng.2015.02.051
  17. Anes, V.; Reis, L.; Freitas, M.. "Multiaxial fatigue damage accumulation under variable amplitude loading conditions". 2015.
    10.1016/j.proeng.2015.02.016
  18. Freitas, M.; Reis, L.; Li, B.; Guelho, I.; Antunes, V.; Maia, J.; Cláudio, R.A.. "In-plane biaxial fatigue testing machine powered by linear iron-core motors". 2014.
    10.1520/STP157120130078
  19. Reis, L.; Infante, V.; De Freitas, M.; Duarte, F.F.; Moreira, P.M.G.; De Castro, P.M.S.T.. "Fatigue behaviour of aluminium lap joints produced by laser beam and friction stir welding". 2014.
    10.1016/j.proeng.2014.06.265
  20. Lage, Y.; Ribeiro, A.M.R.; Montalvão, D.; Reis, L.; Freitas, M.. "Automation in strain and temperature control on VHCF with an ultrasonic testing facility". 2014.
    10.1520/STP157120130079
  21. Reis, L.; Anes, V.; Li, B.; De Freitas, M.. "Damage accumulation due to sequential loading effect". 2011.
    10.1016/j.proeng.2011.04.232
  22. Santos, T.; Vilaça, P.; Reis, L.; Quintino, L.; De Freitas, M.. "Advances in NDT techniques for friction stir welding joints of AA2024". 2008.
  23. Da Silva, C.A.; Ferrão, P.M.C.; Freitas, M.; Rodrigues, L.; Alves, D.E.. "Using Life Cycle Assessment on environmental management projects: A case study of a Brazilian vehicle development". 2008.
    10.1109/IEMCE.2008.4618015
  24. Fonseca, A.; Reis, L.; Freitas, M.. "Assessing the structural integrity of poaf aircraft". 2006.
  25. Romeiro, F.; De Freitas, M.; Pommier, S.. "Effect of overloads and underloads on fatigue crack growth and interaction effects". 2003.
  26. Li, B.; de Freitas, M.. "A procedure for fast evaluation of high-cycle fatigue under multiaxial random loading". 2001.
    10.1115/DETC2001/RSAFP-21742
  27. Li, B.; De Freitas, M.. "A procedure for fast evaluation of high-cycle fatigue under multiaxial random loading". 2001.
  28. De Freitas, M.; Li, B.; Santos, J.L.T.. "A numerical approach for high-cycle fatigue life prediction with multiaxial loading". 2000.
  29. Romeiro, F.F.J.; Domingos, C.A.; De Freitas, M.J.M.. "Measurement of fatigue crack closure for negative stress ratio". 1999.
  30. Travassos, Joao Manuel Candeias; de Freitas, Manuel Jose Moreira. "Finishing systems of aluminum on the adhesion of encapsulated inserts on epoxy composite structures". 1996.
  31. Fonte, M.A.; de Freitas, M.M.. "Fatigue crack growth of semi-elliptical cracks under bending combined with steady torsion". 1996.
  32. Freitas, M.; Francois, D.. "LIFE ASSESSMENT OF INITIATION FATIGUE CRACKS AROUND INCLUSIONS IN ROLLING FATIGUE.". 1984.
  33. Freitas, Manuel; Francois, Dominique. "INITIATION OF FATIGUE CRACKS AROUND INCLUSIONS IN ROLLING FATIGUE.". 1983.
Artigo em revista
  1. Pedro R. da Costa; Masoud Rahaeifard; Diogo Montalvão; Luís Reis; Manuel Freitas. "A new method for ultrasonic fatigue component frequency modulation: From ultrasonic horn to uniaxial and multiaxial specimens". International Journal of Fatigue 176 (2023): 107887-107887. http://dx.doi.org/10.1016/j.ijfatigue.2023.107887.
    10.1016/j.ijfatigue.2023.107887
  2. Tomás Barros; Bruno Santos; V. Infante; M. Freitas; B. Fernandes; P. Gamboa; A. Moura. "Fatigue failure analysis on the 2nd bulkhead beam of the Portuguese Air Force Epsilon TB-30 aircraft". Engineering Failure Analysis 151 (2023): 107404-107404. http://dx.doi.org/10.1016/j.engfailanal.2023.107404.
    10.1016/j.engfailanal.2023.107404
  3. Pedro R. Costa; Luís Reis; Manuel Freitas. "Very High Cycle Fatigue and Ultrasonic Testing in Multiaxial Loading". Materials Performance and Characterization 12 2 (2023): 20220110-20220110. http://dx.doi.org/10.1520/mpc20220110.
    10.1520/mpc20220110
  4. Vitor Anes; Rogério Moreira; Luís Reis; Manuel Freitas. "Simulation of the Cyclic Stress–Strain Behavior of the Magnesium Alloy AZ31B-F under Multiaxial Loading". Crystals (2023): https://doi.org/10.3390/cryst13060969.
    10.3390/cryst13060969
  5. Vitor Anes; Francisco Bumba; Luís Reis; Manuel Freitas. "Determination of the Relationship between Proportional and Non-Proportional Fatigue Damage in Magnesium Alloy AZ31 BF". Crystals (2023): https://doi.org/10.3390/cryst13040688.
    10.3390/cryst13040688
  6. Pedro R. da Costa; Luís Reis; Manuel Freitas. "Very high cycle fatigue under tension/torsion loading of mold low alloy steel". Fatigue & Fracture of Engineering Materials & Structures (2023): https://doi.org/10.1111/ffe.13907.
    10.1111/ffe.13907
  7. Luís Reis; Pedro R. Da Costa; Ricardo Pereira; Diogo Montalvão; Manuel Freitas. "Crack path and fracture surface analysis of ultrasonic fatigue testing under multiaxial loadings". Engineering Failure Analysis 142 (2022): 106785-106785. http://dx.doi.org/10.1016/j.engfailanal.2022.106785.
    10.1016/j.engfailanal.2022.106785
  8. Vitor Anes; Luis Reis; Manuel Freitas. "Effect of Shear/Axial Stress Ratio on Multiaxial Non-Proportional Loading Fatigue Damage on AISI 303 Steel". Metals (2022): https://doi.org/10.3390/met12010089.
    10.3390/met12010089
  9. Costa, P.; Nwawe, R.; Soares, H.; Reis, L.; Freitas, M.; Chen, Y.; Montalvão, D.. "Review of multiaxial testing for very high cycle fatigue: From 'Conventional' to ultrasonic machines". Machines 8 2 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85085895458&partnerID=MN8TOARS.
    10.3390/MACHINES8020025
  10. da Costa, P.R.; Soares, H.; Reis, L.; Freitas, M.. "Ultrasonic fatigue testing under multiaxial loading on a railway steel". International Journal of Fatigue 136 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85082136630&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2020.105581
  11. Sérgio M.O. Tavares; Luis Reis; Manuel Freitas; Paulo M.S.T. Castro. "Mixed mode fatigue and fracture in planar geometries: Observations on K eq and crack path modelling". Fatigue & Fracture of Engineering Materials & Structures 42 11 (2019): 2441-2456. https://doi.org/10.1111/ffe.13093.
    10.1111/ffe.13093
  12. Luís Reis; Manuel Freitas; Paulo M.S.T. Castro. "Guest editorial: Special issue—New trends in fatigue and fracture (NT2F18)". Fatigue & Fracture of Engineering Materials & Structures 42 11 (2019): 2413-2413. https://doi.org/10.1111/ffe.13114.
    10.1111/ffe.13114
  13. Felipe A. Canut; Alda M.P. Simões; Luis Reis; Manuel Freitas; Ivan N. Bastos; Fábio C. Castro; Edgar N. Mamiya. "Monitoring of corrosion-fatigue degradation of grade R4 steel using an electrochemical-mechanical combined approach". Fatigue & Fracture of Engineering Materials & Structures 42 11 (2019): 2509-2519. https://doi.org/10.1111/ffe.13079.
    10.1111/ffe.13079
  14. Fonte, M.; Freitas, M.; Reis, L.. "Failure analysis of a damaged diesel motor crankshaft". Engineering Failure Analysis 102 (2019): 1-6. http://www.scopus.com/inward/record.url?eid=2-s2.0-85064273248&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2019.04.025
  15. Infante, V.; Freitas, M.. "Failure analysis of compressor blades of a helicopter engine". Engineering Failure Analysis 104 (2019): 67-74. http://www.scopus.com/inward/record.url?eid=2-s2.0-85066495480&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2019.05.024
  16. Anes, V.; Reis, L.; de Freitas, M.. "Evaluation of a phenomenological elastic-plastic approach for magnesium alloys under multiaxial loading conditions". Fatigue and Fracture of Engineering Materials and Structures 42 11 (2019): 2468-2486. http://www.scopus.com/inward/record.url?eid=2-s2.0-85065413480&partnerID=MN8TOARS.
    10.1111/ffe.13025
  17. Costa, P.R.; Montalvão, D.; Freitas, M.; Baxter, R.; Reis, L.. "Cruciform specimens' experimental analysis in ultrasonic fatigue testing". Fatigue and Fracture of Engineering Materials and Structures 42 11 (2019): 2496-2508. http://www.scopus.com/inward/record.url?eid=2-s2.0-85066839018&partnerID=MN8TOARS.
    10.1111/ffe.13041
  18. Freitas, M.; Infante, V.; Baptista, R.. "Failure analysis of the nose landing gear axle of an aircraft". Engineering Failure Analysis 101 (2019): 113-120. http://www.scopus.com/inward/record.url?eid=2-s2.0-85063144275&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2019.03.010
  19. Infante, V.; Freitas, M.; Fonte, M.. "Failure analysis of a crankshaft of a helicopter engine". Engineering Failure Analysis 100 (2019): 49-59. http://www.scopus.com/inward/record.url?eid=2-s2.0-85062232044&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2019.01.072
  20. Montalvão, D.; Blaskovics, A.; Costa, P.; Reis, L.; Freitas, M.. "Numerical analysis of VHCF cruciform test specimens with non-unitary biaxiality ratios". International Journal of Computational Methods and Experimental Measurements 7 4 (2019): 327-339. http://www.scopus.com/inward/record.url?eid=2-s2.0-85072659655&partnerID=MN8TOARS.
    10.2495/CMEM-V7-N4-327-339
  21. Pereira, S.; Carvalho, A.; Reis, L.; Freitas, M.; Montalvão, D.. "Characterisation and evaluation of the mechanical behaviour of endodontic-grade NiTi wires". Frattura ed Integrita Strutturale 13 49 (2019): 450-462. http://www.scopus.com/inward/record.url?eid=2-s2.0-85070739538&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.49.43
  22. Soares, B.A.R.; Henriques, E.; Ribeiro, I.; Freitas, M.. "Cost analysis of alternative automated technologies for composite parts production". International Journal of Production Research 57 6 (2019): 1797-1810. http://www.scopus.com/inward/record.url?eid=2-s2.0-85052089411&partnerID=MN8TOARS.
    10.1080/00207543.2018.1508903
  23. Reis, L.; Caxias, J.; Soares, H.; Costa, P.R.; Anes, V.; Freitas, M.. "Damage evaluation under complex fatigue loading conditions". Frattura ed Integrita Strutturale 13 48 (2019): 318-331. http://www.scopus.com/inward/record.url?eid=2-s2.0-85064278574&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.48.31
  24. Fonte, M.; Reis, L.; Infante, V.; Freitas, M.. "Failure analysis of cylinder head studs of a four stroke marine diesel engine". Engineering Failure Analysis 101 (2019): 298-308. http://www.scopus.com/inward/record.url?eid=2-s2.0-85063608072&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2019.03.026
  25. Anes, V.; Henriques, E.; Freitas, M.; Reis, L.. "A new risk prioritization model for failure mode and effects analysis". Quality and Reliability Engineering International 34 4 (2018): 516-528. http://www.scopus.com/inward/record.url?eid=2-s2.0-85040664703&partnerID=MN8TOARS.
    10.1002/qre.2269
  26. Infante, V.; Fernandes, L.; Freitas, M.; Baptista, R.. "Failure analysis of a nose landing gear fork". Engineering Failure Analysis 82 (2017): 554-565. http://www.scopus.com/inward/record.url?eid=2-s2.0-85018393829&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2017.04.020
  27. Fonte, M.; Infante, V.; Reis, L.; Freitas, M.. "Failure mode analysis of a diesel motor crankshaft". Engineering Failure Analysis 82 (2017): 681-686. http://www.scopus.com/inward/record.url?eid=2-s2.0-85020859906&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2017.06.010
  28. Anes, V.; Caxias, J.; Freitas, M.; Reis, L.. "Fatigue damage assessment under random and variable amplitude multiaxial loading conditions in structural steels". International Journal of Fatigue 100 (2017): 591-601. http://www.scopus.com/inward/record.url?eid=2-s2.0-85008157538&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2016.12.009
  29. Costa, P.; Vieira, M.; Reis, L.; Ribeiro, A.; de Freitas, M.. "New specimen and horn design for combined tension and torsion ultrasonic fatigue testing in the very high cycle fatigue regime". International Journal of Fatigue 103 (2017): 248-257. http://www.scopus.com/inward/record.url?eid=2-s2.0-85020667453&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2017.05.022
  30. Anes, V.; de Freitas, M.; Reis, L.. "The damage scale concept and the critical plane approach". Fatigue and Fracture of Engineering Materials and Structures 40 8 (2017): 1240-1250. http://www.scopus.com/inward/record.url?eid=2-s2.0-85021204545&partnerID=MN8TOARS.
    10.1111/ffe.12653
  31. de Freitas, M.. "Multiaxial fatigue: From materials testing to life prediction". Theoretical and Applied Fracture Mechanics 92 (2017): 360-372. http://www.scopus.com/inward/record.url?eid=2-s2.0-85019087235&partnerID=MN8TOARS.
    10.1016/j.tafmec.2017.05.008
  32. de Freitas, M.; Reis, L.; Meggiolaro, M.A.; de Castro, J.T.P.. "Stress scale factor and critical plane models under multiaxial proportional loading histories". Engineering Fracture Mechanics 174 (2017): 104-116. http://www.scopus.com/inward/record.url?eid=2-s2.0-85008475970&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2016.12.016
  33. M. Vieira; L. Reis; M. Freitas; A. Ribeiro. "Strain measurements on specimens subjected to biaxial ultrasonic fatigue testing". Theoretical and Applied Fracture Mechanics 85 (2016): 2-8. https://doi.org/10.1016%2Fj.tafmec.2016.08.007.
    10.1016/j.tafmec.2016.08.007
  34. Infante, V.; Braga, D.F.O.; Duarte, F.; Moreira, P.M.G.; De Freitas, M.; De Castro, P.M.S.T.. "Study of the fatigue behaviour of dissimilar aluminium joints produced by friction stir welding". International Journal of Fatigue 82 (2016): 310-316. http://www.scopus.com/inward/record.url?eid=2-s2.0-84959344964&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2015.06.020
  35. Reis, L.; Fonte, M.; Freitas, M.; Infante, V.. "XV Portuguese Conference on Fracture (XV PCF)". Theoretical and Applied Fracture Mechanics 85 (2016): 1-1. http://www.scopus.com/inward/record.url?eid=2-s2.0-84991269456&partnerID=MN8TOARS.
    10.1016/j.tafmec.2016.09.007
  36. Carvalho, A.; Montalvão, D.; Freitas, M.; Reis, L.; Fonte, M.. "Determination of the rotary fatigue life of NiTi alloy wires". Theoretical and Applied Fracture Mechanics 85 (2016): 37-44. http://www.scopus.com/inward/record.url?eid=2-s2.0-84991277666&partnerID=MN8TOARS.
    10.1016/j.tafmec.2016.08.010
  37. Anes, V.; Pedro, R.; Henriques, E.; Freitas, M.; Reis, L.. "Bonded joints of dissimilar adherends at very low temperatures - An adhesive selection approach". Theoretical and Applied Fracture Mechanics 85 (2016): 99-112. http://www.scopus.com/inward/record.url?eid=2-s2.0-84991228679&partnerID=MN8TOARS.
    10.1016/j.tafmec.2016.08.012
  38. Anes, V.; Lage, Y.E.; Vieira, M.; Maia, N.M.M.; Freitas, M.; Reis, L.. "Torsional and axial damping properties of the AZ31B-F magnesium alloy". Mechanical Systems and Signal Processing 79 (2016): 112-122. http://www.scopus.com/inward/record.url?eid=2-s2.0-84960192608&partnerID=MN8TOARS.
    10.1016/j.ymssp.2016.02.040
  39. Baptista, R.; Cláudio, R.A.; Reis, L.; Madeira, J.F.A.; Freitas, M.. "Numerical study of in-plane biaxial fatigue crack growth with different phase shift angle loadings on optimal specimen geometries". Theoretical and Applied Fracture Mechanics 85 (2016): 16-25. http://www.scopus.com/inward/record.url?eid=2-s2.0-84991228405&partnerID=MN8TOARS.
    10.1016/j.tafmec.2016.08.025
  40. Azevedo, C.R.F.; Infante, V.; de Freitas, M.; Clegg, R.. "The Sixth International Conference on Engineering Failure Analysis - Part 2". Engineering Failure Analysis 61 (2016): 1-1. http://www.scopus.com/inward/record.url?eid=2-s2.0-84962182277&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2016.02.020
  41. Anes, V.; Reis, L.; De Freitas, M.. "On the assessment of multiaxial fatigue damage under variable amplitude loading". Frattura ed Integrita Strutturale 10 37 (2016): 124-130. http://www.scopus.com/inward/record.url?eid=2-s2.0-84976625867&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.37.17
  42. de Freitas, M.; Reis, L.; Meggiolaro, M.A.; de Castro, J.T.P.. "Comparison between SSF and critical-plane models to predict fatigue lives under multiaxial proportional load histories". Frattura ed Integrita Strutturale 10 38 (2016): 121-127. http://www.scopus.com/inward/record.url?eid=2-s2.0-84991380292&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.38.16
  43. Vieira, M.; De Freitas, M.; Reis, L.; Ribeiro, A.M.R.; Da Fonte, M.. "Development of a very high cycle fatigue (VHCF) multiaxial testing device". Frattura ed Integrita Strutturale 10 37 (2016): 131-137. http://www.scopus.com/inward/record.url?eid=2-s2.0-84976619297&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.37.18
  44. Fonte, M.; Duarte, P.; Reis, L.; Freitas, M.; Infante, V.. "Failure mode analysis of two crankshafts of a single cylinder diesel engine". Engineering Failure Analysis 56 (2015): 185-193. http://www.scopus.com/inward/record.url?eid=2-s2.0-84941997038&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2015.02.014
  45. Fonte, M.; Anes, V.; Duarte, P.; Reis, L.; Freitas, M.. "Crankshaft failure analysis of a boxer diesel motor". Engineering Failure Analysis 56 (2015): 109-115. http://www.scopus.com/inward/record.url?eid=2-s2.0-84941995456&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2015.03.014
  46. Fonte, M.; Duarte, P.; Anes, V.; Freitas, M.; Reis, L.. "On the assessment of fatigue life of marine diesel engine crankshafts". Engineering Failure Analysis 56 (2015): 51-57. http://www.scopus.com/inward/record.url?eid=2-s2.0-84941994586&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2015.04.014
  47. Baptista, R.; Claudio, R.A.; Reis, L.; Madeira, J.F.A.; Guelho, I.; Freitas, M.. "Optimization of cruciform specimens for biaxial fatigue loading with direct multi search". Theoretical and Applied Fracture Mechanics 80 (2015): 65-72. http://www.scopus.com/inward/record.url?eid=2-s2.0-84946495948&partnerID=MN8TOARS.
    10.1016/j.tafmec.2015.06.009
  48. Lopes, J.; Freitas, M.; Stefaniak, D.; Camanho, P.P.. "Inter-laminar shear stress in hybrid CFRP/austenitic steel". Frattura ed Integrita Strutturale 31 (2015): 67-79. http://www.scopus.com/inward/record.url?eid=2-s2.0-84920443527&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.31.06
  49. de Freitas, M.; Iacoviello, F.; Martín-Meizoso, A.. "1st multi-lateral workshop on fracture - Preface". Theoretical and Applied Fracture Mechanics 80 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84946494300&partnerID=MN8TOARS.
    10.1016/j.tafmec.2015.10.001
  50. Azevedo, C.; Infante, V.; Clegg, R.; de Freitas, M.. "The Sixth International Conference on Engineering Failure Analysis". Engineering Failure Analysis 56 (2015): http://www.scopus.com/inward/record.url?eid=2-s2.0-84941955452&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2015.08.039
  51. da Fonte, M.; Reis, L.; de Freitas, M.. "Fatigue crack growth under rotating bending loading on aluminium alloy 7075-T6 and the effect of a steady torsion". Theoretical and Applied Fracture Mechanics 80 (2015): 57-64. http://www.scopus.com/inward/record.url?eid=2-s2.0-84946494714&partnerID=MN8TOARS.
    10.1016/j.tafmec.2015.05.006
  52. Fonte, M.; Freitas, M.; Li, B.; Duarte, P.; Reis, L.. "Welding assessment of a damaged crane pedestal of a container ship". Ciencia e Tecnologia dos Materiais 27 1 (2015): 10-14. http://www.scopus.com/inward/record.url?eid=2-s2.0-84947788959&partnerID=MN8TOARS.
    10.1016/j.ctmat.2015.04.001
  53. Anes, V.; Reis, L.; de Freitas, M.. "Random accumulated damage evaluation under multiaxial fatigue loading conditions". Frattura ed Integrita Strutturale 9 33 (2015): 309-318. http://www.scopus.com/inward/record.url?eid=2-s2.0-84934297993&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.33.35
  54. Duarte, F.F.; Infante, V.I.V.; Moreira, P.M.G.; Freitas, M.D.; De Castro, P.M.S.T.. "The effect of welding direction in the fatigue life of aluminium FS welded lap joints". International Journal of Structural Integrity 6 6 (2015): 775-786. http://www.scopus.com/inward/record.url?eid=2-s2.0-84948427220&partnerID=MN8TOARS.
    10.1108/IJSI-02-2015-0006
  55. Anes, V.; Reis, L.; Freitas, M.. "Evaluation of the AZ31 cyclic elastic-plastic behaviour under multiaxial loading conditions". Frattura ed Integrita Strutturale 30 (2014): 282-292. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907983716&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.30.35
  56. Anes, V.; Reis, L.; Li, B.; Freitas, M.; Sonsino, C.M.. "Minimum Circumscribed Ellipse (MCE) and Stress Scale Factor (SSF) criteria for multiaxial fatigue life assessment". Theoretical and Applied Fracture Mechanics 73 (2014): 109-119. http://www.scopus.com/inward/record.url?eid=2-s2.0-84908018208&partnerID=MN8TOARS.
    10.1016/j.tafmec.2014.08.008
  57. Cláudio, R.A.; Reis, L.; Freitas, M.. "Biaxial high-cycle fatigue life assessment of ductile aluminium cruciform specimens". Theoretical and Applied Fracture Mechanics 73 (2014): 82-90. http://www.scopus.com/inward/record.url?eid=2-s2.0-84908053281&partnerID=MN8TOARS.
    10.1016/j.tafmec.2014.08.007
  58. da Fonte, M.; Reis, L.; De Freitas, M.. "The effect of steady torsion on fatigue crack growth under rotating bending loading on aluminium alloy 7075-T6". Frattura ed Integrita Strutturale 30 (2014): 360-368. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907998101&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.30.43
  59. Anes, V.; Reis, L.; Li, B.; De Freitas, M.. "New cycle counting method for multiaxial fatigue". International Journal of Fatigue 67 (2014): 78-94. http://www.scopus.com/inward/record.url?eid=2-s2.0-84904260885&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2014.02.010
  60. Infante, V.; Reis, L.; de Freitas, M.. "Failure analysis of landing gears trunnions due to service". Engineering Failure Analysis 41 (2014): 118-123. http://www.scopus.com/inward/record.url?eid=2-s2.0-84899652957&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2014.02.011
  61. Anes, V.; Reis, L.; Li, B.; Freitas, M.. "Crack path evaluation on HC and BCC microstructures under multiaxial cyclic loading". International Journal of Fatigue 58 (2014): 102-113. http://www.scopus.com/inward/record.url?eid=2-s2.0-84887245325&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2013.03.014
  62. Montalvão, D.; Shengwen, Q.; Freitas, M.. "A study on the influence of Ni-Ti M-Wire in the flexural fatigue life of endodontic rotary files by using Finite Element Analysis". Materials Science and Engineering C 40 (2014): 172-179. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922393840&partnerID=MN8TOARS.
    10.1016/j.msec.2014.03.061
  63. Anes, V.; Reis, L.; Li, B.; De Freitas, M.. "New approach to evaluate non-proportionality in multiaxial loading conditions". Fatigue and Fracture of Engineering Materials and Structures 37 12 (2014): 1338-1354. http://www.scopus.com/inward/record.url?eid=2-s2.0-84948472949&partnerID=MN8TOARS.
    10.1111/ffe.12192
  64. Anes, V.; Reis, L.; Li, B.; Fonte, M.; De Freitas, M.. "New approach for analysis of complex multiaxial loading paths". International Journal of Fatigue 62 (2014): 21-33. http://www.scopus.com/inward/record.url?eid=2-s2.0-84898017653&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2013.05.004
  65. Reis, L.; Li, B.; De Freitas, M.. "A multiaxial fatigue approach to Rolling Contact Fatigue in railways". International Journal of Fatigue 67 (2014): 191-202. http://www.scopus.com/inward/record.url?eid=2-s2.0-84904268187&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2014.02.001
  66. Lage, Y.; Cachão, H.; Reis, L.; Fonte, M.; De Freitas, M.; Ribeiro, A.. "A damage parameter for HCF and VHCF based on hysteretic damping". International Journal of Fatigue 62 (2014): 2-9. http://www.scopus.com/inward/record.url?eid=2-s2.0-84897976585&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2013.10.010
  67. Baptista, R.; Claudio, R.A.; Reis, L.; Guelho, I.; Freitas, M.; Madeira, J.F.A.. "Design optimization of cruciform specimens for biaxial fatigue loading". Frattura ed Integrita Strutturale 30 (2014): 118-126. http://www.scopus.com/inward/record.url?eid=2-s2.0-84907981204&partnerID=MN8TOARS.
    10.3221/IGF-ESIS.30.16
  68. Marat-Mendes, R.; De Freitas, M.. "Fractographic analysis of delamination in glass/fibre epoxy composites". Journal of Composite Materials 47 12 (2013): 1437-1448. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878314950&partnerID=MN8TOARS.
    10.1177/0021998312448496
  69. Fonte, M.; Li, B.; Reis, L.; Freitas, M.. "Crankshaft failure analysis of a motor vehicle". Engineering Failure Analysis 35 (2013): 147-152. http://www.scopus.com/inward/record.url?eid=2-s2.0-84888138922&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2013.01.016
  70. Marat-Mendes, R.; Freitas, M.. "Mixed-mode delamination of glass/epoxy laminated composite materials,Critérios de delaminação em modo-misto de materiais compósitos laminados de vidro/epóxido". Ciencia e Tecnologia dos Materiais 25 1 (2013): 1-8. http://www.scopus.com/inward/record.url?eid=2-s2.0-84901407568&partnerID=MN8TOARS.
    10.1016/j.ctmat.2013.12.001
  71. Belbute, P.; Araújo, A.L.; Teixeira De Freitas, S.; De Freitas, M.. "A finite element for bending analysis of sandwich composite beams". Civil-Comp Proceedings 99 (2012): http://www.scopus.com/inward/record.url?eid=2-s2.0-84893934920&partnerID=MN8TOARS.
  72. Fonte, M.; Reis, L.; Freitas, M.. "Failure analysis of a gear wheel of a marine azimuth thruster". Engineering Failure Analysis 18 7 (2011): 1884-1888. http://www.scopus.com/inward/record.url?eid=2-s2.0-80052729429&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2011.07.009
  73. Freitas, M.D.; Reis, L.; Fonte, M.D.; Li, B.. "Effect of steady torsion on fatigue crack initiation and propagation under rotating bending: Multiaxial fatigue and mixed-mode cracking". Engineering Fracture Mechanics 78 5 (2011): 826-835. http://www.scopus.com/inward/record.url?eid=2-s2.0-79952488745&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2009.12.012
  74. Alves, C.; Dias, A.P.S.; Diogo, A.C.; Ferrã£o, P.M.C.; Luz, S.M.; Silva, A.J.; Reis, L.; Freitas, M.. "Eco-composite: The effects of the jute fiber treatments on the mechanical and environmental performance of the composite materials". Journal of Composite Materials 45 5 (2011): 573-589. http://www.scopus.com/inward/record.url?eid=2-s2.0-85001182136&partnerID=MN8TOARS.
    10.1177/0021998310376111
  75. Reis, L.; Li, B.; De Freitas, M.. "Multiaxial loadings with different frequencies between axial and torsional components in 42CrMo4 steel". International Journal of Structural Integrity 1 4 (2010): 303-313. http://www.scopus.com/inward/record.url?eid=2-s2.0-79955021497&partnerID=MN8TOARS.
    10.1108/17579861011099141
  76. Marat-Mendes, R.M.; Freitas, M.M.. "Failure criteria for mixed mode delamination in glass fibre epoxy composites". Composite Structures 92 9 (2010): 2292-2298. http://www.scopus.com/inward/record.url?eid=2-s2.0-77950860761&partnerID=MN8TOARS.
    10.1016/j.compstruct.2009.07.017
  77. Alves, C.; Ferrão, P.M.C.; Silva, A.J.; Reis, L.G.; Freitas, M.; Rodrigues, L.B.; Alves, D.E.. "Ecodesign of automotive components making use of natural jute fiber composites". Journal of Cleaner Production 18 4 (2010): 313-327. http://www.scopus.com/inward/record.url?eid=2-s2.0-75749153969&partnerID=MN8TOARS.
    10.1016/j.jclepro.2009.10.022
  78. Li, B.; Amaral, P.M.; Reis, L.; Anjinho, C.A.; Rosa, L.G.; Freitas, M.d.. "3D-modelling of the local plastic deformation and residual stresses of PM diamond-metal matrix composites". Computational Materials Science 47 4 (2010): 1023-1030. http://www.scopus.com/inward/record.url?eid=2-s2.0-74149090298&partnerID=MN8TOARS.
    10.1016/j.commatsci.2009.12.001
  79. Alves, C.; Ferrão, P.M.C.; Freitas, M.; Silva, A.J.; Luz, S.M.; Alves, D.E.. "Sustainable design procedure: The role of composite materials to combine mechanical and environmental features for agricultural machines". Materials and Design 30 10 (2009): 4060-4068. http://www.scopus.com/inward/record.url?eid=2-s2.0-67649652020&partnerID=MN8TOARS.
    10.1016/j.matdes.2009.05.015
  80. Fonte, M.; de Freitas, M.. "Marine main engine crankshaft failure analysis: A case study". Engineering Failure Analysis 16 6 (2009): 1940-1947. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349134727&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2008.10.013
  81. Romeiro, F.; de Freitas, M.; da Fonte, M.. "Fatigue crack growth with overloads/underloads: Interaction effects and surface roughness". International Journal of Fatigue 31 11-12 (2009): 1889-1894. http://www.scopus.com/inward/record.url?eid=2-s2.0-68949105969&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2009.01.001
  82. Infante, V.; Silva, J.M.; de Freitas, M.; Reis, L.. "Failures analysis of compressor blades of aeroengines due to service". Engineering Failure Analysis 16 4 (2009): 1118-1125. http://www.scopus.com/inward/record.url?eid=2-s2.0-62649155221&partnerID=MN8TOARS.
    10.1016/j.engfailanal.2008.07.005
  83. Reis, L.; Li, B.; de Freitas, M.. "Crack initiation and growth path under multiaxial fatigue loading in structural steels". International Journal of Fatigue 31 11-12 (2009): 1660-1668. http://www.scopus.com/inward/record.url?eid=2-s2.0-68949103992&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2009.01.013
  84. Li, B.; Reis, L.; de Freitas, M.. "Comparative study of multiaxial fatigue damage models for ductile structural steels and brittle materials". International Journal of Fatigue 31 11-12 (2009): 1895-1906. http://www.scopus.com/inward/record.url?eid=2-s2.0-68949132925&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2009.01.006
  85. Marat-Mendes, R.; de Freitas, M.. "Characterisation of the edge crack torsion (ECT) test for the measurement of the mode III interlaminar fracture toughness". Engineering Fracture Mechanics 76 18 (2009): 2799-2809. http://www.scopus.com/inward/record.url?eid=2-s2.0-70450224478&partnerID=MN8TOARS.
    10.1016/j.engfracmech.2009.06.016
  86. Freitas, M.V.; Marques, J.F.; Cabral, H.N.. "Parasitological diversity of the common goby, Pomatoschistus microps (Krøyer, 1838), in estuarine systems along the Portuguese coast". Journal of Applied Ichthyology 25 2 (2009): 168-172. http://www.scopus.com/inward/record.url?eid=2-s2.0-70350255760&partnerID=MN8TOARS.
    10.1111/j.1439-0426.2008.01205.x
  87. Reis, L.; Amaral, P.M.; Li, B.; de Freitas, M.; Rosa, L.G.. "Evaluation of the residual stresses due to the sintering process of diamond-metal matrix hot-pressed tools". Theoretical and Applied Fracture Mechanics 49 2 (2008): 226-231. http://www.scopus.com/inward/record.url?eid=2-s2.0-40249116678&partnerID=MN8TOARS.
    10.1016/j.tafmec.2007.11.007
  88. Fonte, M.; Romeiro, F.; Freitas, M.. "Environment effects and surface roughness on fatigue crack growth at negative R-ratios". International Journal of Fatigue 29 9-11 (2007): 1971-1977. http://www.scopus.com/inward/record.url?eid=2-s2.0-34548039731&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2007.02.027
  89. Li, B.; Reis, L.; De Freitas, M.. "Simulation of cyclic stress/strain evolutions for multiaxial fatigue life prediction". International Journal of Fatigue 28 5-6 (2006): 451-458. http://www.scopus.com/inward/record.url?eid=2-s2.0-30844446965&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2005.07.038
  90. de Freitas, M.; de Carvalho, R.. "Residual strength of a damaged laminated CFRP under compressive fatigue stresses". Composites Science and Technology 66 3-4 (2006): 373-378. http://www.scopus.com/inward/record.url?eid=2-s2.0-29644438450&partnerID=MN8TOARS.
    10.1016/j.compscitech.2005.07.024
  91. De Freitas, M.; Reis, L.; Li, B.. "Multiaxial mixed-mode cracking - Small crack initiation and propagation". Materialpruefung/Materials Testing 48 1-2 (2006): 36-43. http://www.scopus.com/inward/record.url?eid=2-s2.0-32944471993&partnerID=MN8TOARS.
  92. Araújo dos Santos, J.V.; Lopes, H.M.R.; Vaz, M.; Mota Soares, C.M.; Mota Soares, C.A.; de Freitas, M.J.M.. "Damage localization in laminated composite plates using mode shapes measured by pulsed TV holography". Composite Structures 76 3 (2006): 272-281. http://www.scopus.com/inward/record.url?eid=2-s2.0-33747854592&partnerID=MN8TOARS.
    10.1016/j.compstruct.2006.06.034
  93. Fonte, M.; Reis, L.; Romeiro, F.; Li, B.; Freitas, M.. "The effect of steady torsion on fatigue crack growth in shafts". International Journal of Fatigue 28 5-6 (2006): 609-617. http://www.scopus.com/inward/record.url?eid=2-s2.0-30844456861&partnerID=MN8TOARS.
    10.1016/j.ijfatigue.2005.06.051
  94. de Freitas, M.; Reis, L.; Li, B.. "Comparative study on biaxial low-cycle fatigue behaviour of three structural steels". Fatigue and Fracture of Engineering Materials and Structures 29 12 (2006): 992-999. http://www.scopus.com/inward/record.url?eid=2-s2.0-33751119542&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2006.01061.x
  95. Reis, L.; Li, B.; de Freitas, M.. "Analytical and experimental studies on fatigue crack path under complex multi-axial loading". Fatigue and Fracture of Engineering Materials and Structures 29 4 (2006): 281-289. http://www.scopus.com/inward/record.url?eid=2-s2.0-33745812801&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2006.01001.x
  96. Reis, L.; Li, B.; Leite, M.; De Freitas, M.. "Effects of non-proportional loading paths on the orientation of fatigue crack path". Fatigue and Fracture of Engineering Materials and Structures 28 5 (2005): 445-454. http://www.scopus.com/inward/record.url?eid=2-s2.0-17744373091&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2005.00882.x
  97. Reis, L.; Fonseca, A.; De Freitas, M.. "Methodology for fatigue life assessment of the structural integrity of fighter aircraft". Fatigue and Fracture of Engineering Materials and Structures 27 9 (2004): 873-877. http://www.scopus.com/inward/record.url?eid=2-s2.0-4143085978&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2004.00807.x
  98. Reis, L.; Li, B.; de Freitas, M.. "Biaxial fatigue for proportional and non-proportional loading paths". Fatigue and Fracture of Engineering Materials and Structures 27 9 (2004): 775-784. http://www.scopus.com/inward/record.url?eid=2-s2.0-4143091461&partnerID=MN8TOARS.
    10.1111/j.1460-2695.2004.00769.x
  99. Da Fonte, M.; Romeiro, F.; De Freitas, M.; Stanzl-Tschegg, S.E.; Tschegg, E.K.; Vasudévan, A.K.. "The effect of microstructure and environment on fatigue crack growth in 7049 aluminium alloy at negative stress ratios". International Journal of Fatigue 25 9-11 (2003): 1209-1216. http://www.scopus.com/inward/record.url?eid=2-s2.0-0242493472&partnerID=MN8TOARS.
    10.1016/S0142-1123(03)00150-6
  100. Silva, A.; De Freitas, M.J.M.. "Mixed-mode delamination growth of laminar composites by using three-dimensional finite element modeling". Fatigue and Fracture of Engineering Materials and Structures 26 6 (2003): 543-549. http://www.scopus.com/inward/record.url?eid=2-s2.0-0037608734&partnerID=MN8TOARS.
    10.1046/j.1460-2695.2003.00643.x
  101. Santos, J.; Freitas, M.; Li, B.; Trigo, T.P.. "Fatigue assessment of mechanical components under complex multiaxial loading". European Structural Integrity Society 31 C (2003): 463-482. http://www.scopus.com/inward/record.url?eid=2-s2.0-77957057364&partnerID=MN8TOARS.
    10.1016/S1566-1369(03)80025-0
  102. Pommier, S.; De Freitas, M.. "Effect on fatigue crack growth of interactions between overloads". Fatigue and Fracture of Engineering Materials and Structures 25 7 (2002): 709-722. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036640805&partnerID=MN8TOARS.
    10.1046/j.1460-2695.2002.00531.x
  103. Li, B.; De Freitas, M.. "A procedure for fast evaluation of high-cycle fatigue under multiaxial random loading". Journal of Mechanical Design, Transactions of the ASME 124 3 (2002): 558-563. http://www.scopus.com/inward/record.url?eid=2-s2.0-0036751450&partnerID=MN8TOARS.
    10.1115/1.1485291
  104. Li, B.; Santos, L.T.; De Freitas, M.. "A computerized procedure for long-life fatigue assessment under complex multiaxial loading". Fatigue and Fracture of Engineering Materials and Structures 24 3 (2001): 165-177. http://www.scopus.com/inward/record.url?eid=2-s2.0-0035268378&partnerID=MN8TOARS.
    10.1046/j.1460-2695.2001.00389.x
  105. De Freitas, M.; Silva, A.; Reis, L.. "Numerical evaluation of failure mechanisms on composite specimens subjected to impact loading". Composites Part B: Engineering 31 3 (2000): 199-207. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033727498&partnerID=MN8TOARS.
    10.1016/S1359-8368(00)00003-2
  106. Araújo, A.L.; Mota Soares, C.M.; Moreira De Freitas, M.J.; Pedersen, P.; Herskovits, J.. "Combined numerical-experimental model for the identification of mechanical properties of laminated structures". Composite Structures 50 4 (2000): 363-372. http://www.scopus.com/inward/record.url?eid=2-s2.0-0034352962&partnerID=MN8TOARS.
    10.1016/S0263-8223(00)00113-6
  107. Li, B.; Santos, J.L.T.; De Freitas, M.. "Unified numerical approach for multiaxial fatigue limit evaluation". Mechanics of Structures and Machines 28 1 (2000): 85-103. http://www.scopus.com/inward/record.url?eid=2-s2.0-0033898591&partnerID=MN8TOARS.
    10.1081/SME-100100613
  108. Da Fonte, M.; De Freitas, M.. "Stress intensity factors for semi-elliptical surface cracks in round bars under bending and torsion". International Journal of Fatigue 21 5 (1999): 457-463. http://www.scopus.com/inward/record.url?eid=2-s2.0-0344672366&partnerID=MN8TOARS.
    10.1016/S0142-1123(98)00090-5
  109. De Freitas, M.; Reis, L.. "Failure mechanisms on composite specimens subjected to compression after impact". Composite Structures 42 4 (1998): 365-373. http://www.scopus.com/inward/record.url?eid=2-s2.0-0032148177&partnerID=MN8TOARS.
    10.1016/S0263-8223(98)00081-6
  110. Fonte, M.A.; Freitas, M.M.. "Semi-elliptical fatigue crack growth under rotating or reversed bending combined with steady torsion". Fatigue and Fracture of Engineering Materials and Structures 20 6 (1997): 895-906. http://www.scopus.com/inward/record.url?eid=2-s2.0-0030680636&partnerID=MN8TOARS.
  111. Antiñolo, A.; Carrillo-Hermosilla, F.; Garcia-Yuste, S.; Freitas, M.; Otero, A.; Prashar, S.; Villaseñor, E.; Fajardo, M.. "Insertion reactions of heterocumulenes into the niobium-hydride bond of isocyanide and carbonyl niobocene complexes". Inorganica Chimica Acta 259 1-2 (1997): 101-105. http://www.scopus.com/inward/record.url?eid=2-s2.0-0038871787&partnerID=MN8TOARS.
  112. Reis, L.; De Freitas, M.. "Damage growth analysis of low velocity impacted composite panels". Composite Structures 38 1-4 (1997): 509-515. http://www.scopus.com/inward/record.url?eid=2-s2.0-0031136301&partnerID=MN8TOARS.
  113. Araújo, A.L.; Mota Soares, C.M.; Moreira De Freitas, M.J.. "Characterization of material parameters of composite plate specimens using optimization and experimental vibrational data". Composites Part B: Engineering 27 2 PART B (1996): 185-191. http://www.scopus.com/inward/record.url?eid=2-s2.0-0029777574&partnerID=MN8TOARS.
    10.1016/1359-8368(95)00050-X
  114. DE Freitas, M.; François, D.. "ANALYSIS OF FATIGUE CRACK GROWTH IN ROTARY BEND SPECIMENS AND RAILWAY AXLES". Fatigue & Fracture of Engineering Materials & Structures 18 2 (1995): 171-178. http://www.scopus.com/inward/record.url?eid=2-s2.0-0029256415&partnerID=MN8TOARS.
    10.1111/j.1460-2695.1995.tb00152.x
  115. Silva, A.; Travassos, J.; de Freitas, M.; Soares, C.M.M.. "Failure prediction of composite T-beams subjected to lateral load on the web". Composite Structures 32 1-4 (1995): 601-607. http://www.scopus.com/inward/record.url?eid=2-s2.0-0028992560&partnerID=MN8TOARS.
    10.1016/0263-8223(95)00051-8
  116. Pantelis, D.; Michaud, H.; de Freitas, M.. "Wear behaviour of laser surface hardfaced steels with tungsten carbide powder injection". Surface and Coatings Technology 57 2-3 (1993): 123-131. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027592378&partnerID=MN8TOARS.
    10.1016/0257-8972(93)90028-M
  117. Silva, A.; Travassos, J.; de Freitas, M.M.; Mota Soares, C.M.. "Mechanical bending behaviour of composite T-beams". Composite Structures 25 1-4 (1993): 579-586. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027153722&partnerID=MN8TOARS.
    10.1016/0263-8223(93)90206-6
  118. Soares, C.M.M.; de Freitas, M.M.; Araújo, A.L.; Pedersen, P.. "Identification of material properties of composite plate specimens". Composite Structures 25 1-4 (1993): 277-285. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027166458&partnerID=MN8TOARS.
    10.1016/0263-8223(93)90174-O
  119. de Freitas, M.; Pereira, M.S.; Michaud, H.; Pantelis, D.. "Analysis of residual stresses induced by laser processing". Materials Science and Engineering A 167 1-2 (1993): 115-122. http://www.scopus.com/inward/record.url?eid=2-s2.0-0027642104&partnerID=MN8TOARS.
    10.1016/0921-5093(93)90344-E
  120. Moreira de Freitas, M.; Francois, D.. "Formation de phase blanche en fatigue de roulement". Scripta Metallurgica 17 6 (1983): 683-686. http://www.scopus.com/inward/record.url?eid=2-s2.0-0005640115&partnerID=MN8TOARS.
    10.1016/0036-9748(83)90474-X
Livro
  1. Silva1, C.A.; Nascimento1, R.C.R.; Martins, M.S.; Freitas, M.C.S.. Influence of temperature on ductile-fragile behavior. 2014.
    10.4028/www.scientific.net/MSF.802.383
  2. Reis, L.; Anes, V.; de Freitas, M.. AZ31 magnesium alloy multiaxial LCF behavior: Theory, simulation and experiments. 2014.
    10.4028/www.scientific.net/AMR.891-892.1366
  3. Duarte, P.; Infante, V.; de Freitas, M.. Influence of milling and abrasive waterjet cutting on the fatigue behaviour of DP600 steel sheet. 2014.
    10.4028/www.scientific.net/AMR.891-892.1761
  4. Anes, V.; Reis, L.; De Freitas, M.. A new criterion for evaluating multiaxial fatigue damage under multiaxial random loading conditions. 2014.
    10.4028/www.scientific.net/AMR.891-892.1360
  5. Marat-Mendes, R.; de Freitas, M.. Fractographic observation of various loading modes of fibre reinforced laminates. 2013.
    10.4028/www.scientific.net/MSF.730-732.337
  6. Reis, L.; Anes, V.; Li, B.; Freitas, M.. Effect of non-proportionality in the fatigue strength of 42CrMo4 steel. 2013.
    10.4028/www.scientific.net/MSF.730-732.757
  7. Furtado, S.C.R.; Silva, A.J.; Alves, C.; Reis, L.; Freitas, M.; Ferrão, P.. Natural fibre composites: Automotive applications. 2012.
  8. Reis, L.; Carvalho, P.; Alves, C.; Freitas, M.. Mechanical behaviour of sandwich beams manufactured with glass or jute fiber in facings and cork agglomerates as core. 2010.
    10.4028/www.scientific.net/MSF.636-637.245
  9. Luz, S.M.; Ferrão, P.M.C.; Alves, C.; Freitas, M.; Caldeira-Pires, A.. Ecodesign applied to components based on sugarcane fibers composites. 2010.
    10.4028/www.scientific.net/MSF.636-637.226
  10. Li, B.; Amaral, P.M.; Reis, L.; Anjinho, C.A.; Rosa, L.G.; Freitas, M.. 3D-FEM simulation and design optimization of the diamond cutting tools under various loading conditions. 2010.
    10.4028/www.scientific.net/MSF.636-637.1131
  11. Amaral, P.M.; Anjinho, C.; Li, B.; Reis, L.; De Freitas, M.; Guerra Rosa, L.. Thermal Residual Streses Related to the Sintering Process of Metal Matrix Diamond Tools. 2010.
    10.1002/9780470610794.ch53
  12. Reis, L.; Amaral, P.; Li, B.; Anjinho, C.; Rosa, L.G.; Freitas, M.. Finite element analysis of the thermal residual stresses of diamond cutting tools in the sintering process. 2008.
  13. Reis, L.; Li, B.; De Freitas, M.. Crack growth orientation in two structural materials under multiaxial fatigue loading. 2008.
  14. Romeiro, F.; De Freitas, M.; Da Fonte, M.. Interaction effects due to overloads and underloads on fatigue crack growth. 2007.
  15. Li, B.; Reis, L.; De Freitas, M.. Simulations of cyclic plasticity and fatigue behavior of structural steels under multiaxial loading. 2006.
  16. Reis, L.; Li, B.; De Freitas, M.. Comparative study of the additional hardening effects of three structural steels. 2006.
  17. Carpinteri, A.; de Freitas, M.; Spagnoli, A.. Preface. 2003.
    10.1016/S1566-1369(03)80001-8
  18. Reis, L.; Li, B.; De Freitas, M.. Stress relaxation on biaxial low cycle fatigue. 2002.
  19. Silva, A.; de Freitas, M.. Computational prediction of strain energy release rates of delamination in composite materials. 2000.
    10.1016/S1566-1369(00)80015-1
  20. Da Fonte, M.A.; De Freitas, M.M.. Stress intensity factors for two critical angular positions of semi-elliptical surface cracks in shafts. 2000.
  21. de Fonte, M.; Gomes, E.; de Freitas, M.. Stress intensity factors for semi-elliptical surface cracks in round bars subjected to mode I (bending) and mode III (torsion) loading. 1999.
    10.1016/S1566-1369(99)80019-3
  22. De Freitas, M.; Reis, L.. Impact damage of composite structures. 1999.

Outros

Outra produção
  1. Monitoring the pH and conductivity of dielectric pulps using the ISO and IEC Standard Guidelines. 2003. Nogueira, J.M.F.; Freitas, M.; Gonçalves, M.. http://www.scopus.com/inward/record.url?eid=2-s2.0-0347599035&partnerID=MN8TOARS.
Atividades

Orientação

Título / Tema
Papel desempenhado 		Curso (Tipo)
Instituição / Organização
2012 - 2012 Avaliação do dano em fadiga de materiais a muito elevada frequência
Orientador
 Engenharia Mecânica (Mestrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2012 - 2012 Damage tolerance analysis of composite laminates regarding different production conditions
Coorientador
 Engenharia Aeroespacial (Mestrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2011 - 2011 Análise da utilização de Fibras Vegetais no Projecto de Produtos para a industria automóvel
Orientador
 Engenharia Mecânica (Doutoramento)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2010 - 2010 Estudo do Comportamento em Flexão de Vigas Compósitas Sandwich
Orientador
 Engenharia Aeroespacial (Mestrado)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2007 - 2007 Propagação de Fendas por Fadiga em Regimes de Cargas de Amplitude Variável
Orientador
 Engenharia Mecânica (Doutoramento)
2005 - 2005 Critérios de Delaminação em Materiais Compósitos Sob Solicitações Multiaxiais
Orientador
 Engenharia Mecânica (Doutoramento)
2003 - 2003 Resistência Residual de um Compósito de Matriz Epoxídica Reforçado por Fibras de Carbono Após Reparação
Orientador
 Engenharia Mecânica (Doutoramento)
2001 - 2001 Propagação de Delaminagem em Compósitos de Matriz Polimérica
Orientador
 Engenharia Mecânica (Doutoramento)
1998 - 1998 Análise da Propagação por Fadiga de Fendas Semi-elípticas em Veios Sob Flexão e Torção
Orientador
 Engenharia Mecânica (Doutoramento)