???global.info.a_carregar???
L.M. Vilhena holds a Chemical Engineering degree from the Technical University of Lisbon (Instituto Superior Técnico), Portugal, as well as a PhD in Mechanical Engineering, field of Tribology, from LTIN - Laboratory for Tribology and Interface Nanotechnology - University of Ljubljana, Slovenia (November 10, 2012). After two years as a researcher at the European Organization for Nuclear Research (CERN) in Geneva, Switzerland, and one year at the Instituto Pedro Nunes - Association for Innovation and Development in Science and Technology (IPN) in Coimbra, Portugal, he worked as a Marie Curie Fellow (European Commission) in the European project "WEMESURF" (Characterisation of WEear MEchanisms and SURFace functionalities with regard to life time prediction and quality criteria - from micro to the nano range). From November 2010 to November 2011, he worked at the Centre for Research in Ceramics and Composite Materials, CICECO, University of Aveiro, Portugal, on the national project "New binders for the sintering process of Tungsten Carbide based hard metals: Development and mechanical characterization of new WC composites; correlation between composition, structure, microstructure, and mechanical properties." From June 2012 to June 2014, he worked in science and technology management at the University of Coimbra's Institute for Interdisciplinary Research and Division of Research Support and Promotion. From July 2014 to December 2018 (4 years + 5 months), he was doing Postdoctoral fellowship financed by FCT - Portuguese Foundation for Science and Technology at CEMMPRE - Centre for Mechanical Engineering, Materials, and Processes, University of Coimbra in BioTribology/Bioengineering – Study of the skin friction. A global advisory board assessed the first three years' worth of work as Excellent. Has been a researcher at the University of Coimbra since December 19, 2018, specializing in the mechanical characterization and tribological behaviour of various materials, including metals, polymers, ceramics, and composite materials. Possessing a varied curriculum vitae, including a PhD in mechanical engineering with a focus on mechanical design and a graduation in chemical engineering with a concentration in processes and industry. Having performed various tasks, such as switching between Surface and Physical Engineering and Materials Engineering. Considering a Zig-Zag career path as well; has worked at interdisciplinary institutes, international organizations with a significant industrial component, and research centres at both domestic and foreign universities. Research production: 45 publications in International Journals and 45 works in Conference Proceedings (49 indexed on Scopus) and 32 Participation in conferences and meetings in foreign countries where 25 Presentations were given. Participation in 8 Projects and reviewed for 36 International peer-reviewed-journals where 84 Research works were reviewed. Supervision of 2 PhD theses, 26 master theses, 6 of them from the Erasmus Mundus Joint European Master in Tribology of Surfaces and Interfaces. Member of the jury of 2 PhD thesis, 3 PhD project theses and 29 master theses, 8 presentations at national level in dissemination of funding opportunities (FP7 and Horizon 2020).
Ler resumo completo ↓
Identificação

Identificação pessoal

Nome completo
Luís Vilhena

Nomes de citação

  • Vilhena, Luís
  • L.M. Vilhena
  • Vilhena, L.M.

Identificadores de autor

Ciência ID
301C-53C9-5BEF
ORCID iD
0000-0001-9592-3120

Endereços de correio eletrónico

  • luisvilhena@gmail.com (Profissional)

Websites

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Mecânica - Engenharia Mecânica

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Inglês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Francês Utilizador independente (B1) Utilizador proficiente (C1) Utilizador independente (B1) Utilizador independente (B1)
Espanhol; Castelhano Utilizador independente (B1) Utilizador proficiente (C1) Utilizador elementar (A1) Utilizador independente (B1)
Formação
Grau Classificação
2012
Concluído
 Doctorate (Doutoramento)
Univerza v Ljubljani, Eslovénia
"Effect of Surface Texturing on Coefficient of Friction" (TESE/DISSERTAÇÃO)
 n/a
2002
Concluído
 Ciências de Engenharia - Engenharia Química (Licenciatura)
Universidade de Lisboa Instituto Superior Técnico, Portugal
 13
Percurso profissional

Ciência

Categoria Profissional
Instituição de acolhimento 		Empregador
2018/12/19 - Atual Investigador Auxiliar (carreira) (Investigação) Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2014/07 - 2018/12 Pós-doutorado (Investigação) Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2012/06 - 2014/06 Gestão de Ciência e Tecnologia Universidade de Coimbra Instituto de Investigação Interdisciplinar, Portugal
2010/10/01 - 2011/10/01 Pós-doutorado (Investigação) Universidade de Aveiro CICECO, Portugal
2007/03/01 - 2010/03/01 Assistente de Investigação (carreira) (Investigação) Univerza v Ljubljani Fakulteta za strojnistvo, Eslovénia
2006/03/01 - 2007/03/01 Investigador (Investigação) Associação para a Inovação e Desenvolvimento em Ciência e Tecnologia, Portugal
2003/02/01 - 2005/02/01 Estagiário de Investigação (Investigação) European Organization for Nuclear Research, Suiça
Projetos

Bolsa

Designação Financiadores
2024/01/01 - 2027/01/01 Cost Action Ocean Tribology Centre (OTC) - (CA23155)
CA23155
Investigador
2023/01/01 - 2025/12/31 Heat-induced epithelial permeability: a nanoscale-based solution for the treatment of fungal keratitis
na
Centro Hospitalar e Universitário de Coimbra EPE, Portugal
 Centro Hospitalar e Universitário de Coimbra EPE
Em curso
2024/01/01 - 2025/01/01 SpaDeLab
SpaDeLab
Investigador
2010/11/01 - 2011/11/01 INOVALIGANTES: New binders for the sintering of new Tungsten Carbide composites
QREN, 11428
Investigador Pós-doutorado
2006/03/01 - 2007/03/01 Revestimentos Duros - RevDur: Solution for stamping moulds
POCI/V.5/A037/2005
Bolseiro de Doutoramento

Projeto

Designação Financiadores
2023/01/01 - Atual Additive Manufacturing: Powders / Pores /Surface Topography & Mechanical Behavior
CENTRO-45-2021-30
Investigador
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Em curso
2024/04/09 - 2025/04/08 SpaDeLab – Space Debris Laboratory of the University of Coimbra
N/A
Universidade de Coimbra Faculdade de Ciencias e Tecnologia, Portugal

Instituto de Astrofísica e Ciências do Espaço, Portugal
Banco Santander Portugal
Em curso
2007/03/01 - 2010/03/01 WEMESURF - Characterisation of WEear MEchanisms and SURFace functionalities with regard to life time prediction and quality criteria - from micro to the nano range
MRTN-CT-2006-035589
Bolseiro de Integração na Investigação
Univerza v Ljubljani Fakulteta za strojnistvo, Eslovénia

Outro

Designação Financiadores
2025/03 - Atual Sustainable and Advanced Solutions for Electric Transportation-Related Integrity Problems
MPr-12-2023 - ICDT/2023
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Em avaliação
2018/07/26 - 2021/07/25 NANOFIRE - Thermal and Mechanical behaviour of Nano Cements and their application in steel construction as fire protection
POCI-01-0145-FEDER-31850
Bolseiro de Cientista Convidado
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
Em curso
Produções

Publicações

Artigo em conferência
  1. Luís Vilhena, Sharjeel Khan, André Garcia and Amílcar Ramalho. "Mechanical and tribological characterization of carbon fibre reinforced polymer (CFRP) for aerospace applications". Trabalho apresentado em 25th International Conference on Wear of Materials 2025, 2025.
  2. Amílcar Ramalho and Luís Vilhena. "Experimental approach in tribology: effects of test equipment dynamic response on the reliability and reproducibility of the results". 2025.
  3. E. Barnabas, B. Figueiredo, A.Ramalho,. "Lubricating properties of oil-based solutions containing graphene as additive". Trabalho apresentado em Lubmat, 2024.
  4. Aissani L., Vilhena L., Fernandes B., Ramalho A. "Friction and Wear Of DLC Coatings Lubricated Graphene Oil Suspensions". Trabalho apresentado em LUBMAT, 2024.
  5. KHALFALLAH, ALI; Aissani, L ; Silva, R; Vilhena, Luís; Ramalho, Amílcar. "Friction and wear of DLC coatings lubricated with graphene oil suspensions". Trabalho apresentado em LUBMAT-IBERTRIB-2024, KURSAAL, SAN SEBASTIAN, 2024.
    Publicado
  6. L.M. Vilhena, A. Ramalho. "Study of the frictional behavior of soft contact lenses by an oscillatory free-vibration tribometer". vitoria, 2023.
  7. 38. Mariana Cordeiro, Ana Sofia Coelho, Inês Amaro, Luis Vilhena, Amilcar Ramalho, Eunice Carrilho. "Evaluation of the effect of different cavity disinfectants on dentin adhesion of temporary teeth". Esposende, 2023.
  8. 39. Raquel Melo, Ana Coelho, Luís Vilhena, Inês Amaro, Eunice Carrilho and Amílcar Ramalho. "Effect of enzymatic chemo-mechanical agents on adhesion to dentin of permanent teeth: In vitro study". 2023.
  9. 40. Rui Eira, Ana Coelho, Luís Vilhena, Inês Amaro, Eunice Carrilho and Amílcar Ramalho. "The influence of irrigation on the polishing protocols of composite resins: an in vitro study". 2023.
  10. Luís Vilhena. "Mechanical characterization of several elastics used in orthodontics subject to different decay condition". Trabalho apresentado em X CONGRESS OF THE PORTUGUESE BIOMECHANIC SOCIETY, Figueira da Foz, 2023.
  11. Vilhena, Luís. "Effect of cavity disinfectants on adhesion to dentin: an in vitro study". Lisboa, 2022.
  12. L.M. Vilhena. "Strain hardening behaviour of CoCrMo". Trabalho apresentado em IBERTRIB 2022-11th Iberian Conference on Tribology, setubal, 2022.
  13. L.M. Vilhena. "Friction of soft contact lenses". Trabalho apresentado em ; IBERTRIB 2022-11th Iberian Conference on Tribology, setubal, 2022.
  14. LM Vilhena. "Development of WC-NiCr hardmetals". Trabalho apresentado em PLANSEE seminar - International conference to present new insights in the field of Refractory Metals and Hard Materials,, coimbra, 2022.
  15. L.M. Vilhena. "Skin friction: mechanical and tribological characterization of different papers used in everyday life". Trabalho apresentado em Tribology 2022, Tribology International Conference 2022, Barcelona, 2022.
  16. Vilhena, Luís. "Stiffness of the abutment-implant connection with different connections and abutments: an in vitro study". Trabalho apresentado em Congress of the Portuguese Society of Stomatology and Dentistry SPEMD20201, coimbra, 2021.
  17. Vilhena, Luís. "Discomfort of wearing personal protective equipment: a tribological approach". Trabalho apresentado em World Tribology Congress – WTC 2021, Lyon, 2021.
    Aceite para publicação
  18. Vilhena, Luís. "Design of New WC-based composites with increased Wear and Corrosion resistance". Trabalho apresentado em CEMMPRE Meeting, coimbra, 2021.
  19. Vilhena, Luís. "Wear of titanium implant platforms with different abutment connections and abutment materials: an in vitro study". Trabalho apresentado em Congress of the Portuguese Society of Stomatology and Dentistry SPEMD2020, Online, 2020.
    Publicado
  20. Malheiros, Luís Filipe; Pereira, P.; Vilhena, L.M.; Sacramento, J.; Senos, A.M.R.; Ramalho, Amílcar. "Study of the abrasive wear resistance of WC-based composites, produced with Co or Ni-rich binders, by ball-cratering method". Trabalho apresentado em EuroPM 2020, Virtu@l Congress, 2020.
    Publicado
  21. Vilhena, Luís. "characterisation in vitro of the frictional behavior of different contact lenses by innovative method". Trabalho apresentado em 46th Leeds-Lyon Symposium on Tribology, 2019.
  22. Vilhena, Luís. "Triboelectrochemical behaviour of Ti6Al4V alloy obtained by Additive Manufacturing - Selective Laser Melting". Trabalho apresentado em X Iberian Conference on Tribology / XI Iberian Vacuum Conference – IBERTRIVA 2019, seville, 2019.
  23. Korner, Florian; Lindmayer, Manfred; Kurrat, Michael; Gentsch, Dietmar. "Triboelectrochemical behaviour of biomedical materials used as implants under different contact conditions". Trabalho apresentado em European Corrosion Congress – EUROCORR 2018, krakow, 2018.
    10.1109/deiv.2008.4676754
  24. Vilhena, Luís. "Friction and wear of plastic mold extractors; case study". Trabalho apresentado em IBERTRIB 2017, IX Iberian conference on Tribology, 2017.
  25. Vilhena, Luís. "Studying the grip effect in sports material with a regular micro-textured pattern contacting with the human skin". Trabalho apresentado em IBERTRIB 2017, IX Iberian conference on Tribology, 2017.
  26. Vilhena, Luís. "Grooved surface texturing by electrical discharge machining (EDM) under different lubrication regimes". Trabalho apresentado em Lubrication, Maintenance and Tribology, Lubmat 2016, Bilbao, 2016.
  27. Vilhena, Luís. "Mechanical and tribological characterization of four commercial braking formulation materials". Trabalho apresentado em VIII Congreso Ibérico de Tribologia, IBERTRIB 2015, Cartagena, 2015.
  28. Vilhena, Luís. "Friction of human skin against different hospital fabrics for different contact conditions". Trabalho apresentado em VIII Congreso Ibérico de Tribologia, IBERTRIB 2015, Cartagena, 2015.
  29. Vilhena, Luís. "Microstructure and Mechanical Properties of WC-10 wt% Stainless Steel Composites". Trabalho apresentado em EURO PM2012, Basel, 2012.
  30. Vilhena, Luís. "Ucinkovitost oblicenja kontaktnih površin, Fakulteta za strojništvo". Trabalho apresentado em SLOTRIB 2010, Ljubljana, 2010.
  31. Vilhena, Luís. "Experimental and theoretical evaluation of texturing parameters on tribological behaviour of laser textured surfaces". Trabalho apresentado em 17th International Colloquium Tribology, Stuttgart, 2010.
  32. Vilhena, Luís. "Effectiveness of Surface Texturing in Different Lubrication Regimes". Trabalho apresentado em 14th NordTrib 2010, Storforsen, 2010.
  33. Vilhena, Luís. "TLA and nVCT for Cylinder Liner Wear Measurement, Impact of Surface Dimples". Trabalho apresentado em 17th International Colloquium Tribology, Stuttgart, 2010.
  34. Podgornik, B.; Sedlacek, M.; Vilhena, L.; Vižintin, J.. "Characterization and design of laser textured surfaces". 2010.
    10.1115/IJTC2009-15090
  35. Vilhena, L.M.; Marian, V.G.; Podgornik, B.; Vižintin, J.. "Experimental and theoretical evaluation of texturing parameters on tribological behaviour of laser textured surfaces". 2010.
  36. Corniani, E.; Jech, M.; Marian, V.G.; Vilhena, L.; Dedlacek, M.; Ripoll, M.R.; Ditro, F.; Franek, F.. "TLA and nVCT for cylinder linear wear measurement, impact of lasers surface texture". 2010.
  37. Vilhena, Luís. "Characterization and Design of Laser Textured Surface". Trabalho apresentado em ASME/STLE International Joint Tribology Conference, Memphis, 2009.
  38. Vilhena, Luís. "Experimental wear volume analysis on Al-Si-Cu laser textured cylinder liners using thin layer activation technique". Trabalho apresentado em World Tribology Congress, Kyoto, 2009.
  39. Vilhena, Luís. "influence of contact size on tribological behaviour of laser textured surfaces". Trabalho apresentado em Congresso Iberico de Tribologia, IBERTRIB 2009, Coimbra, 2009.
  40. Vilhena, Luís. "influence of texturing parameters and contact size on tribological behaviour of laser textured surfaces". Trabalho apresentado em European Conference on Tribology, ECOTRIB 2009, Pisa, 2009.
  41. Corniani, E.; Vilhena, L.M.; Marian, V.G.; Jech, M.; Rodriguez Ripoll, M.; Sedlacek, M.; Ditroi, F.; Franek, F.. "Experimental wear volume analysis on Al-Si-Cu laser textured cylinder liners using thin layer activation technique". 2009.
  42. Vilhena, Luís. "Altering tribological properties through laser surface texturing, Slovenian Conference on Tribology". Trabalho apresentado em SLOTRIB 08, ljubljana, 2008.
  43. Vilhena, Luís. "Surface texturing on boundary lubricated contacts". Trabalho apresentado em 35th Leeds-Lyon symposium on Tribology, Tuesday, Leeds, 2008.
  44. Vilhena, Luís. "Characterisation of WEear MEchanisms and SURFace functionalities with regard to life time prediction and quality criteria - from micro to the nano range". Trabalho apresentado em European Marie Curie Conference 2008, Barcelona, 2008.
  45. Vilhena, Luís. "Surface texturing, a viable option to improve tribological properties". Trabalho apresentado em European Marie Curie Conference 2008, Barcelona, 2008.
  46. Vilhena, Luís. "Action of oil additives when used in DLC coated contacts". Trabalho apresentado em 13th Nordic Symposium on Tribology, NORDTRIB 2008, Tampere, 2008.
  47. Candan, L.; Demir, A.; Akman, E.. "Surface texturing by pulsed Nd:YAG laser". Trabalho apresentado em 13th Nordic Symposium on Tribology, NORDTRIB 2008, Tampere, 2008.
    10.1063/1.2733161
  48. Vilhena, Luís. "W-Ti-N sputtered thin films: Solution for stamping moulds". Trabalho apresentado em European Conference on Tribology, ECOTRIB 07, Ljubljana, 2007.
  49. Vilhena, Luís. "Stabilization at low temperatures of o/w emulsions". Trabalho apresentado em 5th meeting of Food Chemistry, Porto, 2001.
Artigo em revista
  1. Coelho, A. S.; Vilhena, L.; Amaro, I.; Melo, A.; Paula, A.; Marto, C. M.; Ferreira, M. M.; Ramalho, A.; Carrilho, E.. "Effect of enzymatic chemo-mechanical agents on adhesion of composite resin to dentin of permanent teeth: an in vitro study". European Archives of Paediatric Dentistry (2024): http://dx.doi.org/10.1007/s40368-024-00949-9.
    10.1007/s40368-024-00949-9
  2. Hugo Caetano; Luís Vilhena; Amílcar Ramalho; Aldina Santiago; Luís Laím; Eduardo Monteiro. "Mechanical Characterisation of Gypsum-Based Passive Fire Protection Mortars with Micro and Nano Silica Particles". Applied Sciences (2024): https://doi.org/10.3390/app14198612.
    10.3390/app14198612
  3. Ney Francisco Ferreira; Filipe Fernandes; Patric Daniel Neis; Jean Carlos Poletto; Talha Bin Yaqub; Albano Cavaleiro; Luis Vilhena; Amilcar Ramalho. "Tribological Comparison of Coatings Produced by PVD Sputtering for Application on Combustion Piston Rings". Coatings (2024): https://doi.org/10.3390/coatings14091109.
    10.3390/coatings14091109
  4. Ferreira, Ney Francisco; Fernandes, Filipe; Neis, Patric Daniel; Poletto, Jean Carlos; Yaqub, Talha Bin; Cavaleiro, Albano; Vilhena, Luis; Ramalho, Amilcar. "Tribological Comparison of Coatings Produced by PVD Sputtering for Application on Combustion Piston Rings". Coatings 14 9 (2024): 1109. http://dx.doi.org/10.3390/coatings14091109.
    10.3390/coatings14091109
  5. Luís Vilhena; Amílcar Ramalho. "Effect of Protein (Bovine Serum Albumin) Content on the Frictional Behaviour of Soft Contact Lenses Using a Dynamic Oscillating Tribometer". Applied Sciences (2024): https://doi.org/10.3390/app14104311.
    10.3390/app14104311
  6. Mohammadamin Sadeghi; Takeru Omiya; Filipe Fernandes; Luís Vilhena; Amilcar Ramalho; Fábio Ferreira. "Influence of 1-Ethyl-3-methylimidazolium Diethylphosphate Ionic Liquid on the Performance of Eu- and Gd-Doped Diamond-like Carbon Coatings". Lubricants (2024): https://doi.org/10.3390/lubricants12010018.
    10.3390/lubricants12010018
  7. Luís Vilhena; Luís Afonso; Amílcar Ramalho. "Skin Friction: Mechanical and Tribological Characterization of Different Papers Used in Everyday Life". Materials (2023): https://doi.org/10.3390/ma16165724.
    10.3390/ma16165724
  8. Sharma, Pooja; Mahadeshwara, Manoj Rajankunte; Vilhena, Luís; Richhariya, Vipin; Silva, Filipe; Ramalho, Amílcar; Carvalho, Sandra; Cavaleiro, Albano. "Synergic effect of TMD coating on textured steel using micro-EDM". Surface and Coatings Technology 467 (2023): 129714. http://dx.doi.org/10.1016/j.surfcoat.2023.129714.
    10.1016/j.surfcoat.2023.129714
  9. Shahsharif Shaikh; Takeru Omiya; Albano Cavaleiro; Luis Vilhena; Amilcar Ramalho; Fábio Ferreira. "Impact of Temperature Variation on Friction Behaviour of Rare Earth-Doped Diamond-like Carbon Coatings with Ionic Liquid Lubricants". Lubricants (2023): https://doi.org/10.3390/lubricants11070302.
    10.3390/lubricants11070302
  10. Mohammadamin Sadeghi; Takeru Omiya; Filipe Fernandes; Luís Vilhena; Amilcar Ramalho; Fábio Ferreira. "Tribological Behavior of Doped DLC Coatings in the Presence of Ionic Liquid Additive under Different Lubrication Regimes". Coatings (2023): https://doi.org/10.3390/coatings13050891.
    10.3390/coatings13050891
  11. Pereira, P.; Rocha, A.M. Ferro; Bastos, A.C.; Oliveira, F.J.; Vilhena, L.M.; Ramalho, A.; Sacramento, J.; Malheiros, L.F.; Senos, A.M.R.. "Development of WC-NiCrMo hardmetals". International Journal of Refractory Metals and Hard Materials 112 (2023): 106147. http://dx.doi.org/10.1016/j.ijrmhm.2023.106147.
    10.1016/j.ijrmhm.2023.106147
  12. Manoj Rajankunte Mahadeshwara; Fátima Rosa; Todor Vuchkov; Luís Vilhena; Amílcar Ramalho; Pooja Sharma; Albano Cavaleiro. "Investigating the Synergistic Effect of Electrochemical Texturing and MoSeC Coatings on the Frictional Behaviour of Lubricated Contacts". Coatings (2023): https://doi.org/10.3390/coatings13040692.
    10.3390/coatings13040692
  13. Teresa A. Mendes; Luis Vilhena; Jaime Portugal; João Caramês; Amilcar L. Ramalho; Luis P. Lopes. "Wear of Titanium Implant Platforms with Different Abutment Connections and Abutment Materials: A Pilot Study". Journal of Functional Biomaterials (2023): https://doi.org/10.3390/jfb14040178.
    10.3390/jfb14040178
  14. Ana Coelho; Luís Vilhena; Maria Antunes; Inês Amaro; Anabela Paula; Carlos Miguel Marto; José Saraiva; et al. "Effect of Different Cavity Disinfectants on Adhesion to Dentin of Permanent Teeth". Journal of Functional Biomaterials (2022): https://doi.org/10.3390/jfb13040209.
    10.3390/jfb13040209
  15. Coelho, Ana; Vilhena, Luís; Antunes, Maria; Amaro, Inês; Paula, Anabela; Marto, Carlos Miguel; Saraiva, José; et al. "Effect of Different Cavity Disinfectants on Adhesion to Dentin of Permanent Teeth". Journal of Functional Biomaterials 13 4 (2022): 209. http://dx.doi.org/10.3390/jfb13040209.
    10.3390/jfb13040209
  16. Teresa Mendes; Luís Vilhena; Jaime Jaime; João Caramês; Amílcar Ramalho; Luís Lopes. "Influence of abutment and connection type on implant-abutment connection rigidity: an in vitro study". Revista Portuguesa de Estomatologia, Medicina Dentária e Cirurgia Maxilofacial (2022): https://doi.org/10.24873/j.rpemd.2022.10.880.
    10.24873/j.rpemd.2022.10.880
  17. Pedro Pereira; Luís Vilhena; Joaquim Sacramento; Ana Senos; Luís Malheiros; Amílcar Ramalho. "Influence of Different Binders and Severe Environmental Conditions on the Tribological and Electrochemical Behaviour of WC-Based Composites". Lubricants 10 7 (2022): 145-145. https://doi.org/10.3390/lubricants10070145.
    10.3390/lubricants10070145
  18. "Influence of abutment and connection type on implant-abutment connection rigidity: an in vitro study". The Portuguese Journal of Stomatology, Dental Medicine and Maxillofacial Surgery (2022):
    Em revisão
  19. Vilhena, Luís. "In Vitro Fatigue Analysis of Microgap at the Implant-Abutment Interface with Different Abutments and Connections". European Journal of Dentistry (2022):
    Em revisão
  20. Fernandes, Rui F.; de Jesus, Joel; Borrego, Luís; Vilhena, Luís; Ramalho, Amílcar; Ferreira, José A. M.. "Influence of Deposition Plane Angle and Saline Corrosion on Fatigue Crack Growth in Maraging Steel Components Produced by Laser Powder Bed Fusion". Metals 12 3 (2022): 433. http://dx.doi.org/10.3390/met12030433.
    10.3390/met12030433
  21. Vilhena, Luís; Domingues, Bruno; Fernandes, Cristina; Senos, Ana; Ramalho, Amílcar. "Mechanical and Tribological Characterization of WC-Co and WC-AISI 304 Composites by a Newly Developed Equipment". Materials 15 3 (2022): 1187. http://dx.doi.org/10.3390/ma15031187.
    10.3390/ma15031187
  22. Luis M. Vilhena; Cristina M. Fernandes; Joaquim Sacramento; Ana M. R. Senos; Amilcar Ramalho; Vilhena, Luís. "Sliding wear and friction behaviour of WC -stainless steel and WC–Co composites". Lubrication Science (2022): https://doi.org/10.1002/ls.1586.
    Publicado • 10.1002/ls.1586
  23. Vilhena, Luís; Ferreira, Fábio; Oliveira, João Carlos; Ramalho, Amílcar. "Rapid and Easy Assessment of Friction and Load-Bearing Capacity in Thin Coatings". Electronics 11 3 (2022): 296. http://dx.doi.org/10.3390/electronics11030296.
    10.3390/electronics11030296
  24. Pereira, P.; Vilhena, L.M.; Sacramento, J.; Senos, A.M.R.; Malheiros, L.F.; Ramalho, A.. "Tribological behaviour of different formulations of WC composites". Wear 506-507 (2022): http://www.scopus.com/inward/record.url?eid=2-s2.0-85134168457&partnerID=MN8TOARS.
    10.1016/j.wear.2022.204415
  25. Pereira, P.; Vilhena, L.M.; Sacramento, J.; Senos, A.M.R.; Malheiros, L.F.; Ramalho, A.. "Abrasive wear resistance of WC-based composites, produced with Co or Ni-rich binders". Wear 482-483 (2021): 203924. http://dx.doi.org/10.1016/j.wear.2021.203924.
    10.1016/j.wear.2021.203924
  26. Carneiro, Elsa Reis; Coelho, Ana Sofia; Amaro, Inês; Paula, Anabela Baptista; Marto, Carlos Miguel; Saraiva, José; Ferreira, Manuel Marques; et al. "Mechanical and Tribological Characterization of a Bioactive Composite Resin". Applied Sciences 11 17 (2021): 8256. http://dx.doi.org/10.3390/app11178256.
    10.3390/app11178256
  27. Vilhena, Luís. "Wear of titanium implant platforms with different abutment connections and abutment materials". International Journal of Oral and Maxillofacial Implants (2021):
    Em revisão
  28. Vilhena, Luís. "Study of the frictional behavior of soft contact lenses by an innovative method". Tribology International (2021): http://dx.doi.org/10.1016/j.triboint.2020.106633.
    10.1016/j.triboint.2020.106633
  29. Vilhena, Luís. "Desgaste de implantes com diferentes conexões e materiais de pilares: estudo in vitro". Revista Portuguesa de Estomatologia, Medicina Dentária e Cirurgia Maxilofacial 61 s1 (2020): http://dx.doi.org/10.24873/j.rpemd.2020.12.786.
    10.24873/j.rpemd.2020.12.786
  30. Vilhena, Luís M.; Shumayal, Ahmad; Ramalho, Amílcar; Ferreira, José António Martins. "Tribocorrosion Behaviour of Ti6Al4V Produced by Selective Laser Melting for Dental Implants". Lubricants 8 2 (2020): 22. http://dx.doi.org/10.3390/lubricants8020022.
    10.3390/lubricants8020022
  31. Vilhena, Luís. "Effect of artificial saliva on the fatigue and wear response of TiAl6V4 specimens produced by SLM". Procedia Structural Integrity 28 (2020): 790-795. http://dx.doi.org/10.1016/j.prostr.2020.10.092.
    10.1016/j.prostr.2020.10.092
  32. Luís Vilhena; Gifty Oppong; Amílcar Ramalho. "Tribocorrosion of different biomaterials under reciprocating sliding conditions in artificial saliva". Lubrication Science (2019): https://doi.org/10.1002/ls.1478.
    10.1002/ls.1478
  33. L. M. Vilhena; A. Ramalho. "Friction Behavior of Human Skin Rubbing against Different Textured Polymeric Materials Obtained by a 3D Printing Microfabrication Technique". Tribology Transactions (2019): 1-13. https://doi.org/10.1080/10402004.2018.1543782.
    10.1080/10402004.2018.1543782
  34. L. M. Vilhena; P. V. Antunes; A. Ramalho. "Galling characterization for the pair composed by aluminium and M2 steel under dry and lubricated conditions by using load-scanning test method". Journal of the Brazilian Society of Mechanical Sciences and Engineering 40 6 (2018): https://doi.org/10.1007/s40430-018-1188-3.
    10.1007/s40430-018-1188-3
  35. L.M. Vilhena; M. Sedlacek; B. Podgornik. "Answer to the discussion of the paper entitled surface texturing by pulsed Nd:YAG laser (L.M. Vilhena, M. Sedlacek, B. Podgornik, J. Vižintin, A. Babnik, and J. Možina, tribology international 42 (2009) 1496–1504)". Tribology International 118 (2018): 105-107. https://doi.org/10.1016%2Fj.triboint.2017.09.024.
    10.1016/j.triboint.2017.09.024
  36. Luís Vilhena; Marko Sedlacek; Bojan Podgornik; Zlatko Rek; Iztok Žun. "CFD Modeling of the Effect of Different Surface Texturing Geometries on the Frictional Behavior". Lubricants 6 1 (2018): 15-15. https://doi.org/10.3390/lubricants6010015.
    10.3390/lubricants6010015
  37. L. M. Vilhena; A. Ramalho; A. Cavaleiro. "Grooved surface texturing by electrical discharge machining (EDM) under different lubrication regimes". Lubrication Science (2017): https://doi.org/10.1002/ls.1383.
    10.1002/ls.1383
  38. Vilhena, Luís; Ramalho, Amílcar. "Friction of Human Skin against Different Fabrics for Medical Use". Lubricants 4 1 (2016): 6. http://dx.doi.org/10.3390/lubricants4010006.
    10.3390/lubricants4010006
  39. Vilhena, L.M.; Fernandes, C.M.; Soares, E.; Sacramento, J.; Senos, A.M.R.; Ramalho, A.. "Abrasive wear resistance of WC-Co and WC-AISI 304 composites by ball-cratering method". Wear 346-347 (2016): 99-107. http://www.scopus.com/inward/record.url?eid=2-s2.0-84947975771&partnerID=MN8TOARS.
    10.1016/j.wear.2015.11.005
  40. Fernandes, C.M.; Vilhena, L.M.; Pinho, C.M.S.; Oliveira, F.J.; Soares, E.; Sacramento, J.; Senos, A.M.R.. "Mechanical characterization of WC-10wt% AISI 304 cemented carbides". Materials Science and Engineering A 618 (2014): 629-636. http://www.scopus.com/inward/record.url?eid=2-s2.0-84908352095&partnerID=MN8TOARS.
    10.1016/j.msea.2014.09.064
  41. Podgornik, B.; Vilhena, L. M.; Sedlacek, M.; Rek, Z.; Žun, I.. "Effectiveness and design of surface texturing for different lubrication regimes". Meccanica 47 7 (2012): 1613-1622. http://dx.doi.org/10.1007/s11012-012-9540-7.
    10.1007/s11012-012-9540-7
  42. Sedlacek, Marko; Vilhena, Luis Miguel Silva; Podgornik, Bojan; Vižintin, Jože. "Surface Topography Modelling for Reduced Friction". Strojniški vestnik – Journal of Mechanical Engineering 57 09 (2011): 674-680. http://dx.doi.org/10.5545/sv-jme.2010.140.
    10.5545/sv-jme.2010.140
  43. Vilhena, L. M.; Podgornik, B.; Vižintin, J.; Možina, J.. "Influence of texturing parameters and contact conditions on tribological behaviour of laser textured surfaces". Meccanica 46 3 (2010): 567-575. http://dx.doi.org/10.1007/s11012-010-9316-x.
    10.1007/s11012-010-9316-x
  44. Vilhena, L.; Podgornik, B.; Milanovic, S.; Vižintin, J.. "Influence of heat treatment and machining parameters on residual stress field and wear of double-layer cast rolls". Strojniski Vestnik/Journal of Mechanical Engineering 56 4 (2010): 260-266. http://www.scopus.com/inward/record.url?eid=2-s2.0-77952747015&partnerID=MN8TOARS.
  45. Vilhena, L.M.; Sedlacek, M.; Podgornik, B.; Vižintin, J.; Babnik, A.; Možina, J.. "Surface texturing by pulsed Nd:YAG laser". Tribology International 42 10 (2009): 1496-1504. http://dx.doi.org/10.1016/j.triboint.2009.06.003.
    10.1016/j.triboint.2009.06.003
  46. Severo, V.; Vilhena, L.; Silva, P.N.; Dias, J.P.; Becker, D.; Wagner, S.; Cavaleiro, A.. "Tribological behaviour of W–Ti–N coatings in semi-industrial strip-drawing tests". Journal of Materials Processing Technology 209 10 (2009): 4662-4667. http://dx.doi.org/10.1016/j.jmatprotec.2008.11.040.
    10.1016/j.jmatprotec.2008.11.040
Capítulo de livro
  1. Luís Vilhena; Inês Francisco; Anabela Baptista Paula; Carlos Miguel Marto; Francisco Vale; Amílcar Ramalho. "Mechanical Characterization of Several Elastics Used in Orthodontics Subjected to Different Decay Conditions". 2023.
    10.1007/978-3-031-47790-4_32
  2. F. Q. Ramalho; M. L. Alves; M. S. Correia; L. M. Vilhena; A. Ramalho; Vilhena, Luís. "Study of Laser Metal Deposition (LMD) as a Manufacturing Technique in Automotive Industry". 2020.
    10.1007/978-3-030-29041-2_29
Pré-impressão
  1. Luís Vilhena; Amílcar Ramalho. "Effect of Protein (BSA) Content on the Frictional Behaviour of Soft Contact Lenses Using a Dynamic Oscillating Tribometer". 2024. https://doi.org/10.20944/preprints202404.0836.v1.
    10.20944/preprints202404.0836.v1
Relatório
  1. Vilhena, Luís. 2014. Electroplating on Titanium and Titanium alloys.
  2. Vilhena, Luís. 2014. Analyse de différents échantillons de C6F14.
  3. Vilhena, Luís. 2014. Current density distribution simulations for a copper electropolishing process including flow effects.
  4. Vilhena, Luís. 2010. Raziskava vpliva teksturiranja kontaktnih površin na tribološke lastnosti.
  5. Vilhena, Luís. 2009. Koeficient trenja pri tribološkem kontaktu gladke in teksturirane površine.
  6. Vilhena, Luís. 2009. Vpliv teksturiranja na koeficient trenja, ter strižno silo in razmere v oljnem filmu pri tribološkem kontaktu gladke in teksturirane površine.
Atividades

Orientação

Título / Tema
Papel desempenhado 		Curso (Tipo)
Instituição / Organização
2024/01/01 - Atual Experimental and Numerical Approaches for Optimizing the Design of WC Composites for Enhanced Wear Resistance Under Impact-Sliding Conditions
Orientador
Universidade de Coimbra, Portugal
2024/01/01 - Atual Tribological characterization of new highly conductive lubricants for Electrical vehicle’s (EV) in order to avoid strain currents
Orientador
Universidade de Coimbra, Portugal
2024/01/01 - Atual Investigate the lubricating properties of oil-based solutions containing nanoparticles as additive, especially graphene
Orientador
 Erasmus Mundus Joint European Master in Tribology of Surfaces and Interfaces (Mestrado)
Universidade de Coimbra, Portugal
2024/01/01 - Atual Investigate the lubricating properties of graphene-based paints as a sacrificial coating
Orientador
Universidade de Coimbra, Portugal
2024/01/01 - Atual Study of the fatigue resistance of graphene-coated electrical contact components for the automotive industry
Orientador
Universidade de Coimbra, Portugal
2024/01/01 - Atual Development of lubrication systems to improve the performance of mechanical components
Orientador
Universidade de Coimbra, Portugal
2024/01/01 - Atual Wear resistance of different tungsten carbide formulations for industrial applications
Orientador
Universidade de Coimbra, Portugal
2024/01/01 - Atual Optimize spare parts management in Maintenance - in cooperation with Bluepharma
Orientador
2024/01/01 - Atual Study of the lubrication capacity of coatings obtained by PVD (Chromium Nitride) with and without the addition of ionic liquids (IL)
Orientador
2024/01/01 - Atual Mechanical behavior of API 5LX X100 steel under the influence of hydrogen
Orientador
Universidade de Coimbra, Portugal
2023/01/01 - Atual Mechanical and Tribological Characterization of Carbon Fiber Reinforced Polymers (CFRP) used in modern aircraft, rockets and launchers
Orientador
 master’s in mechanical engineering (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2023/01/01 - Atual influence of irrigation during finishing and polishing procedures of composite resin
Orientador
 project investigation in Dental Medicine (Mestrado)
Universidade de Coimbra Faculdade de Medicina, Portugal
2023/01/01 - Atual Effect of protein/lipid content on the frictional behavior of soft contact lenses
Orientador
 Master in Biomedical Engineering - Biomaterials (Mestrado)
Universidade de Coimbra, Portugal
2022/01/01 - 2022/01/01 Study of the efficiency of the Cavitation process to evaluate the integrity of materials obtained by powder metallurgy and additive manufacturing
Orientador
 Erasmus Mundus Joint European Master in Tribology of Surfaces and Interfaces (Mestrado)
Universidade de Coimbra, Portugal
2022/01/01 - 2022/01/01 Comparative study of ceramic etching protocols for adhesive restorations
Orientador
 Master in Dental Medicine (Mestrado)
Universidade do Porto, Portugal
2021/01/01 - 2021/01/01 Study of the Tribocorrosion and strain hardening behaviour of CoCrMo alloys used in several biomedical applications
Orientador de Gonçalo Manuel Abrunhosa Coutinho
Master in Mechanical Engineering (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2019/01/01 - 2019/01/01 Mechanical and Tribological Characterization of Tungsten Carbide (WC) composites obtained by sintering
Orientador de Bruno Marques Domingues
 Master in Mechanical Engineering (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2019/01/01 - 2019/01/01 Study of the Cavitation-Erosion of materials obtained by sintering
Orientador de Daniel Borges Pinto
 Master in Mechanical Engineering (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2019/01/01 - 2019/01/01 Mechanical and Tribological characterization of WC composites with different binders
Orientador de Jorge Miguel Nobre Sequeira
 Master in Mechanical Engineering (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2019/01/01 - 2019/01/01 Development and optimization of a Bicycle Transmission Plate Wear Test
Orientador de Álvaro Manuel Monteiro Almeida
 Master in Mechanical Engineering (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2019/01/01 - 2019/01/01 Expedited evaluation of friction and support load in sputtered thin coatings
Orientador de Nuno Matos Costa
Master in Mechanical Engineering (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2018/01/01 - 2018/01/01 Tribocorrosion behaviour of biomedical materials used as implants under different contact conditions
Orientador de Gifty Oppong Boakye
 Erasmus Mundus Joint European Master in Tribology of Surfaces and Interfaces (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2018/01/01 - 2018/01/01 Characterisation in vitro of the frictional behavior of soft contact lenses under different contact conditions
Orientador de Ana Luísa da Silva Carvalho
 Master in Biomedical Engineering (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2018/01/01 - 2018/01/01 Tribocorrosion Analysis of Titanium alloys produced by Selective Laser Melting (SLM)
Orientador de Ahmad Shumayal
 Erasmus Mundus Joint European Master in Tribology of Surfaces and Interfaces (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2017/01/01 - 2017/01/01 Mechanical and tribological characterization of different papers used in everyday life situations like: toilet paper, paper napkins and paper towels
Orientador de Luís A. Pedrosa Afonso
 Master in Mechanical Engineering (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2016/01/01 - 2016/01/01 Effect of grooved surface texturing on the behaviour of lubricated contacts
Orientador de Khawaja Khalid Raza
 Erasmus Mundus Joint European Master in Tribology of Surfaces and Interfaces (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação) 		Instituição / Organização
2024/01/01 - Atual Participation as guest editor in a special issue of the Lubricants magazine dedicated to the topic of Advances in Ionic Liquids as New Lubricant Additives. (2024/01/01)
Outro
2023/01/01 - Atual The Regional College of Mechanical Engineering of the Order of Engineers, the Department of Mechanical Engineering (DEM) of the Faculty of Science and Technology of the University of Coimbra, the Research Center for Mechanical Engineering, Materials and Processes (CEMMPRE) and the Federal University of Rio Grande do Sul (PROMEC/UFRGS) promote on June 23, at 2:15 pm in the Auditorium of the DEM, Rua Luís Reis Santos, Pole II of the UC, the holding of a Seminar on Tribology: an experimental approach. Tribocorrosion – an introduction, Luís Vilhena (2023/01/01)
Conferência (Coorganizador)
 Universidade de Coimbra, Portugal

Júri de grau académico

Tema
Tipo de participação 		Nome do candidato (Tipo de grau)
Instituição / Organização
2024/01/01 Investigate the lubricating properties of oil-based solutions containing nanoparticles as additive, especially graphene
Orientador
 Barnabas, (Mestrado)
Universidade de Coimbra, Portugal
2024/01/01 Investigate the lubricating properties of graphene-based paints as a sacrificial coating
Orientador
 TSering (Mestrado)
Universidade de Coimbra, Portugal
2024/01/01 Study of the fatigue resistance of graphene-coated electrical contact components for the automotive industry
Orientador
 Diogo Antunes Rocha (Mestrado)
Universidade de Coimbra, Portugal
2024/01/01 Optimize spare parts management in Maintenance - in cooperation with Bluepharma
Orientador
 Luis Afonso Fernandes Simão Miranda (Mestrado)
Universidade de Coimbra, Portugal
2023/07/06 Determination of the Operation Condition of Lubricating Oils in Diesel Engines
Arguente principal
 Roney Camargo Malaguti (Doutoramento)
Universidade de Coimbra, Portugal
2023/01/01 Influence of irrigation during finishing and polishing procedures of composite resin
Orientador
 Rui Carvalho da Eira (Mestrado)
Universidade de Coimbra, Portugal
2023/01/01 Effect of Different Cavity Disinfectants on Adhesion to Dentin of Primary Teeth
Arguente principal
 Mariana Sofia Ruivo de Sousa Cordeiro (Mestrado)
Universidade de Coimbra, Portugal
2023/01/01 Mechanical and Tribological Characterization of Carbon Fiber Reinforced Polymers (CFRP) used in modern aircraft, rockets and launchers
Orientador
 André Garcia (Mestrado)
Universidade de Coimbra, Portugal
2023/01/01 Investigate the lubricating properties of graphene-based paints as a sacrificial coating
Orientador
 TSering (Mestrado)
Universidade de Coimbra, Portugal
2022/01/01 Biobased Lubricants with improved properties by polymer grafting
Arguente principal
 Diana Cristina Miguel Ribeiro (Outro)
Universidade de Coimbra Departamento de Engenharia Quimica, Portugal
2022/01/01 Study of the efficiency of the Cavitation process to evaluate the integrity of materials obtained by powder metallurgy and additive manufacturing
Orientador
 Stepan Bobrovnikov (Mestrado)
Universidade de Coimbra, Portugal
2022/01/01 Mechanical behaviour of 3D parts manufactured by additive processes
Orientador
 Pedro Jaime Luís Soares (Mestrado)
2022/01/01 Maintenance Planning and Preventive Maintenance in a Heavyweight paper production company
Arguente principal
 Cassandra Raquel Vieira Braz (Mestrado)
Universidade de Coimbra, Portugal
2022/01/01 Evaluation of the effect of different cavity disinfectants on dentin adhesion of permanent teeth
Arguente principal
 Maria da Glória Dias Antunes (Mestrado)
Universidade de Coimbra, Portugal
2022/01/01 Comparative study of ceramic etching protocols for adhesive restorations
Orientador
 Elsa Reis Carneiro (Mestrado)
Universidade do Porto, Portugal
2021/01/01 Bio-functionalization of tribocorrosion resistant ß type Ti-based hybrid surfaces
Arguente principal
 Ihsan Çaha (Doutoramento)
Universidade do Minho, Portugal
2021/01/01 Expedited evaluation of friction and support load in sputtered thin coatings (DLC, TiSiN and Cr)
Orientador
 Nuno Matos Costa (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2021/01/01 Study of the Tribocorrosion and strain hardening behaviour of CoCrMo alloys used in several biomedical applications
Orientador
 Gonçalo Manuel Abrunhosa Coutinho (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2020/01/01 Performance of Diamond like Carbon films (produced by innovative technology of Ne- HIPIMS) under different lubrication regimes
Arguente principal
 Fábio José Gouveia Cardoso (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2020/01/01 Study of the Cavitation-Erosion of materials obtained by sintering
Orientador
 Daniel Borges Pinto (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2020/01/01 Mechanical and Tribological characterization of WC composites with different binders
Orientador
 Jorge Miguel Nobre Sequeira (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2020/01/01 Development, and optimization of a Bicycle Transmission Plate Wear Test
Orientador
 Álvaro Manuel Monteiro Almeida (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2020/01/01 Mechanical and Tribological Characterization of Tungsten Carbide (WC) composites obtained by sintering
Orientador
 Bruno Marques Domingues (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2019/01/01 Improvement of the tribological performance of WSC coatings with the addition of fluor under dry and lubricated conditions
Arguente principal
 Ali Golhin (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2019/01/01 Tribocorrosion Analysis of Titanium alloys produced by Selective Laser Melting (SLM)
Orientador
 Ahmad Shumayal (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2018/01/01 Project thesis in Surface Engineering, PhD in Mechanical Engineering
Arguente principal
 Ana Teresa Gomes de Oliveira Manaia (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2018/01/01 TMD based sputtered coatings for contact with rubber
Arguente principal
 Ana Teresa Gomes de Oliveira Manaia (Outro)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2018/01/01 Tribocorrosion behaviour of biomedical materials used as implants under different contact conditions
Orientador
 Gifty Oppong Boakye (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2018/01/01 Characterisation in vitro of the frictional behavior of soft contact lenses under different contact conditions, 2018, master’s in biomedical engineering - Biomaterials, University of Coimbra, Portugal (jury participation: vowel).
Orientador
 Ana Luísa da Silva Carvalho (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2017/01/01 Kinesio Taping – Mechanical characterization of the Kinesio taping and study of the interface between the material and the skin
Arguente principal
 Nuno Rafael dos Santos Moura (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2017/01/01 Mechanical and tribological characterization of different papers used in everyday life situations like: toilet paper, paper napkins and paper towels
Orientador
 Luís A. Pedrosa Afonso (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2016/01/01 Friction of soft materials: influence of the texture of the counter-body
Arguente principal
 António Miguel Menezes de Almeida (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal
2015/01/01 Wear of tooth materials – Study of the influence of different abrasive solutions
Arguente principal
 Ricardo José Oliveira Silva (Mestrado)
Universidade de Coimbra Centro de Engenharia Mecânica Materiais e Processos, Portugal

Arbitragem científica em revista

Nome da revista (ISSN) Editora
2023/01/01 - Atual Frontiers in Coatings, Dyes and Interface Engineering - Interface Engineering Frontiers
2021/01/01 - Atual Lubricants - Topic Editor (MDPI) MDPI
2021/01/01 - Atual Materials - Topic Editor (MDPI) MDPI
2020/01/01 - Atual Smart Science Taylor & Francis Online
2019/01/01 - 2019/01/01 Smart Science Taylor & Francis Online

Curso / Disciplina lecionado

Disciplina Curso (Tipo) Instituição / Organização
2024/01/01 - Atual Industrial Maintenance (01017922), Graduation in Mechanical Engineering – LEM (2rd year, 2st semester, T+TP: 8h/week). (Licenciatura) Universidade de Coimbra, Portugal
2024/01/01 - Atual Mechanical Behavior of Materials (02010746), Master in Mechanical Engineering – MEM (1rd year, 1st semester, T+TP: 2h/ week). (Mestrado) Universidade de Coimbra, Portugal
2020/01/01 - Atual Vibrations and Noise Engenharia Mecânica (Mestrado integrado) Universidade de Coimbra, Portugal
2019/04/01 - Atual Mechanical characterization: a decisive factor in dental medicine research, introduction to dental medicine research course, XXVIII Annual Meeting of Dental Medicine, (RAMDEC 2019) (Curso de Especialização Tecnológica) Universidade de Coimbra Faculdade de Medicina, Portugal
2015/01/01 - Atual Technical Drawing II Engenharia Mecânica (Licenciatura) Instituto Politécnico de Tomar Escola Superior de Tecnologia de Abrantes, Portugal
2022/09/12 - 2022/12/17 Mechanical Behavior of Materials (02010746) – Chapter: Lubrication, Wear and Friction, Integrated Master in Mechanical Engineering – MIEM (3rd year, 1st semester, T+TP: 2h + 2 x 2h) Mechanical Engineering (Mestrado integrado) Universidade de Coimbra Departamento de Engenharia Mecânica, Portugal
2020/09/21 - 2020/12/18 Vibrations and Noise (01005913), Integrated Master in Mechanical Engineering – MIEM (4th year, 2nd semester, T+TP: 2h/week, 150 students) Mechanical Engineering (Mestrado integrado) Universidade de Coimbra Departamento de Engenharia Mecânica, Portugal

Expedição científica

Descrição da atividade Instituição / Organização
2006/12/01 - Atual IFU - Institute for Metal Forming Technology of University of Stuttgart: Strip Draw Test, Germany (December 2006).
2024/11/29 - 2024/12/07 Grant: Erasmus + ICM.UC (International Credit Mobility University of Coimbra) at Kasdi Merbah University, Ouargla, Algeria. - ICM.UC is a three-year project (2022-2025) coordinated by the University of Coimbra (UC), Portugal, gathering several higher education institutions from 5 countries (Albania, Kosovo | Georgia | Algeria, Palestine) belonging to 3 different regions (29 November to 7 December). Content of the teaching programme: • Introduction to Tribology: Friction, Wear, and Lubrication (8 hours):
2010/01/24 - 2010/02/13 SKF - Engineering and Research Centre, Nieuwegein, the Netherlands: Optical Interferometry (24 January to 13 February 2010).

Membro de comissão

Descrição da atividade
Tipo de participação 		Instituição / Organização
2024/01/01 - Atual National delegate of the Management Committee of COST Action on Ocean Tribology Centre (OTC) - (CA23155) - is to create a pan-European-wide network of countries with a strong offshore affiliation for promoting collaboration and knowledge sharing towards the development of sustainable, reliable and energy efficient ocean systems - The OTC Action brings together the leading competences of 41 individual participants from 33 different organisations. Proposers come from a variety of 16 different countries.
Coordenador

Revisão ad hoc de artigos em revista

Nome da revista (ISSN) Editora
2023/02/23 - Atual International Journal of Molecular Sciences MDPI
2018/12/05 - Atual Journal Materials and Technology
2018/05/07 - Atual Materials MDPI
2016/06/27 - Atual Surface Reviews and Letters
2023/04/30 - 2023/05/02 Materials Letters Elsevier
2023/04/17 - 2023/05/02 Journal of Materials Science Springer
2023/01/23 - 2023/05/02 Journal of Materials Research and Technology Elsevier
2023/01/09 - 2023/05/02 Journal of Functional Biomaterials MDPI
2023/01/03 - 2023/05/02 International Journal of Lightweight Materials and Manufacture KeAi
2022/12/14 - 2023/05/02 BMC Oral Health Springer Nature
2021/12/14 - 2023/05/02 Friction Springer
2021/12/02 - 2023/05/02 Proceedings of the Institution of Mechanical Engineers, Part H SAGE journals
2021/11/30 - 2023/05/02 Applied Science MDPI
2020/03/11 - 2023/05/02 Tribology Letters Springer
2018/10/19 - 2023/05/02 Coatings MDPI
2018/10/19 - 2023/05/02 Surface and Coatings Technology Elsevier
2018/09/17 - 2023/05/02 Lubricants MDPI
2018/03/28 - 2023/05/02 Recent Patents on Engineering
2018/03/05 - 2023/05/02 Wear Elsevier
2018/01/09 - 2023/05/02 Metals MDPI
2017/09/21 - 2023/05/02 Journal of Alloys and Compounds Elsevier
2017/08/12 - 2023/05/02 6th Global Conference on Materials Science and Engineering (CMSE 2017, Beijing, China
2016/12/30 - 2023/05/02 Frontiers in Physiology Editorial Office - Collaborative Peer Review Teamm - EPFL Innovation Square, Building I, Lausanne, Switzerland
2016/12/09 - 2023/05/02 Tribology in industry Journal of the Serbian Tribology Society
2016/10/11 - 2023/05/02 Wear of Materials 2017 Elsevier
2016/06/27 - 2023/05/02 Tribology International Elsevier
2016/05/31 - 2023/05/02 Indian Journal of Engineering and Materials Science IJEMS
2016/05/31 - 2023/05/02 Iranian Journal of Science and Technology, Transactions of Mechanical Engineering Springer
2016/03/09 - 2023/05/02 Materials Science and Technology Elsevier
2016/02/16 - 2023/05/02 Tribology Transactions Official Journal of the Society of Tribologists and Lubrication Engineers
2016/01/04 - 2023/05/02 Materials Research ScholarOne
2015/09/07 - 2023/05/02 Lubrication Science Wiley
2014/12/09 - 2023/05/02 Journal of Tribology The American Society of Mechanical Engineers
Distinções

Prémio

2024 5th edition of the Interdisciplinary Research Seed Projects
Universidade de Coimbra, Portugal
2023 Honorable mention in the research category (2nd place) XXXII Annual Meeting of Dentistry and Stomatology of Coimbra at Research Category
Universidade de Coimbra Faculdade de Medicina, Portugal
2022 Award for the best research work at the XXXI Annual Meeting of Dentistry and Stomatology of Coimbra
Universidade de Coimbra Faculdade de Medicina, Portugal
2022 Best translational research project, awarded by the Innovation and Development Unit (UID)
Centro Hospitalar e Universitário de Coimbra EPE, Portugal
2020 Award for the best Research work presented to the congress of the Portuguese Society of Stomatology and Dentistry SPEMD2020

Outra distinção

2018 The paper Surface texturing by pulsed Nd:YAG laser, Tribology International, Volume 42, Issue 10, October 2009, Pages 1496-1504. was ranked amongst the top 10 (3rd) of the most cited articles in the scientific journal Tribology International, 2009-2014