???global.info.a_carregar???
Margarida Brito graduated in Chemical Engineering from the University of Porto in June 2016. She integrated the LSRE-LCM (lsre-lcm.fe.up.pt) research team in September 2016, as project researcher. In February 2017, she started her PhD in Chemical and Biological Engineering with a FCT fellowship (PD/BD/135060/2017). In the scope of her PhD, she was at the University of Manchester in 2018 for four months studying the mixing of high viscous fluids in non-inertial regimes. In 2021, she got her PhD degree with the thesis entitled "Mixing Mechanisms in 2D Reactors", where she developed new skills, such as in flow visualization experimental techniques (Planar Laser Induced Fluorescence) and Computational Fluid Dynamics (CFD) tools. Then, she pursued her PostDoc studies at LEPABE (lepabe.fe.up.pt) in the project HyGreen&LowEmissions (NORTE-01- 0145- FEDER-000077). During her post-doctoral activities, Margarida was at Laboratoire Génie Chimique (LGC- INP) in Toulouse from September 2022 to January 2023, studying experimentally the mechanisms that control the particle suspensions in continuous oscillatory flow reactors. Currently, she is a junior researcher of the BioShoes4All project (PRR - 000011) at LSRE-LCM. In 2023, she was awarded the EFCE Young Researcher Award in Mixing 2023 by the European Federation of Chemical Engineering and its Working Party on Mixing for the innovation, breadth and depth of her research on 2D reactors and the dissemination of the results. She has published 21 papers in peer-reviewed journals (9 as first author and 6 as the corresponding author). In parallel to her research activities, since 2019 she has been an Invited Assistant Professor at the Faculty of Engineering of the University of Porto (FEUP). In January 2023, she was awarded the Pedagogical Excellence Award from FEUP, which distinguishes the lecturers by their educational models of excellence.
Identificação

Identificação pessoal

Nome completo
Margarida Brito

Nomes de citação

  • Brito, M.S.C.A.

Identificadores de autor

Ciência ID
931A-17E4-BD8E
ORCID iD
0000-0003-1134-1743

Endereços de correio eletrónico

  • mbrito@fe.up.pt (Profissional)

Moradas

  • Laboratory of Separation and Reaction Engineering – Laboratory of Catalysis and Materials (LSRE-LCM), Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465, Porto, Portugal, Portugal (Profissional)

Websites

  • linkedin.com/in/margarida-abrunhosa-de-brito-292631121 (Rede social)

Domínios de atuação

  • Ciências da Engenharia e Tecnologias - Engenharia Química

Idiomas

Idioma Conversação Leitura Escrita Compreensão Peer-review
Português (Idioma materno)
Inglês Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1) Utilizador proficiente (C1)
Formação
Grau Classificação
2017/02/01 - 2021/02/26
Concluído
Doctoral Program in Chemical and Biological Engineering (Doutoramento)
Universidade do Porto, Portugal

Universidade do Porto Laboratório de Processos de Separação e Reacção Laboratório de Catálise e Materiais, Portugal
"Mixing Mechanisms in 2D Reactors" (TESE/DISSERTAÇÃO)
Unanimity Approval
2011/09 - 2016/07/21
Concluído
Integrated Master in Chemical Engineering (Mestrado integrado)
Especialização em Processos e Produtos
Universidade do Porto, Portugal
"Experimental and Numerical Studies on Topology of Mixing " (TESE/DISSERTAÇÃO)
16
Percurso profissional

Ciência

Categoria Profissional
Instituição de acolhimento
Empregador
2023/04/03 - Atual Investigador Contratado (Investigação) Universidade do Porto Laboratório de Processos de Separação e Reacção Laboratório de Catálise e Materiais, Portugal
Universidade do Porto Faculdade de Engenharia, Portugal
2021/07/23 - 2023/03/31 Pós-doutorado (Investigação) Universidade do Porto Laboratorio de Engenharia de Processos Ambiente Biotecnologia e Energia, Portugal
Universidade do Porto Faculdade de Engenharia, Portugal
2022/09/05 - 2023/02/05 Investigador visitante (Investigação) Laboratoire de Génie Chimique, França
Toulouse INP ENSIACET, França
2017/02/01 - 2021/02/26 Investigador (Investigação) Fundação para a Ciência e a Tecnologia, Portugal
Universidade do Porto, Portugal
2018/04/01 - 2018/07/31 Investigador visitante (Investigação) The University of Manchester, Reino Unido
2016/09/01 - 2017/01/31 Investigador (Investigação) Universidade do Porto Laboratório de Processos de Separação e Reacção Laboratório de Catálise e Materiais, Portugal
Universidade do Porto, Portugal
2013/10 - 2015/06 Estagiário de Investigação (Investigação) REQUIMTE, Portugal

Docência no Ensino Superior

Categoria Profissional
Instituição de acolhimento
Empregador
2021/03/01 - Atual Professor Auxiliar Convidado (Docente Universitário) Universidade do Porto Faculdade de Engenharia, Portugal
Universidade do Porto Faculdade de Engenharia, Portugal
2019/02 - 2021/02/26 Assistente Convidado (Docente Universitário) Universidade do Porto, Portugal
2015/09 - 2015/11 Monitor (Docente Universitário) Universidade do Porto, Portugal
Projetos

Bolsa

Designação Financiadores
2017/02/01 - 2021/02/26 Mixing Mechanisms in 2D Reactors
PD/BD/135060/2017
Bolseiro de Doutoramento

Projeto

Designação Financiadores
2023/04/03 - Atual BioShoes4All - Innovation and preparation of the footwear sector for the sustainable bioeconomy
PRR - 000011
Investigador
Universidade do Porto Laboratório de Processos de Separação e Reacção Laboratório de Catálise e Materiais, Portugal
Em curso
2021/04/01 - Atual HyGreen&LowEmissions - Tackling Climate Change Impacts: the role of Green Hydrogen production, storage and use, together with low emissions energy systems
NORTE-01-0145-FEDER-000077
Bolseiro de Pós-Doutoramento
Concluído
2021/03/01 - Atual OZONE4WATER - Cutting-Edge Ozone-Technology for Water Treatment
PTDC/EAM-AMB/4702/2020
Bolseiro de Investigação
Universidade do Porto Faculdade de Engenharia, Portugal
Em curso
2018/07/01 - Atual HXmeso - Process intensification in meso reactors with high heat transfer rates
POCI-01-0145-FEDER-030445
Bolseiro de Investigação
Universidade do Porto Laboratório de Processos de Separação e Reacção Laboratório de Catálise e Materiais, Portugal
Em curso
2021/01/01 - 2025/12/31 ALICE - Associate Laboratory in Chemical Engineering
LA/P/0045/2020
Universidade do Porto Laboratorio de Engenharia de Processos Ambiente Biotecnologia e Energia, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Universidade do Porto Centro de Estudos de Fenómenos de Transporte, Portugal

Universidade do Porto Laboratório de Processos de Separação e Reacção Laboratório de Catálise e Materiais, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Em curso
2023/01/01 - 2024/12/30 CORPS - Continuous Oscillatory Reactors for Particle Suspensions
NA
Investigador responsável
Em curso
2020/01/01 - 2023/12/31 Laboratory of Separation and Reaction Engineering - Laboratory of Catalysis and Materials
UIDB/50020/2020
Universidade do Porto Laboratório de Processos de Separação e Reacção Laboratório de Catálise e Materiais, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2020/01/01 - 2023/12/31 Laboratory of Separation and Reaction Engineering - Laboratory of Catalysis and Materials
UIDP/50020/2020
Universidade do Porto Laboratório de Processos de Separação e Reacção Laboratório de Catálise e Materiais, Portugal

Universidade do Porto Faculdade de Engenharia, Portugal

Instituto Politécnico de Leiria, Portugal
Fundação para a Ciência e a Tecnologia
Concluído
2016/09/01 - 2017/01/31 2Dmix - 2D Mixing Devices - Fundamental Study and Applications of the Inversion of the Turbulent Energy Cascade
POCI-01-0145-FEDER-016851
Bolseiro de Investigação
Concluído
Produções

Publicações

Artigo em conferência
  1. Lencastre, E.; Brito, M.S.C.A.; Sousa, S.I.; Tomé, M.; Santos, R.J.. "Numerical Studies and CFD Simulation of Natural Simulation on a Typical Schoolroom: Evaluation of turbulence models and comparision of ventilation mechanisms.". Trabalho apresentado em CCS – 5a conferência Campus Sustentável – Capacitação para a ação climática: do campus à comunidade, Viana do Castelo, 2023.
  2. Brandão, S.P.; Brito, M.S.C.A.; Santos, R.J.. "Flow Modulation in Chemical Reactors". Trabalho apresentado em 2nd Baldyga Seminar, Berlin, 2023.
  3. Barbosa, I.S.O.; Oliveira, M.T.; Brito, M.S.C.A.; Santos, R.J.; Silva, C.G.. "Peridioc Conditions on Prismatic Repeating Cells". Trabalho apresentado em 2nd Baldyga Seminar, Berlin, 2023.
  4. Oliveira, M.T.; Barbosa, I.O.; Brito, M.S.C.A.; Silva, C.G.; Santos, R.J.. "CFD Simulation of Mass Transfer and Chemical Reaction in Photocatalytic Mesoctructured Reactors". Trabalho apresentado em 2nd Baldyga Seminar, Berlin, 2023.
  5. Barbosa, I.S.O.; Costa, J.M.; Manrique, Y.A.; Dias, M.M.; Faria, J.L.; Santos, R.J.; Silva, C.G.; Brito, M.S.C.A.. "ChannelCOMB Device for Mesostructured Reactors and Networks of Reactors". Trabalho apresentado em CHISA 2022, Toulouse, 2023.
  6. Barbosa, I.S.O.; Costa, J.M.; Manrique, Y.A.; Dias, M.M.; Faria, J.L.; Santos, R.J.; Silva, C.G.; Brito, M.S.C.A.. "ChannelCOMB, 3D-Printed device for Flow Distribution Uniformity in Mesoctrutured Reactors". Trabalho apresentado em DCE23 – 5th Doctoral Congress in Engineering, Porto, 2023.
  7. Brandão, S.P.; Brito, M.S.C.A.; Ferreira, A.; Santos, R.J.. "Transition Flow Regimes in Baffled Reactors". Trabalho apresentado em DCE23 – 5th Doctoral Congress in Engineering, Porto, 2023.
  8. Duarte, M. C.; Brito, M.S.C.A.; Karpinska, A. M.; Santos, R.J.. "CFD Simulations for the design of primary settlers". Trabalho apresentado em 1st Baldyga Seminar 2022, Toulouse, 2022.
  9. Brandão, S.P.; Fernandes, I.S.; Dias, M.M.; Lopes, J.C.B.; Santos, R.J.; Brito, M.S.C.A.. "Fundamental studies on Oscillatory NETmix Reactor". Trabalho apresentado em 1st Baldyga Seminar 2022, Toulouse, 2022.
  10. Barbosa, I.S.O.; Oliveira, B.O.; Brito, M.S.C.A.; Manrique, Y.A.; Dias, M.M.; Faria, J.L.; Santos, R.J.; Silva, C.G.; Sampaio, M.J.. "Development and Optimization of a Device in Continuous Flow Regime for Photocatalytic Oxygen Production". Trabalho apresentado em 1st Baldyga Seminar 2022, Toulouse, 2022.
  11. Marques, M. ; Sanchez-Salvador, J. L.; Monte, M. C.; Manrique, Y. A.; Blanco, A.; Santos, R.J.; Dias, M. M.; Brito, M.S.C.A.. "Development of Emulsion Products from Natural Raw Materials". Trabalho apresentado em Smart and Circular Agriculture Towards Sustainability 2022, Porto, 2022.
  12. Barbosa, I.S.O.; Brito, M.S.C.A.; Oliveira, B. F.; Sampaio, M.J.; Faria, J.L.; Silva, C.G.; Santos, R.J.. "A Multichannel Device for High Throughput Photocatalysts Testing". Trabalho apresentado em Virtual CHISA Conference organized by Czech Society of Chemical Engineering, 2021.
  13. Fernandes, I.S.; Brito, M.S.C.A.; Manrique, Y. A.; Dias, M.M.; Lopes, J.C.B.; Santos, R.J.. "Two-Phase Flow in NETmix Reactors". Trabalho apresentado em Virtual CHISA Conference organized by Czech Society of Chemical Engineering, 2021.
  14. Neto, I. F. F.; Sousa, C. A.; Brito, M. S. C. A.; Futuro, A. M.; Soares, H. M. V. M.. "Recover of Cu and Al, with high selectivity, from a multi-element solution using a bispicolylamine resin". Trabalho apresentado em XXI Encontro Gallego-Português de Química, Pontevedra, 2015.
Artigo em revista
  1. Marques, M. P.; Sanchez-Salvador, J. L.; Monte, M. C.; Blanco, A.; Santos, R. J.; Dias, M. M.; Manrique, Y. A.; Brito, M. S. C. A.. "Development of O/W Pickering Emulsions Stabilized with Leek Leaf Trimmings Using Batch and Continuous Modes". Food and Bioprocess Technology (2024): http://dx.doi.org/10.1007/s11947-023-03296-7.
    10.1007/s11947-023-03296-7
  2. Fernandes, I. S.; Brito, M.S.C.A.; Manrique, Yaidelin A.; Dias, Madalena M.; Lopes, J. C. B.; Santos, R. J.. "Experimental and numerical characterisation of two-phase flow in NETmix reactors". Chemical Engineering and Processing - Process Intensification 194 (2023): 109580. http://dx.doi.org/10.1016/j.cep.2023.109580.
    10.1016/j.cep.2023.109580
  3. Brito, M.S.C.A.; Brandão, S.P.; Gonçalves, N.D.; Fonte, C.P.; Dias, M.M.; Lopes, J.C.B.; Santos, R.J.. "On the control of 2D turbulence by active mixing in opposed jets mixers". Chemical Engineering Research and Design 195 (2023): 272-285. http://dx.doi.org/10.1016/j.cherd.2023.05.045.
    10.1016/j.cherd.2023.05.045
  4. Brito, M.S.C.A.; Dias, M.M.; Lopes, J.C.B.; Santos, R.J.; Fonte, C.P.. "A general design equation for Confined Impinging Jets mixers". Chemical Engineering Journal 465 (2023): 142892. http://dx.doi.org/10.1016/j.cej.2023.142892.
    10.1016/j.cej.2023.142892
  5. Barbosa, I. S. O. ; Costa, J. M. ; Manrique, Y. A.; Dias, M. M.; Faria, J. L.; Santos, R. J.; Silva, C. G.; Brito, M. S. C. A.. "ChannelCOMB Device for Mesostructured Reactors and Networks of Reactors". Chemical Engineering & Technology (2023): https://doi.org/10.1002/ceat.202200560.
    10.1002/ceat.202200560
  6. Sanchez-Salvador, J. L.; Marques, M. P. ; Brito, Margarida S. C. A.; Negro, C.; Monte, M. C.; Manrique, Y. A.; Santos, R. J.; Blanco, A.. "Valorization of Vegetable Waste from Leek, Lettuce, and Artichoke to Produce Highly Concentrated Lignocellulose Micro- and Nanofibril Suspensions". Nanomaterials (2022): https://doi.org/10.3390/nano12244499.
    10.3390/nano12244499
  7. Teixeira, A. P. ; Coutinho, B.; Cancela, J.; Cullen, L.; Brito, M.S.C.A.. "Valorisation of Kiwifruit Residues and their Application in an Anti-ageing Facial Cream". U.Porto Journal of Engineering (2022): https://doi.org/10.24840/2183-6493_008.005_0008.
    10.24840/2183-6493_008.005_0008
  8. Carvalho, F.; Duarte, F.; Pedreiras, L.; Posada, V.; Brito, M.S.C.A.. "Xylitol". U.Porto Journal of Engineering (2022): https://doi.org/10.24840/2183-6493_008.005_0014.
    10.24840/2183-6493_008.005_0014
  9. Ribeiro, J.P.; Brito, M.S.C.A.; Santos, R. J.; Nunes, M. I.. "Reactive PLIF Method for Characterisation of Micromixing in Continuous High-Throughput Chemical Reactors". Processes (2022): https://doi.org/10.3390/pr10101916.
    10.3390/pr10101916
  10. Brito, M.S.C.A.; Barbosa, I.S.O.; Fonte, C.P.; Dias, M. M.; Lopes, J. C. L.; Santos, R.J.. Autor correspondente: Santos, R.J.. "Effective mixing of dissimilar fluids in asymmetric Confined Impinging Jets mixers". Chemical Engineering Science 258 (2022): 117756-117756. http://dx.doi.org/10.1016/j.ces.2022.117756.
    10.1016/j.ces.2022.117756
  11. Brito, M.S.C.A.. "Design of Model Fluids for Flow Characterization Experiments Involving Mixing of Dissimilar Fluids—Refractive Index Matching and Physical Properties". Processes 10 7 (2022): 1260-1260. https://doi.org/10.3390/pr10071260.
    10.3390/pr10071260
  12. Brito, M.S.C.A.; Matos, J.; Torres, M. V. L.; Fonte, C. P.; Dias, M. M.; Lopes, J. C. B.; Santos, R. J.. "Rheokinematics for product development¿ - Formulation screening in rotational rheometers". AIChE Journal (2022): http://dx.doi.org/10.1002/aic.17597.
    10.1002/aic.17597
  13. Brito, M.S.C.A.; Santos, R. J.; Dias, M. M.; Lopes, J. C. B.; Fonte, C. P.. "Striation Thickness Distribution in Split-and-Recombine Mixers in the Stokes Regime". Chemical Engineering and Processing - Process Intensification 170 (2022): 108714-108714. http://dx.doi.org/10.1016/j.cep.2021.108714.
    10.1016/j.cep.2021.108714
  14. Brito, M.S.C.A.; Fonte, C. P.; Dias, M. M.; Lopes, J. C. B.; Santos, R. J.. "Flow Regimes and Mixing of Dissimilar Fluids in T-Jets Mixers". Chemical Engineering & Technology (2021): http://dx.doi.org/10.1002/ceat.202100536.
    10.1002/ceat.202100536
  15. Fernandes, I. S.; Brito, M.S.C.A.; Manrique, Y.; Dias, M. M.; Lopes, J. C. B.; Santos, R. J.. Autor correspondente: Santos, R. J.. "Computational Fluid Dynamics Model of Two-Phase Flow in NETmix Reactors". Chemical Engineering & Technology 44 11 (2021): 2002-2010. http://dx.doi.org/10.1002/ceat.202100245.
    10.1002/ceat.202100245
  16. Barbosa, I.; Santos, R. J.; Silva, C. G.; Brito, M.S.C.A.. Autor correspondente: Brito, M.S.C.A.. "Consecutive Flow Distributor Device for Mesostructured Reactors and Networks of Reactors". Chemical Engineering and Processing - Process Intensification 167 (2021): 108541-108541. http://dx.doi.org/10.1016/j.cep.2021.108541.
    10.1016/j.cep.2021.108541
  17. Brito, M.S.C.A.; Dias, M.M.; Santos, R.J.; Lopes, J.C.B.; Fonte, C.P.. "Fully Resolved Modelling and Simulation of Micromixing in Confined Impinging Jets". Chemical Engineering Science (2019): 115299-115299. https://doi.org/10.1016/j.ces.2019.115299.
    10.1016/j.ces.2019.115299
  18. Matos, J.; Brito, M.S.C.A.; Dias, M.M.; Lopes, J.C.B.; Santos, R.J.. "Lagrangian mixing simulation and quantification of scales". Chemical Engineering Science 192 (2018): 199-210. http://dx.doi.org/10.1016/j.ces.2018.07.035.
    10.1016/j.ces.2018.07.035
  19. Sultan, M. Ashar; Pardilhó, Sara L.; Brito, Margarida S. C. A.; Fonte, Cláudio P.; Dias, Madalena M.; Lopes, José C. B.; Santos, Ricardo J.. "3D Mixing Dynamics in T-Jet Mixers". Chemical Engineering & Technology 42 1 (2018): 119-128. http://dx.doi.org/10.1002/ceat.201700684.
    10.1002/ceat.201700684
  20. Brito, M.S.C.A.; Esteves, L.P.; Fonte, C.P.; Dias, M.M.; Lopes, J.C.B.; Santos, R.J.. "Mixing of fluids with dissimilar viscosities in Confined Impinging Jets". Chemical Engineering Research and Design 134 (2018): 392-404. http://dx.doi.org/10.1016/j.cherd.2018.04.020.
    10.1016/j.cherd.2018.04.020
  21. Neto, I.F.F.; Sousa, C.A.; Brito, M.S.C.A.; Futuro, A.M.; Soares, H.M.V.M.. "A simple and nearly-closed cycle process for recycling copper with high purity from end life printed circuit boards". Separation and Purification Technology 164 (2016): 19-27. http://www.scopus.com/inward/record.url?eid=2-s2.0-84965169487&partnerID=MN8TOARS.
    10.1016/j.seppur.2016.03.007
Poster em conferência
  1. Oliveira, M.T.; Barbosa, I.O.; Brito, M.S.C.A.; Silva C.G.; Santos, R.J.. "Mass Transfer Limitations in Photocatalytic Mesosctructured Reactors for Green Ammonia Production". Trabalho apresentado em ECCE 14 – 14th European Conference of Chemical Engineering, 2023.
  2. Barbosa, I.S.O; Cancela, J.; Oliveira, M.T; Jorge, M.; Brito, M.S.C.A.; Manrique Y.A; Sampaio, M.J.; et al. "Photo-assisted production of green ammonia-based fuels". Trabalho apresentado em ECCE 14 – 14th European Conference of Chemical Engineering, 2023.
  3. Brandão, S.P.; Brito, M.S.C.A.; Ferreira, A.; Santos, R.J.. "Characterization of flow regimes in baffled reactors with smooth periodic constrictions by computational fluid dynamics (CFD)". Trabalho apresentado em ECCE 14 – 14th European Conference of Chemical Engineering, 2023.
  4. Delvar, E.; Brito, M.S.C.A.; Echart, A.; Barreiro, F.,; Silva, C.G.; Santos, R.J.. "Modelling of Reactive Extrusion Process by Mixing two Similar Fluids in the Extruder". Trabalho apresentado em ChemPor 2023 – 14th International Chemical and Biological Engineering Conference, 2023.
  5. Peixoto, M.L.R.; Brito, M.S.C.A.; Santos, R.J.; Vilar, V.J.P.. "CFD Modelling of Vertical Flow and Mixing in Raceway Pond Reactor". Trabalho apresentado em Mixing 17, 2023.
  6. Oliveira, M.T.; Barbosa, I.O.; Brito, M.S.C.A.; Silva, C.G.; Santos, R.J.. "Mass Transfer Limitations in Photocatalytic Mesostructured Reactors for Green Ammonia Production". Trabalho apresentado em Mixing 17, 2023.
  7. Delvar, E.; Brito, M.S.C.A.; Barreiro, F.; Silva, C.G.; Echart, A.; Santos, R.J.. "Development of Lab-Scale Formulation: Reaction extrusion process for Industrial Mixing Conditions". Trabalho apresentado em Mixing 17, 2023.
  8. Brandão, S.P.; Brito, M.S.C.A.; Ferreira, A.; Santos, R.J.. "Transition Flow Regimes in Baffled Reactors". Trabalho apresentado em Mixing 17, 2023.
  9. Brito, M.S.C.A.; Ferreira, A.; Rocha, F.; Santos, R.J.; Aubin, J.. "Solid-Liquid Suspension in Continuous Oscillatory Baffled Reactors – Experimental Study". Trabalho apresentado em Mixing 17, 2023.
  10. Oliveira, M.T.; Barbosa, I.O.; Brito, M.S.C.A.; Silva C.G.; Santos, R.J.. "CFD Design of Photocatalytic Mesosctructured Reactors for Ammonia Production". Trabalho apresentado em DCE23 – 5th Doctoral Congress in Engineering, 2023.
  11. Peixoto, M.L.R.; Brito, M.S.C.A.; Santos, R.J.; Vilar, V.J.P.. "CFD Modelling of Raceway Pond Reactor: Overall Geometry improvement". Trabalho apresentado em DCE23 – 5th Doctoral Congress in Engineering, 2023.
  12. Brandão, S.P.; Fernandes, I.S.; Dias, M. M.; Lopes, J.C.B.; Santos, R.J.; Brito, M.S.C.A.. "O-NETmix: a new configuration of an oscillatory static mixer". Trabalho apresentado em Chisa 2022, 2022.
  13. Brito, M.S.C.A.; Ferreira, A.; Rocha, F.; Dias, M. M.; Santos, R. J.. "Flow Dynamics in Oscillatory Baffled Reactors". Trabalho apresentado em Mixing XXVII Conference, 2022.
  14. Brito, M.S.C.A.; Fonte, C. P.; Dias, M. M.; Lopes, J. C. B.; Santos, R. J.. "Formulation Screening in Rotational Rheometers". Trabalho apresentado em Ciência19, 2019.
  15. Matos, J.; Brito, M.S.C.A.; Dias, M. M.; Lopes, J. C. B.; Santos, R. J.. "Lagrangian Mixing Simulation and Quantification of Scales". Trabalho apresentado em ChemPor18, 2018.
  16. Brito, M.S.C.A.; Santos, R. J.; Dias, M. M.; Fonte, C. P.; Lopes, J. C. B.. "Modelling of Micromixing in Confined Impinging Jets". Trabalho apresentado em Mixing 16, 2018.
  17. Brito, M.S.C.A.; Gonçalves, N. D.; Fonte, C. P.; Dias, M. M.; Lopes, J. C. B.; Santos, R. J.. "Formulation Screening in Rotational Shear Flow Devices". Trabalho apresentado em ISMIP IX, 2017.
Tese / Dissertação
  1. "Mixing Mechanisms in 2D Reactors". Doutoramento, Universidade do Porto Faculdade de Engenharia, 2021.
  2. Brito, M.S.C.A.. "Experimental and Numerical Studies on Topology of Mixing". Mestrado, 2017. https://repositorio-aberto.up.pt/handle/10216/85537.
Atividades

Apresentação oral de trabalho

Título da apresentação Nome do evento
Anfitrião (Local do evento)
2023/10/18 Flow Visualization of Mixing Fluids with Different Viscosities 1st Baldyga Seminar 2022
(Toulouse, França)
2023/07/05 Mixing Mechanisms in 2D Reactors Mixing 17
(porto, Portugal)
2023/06/04 Continuous Production of Pickering Emulsions containing Leek Fibers. WCCE 11 – 11th World Congress of Chemical Engineering
(Buenos Aires, Argentina)
2023/06/04 New Formulation Process for High-Throughput Materials Development WCCE 11 – 11th World Congress of Chemical Engineering. Buenos Aires
(Buenos Aires, Argentina)
2022/06/23 Production of Pickering Emulsions containing Cellulose Microfibres in Mesostructured Reactors Mixing XXVII Conference
NORTH AMERICAN MIXING FORUM
2021/03/17 Experimental Study of Flow Regimes and Mixing of Dissimilar Fluids in T-Jets Mixers Virtual CHISA Conference
Czech Society of Chemical Engineering (Virtual, República Checa)
2021/03/17 Production of Emulsions in Continuous Impinging Jets Mixers for the Food Industry Virtual CHISA Conference
Czech Society of Chemical Engineering (Virtual, República Checa)
2020/11/16 Experimental Study of Flow Regimes and Mixing of Dissimilar Fluids in T-Jets Mixers. 2020 Virtual AIChE Annual Meeting
AIChE (Virtual, Estados Unidos)
2020/11/16 New Formulation Process for High Throughput Materials Development 2020 Virtual AIChE Annual Meeting
AIChE (Virtual, Estados Unidos)
2019/09/18 Design of Continuous Confined Impinging Jets for Emulsions 12th European Congress of Chemical Engineering 2019
European Federation of Chemical Engineering (Florence, Itália)
2019/06/27 Mixing of Dissimilar Fluids in Micro/Milli Reactors Doctoral Congress in Engineering
(Porto, Portugal)
2018/10/02 Mixing of Dissimilar Fluids in Confined Impinging Jets – Mayonnaise Equation ChemPor18
(Aveiro, Portugal)
2017/07/26 Topology of mixing for dissimilar fluids in mesomixers Mixing XXV Conference
(Quebec City, Canadá)
2017/06/09 Mixing of Similar Fluids in Mesomixers 2nd Doctoral Congress of Engineering
(Porto, Portugal)

Orientação

Título / Tema
Papel desempenhado
Curso (Tipo)
Instituição / Organização
2024/02/05 - Atual Numerical Studies on mixing mechanisms in reactive extrusion
Orientador
MSc (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2024/02/05 - Atual Development of edible Pickering emulsions as food sauces alternatives
Coorientador
MSc (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2023/09/01 - Atual Fundamentals of Active Mixing Design
Coorientador
PhD (Doutoramento)
Universidade do Porto Faculdade de Engenharia, Portugal
2023/02/06 - 2023/07/31 Formulation development of cellulose based pastes for additive manufacturing
Orientador
Chemical Engineering (Mestrado)
Universidade do Porto Laboratório de Processos de Separação e Reacção Laboratório de Catálise e Materiais, Portugal
2023/02/06 - 2023/07/31 Design a novel raceway pond reactor for waste activated sludge advanced pre-treatment to foster biogas production
Coorientador
Chemical Engineering (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2023/02/06 - 2023/07/31 CFD process design for photo-assisted production of green ammonia-based fuels
Coorientador
Chemical Engineering (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2022/03/01 - 2022/07/21 Fundamental studies on oscillatory NETmix reactor
Orientador
Chemical Engineering (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2022/03/01 - 2022/07/19 Analysis of natural ventilation in primary classrooms using CFD
Orientador
Chemical Engineering (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal
2022/03/01 - 2022/07/19 Advanced Computational Methods Applied To The Design of Primary Settlers
Coorientador
Environmental Engineering (Mestrado)
Universidade do Porto, Portugal
2022/03/01 - 2022/07/18 Development of emulsion products from natural raw materials
Orientador
Chemical Engineering (Mestrado)
Universidade do Porto Faculdade de Engenharia, Portugal

Organização de evento

Nome do evento
Tipo de evento (Tipo de participação)
Instituição / Organização
2023/02/20 - Atual Escola da Engenharia de Fluidos - Workshop for high school students on fluids concepts and numerical tools for simulation. (2023/02/20 - 2023/02/20)
Oficina (workshop) (Coorganizador)
Universidade do Porto Faculdade de Engenharia, Portugal
2020/01/01 - 2023/07/30 Organizing Committee of the 17th European Conference on Mixing, 27-30 June 2021 in Porto (http://mixing17.eu/) (2020/01/01)
Conferência (Membro da Comissão Organizadora)
Universidade do Porto, Portugal
2023/01/01 - 2023/07/05 Young Programme - Mixing 17 (2023/07/05)
Encontro (Membro da Comissão Organizadora)
2022/10/17 - 2022/10/18 1st Baldyga Technical Seminar. A Seminar for the discussion of difficulties of optical measurements found by PhD students and Post-Doc researchers. (2022/10/17 - 2022/10/18)
Conferência (Coorganizador)
Toulouse INP ENSIACET, França
2022/07/01 - 2022/07/01 Workshop - Development of high added valued products based on natural raw materials in the North region of Portugal. Workshop organised in the scope of S4Hort_Soil&Food project (2022/07/01)
Oficina (workshop) (Membro da Comissão Organizadora)
Universidade do Porto Faculdade de Engenharia, Portugal

Participação em evento

Descrição da atividade
Tipo de evento
Nome do evento
Instituição / Organização
2017/04/01 - Atual Exhibition of the U.Porto (Science Exhibition) - Mostra da Porto - Activities Dissemination of the LSRE-LCM (ALiCE).
Universidade do Porto, Portugal
2017/03 - Atual Semana Profissão Engenheiro at FEUP - clarification session for secondary school students about the chemical engineering degree at FEUP
Oficina (workshop)
Universidade do Porto Faculdade de Engenharia, Portugal

Arbitragem científica em conferência

Nome da conferência Local da conferência
2023/06/04 - 2023/06/08 GS07-Global Symposium on Waste Valorisation, Circular Economy and Industrial Symbiosis WCCE11 - 11th WORLD CONGRESS OF CHEMICAL ENGINEERING

Curso / Disciplina lecionado

Disciplina Curso (Tipo) Instituição / Organização
2023/02/06 - Atual Numerical Simulation Applied to Chemical Engineering Master in Chemical Engineering (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2023/02/06 - Atual Polymeric Materials Applied to Industry Master in Chemical Engineering (Mestrado) Universidade do Porto Faculdade de Engenharia, Portugal
2022/03/01 - 2022/07/05 Physics I Bachelor in Informatics and Computing Engineering (Licenciatura) Universidade do Porto Faculdade de Engenharia, Portugal
2021/10/01 - 2022/02/28 Physics Fundamentals Bachelor in Bioengineering (Licenciatura) Universidade do Porto Faculdade de Engenharia, Portugal
2021/03/01 - 2021/07/23 Physics Integrated Master in Civil Engineering (Mestrado integrado) Universidade do Porto Faculdade de Engenharia, Portugal
2021/03/01 - 2021/07/23 Physics Integrated Master in Electrical and Computers Engineering (Mestrado integrado) Universidade do Porto Faculdade de Engenharia, Portugal
2021/03/01 - 2021/07/23 Industrial Informatics I Integrated Master in Chemical Engineering (Mestrado integrado) Universidade do Porto Faculdade de Engenharia, Portugal
2020/09/01 - 2021/02/28 Physics Fundamentals Integrated Master in Bioengineering (Mestrado integrado) Universidade do Porto Faculdade de Engenharia, Portugal
2020/02/01 - 2020/07/31 Physics Integrated Master in Civil Engineering (Mestrado integrado) Universidade do Porto Faculdade de Engenharia, Portugal
2019/09/01 - 2020/01/31 Polymeric Material II Integrated Master in Chemical Engineering (Mestrado integrado) Universidade do Porto Departamento de Engenharia Química, Portugal
2019/03/01 - 2019/07/31 Physics I Integrated Master in Chemical Engineering (Mestrado integrado) Universidade do Porto Faculdade de Engenharia, Portugal

Tutoria

Tópico Nome do aluno
2023/07/01 - 2023/09/01 Studies on the flow in reactors with smooth periodic constrictions for pharmaceutical applications Adriana Cristina Marinho Calçada Alves
2023/07/01 - 2023/09/01 Development of cellulose based pastes for additive manufacturing Bárbara Raquel Ferreira Pinto
2021/09/01 - 2021/10/01 Study of flow distribution in devices produced by 3D printing João Miguel Ferreira Costa
2021/09/01 - 2021/09/30 Formulation of oil-water emulsions with nanocellulose to food purpose Rita Joana Cachada
2019/12/01 - 2020/03/31 Continuous process for production of emulsions Jorge António Costa e Sousa
Distinções

Prémio

2023 Young Researcher Award in Mixing 2023
2023 Best Poster - "Photo-assisted production of green ammonia-based fuels"
BASF Agricultural Specialties Ltd, Canadá
2022 FEUP Pedagogical Excellence Award
Universidade do Porto Faculdade de Engenharia, Portugal
2022 Best Oral Communication - "Development of Pickering emulsion products from natural raw materials"
2018 Best Poster - "Lagrangian Mixing Simulation and Quantification of Scales"