???global.info.a_carregar???
Dr. Bai-Qiao CHEN is currently Assistant Professor in Universidade de Lisboa - Instituto Superior Técnico (IST). He completed his Doctorate degree with reference 2418/ISTCD/16 in 2016/07 by Universidade de Lisboa - Instituto Superior Técnico and his Master's degree with reference 6799/ISTCM/12 in 2011 by the same university. He has published 39 articles in journals, edited a book, and has about 40 book chapters and conference papers. Has received 2 awards and/or honours. He is on the Editorial Board of several journals, including Brodogradnja (ISSN 0007-215X), Journal of Marine Science and Application (ISSN 1671-9433), Journal of Marine Science and Engineering (ISSN 2077-1312), etc., and serves as Guest Editor for four international journals. He has reviewed over 200 papers for journals such as Marine Structures, Ocean Engineering, and Thin-Walled Structures. He has an h-index of 21 (source: Scopus) and approximately 1,300 citations (as of 2025). He has also been a member of the International Ship and Offshore Structures Congress (ISSC) since 2018. He has given courses (master level) on Ocean Platforms, Analysis of Ship Structure, Shipyard Management, and Subsea Production Systems in IST since 2017. He also works as a supervisor of master's dissertations and PhD dissertations in offshore engineering and related areas.
Read full resume ↓
Identification

Personal identification

Full name
Baiqiao CHEN
Gender
Male

Citation names

  • Bai-Qiao, Chen

Author identifiers

Ciência ID
201D-6927-CAFC
ORCID iD
0000-0001-8847-1648
Google Scholar ID
8ic76uwAAAAJ
Researcher Id
J-2535-2012
Scopus Author Id
56046456500

Email addresses

  • baiqiao.chen@tecnico.ulisboa.pt (Professional)

Addresses

  • Instituto Superior Técnico, Av. Rovisco Pais, 1049-001, Lisboa, Lisboa, Portugal (Professional)

Websites

Knowledge fields

  • Engineering and Technology

Languages

Language Speaking Reading Writing Listening Peer-review
Chinese (Mother tongue)
English Advanced (C1) Advanced (C1) Proficiency (C2) Advanced (C1)
Portuguese Intermediate (B1) Upper intermediate (B2) Intermediate (B1) Intermediate (B1)
Education
Degree Classification
2016/07
Concluded
 Engenharia Naval (Doutoramento)
Major in Sem especialidade
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Effects of Weld Induced Distortions and Residual Stresses on the Ultimate Strength of Stiffened Plates" (THESIS/DISSERTATION)
 Aprovado com distinção e louvor
2011
Concluded
 Engenharia e Arquitectura Naval (Mestrado)
Major in Sem especialização
Universidade de Lisboa Instituto Superior Técnico, Portugal
"Prediction of weld induced distortions in steel plates" (THESIS/DISSERTATION)
 17 valores
Affiliation

Teaching in Higher Education

Category
Host institution 		Employer
2023/07/01 - Current Assistant Professor (University Teacher) Instituto Superior Técnico Departamento de Engenharia Mecânica, Portugal
2017/12/01 - 2023/06/30 Invited Assistant Professor (University Teacher) Universidade de Lisboa Instituto Superior Técnico, Portugal
Projects

Contract

Designation Funders
2025/01/01 - 2028/12/31 Centre for Marine Technology and Ocean Engineering (CENTEC)
UID/00134/2025
10.54499/UID/00134/2025
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal

Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2018/12/01 - 2023/06/30 FCT researcher
DL 57/2016/CP1384/CT0093
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
2018/10/01 - 2022/09/30 Cementitious cork composites for improved thermal performance of pipelines for ultra-deep waters
PTDC/ECI-CON/32108/2017
Instituto de Investigação e Desenvolvimento Tecnológico para a Construção Energia Ambiente e Sustentabilidade, Portugal

Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal
Fundação para a Ciência e a Tecnologia
Ongoing
2019/01/01 - 2019/12/31 Centre for Marine Technology and Ocean Engineering
UID/Multi/00134/2019
Centro de Engenharia e Tecnologia Naval e Oceanica, Portugal

Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal

Universidade de Lisboa Instituto Superior Técnico, Portugal
Fundação para a Ciência e a Tecnologia
Concluded
2011/01/01 - 2013/12/31 Strategic Project - UI 134 - 2011-2012
PEst-OE/EME/UI0134/2011
Associação do Instituto Superior Técnico para a Investigação e Desenvolvimento, Portugal
 Fundação para a Ciência e a Tecnologia
Concluded
Outputs

Publications

Book
  1. Baiqiao Chen. Subsea Pipelines. MDPI. 2024.
    10.3390/books978-3-0365-9922-9
Book chapter
  1. W.J. Qiu; S. Zong; K. Liu; B.Q. Chen; C. Guedes Soares. "Machine learning-based prediction of structural damage in ship intentional collision scenarios". 2025.
    10.1201/9781003684404-3
  2. S. Zong; Z.L. Wang; K. Liu; Y. Lu; G. Wang; B.Q. Chen. "Dynamic mechanical properties of hull plate-frame structures under impact load". 2025.
    10.1201/9781003642411-40
  3. P. M. Costa; B.Q. Chen. "Numerical analysis of welding residual stress in subsea pipelines: Guidelines for experimental validation". 2025.
    10.1201/9781003642411-11
  4. L. Zhong; C. Jia; L.H. Guo; Y. Garbatov; B.Q. Chen. "Numerical investigation of stub cold-formed steel-lipped channels with local web defects". 2025.
    10.1201/9781003642411-8
  5. W.J. Qiu; K. Liu; X. Wan; B.Q. Chen. "Dynamic planning of cabin assembly sequence based on genetic-greedy algorithm". 2025.
    10.1201/9781003642411-64
  6. Li, Ruoxuan; Bai-Qiao, Chen; Guedes Soares, Carlos. "Experimental study on the lateral bending capacity of steel pipes with initial dents". In Advances in the Analysis and Design of Marine Structures, 551-558. Amsterdam, Netherlands: Taylor & Francis Group, 2023.
    Published
  7. E. Zavvar; H.S. Abdelwahab; E. Uzunoglu; B.Q. Chen; C. Guedes Soares. "Numerical study of the wave induced motions and loads on the CENTEC-TLP floating wind turbine". 567-573. {CRC, 2022.
    10.1201/9781003360773-65
  8. J.X. Zhang; C. An; D.F. Wei; B.Q. Chen; C. Guedes Soares. "Structural behaviour of hydrogen flexible pipe under internal pressure". 943-948. {CRC, 2022.
    10.1201/9781003360773-104
  9. E. Zavvar; B.Q. Chen; E. Uzunoglu; C. Guedes Soares. "Stress distribution on the CENTEC-TLP in still water and rated wind speed". 519-526. {CRC, 2022.
    10.1201/9781003320289-54
  10. Josefson L; Anyfantis K; Bai-Qiao, Chen. "Committee V.3: Materials and fabrication technology.". In Proceedings of the 21st International Ship and Offshore Structures Congress (ISSC), 163-240. 2022.
    Published
  11. Bai-Qiao, Chen; Videiro PM; Guedes Soares C. "Review of digital twin of ships and offshore structures". Portugal, 2021.
    10.1201/9781003216582-50
  12. Bai-Qiao, Chen; Guedes Soares C. "Numerical investigation on the influence of stiffeners on the crushing resistance of web girders in ship grounding". 49-56. {CRC, 2020.
    10.1201/9781003002420-7
  13. Chen, BQ; Hashemzadeh, M; Guedes Soares, C.. "Numerical Analysis of the Effects of Weld Parameters on Distortions and Residual Stresses in Butt Welded Steel Plates". edited by C Guedes Soares & F Lopes Peña, 309-320. 2014.
  14. Hashemzadeh, M; Chen, BQ; Guedes Soares, C. "Comparison between Different Heat Sources Types in Thin-Plate Welding Simulation". edited by C Guedes Soares & F Lopes Peña, 329-335. 2014.
  15. Hashemzadeh, M.; Chen, B.-Q.; Soares, C.G.. "Comparison between different heat sources types in thin-plate welding simulation". 329-336. 2013.
  16. Chen, B.Q.; Garbatov, Y.; Guedes Soares, C.. "Mechanical Properties Assessment of Specimens Subjected to Random Non-uniform General Corrosion and Tensile Load". edited by Guedes Soares, C. et al., 293-299. 2012.
  17. Bai-Qiao, Chen; Garbatov, Yordan; Guedes Soares, Carlos. "Mechanical properties assessment of specimen subjected to random non-uniform general corrosion and tensile load". In Maritime Engineering and Technology, 293-299. Lisbon, Portugal: Taylor & Francis Group, 2012.
    Published • 10.1201/b12726-43
Conference paper
  1. Bai-Qiao, Chen. "Next-generation structural insights: advanced empirical models for ultimate compressive strength of ships and offshore plates.". Paper presented in 1st International Conference on Engineering Structures (ICES 2024), Guangzhou, 2024.
  2. Gaiotti, M.; Barsotti, B.; Brubak, L.; Chen, B.-Q.; Darie, I.; Georgiadis, D.; Ishibashi, K.; et al. "ISSC 2025 COMMITTEE III.1 - COMPRESSIVE TEST OF A TRANSVERSELY STIFFENED THIN-PLATED STRUCTURE WITH EXPECTED EARLY NONLINEAR RESPONSE PRIOR TO THE ULTIMATE CAPACITY. PRELIMINARY COMPARISON OF THE NUMERICAL RESULTS". 2024.
    10.1115/OMAE2024-126382
  3. Li, R.; Chen, B.Q.; Soares, C.G.. "Experimental study on the lateral bending capacity of steel pipes with initial dents". 2023.
    10.1201/9781003399759-61
  4. Josefson BL; Bai-Qiao, Chen; Gotoh K; Wang F; Liu K; van Duin S; Dong P. "Benchmark study of welding deformations in stiffened plate". Paper presented in 41st International Conference on Ocean, Offshore and Arctic Engineering (OMAE), Hamburg, 2022.
    Published
  5. Josefson, B.L.; Chen, B.-Q.; Gotoh, K.; Wang, F.; Liu, K.; van Duin, S.; Dong, P.. "BENCHMARK STUDY OF WELDING DEFORMATIONS IN STIFFENED PLATE". 2022.
    10.1115/OMAE2022-87473
  6. Josefson, L.; Anyfantis, K.; de Carvalho Pinheiro, B.; Chen, B.-Q.; Dong, P.; Ferrari, N.; Gotoh, K.; et al. "COMMITTEE V.3 MATERIALS AND FABRICATION TECHNOLOGY". 2022.
    10.5957/ISSC-2022-COMMITTEE-V-3
  7. Chen, B.-Q.; Hashemzadeh, M.; Garbatov, Y.; Soares, C.G.. "Recent developments in experimental and numerical assessments of welding-induced residual stresses". 2018.
    10.1115/OMAE2018-77652
  8. Chen, B.-Q.; Guedes Soares, C.. "Numerical investigation on weld induced imperfections in aluminium ship plates". 2018.
    10.1115/OMAE2018-77655
  9. Chen, B.Q.; Guedes Soares, C.. "Numerical investigation on a side-shell structure subjected to collision impact load". 2017.
    10.1201/9781315157368-49
  10. Chen, B.-Q.; Soares, C.G.. "Effect of welding sequence on the residual stress distribution in a stiffened plate". 2016.
    10.1115/OMAE201654245
  11. Chen, B.Q.; Guedes Soares, C.. "Study on ultimate strength of ship plates with calculated weld-induced residual stress". 2015.
  12. Chen, B.Q.; Adak, M.; Guedes Soares, C.. "Numerical investigations to study the effect of weld parameters on the temperature-time history in steel plates". 2012.
  13. Chen, B.Q.; Garbatov, Y.; Guedes Soares, C.. "Automatic Approach for Measuring Deformations in Complex Structures Using Photogrammetry Technique". 2011.
  14. Chen, B.Q.; Garbatov, Y.; Guedes Soares, C.. "Displacement measurement of the box girder based on photogrammetry". 2010.
Journal article
  1. Wei Zhang; Sheng Xu; Baiqiao Chen. "Investigations on mooring chains-multi-layered soils interactions by a coupled Eulerian-Lagrangian method". Ocean Engineering (2025): https://doi.org/10.1016/j.oceaneng.2025.122595.
    10.1016/j.oceaneng.2025.122595
  2. Shuai Zong; Yue Lu; Kun Liu; Zili Wang; Bai-Qiao Chen; C. Guedes Soares. "Experimental and numerical investigation on welded aluminium plates under quasi-static indentation loads". Ocean Engineering (2025): https://doi.org/10.1016/j.oceaneng.2025.122882.
    10.1016/j.oceaneng.2025.122882
  3. Bai-Qiao Chen; Sheng Xu; Emre Uzunoglu. "Advances in the Performance of Ships and Offshore Structures". Journal of Marine Science and Engineering (2025): https://doi.org/10.3390/jmse13112133.
    10.3390/jmse13112133
  4. Xing Hua Shi; Yang Hu; Bai-Qiao Chen; Jing Zhang. "Experimental study on the CFRP repair effect on the ultimate strength of pitted stiffened plates". Ocean Engineering (2025): https://doi.org/10.1016/j.oceaneng.2025.122001.
    10.1016/j.oceaneng.2025.122001
  5. Jérémy Musolino; Xing-Hua Shi; Bai-Qiao Chen. "Numerical Investigation on Residual Stress and Distortion in Welded Joints of Offshore Platform Structures". Journal of Marine Science and Engineering (2025): https://doi.org/10.3390/jmse13101941.
    10.3390/jmse13101941
  6. Jia-Xia Wang; Yi-Fan Jin; Zi-Yang Zhang; Kun Liu; Bai-qiao Chen. "Investigation into the impact damage behaviour of advanced ship-bridge impact mitigation devices utilising foam-filled composite sandwich panels". Ships and Offshore Structures (2025): http://dx.doi.org/10.1080/17445302.2025.2486204.
    10.1080/17445302.2025.2486204
  7. Haoyun Tang; Deyuan Ren; Baiqiao Chen; C. Guedes Soares. "A trimaran structure damage identification method based on machine learning". Ocean Engineering (2025): https://doi.org/10.1016/j.oceaneng.2025.120315.
    10.1016/j.oceaneng.2025.120315
  8. Jixiang Zhang; Shan Wang; Milad Shadman; Mojtaba Maali Amiri; Baiqiao Chen; Chen An; Segen Farid Estefen. "Environmental Contour Methods for Long-Term Extreme Response Prediction of Offshore Wind Turbines". Journal of Marine Science and Application (2025): http://dx.doi.org/10.1007/s11804-025-00688-3.
    10.1007/s11804-025-00688-3
  9. Bai-Qiao Chen; Kun Liu; Sheng Xu. "Recent Advances in Aluminum Welding for Marine Structures". Journal of Marine Science and Engineering (2024): https://doi.org/10.3390/jmse12091539.
    10.3390/jmse12091539
  10. Bai-Qiao Chen; Kun Liu; Tongqiang Yu; Ruoxuan Li. "Enhancing Reliability in Floating Offshore Wind Turbines through Digital Twin Technology: A Comprehensive Review". Energies (2024): https://doi.org/10.3390/en17081964.
    10.3390/en17081964
  11. Bai-Qiao Chen; C. Guedes Soares. "Subsea Pipelines". Journal of Marine Science and Engineering (2023): https://doi.org/10.3390/jmse11061249.
    10.3390/jmse11061249
  12. Esmaeil Zavvar; Hossam S. Abdelwahab; Emre Uzunoglu; Bai-Qiao Chen; C. Guedes Soares. "Stress Distribution on the Preliminary Structural Design of the CENTEC-TLP under Still Water and Wave-Induced Loads". Journal of Marine Science and Engineering (2023): https://doi.org/10.3390/jmse11050951.
    10.3390/jmse11050951
  13. Ruoxuan Li; Bai-Qiao Chen; C. Guedes Soares. "Design Equation of Buckle Propagation Pressure for Pipe-in-Pipe Systems". Journal of Marine Science and Engineering (2023): https://doi.org/10.3390/jmse11030622.
    10.3390/jmse11030622
  14. Houyao Zhang; Chenfeng Li; Nan Zhao; Bai-Qiao Chen; Huilong Ren; Jichuan Kang. "Fire Risk Assessment in Engine Rooms Considering the Fire-Induced Domino Effects". Journal of Marine Science and Engineering (2022): https://doi.org/10.3390/jmse10111685.
    10.3390/jmse10111685
  15. João Pedro Silva; Bai-Qiao Chen; Paulo Mauricio Videiro. "FPSO Hull Structures with Sandwich Plate System in Cargo Tanks". Applied Sciences (2022): https://doi.org/10.3390/app12199628.
    10.3390/app12199628
  16. Bai-Qiao CHEN. "Analytical study on the upheaval thermal buckling of sandwich pipes". Marine Structures 85 (2022): 103245-103245. http://dx.doi.org/10.1016/j.marstruc.2022.103245.
    10.1016/j.marstruc.2022.103245
  17. Bai-Qiao Chen; Bin Liu; C. Guedes Soares. "Experimental and numerical investigation on a double hull structure subject to collision". Ocean Engineering (2022): https://doi.org/10.1016/j.oceaneng.2022.111437.
    10.1016/j.oceaneng.2022.111437
  18. Bai-Qiao Chen; Paulo M. Videiro; C. Guedes Soares. "Opportunities and Challenges to Develop Digital Twins for Subsea Pipelines". Journal of Marine Science and Engineering 10 6 (2022): 739-739. https://doi.org/10.3390/jmse10060739.
    10.3390/jmse10060739
  19. Nan Zhao; Bai-Qiao Chen; Yan-Qiu Zhou; Zheng-Jie Li; Jia-Jun Hu; C. Guedes Soares. "Experimental and numerical investigation on the ultimate strength of a ship hull girder model with deck openings". Marine Structures (2022): https://doi.org/10.1016/j.marstruc.2022.103175.
    10.1016/j.marstruc.2022.103175
  20. Bai-Qiao Chen; Xinhu Zhang; C. Guedes Soares. "The effect of general and localized corrosions on the collapse pressure of subsea pipelines". Ocean Engineering 247 (2022): 110719-110719. https://doi.org/10.1016/j.oceaneng.2022.110719.
    10.1016/j.oceaneng.2022.110719
  21. Ruoxuan Li; Bai-Qiao Chen; C. Guedes Soares. "Effect of Ovality Length on Collapse Strength of Imperfect Sandwich Pipes Due to Local Buckling". Journal of Marine Science and Engineering 10 1 (2022): 12. https://doi.org/10.3390/jmse10010012.
    Open access • Published • 10.3390/jmse10010012
  22. Ruoxuan Li; Baiqiao Chen; C. Guedes Soares. "Design equation for the effect of ovality on the collapse strength of sandwich pipes". Ocean Engineering 235 (2021): 109367-109367. https://doi.org/10.1016/j.oceaneng.2021.109367.
    10.1016/j.oceaneng.2021.109367
  23. Bin Liu; Gang Wang; Baiqiao Chen; C. Guedes Soares. "Experimental numerical and analytical analysis of the penetration of a scaled double-hull tanker side structure". Marine Structures 78 (2021): 103018-103018. https://doi.org/10.1016/j.marstruc.2021.103018.
    10.1016/j.marstruc.2021.103018
  24. Chen, Bai-Qiao; Guedes Soares, C.. "Experimental and numerical investigation on welding simulation of long stiffened steel plate specimen". Marine Structures 75 (2021): 102824. http://dx.doi.org/10.1016/j.marstruc.2020.102824.
    10.1016/j.marstruc.2020.102824
  25. Zhang, X.; Chen, B.; Guedes Soares, C.. "Effect of non-symmetrical corrosion imperfection on the collapse pressure of subsea pipelines". Marine Structures 73 (2020): http://www.scopus.com/inward/record.url?eid=2-s2.0-85087701041&partnerID=MN8TOARS.
    10.1016/j.marstruc.2020.102806
  26. Bai-Qiao, Chen. "Numerical Investigation on Weld-Induced Imperfections in Aluminum Ship Plates". Journal of Offshore Mechanics and Arctic Engineering (2019): http://dx.doi.org/10.1115/1.4043778.
    10.1115/1.4043778
  27. Bai-Qiao Chen; Bin Liu; C. Guedes Soares. "Experimental and numerical investigation on the influence of stiffeners on the crushing resistance of web girders in ship grounding". Marine Structures 63 (2019): 351-363. https://doi.org/10.1016/j.marstruc.2018.10.003.
    10.1016/j.marstruc.2018.10.003
  28. Marzieh Hashemzadeh; Bai-Qiao Chen; C. Guedes Soares. "Evaluation of multi-pass welding-induced residual stress using numerical and experimental approaches". Ships and Offshore Structures (2018): 1-10. https://doi.org/10.1080/17445302.2018.1470453.
    10.1080/17445302.2018.1470453
  29. Bai-Qiao Chen; Marzieh Hashemzadeh; Carlos Guedes Soares. "Validation of numerical simulations with X-ray diffraction measurements of residual stress in butt-welded steel plates". Ships and Offshore Structures (2018): 1-10. https://doi.org/10.1080/17445302.2017.1368122.
    10.1080/17445302.2017.1368122
  30. Ringsberg, J.W.; Amdahl, J.; Chen, B.Q.; Cho, S.-R.; Ehlers, S.; Hu, Z.; Kubiczek, J.M.; et al. "MARSTRUCT benchmark study on nonlinear FE simulation of an experiment of an indenter impact with a ship side-shell structure". Marine Structures 59 (2018): 142-157. http://www.scopus.com/inward/record.url?eid=2-s2.0-85044343210&partnerID=MN8TOARS.
    10.1016/j.marstruc.2018.01.010
  31. Chen, B.-Q.; Guedes Soares, C.. "A Simplified Model for the Effect of Weld-Induced Residual Stresses on the Axial Ultimate Strength of Stiffened Plates". Journal of Marine Science and Application (2018): 1-11. http://www.scopus.com/inward/record.url?eid=2-s2.0-85044511338&partnerID=MN8TOARS.
    10.1007/s11804-018-0007-7
  32. Bai-Qiao, Chen; Guedes Soares, Carlos. "Effect of welding sequence on temperature distribution, distortions, and residual stress of stiffened plates". International Journal of Advanced Manufacturing Technology 86 (2016): 3145-3156.
    Published
  33. Chen, Bai-Qiao; Guedes Soares, C.. "Deformation measurements in welded plates based on close-range photogrammetry". Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture 230 4 (2016): 662-674. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000373948400006&KeyUID=WOS:000373948400006.
    10.1177/0954405414558734
  34. Wang, S.; Garbatov, Y.; Chen, B.; Guedes Soares, C.. "Dynamic structural response of perforated plates subjected to water impact load". Engineering Structures 125 (2016): 179-190. http://www.scopus.com/inward/record.url?eid=2-s2.0-84978891178&partnerID=MN8TOARS.
    10.1016/j.engstruct.2016.05.011
  35. Chen, B.-Q.; Guedes Soares, C.. "Numerical and experimental investigation on the weld-induced deformation and residual stress in stiffened plates with brackets". International Journal of Advanced Manufacturing Technology 86 9-12 (2016): 2723-2733. http://www.scopus.com/inward/record.url?eid=2-s2.0-84955616340&partnerID=MN8TOARS.
    10.1007/s00170-016-8347-4
  36. Chen, B.-Q.; Guedes Soares, C.. "Effects of plate configurations on the weld induced deformations and strength of fillet-welded plates". Marine Structures 50 (2016): 243-259. http://www.scopus.com/inward/record.url?eid=2-s2.0-84990861100&partnerID=MN8TOARS.
    10.1016/j.marstruc.2016.09.004
  37. Chen, B.-Q.; Guedes Soares, C.. "Effect of welding sequence on temperature distribution, distortions, and residual stress on stiffened plates". International Journal of Advanced Manufacturing Technology 86 9-12 (2016): 3145-3156. http://www.scopus.com/inward/record.url?eid=2-s2.0-84957627916&partnerID=MN8TOARS.
    10.1007/s00170-016-8448-0
  38. Hashemzadeh, M.; Chen, B. Q.; Guedes Soares, C.. "Numerical and experimental study on butt weld with dissimilar thickness of thin stainless steel plate". International Journal of Advanced Manufacturing Technology 78 1-4 (2015): 319-330. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000351517300027&KeyUID=WOS:000351517300027.
    10.1007/s00170-014-6597-6
  39. Chen, B. Q.; Hashemzadeh, M.; Garbatov, Y.; Soares, C. Guedes. "Numerical and parametric modeling and analysis of weld-induced residual stresses". International Journal of Mechanics and Materials in Design 11 4 (2015): 439-453. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000363490700006&KeyUID=WOS:000363490700006.
    10.1007/s10999-014-9269-7
  40. Chen, Bai-Qiao; Hashemzadeh, Marzieh; Guedes Soares, C.. "Numerical and experimental studies on temperature and distortion patterns in butt-welded plates". International Journal of Advanced Manufacturing Technology 72 5-8 (2014): 1121-1131. http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000336052400047&KeyUID=WOS:000336052400047.
    10.1007/s00170-014-5740-8
  41. Chen, B.Q.; Garbatov, Y.; Guedes, C.. "Measurement of weld-induced deformations in three-dimensional structures based on photogrammetry technique". Journal of Ship Production 27 2 (2011): 51-62. http://www.scopus.com/inward/record.url?eid=2-s2.0-82255162037&partnerID=MN8TOARS.

Other

Other output
  1. Experimental and Numerical Studies on the Axial Compression Behaviour of Stub Cold-Formed Steel Lipped Channels Experiencing Simulated Web Corrosion Damage. 2025. Zhong, L.; Jia, C.; Guo, L.; Garbatov, Y.; Chen, B.-Q.. http://www.scopus.com/inward/record.url?eid=2-s2.0-85216131766&partnerID=MN8TOARS.
    10.2139/ssrn.5099637
  2. Thermo-Mechanical Analysis of the Effects of Weld Parameters in Ship Plates during Welding Process. 2011. Chen, B.Q.; Adak, M.; Guedes Soares, C..
Activities

Oral presentation

Presentation title Event name
Host (Event location)
2020 Review of digital twin of ships and offshore structures 5th International Conference on Maritime Technology and Engineering
(Lisbon, Portugal)
2019 Numerical investigation on the influence of stiffeners on the crushing resistance of web girders in ship grounding 8th International Conference on Collision and Grounding of Ships and Offshore Structures (ICCGS2019)
(Lisbon, Portugal)
2018 Numerical Investigation on Weld Induced Imperfections in Aluminium Ship Plates 39th International Conference on Ocean, Offshore & Arctic Engineering (OMAE2018)
(Madrid, Spain)
2018 Recent developments in experimental and numerical assessments of welding-induced residual stresses 39th International Conference on Ocean, Offshore & Arctic Engineering (OMAE2018)
(Madrid, Spain)
2017 Numerical investigation on a side-shell structure subjected to collision impact load 6th International Conference on Marine Structures (MARSTRUCT 2017)
(Lisbon, Portugal)
2014 Study on ultimate strength of ship plates with calculated weld-induced residual stress 2nd International Conference on Maritime Technology and Engineering (MARTECH2014)
(Lisbon, Portugal)
2013 Numerical analysis of the effects of weld parameters on distortions and residual stresses in butt welded steel plates 15th International Congress of the International Maritime Association of the Mediterranean (IMAM2013)
(A Coruña, Spain)
2013 Comparison between different heat sources types in thin-plate welding simulation 15th International Congress of the International Maritime Association of the Mediterranean (IMAM2013)
(A Coruña, Spain)
2011 Numerical investigations to study the effect of weldparameters on the temperature-time history in steel plates 1st International Conference on Maritime Technology and Engineering (MARTECH2011)
2011 Mechanical properties assessment of specimens subjected to random non-uniform general corrosion and tensile load 1st International Conference on Maritime Technology and Engineering (MARTECH2011)

Supervision

Thesis Title
Role 		Degree Subject (Type)
Institution / Organization
2024 - 2025/01/16 Experimental study of bending capacity of steel pipes
Supervisor
 Engenharia Naval e Oceânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2025 - 2025 Analysis of ship collisions with offshore wind turbine foundations
Supervisor
 Engenharia Naval e Oceânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2024 - 2025 FEA of Impact Response on Ship Structures
Supervisor
 Engenharia Naval e Oceânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2024 - 2025 FE Simulation of Residual Stress and Distortion in Welded Joints of Offshore Platform Structures
Supervisor
 Engenharia Naval e Oceânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2024 - 2025 FEA of Burst Pressure in Subsea Pipelines with Consideration of Material Defects
Supervisor
 Engenharia Naval e Oceânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2024 - 2025 Structural analysis of a semi-submersible platform of FOWT
Supervisor
 Engenharia Naval e Oceânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2024 - 2025 Design and Analysis of Subsea Pipelines
Supervisor
 Engenharia Naval e Oceânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2024 - 2025 Effect of defects on the collapse strength of subsea pipelines
Supervisor
 Engenharia Naval e Oceânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2021 - 2021/12 FPSO hull structures with sandwich plates in cargo tanks
Co-supervisor
 Engenharia Naval e Oceânica (Master)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Event organisation

Event name
Type of event (Role) 		Institution / Organization
2022 - Current Session Chair for RENEW2022 and RENEW2024 conferences (2022)
Conference (Member of the Organising Committee)
2020 - Current Session Chair for MARTECH2020, MARTECH2022 and MARTECH 2024 Conferences (2020)
Conference (Member of the Organising Committee)
2025/01 - 2025/12 Organising Committee of MARSTRUCT2025 Conference (2025/05 - 2025/05)
Conference (Member of the Organising Committee)
 Universidade de Lisboa Instituto Superior Técnico, Portugal

Jury of academic degree

Topic
Role 		Candidate name (Type of degree)
Institution / Organization
2025/03/05 Safety and reliability of systems and equipment for offshore oil and gas production facilities
(Thesis) Arguer
 Utkarsh Bhardwaj (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal
2025 Dynamic response of ship structural components under repeated impacts
(Thesis) Arguer
 Xu He (PhD)
Universidade de Lisboa Instituto Superior Técnico, Portugal

Ad Hoc journal article review

Journal title (ISSN) Publisher
2021/05 - Current Journal of Marine Science and Engineering (2077-1312) MDPI
2021/04 - Current Ships and Offshore Structures (1744-5302) Taylor & Francis
2021/03 - Current International Journal of Pressure Vessels and Piping (0308-0161) Elsevier
2021/03 - Current Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (0954-4089) SAGE
2020/05 - Current Journal of Constructional Steel Research (0143-974X) Elsevier
2020/03 - Current Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (1464-4207) SAGE
2020/02 - Current Thin-Walled Structures (0263-8231) Elsevier
2019/10 - Current Marine Structures (0951-8339) Elsevier
2019/01 - Current Optics & Laser Technology (0030-3992) Elsevier
2018/09 - Current Journal of Marine Science and Application (1993-5048) Springer
2018/02 - Current Ocean Engineering (0029-8018) Elsevier
2017/02 - Current Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (0954-4054) SAGE

Association member

Society Organization name Role
2021/11 - 2023/11 Associate Board of Journal of Marine Science and Application (JMSA) Member

Committee member

Activity description
Role 		Institution / Organization
2022 - 2028 International Ship and Offshore Structures Congress (ISSC) Technical Committee III.1 Ultimate Strength
Member
2018 - 2022 Member of Specialist Committee V.3 Materials and Fabrication Technology in ISSC (International Ship and Offshore Structures Congress)
Member
 International Ship and Offshore Structures Congress, Canada

Course / Discipline taught

Academic session Degree Subject (Type) Institution / Organization
2023 - Current Technical Drafting for Shipbuilding Engenharia Naval e Oceânica (Licenciatura) Instituto Superior Técnico Departamento de Engenharia Mecânica, Portugal
2017 - Current Ocean Platforms Engenharia Naval e Oceânica (Mestrado) Universidade de Lisboa Instituto Superior Técnico, Portugal
2017 - Current Subsea Production Systems Engenharia Naval e Oceânica (Mestrado) Universidade de Lisboa Instituto Superior Técnico, Portugal

Evaluation committee

Activity description
Role 		Institution / Organization Funding entity
2024 - 2024 Evaluator/Reviewer for ERC Advanced Grants 2024
Evaluator

Journal scientific committee

Journal title (ISSN) Publisher
2024 - Current Brodogradnja (0007-215X)
2021/01 - Current Journal of Marine Science and Engineering (2077-1312) MDPI

Mentoring / Tutoring

Topic Student name
2023 - Current Tutor for undergraduate students undergraduate students at Tecnico Lisboa
Distinctions

Award

2015 Chinese Government Award for Outstanding PhD Students Abroad
China Scholarship Council, China

Title

2022 Member of ISSC 2025 III.1 Ultimate Strength
2018 Member of ISSC 2022 V.3 Materials and Fabrication Technology
International Ship and Offshore Structures Congress, Canada