???global.info.a_carregar???
Dr Diogo Montalvão is Deputy Head of Department and Principal Academic in the Department of Design & Engineering. He is also an Editor for Heliyon, an open-access Elsevier journal. As a Mechanical Engineer, he has been developing his career both with industry and academia, being involved in several interdisciplinary research projects and having presented one chapter in a book and over sixty publications. Diogo started his career in the Rolling Stock industry at ADtranz and Bombardier Transportation. After completing his PhD (Structural Health Monitoring in Composite Structures), he was appointed a one-year Professorship in the MIT-Portugal Doctoral program in Engineering Design and Advanced Manufacturing. He supervised a KTP project on Balance of Plant of Hydrogen Fuel Cells (Euro-Energy Solutions) and participated in the qualifying tests of the windward assembly of the Intermediate eXperimental Vehicle (IXV) for SPS (Snecma Propulsion Solide, SAFRAN group) in a project led by TAS-I (Thales Alenia Space Italia). In a project for OGMA (Portuguese Aeronautic Industry), he was responsible for the vibration analysis and re-design of a structural modification on a C-130 aircraft. Diogo is an experienced user of CAD/CAE software, namely Solidworks, CATIA, LabVIEW and ANSYS. More recently, he concluded an Executive MBA at the Hertfordshire Business School (with Distinction). Diogo also acted as Student Rep, which got him involved with the (successful) programme accreditation by the AMBA. Finally, Diogo led the Programme Development Team for the new General Transition Masters in Engineering at the University of Hertfordshire, which was successfully validated and approved in July 2016. This broad range of experience contributed to the success in his roles, which achievements were already recognised with a number of awards.
Read full resume ↓
Identification

Personal identification

Full name
Diogo Coelho de Carvalho Montalvão e Silva

Citation names

  • Montalvao, Diogo

Author identifiers

Ciência ID
0412-999D-5548
ORCID iD
0000-0003-1108-0475

Knowledge fields

  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Mechanical Engineering
  • Engineering and Technology - Mechanical Engineering

Languages

Language Speaking Reading Writing Listening Peer-review
Portuguese Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
English Advanced (C1) Advanced (C1) Advanced (C1) Advanced (C1)
French Beginner (A1) Intermediate (B1) Beginner (A1) Beginner (A1)
Spanish; Castilian Intermediate (B1) Advanced (C1) Intermediate (B1)
Italian Beginner (A1) Beginner (A1) Beginner (A1)
Education
Degree Classification
2016/09
Concluded
 Executive Master of Business Administration (Master)
University of Hertfordshire Business School, United Kingdom
"Investment Evaluation on Setting up a Dental Practice in the UK" (THESIS/DISSERTATION)
 Distinction
2010/02/09
Concluded
 Doutoramento em Engenharia Mecânica (Doutoramento)
Universidade de Lisboa, Portugal
"A Modal-based Contribution to Damage Location in Laminated Composite Plates" (THESIS/DISSERTATION)
 Approved by unanimous decision of the jury.
2010/02/09
Concluded
 Engenharia Mecânica (Doutoramento)
Major in Sem especialidade
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Detecção de Dano em Materiais Compostos por Técnicas de Análise Modal" (THESIS/DISSERTATION)
2003/10/29
Concluded
 Mestrado em Engenharia Mecânica (Mestrado)
Universidade de Lisboa, Portugal
"Determination of Rotational Terms of the Dynamic Response by means of Modal Analysis Tecnhiques" (THESIS/DISSERTATION)
 Approved by unanimous decision of the jury. Had 5/
2001/09/14
Concluded
 Licenciatura em Engenharia Mecânica (Licenciatura)
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Contribution to the Development of a Maintenance and Exploitation System of Rail Vehicles" (THESIS/DISSERTATION)
 Good (14/20). Had 19/20 and 20/20 marks in the fin
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2017/06/12 - Current Associate Professor (University Teacher) Bournemouth University Design and Engineering, United Kingdom
2016/08/15 - 2017/06/11 Assistant Professor (University Teacher) Bournemouth University, United Kingdom
Bournemouth University, United Kingdom
2010/05/14 - 2010/08/31 Adjunct Teacher (Polytechnic Teacher) Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2001/10/09 - 2004/10/08 Invited Assistant (Polytechnic Teacher) Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal

Positions / Appointments

Category
Host institution 		Employer
2017/01/01 - 2019/08/31 President of the Pedagogic Council Bournemouth University, United Kingdom

Others

Category
Host institution 		Employer
2019/09/01 - Current Deputy Head of Department of Design and Engineering Bournemouth University, United Kingdom
2012/01/03 - 2016/08/14 Senior Lecturer MSc Deputy Programme Tutor Programme Development Team Leader of the General Transition Masters in Engineering University of Hertfordshire, United Kingdom
2011/08/31 - 2011/12/31 Assistant Professor (Professor Adjunto) Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2010/09/01 - 2011/08/30 MIT Portugal Professorship as an Assistant Professor (Professor Auxiliar Convidado). Universidade de Lisboa Instituto Superior Técnico, Portugal
2004/10/09 - 2010/05/13 Teaching Assistant with MSc (Equiparado a Assistente do 2.º triénio com Mestrado) Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
2005/11/30 - 2010/02/09 PhD student (with scholarship) Universidade de Lisboa Instituto Superior Técnico, Portugal
2005/11/01 - 2009/08/31 Member of the "Assembleia do Instituto Politécnico de Setúbal" Instituto Politécnico de Setúbal, Portugal
2004/04/01 - 2007/01/31 Member of the Pedagogic Committee for the Production and Mechanical Engineering degree Cooperated with the Committee for the Mechanical Engineering Degrees Adaptation within the Bologna Process (Bach Instituto Politécnico de Setúbal Escola Superior de Tecnologia de Setúbal, Portugal
1999/09/28 - 2001/09/28 Industrial Trainee MIIT - Manutenção Industrial Informatizada e Tecnologia, Portugal
Projects

Grant

Designation Funders
2005/11/15 - 2010/02/09 A Modal-based Contribution to Damage Location in Laminated Composite Plates
SFRH/BD/27329/2006
PhD Student Fellow
Universidade de Lisboa Instituto Superior Técnico, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
Outputs

Publications

Book
  1. Maia, N.M.M.; Ribeiro, A.M.R.; Fontul, M.; Montalvão, D.; Sampaio, R.P.C.. Using the Detection and Relative Damage Quantification Indicator (DRQ) with transmissibility. 2007.
    10.4028/0-87849-444-8.455
Conference paper
  1. Montalvao, D.; Dupac, M.. "Students' views and correlation regarding performance and attendance for a first year Engineering cohort". 2018.
    10.1109/CISPEE.2018.8593445
  2. Montalvão, D.; Dupac, M.; Amafabia, D.-A.M.; David-West, O.; Haritos, G.. "On reducing uncertainty on the Elliptical Plane modal identification method". 2018.
    10.1051/matecconf/201821106001
  3. Montalvão, D.; Amafabia, D.M.; Silva, J.M.M.. "And yet another method for the identification of modal constants in Experimental Modal Analysis". 2017.
  4. Carvalho, A.; Freitas, M.; Reis, L.; Montalvão, D.; Fonte, M.. "Rotary Fatigue Testing to Determine the Fatigue Life of NiTi alloy Wires: An Experimental and Numerical Analisys". 2016.
    10.1016/j.prostr.2016.02.006
  5. Carvalho, A.; Freitas, M.; Reis, L.; Montalvao, D.; Fonte, M.. "Rotary Fatigue Testing Machine to Determine the Fatigue Life of NiTi alloy Wires and Endondontic Files". 2015.
    10.1016/j.proeng.2015.08.098
  6. Lage, Y.; Ribeiro, A.M.R.; Montalvão, D.; Reis, L.; Freitas, M.. "Automation in strain and temperature control on VHCF with an ultrasonic testing facility". 2014.
    10.1520/STP157120130079
  7. Montalvão, D.; Silva, J.M.M.. "A contribution to the modal identification of the damping factor based on the dissipated energy". 2014.
  8. Montalvão, D.; Ribeiro, A.M.R.; Maia, N.M.M.; Duarte Silva, J.; Cláudio, R.A.. "Damping measurements on a carbon fibre reinforced laminate". 2006.
  9. Montalvão, D.; Ribeiro, A.M.R.; Maia, N.M.M.; Silva, J.M.M.. "On the estimation of rotational frequency response functions". 2004.
Journal article
  1. Pedro R. Costa; Diogo Montalvão; Manuel Freitas; Richard Baxter; Luis Reis. "Cruciform specimens' experimental analysis in ultrasonic fatigue testing". Fatigue & Fracture of Engineering Materials & Structures 42 11 (2019): 2496-2508. https://doi.org/10.1111/ffe.13041.
    10.1111/ffe.13041
  2. Gilles Tchana Toffe; Sikiru Oluwarotimi Ismail; Diogo Montalvão; Jason Knight; Guogang Ren. "A Scale-up of Energy-Cycle Analysis on Processing Non-Woven Flax/PLA Tape and Triaxial Glass Fibre Fabric for Composites". Journal of Manufacturing and Materials Processing (2019): https://doi.org/10.3390/jmmp3040092.
    10.3390/jmmp3040092
  3. Daerefa-a Mitsheal Amafabia; Diogo Montalvão; Opukuro David-West; George Haritos. "Elliptical Method for Damage Identification in Carbon Fibre Reinforced Polymer Laminates". Advances in Materials Science and Engineering (2019): https://doi.org/10.1155/2019/5237129.
    10.1155/2019/5237129
  4. Montalvão, D.; Amafabia, D.-A.M.. "An alternative representation of the receptance: The ‘elliptical plane’ and its modal properties". Mechanical Systems and Signal Processing 103 (2018): 236-249. http://www.scopus.com/inward/record.url?eid=2-s2.0-85033575508&partnerID=MN8TOARS.
    10.1016/j.ymssp.2017.10.012
  5. Sutharssan, T.; Montalvao, D.; Chen, Y.K.; Wang, W.-C.; Pisac, C.; Elemara, H.. "A review on prognostics and health monitoring of proton exchange membrane fuel cell". Renewable and Sustainable Energy Reviews 75 (2017): 440-450. http://www.scopus.com/inward/record.url?eid=2-s2.0-85006293444&partnerID=MN8TOARS.
    10.1016/j.rser.2016.11.009
  6. Ihracska, B.; Crookes, R.J.; Montalvão, D.; Herfatmanesh, M.R.; Peng, Z.; Imran, S.; Korakianitis, T.. "Opto-mechanical design for sight windows under high loads". Materials and Design 117 (2017): 430-444. http://www.scopus.com/inward/record.url?eid=2-s2.0-85009089449&partnerID=MN8TOARS.
    10.1016/j.matdes.2016.12.080
  7. Montalvão, D.; Baker, T.; Ihracska, B.; Aulaqi, M.. "A generalised multiple-mass based method for the determination of the live mass of a force transducer". Mechanical Systems and Signal Processing 83 (2017): 506-521. http://www.scopus.com/inward/record.url?eid=2-s2.0-84979651418&partnerID=MN8TOARS.
    10.1016/j.ymssp.2016.06.028
  8. Amafabia, D.M.; Montalvao, Diogo; David-West, O.; Haritos, G.. "A Review of Structural Health Monitoring Techniques as Applied to Composite Structures". Structural Durability & Health Monitoring 11 2 (2017): 91-147. http://www.techscience.com/sdhm/v11n2/35277.
    Open access • Published
  9. Montalvão, D.; Wren, A.. "Redesigning axial-axial (biaxial) cruciform specimens for very high cycle fatigue ultrasonic testing machines". Heliyon 3 11 (2017): http://www.scopus.com/inward/record.url?eid=2-s2.0-85035116020&partnerID=MN8TOARS.
    10.1016/j.heliyon.2017.e00466
  10. Amafabia, D.-A.M.; Montalvão, D.; David-West, O.; Haritos, G.. "A review of structural health monitoring techniques as applied to composite structures". SDHM Structural Durability and Health Monitoring 11 2 (2017): 91-147. http://www.scopus.com/inward/record.url?eid=2-s2.0-85041813437&partnerID=MN8TOARS.
    10.3970/sdhm.2017.011.091
  11. Carvalho, A.; Montalvão, D.; Freitas, M.; Reis, L.; Fonte, M.. "Determination of the rotary fatigue life of NiTi alloy wires". Theoretical and Applied Fracture Mechanics 85 (2016): 37-44. http://www.scopus.com/inward/record.url?eid=2-s2.0-84991277666&partnerID=MN8TOARS.
    10.1016/j.tafmec.2016.08.010
  12. Montalvão, D.; Baker, T.. "Correlating peer and tutor assessment on a low-stakes engineering assignment". International Journal of Mechanical Engineering Education 43 3 (2015): 168-179. http://www.scopus.com/inward/record.url?eid=2-s2.0-84943161634&partnerID=MN8TOARS.
    10.1177/0306419015603008
  13. Montalvão, D.; Silva, J.M.M.. "An alternative method to the identification of the modal damping factor based on the dissipated energy". Mechanical Systems and Signal Processing 54 (2015): 108-123. http://www.scopus.com/inward/record.url?eid=2-s2.0-84915750955&partnerID=MN8TOARS.
    10.1016/j.ymssp.2014.08.025
  14. Montalvão, D.; Karanatsis, D.; Ribeiro, A.M.; Arina, J.; Baxter, R.. "An experimental study on the evolution of modal damping with damage in carbon fiber laminates". Journal of Composite Materials 49 19 (2015): 2403-2413. http://www.scopus.com/inward/record.url?eid=2-s2.0-84938305295&partnerID=MN8TOARS.
    10.1177/0021998314547526
  15. Montalvão, D.; Shengwen, Q.; Freitas, M.. "A study on the influence of Ni-Ti M-Wire in the flexural fatigue life of endodontic rotary files by using Finite Element Analysis". Materials Science and Engineering C 40 (2014): 172-179. http://www.scopus.com/inward/record.url?eid=2-s2.0-84922393840&partnerID=MN8TOARS.
    10.1016/j.msec.2014.03.061
  16. Montalvão, D.; Alçada, F.S.; Braz Fernandes, F.M.; De Vilaverde-Correia, S.. "Structural characterisation and mechanical fe analysis of conventional and m-wire Ni-Ti alloys used in endodontic rotary instruments". The Scientific World Journal 2014 (2014): http://www.scopus.com/inward/record.url?eid=2-s2.0-84893874806&partnerID=MN8TOARS.
    10.1155/2014/976459
  17. Montalvão, D.; Cláudio, R.A.L.D.; Ribeiro, A.M.R.; Duarte-Silva, J.. "Experimental measurement of the complex Young's modulus on a CFRP laminate considering the constant hysteretic damping model". Composite Structures 97 (2013): 91-98. http://www.scopus.com/inward/record.url?eid=2-s2.0-84871475013&partnerID=MN8TOARS.
    10.1016/j.compstruct.2012.10.050
  18. Montalvão, D.; Ribeiro, A.M.R.; Duarte-Silva, J.A.B.. "Experimental Assessment of a Modal-Based Multi-Parameter Method for Locating Damage in Composite Laminates". Experimental Mechanics 51 9 (2011): 1473-1488. http://www.scopus.com/inward/record.url?eid=2-s2.0-80053565411&partnerID=MN8TOARS.
    10.1007/s11340-011-9472-5
  19. Montalvão, D.; Alçada, F.S.. "Numeric comparison of the static mechanical behavior between ProFile GT and ProFile GT series X rotary nickel-titanium files". Journal of Endodontics 37 8 (2011): 1158-1161. http://www.scopus.com/inward/record.url?eid=2-s2.0-79960439220&partnerID=MN8TOARS.
    10.1016/j.joen.2011.05.018
  20. Montalvão, D.; Ribeiro, A.M.R.; Duarte-Silva, J.A.B.. "On the use of vibration parameters for the estimation of damage in laminated composite plates". International Review of Mechanical Engineering 4 5 (2010): 594-600. http://www.scopus.com/inward/record.url?eid=2-s2.0-84856465235&partnerID=MN8TOARS.
  21. Montalvão, D.; Ribeiro, A.M.R.; Duarte-Silva, J.. "A numerical-experimental method for the damage location in composite plates". Civil-Comp Proceedings 93 (2010): http://www.scopus.com/inward/record.url?eid=2-s2.0-84893871825&partnerID=MN8TOARS.
  22. Montalvão, D.; Ribeiro, A.M.R.; Duarte-Silva, J.. "A method for the localization of damage in a CFRP plate using damping". Mechanical Systems and Signal Processing 23 6 (2009): 1846-1854. http://www.scopus.com/inward/record.url?eid=2-s2.0-67349277096&partnerID=MN8TOARS.
    10.1016/j.ymssp.2008.08.011
  23. Montalvão, D.; Maia, N.M.M.; Ribeiro, A.M.R.. "A review of vibration-based structural health monitoring with special emphasis on composite materials". Shock and Vibration Digest 38 4 (2006): 295-324. http://www.scopus.com/inward/record.url?eid=2-s2.0-33746833728&partnerID=MN8TOARS.
    10.1177/0583102406065898
  24. Montalvão, D.; Ribeiro, A.M.R.; Maia, N.M.M.; Silva, J.M.M.. "Estimation of the rotational terms of the dynamic response matrix". Shock and Vibration 11 3-4 (2004): 333-350. http://www.scopus.com/inward/record.url?eid=2-s2.0-4644322062&partnerID=MN8TOARS.

Other

Other output
  1. Introduction to Sensors and Signal Processing. 2015. Diogo Montalvão.
    10.1201/b19009-7
Activities

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2012 - 2012 Análise da complementaridade dos critérios para localização de dano em placas de compósitos laminados
Co-supervisor
 Engenharia Mecânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
Distinctions

Award

2019 You're Brilliant Award
Students' Union at Bournemouth University - SUBU, United Kingdom
2015 Outstanding Contribution to PG Student Experience
University of Hertfordshire Business School, United Kingdom
2014 Excellence in the advancement of student experience and graduate success (Highly Commended)
University of Hertfordshire, United Kingdom
2009 Menção Honrosa no Prémio Jovens Investigadores UTL/Deloitte 2009
Universidade de Lisboa, Portugal