Artigo em conferência |
- R.F. Fernandes; J.S. Jesus; L. Borrego; J.A.M. Ferreira; R. Branco; J.D.M. Costa. "Effect of heat treatment on fatigue performance
of notched and unnotched samples of AlSi10Mg manufactured by LPBF under variable loading amplitudes". 2024.
10.1016/j.prostr.2024.01.018
- R.F. Fernandes; J.S. Jesus; L.P. Borrego; J.A.M. Ferreira; J.D. Costa. "Notch effect on the fatigue behaviour of AlSi10Mg
aluminium alloy obtained by additive manufacturing". 2024.
10.1016/j.prostr.2024.01.087
- Fernandes, Rui F.; J.S. Jesus; BORREGO, LUÍS FILIPE; Ferreira, José AM; COSTA, JDM. "Fatigue crack propagation of LPBF Maraging
Steel with different deposition orientations". Trabalho apresentado em 5th Iberian Conference on Structural Integrity,
Coimbra, 2022.
Aceite para publicação
- Fernandes, Rui F.; J.S. Jesus; Branco, Ricardo; BORREGO, LUÍS FILIPE; Ferreira, José AM; COSTA, JDM. "Influence of the heat
treatment on fatigue behaviour of AlSi10Mg Aluminium alloy submitted to Laser Powder Bed Fusion". Trabalho apresentado em
5th Iberian Conference on Structural Integrity, Coimbra, 2022.
Aceite para publicação
- "Prediction of multiaxial fatigue life of notched maraging steel components manufactured by selective laser melting". 2022.
10.1016/j.prostr.2022.03.097
- "Overloading effect on transient fatigue crack growth of Ti-6Al-4V parts produced by Laser Powder Bed Fusion". 2022.
10.1016/j.prostr.2022.01.092
- "Cyclic deformation behaviour of AlSi10Mg aluminium alloy manufactured by laser-beam powder bed fusion". 2022.
10.1016/j.prostr.2022.01.110
- Rui F. Fernandes; Joel Jesus; Luís Borrego; José M. Ferreira; José D. Costa. "Effect of heat treatment on fatigue crack growth
performance of AlSi10Mg aluminum alloy submitted to LPBF". 2022.
10.1016/j.prostr.2022.12.133
- Jesus, Joel. "Effect of artificial saliva on the fatigue and wear response of TiAl6V4 specimens produced by SLM". 2020.
https://doi.org/10.1016/j.prostr.2020.10.092
- L. Borrego; Jesus, J.S.; Ferreira, J.A.M.; Costa, J.D.; Capela, C.. "Fatigue crack growth of TiAl6V4 parts produced by SLM
under biaxial mode I/mode II loading". 2020.
10.1016/j.prostr.2021.12.019
- Borrego, L.P.; Jesus, J.S.; Ferreira, J.A.M.; Costa, J.D.; Capela, C.. "Fatigue crack growth of TiAl6V4 parts produced by
SLM under biaxial mode I/mode II loading". 2020.
10.1016/j.prostr.2021.12.019
- Jesus, Joel; Neto, DM; Fernandes, RF; Borges, MF; Antunes, FV; Sérgio, ER. "Effect of remaining ligament on fatigue crack
growth". 2020.
10.1016/j.prostr.2021.10.066
- Borrego, L.P.; De Jesus, J.; Ferreira, J.A.M.; Costa, J.D.M.; Capela, C.. "Assessment of the fatigue performance of heat-treated
addictive manufactured TiAl6V4 specimens". 2019.
10.1016/j.prostr.2019.08.212
- Jesus, J.S.; Gruppelaar, M.; Costa, J.M.; Loureiro, A.; Ferreira, J.A.M.. "Effect of geometrical parameters on Friction Stir
Welding of AA 5083-H111 T-joints". 2016.
10.1016/j.prostr.2016.02.033
|
Artigo em revista |
- Joel Alexandre da Silva de Jesus; J.A.M. Ferreira; Carlos Capela; COSTA JDM; Borrego, L. P.. "Physical Simulation of Mold
Steels Repaired by Laser Beam Fusion Deposition". Metals (2024): http://dx.doi.org/10.3390/met14060663.
10.3390/met14060663
- Rui Filipe Fernandes; J.S. Jesus; Borrego, L. P.; J.A.M. Ferreira; R. Branco; José D. Costa; António Castanhola Batista; Maria
José Marques; Joel Alexandre da Silva de Jesus. "Failure analysis of fatigue crack propagation in specimens of AlSi10Mg aluminum
alloy produced by L-PBF: Effect of different heat treatments". Engineering Failure Analysis (2024): http://dx.doi.org/10.1016/j.engfailanal.2024.108595.
10.1016/j.engfailanal.2024.108595
- Rui Filipe Fernandes; Joel S. Jesus; Luis P. Borrego; José A.M. Ferreira; Diogo Neto; Ricardo Branco; José D. Costa. "“Notch
sensitivity and heat treatment effect on the fatigue behaviour of AlSi10Mg aluminium alloy processed by additive manufacturing”".
Theoretical and Applied Fracture Mechanics (2024): http://dx.doi.org/10.1016/j.tafmec.2024.104553.
10.1016/j.tafmec.2024.104553
- Wojciech Macek; Ricardo Branco; Joel de Jesus; José Domingos Costa; Shun-Peng Zhu; Reza Masoudi Nejad; Andrew Gryguc. "Strain
energy density and entire fracture surface parameters relationship for LCF life prediction of additively manufactured 18Ni300
steel". International Journal of Damage Mechanics (2024): https://doi.org/10.1177/10567895241245879.
10.1177/10567895241245879
- D.M. Neto; S. Hajli; Edmundo Sérgio; L. Borrego; Joel Alexandre da Silva de Jesus; Fernando Antunes; Grzegorz Glinka. "Fatigue
crack growth in AA6082-T6/AA7050-T6 bi-materials: Effect of plastic zone ahead of crack tip". International Journal of
Fatigue (2024): http://dx.doi.org/10.1016/j.ijfatigue.2024.108423.
10.1016/j.ijfatigue.2024.108423
- Bruno Pedrosa; Carlos Rebelo; Iara Gripp Oliveira; Joel de Jesus; Juan Pardal; José Correia. "Dislocation density-based fatigue
approach for structural steel details". Structures (2024): http://dx.doi.org/10.1016/j.istruc.2023.105825.
10.1016/j.istruc.2023.105825
- Micael F. Borges; Fernando V. Antunes; Joel Jesus; Ricardo Branco; Pedro Prates; Diogo M. Neto. "Effect of L-T and S-T orientations
on fatigue crack growth in an aluminum 7050-T7451 plate". Fatigue & Fracture of Engineering Materials & Structures
(2023): http://dx.doi.org/10.1111/ffe.14067.
10.1111/ffe.14067
- D.M. Neto; N. Cavaleiro; E.R. Sérgio; J. Jesus; A. Camacho-Reyes; F.V. Antunes. "Effect of crack flank holes on fatigue crack
growth". International Journal of Fatigue (2023): https://doi.org/10.1016/j.ijfatigue.2023.107505.
10.1016/j.ijfatigue.2023.107505
- "Influence of specimen orientation on fatigue crack growth in 7050-T7451 and 2050-T8 aluminium alloys". International Journal
of Fatigue 164 (2022): 107136-107136. http://dx.doi.org/10.1016/j.ijfatigue.2022.107136.
10.1016/j.ijfatigue.2022.107136
- "On the use of the cumulative strain energy density for fatigue life assessment in advanced high-strength steels". International
Journal of Fatigue 164 (2022): 107121-107121. http://dx.doi.org/10.1016/j.ijfatigue.2022.107121.
10.1016/j.ijfatigue.2022.107121
- "“Influence of post-processing heat treatment on the cyclic deformation behaviour of AlSi10Mg aluminium alloy subjected to
laser powder bed fusion”". International Journal of Fatigue (2022): 107157-107157. http://dx.doi.org/10.1016/j.ijfatigue.2022.107157.
10.1016/j.ijfatigue.2022.107157
- Jesus, J.S.; Borrego, L.P.; Ferreira, J.A.M.; Costa, J.D.; Batista, A.C.; Capela, C.. "Fatigue crack growth in Ti-6Al-4V specimens
produced by Laser Powder Bed Fusion and submitted to Hot Isostatic Pressing". Theoretical and Applied Fracture Mechanics
118 (2022): 103231. http://dx.doi.org/10.1016/j.tafmec.2021.103231.
10.1016/j.tafmec.2021.103231
- "Fatigue crack growth under mixed mode I + II in Ti-6Al-4V specimens produced by Laser powder Bed fusion". Engineering
Fracture Mechanics 264 (2022): 108327-108327. http://dx.doi.org/10.1016/j.engfracmech.2022.108327.
10.1016/j.engfracmech.2022.108327
- "Influence of Deposition Plane Angle and Saline Corrosion on Fatigue Crack Growth in Maraging Steel Components Produced by
Laser Powder Bed Fusion". Metals 12 3 (2022): 433-433. http://dx.doi.org/10.3390/met12030433.
10.3390/met12030433
- Patricio G. Riofrío; Joel de Jesus; José A. M. Ferreira; Carlos Capela. "Influence of Local Properties on Fatigue Crack Growth
of Laser Butt Welds in Thin Plates of High-Strength Low-Alloy Steel". Applied Sciences 11 16 (2021): 7346-7346. https://doi.org/10.3390/app11167346.
10.3390/app11167346
- Luís Santos; Joel de de Jesus; Luís Borrego; José A. M. Ferreira; Rui F. Fernandes; José D. M. da da Costa; Carlos Capela.
"Fatigue Behavior of Hybrid Components Containing Maraging Steel Parts Produced by Laser Powder Bed Fusion". Metals
(2021): https://doi.org/10.3390/met11050835.
10.3390/met11050835
- J.S. Jesus. "Mechanisms of fatigue crack growth in Ti-6Al-4V alloy subjected to single overloads". Theoretical and Applied
Fracture Mechanics (2021): 103024-103024. http://dx.doi.org/10.1016/j.tafmec.2021.103024.
10.1016/j.tafmec.2021.103024
- J. S. Jesus; L. P. Borrego; J. A. M. Ferreira; J. D. Costa; C. Capela. "Fatigue behavior of Ti6Al4V alloy components manufactured
by selective laser melting subjected to hot isostatic pressing and residual stress relief". Fatigue & Fracture of Engineering
Materials & Structures (2021): https://doi.org/10.1111/ffe.13450.
10.1111/ffe.13450
- Joel de Jesus; Micael Borges; Fernando Antunes; José Ferreira; Luis Reis; Carlos Capela. "A Novel Specimen Produced by Additive
Manufacturing for Pure Plane Strain Fatigue Crack Growth Studies". Metals 11 3 (2021): 433-433. https://doi.org/10.3390/met11030433.
10.3390/met11030433
- Joel de Jesus; José António Martins Ferreira; Luís Borrego; José D. Costa; Carlos Capela. "Fatigue Failure from Inner Surfaces
of Additive Manufactured Ti-6Al-4V Components". Materials (2021): https://doi.org/10.3390/ma14040737.
10.3390/ma14040737
- Jesus, Joel. "Numerical Prediction of the Fatigue Crack Growth Rate in SLM Ti-6Al-4V Based on Crack Tip Plastic Strain". Metals
(2020):
10.3390/met10091133
- Jesus, Joel. "“Fatigue crack growth under corrosive environments of Ti-6Al-4V specimens produced by SLM”". Engineering
Failure Analysis (2020): http://dx.doi.org/10.1016/j.engfailanal.2020.104852.
10.1016/j.engfailanal.2020.104852
- J. S. Jesus; L. P. Borrego; J. A. M. Ferreira; J. D. Costa; C. Capela. "Fatigue crack growth behaviour in Ti6Al4V alloy specimens
produced by selective laser melting". International Journal of Fracture (2020): https://doi.org/10.1007/s10704-019-00417-2.
10.1007/s10704-019-00417-2
- Jesus, Joel. "Effect of bead characteristics on the fatigue life of shot peened Al 7475-T7351 specimens". International
Journal of Fatigue (2020): http://dx.doi.org/10.1016/j.ijfatigue.2020.105521.
10.1016/j.ijfatigue.2020.105521
- Jesus, Joel. "Fatigue Crack Growth in Maraging Steel Obtained by Selective Laser Melting". Applied Sciences (2019):
http://dx.doi.org/10.3390/app9204412.
10.3390/app9204412
- Jesus, Joel. "Effect of heat treatment on the fatigue crack growth behaviour in additive manufactured AISI 18Ni300 steel".
(2019): http://dx.doi.org/10.1016/j.tafmec.2019.04.005.
10.1016/j.tafmec.2019.04.005
- Jesus, Joel. "Fatigue crack propagation along interfaces of selective laser melting steel hybrid parts". Fatigue & Fracture
of Engineering Materials & Structures (2019): http://dx.doi.org/10.1111/ffe.13072.
10.1111/ffe.13072
- Jesus, Joel. "Response of fabric insert injection overmolding PP based composites subjected to single and muti-impact". Frattura
ed Integrità Strutturale (2019): http://doi.org/10.3221/IGF-ESIS.48.25.
10.3221/IGF-ESIS.48.25
- Jesus, Joel. "Effect of machining parameters on the mechanical properties of high dosage short –carbon- fiber reinforced composites".
Frattura ed Integrità Strutturale (2019): http://doi.org/10.3221/IGF-ESIS.48.26.
10.3221/IGF-ESIS.48.26
- Jesus, Joel. "Environmental effect on the fatigue crack propagation of AM TiAl6V4 alloy specimens". Procedia Structural
Integrity (2019): http://dx.doi.org/10.1016/j.prostr.2019.08.075.
10.1016/j.prostr.2019.08.075
- Jesus, Joel. "Fatigue behaviour of maraging steel samples produced by SLM under constant and variable amplitude loading".
Procedia Structural Integrity 22 (2019): 10-16. http://dx.doi.org/10.1016/j.prostr.2020.01.002.
10.1016/j.prostr.2020.01.002
- Luis M. S. Santos; Joel Alexandre da Silva de Jesus; J.A.M. Ferreira; COSTA JDM; Carlos Capela. "Fracture Toughness of Hybrid
Components with Selective Laser Melting 18Ni300 Steel Parts". Applied Sciences (2018): http://www.mdpi.com/2076-3417/8/10/1879.
10.3390/app8101879
- Jesus, J.S.; Costa, J.M.; Loureiro, A.; Ferreira, J.M.. "Assessment of friction stir welding aluminium T-joints". Journal
of Materials Processing Technology 255 (2018): 387-399. http://www.scopus.com/inward/record.url?eid=2-s2.0-85039866531&partnerID=MN8TOARS.
10.1016/j.jmatprotec.2017.12.036
- Jesus, Joel. "A study of fatigue notch sensibility on titanium alloy TiAl6V4 parts manufactured by selective laser melting".
Procedia Structural Integrity (2018): http://dx.doi.org/10.1016/j.prostr.2018.12.186.
10.1016/j.prostr.2018.12.186
- Jesus, J.S.; Costa, J.M.; Loureiro, A.; Ferreira, J.M.. "Fatigue strength improvement of GMAW T-welds in AA 5083 by friction-stir
processing". International Journal of Fatigue 97 (2017): 124-134. http://www.scopus.com/inward/record.url?eid=2-s2.0-85007487814&partnerID=MN8TOARS.
10.1016/j.ijfatigue.2016.12.034
- Santos, L.M.S.; Ferreira, J.A.M.; Jesus, J.S.; Costa, J.M.; Capela, C.. "Fatigue behaviour of selective laser melting steel
components". Theoretical and Applied Fracture Mechanics 85 (2016): 9-15. http://www.scopus.com/inward/record.url?eid=2-s2.0-84991244856&partnerID=MN8TOARS.
10.1016/j.tafmec.2016.08.011
- J.A.M. Ferreira; L.M.S. Santos; J. da Silva; J.M. Costa; C. Capela. "Assessment of the fatigue life on functional hybrid laser
sintering steel components". Procedia Structural Integrity 1 (2016): 126-133. https://doi.org/10.1016%2Fj.prostr.2016.02.018.
10.1016/j.prostr.2016.02.018
- Borrego, L.P.; Costa, J.D.; Jesus, J.S.; Loureiro, A.R.; Ferreira, J.M.. "Fatigue life improvement by friction stir processing
of 5083 aluminium alloy MIG butt welds". Theoretical and Applied Fracture Mechanics 70 (2014): 68-74. http://www.scopus.com/inward/record.url?eid=2-s2.0-84903752947&partnerID=MN8TOARS.
10.1016/j.tafmec.2014.02.002
- Costa, J.D.M.; Jesus, J.S.; Loureiro, A.; Ferreira, J.A.M.; Borrego, L.P.. "Fatigue life improvement of mig welded aluminium
T-joints by friction stir processing". International Journal of Fatigue 61 (2014): 244-254. http://www.scopus.com/inward/record.url?eid=2-s2.0-84893739435&partnerID=MN8TOARS.
10.1016/j.ijfatigue.2013.11.004
- De Jesus, J.S.; Loureiro, A.; Costa, J.M.; Ferreira, J.M.. "Effect of tool geometry on friction stir processing and fatigue
strength of MIG T welds on Al alloys". Journal of Materials Processing Technology 214 11 (2014): 2450-2460. http://www.scopus.com/inward/record.url?eid=2-s2.0-84902835447&partnerID=MN8TOARS.
10.1016/j.jmatprotec.2014.05.012
- da Silva, J.; Costa, J.M.; Loureiro, A.; Ferreira, J.M.. "Fatigue behaviour of AA6082-T6 MIG welded butt joints improved by
friction stir processing". Materials and Design 51 (2013): 315-322. http://www.scopus.com/inward/record.url?eid=2-s2.0-84877797868&partnerID=MN8TOARS.
10.1016/j.matdes.2013.04.026
|
Capítulo de livro |
- R. Branco; J.D. Costa; J.A. Martins Ferreira; J. Jesus; L. Borrego; Filippo Berto. "Low-cycle fatigue of additive manufactured
metals". 2024.
10.1016/b978-0-323-91204-4.00010-1
- Jesus, Joel. "A Study of the Shot Peening Effect on the Fatigue Life Improvement of Al 7475-T7351 3PB Specimens". 2019.
10.1007/978-3-030-13980-3_43
|
Livro |
- Nobre, J.P.; Batista, A.C.; Kornmeier, J.R.; Costa, J.D.; Loureiro, A.; Jesus, J.S.. Neutron and X-ray diffraction residual
stress measurements in aluminium alloys MIG welded T-joints after friction stir processing. 2014.
10.4028/www.scientific.net/AMR.996.439
|